What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 114 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 114 of 178

5340-12-701-1672
Mounting Bracket

127011672
VG95211-ML-127011672: RNCC: 2 | RNVC: 2
5.12.0237.1355.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-333-9734
Loop Clamp

123339734
DIN3016-1-A1-44X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-A1-44X15-W1-2: RNCC: 3 | RNVC: 2
RS1.44/15-W1: RNCC: 3 | RNVC: 2
0745252075: RNCC: 5 | RNVC: 2
RS1.44/15: RNCC: 5 | RNVC: 2
RS1100.44/15: RNCC: 5 | RNVC: 2
DIN3016-A1-44X15-W1-2: RNCC: 5 | RNVC: 9
VG95931-A44X15-W1: RNCC: 5 | RNVC: 9

2 Mar 1994

5340-12-354-8526
Mounting Bracket

123548526
VG95211-ML-123548526: RNCC: 2 | RNVC: 2
P-876427-007: RNCC: 3 | RNVC: 2
P876427-007: RNCC: 5 | RNVC: 2

30 Aug 2001

5340-12-358-0600
Friction Catch

123580600
2500262-193020.000.0: RNCC: 2 | RNVC: 2
2500262-193020.000.0: RNCC: 3 | RNVC: 2

9 Sep 2002

5340-12-701-5864
Rod End Connector

127015864
VG95211-ML-127015864: RNCC: 2 | RNVC: 2
5.12.6500.0470.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-177-2771
Retaining Strap

121772771
81974015026: RNCC: 3 | RNVC: 2
81.97401.5026: RNCC: 5 | RNVC: 2
81.97401-5026: RNCC: 5 | RNVC: 2
23230-172490-000-0: RNCC: 5 | RNVC: 9
23230-172490.000.0: RNCC: 5 | RNVC: 9

24 Jan 1979

5340-12-702-6393
Retaining Strap

127026393
VG95211-ML-127026393: RNCC: 2 | RNVC: 2
84.7208.1270.6: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-374-1185
Mounting Plate

123741185
2500261-060010.000.0: RNCC: 2 | RNVC: 2
2500261-060010.000.0: RNCC: 3 | RNVC: 2

21 Jan 2008

5340-12-342-6184
Handle Grip

123426184
U100-3711-002: RNCC: 2 | RNVC: 2
U100-3711-002: RNCC: 3 | RNVC: 2

7 Mar 1997

5340-12-365-3941
Double Angle Bracket

123653941
5161-211110A02B: RNCC: 2 | RNVC: 2
5161-211110A02B: RNCC: 3 | RNVC: 2

28 Dec 2004

5340-12-166-9571
Mending Plate

121669571
66-3524-500-04A001: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-12-309-7455
Access Cover

123097455
70.1200.216-03: RNCC: 3 | RNVC: 2

23 Feb 1987

5340-12-701-8766
Retaining Band

127018766
VG95211-ML-127018766: RNCC: 2 | RNVC: 2
70 OST1 10065-71: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-354-8491
Strap Hinge Leaf

123548491
J52423172-003: RNCC: 3 | RNVC: 2

30 Aug 2001

5340-12-158-8307
Strap Fastener Loop

121588307
NO PRIMARY REF 12-158-8307: RNCC: 3 | RNVC: 2
113-09-10-03: RNCC: 5 | RNVC: 2
3220065: RNCC: 5 | RNVC: 2
56160: RNCC: 5 | RNVC: 2
02120E STAHL LACKIERT RAL6014: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-321-7000
Angle Bracket

123217000
C249-A29-B9: RNCC: 2 | RNVC: 2
C249-A29-B9: RNCC: 3 | RNVC: 2

18 Jun 1990

5340-12-353-4919
Loop Clamp

123534919
SPGU6011.100/30SK: RNCC: 3 | RNVC: 2
181 6011 100: RNCC: 5 | RNVC: 2

30 Mar 2001

5340-12-332-4841
Catch Strike

123324841
DIN3133-K30X107ZN8: RNCC: 2 | RNVC: 2
DIN3133-K30X107-ST-A4P: RNCC: 5 | RNVC: 2
DIN3133-K30X107ZN: RNCC: 5 | RNVC: 2

16 Aug 1993

5340-12-181-2625
Helical Compression Spring Seat

121812625
14007109: RNCC: 3 | RNVC: 2
617-030: RNCC: 5 | RNVC: 2
01271350: RNCC: 5 | RNVC: 2
1271350EY8751-28: RNCC: 5 | RNVC: 2
8751-28-605-42: RNCC: 5 | RNVC: 2
8751-28-605.42: RNCC: 5 | RNVC: 2

7 Nov 1979

5340-12-159-3234
Spring Tension Clip

121593234
1392151-070060: RNCC: 3 | RNVC: 2
279.454 058: RNCC: 5 | RNVC: 2
1392151-070060: RNCC: 5 | RNVC: 9
1392151-070060: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-326-6028
Mounting Bracket

123266028
4900346-030200.00: RNCC: 2 | RNVC: 2
4900346-030200.00: RNCC: 3 | RNVC: 2

11 Oct 1991

5340-12-154-2166
Nut And Bolt Locking Plate

121542166
100355-630000-04: RNCC: 2 | RNVC: 2
100355-630000-04: RNCC: 5 | RNVC: 2
100355-630000-04: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-011-5206

5340-12-366-7634
Mounting Bracket

123667634
504-122987.000: RNCC: 2 | RNVC: 2
504-122987.000: RNCC: 3 | RNVC: 2

6 Jun 2005

5340-12-361-2124
Angle Bracket

123612124
J92220301-003: RNCC: 3 | RNVC: 2

4 Sep 2003

5340-12-304-6369
Nonmetallic Bumper

123046369
NO PRIMARY REF 12-304-6369: RNCC: 3 | RNVC: 2
019 6731 101508: RNCC: 5 | RNVC: 9

7 Aug 1985

5340-12-701-2668
Mounting Bracket

127012668
VG95211-ML-127012668: RNCC: 2 | RNVC: 2
5.12.4805.0063.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-326-6010
Access Cover

123266010
30-99070-0019: RNCC: 3 | RNVC: 2

11 Oct 1991

5340-12-347-6026
Mounting Bracket

123476026
8854 130-161: RNCC: 3 | RNVC: 2

13 Jan 1999

5340-12-368-9968
Retaining Strap

123689968
FT621110-066: RNCC: 2 | RNVC: 2
FT621110-066: RNCC: 3 | RNVC: 2

11 May 2006

5340-12-311-0981
Sliding Stay

123110981
5801357-1700.23: RNCC: 3 | RNVC: 2
5801357-1700.23: RNCC: 5 | RNVC: 9

27 Jul 1987

5340-12-342-5935
Access Cover

123425935
367 223-01: RNCC: 3 | RNVC: 2
1100132: RNCC: 5 | RNVC: 2

4 Mar 1997

5340-12-366-4361
Mounting Bracket

123664361
105076: RNCC: 3 | RNVC: 2

25 Apr 2005

5340-12-330-3918
Casement Fastener

123303918
15 0004 300: RNCC: 2 | RNVC: 2
15 0004 300: RNCC: 3 | RNVC: 2

10 Dec 1992

5340-12-354-5097
Mending Plate

123545097
242888: RNCC: 3 | RNVC: 2
9401987: RNCC: 5 | RNVC: 2
E1056-1500-0101: RNCC: 5 | RNVC: 2

23 Jul 2001

5340-12-300-3772
Electrical-Mechanical Equipment Post

123003772
2500119-190000.02: RNCC: 2 | RNVC: 2
130512: RNCC: 3 | RNVC: 2
2500119-190000.02: RNCC: 3 | RNVC: 2

28 Jul 1984

5340-12-700-2747
Manual Control Handle

127002747
51-261186004: RNCC: 2 | RNVC: 2
770.53.6: RNCC: 3 | RNVC: 2
770-53-6: RNCC: 5 | RNVC: 9

26 Nov 1991

5340-12-701-7634
Blank Panel

127017634
VG95211-ML-127017634: RNCC: 2 | RNVC: 2
5.12.7701.3130.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-321-5620
Access Door

