What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 12 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 12 of 178

5340-12-379-1530
Retaining Strap

123791530
DIN1597-9ZN: RNCC: 2 | RNVC: 2
DIN1597-9-ST-A3P: RNCC: 5 | RNVC: 9

29 Jun 2009

5340-12-165-7338
Mending Plate

121657338
25704-001000.23.0: RNCC: 2 | RNVC: 2
25704-001000.23.0: RNCC: 3 | RNVC: 2
25704-001000-23-0: RNCC: 5 | RNVC: 2
25704-001000-23-0: RNCC: 5 | RNVC: 9
25704-001000.23.0: RNCC: 5 | RNVC: 9

24 Jun 1976

5340-12-350-2017
Angle Bracket

123502017
943009501: RNCC: 3 | RNVC: 2

28 Feb 2000

5340-12-343-2108
Lock-Release Lever

123432108
98472613: RNCC: 3 | RNVC: 2

20 May 1997

5340-12-374-4738
Door Button

123744738
1000-28: RNCC: 3 | RNVC: 2

20 Feb 2008

5340-12-186-4395
Nonmetallic Bumper

121864395
81962100194: RNCC: 3 | RNVC: 2

30 Dec 1980

5340-12-308-9750
Mending Plate

123089750
151-45601: RNCC: 3 | RNVC: 2

3 Dec 1986

5340-12-319-5461
Access Cover

123195461
030898: RNCC: 3 | RNVC: 2

11 Oct 1989

5340-12-378-1892
Swivel Caster

123781892
663.16.920: RNCC: 3 | RNVC: 2

18 Mar 2009

5340-12-314-7189
Loop Clamp

123147189
0289 5224: RNCC: 3 | RNVC: 2
2895224: RNCC: 5 | RNVC: 2

3 Aug 1988

5340-12-322-3350
Expansion Shield

123223350
0009880625: RNCC: 3 | RNVC: 2

13 Aug 1990

5340-12-090-5345

5340-12-186-7441
Resilient Mount

121867441
5802206-027210: RNCC: 2 | RNVC: 2
535.1243: RNCC: 3 | RNVC: 2
5351243: RNCC: 5 | RNVC: 2

2 Feb 1981

5340-12-190-1182
Pad Eye

121901182
2500075-580430.001.0: RNCC: 2 | RNVC: 2
2500075-580430.001.0: RNCC: 3 | RNVC: 2
2500075-580430-001-0: RNCC: 5 | RNVC: 2
2500075-580430-001-0: RNCC: 5 | RNVC: 9
2500075-580430.001.0: RNCC: 5 | RNVC: 9

9 Nov 1981

5340-12-350-5567
Mounting Plate

123505567
1772-100100.014.0: RNCC: 3 | RNVC: 2

13 Apr 2000

5340-12-392-5996
Pipe Hanger

123925996
0543-166-018: RNCC: 3 | RNVC: 2

20 Jun 2013

5340-12-146-6109
Resilient Mount

121466109
23114-99-0813: RNCC: 2 | RNVC: 2
DIN95363-B20X20-M6X8-NR55ST: RNCC: 2 | RNVC: 2
510017-M6X8.NR55.ST: RNCC: 5 | RNVC: 2
1198990000: RNCC: 5 | RNVC: 2
VG95363-B20X20-M6X8-NR55ST: RNCC: 5 | RNVC: 9
23114-99-0813: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-186-9821
Nonmetallic Bumper

121869821
CF 491 091 A: RNCC: 2 | RNVC: 2
2000822: RNCC: 3 | RNVC: 2
39-1069-500000.13.0: RNCC: 5 | RNVC: 2
39-1069.500000.13.0: RNCC: 5 | RNVC: 2
CF 491 091 A: RNCC: 5 | RNVC: 2
CF 491 091 A: RNCC: 5 | RNVC: 2
CF 491 091 A: RNCC: 5 | RNVC: 2
39-1069-500000-13-0: RNCC: 5 | RNVC: 2
39-1069-500000.13.0: RNCC: 5 | RNVC: 2
39-1069-500000.13.0: RNCC: 5 | RNVC: 9

23 Feb 1981

5340-12-178-9289
Nonmetallic Bumper

121789289
1-213-006-3060: RNCC: 3 | RNVC: 9
0003231744: RNCC: 5 | RNVC: 2
000 323 1744: RNCC: 5 | RNVC: 2

25 May 1979

5340-12-310-6352
Nonmetallic Bumper

123106352
P-896361-003: RNCC: 3 | RNVC: 2
P896361-003: RNCC: 5 | RNVC: 2

10 Jun 1987

5340-12-309-0337
Hook Handle

123090337
351271141901: RNCC: 3 | RNVC: 2

9 Dec 1986

5340-12-357-3470
Loop Clamp

123573470
5561489: RNCC: 2 | RNVC: 2
5561489: RNCC: 3 | RNVC: 2

11 Jun 2002

5340-12-349-7828
Retaining Strap

123497828
T290M2202264: RNCC: 3 | RNVC: 2

7 Jan 2000

5340-12-300-0062
Mending Plate

123000062
5801998-663210.04: RNCC: 2 | RNVC: 2
5801998-663210.04: RNCC: 3 | RNVC: 2

21 Jun 1984

5340-12-311-2435
Dust And Moisture Seal Protective Cap

123112435
GKG38: RNCC: 3 | RNVC: 2
GKG 38: RNCC: 5 | RNVC: 2

7 Aug 1987

5340-12-371-8624
Mounting Bracket

123718624
7103844: RNCC: 3 | RNVC: 2
7094362: RNCC: 5 | RNVC: 2

23 May 2007

5340-12-092-3170

5340-12-314-2046
Metal Runner

123142046
409013604: RNCC: 3 | RNVC: 2
409.013 604: RNCC: 5 | RNVC: 2
271.783 308: RNCC: 5 | RNVC: 2

16 Jun 1988

5340-12-355-3453
Split Tubular Clip

123553453
892996: RNCC: 3 | RNVC: 2
ASC1449424: RNCC: 5 | RNVC: 9

6 Nov 2001

5340-12-360-3253
Mounting Bracket

123603253
3514324122: RNCC: 3 | RNVC: 2
3514324122: RNCC: 5 | RNVC: 2

8 May 2003

5340-12-091-8678

5340-12-344-4278
Mounting Bracket

123444278
P-566925-003: RNCC: 3 | RNVC: 2
P566925-003: RNCC: 5 | RNVC: 2

27 Oct 1997

5340-12-130-7078
Screw Hook

121307078
1547-25MMLANGSTAHLVERNICKELT: RNCC: 3 | RNVC: 2
110387: RNCC: 3 | RNVC: 2
ART4-25MMLANGSTAHLVERNICKELT: RNCC: 5 | RNVC: 2
ART4-25MMLANGSTAHLVERNICKELT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-316-4738
Case Corner

123164738
P-050752-001: RNCC: 3 | RNVC: 2
P050752-001: RNCC: 5 | RNVC: 2

19 Jan 1989

5340-12-354-3912
Nonmetallic Bumper

123543912
DIN95364-A18X7,5-NR55-ST: RNCC: 2 | RNVC: 2

6 Jul 2001

5340-12-346-6316
Access Cover

123466316
100.459: RNCC: 3 | RNVC: 2

19 Aug 1998

5340-12-310-7340
Hand Crank

123107340
BHAA010: RNCC: 3 | RNVC: 2

25 Jun 1987

5340-12-351-8427
Mounting Plate

123518427
10063-311100.01: RNCC: 3 | RNVC: 2
10063-311100.01: RNCC: 5 | RNVC: 9

1 Sep 2000

5340-12-325-1570
Nonmetallic Bumper

123251570
2300062-291080.005: RNCC: 2 | RNVC: 2
9831766: RNCC: 3 | RNVC: 2
2300062-291080.005: RNCC: 5 | RNVC: 9

8 May 1991

5340-12-379-3910
Butt Hinge

123793910
202164: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-12-011-5980

5340-12-358-9785
Lock Key

123589785
6.369-415.0: RNCC: 3 | RNVC: 9
6.369-415.0: RNCC: 5 | RNVC: 2

4 Dec 2002

5340-12-354-5966
Double Angle Bracket

123545966
5.045-094.0: RNCC: 3 | RNVC: 2

7 Aug 2001

5340-12-184-9627
Butt Hinge Leaf

121849627
F01-240146-00-0: RNCC: 3 | RNVC: 2

28 Aug 1980

5340-12-365-1657
Mounting Bracket

123651657
2500075-191150.001.0: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-12-360-0373
Bow Handle

123600373
2500261-183850.000.0: RNCC: 2 | RNVC: 2
2500261-183850.000.0: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-390-4582
Access Cover

123904582
2300559-188670.000.0: RNCC: 2 | RNVC: 2
2300559-188670.000.0: RNCC: 3 | RNVC: 2

14 Nov 2012

5340-12-701-9204
Loop Clamp

127019204
TK-3-38-12-5,5 D16AT-AN GOST 17-: RNCC: 3 | RNVC: 1

6 Feb 1995

5340-12-303-5920
Butt Hinge Leaf

123035920
704-127100-906-0: RNCC: 3 | RNVC: 2

11 Apr 1985

5340-12-316-0051
Loop Clamp

123160051
2500179-198730.000.0: RNCC: 2 | RNVC: 2
2500179-198730.000.0: RNCC: 3 | RNVC: 2

14 Dec 1988

5340-12-394-1049
Casement Fastener

123941049
SK961-181501.000.1: RNCC: 3 | RNVC: 2
83130709: RNCC: 6 | RNVC: 9

5 Nov 2013

5340-12-353-5233
Access Cover

123535233
2500238-041800.003.0: RNCC: 2 | RNVC: 2
2500238-041800.003.0: RNCC: 3 | RNVC: 2

4 Apr 2001

5340-12-172-6650
Angle Bracket

121726650
1224-209.46: RNCC: 2 | RNVC: 2
532008-0214.000: RNCC: 3 | RNVC: 2
532008-214: RNCC: 5 | RNVC: 9
532008-0214.000: RNCC: 5 | RNVC: 9
532008-214: RNCC: 5 | RNVC: 9
1224-209-46: RNCC: 5 | RNVC: 9
1224-209.46: RNCC: 5 | RNVC: 9

8 Feb 1978

5340-12-148-3730
Resilient Mount

121483730
83203201: RNCC: 3 | RNVC: 2
420-204-B-03.09: RNCC: 3 | RNVC: 2
420-204-B-03.09: RNCC: 5 | RNVC: 2
29E02-04-03-09: RNCC: 5 | RNVC: 2
420-204B03-09: RNCC: 5 | RNVC: 2
420-204B0309: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-348-7154
Loop Clamp

123487154
ST.1.16/15: RNCC: 3 | RNVC: 2

10 Aug 1999

5340-12-305-4885
Loop Clamp

123054885
DIN3016-S-KP-4-G-60,3-SANDOPRENE: RNCC: 2 | RNVC: 2
6060,3SA: RNCC: 3 | RNVC: 2
RCVG-460,3: RNCC: 3 | RNVC: 2
RCVG460,3: RNCC: 5 | RNVC: 2
6060,3SA: RNCC: 5 | RNVC: 2
RCVG460,3: RNCC: 5 | RNVC: 2
RCVG-460,3: RNCC: 5 | RNVC: 2

