What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 118 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 118 of 178

5340-12-316-6621
Retaining Strap

123166621
51974010483: RNCC: 3 | RNVC: 2
51974010483: RNCC: 3 | RNVC: 2
51.97401-0483: RNCC: 5 | RNVC: 2
51.97401-0483: RNCC: 5 | RNVC: 2

31 Jan 1989

5340-12-158-4276
Retaining Strap

121584276
21.3129.2002: RNCC: 3 | RNVC: 9
21-3129-2002: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-389-1606
Loop Clamp

123891606
DIN3016-1-D1-75X25-W1-2-NBR: RNCC: 2 | RNVC: 2

31 May 2012

5340-12-154-8416
Loop Clamp

121548416
51.2404.075-20: RNCC: 3 | RNVC: 2
51-2404-075-20: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-308-9027
Electrical-Mechanical Equipment Post

123089027
KM.S01-210100.020: RNCC: 3 | RNVC: 2

27 Nov 1986

5340-12-388-7831
Recess Handle

123887831
213-0705.51: RNCC: 3 | RNVC: 2

23 Apr 2012

5340-12-343-6515
Loop Clamp

123436515
0117 8526: RNCC: 3 | RNVC: 2
01178526ES8932-20: RNCC: 5 | RNVC: 2
H3220-G1X6: RNCC: 5 | RNVC: 2

10 Jul 1997

5340-12-194-1681
Butt Hinge Leaf

121941681
23114-0480.04: RNCC: 2 | RNVC: 2
23114-0480.04: RNCC: 3 | RNVC: 2
23114-0480.04: RNCC: 5 | RNVC: 9
23114-0480-04: RNCC: 5 | RNVC: 9
23114-0480.04: RNCC: 5 | RNVC: 9
23114-0480-04: RNCC: 5 | RNVC: 9

7 Oct 1982

5340-12-701-3968
Mounting Bracket

127013968
VG95211-ML-127013968: RNCC: 2 | RNVC: 2
5.12.5311.2950.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-351-2167
Mechanical Stop

123512167
3099-00-111000.14: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-12-373-8786
Mounting Plate

123738786
84187/1600-01: RNCC: 3 | RNVC: 2
84187160001: RNCC: 5 | RNVC: 2

14 Dec 2007

5340-12-361-6810
Mounting Bracket

123616810
300.038.626: RNCC: 2 | RNVC: 2
300.038.626: RNCC: 3 | RNVC: 2
012619-345-14: RNCC: 5 | RNVC: 9

3 Nov 2003

5340-12-313-3775
Access Cover

123133775
1702000516: RNCC: 3 | RNVC: 2
134/2175-12-00-07: RNCC: 5 | RNVC: 2
3100/2175-12-00-07: RNCC: 5 | RNVC: 9

26 Mar 1988

5340-12-374-5883
Double Angle Bracket

123745883
3539222-001: RNCC: 3 | RNVC: 2
3539222-001: RNCC: 5 | RNVC: 2

27 Feb 2008

5340-12-353-1824
Mounting Bracket

123531824
2500238-041018.000.0: RNCC: 2 | RNVC: 2
2500238-041018.000.0: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-12-167-2174
Handwheel

121672174
20-7290-020: RNCC: 3 | RNVC: 2
000969-4982-0002-0006-0B: RNCC: 5 | RNVC: 9

1 Dec 1976

5340-12-178-9509
Retaining Strap

121789509
1264-3202-202: RNCC: 3 | RNVC: 2
1264-3202-202: RNCC: 5 | RNVC: 9

28 May 1979

5340-12-343-6692
Double Angle Bracket

123436692
2300002-041180.005: RNCC: 2 | RNVC: 2
9908400: RNCC: 3 | RNVC: 2
2300002-041180.005: RNCC: 5 | RNVC: 2
2300002-041180.005: RNCC: 5 | RNVC: 9
9908400: RNCC: 5 | RNVC: 9

14 Jul 1997

5340-12-344-2194
Mounting Bracket

123442194
1216 3361: RNCC: 3 | RNVC: 2
6.234.0.653.003.4: RNCC: 5 | RNVC: 9

1 Oct 1997

5340-12-345-8843
Access Cover

123458843
4172-464: RNCC: 3 | RNVC: 2
4172464: RNCC: 5 | RNVC: 2

12 May 1998

5340-12-185-0494
Loop Clamp

121850494
LN9490BK12: RNCC: 2 | RNVC: 2
LN9490BR12: RNCC: 5 | RNVC: 2

6 Sep 1980

5340-12-318-0975
Angle Bracket

123180975
140-115000-000-0: RNCC: 3 | RNVC: 2
066758-625: RNCC: 5 | RNVC: 2

12 Jun 1989

5340-12-359-8329
Mounting Plate

123598329
2500261-183540.001.0: RNCC: 2 | RNVC: 2
2500261-183540.001.0: RNCC: 3 | RNVC: 2

13 Mar 2003

5340-12-701-5759
Retaining Strap

127015759
VG95211-ML-127015759: RNCC: 2 | RNVC: 2
5.12.6402.8000.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-184-8196
Electrical-Mechanical Equipment Post

121848196
VG95148C8XM5X104-NRST: RNCC: 2 | RNVC: 2
CF429252A: RNCC: 3 | RNVC: 2
VG95148C8XM5X104-NRST: RNCC: 3 | RNVC: 2
CF429252A: RNCC: 3 | RNVC: 2
CF 429 252 A: RNCC: 5 | RNVC: 2
CF 429 252 A: RNCC: 5 | RNVC: 2

21 Aug 1980

5340-12-393-0127
Mounting Bracket

123930127
1030105-060010.000.0: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-12-702-4285
Mounting Bracket

127024285
VG95211-ML-127024285: RNCC: 2 | RNVC: 2
5.12.7904.0510.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-307-9370
Strap Fastener Loop

123079370
1600012-230: RNCC: 3 | RNVC: 2

12 Aug 1986

5340-12-389-1333
Expansion Shield

123891333
061040: RNCC: 3 | RNVC: 2

30 May 2012

5340-12-389-0966
Mounting Bracket

123890966
2425703007: RNCC: 3 | RNVC: 2

25 May 2012

5340-12-349-1901
Metal Grille

123491901
88521 15479: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-12-365-1303
Mounting Plate

123651303
536519-0844.000: RNCC: 3 | RNVC: 2

1 Dec 2004

5340-12-313-6952
Elastic Cord Assembly

123136952
VF4184-00600-043: RNCC: 3 | RNVC: 2
VF4184-00600-043: RNCC: 5 | RNVC: 2

27 Apr 1988

5340-12-316-6620
Loop Clamp

123166620
51974010040: RNCC: 3 | RNVC: 2
51974010040: RNCC: 3 | RNVC: 2
51.97401-0040: RNCC: 5 | RNVC: 2
51.97401-0040: RNCC: 5 | RNVC: 2

31 Jan 1989

5340-12-192-1184
Angle Bracket

121921184
4707650: RNCC: 3 | RNVC: 2
470.7650: RNCC: 5 | RNVC: 2
5801602-010100-009: RNCC: 5 | RNVC: 9

24 Mar 1982

5340-12-338-2632
Mounting Bracket

123382632
463-151312.000: RNCC: 3 | RNVC: 9

13 Jun 1995

5340-12-338-8873
Mending Plate

123388873
4900319-303100.01: RNCC: 2 | RNVC: 2
4900319-303100.01: RNCC: 3 | RNVC: 2

5 Sep 1995

5340-12-362-7480
Manual Control Lever

123627480
160-24405-01: RNCC: 3 | RNVC: 2

26 Mar 2004

5340-12-150-5172
Resilient Mount

121505172
8382231012: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-356-7252
Multiple Angle Bracket

123567252
7766022: RNCC: 2 | RNVC: 2
7766022: RNCC: 3 | RNVC: 2
99707766022: RNCC: 5 | RNVC: 9

27 Mar 2002

5340-12-304-9735
Spring Tension Clip

123049735
3098901110: RNCC: 3 | RNVC: 2

12 Sep 1985

5340-12-125-5383

5340-12-186-0045
Magnetic Catch

121860045
8794542001: RNCC: 3 | RNVC: 2
8794542001: RNCC: 3 | RNVC: 9

18 Nov 1980

5340-12-305-5158
Mending Plate

123055158
2500121-310000.05: RNCC: 2 | RNVC: 2
2500121-310000.05: RNCC: 3 | RNVC: 2

15 Nov 1985

5340-12-338-1272
Double Angle Bracket

123381272
70905-760: RNCC: 3 | RNVC: 2

26 May 1995

5340-12-308-3217
Nonmetallic Bumper

123083217
272.324.433: RNCC: 3 | RNVC: 2
272.324 433: RNCC: 5 | RNVC: 9

25 Sep 1986

5340-12-362-3837
Lock Bolt

123623837
2500261-993130.002.0: RNCC: 2 | RNVC: 2
2500261-993130.002.0: RNCC: 3 | RNVC: 2

16 Feb 2004

5340-12-332-4319
Mending Plate

123324319
0851 7753.077: RNCC: 3 | RNVC: 2
0851 7564.092: RNCC: 5 | RNVC: 2
8517564FA T.92: RNCC: 5 | RNVC: 9
8517753FA T.77: RNCC: 5 | RNVC: 9

10 Aug 1993

5340-12-308-0344
Angle Bracket

123080344
4021.3906.3: RNCC: 3 | RNVC: 2

22 Aug 1986

5340-12-192-9803
Angle Bracket

121929803
4617900113: RNCC: 3 | RNVC: 2
726 1 75 189 2: RNCC: 5 | RNVC: 9

9 Jun 1982

5340-12-194-6537
Spring Loaded Cylinder Fastener

121946537
1695851: RNCC: 3 | RNVC: 2
75E10.35.2: RNCC: 5 | RNVC: 2

25 Nov 1982

5340-12-349-1967
Door Holder

123491967
DIN81409-B-MS-M: RNCC: 2 | RNVC: 2

6 Oct 1999

5340-12-350-8576
Angle Bracket

123508576
J92228169-002: RNCC: 3 | RNVC: 2

30 May 2000

5340-12-199-4196
Clamp Bolt Assembly

121994196
2300088-511102.00: RNCC: 2 | RNVC: 2
2300088-511102-00: RNCC: 5 | RNVC: 9

20 Apr 1984

5340-12-302-2766
Handwheel

123022766
DIN950-A4-160X16-AL: RNCC: 2 | RNVC: 2
DIN950-A4-160X16-AL: RNCC: 3 | RNVC: 2
A4-160X16DIN950AL: RNCC: 5 | RNVC: 2

13 Dec 1984

5340-12-167-1514
Spring Tension Clip

121671514
204-060-628-5001: RNCC: 3 | RNVC: 2

25 Nov 1976

5340-12-310-7797
Mending Plate

123107797
2300033-540100.13: RNCC: 2 | RNVC: 2
2300033-540100.13: RNCC: 5 | RNVC: 9
2300033-540100-13: RNCC: 5 | RNVC: 9

30 Jun 1987

5340-12-369-3372
Mounting Bracket

123693372
NO PRIMARY REF 12-369-3372: RNCC: 3 | RNVC: 2
7084133: RNCC: 5 | RNVC: 2

22 Jun 2006

5340-12-329-2555
Angle Bracket

123292555
M546267: RNCC: 3 | RNVC: 9

29 Jul 1992

5340-12-315-2528
Door Handle

123152528
3817661001: RNCC: 3 | RNVC: 2
381 766 10 01: RNCC: 5 | RNVC: 2

6 Oct 1988

5340-12-308-0228
Clamping Catch

123080228
203C: RNCC: 3 | RNVC: 2
203C: RNCC: 5 | RNVC: 2
0051.1050.1: RNCC: 5 | RNVC: 2
203C: RNCC: 5 | RNVC: 2

21 Aug 1986

5340-12-365-3726
Double Angle Bracket

123653726
2300109-970487.001.0: RNCC: 3 | RNVC: 2

23 Dec 2004

5340-12-381-5231
Dust And Moisture Seal Protective Cap-Plug

123815231
610U35RAL3000: RNCC: 3 | RNVC: 2
610 U 35 ROUGE: RNCC: 5 | RNVC: 2
GPN610U35RAL3000: RNCC: 5 | RNVC: 9

26 Feb 2010

5340-12-366-0129
Mounting Bracket

123660129
9436101136: RNCC: 3 | RNVC: 2

28 Feb 2005

5340-12-323-2641
Mounting Bracket

123232641
6031860195: RNCC: 3 | RNVC: 2

8 Nov 1990

5340-12-351-3390
Mounting Bracket

123513390
10019891: RNCC: 3 | RNVC: 2

17 Jul 2000

5340-12-199-6975
Rod End Clevis

121996975
5564474/3: RNCC: 3 | RNVC: 2

24 May 1984

5340-12-026-9926

5340-12-317-2930
Catch Strike

123172930
6000511: RNCC: 3 | RNVC: 2
2602-155: RNCC: 5 | RNVC: 2
2602155: RNCC: 5 | RNVC: 2
600K0571-002-00: RNCC: 5 | RNVC: 2
600K0571-002-00.3: RNCC: 5 | RNVC: 2
051223501: RNCC: 5 | RNVC: 2

