What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 116 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 116 of 178

5340-12-700-6657
Tubular Fairlead

127006657
VG95211-ML-127006657: RNCC: 2 | RNVC: 2
5.12.7805.0080.00: RNCC: 3 | RNVC: 2
0501401665459: RNCC: 5 | RNVC: 2

6 Oct 1992

5340-12-701-7174
Angle Bracket

127017174
VG95211-ML-127017174: RNCC: 2 | RNVC: 2
5.12.7601.8171.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-145-6204
Door Button

121456204
23176-189429.00.0: RNCC: 2 | RNVC: 2
23176-189429-00-0: RNCC: 5 | RNVC: 2
23176-189429-00-0: RNCC: 5 | RNVC: 9
23176-189429.00.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-337-4213
Sealing Plug Assembly

123374213
3.3304-1401.1: RNCC: 3 | RNVC: 2
0004311150: RNCC: 5 | RNVC: 2

2 Mar 1995

5340-12-168-2801
Loop Clamp

121682801
LN9491BM17: RNCC: 2 | RNVC: 2

4 Mar 1977

5340-12-374-9125
Dust And Moisture Seal Protective Plug

123749125
600B865: RNCC: 3 | RNVC: 2
GPN600B865: RNCC: 5 | RNVC: 2

7 Apr 2008

5340-12-321-1004
Access Cover

123211004
03752601: RNCC: 3 | RNVC: 2

27 Mar 1990

5340-12-042-5556

5340-12-315-0208
Mounting Bracket

123150208
66.3514.005.00-A001: RNCC: 3 | RNVC: 2
304986: RNCC: 5 | RNVC: 2

8 Sep 1988

5340-12-373-0835
Mounting Plate

123730835
DPAI 385: RNCC: 3 | RNVC: 2

25 Sep 2007

5340-12-351-6127
Retaining Strap

123516127
JN0242F50: RNCC: 3 | RNVC: 2

8 Aug 2000

5340-12-360-4935
Manual Control Lever

123604935
2300387-140000.000: RNCC: 2 | RNVC: 2
2300387-140000.000: RNCC: 3 | RNVC: 2
9915335: RNCC: 5 | RNVC: 9

26 May 2003

5340-12-159-0480
Angle Bracket

121590480
5AM518012-0080: RNCC: 3 | RNVC: 2
518012.0080.00: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-359-0312
Access Cover

123590312
537161-2286.000: RNCC: 3 | RNVC: 2
10006204: RNCC: 5 | RNVC: 2

11 Dec 2002

5340-12-308-4653
Nonmetallic Bumper

123084653
070-010000-010: RNCC: 3 | RNVC: 2

14 Oct 1986

5340-12-702-6339
Angle Bracket

127026339
VG95211-ML-127026339: RNCC: 2 | RNVC: 2
84-6110.230: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-322-5562
Extension Drawer Slide

123225562
MEM16-5029G2: RNCC: 3 | RNVC: 2

31 Aug 1990

5340-12-330-9465
Angle Bracket

123309465
2718-000020.000.0: RNCC: 2 | RNVC: 2
2718-000020.000.0: RNCC: 3 | RNVC: 2

2 Mar 1993

5340-12-324-8133
Mounting Plate

123248133
702-444500-951-0: RNCC: 3 | RNVC: 2

26 Mar 1991

5340-12-386-2293
Mounting Bracket

123862293
2500262-190000.001.0: RNCC: 2 | RNVC: 2
2500262-190000.001.0: RNCC: 3 | RNVC: 2

17 Aug 2011

5340-12-360-8344
Dust And Moisture Seal Protective Plug

123608344
78350 11135: RNCC: 3 | RNVC: 2

15 Jul 2003

5340-12-300-6661
Angle Bracket

123006661
4064261140: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-377-4076
Mounting Bracket

123774076
8605001.3.597.00: RNCC: 3 | RNVC: 2
8605001359700: RNCC: 5 | RNVC: 2

14 Jan 2009

5340-12-336-4856
Mounting Bracket

123364856
0049-801000A28C: RNCC: 3 | RNVC: 2
0049-801000A28C: RNCC: 5 | RNVC: 2

17 Nov 1994

5340-12-339-8532
Mounting Bracket

123398532
5.042-406.0: RNCC: 3 | RNVC: 2
5.042-406: RNCC: 5 | RNVC: 9

24 Jan 1996

5340-12-185-1401
Retaining Band

121851401
NO PRIMARY REF 12-185-1401: RNCC: 3 | RNVC: 2
1-6899-10-2-7300: RNCC: 5 | RNVC: 9
10-2-7300-2-3: RNCC: 5 | RNVC: 9

13 Sep 1980

5340-12-142-8543
Loop Clamp

121428543
0009953701: RNCC: 2 | RNVC: 2
RSGU 1. 8042.022/25: RNCC: 3 | RNVC: 2
4799-097: RNCC: 5 | RNVC: 2
4799097: RNCC: 5 | RNVC: 2
0009953701: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-371-5755
Butt Hinge Leaf

123715755
SK861-182052.000.0: RNCC: 3 | RNVC: 2
1589335: RNCC: 5 | RNVC: 9

19 Apr 2007

5340-12-308-2918
Pad Eye

123082918
P-875193-005: RNCC: 3 | RNVC: 2
P875193-005: RNCC: 5 | RNVC: 2

24 Sep 1986

5340-12-318-1817
Cremone Bolt

123181817
6100126-3520.03: RNCC: 2 | RNVC: 2
1049-U1/-U18/1001-U11/-S128/-31: RNCC: 3 | RNVC: 2
235-9001-201-0801 L=-200-3601-: RNCC: 3 | RNVC: 2
6100126-3520.03: RNCC: 5 | RNVC: 2
6100126-3520.03: RNCC: 5 | RNVC: 2

19 Jun 1989

5340-12-305-1947
Angle Bracket

123051947
5801763-120000.002: RNCC: 2 | RNVC: 2
5801763-120000.002: RNCC: 3 | RNVC: 2
5801763-120000.002: RNCC: 5 | RNVC: 9

4 Oct 1985

5340-12-354-4145
Double Angle Bracket

123544145
E31470 -02: RNCC: 3 | RNVC: 2

10 Jul 2001

5340-12-319-3822
Nonmetallic Bumper

123193822
C326-A25-C9: RNCC: 3 | RNVC: 2

27 Sep 1989

5340-12-179-1355
Helical Compression Spring Retainer

121791355
105-22701.23: RNCC: 3 | RNVC: 2
105-22701-23: RNCC: 5 | RNVC: 2

8 Jun 1979

5340-12-183-2321
Loop Clamp

121832321
844-25-000000008: RNCC: 3 | RNVC: 2

28 Mar 1980

5340-12-700-8671
Loop Clamp

127008671
VG95211-ML-127008671: RNCC: 2 | RNVC: 2
155N464-114: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-340-0888
Loop Clamp

123400888
V6530-00003-051: RNCC: 3 | RNVC: 2

26 Feb 1996

5340-12-311-2574
Access Cover

123112574
48152-001: RNCC: 3 | RNVC: 2
48 152-001: RNCC: 5 | RNVC: 9

11 Aug 1987

5340-12-195-1863
Angle Bracket

121951863
1000126-000000.04: RNCC: 2 | RNVC: 2
1000126-000000.04: RNCC: 5 | RNVC: 2
1000126-000000.04: RNCC: 5 | RNVC: 9
1000126-000000.04: RNCC: 5 | RNVC: 9

24 Jan 1983

5340-12-190-2208
Antipilferage Seal

121902208
E4-2011360: RNCC: 3 | RNVC: 2
E4-2011360: RNCC: 5 | RNVC: 9

12 Nov 1981

5340-12-171-9990
Door Button

121719990
14021-13016-01: RNCC: 3 | RNVC: 2
893735: RNCC: 5 | RNVC: 2

8 Dec 1977

5340-12-352-6890
Shimmy Damper

123526890
81417226046: RNCC: 3 | RNVC: 2
81.41722-6046: RNCC: 5 | RNVC: 2

6 Dec 2000

5340-12-185-1706
Retaining Strap

121851706
105-45021.66: RNCC: 3 | RNVC: 2
105-45021-66: RNCC: 5 | RNVC: 2

18 Sep 1980

5340-12-339-8599
Angle Bracket

123398599
5800748-11.004: RNCC: 3 | RNVC: 2

25 Jan 1996

5340-12-326-3359
Lock-Release Lever

123263359
2702064700: RNCC: 3 | RNVC: 2
27020-64700: RNCC: 5 | RNVC: 9

2 Sep 1991

5340-12-361-7868
Angle Bracket

123617868
J92228654-003: RNCC: 3 | RNVC: 2

18 Nov 2003

5340-12-125-7822
Rod End Clevis

121257822
DIN71752-G12X24-35S20K-A3P: RNCC: 2 | RNVC: 2
DIN71752-G12X24-35S20K-A3P: RNCC: 3 | RNVC: 2
DIN71752-G12X24-35S20K-A3P: RNCC: 3 | RNVC: 2
DIN71752-G12X24-35S20K-A3P: RNCC: 3 | RNVC: 2
100200120024/024-35S20K: RNCC: 5 | RNVC: 2
G12X24DIN71752-35S20KVERZINKT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-355-4352
Mechanical Stop

123554352
3330.123.4: RNCC: 3 | RNVC: 2

15 Nov 2001

5340-12-339-7848
Rod End Clevis

123397848
2300232-992051.001.0: RNCC: 2 | RNVC: 2
2300232-992051.001.0: RNCC: 3 | RNVC: 2

17 Jan 1996

5340-12-302-8384
Rod End Clevis

123028384
1300392-134000: RNCC: 2 | RNVC: 2
1592319: RNCC: 3 | RNVC: 2
49.013.40000.00E: RNCC: 5 | RNVC: 9

4 Feb 1985

5340-12-362-4759
Mounting Plate

123624759
201594226: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-12-361-4169
Clamping Catch

123614169
1508296: RNCC: 3 | RNVC: 2

25 Sep 2003

5340-12-348-4509
Metallic Bumper

123484509
00051290: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-12-354-4059
Mounting Bracket

123544059
F04711: RNCC: 3 | RNVC: 2

9 Jul 2001

5340-12-327-2931
Angle Bracket

123272931
4618800237: RNCC: 3 | RNVC: 2

7 Jan 1992

5340-12-331-8976
Lock-Release Lever

123318976
10832301: RNCC: 3 | RNVC: 2
EZ108323: RNCC: 5 | RNVC: 2

2 Jul 1993

5340-12-195-3949
Dust And Moisture Seal Protective Cap

121953949
3771 004: RNCC: 3 | RNVC: 2
3771004: RNCC: 5 | RNVC: 2

21 Feb 1983

5340-12-011-6380

5340-12-339-0213
Handle Grip

123390213
304031001: RNCC: 3 | RNVC: 2
30.40.310.01: RNCC: 5 | RNVC: 2
327: RNCC: 5 | RNVC: 2
0008610075: RNCC: 5 | RNVC: 2
327: RNCC: 5 | RNVC: 2