13 Nov 1985

5340-12-304-9622
Butt Hinge Leaf

123049622
P-296921-402: RNCC: 3 | RNVC: 2
P296921-402: RNCC: 5 | RNVC: 2

11 Sep 1985

5340-12-180-4706
Mounting Bracket

121804706
3805460044: RNCC: 3 | RNVC: 2

12 Sep 1979

5340-12-392-6040
Dust And Moisture Seal Protective Cap

123926040
5.1000.00.98: RNCC: 3 | RNVC: 2
908097242: RNCC: 5 | RNVC: 2

21 Jun 2013

5340-12-141-8137
Antipilferage Seal

121418137
1413200001: RNCC: 3 | RNVC: 2
0003020704: RNCC: 5 | RNVC: 2
0941830051: RNCC: 5 | RNVC: 2
1 413 200 001: RNCC: 5 | RNVC: 2
WPL2001-1X: RNCC: 5 | RNVC: 2
WPL2001-1X: RNCC: 5 | RNVC: 2
1413200001: RNCC: 5 | RNVC: 2
0003020704: RNCC: 5 | RNVC: 9
0941830051: RNCC: 5 | RNVC: 9
3020704: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-302-0472
Webbing Strap

123020472
01810-2-01258-01933-LE500-LE2300: RNCC: 3 | RNVC: 2
01810-2 2,8MR+1X1258+1X01933: RNCC: 5 | RNVC: 2
20-5220-158: RNCC: 5 | RNVC: 2
01810-2-01258-01933-2800: RNCC: 5 | RNVC: 2
01810-2-01258-01933-500/2300: RNCC: 5 | RNVC: 2
01810-2 2,8METERUND01258+01933: RNCC: 5 | RNVC: 2
79056/109/062-2800-500: RNCC: 5 | RNVC: 9
DIN60060-2-50X500X2300-C1/HAK/D4: RNCC: 5 | RNVC: 9

29 Nov 1984

5340-12-196-3333
Nut And Bolt Locking Plate

121963333
P-855936-403: RNCC: 3 | RNVC: 2
P855936-403: RNCC: 5 | RNVC: 2

28 Jun 1983

5340-12-152-3032
Retaining Strap

121523032
5800400-0065-003: RNCC: 3 | RNVC: 2
6P358-65-3: RNCC: 5 | RNVC: 2
5800400-0065-003: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-324-9576
Snap Hook

123249576
DIN5290-A: RNCC: 2 | RNVC: 2
DIN5290-A: RNCC: 3 | RNVC: 2
229: RNCC: 3 | RNVC: 9
229: RNCC: 5 | RNVC: 9
ADIN5290-229: RNCC: 5 | RNVC: 9
229 A DIN5290: RNCC: 5 | RNVC: 9

15 Apr 1991

5340-12-341-1510
Double Angle Bracket

123411510
P-297201-465: RNCC: 3 | RNVC: 2
P297201-465: RNCC: 5 | RNVC: 2

1 Aug 1996

5340-12-361-6347
Mounting Plate

123616347
704-121412-911-0: RNCC: 3 | RNVC: 2

28 Oct 2003

5340-12-701-5257
Mounting Bracket

127015257
VG95211-ML-127015257: RNCC: 2 | RNVC: 2
5.12.6102.0014.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-333-0514
Spacing Threaded Standoff

123330514
VG95148B5XM2,5X15,7-NRST: RNCC: 2 | RNVC: 2
67.3521.000.44-A057: RNCC: 3 | RNVC: 2
570127: RNCC: 5 | RNVC: 9

25 Oct 1993

5340-12-318-9611
Dust And Moisture Seal Protective Plug

123189611
00885610: RNCC: 3 | RNVC: 2
00885610EE5516-04: RNCC: 5 | RNVC: 2

28 Aug 1989

5340-12-352-6335
Mounting Bracket

123526335
1216 1444: RNCC: 3 | RNVC: 2

1 Dec 2000

5340-12-348-0894
Loop Clamp

123480894
272.494.932: RNCC: 3 | RNVC: 2
272.494932: RNCC: 5 | RNVC: 9

13 Apr 1999

5340-12-330-6050
Retaining Strap

123306050
5509952668: RNCC: 3 | RNVC: 2
5509952668: RNCC: 5 | RNVC: 2
5509952668: RNCC: 5 | RNVC: 2

15 Jan 1993

5340-12-355-5784
Rim Lock

123555784
4010N-GR: RNCC: 3 | RNVC: 2

27 Nov 2001

5340-12-365-7127
Access Cover

123657127
0417 8895: RNCC: 3 | RNVC: 2

26 Jan 2005

5340-12-333-3666
Runner

123333666
42900: RNCC: 3 | RNVC: 2

7 Dec 1993

5340-12-308-2031
Butt Hinge Leaf

123082031
86002251: RNCC: 3 | RNVC: 2

12 Sep 1986

5340-12-381-3886
Angle Bracket

123813886
4221 320 002: RNCC: 3 | RNVC: 2
15017733: RNCC: 5 | RNVC: 2
4221 320 002: RNCC: 5 | RNVC: 2

9 Feb 2010

5340-12-380-8394
Access Cover

123808394
5802017-719100.02: RNCC: 2 | RNVC: 2
5802017-719100.02: RNCC: 3 | RNVC: 2

3 Dec 2009

5340-12-330-1324
Strap Hinge

123301324
10 0014 348: RNCC: 3 | RNVC: 2
100014348: RNCC: 5 | RNVC: 2

6 Nov 1992

5340-12-309-7936
Access Cover

123097936
4023389: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-12-345-8789
Dust And Moisture Seal Protective Cap

123458789
36131504: RNCC: 3 | RNVC: 2

11 May 1998

5340-12-142-7471

5340-12-357-4628
Mending Plate

123574628
2500255-190010.000.0: RNCC: 2 | RNVC: 2
2500255-190010.000.0: RNCC: 3 | RNVC: 2

24 Jun 2002

5340-12-318-7644
Butt Hinge Leaf

123187644
704-126240-911-3: RNCC: 3 | RNVC: 2

15 Aug 1989

5340-12-702-4215
Angle Bracket

127024215
VG95211-ML-127024215: RNCC: 2 | RNVC: 2
5.12.7203.1020.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-7652
Mounting Bracket

127017652
VG95211-ML-127017652: RNCC: 2 | RNVC: 2
5.12.7701.8310.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-350-8316
Dust And Moisture Seal Protective Plug

123508316
700-M16X1,5-RAL6014: RNCC: 3 | RNVC: 2
GPN700-M16X1,5-RAL6014: RNCC: 5 | RNVC: 2

25 May 2000

5340-12-313-3390
Manual Control Handle

123133390
2300194-181130.000: RNCC: 3 | RNVC: 2
2300194-181130.000: RNCC: 5 | RNVC: 9
9843530: RNCC: 5 | RNVC: 9
2300194-181130.000: RNCC: 5 | RNVC: 9

23 Mar 1988

5340-12-702-4319
Mounting Bracket

127024319
VG95211-ML-127024319: RNCC: 2 | RNVC: 2
5.51.0100.1840.91: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-352-9332
Loop Clamp

123529332
DIN71555-94,5 LACK BIS 600GRAD C: RNCC: 2 | RNVC: 2
071555094502: RNCC: 3 | RNVC: 2

9 Jan 2001

5340-12-194-4668
Pipe Bracket

121944668
A-295136-001: RNCC: 3 | RNVC: 2
A295136-001: RNCC: 5 | RNVC: 2

8 Nov 1982

5340-12-373-4809
Mounting Plate

123734809
9999068-180010.000.0: RNCC: 3 | RNVC: 2

7 Nov 2007

5340-12-350-2210
Mounting Bracket

123502210
VG95211-ML-123502210: RNCC: 2 | RNVC: 2
AM9405202-0: RNCC: 3 | RNVC: 2

29 Feb 2000

5340-12-166-9243
Retaining Strap

121669243
2300002-041120.000: RNCC: 2 | RNVC: 2
2300002-041120.000: RNCC: 3 | RNVC: 2
2300002-041120: RNCC: 5 | RNVC: 9
2300002-041120: RNCC: 5 | RNVC: 9

6 Nov 1976

5340-12-332-1293
Flush Lock

123321293
1H1837016A: RNCC: 3 | RNVC: 9

21 Jul 1993

5340-12-195-2112
Angle Bracket

121952112
5573832: RNCC: 3 | RNVC: 2
557.3832: RNCC: 5 | RNVC: 2

26 Jan 1983

5340-12-158-3913
Retaining Clip

121583913
122701: RNCC: 3 | RNVC: 2
122701: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-004-3874

5340-12-004-3745

5340-12-161-3674
Loop Clamp

121613674
TF5D200: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-374-5308
Door Holder

123745308
2 0000-570: RNCC: 3 | RNVC: 2
2 0000-570: RNCC: 5 | RNVC: 2

22 Feb 2008

5340-12-377-4788
Runner

123774788
8605001.3.550.06: RNCC: 3 | RNVC: 2
8605001355006: RNCC: 5 | RNVC: 2

19 Jan 2009

5340-12-328-8725
Double Angle Bracket

123288725
4.0045: RNCC: 3 | RNVC: 2
0009190314: RNCC: 5 | RNVC: 2

26 Jun 1992

5340-12-307-1955
Electronic Equipment Hardware Kit

123071955
TL4023/1: RNCC: 3 | RNVC: 2

21 May 1986

5340-12-365-3724
Angle Bracket

123653724
2300109-970477.001.0: RNCC: 3 | RNVC: 2

23 Dec 2004

5340-12-365-3503
Double Angle Bracket

123653503
2300109-970483.001.0: RNCC: 3 | RNVC: 2

22 Dec 2004

5340-12-321-9661
Dust And Moisture Seal Protective Plug

123219661
1463203414: RNCC: 3 | RNVC: 2
1463203414: RNCC: 5 | RNVC: 2
1463203379: RNCC: 5 | RNVC: 9

12 Jul 1990

5340-12-344-5648
Access Cover

123445648
2.201 029: RNCC: 3 | RNVC: 2
2.201 029: RNCC: 5 | RNVC: 2

7 Nov 1997

5340-12-190-1184
Dust And Moisture Seal Protective Cap

121901184
10-150964-243: RNCC: 3 | RNVC: 2

9 Nov 1981

5340-12-356-9611
Mounting Bracket

123569611
T623M2201102: RNCC: 3 | RNVC: 2

19 Apr 2002

5340-12-378-1822
Turnbuckle Body

123781822
233505401: RNCC: 3 | RNVC: 2

18 Mar 2009

5340-12-301-9940
Retaining Strap

123019940
3159955010: RNCC: 3 | RNVC: 2

24 Nov 1984

5340-12-357-1593
Angle Bracket

123571593
5502030043: RNCC: 3 | RNVC: 2
15010248: RNCC: 5 | RNVC: 2

14 May 2002

5340-12-090-5351

5340-12-041-6724

5340-12-043-1815

5340-12-700-1968
Dust And Moisture Seal Boot

127001968
51-260067054: RNCC: 2 | RNVC: 2
765-05-369: RNCC: 3 | RNVC: 2

5 Nov 1991

5340-12-700-8697
Loop Clamp

127008697
VG95211-ML-127008697: RNCC: 2 | RNVC: 2
155N464-682: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-6597
Angle Bracket

127016597
VG95211-ML-127016597: RNCC: 2 | RNVC: 2
5.12.7210.1003.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-384-4223
Mechanic Equipment Hardware Kit

