What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 121 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 121 of 178

5340-12-300-5709
Handle Grip

123005709
E3-2005140: RNCC: 3 | RNVC: 2
E3-2005140: RNCC: 5 | RNVC: 9

16 Aug 1984

5340-12-196-4521
Bridge Clamp

121964521
C22117-A163-C7: RNCC: 3 | RNVC: 2
C22117A163C7: RNCC: 5 | RNVC: 2

7 Jul 1983

5340-12-321-0805
Electrical-Mechanical Equipment Post

123210805
VG95148B14XM8X32-ST: RNCC: 2 | RNVC: 2
WZ6B-5449: RNCC: 3 | RNVC: 2
VG95148B14XM8X32-ST: RNCC: 3 | RNVC: 2
WZ6B-5449/31504: RNCC: 5 | RNVC: 9
WZ6B-5449: RNCC: 5 | RNVC: 9
WZ6B-5449/31504: RNCC: 5 | RNVC: 9
WZ6B-5449: RNCC: 5 | RNVC: 9

26 Mar 1990

5340-12-388-1863
Manual Control Handle

123881863
GN302-78-M8-32-SW: RNCC: 3 | RNVC: 2
S1076-GN302-78-M8-32-SW: RNCC: 5 | RNVC: 2

1 Mar 2012

5340-12-371-2924
Mounting Plate

123712924
8350-0295: RNCC: 2 | RNVC: 2
8350-0295: RNCC: 3 | RNVC: 2

9 Mar 2007

5340-12-700-8897
Loop Clamp

127008897
2-12-15-6-2 CHIM.PAS. OST1 1112-: RNCC: 3 | RNVC: 1

6 Feb 1995

5340-12-356-9794
Lock-Release Lever

123569794
1030014-185500.002.0: RNCC: 3 | RNVC: 2

23 Apr 2002

5340-12-381-0337
Angle Bracket

123810337
5.017-573.0: RNCC: 3 | RNVC: 2

30 Dec 2009

5340-12-326-3794
Double Angle Bracket

123263794
4-182399: RNCC: 3 | RNVC: 2
499260: RNCC: 5 | RNVC: 2

9 Sep 1991

5340-12-326-5648
Bridge Clamp

123265648
2300232-973210.002.0: RNCC: 2 | RNVC: 2
1528585: RNCC: 3 | RNVC: 2
2300232-973210.002.0: RNCC: 5 | RNVC: 2

8 Oct 1991

5340-12-338-3909
Mending Plate

123383909
25704-270983.03.0: RNCC: 2 | RNVC: 2
25704-270983.03.0: RNCC: 3 | RNVC: 2

3 Jul 1995

5340-12-307-2325
Bridge Clamp

123072325
140-251100-904-0: RNCC: 3 | RNVC: 2

23 May 1986

5340-12-360-2776
Spring Tension Clip

123602776
701 971 848 C: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-12-192-9400
Spring Loaded Cylinder Fastener

121929400
3512 118 1278 1: RNCC: 3 | RNVC: 2
3512 118 1278: RNCC: 5 | RNVC: 2
351211812781: RNCC: 5 | RNVC: 2

7 Jun 1982

5340-12-701-8453
Loop Clamp

127018453
VG95211-ML-127018453: RNCC: 2 | RNVC: 2
5149A-62: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-310-2860
Helical Compression Spring Retainer

123102860
100442-0220: RNCC: 2 | RNVC: 2
100442-0220: RNCC: 3 | RNVC: 2

5 May 1987

5340-12-375-7806
Retaining Bail

123757806
4100036-181261.000: RNCC: 2 | RNVC: 2
4100036-181261.000: RNCC: 3 | RNVC: 2

3 Jul 2008

5340-12-185-3233
Mending Plate

121853233
8454868: RNCC: 3 | RNVC: 2
1105159: RNCC: 5 | RNVC: 2
1105-159: RNCC: 5 | RNVC: 2

30 Sep 1980

5340-12-192-7216
Resilient Mount

121927216
1341102500: RNCC: 3 | RNVC: 2
2K2-BAM-25-G1: RNCC: 5 | RNVC: 2
331933475: RNCC: 5 | RNVC: 2
B462K2BAM25G1: RNCC: 5 | RNVC: 2
2K2BAM25G1: RNCC: 5 | RNVC: 9
B462K2BAM25G1: RNCC: 5 | RNVC: 9
2K2-BAM-25-G1: RNCC: 5 | RNVC: 9
2K2BAM25G1: RNCC: 5 | RNVC: 9

17 May 1982

5340-12-162-5504
Electrical-Mechanical Equipment Post

121625504
C20136A114C660: RNCC: 3 | RNVC: 2
TDRUCK4T2660: RNCC: 5 | RNVC: 2
TFS72-55660: RNCC: 5 | RNVC: 2
C20136-A114-C660: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-193-8179
Pad Eye

121938179
C22136-A1000-C825: RNCC: 3 | RNVC: 2
C22136A1000C825: RNCC: 5 | RNVC: 2

2 Sep 1982

5340-12-320-6505
Loop Clamp

123206505
DIN3015-LH-2R-16-PP-W1: RNCC: 2 | RNVC: 2
216PP-SIG-AF: RNCC: 3 | RNVC: 2
HRL2D16PP STMBL: RNCC: 3 | RNVC: 2
RAPR18-216: RNCC: 3 | RNVC: 2
RAPR18-216: RNCC: 5 | RNVC: 2
DIN3015-LH2R-16PP-W1: RNCC: 5 | RNVC: 2

5 Feb 1990

5340-12-313-3316
Lock-Release Lever

123133316
999701-121300.08: RNCC: 3 | RNVC: 2

23 Mar 1988

5340-12-190-4953
Nonmetallic Bumper

121904953
SK-EK-0252.040.16: RNCC: 3 | RNVC: 2
SKEK0252-040-16: RNCC: 5 | RNVC: 2

1 Dec 1981

5340-12-171-1098
Electrical-Mechanical Equipment Post

121711098
N33-018: RNCC: 3 | RNVC: 2

9 Sep 1977

5340-12-163-9468
Turnbuckle

121639468
23290-041200: RNCC: 2 | RNVC: 2
23290-041200: RNCC: 3 | RNVC: 2
23290-041200: RNCC: 3 | RNVC: 2
23290-041200: RNCC: 5 | RNVC: 9
23290-041200: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-316-4759
Double Angle Bracket

123164759
22014.0.04.100.02: RNCC: 2 | RNVC: 2
22014.0.04.100.02: RNCC: 3 | RNVC: 2

19 Jan 1989

5340-12-386-6032
Mechanical Stop

123866032
2500262-394282.001.0: RNCC: 2 | RNVC: 2
2500262-394282.001.0: RNCC: 3 | RNVC: 2

15 Sep 2011

5340-12-199-0710
Electronic Equipment Hardware Kit

121990710
4900123-5000.00: RNCC: 2 | RNVC: 2
2-10.012: RNCC: 3 | RNVC: 2
4900123-5000.00: RNCC: 3 | RNVC: 2
4900123-5000.00: RNCC: 3 | RNVC: 2
4900123-5000.00: RNCC: 5 | RNVC: 2
4900123-5000.00: RNCC: 5 | RNVC: 9
4900123-5000.00: RNCC: 5 | RNVC: 9

23 Mar 1984

5340-12-383-4573
Mounting Plate

123834573
15004682-0: RNCC: 3 | RNVC: 2

22 Oct 2010

5340-12-334-4397
Angle Bracket

123344397
104-141000-903-0: RNCC: 2 | RNVC: 2
104-141000-903-0: RNCC: 3 | RNVC: 2

9 May 1994

5340-12-306-4010
Mending Plate

123064010
V22.917.33-1: RNCC: 3 | RNVC: 2

26 Feb 1986

5340-12-373-9673
Multiple Angle Bracket

123739673
L243M3807102: RNCC: 3 | RNVC: 2

3 Jan 2008

5340-12-178-6718
Dust And Moisture Seal Protective Cap

121786718
399900008: RNCC: 3 | RNVC: 2

9 May 1979

5340-12-191-8179
Clamping Catch

121918179
17L01-1X2AA: RNCC: 3 | RNVC: 2
704209477: RNCC: 5 | RNVC: 2
N15581: RNCC: 5 | RNVC: 2

8 Mar 1982

5340-12-346-2460
Spring Tension Clip

123462460
251774010003: RNCC: 3 | RNVC: 2
251774010003: RNCC: 5 | RNVC: 2
25 1774 01 00 03: RNCC: 5 | RNVC: 2
25 1774 01 00 03: RNCC: 5 | RNVC: 9

2 Jul 1998

5340-12-319-2130
Lock-Release Lever

123192130
7213.999.3: RNCC: 3 | RNVC: 2

14 Sep 1989

5340-12-338-4592
Turnbuckle

123384592
LN9185 L 07 M: RNCC: 2 | RNVC: 2
LN9185L07M: RNCC: 5 | RNVC: 2
LN9185M7: RNCC: 5 | RNVC: 9

13 Jul 1995

5340-12-348-1613
Mounting Bracket

123481613
2300262-970492.000.0: RNCC: 2 | RNVC: 2
2300262-970492.000.0: RNCC: 3 | RNVC: 2
1899689: RNCC: 5 | RNVC: 2

27 Apr 1999

5340-12-306-9237
Rod End Clevis

123069237
6115985-5: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-12-154-3965
Bow Handle

121543965
R60-3: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-335-7796
Butt Hinge

123357796
2782-360100.009.0: RNCC: 2 | RNVC: 2
2782-360100.009.0: RNCC: 3 | RNVC: 2

15 Sep 1994

5340-12-367-0444
Mounting Bracket

123670444
PIKVI30VA: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-12-131-5602

5340-12-162-4509
Extension Drawer Slide

121624509
5800748-1167.001: RNCC: 3 | RNVC: 2
5800748-1167-001: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-186-2961
Clamping Catch

121862961
PAN5104-091188: RNCC: 3 | RNVC: 2

13 Dec 1980

5340-12-337-9956
Double Angle Bracket

123379956
68187-341: RNCC: 3 | RNVC: 2
68187: RNCC: 5 | RNVC: 2

9 May 1995

5340-12-359-8649
Butt Hinge Leaf

123598649
2500261-180275.000.0: RNCC: 2 | RNVC: 2
2500261-180275.000.0: RNCC: 3 | RNVC: 2

17 Mar 2003

5340-12-180-6339
Mending Plate

121806339
C320-A62-C78: RNCC: 2 | RNVC: 2
C320A62C78: RNCC: 3 | RNVC: 2
C320-A62-C78: RNCC: 5 | RNVC: 2
C320-A62-C78: RNCC: 5 | RNVC: 2
C320A62C78: RNCC: 5 | RNVC: 2

24 Sep 1979

5340-12-381-3322
Bumper

123813322
89003405: RNCC: 3 | RNVC: 2
106/2914-01-10-02: RNCC: 5 | RNVC: 2

3 Feb 2010

5340-12-195-6993
Air Inlet-Outlet Frame

121956993
CF 307 235 A: RNCC: 3 | RNVC: 2
CF 307 235 A: RNCC: 5 | RNVC: 2
CF307235A: RNCC: 5 | RNVC: 2
CF307235A: RNCC: 5 | RNVC: 2
CF307235A: RNCC: 5 | RNVC: 2

30 Mar 1983

5340-12-305-8104
Extension Drawer Slide

123058104
BD9101E614: RNCC: 3 | RNVC: 2
BD9101E614: RNCC: 5 | RNVC: 9

17 Dec 1985

5340-12-308-6029
Clamping Catch

123086029
7162101: RNCC: 3 | RNVC: 2

28 Oct 1986

5340-12-358-2562
Retaining Strap

123582562
C42107A205C46: RNCC: 3 | RNVC: 2

2 Oct 2002

5340-12-135-6766

5340-12-136-7721
Loop Clamp

121367721
3039950101: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-319-6736
Mending Plate