27 Sep 1995

5340-12-350-4352
Section Block Clamp

123504352
JN0413FG44: RNCC: 3 | RNVC: 2

30 Mar 2000

5340-12-314-6929
Clamping Catch

123146929
V951L04-1X1AJ: RNCC: 3 | RNVC: 2
080E81100: RNCC: 5 | RNVC: 2

29 Jul 1988

5340-12-181-0292
Angle Bracket

121810292
2500035-121000.00: RNCC: 2 | RNVC: 2
2500035-121000-00: RNCC: 5 | RNVC: 9

17 Oct 1979

5340-12-373-8478
Nonmetallic Bumper

123738478
106/5183-01-13-00: RNCC: 3 | RNVC: 2
106-5183-01-13-00: RNCC: 5 | RNVC: 2

12 Dec 2007

5340-12-305-1405
Butt Hinge

123051405
DIN7956-32X1,25-NRST-BK-U: RNCC: 2 | RNVC: 2
C32X1,25DIN7956-NRST: RNCC: 5 | RNVC: 2

1 Oct 1985

5340-12-180-6669
Plain Solid Disk

121806669
0287 5075: RNCC: 3 | RNVC: 2
2875075: RNCC: 5 | RNVC: 2
2875075EE0740-01: RNCC: 5 | RNVC: 2

26 Sep 1979

5340-12-361-3359
Mounting Bracket

123613359
51974850101: RNCC: 3 | RNVC: 2
51.97485-0101: RNCC: 5 | RNVC: 2

18 Sep 2003

5340-12-156-0391
Dust And Moisture Seal Protective Plug

121560391
169734501: RNCC: 3 | RNVC: 2
7101-72-80.08: RNCC: 5 | RNVC: 2
7101-72-80-08: RNCC: 5 | RNVC: 2
7101-72-80-08: RNCC: 5 | RNVC: 9
7101-72-80.08: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-700-8537
Loop Clamp

127008537
VG95211-ML-127008537: RNCC: 2 | RNVC: 2
155N1119-595: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-369-4287
Luggage Handle

123694287
NYX-DW-0179-10: RNCC: 3 | RNVC: 2

3 Jul 2006

5340-12-393-0184
Mounting Bracket

123930184
1030124-259000.002.0: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-12-339-2874
Mending Plate

123392874
ZG8229G041: RNCC: 3 | RNVC: 2
ZG 8229 G 041: RNCC: 5 | RNVC: 9
ZG8229G041: RNCC: 5 | RNVC: 9

3 Nov 1995

5340-12-305-2576
Door Button

123052576
4900059-982114.006.0: RNCC: 3 | RNVC: 2

15 Oct 1985

5340-12-309-0167
Angle Bracket

123090167
160-416741-08: RNCC: 3 | RNVC: 2
160-416741-08: RNCC: 5 | RNVC: 9

8 Dec 1986

5340-12-350-8476
Dust And Moisture Seal Protective Plug

123508476
910/4395: RNCC: 3 | RNVC: 2
GPN910/4395: RNCC: 5 | RNVC: 2

29 May 2000

5340-12-348-9124
Mounting Bracket

123489124
680003/7327-29-00-05: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-12-394-0627
Section Block Clamp

123940627
11.28098-0034: RNCC: 3 | RNVC: 2
11.28098-0034: RNCC: 5 | RNVC: 2

4 Nov 2013

5340-12-192-3158
Nonmetallic Bumper

121923158
1470D-NR60-SCHWARZ: RNCC: 3 | RNVC: 2
41800536EE8929-28: RNCC: 5 | RNVC: 2
41800536: RNCC: 5 | RNVC: 2
N92012S: RNCC: 5 | RNVC: 2
1470D: RNCC: 5 | RNVC: 9

13 Apr 1982

5340-12-175-7046
Electrical-Mechanical Equipment Post

121757046
2300074-4725.00: RNCC: 2 | RNVC: 2
2300074-4725.00: RNCC: 3 | RNVC: 2
2300074-4725-00: RNCC: 5 | RNVC: 2
2300074-4725-00: RNCC: 5 | RNVC: 9
2300074-4725.00: RNCC: 5 | RNVC: 9
2300074-4725-00: RNCC: 5 | RNVC: 9

11 Oct 1978

5340-12-124-0235
Expansion Plug

121240235
DIN470-40-ST-PHR: RNCC: 2 | RNVC: 2
40DIN470PHR: RNCC: 5 | RNVC: 2
40DIN470PHRE: RNCC: 5 | RNVC: 2
40DIN470STPHR: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-333-7108
Lock-Release Lever

123337108
26-21C1008 G001-P6: RNCC: 3 | RNVC: 2
26-21C1008G001P6: RNCC: 5 | RNVC: 2

27 Jan 1994

5340-12-185-4621
Resilient Mount

121854621
DIN95369-A3-3-M-ST: RNCC: 2 | RNVC: 2
151005-M10-HD.ST-60: RNCC: 5 | RNVC: 2
60-200-060 HD: RNCC: 5 | RNVC: 2
C2060 HDS: RNCC: 5 | RNVC: 2
8798990114: RNCC: 5 | RNVC: 2
8798990114: RNCC: 5 | RNVC: 9
VG95369-A3-3-MVQ-H-ST: RNCC: 5 | RNVC: 9
C2060HDS: RNCC: 5 | RNVC: 9

7 Oct 1980

5340-12-198-5388
Angle Bracket

121985388
5801998-100000.07: RNCC: 2 | RNVC: 2
2-03.013: RNCC: 3 | RNVC: 2
5801998-100000.07: RNCC: 3 | RNVC: 2
5801998-100000.07: RNCC: 3 | RNVC: 2
5801998-100000.07: RNCC: 5 | RNVC: 2
5801998-100000.07: RNCC: 5 | RNVC: 9
5801998-100000.07: RNCC: 5 | RNVC: 9

7 Feb 1984

5340-12-390-2156
Loop Clamp

123902156
DIN3016-1-D1-68X25-W1-2-NBR: RNCC: 2 | RNVC: 2

17 Oct 2012

5340-12-364-4808
Lock-Release Lever

123644808
2500304-10100.00: RNCC: 2 | RNVC: 2
185083: RNCC: 3 | RNVC: 2

1 Oct 2004

5340-12-319-0406
Spring Tension Clip

123190406
273001-0006.000: RNCC: 3 | RNVC: 2
273001-0-006: RNCC: 5 | RNVC: 2
273001-0006.000: RNCC: 5 | RNVC: 9

31 Aug 1989

5340-12-359-7884
Access Cover

123597884
2500261-183762.000.0: RNCC: 2 | RNVC: 2
2500261-183762.000.0: RNCC: 3 | RNVC: 2

11 Mar 2003

5340-12-701-1368
Mounting Bracket

127011368
VG95211-ML-127011368: RNCC: 2 | RNVC: 2
5.12.0100.5501.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-199-2739
Coat And Hat Hook

121992739
YN171-178-3: RNCC: 2 | RNVC: 2
2494G: RNCC: 3 | RNVC: 2
YN171-178-3: RNCC: 3 | RNVC: 2

7 Apr 1984

5340-12-394-2263
Mechanical Stop

123942263
ZG8504G015: RNCC: 3 | RNVC: 2
14100088119: RNCC: 5 | RNVC: 2

12 Nov 2013

5340-12-393-7762
Block Clamp

123937762
ECS6088G1C22: RNCC: 3 | RNVC: 2

10 Oct 2013

5340-12-377-3531
Loop Clamp

123773531
14206.485: RNCC: 3 | RNVC: 2
0009950868: RNCC: 5 | RNVC: 2

12 Jan 2009

5340-12-372-1500
Mounting Bracket

123721500
S322I30A1211: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-12-010-4337

5340-12-316-7341
Mounting Plate

123167341
AZ5005G027: RNCC: 3 | RNVC: 2
AZ5005G027: RNCC: 5 | RNVC: 9

8 Feb 1989

5340-12-372-1407
Retaining Strap

123721407
S322I30A1218: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-12-191-0866
Access Cover

121910866
2028R-16000.01: RNCC: 3 | RNVC: 2
2028R16000-01: RNCC: 5 | RNVC: 9

11 Jan 1982

5340-12-388-2355
Bow Handle

123882355
GN528-PA-132-M8-SW: RNCC: 3 | RNVC: 2

5 Mar 2012

5340-12-316-8872
Mending Plate

123168872
01800-0000-01-06: RNCC: 3 | RNVC: 2

22 Feb 1989

5340-12-322-3206
Rim Lock

123223206
6000518: RNCC: 3 | RNVC: 2
600 0518: RNCC: 5 | RNVC: 2
09-00078-000: RNCC: 5 | RNVC: 2

10 Aug 1990

5340-12-337-3070
Angle Bracket

123373070
03989100: RNCC: 3 | RNVC: 2

14 Feb 1995

5340-12-371-5403
Dust And Moisture Seal Protective Plug

123715403
N 020 032 1: RNCC: 3 | RNVC: 2

17 Apr 2007

5340-12-358-6988
Dust And Moisture Seal Protective Cover

123586988
2481-390110.000.0: RNCC: 2 | RNVC: 2
2481-390110.000.0: RNCC: 3 | RNVC: 2

6 Nov 2002

5340-12-362-3137
Spacing Threaded Standoff

123623137
33.14530.015 010: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-12-320-4398
Dust And Moisture Seal Protective Plug

123204398
620U11B: RNCC: 3 | RNVC: 2
GPN620,U11B: RNCC: 5 | RNVC: 9

15 Jan 1990

5340-12-319-3578
Electrical-Mechanical Equipment Post

123193578
18H320: RNCC: 3 | RNVC: 2

26 Sep 1989

5340-12-317-8151
Mending Plate

123178151
2500051-5130.01: RNCC: 2 | RNVC: 2
2500051-5130.01: RNCC: 5 | RNVC: 2
2500051-5130.01: RNCC: 5 | RNVC: 9
9866436: RNCC: 5 | RNVC: 9

17 May 1989

5340-12-305-2822
Double Angle Bracket

123052822
5801758-8010.00: RNCC: 2 | RNVC: 2
5801758-8010.00: RNCC: 3 | RNVC: 2
5801758-8010.00: RNCC: 5 | RNVC: 9

16 Oct 1985

5340-12-043-9396

5340-12-177-1357
Angle Bracket

121771357
5800822-0744-017: RNCC: 3 | RNVC: 2
5800822-0744.017: RNCC: 5 | RNVC: 2

17 Jan 1979

5340-12-386-1499
Manual Control Handle

123861499
2500317-064000.000.0: RNCC: 3 | RNVC: 2

11 Aug 2011

5340-12-198-2787
Gummi- Riemen

121982787
27 0322 343: RNCC: 2 | RNVC: 2
82300-27 0322 343: RNCC: 3 | RNVC: 2
27 0322 343: RNCC: 5 | RNVC: 2
27 0322 343: RNCC: 5 | RNVC: 9
9837778: RNCC: 5 | RNVC: 9
270322343: RNCC: 5 | RNVC: 9
82300-M230X20-NR-STZN-OG: RNCC: 6 | RNVC: 9

10 Jan 1984

5340-12-366-5793
Pad Eye

123665793
2 0066-666: RNCC: 3 | RNVC: 2
2 0066-666: RNCC: 5 | RNVC: 2

11 May 2005

5340-12-349-8218
Dust And Moisture Seal Protective Plug

123498218
46 63 1 235 660: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-12-358-6453
Multiple Angle Bracket

123586453
2500262-394200.007.0: RNCC: 2 | RNVC: 2
2500262-394200.007.0: RNCC: 3 | RNVC: 2

31 Oct 2002

5340-12-327-5567
Casement Fastener

123275567
1350.6.5.10.07: RNCC: 3 | RNVC: 2

3 Feb 1992

5340-12-386-0595
Mounting Bracket

123860595
869108902: RNCC: 3 | RNVC: 2

4 Aug 2011

5340-12-338-8543
Mounting Bracket

123388543
463-611820.000: RNCC: 3 | RNVC: 9
9894290: RNCC: 5 | RNVC: 9

31 Aug 1995

5340-12-327-4530
Hand Crank

123274530
201948: RNCC: 3 | RNVC: 2
1350.6,5.95.00: RNCC: 5 | RNVC: 2
1350.6.5.95.00: RNCC: 5 | RNVC: 9

23 Jan 1992

5340-12-350-3321
Dust And Moisture Seal Protective Cap-Plug

123503321
463-630727.000: RNCC: 3 | RNVC: 9

16 Mar 2000

5340-12-356-7854
Manual Control Handle

123567854
0312687: RNCC: 3 | RNVC: 2
0871423: RNCC: 5 | RNVC: 2
16742: RNCC: 5 | RNVC: 2

5 Apr 2002

5340-12-395-2646

5340-12-320-1392
Loop Clamp

123201392
DIN3015-LA-K-6R-44,5-PP-W1: RNCC: 2 | RNVC: 2
RAPR3-644,5: RNCC: 3 | RNVC: 2
SP644,5PP-DP-AS: RNCC: 3 | RNVC: 2
HRL6A44,5PP STMBL: RNCC: 3 | RNVC: 2
DIN3015-LA6R-44,5PP-W1-K: RNCC: 5 | RNVC: 2
RAPR3-644,5: RNCC: 5 | RNVC: 2
514206-44-5: RNCC: 5 | RNVC: 9

