What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 117 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 117 of 178

5340-12-393-1863
Mounting Plate

123931863
06.66030-0301: RNCC: 3 | RNVC: 2
06.66030-0301: RNCC: 5 | RNVC: 2

15 Aug 2013

5340-12-366-4410
Angle Bracket

123664410
J52430815-401: RNCC: 3 | RNVC: 2

26 Apr 2005

5340-12-309-8536
Snap Hook

123098536
DIN5299-C80BK-1.4401: RNCC: 2 | RNVC: 2
DIN5299-C80BK-1.4571: RNCC: 2 | RNVC: 2
DIN5299-C80BK-1.4401: RNCC: 3 | RNVC: 2
DIN5299-C80BK-1.4571: RNCC: 3 | RNVC: 2
245 I-80X8: RNCC: 3 | RNVC: 9
245 IR-80X8: RNCC: 3 | RNVC: 9
90012011: RNCC: 5 | RNVC: 2
DIN5299-C80-1.4571: RNCC: 5 | RNVC: 2

11 Mar 1987

5340-12-335-2691
Pipe Hanger

123352691
6100146-500001.000.0: RNCC: 2 | RNVC: 2
6100146-500001.000.0: RNCC: 3 | RNVC: 2
6100146-500001.000.0: RNCC: 5 | RNVC: 2

2 Aug 1994

5340-12-700-8306
Retaining Band

127008306
VG95211-ML-127008306: RNCC: 2 | RNVC: 2
1 POL-20 GOST 2162-78: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-361-3342
Angle Bracket

123613342
51116400207: RNCC: 3 | RNVC: 2
51.11640-0207: RNCC: 5 | RNVC: 2

18 Sep 2003

5340-12-162-8829
Angle Bracket

121628829
22 017-002: RNCC: 3 | RNVC: 2
22017-002: RNCC: 5 | RNVC: 2
E22017-002: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-702-0034
Loop Clamp

127020034
VG95211-ML-127020034: RNCC: 2 | RNVC: 2
1667S50-31: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-172-0653
Handle Grip

121720653
1000078-322000.01: RNCC: 2 | RNVC: 2
1000078-322000-01: RNCC: 5 | RNVC: 2
1000078-322000.01: RNCC: 5 | RNVC: 2
1000078-322000-01: RNCC: 5 | RNVC: 9
1000078-322000.01: RNCC: 5 | RNVC: 9
1000078-322000-01: RNCC: 5 | RNVC: 9
1000078-322000.01: RNCC: 5 | RNVC: 9

19 Dec 1977

5340-12-341-1641
Mounting Bracket

123411641
227941-4000: RNCC: 3 | RNVC: 2
2279414000: RNCC: 5 | RNVC: 2

2 Aug 1996

5340-12-182-4615
Retaining Strap

121824615
5801506-5550.000: RNCC: 2 | RNVC: 2
2211028041: RNCC: 3 | RNVC: 2
5801506-5550-000: RNCC: 5 | RNVC: 2
5801506-5550-000: RNCC: 5 | RNVC: 9
22110 28041: RNCC: 5 | RNVC: 9
22110-28041: RNCC: 5 | RNVC: 9

4 Feb 1980

5340-12-320-5904
Dust And Moisture Seal Protective Cap

123205904
010321227: RNCC: 3 | RNVC: 2
010-321-227: RNCC: 5 | RNVC: 2
010-321-227: RNCC: 5 | RNVC: 2

29 Jan 1990

5340-12-181-2294
Mounting Bracket

121812294
5900046-1510-01: RNCC: 2 | RNVC: 2
21-1510-01: RNCC: 3 | RNVC: 2
5900046-1510-01: RNCC: 5 | RNVC: 9
21-1510-01: RNCC: 5 | RNVC: 9

5 Nov 1979

5340-12-368-9405
Mounting Plate

123689405
1985610: RNCC: 3 | RNVC: 2

8 May 2006

5340-12-377-1951
Mounting Plate

123771951
310323: RNCC: 3 | RNVC: 2

16 Dec 2008

5340-12-377-2474
Corrosion Preventive Anode

123772474
271010043: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-12-384-6057
Mounting Plate

123846057
518546: RNCC: 3 | RNVC: 2

11 Mar 2011

5340-12-362-1616
Rim Lock

123621616
3842525821: RNCC: 3 | RNVC: 2

19 Jan 2004

5340-12-700-9017
Mounting Bracket

127009017
VG95211-ML-127009017: RNCC: 2 | RNVC: 2
2.11.6100.3745.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-122-2376

5340-12-392-2189
Block Clamp

123922189
S880M00X1001: RNCC: 1 | RNVC: 2
S880M00X1001: RNCC: 3 | RNVC: 2

16 May 2013

5340-12-375-5838
Access Cover

123755838
L311M1022205: RNCC: 3 | RNVC: 2

16 Jun 2008

5340-12-302-0627
Double Angle Bracket

123020627
3818300026: RNCC: 3 | RNVC: 2

29 Nov 1984

5340-12-337-9555
Mounting Bracket

123379555
4602401: RNCC: 3 | RNVC: 2
EZ46024: RNCC: 5 | RNVC: 2

4 May 1995

5340-12-353-1564
Mounting Plate

123531564
5062230441: RNCC: 3 | RNVC: 2
506 223 04 41: RNCC: 5 | RNVC: 2

5 Feb 2001

5340-12-341-0181
Helical Compression Spring Seat

123410181
81434315016: RNCC: 3 | RNVC: 2
81.43431.5016: RNCC: 5 | RNVC: 2

17 Jul 1996

5340-12-309-4078
Mending Plate

123094078
WG 409 178: RNCC: 2 | RNVC: 2
WG 409 178: RNCC: 3 | RNVC: 9

22 Jan 1987

5340-12-091-4480

5340-12-090-2112

5340-12-322-2032
Door Holder

123222032
40 0165 667: RNCC: 2 | RNVC: 2
40 0165 667: RNCC: 3 | RNVC: 2
40 0165 667: RNCC: 5 | RNVC: 9

1 Aug 1990

5340-12-357-3345
Mounting Bracket

123573345
8812370340: RNCC: 2 | RNVC: 2
8812370340: RNCC: 3 | RNVC: 2

10 Jun 2002

5340-12-367-6748
Dust And Moisture Seal Protective Plug

123676748
04000800: RNCC: 3 | RNVC: 2

22 Sep 2005

5340-12-322-2328
Mounting Bracket

123222328
272.308 582: RNCC: 2 | RNVC: 2
272.308.582: RNCC: 3 | RNVC: 2
272.308 582: RNCC: 5 | RNVC: 9

3 Aug 1990

5340-12-310-4326
Pad Eye

123104326
4355510343: RNCC: 3 | RNVC: 2

21 May 1987

5340-12-303-2945
Resilient Mount

123032945
1152411465: RNCC: 3 | RNVC: 2

13 Mar 1985

5340-12-320-4403
Dust And Moisture Seal Protective Plug

123204403
620U20B: RNCC: 3 | RNVC: 2
GPN620,U20B: RNCC: 5 | RNVC: 9

15 Jan 1990

5340-12-026-4600

5340-12-195-4301

5340-12-136-5770

5340-12-330-7997
Extension Drawer Slide Section

123307997
AZ4021G010: RNCC: 3 | RNVC: 2
AZ4021G010: RNCC: 5 | RNVC: 9

10 Feb 1993

5340-12-394-5110
Mounting Bracket

123945110
7867011218AA: RNCC: 2 | RNVC: 2
7867011218AA: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-12-091-7275

5340-12-310-1385
Mending Plate

123101385
E4-2052960: RNCC: 2 | RNVC: 2
E4-2052960: RNCC: 3 | RNVC: 2
E4-2052960: RNCC: 5 | RNVC: 9

10 Apr 1987

5340-12-321-8575
Access Cover

123218575
5555-02-016.001: RNCC: 3 | RNVC: 2
03442352: RNCC: 5 | RNVC: 2

3 Jul 1990

5340-12-317-5462
Double Angle Bracket

123175462
C320-A75-B13: RNCC: 3 | RNVC: 2

18 Apr 1989

5340-12-345-0919
Flush Lock

123450919
1000-U224: RNCC: 3 | RNVC: 2
1000U224: RNCC: 5 | RNVC: 2
91729841: RNCC: 5 | RNVC: 2

28 Jan 1998

5340-12-185-3697
Loop Clamp

121853697
1718-5-0-409: RNCC: 3 | RNVC: 2

30 Sep 1980

5340-12-198-7825
Mending Plate

121987825
1686-492000.14: RNCC: 3 | RNVC: 2
1686-492000-14: RNCC: 5 | RNVC: 2
1686-492000.14: RNCC: 5 | RNVC: 9

27 Feb 1984

5340-12-181-3623
Mounting Plate

121813623
AZ9500T112: RNCC: 3 | RNVC: 2
AZ9500T112: RNCC: 5 | RNVC: 9
AZ9500T112: RNCC: 5 | RNVC: 9
1200072-020120-112: RNCC: 5 | RNVC: 9
1200072-020120.112: RNCC: 5 | RNVC: 9

19 Nov 1979

5340-12-150-3466
Angle Bracket

121503466
C20234-A18-C55: RNCC: 3 | RNVC: 2
C20234A18C55: RNCC: 5 | RNVC: 2
TFS72-63055: RNCC: 5 | RNVC: 9
TLOCH18T55: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-333-5149
Nonmetallic Bumper

123335149
1087680095: RNCC: 3 | RNVC: 2
108-768-0095: RNCC: 5 | RNVC: 2
108 768 00 95: RNCC: 5 | RNVC: 2

28 Dec 1993

5340-12-173-4564
Retaining Strap

121734564
LN29836B1-20: RNCC: 2 | RNVC: 2

18 Apr 1978

5340-12-179-1944
Mounting Bracket

121791944
SC0-6256: RNCC: 3 | RNVC: 2
0019941745: RNCC: 5 | RNVC: 2

15 Jun 1979

5340-12-320-7738
Mounting Bracket

123207738
335909-0801.000: RNCC: 2 | RNVC: 2
335909-0801.000: RNCC: 3 | RNVC: 2
335909-0801.000: RNCC: 5 | RNVC: 9

15 Feb 1990

5340-12-190-8161
Dust And Moisture Seal Protective Cap

121908161
E4-2014070: RNCC: 3 | RNVC: 2
E4-2014070: RNCC: 5 | RNVC: 9
E4-2014070: RNCC: 5 | RNVC: 9

16 Dec 1981

5340-12-349-5859
Access Cover

123495859
U60.281000.12-00: RNCC: 3 | RNVC: 2

7 Dec 1999

5340-12-374-9627
Mending Plate

123749627
279.660 301: RNCC: 2 | RNVC: 2
279.660 301: RNCC: 3 | RNVC: 2

9 Apr 2008

5340-12-178-4147
Nonmetallic Bumper

121784147
2300109-034200.001.0: RNCC: 2 | RNVC: 2
2300109-034200.001.0: RNCC: 3 | RNVC: 2
2300109-034200-001-0: RNCC: 5 | RNVC: 2
2300109-034200.001.0: RNCC: 5 | RNVC: 2
2300109-034200-001-0: RNCC: 5 | RNVC: 2
2300109-034200-001-0: RNCC: 5 | RNVC: 9
2300109-034200.001.0: RNCC: 5 | RNVC: 9

20 Apr 1979

5340-12-344-3991
Mounting Bracket

123443991
P-296883-091: RNCC: 3 | RNVC: 2
P296883-091: RNCC: 5 | RNVC: 2

23 Oct 1997

5340-12-318-0461
Mending Plate

123180461
1000192-02 0 31000.12: RNCC: 2 | RNVC: 2
1000192-02 0 31000.12: RNCC: 3 | RNVC: 2
1000192-02 0 31000.12: RNCC: 5 | RNVC: 9
10003-02 0 31000.12: RNCC: 5 | RNVC: 9
10003-02 0 31000.12: RNCC: 5 | RNVC: 9

7 Jun 1989

5340-12-326-3814
Suction Cup

123263814
VC916S-3/8": RNCC: 3 | RNVC: 2
VENTOUSE3-8: RNCC: 5 | RNVC: 2
91712583: RNCC: 5 | RNVC: 2

9 Sep 1991

5340-12-335-2610
Nonmetallic Bumper

123352610
DIN95364-A75X36-M12X37-NR55ST: RNCC: 2 | RNVC: 2
530064-M12X37.NR55.ST: RNCC: 5 | RNVC: 2
25 327/D: RNCC: 5 | RNVC: 2
25327/D-BSTN5590: RNCC: 5 | RNVC: 2
VG95364-A75X36-M12X37-NR55ST: RNCC: 5 | RNVC: 9