28 Mar 1989

5340-12-181-3017
Double Angle Bracket

121813017
23176-262140.02.0: RNCC: 2 | RNVC: 2
23176-262140-02-0: RNCC: 5 | RNVC: 2
23176-262140-02-0: RNCC: 5 | RNVC: 9

12 Nov 1979

5340-12-174-2476
Loop Clamp

121742476
DIN3016-1-E2-15-15X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-E2-15-15X15-W1-2: RNCC: 3 | RNVC: 2
RSGU0.2X15/15: RNCC: 3 | RNVC: 2
RSGU2X15-15: RNCC: 5 | RNVC: 2
RSGU2X15/15: RNCC: 5 | RNVC: 2
4209215015: RNCC: 5 | RNVC: 2
DIN3016-E2-15-15X15-W1-2: RNCC: 5 | RNVC: 9

19 Jun 1978

5340-12-353-5236
Access Cover

123535236
2500238-042440.000.0: RNCC: 2 | RNVC: 2
2500238-042440.000.0: RNCC: 3 | RNVC: 2

4 Apr 2001

5340-12-701-7643
Mounting Plate

127017643
VG95211-ML-127017643: RNCC: 2 | RNVC: 2
5.12.7701.8070.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-171-1881
Retaining Strap

121711881
06670630202: RNCC: 3 | RNVC: 2
06.67063.0202: RNCC: 5 | RNVC: 2
M7.750-60-2X8-6-A4C: RNCC: 5 | RNVC: 2

16 Sep 1977

5340-12-197-3606
Extension Drawer Slide Section

121973606
86-1559-201100.002.0: RNCC: 3 | RNVC: 2
86-1559-201100.002.0: RNCC: 5 | RNVC: 9

17 Oct 1983

5340-12-702-6536
Mounting Bracket

127026536
VG95211-ML-127026536: RNCC: 2 | RNVC: 2
N1129-13-1: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-336-0645
Webbing Strap

123360645
79057-1200-GB82517: RNCC: 3 | RNVC: 2
79057-1200-GB 82517: RNCC: 5 | RNVC: 2
DIN60060-1-25X1200-C3: RNCC: 5 | RNVC: 9

18 Oct 1994

5340-12-365-3332
Access Cover

123653332
2500075-199310.000.0: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-12-187-5838
Mending Plate

121875838
6.226.0.650.009.4: RNCC: 3 | RNVC: 2
6.226.0.650.009.4: RNCC: 5 | RNVC: 9
6-226-0-650-009-4: RNCC: 5 | RNVC: 9

15 Apr 1981

5340-12-318-0992
Double Angle Bracket

123180992
140-133300-912-0: RNCC: 3 | RNVC: 2
66859-760: RNCC: 5 | RNVC: 2

12 Jun 1989

5340-12-701-7623
Retaining Strap

127017623
VG95211-ML-127017623: RNCC: 2 | RNVC: 2
5.12.7701.2410.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-157-6429
Resilient Mount

121576429
DIN95363-A9X12-M4X12-NR40ST: RNCC: 2 | RNVC: 2
9X12NLU368-021STANDARD40SH0RE: RNCC: 5 | RNVC: 2
500005-M4X12.NR40.ST: RNCC: 5 | RNVC: 2
25317/A-BSTN4090: RNCC: 5 | RNVC: 2
25317SM400: RNCC: 5 | RNVC: 2
25317,NR40ST: RNCC: 5 | RNVC: 2
408914333: RNCC: 5 | RNVC: 2
25317BSTN4090: RNCC: 5 | RNVC: 2
25317VEN95: RNCC: 5 | RNVC: 9
VG95363-A9X12-M4X12-NR40ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-183-1677
Pipe Hanger Extension Bar

121831677
02480629: RNCC: 3 | RNVC: 2
2480629EE5082-81: RNCC: 5 | RNVC: 2

25 Mar 1980

5340-12-304-5280
Nonmetallic Bumper

123045280
1101860007: RNCC: 3 | RNVC: 2

26 Jul 1985

5340-12-378-1388
Swivel Caster

123781388
E00205315: RNCC: 3 | RNVC: 2

16 Mar 2009

5340-12-339-0507
Strap Fastener Loop

123390507
4618650278: RNCC: 3 | RNVC: 2

4 Oct 1995

5340-12-309-4657
Retaining Strap

123094657
620K0260: RNCC: 3 | RNVC: 2
0009952820: RNCC: 5 | RNVC: 2
620L841: RNCC: 5 | RNVC: 2

27 Jan 1987

5340-12-340-4459
Retaining Clip

123404459
771328: RNCC: 3 | RNVC: 2
77 1328 78: RNCC: 5 | RNVC: 2

16 Apr 1996

5340-12-392-2137
Mounting Bracket

123922137
DW 410 185 AE: RNCC: 3 | RNVC: 2
DW 410 185 AE: RNCC: 5 | RNVC: 2

16 May 2013

5340-12-141-4467
Federkraft- Klipp

5340-12-143-5462
Federkraft- Klipp

5340-12-145-9284

5340-12-141-5288
Blatt- Feder

5340-12-144-3022
Gewindeeinsatz

5340-12-141-7356
Druck- Manschette

5340-12-307-4318
Retaining Strap

123074318
0300-0524S: RNCC: 3 | RNVC: 2

18 Jun 1986

5340-12-122-2998
Nonmetallic Bumper

121222998
1203331965: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-391-0193
Expansion Plug

123910193
890.17.13: RNCC: 3 | RNVC: 2

15 Jan 2013

5340-12-382-6957
Butt Hinge

123826957
1811781: RNCC: 3 | RNVC: 2

27 Jul 2010

5340-12-302-0166
Lock-Release Lever

123020166
3818200714: RNCC: 3 | RNVC: 2

27 Nov 1984

5340-12-357-5258
Spring Tension Clip

123575258
06870: RNCC: 3 | RNVC: 2

28 Jun 2002

5340-12-027-0489

5340-12-137-6730
Padlock

121376730
TL5340-0020-120: RNCC: 2 | RNVC: 2
1960-65CM: RNCC: 3 | RNVC: 2
750-65CM: RNCC: 3 | RNVC: 2
1600: RNCC: 3 | RNVC: 2
TK-KG55-5340-482-120: RNCC: 5 | RNVC: 2
TL5340-0005-11: RNCC: 5 | RNVC: 2
TK5340-482-120: RNCC: 5 | RNVC: 2
5340-0005-11: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-162-6232
An Scharnierlappen

5340-12-169-4096
Schnapp Verschlusz

5340-12-166-6698
Elek Gewindezapfen

5340-12-341-2867
Access Door

123412867
VG95211-ML-123412867: RNCC: 2 | RNVC: 2
65209-03104B01: RNCC: 3 | RNVC: 2

20 Aug 1996

5340-12-700-8691
Loop Clamp

127008691
VG95211-ML-127008691: RNCC: 2 | RNVC: 2
155N464-4: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-3689
Mounting Plate

127013689
VG95211-ML-127013689: RNCC: 2 | RNVC: 2
5.12.5302.1722.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-700-8949
Loop Clamp

127008949
VG95211-ML-127008949: RNCC: 2 | RNVC: 2
2.11.0254.8160.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-320-1015
Access Cover

123201015
C145-A11-C33: RNCC: 3 | RNVC: 2

7 Dec 1989

5340-12-164-9578
Friction Catch Stud Receptacle

121649578
681-23000-07: RNCC: 3 | RNVC: 2
681-23000-07: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-310-1891
Flush Lock

123101891
05796092: RNCC: 3 | RNVC: 9
K796/092 SCHLOSZ: RNCC: 3 | RNVC: 9

15 Apr 1987

5340-12-353-4010
Webbing Strap

123534010
2300298-972005.000.0: RNCC: 2 | RNVC: 2
2300298-972005.000.0: RNCC: 3 | RNVC: 2

20 Mar 2001

5340-12-366-9147
Access Cover

123669147
2300399-977090.000.0: RNCC: 3 | RNVC: 2

21 Jun 2005

5340-12-356-1796
Runner

123561796
7787.004.9: RNCC: 3 | RNVC: 2
77870049: RNCC: 5 | RNVC: 2

30 Jan 2002

5340-12-197-9116
Angle Bracket

121979116
CF 325 698 A: RNCC: 3 | RNVC: 2
CF 325 698 A: RNCC: 5 | RNVC: 2
CF 325 698: RNCC: 5 | RNVC: 2
CF 325 698: RNCC: 5 | RNVC: 2

1 Dec 1983

5340-12-388-7349
Mounting Bracket

123887349
122W727000.008.0: RNCC: 2 | RNVC: 2
122W727000.008.0: RNCC: 3 | RNVC: 2

18 Apr 2012

5340-12-182-4780
Angle Bracket

121824780
CF 432 332 D: RNCC: 2 | RNVC: 2
CF 432 332 D: RNCC: 3 | RNVC: 2
CF 432 332 D: RNCC: 5 | RNVC: 2
CF432332D: RNCC: 5 | RNVC: 2
CF432332D: RNCC: 5 | RNVC: 2
CF 432 332 D: RNCC: 5 | RNVC: 2
CF432332D: RNCC: 5 | RNVC: 2

6 Feb 1980

5340-12-389-1751
Double Angle Bracket

123891751
R.MKA1.3620.01: RNCC: 2 | RNVC: 2
R.MKA1.3620.01: RNCC: 3 | RNVC: 2

31 May 2012

5340-12-386-1315
Access Cover

123861315
2500262-749200.001.0: RNCC: 2 | RNVC: 2
2500262-749200.001.0: RNCC: 3 | RNVC: 2

10 Aug 2011

5340-12-328-9729
Doorstop

123289729
CF22-1: RNCC: 3 | RNVC: 2

4 Jul 1992

5340-12-369-0843
Spring Loaded Cylinder Fastener

123690843
GN617-5-G-NI: RNCC: 3 | RNVC: 2
7804981166AA: RNCC: 5 | RNVC: 2

19 May 2006

5340-12-337-1400
Strap Bolt

123371400
52.3301.010.08: RNCC: 3 | RNVC: 2

24 Jan 1995

5340-12-371-3672
Helical Compression Spring Seat

123713672
R900108245: RNCC: 3 | RNVC: 2
108245: RNCC: 5 | RNVC: 2

21 Mar 2007

5340-12-189-4216
Nut And Bolt Locking Plate

121894216
CF 429 308: RNCC: 3 | RNVC: 2
CF429308: RNCC: 5 | RNVC: 2
CF429308: RNCC: 5 | RNVC: 2
CF 429 308: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-12-316-1146
Mounting Bracket