11 Dec 1989

5340-12-195-3617
Luggage Handle

121953617
10504-002: RNCC: 3 | RNVC: 2

15 Feb 1983

5340-12-371-7954
Mounting Bracket

123717954
7003788: RNCC: 3 | RNVC: 2

16 May 2007

5340-12-127-8039

5340-12-301-1932
Nonmetallic Bumper

123011932
30XM8EINSEITIG-55PORM5GRAD-SHORE: RNCC: 3 | RNVC: 2

27 Sep 1984

5340-12-386-2644
Access Cover

123862644
2500262-731500.000.0: RNCC: 3 | RNVC: 2

19 Aug 2011

5340-12-371-4984
Mounting Bracket

123714984
1508158: RNCC: 3 | RNVC: 2
548-820300.20.0: RNCC: 5 | RNVC: 2
15004853: RNCC: 5 | RNVC: 2
15015960: RNCC: 5 | RNVC: 2

10 Apr 2007

5340-12-197-9379
Metal Runner

121979379
CF 325 724 C: RNCC: 2 | RNVC: 2
CF 325 724 C: RNCC: 3 | RNVC: 2
CF 325 724 A: RNCC: 5 | RNVC: 2
CF 325 724 A: RNCC: 5 | RNVC: 2
CF 325 724 B: RNCC: 5 | RNVC: 2
CF 325 724 C: RNCC: 5 | RNVC: 2
CF 325 724 B: RNCC: 5 | RNVC: 2

2 Dec 1983

5340-12-302-7871
Catch Strike

123027871
CF 482 327 B: RNCC: 3 | RNVC: 2
CF 482 327 B: RNCC: 5 | RNVC: 2
CF 482 327 C: RNCC: 5 | RNVC: 2

30 Jan 1985

5340-12-172-8491
Split Tubular Clip

121728491
2043870: RNCC: 3 | RNVC: 2
3-448306: RNCC: 5 | RNVC: 2
3-448306: RNCC: 5 | RNVC: 2
3-448306: RNCC: 5 | RNVC: 2

27 Feb 1978

5340-12-168-1604
Retaining Strap

121681604
WW410259A: RNCC: 3 | RNVC: 2
WW 410 259 A: RNCC: 5 | RNVC: 2
WW410259A: RNCC: 5 | RNVC: 2
WW410259A: RNCC: 5 | RNVC: 2

23 Feb 1977

5340-12-368-5096
Webbing Strap

123685096
1030099-971015.000.0: RNCC: 2 | RNVC: 2
1030099-971015.000.0: RNCC: 3 | RNVC: 2

20 Mar 2006

5340-12-363-1285
Exit Bolt

123631285
1030020-260640.000.0: RNCC: 2 | RNVC: 2
1030020-260640.000.0: RNCC: 3 | RNVC: 2

6 May 2004

5340-12-702-5412
Mounting Bracket

127025412
VG95211-ML-127025412: RNCC: 2 | RNVC: 2
5.51.7209.0050.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-188-8939
Butt Hinge Leaf

121888939
5801433-033000.04.0: RNCC: 3 | RNVC: 2
5801433-033000-04-0: RNCC: 5 | RNVC: 2
5801433-033000-04-0: RNCC: 5 | RNVC: 9
5801433-033000.04.0: RNCC: 5 | RNVC: 9

6 Aug 1981

5340-12-328-5158
Resilient Mount

123285158
H95-172-74-90-6-FF7,1/82 GRAD: RNCC: 3 | RNVC: 2
CM03756-2: RNCC: 5 | RNVC: 2
CM03756-2: RNCC: 5 | RNVC: 9

27 May 1992

5340-12-185-1084
Nonmetallic Bumper

121851084
181885597: RNCC: 3 | RNVC: 2

11 Sep 1980

5340-12-304-6736
Retaining Band

123046736
0241 9948: RNCC: 3 | RNVC: 2
02419948KZ0148-33: RNCC: 5 | RNVC: 2

12 Aug 1985

5340-12-380-1735
Mounting Bracket

123801735
S288M3013101: RNCC: 3 | RNVC: 2

2 Oct 2009

5340-12-326-8973
Headless Straight Rod

123268973
P231995-025-IA: RNCC: 3 | RNVC: 2

6 Nov 1991

5340-12-700-9225
Loop Clamp

127009225
VG95211-ML-127009225: RNCC: 2 | RNVC: 2
200N-180: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-390-4580
Spring Loaded Cylinder Fastener

123904580
2300559-184330.000.0: RNCC: 2 | RNVC: 2
2300559-184330.000.0: RNCC: 3 | RNVC: 2

14 Nov 2012

5340-12-701-2400
Mounting Plate

127012400
VG95211-ML-127012400: RNCC: 2 | RNVC: 2
5.12.2402.3001.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-187-4615
Retaining Strap

121874615
2300109-060000.015.0: RNCC: 2 | RNVC: 2
2300109-060000.015.0: RNCC: 3 | RNVC: 2
2300109-060000.015.0: RNCC: 3 | RNVC: 2
2300109-060000-015-0: RNCC: 5 | RNVC: 9
2300109-060000.015.0: RNCC: 5 | RNVC: 9
2300109-060000-015-0: RNCC: 5 | RNVC: 9
2300109-060000-015-0: RNCC: 5 | RNVC: 9

8 Apr 1981

5340-12-324-3902
Permanent Magnet

123243902
605.74-01-05-00-002: RNCC: 3 | RNVC: 2

12 Feb 1991

5340-12-352-2736
Retaining Bail

123522736
2500238-060100.006.0: RNCC: 2 | RNVC: 2
2500238-060100.006.0: RNCC: 3 | RNVC: 2

2 Nov 2000

5340-12-374-2558
Mounting Plate

123742558
L521M3041329: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-314-1618
Spring Tension Clip

123141618
EM5053: RNCC: 3 | RNVC: 2
0004290540: RNCC: 5 | RNVC: 2
000 429 05 40: RNCC: 5 | RNVC: 2

14 Jun 1988

5340-12-357-5287
Mounting Bracket

123575287
0008100525: RNCC: 3 | RNVC: 2

28 Jun 2002

5340-12-141-6422
Nonmetallic Bumper

121416422
4049870039: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-388-0191
Mounting Bracket

123880191
5530720338: RNCC: 3 | RNVC: 2

15 Feb 2012

5340-12-366-0887
Bow Handle

123660887
729841395: RNCC: 3 | RNVC: 2

7 Mar 2005

5340-12-337-2990
Access Cover

123372990
1948956: RNCC: 3 | RNVC: 2
1948956: RNCC: 5 | RNVC: 2

14 Feb 1995

5340-12-302-9500
Dust And Moisture Seal Protective Plug

123029500
056103117: RNCC: 3 | RNVC: 2

12 Feb 1985

5340-12-321-6243
Shimmy Damper

123216243
5590902925: RNCC: 3 | RNVC: 2
5590901525: RNCC: 5 | RNVC: 2

8 Jun 1990

5340-12-362-6738
Mounting Bracket

123626738
4375400173: RNCC: 3 | RNVC: 2

17 Mar 2004

5340-12-321-2659
Mending Plate

123212659
119324: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-12-384-9044
Mounting Bracket

123849044
F1.1787-30-10-00.70-00: RNCC: 3 | RNVC: 2

8 Apr 2011

5340-12-196-3371
Catch Strike

121963371
25.5012.022-00: RNCC: 3 | RNVC: 2

29 Jun 1983

5340-12-322-5558
Bow Handle

123225558
MEM16-1072P1: RNCC: 3 | RNVC: 2

31 Aug 1990

5340-12-302-8934
Electrical-Mechanical Equipment Post

123028934
VG95148A15XM5X106-AL: RNCC: 2 | RNVC: 2
VG95148A15XM5X106-AL: RNCC: 3 | RNVC: 2
2W111A008-1210.02: RNCC: 3 | RNVC: 2

6 Feb 1985

5340-12-163-6757
Expansion Plug

121636757
23290-041120-004: RNCC: 2 | RNVC: 2
23290-041120.004: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-323-5035
Dust And Moisture Seal Protective Cap

123235035
250/105: RNCC: 3 | RNVC: 2
GPN250-105: RNCC: 5 | RNVC: 2
GPN250/105: RNCC: 5 | RNVC: 2

3 Dec 1990

5340-12-390-5638
Spring Tension Clip

123905638
5804038-202100.06: RNCC: 2 | RNVC: 2
LS100/17: RNCC: 5 | RNVC: 2

23 Nov 2012

5340-12-184-2202
Angle Bracket

121842202
5801357-1100.01: RNCC: 2 | RNVC: 2
5801357-1100.01: RNCC: 3 | RNVC: 2
5801357-1100-01: RNCC: 5 | RNVC: 9
5801357-1100-01: RNCC: 5 | RNVC: 9
5801357-1100-01: RNCC: 5 | RNVC: 9

5 Jul 1980

5340-12-310-9075
Loop Clamp

123109075
RSGU0.3X14/15: RNCC: 3 | RNVC: 2
04209315014: RNCC: 5 | RNVC: 2
4209315014: RNCC: 5 | RNVC: 2

8 Jul 1987

5340-12-350-9473
Mending Plate

123509473
J52422167-001: RNCC: 3 | RNVC: 2

8 Jun 2000

5340-12-340-0052
Mounting Plate

123400052
5800748-1179: RNCC: 3 | RNVC: 2

13 Feb 1996

5340-12-340-0598
Pad Eye

123400598
ZN4260-704: RNCC: 3 | RNVC: 2
8499880004: RNCC: 5 | RNVC: 2

22 Feb 1996

5340-12-345-0185
Flush Lock

123450185
3810Z-RECHTS: RNCC: 3 | RNVC: 2
3810Z RH: RNCC: 5 | RNVC: 2

21 Jan 1998

5340-12-301-1163
Double Angle Bracket

123011163
556-834772.020: RNCC: 3 | RNVC: 2
556-834772-020: RNCC: 5 | RNVC: 2

22 Sep 1984

5340-12-340-2091
Mounting Bracket

123402091
HALTERUNG F.30M ANSATZMAGAZIN: RNCC: 3 | RNVC: 2

14 Mar 1996

5340-12-311-6863
Angle Bracket

123116863
2 805 101 988: RNCC: 3 | RNVC: 2

6 Oct 1987

5340-12-179-8089
Pad Eye

121798089
81429062004: RNCC: 3 | RNVC: 2

1 Aug 1979

5340-12-191-9642
Pad Eye

121919642
5020290: RNCC: 3 | RNVC: 2
502.0290: RNCC: 5 | RNVC: 2

17 Mar 1982

5340-12-309-7935
Access Cover

123097935
6126222: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-12-339-8402
Retaining Strap

123398402
1.8535-14: RNCC: 3 | RNVC: 2
213883667: RNCC: 5 | RNVC: 2

23 Jan 1996

5340-12-336-3264
Clamping Catch

123363264
80100098: RNCC: 3 | RNVC: 2

10 Nov 1994

5340-12-388-0275
Angle Bracket

123880275
6623171331: RNCC: 3 | RNVC: 2

16 Feb 2012

5340-12-090-7188

5340-12-309-0222
Case Corner

123090222
P-245565-751: RNCC: 3 | RNVC: 2
P245565-751: RNCC: 5 | RNVC: 2

8 Dec 1986

5340-12-309-5636
Mending Plate

123095636
A-230130-011: RNCC: 3 | RNVC: 2
A230130-011: RNCC: 5 | RNVC: 2

4 Feb 1987

5340-12-185-3969
Double Angle Bracket

121853969
02-0899-181520.01.0: RNCC: 3 | RNVC: 2
02-0899-181520-01-0: RNCC: 5 | RNVC: 2
02-0899-181520-01-0: RNCC: 5 | RNVC: 9