123844223
S3157-A-11-3: RNCC: 3 | RNVC: 2

23 Feb 2011

5340-12-359-8699
Mounting Plate

123598699
P-087225-039: RNCC: 3 | RNVC: 2
P087225-039: RNCC: 5 | RNVC: 2
P-087225-039: RNCC: 5 | RNVC: 2

17 Mar 2003

5340-12-306-1609
Butt Hinge

123061609
957-311000.01.0: RNCC: 3 | RNVC: 2
957-311000.01.0: RNCC: 5 | RNVC: 9

31 Jan 1986

5340-12-182-1558
Loop Clamp

121821558
2105012: RNCC: 3 | RNVC: 2
3040/LGK: RNCC: 5 | RNVC: 2
3040LGK: RNCC: 5 | RNVC: 2
5.N3821-051-10: RNCC: 5 | RNVC: 9
3040LGK-GLASKLAR: RNCC: 5 | RNVC: 9

16 Jan 1980

5340-12-319-9382
Mounting Bracket

123199382
1202 2623: RNCC: 3 | RNVC: 2
12022623ED0112-36: RNCC: 5 | RNVC: 2
26.150-159.3: RNCC: 5 | RNVC: 2

20 Nov 1989

5340-12-349-3886
Mounting Bracket

123493886
VG95211-ML-123493886: RNCC: 2 | RNVC: 2
Y241-15-001-01: RNCC: 3 | RNVC: 2

9 Nov 1999

5340-12-702-6403
Mounting Bracket

127026403
VG95211-ML-127026403: RNCC: 2 | RNVC: 2
84.7601-1230: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-359-8141
Access Cover

123598141
2500261-180000.016.0: RNCC: 2 | RNVC: 2
2500261-180000.016.0: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-12-345-8844
Spacing Threaded Standoff

123458844
4172-523: RNCC: 3 | RNVC: 2
4172523: RNCC: 5 | RNVC: 2

12 May 1998

5340-12-325-1548
Manual Control Lever

123251548
04410-35: RNCC: 3 | RNVC: 2
441-35: RNCC: 5 | RNVC: 9
NLM441-35: RNCC: 5 | RNVC: 9
NLM4410-35: RNCC: 5 | RNVC: 9

8 May 1991

5340-12-358-3313
Mounting Plate

123583313
2500262-323000.002.0: RNCC: 2 | RNVC: 2
2500262-323000.002.0: RNCC: 3 | RNVC: 2

14 Oct 2002

5340-12-386-2290
Manual Control Lever

123862290
2481-391002.002.0: RNCC: 2 | RNVC: 2
2481-391002.002.0: RNCC: 3 | RNVC: 2

17 Aug 2011

5340-12-322-8996
Dust And Moisture Seal Protective Cap

123228996
1000118-2.6: RNCC: 2 | RNVC: 2
1000118-2.6: RNCC: 3 | RNVC: 2

5 Oct 1990

5340-12-340-6358
Access Cover

123406358
DECKEL RSG 1: RNCC: 3 | RNVC: 2

15 May 1996

5340-12-324-0354
Mounting Bracket

123240354
23305-261050.00.0: RNCC: 2 | RNVC: 2
23305-261050.00.0: RNCC: 3 | RNVC: 2

17 Jan 1991

5340-12-164-0370
Loop Clamp

121640370
105-90022.41: RNCC: 3 | RNVC: 2
105-90022-41: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-328-9388
Leakproof Seal Plug

123289388
0295 0867: RNCC: 3 | RNVC: 2
02950867EE0704-98: RNCC: 5 | RNVC: 2
2950867EE0704-98: RNCC: 5 | RNVC: 2

2 Jul 1992

5340-12-307-9703
Spring Tension Clip

123079703
33A47-0026-00.001: RNCC: 3 | RNVC: 2
FS26449: RNCC: 5 | RNVC: 9

15 Aug 1986

5340-12-164-4027
Retaining Strap

121644027
23290-121110.002: RNCC: 2 | RNVC: 2
23290-121110.002: RNCC: 3 | RNVC: 2
23290-121110.002: RNCC: 5 | RNVC: 9
23290-121110-002: RNCC: 5 | RNVC: 9
23290-121110.002: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-179-1786
Mounting Bracket

121791786
5801113-111121: RNCC: 3 | RNVC: 2

15 Jun 1979

5340-12-702-2091
Mounting Plate

127022091
VG95211-ML-127022091: RNCC: 2 | RNVC: 2
30.7215.1002: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-137-8612
Strap Fastener Loop

121378612
DIN6406-A32-MS: RNCC: 2 | RNVC: 2
A32DIN6406MS: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-004-2092

5340-12-004-3242

5340-12-010-0894

5340-12-343-0935
Dust And Moisture Seal Protective Plug

123430935
017-1336: RNCC: 3 | RNVC: 2

28 Apr 1997

5340-12-357-5421
Loop Clamp

123575421
5559855: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-12-317-7006
Loop Clamp

123177006
42035035: RNCC: 3 | RNVC: 2
42035035ED5021-68: RNCC: 5 | RNVC: 2

2 May 1989

5340-12-339-5281
Plug Button

123395281
81464310013: RNCC: 3 | RNVC: 2
5000-000906-45000-2: RNCC: 5 | RNVC: 2
81.46431.0013: RNCC: 5 | RNVC: 2
47000/50: RNCC: 5 | RNVC: 2

30 Nov 1995

5340-12-393-4453
Helical Compression Spring Seat

123934453
1-34-25926-550: RNCC: 3 | RNVC: 2

17 Sep 2013

5340-12-168-5110
Access Cover

121685110
1000025-260630.08: RNCC: 3 | RNVC: 2
1000025-260630-08: RNCC: 3 | RNVC: 2
1000025-260630-08: RNCC: 5 | RNVC: 9
1000025-260630.08: RNCC: 5 | RNVC: 9

18 Mar 1977

5340-12-363-8499
Angle Bracket

123638499
J92226492-001: RNCC: 3 | RNVC: 2

30 Jul 2004

5340-12-365-0196
Spacing Threaded Standoff

123650196
AFG072381-01: RNCC: 3 | RNVC: 2

24 Nov 2004

5340-12-161-2124
Retaining Strap

121612124
160-75590-22: RNCC: 3 | RNVC: 2
160-75590-22: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-375-7524
Mechanical Stop

123757524
D0103880-001: RNCC: 3 | RNVC: 2

2 Jul 2008

5340-12-309-0411
Mending Plate

123090411
5803561-000012.02: RNCC: 2 | RNVC: 2
7400085-1212.02: RNCC: 3 | RNVC: 2

10 Dec 1986

5340-12-188-8033
Nonmetallic Bumper

121888033
VG95092B10X5NR60: RNCC: 2 | RNVC: 2
82200-B10X5.NR60: RNCC: 3 | RNVC: 2
007.5576: RNCC: 3 | RNVC: 2
B10X5.60NR: RNCC: 5 | RNVC: 2
5800145-110-01: RNCC: 5 | RNVC: 2
5800145-110.01: RNCC: 5 | RNVC: 2
VG95092 B10X5 NR60: RNCC: 5 | RNVC: 2
5800145-110-01: RNCC: 5 | RNVC: 9
5800145-110.01: RNCC: 5 | RNVC: 9

30 Jul 1981

5340-12-157-4523
Loop Clamp

121574523
5L3829-340-28: RNCC: 3 | RNVC: 2
1671310006: RNCC: 5 | RNVC: 2
K0BE6Z7Z: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-005-1092

5340-12-004-2760

5340-12-313-7396
Rod End Clevis

123137396
1483121040: RNCC: 3 | RNVC: 2
1483121040: RNCC: 5 | RNVC: 2
1483121040: RNCC: 5 | RNVC: 9

29 Apr 1988

5340-12-185-2239
Manual Control Handle

121852239
1000093-35061.02.0: RNCC: 2 | RNVC: 2
1000093-35061.02.0: RNCC: 3 | RNVC: 2
1000093-35061-02-0: RNCC: 5 | RNVC: 2
1000093-35061.02.0: RNCC: 5 | RNVC: 9
1000093-35061-02-0: RNCC: 5 | RNVC: 9

23 Sep 1980

5340-12-381-0850
Webbing Strap

123810850
01803/P-2-01244/FE800-LE500: RNCC: 3 | RNVC: 2

8 Jan 2010

5340-12-335-6370
Butt Hinge Leaf

123356370
2300285-181000.006.0: RNCC: 2 | RNVC: 2
2300285-181000.006.0: RNCC: 3 | RNVC: 2

7 Sep 1994

5340-12-366-7644
Mounting Plate

123667644
2300421-181057.002: RNCC: 2 | RNVC: 2
2300421-181057.002: RNCC: 3 | RNVC: 2

6 Jun 2005

5340-12-310-9930
Double Angle Bracket

123109930
NGE 108-2570: RNCC: 3 | RNVC: 2

16 Jul 1987

5340-12-377-3959
Blank Panel

123773959
5400051-436100.09: RNCC: 2 | RNVC: 2
5400051-436100.09: RNCC: 3 | RNVC: 2

14 Jan 2009

5340-12-317-3220
Mounting Plate

123173220
4900064-4122.018: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-339-7040
Rod End Clevis

123397040
0026-2095-020: RNCC: 3 | RNVC: 2
0026-2095-020: RNCC: 5 | RNVC: 9

22 Dec 1995

5340-12-306-8815
Mending Plate

123068815
C150ZZ32001-000: RNCC: 3 | RNVC: 2

14 Apr 1986

5340-12-356-4544
Mounting Bracket

123564544
P70157102010: RNCC: 3 | RNVC: 2

1 Mar 2002

5340-12-361-4334
Angle Bracket

123614334
1504287: RNCC: 3 | RNVC: 2

29 Sep 2003

5340-12-303-2147
Resilient Mount

123032147
251399201K: RNCC: 3 | RNVC: 9

6 Mar 1985

5340-12-123-4000
Retaining Strap

121234000
81974010188: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-379-9023
Section Block Clamp

123799023
58030278: RNCC: 3 | RNVC: 2
58030278: RNCC: 5 | RNVC: 2
CV169071: RNCC: 5 | RNVC: 2

10 Sep 2009

5340-12-702-7093
Turnbuckle

127027093
25-08301027144: RNCC: 2 | RNVC: 2

5 Dec 1995

5340-12-315-0229
Verbindungs Platte

5340-12-326-4449
Angle Bracket

123264449
3963120587: RNCC: 3 | RNVC: 2

17 Sep 1991

5340-12-195-2111
Access Cover

121952111
5573826: RNCC: 3 | RNVC: 2
557.3826: RNCC: 5 | RNVC: 2

26 Jan 1983

5340-12-314-5456
Mending Plate

123145456
3819940009: RNCC: 3 | RNVC: 2
381 994 00 09: RNCC: 5 | RNVC: 2

16 Jul 1988

5340-12-365-3307
Access Cover

123653307
2300397-050202.001.0: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-12-393-4019
Loop Clamp

123934019
7-602-034-001-13V: RNCC: 3 | RNVC: 2

13 Sep 2013

5340-12-304-5741
Mending Plate

123045741
123017: RNCC: 3 | RNVC: 2
123017: RNCC: 5 | RNVC: 2
123017: RNCC: 5 | RNVC: 9

1 Aug 1985

5340-12-195-0988
Angle Bracket

121950988
Z01.52.04: RNCC: 3 | RNVC: 2

12 Jan 1983

5340-12-197-9414
Ball Socket Seat

121979414
3522930112: RNCC: 3 | RNVC: 2

2 Dec 1983

5340-12-128-0203

5340-12-174-5414
Retaining Strap

121745414
52-0164-838-00: RNCC: 3 | RNVC: 2

10 Jul 1978

5340-12-359-8155
Mounting Plate

123598155
2500261-184000.012.0: RNCC: 2 | RNVC: 2
2500261-184000.012.0: RNCC: 3 | RNVC: 2

12 Mar 2003

5340-12-378-3844
Caster Set

123783844
5400053-372518.00: RNCC: 2 | RNVC: 2
5400053-372518.00: RNCC: 3 | RNVC: 2

1 Apr 2009

5340-12-307-9423
Mending Plate

123079423
5801434-514000.01: RNCC: 2 | RNVC: 2
7800544001: RNCC: 3 | RNVC: 2
78005 44001: RNCC: 5 | RNVC: 9

13 Aug 1986

5340-12-371-4895
Double Angle Bracket

123714895
23302-188000.41: RNCC: 2 | RNVC: 2
23302-188000.41: RNCC: 3 | RNVC: 2
3-3017-250: RNCC: 5 | RNVC: 2
3017250: RNCC: 5 | RNVC: 2