123161146
068903141K: RNCC: 3 | RNVC: 2

23 Dec 1988

5340-12-315-1909
Angle Bracket

123151909
3873120687: RNCC: 3 | RNVC: 2
387 312 06 87: RNCC: 5 | RNVC: 2

28 Sep 1988

5340-12-342-2092
Loop Clamp

123422092
8211 035: RNCC: 3 | RNVC: 2
8211.035: RNCC: 5 | RNVC: 2
RP 16: RNCC: 5 | RNVC: 2

7 Jan 1997

5340-12-363-3723
Nonmetallic Bumper

123633723
710301908: RNCC: 3 | RNVC: 2

3 Jun 2004

5340-12-335-0749
Angle Bracket

123350749
0048-208000A06B: RNCC: 2 | RNVC: 2
0048-208000A06B: RNCC: 3 | RNVC: 2

20 Jul 1994

5340-12-174-3374
Angle Bracket

121743374
52-0164-000-06: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-12-197-0431
Recess Handle

121970431
4357477087: RNCC: 3 | RNVC: 2

13 Sep 1983

5340-12-319-9327
Door Holder

123199327
3097401416: RNCC: 3 | RNVC: 2

17 Nov 1989

5340-12-393-5139
Door Button

123935139
8424172: RNCC: 3 | RNVC: 2

20 Sep 2013

5340-12-374-7211
Angle Bracket

123747211
4615240210: RNCC: 3 | RNVC: 2
4615240210: RNCC: 5 | RNVC: 2

11 Mar 2008

5340-12-360-4103
Dust And Moisture Seal Protective Cap

123604103
0009644596: RNCC: 3 | RNVC: 2
0009644596: RNCC: 5 | RNVC: 2

19 May 2003

5340-12-312-4742
Escutcheon Plate

123124742
100000815: RNCC: 2 | RNVC: 2
332037: RNCC: 3 | RNVC: 2
10 0000 815: RNCC: 5 | RNVC: 2
100000815: RNCC: 5 | RNVC: 2
0007430030: RNCC: 5 | RNVC: 2

12 Jan 1988

5340-12-390-7010
Lock-Release Lever

123907010
F1.4553-30-01-40.00.00: RNCC: 3 | RNVC: 2

5 Dec 2012

5340-12-151-8896
Strap End Clip

121518896
4048900194: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-368-2591
Mounting Bracket

123682591
T113M1001211: RNCC: 3 | RNVC: 2

18 Jan 2006

5340-12-357-5715
Access Cover

123575715
3720-000000-07: RNCC: 3 | RNVC: 2

3 Jul 2002

5340-12-322-0159
Nonmetallic Bumper

123220159
Q-5: RNCC: 3 | RNVC: 2
740004.CR: RNCC: 3 | RNVC: 2
542 503: RNCC: 5 | RNVC: 2
62469003: RNCC: 5 | RNVC: 2
Q-5: RNCC: 5 | RNVC: 9
Q5: RNCC: 5 | RNVC: 9

17 Jul 1990

5340-12-301-7016
Strap Hinge

123017016
116 004: RNCC: 3 | RNVC: 2
106304/C: RNCC: 5 | RNVC: 2
116004: RNCC: 5 | RNVC: 2
3527: RNCC: 5 | RNVC: 2
116 004: RNCC: 5 | RNVC: 2
106304/C: RNCC: 5 | RNVC: 9
116 004: RNCC: 5 | RNVC: 9
116004: RNCC: 5 | RNVC: 9
3527: RNCC: 5 | RNVC: 9

3 Nov 1984

5340-12-196-6814
Lock-Release Lever

121966814
3.31.0327.0: RNCC: 3 | RNVC: 2
3.31.327.0: RNCC: 5 | RNVC: 2

1 Aug 1983

5340-12-325-7160
Electrical-Mechanical Equipment Post

123257160
DN02 012.1: RNCC: 3 | RNVC: 2
DN02.012.1: RNCC: 5 | RNVC: 2
DN02 012.1: RNCC: 5 | RNVC: 2

2 Jul 1991

5340-12-387-0913
Retaining Bail

123870913
10187-188416.000.0: RNCC: 2 | RNVC: 2
10187-188416.000.0: RNCC: 3 | RNVC: 2

4 Nov 2011

5340-12-319-7289
Elastic Strap

123197289
8-7318.00: RNCC: 2 | RNVC: 2
8-7318.00: RNCC: 3 | RNVC: 2
8-7318.00: RNCC: 5 | RNVC: 9
9867800: RNCC: 5 | RNVC: 9

30 Oct 1989

5340-12-363-1286
Access Cover

123631286
96.2.156.0070: RNCC: 3 | RNVC: 2

6 May 2004

5340-12-365-3500
Mounting Bracket

123653500
2300109-970491.001.0: RNCC: 3 | RNVC: 2

22 Dec 2004

5340-12-356-2550
Rigid Caster

123562550
1460116-3: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-12-308-0662
Lock-Release Lever

123080662
2195670: RNCC: 3 | RNVC: 2
21956707: RNCC: 5 | RNVC: 2
4.457509: RNCC: 5 | RNVC: 2

28 Aug 1986

5340-12-302-6165
Lock-Release Lever

123026165
YK03310819: RNCC: 3 | RNVC: 2
03310819: RNCC: 5 | RNVC: 9
H.B 913SV 1056 1975 03 31 0819: RNCC: 5 | RNVC: 9

17 Jan 1985

5340-12-311-2728
Mending Plate

123112728
1888957: RNCC: 3 | RNVC: 2
5303.016.00.10/006: RNCC: 5 | RNVC: 2
5303.016.00.10.006: RNCC: 5 | RNVC: 2

11 Aug 1987

5340-12-320-4726
Retaining Strap

123204726
00105-239-000: RNCC: 3 | RNVC: 2
105-239-00: RNCC: 5 | RNVC: 9

18 Jan 1990

5340-12-177-1353
Retaining Strap

121771353
5800822-07-003: RNCC: 3 | RNVC: 2
5800822-07.003: RNCC: 5 | RNVC: 2

17 Jan 1979

5340-12-166-3611
Mending Plate

121663611
12513000: RNCC: 3 | RNVC: 2
0126 9510: RNCC: 5 | RNVC: 2
1269510EY8751-18: RNCC: 5 | RNVC: 2
1269510EY8751-18: RNCC: 5 | RNVC: 2
01269510: RNCC: 5 | RNVC: 2
8751-18-03-44: RNCC: 5 | RNVC: 2
1269510: RNCC: 5 | RNVC: 9

31 Aug 1976

5340-12-315-8032
Metal Runner

123158032
NO PRIMARY REF 12-315-8032: RNCC: 3 | RNVC: 2
KN03.500.08: RNCC: 5 | RNVC: 9

26 Nov 1988

5340-12-349-6065
Retaining Strap

123496065
453 7408-252: RNCC: 3 | RNVC: 2
453 7408-252: RNCC: 5 | RNVC: 2
4537408-252: RNCC: 5 | RNVC: 9
(241)S34654537408-252: RNCC: 8 | RNVC: 2

8 Dec 1999

5340-12-356-5095
Mending Plate

123565095
9XB411316-00: RNCC: 3 | RNVC: 2

7 Mar 2002

5340-12-354-5150
Retaining Band

123545150
9019A1013-01: RNCC: 3 | RNVC: 2

24 Jul 2001

5340-12-329-9056
Nonmetallic Bumper

123299056
1300555-320070-00-01: RNCC: 2 | RNVC: 2
GE5011G027: RNCC: 3 | RNVC: 2

10 Oct 1992

5340-12-339-0440
Angle Bracket

123390440
5801357-4310.01: RNCC: 2 | RNVC: 2
5801357-4310.01: RNCC: 3 | RNVC: 2

4 Oct 1995

5340-12-354-4087
Rod End Connector

123544087
629320-01: RNCC: 3 | RNVC: 2
06440P003019: RNCC: 5 | RNVC: 2

9 Jul 2001

5340-12-306-6289
Hinge Torsion Bar

123066289
65103: RNCC: 3 | RNVC: 2

17 Mar 1986

5340-12-350-4343
Section Block Clamp

123504343
JN0413L32: RNCC: 3 | RNVC: 2

30 Mar 2000

5340-12-157-1857
Resilient Mount

121571857
4L84-00-026: RNCC: 3 | RNVC: 2
4L84-00-026: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-338-9228
Metallic Bumper

123389228
2300002-181042.001: RNCC: 2 | RNVC: 2
2300002-181042.001: RNCC: 3 | RNVC: 2
2300002-181042.001: RNCC: 3 | RNVC: 2
2300002-181042.001: RNCC: 5 | RNVC: 9

11 Sep 1995

5340-12-374-3467
Loop Clamp

123743467
5308399: RNCC: 3 | RNVC: 2

11 Feb 2008

5340-12-352-8325
Access Cover

123528325
8333503200: RNCC: 3 | RNVC: 2
83335032: RNCC: 5 | RNVC: 2

20 Dec 2000

5340-12-307-0880
Nonmetallic Bumper

123070880
12901: RNCC: 3 | RNVC: 2

7 May 1986

5340-12-356-0498
Mounting Bracket

123560498
2339-630053A00C: RNCC: 3 | RNVC: 2

16 Jan 2002

5340-12-317-8379
Angle Bracket

123178379
3641502: RNCC: 3 | RNVC: 2

18 May 1989

5340-12-339-3351
Retaining Clip

123393351
2417601001: RNCC: 3 | RNVC: 2
490 085 00: RNCC: 5 | RNVC: 2

10 Nov 1995

5340-12-374-0748
Angle Bracket

123740748
181031703: RNCC: 2 | RNVC: 2
181031703: RNCC: 3 | RNVC: 2

16 Jan 2008

5340-12-374-1613
Angle Bracket

123741613
4374261440: RNCC: 3 | RNVC: 2

24 Jan 2008

5340-12-370-8871
Dust And Moisture Seal Protective Cap-Plug

123708871
DVAI059: RNCC: 3 | RNVC: 2

12 Jan 2007

5340-12-308-4013
Lock-Release Lever

123084013
6900108-150.03: RNCC: 2 | RNVC: 2
774-049-68: RNCC: 3 | RNVC: 2

7 Oct 1986

5340-12-309-7789
Retaining Strap

123097789
NO PRIMARY REF 12-309-7789: RNCC: 3 | RNVC: 2
7601 174066: RNCC: 5 | RNVC: 9

27 Feb 1987

5340-12-134-1239
Nonmetallic Bumper

121341239
F5535-17-20-15: RNCC: 3 | RNVC: 2
5535-17-20-15: RNCC: 5 | RNVC: 2
5535-17-20.15: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-368-9797
Dust And Moisture Seal Protective Cover

123689797
T18-0004-004: RNCC: 3 | RNVC: 2

10 May 2006

5340-12-356-8459
Angle Bracket

123568459
ED88-0100-01001-151: RNCC: 3 | RNVC: 2

10 Apr 2002

5340-12-199-3082
Nonmetallic Bumper

121993082
1000042-133100.08: RNCC: 3 | RNVC: 2
1000042-133100-08: RNCC: 5 | RNVC: 2

11 Apr 1984

5340-12-178-7868
Retaining Strap

121787868
06670620202: RNCC: 3 | RNVC: 2
2X8-6M7-750-60A4C: RNCC: 5 | RNVC: 2

16 May 1979

5340-12-371-8063
Mending Plate

123718063
51-1586-041-05: RNCC: 3 | RNVC: 2

18 May 2007

5340-12-310-9925
Electrical-Mechanical Equipment Post

123109925
NGE 108-2560: RNCC: 3 | RNVC: 2

16 Jul 1987

5340-12-176-1059
Dust And Moisture Seal Protective Cap-Plug

121761059
N25-00037: RNCC: 3 | RNVC: 2
N25-0037: RNCC: 5 | RNVC: 2

9 Nov 1978

5340-12-163-0123
Electrical-Mechanical Equipment Post

121630123
100356-802000.14: RNCC: 2 | RNVC: 2
100356-802000.14: RNCC: 3 | RNVC: 2
100356-802000-14: RNCC: 5 | RNVC: 2
100356-802000-14: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-155-4070
Butt Hinge Leaf