123215620
P-886710-406: RNCC: 3 | RNVC: 2
P886710-406: RNCC: 5 | RNVC: 2

1 Jun 1990

5340-12-185-4525
Dust And Moisture Seal Protective Plug

121854525
636390208502-0E: RNCC: 3 | RNVC: 2
C4157745: RNCC: 5 | RNVC: 2
C 4157 745: RNCC: 5 | RNVC: 2
C4157745: RNCC: 5 | RNVC: 2
C 4157 745: RNCC: 5 | RNVC: 2

7 Oct 1980

5340-12-148-9565
Loop Clamp

121489565
DIN3016-1-D2-8-12X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D2-8-12X15-W1-2: RNCC: 3 | RNVC: 2
RSGU1.8-12/15: RNCC: 3 | RNVC: 2
4219101008: RNCC: 5 | RNVC: 2
23176-207000-20-0: RNCC: 5 | RNVC: 2
RSGU1100.8-12/15: RNCC: 5 | RNVC: 2
DIN3016-D2-8-12X15-W1-2: RNCC: 5 | RNVC: 9
RSGU1100-8-12-15: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-197-7386
Mending Plate

121977386
A-920265-011: RNCC: 3 | RNVC: 2
A920265-011: RNCC: 5 | RNVC: 2

18 Nov 1983

5340-12-377-0494
Angle Bracket

123770494
5502030243: RNCC: 3 | RNVC: 2

9 Dec 2008

5340-12-306-0794
Mending Plate

123060794
P-243854-007: RNCC: 3 | RNVC: 2
P243854-007: RNCC: 5 | RNVC: 2

24 Jan 1986

5340-12-311-9915
Mending Plate

123119915
P-875896-001: RNCC: 3 | RNVC: 2
P875896-001: RNCC: 5 | RNVC: 2

9 Nov 1987

5340-12-302-9388
Loop Clamp

123029388
SPGU8167.148/20SKZ: RNCC: 3 | RNVC: 2
1206 7126: RNCC: 3 | RNVC: 2
1518167148: RNCC: 5 | RNVC: 2
12067126: RNCC: 5 | RNVC: 2
3.601.0.977.001.6: RNCC: 5 | RNVC: 2
3-601-0-977-001-6: RNCC: 5 | RNVC: 9
3.601.0.377.001.6: RNCC: 5 | RNVC: 9

11 Feb 1985

5340-12-312-5901
Mending Plate

123125901
615.06-05-00-00-010: RNCC: 3 | RNVC: 2

20 Jan 1988

5340-12-130-0108
Retaining Strap

121300108
DIN72573-1X10-ST-ZN: RNCC: 2 | RNVC: 2
DIN72573-1X10-ST-ZN: RNCC: 3 | RNVC: 2
DIN72573-1X10-ST: RNCC: 5 | RNVC: 9
27410 27213: RNCC: 5 | RNVC: 9
7D401-000-081PT15: RNCC: 5 | RNVC: 9
1X10DIN72573ST: RNCC: 5 | RNVC: 9
2741027213: RNCC: 5 | RNVC: 9
DIN72573-1X10-ST: RNCC: 5 | RNVC: 9
1X10DIN72573STR0H: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-315-6627
Mending Plate

123156627
512214-4204.000: RNCC: 3 | RNVC: 2
512214-4204: RNCC: 5 | RNVC: 2

18 Nov 1988

5340-12-325-8852
Webbing Strap

123258852
79017/026-0600-0250: RNCC: 3 | RNVC: 2
79017/026-0600-0250: RNCC: 5 | RNVC: 9

18 Jul 1991

5340-12-319-7797
Coat And Hat Hook

123197797
3818140301: RNCC: 3 | RNVC: 2

3 Nov 1989

5340-12-198-0328
Door Button

121980328
DIN81415-A-ST-F: RNCC: 2 | RNVC: 2
ADIN81415STGALZN3: RNCC: 5 | RNVC: 2

13 Dec 1983

5340-12-182-6482
Loop Clamp

121826482
X12-5-8: RNCC: 3 | RNVC: 2
6175201: RNCC: 5 | RNVC: 2

20 Feb 1980

5340-12-312-8756
Mounting Bracket

123128756
42466/0000-02: RNCC: 3 | RNVC: 2
42466000002: RNCC: 5 | RNVC: 2

16 Feb 1988

5340-12-373-2133
Dust And Moisture Seal Protective Plug

123732133
550/003: RNCC: 3 | RNVC: 2
GPN550-003: RNCC: 5 | RNVC: 2
GPN550/003: RNCC: 5 | RNVC: 2

10 Oct 2007

5340-12-382-2456
Mounting Bracket

123822456
2500171-121200.00: RNCC: 2 | RNVC: 2
2500171-121200.00: RNCC: 3 | RNVC: 2

27 May 2010

5340-12-319-7320
Mending Plate

123197320
6100125-11400.003: RNCC: 2 | RNVC: 2
4246012304: RNCC: 3 | RNVC: 2

30 Oct 1989

5340-12-308-6752
Clamp Bolt Assembly

123086752
PAN6624-01: RNCC: 3 | RNVC: 2

6 Nov 1986

5340-12-700-8520
Loop Clamp

127008520
VG95211-ML-127008520: RNCC: 2 | RNVC: 2
155N1119-343: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-364-2868
Angle Bracket

123642868
5374-123120A03B: RNCC: 2 | RNVC: 2
5374-123120A03B: RNCC: 3 | RNVC: 2

8 Sep 2004

5340-12-347-0075
Vent Plug

123470075
12-051 1IN: RNCC: 3 | RNVC: 2

12 Oct 1998

5340-12-187-9846
Electrical-Mechanical Equipment Post

121879846
5561598/3: RNCC: 3 | RNVC: 2
5561598-3: RNCC: 5 | RNVC: 9

25 May 1981

5340-12-314-3096
Mounting Bracket

123143096
P-856650-009: RNCC: 3 | RNVC: 2
P856650-009: RNCC: 5 | RNVC: 2

24 Jun 1988

5340-12-361-6356
Angle Bracket

123616356
957-114000-00-0: RNCC: 3 | RNVC: 2

28 Oct 2003

5340-12-313-3383
Access Cover

123133383
2300194-181521.000: RNCC: 3 | RNVC: 2
2300194-181521.000: RNCC: 5 | RNVC: 9
9843604: RNCC: 5 | RNVC: 9
2300194-181521.000: RNCC: 5 | RNVC: 9

23 Mar 1988

5340-12-340-9985
Access Cover

123409985
1113610004/2: RNCC: 3 | RNVC: 2
DRUCK NR.214,MAI 94 PN1.15: RNCC: 5 | RNVC: 2

16 Jul 1996

5340-12-161-9192
Expansion Plug

121619192
DIN443-25-ST-PHR: RNCC: 2 | RNVC: 2
0630361034: RNCC: 5 | RNVC: 2
1274250: RNCC: 5 | RNVC: 2
0630 361 034: RNCC: 5 | RNVC: 2
25DIN443PHR: RNCC: 5 | RNVC: 2
5000275800: RNCC: 5 | RNVC: 2
5000275800: RNCC: 5 | RNVC: 9
0630361034: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-356-9386
Mounting Bracket

123569386
4627652: RNCC: 3 | RNVC: 2
4627652: RNCC: 5 | RNVC: 2

18 Apr 2002

5340-12-325-4017
Retaining Band

123254017
SP18X0,8-W1-VERZINKT-50M-ROLLE: RNCC: 3 | RNVC: 2
SP18X8-W1-VERZINKT-50M-ROLLE: RNCC: 5 | RNVC: 9

3 Jun 1991

5340-12-198-7709
Extension Drawer Slide

121987709
036.14528: RNCC: 3 | RNVC: 2
4900075-4010.01: RNCC: 5 | RNVC: 2
556-820 4010.01: RNCC: 5 | RNVC: 2
102-798-3: RNCC: 5 | RNVC: 2
4900075-4010.01: RNCC: 5 | RNVC: 9
4900075-4010.01: RNCC: 5 | RNVC: 9