5 Apr 2007

5340-12-151-0616
Electrical-Mechanical Equipment Post

121510616
5800359-010120-02: RNCC: 3 | RNVC: 2
5800359-010120-02: RNCC: 5 | RNVC: 9
5800359-010120.02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-315-2417
Electrical-Mechanical Equipment Post

123152417
4900153-31311-00-01: RNCC: 3 | RNVC: 2
4900153-31311-01: RNCC: 5 | RNVC: 9

6 Oct 1988

5340-12-326-4282
Protection Bellows

123264282
DP33/18: RNCC: 3 | RNVC: 2
DP33/18: RNCC: 5 | RNVC: 2

13 Sep 1991

5340-12-343-6688
Mounting Bracket

123436688
2300002-122665.000: RNCC: 2 | RNVC: 2
9914008: RNCC: 3 | RNVC: 2
2300002-122665.000: RNCC: 5 | RNVC: 2
2300002-122665.000: RNCC: 5 | RNVC: 9
9914008: RNCC: 5 | RNVC: 9

14 Jul 1997

5340-12-316-6614
Mounting Bracket

123166614
51114020019: RNCC: 3 | RNVC: 2
51114020019: RNCC: 3 | RNVC: 2
51.11402-0019: RNCC: 5 | RNVC: 2
51.11402-0019: RNCC: 5 | RNVC: 2

31 Jan 1989

5340-12-320-8119
Retaining Clip

123208119
781 9001 400 01: RNCC: 3 | RNVC: 2

19 Feb 1990

5340-12-357-6136
Mechanic Equipment Hardware Kit

123576136
JT 403 203 AT: RNCC: 2 | RNVC: 2
JT 403 203 AT: RNCC: 3 | RNVC: 2
JT403203: RNCC: 5 | RNVC: 2
JT403203AT: RNCC: 5 | RNVC: 2
JT 403 203: RNCC: 5 | RNVC: 2

8 Jul 2002

5340-12-177-3011
Access Cover

121773011
344011775: RNCC: 3 | RNVC: 2

24 Jan 1979

5340-12-310-5409
Metal Runner

123105409
4227201: RNCC: 3 | RNVC: 2

29 May 1987

5340-12-027-3373

5340-12-321-1609
Rigid Caster

123211609
TKW RHR025.101: RNCC: 3 | RNVC: 2

6 Apr 1990

5340-12-339-1321
Door Button

123391321
802 923 00: RNCC: 3 | RNVC: 2
0008660569: RNCC: 5 | RNVC: 2
2514302: RNCC: 5 | RNVC: 2

13 Oct 1995

5340-12-368-9805
Dirt And Liquid Deflector

123689805
1068860: RNCC: 3 | RNVC: 2

10 May 2006

5340-12-371-2819
Angle Bracket

123712819
S535M1156214: RNCC: 2 | RNVC: 2
S535M1156214: RNCC: 3 | RNVC: 2

8 Mar 2007

5340-12-394-1190
Access Cover

123941190
131W252000.007.0: RNCC: 2 | RNVC: 2
131W252000.007.0: RNCC: 3 | RNVC: 2
131W252000.007.0: RNCC: 5 | RNVC: 2

6 Nov 2013

5340-12-312-1369
Mounting Bracket

123121369
2300147-400130.000.0: RNCC: 2 | RNVC: 2
2300147-400130.000.0: RNCC: 3 | RNVC: 2

25 Nov 1987

5340-12-301-7687
Nonmetallic Bumper

123017687
4178752: RNCC: 3 | RNVC: 2
S12B.K.02.05.02.003: RNCC: 5 | RNVC: 2
S12B.K02.05.02.003: RNCC: 5 | RNVC: 2

8 Nov 1984

5340-12-329-1558
Pad Eye

123291558
2300232-991612.000.0: RNCC: 2 | RNVC: 2
2300232-991612.000.0: RNCC: 3 | RNVC: 2

22 Jul 1992

5340-12-318-3920
Shimmy Damper

123183920
084484: RNCC: 3 | RNVC: 2
E4820005: RNCC: 5 | RNVC: 2

10 Jul 1989

5340-12-359-4310
Double Angle Bracket

123594310
170.5007: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-12-318-5109
Dust And Moisture Seal Protective Cap

123185109
3250010998: RNCC: 3 | RNVC: 2
32500 10998: RNCC: 5 | RNVC: 9

21 Jul 1989

5340-12-350-5938
Manual Control Handle

123505938
54.2732.233.01: RNCC: 2 | RNVC: 2
54.2732.233.01: RNCC: 3 | RNVC: 2

18 Apr 2000

5340-12-342-3910
Blank Panel

123423910
326324: RNCC: 3 | RNVC: 2
67.6081.000.04-A003: RNCC: 5 | RNVC: 2

31 Jan 1997

5340-12-345-4459
Mounting Bracket

123454459
54.0053.169.00: RNCC: 3 | RNVC: 2

17 Mar 1998

5340-12-136-5965
Klemme

121365965
0019884078: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-358-0151
Mounting Bracket

123580151
81637350020: RNCC: 3 | RNVC: 2
81.63735.0020: RNCC: 5 | RNVC: 2

2 Sep 2002

5340-12-369-9266
Manual Control Lever

123699266
66014: RNCC: 3 | RNVC: 2

28 Aug 2006

5340-12-177-0161
Pipe Bracket

121770161
51974805003: RNCC: 3 | RNVC: 2

3 Jan 1979

5340-12-322-8846
Dust And Moisture Seal Protective Plug

123228846
A11A294010261U1: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-12-134-3120
Nut And Bolt Locking Plate

121343120
26-10-13-4: RNCC: 3 | RNVC: 2
26-10-13-4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-153-1842
Retaining Clip

121531842
61-479: RNCC: 3 | RNVC: 2
13111254765: RNCC: 5 | RNVC: 2
4798-252: RNCC: 5 | RNVC: 2
4798252: RNCC: 5 | RNVC: 2
0639104000: RNCC: 5 | RNVC: 2
S000639104000000: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-310-9923
Electrical-Mechanical Equipment Post

123109923
NGE 108-2550: RNCC: 3 | RNVC: 2

16 Jul 1987

5340-12-333-7110
Lock-Release Lever

123337110
26-21C1008 G001-P11: RNCC: 3 | RNVC: 2
26-21C1008G001P11: RNCC: 5 | RNVC: 2

27 Jan 1994

5340-12-179-0147
Dust And Moisture Seal Protective Plug

121790147
2415948EE0148-44: RNCC: 3 | RNVC: 2
4073960: RNCC: 5 | RNVC: 2
0241 5948: RNCC: 5 | RNVC: 2
2415948: RNCC: 5 | RNVC: 9

30 May 1979

5340-12-161-7275
Loop Clamp

121617275
ZWSP14-11/12SKZ: RNCC: 3 | RNVC: 2
1337006014: RNCC: 5 | RNVC: 2
ZWSP14-11-12SKZ: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-393-0542
Swivel Caster

123930542
406A04R100VEPS: RNCC: 3 | RNVC: 2
406A-04R-100V-EPS: RNCC: 5 | RNVC: 2

2 Aug 2013

5340-12-125-5062
Helical Compression Spring Seat

121255062
NO PRIMARY REF 12-125-5062: RNCC: 3 | RNVC: 2
118140: RNCC: 5 | RNVC: 9
E22: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-318-7329
Mending Plate

123187329
704-123110-906-3: RNCC: 3 | RNVC: 2

11 Aug 1989

5340-12-184-3593
Strap Hinge

121843593
5801357-1840.02F: RNCC: 2 | RNVC: 2
5801357-1840.02F: RNCC: 3 | RNVC: 2
5801357-1840-02F: RNCC: 5 | RNVC: 9
5801357-1840-02F: RNCC: 5 | RNVC: 9
5801357-1840-02F: RNCC: 5 | RNVC: 9

19 Jul 1980

5340-12-154-7972
Loop Clamp

121547972
51.0288.226-01: RNCC: 3 | RNVC: 2
51-0288-226-01: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-173-0098
Nonmetallic Bumper

121730098
1107680195: RNCC: 3 | RNVC: 2
2EE057-2: RNCC: 5 | RNVC: 2

13 Mar 1978

5340-12-196-2821
Pad Eye

121962821
26215-001: RNCC: 3 | RNVC: 2
26215-001: RNCC: 5 | RNVC: 2
26 215-001: RNCC: 5 | RNVC: 9
1392265-050657.002: RNCC: 5 | RNVC: 9

22 Jun 1983

5340-12-043-2677

5340-12-393-9756
Mounting Plate

123939756
L311M1609102: RNCC: 3 | RNVC: 2

25 Oct 2013

5340-12-165-6672
Nut And Bolt Locking Plate

121656672
636G04001: RNCC: 3 | RNVC: 2

11 Jun 1976

5340-12-319-3381
Angle Bracket

123193381
5802006-632000.01: RNCC: 2 | RNVC: 2
5802006-632000.01: RNCC: 3 | RNVC: 2

25 Sep 1989

5340-12-334-2869
Mending Plate

123342869
M642101: RNCC: 3 | RNVC: 9

22 Apr 1994

5340-12-197-4479
Plain Solid Disk

121974479
3129900043: RNCC: 3 | RNVC: 2

24 Oct 1983

5340-12-188-4581
Mounting Bracket

121884581
CF 431 000 A: RNCC: 3 | RNVC: 2
CF 431 000 A: RNCC: 5 | RNVC: 2
CF431000A: RNCC: 5 | RNVC: 9
CF431000A: RNCC: 5 | RNVC: 9
CF431000A: RNCC: 5 | RNVC: 9

13 Jul 1981

5340-12-371-5813
Mounting Bracket

123715813
2300525-850010.000.0: RNCC: 3 | RNVC: 2
1782626: RNCC: 5 | RNVC: 9

20 Apr 2007

5340-12-319-1468
Mending Plate

123191468
01811-3: RNCC: 3 | RNVC: 2
SK7033: RNCC: 5 | RNVC: 2

11 Sep 1989

5340-12-386-0491
Key Blank

123860491
EP.B.7816: RNCC: 3 | RNVC: 2

3 Aug 2011

5340-12-371-2817
Webbing Strap

123712817
2300525-970473.000.0: RNCC: 3 | RNVC: 2

8 Mar 2007

5340-12-388-0940
Access Door Hinge

123880940
1690-492540.000.0: RNCC: 3 | RNVC: 2

23 Feb 2012

5340-12-308-9746
Double Angle Bracket

123089746
2859070157: RNCC: 3 | RNVC: 2

3 Dec 1986

5340-12-349-9079
Mending Plate

123499079
A1Z10283369: RNCC: 2 | RNVC: 2
A1Z10283369: RNCC: 3 | RNVC: 2
20360947: RNCC: 5 | RNVC: 2

24 Jan 2000

5340-12-302-6300
Lock-Release Lever

123026300
5801101-2121.007: RNCC: 3 | RNVC: 2

18 Jan 1985

5340-12-331-9146
Barrel Bolt

123319146
2512/125MM: RNCC: 3 | RNVC: 2
2512-125MM: RNCC: 5 | RNVC: 2
2512/125MM: RNCC: 5 | RNVC: 2

6 Jul 1993

5340-12-137-1048
Butt Hinge

121371048
DIN7954-B50-MS-BK: RNCC: 2 | RNVC: 2
B50DIN7954MS: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-184-7192
Spring Tension Clip