121554070
160-62167-17: RNCC: 3 | RNVC: 2
160-62167-17: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-190-7215
Multiple Angle Bracket

121907215
NO PRIMARY REF 12-190-7215: RNCC: 3 | RNVC: 2
7606128880: RNCC: 5 | RNVC: 9
7606 128880: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-339-0483
Mounting Bracket

123390483
1237430014: RNCC: 3 | RNVC: 2

4 Oct 1995

5340-12-320-6980
Mounting Bracket

123206980
0336 1905: RNCC: 3 | RNVC: 2
03361905KZ0146-29: RNCC: 5 | RNVC: 2

8 Feb 1990

5340-12-190-8063
Access Cover

121908063
23111-3812.10: RNCC: 3 | RNVC: 2
23111-3812.10: RNCC: 5 | RNVC: 9
1091679: RNCC: 5 | RNVC: 9
23111-3812.10: RNCC: 5 | RNVC: 9

15 Dec 1981

5340-12-356-1647
Mounting Bracket

123561647
6020760335: RNCC: 3 | RNVC: 2

29 Jan 2002

5340-12-359-0156
Mounting Bracket

123590156
1120-80155.06: RNCC: 3 | RNVC: 2

10 Dec 2002

5340-12-359-4827
Nonmetallic Bumper

123594827
0516.414-283: RNCC: 3 | RNVC: 2

10 Feb 2003

5340-12-385-4325
Angle Bracket

123854325
5502030543: RNCC: 3 | RNVC: 2

1 Jun 2011

5340-12-179-9391
Helical Compression Spring Seat

121799391
554103: RNCC: 3 | RNVC: 9

9 Aug 1979

5340-12-328-9848
Webbing Strap

123289848
2654-971123.00: RNCC: 2 | RNVC: 2
2654-971123.00: RNCC: 3 | RNVC: 2

7 Jul 1992

5340-12-381-9086
Mounting Bracket

123819086
000605-216000.01: RNCC: 2 | RNVC: 2
000605-216000.01: RNCC: 3 | RNVC: 2
39300: RNCC: 5 | RNVC: 2

16 Apr 2010

5340-12-311-2505
Dust And Moisture Seal Protective Cap

123112505
P004273402102000: RNCC: 3 | RNVC: 2
4273402102: RNCC: 5 | RNVC: 2

10 Aug 1987

5340-12-199-1797
Nonmetallic Bumper

121991797
811419809: RNCC: 3 | RNVC: 2

3 Apr 1984

5340-12-381-7904
Support Hook

123817904
08.43: RNCC: 3 | RNVC: 2

31 Mar 2010

5340-12-379-0694
Flush Lock

123790694
93303: RNCC: 3 | RNVC: 2
J6252006: RNCC: 5 | RNVC: 2
106550000: RNCC: 5 | RNVC: 2
CV150220: RNCC: 5 | RNVC: 2

19 Jun 2009

5340-12-344-3389
Mounting Bracket

123443389
81416100170: RNCC: 3 | RNVC: 2
81.41610.0170: RNCC: 5 | RNVC: 2

17 Oct 1997

5340-12-329-3684
Spring Loaded Cylinder Fastener

123293684
2300248-80275.00: RNCC: 2 | RNVC: 2
2300248-80275.00: RNCC: 3 | RNVC: 2
2300248-80275.00: RNCC: 5 | RNVC: 2
2300248-80275.00: RNCC: 5 | RNVC: 9

13 Aug 1992

5340-12-358-7657
Mounting Bracket

123587657
9412605162: RNCC: 3 | RNVC: 2

12 Nov 2002

5340-12-159-2929
Angle Bracket

121592929
117571805: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-320-7124
Double Angle Bracket

123207124
9000 2324: RNCC: 3 | RNVC: 2

8 Feb 1990

5340-12-092-2653

5340-12-164-5667

5340-12-020-0759

5340-12-360-3773
Loop Clamp

123603773
RAN112: RNCC: 3 | RNVC: 2

15 May 2003

5340-12-349-5584
Expansion Plug

123495584
DIN443-8-ST-A3P: RNCC: 2 | RNVC: 2
06150900501: RNCC: 5 | RNVC: 2

2 Dec 1999

5340-12-360-4127
Mounting Bracket

123604127
3515270611: RNCC: 3 | RNVC: 2
3515270611: RNCC: 5 | RNVC: 2

19 May 2003

5340-12-324-7666
Lock-Release Lever

123247666
2500171-452200.00: RNCC: 2 | RNVC: 2
2500171-452200.00: RNCC: 3 | RNVC: 2

22 Mar 1991

5340-12-361-0880
Bow Handle

123610880
2300223-062630.01.0: RNCC: 2 | RNVC: 2
2300223-062630.01.0: RNCC: 3 | RNVC: 2

20 Aug 2003

5340-12-305-5630
Retaining Strap

123055630
391368: RNCC: 3 | RNVC: 2

22 Nov 1985

5340-12-319-9225
Spring Tension Clip

123199225
191931: RNCC: 3 | RNVC: 2

17 Nov 1989

5340-12-393-6425
Access Cover

123936425
11.07051-0100: RNCC: 3 | RNVC: 2
11.07051-0100: RNCC: 5 | RNVC: 2

30 Sep 2013

5340-12-364-4437
Access Cover

123644437
2300397-182012.000.0: RNCC: 3 | RNVC: 2

28 Sep 2004

5340-12-340-0334
Loop Clamp

123400334
DIN3015-L-KP-3-R-21,3-PP: RNCC: 2 | RNVC: 2
321,3PP: RNCC: 3 | RNVC: 2

16 Feb 1996

5340-12-182-9952
Retaining Strap

121829952
23223-223100.00.0: RNCC: 2 | RNVC: 2
23223-223100-00-0: RNCC: 5 | RNVC: 2
23223-223100.00.0: RNCC: 5 | RNVC: 2
23223-223100-00-0: RNCC: 5 | RNVC: 9

13 Mar 1980

5340-12-198-8418
Metal Runner

121988418
5801998-100000.09: RNCC: 2 | RNVC: 2
2-03.007: RNCC: 3 | RNVC: 2
5801998-100000.09: RNCC: 3 | RNVC: 2
5801998-100000.09: RNCC: 3 | RNVC: 2
5801998-100000.09: RNCC: 5 | RNVC: 2
5801998-100000.09: RNCC: 5 | RNVC: 9
5801998-100000.09: RNCC: 5 | RNVC: 9

3 Mar 1984

5340-12-325-9936
Double Angle Bracket

123259936
23223-024000.01.0: RNCC: 2 | RNVC: 2
23223-024000.01.0: RNCC: 3 | RNVC: 2

29 Jul 1991

5340-12-191-8041
Loop Clamp

121918041
12582: RNCC: 3 | RNVC: 2
0004760536: RNCC: 5 | RNVC: 2
02-2225: RNCC: 5 | RNVC: 2
721 1 36 121 1: RNCC: 5 | RNVC: 9

8 Mar 1982

5340-12-175-9336
Gummi- Riemen

121759336
CF 453 435 AU: RNCC: 2 | RNVC: 2
CF 453 435 AU: RNCC: 3 | RNVC: 2
CF4534350U: RNCC: 5 | RNVC: 2
CF 453 435 -U: RNCC: 5 | RNVC: 2
2001278: RNCC: 5 | RNVC: 2
CF 453 435 -U: RNCC: 5 | RNVC: 2
CF 453 435 -U: RNCC: 5 | RNVC: 2
CF4534350U: RNCC: 5 | RNVC: 2
CF 453 435 -U: RNCC: 5 | RNVC: 2
CF 453 435 AU: RNCC: 5 | RNVC: 2

30 Oct 1978

5340-12-316-5924
Ball Socket Seat

123165924
0117 3814: RNCC: 3 | RNVC: 2
H3604-B10/1: RNCC: 5 | RNVC: 2

26 Jan 1989

5340-12-702-5065
Rod End Connector

127025065
VG95211-ML-127025065: RNCC: 2 | RNVC: 2
5.51.6501.0920.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-6379
Mounting Bracket

127016379
VG95211-ML-127016379: RNCC: 2 | RNVC: 2
5.12.7070.1490.07: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-2866
Loop Clamp

127012866
VG95211-ML-127012866: RNCC: 2 | RNVC: 2
5.12.5101.2090.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-306-3837
Mending Plate

123063837
421-112020.02.3: RNCC: 3 | RNVC: 2
421-112020-02-3: RNCC: 5 | RNVC: 2

25 Feb 1986

5340-12-326-5794
Metal Grille

123265794
140-134200-001-0: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-12-323-9865
Access Cover

123239865
2300232-182050.000.0: RNCC: 2 | RNVC: 2
2300232-182050.000.0: RNCC: 3 | RNVC: 2

15 Jan 1991

5340-12-346-2281
Mounting Plate

123462281
23176-189442.01.0: RNCC: 2 | RNVC: 2
23176-189442.01.0: RNCC: 3 | RNVC: 2
23176-189442-01-0: RNCC: 5 | RNVC: 2

30 Jun 1998

5340-12-702-4742
Rod End Connector

127024742
VG95211-ML-127024742: RNCC: 2 | RNVC: 2
5.51.0605.0060.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-358-9370
Dust And Moisture Seal Protective Plug

123589370
N 903 577 02 01C: RNCC: 3 | RNVC: 2

29 Nov 2002

5340-12-300-9197
Mending Plate

123009197
1423-351.21(4): RNCC: 3 | RNVC: 2

12 Sep 1984

5340-12-360-7173
Mounting Bracket

123607173
3.31.0952.1.505.0: RNCC: 3 | RNVC: 2
331095215050: RNCC: 5 | RNVC: 2

2 Jul 2003

5340-12-330-3643
Clamping Catch

123303643
01.10913-0115400.3: RNCC: 3 | RNVC: 2

8 Dec 1992

5340-12-381-9794
Loop Clamp

123819794
2 0093-381: RNCC: 3 | RNVC: 2

23 Apr 2010

5340-12-300-8727
Rod End Clevis

123008727
1423-948.45(2): RNCC: 3 | RNVC: 2

6 Sep 1984

5340-12-371-1103
Access Cover

123711103
2 0003-856: RNCC: 3 | RNVC: 2
2 0003-856: RNCC: 5 | RNVC: 2

13 Feb 2007

5340-12-363-1491
Rigid Caster

123631491
B-V162R: RNCC: 3 | RNVC: 2

6 May 2004

5340-12-701-5870
Mounting Bracket

127015870
5.12.6500.0530.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-347-6004
Handwheel

123476004
01-084.1 DN025/10: RNCC: 3 | RNVC: 2

13 Jan 1999

5340-12-391-4321
Mounting Bracket

123914321
I009668TAN686A: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-12-323-4587
Synchro Clamp

123234587
916010227112: RNCC: 3 | RNVC: 9

27 Nov 1990

5340-12-324-7058
Electrical-Mechanical Equipment Post

123247058
2902070110: RNCC: 3 | RNVC: 2

19 Mar 1991

5340-12-377-4192
Dust And Moisture Seal Protective Cap

123774192
504000761: RNCC: 3 | RNVC: 2
504022455 TEIL 504000761: RNCC: 5 | RNVC: 2

15 Jan 2009

5340-12-306-7254
Retaining Clip

123067254
1219930225: RNCC: 3 | RNVC: 2

24 Mar 1986

5340-12-307-2574
Schlosz Schluessel

123072574
4167660006: RNCC: 3 | RNVC: 2
4167660006 0001: RNCC: 5 | RNVC: 2

27 May 1986

5340-12-350-7372
Double Angle Bracket

123507372
10063-060300: RNCC: 3 | RNVC: 2
10063-060300: RNCC: 5 | RNVC: 9

12 May 2000

5340-12-365-1591
Angle Bracket

123651591
S932M1026101: RNCC: 2 | RNVC: 2
S932M1026101: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-12-333-6396
Nonmetallic Bumper