123196736
101-35: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-12-333-5106
Mounting Plate

123335106
388542: RNCC: 3 | RNVC: 2

28 Dec 1993

5340-12-389-2076
Mortise Lock

123892076
110237: RNCC: 3 | RNVC: 2

6 Jun 2012

5340-12-177-1700
Resilient Mount

121771700
6011: RNCC: 3 | RNVC: 9

17 Jan 1979

5340-12-364-9617
Mounting Bracket

123649617
T311M1183101: RNCC: 3 | RNVC: 2

19 Nov 2004

5340-12-331-0142
Extension Drawer Slide

123310142
69000-747: RNCC: 3 | RNVC: 2

11 Mar 1993

5340-12-334-9749
Access Cover

123349749
70296: RNCC: 3 | RNVC: 2

7 Jul 1994

5340-12-156-7963
Spring Tension Clip

121567963
6174172: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-371-9763
Angle Bracket

123719763
5802017-721300.01: RNCC: 2 | RNVC: 2
5802017-721300.01: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-12-134-9872

5340-12-179-5412
Mending Plate

121795412
CF418602A: RNCC: 3 | RNVC: 2
CF418602A: RNCC: 5 | RNVC: 2
CF 418 602 A: RNCC: 5 | RNVC: 2
CF 418 602 A: RNCC: 5 | RNVC: 2
CF418602A: RNCC: 5 | RNVC: 2
CF 418 602 A: RNCC: 5 | RNVC: 2

6 Jul 1979

5340-12-093-6686

5340-12-384-6768
Angle Bracket

123846768
1-651225: RNCC: 3 | RNVC: 2

18 Mar 2011

5340-12-335-3759
Cremone Bolt

123353759
2200 OHNE ZUBEHOER: RNCC: 3 | RNVC: 2
10 0050 148: RNCC: 5 | RNVC: 2
100050148: RNCC: 5 | RNVC: 2

15 Aug 1994

5340-12-365-1192
Nut And Bolt Locking Plate

123651192
4633530540: RNCC: 3 | RNVC: 2

30 Nov 2004

5340-12-323-5421
Protection Bellows

123235421
1837M0LERITTH50: RNCC: 3 | RNVC: 2
91551999: RNCC: 5 | RNVC: 2

5 Dec 1990

5340-12-185-8787
Rigid Caster

121858787
01TC33332: RNCC: 3 | RNVC: 2

6 Nov 1980

5340-12-152-2181
Buckle

121522181
DIN5292-32-ST-GELBOLIV: RNCC: 2 | RNVC: 2
32DIN5292ST0LIV: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-198-2795
Plain Solid Disk

121982795
5801433-030000.03.0: RNCC: 2 | RNVC: 2
5801433-030000.03.0: RNCC: 3 | RNVC: 2
5801433-030000-03-0: RNCC: 5 | RNVC: 2

10 Jan 1984

5340-12-339-7914
Mounting Plate

123397914
96.4.309.0004: RNCC: 2 | RNVC: 2
SP21586: RNCC: 3 | RNVC: 2
96.4.309.0004: RNCC: 5 | RNVC: 9

18 Jan 1996

5340-12-359-2483
Mounting Bracket

123592483
8-420011.000: RNCC: 2 | RNVC: 2
8-420011.000: RNCC: 3 | RNVC: 2
9943237: RNCC: 5 | RNVC: 2

15 Jan 2003

5340-12-318-9372
Support Hook

123189372
23176-262194.02.0: RNCC: 3 | RNVC: 2
23176-262194.02.0: RNCC: 5 | RNVC: 9

25 Aug 1989

5340-12-197-9130
Angle Bracket

121979130
CF 478 236 B: RNCC: 3 | RNVC: 2
CF 478 236 B: RNCC: 5 | RNVC: 2
CF 478 236 A: RNCC: 5 | RNVC: 2
CF 478 236 A: RNCC: 5 | RNVC: 2

1 Dec 1983

5340-12-130-0604
Support Hook

121300604
2041069: RNCC: 3 | RNVC: 2
03053: RNCC: 5 | RNVC: 9
204 106 9: RNCC: 5 | RNVC: 9
AH6: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-344-7440
Key Blank

123447440
656 L: RNCC: 3 | RNVC: 2

3 Dec 1997

5340-12-392-3295
Mounting Plate

123923295
4100095-982150.004.0: RNCC: 2 | RNVC: 2
4100095-982150.004.0: RNCC: 3 | RNVC: 2

27 May 2013

5340-12-197-6757
Angle Bracket

121976757
A-296829-005: RNCC: 3 | RNVC: 2
A296829-005: RNCC: 5 | RNVC: 2

14 Nov 1983

5340-12-304-0730
Retaining Strap

123040730
DIN3016-1-F1-17X12-W1-2-CR: RNCC: 2 | RNVC: 2
RSGU2.17/12: RNCC: 3 | RNVC: 2
DIN3016-F1-17X12-W1-2: RNCC: 3 | RNVC: 2
9420012017: RNCC: 5 | RNVC: 2
RSGU1200.17/12: RNCC: 5 | RNVC: 2
4340971: RNCC: 5 | RNVC: 2
DIN3016-F1-17X12-W1-2: RNCC: 5 | RNVC: 9
VG95931-F17X12-W1: RNCC: 5 | RNVC: 9

10 Jun 1985

5340-12-313-2474
Mounting Bracket

123132474
2382-181840.00.0: RNCC: 2 | RNVC: 2
2382-181840.00.0: RNCC: 3 | RNVC: 2
2382-181840.00.0: RNCC: 5 | RNVC: 2
129 5676: RNCC: 5 | RNVC: 2

15 Mar 1988

5340-12-701-8469
Loop Clamp

127018469
VG95211-ML-127018469: RNCC: 2 | RNVC: 2
5156A-20: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-366-3048
Butt Hinge

123663048
DIN7956-32X1,5-30-NR.ST-BK-U: RNCC: 2 | RNVC: 2

7 Apr 2005

5340-12-359-4364
Loop Clamp

123594364
DIN3016-1-E1-20X15-W1-2-NBR: RNCC: 2 | RNVC: 2

5 Feb 2003

5340-12-702-8592
Permanent Magnet

127028592
53-04045003224: RNCC: 2 | RNVC: 2

5 Jan 1996

5340-12-334-5544
Retaining Band

123345544
1000214-11333.10: RNCC: 2 | RNVC: 2
IR0111-00000WR2-00.10: RNCC: 3 | RNVC: 2

24 May 1994

5340-12-156-6284
Compression Cup

121566284
T56-1 56X26X20/5-88NBR/101: RNCC: 3 | RNVC: 2
T56-1: RNCC: 5 | RNVC: 2
T56-1-88NBR101: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-353-7867
Expansion Plug

123537867
11 41 1 342 761: RNCC: 3 | RNVC: 2

10 May 2001

5340-12-372-5701
Protection Bellows

123725701
20.01588.0: RNCC: 3 | RNVC: 2
9424620596: RNCC: 5 | RNVC: 2
A9424620596: RNCC: 5 | RNVC: 2

30 Jul 2007

5340-12-362-2780
Mounting Bracket

123622780
0318913900: RNCC: 3 | RNVC: 2
3KK894: RNCC: 5 | RNVC: 2
03.189.13.90.0: RNCC: 5 | RNVC: 2

2 Feb 2004

5340-12-701-7395
Loop Clamp

127017395
VG95211-ML-127017395: RNCC: 2 | RNVC: 2
5.12.7611.0031.13: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-186-7681
Dust And Moisture Seal Protective Cap

121867681
250/95: RNCC: 3 | RNVC: 2
GPN250/95: RNCC: 5 | RNVC: 2
GPN250-95: RNCC: 5 | RNVC: 2
SP03477: RNCC: 5 | RNVC: 2
250095000: RNCC: 5 | RNVC: 9
GPN250-95: RNCC: 5 | RNVC: 9
00.4.623.0676: RNCC: 5 | RNVC: 9

2 Feb 1981

5340-12-361-0881
Runner

123610881
2300223-062630.02.0: RNCC: 2 | RNVC: 2
2300223-062630.02.0: RNCC: 3 | RNVC: 2

20 Aug 2003

5340-12-344-2438
Access Cover

123442438
2500255-531420.000.0: RNCC: 2 | RNVC: 2
2500255-531420.000.0: RNCC: 3 | RNVC: 2

7 Oct 1997

5340-12-306-0744
Mending Plate

123060744
5801984-982500.002.0: RNCC: 2 | RNVC: 2
5801984-982500.002.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-392-6701
Spring Loaded Cylinder Fastener

123926701
GN608.1-8-8: RNCC: 3 | RNVC: 2

27 Jun 2013

5340-12-330-0983
Mounting Bracket

123300983
537172-2231.000: RNCC: 2 | RNVC: 2
537172-2231.000: RNCC: 3 | RNVC: 2
537172-2231.000: RNCC: 5 | RNVC: 9

3 Nov 1992

5340-12-333-8698
Access Cover

123338698
404-6: RNCC: 3 | RNVC: 2

18 Feb 1994

5340-12-388-4391
Access Cover

123884391
1030124-971013.000.0: RNCC: 3 | RNVC: 2

22 Mar 2012

5340-12-353-9252
Hand Crank

123539252
110.210.6: RNCC: 3 | RNVC: 2

18 May 2001

5340-12-307-4142
Mending Plate

123074142
151-252000-906-0: RNCC: 3 | RNVC: 2

13 Jun 1986

5340-12-359-8314
Webbing Strap

123598314
2800-970040.000.0: RNCC: 2 | RNVC: 2
2800-970040.000.0: RNCC: 3 | RNVC: 2

13 Mar 2003

5340-12-356-5098
Webbing Strap

123565098
S0000031: RNCC: 3 | RNVC: 2

7 Mar 2002

5340-12-301-1970
Angle Bracket

123011970
TK5340-039: RNCC: 2 | RNVC: 2
M1513 8820: RNCC: 3 | RNVC: 2
1513-882.20(3): RNCC: 5 | RNVC: 9
TK-BA35-5340-365: RNCC: 5 | RNVC: 9

27 Sep 1984

5340-12-702-5134
Rod End Connector

127025134
VG95211-ML-127025134: RNCC: 2 | RNVC: 2
5.51.6501.1380.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-150-3484
Mending Plate

121503484
C20234-A18-C199: RNCC: 3 | RNVC: 2
C20234A18C199: RNCC: 5 | RNVC: 2
TFS70-05481: RNCC: 5 | RNVC: 9
TFS72-63199: RNCC: 5 | RNVC: 9
TLOCH18T199: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-359-8472
Dust And Moisture Seal Protective Plug

123598472
300F14RAL3000: RNCC: 3 | RNVC: 2
300F141RAL3000: RNCC: 5 | RNVC: 2
300F14ROT: RNCC: 5 | RNVC: 2
GPN300-F141RAL3000: RNCC: 5 | RNVC: 2
GPN300F141R0UGE: RNCC: 5 | RNVC: 2
GPN300F141ROUGE: RNCC: 5 | RNVC: 2

13 Mar 2003

5340-12-343-9496
Spacing Threaded Standoff

123439496
35627131: RNCC: 3 | RNVC: 2
C41107-A467-C345: RNCC: 3 | RNVC: 2
VG95148C5,5XM3X16-NRST: RNCC: 5 | RNVC: 2
C41107A467C345: RNCC: 5 | RNVC: 2

