What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 115 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 115 of 178

5340-12-025-3195

5340-12-316-8304
Webbing Strap

123168304
2300279-7213.00: RNCC: 2 | RNVC: 2
2300279-7213.00: RNCC: 3 | RNVC: 2
2300279-7213.00: RNCC: 5 | RNVC: 9

16 Feb 1989

5340-12-367-8723
Caster Wheel

123678723
D1.2492-02-00-00.00-06: RNCC: 2 | RNVC: 2
D1.2492-02-00-00.00-06: RNCC: 3 | RNVC: 2

26 Oct 2005

5340-12-011-5347

5340-12-346-8962
Electronic Equipment Hardware Kit

123468962
6131 1244 201: RNCC: 3 | RNVC: 2

23 Sep 1998

5340-12-377-3857
Mounting Bracket

123773857
8605001.3.541.04: RNCC: 3 | RNVC: 2
8605001354104: RNCC: 5 | RNVC: 2

14 Jan 2009

5340-12-358-8260
Access Hole Frame

123588260
6418680063: RNCC: 3 | RNVC: 2

19 Nov 2002

5340-12-190-4109
Pad Eye

121904109
02516648: RNCC: 3 | RNVC: 2
2516648ED5003-09: RNCC: 5 | RNVC: 2
2516648: RNCC: 5 | RNVC: 2

25 Nov 1981

5340-12-300-7733
Bridge Clamp

123007733
537177-0221.000: RNCC: 3 | RNVC: 2
537177-0221.000: RNCC: 5 | RNVC: 9
53 71 77-0221: RNCC: 5 | RNVC: 9
537177-0221: RNCC: 5 | RNVC: 9
53 71 77-0221: RNCC: 5 | RNVC: 9

29 Aug 1984

5340-12-123-2194
Halter

121232194
5166-29-20-06: RNCC: 3 | RNVC: 2
5166-29-20.06: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-315-8387
Electrical-Mechanical Equipment Post

123158387
111-00-8832-0573/01-00-031: RNCC: 2 | RNVC: 2
1000232-01-02-00-00-023: RNCC: 3 | RNVC: 2
111-00-8832-0573/01-00-031: RNCC: 5 | RNVC: 9

30 Nov 1988

5340-12-300-9447
Angle Bracket

123009447
A-296811-401: RNCC: 3 | RNVC: 2
A296811-401: RNCC: 5 | RNVC: 2

13 Sep 1984

5340-12-348-9578
Mounting Bracket

123489578
245/7346-41-00-05: RNCC: 3 | RNVC: 2

7 Sep 1999

5340-12-328-5917
Angle Bracket

123285917
160-314038.108: RNCC: 3 | RNVC: 2
160-314038-108: RNCC: 5 | RNVC: 2
160-314038.108: RNCC: 5 | RNVC: 9

4 Jun 1992

5340-12-382-0386
Multiple Angle Bracket

123820386
9999068-251820.001.0: RNCC: 3 | RNVC: 2

30 Apr 2010

5340-12-145-0484
Retaining Strap

121450484
1212 6773: RNCC: 3 | RNVC: 2
12126773: RNCC: 5 | RNVC: 2
31.2263-14.4: RNCC: 5 | RNVC: 2
31-2263-14-4: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-320-4064
Extension Drawer Slide

123204064
84337: RNCC: 3 | RNVC: 2
HY-P-774-4-13: RNCC: 5 | RNVC: 2

11 Jan 1990

5340-12-701-6115
Double Angle Bracket

127016115
VG95211-ML-127016115: RNCC: 2 | RNVC: 2
5.12.7010.1440.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-323-0203
Resilient Mount

123230203
T442.01-4.1461: RNCC: 3 | RNVC: 2

17 Oct 1990

5340-12-365-3514
Mounting Bracket

123653514
2500267-198760.001.0: RNCC: 3 | RNVC: 2

22 Dec 2004

5340-12-369-3159
Angle Bracket Set

123693159
2300515-186210.007.0: RNCC: 3 | RNVC: 2

20 Jun 2006

5340-12-702-0029
Loop Clamp

127020029
VG95211-ML-127020029: RNCC: 2 | RNVC: 2
1667S50-15,5: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-5774
Retaining Strap

127015774
VG95211-ML-127015774: RNCC: 2 | RNVC: 2
5.12.6405.0080.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-351-0366
Mounting Bracket

123510366
5.042-373: RNCC: 3 | RNVC: 2

19 Jun 2000

5340-12-312-6695
Mending Plate

123126695
78-116.0.01: RNCC: 3 | RNVC: 2

26 Jan 1988

5340-12-386-2142
Butt Hinge

123862142
2800-190239.002.0: RNCC: 3 | RNVC: 2

17 Aug 2011

5340-12-371-4576
Angle Bracket

123714576
23302-121400.54: RNCC: 2 | RNVC: 2
23302-121400.54: RNCC: 3 | RNVC: 2
4-1641-419: RNCC: 5 | RNVC: 2
8411635: RNCC: 5 | RNVC: 2

2 Apr 2007

5340-12-364-6581
Mounting Bracket

123646581
2339-090041A00C: RNCC: 3 | RNVC: 2

19 Oct 2004

5340-12-363-1232
Expansion Plug

123631232
0117 9708: RNCC: 3 | RNVC: 2
H2860-A36-ST-FE/ZNPHR: RNCC: 5 | RNVC: 2

5 May 2004

5340-12-363-3376
Loop Clamp

123633376
81974600001: RNCC: 3 | RNVC: 2
81.97460-0001: RNCC: 5 | RNVC: 2

27 May 2004

5340-12-196-1168
Lock-Release Lever

121961168
8100146-3000-05: RNCC: 2 | RNVC: 2

1 Jun 1983

5340-12-188-2463
Double Angle Bracket

121882463
4312 712 20710: RNCC: 3 | RNVC: 2
431271220710: RNCC: 5 | RNVC: 2
5801685-520000-04: RNCC: 5 | RNVC: 9
5801685-520000.04: RNCC: 5 | RNVC: 9

22 Jun 1981

5340-12-172-0627
Mending Plate

121720627
1000078-130000.21: RNCC: 2 | RNVC: 2
1000078-130000-21: RNCC: 5 | RNVC: 2
1000078-130000-21: RNCC: 5 | RNVC: 9
1000078-130000-21: RNCC: 5 | RNVC: 9

19 Dec 1977

5340-12-168-5671
Nut And Bolt Locking Plate

121685671
1000025-230000-11: RNCC: 3 | RNVC: 2
1000025-230000.11: RNCC: 3 | RNVC: 2
1000025-230000.11: RNCC: 5 | RNVC: 9
1000025-230000-11: RNCC: 5 | RNVC: 9

23 Mar 1977

5340-12-340-5088
Handle Grip

123405088
0700-0000.06: RNCC: 3 | RNVC: 2

24 Apr 1996

5340-12-340-1301
Spring Tension Clip

123401301
726 22920 AAAA: RNCC: 3 | RNVC: 2
726 22920 AAAA-HDQA: RNCC: 5 | RNVC: 2

2 Mar 1996

5340-12-138-4457
Spring Tension Clip

121384457
AWENTW2267A138: RNCC: 3 | RNVC: 2
AWENTW2267A138: RNCC: 5 | RNVC: 2
AWENTW2267A138: RNCC: 5 | RNVC: 2
AWENTW2267A138: RNCC: 5 | RNVC: 2
C99U2267C138: RNCC: 5 | RNVC: 9
C99-U2267-C138: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-316-1948
Mending Plate

123161948
4900153-14230.00.01: RNCC: 2 | RNVC: 2
4900153-14230.00.01: RNCC: 3 | RNVC: 2
4900153-14230-01: RNCC: 5 | RNVC: 2

30 Dec 1988

5340-12-332-0288
Angle Bracket

123320288
160-75332-33: RNCC: 3 | RNVC: 2
160-75332-33: RNCC: 5 | RNVC: 9

16 Jul 1993

5340-12-303-5491
Electrical-Mechanical Equipment Post

123035491
VG95148B8XM5X25-ST: RNCC: 2 | RNVC: 2
0801-2200: RNCC: 3 | RNVC: 2
VG95148B8XM5X25-ST: RNCC: 3 | RNVC: 2
18H334: RNCC: 3 | RNVC: 2

3 Apr 1985

5340-12-322-8184
Dust And Moisture Seal Boot

123228184
531910-0008.000: RNCC: 2 | RNVC: 2
531910-0008.000: RNCC: 3 | RNVC: 2
531910-0008.000: RNCC: 5 | RNVC: 9

25 Sep 1990

5340-12-361-9799
Mechanical Stop

123619799
2125-129750A00C: RNCC: 2 | RNVC: 2
2125-129750A00C: RNCC: 3 | RNVC: 2

11 Dec 2003

5340-12-313-3417
Double Angle Bracket

123133417
588.90-211810-005: RNCC: 3 | RNVC: 2

23 Mar 1988

5340-12-302-8429
Rigid Caster

123028429
6600117-460000.00: RNCC: 2 | RNVC: 2
6600117-460000.00: RNCC: 5 | RNVC: 9

4 Feb 1985

5340-12-198-0948
Angle Bracket

121980948
5801411-3311.001: RNCC: 3 | RNVC: 2
5801411-3311.001: RNCC: 5 | RNVC: 9

20 Dec 1983

5340-12-329-6179
Friction Catch Stud Receptacle

123296179
DIN6310-80: RNCC: 2 | RNVC: 2
80DIN6310: RNCC: 5 | RNVC: 2
07560-03: RNCC: 5 | RNVC: 2
DIN6310-80: RNCC: 5 | RNVC: 2
80DIN6310: RNCC: 5 | RNVC: 2
NLM756-03: RNCC: 5 | RNVC: 9
NLM7560-03: RNCC: 5 | RNVC: 9

9 Sep 1992

5340-12-337-1175
Metallic Bumper

123371175
537173-1101.000: RNCC: 3 | RNVC: 2
537173-1101.000: RNCC: 5 | RNVC: 9

19 Jan 1995

5340-12-375-0023
Multiple Angle Bracket

123750023
453 6287-001: RNCC: 3 | RNVC: 2
453 6287-001: RNCC: 5 | RNVC: 2

11 Apr 2008

5340-12-181-0936
Turnbuckle Body

121810936
DIN1480-SPM12-ST-A3P: RNCC: 2 | RNVC: 2
SPMU-DIN1480-M12-A3P: RNCC: 3 | RNVC: 2
3300012V: RNCC: 5 | RNVC: 2
SPM12DIN1480TZN600: RNCC: 5 | RNVC: 2
SPM12DIN1480VERZINKT: RNCC: 5 | RNVC: 2

24 Oct 1979

5340-12-359-3477
Mending Plate

123593477
009-221.500-014: RNCC: 2 | RNVC: 2
009-221.500-014: RNCC: 3 | RNVC: 2

27 Jan 2003

5340-12-363-9081
Angle Bracket

123639081
J92228305-401: RNCC: 3 | RNVC: 2

4 Aug 2004

5340-12-195-4130
Angle Bracket

121954130
2028R-13000.09: RNCC: 3 | RNVC: 2
2028R13000-09: RNCC: 5 | RNVC: 2

21 Feb 1983

5340-12-302-8310
Metal Runner

123028310
4900123-1300.02: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-12-702-8554
Mounting Plate

127028554
53-04045003144: RNCC: 2 | RNVC: 2

4 Jan 1996

5340-12-320-4459
Metal Runner

123204459
335946-0500.000: RNCC: 2 | RNVC: 2
335946-0500.000: RNCC: 3 | RNVC: 2
335946-0500.000: RNCC: 5 | RNVC: 9

16 Jan 1990

5340-12-344-7659
Support Hook

123447659
588.00-009000-116: RNCC: 3 | RNVC: 2

5 Dec 1997

5340-12-195-7253
Electrical-Mechanical Equipment Post

121957253
VG95148B5,5XM3X40-ST: RNCC: 2 | RNVC: 2
VG95148B5,5XM3X40-ST: RNCC: 3 | RNVC: 2
18H290: RNCC: 3 | RNVC: 2
18H290: RNCC: 5 | RNVC: 9

5 Apr 1983

5340-12-356-1739
Angle Bracket

123561739
ED41-1310-00030-103: RNCC: 2 | RNVC: 2
ED41-1310-00030-103: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-12-320-2407
Double Angle Bracket