3 Oct 1980

5340-12-311-5964
Angle Bracket

123115964
P-245135-755: RNCC: 3 | RNVC: 2
P245135-755: RNCC: 5 | RNVC: 2

23 Sep 1987

5340-12-359-8474
Dust And Moisture Seal Protective Plug

123598474
300F5RAL3000: RNCC: 3 | RNVC: 2
300F5ROT: RNCC: 5 | RNVC: 2
GPN300-F5RAL3000: RNCC: 5 | RNVC: 2

13 Mar 2003

5340-12-198-0447
Angle Bracket

121980447
C42080-A6-C103: RNCC: 3 | RNVC: 2

14 Dec 1983

5340-12-319-3843
Access Cover

123193843
C249-A15-C171: RNCC: 3 | RNVC: 2

27 Sep 1989

5340-12-343-9631
Spacing Threaded Standoff

123439631
52.9352.103.40: RNCC: 3 | RNVC: 2
VG95148B5XM2,5X15-NRST: RNCC: 5 | RNVC: 2

20 Aug 1997

5340-12-701-7115
Retaining Band

127017115
VG95211-ML-127017115: RNCC: 2 | RNVC: 2
5.12.7601.3060.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-145-3132
Line Supporting Strap

121453132
N16-6-10FX300: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-321-7058
Angle Bracket

123217058
702-244100-903-0: RNCC: 3 | RNVC: 2

18 Jun 1990

5340-12-394-6431
Strap Hinge

123946431
5070000-185000.002.0: RNCC: 3 | RNVC: 2
10460005: RNCC: 5 | RNVC: 9

2 Jan 2014

5340-12-188-5293
Retaining Strap

121885293
DIN72571-1X8-AL: RNCC: 2 | RNVC: 2
DIN72571-1X8-AL: RNCC: 3 | RNVC: 2
1X8DIN72571AL: RNCC: 5 | RNVC: 2

15 Jul 1981

5340-12-384-2742
Loop Clamp

123842742
DIN3016-1-D2-7-9X15-W1-2-NBR: RNCC: 2 | RNVC: 2

9 Feb 2011

5340-12-702-4622
Lock-Release Lever

127024622
VG95211-ML-127024622: RNCC: 2 | RNVC: 2
5.51.0603.1130.04: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-321-1319
Friction Catch Stud

123211319
1486408000: RNCC: 3 | RNVC: 2
1 486 408 000: RNCC: 5 | RNVC: 2

30 Mar 1990

5340-12-366-4027
Metal Grille

123664027
2-9-12.2: RNCC: 3 | RNVC: 2

20 Apr 2005

5340-12-368-4187
Mounting Plate

123684187
881.902-2.2: RNCC: 2 | RNVC: 2
881.902-2.2: RNCC: 3 | RNVC: 2

8 Mar 2006

5340-12-337-7823
Dust And Moisture Seal Protective Plug

123377823
P-282: RNCC: 3 | RNVC: 2
0019976686: RNCC: 5 | RNVC: 2

11 Apr 1995

5340-12-369-1708
Loop Clamp

123691708
SP 430.0 PP DP AS V4A: RNCC: 3 | RNVC: 2

31 May 2006

5340-12-193-0008
Access Cover

121930008
4616710336: RNCC: 3 | RNVC: 2
4616710336: RNCC: 5 | RNVC: 2
721 1 72 204 1: RNCC: 5 | RNVC: 9

11 Jun 1982

5340-12-386-2583
Mounting Plate

123862583
2500262-394286.001.0: RNCC: 2 | RNVC: 2
2500262-394286.001.0: RNCC: 3 | RNVC: 2

19 Aug 2011

5340-12-342-5408
Dust And Moisture Seal Protective Cap

123425408
200Z12X10: RNCC: 3 | RNVC: 2
GPN200Z12X10: RNCC: 5 | RNVC: 2
GPN 200 Z 12X10: RNCC: 5 | RNVC: 9

25 Feb 1997

5340-12-191-2384
Spring Tension Clip

121912384
N014378.1: RNCC: 3 | RNVC: 9

19 Jan 1982

5340-12-367-3033
Manual Control Handle

123673033
5.321-580.0: RNCC: 3 | RNVC: 2

1 Aug 2005

5340-12-150-6862
S Sicherungsplatte

5340-12-312-7212
Headless Straight Rod

123127212
2300223-261000.01.0: RNCC: 2 | RNVC: 2
2300223-261000.01.0: RNCC: 3 | RNVC: 2

29 Jan 1988

5340-12-361-0785
Mounting Plate

123610785
2300246-261786.01.0: RNCC: 2 | RNVC: 2
2300246-261786.01.0: RNCC: 3 | RNVC: 2

19 Aug 2003

5340-12-390-6135
Spring Holder

123906135
10187-188320.020.0: RNCC: 3 | RNVC: 2

28 Nov 2012

5340-12-302-7979
Turnbuckle

123027979
YK03300506: RNCC: 3 | RNVC: 2
H.B 913SV 1056 1975 03 30 0506: RNCC: 5 | RNVC: 9
03300506: RNCC: 5 | RNVC: 9

30 Jan 1985

5340-12-366-5054
Mechanical Stop

123665054
2 0069-764: RNCC: 3 | RNVC: 2
2 0069-764: RNCC: 5 | RNVC: 2

2 May 2005

5340-12-316-2248
Door Handle

123162248
580A688: RNCC: 3 | RNVC: 2
2638138: RNCC: 5 | RNVC: 2
580 A 688: RNCC: 5 | RNVC: 2

2 Jan 1989

5340-12-319-7235
Loop Clamp

123197235
DIN3016-1-D1-6X9-W5-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-6X9-W5: RNCC: 3 | RNVC: 2
RSGU1.6/9-W5: RNCC: 3 | RNVC: 2
RSGU1-6/9-W5: RNCC: 5 | RNVC: 2
RSGU1.6/9-W5: RNCC: 5 | RNVC: 2
DIN3016-D1-6X9-W5: RNCC: 5 | RNVC: 9
VG95931-D6X9-W5: RNCC: 5 | RNVC: 9

27 Oct 1989

5340-12-313-4292
Access Door

123134292
2300194-181320.000: RNCC: 3 | RNVC: 2
2300194-181320.000: RNCC: 5 | RNVC: 9
9843576: RNCC: 5 | RNVC: 9
2300194-181320.000: RNCC: 5 | RNVC: 9

30 Mar 1988

5340-12-338-8323
Angle Bracket

123388323
463-069102.004: RNCC: 3 | RNVC: 9
9901333: RNCC: 5 | RNVC: 9

30 Aug 1995

5340-12-316-1637
Support Hook

123161637
NO PRIMARY REF 12-316-1637: RNCC: 3 | RNVC: 2
001-02.01-7.009-4.00: RNCC: 5 | RNVC: 9

28 Dec 1988

5340-12-313-6938
Angle Bracket

123136938
P-086452-406: RNCC: 3 | RNVC: 2
P086452-406: RNCC: 5 | RNVC: 2

26 Apr 1988

5340-12-322-9352
Mounting Plate

123229352
702-143212-001-0: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-12-192-6104
Angle Bracket

121926104
632-771000.04.0: RNCC: 3 | RNVC: 2
632-771000-04-0: RNCC: 5 | RNVC: 2

10 May 1982

5340-12-336-6730
Mounting Plate

123366730
181733202: RNCC: 2 | RNVC: 2
181733202: RNCC: 3 | RNVC: 2
E181733202: RNCC: 5 | RNVC: 9

7 Dec 1994

5340-12-365-3919
Mounting Plate

123653919
7801282941: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-12-354-3272
Access Cover

123543272
742641: RNCC: 3 | RNVC: 2
06460P002021: RNCC: 5 | RNVC: 2

2 Jul 2001

5340-12-357-1730
Spring Tension Clip

123571730
DIN20043-KA3-32-FEDERSTAHL: RNCC: 2 | RNVC: 2

15 May 2002

5340-12-361-2559
Mounting Bracket

123612559
51192020155: RNCC: 3 | RNVC: 2
51.19202-0155: RNCC: 5 | RNVC: 2

10 Sep 2003

5340-12-343-0971
Rod End Connector

123430971
5092-149: RNCC: 3 | RNVC: 2

28 Apr 1997

5340-12-198-8222
Nonmetallic Bumper

121988222
5801758-0300.11: RNCC: 2 | RNVC: 2
5801758-0300.11: RNCC: 3 | RNVC: 2

28 Feb 1984

5340-12-168-1721
Dust And Moisture Seal Protective Cap

121681721
4A082-0204: RNCC: 3 | RNVC: 2

23 Feb 1977

5340-12-301-1971
Nonmetallic Bumper

123011971
4700050: RNCC: 3 | RNVC: 2
MO 241 5180: RNCC: 5 | RNVC: 2
TK-BA35-5340-366: RNCC: 5 | RNVC: 2

27 Sep 1984

5340-12-330-0795
Clamping Catch

123300795
10.1702-7MM SICHERUNGSDRAHTLOCH: RNCC: 3 | RNVC: 2
2996.69.76: RNCC: 5 | RNVC: 2

30 Oct 1992

5340-12-192-7780
Shimmy Damper

121927780
2500193-300000.003.0: RNCC: 2 | RNVC: 2
05.113.96.05.0: RNCC: 3 | RNVC: 2
500 930/795: RNCC: 3 | RNVC: 2
1 072 0134 00: RNCC: 3 | RNVC: 2
2500193-300000.003.0: RNCC: 5 | RNVC: 2
2500193-300000.003.0: RNCC: 5 | RNVC: 2
0511396050: RNCC: 5 | RNVC: 2
ML10054: RNCC: 5 | RNVC: 2
500 930/795: RNCC: 5 | RNVC: 9

24 May 1982

5340-12-331-8447
Mounting Bracket

123318447
160-740224-04: RNCC: 3 | RNVC: 2
160-740224-04: RNCC: 5 | RNVC: 9

28 Jun 1993

5340-12-354-8215
Mounting Bracket

123548215
J28230072-403: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-043-2721

5340-12-331-1933
Mounting Bracket

123311933
706-154000-001-0: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-12-384-1543
Loop Clamp

123841543
DIN3016-1-D2-22-22X15-W1-2-CR: RNCC: 2 | RNVC: 2

27 Jan 2011

5340-12-193-8505
Retaining Clip

121938505
23111-9406.09: RNCC: 3 | RNVC: 2
23111-9406-09: RNCC: 5 | RNVC: 9
23111-9406.09: RNCC: 5 | RNVC: 9
23111-9406-09: RNCC: 5 | RNVC: 9
23111-9406.09: RNCC: 5 | RNVC: 9

7 Sep 1982

5340-12-358-9314
Expansion Plug

123589314
DIN470-40-ST-A3P: RNCC: 2 | RNVC: 2

29 Nov 2002

5340-12-386-9591
Access Cover

123869591
05546816: RNCC: 3 | RNVC: 2
CV190406: RNCC: 5 | RNVC: 2
05546816: RNCC: 5 | RNVC: 2

20 Oct 2011

5340-12-359-5937
Mounting Bracket

123595937
AZ8149G024MB: RNCC: 3 | RNVC: 2
AZ8149G024MB: RNCC: 3 | RNVC: 9

19 Feb 2003

5340-12-323-3506
Mounting Plate

123233506
525146: RNCC: 2 | RNVC: 2
525146: RNCC: 3 | RNVC: 2
525146: RNCC: 5 | RNVC: 2
525146: RNCC: 5 | RNVC: 9

16 Nov 1990

5340-12-342-1583
Mounting Plate

123421583
536L02041: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-12-134-9683