121847192
9KX 088 567-00: RNCC: 3 | RNVC: 2
311941125A: RNCC: 5 | RNVC: 2
088567-00: RNCC: 5 | RNVC: 2
88567: RNCC: 5 | RNVC: 2
9KX088567-00: RNCC: 5 | RNVC: 9

14 Aug 1980

5340-12-327-1626
Webbing Strap

123271626
5600023-970450.000.0: RNCC: 2 | RNVC: 2
5600023-970450.000.0: RNCC: 3 | RNVC: 2
22012.0.00.000.16: RNCC: 5 | RNVC: 2

10 Dec 1991

5340-12-382-1040
Retaining Strap

123821040
2197804: RNCC: 3 | RNVC: 2

10 May 2010

5340-12-043-5938

5340-12-026-3452

5340-12-300-8459
Angle Bracket

123008459
4255241440: RNCC: 3 | RNVC: 2

4 Sep 1984

5340-12-304-7823
Double Angle Bracket

123047823
P209279684104062: RNCC: 3 | RNVC: 2

26 Aug 1985

5340-12-300-2081
Lock-Release Lever

123002081
30-79350-0180: RNCC: 3 | RNVC: 2
30.79350-0180: RNCC: 5 | RNVC: 2

14 Jul 1984

5340-12-362-5487
Angle Bracket

123625487
JN0145-01N25: RNCC: 3 | RNVC: 2

6 Mar 2004

5340-12-378-0042
Dust And Moisture Seal Protective Plug

123780042
504066157: RNCC: 3 | RNVC: 2

4 Mar 2009

5340-12-002-1338

5340-12-391-7498
Webbing Strap

123917498
121W162150.000.0: RNCC: 2 | RNVC: 2
121W162150.000.0: RNCC: 3 | RNVC: 2

3 Apr 2013

5340-12-394-0455
Access Cover

123940455
310.02.F: RNCC: 3 | RNVC: 2
310.02.F: RNCC: 5 | RNVC: 2

31 Oct 2013

5340-12-356-3694
Hand Crank

123563694
8235.2.10.00: RNCC: 3 | RNVC: 2

19 Feb 2002

5340-12-356-2599
Mounting Bracket

123562599
5362.008.9: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-12-393-0084
Mounting Bracket

123930084
L232M7812101: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-12-172-8610
Retaining Strap

121728610
02520658: RNCC: 3 | RNVC: 2
2520658EE5017-90: RNCC: 5 | RNVC: 2

27 Feb 1978

5340-12-364-2481
Mounting Bracket

123642481
4257500914: RNCC: 3 | RNVC: 2

3 Sep 2004

5340-12-347-2133
Webbing Strap

123472133
400040: RNCC: 3 | RNVC: 2
400040: RNCC: 5 | RNVC: 2
400040: RNCC: 5 | RNVC: 9

12 Nov 1998

5340-12-392-9884
Mounting Bracket

123929884
9169224103: RNCC: 3 | RNVC: 2

29 Jul 2013

5340-12-359-5277
Rod End Clevis

123595277
EL670.01.017: RNCC: 3 | RNVC: 2

13 Feb 2003

5340-12-135-6745

5340-12-196-4888
Angle Bracket

121964888
5801435-050800.03: RNCC: 2 | RNVC: 2
5801435-050800.03: RNCC: 3 | RNVC: 2
5801435-050800-03: RNCC: 5 | RNVC: 2

12 Jul 1983

5340-12-359-9500
Mounting Plate

123599500
2500261-184000.009.0: RNCC: 2 | RNVC: 2
2500261-184000.009.0: RNCC: 3 | RNVC: 2

24 Mar 2003

5340-12-701-6385
Mounting Plate

127016385
VG95211-ML-127016385: RNCC: 2 | RNVC: 2
5.12.7070.1540.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-391-4694
Mounting Bracket

123914694
I010479: RNCC: 3 | RNVC: 2

13 Mar 2013

5340-12-330-0819
Nonmetallic Bumper

123300819
089321397: RNCC: 3 | RNVC: 2
089-321-397: RNCC: 5 | RNVC: 2
089-321-397: RNCC: 5 | RNVC: 2

30 Oct 1992

5340-12-376-3139
Nut And Bolt Locking Plate

123763139
832B06019/1: RNCC: 3 | RNVC: 2

11 Sep 2008

5340-12-323-9403
Nonmetallic Solid Wheel

123239403
A75-1: RNCC: 3 | RNVC: 2

10 Jan 1991

5340-12-319-4540
Access Cover

123194540
7068-61130-000-2: RNCC: 3 | RNVC: 2

3 Oct 1989

5340-12-317-6534
Dust And Moisture Seal Protective Plug

123176534
700/1/2"-20UNF: RNCC: 3 | RNVC: 2
GPN700/1/2"-20UNF: RNCC: 5 | RNVC: 2
GPN700,1/2IN-20UNF FORM A: RNCC: 5 | RNVC: 9
GPN700/1/2IN-20 UNF FORMA: RNCC: 5 | RNVC: 9
GPN700-1/2-20UNF: RNCC: 5 | RNVC: 9
GPN700-A1/2-20UNF: RNCC: 5 | RNVC: 9
GPN700/1/2IN-20UNF: RNCC: 5 | RNVC: 9

26 Apr 1989

5340-12-128-8799
Resilient Mount

121288799
64205001.NR60.ST: RNCC: 3 | RNVC: 2
732272MITTEL: RNCC: 3 | RNVC: 2
732272-NR60.ST: RNCC: 5 | RNVC: 2
0064205001.NR60.ST: RNCC: 5 | RNVC: 2
732272-60: RNCC: 5 | RNVC: 2
1215 0478: RNCC: 5 | RNVC: 2
6-000-9-703-001-4: RNCC: 5 | RNVC: 9
6.000.9.703.001.4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-3797
Rod End Connector

127023797
VG95211-ML-127023797: RNCC: 2 | RNVC: 2
5.12.5101.4930.97: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-320-3997
Angle Bracket

123203997
P-296828-011: RNCC: 3 | RNVC: 2
P296828-011: RNCC: 5 | RNVC: 2

11 Jan 1990

5340-12-307-3749
Mending Plate

123073749
3609501: RNCC: 3 | RNVC: 2

10 Jun 1986

5340-12-352-2356
Mounting Bracket

123522356
T535M1515101: RNCC: 3 | RNVC: 2

27 Oct 2000

5340-12-333-5466
Webbing Strap

123335466
2300005-4195.00: RNCC: 2 | RNVC: 2
2300005-4195.00: RNCC: 3 | RNVC: 2
9903535: RNCC: 5 | RNVC: 9
2300005-4195.00: RNCC: 5 | RNVC: 9

4 Jan 1994

5340-12-348-6694
Mechanical Stop

123486694
1021301: RNCC: 3 | RNVC: 2

3 Aug 1999

5340-12-384-6521
Access Cover

123846521
1558F38545: RNCC: 3 | RNVC: 2

16 Mar 2011

5340-12-197-2231
Rod End Clevis

121972231
8000.10-02: RNCC: 3 | RNVC: 2

3 Oct 1983

5340-12-384-8728
Helical Compression Spring Seat

123848728
F1.1189-40-10-10.00-03: RNCC: 3 | RNVC: 2

6 Apr 2011

5340-12-177-1420
Retaining Strap

121771420
2300002-031500.004: RNCC: 2 | RNVC: 2
2300002-031500.004: RNCC: 3 | RNVC: 2
2300002-031500-004: RNCC: 5 | RNVC: 9
2300002-031500.004: RNCC: 5 | RNVC: 9

17 Jan 1979

5340-12-177-4125
Double Angle Bracket

121774125
2300002-122100.056: RNCC: 2 | RNVC: 2
2300002-122100.056: RNCC: 3 | RNVC: 2
2300002-122100-056: RNCC: 5 | RNVC: 9
2300002-122100.056: RNCC: 5 | RNVC: 9

31 Jan 1979

5340-12-302-1350
Catch Strike

123021350
556-8202100.07: RNCC: 3 | RNVC: 2
4900075-2100.07: RNCC: 5 | RNVC: 9
4900075-2100-07: RNCC: 5 | RNVC: 9

6 Dec 1984

5340-12-199-3692
Spring Tension Clip

121993692
1026000120: RNCC: 3 | RNVC: 2
12MBO26PHOSPHATIERT: RNCC: 5 | RNVC: 2
12SXN26: RNCC: 5 | RNVC: 2
12MBO26 PHOSPH.: RNCC: 5 | RNVC: 2
1026000120/002: RNCC: 5 | RNVC: 2

14 Apr 1984

5340-12-338-7323
Lock-Release Lever

123387323
9894122: RNCC: 3 | RNVC: 9
463-611340.000: RNCC: 5 | RNVC: 9

22 Aug 1995

5340-12-351-7520
Helical Compression Spring Seat

123517520
2205-404: RNCC: 3 | RNVC: 2

18 Aug 2000

5340-12-388-3795
Mounting Bracket

123883795
S439M2025206: RNCC: 3 | RNVC: 2

15 Mar 2012

5340-12-363-6763
Metallic Bumper

123636763
1407660819: RNCC: 3 | RNVC: 2

14 Jul 2004

5340-12-371-5647
Retaining Strap

123715647
4608902571: RNCC: 3 | RNVC: 2

19 Apr 2007

5340-12-311-9777
Dust And Moisture Seal Protective Cap

123119777
321857621: RNCC: 3 | RNVC: 2
81.96410.0351: RNCC: 5 | RNVC: 2
81964100351: RNCC: 5 | RNVC: 2

5 Nov 1987

5340-12-198-9607
Handwheel

121989607
C14028649014: RNCC: 3 | RNVC: 2
081528649014: RNCC: 5 | RNVC: 2

16 Mar 1984

5340-12-198-9457
Hinged Hasp

121989457
4162776: RNCC: 3 | RNVC: 2
S12B.B07.00.00.017: RNCC: 5 | RNVC: 2

14 Mar 1984

5340-12-371-4553
Permanent Magnet

123714553
78762: RNCC: 3 | RNVC: 2

2 Apr 2007

5340-12-701-1914
Mounting Bracket

127011914
VG95211-ML-127011914: RNCC: 2 | RNVC: 2
5.12.0430.4400.91: RNCC: 3 | RNVC: 2
0501403312799: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-300-2849
Double Angle Bracket

123002849
23114-3598.00: RNCC: 2 | RNVC: 2
23114-3598.00: RNCC: 3 | RNVC: 2
23114-3598-00: RNCC: 5 | RNVC: 9
23114-3598.00: RNCC: 5 | RNVC: 9
23114-3598-00: RNCC: 5 | RNVC: 9

20 Jul 1984

5340-12-312-9027
Quick Release Plunger

123129027
RBN410.1-KM4: RNCC: 3 | RNVC: 2
GN615-M4-K: RNCC: 3 | RNVC: 2
KM4HWN205S: RNCC: 3 | RNVC: 2
03000-04: RNCC: 3 | RNVC: 2
1604008: RNCC: 3 | RNVC: 2
NLM300-04: RNCC: 5 | RNVC: 9
NLM3000-04: RNCC: 5 | RNVC: 9