123202407
0242 1914: RNCC: 3 | RNVC: 2
02421914ED0148-01: RNCC: 5 | RNVC: 2

21 Dec 1989

5340-12-360-8671
Dust And Moisture Seal Protective Cover

123608671
83-8256: RNCC: 3 | RNVC: 2

17 Jul 2003

5340-12-139-3344
Platte

121393344
TFS70-06037: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-350-3637
Strap Hinge Leaf

123503637
105-62582.09: RNCC: 3 | RNVC: 2

21 Mar 2000

5340-12-350-4891
Angle Bracket

123504891
10063-320110: RNCC: 3 | RNVC: 2
10063-320110: RNCC: 5 | RNVC: 9

5 Apr 2000

5340-12-380-6936
Bumper

123806936
1745: RNCC: 3 | RNVC: 2

19 Nov 2009

5340-12-315-2532
Dust And Moisture Seal Protective Plug

123152532
3819972386: RNCC: 3 | RNVC: 2
381 997 23 86: RNCC: 5 | RNVC: 2

6 Oct 1988

5340-12-377-8017
Shelf Bracket

123778017
290 01705: RNCC: 3 | RNVC: 2
287 41906: RNCC: 5 | RNVC: 9

12 Feb 2009

5340-12-183-8116
Catch Strike

121838116
211813259B: RNCC: 3 | RNVC: 2

23 May 1980

5340-12-352-2190
Shimmy Damper

123522190
5307017: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-12-302-0957
Loop Clamp

123020957
068130421: RNCC: 3 | RNVC: 2

1 Dec 1984

5340-12-043-3083

5340-12-313-7389
Mending Plate

123137389
1461098306: RNCC: 3 | RNVC: 2

29 Apr 1988

5340-12-318-8926
Extension Drawer Slide

123188926
C249-A28-B12: RNCC: 3 | RNVC: 2

23 Aug 1989

5340-12-352-9885
Loop Clamp

123529885
H00089: RNCC: 3 | RNVC: 2

16 Jan 2001

5340-12-320-0913
Mounting Bracket

123200913
06501029: RNCC: 3 | RNVC: 9

6 Dec 1989

5340-12-175-8018
Dust And Moisture Seal Protective Plug

121758018
01TC31999: RNCC: 3 | RNVC: 2

18 Oct 1978

5340-12-376-7382
Mounting Bracket

123767382
8103202000: RNCC: 3 | RNVC: 2

3 Nov 2008

5340-12-306-0662
Mending Plate

123060662
5801984-982000.002.0: RNCC: 2 | RNVC: 2
5801984-982000.002.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-359-7359
Mounting Plate

123597359
S282M2005205: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-120-3399

5340-12-320-7036
Mounting Bracket

123207036
CF 339 383 A: RNCC: 2 | RNVC: 2
CF 339 383 A: RNCC: 3 | RNVC: 2
CF 339 383 A: RNCC: 3 | RNVC: 2

8 Feb 1990

5340-12-389-4351
Access Cover

123894351
1.313-201020.00: RNCC: 2 | RNVC: 2
1.313-201020.00: RNCC: 5 | RNVC: 2

5 Jul 2012

5340-12-196-2901
Double Angle Bracket

121962901
1200096-1111A0000: RNCC: 2 | RNVC: 2
1200096-1111A0000: RNCC: 3 | RNVC: 2

22 Jun 1983

5340-12-359-9465
Loop Clamp

123599465
J28120153-403: RNCC: 3 | RNVC: 2

24 Mar 2003

5340-12-327-5707
Bridge Clamp

123275707
2106-110000.04B: RNCC: 2 | RNVC: 2
2106-110000.04B: RNCC: 3 | RNVC: 2
2106-110000.04B: RNCC: 5 | RNVC: 2

4 Feb 1992

5340-12-190-7181
Angle Bracket

121907181
NO PRIMARY REF 12-190-7181: RNCC: 3 | RNVC: 2
7501132871: RNCC: 5 | RNVC: 9
7501 132871: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-350-1316
Runner

123501316
8X902R005-0000.03: RNCC: 3 | RNVC: 2

18 Feb 2000

5340-12-313-8006
Electrical-Mechanical Equipment Post

123138006
5801648-30520.02: RNCC: 2 | RNVC: 2
5801648-30520.02: RNCC: 3 | RNVC: 2

6 May 1988

5340-12-349-0714
Angle Bracket

123490714
2300387-061940.000: RNCC: 2 | RNVC: 2
9907280: RNCC: 3 | RNVC: 2
2300387-061940.000: RNCC: 5 | RNVC: 9
9907280: RNCC: 5 | RNVC: 9

21 Sep 1999

5340-12-171-1888
Retaining Strap

121711888
06671500204: RNCC: 3 | RNVC: 2
003136-0000: RNCC: 5 | RNVC: 2
06.67150.0104: RNCC: 5 | RNVC: 2
06671500104: RNCC: 5 | RNVC: 2
12MAN217: RNCC: 5 | RNVC: 9

16 Sep 1977

5340-12-194-9563
Nonmetallic Solid Wheel

121949563
2500006-2500.01: RNCC: 2 | RNVC: 2
TK6092-2500.01: RNCC: 3 | RNVC: 2
6092-2500.01: RNCC: 5 | RNVC: 2
TK6092-2500-01: RNCC: 5 | RNVC: 2
2500006-2500-01: RNCC: 5 | RNVC: 9

22 Dec 1982

5340-12-340-1553
Mounting Plate

123401553
81423780007: RNCC: 3 | RNVC: 2
219512-4000: RNCC: 5 | RNVC: 2
2195124000: RNCC: 5 | RNVC: 2

7 Mar 1996

5340-12-358-7821
Multiple Angle Bracket

123587821
J92222558-403: RNCC: 3 | RNVC: 2

14 Nov 2002

5340-12-332-6160
Mending Plate

123326160
P-886710-017: RNCC: 3 | RNVC: 2
P886710-017: RNCC: 5 | RNVC: 2

30 Aug 1993

5340-12-379-4142
Access Cover

123794142
SK979-977273.001.0: RNCC: 3 | RNVC: 2

21 Jul 2009

5340-12-701-6040
Mounting Bracket

127016040
VG95211-ML-127016040: RNCC: 2 | RNVC: 2
5.12.6602.0040.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-157-7477
Helical Compression Spring Seat

121577477
1216 1088: RNCC: 3 | RNVC: 2
6-232-0-342-002-4: RNCC: 5 | RNVC: 9
6.232.0.342.002.4: RNCC: 5 | RNVC: 9
12161088: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-318-7969
Elastic Strap

123187969
704-128420-000-0: RNCC: 3 | RNVC: 2

17 Aug 1989

5340-12-308-2912
Double Angle Bracket

123082912
P-875198-003: RNCC: 3 | RNVC: 2
P875198-003: RNCC: 5 | RNVC: 2

24 Sep 1986

5340-12-196-9551
Mending Plate

121969551
A-295073-001: RNCC: 3 | RNVC: 2
A295073-001: RNCC: 5 | RNVC: 2

5 Sep 1983

5340-12-701-8758
Rod End Connector

127018758
VG95211-ML-127018758: RNCC: 2 | RNVC: 2
7.76.7600.1254.02: RNCC: 3 | RNVC: 2
76-7600-1254-2: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-322-2753
Loop Clamp

123222753
DIN3015-LA-L-2R-12,7-PP-W1: RNCC: 2 | RNVC: 2
DIN3015/LAL2R-12,7-PP-W1: RNCC: 2 | RNVC: 2
HRL2AV12,7PP STMBL: RNCC: 3 | RNVC: 2
RAPR6-2 1/2: RNCC: 3 | RNVC: 2
SPV2127-PP-DP-AS: RNCC: 3 | RNVC: 2
RAPR6-2 1/2: RNCC: 5 | RNVC: 2

7 Aug 1990

5340-12-701-6329
Mounting Plate

127016329
VG95211-ML-127016329: RNCC: 2 | RNVC: 2
5.12.7060.1150.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-7560
Access Cover

127027560
50-06101610045: RNCC: 2 | RNVC: 2

13 Dec 1995

5340-12-197-6992
Mending Plate

121976992
P-296921-404: RNCC: 3 | RNVC: 2
P296921-404: RNCC: 5 | RNVC: 2

15 Nov 1983

5340-12-362-6937
Mounting Bracket

123626937
2125-121000A80B: RNCC: 3 | RNVC: 2

19 Mar 2004

5340-12-336-0436
Resilient Mount

123360436
H63-146-90-102-4-FF: RNCC: 3 | RNVC: 2
H63-146-90-102-4FF: RNCC: 5 | RNVC: 2

14 Oct 1994

5340-12-181-9949
Loop Clamp

121819949
DIN3016D2-12-12-12-12-12X20-W1-2: RNCC: 2 | RNVC: 2
DIN3016D2-12-12-12-12-12X20-W1-2: RNCC: 3 | RNVC: 2
RSGU1.5X12/20: RNCC: 3 | RNVC: 2
RSGU1.5X12/20-W1: RNCC: 3 | RNVC: 2
RSGU1100-5X12-20: RNCC: 5 | RNVC: 2
RSGU1100.5X12/20: RNCC: 5 | RNVC: 2
DIN3016-D2-12-12-12-12-12X20W1-2: RNCC: 5 | RNVC: 2
4219520012: RNCC: 5 | RNVC: 2

4 Jan 1980

5340-12-701-3615
Rod End Connector

127013615
VG95211-ML-127013615: RNCC: 2 | RNVC: 2
5.12.5111.6310.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-382-3020
Mounting Plate

123823020
1117592: RNCC: 3 | RNVC: 2

2 Jun 2010

5340-12-162-7793
Dust And Moisture Seal Protective Cap

121627793
100332-18700.04: RNCC: 2 | RNVC: 2
100332-18700-04: RNCC: 5 | RNVC: 2
100332-18700.04: RNCC: 5 | RNVC: 2
100332-18700-04: RNCC: 5 | RNVC: 9
5043-2-3-0-40-4-00-5: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-356-0688
Manual Control Lever

123560688
P-876414-005: RNCC: 3 | RNVC: 2
P876414-005: RNCC: 5 | RNVC: 2

18 Jan 2002

5340-12-313-2112
Lock-Release Lever

123132112
7.36.7-24.41.07-01: RNCC: 3 | RNVC: 2

11 Mar 1988

5340-12-305-2567
Angle Bracket

123052567
4900059-211301.000.0/6: RNCC: 3 | RNVC: 2
4900059-211301.006.0: RNCC: 5 | RNVC: 2

15 Oct 1985

5340-12-321-9430
Metal Runner

123219430
702-241500-955-0: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-12-702-5292
Mounting Bracket

127025292
VG95211-ML-127025292: RNCC: 2 | RNVC: 2
5.51.7020.0310.05: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-343-7880
Spacing Threaded Standoff

123437880
3015R-001100.005.0: RNCC: 2 | RNVC: 2
3015R-001100.005.0: RNCC: 3 | RNVC: 2

28 Jul 1997

5340-12-186-6063
Angle Bracket

121866063
519044-0301.000: RNCC: 3 | RNVC: 2
519044-0301: RNCC: 5 | RNVC: 2
519044-0301-000: RNCC: 5 | RNVC: 2

21 Jan 1981

5340-12-131-5612
Turnbuckle

121315612
DIN82004-B1-VERZINKT: RNCC: 2 | RNVC: 2
DIN82004-B1-ZN: RNCC: 3 | RNVC: 2
B1DIN82004VERZINKT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-701-9548
Pawl Fastener

127019548
VG95211-ML-127019548: RNCC: 2 | RNVC: 2
5.12.6501.1851.98: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-12-701-1915
Mounting Bracket

127011915
VG95211-ML-127011915: RNCC: 2 | RNVC: 2
5.12.0430.4400.92: RNCC: 3 | RNVC: 2
0501403314099: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-312-7738
Webbing Strap

123127738
301131-031200.002.0: RNCC: 2 | RNVC: 2
301131-031200.002.0: RNCC: 3 | RNVC: 9
301131-031200.002.0: RNCC: 5 | RNVC: 2

4 Feb 1988

5340-12-701-4575
Mounting Bracket

127014575
VG95211-ML-127014575: RNCC: 2 | RNVC: 2
5.12.5314.1160.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-141-3251
Retaining Strap

121413251
2509FKUE601-020: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-190-7426
Mending Plate

121907426
NO PRIMARY REF 12-190-7426: RNCC: 3 | RNVC: 2
7201137166: RNCC: 5 | RNVC: 9
7201 137166: RNCC: 5 | RNVC: 9

10 Dec 1981

5340-12-140-9086
Nonmetallic Bumper

121409086
2510-0007: RNCC: 3 | RNVC: 2
31501: RNCC: 5 | RNVC: 2
33120: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-380-9074
Door Handle