5340-12-702-0035
Loop Clamp

127020035
VG95211-ML-127020035: RNCC: 2 | RNVC: 2
1667S50-33: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-385-2587
Mending Plate

123852587
F1.1289-47-02-00.20-00: RNCC: 3 | RNVC: 2

13 May 2011

5340-12-361-4902
Mounting Plate

123614902
0001-200010-000-0: RNCC: 3 | RNVC: 2
0001-200010-000-0: RNCC: 5 | RNVC: 9

8 Oct 2003

5340-12-702-2050
Blank Panel

127022050
VG95211-ML-127022050: RNCC: 2 | RNVC: 2
30.7211.280.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-160-0581
Clamping Catch

121600581
25704-190410.03.0: RNCC: 2 | RNVC: 2
25704-190410.03.0: RNCC: 3 | RNVC: 2
25704-190410-03-0: RNCC: 5 | RNVC: 2
25704-190410-03-0: RNCC: 5 | RNVC: 9
25704-190410.03.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-386-2178
Loop Clamp

123862178
DIN3016-1-D1-28X20-W1-2-NBR: RNCC: 2 | RNVC: 2

17 Aug 2011

5340-12-346-0207
Mounting Bracket

123460207
23176-262452.00.0: RNCC: 3 | RNVC: 2

29 May 1998

5340-12-141-5293
Blatt- Feder

5340-12-141-7115
Hand- Kurbel

5340-12-142-3701
Gurtgewebe- Riemen

5340-12-143-7742
Zugangs- Klappe

5340-12-344-9124
Loop Clamp

123449124
499.021: RNCC: 3 | RNVC: 2
5046454: RNCC: 5 | RNVC: 2

12 Jan 1998

5340-12-315-4546
Access Hole Frame

123154546
1079937: RNCC: 2 | RNVC: 2
1079937: RNCC: 3 | RNVC: 2

26 Oct 1988

5340-12-315-3943
Mounting Bracket

123153943
2996.51.98: RNCC: 3 | RNVC: 2

19 Oct 1988

5340-12-377-1728
Suction Cup

123771728
BO 601.01: RNCC: 3 | RNVC: 2

16 Dec 2008

5340-12-315-4043
Dust And Moisture Seal Protective Cap

123154043
1460508302: RNCC: 3 | RNVC: 2

19 Oct 1988

5340-12-325-7769
Snap Hook

123257769
2450-I-S120X11: RNCC: 3 | RNVC: 9

8 Jul 1991

5340-12-174-6853
Shock Mount Pad

121746853
MP 200 B: RNCC: 3 | RNVC: 2
MP200B: RNCC: 5 | RNVC: 2

19 Jul 1978

5340-12-386-2665
Mounting Plate

123862665
2500262-531800.004.0: RNCC: 3 | RNVC: 2

19 Aug 2011

5340-12-164-5204
Screw Hook

121645204
23290-121070.001: RNCC: 2 | RNVC: 2
23290-121070.001: RNCC: 3 | RNVC: 2
23290-121070-001: RNCC: 5 | RNVC: 9
23290-121070.001: RNCC: 5 | RNVC: 9
23290-121070.001: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-5095
Mounting Bracket

127015095
VG95211-ML-127015095: RNCC: 2 | RNVC: 2
5.12.6100.0710.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-148-3219
Hand Crank

121483219
VG85087-B-125X11-GT: RNCC: 2 | RNVC: 2
VG85087-B-125X11-GT: RNCC: 3 | RNVC: 2
VG85087-B-125X11-GT: RNCC: 3 | RNVC: 2
VG85087-B-125X11-GT: RNCC: 3 | RNVC: 9
B125X11VG85087GTW40: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-362-2722
Angle Bracket

123622722
J92228274-003: RNCC: 3 | RNVC: 2

2 Feb 2004

5340-12-135-6805
Butt Hinge

121356805
DIN7956-32X0,7-30-MS-ST-BK: RNCC: 2 | RNVC: 2
A32DIN7956MS: RNCC: 5 | RNVC: 2
DIN7956-32X0,7-30-MS-BK: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-701-6151
Angle Bracket

127016151
VG95211-ML-127016151: RNCC: 2 | RNVC: 2
5.12.7010.1620.06: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-317-9580
Electrical-Mechanical Equipment Post

123179580
VG95148C5,5XM3X8-2.0402.30-E2A: RNCC: 2 | RNVC: 2
B 2.0402 M3X8: RNCC: 3 | RNVC: 2
2018624: RNCC: 5 | RNVC: 2

30 May 1989

5340-12-366-3964
Lock-Release Lever

123663964
4000001-196477.000: RNCC: 3 | RNVC: 2

20 Apr 2005

5340-12-359-8974
Mounting Plate

123598974
2500298-000700.002.0: RNCC: 3 | RNVC: 2

18 Mar 2003

5340-12-702-4090
Angle Bracket

127024090
VG95211-ML-127024090: RNCC: 2 | RNVC: 2
5.12.6105.1205.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-358-2038
Butt Hinge Leaf

123582038
2500262-191200.001.0: RNCC: 2 | RNVC: 2
2500262-191200.001.0: RNCC: 3 | RNVC: 2

26 Sep 2002

5340-12-358-2048
Manual Control Lever

123582048
2500262-191720.003.0: RNCC: 2 | RNVC: 2
2500262-191720.003.0: RNCC: 3 | RNVC: 2

26 Sep 2002

5340-12-368-5567
Metallic Bumper

123685567
5981-205212.001.0: RNCC: 2 | RNVC: 2
5981-205212.001.0: RNCC: 3 | RNVC: 2

24 Mar 2006

5340-12-339-7025
Nonmetallic Bumper

123397025
2500255-199900.009.0: RNCC: 2 | RNVC: 2
2500255-199900.009.0: RNCC: 3 | RNVC: 2

22 Dec 1995

5340-12-302-7989
Snap Hook

123027989
YK03610803: RNCC: 3 | RNVC: 2
03610803: RNCC: 5 | RNVC: 9
H.B 913SV 1056 1975 03 61 0803: RNCC: 5 | RNVC: 9

30 Jan 1985

5340-12-326-0382
Strap Hinge

123260382
28 180Z: RNCC: 3 | RNVC: 2
28180Z: RNCC: 5 | RNVC: 2
28 180 Z: RNCC: 5 | RNVC: 2

1 Aug 1991

5340-12-300-9198
Mending Plate

123009198
1423-351.15(4): RNCC: 3 | RNVC: 2

12 Sep 1984

5340-12-364-2614
Mounting Bracket

123642614
4374911541: RNCC: 3 | RNVC: 2

4 Sep 2004

5340-12-181-6256
Spring Tension Clip

121816256
CF 453 471 A: RNCC: 2 | RNVC: 2
CF 453 471 A: RNCC: 3 | RNVC: 2
CF 453 471 A: RNCC: 5 | RNVC: 2
CF453471A: RNCC: 5 | RNVC: 2
CF 453 471 A: RNCC: 5 | RNVC: 2
CF453471A: RNCC: 5 | RNVC: 2
CF453471A: RNCC: 5 | RNVC: 2

10 Dec 1979

5340-12-307-9958
Handle Grip

123079958
2418.2213.3: RNCC: 3 | RNVC: 2

18 Aug 1986

5340-12-190-3752
Loop Clamp

121903752
PAN4231CCD5620: RNCC: 3 | RNVC: 2

24 Nov 1981

5340-12-368-9529
Angle Bracket

123689529
1355710: RNCC: 3 | RNVC: 2

9 May 2006

5340-12-172-8897
Nonmetallic Bumper

121728897
823253147A: RNCC: 3 | RNVC: 2
4A0253147A: RNCC: 3 | RNVC: 9

2 Mar 1978

5340-12-319-7790
Dust And Moisture Seal Protective Cap-Plug

123197790
0730 361 073: RNCC: 3 | RNVC: 2
0223152: RNCC: 5 | RNVC: 2
0730361073: RNCC: 5 | RNVC: 2
0730361073: RNCC: 5 | RNVC: 9

3 Nov 1989

5340-12-382-2104
Mending Plate

123822104
4100036-981162.000: RNCC: 2 | RNVC: 2
4100036-981162.000: RNCC: 3 | RNVC: 2

21 May 2010

5340-12-367-4018
Retaining Bail

123674018
943373799: RNCC: 3 | RNVC: 2

15 Aug 2005

5340-12-199-7583
Loop Clamp

121997583
DIN3016-1-D1-41X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-41X15-W1-2: RNCC: 3 | RNVC: 2
RSGU1.41/15: RNCC: 3 | RNVC: 2
9410015041: RNCC: 5 | RNVC: 2
RSGU1100-41/15: RNCC: 5 | RNVC: 2
RSGU1100.41/15: RNCC: 5 | RNVC: 2
VG95931-D41X15-W1: RNCC: 5 | RNVC: 9
DIN3016-D1-41X15-W1-2: RNCC: 5 | RNVC: 9

29 May 1984

5340-12-305-0747
Loop Clamp

123050747
702: RNCC: 3 | RNVC: 2
025-114-2-15-10: RNCC: 5 | RNVC: 2

24 Sep 1985

5340-12-344-3487
Dust And Moisture Seal Protective Cap

123443487
0 0 60 36 90 00: RNCC: 3 | RNVC: 2
06.71819-0117: RNCC: 5 | RNVC: 2
06718190117: RNCC: 5 | RNVC: 2
060369: RNCC: 5 | RNVC: 2

20 Oct 1997

5340-12-316-2464
Handwheel

123162464
GN323-160-K14-D: RNCC: 3 | RNVC: 2

4 Jan 1989

5340-12-188-5297
Retaining Strap

121885297
DIN72571-1X12-1.4301: RNCC: 2 | RNVC: 2
DIN72571-1X12-1.4301: RNCC: 3 | RNVC: 2
1X12DIN72571A2: RNCC: 5 | RNVC: 2

15 Jul 1981

5340-12-305-1127
Nonmetallic Bumper

123051127
4900059-111213.003.0: RNCC: 3 | RNVC: 2

27 Sep 1985

5340-12-301-0098
Spannversch Halter

123010098
4900248-100000: RNCC: 2 | RNVC: 2
7835512: RNCC: 3 | RNVC: 2
7835-512: RNCC: 5 | RNVC: 2

15 Sep 1984

5340-12-197-2167
Webbing Strap

121972167
4200049-17100.03: RNCC: 2 | RNVC: 2
123907: RNCC: 3 | RNVC: 2
400-848.1053.4: RNCC: 5 | RNVC: 2

3 Oct 1983

5340-12-336-1006
Dust And Moisture Seal Protective Plug

123361006
300F2 SW: RNCC: 3 | RNVC: 2
P2537472W: RNCC: 5 | RNVC: 2
W25374-72: RNCC: 5 | RNVC: 2
W2537472: RNCC: 5 | RNVC: 2
300F2 SCHWARZ: RNCC: 5 | RNVC: 2
GPN300,F2 SCHWARZ: RNCC: 5 | RNVC: 2
GPN300-F2-SCHWARZ: RNCC: 5 | RNVC: 2
50411900: RNCC: 5 | RNVC: 2
50411900.984: RNCC: 5 | RNVC: 2

24 Oct 1994

5340-12-389-9255
Dust And Moisture Seal Protective Cover

123899255
202662: RNCC: 3 | RNVC: 2
202662: RNCC: 5 | RNVC: 2

13 Sep 2012

5340-12-306-4672

5340-12-358-0738
Access Cover

123580738
2300042-255155.000: RNCC: 2 | RNVC: 2
2300042-255155.000: RNCC: 3 | RNVC: 2

10 Sep 2002

5340-12-164-5684

5340-12-357-8643
Mounting Bracket

123578643
2300042-255217.000: RNCC: 2 | RNVC: 2
2300042-255217.000: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-12-352-3912
Double Angle Bracket