24 Feb 1984

5340-12-197-3954
Nonmetallic Bumper

121973954
64414010: RNCC: 3 | RNVC: 2
421-59-56-4: RNCC: 5 | RNVC: 2
421.59-56.4: RNCC: 5 | RNVC: 2
4414/010: RNCC: 5 | RNVC: 9

19 Oct 1983

5340-12-317-0105
Gummi- Riemen

123170105
328-186101.000: RNCC: 2 | RNVC: 2
328-186101.000: RNCC: 3 | RNVC: 2
328-186101.000: RNCC: 5 | RNVC: 9
9841027: RNCC: 5 | RNVC: 9

3 Mar 1989

5340-12-174-4096
Clamping Catch

121744096
7882702: RNCC: 3 | RNVC: 2
7882-702: RNCC: 5 | RNVC: 2
1000025-851200: RNCC: 5 | RNVC: 9

29 Jun 1978

5340-12-326-6887
Access Cover

123266887
1300839-010063: RNCC: 2 | RNVC: 2
279.613 609: RNCC: 3 | RNVC: 2
279.613609: RNCC: 5 | RNVC: 2
TM1.5200.202.40: RNCC: 5 | RNVC: 2

22 Oct 1991

5340-12-310-1447
Angle Bracket

123101447
2500179-194100.018.0: RNCC: 2 | RNVC: 2
2500179-194100.018.0: RNCC: 3 | RNVC: 2

10 Apr 1987

5340-12-131-5625
Turnbuckle

121315625
DIN82004-C2-VERZINKT: RNCC: 2 | RNVC: 2
DIN82004-C2-ZN: RNCC: 3 | RNVC: 2
6510024V: RNCC: 5 | RNVC: 2
C2DIN82004VERZINKT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-308-7912
Angle Bracket

123087912
1281-16700.10: RNCC: 2 | RNVC: 2
159556: RNCC: 3 | RNVC: 2
1281-16700.10: RNCC: 5 | RNVC: 2

18 Nov 1986

5340-12-352-5079
Clamping Catch

123525079
GN843-310-ASW: RNCC: 3 | RNVC: 2

23 Nov 2000

5340-12-317-0753
Loop Clamp

123170753
234-10300: RNCC: 3 | RNVC: 2

9 Mar 1989

5340-12-181-9581
Electrical-Mechanical Equipment Post

121819581
4705892: RNCC: 3 | RNVC: 2
5801718-500000.001: RNCC: 5 | RNVC: 9
5801718-500000-001: RNCC: 5 | RNVC: 9

28 Dec 1979

5340-12-313-0646
Lock-Release Lever

123130646
AS400-28-3B: RNCC: 3 | RNVC: 2

2 Mar 1988

5340-12-386-0932
Expansion Shield

123860932
NO PRIMARY REF 12-386-0932: RNCC: 3 | RNVC: 2
050238: RNCC: 5 | RNVC: 2
O50238: RNCC: 5 | RNVC: 2
2500602435: RNCC: 5 | RNVC: 2

8 Aug 2011

5340-12-302-0447
Dust And Moisture Seal Protective Plug

123020447
536116-0006.: RNCC: 3 | RNVC: 2
536116-0006.000: RNCC: 3 | RNVC: 2
536116-0006: RNCC: 3 | RNVC: 2
536116-0006: RNCC: 5 | RNVC: 2
536116-0006: RNCC: 5 | RNVC: 9
536116-0006.000: RNCC: 5 | RNVC: 9

29 Nov 1984

5340-12-168-2439
Dust And Moisture Seal Protective Cap

121682439
E4-2004850: RNCC: 3 | RNVC: 2
E4-2004850: RNCC: 5 | RNVC: 9

28 Feb 1977

5340-12-199-0306
Mending Plate

121990306
5801549-2110.013: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-12-309-8218
Access Cover

123098218
AJ250S4Y13-23: RNCC: 3 | RNVC: 9
3302987: RNCC: 5 | RNVC: 9

6 Mar 1987

5340-12-317-4535
Clamping Catch

123174535
2922-125X50MM MS: RNCC: 3 | RNVC: 2

10 Apr 1989

5340-12-306-7250
Dust And Moisture Seal Protective Cap

123067250
2000556056: RNCC: 3 | RNVC: 2
0130 8151: RNCC: 5 | RNVC: 2
01308151EY8776-22: RNCC: 5 | RNVC: 2
91694398: RNCC: 5 | RNVC: 2
5000808052: RNCC: 5 | RNVC: 2

24 Mar 1986

5340-12-390-8174
Rail Gui Connector

123908174
510003-10: RNCC: 3 | RNVC: 2
7116912: RNCC: 5 | RNVC: 2

14 Dec 2012

5340-12-170-2476
Retaining Strap

121702476
06671500109: RNCC: 3 | RNVC: 2
06.67150-0109: RNCC: 5 | RNVC: 2
22MAN217: RNCC: 5 | RNVC: 2

5 Jul 1977

5340-12-179-1791
Platte

121791791
5800828-13424-011: RNCC: 3 | RNVC: 2
5800828-13424.011: RNCC: 5 | RNVC: 2

15 Jun 1979

5340-12-182-0000
Dust And Moisture Seal Protective Plug

121820000
5478025: RNCC: 3 | RNVC: 2
5801718-000000-002: RNCC: 5 | RNVC: 9
5801718-000000.002: RNCC: 5 | RNVC: 9

4 Jan 1980

5340-12-307-5083
Spacing Threaded Standoff

123075083
PAN5170-08-115: RNCC: 3 | RNVC: 2

25 Jun 1986

5340-12-308-9187
Electrical-Mechanical Equipment Post

123089187
VG95148C8XM3X30-NRST-PASSIVIERT: RNCC: 2 | RNVC: 2
351271312291: RNCC: 3 | RNVC: 2
VG95148C8XM3X30-NRST-PASSIVIERT: RNCC: 3 | RNVC: 2

27 Nov 1986

5340-12-167-8588
Resilient Mount

121678588
791000-590635: RNCC: 3 | RNVC: 2
E9A1335: RNCC: 5 | RNVC: 2
791000-590635: RNCC: 5 | RNVC: 2

26 Jan 1977

5340-12-151-5005
Clamping Catch

121515005
DIN3134-D55-G15X17ZN8: RNCC: 2 | RNVC: 2
DIN3134-AK55-GALZN9: RNCC: 5 | RNVC: 2
AK55DIN3134GALZN9: RNCC: 5 | RNVC: 2
DIN3134-D55-G15X17-ZN8: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-334-6961
Spring Tension Clip

123346961
DIN71805-S16-A3C: RNCC: 2 | RNVC: 2
DIN71805-S16-ZN: RNCC: 5 | RNVC: 2
06.36127-4404: RNCC: 5 | RNVC: 2
071805016404: RNCC: 5 | RNVC: 2
DIN71805-S16-A3P: RNCC: 5 | RNVC: 2
06361274404: RNCC: 5 | RNVC: 2
DIN71805-S16VERZINKT: RNCC: 5 | RNVC: 2

9 Jun 1994

5340-12-182-0889
Loop Clamp

121820889
2211428803: RNCC: 3 | RNVC: 2
5801506-7024-004: RNCC: 5 | RNVC: 2
5801506-7024-004: RNCC: 5 | RNVC: 9
22114 28803: RNCC: 5 | RNVC: 9

14 Jan 1980

5340-12-335-3440
Runner

123353440
6700018-201242.00: RNCC: 2 | RNVC: 2
6700018-201242.00: RNCC: 3 | RNVC: 2

11 Aug 1994

5340-12-328-3563
Plug Button

123283563
R50964: RNCC: 3 | RNVC: 2
4063-096: RNCC: 3 | RNVC: 2
R50964: RNCC: 5 | RNVC: 9
42094-080.09: RNCC: 5 | RNVC: 9