123809074
8120-0032: RNCC: 3 | RNVC: 2

11 Dec 2009

5340-12-303-8500
Retaining Strap

123038500
NO PRIMARY REF 12-303-8500: RNCC: 3 | RNVC: 2
6074 156808: RNCC: 5 | RNVC: 9

8 May 1985

5340-12-186-3617
Bow Handle

121863617
ZB4A: RNCC: 3 | RNVC: 2
5LV3731-001-05: RNCC: 5 | RNVC: 2
5L3731-001-05: RNCC: 5 | RNVC: 2

18 Dec 1980

5340-12-362-2448
Dust And Moisture Seal Protective Cap

123622448
97199787-0182755: RNCC: 3 | RNVC: 2
0182755: RNCC: 5 | RNVC: 9
97199787: RNCC: 5 | RNVC: 9

28 Jan 2004

5340-12-356-3274
Access Cover

123563274
2125-115100.47B: RNCC: 2 | RNVC: 2
2125-115100.47B: RNCC: 3 | RNVC: 2

14 Feb 2002

5340-12-335-0401
Retaining Strap

123350401
289G-00-T4A: RNCC: 3 | RNVC: 2

14 Jul 1994

5340-12-302-6478
Compression Cup

123026478
TFH114,2-149,2-12,5: RNCC: 3 | RNVC: 2
TFH114,2X149,2X12,5: RNCC: 5 | RNVC: 2
TFH114,2-149,2-12,5-4TF/529: RNCC: 5 | RNVC: 2

18 Jan 1985

5340-12-192-5002
Access Cover

121925002
AFG006600: RNCC: 3 | RNVC: 2
AFG-18-01-00-00-17: RNCC: 5 | RNVC: 2

29 Apr 1982

5340-12-352-0594
Retaining Strap

123520594
DIN1593-13ZN: RNCC: 2 | RNVC: 2

11 Oct 2000

5340-12-348-0346
Turnbuckle Body

123480346
PAN4512A01-0111: RNCC: 3 | RNVC: 2

30 Mar 1999

5340-12-393-7718
Dust And Moisture Seal Protective Cover

123937718
F1.1289-00-12-01.00-02: RNCC: 3 | RNVC: 2

9 Oct 2013

5340-12-180-4959
Rod End Connector

121804959
5900063-210000.05: RNCC: 3 | RNVC: 2
5900063-210000-05: RNCC: 5 | RNVC: 2
5900063-210000.05: RNCC: 5 | RNVC: 9

14 Sep 1979

5340-12-132-9506
Clamping Catch

121329506
DIN3134-D70-K15X45BK: RNCC: 2 | RNVC: 2
AL70DIN3134: RNCC: 5 | RNVC: 2
AL70DIN3134R0H: RNCC: 5 | RNVC: 2
DIN3134-D70-K15X46-BK: RNCC: 5 | RNVC: 2
06431400102: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-315-6632
Angle Bracket

123156632
512214-0403.000: RNCC: 3 | RNVC: 2
512214-0403: RNCC: 5 | RNVC: 2

18 Nov 1988

5340-12-176-9628
Spring Tension Clip

121769628
5800822-1204-002: RNCC: 3 | RNVC: 2
5800822-1204.002: RNCC: 5 | RNVC: 2

3 Jan 1979

5340-12-199-0293
Metal Runner

121990293
5801549-21203.004: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-12-306-3620
Angle Bracket

123063620
4900059-323110.006.0: RNCC: 3 | RNVC: 2
4900059-323110.006.0: RNCC: 5 | RNVC: 9

24 Feb 1986

5340-12-168-5333
Angle Bracket

121685333
C20136A114C92: RNCC: 3 | RNVC: 2
C20136-A114-C92: RNCC: 5 | RNVC: 2
TDRUCK4T2092: RNCC: 5 | RNVC: 2
TFS72-55092: RNCC: 5 | RNVC: 2

18 Mar 1977

5340-12-316-6704
Extension Drawer Slide

123166704
GC301-1438A: RNCC: 3 | RNVC: 2
GC301-1438: RNCC: 5 | RNVC: 2

1 Feb 1989

5340-12-301-2400
Mending Plate

123012400
4178954: RNCC: 3 | RNVC: 2

29 Sep 1984

5340-12-309-1902
Retaining Band

123091902
1547 GUMMITEIL FUER HAUBENHALTER: RNCC: 3 | RNVC: 2
GUMMITEIL FUER HAUBENHALTER: RNCC: 5 | RNVC: 2

19 Dec 1986

5340-12-337-0054
Handle Grip

123370054
160-62240-39: RNCC: 3 | RNVC: 2
15160-62240.39: RNCC: 5 | RNVC: 2
160-62240.39: RNCC: 5 | RNVC: 2
160-62240-39: RNCC: 5 | RNVC: 9

10 Jan 1995

5340-12-330-9254
Mounting Bracket

123309254
480-7347-10-36-00: RNCC: 3 | RNVC: 2
480/7347-10-36-00: RNCC: 5 | RNVC: 2

26 Feb 1993

5340-12-328-9891
Loop Clamp

123289891
DIN3015-LD-1R-10-PA6-W1: RNCC: 2 | RNVC: 2
RANR12-110: RNCC: 3 | RNVC: 2
SM110APA-DP-AS: RNCC: 3 | RNVC: 2
DIN3015-LD-1R-10-PA-W1: RNCC: 5 | RNVC: 2
SM110A-PA-DP-AS: RNCC: 5 | RNVC: 2
RANR12-110: RNCC: 5 | RNVC: 2
VG95932B1-10-PA: RNCC: 5 | RNVC: 9

7 Jul 1992

5340-12-382-8328
Mounting Plate

123828328
10113-012140.003.0: RNCC: 2 | RNVC: 2
10113-012140.003.0: RNCC: 3 | RNVC: 2

13 Aug 2010

5340-12-193-1279
Rod End Clevis

121931279
VG85211-11: RNCC: 2 | RNVC: 2
VG85211-11: RNCC: 3 | RNVC: 2
VG85211-1-1: RNCC: 5 | RNVC: 2

23 Jun 1982

5340-12-308-4664
Webbing Strap

123084664
79026/053-0150: RNCC: 3 | RNVC: 2
79026-053-0150: RNCC: 5 | RNVC: 2
79026/053-150: RNCC: 5 | RNVC: 2

14 Oct 1986

5340-12-197-5837
Double Angle Bracket

121975837
A-231028-001: RNCC: 3 | RNVC: 2
A231028-001: RNCC: 5 | RNVC: 2

7 Nov 1983

5340-12-325-1965
Mounting Bracket

123251965
HAX 514 805 019: RNCC: 3 | RNVC: 2
HAX514-805-019: RNCC: 5 | RNVC: 2

14 May 1991

5340-12-305-2459
Dust And Moisture Seal Protective Cap

123052459
5.394-094.0: RNCC: 3 | RNVC: 2
5-394-094: RNCC: 5 | RNVC: 9
5.394-094: RNCC: 5 | RNVC: 9

14 Oct 1985

5340-12-383-8836
Webbing Strap

123838836
601241-202620.03: RNCC: 2 | RNVC: 2
601241-202620.03: RNCC: 3 | RNVC: 2

16 Dec 2010

5340-12-317-8187
Resilient Mount

123178187
H95-216-110-135-8-F: RNCC: 3 | RNVC: 2
6090000021: RNCC: 5 | RNVC: 2
1.795246: RNCC: 5 | RNVC: 2

17 May 1989

5340-12-701-6342
Mounting Plate

127016342
VG95211-ML-127016342: RNCC: 2 | RNVC: 2
5.12.7060.1400.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-125-1154
Nut And Bolt Locking Plate

121251154
8403755: RNCC: 3 | RNVC: 2
0049-095: RNCC: 5 | RNVC: 2
0049095: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-371-3219
Catch Strike

123713219
V18L13-1-1AE: RNCC: 3 | RNVC: 2

14 Mar 2007

5340-12-301-7021
Resilient Mount

123017021
LC7.20.CR60: RNCC: 3 | RNVC: 9
LC7.20/CR60: RNCC: 5 | RNVC: 2
5323: RNCC: 5 | RNVC: 2
116 034: RNCC: 5 | RNVC: 2
116 034: RNCC: 5 | RNVC: 2
116034: RNCC: 5 | RNVC: 2
116 034: RNCC: 5 | RNVC: 9
116034: RNCC: 5 | RNVC: 9
5323: RNCC: 5 | RNVC: 9

3 Nov 1984

5340-12-164-7666
Catch Strike

121647666
70410000921RECHTS: RNCC: 3 | RNVC: 2
B01-93.90-011: RNCC: 3 | RNVC: 2
2608-306: RNCC: 5 | RNVC: 2
2608306: RNCC: 5 | RNVC: 2
6000508: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-164-7658
Door Button

121647658
23302-181122.00: RNCC: 2 | RNVC: 2
2608-385: RNCC: 3 | RNVC: 2
2608385: RNCC: 5 | RNVC: 2
23302-181122: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-312-9967
Angle Bracket

123129967
403163-00: RNCC: 3 | RNVC: 2
9XT403163-00: RNCC: 5 | RNVC: 2

24 Feb 1988

5340-12-182-1552
Angle Bracket

121821552
5801506-5522.000: RNCC: 2 | RNVC: 2
3824028007: RNCC: 5 | RNVC: 2
5801506-5522-000: RNCC: 5 | RNVC: 2
38240 28007: RNCC: 5 | RNVC: 9
5801506-5522-000: RNCC: 5 | RNVC: 9
38240-28007: RNCC: 5 | RNVC: 9

16 Jan 1980

5340-12-328-9767
Resilient Mount

123289767
DIN95363-B15X15-M4X8-NR55ST: RNCC: 2 | RNVC: 2
510011-M4X8.NR55.ST: RNCC: 5 | RNVC: 2
4900 3030: RNCC: 5 | RNVC: 2
VG95363-B15X15-M4X8-NR55ST: RNCC: 5 | RNVC: 9

4 Jul 1992

5340-12-168-5668
Pad Eye

121685668
1000025-230000.14: RNCC: 3 | RNVC: 2
1000025-230000-14: RNCC: 3 | RNVC: 2
1000025-230000.14: RNCC: 5 | RNVC: 9
1000025-230000-14: RNCC: 5 | RNVC: 9

23 Mar 1977

5340-12-183-5079
Spring Tension Clip

121835079
5801441-10520.007: RNCC: 2 | RNVC: 2
5801441-10520.007: RNCC: 3 | RNVC: 2
5801441-10520-007: RNCC: 5 | RNVC: 2
5801441-10520.007: RNCC: 5 | RNVC: 9
5801441-10520-007: RNCC: 5 | RNVC: 9

22 Apr 1980

5340-12-322-3510
Access Cover

123223510
5801846-122: RNCC: 2 | RNVC: 2
5801846-122: RNCC: 3 | RNVC: 2

14 Aug 1990

5340-12-167-3304
Mending Plate

121673304
1400003-11005-08: RNCC: 3 | RNVC: 2
1400003-11005.08: RNCC: 5 | RNVC: 9
1400003-11005-08: RNCC: 5 | RNVC: 9

14 Dec 1976

5340-12-190-3087
Metal Runner

121903087
5801544-012001.002: RNCC: 3 | RNVC: 2
5801544-012001-002: RNCC: 5 | RNVC: 2
5801544-012001.002: RNCC: 5 | RNVC: 9

19 Nov 1981

5340-12-316-2238
Webbing Strap

123162238
7400001-201710.00: RNCC: 3 | RNVC: 2
7400001-201710.00: RNCC: 5 | RNVC: 9

2 Jan 1989

5340-12-310-3341
Access Cover

123103341
0651801: RNCC: 3 | RNVC: 2
5340-12-178-1521: RNCC: 6 | RNVC: 9

11 May 1987

5340-12-353-8608
Mounting Plate

123538608
J92222212-001: RNCC: 3 | RNVC: 2

16 May 2001

5340-12-353-7172
Multiple Angle Bracket

123537172
J92222229-001: RNCC: 3 | RNVC: 2

2 May 2001

5340-12-197-3921
Ball Socket Seat

121973921
DIN71805-B13-A4C: RNCC: 2 | RNVC: 2
DIN71805-B13-A4C: RNCC: 3 | RNVC: 2
B13DIN71805DBL845121: RNCC: 5 | RNVC: 2
1103472: RNCC: 5 | RNVC: 2
B13DIN71805-A4C: RNCC: 5 | RNVC: 2
071805013102: RNCC: 5 | RNVC: 2
06.36120-4203: RNCC: 5 | RNVC: 2
06361204203: RNCC: 5 | RNVC: 2

18 Oct 1983

5340-12-377-8770
Cushioning Pad

123778770
4100036-150261.112: RNCC: 2 | RNVC: 2
4100036-150261.112: RNCC: 3 | RNVC: 2

18 Feb 2009

5340-12-302-6739
Mending Plate

123026739
20-5220-155: RNCC: 3 | RNVC: 2

22 Jan 1985

5340-12-313-3281
Mending Plate

123133281
1900037-00-06: RNCC: 2 | RNVC: 2
352759: RNCC: 3 | RNVC: 2

22 Mar 1988

5340-12-152-3015
Corner Brace

121523015
5800400-0310-011: RNCC: 3 | RNVC: 2
6P358-310-11: RNCC: 5 | RNVC: 2
5800400-0310-011: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-152-9633
Friction Catch Stud Receptacle