123523912
2236824000: RNCC: 3 | RNVC: 2
223682-4000: RNCC: 5 | RNVC: 2

14 Nov 2000

5340-12-325-2306
Mounting Plate

123252306
5802031-3010: RNCC: 2 | RNVC: 2
7802071301: RNCC: 3 | RNVC: 2
78020 71301: RNCC: 5 | RNVC: 9

17 May 1991

5340-12-129-8287
Electrical-Mechanical Equipment Post

121298287
R18362: RNCC: 3 | RNVC: 2
4061015: RNCC: 3 | RNVC: 2
4061-015: RNCC: 5 | RNVC: 2
R18362: RNCC: 5 | RNVC: 9
42094-05120: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-188-2638
Manual Control Handle

121882638
4312 712 19430: RNCC: 3 | RNVC: 2
431271219430: RNCC: 5 | RNVC: 2
5801685-212000-01: RNCC: 5 | RNVC: 9
5801685-212000.01: RNCC: 5 | RNVC: 9

23 Jun 1981

5340-12-165-8073
Butt Hinge Leaf

121658073
2572-191330.08.0: RNCC: 2 | RNVC: 2
2572-191330.08.0: RNCC: 3 | RNVC: 2
2572-191330-08-0: RNCC: 5 | RNVC: 2
2572-191330-08-0: RNCC: 5 | RNVC: 9
2572-191330.08.0: RNCC: 5 | RNVC: 9

30 Jun 1976

5340-12-337-7038
Retaining Strap

123377038
M-873: RNCC: 3 | RNVC: 2
1244760640: RNCC: 5 | RNVC: 2

30 Mar 1995

5340-12-350-3399
Mechanical Stop

123503399
2996.10.96: RNCC: 3 | RNVC: 2

17 Mar 2000

5340-12-179-8385
Mounting Bracket

121798385
CF 305 961 B: RNCC: 3 | RNVC: 2
CF 305 961 B: RNCC: 5 | RNVC: 2
CF305961B: RNCC: 5 | RNVC: 2
CF 305 961 B: RNCC: 5 | RNVC: 2
CF305961B: RNCC: 5 | RNVC: 2
CF305961B: RNCC: 5 | RNVC: 2

3 Aug 1979

5340-12-371-9001
Mounting Bracket

123719001
1.504688: RNCC: 3 | RNVC: 2

29 May 2007

5340-12-386-1497
Sliding Door Track

123861497
2481-392830.008.0: RNCC: 2 | RNVC: 2
2481-392830.008.0: RNCC: 3 | RNVC: 2

11 Aug 2011

5340-12-189-4218
Angle Bracket

121894218
CF 429 197 A: RNCC: 3 | RNVC: 2
CF429197A: RNCC: 5 | RNVC: 2
CF429197A: RNCC: 5 | RNVC: 2
CF 429 197 A: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-12-301-6373
Mending Plate

123016373
43712279-601: RNCC: 2 | RNVC: 2
43712279-601: RNCC: 3 | RNVC: 2
43712279-601: RNCC: 5 | RNVC: 2

27 Oct 1984

5340-12-359-7994
Mounting Bracket

123597994
81155010543: RNCC: 3 | RNVC: 2

11 Mar 2003

5340-12-185-2086
Access Cover

121852086
01TC31260: RNCC: 3 | RNVC: 2

20 Sep 1980

5340-12-315-4733
Mending Plate

123154733
316642: RNCC: 3 | RNVC: 2

26 Oct 1988

5340-12-150-3130
Retaining Strap

121503130
C20122-A159-C5: RNCC: 3 | RNVC: 2
C20122A159C5: RNCC: 5 | RNVC: 2
TBK159T5: RNCC: 5 | RNVC: 9
TFS12-98939: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-334-0560
Loop Clamp

123340560
DIN3015-S-A-3-R-30-PP-W1: RNCC: 2 | RNVC: 2
RCPR1-330: RNCC: 3 | RNVC: 2
SPAL5030PP-DPAL-AS: RNCC: 3 | RNVC: 2
RCPR1-330: RNCC: 5 | RNVC: 2
SPAL 5030: RNCC: 5 | RNVC: 9

15 Mar 1994

5340-12-188-4654
Butt Hinge

121884654
023-100121-00-0: RNCC: 3 | RNVC: 2

13 Jul 1981

5340-12-331-8413
Mending Plate

123318413
480-7383-02-00-00-33,35: RNCC: 3 | RNVC: 2
480/7383-02-00-00/33,35: RNCC: 5 | RNVC: 2

28 Jun 1993

5340-12-300-2320
Strap Bolt

123002320
23114-0411.02: RNCC: 2 | RNVC: 2
23114-0411.02: RNCC: 3 | RNVC: 2
23114-0411-02: RNCC: 5 | RNVC: 9
23114-0411.02: RNCC: 5 | RNVC: 9
23114-0411-02: RNCC: 5 | RNVC: 9

17 Jul 1984

5340-12-327-0817
Mending Plate

123270817
5801984-200100.007.0: RNCC: 2 | RNVC: 2
5801984-200100.007.0: RNCC: 3 | RNVC: 2

28 Nov 1991

5340-12-391-2620
Helical Compression Spring Retainer

123912620
7172281: RNCC: 3 | RNVC: 2

28 Feb 2013

5340-12-324-1341
Mending Plate

123241341
0213 1303: RNCC: 3 | RNVC: 2

23 Jan 1991

5340-12-371-7948
Angle Bracket

123717948
6029301034: RNCC: 3 | RNVC: 2
7393540: RNCC: 5 | RNVC: 2

16 May 2007

5340-12-367-7476
Dust And Moisture Seal Boot

123677476
04080300: RNCC: 3 | RNVC: 2

6 Oct 2005

5340-12-304-7314
Door Button

123047314
602E121: RNCC: 3 | RNVC: 2

16 Aug 1985

5340-12-353-1928
Double Angle Bracket

123531928
VG95211-ML-123531928: RNCC: 2 | RNVC: 2
160-77922: RNCC: 3 | RNVC: 2

8 Feb 2001

5340-12-178-6841
Expansion Plug

121786841
DIN443-A13-ST-A3P: RNCC: 2 | RNVC: 2
000443013002: RNCC: 5 | RNVC: 2
A13DIN443A2E: RNCC: 5 | RNVC: 2
000443013002: RNCC: 5 | RNVC: 2

9 May 1979

5340-12-340-8455
Protection Bellows

123408455
909730536: RNCC: 2 | RNVC: 2
909730536: RNCC: 3 | RNVC: 2
E909730536: RNCC: 5 | RNVC: 2

21 Jun 1996

5340-12-322-1164
Nonmetallic Bumper

123221164
9000 8196: RNCC: 3 | RNVC: 2

25 Jul 1990

5340-12-387-0436
Block Clamp

123870436
290 07379: RNCC: 3 | RNVC: 2
29007379: RNCC: 5 | RNVC: 2

28 Oct 2011

5340-12-303-9401
Dust And Moisture Seal Protective Plug

123039401
2683: RNCC: 3 | RNVC: 2

23 May 1985

5340-12-341-7669
Webbing Strap

123417669
5000.2538: RNCC: 3 | RNVC: 2

24 Oct 1996

5340-12-153-8797
Mending Plate

121538797
530016: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-161-2102
Retaining Strap

121612102
160-740674: RNCC: 3 | RNVC: 2
160-740674: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-167-5275
Compression Cup

121675275
3664625096: RNCC: 3 | RNVC: 2

3 Jan 1977

5340-12-315-3982
Rod End Clevis

123153982
RP988883: RNCC: 3 | RNVC: 2
1019269S00: RNCC: 5 | RNVC: 2

19 Oct 1988

5340-12-179-6573
Spring Tension Clip

121796573
5240074: RNCC: 3 | RNVC: 2

13 Jul 1979

5340-12-340-1124
Mounting Bracket

123401124
1212 6125: RNCC: 3 | RNVC: 2

28 Feb 1996

5340-12-393-1396
Pipe Hanger

123931396
06.67700-2304: RNCC: 3 | RNVC: 2
06.67700-2304: RNCC: 5 | RNVC: 2
441.08.041: RNCC: 5 | RNVC: 2

13 Aug 2013

5340-12-392-4728
Rigid Caster

123924728
661.05.311: RNCC: 3 | RNVC: 2

12 Jun 2013

5340-12-166-9342
Feststellvorrichtun

121669342
137AFF185: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-12-163-1789
Handle Grip

121631789
PI03-140-13: RNCC: 3 | RNVC: 2
1918-041405-13: RNCC: 5 | RNVC: 2
1918-041405-13: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-313-3394
Manual Control Handle

123133394
2300194-181630.000: RNCC: 3 | RNVC: 2
2300194-181630.000: RNCC: 5 | RNVC: 9
9843628: RNCC: 5 | RNVC: 9
2300194-181630.000: RNCC: 5 | RNVC: 9

23 Mar 1988

5340-12-162-2052
Resilient Mount

121622052
DIN95363-D30X25-NR55ST: RNCC: 4 | RNVC: 1
505013-M8X20.NR55.ST: RNCC: 5 | RNVC: 2
BI5-20: RNCC: 5 | RNVC: 9
VG95363-D30X25-NR55ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-341-4369
Mounting Bracket

123414369
23-120-JN-63: RNCC: 3 | RNVC: 2

5 Sep 1996

5340-12-307-9754
Mending Plate

123079754
0A846.92-01-20-00-009: RNCC: 3 | RNVC: 2

15 Aug 1986

5340-12-330-0793
Plain Solid Disk

123300793
0057653: RNCC: 3 | RNVC: 2
0057-653: RNCC: 5 | RNVC: 2
8403937: RNCC: 5 | RNVC: 2

30 Oct 1992

5340-12-301-8885
Double Angle Bracket

123018885
20-5220-098: RNCC: 3 | RNVC: 2

15 Nov 1984

5340-12-162-8836
Retaining Strap

121628836
22 142-001: RNCC: 3 | RNVC: 2
22142-001: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-322-5878
Kunst Gleitschiene

123225878
0786172: RNCC: 3 | RNVC: 2
0786172: RNCC: 5 | RNVC: 9

4 Sep 1990

5340-12-022-3267

5340-12-198-7464
Metal Runner

121987464
5801998-410000.05: RNCC: 2 | RNVC: 2
5801998-410000.05: RNCC: 3 | RNVC: 2

22 Feb 1984

5340-12-356-2505
Multiple Angle Bracket

123562505
6600218-3501: RNCC: 3 | RNVC: 2

5 Feb 2002

5340-12-190-2812
Electrical-Mechanical Equipment Post

121902812
VG95148B5,5XM2X10-AL: RNCC: 2 | RNVC: 2
4510382: RNCC: 3 | RNVC: 2
VG95148B5,5XM2X10-AL: RNCC: 3 | RNVC: 2
451.0382: RNCC: 5 | RNVC: 2

17 Nov 1981

5340-12-198-1448
Retaining Strap

121981448
269012120026: RNCC: 3 | RNVC: 2
269012120026: RNCC: 5 | RNVC: 2
9012.12-26: RNCC: 5 | RNVC: 2

22 Dec 1983

5340-12-174-4735
Mending Plate

121744735
DIN15058-40X10: RNCC: 2 | RNVC: 2
40X10DIN15058: RNCC: 5 | RNVC: 2

3 Jul 1978

5340-12-358-2399
Multiple Angle Bracket

123582399
J92222443-003: RNCC: 3 | RNVC: 2

1 Oct 2002

5340-12-306-2896
Mending Plate

123062896
E4-2007440: RNCC: 3 | RNVC: 2
E4-2007440: RNCC: 5 | RNVC: 9

17 Feb 1986

5340-12-342-6171
Clamping Catch

123426171
U100-3311-500: RNCC: 2 | RNVC: 2
U100-3311-500: RNCC: 3 | RNVC: 2

7 Mar 1997

5340-12-330-6171
Hand Crank

123306171
343754440: RNCC: 3 | RNVC: 2
DIN469-D125X12-AL/FS: RNCC: 4 | RNVC: 1
340054440: RNCC: 5 | RNVC: 2

18 Jan 1993

5340-12-148-4469
Dust And Moisture Seal Protective Plug

121484469
471A003: RNCC: 3 | RNVC: 2
2628284: RNCC: 5 | RNVC: 2
3K1406: RNCC: 5 | RNVC: 2
2628-284: RNCC: 5 | RNVC: 2
0009880228: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-317-3842
Electrical-Mechanical Equipment Post