1 Aug 1994

5340-12-166-0448
Hand Crank

121660448
100429-31020.16.0: RNCC: 2 | RNVC: 2
100429-31020.16.0: RNCC: 3 | RNVC: 2
100429-31020-16-0: RNCC: 5 | RNVC: 2
100429-31020-16-0: RNCC: 5 | RNVC: 9

29 Jul 1976

5340-12-173-3607
Loop Clamp

121733607
1121-60921.03: RNCC: 3 | RNVC: 2
1121-60921-03: RNCC: 5 | RNVC: 2

10 Apr 1978

5340-12-365-3888
Runner

123653888
5161-211112A04B: RNCC: 2 | RNVC: 2
5161-211112A04B: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-12-315-2096
Electrical-Mechanical Equipment Post

123152096
NO PRIMARY REF 12-315-2096: RNCC: 3 | RNVC: 2
7801 167972: RNCC: 5 | RNVC: 9

1 Oct 1988

5340-12-357-1430
Mounting Plate

123571430
J04532272-001: RNCC: 3 | RNVC: 2

13 May 2002

5340-12-182-9311
Hand Crank

121829311
RH13158-180: RNCC: 3 | RNVC: 2

8 Mar 1980

5340-12-186-2064
Double Angle Bracket

121862064
23290-063023: RNCC: 2 | RNVC: 2

6 Dec 1980

5340-12-356-6326
Angle Bracket

123566326
J92220324-003: RNCC: 3 | RNVC: 2

19 Mar 2002

5340-12-192-8499
Webbing Strap

121928499
8-4141.00: RNCC: 2 | RNVC: 2
8-4141.00: RNCC: 3 | RNVC: 2
8-4141.00: RNCC: 5 | RNVC: 9
8-4141.00: RNCC: 5 | RNVC: 9
8-4141-00: RNCC: 5 | RNVC: 9
000-F2-25X2,3X350-BW-RAL6031: RNCC: 6 | RNVC: 9

27 May 1982

5340-12-360-0914
Mounting Bracket

123600914
2500261-183400.003.0: RNCC: 2 | RNVC: 2
2500261-183400.003.0: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-386-6048
Access Cover

123866048
4000A-310413.001.0: RNCC: 3 | RNVC: 2

15 Sep 2011

5340-12-359-7899
Dust And Moisture Seal Protective Plug

123597899
MD-007-5-74-KU: RNCC: 3 | RNVC: 2

11 Mar 2003

5340-12-198-4999
Helical Compression Spring Seat

121984999
K.84.4122.01: RNCC: 3 | RNVC: 2
K84-4122-01: RNCC: 5 | RNVC: 2
721291: RNCC: 5 | RNVC: 2
5172129100: RNCC: 5 | RNVC: 2

2 Feb 1984

5340-12-380-0178
Loop Clamp

123800178
DIN3016-1-E2-16-21X20-W1-2-NBR: RNCC: 2 | RNVC: 2

18 Sep 2009

5340-12-341-8362
Nonmetallic Bumper

123418362
9847309: RNCC: 3 | RNVC: 9
393-206070.009: RNCC: 5 | RNVC: 2
393-206070.009: RNCC: 5 | RNVC: 9

1 Nov 1996

5340-12-339-0349
Access Cover

123390349
MM 2440 T 006: RNCC: 3 | RNVC: 2
02655: RNCC: 5 | RNVC: 9
MM 2440 T 006: RNCC: 5 | RNVC: 9
MM 2440 T 006-4: RNCC: 5 | RNVC: 9

29 Sep 1995

5340-12-319-2680
Mounting Plate

123192680
2654-332220.01: RNCC: 2 | RNVC: 2
2654-332220.01: RNCC: 3 | RNVC: 2
679-02011102.01: RNCC: 5 | RNVC: 9
679-02011102.01: RNCC: 5 | RNVC: 9
2654-332 220.01: RNCC: 5 | RNVC: 9

18 Sep 1989

5340-12-315-4082
Access Cover

123154082
4900153-11114-00-12: RNCC: 3 | RNVC: 2
4900153-11114-10: RNCC: 5 | RNVC: 9

20 Oct 1988

5340-12-175-1193
Dust And Moisture Seal Protective Plug

121751193
4A84823: RNCC: 3 | RNVC: 2
81960020153: RNCC: 5 | RNVC: 2
02980717: RNCC: 5 | RNVC: 2
2980717EY5077-28: RNCC: 5 | RNVC: 2

28 Aug 1978

5340-12-333-4726
Clamping Catch

123334726
91-361-07: RNCC: 3 | RNVC: 2
TL110-AX: RNCC: 5 | RNVC: 9

21 Dec 1993

5340-12-349-7650
Nonmetallic Bumper

123497650
U60.100000.06-00: RNCC: 3 | RNVC: 2

6 Jan 2000

5340-12-356-3767
Support Hook

123563767
JM0400000H524-001A0: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-12-199-0579
Retaining Strap

121990579
EUL5840-01252: RNCC: 3 | RNVC: 2

22 Mar 1984

5340-12-701-8452
Loop Clamp

127018452
VG95211-ML-127018452: RNCC: 2 | RNVC: 2
5149A-60: RNCC: 3 | RNVC: 2
0500812925919: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-314-1784
Loop Clamp

123141784
6100127-3200.23: RNCC: 2 | RNVC: 2
120006: RNCC: 3 | RNVC: 2
CN9: RNCC: 5 | RNVC: 2
8791312065: RNCC: 5 | RNVC: 9
8791312065: RNCC: 5 | RNVC: 9

15 Jun 1988

5340-12-348-0790
Nonmetallic Bumper

123480790
1000096-35.07: RNCC: 2 | RNVC: 2
204601: RNCC: 3 | RNVC: 2
204 601: RNCC: 5 | RNVC: 2

9 Apr 1999

5340-12-172-8324
Butt Hinge Leaf

121728324
2500009-0109.00: RNCC: 2 | RNVC: 2
2500009-0109.00: RNCC: 3 | RNVC: 2
2500009-0109.00: RNCC: 3 | RNVC: 2
2500009-0109-00: RNCC: 5 | RNVC: 9
2500009-0109-00: RNCC: 5 | RNVC: 9
2500009-0109.00: RNCC: 5 | RNVC: 9
2500009-0109-00: RNCC: 5 | RNVC: 9

27 Feb 1978

5340-12-180-8858
Mounting Plate

121808858
2500035-122000.01: RNCC: 2 | RNVC: 2
2500035-122000.01: RNCC: 3 | RNVC: 2
2500035-122000-01: RNCC: 5 | RNVC: 9
2500035-122000.01: RNCC: 5 | RNVC: 9
2500035-122000-01: RNCC: 5 | RNVC: 9

11 Oct 1979

5340-12-141-9472
Antipilferage Seal

121419472
0121 5448: RNCC: 3 | RNVC: 2
0121 5448: RNCC: 5 | RNVC: 2
938R: RNCC: 5 | RNVC: 2
938R: RNCC: 5 | RNVC: 2
1215448EF8929-64: RNCC: 5 | RNVC: 2
1215448EF8928-64: RNCC: 5 | RNVC: 2
1215448: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-366-0364
Mounting Bracket

123660364
9414310742: RNCC: 3 | RNVC: 2

2 Mar 2005

5340-12-360-0963
Mounting Plate

123600963
9418680192: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-365-0360
Dust And Moisture Seal Protective Plug

123650360
60571: RNCC: 3 | RNVC: 2

24 Nov 2004

5340-12-345-4962
Dust And Moisture Seal Protective Plug

123454962
N05 000 660: RNCC: 3 | RNVC: 2

24 Mar 1998

5340-12-198-2426
Angle Bracket

121982426
66.3851.530.05-A001: RNCC: 3 | RNVC: 2
168957: RNCC: 5 | RNVC: 2

5 Jan 1984

5340-12-188-9175
Angle Bracket

121889175
BN19129: RNCC: 3 | RNVC: 2
019129: RNCC: 5 | RNVC: 2

10 Aug 1981

5340-12-167-5174
Rubber Bumper

121675174
113501737A: RNCC: 3 | RNVC: 9

28 Dec 1976

5340-12-300-6754
Mending Plate

123006754
4359377211: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-180-4700
Mounting Bracket

121804700
3818111136: RNCC: 3 | RNVC: 2

12 Sep 1979

5340-12-370-7907
Hand Crank

123707907
BHAA 030: RNCC: 3 | RNVC: 2

21 Dec 2006

5340-12-181-4596
Spring Tension Clip

121814596
4496VSND: RNCC: 3 | RNVC: 2
01242017: RNCC: 5 | RNVC: 2
1242017EZ8935-37: RNCC: 5 | RNVC: 2
N92315Y: RNCC: 5 | RNVC: 2

26 Nov 1979

5340-12-321-1231
Mounting Bracket

123211231
3098100614: RNCC: 3 | RNVC: 2

29 Mar 1990

5340-12-330-2105
Rod End Clevis

123302105
10365301: RNCC: 3 | RNVC: 2
35632040: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-12-301-0649
Pad Eye

123010649
54.0028.100.10: RNCC: 3 | RNVC: 2

20 Sep 1984

5340-12-198-6901
Clamping Catch

121986901
27 0323 265: RNCC: 2 | RNVC: 2
9859241: RNCC: 3 | RNVC: 9
27 0323 265: RNCC: 5 | RNVC: 2
27 0323 265: RNCC: 5 | RNVC: 9
270323265: RNCC: 5 | RNVC: 9

17 Feb 1984

5340-12-170-2506
Retaining Strap

121702506
PAN4231D2020: RNCC: 3 | RNVC: 2

5 Jul 1977

5340-12-316-2906
Rod End Clevis

123162906
6384546: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-316-8266
Cane Bolt

123168266
2300279-9701.04: RNCC: 2 | RNVC: 2
2300279-9701.04: RNCC: 3 | RNVC: 2
2300279-9701.04: RNCC: 5 | RNVC: 9

16 Feb 1989

5340-12-375-5279
Butt Hinge Leaf

123755279
T14936: RNCC: 3 | RNVC: 2

11 Jun 2008

5340-12-197-5023
Angle Bracket

121975023
64453098: RNCC: 3 | RNVC: 2
5801352-7360-02: RNCC: 5 | RNVC: 9
5801352-7360.02: RNCC: 5 | RNVC: 9
4453/098: RNCC: 5 | RNVC: 9
5801352-7360-02: RNCC: 5 | RNVC: 9
5801352-7360.02: RNCC: 5 | RNVC: 9

27 Oct 1983

5340-12-134-1122
Loop Clamp

121341122
03432628: RNCC: 3 | RNVC: 2
0343 2628: RNCC: 5 | RNVC: 2
3432628EE5034-71: RNCC: 5 | RNVC: 2
5167-71-22-01: RNCC: 5 | RNVC: 2
5167-71-22.01: RNCC: 5 | RNVC: 2
E5167-71-22-01: RNCC: 5 | RNVC: 2
3432628: RNCC: 5 | RNVC: 2
5167-71-22-01: RNCC: 5 | RNVC: 2
3432628: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-186-2639
Halter

121862639
512206-0340-000: RNCC: 3 | RNVC: 2
512206-0340.000: RNCC: 3 | RNVC: 2
512206-0340: RNCC: 5 | RNVC: 2

11 Dec 1980

5340-12-184-3364
Support Hook

121843364
100000537: RNCC: 2 | RNVC: 2
100000537: RNCC: 3 | RNVC: 2
5801357-1800.27: RNCC: 5 | RNVC: 2
5801357-1800.27: RNCC: 5 | RNVC: 9
5801357-1800-27: RNCC: 5 | RNVC: 9
5801357-1800-27: RNCC: 5 | RNVC: 9
5801357-1800-27: RNCC: 5 | RNVC: 9

17 Jul 1980

5340-12-338-1087
Retaining Strap

123381087
160-76186: RNCC: 3 | RNVC: 2
15160-76186: RNCC: 5 | RNVC: 2
160-76186: RNCC: 5 | RNVC: 9

23 May 1995

5340-12-393-1721
Rod End Clevis

123931721
1030105-202000.003.0: RNCC: 3 | RNVC: 2

14 Aug 2013

5340-12-314-5220
Nonmetallic Bumper

123145220
C 3695 641: RNCC: 2 | RNVC: 2
VG95092B6X4X12X3X6NR60: RNCC: 2 | RNVC: 2
842.2.006.012.003.NR60: RNCC: 3 | RNVC: 2
C 3695 641: RNCC: 5 | RNVC: 2
C 3695 641: RNCC: 5 | RNVC: 2