121529633
6030057: RNCC: 3 | RNVC: 2
N3566: RNCC: 5 | RNVC: 2
2638-853: RNCC: 5 | RNVC: 2
151.464: RNCC: 5 | RNVC: 2
0069015: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-163-8277
Retaining Strap

121638277
5835-17.003: RNCC: 3 | RNVC: 2
H38-3502-50: RNCC: 5 | RNVC: 2
5835-17-003: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-306-8927
Loop Clamp

123068927
B32/32BX94TAN15836: RNCC: 3 | RNVC: 2
B32/32BX94TAN15836: RNCC: 3 | RNVC: 2
B32X32B94TAN15836: RNCC: 5 | RNVC: 2

15 Apr 1986

5340-12-385-4689
Pipe Hanger

123854689
5849951368: RNCC: 3 | RNVC: 2

7 Jun 2011

5340-12-173-0891
Spring Tension Clip

121730891
4252510085: RNCC: 3 | RNVC: 2

20 Mar 1978

5340-12-094-0848

5340-12-324-4951
Handle Grip

123244951
4.0224-02: RNCC: 3 | RNVC: 2

22 Feb 1991

5340-12-310-0767
Angle Bracket

123100767
P-243859-006: RNCC: 3 | RNVC: 2
P243859-006: RNCC: 5 | RNVC: 2

3 Apr 1987

5340-12-703-3262
Mounting Bracket

127033262
VG95211-ML-127033262: RNCC: 2 | RNVC: 2
5.12.8402.0063.98: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-389-2611
Expansion Plug

123892611
DIN443-12-A-ST: RNCC: 2 | RNVC: 2

14 Jun 2012

5340-12-342-3534
Mounting Plate

123423534
564.310.023: RNCC: 3 | RNVC: 2
564-310-023: RNCC: 5 | RNVC: 2

28 Jan 1997

5340-12-350-1700
Mounting Bracket

123501700
V6550-06001-115: RNCC: 3 | RNVC: 2

23 Feb 2000

5340-12-188-7743
Catch Strike

121887743
5801479-3151: RNCC: 2 | RNVC: 2
5801479-3151: RNCC: 3 | RNVC: 2
5801479-3151: RNCC: 5 | RNVC: 9

29 Jul 1981

5340-12-159-8651
Expansion Plug

121598651
100332-10410.23: RNCC: 2 | RNVC: 2
100332-10410-23: RNCC: 5 | RNVC: 2
100332-10410.23: RNCC: 5 | RNVC: 2
100332-10410-23: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-355-9942
Access Door Hinge

123559942
8301-0005: RNCC: 3 | RNVC: 2

11 Jan 2002

5340-12-330-3176
Door Handle

123303176
06-4-002: RNCC: 3 | RNVC: 2
06-4-002: RNCC: 5 | RNVC: 2
06-4-002: RNCC: 5 | RNVC: 2
06-4-002: RNCC: 5 | RNVC: 9

2 Dec 1992

5340-12-330-3175
Door Handle

123303175
03-4-002: RNCC: 3 | RNVC: 2
03-4-002: RNCC: 5 | RNVC: 2
03-4-002: RNCC: 5 | RNVC: 2
03-4-002: RNCC: 5 | RNVC: 9

2 Dec 1992

5340-12-308-6463
Double Angle Bracket

123086463
LM-2817POS17: RNCC: 3 | RNVC: 9
LM-2835POS19: RNCC: 3 | RNVC: 9

31 Oct 1986

5340-12-321-1182
Angle Bracket

123211182
P-616815-443: RNCC: 3 | RNVC: 2
P616815-443: RNCC: 5 | RNVC: 2

29 Mar 1990

5340-12-356-4993
Dust And Moisture Seal Protective Plug

123564993
735G3/8: RNCC: 3 | RNVC: 2
909735150: RNCC: 5 | RNVC: 2
GPN735-G3/8: RNCC: 5 | RNVC: 9

6 Mar 2002

5340-12-191-6355
Shimmy Damper

121916355
803-157.01.00.00: RNCC: 3 | RNVC: 2
803-157-01-00-00: RNCC: 5 | RNVC: 9

17 Feb 1982

5340-12-322-5068
Mounting Bracket

123225068
076-364030-000-0: RNCC: 2 | RNVC: 2
076-364030-000-0: RNCC: 3 | RNVC: 2

28 Aug 1990

5340-12-196-9544
Mending Plate

121969544
A-295066-401: RNCC: 3 | RNVC: 2
A295066-401: RNCC: 5 | RNVC: 2

5 Sep 1983

5340-12-304-9626
Angle Bracket

123049626
P-296874-446: RNCC: 3 | RNVC: 2
P296874-446: RNCC: 5 | RNVC: 2

11 Sep 1985

5340-12-125-2510
Loop Clamp

121252510
DIN3016-1-D1-22X9-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-22X9-W1-2: RNCC: 3 | RNVC: 2
RSGU1.22/9: RNCC: 3 | RNVC: 2
9410009022: RNCC: 5 | RNVC: 2
RSGU1100-22-9: RNCC: 5 | RNVC: 2
RSGU1100.22/9: RNCC: 5 | RNVC: 2
DIN3016-D1-22X9-W1-2: RNCC: 5 | RNVC: 9
VG95931-D22X9-W1: RNCC: 5 | RNVC: 9
VG95931D22X9W1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-371-0386
Catch Strike

123710386
V934L02-1BP: RNCC: 3 | RNVC: 2

30 Jan 2007

5340-12-191-4074
Pad Eye

121914074
C22136-A1000-C851: RNCC: 3 | RNVC: 2
C22136A1000C851: RNCC: 5 | RNVC: 2

1 Feb 1982

5340-12-358-5991
Access Cover

123585991
64292162: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-12-360-8675
Dust And Moisture Seal Protective Cover

123608675
83-8241: RNCC: 3 | RNVC: 2

17 Jul 2003

5340-12-356-3696
Angle Bracket

123563696
2339-060000A05B: RNCC: 3 | RNVC: 2

19 Feb 2002

5340-12-326-6569
Access Cover

123266569
5802017-710537.00: RNCC: 2 | RNVC: 2
7801761150: RNCC: 3 | RNVC: 2
5802017-710537.00: RNCC: 5 | RNVC: 2
5802017-710537-00: RNCC: 5 | RNVC: 9
78017 61150: RNCC: 5 | RNVC: 9

18 Oct 1991

5340-12-198-8191
Barrel Bolt

121988191
2512-75MM: RNCC: 3 | RNVC: 2
2512-75: RNCC: 5 | RNVC: 2
2512/75MM: RNCC: 5 | RNVC: 2
2512/75MM-MS: RNCC: 5 | RNVC: 2
2512-75X34X8: RNCC: 5 | RNVC: 2

28 Feb 1984

5340-12-317-8186
Mending Plate

123178186
1020000177: RNCC: 3 | RNVC: 2
467-449/5183-06-00-06: RNCC: 5 | RNVC: 2

17 May 1989

5340-12-194-2469
Dust And Moisture Seal Protective Cap

121942469
66.3505.210.06-A001: RNCC: 3 | RNVC: 2
582571: RNCC: 5 | RNVC: 2
66.3505.210.06A001: RNCC: 5 | RNVC: 9

14 Oct 1982

5340-12-306-5077
Shelf Bracket

123065077
287.42.421: RNCC: 3 | RNVC: 2

6 Mar 1986

5340-12-122-1369

5340-12-177-6457
Eye Hook

121776457
27-04.21: RNCC: 3 | RNVC: 2
27-04-21: RNCC: 5 | RNVC: 2
8-01-96: RNCC: 5 | RNVC: 2
8.01.96: RNCC: 5 | RNVC: 2

12 Feb 1979

5340-12-318-6849
Angle Bracket

123186849
704-121405-903-0: RNCC: 3 | RNVC: 2

8 Aug 1989

5340-12-324-2169
Angle Bracket

123242169
2300109-180000.081.0: RNCC: 2 | RNVC: 2
2300109-180000.081.0: RNCC: 3 | RNVC: 2

29 Jan 1991

5340-12-344-8147
Door Button

123448147
ST6600148-202300.00: RNCC: 2 | RNVC: 2
ST6600148-202300.00: RNCC: 3 | RNVC: 2

11 Dec 1997

5340-12-184-7775
Platte

121847775
5801505-31117: RNCC: 3 | RNVC: 2

16 Aug 1980

5340-12-177-6156
Bridge Clamp

121776156
2300002-151180.005: RNCC: 2 | RNVC: 2
2300002-151180.005: RNCC: 3 | RNVC: 2
2300002-151180-005: RNCC: 5 | RNVC: 9
2300002-151180.005: RNCC: 5 | RNVC: 9

9 Feb 1979

5340-12-304-8678
Mending Plate

123048678
NO PRIMARY REF 12-304-8678: RNCC: 3 | RNVC: 2
6932 154562: RNCC: 5 | RNVC: 9

29 Aug 1985

5340-12-701-2516
Mounting Bracket

127012516
VG95211-ML-127012516: RNCC: 2 | RNVC: 2
5.12.3700.3550.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-8297
Mounting Plate

127018297
5.99.0600.0150.98: RNCC: 3 | RNVC: 2
155.6100-14362: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-323-8484
Electrical-Mechanical Equipment Post

123238484
C22107-A302-C55: RNCC: 3 | RNVC: 2

27 Dec 1990

5340-12-337-9489
Mounting Plate

123379489
201226: RNCC: 3 | RNVC: 2
24K03-0090-01.011: RNCC: 5 | RNVC: 2

4 May 1995

5340-12-701-9975
Loop Clamp

127019975
VG95211-ML-127019975: RNCC: 2 | RNVC: 2
155N464-731: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-359-5533
Spring Tension Clip

123595533
A1Z10292679: RNCC: 3 | RNVC: 2
10292679: RNCC: 5 | RNVC: 2

17 Feb 2003

5340-12-320-4239
Retaining Strap

123204239
3666 0147 892: RNCC: 3 | RNVC: 2

12 Jan 1990

5340-12-300-2717
Mending Plate

123002717
A11A241303411: RNCC: 3 | RNVC: 2

19 Jul 1984

5340-12-318-4796
Manual Control Lever

123184796
54.0062.351.11: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-12-199-8012
Angle Bracket

121998012
5802017-601015.00: RNCC: 2 | RNVC: 2
5802017-601015.00: RNCC: 3 | RNVC: 2

31 May 1984

5340-12-325-1938
Snap Hook

123251938
88.07.00000.0040: RNCC: 3 | RNVC: 2
5297: RNCC: 3 | RNVC: 2
50014200: RNCC: 5 | RNVC: 2

14 May 1991

5340-12-370-5162
Retaining Strap

123705162
6684921740: RNCC: 3 | RNVC: 2
668 492 17 40: RNCC: 5 | RNVC: 2

16 Nov 2006

5340-12-360-6776
Mounting Plate

123606776
352650: RNCC: 3 | RNVC: 2
10-0076-662: RNCC: 5 | RNVC: 2

27 Jun 2003

5340-12-175-5598
Flush Catch Claw

121755598
KN508-1M1: RNCC: 3 | RNVC: 2
81.08340-0055: RNCC: 5 | RNVC: 2
81083400055: RNCC: 5 | RNVC: 2

27 Sep 1978

5340-12-393-7162
Mounting Plate

123937162
11.44143-0169: RNCC: 3 | RNVC: 2
11.44143-0169: RNCC: 5 | RNVC: 2

7 Oct 2013

5340-12-368-1327
Mounting Bracket

123681327
5161-370201A00C: RNCC: 2 | RNVC: 2
5161-370201A00C: RNCC: 3 | RNVC: 2

14 Dec 2005

5340-12-390-1354
Angle Bracket

123901354
2300559-063100.032.001: RNCC: 2 | RNVC: 2
2300559-063100.032.001: RNCC: 3 | RNVC: 2

9 Oct 2012

5340-12-375-8796
Roller Holder

123758796
F1.1697-00-01-19.20-00: RNCC: 3 | RNVC: 2
G77527: RNCC: 5 | RNVC: 2

16 Jul 2008

5340-12-318-2398
Buckle

123182398
SE01151: RNCC: 3 | RNVC: 2
5340001732: RNCC: 5 | RNVC: 2
01151: RNCC: 5 | RNVC: 2
01155: RNCC: 5 | RNVC: 2
SE01155: RNCC: 5 | RNVC: 2
71057: RNCC: 5 | RNVC: 2
C123-Z16-C41: RNCC: 5 | RNVC: 2
DIN60060-C3-25MM: RNCC: 5 | RNVC: 9