8 May 1992

5340-12-343-0941
Rod End Connector

123430941
5092-331: RNCC: 3 | RNVC: 2

28 Apr 1997

5340-12-186-5403
Spring Tension Clip

121865403
9KB 125 719-00: RNCC: 3 | RNVC: 2
125719-00: RNCC: 5 | RNVC: 2
0008264184: RNCC: 5 | RNVC: 2
0008265884: RNCC: 5 | RNVC: 2
02980965: RNCC: 5 | RNVC: 2
2980965EY5022-80: RNCC: 5 | RNVC: 2
125719-00: RNCC: 5 | RNVC: 2
9KB114512-00: RNCC: 5 | RNVC: 2
9KB125719-00: RNCC: 5 | RNVC: 2
9KB 125 719-00: RNCC: 5 | RNVC: 9

14 Jan 1981

5340-12-370-7901
Access Door Hinge

123707901
450308: RNCC: 3 | RNVC: 2

21 Dec 2006

5340-12-163-2850
Loop Clamp

121632850
2203928102: RNCC: 3 | RNVC: 2
0009953135: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-177-0883
Nonmetallic Bumper

121770883
183885375: RNCC: 3 | RNVC: 2

15 Jan 1979

5340-12-319-4599
Mending Plate

123194599
503724: RNCC: 3 | RNVC: 2

4 Oct 1989

5340-12-366-2967
Manual Control Lever

123662967
105077: RNCC: 3 | RNVC: 2

6 Apr 2005

5340-12-307-5537
Helical Compression Spring Retainer

123075537
1270.1,8.0.415: RNCC: 3 | RNVC: 2

2 Jul 1986

5340-12-321-2498
Mending Plate

123212498
2300269-971000.001.0: RNCC: 2 | RNVC: 2
790-45.11.111-25: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-12-347-5849
Retaining Strap

123475849
2500238-070412.000.0: RNCC: 2 | RNVC: 2
2500238-070412.000.0: RNCC: 3 | RNVC: 2

11 Jan 1999

5340-12-147-9402

5340-12-393-4987
Mounting Bracket

123934987
4375211540: RNCC: 3 | RNVC: 2

19 Sep 2013

5340-12-386-5631
Access Cover

123865631
5241880702: RNCC: 3 | RNVC: 2

12 Sep 2011

5340-12-333-2243
Double Angle Bracket

123332243
81429025183: RNCC: 2 | RNVC: 2
81429025183: RNCC: 3 | RNVC: 2
81.42902.5183: RNCC: 5 | RNVC: 2

11 Nov 1993

5340-12-355-1420
Dust And Moisture Seal Protective Plug

123551420
4609970235: RNCC: 3 | RNVC: 2

15 Oct 2001

5340-12-354-8308
Mounting Plate

123548308
5400049-621030.03: RNCC: 2 | RNVC: 2
5400049-621030.03: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-191-5512
Nonmetallic Bumper

121915512
FORM2140: RNCC: 3 | RNVC: 2
2140: RNCC: 5 | RNVC: 2
17.8761.0601: RNCC: 5 | RNVC: 9

10 Feb 1982

5340-12-384-8036
Helical Compression Spring Seat

123848036
F1.1189-40-10-10.00-08: RNCC: 3 | RNVC: 2

30 Mar 2011

5340-12-300-5229
Helical Compression Spring Seat

123005229
E4-2013461: RNCC: 3 | RNVC: 2
E4-2013461: RNCC: 5 | RNVC: 9
E4-2013461: RNCC: 5 | RNVC: 9

9 Aug 1984

5340-12-136-2132
Nonmetallic Bumper

121362132
837-81.96020.0004-PUR60: RNCC: 3 | RNVC: 2
00.03361-6027: RNCC: 5 | RNVC: 2
00033616027: RNCC: 5 | RNVC: 2
70.03361-6027: RNCC: 5 | RNVC: 2
70033616027: RNCC: 5 | RNVC: 2
81960200004: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-700-8683
Loop Clamp

127008683
VG95211-ML-127008683: RNCC: 2 | RNVC: 2
155N464-274: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-164-3279
Friction Catch Stud Receptacle

121643279
923-0168-000: RNCC: 3 | RNVC: 2
238-008211-01: RNCC: 5 | RNVC: 2
N92214W1: RNCC: 5 | RNVC: 2
01242081: RNCC: 5 | RNVC: 2
1242081EE8935-38: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-124-1228
Retaining Strap

121241228
DIN72571-1X18-AL: RNCC: 2 | RNVC: 2
DIN72571-1X18-AL: RNCC: 3 | RNVC: 2
1X18DIN72571AL: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-168-1145
Friction Catch Stud

121681145
WW410004C: RNCC: 3 | RNVC: 2
WW410004C: RNCC: 5 | RNVC: 2
WW410004C: RNCC: 5 | RNVC: 2
WW 410 004 C: RNCC: 5 | RNVC: 2

18 Feb 1977

5340-12-383-3383
Access Cover

123833383
107W186600.003.0: RNCC: 2 | RNVC: 2
107W186600.003.0: RNCC: 3 | RNVC: 2

7 Oct 2010

5340-12-393-5569
Mounting Plate

123935569
4100098-414110.000.0: RNCC: 2 | RNVC: 2
4100098-414110.000.0: RNCC: 3 | RNVC: 2

24 Sep 2013

5340-12-393-5661
Mounting Bracket

123935661
4100098-722010.006.0: RNCC: 2 | RNVC: 2
4100098-722010.006.0: RNCC: 3 | RNVC: 2

25 Sep 2013

5340-12-373-9051
Mounting Plate

123739051
2500267-322500.06.0: RNCC: 3 | RNVC: 2

18 Dec 2007

5340-12-377-4325
Retaining Strap

123774325
8699950006: RNCC: 3 | RNVC: 2

15 Jan 2009

5340-12-382-3440
Catch Strike

123823440
34FF-02135F91: RNCC: 3 | RNVC: 2

8 Jun 2010

5340-12-351-6125
Retaining Strap

123516125
JN0242F20: RNCC: 3 | RNVC: 2

8 Aug 2000

5340-12-197-4973
Plug Button

121974973
2300061-183200.003: RNCC: 2 | RNVC: 2
2300061-183200.003: RNCC: 3 | RNVC: 2
2300061-183200.003: RNCC: 5 | RNVC: 9
2300061-183200-003: RNCC: 5 | RNVC: 9

26 Oct 1983

5340-12-162-8730
Mending Plate

121628730
100343-1410-01: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-194-1605
Plain Solid Disk

121941605
K6328: RNCC: 3 | RNVC: 2
ST12728-1100POS.25: RNCC: 5 | RNVC: 2
K6328: RNCC: 5 | RNVC: 9
ST12728-1100POS.25: RNCC: 5 | RNVC: 9

7 Oct 1982

5340-12-186-9617
Electrical-Mechanical Equipment Post

121869617
5802206-151000-003: RNCC: 2 | RNVC: 2
535.7435: RNCC: 3 | RNVC: 2
5357435: RNCC: 5 | RNVC: 2

23 Feb 1981

5340-12-365-5787
Angle Bracket

123655787
J28730002-405: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-366-0756
Dust And Moisture Seal Protective Cap

123660756
250/20RAL3000: RNCC: 3 | RNVC: 2

7 Mar 2005

5340-12-165-3251
Plain Solid Disk

121653251
307.161-50260.01: RNCC: 3 | RNVC: 2
307-161-50260-01: RNCC: 3 | RNVC: 2
0307161-50260-01: RNCC: 5 | RNVC: 9

9 Apr 1976

5340-12-357-9151
Mounting Bracket

123579151
2300042-255406.000: RNCC: 2 | RNVC: 2
2300042-255406.000: RNCC: 3 | RNVC: 2

14 Aug 2002

5340-12-371-2988
Mounting Plate

123712988
8350-0257: RNCC: 2 | RNVC: 2
8350-0257: RNCC: 3 | RNVC: 2

12 Mar 2007

5340-12-337-0829
Clamping Catch

123370829
81669016004: RNCC: 3 | RNVC: 2
VG95136B4-53,5X30A4C-LACKRAL6031: RNCC: 5 | RNVC: 2
81.66901.6004: RNCC: 5 | RNVC: 2