15 Jul 1988

5340-12-336-9752
Mounting Plate

123369752
2782-380000.002.0: RNCC: 2 | RNVC: 2
2782-380000.002.0: RNCC: 3 | RNVC: 2

4 Jan 1995

5340-12-159-8647
Pipe Bracket

121598647
RS1.28/15A: RNCC: 3 | RNVC: 2
4510015028: RNCC: 5 | RNVC: 2
RS1100-28-15A: RNCC: 5 | RNVC: 2
RS1100.28/15A: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-343-5558
Swivel Caster

123435558
LDA-VPA 50 G-RF-FA: RNCC: 3 | RNVC: 2
LDA-VPA50G-RF-FA: RNCC: 5 | RNVC: 2

3 Jul 1997

5340-12-194-4083
Nonmetallic Bumper

121944083
A-616832-009: RNCC: 3 | RNVC: 2
A616832-009: RNCC: 5 | RNVC: 2

3 Nov 1982

5340-12-308-3246
Retaining Strap

123083246
701-732 000.04.0: RNCC: 3 | RNVC: 2
701-732 000.04.0: RNCC: 5 | RNVC: 9

26 Sep 1986

5340-12-702-5423
Mounting Bracket

127025423
VG95211-ML-127025423: RNCC: 2 | RNVC: 2
5.51.7210.0620.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-188-8023
Detent Plunger

121888023
2300109-288700.004.0: RNCC: 2 | RNVC: 2
2300109-288700.004.0: RNCC: 3 | RNVC: 2
2300109-288700.004.0: RNCC: 3 | RNVC: 2
2300109-288700.004.0: RNCC: 5 | RNVC: 9
2300109-288700-004-0: RNCC: 5 | RNVC: 9
2300109-288700-004-0: RNCC: 5 | RNVC: 9
2300109-288700-004-0: RNCC: 5 | RNVC: 9

30 Jul 1981

5340-12-324-0661
Mounting Plate

123240661
23305-264173.01.0: RNCC: 2 | RNVC: 2
23305-264173.01.0: RNCC: 3 | RNVC: 2
23305-264173-01-0: RNCC: 5 | RNVC: 2

18 Jan 1991

5340-12-305-2579
Mending Plate

123052579
4900059-323438.000.0/3: RNCC: 3 | RNVC: 2
4900059-323438.003.0: RNCC: 5 | RNVC: 2

15 Oct 1985

5340-12-320-0330
Electrical-Mechanical Equipment Post

123200330
3512 712 37840: RNCC: 3 | RNVC: 2

30 Nov 1989

5340-12-359-0492
Pawl Fastener

123590492
00001026237: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-316-7480
Shimmy Damper

123167480
084743: RNCC: 3 | RNVC: 2
117552: RNCC: 5 | RNVC: 2
0235546D00: RNCC: 5 | RNVC: 2
91697698: RNCC: 5 | RNVC: 2

8 Feb 1989

5340-12-335-5818
Access Cover

123355818
347-210-018: RNCC: 2 | RNVC: 2
347-210-018: RNCC: 3 | RNVC: 2

1 Sep 1994

5340-12-363-8478
Mounting Bracket

123638478
J28230159-403: RNCC: 3 | RNVC: 2

30 Jul 2004

5340-12-316-0964
Dust And Moisture Seal Protective Plug

123160964
DIN470-42-ST-PHR: RNCC: 2 | RNVC: 2

21 Dec 1988

5340-12-351-6310
Manual Control Handle

123516310
232-082836: RNCC: 3 | RNVC: 2
10019881: RNCC: 5 | RNVC: 2

10 Aug 2000

5340-12-351-2168
Mounting Bracket

123512168
3099-00-132000.01: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-12-310-0084
Loop Clamp

123100084
0210 3634: RNCC: 3 | RNVC: 2
2103634: RNCC: 5 | RNVC: 2
02103634EE0150-41: RNCC: 5 | RNVC: 2

27 Mar 1987

5340-12-384-2989
Headless Straight Rod

123842989
NO PRIMARY REF 12-384-2989: RNCC: 3 | RNVC: 2
S80521-00: RNCC: 5 | RNVC: 2

10 Feb 2011

5340-12-338-4724
Nonmetallic Bumper

123384724
160-73888-10: RNCC: 3 | RNVC: 2
15160-73888.10: RNCC: 5 | RNVC: 2
160-73888-10: RNCC: 5 | RNVC: 9

14 Jul 1995

5340-12-389-0237
Loop Clamp

123890237
F1.1697-47-01-00.00-06: RNCC: 3 | RNVC: 2

16 May 2012

5340-12-702-2176
Mounting Bracket

127022176
VG95211-ML-127022176: RNCC: 2 | RNVC: 2
30.7223.20: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-369-9185
Lock-Release Lever

123699185
114058: RNCC: 2 | RNVC: 2
114058: RNCC: 3 | RNVC: 2

24 Aug 2006

5340-12-348-8548
Blank Panel

123488548
2300387-640230.002: RNCC: 2 | RNVC: 2
2300387-640230.002: RNCC: 3 | RNVC: 2
2300387-640230.002: RNCC: 5 | RNVC: 9

27 Aug 1999

5340-12-346-4822
Elbow Catch

123464822
2996.0570: RNCC: 3 | RNVC: 2
2996.05.70: RNCC: 5 | RNVC: 2

29 Jul 1998

5340-12-193-3308
Pipe Bracket

121933308
WG200325BR: RNCC: 3 | RNVC: 9
WG 200 325 BR: RNCC: 5 | RNVC: 2
WG200325BR: RNCC: 5 | RNVC: 2
WG 200 325 BR: RNCC: 5 | RNVC: 9

12 Jul 1982

5340-12-334-5079
Butt Hinge Leaf

123345079
078 12 0550 9050: RNCC: 2 | RNVC: 2
078 12 0550 9050: RNCC: 3 | RNVC: 2
5330331: RNCC: 5 | RNVC: 2

18 May 1994

5340-12-354-1796
Angle Bracket

123541796
03878800: RNCC: 3 | RNVC: 2

13 Jun 2001

5340-12-331-7610
Loop Clamp

123317610
4990 027: RNCC: 3 | RNVC: 2
4990027: RNCC: 5 | RNVC: 2

17 Jun 1993

5340-12-302-1420
Nonmetallic Bumper

123021420
1700015-200.05: RNCC: 2 | RNVC: 2
500275: RNCC: 3 | RNVC: 2
1700015-200.05: RNCC: 5 | RNVC: 9

6 Dec 1984

5340-12-010-9028

5340-12-389-7829
Shimmy Damper

123897829
3052777: RNCC: 3 | RNVC: 2

23 Aug 2012

5340-12-318-7224
Mounting Bracket

123187224
562A378: RNCC: 3 | RNVC: 2
562K0465: RNCC: 5 | RNVC: 2

9 Aug 1989

5340-12-368-8892
Access Cover

123688892
9BEU10279-ABM: RNCC: 3 | RNVC: 2

4 May 2006

5340-12-184-9477
Platte

121849477
CF447183AU: RNCC: 3 | RNVC: 2
CF 447 183 AU: RNCC: 5 | RNVC: 2
CF447183AU: RNCC: 5 | RNVC: 2
CF 447 183 AU: RNCC: 5 | RNVC: 2

28 Aug 1980

5340-12-326-5768
Dust And Moisture Seal Protective Plug

123265768
4025090707: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-12-392-5978
Retaining Strap

123925978
5809951968: RNCC: 3 | RNVC: 2

20 Jun 2013

5340-12-136-5335
Retaining Strap

121365335
111251269A: RNCC: 3 | RNVC: 2
0107 3591: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-315-3656
Nut And Bolt Locking Plate

123153656
0002521273: RNCC: 3 | RNVC: 2
1818123000: RNCC: 3 | RNVC: 2
000 252 12 73: RNCC: 5 | RNVC: 2

15 Oct 1988

5340-12-358-5381
Mounting Bracket

123585381
28109 00000: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-12-070-1913

5340-12-142-5824
Nut And Bolt Locking Plate

121425824
1201034012: RNCC: 3 | RNVC: 2
94703: RNCC: 5 | RNVC: 2
MZ14-3: RNCC: 5 | RNVC: 2
WPT40Z11X: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-173-8524
Section Block Clamp

121738524
PAN4274-5: RNCC: 3 | RNVC: 2

17 May 1978

5340-12-380-5850
Runner

123805850
500100-4: RNCC: 3 | RNVC: 2

11 Nov 2009

5340-12-317-2000
Mounting Bracket

123172000
3604302111: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-12-173-2307
Electrical-Mechanical Equipment Post

121732307
5800828-13611-001: RNCC: 3 | RNVC: 2
5800828-13611.001: RNCC: 5 | RNVC: 2

29 Mar 1978

5340-12-383-5571
Mechanic Equipment Hardware Kit

123835571
5371-140000D07K: RNCC: 3 | RNVC: 2

8 Nov 2010

5340-12-388-8875
Webbing Strap

123888875
PB301STRAP: RNCC: 3 | RNVC: 2
PB301STRAP: RNCC: 5 | RNVC: 2

3 May 2012

5340-12-327-4853
Access Cover

123274853
4606910708: RNCC: 3 | RNVC: 2

27 Jan 1992

5340-12-189-4061
Loop Clamp

121894061
LN9491BK38: RNCC: 2 | RNVC: 2

24 Sep 1981

5340-12-378-4285
Clamping Catch

123784285
5811: RNCC: 3 | RNVC: 2
006060: RNCC: 5 | RNVC: 2

3 Apr 2009

5340-12-373-8987
Manual Control Lever

123738987
2500278-320981.000.0: RNCC: 3 | RNVC: 2

17 Dec 2007

5340-12-193-0010
Shimmy Damper

121930010
4619875039: RNCC: 3 | RNVC: 2
726 1 75 169 1: RNCC: 5 | RNVC: 9

11 Jun 1982

5340-12-379-1354
Pipe Hanger

123791354
S882M6571210: RNCC: 3 | RNVC: 2

25 Jun 2009

5340-12-378-4768
Retaining Bail

123784768
3084 308 016: RNCC: 3 | RNVC: 2
3084 308 016: RNCC: 5 | RNVC: 2

8 Apr 2009

5340-12-315-3678
Mounting Bracket

123153678
02492930: RNCC: 3 | RNVC: 2
2492930EZ5012-58: RNCC: 5 | RNVC: 2

15 Oct 1988

5340-12-179-2998
Nonmetallic Bumper

121792998
3275045082: RNCC: 3 | RNVC: 2

20 Jun 1979

5340-12-193-0011
Door Holder

121930011
4617910914: RNCC: 3 | RNVC: 2
726 1 75 081 1: RNCC: 5 | RNVC: 9

11 Jun 1982

5340-12-317-3193
Angle Bracket

123173193
4900064-4121.008: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-198-7044
Strap Fastener Loop

121987044
2500138-170200.00: RNCC: 2 | RNVC: 2
2500138-170200.00: RNCC: 3 | RNVC: 2
2500138-170200.00: RNCC: 5 | RNVC: 9

20 Feb 1984

5340-12-361-3322
Access Cover

123613322
51014023016: RNCC: 3 | RNVC: 2
51.01402-3016: RNCC: 5 | RNVC: 2

18 Sep 2003

5340-12-307-1579
Mending Plate

123071579
4217230095: RNCC: 3 | RNVC: 2

15 May 1986

5340-12-022-7106

5340-12-319-2810
Rod End Connector

123192810
2654-332141.03: RNCC: 2 | RNVC: 2
2654-332141.03: RNCC: 3 | RNVC: 2
2654-332 141.03: RNCC: 5 | RNVC: 9
679-02010401.03: RNCC: 5 | RNVC: 9
679-02010401.03: RNCC: 5 | RNVC: 9

19 Sep 1989

5340-12-701-9973
Loop Clamp

127019973
VG95211-ML-127019973: RNCC: 2 | RNVC: 2
155N464-729: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-338-9447
Mounting Bracket

123389447
4900319-201200.00: RNCC: 2 | RNVC: 2
4900319-201200.00: RNCC: 3 | RNVC: 2

15 Sep 1995

5340-12-308-8336
Mending Plate

123088336
1281-64310.04: RNCC: 2 | RNVC: 2
159932: RNCC: 3 | RNVC: 2
1281-64310.04: RNCC: 5 | RNVC: 2

21 Nov 1986

5340-12-157-6951
Helical Compression Spring Seat

121576951
5148-276: RNCC: 3 | RNVC: 2
5148-276: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-349-3873
Access Cover