22 Jun 1989

5340-12-323-9078
Webbing Strap

123239078
6099D-841: RNCC: 3 | RNVC: 2
6099-961: RNCC: 5 | RNVC: 2
G-Y6099D-841: RNCC: 5 | RNVC: 2

8 Jan 1991

5340-12-306-3073
Resilient Mount

123063073
DIN95369-A3-1-CR-AL: RNCC: 2 | RNVC: 2
151005-M10-CR.AL-50: RNCC: 5 | RNVC: 2
0716111021: RNCC: 5 | RNVC: 2
60-200-040 L: RNCC: 5 | RNVC: 9
C2020 L: RNCC: 5 | RNVC: 9
VG95369-A3-1-CR-AL: RNCC: 5 | RNVC: 9
C 2020 L: RNCC: 5 | RNVC: 9
C2020L: RNCC: 5 | RNVC: 9

18 Feb 1986

5340-12-333-2892
Mounting Bracket

123332892
LB-IV/2-40E01-41: RNCC: 3 | RNVC: 2

22 Nov 1993

5340-12-377-6300
Spacing Threaded Standoff

123776300
316096: RNCC: 3 | RNVC: 2
0854-03-20-00/37: RNCC: 5 | RNVC: 2

29 Jan 2009

5340-12-199-4201
Angle Bracket

121994201
2300088-311108.01: RNCC: 2 | RNVC: 2
2300088-311108-01: RNCC: 5 | RNVC: 9

20 Apr 1984

5340-12-311-0562
Bow Handle

123110562
25704-190251.01.0: RNCC: 2 | RNVC: 2
25704-190251.01.0: RNCC: 3 | RNVC: 2

22 Jul 1987

5340-12-328-6177
Mending Plate

123286177
5802259-25.004: RNCC: 2 | RNVC: 2
5802259-25.004: RNCC: 3 | RNVC: 2

10 Jun 1992

5340-12-701-4953
Mounting Bracket

127014953
VG95211-ML-127014953: RNCC: 2 | RNVC: 2
5.12.5850.1740.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-6451
Loop Clamp

127026451
VG95211-ML-127026451: RNCC: 2 | RNVC: 2
987S50-50-15-BP: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-328-4636
Webbing Strap

123284636
2300354-949900.006: RNCC: 2 | RNVC: 2
70701-150040-00: RNCC: 5 | RNVC: 2
70701-150040-00: RNCC: 5 | RNVC: 9

21 May 1992

5340-12-372-4714
Flush Bolt

123724714
3115-0004: RNCC: 2 | RNVC: 2
3115-0004: RNCC: 3 | RNVC: 2

19 Jul 2007

5340-12-307-9916
Nonmetallic Bumper

123079916
5801434-512800.00: RNCC: 2 | RNVC: 2
7800542800: RNCC: 3 | RNVC: 2
78005 42800: RNCC: 5 | RNVC: 9

18 Aug 1986

5340-12-198-1316
Angle Bracket

121981316
C42080-A6-C55: RNCC: 3 | RNVC: 2

22 Dec 1983

5340-12-149-9188
Bow Handle

121499188
C22107-A69-C238: RNCC: 3 | RNVC: 2
C22107A69C238: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-126-0350
Turnbuckle

121260350
87.03.03.00000.0009: RNCC: 3 | RNVC: 2
MS-SPDIN1478-M10-2GABELN-MS-MUTT: RNCC: 5 | RNVC: 9
DIN1478-SPM10-GABEL-MESSING: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-4366
Retaining Band

127014366
VG95211-ML-127014366: RNCC: 2 | RNVC: 2
5.12.5313.2020.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-329-6530
Loop Clamp

123296530
DIN3015-L-KP-3-R-22-AL: RNCC: 2 | RNVC: 2
322AL: RNCC: 3 | RNVC: 2
RAAR-322: RNCC: 3 | RNVC: 2
RAAR-322: RNCC: 5 | RNVC: 2
62640185: RNCC: 5 | RNVC: 2

15 Sep 1992

5340-12-307-6594
Mending Plate

123076594
1218 9353: RNCC: 3 | RNVC: 2
12189353: RNCC: 5 | RNVC: 9
6-226-0-630-043-4: RNCC: 5 | RNVC: 9
6.226.0.630.043.4: RNCC: 5 | RNVC: 9

14 Jul 1986

5340-12-192-6083
Angle Bracket

121926083
5835-21.003: RNCC: 3 | RNVC: 2
5835-21-003: RNCC: 5 | RNVC: 2

10 May 1982

5340-12-340-8748
Caster Frame

123408748
916562-3001: RNCC: 3 | RNVC: 2
9165623001: RNCC: 5 | RNVC: 2

26 Jun 1996

5340-12-359-7172
Mounting Plate

123597172
33067-001-007: RNCC: 3 | RNVC: 2

5 Mar 2003

5340-12-302-5294
Electrical-Mechanical Equipment Post

123025294
VG95148B7XM4X10-ST-B2C: RNCC: 2 | RNVC: 2
VG95148B7XM4X10-ST-B2C: RNCC: 3 | RNVC: 2
M4/M4X10WN0425031-ST-B2G: RNCC: 3 | RNVC: 2
048310420: RNCC: 5 | RNVC: 2

10 Jan 1985

5340-12-170-8865
Helical Compression Spring Seat

121708865
6560016: RNCC: 3 | RNVC: 2
30014223: RNCC: 5 | RNVC: 2
81907120298: RNCC: 5 | RNVC: 2
81.90712-0298: RNCC: 5 | RNVC: 2

19 Aug 1977

5340-12-325-6790
Mounting Plate

123256790
5400026-2900-03: RNCC: 2 | RNVC: 2
5400026-2900-03: RNCC: 3 | RNVC: 2

28 Jun 1991

5340-12-337-9865
Webbing Strap

123379865
42482/5100-07: RNCC: 3 | RNVC: 2
42482510007: RNCC: 5 | RNVC: 2

9 May 1995

5340-12-393-7706
Dust And Moisture Seal Protective Cover

123937706
10104353: RNCC: 3 | RNVC: 2

9 Oct 2013

5340-12-383-8081
Cremone Bolt

123838081
ML10BW1SI543: RNCC: 3 | RNVC: 2

9 Dec 2010

5340-12-366-5288
Mounting Plate

123665288
947195277: RNCC: 3 | RNVC: 2
3202-432.01.01.101-001: RNCC: 5 | RNVC: 2

3 May 2005

5340-12-355-1542
Angle Bracket

123551542
1603295-3400: RNCC: 3 | RNVC: 2

16 Oct 2001

5340-12-326-9881
Mounting Plate

123269881
6324736: RNCC: 3 | RNVC: 2

18 Nov 1991

5340-12-368-3566
Angle Bracket

123683566
T531M5001103: RNCC: 3 | RNVC: 2

22 Feb 2006

5340-12-010-4686

5340-12-388-1278
Expansion Shield

123881278
070111: RNCC: 3 | RNVC: 2

27 Feb 2012

5340-12-330-5385
Handle Grip

123305385
25171150301C: RNCC: 3 | RNVC: 2
25171150301: RNCC: 5 | RNVC: 2

6 Jan 1993

5340-12-337-4413
Dust And Moisture Seal Protective Plug

123374413
0009972020: RNCC: 3 | RNVC: 2

6 Mar 1995

5340-12-334-4884
Access Cover

123344884
078 12 0550 9040: RNCC: 2 | RNVC: 2
078 12 0550 9040: RNCC: 3 | RNVC: 2

16 May 1994

5340-12-314-5076
Mounting Bracket

123145076
272.330 698: RNCC: 2 | RNVC: 2
272.330.698: RNCC: 3 | RNVC: 2
272.330 698: RNCC: 5 | RNVC: 9

14 Jul 1988

5340-12-182-1611
Retaining Strap

121821611
2300033-430000.12: RNCC: 2 | RNVC: 2
2300033-430000-12: RNCC: 5 | RNVC: 9
2300033-430000-12: RNCC: 5 | RNVC: 9

16 Jan 1980

5340-12-383-2670
Access Cover

123832670
N09FT-06Z01-V03: RNCC: 3 | RNVC: 2

30 Sep 2010

5340-12-375-7592
Block Clamp

123757592
RAN10-112: RNCC: 3 | RNVC: 2

2 Jul 2008

5340-12-701-1556
Mounting Bracket

127011556
VG95211-ML-127011556: RNCC: 2 | RNVC: 2
5.12.0220.1830.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-9922
Loop Clamp

127019922
VG95211-ML-127019922: RNCC: 2 | RNVC: 2
155N464-39: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-387-0116
Dust And Moisture Seal Protective Cap-Plug

123870116
1220540: RNCC: 3 | RNVC: 2
1220540: RNCC: 5 | RNVC: 9

26 Oct 2011

5340-12-352-8515
Dust And Moisture Seal Protective Cover

123528515
4256890208: RNCC: 3 | RNVC: 2

20 Dec 2000

5340-12-347-8812
Mechanical Stop

123478812
2995.23.55: RNCC: 2 | RNVC: 2
2995.23.55: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-12-329-2558
Multiple Angle Bracket

123292558
M611211: RNCC: 3 | RNVC: 9

29 Jul 1992

5340-12-702-1886
Mounting Bracket

127021886
VG95211-ML-127021886: RNCC: 2 | RNVC: 2
30.7208.1205: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-363-1855
Dust And Moisture Seal Protective Cap

123631855
73735-6D: RNCC: 3 | RNVC: 2

11 May 2004

5340-12-326-0363
Spring Loaded Cylinder Fastener

123260363
101-365012-000-0: RNCC: 2 | RNVC: 2
101-365012-000-0: RNCC: 3 | RNVC: 2

1 Aug 1991

5340-12-354-4155
Rod End Connector

123544155
S55630-01-6-220: RNCC: 3 | RNVC: 2

10 Jul 2001

5340-12-312-9044
Mounting Bracket

123129044
5801984-200130.000.0: RNCC: 2 | RNVC: 2
5801984-200130.000.0: RNCC: 3 | RNVC: 2

18 Feb 1988

5340-12-388-8824
Mending Plate

123888824
5820140095: RNCC: 3 | RNVC: 2

3 May 2012

5340-12-308-6258
Mending Plate

123086258
6183165: RNCC: 3 | RNVC: 2
6183165: RNCC: 5 | RNVC: 2
1256-10.042: RNCC: 5 | RNVC: 9

30 Oct 1986

5340-12-324-6317
Webbing Strap

123246317
79017/026-1100-0100: RNCC: 3 | RNVC: 2
79017/026-1100-100: RNCC: 3 | RNVC: 2
79017/026-1100-0100: RNCC: 5 | RNVC: 9
79017/026-1100-100: RNCC: 5 | RNVC: 9

8 Mar 1991

5340-12-197-6088
Dust And Moisture Seal Protective Cap

121976088
5800401-8343.015: RNCC: 2 | RNVC: 2
2433924708: RNCC: 3 | RNVC: 2
53.3032.060.01: RNCC: 3 | RNVC: 2
5800401-8343-015: RNCC: 5 | RNVC: 2
455P0-15E: RNCC: 5 | RNVC: 2
5800401-8343.015: RNCC: 5 | RNVC: 2
352202072210: RNCC: 5 | RNVC: 2
5800401-8343-015: RNCC: 5 | RNVC: 9
24339 24708: RNCC: 5 | RNVC: 9
53.3032.060.01: RNCC: 5 | RNVC: 9

7 Nov 1983

5340-12-383-8173
Angle Bracket

123838173
540008-4048A: RNCC: 2 | RNVC: 2
540008-4048A: RNCC: 3 | RNVC: 2
4048A: RNCC: 5 | RNVC: 2

9 Dec 2010

5340-12-346-1412
Padlock

123461412
93309757: RNCC: 3 | RNVC: 2
ABUS77/40: RNCC: 3 | RNVC: 2

17 Jun 1998

5340-12-184-3359
Mounting Bracket

121843359
5801357-1800.05F: RNCC: 2 | RNVC: 2
5801357-1800.05F: RNCC: 3 | RNVC: 2
5801357-1800-05F: RNCC: 5 | RNVC: 9
5801357-1800-05F: RNCC: 5 | RNVC: 9
5801357-1800-05F: RNCC: 5 | RNVC: 9

17 Jul 1980

5340-12-702-2470
Mounting Bracket

127022470
VG95211-ML-127022470: RNCC: 2 | RNVC: 2
30.7803.36: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-196-5067
Angle Bracket