18 Jan 1995

5340-12-194-4099
Metal Runner

121944099
66.3851.105.03-A001: RNCC: 3 | RNVC: 2
161362: RNCC: 5 | RNVC: 2
66-3851-105-03A001: RNCC: 5 | RNVC: 9

3 Nov 1982

5340-12-191-4273
Pad Eye

121914273
D3674-0101-0001: RNCC: 3 | RNVC: 2
D3674-0101-0001: RNCC: 5 | RNVC: 9

2 Feb 1982

5340-12-306-6205
Angle Bracket

123066205
0216 6475: RNCC: 3 | RNVC: 2
216.6475: RNCC: 5 | RNVC: 2
216-6475: RNCC: 5 | RNVC: 9

14 Mar 1986

5340-12-370-9713
Loop Clamp

123709713
81974200156: RNCC: 3 | RNVC: 2
81.97420-0156: RNCC: 5 | RNVC: 2
81.97420.0156: RNCC: 5 | RNVC: 2

23 Jan 2007

5340-12-182-3980
Retaining Strap

121823980
1200037-1-037: RNCC: 3 | RNVC: 2
1200037-1.037: RNCC: 5 | RNVC: 2
1200037-1-037: RNCC: 5 | RNVC: 9

30 Jan 1980

5340-12-198-0546
Antipilferage Seal

121980546
VG95560A10X4: RNCC: 2 | RNVC: 2
5-112-0039: RNCC: 3 | RNVC: 2
VG95560-A10X4: RNCC: 5 | RNVC: 2

15 Dec 1983

5340-12-188-3577
Recess Handle

121883577
868-18233-8: RNCC: 3 | RNVC: 2
81626410064: RNCC: 5 | RNVC: 2

2 Jul 1981

5340-12-354-3453
Friction Catch

123543453
2500262-191720.000.0: RNCC: 2 | RNVC: 2
2500262-191720.000.0: RNCC: 3 | RNVC: 2

4 Jul 2001

5340-12-356-6366
Angle Bracket

123566366
523-060204.00.0: RNCC: 3 | RNVC: 2

19 Mar 2002

5340-12-315-0784
Swivel Caster

123150784
LS-SETH 200K: RNCC: 3 | RNVC: 2
730016: RNCC: 5 | RNVC: 2
SL-SE-TH200P-V: RNCC: 5 | RNVC: 9

14 Sep 1988

5340-12-360-0369
Mounting Bracket

123600369
2500261-187076.000.0: RNCC: 2 | RNVC: 2
2500261-187076.000.0: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-702-1837
Mounting Bracket

127021837
VG95211-ML-127021837: RNCC: 2 | RNVC: 2
30.7206.1100.2: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-330-9097
Access Door

123309097
2300264-202000.05.0: RNCC: 3 | RNVC: 2

24 Feb 1993

5340-12-386-2554
Door Button

123862554
DIN81415-A-A4-70: RNCC: 2 | RNVC: 2

18 Aug 2011

5340-12-199-6641
Webbing Strap

121996641
01811-2-01204-FE500MM-LE8500MM: RNCC: 3 | RNVC: 2
01811-2 9METER UND 2X01204: RNCC: 5 | RNVC: 2
01811-2-01204-500/8500: RNCC: 5 | RNVC: 2
01811-2-01204-9000: RNCC: 5 | RNVC: 2
1811/2-9MR+2X01204: RNCC: 5 | RNVC: 2
01811-2-11361 9METER UND 2X01204: RNCC: 5 | RNVC: 2
79056/044-9000-500: RNCC: 5 | RNVC: 9
DIN60060-2-50X500X8500-C1/D3: RNCC: 5 | RNVC: 9

19 May 1984

5340-12-142-9881
Riegel

121429881
F12FX0,6X1,2DOLN104: RNCC: 3 | RNVC: 2
F12FX0,6X1,2DOLN104: RNCC: 5 | RNVC: 2
F12FX0,6X1,2: RNCC: 5 | RNVC: 2
F12FX0-6X1-2: RNCC: 5 | RNVC: 2
F12FX0-6X1-2: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-357-5342
Handle Grip

123575342
2500255-190005.000.0: RNCC: 2 | RNVC: 2
2500255-190005.000.0: RNCC: 3 | RNVC: 2

28 Jun 2002

5340-12-358-3154
Mounting Bracket

123583154
2500262-192400.004.0: RNCC: 2 | RNVC: 2
2500262-192400.004.0: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-12-164-4615
Loop Clamp

121644615
DIN3016-2-G1-98X25-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-98X25-W1-2: RNCC: 3 | RNVC: 2
SP98/25SK: RNCC: 3 | RNVC: 2
1610000098: RNCC: 5 | RNVC: 2
SP98-25SK: RNCC: 5 | RNVC: 2
DIN3016-G1-98X25-W1-2: RNCC: 5 | RNVC: 9
VG95931-G98X25-W1: RNCC: 5 | RNVC: 9
VG95931G98X25W1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-322-8802
Manual Control Handle

123228802
704-110280-901-3: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-12-302-6544
Nonmetallic Bumper

123026544
1-2651-10-4: RNCC: 2 | RNVC: 2
1-2651-10-4: RNCC: 3 | RNVC: 2

21 Jan 1985

5340-12-386-1251
Mounting Plate

123861251
2500261-189107.001.0: RNCC: 3 | RNVC: 2

10 Aug 2011

5340-12-190-1898
Electrical-Mechanical Equipment Post

121901898
35 865-001: RNCC: 3 | RNVC: 2
35865-001: RNCC: 5 | RNVC: 2

10 Nov 1981

5340-12-305-1121
Angle Bracket

123051121
4900059-121253.002.0: RNCC: 3 | RNVC: 2
1226970: RNCC: 5 | RNVC: 2

27 Sep 1985

5340-12-190-7202
Mounting Bracket

121907202
NO PRIMARY REF 12-190-7202: RNCC: 3 | RNVC: 2
7631 137286: RNCC: 5 | RNVC: 9
7631137286: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-701-6778
Mounting Bracket

127016778
VG95211-ML-127016778: RNCC: 2 | RNVC: 2
5.12.7211.8500.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-171-1865
Resilient Mount

121711865
81415016017: RNCC: 3 | RNVC: 2
81.41501.6017: RNCC: 5 | RNVC: 2
23250-014601-000-0: RNCC: 5 | RNVC: 9
23250-014601.000.0: RNCC: 5 | RNVC: 9

16 Sep 1977

5340-12-154-3518
Resilient Mount

121543518
R-ZBD82401.CR60.STZN: RNCC: 3 | RNVC: 2
KM975/00B4: RNCC: 3 | RNVC: 9
0660638: RNCC: 5 | RNVC: 2
ZBD82401: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-702-5496
Loop Clamp

127025496
VG95211-ML-127025496: RNCC: 2 | RNVC: 2
5.51.7213.0004.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-314-7547
Dust And Moisture Seal Protective Cap

123147547
DE-59-20: RNCC: 3 | RNVC: 2
C334-Z17-C421: RNCC: 5 | RNVC: 2

6 Aug 1988

5340-12-700-5577
Retaining Strap

127005577
VG95211-ML-127005577: RNCC: 2 | RNVC: 2
5148A-8: RNCC: 3 | RNVC: 2
0500840033969: RNCC: 5 | RNVC: 2

24 Sep 1992

5340-12-701-7929
Mounting Bracket

127017929
VG95211-ML-127017929: RNCC: 2 | RNVC: 2
5.12.8101.2111.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-380-7281
Loop Clamp

123807281
322/22PP GD AS M W2: RNCC: 3 | RNVC: 2
21242: RNCC: 5 | RNVC: 2
81.97445-6029: RNCC: 5 | RNVC: 2

24 Nov 2009

5340-12-149-0482
Manual Control Handle

121490482
DIN99-N100: RNCC: 2 | RNVC: 2
DIN99-N100-ST: RNCC: 2 | RNVC: 2
E16XM12DIN99: RNCC: 5 | RNVC: 2
N100DIN99: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-190-5774
Butt Hinge