123493873
VG95211-ML-123493873: RNCC: 2 | RNVC: 2
590619-8100.000: RNCC: 3 | RNVC: 2
590619-8100.000: RNCC: 5 | RNVC: 2
590619-8100.000: RNCC: 5 | RNVC: 9

9 Nov 1999

5340-12-172-9479
Angle Bracket

121729479
02443216: RNCC: 3 | RNVC: 2
2443216EE5091-17: RNCC: 5 | RNVC: 2

6 Mar 1978

5340-12-132-7054
Expansion Plug

121327054
DIN443-52-ST-PHR: RNCC: 2 | RNVC: 2
0630 361 067: RNCC: 5 | RNVC: 2
52DIN443PHR: RNCC: 5 | RNVC: 2
52DIN443PHRE: RNCC: 5 | RNVC: 2
0630361067: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-177-9602
Retaining Strap

121779602
81974010150: RNCC: 3 | RNVC: 2
00.03360-2675: RNCC: 5 | RNVC: 9
00033602675: RNCC: 5 | RNVC: 9

9 Mar 1979

5340-12-315-3886
Access Cover

123153886
NO PRIMARY REF 12-315-3886: RNCC: 3 | RNVC: 2
5513 155133: RNCC: 5 | RNVC: 9

19 Oct 1988

5340-12-382-1961
Mounting Bracket

123821961
12.30: RNCC: 3 | RNVC: 2

20 May 2010

5340-12-366-4107
Webbing Strap

123664107
01-300 02506: RNCC: 3 | RNVC: 2

21 Apr 2005

5340-12-359-1522
Permanent Magnet

123591522
A43A-KSM4KAH: RNCC: 3 | RNVC: 2
A43A-KSM4KAH: RNCC: 3 | RNVC: 2
A43A-KSM4KAH: RNCC: 5 | RNVC: 9

20 Dec 2002

5340-12-300-8112
Nonmetallic Bumper

123008112
4615410118: RNCC: 3 | RNVC: 2

1 Sep 1984

5340-12-164-1036

5340-12-302-2970
Spring Tension Clip

123022970
2300164-291180.012: RNCC: 2 | RNVC: 2
9835300: RNCC: 3 | RNVC: 2
9835300: RNCC: 5 | RNVC: 9
2300164-291180-012: RNCC: 5 | RNVC: 9
2300164-291180.012: RNCC: 5 | RNVC: 9

14 Dec 1984

5340-12-307-8470
Quick Release Plunger

123078470
510252-8305.000: RNCC: 3 | RNVC: 2
51 02 52-8305: RNCC: 5 | RNVC: 2
510252-8305: RNCC: 5 | RNVC: 2

1 Aug 1986

5340-12-312-6169
Electrical-Mechanical Equipment Post

123126169
615.17-01-00-00-001: RNCC: 3 | RNVC: 2

22 Jan 1988

5340-12-199-7065
Loop Clamp

121997065
351271303111: RNCC: 3 | RNVC: 2
35127130311: RNCC: 5 | RNVC: 2

24 May 1984

5340-12-319-3375
Hand Crank

123193375
2044.0,5.10.00: RNCC: 3 | RNVC: 2

25 Sep 1989

5340-12-197-5020
Retaining Strap

121975020
1003070: RNCC: 3 | RNVC: 2
1003070: RNCC: 5 | RNVC: 2
604/7: RNCC: 5 | RNVC: 2

27 Oct 1983

5340-12-199-4223
Escutcheon Plate

121994223
588.51-000000-011: RNCC: 3 | RNVC: 2

20 Apr 1984

5340-12-149-3741
Resilient Mount

121493741
0718074/1MN70: RNCC: 3 | RNVC: 2
6160217: RNCC: 5 | RNVC: 2
0718074.70: RNCC: 5 | RNVC: 2
0718-074-17: RNCC: 5 | RNVC: 9
0718074-17: RNCC: 5 | RNVC: 9
071807417: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-091-3359

5340-12-125-2203

5340-12-157-6442
Resilient Mount

121576442
DIN95368-B1-1-NBR60-ST: RNCC: 2 | RNVC: 2
64105009.60SHORE OELBESTAENDIG: RNCC: 5 | RNVC: 2
786025MITTEL0ELBESTAENDIG: RNCC: 5 | RNVC: 2
K56MITTEL0ELBESTAENDIG: RNCC: 5 | RNVC: 2
786025MITTEL0ELBESTAENDIG: RNCC: 5 | RNVC: 2
408928925: RNCC: 5 | RNVC: 2
KONUS-LAGER-786025.NBR60.ST: RNCC: 5 | RNVC: 2
57860250022: RNCC: 5 | RNVC: 2
408928925: RNCC: 5 | RNVC: 9
VG95368-B1-1-NBR60ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-199-6974
Nonmetallic Bumper

121996974
5565128/4: RNCC: 3 | RNVC: 2

24 May 1984

5340-12-303-3440
Resilient Mount

123033440
21335-2: RNCC: 3 | RNVC: 2
21335-2: RNCC: 5 | RNVC: 9

15 Mar 1985

5340-12-135-6523

5340-12-701-8448
Loop Clamp

127018448
VG95211-ML-127018448: RNCC: 2 | RNVC: 2
5149A-45: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-393-8422
Mounting Bracket

123938422
33111-003-001: RNCC: 3 | RNVC: 2

15 Oct 2013

5340-12-353-9382
Mounting Plate

123539382
6600211-620901.00: RNCC: 2 | RNVC: 2
6600211-620901.00: RNCC: 3 | RNVC: 2

21 May 2001

5340-12-178-5797
Dust And Moisture Seal Protective Cap

121785797
908.792: RNCC: 3 | RNVC: 2
908-792: RNCC: 5 | RNVC: 2
908792: RNCC: 5 | RNVC: 2
585147: RNCC: 5 | RNVC: 2

3 May 1979

5340-12-393-3098
Angle Bracket

123933098
J92220356-005: RNCC: 3 | RNVC: 2

5 Sep 2013

5340-12-338-9277
Access Door

123389277
9903539: RNCC: 3 | RNVC: 9
463-151333.000: RNCC: 5 | RNVC: 9

11 Sep 1995

5340-12-374-8855
Angle Bracket

123748855
453 7699-001: RNCC: 3 | RNVC: 2
453 7699-001: RNCC: 5 | RNVC: 2

3 Apr 2008

5340-12-328-9655
Dust And Moisture Seal Protective Cap

123289655
AFG-07-214-06-00-01: RNCC: 3 | RNVC: 2

3 Jul 1992

5340-12-375-2089
Mounting Bracket

123752089
OA8: RNCC: 3 | RNVC: 2
ACE-OA8: RNCC: 5 | RNVC: 2

5 May 2008

5340-12-352-3882
Access Cover

123523882
VG95211-ML-123523882: RNCC: 2 | RNVC: 2
D11-0007: RNCC: 3 | RNVC: 2

14 Nov 2000

5340-12-351-7680
Helical Compression Spring Seat

123517680
07110-11012-NIROSTA: RNCC: 3 | RNVC: 2
NLM07110-11012-NIROSTA: RNCC: 5 | RNVC: 2

21 Aug 2000

5340-12-702-2448
Mounting Plate

127022448
VG95211-ML-127022448: RNCC: 2 | RNVC: 2
30.7723.31: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-365-9417
Mounting Bracket

123659417
9304299040: RNCC: 3 | RNVC: 2

21 Feb 2005

5340-12-387-6577
Manual Control Handle

123876577
7122341: RNCC: 3 | RNVC: 2

20 Jan 2012

5340-12-316-2184
Mounting Bracket

123162184
70 40 900 000: RNCC: 3 | RNVC: 2
0601292: RNCC: 5 | RNVC: 9

30 Dec 1988

5340-12-024-9624

5340-12-377-6065
Webbing Strap

123776065
351212201281: RNCC: 3 | RNVC: 2

28 Jan 2009

5340-12-350-0057
Dust And Moisture Seal Protective Plug

123500057
81960020438: RNCC: 3 | RNVC: 2

4 Feb 2000

5340-12-325-5135
Line Supporting Strap

123255135
N903550.01: RNCC: 3 | RNVC: 9
N90355001: RNCC: 3 | RNVC: 9

12 Jun 1991

5340-12-390-1850
Angle Bracket

123901850
066434: RNCC: 3 | RNVC: 2

12 Oct 2012

5340-12-385-2302
Helical Compression Spring Seat

123852302
F1.1189-40-40-10.00-07: RNCC: 3 | RNVC: 2

11 May 2011

5340-12-350-4182
Butt Hinge Leaf

123504182
J52424121-001: RNCC: 3 | RNVC: 2

29 Mar 2000

5340-12-332-7305
Mending Plate

123327305
C41107-A467-C339: RNCC: 3 | RNVC: 2
35626858: RNCC: 3 | RNVC: 2

13 Sep 1993

5340-12-365-7810
Expansion Plug

123657810
0118 1259: RNCC: 3 | RNVC: 2
H2860-A16-ST-FE/ZNPHR: RNCC: 5 | RNVC: 2

2 Feb 2005

5340-12-196-1306
Handle Grip

121961306
20-5140-324: RNCC: 3 | RNVC: 2

1 Jun 1983

5340-12-158-2736
Electrical-Mechanical Equipment Post

121582736
22.3129.0302: RNCC: 3 | RNVC: 9
22-3129-0302: RNCC: 5 | RNVC: 9
000-22-3129-0302: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-310-1757
Retaining Strap

123101757
44-25346: RNCC: 3 | RNVC: 2
142150: RNCC: 5 | RNVC: 2
549-01-142150: RNCC: 5 | RNVC: 2

14 Apr 1987

5340-12-164-4612
Retaining Strap

121644612
23290-204160.003: RNCC: 2 | RNVC: 2
23290-204160.003: RNCC: 3 | RNVC: 2
23290-204160-003: RNCC: 5 | RNVC: 9
23290-204160.003: RNCC: 5 | RNVC: 9
23290-204160.003: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-319-1117
Bridge Clamp

123191117
2654-332100.16: RNCC: 2 | RNVC: 2
2654-332100.16: RNCC: 3 | RNVC: 2
679-02010000.16: RNCC: 5 | RNVC: 9
2654-332 100.16: RNCC: 5 | RNVC: 9
679-02010000.16: RNCC: 5 | RNVC: 9

8 Sep 1989

5340-12-356-8455
Angle Bracket

123568455
ED88-0100-01001-137: RNCC: 3 | RNVC: 2

10 Apr 2002

5340-12-315-3152
Handle Grip

123153152
17 1017.00.01: RNCC: 3 | RNVC: 2
25335930: RNCC: 5 | RNVC: 2
704005477: RNCC: 5 | RNVC: 2
85-695-0662: RNCC: 6 | RNVC: 9

12 Oct 1988

5340-12-320-9795
Metallic Bumper

123209795
702-711000-921-0: RNCC: 3 | RNVC: 2

13 Mar 1990

5340-12-188-9857
Retaining Band

121889857
5801433-035000.00.0: RNCC: 3 | RNVC: 2
5801433-035000-00-0: RNCC: 5 | RNVC: 2
5801433-035000-00-0: RNCC: 5 | RNVC: 9
5801433-035000.00.0: RNCC: 5 | RNVC: 9

17 Aug 1981

5340-12-702-2304
Blank Panel

127022304
VG95211-ML-127022304: RNCC: 2 | RNVC: 2
30.7701.01: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-305-9813
Dust And Moisture Seal Protective Plug

123059813
1865-010360.00.0: RNCC: 3 | RNVC: 9

16 Jan 1986

5340-12-183-2851
Platte

121832851
5801441-32060.001: RNCC: 2 | RNVC: 2
5801441-32060.001: RNCC: 3 | RNVC: 2
5801441-32060-001: RNCC: 5 | RNVC: 2
5801441-32060.001: RNCC: 5 | RNVC: 9
5801441-32060-001: RNCC: 5 | RNVC: 9