123173842
4900064-41212.006: RNCC: 3 | RNVC: 2

4 Apr 1989

5340-12-370-6444
Dust And Moisture Seal Protective Plug

123706444
350I24: RNCC: 3 | RNVC: 2
GPN 350I24: RNCC: 5 | RNVC: 2
350I24: RNCC: 5 | RNVC: 2
GPN350I24: RNCC: 5 | RNVC: 9

5 Dec 2006

5340-12-391-2790
Runner

123912790
101885: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-12-392-0048
Access Cover

123920048
I006171TAN686A: RNCC: 3 | RNVC: 2

25 Apr 2013

5340-12-364-5726
Mounting Bracket

123645726
T257M2123101: RNCC: 2 | RNVC: 2
T257M2123101: RNCC: 3 | RNVC: 2

12 Oct 2004

5340-12-305-3127
Loop Clamp

123053127
301115: RNCC: 3 | RNVC: 2

21 Oct 1985

5340-12-371-3191
Angle Bracket

123713191
1216 1547: RNCC: 3 | RNVC: 2

14 Mar 2007

5340-12-314-5716
Access Cover

123145716
5588138: RNCC: 3 | RNVC: 2

20 Jul 1988

5340-12-168-5412
Dust And Moisture Seal Protective Plug

121685412
211831439: RNCC: 3 | RNVC: 9

18 Mar 1977

5340-12-384-2190
Track Stop

123842190
17404: RNCC: 3 | RNVC: 2

3 Feb 2011

5340-12-316-3434
Support Hook

123163434
T50537: RNCC: 3 | RNVC: 2
T50537: RNCC: 5 | RNVC: 9

11 Jan 1989

5340-12-041-7714

5340-12-306-3994
Mending Plate

123063994
V22.917.22-2: RNCC: 3 | RNVC: 2

26 Feb 1986

5340-12-342-8880
Access Cover

123428880
1203 3484: RNCC: 3 | RNVC: 2
3.0219.01.9.0020: RNCC: 5 | RNVC: 9

14 Apr 1997

5340-12-359-9388
Double Angle Bracket

123599388
2500261-820000.016.0: RNCC: 2 | RNVC: 2
2500261-820000.016.0: RNCC: 3 | RNVC: 2

21 Mar 2003

5340-12-178-9017
Mounting Bracket

121789017
CF 417 378 C: RNCC: 3 | RNVC: 2
CF417378C: RNCC: 5 | RNVC: 2
CF 417 378 C: RNCC: 5 | RNVC: 2
CF417378C: RNCC: 5 | RNVC: 2
CF 417 378 C: RNCC: 5 | RNVC: 2
CF417378C: RNCC: 5 | RNVC: 2

25 May 1979

5340-12-317-3199
Angle Bracket

123173199
4900064-4121.005: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-167-6043
Dust And Moisture Seal Protective Cap

121676043
30-79501-0008: RNCC: 3 | RNVC: 2

5 Jan 1977

5340-12-393-5978
Plug Button

123935978
11.44088-0059: RNCC: 3 | RNVC: 2
11.44088-0059: RNCC: 5 | RNVC: 2
440.08.B08: RNCC: 5 | RNVC: 2

26 Sep 2013

5340-12-320-1018
Angle Bracket

123201018
C249-A15-C146: RNCC: 3 | RNVC: 2

7 Dec 1989

5340-12-188-3474
Electrical-Mechanical Equipment Post

121883474
VG95148A6XM3X92-3.1645.51ALODINE: RNCC: 3 | RNVC: 2
E5030-0100-0002: RNCC: 3 | RNVC: 2
5030-0100-0002: RNCC: 5 | RNVC: 2

2 Jul 1981

5340-12-321-7923
Metal Runner

123217923
P-886716-002: RNCC: 3 | RNVC: 2
P886716-002: RNCC: 5 | RNVC: 2

27 Jun 1990

5340-12-357-5430
Dust And Moisture Seal Protective Plug

123575430
TL-2-213: RNCC: 3 | RNVC: 2
7956106047: RNCC: 5 | RNVC: 2

1 Jul 2002

5340-12-196-4334
Casement Fastener

121964334
P-855943-007: RNCC: 3 | RNVC: 2
P855943-007: RNCC: 5 | RNVC: 2

6 Jul 1983

5340-12-144-9525
Loop Clamp

121449525
20TAN15801-3-1364-5: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-319-9085
Dust And Moisture Seal Protective Cap

123199085
040-0001-034-009: RNCC: 3 | RNVC: 2

16 Nov 1989

5340-12-701-1624
Mounting Bracket

127011624
VG95211-ML-127011624: RNCC: 2 | RNVC: 2
5.12.0236.1024.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-344-3753
Angle Bracket

123443753
A-296771-065: RNCC: 3 | RNVC: 2
A296771-065: RNCC: 5 | RNVC: 2

21 Oct 1997

5340-12-701-4741
Mounting Plate

127014741
VG95211-ML-127014741: RNCC: 2 | RNVC: 2
5.12.5805.0110.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-319-9140
Electrical-Mechanical Equipment Post

123199140
6100125-0232: RNCC: 2 | RNVC: 2
VG95148C8XM4X50-ST: RNCC: 2 | RNVC: 2
VG95148C8XM4X50-ST: RNCC: 3 | RNVC: 2

16 Nov 1989

5340-12-344-4212
Access Cover

123444212
272-406810: RNCC: 3 | RNVC: 2
272.406.810: RNCC: 5 | RNVC: 2

27 Oct 1997

5340-12-320-2197
Electrical-Mechanical Equipment Post

123202197
VG95148B19XM8X62-ST: RNCC: 2 | RNVC: 2
VG95148B19XM8X62-ST: RNCC: 3 | RNVC: 2
5802102-206000.01: RNCC: 5 | RNVC: 9
5802102-206000.01: RNCC: 5 | RNVC: 9

19 Dec 1989

5340-12-311-8824
Access Cover

123118824
5801321-3000.02: RNCC: 2 | RNVC: 2
5801321-3000.02: RNCC: 3 | RNVC: 2
5801321-3000.02: RNCC: 5 | RNVC: 9

27 Oct 1987

5340-12-365-5220
Nonmetallic Bumper

123655220
J53230643-004: RNCC: 3 | RNVC: 2

12 Jan 2005

5340-12-371-7010
Snap Hook

123717010
MEL300-D1-004: RNCC: 3 | RNVC: 2

7 May 2007

5340-12-158-4647
Loop Clamp

121584647
04-54004-00-01-000: RNCC: 3 | RNVC: 2
54-7000-148-00: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-187-2104
Loop Clamp

121872104
PAN4264-50: RNCC: 3 | RNVC: 2

11 Mar 1981

5340-12-191-8961
Resilient Mount

121918961
PAN5174C03: RNCC: 3 | RNVC: 2

16 Mar 1982

5340-12-353-1162
Loop Clamp

123531162
EN4113F14WH: RNCC: 2 | RNVC: 2

30 Jan 2001

5340-12-392-3601
Retaining Strap

123923601
I011150: RNCC: 3 | RNVC: 2

29 May 2013

5340-12-374-2919
Access Cover

123742919
5325191: RNCC: 3 | RNVC: 2

6 Feb 2008

5340-12-374-2575
Sliding Block

123742575
L521M1059232: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-385-0709
Loop Clamp

123850709
X00005947: RNCC: 3 | RNVC: 2

27 Apr 2011

5340-12-375-5829
Angle Bracket

123755829
L258M2007101: RNCC: 3 | RNVC: 2

16 Jun 2008

5340-12-356-0913
Nut And Bolt Locking Plate

123560913
4616830214: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-12-316-7314
Door Button

123167314
51-53236: RNCC: 3 | RNVC: 2

8 Feb 1989

5340-12-136-5768

5340-12-040-6190

5340-12-305-0550
Angle Bracket

123050550
A-230329-027: RNCC: 3 | RNVC: 2
A230329-027: RNCC: 5 | RNVC: 2

23 Sep 1985

5340-12-390-5360
Nut And Bolt Head Protective Cap

123905360
M80-B-G100: RNCC: 3 | RNVC: 2

21 Nov 2012

5340-12-163-0000
Retaining Strap

121630000
VG95933ER-50-W1-BK: RNCC: 2 | RNVC: 2
1/2D50MMN325: RNCC: 3 | RNVC: 2
MMN325-1-2D9-50: RNCC: 5 | RNVC: 2
MMN325-1-2D9-50: RNCC: 5 | RNVC: 2
1-2D50MMN325: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-190-2720
Mounting Bracket

121902720
02-0899-180610.01.0: RNCC: 3 | RNVC: 2
02-0899-180610-01-0: RNCC: 5 | RNVC: 2

17 Nov 1981

5340-12-137-5143
Expansion Shield

121375143
N6/25: RNCC: 3 | RNVC: 2
004: RNCC: 5 | RNVC: 2
N6-25: RNCC: 5 | RNVC: 2
N5X25: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-184-0331
Dust And Moisture Seal Protective Cap

121840331
111941605: RNCC: 3 | RNVC: 2
0008260824: RNCC: 5 | RNVC: 2
9GH116966-00: RNCC: 5 | RNVC: 2

14 Jun 1980

5340-12-321-4775
Butt Hinge Leaf

123214775
A00-0027-02: RNCC: 3 | RNVC: 2

22 May 1990

5340-12-164-1373
Butt Hinge Leaf

121641373
160-28520-04: RNCC: 3 | RNVC: 2
160-28520-04: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-379-0836
Dust And Moisture Seal Protective Cap-Plug

123790836
D0110524-001: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-12-386-4686
Access Cover

123864686
V6520-05022-101: RNCC: 3 | RNVC: 2

5 Sep 2011

5340-12-313-9298
Shimmy Damper

123139298
065722: RNCC: 3 | RNVC: 2
03-08-080-103-0100N: RNCC: 5 | RNVC: 2

20 May 1988

5340-12-320-3972
Access Cover

123203972
0336 2504: RNCC: 3 | RNVC: 2
03362504EC0150-01: RNCC: 5 | RNVC: 2
3362504: RNCC: 5 | RNVC: 2
89233158: RNCC: 5 | RNVC: 2

10 Jan 1990

5340-12-343-5669
Retaining Strap

123435669
50031001070: RNCC: 3 | RNVC: 2
F300 0T 022 4070: RNCC: 6 | RNVC: 9

3 Jul 1997

5340-12-379-3906
Dust And Moisture Seal Protective Cap

123793906
86030A: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-12-380-9935
Filler Opening Cap

123809935
K21522133140: RNCC: 3 | RNVC: 2

21 Dec 2009

5340-12-393-3030
Grooved Clamp Coupling Ferrule

123933030
0637 100 838: RNCC: 3 | RNVC: 2

5 Sep 2013

5340-12-319-3163
Loop Clamp

123193163
532117-8203.000: RNCC: 3 | RNVC: 2
532117-8203.000: RNCC: 5 | RNVC: 9

22 Sep 1989

5340-12-390-7467
Loop Clamp

123907467
0541066: RNCC: 3 | RNVC: 2

7 Dec 2012

5340-12-359-4021
Plug Button

123594021
6202680357: RNCC: 3 | RNVC: 2

31 Jan 2003

5340-12-165-7975
Resilient Mount

121657975
36 055-001: RNCC: 3 | RNVC: 2
36055-001: RNCC: 5 | RNVC: 2

26 Jun 1976

5340-12-702-6032
Loop Clamp

127026032
VG95211-ML-127026032: RNCC: 2 | RNVC: 2
5192A-16: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-380-6637
Spring Tension Clip

123806637
0008330065: RNCC: 3 | RNVC: 2

17 Nov 2009

5340-12-134-3770
Shimmy Damper

121343770
6186257: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-356-0921
Double Angle Bracket