121905774
5801435-040213.00: RNCC: 3 | RNVC: 2
5801435-040213-00: RNCC: 5 | RNVC: 2

7 Dec 1981

5340-12-183-9346
Mounting Plate

121839346
5800166-25.02: RNCC: 2 | RNVC: 2
5800166-25.02: RNCC: 3 | RNVC: 2
5800166-25-02: RNCC: 5 | RNVC: 9
5800166-25-02: RNCC: 5 | RNVC: 9

3 Jun 1980

5340-12-337-7237
Loop Clamp

123377237
20965: RNCC: 3 | RNVC: 2
20965A: RNCC: 5 | RNVC: 2
E1011-2419-0101: RNCC: 5 | RNVC: 2
0049976890: RNCC: 5 | RNVC: 2
1011-2419-0101: RNCC: 5 | RNVC: 2

4 Apr 1995

5340-12-190-3071
Angle Bracket

121903071
12729-12000.009: RNCC: 2 | RNVC: 2
150209: RNCC: 3 | RNVC: 2
12729-12000.009: RNCC: 5 | RNVC: 2
12729-12000-009: RNCC: 5 | RNVC: 9
12729-12000.009: RNCC: 5 | RNVC: 9

19 Nov 1981

5340-12-335-0183
Mending Plate

123350183
289G-00-T2A: RNCC: 3 | RNVC: 2

12 Jul 1994

5340-12-702-1620
Mounting Bracket

127021620
VG95211-ML-127021620: RNCC: 2 | RNVC: 2
30.6461.40: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-309-2374
Bow Handle

123092374
80002566: RNCC: 3 | RNVC: 2
80002566EZ5511-29: RNCC: 5 | RNVC: 2

30 Dec 1986

5340-12-189-0849
Access Cover

121890849
009-078.930-007: RNCC: 3 | RNVC: 2
009-078-930-007: RNCC: 5 | RNVC: 2
009-078-930-007: RNCC: 5 | RNVC: 9
009-078.930-007: RNCC: 5 | RNVC: 9

26 Aug 1981

5340-12-332-7995
Angle Bracket

123327995
10110929: RNCC: 3 | RNVC: 2
10110929: RNCC: 5 | RNVC: 2
512222-1100.000: RNCC: 5 | RNVC: 9
512222-1100: RNCC: 5 | RNVC: 9

21 Sep 1993

5340-12-195-6013
Nonmetallic Bumper

121956013
1264-2311.227: RNCC: 2 | RNVC: 2
531139-0645.000: RNCC: 3 | RNVC: 2
1264-2311.227: RNCC: 3 | RNVC: 2
1264-2311-227: RNCC: 3 | RNVC: 2
1264-2311-227: RNCC: 5 | RNVC: 9
1264-2311.227: RNCC: 5 | RNVC: 9
531139-0645.000: RNCC: 5 | RNVC: 9

16 Mar 1983

5340-12-301-7982
Spring Tension Clip

123017982
9KB 122 462-00: RNCC: 3 | RNVC: 2
122462-00: RNCC: 5 | RNVC: 2
0008265784: RNCC: 5 | RNVC: 2
122462-00: RNCC: 5 | RNVC: 9
9KB122462-00: RNCC: 5 | RNVC: 9

10 Nov 1984

5340-12-329-7102
Loop Clamp

123297102
R317: RNCC: 3 | RNVC: 2
51.97401-6036: RNCC: 5 | RNVC: 2
R0470: RNCC: 5 | RNVC: 2
51974016036: RNCC: 5 | RNVC: 2
R0470C: RNCC: 5 | RNVC: 9

22 Sep 1992

5340-12-354-3992
Section Block Clamp

123543992
J29120265-001: RNCC: 3 | RNVC: 2

9 Jul 2001

5340-12-199-5338
Nonmetallic Bumper

121995338
2500057-505000.02: RNCC: 2 | RNVC: 2
2500057-505000.02: RNCC: 3 | RNVC: 2
2500057-505000.02: RNCC: 3 | RNVC: 2
2500057-505000.02: RNCC: 3 | RNVC: 2
2500057-505000.02: RNCC: 3 | RNVC: 2
PLATTE 222X45X3-CR75: RNCC: 5 | RNVC: 2
2500057-505000.02: RNCC: 5 | RNVC: 9
2500057-505000-02: RNCC: 5 | RNVC: 9

9 May 1984

5340-12-315-5796
Angle Bracket

123155796
512214-2400.000: RNCC: 3 | RNVC: 2
512214-2400: RNCC: 5 | RNVC: 2

10 Nov 1988

5340-12-163-6714
Handwheel

121636714
VG85089-A-80X8-GT: RNCC: 2 | RNVC: 2
VG85089-A-80X8-GT: RNCC: 3 | RNVC: 2
VG85089-A-80X8-GT: RNCC: 3 | RNVC: 2
VG85089-A-80X8-GT: RNCC: 3 | RNVC: 9
A80X8VG85089GTW40: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-364-3935
Mounting Plate

123643935
598101-189200.001.0: RNCC: 3 | RNVC: 2

18 Sep 2004

5340-12-171-2541
Electrical-Mechanical Equipment Post

121712541
81629410029: RNCC: 3 | RNVC: 2
81.62941-0029: RNCC: 5 | RNVC: 2
23230-172450-002-0: RNCC: 5 | RNVC: 9
23230-172450.002.0: RNCC: 5 | RNVC: 9

21 Sep 1977

5340-12-313-2259
Detent Plunger

123132259
2500167-161000.01: RNCC: 2 | RNVC: 2
2500167-161000.01: RNCC: 3 | RNVC: 2
2500167-161000.01: RNCC: 5 | RNVC: 9

11 Mar 1988

5340-12-379-6703
Butt Hinge

123796703
DIN7956-32X1,25-15-ST-BK-U: RNCC: 2 | RNVC: 2

20 Aug 2009

5340-12-320-0875
Plain Solid Disk

123200875
42346030: RNCC: 3 | RNVC: 2
42346030EZ5544-29: RNCC: 5 | RNVC: 2

6 Dec 1989

5340-12-301-8879
Mounting Bracket

123018879
20-5220-087: RNCC: 3 | RNVC: 2

15 Nov 1984

5340-12-320-0199
Manual Control Handle

123200199
20808-060: RNCC: 3 | RNVC: 2

28 Nov 1989

5340-12-361-3697
Mounting Bracket

123613697
51974800828: RNCC: 3 | RNVC: 2
51.97480-0828: RNCC: 5 | RNVC: 2

19 Sep 2003

5340-12-155-5001
Butt Hinge Leaf

121555001
160-72754-03: RNCC: 3 | RNVC: 2
160-72754-03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-391-8737
Casement Fastener

123918737
1000-U755-01: RNCC: 3 | RNVC: 2
MV10-01-11-00-00: RNCC: 5 | RNVC: 2
1000-U755-01: RNCC: 5 | RNVC: 2

15 Apr 2013

5340-12-700-2089
Hinge Torsion Bar

127002089
51-261015010: RNCC: 2 | RNVC: 2
765-50-1352: RNCC: 3 | RNVC: 2

6 Nov 1991

5340-12-363-2317
Mounting Plate

123632317
GSTR99-00-100000.04: RNCC: 3 | RNVC: 2

14 May 2004

5340-12-356-5320
Retaining Strap

123565320
11.43486-0637: RNCC: 3 | RNVC: 2
11.43400-0850POS088: RNCC: 5 | RNVC: 2

8 Mar 2002

5340-12-360-1396
Access Hole Frame

123601396
J92220533-403: RNCC: 3 | RNVC: 2

10 Apr 2003

5340-12-180-5705
Angle Bracket

121805705
C381-A28-C77: RNCC: 2 | RNVC: 2
C381A28C77: RNCC: 3 | RNVC: 2
C381-A28-C77: RNCC: 5 | RNVC: 2
C381A28C77: RNCC: 5 | RNVC: 2
C381-A28-C77: RNCC: 5 | RNVC: 2