19 Aug 1997

5340-12-154-5692
Leather Strap

121545692
C40196A22B12: RNCC: 3 | RNVC: 2
RELKAB22TZ12: RNCC: 5 | RNVC: 2
C40196-A22-B12: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-196-0116
Resilient Mount

121960116
0002350090: RNCC: 3 | RNVC: 2
0002350090: RNCC: 5 | RNVC: 2
0002350090: RNCC: 5 | RNVC: 2
K60721/24N: RNCC: 5 | RNVC: 9
60721WEICH: RNCC: 5 | RNVC: 9
K60721/24N: RNCC: 5 | RNVC: 9
K60721/45SHORE: RNCC: 5 | RNVC: 9
000-235-00-90: RNCC: 5 | RNVC: 9

16 May 1983

5340-12-199-5135
Dust And Moisture Seal Protective Cap

121995135
480-100.09: RNCC: 3 | RNVC: 2

8 May 1984

5340-12-195-3064
Electrical-Mechanical Equipment Post

121953064
VG95148B5,5XM3X30-ST: RNCC: 2 | RNVC: 2
VG95148B5,5XM3X30-ST: RNCC: 3 | RNVC: 2
18H286: RNCC: 3 | RNVC: 2
18H286: RNCC: 5 | RNVC: 9

7 Feb 1983

5340-12-178-7890
Retaining Strap

121787890
1121-45021.71: RNCC: 3 | RNVC: 2
1121-45021-71: RNCC: 5 | RNVC: 2

16 May 1979

5340-12-322-1423
Access Cover

123221423
5801114-56.001: RNCC: 3 | RNVC: 2

27 Jul 1990

5340-12-314-7702
Bridge Clamp

123147702
615.06-01-02-00-007: RNCC: 3 | RNVC: 2

9 Aug 1988

5340-12-183-2766
Helical Compression Spring Seat

121832766
CF417420A: RNCC: 3 | RNVC: 2
CF 417 420 A: RNCC: 5 | RNVC: 2
CF417420A: RNCC: 5 | RNVC: 2
CF 417 420 A: RNCC: 5 | RNVC: 2
CF417420A: RNCC: 5 | RNVC: 2
CF 417 420 A: RNCC: 5 | RNVC: 2

3 Apr 1980

5340-12-177-2819
Angle Bracket

121772819
1-1-4105: RNCC: 3 | RNVC: 2

24 Jan 1979

5340-12-179-8387
Angle Bracket

121798387
CF418645B: RNCC: 3 | RNVC: 2
CF 418 645 B: RNCC: 3 | RNVC: 2
CF 418 645 B: RNCC: 5 | RNVC: 2
CF418645B: RNCC: 5 | RNVC: 2
CF 418 645 B: RNCC: 5 | RNVC: 2
CF418645B: RNCC: 5 | RNVC: 2

3 Aug 1979

5340-12-319-5051
Detent Plunger

123195051
4900059-751797.002.0: RNCC: 3 | RNVC: 2
1227997: RNCC: 5 | RNVC: 2

6 Oct 1989

5340-12-367-4403
Loop Clamp

123674403
883 8: RNCC: 3 | RNVC: 2

18 Aug 2005

5340-12-305-3798
Retaining Strap

123053798
50.4.5670: RNCC: 3 | RNVC: 2

29 Oct 1985

5340-12-365-8527
Retaining Clip

123658527
05044901: RNCC: 3 | RNVC: 2

14 Feb 2005

5340-12-195-7772
Expansion Shield

121957772
3350018: RNCC: 3 | RNVC: 2
0019944245: RNCC: 5 | RNVC: 2
S 721 1 83 029 1: RNCC: 5 | RNVC: 9

18 Apr 1983

5340-12-126-6322
Retaining Strap

121266322
2217082: RNCC: 3 | RNVC: 2
5030: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-319-4607
Mending Plate

123194607
374722: RNCC: 3 | RNVC: 2

4 Oct 1989

5340-12-378-2339
Access Cover

123782339
AZ8149T294: RNCC: 3 | RNVC: 2

20 Mar 2009

5340-12-361-0956
Angle Bracket

123610956
160.31.0420: RNCC: 3 | RNVC: 2

21 Aug 2003

5340-12-386-2453
Access Cover

123862453
2500318-749200.000.0: RNCC: 2 | RNVC: 2
2500318-749200.000.0: RNCC: 3 | RNVC: 2

18 Aug 2011

5340-12-343-8277
Nonmetallic Bumper

123438277
4.2220: RNCC: 3 | RNVC: 2
2695433: RNCC: 5 | RNVC: 2

4 Aug 1997

5340-12-335-2581
Mounting Bracket

123352581
F6 20001 276122: RNCC: 3 | RNVC: 2
F 627 61 22: RNCC: 5 | RNVC: 2
F6276122: RNCC: 5 | RNVC: 2

1 Aug 1994

5340-12-150-7262

5340-12-135-3832

5340-12-307-7040
Mending Plate

123077040
RP988680: RNCC: 3 | RNVC: 2

17 Jul 1986

5340-12-355-3680
Access Cover

123553680
1667491: RNCC: 3 | RNVC: 2

7 Nov 2001

5340-12-325-7838
Support Hook

123257838
3662230641: RNCC: 3 | RNVC: 2

9 Jul 1991

5340-12-186-5017
Nonmetallic Bumper

121865017
344012252: RNCC: 3 | RNVC: 2

9 Jan 1981

5340-12-155-1765
Butt Hinge Leaf

121551765
160-25337-60: RNCC: 3 | RNVC: 2
160-25337-60: RNCC: 5 | RNVC: 2
160-25337-60: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-172-1337
Support Hook

121721337
4955: RNCC: 3 | RNVC: 2

22 Dec 1977

5340-12-316-1231
Mounting Bracket

123161231
6203000636: RNCC: 3 | RNVC: 2
620 300 06 36: RNCC: 5 | RNVC: 2

23 Dec 1988

5340-12-327-3738
Mending Plate

123273738
190470: RNCC: 3 | RNVC: 2

15 Jan 1992

5340-12-343-5530
Angle Bracket

123435530
56011300020: RNCC: 3 | RNVC: 2
F300 0T 022 5259: RNCC: 6 | RNVC: 9

2 Jul 1997

5340-12-384-2564
Spacing Threaded Standoff

123842564
05.30.309: RNCC: 3 | RNVC: 2
89532799: RNCC: 5 | RNVC: 2
1030-7174: RNCC: 5 | RNVC: 2

8 Feb 2011

5340-12-385-2891
Access Cover

123852891
5500982943: RNCC: 3 | RNVC: 2

18 May 2011

5340-12-318-9609
Spring Tension Clip

123189609
14578385: RNCC: 3 | RNVC: 2
14578385EY1107-62: RNCC: 5 | RNVC: 2

28 Aug 1989

5340-12-375-4516
Mounting Bracket

123754516
1520645: RNCC: 3 | RNVC: 2

4 Jun 2008

5340-12-175-1852
Angle Bracket

121751852
03416088: RNCC: 3 | RNVC: 2
3416088EE5022-71: RNCC: 5 | RNVC: 2

30 Aug 1978

5340-12-390-0502
Grooved Clamp Coupling Sleeve

123900502
103119: RNCC: 3 | RNVC: 2

27 Sep 2012

5340-12-369-0393
Angle Bracket

123690393
7803221102AA: RNCC: 3 | RNVC: 2
1030010-721000.002.0: RNCC: 5 | RNVC: 2

16 May 2006

5340-12-366-1263
Angle Bracket

123661263
1837-190800.031.0: RNCC: 3 | RNVC: 2

10 Mar 2005

5340-12-343-9872
Spring Tension Clip

123439872
330206-4003.000: RNCC: 3 | RNVC: 2
330206-4003.000: RNCC: 5 | RNVC: 9

22 Aug 1997

5340-12-334-2240
Mounting Bracket

123342240
66.3567.508.00-A001: RNCC: 3 | RNVC: 2

14 Apr 1994

5340-12-340-0804
Buckle

123400804
P20572: RNCC: 3 | RNVC: 2

26 Feb 1996

5340-12-336-9873
Mounting Bracket

123369873
8400180103: RNCC: 3 | RNVC: 2
84001 80103: RNCC: 5 | RNVC: 9

5 Jan 1995

5340-12-338-0273
Retaining Strap

123380273
9312110: RNCC: 3 | RNVC: 2
25 005 1000 01 001: RNCC: 5 | RNVC: 2

12 May 1995

5340-12-330-0708
Retaining Strap

123300708
03159200: RNCC: 3 | RNVC: 2
110720: RNCC: 5 | RNVC: 9

29 Oct 1992

5340-12-320-2481
Helical Compression Spring Seat

123202481
7329006: RNCC: 3 | RNVC: 2

21 Dec 1989

5340-12-352-9052
Access Cover

123529052
1246 308 018: RNCC: 3 | RNVC: 2
81.32810.0037: RNCC: 5 | RNVC: 2
81328100037: RNCC: 5 | RNVC: 2

4 Jan 2001

5340-12-190-9389
Loop Clamp

121909389
4035040138: RNCC: 3 | RNVC: 2

23 Dec 1981

5340-12-356-1477
Retaining Strap

123561477
6020780335: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-12-360-0536
Sealing Plug Assembly

123600536
01504800: RNCC: 3 | RNVC: 2
05722522: RNCC: 5 | RNVC: 2

1 Apr 2003

5340-12-319-0249
Dust And Moisture Seal Protective Plug

123190249
05755291: RNCC: 3 | RNVC: 2

30 Aug 1989

5340-12-304-7581
Angle Bracket

123047581
537161-8234.000: RNCC: 3 | RNVC: 2
021.451553: RNCC: 5 | RNVC: 2
537161-8234.000: RNCC: 5 | RNVC: 9

19 Aug 1985

5340-12-372-9676
Access Cover

123729676
NO PRIMARY REF 12-372-9676: RNCC: 3 | RNVC: 2
7092113: RNCC: 5 | RNVC: 2

12 Sep 2007

5340-12-182-6293
Rod End Connector

121826293
160-23452-03: RNCC: 3 | RNVC: 2
160-23452-03: RNCC: 5 | RNVC: 9

20 Feb 1980

5340-12-190-2804
Electrical-Mechanical Equipment Post

121902804
468.8752: RNCC: 3 | RNVC: 2
4688752: RNCC: 5 | RNVC: 2
5801443-140000-004: RNCC: 5 | RNVC: 9

17 Nov 1981

5340-12-363-1128
Mounting Plate

123631128
598101-252000.010.0: RNCC: 3 | RNVC: 2

5 May 2004

5340-12-360-8878
Mortise Lock Set

123608878
DL1L-WX11.20.9/11 MIT RIEGEL-V2A: RNCC: 3 | RNVC: 2
DL1.L-X11.20.9/11W-RVS ROL/PEN: RNCC: 5 | RNVC: 2

21 Jul 2003

5340-12-171-2718
Helical Compression Spring Seat

121712718
VG95211-ML-121712718: RNCC: 2 | RNVC: 2
38.004.26.843: RNCC: 3 | RNVC: 2
38-004-26-843: RNCC: 5 | RNVC: 2

23 Sep 1977

5340-12-194-8879
Nonmetallic Bumper

121948879
2500125-160000.06: RNCC: 2 | RNVC: 2
2500125-160000.06: RNCC: 3 | RNVC: 2
2500125-160000.06: RNCC: 3 | RNVC: 2
2500125-160000.06: RNCC: 3 | RNVC: 2
2500125-160000.06: RNCC: 5 | RNVC: 2
2500125-160000-06: RNCC: 5 | RNVC: 2
2500125-160000.06: RNCC: 5 | RNVC: 9
2500125-160000-06: RNCC: 5 | RNVC: 9
2500125-160000.06: RNCC: 5 | RNVC: 9
2500125-160000.06: RNCC: 5 | RNVC: 9