123560921
4619340010: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-12-316-5943
Spring Tension Clip

123165943
0939159000: RNCC: 3 | RNVC: 2

26 Jan 1989

5340-12-321-2853
Sliding Door Hanger

123212853
251843336B: RNCC: 3 | RNVC: 9

27 Apr 1990

5340-12-378-2626
Angle Bracket

123782626
5559509: RNCC: 3 | RNVC: 2

24 Mar 2009

5340-12-369-0525
Mounting Plate

123690525
4405500639: RNCC: 3 | RNVC: 2

17 May 2006

5340-12-301-6905
Mending Plate

123016905
250196E40001: RNCC: 3 | RNVC: 2
250196: RNCC: 5 | RNVC: 2

1 Nov 1984

5340-12-373-1710
Nonmetallic Bumper

123731710
1163280584: RNCC: 3 | RNVC: 2
116 328 05 84: RNCC: 5 | RNVC: 2

5 Oct 2007

5340-12-022-7564

5340-12-165-4420
Dust And Moisture Seal Protective Cap-Plug

121654420
610U22: RNCC: 3 | RNVC: 2
909735139: RNCC: 5 | RNVC: 2
GPN610U22: RNCC: 5 | RNVC: 2
GPN610U22: RNCC: 5 | RNVC: 2
U22GPN610: RNCC: 5 | RNVC: 9
U22: RNCC: 5 | RNVC: 9
GPN610,U22: RNCC: 5 | RNVC: 9
610002200: RNCC: 5 | RNVC: 9

4 May 1976

5340-12-355-3801
Door Handle

123553801
1000-U58: RNCC: 3 | RNVC: 2

8 Nov 2001

5340-12-387-6602
Loop Clamp

123876602
0117 6012: RNCC: 3 | RNVC: 2

20 Jan 2012

5340-12-323-8351
Access Cover

123238351
1229-602: RNCC: 2 | RNVC: 2
JB-380: RNCC: 3 | RNVC: 2

21 Dec 1990

5340-12-194-5383
Headless Grooved Rod

121945383
211843719C: RNCC: 3 | RNVC: 2

15 Nov 1982

5340-12-308-3310
Angle Bracket

123083310
42205217: RNCC: 3 | RNVC: 2
42205217ED5067-01: RNCC: 5 | RNVC: 2

26 Sep 1986

5340-12-350-7331
Angle Bracket

123507331
13247501: RNCC: 3 | RNVC: 2

12 May 2000

5340-12-172-1613
Bridge Clamp

121721613
2360-261680.03.0: RNCC: 2 | RNVC: 2
2360-261680-03-0: RNCC: 5 | RNVC: 2
2360-261680.03.0: RNCC: 5 | RNVC: 2
2360-261680.03.0: RNCC: 5 | RNVC: 2
2360-261680-03-0: RNCC: 5 | RNVC: 9
2360-261680.03.0: RNCC: 5 | RNVC: 9

27 Dec 1977

5340-12-333-0263
Snap Hook

123330263
60-1 VERNICKELT: RNCC: 3 | RNVC: 9
60-1: RNCC: 5 | RNVC: 9
87-1: RNCC: 5 | RNVC: 9
87-1 VERNICKELT: RNCC: 5 | RNVC: 9

21 Oct 1993

5340-12-372-5543
Nonmetallic Solid Wheel

123725543
POA 50/8G: RNCC: 3 | RNVC: 2

27 Jul 2007

5340-12-318-8428
Catch Strike

123188428
2654-331200.01: RNCC: 2 | RNVC: 2
2654-331200.01: RNCC: 3 | RNVC: 2
2654-331 200.01: RNCC: 5 | RNVC: 9
679-01020000.01: RNCC: 5 | RNVC: 9
679-01020000.01: RNCC: 5 | RNVC: 9

22 Aug 1989

5340-12-390-4066
Section Block Clamp

123904066
80.875.05078.000: RNCC: 3 | RNVC: 2
80.875.05078.000: RNCC: 5 | RNVC: 2

8 Nov 2012

5340-12-358-0135
Spring Tension Clip

123580135
0089886778: RNCC: 3 | RNVC: 2

2 Sep 2002

5340-12-319-6089
Dust And Moisture Seal Protective Plug

123196089
03064402: RNCC: 3 | RNVC: 2

18 Oct 1989

5340-12-701-8501
Loop Clamp

127018501
VG95211-ML-127018501: RNCC: 2 | RNVC: 2
5192A-14: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-327-6926
Angle Bracket

123276926
C39166-A34-C4: RNCC: 3 | RNVC: 2

19 Feb 1992

5340-12-382-1625
Flush Lock

123821625
312-114400F91: RNCC: 3 | RNVC: 2

18 May 2010

5340-12-322-2750
Loop Clamp

123222750
DIN3015-LG-2R-12,7-PP-W1: RNCC: 2 | RNVC: 2
HRL2A1 12,7PP STMZN: RNCC: 3 | RNVC: 2
RAPR16-2 1/2: RNCC: 3 | RNVC: 2
2127PP-DP-AS: RNCC: 3 | RNVC: 2
2127-PP-DP-AS: RNCC: 5 | RNVC: 2
RAPR16-2 1/2: RNCC: 5 | RNVC: 2
DIN3015-LG2R-12,7-PP-W1: RNCC: 5 | RNVC: 2

7 Aug 1990

5340-12-360-4110
Rod End Clevis

123604110
1834464502: RNCC: 3 | RNVC: 2
1834464502: RNCC: 5 | RNVC: 2

19 May 2003

5340-12-348-6070
Bridge Clamp

123486070
504 419 44: RNCC: 3 | RNVC: 2

26 Jul 1999

5340-12-310-3324
Access Hole Frame

123103324
FAAB002: RNCC: 3 | RNVC: 2
FA AB 002: RNCC: 5 | RNVC: 2

11 May 1987

5340-12-158-6169
Retaining Strap

121586169
51974010167: RNCC: 3 | RNVC: 2
R43: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-358-7347
Access Cover

123587347
061904: RNCC: 3 | RNVC: 2
061 904: RNCC: 5 | RNVC: 2

11 Nov 2002

5340-12-370-3317
Access Cover

123703317
1215 7636: RNCC: 3 | RNVC: 2

26 Oct 2006

5340-12-375-5676
Pad Eye

123755676
S259M6077218: RNCC: 3 | RNVC: 2

13 Jun 2008

5340-12-306-2623
Flush Lock

123062623
253829211: RNCC: 3 | RNVC: 9

12 Feb 1986

5340-12-326-3818
Resilient Mount

123263818
4602405718: RNCC: 3 | RNVC: 2
460 240 57 18: RNCC: 5 | RNVC: 2
460 240 57 18: RNCC: 5 | RNVC: 2

9 Sep 1991

5340-12-307-1573
Nonmetallic Bumper

123071573
4169875139: RNCC: 3 | RNVC: 2

15 May 1986

5340-12-341-6432
Metallic Bumper

123416432
81.91001.0072: RNCC: 3 | RNVC: 2
81-91001-0072: RNCC: 5 | RNVC: 2

9 Oct 1996

5340-12-353-4560
Multiple Angle Bracket

123534560
S27013/01-4-1-8: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-12-333-0670
Helical Compression Spring Seat

123330670
1202 9658: RNCC: 3 | RNVC: 2
12029658EE0111-90: RNCC: 5 | RNVC: 2
1202 9658: RNCC: 5 | RNVC: 9
12029658: RNCC: 5 | RNVC: 9
3.601.9.342.003.4: RNCC: 5 | RNVC: 9

26 Oct 1993

5340-12-149-0942
Angle Bracket

121490942
121F07002: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-314-0856
Mending Plate

123140856
43712665-601: RNCC: 2 | RNVC: 2
43712665-601: RNCC: 3 | RNVC: 2

4 Jun 1988

5340-12-368-4911
Access Cover

123684911
570025336: RNCC: 3 | RNVC: 2

16 Mar 2006

5340-12-342-3235
Mechanic Equipment Hardware Kit

123423235
6041.6699.03: RNCC: 3 | RNVC: 2

22 Jan 1997

5340-12-040-1267

5340-12-391-4833
Mounting Plate

123914833
I007248: RNCC: 3 | RNVC: 2

14 Mar 2013

5340-12-326-4550
Angle Bracket

123264550
3963120787: RNCC: 3 | RNVC: 2

18 Sep 1991

5340-12-312-0149
Escutcheon Plate

123120149
251857616: RNCC: 3 | RNVC: 2
81.97001.0284: RNCC: 5 | RNVC: 2
81970010284: RNCC: 5 | RNVC: 2

10 Nov 1987

5340-12-192-3142
Butt Hinge

121923142
42203961: RNCC: 3 | RNVC: 2
42203961EZ5511-52: RNCC: 5 | RNVC: 2

13 Apr 1982

5340-12-371-3744
Multiple Angle Bracket

123713744
J94320185-001: RNCC: 3 | RNVC: 2

21 Mar 2007

5340-12-180-7178
Resilient Mount

121807178
NU3-02-16A41: RNCC: 3 | RNVC: 9
0002421213: RNCC: 5 | RNVC: 2

28 Sep 1979

5340-12-385-7924
Double Angle Bracket

123857924
5240981039: RNCC: 3 | RNVC: 2

8 Jul 2011

5340-12-359-2596
Spring Tension Clip

123592596
CBD45106P01: RNCC: 3 | RNVC: 2

16 Jan 2003

5340-12-326-5363
Protection Bellows

123265363
EK415: RNCC: 3 | RNVC: 2

1 Oct 1991

5340-12-326-3501
Angle Bracket

123263501
3964900440: RNCC: 3 | RNVC: 2
396 490 04 40: RNCC: 5 | RNVC: 2

4 Sep 1991

5340-12-148-4860

5340-12-022-6492

5340-12-389-2291
Angle Bracket

123892291
601251-201225.01: RNCC: 2 | RNVC: 2
601251-201225.01: RNCC: 3 | RNVC: 2

11 Jun 2012

5340-12-184-2263
Metal Runner

121842263
25729-100.00: RNCC: 3 | RNVC: 2
80996360005: RNCC: 5 | RNVC: 2
25729-100-00: RNCC: 5 | RNVC: 2
25729-100-00: RNCC: 5 | RNVC: 9
25729-100.00: RNCC: 5 | RNVC: 9

8 Jul 1980

5340-12-356-5561
Helical Compression Spring Seat

123565561
J94330213-001: RNCC: 3 | RNVC: 2

12 Mar 2002

5340-12-300-2625
Mending Plate

123002625
5801411-4125.021: RNCC: 3 | RNVC: 2
5801411-4125-021: RNCC: 5 | RNVC: 2

19 Jul 1984

5340-12-301-2663
Angle Bracket

123012663
1423-200.87(4): RNCC: 3 | RNVC: 2

2 Oct 1984

5340-12-168-1530
Retaining Strap

121681530
23176-150000-21-0: RNCC: 2 | RNVC: 2
23176-150000-21-0: RNCC: 5 | RNVC: 2
23176-150000.21.0: RNCC: 5 | RNVC: 9

23 Feb 1977

5340-12-702-5288
Angle Bracket

127025288
VG95211-ML-127025288: RNCC: 2 | RNVC: 2
5.51.7020.0160.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-334-7877
Helical Compression Spring Seat

123347877
77TT-7A138-BA: RNCC: 3 | RNVC: 2
6160014: RNCC: 5 | RNVC: 2
77TT7A138BA: RNCC: 5 | RNVC: 2
6160014: RNCC: 5 | RNVC: 2
77TT-7A138-BA: RNCC: 5 | RNVC: 2

21 Jun 1994

5340-12-170-2472
Retaining Strap

121702472
06671500107: RNCC: 3 | RNVC: 2
06.67150-0107: RNCC: 5 | RNVC: 2
18MAN217: RNCC: 5 | RNVC: 2

5 Jul 1977

Load More Results