123336396
1H0823500: RNCC: 3 | RNVC: 9

17 Jan 1994

5340-12-347-4896
Angle Bracket

123474896
88.8281.5312: RNCC: 3 | RNVC: 2

16 Dec 1998

5340-12-368-1316
Mounting Bracket

123681316
5161-320300A05B: RNCC: 2 | RNVC: 2
5161-320300A05B: RNCC: 3 | RNVC: 2

14 Dec 2005

5340-12-355-2118
Loop Clamp

123552118
JN0206-63: RNCC: 3 | RNVC: 2

23 Oct 2001

5340-12-149-3966
Bow Handle

121493966
AW5200-100-41: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-182-5504
Nonmetallic Bumper

121825504
842.5L.6661.002.82.NR70.STZN: RNCC: 3 | RNVC: 2
5LV6661-002-82: RNCC: 5 | RNVC: 2
5L.6661.002.82: RNCC: 5 | RNVC: 2

11 Feb 1980

5340-12-389-0175
Access Door Hinge

123890175
F1.1611-26-19-10.60-00: RNCC: 3 | RNVC: 2

16 May 2012

5340-12-317-8085
Nonmetallic Bumper

123178085
DIN95364-D50X18-CR55ST: RNCC: 2 | RNVC: 2
331052647: RNCC: 5 | RNVC: 2
81135-50X18-M10X28.CR55.ST: RNCC: 5 | RNVC: 2
VG95364-D50X18-CR55ST: RNCC: 5 | RNVC: 9

17 May 1989

5340-12-349-6203
Loop Clamp

123496203
11 42 1 338 637: RNCC: 3 | RNVC: 2

9 Dec 1999

5340-12-354-8241
Helical Compression Spring Retainer

123548241
1030020-180000.052.0: RNCC: 2 | RNVC: 2
1030020-180000.052.0: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-197-9132
Mending Plate

121979132
CF 339 024 A: RNCC: 3 | RNVC: 2
CF 339 024: RNCC: 5 | RNVC: 2
CF 339 024: RNCC: 5 | RNVC: 2
CF 339 024 A: RNCC: 5 | RNVC: 2

1 Dec 1983

5340-12-130-0608
Rod End Connector

121300608
2020063: RNCC: 3 | RNVC: 2
R6: RNCC: 5 | RNVC: 9
03050: RNCC: 5 | RNVC: 9
202 006 3: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-700-9094
Angle Bracket

127009094
VG95211-ML-127009094: RNCC: 2 | RNVC: 2
2.12.7701.3762.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-365-2279
Door Hook

123652279
2500278-191751.000.0: RNCC: 3 | RNVC: 2

9 Dec 2004

5340-12-701-2542
Loop Clamp

127012542
VG95211-ML-127012542: RNCC: 2 | RNVC: 2
5.12.4002.0320.00: RNCC: 3 | RNVC: 2
0501420066999: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-356-6400
Dust And Moisture Seal Boot

123566400
N/S/1-6/405/1: RNCC: 3 | RNVC: 2

19 Mar 2002

5340-12-327-5871
Mending Plate

123275871
CF 332 055 A: RNCC: 2 | RNVC: 2
CF 332 055 A: RNCC: 3 | RNVC: 2

5 Feb 1992

5340-12-175-6394
Webbing Strap

121756394
2300074-4726.00: RNCC: 2 | RNVC: 2
2300074-4726-00: RNCC: 5 | RNVC: 2
2300074-4726-00: RNCC: 5 | RNVC: 9
2300074-4726-00: RNCC: 5 | RNVC: 9

10 Oct 1978

5340-12-174-7850
Retaining Strap

121747850
01168143: RNCC: 3 | RNVC: 2
1168143EF8932-02: RNCC: 5 | RNVC: 2
X07268-21: RNCC: 5 | RNVC: 2
B13H3201: RNCC: 5 | RNVC: 2

3 Aug 1978

5340-12-187-9820
Resilient Mount

121879820
E1FH 78-01: RNCC: 3 | RNVC: 2
35343-007: RNCC: 5 | RNVC: 2
103433: RNCC: 5 | RNVC: 2
E1FH78-01: RNCC: 5 | RNVC: 2

25 May 1981

5340-12-185-2759
Manual Control Handle

121852759
02-0899-180550-00-0: RNCC: 3 | RNVC: 2

25 Sep 1980

5340-12-330-0543
Retaining Band

123300543
8315007: RNCC: 3 | RNVC: 2
4-8315-007: RNCC: 5 | RNVC: 2
8432044: RNCC: 5 | RNVC: 2

28 Oct 1992

5340-12-348-8717
Metallic Solid Wheel

123488717
245/7346-46-00-25: RNCC: 3 | RNVC: 2

30 Aug 1999

5340-12-701-4122
Mounting Bracket

127014122
VG95211-ML-127014122: RNCC: 2 | RNVC: 2
5.12.5311.8390.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-306-3844
Webbing Strap

123063844
993-110512.103.0: RNCC: 3 | RNVC: 2
993-110512.103.0: RNCC: 5 | RNVC: 9
000-D1-20X2,0X90-PE-RAL6031: RNCC: 6 | RNVC: 9

25 Feb 1986

5340-12-700-8516
Loop Clamp

127008516
VG95211-ML-127008516: RNCC: 2 | RNVC: 2
155N1119-209: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-194-4708
Turnbuckle

121944708
A-446805-401: RNCC: 3 | RNVC: 2
A446805-401: RNCC: 5 | RNVC: 2

8 Nov 1982

5340-12-701-8455
Loop Clamp

127018455
VG95211-ML-127018455: RNCC: 2 | RNVC: 2
5149A-75: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-174-6827
Plug Button

121746827
237-0555-000: RNCC: 3 | RNVC: 2
0597938: RNCC: 5 | RNVC: 2
597938: RNCC: 5 | RNVC: 9

19 Jul 1978

5340-12-352-2952
Loop Clamp

123522952
5092686: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-12-340-1125
Mounting Plate

123401125
1202 5219: RNCC: 3 | RNVC: 2

28 Feb 1996

5340-12-154-3801
Retaining Band

121543801
04934: RNCC: 3 | RNVC: 2
04934: RNCC: 5 | RNVC: 2
04934: RNCC: 5 | RNVC: 9
07-44C47: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-313-7982
Retaining Strap

123137982
1684046-100.05: RNCC: 3 | RNVC: 2

6 May 1988

5340-12-348-6623
Mounting Bracket

123486623
4634301: RNCC: 2 | RNVC: 2
4634301: RNCC: 3 | RNVC: 2

2 Aug 1999

5340-12-367-8355
Mounting Plate

123678355
5590981439: RNCC: 3 | RNVC: 2

20 Oct 2005

5340-12-324-5896
Access Cover

123245896
185X5 KN129 ALMG3G22: RNCC: 3 | RNVC: 2
01.03.1057 TEIL 1400: RNCC: 5 | RNVC: 2
KN129 COVER: RNCC: 5 | RNVC: 2

4 Mar 1991

5340-12-379-1641
Shimmy Damper

123791641
4333020080: RNCC: 3 | RNVC: 2

30 Jun 2009

5340-12-380-5515
Loop Clamp

123805515
05530130: RNCC: 3 | RNVC: 2
030402 R1 DLO9013: RNCC: 5 | RNVC: 2

9 Nov 2009

5340-12-385-1357
Access Cover

123851357
I010788: RNCC: 3 | RNVC: 2

4 May 2011

5340-12-319-0959
Shimmy Damper

123190959
109705: RNCC: 3 | RNVC: 2

6 Sep 1989

5340-12-386-4171
Loop Clamp

123864171
DIN3016-1-D1-48X20-W1-2-NBR: RNCC: 2 | RNVC: 2

31 Aug 2011

5340-12-703-2055
Mounting Plate

127032055
VG95211-ML-127032055: RNCC: 2 | RNVC: 2
5.12.5305.8201.98: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-12-365-2544
Mounting Plate

123652544
2500267-190000.050.0: RNCC: 3 | RNVC: 2

11 Dec 2004

5340-12-325-9912
Loop Clamp

123259912
DIN3015-L-KP-5-R-32-PA+EP+AS-W1: RNCC: 2 | RNVC: 2
DIN3015-L-KP-5-R-32-PA6+EP+AS-W1: RNCC: 2 | RNVC: 2
HRL5ES1-32PA STMBL: RNCC: 3 | RNVC: 2
RANR15-532: RNCC: 3 | RNVC: 2
532PA-ES-AS: RNCC: 3 | RNVC: 2
HRL5ES1-32PA: RNCC: 5 | RNVC: 2
RANR15-532: RNCC: 5 | RNVC: 2
DIN3015-LKP5R-32PA+EP+AS-W1: RNCC: 5 | RNVC: 2
1X532UL-ES-AS: RNCC: 5 | RNVC: 9

29 Jul 1991

5340-12-300-1584
Mending Plate

123001584
P-296814-441: RNCC: 3 | RNVC: 2
P296814-441: RNCC: 5 | RNVC: 2

7 Jul 1984

5340-12-302-6302
Angle Bracket

123026302
5801101-2731.003: RNCC: 3 | RNVC: 2

18 Jan 1985

5340-12-149-9096
Nonmetallic Bumper

121499096
515-605-B.00.06: RNCC: 3 | RNVC: 2
515-605-B.00.06: RNCC: 3 | RNVC: 2
515605B00-06: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-701-9436
Rod End Clevis

127019436
VG95211-ML-127019436: RNCC: 2 | RNVC: 2
5.12.0603.9108.98: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-12-385-4939
Turnbuckle Body

123854939
F1.1692-50-10-20.00-00: RNCC: 3 | RNVC: 2

9 Jun 2011

5340-12-324-4044
Metal Runner

123244044
7068-84000-002-2: RNCC: 3 | RNVC: 2

13 Feb 1991

5340-12-315-0857
Dust And Moisture Seal Protective Plug

123150857
1483212010: RNCC: 3 | RNVC: 2
0009970005: RNCC: 5 | RNVC: 2
000 997 00 05: RNCC: 5 | RNVC: 2

14 Sep 1988

5340-12-384-9831
Mounting Plate

123849831
F1.1289-37-10-00.00-35: RNCC: 3 | RNVC: 2

15 Apr 2011

5340-12-327-2370
Spring Tension Clip

123272370
5803674-206000.02: RNCC: 2 | RNVC: 2
7804234002: RNCC: 3 | RNVC: 2
78042 34002: RNCC: 5 | RNVC: 9

19 Dec 1991

5340-12-342-8099
Mounting Bracket

123428099
5006-092: RNCC: 3 | RNVC: 2

3 Apr 1997

5340-12-312-5339
Access Door

123125339
5800590-4110.001: RNCC: 3 | RNVC: 2
04.54071-21.00.001.3: RNCC: 5 | RNVC: 2

14 Jan 1988

5340-12-318-8577
Webbing Strap

123188577
704-122343-000-0: RNCC: 3 | RNVC: 2

22 Aug 1989

5340-12-193-7400
Rigid Caster

121937400
LR-TB 20/13: RNCC: 3 | RNVC: 2
LRTB20-13: RNCC: 5 | RNVC: 2

25 Aug 1982

5340-12-349-7694
Angle Bracket

123497694
81252450130: RNCC: 3 | RNVC: 2
81.25245.0130: RNCC: 5 | RNVC: 2

6 Jan 2000

5340-12-356-0856
Retaining Bail

123560856
114280: RNCC: 3 | RNVC: 9

21 Jan 2002

5340-12-350-0664
Mounting Bracket

123500664
T304M2010101: RNCC: 3 | RNVC: 2

10 Feb 2000

5340-12-193-0308
Helical Compression Spring Seat

121930308
5800980086: RNCC: 3 | RNVC: 2

15 Jun 1982

5340-12-314-1181
Angle Bracket

123141181
113287: RNCC: 3 | RNVC: 2

9 Jun 1988

5340-12-130-1177

5340-12-024-9742

5340-12-130-1982

5340-12-320-1025
Mounting Bracket

123201025
C195-A110-C85: RNCC: 3 | RNVC: 2

7 Dec 1989

5340-12-304-7455
Angle Bracket

123047455
160-73203-03: RNCC: 3 | RNVC: 2
160-73203-03: RNCC: 5 | RNVC: 9

16 Aug 1985

5340-12-385-2271
Dust And Moisture Seal Protective Cover

123852271
F1.1189-40-40-10.25-00: RNCC: 3 | RNVC: 2

11 May 2011

5340-12-383-5096
Bow Handle

123835096
714003: RNCC: 3 | RNVC: 2

2 Nov 2010

5340-12-316-4161
Helical Compression Spring Retainer

123164161
6358152: RNCC: 3 | RNVC: 2

17 Jan 1989

5340-12-322-7175
Dust And Moisture Seal Protective Plug

123227175
602E025: RNCC: 3 | RNVC: 2

14 Sep 1990

5340-12-122-2997
Nonmetallic Bumper

121222997
1803330165: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-351-0470
Mounting Bracket