18 Feb 1988

5340-12-357-1775
Multiple Angle Bracket

123571775
2500266-190000.007.0: RNCC: 2 | RNVC: 2
2500266-190000.007.0: RNCC: 3 | RNVC: 2

15 May 2002

5340-12-337-6854
Clamping Catch

123376854
708-133400-000-0: RNCC: 3 | RNVC: 2
708-133 400-000-0: RNCC: 5 | RNVC: 2

27 Mar 1995

5340-12-189-7688
Handwheel

121897688
VG85084-B-175X14-2.1096.01: RNCC: 2 | RNVC: 2
VG85084-B-175X14-2.1096.01: RNCC: 3 | RNVC: 2
VG85084-B-175X14-2.1096.01: RNCC: 3 | RNVC: 2
VG85084-B-175X14-2.1096.01: RNCC: 3 | RNVC: 9
B175X14VG85084GCUSN5ZNPB: RNCC: 5 | RNVC: 2
B175X14VG85084-RG5: RNCC: 5 | RNVC: 2
B175X14VG85084RG5: RNCC: 5 | RNVC: 2

21 Oct 1981

5340-12-311-6188
Rod End Clevis

123116188
P-244707-722: RNCC: 3 | RNVC: 2
P244707-722: RNCC: 5 | RNVC: 2

28 Sep 1987

5340-12-351-9471
Access Cover

123519471
1500.716.1: RNCC: 3 | RNVC: 2
15716-1: RNCC: 5 | RNVC: 2

19 Sep 2000

5340-12-337-3961
Lock-Release Lever

123373961
04037500: RNCC: 3 | RNVC: 2
04037500.873: RNCC: 5 | RNVC: 2

24 Feb 1995

5340-12-306-3986
Angle Bracket

123063986
V22.917.19-0: RNCC: 3 | RNVC: 2

26 Feb 1986

5340-12-358-3285
Mounting Plate

123583285
2500262-000000.023.0: RNCC: 2 | RNVC: 2
2500262-000000.023.0: RNCC: 3 | RNVC: 2

14 Oct 2002

5340-12-365-6362
Angle Bracket

123656362
J92228362-002: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-12-369-3294
Nonmetallic Bumper

123693294
NO PRIMARY REF 12-369-3294: RNCC: 3 | RNVC: 2
7075834: RNCC: 5 | RNVC: 2

22 Jun 2006

5340-12-352-6340
Mounting Bracket

123526340
1218 8112: RNCC: 3 | RNVC: 2

1 Dec 2000

5340-12-341-8973
Access Door

123418973
701829105AF: RNCC: 3 | RNVC: 9

13 Nov 1996

5340-12-320-1026
Angle Bracket

123201026
C195-A110-C12: RNCC: 3 | RNVC: 2

7 Dec 1989

5340-12-312-6816
Retaining Band

123126816
4200077-230-01: RNCC: 2 | RNVC: 2

27 Jan 1988

5340-12-377-3333
Retaining Bail

123773333
4100036-150416.000: RNCC: 2 | RNVC: 2
4100036-150416.000: RNCC: 3 | RNVC: 2
4100036-150416.000: RNCC: 5 | RNVC: 9

9 Jan 2009

5340-12-304-1430
Metal Runner

123041430
20700.2M9: RNCC: 3 | RNVC: 2

14 Jun 1985

5340-12-367-8739
Extension Drawer Slide

123678739
077 803: RNCC: 3 | RNVC: 2
KA3434/450: RNCC: 5 | RNVC: 2

26 Oct 2005

5340-12-305-4955
Electrical-Mechanical Equipment Post

123054955
VG95148A6XM4X50-ST: RNCC: 2 | RNVC: 2
VG95148A6XM4X50-ST: RNCC: 3 | RNVC: 2
123/180-100.03: RNCC: 3 | RNVC: 2
VG95148A6XM4X50-ST37K: RNCC: 5 | RNVC: 2

14 Nov 1985

5340-12-172-6137
Catch Strike

121726137
507118: RNCC: 3 | RNVC: 2
4230-03-08-00-00: RNCC: 5 | RNVC: 9

31 Jan 1978

5340-12-164-9605
Expansion Shield

121649605
N8/35: RNCC: 3 | RNVC: 2
019: RNCC: 5 | RNVC: 2
N8-35: RNCC: 5 | RNVC: 2
N8X35: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-702-9392
Pawl Fastener

127029392
VG95211-ML-127029392: RNCC: 2 | RNVC: 2
AEP-14: RNCC: 3 | RNVC: 2
0500891998299: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-393-9287
Vent Plug

123939287
318648: RNCC: 3 | RNVC: 2
5184-02-00-02/42: RNCC: 5 | RNVC: 2

23 Oct 2013

5340-12-370-8017
Double Angle Bracket

123708017
81436400160: RNCC: 3 | RNVC: 2
81.43640-0160: RNCC: 5 | RNVC: 2

21 Dec 2006

5340-12-178-5772
Dust And Moisture Seal Protective Plug

121785772
30-91010-0032: RNCC: 3 | RNVC: 2

3 May 1979

5340-12-366-0926
Loop Clamp

123660926
EN4114F27WR1: RNCC: 2 | RNVC: 2

8 Mar 2005

5340-12-313-7903
Manual Control Handle

123137903
1056812: RNCC: 3 | RNVC: 2
1-446-5-4: RNCC: 5 | RNVC: 2
056812: RNCC: 5 | RNVC: 9

5 May 1988

5340-12-159-6499
Retaining Band

121596499
43Z620-2: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-176-1304
Mounting Bracket

121761304
536056-0236.000: RNCC: 3 | RNVC: 2
CF 418 064 B: RNCC: 3 | RNVC: 2
CF 418 064 B: RNCC: 5 | RNVC: 2
CF418064A: RNCC: 5 | RNVC: 2
CF418064B: RNCC: 5 | RNVC: 2
CF 418 064 B: RNCC: 5 | RNVC: 2
CF418064A: RNCC: 5 | RNVC: 2
CF418064B: RNCC: 5 | RNVC: 2
CF418064A: RNCC: 5 | RNVC: 2
CF418064B: RNCC: 5 | RNVC: 2

9 Nov 1978

5340-12-701-3913
Loop Clamp

127013913
VG95211-ML-127013913: RNCC: 2 | RNVC: 2
5.12.5311.1000.29: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-379-4061
Bow Handle

123794061
GN425-10-120-CR: RNCC: 3 | RNVC: 2

21 Jul 2009

5340-12-353-5235
Access Cover

123535235
2500238-042521.000.0: RNCC: 2 | RNVC: 2
2500238-042521.000.0: RNCC: 3 | RNVC: 2

4 Apr 2001

5340-12-316-6738
Resilient Mount

123166738
5205-HDS-TY-M6: RNCC: 3 | RNVC: 2
155012-M6-HD.ST-40: RNCC: 3 | RNVC: 2
60-52-05-M-HD-M6: RNCC: 5 | RNVC: 2
5205 HDST M6: RNCC: 5 | RNVC: 9
5205-HDS-TY-M6: RNCC: 5 | RNVC: 9
VG95406-H4-3-M6-Q-H-ST: RNCC: 5 | RNVC: 9

1 Feb 1989

5340-12-701-7210
Angle Bracket

127017210
VG95211-ML-127017210: RNCC: 2 | RNVC: 2
5.12.7601.8540.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-193-1276
Turnbuckle

121931276
VG85211-2-M12: RNCC: 2 | RNVC: 2
VG85211-2-M12: RNCC: 3 | RNVC: 2
VG85211-2M12: RNCC: 5 | RNVC: 2

23 Jun 1982

5340-12-304-1208
Handwheel

123041208
4900277-30: RNCC: 2 | RNVC: 2
4900277-30: RNCC: 3 | RNVC: 2
4900277-30: RNCC: 5 | RNVC: 9

12 Jun 1985

5340-12-188-7708
Butt Hinge

121887708
J200ZZ1C000-000: RNCC: 3 | RNVC: 2

29 Jul 1981

5340-12-320-4900
Metal Runner

123204900
C117-A44-C46: RNCC: 3 | RNVC: 2

19 Jan 1990

5340-12-356-7152
Escutcheon Plate

123567152
111837239B: RNCC: 3 | RNVC: 2
111837239B01C: RNCC: 5 | RNVC: 9

26 Mar 2002

5340-12-369-0751
Angle Bracket

123690751
7803221193AA: RNCC: 3 | RNVC: 2
1030010-721000.010.0: RNCC: 5 | RNVC: 2

18 May 2006

5340-12-390-2895
Ball Socket Seat

123902895
160-25359-07: RNCC: 3 | RNVC: 2

26 Oct 2012

5340-12-358-1776
Manual Control Lever

123581776
13.10.61: RNCC: 3 | RNVC: 2

24 Sep 2002

5340-12-320-1030
Mending Plate

123201030
C195-A101-C179: RNCC: 3 | RNVC: 2

7 Dec 1989

5340-12-329-9054
Nonmetallic Bumper

123299054
1300555-320050-00-01: RNCC: 2 | RNVC: 2
GE5011G025: RNCC: 3 | RNVC: 2

10 Oct 1992

5340-12-199-9031
Webbing Strap

121999031
79017/026-1500-0600: RNCC: 3 | RNVC: 2
220-00-0057-3: RNCC: 5 | RNVC: 2
79017/026-1500-600: RNCC: 5 | RNVC: 2
DIN60060-2-25X600X900-C4/D2: RNCC: 5 | RNVC: 9

15 Jun 1984

5340-12-164-8055
Bow Handle

121648055
468-925-70-05: RNCC: 3 | RNVC: 2
2663-628: RNCC: 5 | RNVC: 2
2663628: RNCC: 5 | RNVC: 2
468-925-70-05: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-308-8713
Plug Button

123088713
1281-16110.03: RNCC: 2 | RNVC: 2
159372: RNCC: 3 | RNVC: 2
1281-16110.03: RNCC: 5 | RNVC: 2

25 Nov 1986

5340-12-301-8865
Loop Clamp

123018865
20-4220-070: RNCC: 3 | RNVC: 2

15 Nov 1984

5340-12-173-4570
Retaining Strap

121734570
LN29836B1-50: RNCC: 2 | RNVC: 2

18 Apr 1978

5340-12-387-9302
Dust And Moisture Seal Protective Plug

123879302
7093874: RNCC: 3 | RNVC: 2

9 Feb 2012

5340-12-123-4583
Retaining Strap

121234583
81974010138: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-010-4319

5340-12-353-0902
Angle Bracket Set

123530902
650.33: RNCC: 3 | RNVC: 2

26 Jan 2001

5340-12-303-2352
Hand Crank

123032352
BHAA005: RNCC: 3 | RNVC: 2
BH AA 005: RNCC: 5 | RNVC: 2
KMR HK 250.100: RNCC: 5 | RNVC: 9

8 Mar 1985

5340-12-302-8440
Sealing Plug Assembly

123028440
JJ54399: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-12-304-4369
Double Angle Bracket

123044369
537161-2013.000: RNCC: 3 | RNVC: 2
021.451557: RNCC: 5 | RNVC: 2
537161-2013.000: RNCC: 5 | RNVC: 9

17 Jul 1985

5340-12-324-3686
Electrical-Mechanical Equipment Post

123243686
TA-E60141-290483: RNCC: 3 | RNVC: 2

8 Feb 1991

5340-12-190-6841
Electrical-Mechanical Equipment Post

121906841
VG95148C5XM2X24-ST: RNCC: 2 | RNVC: 2
VG95148C5XM2X24-ST: RNCC: 3 | RNVC: 2
035 6122 137163: RNCC: 5 | RNVC: 9
0356122137163: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-12-185-2419
Manual Control Handle