3 Apr 1980

5340-12-315-3139
Rod End Connector

123153139
4900153-30620-00-15: RNCC: 3 | RNVC: 2
4900153-30620-15: RNCC: 5 | RNVC: 9

12 Oct 1988

5340-12-386-5663
Mounting Plate

123865663
2500262-190000.040.0: RNCC: 3 | RNVC: 2

12 Sep 2011

5340-12-376-7719
Mounting Bracket

123767719
8202002940: RNCC: 3 | RNVC: 2

5 Nov 2008

5340-12-362-3078
Loop Clamp

123623078
LN9490BM15: RNCC: 2 | RNVC: 2

5 Feb 2004

5340-12-359-0523
Angle Bracket

123590523
3855400473: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-380-9012
Access Cover

123809012
504204255: RNCC: 3 | RNVC: 2

10 Dec 2009

5340-12-180-4452
Nonmetallic Bumper

121804452
861201245A: RNCC: 3 | RNVC: 2

12 Sep 1979

5340-12-364-2052
Mounting Bracket

123642052
4374201586: RNCC: 3 | RNVC: 2

1 Sep 2004

5340-12-314-0636
Pipe Bracket

123140636
4232000195: RNCC: 3 | RNVC: 2
423 200 01 95: RNCC: 5 | RNVC: 2

2 Jun 1988

5340-12-196-2549
Angle Bracket

121962549
00923400: RNCC: 3 | RNVC: 2

20 Jun 1983

5340-12-177-1213
Dust And Moisture Seal Protective Cap

121771213
861941659: RNCC: 3 | RNVC: 2

17 Jan 1979

5340-12-317-2997
Nut And Bolt Locking Plate

123172997
3279940115: RNCC: 3 | RNVC: 2

28 Mar 1989

5340-12-139-2844
Padlock

121392844
TL5340-0020-070: RNCC: 2 | RNVC: 2
116-30MM: RNCC: 3 | RNVC: 2
85/30 MM: RNCC: 3 | RNVC: 2
009-110.008-004: RNCC: 5 | RNVC: 2
DIN7465-E1-30-BK: RNCC: 5 | RNVC: 2
TK-KG55-5340-482-070: RNCC: 5 | RNVC: 2
TK5340-482-070: RNCC: 5 | RNVC: 2
85-30MM: RNCC: 5 | RNVC: 9
85/30MM: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-333-8855
Mounting Plate

123338855
404-5-10: RNCC: 3 | RNVC: 2
404-5.10: RNCC: 5 | RNVC: 2

21 Feb 1994

5340-12-302-8386
Turnbuckle Body

123028386
1000131-3000.03: RNCC: 2 | RNVC: 2
1582836: RNCC: 3 | RNVC: 2
49.010.30000.03E: RNCC: 5 | RNVC: 9

4 Feb 1985

5340-12-394-6346
Manual Control Handle

123946346
GN302-63-M10-32-SW: RNCC: 3 | RNVC: 2

20 Dec 2013

5340-12-363-7048
Swivel Caster

123637048
31F/200/4N: RNCC: 3 | RNVC: 2

16 Jul 2004

5340-12-147-9065
Rod End Clevis

121479065
100109-1600.06: RNCC: 2 | RNVC: 2
100109-1600.06: RNCC: 5 | RNVC: 2
100109-1600-06: RNCC: 5 | RNVC: 2
100109-1600-06: RNCC: 5 | RNVC: 9
122505119: RNCC: 8 | RNVC: 2

30 May 1969

5340-12-324-4299
Spring Loaded Cylinder Fastener

123244299
NO PRIMARY REF 12-324-4299: RNCC: 3 | RNVC: 2
SG1214: RNCC: 5 | RNVC: 9

15 Feb 1991

5340-12-306-2429
Mending Plate

123062429
47047-001: RNCC: 3 | RNVC: 2
47 047-001: RNCC: 5 | RNVC: 9

11 Feb 1986

5340-12-351-9055
Access Cover

123519055
171-02-64295: RNCC: 2 | RNVC: 2
171-02-64295: RNCC: 3 | RNVC: 2

13 Sep 2000

5340-12-359-9509
Mounting Bracket

123599509
2500261-850450.000.0: RNCC: 2 | RNVC: 2
2500261-850450.000.0: RNCC: 3 | RNVC: 2

24 Mar 2003

5340-12-343-2926
Mounting Bracket

123432926
9997006-241010.000.0: RNCC: 3 | RNVC: 2

2 Jun 1997

5340-12-377-8006
Hand Crank

123778006
401-0112-21-22-000: RNCC: 3 | RNVC: 2

11 Feb 2009

5340-12-322-7737
Mounting Bracket

123227737
5200.230.071.000: RNCC: 3 | RNVC: 9
5200.230.071.000.1: RNCC: 5 | RNVC: 9
52002300710001: RNCC: 5 | RNVC: 9

21 Sep 1990

5340-12-185-4936
Loop Clamp

121854936
PAN4263-34: RNCC: 3 | RNVC: 2

11 Oct 1980

5340-12-314-2060
Handle Grip

123142060
272.1767.24031-09: RNCC: 2 | RNVC: 2
272.1767.24031-09: RNCC: 3 | RNVC: 2

16 Jun 1988

5340-12-353-9391
Angle Bracket

123539391
5802161-201310.00: RNCC: 2 | RNVC: 2
5802161-201310.00: RNCC: 3 | RNVC: 2

21 May 2001

5340-12-303-9321
Corner Brace

123039321
200447: RNCC: 3 | RNVC: 2
24K03-0084-00.019: RNCC: 5 | RNVC: 2
200447: RNCC: 5 | RNVC: 2

21 May 1985

5340-12-354-8216
Mounting Bracket

123548216
J28230072-404: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-300-4596
Sealing Plug Assembly

123004596
E4-2013491: RNCC: 3 | RNVC: 2
E4-2013491: RNCC: 5 | RNVC: 9
E4-2013491: RNCC: 5 | RNVC: 9

3 Aug 1984

5340-12-342-9924
Resilient Mount

123429924
5084-246: RNCC: 3 | RNVC: 2

21 Apr 1997

5340-12-344-1473
Angle Bracket

123441473
9162.041-00: RNCC: 3 | RNVC: 2

18 Sep 1997

5340-12-187-5233
Rod End Clevis

121875233
DIN71752-G8X32-A4P: RNCC: 2 | RNVC: 2
01101638: RNCC: 3 | RNVC: 2
1101638EY8836-09: RNCC: 5 | RNVC: 2
X8X32DIN71752A4C: RNCC: 5 | RNVC: 2

13 Apr 1981

5340-12-364-3341
Mounting Plate

123643341
5374-120000A04B: RNCC: 2 | RNVC: 2
5374-120000A04B: RNCC: 3 | RNVC: 2

11 Sep 2004

5340-12-350-8357
Clamping Catch

123508357
58R119-11363: RNCC: 3 | RNVC: 2

26 May 2000

5340-12-701-8434
Loop Clamp

127018434
VG95211-ML-127018434: RNCC: 2 | RNVC: 2
5149A-20: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-183-6417
Bow Handle

121836417
GN225-20: RNCC: 3 | RNVC: 2
20GN225: RNCC: 5 | RNVC: 2

6 May 1980

5340-12-349-3910
Blank Panel

123493910
325G-256-T4: RNCC: 3 | RNVC: 2

9 Nov 1999

5340-12-309-6727
Nut And Bolt Locking Plate

123096727
5119940030: RNCC: 3 | RNVC: 2

16 Feb 1987

5340-12-378-4057
Lever Bracket

123784057
1686-916900: RNCC: 3 | RNVC: 2

2 Apr 2009

5340-12-353-0309
Dust And Moisture Seal Protective Cover

123530309
1219 0308: RNCC: 3 | RNVC: 2

22 Jan 2001

5340-12-353-4837
Access Cover

123534837
5802017-715600.00: RNCC: 2 | RNVC: 2
5802017-715600.00: RNCC: 3 | RNVC: 2

29 Mar 2001

5340-12-392-2879
Cushioning Pad

123922879
7000135: RNCC: 3 | RNVC: 2

23 May 2013

5340-12-393-5980
Pipe Bracket

123935980
06.66010-2002: RNCC: 3 | RNVC: 2
06.66010-2002: RNCC: 5 | RNVC: 2
441.08.028: RNCC: 5 | RNVC: 2

26 Sep 2013

5340-12-346-7530
Runner

123467530
8514.1024: RNCC: 3 | RNVC: 2

7 Sep 1998

5340-12-179-5752
Spring Tension Clip

121795752
431819645: RNCC: 3 | RNVC: 2

9 Jul 1979

5340-12-198-5008
Metal Runner

121985008
5802017-603000.01: RNCC: 3 | RNVC: 2

2 Feb 1984

5340-12-364-2857
Retaining Bail

123642857
T661P1002229: RNCC: 3 | RNVC: 2

8 Sep 2004

5340-12-310-8915
Resilient Mount

123108915
RU51873: RNCC: 3 | RNVC: 2

7 Jul 1987

5340-12-175-3541
Loop Clamp

121753541
LN9490B12: RNCC: 2 | RNVC: 2

11 Sep 1978

5340-12-326-3996
Nonmetallic Bumper

123263996
714-001300-914-0: RNCC: 2 | RNVC: 2
PLATTE650X40X2-5.5701.3: RNCC: 3 | RNVC: 2
714-001300-914-0: RNCC: 3 | RNVC: 2

11 Sep 1991

5340-12-182-3032
Butt Hinge Leaf

121823032
B25X3X224HAN16515-3-3214-7: RNCC: 3 | RNVC: 2

25 Jan 1980

5340-12-304-7207
Double Angle Bracket

123047207
2300126-181000.006.0: RNCC: 2 | RNVC: 2
2300126-181000.006.0: RNCC: 3 | RNVC: 2
2300126-181000.006.0: RNCC: 5 | RNVC: 2
2300126-181000.006.0: RNCC: 5 | RNVC: 9

15 Aug 1985

5340-12-359-4365
Loop Clamp

123594365
DIN3016-1-E1-22X15-W1-2-NBR: RNCC: 2 | RNVC: 2

5 Feb 2003

5340-12-188-9447
Angle Bracket

121889447
5801433-020000.07.0: RNCC: 3 | RNVC: 2
5801433-020000-07-0: RNCC: 5 | RNVC: 2
5801433-020000-07-0: RNCC: 5 | RNVC: 9
5801433-020000.07.0: RNCC: 5 | RNVC: 9

11 Aug 1981

5340-12-318-8797
Electronic Equipment Hardware Kit

123188797
870/003-120: RNCC: 3 | RNVC: 2
870/003-120: RNCC: 5 | RNVC: 2

22 Aug 1989

5340-12-120-8167
Spring Tension Clip

121208167
50-266-227: RNCC: 3 | RNVC: 2
23193-7100-21: RNCC: 5 | RNVC: 2
18227: RNCC: 5 | RNVC: 2
2336-7-1-01-29: RNCC: 5 | RNVC: 9
TW931-2152-03: RNCC: 5 | RNVC: 9
76-86: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-326-9681
Access Cover

123269681
RP683032: RNCC: 3 | RNVC: 2

14 Nov 1991

5340-12-304-1726
Double Angle Bracket

123041726
4.021-2121-0002: RNCC: 3 | RNVC: 2

19 Jun 1985

5340-12-351-9126
Multiple Angle Bracket

123519126
111G08019: RNCC: 3 | RNVC: 2

14 Sep 2000

5340-12-701-2005
Mounting Bracket

127012005
VG95211-ML-127012005: RNCC: 2 | RNVC: 2
5.12.0603.0290.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-180-3584
Angle Bracket

121803584
90.402.06.122: RNCC: 3 | RNVC: 2
42482294: RNCC: 5 | RNVC: 2
42482294EY5511-31: RNCC: 5 | RNVC: 2
90-402-06-122: RNCC: 5 | RNVC: 2