123510470
7802495151: RNCC: 3 | RNVC: 2
78024 95151: RNCC: 5 | RNVC: 9

19 Jun 2000

5340-12-327-6258
Dust And Moisture Seal Protective Plug

123276258
900A17: RNCC: 3 | RNVC: 2
GPN900A17: RNCC: 5 | RNVC: 2
7700016621: RNCC: 5 | RNVC: 2
GPN900A17: RNCC: 5 | RNVC: 2
900001700: RNCC: 5 | RNVC: 2
GPN900,A17: RNCC: 5 | RNVC: 2

10 Feb 1992

5340-12-301-6752
Pipe Bracket

123016752
4178627: RNCC: 3 | RNVC: 2
S12B.E03.01.28.000: RNCC: 5 | RNVC: 2

1 Nov 1984

5340-12-311-4219
Mending Plate

123114219
272.306.768: RNCC: 3 | RNVC: 2
272.306 768: RNCC: 5 | RNVC: 9

1 Sep 1987

5340-12-331-4741
Resilient Mount

123314741
6706820023: RNCC: 3 | RNVC: 9

7 May 1993

5340-12-352-7418
Angle Bracket

123527418
1311 307 053: RNCC: 3 | RNVC: 2
1311307053: RNCC: 5 | RNVC: 2

11 Dec 2000

5340-12-308-6829
Angle Bracket

123086829
162-45040: RNCC: 3 | RNVC: 2

7 Nov 1986

5340-12-357-5139
Butt Hinge

123575139
342.29.304: RNCC: 3 | RNVC: 2

27 Jun 2002

5340-12-359-6049
Mounting Bracket

123596049
9452630041: RNCC: 3 | RNVC: 2

20 Feb 2003

5340-12-310-0972
Resilient Mount

123100972
741823: RNCC: 3 | RNVC: 2
0019880110: RNCC: 5 | RNVC: 2
0019880110: RNCC: 5 | RNVC: 2

7 Apr 1987

5340-12-372-4338
Retaining Clip

123724338
42231416600: RNCC: 3 | RNVC: 2

17 Jul 2007

5340-12-010-8452

5340-12-147-6896
Gurtgewebe- Riemen

5340-12-148-5481
Leder- Riemen

5340-12-190-9148
Handwheel

121909148
29-280-60X7: RNCC: 3 | RNVC: 2

22 Dec 1981

5340-12-186-4231
Mending Plate

121864231
028-701170-01-0: RNCC: 3 | RNVC: 2
028-701170-01-0: RNCC: 5 | RNVC: 9

23 Dec 1980

5340-12-305-0579
Angle Bracket

123050579
A-296712-135: RNCC: 3 | RNVC: 2
A296712-135: RNCC: 5 | RNVC: 2

23 Sep 1985

5340-12-319-8597
Mending Plate

123198597
6100125-11000.002: RNCC: 2 | RNVC: 2
4246015422: RNCC: 3 | RNVC: 2

10 Nov 1989

5340-12-141-3302
Strap Hinge

121413302
4649-95MM: RNCC: 3 | RNVC: 2
2509-107-375: RNCC: 5 | RNVC: 9
2509-107.375: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-170-0389
Spring Tension Clip

121700389
405-11.13: RNCC: 3 | RNVC: 2
405-11-13: RNCC: 5 | RNVC: 2

21 Jun 1977

5340-12-361-3353
Double Angle Bracket

123613353
51974800713: RNCC: 3 | RNVC: 2
51.97480-0713: RNCC: 5 | RNVC: 2

18 Sep 2003

5340-12-326-3825
Resilient Mount

123263825
DIN95363-A25X35-M6X18,0-NR60ST: RNCC: 2 | RNVC: 2
500000-25X35-M6X18.NR60.ST: RNCC: 5 | RNVC: 2
5218125/11MN60: RNCC: 5 | RNVC: 2
VG95363-A25X35-M6X18,0-NR60ST: RNCC: 5 | RNVC: 9

9 Sep 1991

5340-12-307-0798
Butt Hinge

123070798
D6F4804-31: RNCC: 3 | RNVC: 2
151-410000-906-0: RNCC: 5 | RNVC: 2

6 May 1986

5340-12-365-8421
Mounting Plate

123658421
M-507-005-09.0: RNCC: 3 | RNVC: 2

11 Feb 2005

5340-12-342-0116
Nonmetallic Bumper

123420116
037528-050.6/00: RNCC: 3 | RNVC: 2
037528-050.6: RNCC: 5 | RNVC: 2
03/7528-050.6: RNCC: 5 | RNVC: 2
03752805X6: RNCC: 5 | RNVC: 2

29 Nov 1996

5340-12-340-6069
Multiple Angle Bracket

123406069
P-295669-409: RNCC: 3 | RNVC: 2
P295669-409: RNCC: 5 | RNVC: 2

10 May 1996

5340-12-177-1345
Access Cover

121771345
5801209-2127-005: RNCC: 3 | RNVC: 2
5801209-2127.005: RNCC: 5 | RNVC: 2

17 Jan 1979

5340-12-701-1183
Loop Clamp

127011183
VG95211-ML-127011183: RNCC: 2 | RNVC: 2
4727A-20-20: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-182-1195
Spring Tension Clip

121821195
4582968: RNCC: 3 | RNVC: 2
5801505-209000-001: RNCC: 5 | RNVC: 2
5801505-209000-001: RNCC: 5 | RNVC: 9
5801505-209000.001: RNCC: 5 | RNVC: 9

14 Jan 1980

5340-12-306-0492
Clamping Catch

123060492
1865-010530.02.0: RNCC: 3 | RNVC: 9

23 Jan 1986

5340-12-701-7949
Mounting Bracket

127017949
VG95211-ML-127017949: RNCC: 2 | RNVC: 2
5.12.8101.3070.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-367-9583
Fuehrungs- Schiene

123679583
01.110.726.0: RNCC: 3 | RNVC: 2

10 Nov 2005

5340-12-362-0735
Mounting Bracket

123620735
117-84436: RNCC: 3 | RNVC: 2

6 Jan 2004

5340-12-388-2943
Casement Fastener

123882943
1107-U159-G: RNCC: 3 | RNVC: 2

8 Mar 2012

5340-12-136-2993
Retaining Strap

121362993
124M80004E1: RNCC: 3 | RNVC: 2
28399951020E0: RNCC: 5 | RNVC: 2
8399951020: RNCC: 5 | RNVC: 2
124M80004: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-387-0295
Mounting Plate

123870295
5802017-719310.00: RNCC: 2 | RNVC: 2
5802017-719310.00: RNCC: 3 | RNVC: 2

27 Oct 2011

5340-12-364-2456
Angle Bracket

123642456
4174260246: RNCC: 3 | RNVC: 2

3 Sep 2004

5340-12-126-0303
Strap Fastener Loop

121260303
DIN6406-A25-ALMGSI-MATT: RNCC: 2 | RNVC: 2
A25DIN6406ALMGSI: RNCC: 5 | RNVC: 2
A25DIN6406ALMGSIMATT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-348-0665
Angle Bracket

123480665
58R052-17171: RNCC: 2 | RNVC: 2
58R052-17171: RNCC: 3 | RNVC: 2

8 Apr 1999

5340-12-356-7501
Angle Bracket

123567501
J92228814-002: RNCC: 3 | RNVC: 2
008671562: RNCC: 5 | RNVC: 2

3 Apr 2002

5340-12-338-1229
Mounting Plate

123381229
230-376.49: RNCC: 3 | RNVC: 2
PK-HH-44: RNCC: 5 | RNVC: 9

26 May 1995

5340-12-190-8118
Dust And Moisture Seal Protective Cap

121908118
127.120.7: RNCC: 3 | RNVC: 2
1900508011: RNCC: 5 | RNVC: 2
NNK1-12X: RNCC: 5 | RNVC: 2
NNK1/12X: RNCC: 5 | RNVC: 2

16 Dec 1981

5340-12-191-6038
Electrical-Mechanical Equipment Post

121916038
8-1802.04: RNCC: 2 | RNVC: 2
8-1802-04: RNCC: 2 | RNVC: 2
8-1802.04: RNCC: 3 | RNVC: 2
8-1802-04: RNCC: 5 | RNVC: 9
8-1802.04: RNCC: 5 | RNVC: 9

15 Feb 1982

5340-12-701-8095
Angle Bracket

127018095
VG95211-ML-127018095: RNCC: 2 | RNVC: 2
5.12.8800.0982.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-301-1648
Angle Bracket

123011648
A-243799-034: RNCC: 3 | RNVC: 2
A243799-034: RNCC: 5 | RNVC: 2

25 Sep 1984

5340-12-338-7266
Bow Handle

123387266
6700017-205420.02: RNCC: 2 | RNVC: 2
6700017-205420.02: RNCC: 3 | RNVC: 2

21 Aug 1995

5340-12-365-5908
Angle Bracket

123655908
J32421022-001: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-185-9567
Nonmetallic Bumper

121859567
751530-017-0: RNCC: 3 | RNVC: 2
1227778: RNCC: 5 | RNVC: 2
4900059-751530-017-0: RNCC: 5 | RNVC: 2
4900059-751530.017.0: RNCC: 5 | RNVC: 2
4900059-751530-017-0: RNCC: 5 | RNVC: 9
4900059-751530.017.0: RNCC: 5 | RNVC: 9

13 Nov 1980

5340-12-197-3730
Clamping Catch

121973730
531906-0001: RNCC: 3 | RNVC: 2
531906-0001: RNCC: 5 | RNVC: 9
531906-0001.000: RNCC: 5 | RNVC: 9

17 Oct 1983

5340-12-335-2272
Access Cover

123352272
704-122510-000-0: RNCC: 3 | RNVC: 2

28 Jul 1994

5340-12-392-0003
Loop Clamp

123920003
DIN3016-1-D1-10X12-W5-CR: RNCC: 2 | RNVC: 2

24 Apr 2013

5340-12-165-9908
Nonmetallic Bumper

121659908
100429-15000-02-0: RNCC: 2 | RNVC: 2
100429-15000-02-0: RNCC: 3 | RNVC: 2
100429-15000-02-0: RNCC: 5 | RNVC: 9

24 Jul 1976

5340-12-350-9877
Webbing Strap

123509877
S-20481-15: RNCC: 3 | RNVC: 2

14 Jun 2000

5340-12-378-1115
Retaining Strap

123781115
9997001-827100.002.0: RNCC: 3 | RNVC: 2

13 Mar 2009

5340-12-701-2483
Mounting Bracket

127012483
VG95211-ML-127012483: RNCC: 2 | RNVC: 2
5.12.3600.8140.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-174-4670
Detent Plunger

121744670
23223-187103.01.0: RNCC: 2 | RNVC: 2
23223-187103.01.0: RNCC: 3 | RNVC: 2
23223-187103-01-0: RNCC: 5 | RNVC: 2
23223-187103-01-0: RNCC: 5 | RNVC: 9
23223-187103.01.0: RNCC: 5 | RNVC: 9