121852419
06430-4123X35: RNCC: 3 | RNVC: 2
NLM643-4123X35: RNCC: 5 | RNVC: 9
NLM643-412X35MM: RNCC: 5 | RNVC: 9
NLM6430-4123X35: RNCC: 5 | RNVC: 9

23 Sep 1980

5340-12-394-6129
Dust And Moisture Seal Boot

123946129
BN1-12/405: RNCC: 3 | RNVC: 2
062-004B1POS405: RNCC: 5 | RNVC: 1

18 Dec 2013

5340-12-198-8473
Double Angle Bracket

121988473
NO PRIMARY REF 12-198-8473: RNCC: 3 | RNVC: 2
C61035-A52-C2: RNCC: 5 | RNVC: 9
B65695-A2000-X: RNCC: 5 | RNVC: 9
C61035A52C2: RNCC: 5 | RNVC: 9

3 Mar 1984

5340-12-390-5152
Mechanical Stop

123905152
00166-336-008: RNCC: 3 | RNVC: 2

19 Nov 2012

5340-12-336-0430
Mending Plate

123360430
160-89028-03: RNCC: 3 | RNVC: 2
160-89028-03: RNCC: 5 | RNVC: 9

14 Oct 1994

5340-12-340-8188
Double Angle Bracket

123408188
23-120-JN-57: RNCC: 3 | RNVC: 2

19 Jun 1996

5340-12-189-4628
Dust And Moisture Seal Protective Cap

121894628
IK66 SPEZIAL: RNCC: 3 | RNVC: 2
IK66: RNCC: 5 | RNVC: 2
6L.3871.017.00-157380: RNCC: 5 | RNVC: 2
6L.3871.017.00-A001: RNCC: 5 | RNVC: 2
6L.3871.017.157380: RNCC: 5 | RNVC: 2
6L3871-017-157380: RNCC: 5 | RNVC: 2
352250023022: RNCC: 5 | RNVC: 2
1K66 SPEZIAL: RNCC: 5 | RNVC: 9

29 Sep 1981

5340-12-319-3166
Catch Strike

123193166
V917L11-1-1AG: RNCC: 3 | RNVC: 2
V917 L11-1-1AG: RNCC: 5 | RNVC: 2
V917L11-1-1AG: RNCC: 5 | RNVC: 2
V917L11-1-1AG: RNCC: 5 | RNVC: 2

22 Sep 1989

5340-12-346-5332
Access Cover

123465332
GR4016E007: RNCC: 3 | RNVC: 9

6 Aug 1998

5340-12-308-0648
Angle Bracket

123080648
476.090/3: RNCC: 3 | RNVC: 2

27 Aug 1986

5340-12-193-8519
Butt Hinge

121938519
4-109154: RNCC: 3 | RNVC: 2

7 Sep 1982

5340-12-311-0892
Pipe Bracket

123110892
Z1 D 133: RNCC: 3 | RNVC: 2

24 Jul 1987

5340-12-360-4791
Mounting Plate

123604791
82050121: RNCC: 3 | RNVC: 2
82050121: RNCC: 5 | RNVC: 2

23 May 2003

5340-12-355-9571
Casement Fastener

123559571
0008510166: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-12-304-4513
Angle Bracket

123044513
5801433-070700.01.0: RNCC: 2 | RNVC: 2
5801433-070700.01.0: RNCC: 3 | RNVC: 2

18 Jul 1985

5340-12-192-8748
Angle Bracket

121928748
F01-212330.08.0: RNCC: 3 | RNVC: 2
F01-212330-08-0: RNCC: 5 | RNVC: 2

1 Jun 1982

5340-12-305-0571
Angle Bracket

123050571
A-296713-415: RNCC: 3 | RNVC: 2
A296713-415: RNCC: 5 | RNVC: 2

23 Sep 1985

5340-12-184-3591
Rigid Caster

121843591
5801357-1850-02: RNCC: 2 | RNVC: 2
5801357-1850-02: RNCC: 5 | RNVC: 2
5801357-1850-02: RNCC: 5 | RNVC: 2

19 Jul 1980

5340-12-394-2449
Access Cover

123942449
11.44051-0010: RNCC: 3 | RNVC: 2
11.44051-0010: RNCC: 5 | RNVC: 2

14 Nov 2013

5340-12-329-2783
Electrical-Mechanical Equipment Post

123292783
2653-330200.03: RNCC: 2 | RNVC: 2
2653-330200.03: RNCC: 3 | RNVC: 2

31 Jul 1992

5340-12-379-3925
Locking Stay

123793925
518555: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-12-199-1621
Plain Solid Disk

121991621
6006 300 192: RNCC: 3 | RNVC: 2
6006300192: RNCC: 5 | RNVC: 9

30 Mar 1984

5340-12-349-8863
Double Angle Bracket

123498863
A1Z10282834: RNCC: 2 | RNVC: 2
A1Z10282834: RNCC: 3 | RNVC: 2
20360336: RNCC: 5 | RNVC: 2

20 Jan 2000

5340-12-316-2907
Mending Plate

123162907
6381484: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-378-8363
Locking Stay

123788363
5720: RNCC: 3 | RNVC: 2
103176: RNCC: 5 | RNVC: 2

18 May 2009

5340-12-374-3882
Mounting Plate

123743882
4052920245: RNCC: 3 | RNVC: 2

13 Feb 2008

5340-12-359-9698
Mounting Bracket

123599698
9412851340: RNCC: 3 | RNVC: 2

25 Mar 2003

5340-12-189-5111
Lock-Release Lever

121895111
T40428: RNCC: 3 | RNVC: 2
T40428: RNCC: 5 | RNVC: 9

1 Oct 1981

5340-12-349-8852
Mounting Bracket

123498852
54.2551.474.00: RNCC: 2 | RNVC: 2
54.2551.474.00: RNCC: 3 | RNVC: 2

20 Jan 2000

5340-12-302-6870
Rod End Connector

123026870
1058491: RNCC: 3 | RNVC: 2
058491: RNCC: 5 | RNVC: 9

23 Jan 1985

5340-12-301-5757
Manual Control Handle

123015757
4178875: RNCC: 3 | RNVC: 2

25 Oct 1984

5340-12-323-2378
Retaining Strap

123232378
2188102: RNCC: 3 | RNVC: 2

6 Nov 1990

5340-12-350-9533
Mounting Bracket

123509533
4.672-027: RNCC: 3 | RNVC: 2

9 Jun 2000

5340-12-321-5618
Mounting Plate

123215618
P-886701-007: RNCC: 3 | RNVC: 2
P886701-007: RNCC: 5 | RNVC: 2

1 Jun 1990

5340-12-303-0328
Bow Handle

123030328
8782025006: RNCC: 3 | RNVC: 9

21 Feb 1985

5340-12-094-4070

5340-12-025-7970

5340-12-361-4931
Multiple Angle Bracket

123614931
1504890: RNCC: 3 | RNVC: 2

8 Oct 2003

5340-12-337-1841
Mounting Bracket

123371841
11.49052-0070: RNCC: 3 | RNVC: 2
030.123: RNCC: 5 | RNVC: 2
D11.49052-0070: RNCC: 5 | RNVC: 2

30 Jan 1995

5340-12-359-4343
Loop Clamp

123594343
DIN3016-1-E1-38X15-W1-2-NBR: RNCC: 2 | RNVC: 2

5 Feb 2003

5340-12-311-3654
Mending Plate

123113654
P-230234-009: RNCC: 3 | RNVC: 2
P230234-009: RNCC: 5 | RNVC: 2

24 Aug 1987

5340-12-310-9158
Resilient Mount

123109158
700021202465: RNCC: 3 | RNVC: 2
7701349567: RNCC: 5 | RNVC: 2

8 Jul 1987

5340-12-187-5640
Angle Bracket

121875640
02469434: RNCC: 3 | RNVC: 2
2469434ED5022-71: RNCC: 5 | RNVC: 2

15 Apr 1981

5340-12-092-0966

5340-12-311-6248
Angle Bracket

123116248
M533172: RNCC: 3 | RNVC: 9
M533172: RNCC: 5 | RNVC: 2

29 Sep 1987

5340-12-190-8692
Detent Plunger

121908692
K2060: RNCC: 3 | RNVC: 2
0002950374: RNCC: 5 | RNVC: 2

17 Dec 1981

5340-12-092-0378

5340-12-316-1990
Lock-Release Lever

123161990
4900286-201130.00: RNCC: 2 | RNVC: 2
4900286-201130.00: RNCC: 3 | RNVC: 2

30 Dec 1988

5340-12-327-1157
Retaining Strap

123271157
22160 105: RNCC: 3 | RNVC: 2
A2 031-138: RNCC: 5 | RNVC: 2
22160 105: RNCC: 5 | RNVC: 9
A2 031-138: RNCC: 5 | RNVC: 9

3 Dec 1991

5340-12-321-4441
Angle Bracket

123214441
822366-4000: RNCC: 3 | RNVC: 2

21 May 1990

5340-12-310-1748
Ball Socket Seat

123101748
DIN71805-B13-ZNPHG3F: RNCC: 2 | RNVC: 2
DIN71805-B13-ZNPHG3F: RNCC: 3 | RNVC: 2
071805013202: RNCC: 5 | RNVC: 2

14 Apr 1987

5340-12-325-7139
Angle Bracket

123257139
5803544-201400.01: RNCC: 2 | RNVC: 2
5803544-201400.01: RNCC: 3 | RNVC: 2

2 Jul 1991

5340-12-313-6294
Extension Drawer Slide

123136294
GC302-356LH: RNCC: 3 | RNVC: 2

21 Apr 1988

5340-12-368-4930
Mounting Bracket

123684930
J92228328-001: RNCC: 3 | RNVC: 2

16 Mar 2006

5340-12-333-7904
Angle Bracket

123337904
6100129-170000.001: RNCC: 2 | RNVC: 2
3780118: RNCC: 3 | RNVC: 2
3780118ED3480-44: RNCC: 5 | RNVC: 2

8 Feb 1994

5340-12-331-7149
Spacing Threaded Standoff

123317149
VG95148B4XM2,5X10-ST: RNCC: 2 | RNVC: 2
VG95148B4XM2,5X10-ST: RNCC: 3 | RNVC: 2
18H252: RNCC: 5 | RNVC: 2

14 Jun 1993

5340-12-333-7935
Angle Bracket

123337935
C230ZZ13102-000: RNCC: 3 | RNVC: 2

8 Feb 1994

5340-12-388-7755
Angle Bracket

123887755
601243-201900.03: RNCC: 2 | RNVC: 2
601243-201900.03: RNCC: 3 | RNVC: 2

20 Apr 2012

5340-12-701-9034
Loop Clamp

127019034
VG95211-ML-127019034: RNCC: 2 | RNVC: 2
N1119-68: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-341-5648
Webbing Strap

123415648
2300088-104178.00: RNCC: 2 | RNVC: 2
9864196: RNCC: 3 | RNVC: 2
2300088-104178.00: RNCC: 5 | RNVC: 2
2300088-104178.00: RNCC: 5 | RNVC: 9
9864196: RNCC: 5 | RNVC: 9
000-B2-25X2X650-PE-RAL6031: RNCC: 6 | RNVC: 9

21 Sep 1996

5340-12-305-0060
Angle Bracket

123050060
0214 9695: RNCC: 3 | RNVC: 2
02149695KZ0148-16: RNCC: 5 | RNVC: 2

17 Sep 1985

5340-12-319-6563
Access Door

123196563
504191: RNCC: 3 | RNVC: 2
504191: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-12-349-9091
Mounting Bracket