7 Sep 1979

5340-12-362-8022
Mounting Plate

123628022
10020924: RNCC: 3 | RNVC: 2

2 Apr 2004

5340-12-181-4628
Dust And Moisture Seal Protective Cap

121814628
4H050-3605: RNCC: 3 | RNVC: 2

26 Nov 1979

5340-12-172-6538
Retaining Strap

121726538
805-10-00-23-01: RNCC: 3 | RNVC: 2

8 Feb 1978

5340-12-392-6709
Webbing Strap

123926709
UK025/L=500MM,SCHWARZ: RNCC: 3 | RNVC: 2

27 Jun 2013

5340-12-135-6512

5340-12-381-6187
Mechanic Equipment Hardware Kit

123816187
310320052H: RNCC: 3 | RNVC: 2

10 Mar 2010

5340-12-312-0577
Dust And Moisture Seal Protective Plug

123120577
KB132: RNCC: 3 | RNVC: 2

13 Nov 1987

5340-12-386-3231
Mounting Plate

123863231
2481-391862.002.0: RNCC: 2 | RNVC: 2
2481-391862.002.0: RNCC: 3 | RNVC: 2

24 Aug 2011

5340-12-185-0329
Angle Bracket

121850329
F01-211130-03-0: RNCC: 3 | RNVC: 2

4 Sep 1980

5340-12-306-3556
Mending Plate

123063556
P-230330-047: RNCC: 3 | RNVC: 2
P230330-047: RNCC: 5 | RNVC: 2

24 Feb 1986

5340-12-190-7220
Loop Clamp

121907220
B44030J0035: RNCC: 3 | RNVC: 2
C44030-J35: RNCC: 5 | RNVC: 2
0116074529001: RNCC: 5 | RNVC: 9
22-29001-00: RNCC: 5 | RNVC: 9
22/29001.00: RNCC: 5 | RNVC: 9
011 6074 529001: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-143-5769
Loop Clamp

121435769
3386454EF1053-44: RNCC: 3 | RNVC: 2
1053-44-01-07: RNCC: 5 | RNVC: 2
1053-44-01-07: RNCC: 5 | RNVC: 2
1053-44-01.07: RNCC: 5 | RNVC: 2
0338 6454: RNCC: 5 | RNVC: 2
3386454: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-5283
Mounting Bracket

127025283
VG95211-ML-127025283: RNCC: 2 | RNVC: 2
5.51.7020.0030.07: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-326-8156
Dust And Moisture Seal Protective Cap

123268156
4060-244: RNCC: 3 | RNVC: 2
R 22180: RNCC: 5 | RNVC: 2
4060E-244: RNCC: 5 | RNVC: 2
R 22180: RNCC: 5 | RNVC: 9
42094-090.05: RNCC: 5 | RNVC: 9
42094-100: RNCC: 5 | RNVC: 9
4060960: RNCC: 5 | RNVC: 9
42094-090.04: RNCC: 5 | RNVC: 9
4060-960: RNCC: 5 | RNVC: 9

29 Oct 1991

5340-12-319-9978
Dust And Moisture Seal Protective Cap

123199978
HP006-5-00000-74-0-90-Z16: RNCC: 3 | RNVC: 2

27 Nov 1989

5340-12-312-7737
Webbing Strap

123127737
301131-023031.000.0: RNCC: 2 | RNVC: 2
301131-023031.000.0: RNCC: 3 | RNVC: 9
301131-023031.000.0: RNCC: 5 | RNVC: 2

4 Feb 1988

5340-12-198-6633
Angle Bracket

121986633
23114-4321.17: RNCC: 2 | RNVC: 2
23114-4321.17: RNCC: 3 | RNVC: 2
23114-4321-17: RNCC: 5 | RNVC: 9
23114-4321.17: RNCC: 5 | RNVC: 9
23114-4321-17: RNCC: 5 | RNVC: 9
23114-4321.17: RNCC: 5 | RNVC: 9

17 Feb 1984

5340-12-326-4986
Multiple Angle Bracket

123264986
2300232-185100.003.0: RNCC: 2 | RNVC: 2
2300232-185100.003.0: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-12-340-5052
Friction Catch Stud

123405052
5L.3741.008.30: RNCC: 3 | RNVC: 2

24 Apr 1996

5340-12-010-4314

5340-12-193-3119
Nonmetallic Bumper

121933119
1164660882: RNCC: 3 | RNVC: 2

12 Jul 1982

5340-12-179-5284
Plain Solid Disk

121795284
1003679: RNCC: 3 | RNVC: 2
891-02-032-01-4: RNCC: 5 | RNVC: 2

4 Jul 1979

5340-12-358-3296
Mounting Plate

123583296
2500262-190000.032.0: RNCC: 2 | RNVC: 2
2500262-190000.032.0: RNCC: 3 | RNVC: 2

14 Oct 2002

5340-12-354-7522
Mounting Plate

123547522
5.045-190.0: RNCC: 3 | RNVC: 2

22 Aug 2001

5340-12-197-7121
Lock-Release Lever

121977121
2088-315: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-12-305-1131
Webbing Strap

123051131
01151-2-SCHLAUFE-FE115-LE780MM: RNCC: 3 | RNVC: 2
4900059-211322.000.0: RNCC: 3 | RNVC: 2
79057/SCHLAUFE-895-115: RNCC: 5 | RNVC: 2
1286128: RNCC: 5 | RNVC: 2
DIN60060-2-25X115X780-C3/SCHLAUF: RNCC: 5 | RNVC: 9

27 Sep 1985

5340-12-314-3203
Resilient Mount

123143203
DIN95369-A1-1-M10-CR-ST: RNCC: 2 | RNVC: 2
151001-M10-CR.ST-40: RNCC: 5 | RNVC: 2
60-100-040 M10: RNCC: 5 | RNVC: 2
VG95369-A1-1-M10-CR-ST: RNCC: 5 | RNVC: 9
C1010 M10: RNCC: 5 | RNVC: 9

25 Jun 1988

5340-12-701-3957
Loop Clamp

127013957
VG95211-ML-127013957: RNCC: 2 | RNVC: 2
5.12.5311.2600.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-143-0697
Retaining Clip

121430697
2360-220000.01.0: RNCC: 2 | RNVC: 2
2360-220000-01-0: RNCC: 5 | RNVC: 2
2360-220000.01.0: RNCC: 5 | RNVC: 2
2360-220000.01.0: RNCC: 5 | RNVC: 2
2360-220000-01-0: RNCC: 5 | RNVC: 9
2360-220000.01.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-703-2113
Antipilferage Seal Locking Wire

127032113
VG95211-ML-127032113: RNCC: 2 | RNVC: 2
51CHFA-G-P-CHW-1,6 GOST 14963-78: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-12-309-6222
Plug Button

123096222
KMS010-830100.002.0: RNCC: 3 | RNVC: 2

10 Feb 1987

5340-12-321-9579
Mending Plate

123219579
3513024706: RNCC: 3 | RNVC: 2
5800600-0190.004: RNCC: 5 | RNVC: 2
35130 24706: RNCC: 5 | RNVC: 9

12 Jul 1990

5340-12-322-8572
Angle Bracket

123228572
1206 7980: RNCC: 3 | RNVC: 2
1206 7980: RNCC: 5 | RNVC: 9
3.602.0.680.002.4: RNCC: 5 | RNVC: 9

28 Sep 1990

5340-12-304-5506
Handwheel

123045506
NO PRIMARY REF 12-304-5506: RNCC: 3 | RNVC: 2
6022 139403: RNCC: 5 | RNVC: 9

30 Jul 1985

5340-12-321-4028
Angle Bracket

123214028
2782-363100.000.0: RNCC: 2 | RNVC: 2
2782-363100.000.0: RNCC: 3 | RNVC: 2

16 May 1990

5340-12-313-0495
Mounting Bracket

123130495
5801984-980600.000.0: RNCC: 2 | RNVC: 2
5801984-980600.000.0: RNCC: 3 | RNVC: 2

1 Mar 1988

5340-12-368-8184
Butt Hinge

123688184
1030010-162100.001.0: RNCC: 3 | RNVC: 2

25 Apr 2006

5340-12-312-7857
Support Hook

123127857
4618950079: RNCC: 3 | RNVC: 2
721 1 85 137 1: RNCC: 5 | RNVC: 9

4 Feb 1988

5340-12-369-0641
Dust And Moisture Seal Protective Plug

123690641
350 I 17: RNCC: 3 | RNVC: 2

17 May 2006

5340-12-368-8899
Mounting Plate

123688899
2300306-993002.000.0: RNCC: 3 | RNVC: 2

4 May 2006

5340-12-702-8595
Mechanical Stop

127028595
53-04045004534: RNCC: 2 | RNVC: 2

5 Jan 1996

5340-12-165-9028
Bow Handle

121659028
23111-4193.00: RNCC: 2 | RNVC: 2
23111-4193.00: RNCC: 3 | RNVC: 2
23111-4193-00: RNCC: 5 | RNVC: 9
23111-4193-00: RNCC: 5 | RNVC: 9
23111-4193.00: RNCC: 5 | RNVC: 9

15 Jul 1976

5340-12-383-4738
Retaining Strap

123834738
SMJ 234-001-124-300: RNCC: 3 | RNVC: 2
SMJ234-001-124-300: RNCC: 5 | RNVC: 2

26 Oct 2010

5340-12-145-7875
Loop Clamp

121457875
1201 9327: RNCC: 3 | RNVC: 2
12019327: RNCC: 5 | RNVC: 2
A26.18-509/01: RNCC: 5 | RNVC: 2
A26-18-509-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-346-5815
Hand Crank

123465815
5052-180435: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-12-388-7527
Locking Shackle

123887527
101.102630: RNCC: 3 | RNVC: 2

19 Apr 2012

5340-12-338-7879
Angle Bracket

123387879
4110611664: RNCC: 3 | RNVC: 2
4110011664: RNCC: 5 | RNVC: 2

24 Aug 1995

5340-12-385-6567
Mounting Bracket

123856567
X00038760: RNCC: 3 | RNVC: 2

28 Jun 2011

5340-12-306-6290
Strap Fastener Loop

123066290
6030037: RNCC: 3 | RNVC: 2

17 Mar 1986

5340-12-310-2139
Mending Plate

123102139
6182386: RNCC: 3 | RNVC: 2

22 Apr 1987

5340-12-010-8565

5340-12-320-9949
Retaining Strap

123209949
0223 4889: RNCC: 3 | RNVC: 2
02234889EE0150-33: RNCC: 5 | RNVC: 2

14 Mar 1990

5340-12-319-6577
Mounting Bracket

123196577
5451001: RNCC: 3 | RNVC: 2

23 Oct 1989

5340-12-147-1020
Utility Resilient Mount

121471020
524K08701: RNCC: 3 | RNVC: 2
8392850082: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-308-5963
Extension Drawer Slide

123085963
GC301-1422B: RNCC: 3 | RNVC: 2
GC301-1422A: RNCC: 5 | RNVC: 2
TYPS GC 301 1422: RNCC: 5 | RNVC: 2

28 Oct 1986

5340-12-182-3239
Retaining Strap

121823239
2300033-450000.22: RNCC: 2 | RNVC: 2
2300033-450000-22: RNCC: 5 | RNVC: 9
2300033-450000-22: RNCC: 5 | RNVC: 9
FTW302-04-09-24B: RNCC: 5 | RNVC: 9

25 Jan 1980

5340-12-199-5457
Nonmetallic Bumper

121995457
2500057-500000.08: RNCC: 2 | RNVC: 2
2500057-500000.08: RNCC: 3 | RNVC: 2
2500057-500000.08: RNCC: 3 | RNVC: 2
2500057-500000.08: RNCC: 3 | RNVC: 2
PLATTE 1025X75X3MIT LOCH-CR75: RNCC: 5 | RNVC: 2
2500057-500000-08: RNCC: 5 | RNVC: 9

10 May 1984

5340-12-341-0480
Retaining Strap

123410480
2653-013650.00: RNCC: 2 | RNVC: 2
2653-013650.00: RNCC: 3 | RNVC: 2
2653-013650.00: RNCC: 5 | RNVC: 2

23 Jul 1996

5340-12-145-5265
Loop Clamp

121455265
900729-11: RNCC: 3 | RNVC: 2
70000000914105: RNCC: 5 | RNVC: 2
0914105: RNCC: 5 | RNVC: 9
900729-11: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-360-7664
Clamping Catch

123607664
D0066001-001: RNCC: 3 | RNVC: 2

8 Jul 2003

5340-12-194-9943
Mending Plate

121949943
1200074-150000.006: RNCC: 2 | RNVC: 2
009-083.150-006: RNCC: 3 | RNVC: 2
1200074-150000.006: RNCC: 5 | RNVC: 9

28 Dec 1982

5340-12-326-6029
Runner

123266029
4900346-200000.09: RNCC: 2 | RNVC: 2
4900346-200000.09: RNCC: 3 | RNVC: 2

11 Oct 1991

5340-12-389-4840
Mounting Bracket

123894840
242-4935-42-11-08: RNCC: 3 | RNVC: 2

12 Jul 2012

5340-12-308-3908
Quick Release Plunger

123083908
SP 18530-540: RNCC: 3 | RNVC: 2

6 Oct 1986

5340-12-329-0338
Nonmetallic Bumper

123290338
2300232-974040.002.0: RNCC: 2 | RNVC: 2
2300232-974040.002.0: RNCC: 3 | RNVC: 2
2300232-974040.002.0: RNCC: 3 | RNVC: 2