3 Jul 1978

5340-12-353-4139
Loop Clamp

123534139
SPGU6000.50/25SZ/B-W1: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-12-342-1560
Mounting Plate

123421560
536D14032: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-12-363-9994
Mounting Plate

123639994
T621P1001164: RNCC: 3 | RNVC: 2

11 Aug 2004

5340-12-377-7720
Access Cover

123777720
64293395: RNCC: 3 | RNVC: 2

10 Feb 2009

5340-12-305-0222
Pipe Bracket

123050222
0240 6111: RNCC: 3 | RNVC: 2
4073070: RNCC: 5 | RNVC: 2
02406111ED0147-17: RNCC: 5 | RNVC: 2

18 Sep 1985

5340-12-377-7249
Dust And Moisture Seal Protective Plug

123777249
6475623810: RNCC: 3 | RNVC: 2
0029978986: RNCC: 5 | RNVC: 2

6 Feb 2009

5340-12-329-8901
Elastic Strap

123298901
7002244: RNCC: 3 | RNVC: 2

9 Oct 1992

5340-12-198-9289
Resilient Mount

121989289
5372230112: RNCC: 3 | RNVC: 2

14 Mar 1984

5340-12-355-4006
Double Angle Bracket

123554006
4635012720: RNCC: 3 | RNVC: 2

12 Nov 2001

5340-12-375-7814
Spacing Threaded Standoff

123757814
81910200818: RNCC: 3 | RNVC: 2
81.91020.0818: RNCC: 5 | RNVC: 2

3 Jul 2008

5340-12-197-6548
Lock-Release Lever

121976548
00001049280: RNCC: 3 | RNVC: 2
81.97001.5059: RNCC: 5 | RNVC: 2
81970015059: RNCC: 5 | RNVC: 2

10 Nov 1983

5340-12-327-2504
Mounting Plate

123272504
4615250440: RNCC: 3 | RNVC: 2

20 Dec 1991

5340-12-141-6113

5340-12-043-2655

5340-12-187-3673

5340-12-146-8703
Einfach Abg Halter

5340-12-382-8622
Mounting Bracket

123828622
SW4031G042: RNCC: 3 | RNVC: 2

17 Aug 2010

5340-12-358-9461
Angle Bracket

123589461
81259400010: RNCC: 3 | RNVC: 2
81.25940.0010: RNCC: 5 | RNVC: 2

2 Dec 2002

5340-12-310-1962
Kunst Gleitschiene

123101962
AWN186-E3: RNCC: 3 | RNVC: 2
AWN186-E3: RNCC: 3 | RNVC: 2
AWN186-E3: RNCC: 5 | RNVC: 9

16 Apr 1987

5340-12-184-2344
Nonmetallic Bumper

121842344
211841691B: RNCC: 3 | RNVC: 2

8 Jul 1980

5340-12-318-9257
Manual Control Handle

123189257
2654-336123.00: RNCC: 2 | RNVC: 2
2654-336123.00: RNCC: 3 | RNVC: 2
679-08010203: RNCC: 5 | RNVC: 9
679-08010203: RNCC: 5 | RNVC: 9
2654-336 123.00: RNCC: 5 | RNVC: 9

25 Aug 1989

5340-12-302-2338
Flush Lock

123022338
620900: RNCC: 3 | RNVC: 2

11 Dec 1984

5340-12-303-0317
Electrical-Mechanical Equipment Post

123030317
VG95148A15XM5X76-AL: RNCC: 2 | RNVC: 2
2W111A008-1220.02: RNCC: 3 | RNVC: 2
VG95148A15XM5X76-AL: RNCC: 3 | RNVC: 2

21 Feb 1985

5340-12-323-9899
Catch Strike

123239899
NO PRIMARY REF 12-323-9899: RNCC: 3 | RNVC: 2
ME57210-100000003: RNCC: 5 | RNVC: 9

15 Jan 1991

5340-12-383-9489
Access Cover

123839489
6.777-333.0: RNCC: 3 | RNVC: 2

28 Dec 2010

5340-12-336-7241
Dust And Moisture Seal Protective Plug

123367241
HP-020-6-73-KU: RNCC: 3 | RNVC: 2
HP020-6-73-KU: RNCC: 5 | RNVC: 2
HP020-6-73: RNCC: 5 | RNVC: 9

14 Dec 1994

5340-12-190-0349
Webbing Strap

121900349
5801445-30520: RNCC: 2 | RNVC: 2
221-00-424-3: RNCC: 3 | RNVC: 2
5801445-30520: RNCC: 3 | RNVC: 2
5801445-30520: RNCC: 3 | RNVC: 2
5801445-30520: RNCC: 3 | RNVC: 2
221-00-424-3: RNCC: 5 | RNVC: 9
5801445-30520: RNCC: 5 | RNVC: 9
5801445-30520: RNCC: 5 | RNVC: 9
5801445-30520: RNCC: 5 | RNVC: 9

4 Nov 1981

5340-12-701-5819
Angle Bracket

127015819
VG95211-ML-127015819: RNCC: 2 | RNVC: 2
5.12.6409.1500.43: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-378-3477
Mounting Plate

123783477
5559223: RNCC: 3 | RNVC: 2

30 Mar 2009

5340-12-361-6754
Dust And Moisture Seal Protective Plug

123616754
KB200/SCHWARZ: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-12-345-8816
Threaded Rod End

123458816
6937-940.01#400: RNCC: 3 | RNVC: 2
6937-940.01#400: RNCC: 3 | RNVC: 9

11 May 1998

5340-12-305-2044
Manual Control Handle

123052044
305.6: RNCC: 3 | RNVC: 2
P209271502471062: RNCC: 5 | RNVC: 2

8 Oct 1985

5340-12-162-3818
Spring Tension Clip

121623818
4-69033: RNCC: 3 | RNVC: 2
4-69033: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-166-9286
Dust And Moisture Seal Protective Plug

121669286
7315 240 105: RNCC: 3 | RNVC: 2
7315240105: RNCC: 5 | RNVC: 2
1018200: RNCC: 5 | RNVC: 2
02961913: RNCC: 5 | RNVC: 2
7315 240 105: RNCC: 5 | RNVC: 9
7315240105: RNCC: 5 | RNVC: 9

6 Nov 1976

5340-12-341-1966
Handwheel

123411966
0101220136: RNCC: 3 | RNVC: 2
0101 220 136: RNCC: 5 | RNVC: 2
12.007 125MM POS 6: RNCC: 5 | RNVC: 2

8 Aug 1996

5340-12-345-9213
Angle Bracket

123459213
160.03.0056: RNCC: 3 | RNVC: 2

18 May 1998

5340-12-364-2289
Loop Clamp Kit

123642289
9069970190: RNCC: 3 | RNVC: 2

2 Sep 2004

5340-12-369-6783
Mounting Plate

123696783
863814302: RNCC: 3 | RNVC: 2

8 Aug 2006

5340-12-319-9224
Spring Tension Clip

123199224
192153: RNCC: 3 | RNVC: 2

17 Nov 1989

5340-12-326-1840
Dust And Moisture Seal Protective Cap

123261840
8090 040 108: RNCC: 3 | RNVC: 2
100CP4349: RNCC: 5 | RNVC: 2
81960020445: RNCC: 5 | RNVC: 2
8090 040 108: RNCC: 5 | RNVC: 2

15 Aug 1991

5340-12-337-4557
Mounting Plate

123374557
03926200: RNCC: 3 | RNVC: 2

7 Mar 1995

5340-12-358-5478
Double Angle Bracket

123585478
5411800140: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-12-359-3460
Lock-Release Lever

123593460
866401903: RNCC: 3 | RNVC: 2

27 Jan 2003

5340-12-393-0718
Block Clamp

123930718
0451754: RNCC: 3 | RNVC: 2
451745: RNCC: 5 | RNVC: 2

5 Aug 2013

5340-12-400-3350

5340-12-408-7210

5340-12-307-0788
Angle Bracket

123070788
151-252000-902-0: RNCC: 3 | RNVC: 2

6 May 1986

5340-12-362-3075
Loop Clamp

123623075
LN9490BK60: RNCC: 2 | RNVC: 2

5 Feb 2004

5340-12-349-7835
Retaining Strap

123497835
T290M3203216: RNCC: 3 | RNVC: 2

7 Jan 2000

5340-12-360-4109
Access Cover

123604109
1834461200: RNCC: 3 | RNVC: 2
1834461200: RNCC: 5 | RNVC: 2

19 May 2003

5340-12-022-0887

5340-12-300-9862
Angle Bracket

123009862
5802281-3400.00: RNCC: 2 | RNVC: 2
7802035340: RNCC: 3 | RNVC: 2
5802281-3400: RNCC: 5 | RNVC: 9
78020 35340: RNCC: 5 | RNVC: 9

15 Sep 1984

5340-12-175-8750
Clamping Catch

121758750
23111-4611.02: RNCC: 2 | RNVC: 2
1061631: RNCC: 3 | RNVC: 2
23111-4611.02: RNCC: 5 | RNVC: 2
23111-4611.02: RNCC: 5 | RNVC: 9
23111-4611-02: RNCC: 5 | RNVC: 9
23111-4611-02: RNCC: 5 | RNVC: 9
1061631: RNCC: 5 | RNVC: 9

23 Oct 1978

5340-12-377-5512
Mounting Bracket

123775512
8605059.3.080.03: RNCC: 3 | RNVC: 2

23 Jan 2009

5340-12-316-3762
Webbing Strap

123163762
113144: RNCC: 3 | RNVC: 2
400-848.1068.4: RNCC: 5 | RNVC: 2

13 Jan 1989

5340-12-393-0445
Retaining Band

123930445
120D035020.000.0: RNCC: 2 | RNVC: 2
120D035020.000.0: RNCC: 3 | RNVC: 2

1 Aug 2013

5340-12-381-0129
Mounting Bracket

123810129
41242078: RNCC: 3 | RNVC: 2

22 Dec 2009

5340-12-359-9293
Manual Control Lever

123599293
0132 1213: RNCC: 3 | RNVC: 2
1421901178: RNCC: 3 | RNVC: 2

20 Mar 2003

5340-12-368-1331
Mounting Bracket

123681331
5161-390000A02B: RNCC: 2 | RNVC: 2
5161-390000A02B: RNCC: 3 | RNVC: 2

14 Dec 2005

5340-12-184-3249
Bow Handle

121843249
DL52MSCHRAUBEN3-16Z0LLX15: RNCC: 3 | RNVC: 2
DL52: RNCC: 5 | RNVC: 2

17 Jul 1980

5340-12-324-0333
Mending Plate

123240333
66.3579.110.02-A001: RNCC: 3 | RNVC: 2
66.3579.110.02: RNCC: 5 | RNVC: 2

17 Jan 1991

5340-12-384-8124
Mending Plate

123848124
PL566-2: RNCC: 3 | RNVC: 2

31 Mar 2011

5340-12-378-5023
Retaining Strap

123785023
700346 085100: RNCC: 3 | RNVC: 2

15 Apr 2009

5340-12-394-6405
Hose-Cable Hanger

123946405
539737: RNCC: 3 | RNVC: 2

2 Jan 2014

5340-12-702-3533
Angle Bracket

127023533
VG95211-ML-127023533: RNCC: 2 | RNVC: 2
4 OST1 10218-71: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-5243
Mounting Bracket

127015243
VG95211-ML-127015243: RNCC: 2 | RNVC: 2
5.12.6101.0210.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-8851
Angle Bracket

127018851
VG95211-ML-127018851: RNCC: 2 | RNVC: 2
975A-57-7: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-309-0069
Loop Clamp

123090069
DIN3016-1-A1-8X20-W1-2: RNCC: 2 | RNVC: 2
DIN3016-A1-8X20-W1-2: RNCC: 3 | RNVC: 2
RS1.8/20: RNCC: 3 | RNVC: 2
04110020008: RNCC: 5 | RNVC: 2
4110020008: RNCC: 5 | RNVC: 2
DIN3016-A1-8X20-W1-2: RNCC: 5 | RNVC: 9
VG95931-A8X20-W1: RNCC: 5 | RNVC: 9