15 Dec 1982

5340-12-308-2956
Spring Tension Clip

123082956
00584-10100-11-000: RNCC: 3 | RNVC: 2

24 Sep 1986

5340-12-343-9242
Handle Grip

123439242
9266037: RNCC: 3 | RNVC: 2
124-9266037: RNCC: 5 | RNVC: 2
886 001 1400 00 000: RNCC: 5 | RNVC: 2

13 Aug 1997

5340-12-313-3335
Mounting Bracket

123133335
5803616-3300: RNCC: 2 | RNVC: 2
7802060330: RNCC: 3 | RNVC: 2
78020 60330: RNCC: 5 | RNVC: 9

23 Mar 1988

5340-12-700-9162
Angle Bracket

127009162
VG95211-ML-127009162: RNCC: 2 | RNVC: 2
2.51.0254.9602.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-182-4235
Butt Hinge Leaf

121824235
B32X3X96HAN16515-3-3214-7: RNCC: 3 | RNVC: 2

1 Feb 1980

5340-12-386-1348
Access Cover

123861348
2500261-183580.000.0: RNCC: 3 | RNVC: 2

10 Aug 2011

5340-12-313-8575
Mounting Bracket

123138575
867072906: RNCC: 3 | RNVC: 2
23305-312000.87.0: RNCC: 5 | RNVC: 9

12 May 1988

5340-12-352-5701
Spacing Threaded Standoff

123525701
5.03.681: RNCC: 3 | RNVC: 2

28 Nov 2000

5340-12-368-1486
Mechanic Equipment Hardware Kit

123681486
6.376-726.0: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-12-190-5800
Metal Runner

121905800
CF 420 995 A: RNCC: 3 | RNVC: 2
CF 420 995 A: RNCC: 5 | RNVC: 2
CF420995A: RNCC: 5 | RNVC: 2
CF420995A: RNCC: 5 | RNVC: 2

7 Dec 1981

5340-12-358-6959
Mounting Bracket

123586959
2500262-733000.016.0: RNCC: 2 | RNVC: 2
2500262-733000.016.0: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-12-302-5990
Double Angle Bracket

123025990
1-2623-5-3: RNCC: 2 | RNVC: 2
1-2623-5-3: RNCC: 3 | RNVC: 2

16 Jan 1985

5340-12-374-7386
Dust And Moisture Seal Protective Cap

123747386
0.0.026.37: RNCC: 3 | RNVC: 2

12 Mar 2008

5340-12-198-0455
Angle Bracket

121980455
C42080-A6-C54: RNCC: 3 | RNVC: 2

14 Dec 1983

5340-12-387-3884
Spring Tension Clip

123873884
D4090803-BUND: RNCC: 3 | RNVC: 2

7 Dec 2011

5340-12-178-0043
Bow Handle

121780043
5801225-29000: RNCC: 2 | RNVC: 2
5801225-29000: RNCC: 3 | RNVC: 2
5801225-29000: RNCC: 3 | RNVC: 2
5801225-29000: RNCC: 5 | RNVC: 9
5801225-29000: RNCC: 5 | RNVC: 9

14 Mar 1979

5340-12-702-2182
Angle Bracket

127022182
VG95211-ML-127022182: RNCC: 2 | RNVC: 2
30.7225.17: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-318-5123
Webbing Strap

123185123
5802086-21720: RNCC: 2 | RNVC: 2
5802086-21720: RNCC: 3 | RNVC: 2
000-D5-25X2,0X625-PE-RAL6031: RNCC: 6 | RNVC: 9

21 Jul 1989

5340-12-300-8199
Strap Fastener Loop

123008199
5802017-321000.06: RNCC: 2 | RNVC: 2
5802017-321000.06: RNCC: 3 | RNVC: 2

1 Sep 1984

5340-12-327-1646
Mounting Plate

123271646
P.FK01.5000.02: RNCC: 3 | RNVC: 2

10 Dec 1991

5340-12-316-6746
Double Angle Bracket

123166746
5800777-8621: RNCC: 2 | RNVC: 2
5800777-8621: RNCC: 3 | RNVC: 2

1 Feb 1989

5340-12-337-3643
Mounting Bracket

123373643
81153015016: RNCC: 3 | RNVC: 2
81.15301.5016: RNCC: 5 | RNVC: 2

21 Feb 1995

5340-12-386-2602
Access Cover

123862602
2500318-199210.000.0: RNCC: 3 | RNVC: 2

19 Aug 2011

5340-12-372-8886
Runner

123728886
5803948-250790.01: RNCC: 2 | RNVC: 2
4010706-250790.01: RNCC: 3 | RNVC: 2
1123090: RNCC: 5 | RNVC: 2

3 Sep 2007

5340-12-147-4116
Dust And Moisture Seal Protective Plug

121474116
SZM8FVA1060-2: RNCC: 3 | RNVC: 2
SZM8FVA1060-2: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-176-1317
Dust And Moisture Seal Protective Plug

121761317
CF 413 493 A: RNCC: 2 | RNVC: 2
CF413493A: RNCC: 3 | RNVC: 2
CF 413 493 A: RNCC: 5 | RNVC: 2
CF 413 493 A: RNCC: 5 | RNVC: 2
CF413493A: RNCC: 5 | RNVC: 2
CF 413 493 A: RNCC: 5 | RNVC: 2

9 Nov 1978

5340-12-377-1872
Mounting Bracket

123771872
8605001.3.480.01: RNCC: 3 | RNVC: 2

16 Dec 2008

5340-12-356-1220
Casement Fastener

123561220
6001.5.105.00: RNCC: 3 | RNVC: 2

24 Jan 2002

5340-12-320-9467
Dust And Moisture Seal Boot

123209467
32731242495: RNCC: 3 | RNVC: 2

8 Mar 1990

5340-12-011-5106

5340-12-380-9886
Electromagnetic Lock

123809886
3711687: RNCC: 3 | RNVC: 2

18 Dec 2009

5340-12-367-9069
Access Cover

123679069
537239-8095.000: RNCC: 3 | RNVC: 2

3 Nov 2005

5340-12-370-5754
Nut And Bolt Locking Plate

123705754
4039940630: RNCC: 3 | RNVC: 2

23 Nov 2006

5340-12-321-9126
Mounting Bracket

123219126
02491454: RNCC: 3 | RNVC: 2
2491454K5021-68: RNCC: 5 | RNVC: 2

9 Jul 1990

5340-12-383-5924
Manual Control Handle

123835924
864005006: RNCC: 3 | RNVC: 2

11 Nov 2010

5340-12-192-7511
Butt Hinge

121927511
DIN7955-B30-ST-BK: RNCC: 2 | RNVC: 2
SB30DIN7955: RNCC: 5 | RNVC: 2
B81542: RNCC: 5 | RNVC: 2

17 May 1982

5340-12-340-5183
Access Cover

123405183
11.01288-0004: RNCC: 3 | RNVC: 2
11.01288-0004: RNCC: 5 | RNVC: 2
11.01288-0004: RNCC: 5 | RNVC: 2

25 Apr 1996

5340-12-320-8552
Mounting Bracket

123208552
2654-330261.00: RNCC: 2 | RNVC: 2
2654-330261.00: RNCC: 3 | RNVC: 2
679-00150100: RNCC: 5 | RNVC: 9
2654-330 261.00: RNCC: 5 | RNVC: 9
679-00150100: RNCC: 5 | RNVC: 9

28 Feb 1990

5340-12-306-8973
Angle Bracket

123068973
5900062-30600.02: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-12-374-2666
Manual Control Lever

123742666
L521M3041209: RNCC: 3 | RNVC: 2

1 Feb 2008

5340-12-308-1410
Retaining Strap

123081410
4016080096: RNCC: 3 | RNVC: 2

5 Sep 1986

5340-12-351-8797
Permanent Magnet

123518797
5556764: RNCC: 3 | RNVC: 2

6 Sep 2000

5340-12-372-4376
Rim Lock

123724376
DL 1 R X45.10: RNCC: 3 | RNVC: 2

17 Jul 2007

5340-12-333-6850
Bridge Clamp

123336850
G.BK01.2000.08: RNCC: 3 | RNVC: 2
12G.BK01.2000.08: RNCC: 5 | RNVC: 2

26 Jan 1994

5340-12-331-1612
Access Cover

123311612
28.4.001.0003: RNCC: 3 | RNVC: 2

26 Mar 1993

5340-12-357-9185
Mounting Bracket

123579185
2300387-413003.000: RNCC: 2 | RNVC: 2
2300387-413003.000: RNCC: 3 | RNVC: 2

14 Aug 2002

5340-12-371-6242
Dust And Moisture Seal Protective Cap

123716242
2136172: RNCC: 3 | RNVC: 2
7KK316: RNCC: 5 | RNVC: 2

26 Apr 2007

5340-12-323-9574
Handle Grip

123239574
4019020059: RNCC: 3 | RNVC: 2

11 Jan 1991

5340-12-373-8722
Dust And Moisture Seal Protective Cap

123738722
4405500037: RNCC: 3 | RNVC: 2

14 Dec 2007

5340-12-198-3012
Rod End Clevis

121983012
27 0322 340: RNCC: 2 | RNVC: 2
9837760: RNCC: 3 | RNVC: 2
9837760: RNCC: 5 | RNVC: 9

13 Jan 1984

5340-12-360-3722
Dust And Moisture Seal Protective Cap

123603722
0009620125: RNCC: 3 | RNVC: 2
0009620125: RNCC: 5 | RNVC: 2

14 May 2003

5340-12-356-2571
Dust And Moisture Seal Protective Cap-Plug

123562571
53690: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-12-171-1485
Spring Tension Clip

121711485
66-3506-042-01: RNCC: 3 | RNVC: 2

12 Sep 1977

5340-12-335-3443
Mending Plate

123353443
6700018-201411.01: RNCC: 2 | RNVC: 2
6700018-201411.01: RNCC: 3 | RNVC: 2

11 Aug 1994

5340-12-375-4092
Section Block Clamp

123754092
160-88181-01: RNCC: 3 | RNVC: 2
15160-88181-01: RNCC: 5 | RNVC: 2

29 May 2008

5340-12-123-3236
Resilient Mount

121233236
845-E5546-44-05-NR65.ST: RNCC: 3 | RNVC: 2
03442121: RNCC: 3 | RNVC: 2
3442121KZ5546-44: RNCC: 5 | RNVC: 2
5546-44-05: RNCC: 5 | RNVC: 2
E5546-44-05: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-370-9029
Loop Clamp

123709029
81974200152: RNCC: 3 | RNVC: 2
81.97420-0152: RNCC: 5 | RNVC: 2
81.97420.0152: RNCC: 5 | RNVC: 2

15 Jan 2007

5340-12-318-3212
Double Angle Bracket

123183212
2300137-060200.002: RNCC: 2 | RNVC: 2
2300137-060200.002: RNCC: 3 | RNVC: 2
2300137-060200.002: RNCC: 5 | RNVC: 9
9861131: RNCC: 5 | RNVC: 9