121965067
P-230711-063: RNCC: 3 | RNVC: 2
P230711-063: RNCC: 5 | RNVC: 2

13 Jul 1983

5340-12-197-5163
Door Hook

121975163
229G-125MM-MMCH: RNCC: 3 | RNVC: 2

27 Oct 1983

5340-12-367-8352
Mounting Plate

123678352
5840983726: RNCC: 3 | RNVC: 2

20 Oct 2005

5340-12-329-5888
Mounting Bracket

123295888
258855: RNCC: 3 | RNVC: 2

4 Sep 1992

5340-12-193-8733
Double Angle Bracket

121938733
5548085: RNCC: 3 | RNVC: 2
554.8085: RNCC: 5 | RNVC: 2

8 Sep 1982

5340-12-380-1740
Dust And Moisture Seal Protective Cover

123801740
225981: RNCC: 3 | RNVC: 2

2 Oct 2009

5340-12-339-1473
Mounting Plate

123391473
4960700266: RNCC: 3 | RNVC: 2

17 Oct 1995

5340-12-196-2288
Angle Bracket

121962288
81429400104: RNCC: 3 | RNVC: 2
81.42940.0104: RNCC: 5 | RNVC: 2

14 Jun 1983

5340-12-355-1817
Pipe Hanger

123551817
201594224: RNCC: 3 | RNVC: 2

19 Oct 2001

5340-12-010-5316

5340-12-317-2547
Rod End Clevis

123172547
81954200013: RNCC: 3 | RNVC: 2
81.95420.0013: RNCC: 5 | RNVC: 2

21 Mar 1989

5340-12-175-5900
Retaining Strap

121755900
R0176: RNCC: 3 | RNVC: 2
51.97401-0291: RNCC: 5 | RNVC: 2
51974010291: RNCC: 5 | RNVC: 2

3 Oct 1978

5340-12-375-7983
Mounting Plate

123757983
03-128608/00: RNCC: 3 | RNVC: 2
03-128608/00: RNCC: 5 | RNVC: 9

4 Jul 2008

5340-12-381-2361
Loop Clamp

123812361
SP-106A-PP-IS-M-W10: RNCC: 3 | RNVC: 2

25 Jan 2010

5340-12-193-3656
Pipe Bracket

121933656
5801964-104000.000: RNCC: 2 | RNVC: 2
5801964-104000.000: RNCC: 3 | RNVC: 2
5801964-104000.000: RNCC: 5 | RNVC: 9
5801964-104000-000: RNCC: 5 | RNVC: 9

14 Jul 1982

5340-12-356-1731
Angle Bracket

123561731
JN0145-01C25: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-12-356-8451
Angle Bracket

123568451
ED88-0100-01001-129: RNCC: 3 | RNVC: 2

10 Apr 2002

5340-12-317-3249
Dust And Moisture Seal Protective Cap

123173249
4900064-414.002: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-373-2095
Dust And Moisture Seal Protective Plug

123732095
EE-M0054-26: RNCC: 3 | RNVC: 2

10 Oct 2007

5340-12-317-3179
Strap Bolt

123173179
4900064-4111.034: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-382-2446
Clamping Catch

123822446
504.250 E: RNCC: 3 | RNVC: 2

27 May 2010

5340-12-197-0745
Lock-Release Lever

121970745
6132.992.4: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-12-326-5797
Spring Tension Clip

123265797
2300232-973000.002.0: RNCC: 2 | RNVC: 2
2300232-973000.002.0: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-12-322-1523
Expansion Shield

123221523
5/31: RNCC: 3 | RNVC: 9
0 10 100 02: RNCC: 5 | RNVC: 9

27 Jul 1990

5340-12-318-3854
Mounting Bracket

123183854
22014.0.08.720.00: RNCC: 2 | RNVC: 2
22014.0.08.720.00: RNCC: 3 | RNVC: 2

10 Jul 1989

5340-12-353-7996
Runner

123537996
5.043.576.9: RNCC: 3 | RNVC: 2

10 May 2001

5340-12-132-7427
Manual Control Handle

121327427
DIN99-N80: RNCC: 2 | RNVC: 2
2447.308: RNCC: 3 | RNVC: 2
N80DIN99: RNCC: 5 | RNVC: 2
9SG096078-00: RNCC: 5 | RNVC: 2
0623920: RNCC: 5 | RNVC: 2
E13XM10DIN99: RNCC: 5 | RNVC: 2
623920: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-9971
Loop Clamp

127019971
VG95211-ML-127019971: RNCC: 2 | RNVC: 2
155N464-717: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-164-4658
Dust And Moisture Seal Protective Cap

121644658
23290-183001-013: RNCC: 2 | RNVC: 2
23290-183001.013: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-371-4775
Plain Solid Disk

123714775
23302-063300.02: RNCC: 2 | RNVC: 2
23302-063300.02: RNCC: 3 | RNVC: 2
8406738: RNCC: 5 | RNVC: 2

4 Apr 2007

5340-12-172-9529
Helical Compression Spring Retainer

121729529
14021-15003-03: RNCC: 3 | RNVC: 2
893617: RNCC: 5 | RNVC: 2
14021-15003-03: RNCC: 5 | RNVC: 9

6 Mar 1978

5340-12-306-0730
Access Cover

123060730
5801984-200262.012.0: RNCC: 2 | RNVC: 2
5801984-200262.012.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-335-8677
Loop Clamp

123358677
4900317-610010.00: RNCC: 2 | RNVC: 2
4900317-610010.00: RNCC: 5 | RNVC: 2

27 Sep 1994

5340-12-311-8428
Access Cover

123118428
2300074-5881.00: RNCC: 2 | RNVC: 2
2300074-5881.00: RNCC: 3 | RNVC: 2
2300074-5881.00: RNCC: 5 | RNVC: 9

22 Oct 1987

5340-12-328-6797
Angle Bracket

123286797
117-181001.04: RNCC: 3 | RNVC: 2

13 Jun 1992

5340-12-380-4697
Webbing Strap

123804697
4100036-151155.000.0: RNCC: 2 | RNVC: 2
4100036-151155.000.0: RNCC: 3 | RNVC: 2

2 Nov 2009

5340-12-391-0567
Manual Control Lever

123910567
9999015-161009.000.0: RNCC: 2 | RNVC: 2
9999015-161009.000.0: RNCC: 3 | RNVC: 2

18 Jan 2013

5340-12-360-9264
Mounting Bracket

123609264
0000.688425: RNCC: 3 | RNVC: 2
999999-01633-4/LINKS: RNCC: 5 | RNVC: 2

24 Jul 2003

5340-12-192-1272
Rod End Clevis

121921272
15374-01: RNCC: 3 | RNVC: 2
484493: RNCC: 5 | RNVC: 2

24 Mar 1982

5340-12-338-4680
Access Door

123384680
2160-8851-020: RNCC: 3 | RNVC: 2
2160-8851-020: RNCC: 5 | RNVC: 9

14 Jul 1995

5340-12-702-2168
Mounting Bracket

127022168
VG95211-ML-127022168: RNCC: 2 | RNVC: 2
30.7222.640.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-337-4658
Access Cover

123374658
81321060194: RNCC: 3 | RNVC: 2
81.32106-0194: RNCC: 5 | RNVC: 2
1249 301 532: RNCC: 5 | RNVC: 2

8 Mar 1995

5340-12-384-6682
Fusible Plug

123846682
I000667: RNCC: 3 | RNVC: 2
4052063006679: RNCC: 5 | RNVC: 2

17 Mar 2011

5340-12-392-1515
Retaining Strap

123921515
6735460475: RNCC: 3 | RNVC: 2

8 May 2013

5340-12-122-0295
Halter

121220295
27-103-01H13: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-308-0518
Angle Bracket

123080518
2602-15.05: RNCC: 3 | RNVC: 2

26 Aug 1986

5340-12-702-1981
Mounting Bracket

127021981
VG95211-ML-127021981: RNCC: 2 | RNVC: 2
30.7210.360: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-151-6799
Rod End Clevis

121516799
160-24593-17: RNCC: 3 | RNVC: 2
160-24593-17: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-353-1524
Mounting Bracket

123531524
60716-872: RNCC: 3 | RNVC: 2
KB60716-872: RNCC: 5 | RNVC: 2

2 Feb 2001

5340-12-300-2032
Bow Handle

123002032
C42300-A135-C55: RNCC: 3 | RNVC: 2

14 Jul 1984

5340-12-379-0857
Section Block Clamp

123790857
D0110528-001: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-12-355-9506
Mending Plate

123559506
J92220660-001: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-12-184-8805
Rigid Caster

121848805
105-220: RNCC: 3 | RNVC: 2

26 Aug 1980

5340-12-311-6825
Access Door

123116825
5801669-7330.00: RNCC: 2 | RNVC: 2
5801669-7330.00: RNCC: 3 | RNVC: 2
5801669-7330.00: RNCC: 5 | RNVC: 2
5801669-7330.00: RNCC: 5 | RNVC: 9

6 Oct 1987

5340-12-304-4635
Webbing Strap

123044635
2300005-4111.00: RNCC: 2 | RNVC: 2
2300005-4111.00: RNCC: 3 | RNVC: 2
2300005-4111.00: RNCC: 5 | RNVC: 9

19 Jul 1985

5340-12-044-4408

5340-12-361-2132
Angle Bracket

123612132
J92228258-401: RNCC: 3 | RNVC: 2

4 Sep 2003

5340-12-700-9242
Loop Clamp

127009242
VG95211-ML-127009242: RNCC: 2 | RNVC: 2
200N7-150: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-171-1608
Spring Loaded Cylinder Fastener

121711608
81971206006: RNCC: 3 | RNVC: 2
81.97120-6006: RNCC: 5 | RNVC: 2
263A/XVI: RNCC: 5 | RNVC: 9
263A16: RNCC: 5 | RNVC: 9
BK7010: RNCC: 5 | RNVC: 9

12 Sep 1977

5340-12-342-8787
Helical Compression Spring Seat

123428787
B47461-001: RNCC: 3 | RNVC: 2
B47461: RNCC: 5 | RNVC: 2

11 Apr 1997

5340-12-199-0312
Angle Bracket

121990312
C42165-A151-C132: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-12-322-9272
Mounting Bracket

123229272
1002-04: RNCC: 3 | RNVC: 2
00796274: RNCC: 5 | RNVC: 2

8 Oct 1990

5340-12-310-6851
Bow Handle

123106851
023186: RNCC: 3 | RNVC: 2

19 Jun 1987

5340-12-389-1658
Retaining Strap

123891658
565032: RNCC: 3 | RNVC: 2
565032: RNCC: 5 | RNVC: 2
2500600757: RNCC: 5 | RNVC: 2
07410157: RNCC: 5 | RNVC: 9

31 May 2012

5340-12-360-5645
Plain Solid Disk

123605645
NN30380P01: RNCC: 3 | RNVC: 2

6 Jun 2003

5340-12-381-8344
Loop Clamp

123818344
000605-213000.04: RNCC: 2 | RNVC: 2
000605-213000.04: RNCC: 3 | RNVC: 2
22170: RNCC: 5 | RNVC: 2

8 Apr 2010

5340-12-350-7335
Mounting Bracket

123507335
13291401: RNCC: 3 | RNVC: 2

12 May 2000

5340-12-122-6235
Loop Clamp

121226235
4049951301: RNCC: 3 | RNVC: 2
402010101700: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-340-5451
Double Angle Bracket

123405451
5903000040: RNCC: 3 | RNVC: 2
5903000040: RNCC: 5 | RNVC: 2
5903000040: RNCC: 5 | RNVC: 2
590 300 00 40: RNCC: 5 | RNVC: 2

30 Apr 1996

5340-12-384-7086
Half Grooved Segment

123847086
F1.1781-30-01-00.00-02: RNCC: 3 | RNVC: 2

22 Mar 2011

5340-12-328-6176
Mending Plate

123286176
5801684-11714.002: RNCC: 3 | RNVC: 2

10 Jun 1992

5340-12-346-5818
Dust And Moisture Seal Protective Cap

123465818
5052-090125001: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-12-305-0683
Lock-Release Lever

123050683
BS252.24/5: RNCC: 3 | RNVC: 2
750158: RNCC: 5 | RNVC: 2

24 Sep 1985

5340-12-312-6650
Nonmetallic Solid Wheel

123126650
4.0116: RNCC: 3 | RNVC: 2
570572177: RNCC: 5 | RNVC: 2
40116: RNCC: 5 | RNVC: 2
40116: RNCC: 5 | RNVC: 2
0698768: RNCC: 5 | RNVC: 2
40116: RNCC: 5 | RNVC: 2

25 Jan 1988

5340-12-378-5903
Handle Grip

123785903
81.97010-6021: RNCC: 3 | RNVC: 2

23 Apr 2009

5340-12-151-4666
Electrical-Mechanical Equipment Post

121514666
23111-1883-00: RNCC: 2 | RNVC: 2
23111-1883-00: RNCC: 5 | RNVC: 2
23111-1883-00: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-315-5267
Webbing Strap