5 Dec 1986

5340-12-331-2032
Access Cover

123312032
7068-35000-000-2: RNCC: 3 | RNVC: 2

1 Apr 1993

5340-12-701-6337
Angle Bracket

127016337
VG95211-ML-127016337: RNCC: 2 | RNVC: 2
5.12.7060.1230.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-359-8336
Threaded Rod End

123598336
2500261-185240.000.0: RNCC: 2 | RNVC: 2
2500261-185240.000.0: RNCC: 3 | RNVC: 2

13 Mar 2003

5340-12-371-4165
Access Cover

123714165
2500278-190400.005.0: RNCC: 3 | RNVC: 2

27 Mar 2007

5340-12-381-1633
Retaining Bail

123811633
6.971-137.0: RNCC: 3 | RNVC: 2

15 Jan 2010

5340-12-700-6281
Dust And Moisture Seal Boot

127006281
VG95211-ML-127006281: RNCC: 2 | RNVC: 2
5.12.6501.1481.98: RNCC: 3 | RNVC: 2
0501401422190: RNCC: 5 | RNVC: 2

30 Sep 1992

5340-12-312-6010
Bow Handle

123126010
2300216-182001.000.0: RNCC: 2 | RNVC: 2
2300216-182001.000.0: RNCC: 3 | RNVC: 2
604-58.76.001-19: RNCC: 3 | RNVC: 2

20 Jan 1988

5340-12-337-8944
Mounting Bracket

123378944
1602-101600.000.0: RNCC: 2 | RNVC: 2
1602-101600.000.0: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-12-391-9103
Clamping Catch

123919103
V951L02-1-5AGV: RNCC: 3 | RNVC: 2

18 Apr 2013

5340-12-350-1072
Angle Bracket

123501072
706-182100-901-0: RNCC: 3 | RNVC: 2

16 Feb 2000

5340-12-172-8281
Butt Hinge Leaf

121728281
4592038211: RNCC: 3 | RNVC: 2
2382-023300.02.0: RNCC: 5 | RNVC: 2
2382-023300-02-0: RNCC: 5 | RNVC: 2
2382-023300.02.0: RNCC: 5 | RNVC: 2
2382-023300.02.0: RNCC: 5 | RNVC: 2
2382-023300-02-0: RNCC: 5 | RNVC: 9
2382-023300.02.0: RNCC: 5 | RNVC: 9

27 Feb 1978

5340-12-182-6895
Loop Clamp

121826895
DIN3016-1-E1-10X12-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-E1-10X12-W1-2: RNCC: 3 | RNVC: 2
RSGU0.10/12: RNCC: 3 | RNVC: 2
RSGU10-12: RNCC: 5 | RNVC: 2
RSGU10/12: RNCC: 5 | RNVC: 2
9400012010: RNCC: 5 | RNVC: 2
VG95931-E10X12-W1: RNCC: 5 | RNVC: 9
VG95931E10X12W1: RNCC: 5 | RNVC: 9
DIN3016-E1-10X12-W1-2: RNCC: 5 | RNVC: 9

20 Feb 1980

5340-12-356-6990
Friction Catch Stud Receptacle

123566990
027034302: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-701-6474
Mounting Plate

127016474
VG95211-ML-127016474: RNCC: 2 | RNVC: 2
5.12.7204.4101.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-323-9405
Access Cover

123239405
060.20.0002: RNCC: 3 | RNVC: 2

10 Jan 1991

5340-12-177-8190
Angle Bracket

121778190
1000086-101200.06: RNCC: 2 | RNVC: 2
1000086-101200.06: RNCC: 3 | RNVC: 2
1000086-101200-06: RNCC: 5 | RNVC: 9
1000086-101200.06: RNCC: 5 | RNVC: 9
1000086-101200-06: RNCC: 5 | RNVC: 9
1000086-101200-06: RNCC: 5 | RNVC: 9

28 Feb 1979

5340-12-196-9974
Webbing Strap

121969974
4900059-111249.000.0: RNCC: 2 | RNVC: 2
01151-2-SCHLAUFE-FE280MM-LE530MM: RNCC: 3 | RNVC: 2
4900059-111249.000.0: RNCC: 3 | RNVC: 2
4900059-111249.000.0: RNCC: 3 | RNVC: 2
79057/SCHLAUFE-730-280: RNCC: 3 | RNVC: 2
4900059-111249.000.0: RNCC: 3 | RNVC: 2
4900059-111249.000.0: RNCC: 3 | RNVC: 2
4900059-111249-000-0: RNCC: 5 | RNVC: 2
4900059-111249.000.0: RNCC: 5 | RNVC: 9
DIN60060-2-25X280X530-C3/SCHLAUF: RNCC: 5 | RNVC: 9

8 Sep 1983

5340-12-320-0964
Mending Plate

123200964
218397-4000: RNCC: 3 | RNVC: 2

7 Dec 1989

5340-12-349-1899
Metal Grille

123491899
88521 15481: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-12-310-3198
Plug Button

123103198
1000104-212500.05: RNCC: 3 | RNVC: 2
1000104-212500.05: RNCC: 5 | RNVC: 9

11 May 1987

5340-12-183-6309
Metal Runner

121836309
02446969: RNCC: 3 | RNVC: 2
2446969ED5052-81: RNCC: 5 | RNVC: 2

6 May 1980

5340-12-393-8410
Mounting Plate

123938410
066440: RNCC: 3 | RNVC: 2

15 Oct 2013

5340-12-312-2400
Strap Hinge

123122400
100000065: RNCC: 2 | RNVC: 2
331287: RNCC: 3 | RNVC: 2
10 0000 065: RNCC: 5 | RNVC: 2
100000065: RNCC: 5 | RNVC: 2

8 Dec 1987

5340-12-194-2113
Catch Strike

121942113
5498945: RNCC: 3 | RNVC: 2
549.8945: RNCC: 5 | RNVC: 2

12 Oct 1982

5340-12-318-9031
Dust And Moisture Seal Protective Cap

123189031
434162: RNCC: 3 | RNVC: 2
434162: RNCC: 5 | RNVC: 2
434162: RNCC: 5 | RNVC: 9

24 Aug 1989

5340-12-357-3463
Door Button

123573463
5556803: RNCC: 3 | RNVC: 2

11 Jun 2002

5340-12-379-8801
Lock-Release Lever

123798801
390200: RNCC: 3 | RNVC: 2

9 Sep 2009

5340-12-371-7941
Multiple Angle Bracket

123717941
7003876: RNCC: 3 | RNVC: 2

16 May 2007

5340-12-328-9187
Nonmetallic Bumper

123289187
VG95092B10X5X16X4X8NR60: RNCC: 2 | RNVC: 2
17.51.170: RNCC: 5 | RNVC: 2
20H190: RNCC: 5 | RNVC: 2
921: RNCC: 5 | RNVC: 9

1 Jul 1992

5340-12-306-4902
Angle Bracket

123064902
8450036517: RNCC: 3 | RNVC: 2
84500 36517: RNCC: 5 | RNVC: 9

5 Mar 1986

5340-12-388-8821
Access Cover

123888821
5820150409: RNCC: 3 | RNVC: 2

3 May 2012

5340-12-352-2140
Angle Bracket

123522140
T531M4521229: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-12-352-2136
Angle Bracket

123522136
T251M3007205: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-12-326-6572
Spring Tension Clip

123266572
957-811100.08.0: RNCC: 3 | RNVC: 2

18 Oct 1991

5340-12-701-2481
Mounting Bracket

127012481
VG95211-ML-127012481: RNCC: 2 | RNVC: 2
5.12.3600.3190.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-199-1368
Pad Eye

121991368
7860350-0200.01: RNCC: 3 | RNVC: 2
3528024001: RNCC: 3 | RNVC: 2
53.3031.241.01: RNCC: 5 | RNVC: 2
53.3031.241.01: RNCC: 5 | RNVC: 9
35280 24001: RNCC: 5 | RNVC: 9

28 Mar 1984

5340-12-320-5336
Loop Clamp

123205336
DIN3015-Z-A-2-R-15-15-PP-W1: RNCC: 2 | RNVC: 2
SP215/15-PP-GD-AS: RNCC: 3 | RNVC: 2
HRZ2A15-15PP STMBL: RNCC: 3 | RNVC: 2
RBPR1-215/15: RNCC: 3 | RNVC: 2
RBPR1-215/15: RNCC: 5 | RNVC: 2
DIN3015-ZA2R-15-15PP-W1: RNCC: 5 | RNVC: 2

23 Jan 1990

5340-12-304-7990
Double Angle Bracket

123047990
15150-08-74-312-00-0: RNCC: 3 | RNVC: 2
15150-08-74-312-00-0: RNCC: 5 | RNVC: 9
15150-08-74-312-00-0: RNCC: 5 | RNVC: 9

26 Aug 1985

5340-12-384-3659
Spacing Threaded Standoff

123843659
7010713-000210.02: RNCC: 3 | RNVC: 2
SK1034-003030.002.0: RNCC: 3 | RNVC: 2
7106615: RNCC: 5 | RNVC: 2

17 Feb 2011

5340-12-701-1769
Mounting Bracket

127011769
VG95211-ML-127011769: RNCC: 2 | RNVC: 2
5.12.0246.0260.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-182-8125
Loop Clamp

121828125
DIN3016-D2-12-12-12-12X20-W1-2: RNCC: 2 | RNVC: 2
DIN3016-D2-12-12-12-12X20-W1-2: RNCC: 3 | RNVC: 2
RSGU1.4X12/20-W1: RNCC: 3 | RNVC: 2
4219420012: RNCC: 5 | RNVC: 2
RSGU1.4X12/20: RNCC: 5 | RNVC: 2
RSGU1100.4X12/20: RNCC: 5 | RNVC: 2
RSGU1100-4X12-20: RNCC: 5 | RNVC: 9

27 Feb 1980

5340-12-303-6210
Nonmetallic Bumper

123036210
704-125251-903-0: RNCC: 3 | RNVC: 2

15 Apr 1985

5340-12-702-4186
Angle Bracket

127024186
VG95211-ML-127024186: RNCC: 2 | RNVC: 2
5.12.7060.1450.14: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-1826
Angle Bracket

127011826
VG95211-ML-127011826: RNCC: 2 | RNVC: 2
5.12.0300.3900.38: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-143-6313
Handle Grip

121436313
NO PRIMARY REF 12-143-6313: RNCC: 3 | RNVC: 2
DIN71903-E: RNCC: 5 | RNVC: 9
EDIN71903: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-196-1817
Gummi- Riemen

121961817
2300109-184441.000.0: RNCC: 2 | RNVC: 2
82300-2300109-184441.000.0: RNCC: 3 | RNVC: 2
2300109-184441.000.0: RNCC: 3 | RNVC: 2
2300109-184441.000.0: RNCC: 5 | RNVC: 2
2300109-184441.000.0: RNCC: 5 | RNVC: 9
82300-E300X20-NBR-STZN-OG: RNCC: 6 | RNVC: 9

8 Jun 1983

5340-12-309-5447
Angle Bracket

123095447
A-231197-005: RNCC: 3 | RNVC: 2
A231197-005: RNCC: 5 | RNVC: 2

3 Feb 1987

5340-12-700-9024
Mounting Plate

127009024
VG95211-ML-127009024: RNCC: 2 | RNVC: 2
2.11.6100.8104.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-322-5071
Spring Loaded Cylinder Fastener

123225071
101-365013-000-0: RNCC: 2 | RNVC: 2
101-365013-000-0: RNCC: 3 | RNVC: 2

28 Aug 1990

5340-12-166-6197
Sicherheits Schlosz

121666197
0123 0152: RNCC: 3 | RNVC: 2
1214348UE8935-38: RNCC: 5 | RNVC: 2
1230152KZ8935-38: RNCC: 5 | RNVC: 2
N92214Q3: RNCC: 5 | RNVC: 2
1230152: RNCC: 5 | RNVC: 9

28 Sep 1976

Load More Results