30 Jun 1989

5340-12-342-7469
Runner

123427469
288144477: RNCC: 3 | RNVC: 2
2881444: RNCC: 5 | RNVC: 2
3230-632.01.01.025-000: RNCC: 5 | RNVC: 2

24 Mar 1997

5340-12-184-3676
Bail Handle

121843676
273-11: RNCC: 3 | RNVC: 2
56-0049-106-00: RNCC: 5 | RNVC: 2
56.0049.106.00: RNCC: 5 | RNVC: 2

22 Jul 1980

5340-12-393-2872
Swivel Caster

123932872
L-POEV 160R-ST: RNCC: 3 | RNVC: 2
50807: RNCC: 5 | RNVC: 2
91943214: RNCC: 5 | RNVC: 2

4 Sep 2013

5340-12-317-5042
Retaining Strap

123175042
5057 52 3: RNCC: 3 | RNVC: 9

13 Apr 1989

5340-12-362-3144
Metallic Bumper

123623144
1600-201110.007.0: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-12-390-7488
Case Leg

123907488
4.006-558.0: RNCC: 3 | RNVC: 2

7 Dec 2012

5340-12-351-2236
Friction Catch

123512236
9112.987.4: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-12-359-6837
Angle Bracket

123596837
2500261-820000.011.0: RNCC: 2 | RNVC: 2
2500261-820000.011.0: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-12-173-8552
Section Block Clamp

121738552
PAN4271-6: RNCC: 3 | RNVC: 2

17 May 1978

5340-12-352-4955
Mending Plate

123524955
521910-820000.002.0: RNCC: 2 | RNVC: 2
521910-820000.002.0: RNCC: 3 | RNVC: 2
1520004: RNCC: 5 | RNVC: 2
22013.0.11.053.00: RNCC: 5 | RNVC: 9

22 Nov 2000

5340-12-321-7661
Dust And Moisture Seal Protective Plug

123217661
700M30X2: RNCC: 3 | RNVC: 2
779008377: RNCC: 5 | RNVC: 2
461300R: RNCC: 5 | RNVC: 2
700M30X200: RNCC: 5 | RNVC: 2
GPN700,M30X2 FORM A: RNCC: 5 | RNVC: 9

25 Jun 1990

5340-12-359-9671
Angle Bracket

123599671
2500261-280400.005.0: RNCC: 2 | RNVC: 2
2500261-280400.005.0: RNCC: 3 | RNVC: 2

25 Mar 2003

5340-12-175-8639
Loop Clamp

121758639
032-0030-014-020: RNCC: 3 | RNVC: 2
032 000 001 018: RNCC: 3 | RNVC: 2
0320030014020: RNCC: 5 | RNVC: 2
50155105: RNCC: 5 | RNVC: 2
0009953244: RNCC: 5 | RNVC: 2
032000001018: RNCC: 5 | RNVC: 2
0009953244: RNCC: 5 | RNVC: 2

23 Oct 1978

5340-12-339-5381
Mounting Bracket

123395381
5-5610-054670: RNCC: 3 | RNVC: 2
1-3500-7019/31 IT2.14: RNCC: 5 | RNVC: 2

4 Dec 1995

5340-12-191-0584
Electrical-Mechanical Equipment Post

121910584
VG96924T20A2: RNCC: 2 | RNVC: 2
VG96924T20A2: RNCC: 3 | RNVC: 2
VG96924T20A2: RNCC: 5 | RNVC: 2
VG96924T20A2: RNCC: 5 | RNVC: 2
5801314-1160.004: RNCC: 5 | RNVC: 9
5801314-1160.004: RNCC: 5 | RNVC: 9
5801314-1160.004: RNCC: 5 | RNVC: 9
VG96924T20A2: RNCC: 5 | RNVC: 9

11 Jan 1982

5340-12-701-7456
Retaining Strap

127017456
VG95211-ML-127017456: RNCC: 2 | RNVC: 2
5.12.7614.8250.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-359-7294
Mounting Bracket

123597294
159593HFOE3/4-1D: RNCC: 3 | RNVC: 2
12979HFOE3/4-1D: RNCC: 5 | RNVC: 9

5 Mar 2003

5340-12-309-9316
Access Door

123099316
1865-010210.00.0: RNCC: 3 | RNVC: 9

19 Mar 1987

5340-12-321-1323
Cushioning Pad

123211323
SKK 1053: RNCC: 3 | RNVC: 9

30 Mar 1990

5340-12-313-3263
Lock-Release Lever

123133263
51938: RNCC: 3 | RNVC: 2

22 Mar 1988

5340-12-122-4115
Plain Solid Disk

121224115
3153570852: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-196-2124
Plug Button

121962124
8950712314: RNCC: 3 | RNVC: 2
0691025: RNCC: 5 | RNVC: 2
691025: RNCC: 5 | RNVC: 9

13 Jun 1983

5340-12-318-3217
Dust And Moisture Seal Protective Cap

123183217
2300137-260403.000: RNCC: 2 | RNVC: 2
2300137-260403.000: RNCC: 3 | RNVC: 2
9822092: RNCC: 5 | RNVC: 9
2300137-260403.000: RNCC: 5 | RNVC: 9

30 Jun 1989

5340-12-361-5442
Lock-Release Lever

123615442
230.1025: RNCC: 3 | RNVC: 2
230.1025.001: RNCC: 5 | RNVC: 2

16 Oct 2003

5340-12-357-8162
Angle Bracket

123578162
2300388-250740.007: RNCC: 2 | RNVC: 2
9943714: RNCC: 3 | RNVC: 2
2300388-250740.007: RNCC: 5 | RNVC: 2

29 Jul 2002

5340-12-358-8756
Catch Strike

123588756
239.41.013: RNCC: 3 | RNVC: 2

25 Nov 2002

5340-12-394-0655
Spacing Threaded Standoff

123940655
L291M0022101: RNCC: 3 | RNVC: 2

4 Nov 2013

5340-12-317-6991
Retaining Band

123176991
3524700040: RNCC: 3 | RNVC: 2

2 May 1989

5340-12-317-8063
Detent Plunger

123178063
02980242: RNCC: 3 | RNVC: 2
1249301094: RNCC: 5 | RNVC: 2

16 May 1989

5340-12-177-2112
Loop Clamp

121772112
3609950501: RNCC: 3 | RNVC: 2

19 Jan 1979

5340-12-159-8028
Loop Clamp

121598028
750S: RNCC: 3 | RNVC: 2
ZT0750S: RNCC: 5 | RNVC: 2
ZT750S: RNCC: 5 | RNVC: 2
12H4110: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-122-2818
Retaining Strap

121222818
3049950132: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-050-2518

5340-12-041-0480

5340-12-126-5185

5340-12-702-6309
Mounting Bracket

127026309
VG95211-ML-127026309: RNCC: 2 | RNVC: 2
83.7206.50: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-349-7497
Angle Bracket

123497497
FAST-202110.01: RNCC: 2 | RNVC: 2
FAST-202110.01: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-12-378-6571
Mounting Bracket

123786571
3421-40500 R: RNCC: 3 | RNVC: 2

29 Apr 2009

5340-12-347-0059
Nonmetallic Bumper

123470059
78203 43506: RNCC: 2 | RNVC: 2
7820343506: RNCC: 3 | RNVC: 2
78203 43506: RNCC: 5 | RNVC: 9

12 Oct 1998

5340-12-389-3774
Mounting Bracket

123893774
98231: RNCC: 3 | RNVC: 2

28 Jun 2012

5340-12-354-0873
Dust And Moisture Seal Protective Cap Set

123540873
303791-8066: RNCC: 3 | RNVC: 2

1 Jun 2001

5340-12-305-0673
Angle Bracket

123050673
0224 3942: RNCC: 3 | RNVC: 2
02243942ED0148-48: RNCC: 5 | RNVC: 2

24 Sep 1985

5340-12-320-6948
Access Cover

123206948
430952: RNCC: 3 | RNVC: 2
430952: RNCC: 5 | RNVC: 2
3331: RNCC: 5 | RNVC: 9
430952: RNCC: 5 | RNVC: 9

8 Feb 1990

5340-12-173-7499
Rod End Clevis

121737499
TLF381: RNCC: 3 | RNVC: 2

8 May 1978

5340-12-172-6157
Dust And Moisture Seal Protective Cap

121726157
021129753: RNCC: 3 | RNVC: 2

31 Jan 1978

5340-12-385-9720
Double Angle Bracket

123859720
867002204: RNCC: 3 | RNVC: 2

26 Jul 2011

5340-12-371-7982
Angle Bracket

123717982
4120321046: RNCC: 3 | RNVC: 2
7381476: RNCC: 5 | RNVC: 2

16 May 2007

5340-12-390-0270
Angle Bracket

123900270
313609: RNCC: 3 | RNVC: 2

26 Sep 2012

5340-12-010-3063

5340-12-315-4748
Catch Strike

123154748
6041: RNCC: 3 | RNVC: 2
6.030.028: RNCC: 5 | RNVC: 2
6030028: RNCC: 5 | RNVC: 2

26 Oct 1988

5340-12-369-0518
Dust And Moisture Seal Protective Plug

123690518
1X53 174 720.5: RNCC: 3 | RNVC: 2

17 May 2006

5340-12-338-4091
Protection Bellows

123384091
N.1.480.18 R1: RNCC: 3 | RNVC: 2
201 00 126: RNCC: 5 | RNVC: 2
201 00 126: RNCC: 5 | RNVC: 2
20100126: RNCC: 5 | RNVC: 2

4 Jul 1995

5340-12-130-1127

5340-12-352-4308
Strap Hinge

123524308
13521801: RNCC: 3 | RNVC: 2

20 Nov 2000

5340-12-393-0066
Mounting Bracket

123930066
L533M2011201: RNCC: 3 | RNVC: 2

30 Jul 2013

5340-12-198-7297
Nonmetallic Bumper

121987297
1000078-100120.01: RNCC: 2 | RNVC: 2
1000078-100120.01: RNCC: 3 | RNVC: 2
1000078-100120.01: RNCC: 5 | RNVC: 9

22 Feb 1984

5340-12-700-3039
Nonmetallic Bumper

127003039
51-200842004: RNCC: 2 | RNVC: 2
2A28/6-6: RNCC: 3 | RNVC: 2
2A28-6-6: RNCC: 5 | RNVC: 9

6 Dec 1991

5340-12-195-3615
Resilient Mount

121953615
DIN95369-A1-1-M8-M-AL: RNCC: 2 | RNVC: 2
151001-M8-HD.AL-40: RNCC: 5 | RNVC: 2
60-100-040 HD-L-M8: RNCC: 5 | RNVC: 2
C1010 HDSL M8: RNCC: 5 | RNVC: 2
2622 890 11011: RNCC: 5 | RNVC: 2
VG95369-A1-1-M8-MVQ-H-AL: RNCC: 5 | RNVC: 9
C1010HDSLM8: RNCC: 5 | RNVC: 9

15 Feb 1983

5340-12-363-3167
Lock-Release Lever

123633167
09030009914: RNCC: 3 | RNVC: 2
9030009914: RNCC: 5 | RNVC: 2

26 May 2004

5340-12-157-7333
Retaining Strap

121577333
VG95933CR-12-W1-BK: RNCC: 2 | RNVC: 2
2/1D12MMN325: RNCC: 3 | RNVC: 2
MMN325-2-1D12: RNCC: 5 | RNVC: 2
MMN325-2-1D12: RNCC: 5 | RNVC: 2
2-1D12MMN325: RNCC: 5 | RNVC: 2
700325 012104: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-361-0796
Mounting Bracket