11 Jul 1992

5340-12-324-0616
Dust And Moisture Seal Protective Plug

123240616
VSP 207: RNCC: 3 | RNVC: 2
3029710228: RNCC: 5 | RNVC: 2

18 Jan 1991

5340-12-322-5221
Manual Control Handle

123225221
1509132: RNCC: 3 | RNVC: 2
1509132: RNCC: 5 | RNVC: 2

29 Aug 1990

5340-12-351-4996
Loop Clamp

123514996
0009956065: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-172-4759
Dust And Moisture Seal Protective Cap

121724759
30-79501-0003: RNCC: 3 | RNVC: 2

23 Jan 1978

5340-12-341-5876
Plain Solid Disk

123415876
0046900000: RNCC: 3 | RNVC: 2
TYPE 5/1-27-SIKA B 150: RNCC: 5 | RNVC: 2

26 Sep 1996

5340-12-316-8101
Access Cover

123168101
S22251-L13: RNCC: 3 | RNVC: 2

15 Feb 1989

5340-12-317-1689
Mending Plate

123171689
272.1616.1-16: RNCC: 3 | RNVC: 2

15 Mar 1989

5340-12-348-2101
Helical Compression Spring Seat

123482101
074383-425.19.04.00: RNCC: 3 | RNVC: 2
1211-119: RNCC: 5 | RNVC: 2
1211-119: RNCC: 5 | RNVC: 2

6 May 1999

5340-12-393-5177
Angle Bracket

123935177
11.29225-0041: RNCC: 3 | RNVC: 2
11.29225-0041: RNCC: 5 | RNVC: 2

20 Sep 2013

5340-12-354-3633
Access Cover

123543633
0008360158: RNCC: 3 | RNVC: 2
A0008360158: RNCC: 5 | RNVC: 2
A 000 836 01 58: RNCC: 5 | RNVC: 9

4 Jul 2001

5340-12-386-2597
Manual Control Lever

123862597
2481-393135.001.0: RNCC: 2 | RNVC: 2
2481-393135.001.0: RNCC: 3 | RNVC: 2

19 Aug 2011

5340-12-186-6164
Rod End Clevis

121866164
4-84975: RNCC: 3 | RNVC: 2

21 Jan 1981

5340-12-330-1928
Nonmetallic Bumper

123301928
K34 884: RNCC: 3 | RNVC: 2
5.4751.0840: RNCC: 5 | RNVC: 2
5 4751 0840: RNCC: 5 | RNVC: 2

12 Nov 1992

5340-12-334-5602
Nonmetallic Bumper

123345602
4900348-201700.00: RNCC: 2 | RNVC: 2
4900348-201700.00: RNCC: 3 | RNVC: 2

25 May 1994

5340-12-157-4522
Loop Clamp

121574522
5LV3829.340-26: RNCC: 3 | RNVC: 2
5LV3829-340-26: RNCC: 5 | RNVC: 2
1671310004: RNCC: 5 | RNVC: 2
K0BE6Z5Z: RNCC: 5 | RNVC: 2
5L3829-340-26: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-123-3145
Retaining Strap

121233145
03430785: RNCC: 3 | RNVC: 2
3430785EF5093-29: RNCC: 5 | RNVC: 2
5166-29-20-12: RNCC: 5 | RNVC: 2
5166-29-20.12: RNCC: 5 | RNVC: 2
F5166-29-20-12: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-145-9192
Retaining Strap

121459192
DIN72573-4X10-ST-VERZINKT: RNCC: 2 | RNVC: 2
DIN72573-4X10-ST-VERZINKT: RNCC: 3 | RNVC: 2
BSL4X10/72573VPE: RNCC: 3 | RNVC: 2
DIN72573-4X10-ST-VERZINKT: RNCC: 3 | RNVC: 2
DIN72573-4X10-ST-GALZN8: RNCC: 5 | RNVC: 2
4X10DIN72573STVERZINKT: RNCC: 5 | RNVC: 2
4X10DIN72573STVZK: RNCC: 5 | RNVC: 2
DIN72573-4X10-ST-GALZN8: RNCC: 5 | RNVC: 2
5128980410: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-317-5497
Rim Lock

123175497
7020000: RNCC: 3 | RNVC: 2
2602-157: RNCC: 5 | RNVC: 2
2602157: RNCC: 5 | RNVC: 2
2602157: RNCC: 5 | RNVC: 2

18 Apr 1989

5340-12-370-3641
Loop Clamp

123703641
AL/023: RNCC: 3 | RNVC: 2

30 Oct 2006

5340-12-174-3333
Retaining Strap

121743333
5801212-165: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-12-333-3246
Handle Grip

123333246
00098388450: RNCC: 3 | RNVC: 9
328-182308.002: RNCC: 5 | RNVC: 9
9838845: RNCC: 5 | RNVC: 9

24 Nov 1993

5340-12-042-6431

5340-12-122-2382

5340-12-180-4438
Dust And Moisture Seal Protective Cap

121804438
200Z10X10RAL1016: RNCC: 3 | RNVC: 2
GPN200Z10X10RAL1016: RNCC: 5 | RNVC: 2
200101010: RNCC: 5 | RNVC: 9
200Z10X10 GELB: RNCC: 5 | RNVC: 9
GPN200,Z10X10,GELB: RNCC: 5 | RNVC: 9

12 Sep 1979

5340-12-308-6533
Expansion Plug

123086533
5500310333: RNCC: 3 | RNVC: 2
5500310333: RNCC: 5 | RNVC: 2
5500310333: RNCC: 5 | RNVC: 2

3 Nov 1986

5340-12-304-1248
Angle Bracket

123041248
5802161-642100.08: RNCC: 2 | RNVC: 2
5802161-642100.08: RNCC: 3 | RNVC: 2

13 Jun 1985

5340-12-345-9922
Spacing Threaded Standoff

123459922
18H2034: RNCC: 3 | RNVC: 2

27 May 1998

5340-12-701-4785
Angle Bracket

127014785
VG95211-ML-127014785: RNCC: 2 | RNVC: 2
5.12.5811.1380.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-166-9567
Electrical-Mechanical Equipment Post

121669567
VG95148B8XM3X24,5-ST: RNCC: 2 | RNVC: 2
VG95148B8XM3X24,5-ST: RNCC: 3 | RNVC: 2
66-3524-051-01A001: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-12-312-9979
Dust And Moisture Seal Protective Plug

123129979
1900508215: RNCC: 3 | RNVC: 2
1 900 508 215: RNCC: 5 | RNVC: 2

24 Feb 1988

5340-12-358-7928
Buckle

123587928
2500283-40000.22: RNCC: 3 | RNVC: 2

14 Nov 2002

5340-12-011-5817

5340-12-026-1680

5340-12-306-4016
Mending Plate

123064016
V22.917.31-7: RNCC: 3 | RNVC: 2

26 Feb 1986

5340-12-390-8434
Dust And Moisture Seal Protective Cover

123908434
93-91-06933: RNCC: 3 | RNVC: 2
80088617: RNCC: 5 | RNVC: 2

19 Dec 2012

5340-12-300-7967
Mending Plate

123007967
23114-3516.01: RNCC: 2 | RNVC: 2
23114-3516.01: RNCC: 3 | RNVC: 2
23114-3516-01: RNCC: 5 | RNVC: 9
23114-3516-01: RNCC: 5 | RNVC: 9
23114-3516.01: RNCC: 5 | RNVC: 9
23114-3516.01: RNCC: 5 | RNVC: 9

31 Aug 1984

5340-12-319-1674
Electrical-Mechanical Equipment Post

123191674
54.0023.300.56: RNCC: 2 | RNVC: 2
54.0023.300.56: RNCC: 3 | RNVC: 2
VG95148B5XM2,5X42-NRST: RNCC: 5 | RNVC: 2

12 Sep 1989

5340-12-320-1774
Webbing Strap

123201774
7300037-60: RNCC: 2 | RNVC: 2
7300037-60: RNCC: 3 | RNVC: 2
TL 7320-0064 LFD. NR. 11: RNCC: 5 | RNVC: 2

14 Dec 1989

5340-12-188-7321
Access Cover

121887321
5801479-3350.01: RNCC: 2 | RNVC: 2
5801479-3350.01: RNCC: 3 | RNVC: 2
5801479-3350-01: RNCC: 5 | RNVC: 2
5801479-3350-01: RNCC: 5 | RNVC: 9
5801479-3350.01: RNCC: 5 | RNVC: 9

28 Jul 1981

5340-12-353-0969
Mending Plate

123530969
5800044-9490.05: RNCC: 2 | RNVC: 2
5800044-9490.05: RNCC: 3 | RNVC: 2

26 Jan 2001

5340-12-199-4149
Double Angle Bracket

121994149
3094300110: RNCC: 3 | RNVC: 2

19 Apr 1984

5340-12-329-0467
Handle Grip

123290467
23333-261780.07.0: RNCC: 3 | RNVC: 2

14 Jul 1992

5340-12-194-0020
Plain Solid Disk

121940020
2420000000: RNCC: 3 | RNVC: 2
2 420 000 000: RNCC: 5 | RNVC: 2

22 Sep 1982

5340-12-386-1036
Access Cover

123861036
2500262-736110.000.0: RNCC: 3 | RNVC: 2

9 Aug 2011

5340-12-701-6094
Retaining Band

127016094
5.12.7003.1350.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-334-5015
Verriegelun Buegel

123345015
8 691 324 665: RNCC: 3 | RNVC: 2
22728 26004: RNCC: 5 | RNVC: 9

18 May 1994

5340-12-318-1272
Door Holder

123181272
1000173-190330.000.0: RNCC: 2 | RNVC: 2
1000173-190330.000.0: RNCC: 3 | RNVC: 2

14 Jun 1989

5340-12-336-6317
Helical Compression Spring Seat

123366317
D13868: RNCC: 3 | RNVC: 2
D 13 868: RNCC: 5 | RNVC: 2
D13868: RNCC: 5 | RNVC: 9

2 Dec 1994

5340-12-197-9115
Angle Bracket

121979115
CF 325 699 A: RNCC: 3 | RNVC: 2
CF 325 699: RNCC: 5 | RNVC: 2
CF 325 699: RNCC: 5 | RNVC: 2
CF 325 699 A: RNCC: 5 | RNVC: 2

1 Dec 1983

5340-12-023-2482

5340-12-358-9698
Snap Hook

123589698
572669: RNCC: 3 | RNVC: 2
0009881096: RNCC: 5 | RNVC: 2

4 Dec 2002

5340-12-360-1754
Latch Bar

123601754
9417230169: RNCC: 3 | RNVC: 2

14 Apr 2003

5340-12-385-8421
Handwheel

123858421
24580.0016: RNCC: 3 | RNVC: 2
2458.016: RNCC: 5 | RNVC: 9

13 Jul 2011

5340-12-351-3736
Spring Tension Clip

123513736
105-727357.01: RNCC: 3 | RNVC: 2

19 Jul 2000

5340-12-358-9756
Butt Hinge Leaf

123589756
423295: RNCC: 3 | RNVC: 2
0006470255: RNCC: 5 | RNVC: 2

4 Dec 2002

5340-12-364-2858
Retaining Bail

123642858
T661P1002230: RNCC: 3 | RNVC: 2

8 Sep 2004

5340-12-042-5513

5340-12-198-1920
Mending Plate

121981920
1421300003: RNCC: 3 | RNVC: 2
01288651EY0147-17: RNCC: 5 | RNVC: 2
1421300003: RNCC: 5 | RNVC: 2
VDPM00722: RNCC: 5 | RNVC: 2
5100112627: RNCC: 5 | RNVC: 2
1288651: RNCC: 5 | RNVC: 2
0128 8651: RNCC: 5 | RNVC: 2

28 Dec 1983

5340-12-191-8066
Pad Eye

121918066
54.2638.518-02: RNCC: 3 | RNVC: 2
54-2638-518-02: RNCC: 5 | RNVC: 9

8 Mar 1982

5340-12-360-0349
Rod End Connector

123600349
201595209: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-322-9995
Access Cover