123155267
A1301-2950MM: RNCC: 3 | RNVC: 2

3 Nov 1988

5340-12-361-0377
Angle Bracket

123610377
J92228156-401: RNCC: 3 | RNVC: 2

12 Aug 2003

5340-12-165-9931
Nonmetallic Bumper

121659931
EE96/96KERN-D-QUALRTEIIKOMPLETT: RNCC: 3 | RNVC: 2
59006101: RNCC: 3 | RNVC: 2
E96-96KERNDQUALRTE2K0MPLETT: RNCC: 5 | RNVC: 2
RT600303SB: RNCC: 5 | RNVC: 2
E96-96KERNDQUALRTE2K0MPLETT: RNCC: 5 | RNVC: 2
RT600303SB: RNCC: 5 | RNVC: 2
103-210-030: RNCC: 5 | RNVC: 9

24 Jul 1976

5340-12-305-5969
Loop Clamp

123055969
4064201486: RNCC: 3 | RNVC: 2

26 Nov 1985

5340-12-189-7537
Helical Compression Spring Seat

121897537
3006GVD1030006: RNCC: 3 | RNVC: 2

21 Oct 1981

5340-12-305-5374
Double Angle Bracket

123055374
CF 493 314 AT: RNCC: 3 | RNVC: 2
CF 493 314 AT: RNCC: 5 | RNVC: 2

19 Nov 1985

5340-12-326-4375
Spring Tension Clip

123264375
6753210133: RNCC: 3 | RNVC: 2

16 Sep 1991

5340-12-094-6786

5340-12-304-6685
Loop Clamp

123046685
326-52-0300-25: RNCC: 3 | RNVC: 2
326-52-0200-25: RNCC: 3 | RNVC: 2

12 Aug 1985

5340-12-350-3840
Section Block Clamp

123503840
J29120348-005: RNCC: 3 | RNVC: 2

23 Mar 2000

5340-12-702-6232
Retaining Strap

127026232
VG95211-ML-127026232: RNCC: 2 | RNVC: 2
70 OST1 10056-71: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-353-8225
Loop Clamp

123538225
JN0205-110: RNCC: 3 | RNVC: 2

14 May 2001

5340-12-333-2014
Butt Hinge

123332014
00098387740: RNCC: 3 | RNVC: 9
9838774: RNCC: 5 | RNVC: 9
328-182471.000: RNCC: 5 | RNVC: 9

9 Nov 1993

5340-12-187-1178
Spring Tension Clip

121871178
LN29789-20: RNCC: 2 | RNVC: 2

6 Mar 1981

5340-12-347-1727
Angle Bracket

123471727
54.1094.291.00: RNCC: 3 | RNVC: 2

6 Nov 1998

5340-12-369-7866
Retaining Bail

123697866
203151: RNCC: 3 | RNVC: 2

16 Aug 2006

5340-12-324-8128
Mending Plate

123248128
702-442200-903-0: RNCC: 3 | RNVC: 2

26 Mar 1991

5340-12-359-9373
Mending Plate

123599373
2500261-185520.005.0: RNCC: 2 | RNVC: 2
2500261-185520.005.0: RNCC: 3 | RNVC: 2

21 Mar 2003

5340-12-304-4307
Angle Bracket

123044307
25704-289730.01.0: RNCC: 2 | RNVC: 2
84027-13.11.01.0: RNCC: 3 | RNVC: 2
84027-13.11.01.0: RNCC: 5 | RNVC: 9

17 Jul 1985

5340-12-196-9469
Lock-Release Lever

121969469
4900059-751790.019.0: RNCC: 3 | RNVC: 2
4900059-751790-019-0: RNCC: 5 | RNVC: 2

5 Sep 1983

5340-12-381-2964
Mounting Plate

123812964
424-04-K3-2: RNCC: 3 | RNVC: 2
4250473100400: RNCC: 5 | RNVC: 2

29 Jan 2010

5340-12-701-4369
Retaining Band

127014369
VG95211-ML-127014369: RNCC: 2 | RNVC: 2
5.12.5313.2040.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-300-6866
Mending Plate

123006866
1000091-3100.04: RNCC: 2 | RNVC: 2
1000091-3100.04: RNCC: 3 | RNVC: 2

23 Aug 1984

5340-12-312-8913
Nonmetallic Solid Wheel

123128913
1070334: RNCC: 2 | RNVC: 2
1070334: RNCC: 3 | RNVC: 2

17 Feb 1988

5340-12-320-1330
Kunst Gleitschiene

123201330
0679001: RNCC: 3 | RNVC: 2

11 Dec 1989

5340-12-123-4572
Retaining Strap

121234572
81974010002: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-027-5796

5340-12-182-1880
Manual Control Handle

121821880
81658155010: RNCC: 3 | RNVC: 2
23230-182605-000-0: RNCC: 5 | RNVC: 9
23230-182605.000.0: RNCC: 5 | RNVC: 9

18 Jan 1980

5340-12-184-4654
Retaining Strap

121844654
0026-2091-020: RNCC: 3 | RNVC: 2
0026-2091-020: RNCC: 5 | RNVC: 9

24 Jul 1980

5340-12-356-8458
Angle Bracket

123568458
ED88-0100-01001-149: RNCC: 3 | RNVC: 2

10 Apr 2002

5340-12-327-7817
Nonmetallic Bumper

123277817
VG95092A5X5X30X8,5NBR70: RNCC: 2 | RNVC: 2
3769-NBR/70-SW: RNCC: 3 | RNVC: 2

4 Mar 1992

5340-12-171-2038
Helical Compression Spring Retainer

121712038
81971205004: RNCC: 3 | RNVC: 2
81.97120-5004: RNCC: 5 | RNVC: 2
263A/XV: RNCC: 5 | RNVC: 9
263A15: RNCC: 5 | RNVC: 9
BK7007: RNCC: 5 | RNVC: 9

16 Sep 1977

5340-12-173-1387
Helical Compression Spring Seat

121731387
23290-181154.001: RNCC: 2 | RNVC: 2
23290-181154-001: RNCC: 5 | RNVC: 9

22 Mar 1978

5340-12-191-2665
Loop Clamp

121912665
23114-5100.09: RNCC: 2 | RNVC: 2
23114-5100.09: RNCC: 3 | RNVC: 2
23114-5100-09: RNCC: 5 | RNVC: 9
23114-5100.09: RNCC: 5 | RNVC: 9
23114-5100-09: RNCC: 5 | RNVC: 9
23114-5100.09: RNCC: 5 | RNVC: 9

20 Jan 1982

5340-12-375-1051
Bumper

123751051
DIN95364-C20X15-NR70ST: RNCC: 2 | RNVC: 2
VG95364-C20X15-NR70ST: RNCC: 5 | RNVC: 9

22 Apr 2008

5340-12-199-0275
Dust And Moisture Seal Protective Plug

121990275
42329/1020-33: RNCC: 3 | RNVC: 2
42329-1020-33: RNCC: 5 | RNVC: 2

21 Mar 1984

5340-12-389-0176
Loop Clamp

123890176
F1.1697-47-01-00.00-07: RNCC: 3 | RNVC: 2

16 May 2012

5340-12-324-7220
Access Door

123247220
CF 454 474 AE: RNCC: 2 | RNVC: 2
CF 454 474 AE: RNCC: 3 | RNVC: 2
CF 454 474 AE: RNCC: 5 | RNVC: 2
CF 324 675 AZ: RNCC: 5 | RNVC: 9

19 Mar 1991

5340-12-375-0560
Bumper

123750560
182820904: RNCC: 3 | RNVC: 2

17 Apr 2008

5340-12-366-0761
Mounting Plate

123660761
4618900816: RNCC: 3 | RNVC: 2

7 Mar 2005

5340-12-393-8229
Section Block Clamp

123938229
T290M2202287: RNCC: 3 | RNVC: 2

15 Oct 2013

5340-12-146-6598
Retaining Strap

121466598
A3WN7855: RNCC: 3 | RNVC: 2
A3WN7855: RNCC: 3 | RNVC: 2
A3WN7855: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-301-9670
Tee Hinge

123019670
3816600071: RNCC: 3 | RNVC: 2

21 Nov 1984

5340-12-337-3787
Dust And Moisture Seal Protective Plug

123373787
81960020386: RNCC: 3 | RNVC: 2
81.96002-0386: RNCC: 5 | RNVC: 2
11 10330: RNCC: 5 | RNVC: 2
11.10330: RNCC: 5 | RNVC: 2
1110330: RNCC: 5 | RNVC: 2

22 Feb 1995

5340-12-302-4453
Bridge Clamp

123024453
4900143-152000: RNCC: 2 | RNVC: 2
4900143-152000: RNCC: 5 | RNVC: 9

29 Dec 1984

5340-12-164-0521
Loop Clamp

121640521
DIN3015-LF-1G-12-PP-W1: RNCC: 2 | RNVC: 2
HRGL1C1TM12PP STBL: RNCC: 3 | RNVC: 2
RAPG9-112: RNCC: 3 | RNVC: 2
SM112A-PPH-LI: RNCC: 3 | RNVC: 2
SM112A-PPH-LI: RNCC: 5 | RNVC: 2
HR1LB3-12.0/1GLATT-SM6: RNCC: 5 | RNVC: 2
RAPE9-112-GLATT: RNCC: 5 | RNVC: 2
H-SM112A-PP-LI: RNCC: 5 | RNVC: 2
RAPE9-112-GLATT: RNCC: 5 | RNVC: 2
RAPG9-112: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-182-7815
Quick Release Plunger

121827815
KNM12HWN205S: RNCC: 3 | RNVC: 2
RBN410.1-KNM12: RNCC: 3 | RNVC: 2
GN615-M12-KN: RNCC: 3 | RNVC: 2
1612009: RNCC: 3 | RNVC: 2
03010-12: RNCC: 3 | RNVC: 2
5L.3741.008.90: RNCC: 5 | RNVC: 2
KM12GN615NIR0STA: RNCC: 5 | RNVC: 2
NLM3010-12: RNCC: 5 | RNVC: 9
NLM301-12: RNCC: 5 | RNVC: 9
NLM301.12: RNCC: 5 | RNVC: 9

25 Feb 1980

5340-12-388-8910
Access Cover

123888910
1003993: RNCC: 3 | RNVC: 2
4616800023: RNCC: 5 | RNVC: 2
SK903-044109.000.0: RNCC: 5 | RNVC: 2

3 May 2012

5340-12-159-2293
Nonmetallic Solid Wheel

121592293
A40-1: RNCC: 3 | RNVC: 2
13 9005 157: RNCC: 5 | RNVC: 2
139005157: RNCC: 5 | RNVC: 2
A40-1: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-370-6408
Mounting Bracket

123706408
AH30107P06: RNCC: 3 | RNVC: 2

5 Dec 2006

5340-12-339-5529
Manual Control Lever

123395529
8.316.001.002.02.03: RNCC: 3 | RNVC: 2
3160010010900186: RNCC: 5 | RNVC: 2

5 Dec 1995

5340-12-308-0252
Mending Plate

123080252
WN 1198/4: RNCC: 3 | RNVC: 2
WN1198-4: RNCC: 5 | RNVC: 2

21 Aug 1986

5340-12-359-1510
Mounting Bracket

123591510
ZG5200G338: RNCC: 3 | RNVC: 2
ZG5200G338: RNCC: 5 | RNVC: 9

20 Dec 2002

5340-12-366-0061
Cushioning Pad

123660061
ADV055B: RNCC: 3 | RNVC: 2

28 Feb 2005

5340-12-192-6881
Shimmy Damper

121926881
K70243-1: RNCC: 3 | RNVC: 2
81962100184: RNCC: 5 | RNVC: 2

17 May 1982

5340-12-193-1332
Bow Handle

121931332
0A844.18-01-20-00-008: RNCC: 3 | RNVC: 2
844.18-01-20-00-008-0A: RNCC: 5 | RNVC: 2
844-18-012000008-0A: RNCC: 5 | RNVC: 2

23 Jun 1982

5340-12-372-5720
Bow Handle

123725720
114.22.280: RNCC: 3 | RNVC: 2
0.114.22.280: RNCC: 5 | RNVC: 2

31 Jul 2007

5340-12-174-2825
Dust And Moisture Seal Protective Plug

121742825
700M8X1: RNCC: 3 | RNVC: 2
9561490090: RNCC: 5 | RNVC: 2
GPN700M8X1: RNCC: 5 | RNVC: 2
GPN700M8X1F0RMA: RNCC: 5 | RNVC: 9
M8X1GPN700F0RMA: RNCC: 5 | RNVC: 9
GPN700,M8X1 FORM A: RNCC: 5 | RNVC: 9
700081000: RNCC: 5 | RNVC: 9