123610796
0854 2991.003: RNCC: 3 | RNVC: 2

19 Aug 2003

5340-12-337-7846
Retaining Strap

123377846
14 701: RNCC: 3 | RNVC: 2
2019950265: RNCC: 5 | RNVC: 2

11 Apr 1995

5340-12-185-1156
Clamping Catch

121851156
PAN5113D: RNCC: 3 | RNVC: 2

11 Sep 1980

5340-12-364-2619
Mounting Bracket

123642619
4375040339: RNCC: 3 | RNVC: 2

4 Sep 2004

5340-12-363-1196
Mounting Bracket

123631196
9251303000: RNCC: 3 | RNVC: 2

5 May 2004

5340-12-363-9991
Spannversch Halter

123639991
GSERD2010.05.02.03: RNCC: 3 | RNVC: 2

11 Aug 2004

5340-12-303-9919
Bow Handle

123039919
8450050004: RNCC: 3 | RNVC: 2
84500 50004: RNCC: 5 | RNVC: 9

29 May 1985

5340-12-306-0040
Manual Control Handle

123060040
374.016: RNCC: 3 | RNVC: 2

20 Jan 1986

5340-12-304-2785
Dust And Moisture Seal Protective Cap

123042785
81964100412: RNCC: 3 | RNVC: 2
4A77381: RNCC: 5 | RNVC: 2

5 Jul 1985

5340-12-365-5165
Webbing Strap

123655165
1049075-7441: RNCC: 3 | RNVC: 2

11 Jan 2005

5340-12-198-0972
Handwheel

121980972
1200096-133200080: RNCC: 2 | RNVC: 2

20 Dec 1983

5340-12-172-9029
Electrical-Mechanical Equipment Post

121729029
021905267: RNCC: 3 | RNVC: 2
WQ885196: RNCC: 5 | RNVC: 2

2 Mar 1978

5340-12-379-7330
Dust And Moisture Seal Protective Cap-Plug

123797330
B502675: RNCC: 3 | RNVC: 2

27 Aug 2009

5340-12-302-7913
Mending Plate

123027913
178.E54.80: RNCC: 3 | RNVC: 2

30 Jan 1985

5340-12-094-6276

5340-12-317-3197
Double Angle Bracket

123173197
4900064-4121.006: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-193-9648
Dust And Moisture Seal Protective Cap

121939648
W41256-U6001-B11: RNCC: 3 | RNVC: 2
MS3181-10C,OHNEKETTE: RNCC: 5 | RNVC: 2
MS3181-10C, OHNE KETTE: RNCC: 5 | RNVC: 9

20 Sep 1982

5340-12-324-8433
Kunst Gleitschiene

123248433
6600133-331110.008: RNCC: 2 | RNVC: 2
002 528 800-116: RNCC: 3 | RNVC: 2

26 Mar 1991

5340-12-371-9791
Spacing Threaded Standoff

123719791
ED88-0700-30202-119: RNCC: 2 | RNVC: 2
ED88-0700-30202-119: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-12-388-7678
Mending Plate

123887678
601252-201600.03: RNCC: 2 | RNVC: 2
601252-201600.03: RNCC: 3 | RNVC: 2

20 Apr 2012

5340-12-306-3379
Mending Plate

123063379
5801984-984200.001.0: RNCC: 2 | RNVC: 2
5801984-984200.001.0: RNCC: 3 | RNVC: 2

20 Feb 1986

5340-12-162-3820
Butt Hinge

121623820
4-71351: RNCC: 3 | RNVC: 2
268841: RNCC: 5 | RNVC: 2
4-71351: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-327-6572
Resilient Mount

123276572
E1H 42-12 EC: RNCC: 3 | RNVC: 2
E1H42-12EC: RNCC: 5 | RNVC: 2

14 Feb 1992

5340-12-165-6860
Angle Bracket

121656860
295-213: RNCC: 3 | RNVC: 2
1065-1500-0101: RNCC: 5 | RNVC: 2

22 Jun 1976

5340-12-325-1421
Resilient Mount

123251421
V1H 5025-02: RNCC: 3 | RNVC: 2
VIH 5025-02: RNCC: 5 | RNVC: 2
VIH5025-02: RNCC: 5 | RNVC: 2

7 May 1991

5340-12-379-9373
Hand Crank

123799373
MARSZNR12200/7290-05: RNCC: 3 | RNVC: 2

14 Sep 2009

5340-12-371-8062
Mounting Plate

123718062
51-1599-400-05: RNCC: 3 | RNVC: 2

18 May 2007

5340-12-350-4462
Flush Catch

123504462
JN0218-1: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-306-4018
Mending Plate

123064018
V22.917.31-6: RNCC: 3 | RNVC: 2

26 Feb 1986

5340-12-330-9263
Helical Compression Spring Seat

123309263
2782-360100.005.0: RNCC: 2 | RNVC: 2
2782-360100.005.0: RNCC: 3 | RNVC: 2

26 Feb 1993

5340-12-369-1976
Loop Clamp

123691976
SP 319.0 PP DP AS V4A: RNCC: 3 | RNVC: 2

1 Jun 2006

5340-12-357-7589
Spring Tension Clip

123577589
0009933007: RNCC: 3 | RNVC: 2

19 Jul 2002

5340-12-044-3475

5340-12-026-7714

5340-12-701-5300
Mechanical Stop

127015300
5.12.6105.0423.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-383-0096
Spring Loaded Cylinder Fastener

123830096
508100.8.1200.4: RNCC: 3 | RNVC: 2
29000611: RNCC: 5 | RNVC: 2

2 Sep 2010

5340-12-382-6923
Access Cover

123826923
120D050400.006.0: RNCC: 2 | RNVC: 2
120D050400.006.0: RNCC: 3 | RNVC: 2

26 Jul 2010

5340-12-366-6262
Access Hole Frame

123666262
2 0065-841: RNCC: 3 | RNVC: 2
2 0065-841: RNCC: 5 | RNVC: 2

17 May 2005

5340-12-338-7643
Lock-Release Lever

123387643
D00001157041: RNCC: 3 | RNVC: 2
D 0000 1157 041: RNCC: 5 | RNVC: 2

23 Aug 1995

5340-12-337-8248
Mounting Plate

123378248
461 540 01 73: RNCC: 3 | RNVC: 2
S 721 1 85 616 2: RNCC: 3 | RNVC: 9
4615400173: RNCC: 5 | RNVC: 2

19 Apr 1995

5340-12-325-7996
Nonmetallic Bumper

123257996
5801984-981313.006.0: RNCC: 2 | RNVC: 2
PLATTE170X30X5MM.MOOSGUMMI 60SHA: RNCC: 3 | RNVC: 2
5801984-981313.006.0: RNCC: 5 | RNVC: 2

11 Jul 1991

5340-12-354-0080
Access Cover

123540080
1852-231050.000.0: RNCC: 3 | RNVC: 2

28 May 2001

5340-12-165-9780
Rod End Clevis

121659780
100429-50000-10-0: RNCC: 2 | RNVC: 2
100429-50000-10-0: RNCC: 5 | RNVC: 2

24 Jul 1976

5340-12-703-2065
Mounting Plate

127032065
VG95211-ML-127032065: RNCC: 2 | RNVC: 2
5.12.5313.2990.05: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-12-392-6612
Loop Clamp

123926612
DIN3016-1-D1-12X20-W1-2-EPDM: RNCC: 2 | RNVC: 2

26 Jun 2013

5340-12-199-0557
Angle Bracket

121990557
5801433-070251.01.0: RNCC: 3 | RNVC: 2
5801433-070251-01-0: RNCC: 5 | RNVC: 2

22 Mar 1984

5340-12-393-2543
Safety Cable Kit

123932543
D0110590-001: RNCC: 3 | RNVC: 2

21 Aug 2013

5340-12-334-8514
Access Cover

123348514
C230ZZ2A001-000: RNCC: 3 | RNVC: 2

28 Jun 1994

5340-12-378-6169
Padlock

123786169
DIN7465-E4-40-BK: RNCC: 2 | RNVC: 2

27 Apr 2009

5340-12-377-7151
Webbing Strap

123777151
4100036-150797.000: RNCC: 2 | RNVC: 2
4100036-150797.000: RNCC: 3 | RNVC: 2

5 Feb 2009

5340-12-365-5884
Double Angle Bracket

123655884
J32320058-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-136-1691
Retaining Strap

121361691
81974010057: RNCC: 3 | RNVC: 2
R5807: RNCC: 5 | RNVC: 2
00.00430-5807: RNCC: 5 | RNVC: 2
00004305807: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-375-0025
Support Hook

123750025
453 7872-002: RNCC: 3 | RNVC: 2
453 7872-002: RNCC: 5 | RNVC: 2

11 Apr 2008

5340-12-703-0573
Retaining Strap

127030573
VG95211-ML-127030573: RNCC: 2 | RNVC: 2
1666S50-32N: RNCC: 3 | RNVC: 2
0500812915729: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-380-4724
Lock Bolt

123804724
12-01-010-06-01: RNCC: 3 | RNVC: 2

2 Nov 2009

5340-12-177-1363
Angle Bracket

121771363
5800822-1201-005: RNCC: 3 | RNVC: 2
5800822-1201.005: RNCC: 5 | RNVC: 2

17 Jan 1979

5340-12-185-3268
Mending Plate

121853268
2660625: RNCC: 3 | RNVC: 2
2660-625: RNCC: 5 | RNVC: 2

30 Sep 1980

5340-12-167-2857
Catch Strike

121672857
66-3523-300-02A001: RNCC: 3 | RNVC: 2

8 Dec 1976

5340-12-391-8649
Angle Bracket

123918649
5070000-030000.002.0: RNCC: 3 | RNVC: 2

15 Apr 2013

5340-12-406-4451
Manual Contro Lever

5340-12-323-4083
Mounting Bracket

123234083
6030160238: RNCC: 3 | RNVC: 2

23 Nov 1990

5340-12-318-5840
Door Holder

123185840
4357407416: RNCC: 3 | RNVC: 2

31 Jul 1989

5340-12-301-2412
Double Angle Bracket

123012412
4179251: RNCC: 3 | RNVC: 2

29 Sep 1984

5340-12-701-1113
Mounting Plate

127011113
VG95211-ML-127011113: RNCC: 2 | RNVC: 2
4.15.9101.7703.98: RNCC: 3 | RNVC: 2
SKZ-9101-7703: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-335-5899
Mounting Plate

123355899
704-122120-000-0: RNCC: 3 | RNVC: 2

2 Sep 1994

5340-12-386-5072
Support Hook

123865072
120D187110.002.0: RNCC: 2 | RNVC: 2
120D187110.002.0: RNCC: 3 | RNVC: 2
1328295: RNCC: 5 | RNVC: 2

7 Sep 2011

5340-12-199-7194
Double Angle Bracket

121997194
43712581-301: RNCC: 2 | RNVC: 2
43712581-301: RNCC: 3 | RNVC: 2

25 May 1984

5340-12-374-6577
Angle Bracket

123746577
J92226419-001: RNCC: 3 | RNVC: 2

5 Mar 2008

5340-12-701-1684
Mounting Bracket

127011684
VG95211-ML-127011684: RNCC: 2 | RNVC: 2
5.12.0237.1650.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-4231
Angle Bracket

127024231
VG95211-ML-127024231: RNCC: 2 | RNVC: 2
5.12.7206.1694.02: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-175-7007
Catch Strike

121757007
CF453224A: RNCC: 3 | RNVC: 2
CF 453 224 A: RNCC: 5 | RNVC: 2
CF 453 224 A: RNCC: 5 | RNVC: 2
CF453224A: RNCC: 5 | RNVC: 2
CF 453 224 A: RNCC: 5 | RNVC: 2
CF453224A: RNCC: 5 | RNVC: 2