123499091
A1Z10283587: RNCC: 2 | RNVC: 2
A1Z10283587: RNCC: 3 | RNVC: 2
20361171: RNCC: 5 | RNVC: 2

24 Jan 2000

5340-12-186-1290
Access Cover

121861290
431271109241: RNCC: 3 | RNVC: 2

29 Nov 1980

5340-12-312-6980
Dust And Moisture Seal Protective Cap

123126980
5025: RNCC: 3 | RNVC: 2

28 Jan 1988

5340-12-383-0110
Webbing Strap

123830110
9219961: RNCC: 3 | RNVC: 2

2 Sep 2010

5340-12-357-2689
Manual Control Lever

123572689
8811400232: RNCC: 2 | RNVC: 2
8811400232: RNCC: 3 | RNVC: 2

28 May 2002

5340-12-311-8433
Access Cover

123118433
2300074-3005.01: RNCC: 2 | RNVC: 2
2300074-3005.01: RNCC: 3 | RNVC: 2
2300074-3005.01: RNCC: 5 | RNVC: 9

22 Oct 1987

5340-12-359-2982
Spacing Threaded Standoff

123592982
423 072 0424: RNCC: 3 | RNVC: 2

21 Jan 2003

5340-12-044-5186

5340-12-362-8714
Multiple Angle Bracket

123628714
S533M5003233: RNCC: 3 | RNVC: 2

8 Apr 2004

5340-12-319-2697
Access Cover

123192697
1840475-0000.01: RNCC: 3 | RNVC: 2

18 Sep 1989

5340-12-184-5196
Nonmetallic Bumper

121845196
5801339-02018: RNCC: 3 | RNVC: 2

29 Jul 1980

5340-12-316-5117
Nonmetallic Bumper

123165117
6387948: RNCC: 3 | RNVC: 2
845-6387948: RNCC: 5 | RNVC: 2

23 Jan 1989

5340-12-177-1419
Clamping Catch

121771419
2300002-031620.000: RNCC: 2 | RNVC: 2
2300002-031620.000: RNCC: 3 | RNVC: 2
2300002-031620: RNCC: 5 | RNVC: 9

17 Jan 1979

5340-12-177-9486
Support Hook

121779486
2300002-181860.001: RNCC: 2 | RNVC: 2
2300002-181860.001: RNCC: 3 | RNVC: 2
2300002-181860-001: RNCC: 5 | RNVC: 9
2300002-181860.001: RNCC: 5 | RNVC: 9

9 Mar 1979

5340-12-322-8473
Metallic Bumper

123228473
5200.230.062.000: RNCC: 3 | RNVC: 9
5200.230.062.000: RNCC: 5 | RNVC: 2
192-3-000135: RNCC: 5 | RNVC: 2
0525398: RNCC: 5 | RNVC: 2
5200.230.062.000.3: RNCC: 5 | RNVC: 9
52002300620003: RNCC: 5 | RNVC: 9

28 Sep 1990

5340-12-324-0331
Angle Bracket

123240331
66.3579.318.02-A001: RNCC: 3 | RNVC: 2
66.3579.318.02: RNCC: 5 | RNVC: 2

17 Jan 1991

5340-12-386-4692
Access Cover

123864692
V6520-03071-105: RNCC: 3 | RNVC: 2

5 Sep 2011

5340-12-318-7646
Mending Plate

123187646
704-126100-913-0: RNCC: 3 | RNVC: 2

15 Aug 1989

5340-12-341-0650
Mounting Bracket

123410650
SK475-183610.000.0: RNCC: 3 | RNVC: 2
1590177: RNCC: 5 | RNVC: 2

24 Jul 1996

5340-12-702-4185
Angle Bracket

127024185
VG95211-ML-127024185: RNCC: 2 | RNVC: 2
5.12.7060.1450.12: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-352-1043
Mounting Bracket

123521043
2500238-040119.000.0: RNCC: 2 | RNVC: 2
2500238-040119.000.0: RNCC: 3 | RNVC: 2

17 Oct 2000

5340-12-342-6010
Angle Bracket

123426010
0001-000000-918-0: RNCC: 2 | RNVC: 2
0001-000000-918-0: RNCC: 3 | RNVC: 2
0001-000000-918-0: RNCC: 5 | RNVC: 9

6 Mar 1997

5340-12-365-0624
Retaining Strap

123650624
6119950065: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-12-023-0360

5340-12-314-4487
Rod End Clevis

123144487
SK401-000017.000.0: RNCC: 3 | RNVC: 2
SK401-000017.000.0: RNCC: 5 | RNVC: 9

7 Jul 1988

5340-12-306-0941
Dust And Moisture Seal Protective Cap

123060941
BP17: RNCC: 3 | RNVC: 2
FG797-17-0800: RNCC: 5 | RNVC: 2

27 Jan 1986

5340-12-167-3432
Resilient Mount

121673432
DIN95363-E10X10-NR40ST: RNCC: 2 | RNVC: 2
515001-M4X10.NR40.ST: RNCC: 5 | RNVC: 2
5L.6671.003.18: RNCC: 5 | RNVC: 2
5L6671-003-18: RNCC: 5 | RNVC: 2
BB2-43-24N: RNCC: 5 | RNVC: 9
VG95363-E10X10-NR40ST: RNCC: 5 | RNVC: 9

14 Dec 1976

5340-12-325-8854
Webbing Strap

123258854
79017/026-1300-0200: RNCC: 3 | RNVC: 2
79017/026-1300-0200: RNCC: 5 | RNVC: 9
79017/026-1300-200: RNCC: 5 | RNVC: 9

18 Jul 1991

5340-12-004-2315

5340-12-004-3809

5340-12-004-3735

5340-12-352-4317
Nonmetallic Bumper

123524317
P70157102204: RNCC: 3 | RNVC: 2

20 Nov 2000

5340-12-369-3454
Mechanical Stop

123693454
201594709: RNCC: 3 | RNVC: 2

23 Jun 2006

5340-12-352-2824
Blank Panel

123522824
6278101: RNCC: 3 | RNVC: 2

3 Nov 2000

5340-12-339-4923
Angle Bracket

123394923
88974800343: RNCC: 3 | RNVC: 2
88.97480.0343: RNCC: 5 | RNVC: 2

28 Nov 1995

5340-12-363-3627
Mounting Plate

123633627
G10-79-820-07-0: RNCC: 3 | RNVC: 2

3 Jun 2004

5340-12-702-0180
Mounting Plate

127020180
VG95211-ML-127020180: RNCC: 2 | RNVC: 2
2.12.6100.8023.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-332-3940
Friction Catch

123323940
AFG-06-89-00-00-00: RNCC: 3 | RNVC: 2
AFG006836: RNCC: 5 | RNVC: 2
85-694-8426: RNCC: 6 | RNVC: 9

5 Aug 1993

5340-12-155-5497
Rod End Clevis

121555497
160-71680-01: RNCC: 3 | RNVC: 2
160-71680-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-184-8480
Expansion Plug

121848480
DIN443-24-ST-PHR: RNCC: 2 | RNVC: 2
000443024000: RNCC: 5 | RNVC: 2
24DIN443PHR: RNCC: 5 | RNVC: 2

23 Aug 1980

5340-12-182-4619
Resilient Mount

121824619
DIN95363-A50X30-NR40ST: RNCC: 2 | RNVC: 2
500042-M10X25.NR40.ST: RNCC: 5 | RNVC: 2
05485-9020: RNCC: 5 | RNVC: 2
VG95363-A50X30-NR40ST: RNCC: 5 | RNVC: 9

4 Feb 1980

5340-12-319-1235
Webbing Strap

123191235
1386: RNCC: 3 | RNVC: 2
1186: RNCC: 5 | RNVC: 2
S 53-9000: RNCC: 5 | RNVC: 2
S53-9000: RNCC: 5 | RNVC: 2

8 Sep 1989

5340-12-307-9338
Resilient Mount Adapter

123079338
00584-10880-10-001: RNCC: 3 | RNVC: 2

12 Aug 1986

5340-12-323-5396
Retaining Strap

123235396
54.3050.000.14: RNCC: 2 | RNVC: 2
DIN72573-4X15-ALMGSI1F21-LACK-F9: RNCC: 2 | RNVC: 2
54.3050.000.14: RNCC: 3 | RNVC: 2

5 Dec 1990

5340-12-177-9492
Dust And Moisture Seal Protective Cap

121779492
PAN3861-04: RNCC: 3 | RNVC: 2

9 Mar 1979

5340-12-199-8159
Angle Bracket

121998159
0289 0626: RNCC: 3 | RNVC: 2
2890626ED0693-79: RNCC: 5 | RNVC: 2
2890626: RNCC: 5 | RNVC: 2

2 Jun 1984

5340-12-302-1369
Nonmetallic Bumper

123021369
4178853: RNCC: 3 | RNVC: 2
S12B.F01.07.00.004: RNCC: 5 | RNVC: 2

6 Dec 1984

5340-12-387-6968
Electronic Equipment Hardware Kit

123876968
83094828: RNCC: 3 | RNVC: 2

25 Jan 2012

5340-12-026-7130

5340-12-348-6695
Mechanical Stop

123486695
1021101: RNCC: 3 | RNVC: 2

3 Aug 1999

5340-12-311-7185
Mending Plate

123117185
4642 330 009: RNCC: 3 | RNVC: 2
4642330009: RNCC: 5 | RNVC: 9

9 Oct 1987

5340-12-362-1566
Dust And Moisture Seal Protective Plug

123621566
735084036000: RNCC: 3 | RNVC: 2

16 Jan 2004

5340-12-315-7932
Angle Bracket

123157932
51094400002: RNCC: 3 | RNVC: 2
51.09440-0002: RNCC: 5 | RNVC: 2

26 Nov 1988

5340-12-356-1234
Mounting Bracket

123561234
2339-080011A00C: RNCC: 3 | RNVC: 2

24 Jan 2002

5340-12-381-2955
Mounting Plate

123812955
424-04-IBU2: RNCC: 3 | RNVC: 2
4250473100493: RNCC: 5 | RNVC: 2

29 Jan 2010

5340-12-178-2969
Nonmetallic Bumper

121782969
81960200244: RNCC: 3 | RNVC: 2
81.96020-0244: RNCC: 5 | RNVC: 2
845-81.96020.0244: RNCC: 5 | RNVC: 2
57418090142: RNCC: 5 | RNVC: 2
741809S1: RNCC: 5 | RNVC: 2
741809S1MITTEL: RNCC: 5 | RNVC: 2

12 Apr 1979

5340-12-152-1080
Riegel

121521080
6100008-75.06: RNCC: 2 | RNVC: 2
6100008-75.06: RNCC: 3 | RNVC: 2
6100008-75-06: RNCC: 5 | RNVC: 2
6100008-75-06: RNCC: 5 | RNVC: 9
6100008-75.06: RNCC: 5 | RNVC: 9
6100008-75-06: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-390-6357
Mounting Bracket

123906357
314245: RNCC: 3 | RNVC: 2
2170-07-55-00/37: RNCC: 5 | RNVC: 2

29 Nov 2012

5340-12-333-8703
Mounting Plate

123338703
405-8-2-2: RNCC: 3 | RNVC: 2
405-8.2.2: RNCC: 5 | RNVC: 2

18 Feb 1994

5340-12-367-3446
Mounting Plate

123673446
5161-370100A01B: RNCC: 2 | RNVC: 2
5161-370100A01B: RNCC: 3 | RNVC: 2

9 Aug 2005

Load More Results