19 Jun 1978

5340-12-322-5069
Mounting Bracket

123225069
076-364000-908-0: RNCC: 2 | RNVC: 2
076-364000-908-0: RNCC: 3 | RNVC: 2

28 Aug 1990

5340-12-377-3655
Angle Bracket

123773655
8605059.1.092.00: RNCC: 3 | RNVC: 2

13 Jan 2009

5340-12-327-0948
Mounting Bracket

123270948
6.226.0.637.157.5: RNCC: 3 | RNVC: 9

29 Nov 1991

5340-12-334-4882
Runner

123344882
104-111000-904-0: RNCC: 2 | RNVC: 2
104-111000-904-0: RNCC: 3 | RNVC: 2

16 May 1994

5340-12-327-2893
Dust And Moisture Seal Protective Cap

123272893
1227 0061: RNCC: 3 | RNVC: 2
1227 0061EE0119-48: RNCC: 5 | RNVC: 2
6.0280.51.0.0014: RNCC: 5 | RNVC: 9

7 Jan 1992

5340-12-191-1141
Rigid Caster

121911141
T4-4815-4: RNCC: 3 | RNVC: 2

13 Jan 1982

5340-12-316-8242
Electrical-Mechanical Equipment Post

123168242
VG95148A8XM3X236,6-ST-E2A: RNCC: 2 | RNVC: 2
3555565: RNCC: 3 | RNVC: 2

16 Feb 1989

5340-12-701-2777
Mounting Bracket

127012777
VG95211-ML-127012777: RNCC: 2 | RNVC: 2
5.12.5101.0062.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-363-7319
Mounting Bracket

123637319
1873-055316.000.0: RNCC: 3 | RNVC: 2

20 Jul 2004

5340-12-701-6500
Mounting Plate

127016500
VG95211-ML-127016500: RNCC: 2 | RNVC: 2
5.12.7205.1110.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-196-4342
Casement Fastener

121964342
P-855943-015: RNCC: 3 | RNVC: 2
P855943-015: RNCC: 5 | RNVC: 2

6 Jul 1983

5340-12-179-1344
Snap Hook

121791344
U2-22-2: RNCC: 3 | RNVC: 2
10302252Y054: RNCC: 5 | RNVC: 2

8 Jun 1979

5340-12-365-2642
Mounting Bracket

123652642
2300109-180042.000.0: RNCC: 3 | RNVC: 2

14 Dec 2004

5340-12-323-8124
Angle Bracket

123238124
702-146100-904-0: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-12-701-4342
Loop Clamp

127014342
VG95211-ML-127014342: RNCC: 2 | RNVC: 2
5.12.5313.1000.17: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-8675
Angle Bracket

127018675
VG95211-ML-127018675: RNCC: 2 | RNVC: 2
6485A-4-K: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-6444
Mounting Bracket

127016444
VG95211-ML-127016444: RNCC: 2 | RNVC: 2
5.12.7204.0570.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-198-4275
Angle Bracket

121984275
5801998-210000.01: RNCC: 2 | RNVC: 2
5801998-210000.01: RNCC: 3 | RNVC: 2
5801998-210000.01: RNCC: 5 | RNVC: 9

26 Jan 1984

5340-12-177-6158
Bridge Clamp

121776158
2300002-151310.002: RNCC: 2 | RNVC: 2
2300002-151310.002: RNCC: 3 | RNVC: 2
2300002-151310-002: RNCC: 5 | RNVC: 9
2300002-151310.002: RNCC: 5 | RNVC: 9

9 Feb 1979

5340-12-394-3163
Access Cover

123943163
23-530-JK-467: RNCC: 3 | RNVC: 2

20 Nov 2013

5340-12-125-3652
Rod End Clevis

121253652
DIN71752-G6X12-35S20K-A3P: RNCC: 2 | RNVC: 2
DIN71752-G6X12-35S20K-A3P: RNCC: 3 | RNVC: 2
DIN71752-G6X12-35S20K-A3P: RNCC: 3 | RNVC: 2
G6X12DIN71752-35S20K: RNCC: 5 | RNVC: 2
100200060012/024-35S20K: RNCC: 5 | RNVC: 2
DIN71752-G6X12-35S20K: RNCC: 5 | RNVC: 9
G6X12DIN71752-35S20K: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-094-6981

5340-12-701-2801
Rod End Clevis

127012801
VG95211-ML-127012801: RNCC: 2 | RNVC: 2
5.12.5101.0510.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-310-4212
Turnbuckle

123104212
P-896351-407: RNCC: 3 | RNVC: 2
P896351-407: RNCC: 5 | RNVC: 2

20 May 1987

5340-12-154-3026
Mending Plate

121543026
GR36-21: RNCC: 3 | RNVC: 9
GR0036T021: RNCC: 5 | RNVC: 2
GR0036T021: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-331-9803
Mounting Bracket

123319803
160-74328-03: RNCC: 3 | RNVC: 2
160-74328-03: RNCC: 5 | RNVC: 9

13 Jul 1993

5340-12-350-4855
Mounting Plate

123504855
160-88109-03: RNCC: 3 | RNVC: 2
160-88109-03: RNCC: 5 | RNVC: 2

5 Apr 2000

5340-12-334-3172
Dust And Moisture Seal Protective Plug

123343172
105-80372.03: RNCC: 3 | RNVC: 2
105-80372-03: RNCC: 5 | RNVC: 2

26 Apr 1994

5340-12-172-6181
Access Cover

121726181
1224-208.13: RNCC: 2 | RNVC: 2
532008-0172.000: RNCC: 3 | RNVC: 2
532008-172: RNCC: 3 | RNVC: 2
532008-0172.000: RNCC: 5 | RNVC: 2
532008-172: RNCC: 5 | RNVC: 2
1224-208-13: RNCC: 5 | RNVC: 9
1224-208.13: RNCC: 5 | RNVC: 9

31 Jan 1978

5340-12-319-4794
Mending Plate

123194794
503645: RNCC: 3 | RNVC: 2
503645: RNCC: 5 | RNVC: 2

5 Oct 1989

5340-12-332-7348
Elastic Strap

123327348
00098346800: RNCC: 3 | RNVC: 9
108-440300.000: RNCC: 5 | RNVC: 9
9834680: RNCC: 5 | RNVC: 9

13 Sep 1993

5340-12-379-6677
Retaining Bail

123796677
10146-000020.000.0: RNCC: 2 | RNVC: 2
10146-000020.000.0: RNCC: 3 | RNVC: 2

20 Aug 2009

5340-12-310-1466
Electrical-Mechanical Equipment Post

123101466
VG95148B5,5XM3X13,7-AL: RNCC: 2 | RNVC: 2
VG95148B5,5XM3X13,7-AL: RNCC: 3 | RNVC: 2
516.9536: RNCC: 3 | RNVC: 2
5169536: RNCC: 5 | RNVC: 2

10 Apr 1987

5340-12-311-4314
Nonmetallic Bumper

123114314
EE70/80KERN-B-QUALRTEIIKOMPLETT: RNCC: 3 | RNVC: 2
59006401: RNCC: 3 | RNVC: 2
81.96020.6009: RNCC: 5 | RNVC: 2
MGW640325SB4: RNCC: 5 | RNVC: 2
82200-EE70/80-KERN B KOMPLETT: RNCC: 5 | RNVC: 2
81960206009: RNCC: 5 | RNVC: 2
EE70/80 KERN B KOMPLETT: RNCC: 5 | RNVC: 2

1 Sep 1987

5340-12-301-0632
Manual Control Handle

123010632
2315-201.25(4): RNCC: 3 | RNVC: 2

20 Sep 1984

5340-12-373-1719
Metallic Bumper

123731719
1243280288: RNCC: 3 | RNVC: 2
124 328 02 88: RNCC: 5 | RNVC: 2

5 Oct 2007

5340-12-378-3425
Push Door Plate

123783425
0001032: RNCC: 3 | RNVC: 2

30 Mar 2009

5340-12-381-8809
Spacing Threaded Standoff

123818809
000605-215100.02: RNCC: 2 | RNVC: 2
000605-215100.02: RNCC: 3 | RNVC: 2
43667: RNCC: 5 | RNVC: 2

14 Apr 2010

5340-12-304-5274
Loop Clamp

123045274
LN9490A32: RNCC: 2 | RNVC: 2

26 Jul 1985

5340-12-131-5637

5340-12-161-9256
Retaining Clip

121619256
52-3017-002-12: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-198-0586
Compression Cup

121980586
537171-8360.000: RNCC: 3 | RNVC: 2
53 71 71-8360: RNCC: 5 | RNVC: 9
537171-8360.000: RNCC: 5 | RNVC: 9

15 Dec 1983

5340-12-369-2311
Section Block Clamp

123692311
1404003-000.05: RNCC: 2 | RNVC: 2
1404003-000.05: RNCC: 3 | RNVC: 2

7 Jun 2006

5340-12-190-3345
Nut And Bolt Locking Plate

121903345
03433889: RNCC: 3 | RNVC: 2
3433889EE5091-11: RNCC: 5 | RNVC: 2
5176-11-05.03: RNCC: 5 | RNVC: 2
E5176-11-05.03: RNCC: 5 | RNVC: 2
3433889: RNCC: 5 | RNVC: 9

23 Nov 1981

5340-12-301-1965
Access Cover

123011965
1423-200.104(3): RNCC: 3 | RNVC: 2

27 Sep 1984

5340-12-380-8345
Mounting Bracket

123808345
2300519-970250.000.0: RNCC: 2 | RNVC: 2
2300519-970250.000.0: RNCC: 3 | RNVC: 2

3 Dec 2009

5340-12-133-2815

5340-12-353-7722
Dust And Moisture Seal Protective Cap

123537722
CBD45014P04: RNCC: 3 | RNVC: 2

10 May 2001

5340-12-368-8789
Spring Tension Clip

123688789
191 837 453: RNCC: 3 | RNVC: 2

3 May 2006

5340-12-387-0790
Bow Handle

123870790
S533M9030112: RNCC: 3 | RNVC: 2

3 Nov 2011

5340-12-349-9082
Double Angle Bracket

123499082
A1Z10283188: RNCC: 2 | RNVC: 2
A1Z10283188: RNCC: 3 | RNVC: 2
20360769: RNCC: 5 | RNVC: 2

24 Jan 2000

5340-12-351-2203
Angle Bracket

123512203
T311M3003205: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-12-041-0405

5340-12-180-6075
Antipilferage Seal

121806075
C381-A27-C180: RNCC: 2 | RNVC: 2
C381A27C180: RNCC: 3 | RNVC: 2
C381-A27-C180: RNCC: 5 | RNVC: 2
C381A27C180: RNCC: 5 | RNVC: 2
C381-A27-C180: RNCC: 5 | RNVC: 2

21 Sep 1979

5340-12-197-2050
Helical Compression Spring Seat

121972050
CSK966.07: RNCC: 3 | RNVC: 2
3290-886: RNCC: 5 | RNVC: 2
3290886: RNCC: 5 | RNVC: 2

29 Sep 1983

5340-12-305-1885
Retaining Strap

123051885
100332-11000.11: RNCC: 2 | RNVC: 2
100332-11000.11: RNCC: 3 | RNVC: 2
100332-11000-11: RNCC: 5 | RNVC: 9

4 Oct 1985

5340-12-312-4843
Detent Plunger

123124843
42491/0111-02: RNCC: 3 | RNVC: 2

12 Jan 1988

5340-12-386-5787
Pad Eye

123865787
82439000001: RNCC: 3 | RNVC: 2
82.43900-0001: RNCC: 5 | RNVC: 2

13 Sep 2011

5340-12-359-8246
Ball Socket Seat

123598246
11.11175-0011: RNCC: 3 | RNVC: 2
11.11175-0011: RNCC: 5 | RNVC: 2
11.11175-0011: RNCC: 5 | RNVC: 2

12 Mar 2003

5340-12-328-9260
Bow Handle

123289260
81970015063: RNCC: 3 | RNVC: 2
81.97001-5063: RNCC: 5 | RNVC: 2

1 Jul 1992

5340-12-343-3017
Rod End Clevis

123433017
5007-113: RNCC: 3 | RNVC: 2
F300 0T 022 4153: RNCC: 6 | RNVC: 9

3 Jun 1997

5340-12-352-2604
Mounting Plate

123522604
6700017-207100.02: RNCC: 2 | RNVC: 2
6700017-207100.02: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-12-389-0680
Expansion Shield

123890680
NO PRIMARY REF 12-389-0680: RNCC: 3 | RNVC: 2
924183: RNCC: 5 | RNVC: 2
2500601236: RNCC: 5 | RNVC: 2
924183: RNCC: 5 | RNVC: 2

23 May 2012

5340-12-305-1104
Angle Bracket

123051104
4900059-211101.001.0: RNCC: 3 | RNVC: 2
1220084: RNCC: 5 | RNVC: 2

27 Sep 1985

5340-12-393-4875
Manual Control Handle

123934875
GN125-36-M8-D: RNCC: 3 | RNVC: 2

18 Sep 2013

Load More Results