11 Oct 1978

5340-12-092-2655

5340-12-360-6676
Cushioning Pad

123606676
0009648406: RNCC: 3 | RNVC: 2
0009648406: RNCC: 5 | RNVC: 2

25 Jun 2003

5340-12-319-4800
Retaining Strap

123194800
327443: RNCC: 3 | RNVC: 2

5 Oct 1989

5340-12-360-2035
Mounting Bracket

123602035
300.034.199: RNCC: 3 | RNVC: 2

17 Apr 2003

5340-12-022-7087

5340-12-173-4747
Retaining Strap

121734747
861253269: RNCC: 3 | RNVC: 9

18 Apr 1978

5340-12-183-1436
Rod End Clevis

121831436
2301601: RNCC: 3 | RNVC: 2

20 Mar 1980

5340-12-701-5779
Mounting Plate

127015779
5.12.6405.0120.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-193-9385
Support Hook

121939385
160-246006.04: RNCC: 3 | RNVC: 2
160-246006-04: RNCC: 5 | RNVC: 2
160-246006.04: RNCC: 5 | RNVC: 9

15 Sep 1982

5340-12-323-7361
Loop Clamp

123237361
2.192: RNCC: 3 | RNVC: 2
K52RU: RNCC: 5 | RNVC: 2
2-192: RNCC: 5 | RNVC: 2

12 Dec 1990

5340-12-159-7041
Leather Strap

121597041
4047902196: RNCC: 3 | RNVC: 2
704041074300: RNCC: 5 | RNVC: 2
70-4041-0743-00: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-339-5279
Plug Button

123395279
81964100353: RNCC: 3 | RNVC: 2
81.96410.0353: RNCC: 5 | RNVC: 2

30 Nov 1995

5340-12-349-4492
Rod End Clevis

123494492
T521M0501211: RNCC: 3 | RNVC: 2

17 Nov 1999

5340-12-312-7523
Angle Bracket

123127523
2143515378: RNCC: 3 | RNVC: 2

2 Feb 1988

5340-12-305-8099
Extension Drawer Slide Section

123058099
BD9101Z027: RNCC: 3 | RNVC: 2
BD9101Z027: RNCC: 5 | RNVC: 9

17 Dec 1985

5340-12-145-8199
Butt Hinge Leaf

121458199
1191: RNCC: 3 | RNVC: 9
1191: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-385-9271
Track Stop

123859271
110185-11: RNCC: 3 | RNVC: 2
S252M32T1001: RNCC: 5 | RNVC: 2

21 Jul 2011

5340-12-701-6217
Angle Bracket

127016217
VG95211-ML-127016217: RNCC: 2 | RNVC: 2
5.12.7020.1470.17: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-355-1785
Mounting Bracket

123551785
VG95211-ML-123551785: RNCC: 2 | RNVC: 2
5.12.0246.0460.91: RNCC: 3 | RNVC: 2

18 Oct 2001

5340-12-701-7998
Mounting Plate

127017998
VG95211-ML-127017998: RNCC: 2 | RNVC: 2
5.12.8102.6090.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-164-7076
Nut And Bolt Locking Plate

121647076
681-00100-09: RNCC: 3 | RNVC: 2
681-00100-09: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-1998
Mounting Bracket

127021998
VG95211-ML-127021998: RNCC: 2 | RNVC: 2
30.7210.573: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-350-2216
Nonmetallic Bumper

123502216
10063-100000.04: RNCC: 3 | RNVC: 2
10063-100000.04: RNCC: 5 | RNVC: 9

29 Feb 2000

5340-12-702-1887
Retaining Strap

127021887
VG95211-ML-127021887: RNCC: 2 | RNVC: 2
30.7208.130: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-353-1485
Mounting Plate

123531485
711 E08 013/1: RNCC: 3 | RNVC: 2

2 Feb 2001

5340-12-196-5523
Angle Bracket

121965523
C22136-A1000-C144: RNCC: 3 | RNVC: 2
C22136A1000C144: RNCC: 5 | RNVC: 2

18 Jul 1983

5340-12-165-7849
Dust And Moisture Seal Protective Plug

121657849
1172019EE8975-65: RNCC: 3 | RNVC: 2
0117 2019: RNCC: 5 | RNVC: 2
5H18-5X22-5X21H7565: RNCC: 5 | RNVC: 2
1172019: RNCC: 5 | RNVC: 9

26 Jun 1976

5340-12-312-5904
Ball Socket Seat

123125904
615.06-04-01-04-003: RNCC: 3 | RNVC: 2

20 Jan 1988

5340-12-177-1204
Access Cover

121771204
81657120006: RNCC: 3 | RNVC: 2
81.65712-0006: RNCC: 5 | RNVC: 2
05012315001: RNCC: 5 | RNVC: 2
E05012315001: RNCC: 5 | RNVC: 2

17 Jan 1979

5340-12-164-6034
Casement Fastener

121646034
681-22230: RNCC: 3 | RNVC: 2
681-22230: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-198-5339
Angle Bracket

121985339
23111-6156.00: RNCC: 2 | RNVC: 2
9849938: RNCC: 3 | RNVC: 2
23111-6156.00: RNCC: 5 | RNVC: 9
9849938: RNCC: 5 | RNVC: 9
23111-6156.00: RNCC: 5 | RNVC: 9

7 Feb 1984

5340-12-198-1908
Helical Compression Spring Retainer

121981908
1420328001: RNCC: 3 | RNVC: 2
1420328001: RNCC: 5 | RNVC: 2
VDPM00699: RNCC: 5 | RNVC: 2

28 Dec 1983

5340-12-304-6439
Angle Bracket

123046439
5801841-720.000: RNCC: 2 | RNVC: 2
7800141020: RNCC: 3 | RNVC: 2
5801841-720.000: RNCC: 5 | RNVC: 9
78001 41020: RNCC: 5 | RNVC: 9

8 Aug 1985

5340-12-386-7498
Dust And Moisture Seal Protective Plug

123867498
05570060: RNCC: 3 | RNVC: 2
CV190446: RNCC: 5 | RNVC: 2
05570060: RNCC: 5 | RNVC: 2

28 Sep 2011

5340-12-389-8687
Access Cover

123898687
4636800023: RNCC: 3 | RNVC: 2

6 Sep 2012

5340-12-358-7727
Multiple Angle Bracket

123587727
3813177840: RNCC: 3 | RNVC: 2

13 Nov 2002

5340-12-028-5992

5340-12-331-0729
Helical Compression Spring Retainer

123310729
6380495: RNCC: 3 | RNVC: 2

18 Mar 1993

5340-12-179-8572
Retaining Strap

121798572
24114: RNCC: 3 | RNVC: 2

3 Aug 1979

5340-12-195-6428
Loop Clamp

121956428
PAN4231CGF5626: RNCC: 3 | RNVC: 2

22 Mar 1983

5340-12-361-7727
Mounting Bracket

123617727
2653-971510.000.0: RNCC: 2 | RNVC: 2
2653-971510.000.0: RNCC: 3 | RNVC: 2

17 Nov 2003

5340-12-190-2191
Loop Clamp

121902191
TO VD 200: RNCC: 3 | RNVC: 2
T0VD200: RNCC: 5 | RNVC: 2
TOVD 200: RNCC: 5 | RNVC: 2
2.72-31846 ITEM 6204: RNCC: 5 | RNVC: 2

12 Nov 1981

5340-12-043-2688

5340-12-165-7150
Helical Compression Spring Seat

121657150
2143296EE0148-08: RNCC: 3 | RNVC: 2
0147-08E2410947: RNCC: 5 | RNVC: 2
0214 3296: RNCC: 5 | RNVC: 2
2143296: RNCC: 5 | RNVC: 9

22 Jun 1976

5340-12-384-9928
Rod End Clevis

123849928
F1.1289-37-10-00.00-12: RNCC: 3 | RNVC: 2

18 Apr 2011

5340-12-361-5533
Mounting Bracket

123615533
8854 108-112: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-12-394-3827
Dust And Moisture Seal Protective Cover

123943827
062622: RNCC: 3 | RNVC: 2

27 Nov 2013

5340-12-199-1793
Nonmetallic Bumper

121991793
321711208: RNCC: 3 | RNVC: 2

3 Apr 1984

5340-12-374-2523
Access Cover

123742523
L533M1247103: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-326-2086
Loop Clamp

123262086
3965280043: RNCC: 3 | RNVC: 2

16 Aug 1991

5340-12-381-4903
Retaining Strap

123814903
88156400005: RNCC: 3 | RNVC: 2

23 Feb 2010

5340-12-372-6989
Dust And Moisture Seal Protective Cap

123726989
D4075721: RNCC: 3 | RNVC: 2

14 Aug 2007

5340-12-328-9128
Loop Clamp

123289128
LB1 6PA: RNCC: 3 | RNVC: 2
5L.3821.005.36: RNCC: 5 | RNVC: 2
LBG106UL: RNCC: 5 | RNVC: 2
LB1 6PA: RNCC: 5 | RNVC: 2

1 Jul 1992

5340-12-183-0747
Loop Clamp

121830747
0287 3729: RNCC: 3 | RNVC: 2
2873729: RNCC: 5 | RNVC: 2
2873729KZ0693-45: RNCC: 5 | RNVC: 2

18 Mar 1980

5340-12-385-4794
Mounting Bracket

123854794
23540754: RNCC: 3 | RNVC: 2

8 Jun 2011

5340-12-375-8451
Bow Handle

123758451
4637430172: RNCC: 3 | RNVC: 2

10 Jul 2008

5340-12-337-9787
Mounting Bracket

123379787
4626801: RNCC: 3 | RNVC: 2

8 May 1995

5340-12-370-9984
Manual Control Handle

123709984
BGAG006: RNCC: 3 | RNVC: 2

24 Jan 2007

5340-12-344-6424

5340-12-360-2113
Angle Bracket

123602113
81251402122: RNCC: 3 | RNVC: 2

17 Apr 2003

5340-12-329-5070
Angle Bracket

123295070
2500229-194800.000.0: RNCC: 2 | RNVC: 2
2500229-194800.000.0: RNCC: 3 | RNVC: 2

26 Aug 1992

5340-12-320-5997
Resilient Mount

123205997
0118046-11MN60: RNCC: 3 | RNVC: 2
011804615: RNCC: 5 | RNVC: 2

30 Jan 1990

5340-12-389-1448
Mounting Bracket

123891448
5652-250200A00C: RNCC: 2 | RNVC: 2
5652-250200A00C: RNCC: 3 | RNVC: 2

30 May 2012

5340-12-359-6105
Mounting Bracket

123596105
2500294-054: RNCC: 3 | RNVC: 2

20 Feb 2003

5340-12-304-7938
Pipe Bracket

123047938
DIN87371-22: RNCC: 2 | RNVC: 2
22DIN87371: RNCC: 5 | RNVC: 2

26 Aug 1985

5340-12-320-7670
Dust And Moisture Seal Protective Cap

123207670
M6NR.606GRAU: RNCC: 3 | RNVC: 2
1000/1069-GRAU: RNCC: 3 | RNVC: 2
606-GRAU: RNCC: 5 | RNVC: 2
GPN1000/1069GRAU: RNCC: 5 | RNVC: 2

14 Feb 1990

5340-12-345-2426
Helical Compression Spring Seat

123452426
07.0294: RNCC: 3 | RNVC: 2
CAE00497: RNCC: 5 | RNVC: 2

16 Feb 1998

5340-12-702-8591
Support Hook

127028591
53-04045105124: RNCC: 2 | RNVC: 2

5 Jan 1996

5340-12-321-1573
Access Cover

123211573
00-15-10-13-09: RNCC: 2 | RNVC: 2
00-15-10-13-09: RNCC: 3 | RNVC: 2

6 Apr 1990

5340-12-701-8431
Loop Clamp

127018431
VG95211-ML-127018431: RNCC: 2 | RNVC: 2
5149A-14: RNCC: 3 | RNVC: 2
0500812906689: RNCC: 5 | RNVC: 2
1666S50-14N: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-392-7460
Webbing Strap