19 Sep 1979

5340-12-155-4551
Butt Hinge Leaf

121554551
160-74622-43: RNCC: 3 | RNVC: 2
160-74622-43: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-188-7734
Angle Bracket

121887734
5800261-800.02: RNCC: 2 | RNVC: 2
5800261-800.02: RNCC: 3 | RNVC: 2
5800261-800.02: RNCC: 3 | RNVC: 2
5800261-800-02: RNCC: 5 | RNVC: 2
5800261-800.02: RNCC: 5 | RNVC: 9
5800261-800.02: RNCC: 5 | RNVC: 9

29 Jul 1981

5340-12-172-6673
Door Button

121726673
1224-204.19: RNCC: 2 | RNVC: 2
532008-0438.000: RNCC: 3 | RNVC: 2
532008-438: RNCC: 3 | RNVC: 2
532008-0438.000: RNCC: 5 | RNVC: 2
532008-438: RNCC: 5 | RNVC: 2
1224-204-19: RNCC: 5 | RNVC: 9
1224-204.19: RNCC: 5 | RNVC: 9

8 Feb 1978

5340-12-168-6330
Mending Plate

121686330
1100204: RNCC: 3 | RNVC: 2
6065: RNCC: 5 | RNVC: 2

23 Mar 1977

5340-12-337-6443
Dust And Moisture Seal Protective Plug

123376443
25H730: RNCC: 3 | RNVC: 2
090022143: RNCC: 5 | RNVC: 2

22 Mar 1995

5340-12-022-6992

5340-12-355-4880
Dust And Moisture Seal Protective Cap-Plug

123554880
0019978686: RNCC: 3 | RNVC: 2

20 Nov 2001

5340-12-331-6885
Mounting Bracket

123316885
480-7397-26-20-00: RNCC: 3 | RNVC: 2
480/7397-26-20-00: RNCC: 5 | RNVC: 2

8 Jun 1993

5340-12-198-1499
Catch Strike

121981499
530336-0051.000: RNCC: 3 | RNVC: 2
530336.0051.000: RNCC: 5 | RNVC: 9
530336-0051: RNCC: 5 | RNVC: 9
530336-0051.000: RNCC: 5 | RNVC: 9
530336-0051: RNCC: 5 | RNVC: 9

27 Dec 1983

5340-12-701-9205
Loop Clamp

127019205
VG95211-ML-127019205: RNCC: 2 | RNVC: 2
TK-4-6-25-KD 24 GOST 17679-72: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-339-2084
Nut And Bolt Retainer

123392084
320308-01: RNCC: 3 | RNVC: 2
1100109: RNCC: 5 | RNVC: 2

25 Oct 1995

5340-12-384-5247
Mounting Bracket

123845247
F1.1289-37-05-00.00-03: RNCC: 3 | RNVC: 2

2 Mar 2011

5340-12-345-2778
Mounting Plate

123452778
1602-206000.002.0: RNCC: 2 | RNVC: 2
1602-206000.002.0: RNCC: 3 | RNVC: 2

24 Feb 1998

5340-12-393-0219
Mounting Bracket

123930219
1030124-620350.000.0: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-12-381-7786
Mounting Plate

123817786
1690-513100.003.0: RNCC: 3 | RNVC: 2

30 Mar 2010

5340-12-369-0868
Angle Bracket

123690868
7803221105AA: RNCC: 3 | RNVC: 2
1030010-721000.005.0: RNCC: 5 | RNVC: 2

19 May 2006

5340-12-379-6142
Swivel Caster

123796142
L-RD100R-ST: RNCC: 3 | RNVC: 2
L-RD100R-ST: RNCC: 5 | RNVC: 2

17 Aug 2009

5340-12-303-8171
Turnbuckle Body

123038171
076013: RNCC: 3 | RNVC: 2
AF5659/D ITEM 19: RNCC: 5 | RNVC: 2

6 May 1985

5340-12-123-2638
Retaining Strap

121232638
0216 6736: RNCC: 3 | RNVC: 2
0333 8163: RNCC: 5 | RNVC: 2
2166736: RNCC: 5 | RNVC: 2
3338163: RNCC: 5 | RNVC: 2
3338163EF5011-90: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-391-8286
Runner

123918286
I005824TAN686A: RNCC: 3 | RNVC: 2

11 Apr 2013

5340-12-393-6725
Angle Bracket

123936725
4100098-723110.012.0: RNCC: 2 | RNVC: 2
4100098-723110.012.0: RNCC: 3 | RNVC: 2

1 Oct 2013

5340-12-356-4178
Manual Control Handle

123564178
6503.165.10.50/004: RNCC: 3 | RNVC: 2

26 Feb 2002

5340-12-300-8879
Mending Plate

123008879
272.305756: RNCC: 3 | RNVC: 2
272-305756: RNCC: 5 | RNVC: 2
272.305756: RNCC: 5 | RNVC: 9

7 Sep 1984

5340-12-300-0901
Mending Plate

123000901
272.1769.312-01: RNCC: 2 | RNVC: 2
272.1769.312-01: RNCC: 3 | RNVC: 2

30 Jun 1984

5340-12-318-9401
Bow Handle

123189401
VG95149B162,5GAL-FB: RNCC: 2 | RNVC: 2
10501-012: RNCC: 3 | RNVC: 2

25 Aug 1989

5340-12-328-0203
Resilient Mount

123280203
SP4-51-04: RNCC: 3 | RNVC: 9
SP4-51-04: RNCC: 5 | RNVC: 2
SP4-51-04: RNCC: 5 | RNVC: 2

31 Mar 1992

5340-12-185-9428
Nonmetallic Bumper

121859428
5800359-020171-04: RNCC: 3 | RNVC: 2
5800359-020171-04: RNCC: 5 | RNVC: 9
5800359-020171.04: RNCC: 5 | RNVC: 9

11 Nov 1980

5340-12-179-3705
Dust And Moisture Seal Protective Cap

121793705
5800822-143: RNCC: 3 | RNVC: 2

27 Jun 1979

5340-12-196-9542
Double Angle Bracket

121969542
A-295065-401: RNCC: 3 | RNVC: 2
A295065-401: RNCC: 5 | RNVC: 2

5 Sep 1983

5340-12-701-4518
Mounting Bracket

127014518
VG95211-ML-127014518: RNCC: 2 | RNVC: 2
5.12.5314.0730.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-187-8162
Double Angle Bracket

121878162
2300109-970499.001.0: RNCC: 2 | RNVC: 2
2300109-970499.001.0: RNCC: 3 | RNVC: 2
2300109-970499.001.0: RNCC: 3 | RNVC: 2
2300109-970499-001-0: RNCC: 5 | RNVC: 9
2300109-970499-001-0: RNCC: 5 | RNVC: 9
2300109-970499.001.0: RNCC: 5 | RNVC: 9
2300109-970499-001-0: RNCC: 5 | RNVC: 9

13 May 1981

5340-12-332-4193
Double Angle Bracket

123324193
480-7347-07-11-00-3-4: RNCC: 3 | RNVC: 2
480/7347-07-11-00/3,4: RNCC: 5 | RNVC: 2

10 Aug 1993

5340-12-337-0355
Mounting Bracket

123370355
2300126-183130.000.0: RNCC: 2 | RNVC: 2
2300126-183130.000.0: RNCC: 3 | RNVC: 2
2300126-183130.000.0: RNCC: 5 | RNVC: 9

12 Jan 1995

5340-12-192-3958
Electrical-Mechanical Equipment Post

121923958
1040-12-00-014-13/0: RNCC: 3 | RNVC: 2
02481153: RNCC: 5 | RNVC: 2
1040-12-00-014-13/0: RNCC: 5 | RNVC: 9

20 Apr 1982

5340-12-387-8940
Dust And Moisture Seal Protective Plug

123878940
19 00 186 FIG.3-2/6: RNCC: 3 | RNVC: 2
102851-00200: RNCC: 5 | RNVC: 2

7 Feb 2012

5340-12-702-3529
Threaded End Tensioning Tie Rod

127023529
VG95211-ML-127023529: RNCC: 2 | RNVC: 2
3849A-25CH1,5-277: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-175-7547
Retaining Strap