123229995
6735575: RNCC: 3 | RNVC: 2
6735575: RNCC: 5 | RNVC: 9

16 Oct 1990

5340-12-322-3484
Bridge Clamp

123223484
4618602614: RNCC: 3 | RNVC: 2

14 Aug 1990

5340-12-319-6909
Friction Catch Stud Receptacle

123196909
631867: RNCC: 3 | RNVC: 2
V731.36.016: RNCC: 5 | RNVC: 2
731.36.016: RNCC: 5 | RNVC: 2

26 Oct 1989

5340-12-162-0246
Nut And Bolt Locking Plate

121620246
4072 304 024: RNCC: 3 | RNVC: 2
4072304024: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-387-8659
Loop Clamp

123878659
7092252: RNCC: 3 | RNVC: 2

3 Feb 2012

5340-12-318-5831
Dust And Moisture Seal Protective Plug

123185831
9127.004.4: RNCC: 3 | RNVC: 2

31 Jul 1989

5340-12-701-6127
Mounting Plate

127016127
5.12.7010.1470.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-366-7315
Dust And Moisture Seal Protective Cover

123667315
2 0081-829: RNCC: 3 | RNVC: 2
2 0081-829: RNCC: 5 | RNVC: 2

1 Jun 2005

5340-12-326-4365
Helical Compression Spring Seat

123264365
4411562: RNCC: 3 | RNVC: 2
2.425363: RNCC: 5 | RNVC: 2

16 Sep 1991

5340-12-353-5524
Spacing Threaded Standoff

123535524
5.30.212: RNCC: 3 | RNVC: 2

6 Apr 2001

5340-12-178-6124
Door Button

121786124
CF316047AU: RNCC: 3 | RNVC: 2
CF 316 047 -U: RNCC: 5 | RNVC: 2
CF 316 047 AU: RNCC: 5 | RNVC: 2
CF3160470U: RNCC: 5 | RNVC: 2
CF316047AU: RNCC: 5 | RNVC: 2
CF 316 047 -U: RNCC: 5 | RNVC: 2
CF 316 047 AU: RNCC: 5 | RNVC: 2
CF3160470U: RNCC: 5 | RNVC: 2

3 May 1979

5340-12-158-9438
Resilient Mount

121589438
DIN95363-F30X40-M8-NR55ST: RNCC: 2 | RNVC: 2
81180-30X40-M8.NR55.ST: RNCC: 5 | RNVC: 2
BI8-00-25N: RNCC: 5 | RNVC: 9
VG95363-F30X40-M8-NR55ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-333-5707
Mending Plate

123335707
G32960-W0183-C264: RNCC: 3 | RNVC: 2

6 Jan 1994

5340-12-349-0960
Butt Hinge

123490960
J52822832-001: RNCC: 3 | RNVC: 2

23 Sep 1999

5340-12-381-0382
Casement Fastener

123810382
4.043-469.0: RNCC: 3 | RNVC: 2

4 Jan 2010

5340-12-387-6897
Elastic Strap

123876897
1030148-970000.001.0: RNCC: 3 | RNVC: 2

25 Jan 2012

5340-12-333-4083
Roller Holder

123334083
050045: RNCC: 3 | RNVC: 2

15 Dec 1993

5340-12-345-7542
Lock-Release Lever

123457542
TA3008P016: RNCC: 3 | RNVC: 2

22 Apr 1998

5340-12-351-8960
Access Cover

123518960
5L.6097.013.38: RNCC: 3 | RNVC: 2

12 Sep 2000

5340-12-091-7024

5340-12-188-6477
Ball Socket Seat

121886477
581694: RNCC: 3 | RNVC: 2
3023-0005-581694: RNCC: 5 | RNVC: 2
3023-0005-581694: RNCC: 5 | RNVC: 2

22 Jul 1981

5340-12-198-7862
Mending Plate

121987862
100227-12100.10: RNCC: 2 | RNVC: 2
100227-12100.10: RNCC: 5 | RNVC: 2
100227-12100.10: RNCC: 5 | RNVC: 9

27 Feb 1984

5340-12-185-6659
Friction Catch Stud

121856659
84183/0209: RNCC: 3 | RNVC: 2
84183-0209: RNCC: 5 | RNVC: 9

23 Oct 1980

5340-12-360-4155
Mounting Bracket

123604155
LAB-AGE-300000: RNCC: 3 | RNVC: 2

20 May 2003

5340-12-303-8855
Bow Handle

123038855
277.5: RNCC: 3 | RNVC: 2
277-5: RNCC: 5 | RNVC: 2
91692008: RNCC: 5 | RNVC: 2

13 May 1985

5340-12-363-1689
Swivel Caster

123631689
180958-1: RNCC: 3 | RNVC: 2

7 May 2004

5340-12-350-5192
Metallic Solid Wheel

123505192
WG 424 130 A: RNCC: 2 | RNVC: 2
WG 424 130 A: RNCC: 3 | RNVC: 2
WG 424 130 A: RNCC: 3 | RNVC: 2
WG424130A: RNCC: 5 | RNVC: 2

7 Apr 2000

5340-12-300-7982
Double Angle Bracket

123007982
23114-4190.09: RNCC: 2 | RNVC: 2
23114-4190.09: RNCC: 3 | RNVC: 2
23114-4190-09: RNCC: 5 | RNVC: 9
23114-4190.09: RNCC: 5 | RNVC: 9
23114-4190-09: RNCC: 5 | RNVC: 9
23114-4190.09: RNCC: 5 | RNVC: 9

31 Aug 1984

5340-12-166-0515
Spring Tension Clip

121660515
103-210-033: RNCC: 3 | RNVC: 2
F103STGALN15-BMT: RNCC: 3 | RNVC: 2
F103STGALN15-BMT: RNCC: 3 | RNVC: 2
F103STGALNI5-8MT: RNCC: 5 | RNVC: 2
F103STGALNI5-8MT: RNCC: 5 | RNVC: 2

29 Jul 1976

5340-12-343-6726
Spring Tension Clip

123436726
10587: RNCC: 3 | RNVC: 2
B401-02-03: RNCC: 5 | RNVC: 2

14 Jul 1997

5340-12-198-4117
Retaining Strap

121984117
29783-001: RNCC: 3 | RNVC: 2
29 783-001: RNCC: 5 | RNVC: 9

26 Jan 1984

5340-12-122-6239
Retaining Strap

121226239
4045010046: RNCC: 3 | RNVC: 2
404041101900: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-199-5209
Double Angle Bracket

121995209
3094280443: RNCC: 3 | RNVC: 2

8 May 1984

5340-12-358-9228
Angle Bracket

123589228
3804310340: RNCC: 3 | RNVC: 2

28 Nov 2002

5340-12-359-2915
Dust And Moisture Seal Protective Plug

123592915
60018: RNCC: 3 | RNVC: 2
160018: RNCC: 5 | RNVC: 9

20 Jan 2003

5340-12-345-0616
Metallic Solid Wheel

123450616
3032010072: RNCC: 3 | RNVC: 2

27 Jan 1998

5340-12-190-3266
Angle Bracket

121903266
100372-2113.01: RNCC: 3 | RNVC: 2
100372-2113-01: RNCC: 5 | RNVC: 2

23 Nov 1981

5340-12-388-7440
Strap Fastener Loop

123887440
DIN5293-34-LA: RNCC: 2 | RNVC: 2
34DIN5293-LA: RNCC: 5 | RNVC: 2

18 Apr 2012

5340-12-311-8108
Catch Strike

123118108
1540/41-01: RNCC: 3 | RNVC: 2
4607230203: RNCC: 5 | RNVC: 2

19 Oct 1987

5340-12-701-3594
Mounting Plate

127013594
5.12.5111.5730.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-345-2374
Pad Eye

123452374
U100-3771-005: RNCC: 3 | RNVC: 2

16 Feb 1998

5340-12-185-0332
Butt Hinge Leaf

121850332
F01-240140-17-0: RNCC: 3 | RNVC: 2

4 Sep 1980

5340-12-182-7374
Mounting Bracket

121827374
2394101: RNCC: 3 | RNVC: 2

22 Feb 1980

5340-12-363-0509
Angle Bracket

123630509
82657400014: RNCC: 3 | RNVC: 2
82.65740.0014: RNCC: 5 | RNVC: 2

29 Apr 2004

5340-12-188-1420
Resilient Mount

121881420
43419.1: RNCC: 3 | RNVC: 2
01279061: RNCC: 5 | RNVC: 2
43419-1: RNCC: 5 | RNVC: 2
1279061EY8755-29: RNCC: 5 | RNVC: 2

9 Jun 1981

5340-12-366-3329
Mounting Plate

123663329
P-085065-757: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-12-327-6781
Runner

123276781
CF 324 005 B: RNCC: 2 | RNVC: 2
CF 324 005 B: RNCC: 3 | RNVC: 2

18 Feb 1992

5340-12-353-7564
Spacing Threaded Standoff

123537564
5.02.203: RNCC: 3 | RNVC: 2

3 May 2001

5340-12-358-6814
Access Cover

123586814
2481-393200.002.0: RNCC: 2 | RNVC: 2
2481-393200.002.0: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-12-340-1629
Angle Bracket

123401629
6700017-202300.06: RNCC: 2 | RNVC: 2
6700017-202300.06: RNCC: 3 | RNVC: 2

8 Mar 1996

5340-12-197-8065
Dust And Moisture Seal Protective Cap

121978065
250/159: RNCC: 3 | RNVC: 2
SP03479: RNCC: 5 | RNVC: 2
GPN250/159: RNCC: 5 | RNVC: 2
250159000: RNCC: 5 | RNVC: 9
GPN250-159: RNCC: 5 | RNVC: 9
00.4.623.0721: RNCC: 5 | RNVC: 9

23 Nov 1983

5340-12-149-9104
Nonmetallic Bumper

121499104
120-703-B-00.22: RNCC: 3 | RNVC: 2
120-703-B-00.22: RNCC: 3 | RNVC: 2
800.120-703B00-22: RNCC: 5 | RNVC: 2
120-703B00-22: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-327-6306
Electrical-Mechanical Equipment Post

123276306
622-325M2: RNCC: 3 | RNVC: 2
D-2083-2590: RNCC: 5 | RNVC: 9

11 Feb 1992

5340-12-377-0650
Retaining Strap

123770650
2300399-060000.018.0: RNCC: 3 | RNVC: 2

10 Dec 2008

5340-12-302-1303
Flare Lock Fastener

123021303
21100-464: RNCC: 3 | RNVC: 2
35905-045: RNCC: 3 | RNVC: 2
602042114: RNCC: 5 | RNVC: 2
352250042319: RNCC: 5 | RNVC: 2
1109-2-4/ITEM 16: RNCC: 5 | RNVC: 2
915/4/07679: RNCC: 5 | RNVC: 2
35 905-045: RNCC: 5 | RNVC: 9

4 Dec 1984

5340-12-701-3942
Retaining Band

127013942
VG95211-ML-127013942: RNCC: 2 | RNVC: 2
5.12.5311.1980.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-315-5983
Retaining Strap

123155983
DIN3016-1-F1-16X15-W5-CR: RNCC: 2 | RNVC: 2
DIN3016-F1-16X15-W5: RNCC: 3 | RNVC: 2
RSGU2.16/15-W5: RNCC: 3 | RNVC: 2
DIN3016-F1-16X15-W5: RNCC: 5 | RNVC: 9
VG95931F16X15W5: RNCC: 5 | RNVC: 9

11 Nov 1988

5340-12-315-2304
Dust And Moisture Seal Protective Cap

123152304
R19504: RNCC: 3 | RNVC: 2
0004216787: RNCC: 5 | RNVC: 2

5 Oct 1988

5340-12-382-2006
Hand Crank

123822006
12.11: RNCC: 3 | RNVC: 2

20 May 2010

5340-12-350-3760
Clamping Catch

123503760
500.118B: RNCC: 3 | RNVC: 2

22 Mar 2000

5340-12-196-2027
Nonmetallic Bumper

121962027
408-00.08.321-20: RNCC: 3 | RNVC: 2
408-00-08-321-20: RNCC: 5 | RNVC: 2
408-00.08.321-20: RNCC: 5 | RNVC: 9

13 Jun 1983

5340-12-304-9607
Electrical-Mechanical Equipment Post

123049607
009-039.421-009: RNCC: 3 | RNVC: 2
12791-421000.008: RNCC: 5 | RNVC: 9

11 Sep 1985

5340-12-195-8765
Electrical-Mechanical Equipment Post

121958765
5801515-0526.002: RNCC: 3 | RNVC: 2
5801515-0526-002: RNCC: 5 | RNVC: 2
3412028804: RNCC: 5 | RNVC: 2
5801515-0526.002: RNCC: 5 | RNVC: 9
34120 28804: RNCC: 5 | RNVC: 9

26 Apr 1983

Load More Results