123927460
10187-003110.001.0: RNCC: 3 | RNVC: 2

4 Jul 2013

5340-12-700-2998
Detent Plunger

127002998
51-200708024: RNCC: 2 | RNVC: 2
2A28/2-12: RNCC: 3 | RNVC: 2
2A28-2-12: RNCC: 5 | RNVC: 9

4 Dec 1991

5340-12-349-8205
Dust And Moisture Seal Protective Cap

123498205
46 54 2 316 012: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-12-316-9130
Access Cover

123169130
SP21650: RNCC: 3 | RNVC: 2
96.4.718.0004: RNCC: 5 | RNVC: 9

22 Feb 1989

5340-12-197-0530
Lock-Release Lever

121970530
6100.007.4: RNCC: 3 | RNVC: 2

14 Sep 1983

5340-12-323-0947
Pipe Bracket

123230947
1204 6961: RNCC: 3 | RNVC: 2
3.603.0.637.014.7: RNCC: 5 | RNVC: 2

23 Oct 1990

5340-12-382-6841
Lock-Release Lever

123826841
10114-200610.003.0: RNCC: 3 | RNVC: 2

26 Jul 2010

5340-12-386-3466
Mounting Bracket

123863466
DZ63460-4: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-12-329-0520
Butt Hinge Leaf

123290520
2500075-323000.05.0: RNCC: 2 | RNVC: 2
2500075-323000.05.0: RNCC: 5 | RNVC: 9

14 Jul 1992

5340-12-389-5445
Swivel Caster

123895445
L-ALTH 160K-FI: RNCC: 3 | RNVC: 2

19 Jul 2012

5340-12-196-8551
Dust And Moisture Seal Protective Cap

121968551
025-8636-012: RNCC: 3 | RNVC: 2

24 Aug 1983

5340-12-342-5195
Mounting Bracket

123425195
2300421-181041.000: RNCC: 2 | RNVC: 2
2300421-181041.000: RNCC: 3 | RNVC: 2
9915754: RNCC: 5 | RNVC: 9
2300421-181041.000: RNCC: 5 | RNVC: 9

24 Feb 1997

5340-12-172-1708
Bow Handle

121721708
5670-120: RNCC: 3 | RNVC: 2

27 Dec 1977

5340-12-391-4945
Mounting Bracket

123914945
I010842: RNCC: 3 | RNVC: 2

14 Mar 2013

5340-12-371-5826
Retaining Clip

123715826
T881M4033207: RNCC: 2 | RNVC: 2
T881M4033207: RNCC: 3 | RNVC: 2

20 Apr 2007

5340-12-384-9748
Nut And Bolt Head Protective Cap

123849748
0590008: RNCC: 3 | RNVC: 2

14 Apr 2011

5340-12-044-1567

5340-12-043-3039

5340-12-177-8889
Rod End Clevis

121778889
JJ47464: RNCC: 3 | RNVC: 2

7 Mar 1979

5340-12-319-5023
Escutcheon Plate

123195023
4900059-751550.009.0: RNCC: 3 | RNVC: 2
1227249: RNCC: 5 | RNVC: 2

6 Oct 1989

5340-12-393-5715
Angle Bracket

123935715
4100098-722020.002.0: RNCC: 2 | RNVC: 2
4100098-722020.002.0: RNCC: 3 | RNVC: 2

25 Sep 2013

5340-12-151-6967
Bow Handle

121516967
5820000: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-393-4476
Plug Button

123934476
0590230: RNCC: 3 | RNVC: 2

17 Sep 2013

5340-12-385-6753
Mechanical Stop

123856753
F1.1189-40-30-10.00-15: RNCC: 3 | RNVC: 2

29 Jun 2011

5340-12-355-7142
Metallic Solid Wheel

123557142
2125-121061B03B: RNCC: 2 | RNVC: 2
2125-121061B03B: RNCC: 3 | RNVC: 2

10 Dec 2001

5340-12-362-0711
Mounting Bracket

123620711
J21220043-005: RNCC: 3 | RNVC: 2

6 Jan 2004

5340-12-182-4507
Access Cover

121824507
4978001-126: RNCC: 2 | RNVC: 2
4978001-35: RNCC: 5 | RNVC: 9

1 Feb 1980

5340-12-321-9333
Expansion Plug

123219333
1480500152: RNCC: 3 | RNVC: 2
1480500152: RNCC: 5 | RNVC: 2
1480500152: RNCC: 5 | RNVC: 9

10 Jul 1990

5340-12-349-2080
Dust And Moisture Seal Protective Plug

123492080
1207 308 004: RNCC: 3 | RNVC: 2
12073088004: RNCC: 5 | RNVC: 2

7 Oct 1999

5340-12-330-7165
Spring Tension Clip

123307165
0477 24 460 100: RNCC: 3 | RNVC: 2
0002 4460100: RNCC: 5 | RNVC: 9
0477 24 460 100: RNCC: 5 | RNVC: 9

29 Jan 1993

5340-12-391-4828
Mounting Plate

123914828
I010155: RNCC: 3 | RNVC: 2

14 Mar 2013

5340-12-360-4774
Mounting Plate

123604774
82050122: RNCC: 3 | RNVC: 2
82050122: RNCC: 5 | RNVC: 2

23 May 2003

5340-12-356-8844
Nut And Bolt Locking Plate

123568844
09439418: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-12-378-1260
Butt Hinge

123781260
0009770551: RNCC: 3 | RNVC: 2

13 Mar 2009

5340-12-309-4068
Mending Plate

123094068
WW 304 728: RNCC: 2 | RNVC: 2
WW 304 728: RNCC: 3 | RNVC: 9

22 Jan 1987

5340-12-172-1252
Clamp Bolt Assembly

121721252
N00A0800210101A: RNCC: 3 | RNVC: 2
00008210101A: RNCC: 5 | RNVC: 2
00008210101A: RNCC: 5 | RNVC: 9
N00A0800210101A: RNCC: 5 | RNVC: 9

22 Dec 1977

5340-12-342-6957
Helical Compression Spring Seat

123426957
1000025-410000.24: RNCC: 2 | RNVC: 2
1000025-410000.24: RNCC: 3 | RNVC: 2

18 Mar 1997

5340-12-315-7234
Double Angle Bracket

123157234
4258310314: RNCC: 3 | RNVC: 2
425 831 03 14: RNCC: 5 | RNVC: 2

23 Nov 1988

5340-12-317-4348

5340-12-312-1336
Retaining Band

123121336
81.97460.5231: RNCC: 3 | RNVC: 2
81974605231: RNCC: 5 | RNVC: 2

25 Nov 1987

5340-12-316-0380
Angle Bracket

123160380
54.0026.546.00: RNCC: 3 | RNVC: 2

16 Dec 1988

5340-12-329-3319
Butt Hinge

123293319
2300248-80520.07: RNCC: 2 | RNVC: 2
2300248-80520.07: RNCC: 3 | RNVC: 2
2300248-80520.07: RNCC: 5 | RNVC: 2

6 Aug 1992

5340-12-329-2784
Electrical-Mechanical Equipment Post

123292784
2653-330200.06: RNCC: 2 | RNVC: 2
2653-330200.06: RNCC: 3 | RNVC: 2

31 Jul 1992

5340-12-183-9043
Retaining Strap

121839043
2215071: RNCC: 3 | RNVC: 2
4029: RNCC: 5 | RNVC: 2
5VC4421: RNCC: 5 | RNVC: 2

29 May 1980

5340-12-318-9327
Flare Lock Fastener

123189327
04731258: RNCC: 3 | RNVC: 2
04731258EE12-0891: RNCC: 5 | RNVC: 2

25 Aug 1989

5340-12-326-4618
Resilient Mount

123264618
0/7877/1043/0 PIECE 734: RNCC: 3 | RNVC: 2
M8-55SH.A.LSN6830110: RNCC: 3 | RNVC: 2

19 Sep 1991

5340-12-702-1175
Angle Bracket

127021175
VG95211-ML-127021175: RNCC: 2 | RNVC: 2
30.5314.510: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-702-2446
Mounting Bracket

127022446
VG95211-ML-127022446: RNCC: 2 | RNVC: 2
30.7715.60: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-305-3811
Detent Plunger

123053811
60300-001: RNCC: 3 | RNVC: 2

29 Oct 1985

5340-12-196-9845
Double Angle Bracket

121969845
4900059-323470.000.0: RNCC: 3 | RNVC: 2
4900059-323470-000-0: RNCC: 5 | RNVC: 2

7 Sep 1983

5340-12-328-3160
Mounting Plate

123283160
2350-010200.027.0: RNCC: 2 | RNVC: 2
2350-010200.027.0: RNCC: 3 | RNVC: 2

7 May 1992

5340-12-359-6759
Mounting Bracket

123596759
2500261-187911.000.0: RNCC: 2 | RNVC: 2
2500261-187911.000.0: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-12-319-5768
Mounting Bracket

123195768
4900059-751315.003.0: RNCC: 3 | RNVC: 2
1229189: RNCC: 5 | RNVC: 2

13 Oct 1989

5340-12-381-1468
Dirt And Liquid Deflector

123811468
6.961-919.0: RNCC: 3 | RNVC: 2

14 Jan 2010

5340-12-300-3448
Mending Plate

123003448
6100128-11100.011: RNCC: 2 | RNVC: 2
4110611417: RNCC: 3 | RNVC: 2

26 Jul 1984

5340-12-361-0339
Angle Bracket

123610339
J32420117-401: RNCC: 3 | RNVC: 2

12 Aug 2003

5340-12-376-9052
Mounting Bracket

123769052
300.062.332: RNCC: 3 | RNVC: 2

20 Nov 2008

5340-12-364-3896
Access Cover

123643896
204-030-814-5145: RNCC: 3 | RNVC: 2

18 Sep 2004

5340-12-184-6620
Plain Solid Disk

121846620
5801341-1012-001: RNCC: 3 | RNVC: 2
5801341-1012.001: RNCC: 5 | RNVC: 2

7 Aug 1980

5340-12-025-0487

5340-12-324-0665
Angle Bracket

123240665
272.337.729: RNCC: 3 | RNVC: 2
272.337 729: RNCC: 5 | RNVC: 9

18 Jan 1991

5340-12-024-7440

5340-12-198-8864
Double Angle Bracket

121988864
8370701040: RNCC: 3 | RNVC: 2

9 Mar 1984

5340-12-127-4357

5340-12-381-6500
Access Cover

123816500
200658: RNCC: 3 | RNVC: 2
89532803: RNCC: 5 | RNVC: 2

12 Mar 2010

5340-12-312-4740
Mounting Bracket

123124740
2300013-4531.00: RNCC: 2 | RNVC: 2
2300013-4531.00: RNCC: 3 | RNVC: 2
2300013-4531.00: RNCC: 5 | RNVC: 9
2300013-4531.00: RNCC: 5 | RNVC: 9

12 Jan 1988

5340-12-328-7017
Mending Plate

123287017
58R068-4.4: RNCC: 2 | RNVC: 2
58R068-4.4: RNCC: 3 | RNVC: 2
58R068-4-4: RNCC: 5 | RNVC: 2

17 Jun 1992

5340-12-177-2806
Dust And Moisture Seal Protective Cap

121772806
8977528914: RNCC: 3 | RNVC: 2
502603377: RNCC: 5 | RNVC: 2
81.96410-0324: RNCC: 5 | RNVC: 2
81964100324: RNCC: 5 | RNVC: 2
2490871: RNCC: 5 | RNVC: 2
0014310087: RNCC: 5 | RNVC: 2

24 Jan 1979

Load More Results