121757547
23223-220000.19.0: RNCC: 2 | RNVC: 2
23223-220000-19-0: RNCC: 5 | RNVC: 2
1216310: RNCC: 5 | RNVC: 2
23223-220000.19.0: RNCC: 5 | RNVC: 2
23223-220000-19-0: RNCC: 5 | RNVC: 9
23223-220000.19.0: RNCC: 5 | RNVC: 9

16 Oct 1978

5340-12-190-6684
Loop Clamp

121906684
DIN3016-1-D2-5-11X20-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D2-5-11X20-W1-2: RNCC: 3 | RNVC: 2
RSGU1.5-11/20: RNCC: 3 | RNVC: 2
4219125005: RNCC: 5 | RNVC: 2
RSGU1100.5-11/20: RNCC: 5 | RNVC: 2
DIN3016-D2-5-11X20-W1-2: RNCC: 5 | RNVC: 9

8 Dec 1981

5340-12-702-5267
Mounting Bracket

127025267
VG95211-ML-127025267: RNCC: 2 | RNVC: 2
5.51.7010.0432.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-148-3206
Hand Crank

121483206
VG85086-A-200X17-GT: RNCC: 2 | RNVC: 2
VG85086-A-200X17-GT: RNCC: 3 | RNVC: 2
VG85086-A-200X17-GT: RNCC: 3 | RNVC: 2
VG85086-A-200X17-GT: RNCC: 3 | RNVC: 9
A200X17VG85086GTW40: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-308-2975
Rod End Clevis

123082975
2300223-189250.01.0: RNCC: 2 | RNVC: 2
2300223-189250.01.0: RNCC: 3 | RNVC: 2

24 Sep 1986

5340-12-388-1936
Loop Clamp

123881936
DIN3016-1-D1-13X20-W5-NBR: RNCC: 2 | RNVC: 2

1 Mar 2012

5340-12-378-0585
Clamping Catch

123780585
05608565003: RNCC: 3 | RNVC: 2
NB-G12 W3: RNCC: 5 | RNVC: 2

10 Mar 2009

5340-12-386-6042
Block Clamp

123866042
2500262-199400.001.0: RNCC: 2 | RNVC: 2
2500262-199400.001.0: RNCC: 3 | RNVC: 2

15 Sep 2011

5340-12-301-5863
Handle Grip

123015863
DIN98-E32-AL: RNCC: 2 | RNVC: 2
E32DIN98-AL: RNCC: 5 | RNVC: 2
E32DIN98ALU: RNCC: 5 | RNVC: 2

25 Oct 1984

5340-12-166-9409
Rigid Caster

121669409
65126-13110.04: RNCC: 2 | RNVC: 2
77077-230-13110-04: RNCC: 5 | RNVC: 2
65126-13110-04: RNCC: 5 | RNVC: 9

6 Nov 1976

5340-12-194-5357
Bridge Clamp

121945357
4200078-11900.02: RNCC: 2 | RNVC: 2
4200078-11900.02: RNCC: 3 | RNVC: 2
TG6080-11900.02: RNCC: 3 | RNVC: 2
6080-11900.02: RNCC: 5 | RNVC: 2
4200078-11900.02: RNCC: 5 | RNVC: 9
4200078-11900.02: RNCC: 5 | RNVC: 9

15 Nov 1982

5340-12-121-0381
Nonmetallic Bumper

121210381
VG95092A4,5X2X6X4-PUR60: RNCC: 2 | RNVC: 2
81960200000: RNCC: 3 | RNVC: 2
VG95092A4,5X2X6X4-PUR60: RNCC: 3 | RNVC: 2
00.04361-6047: RNCC: 5 | RNVC: 2
00043616047: RNCC: 5 | RNVC: 2
1960200000: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-318-9163
Manual Control Lever

123189163
14ARA/25ZK: RNCC: 3 | RNVC: 2
33837: RNCC: 5 | RNVC: 2
15065: RNCC: 5 | RNVC: 2
33837: RNCC: 5 | RNVC: 2

24 Aug 1989

5340-12-332-3162
Swivel Caster

123323162
450/STF/150/3P(NATUR): RNCC: 3 | RNVC: 2

28 Jul 1993

5340-12-144-1812
Retaining Strap

121441812
164083090: RNCC: 3 | RNVC: 2
7101-40-98.01: RNCC: 5 | RNVC: 2
7101-40-98-01: RNCC: 5 | RNVC: 2
7101-40-98-01: RNCC: 5 | RNVC: 9
7101-40-98.01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-196-3952
Double Angle Bracket

121963952
272.1414.2-05: RNCC: 3 | RNVC: 2

4 Jul 1983

5340-12-317-4867
Antipilferage Seal

123174867
JG 739: RNCC: 3 | RNVC: 2
JG739: RNCC: 3 | RNVC: 2
49.91.30: RNCC: 3 | RNVC: 2
AESC-JG739: RNCC: 5 | RNVC: 2

12 Apr 1989

5340-12-302-5169
Snap Hook

123025169
DIN5287-B50BK: RNCC: 2 | RNVC: 2
DIN5287-B50-ROH: RNCC: 3 | RNVC: 2
4293-50 BLANK: RNCC: 3 | RNVC: 9
B50DIN5287: RNCC: 5 | RNVC: 2
DIN5287B50: RNCC: 5 | RNVC: 2

9 Jan 1985

5340-12-186-5850
Spring Tension Clip

121865850
C22136-A1000-C87: RNCC: 3 | RNVC: 2
C22136A1000C87: RNCC: 5 | RNVC: 9

19 Jan 1981

5340-12-352-6575
Angle Bracket

123526575
1000192-01 2 30000.25: RNCC: 2 | RNVC: 2
1000192-01 2 30000.25: RNCC: 3 | RNVC: 2
1000192-01230000.25: RNCC: 5 | RNVC: 9
1000192-01 2 30000.25: RNCC: 5 | RNVC: 9

5 Dec 2000

5340-12-315-5359
Loop Clamp

123155359
SVSP175/20ZY: RNCC: 3 | RNVC: 2
05660201175: RNCC: 5 | RNVC: 2
5660201175: RNCC: 5 | RNVC: 2
SVSP175/20ZY-W1: RNCC: 5 | RNVC: 2

4 Nov 1988

5340-12-321-9414
Metal Runner

123219414
702-141300-955-0: RNCC: 3 | RNVC: 2

11 Jul 1990

5340-12-312-6978
Dust And Moisture Seal Protective Plug

123126978
7515: RNCC: 3 | RNVC: 2
206723: RNCC: 5 | RNVC: 2
BW206723: RNCC: 5 | RNVC: 2
UB206723: RNCC: 5 | RNVC: 2
UB206723: RNCC: 5 | RNVC: 2
174-870-0061: RNCC: 5 | RNVC: 2

28 Jan 1988

5340-12-701-8433
Loop Clamp

127018433
VG95211-ML-127018433: RNCC: 2 | RNVC: 2
5149A-18: RNCC: 3 | RNVC: 2
0500812908879: RNCC: 5 | RNVC: 2
0500840248839: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-335-3458
Angle Bracket

123353458
6700018-202500.03: RNCC: 2 | RNVC: 2
6700018-202500.03: RNCC: 3 | RNVC: 2

11 Aug 1994

5340-12-174-3381
Electrical-Mechanical Equipment Post

121743381
52-0164-100-02: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-12-194-5237
Rod End Clevis

121945237
20-5160-034: RNCC: 3 | RNVC: 2

12 Nov 1982

5340-12-332-8111
Double Angle Bracket

123328111
160-78214-04: RNCC: 3 | RNVC: 2
160-78214-04: RNCC: 5 | RNVC: 9

22 Sep 1993

5340-12-331-2024
Resilient Mount

123312024
V1H 5750-01: RNCC: 3 | RNVC: 2
V1H57-50-01: RNCC: 5 | RNVC: 2

1 Apr 1993

5340-12-341-9074
Angle Bracket

123419074
160-75129-06: RNCC: 3 | RNVC: 2
160-75129.06: RNCC: 5 | RNVC: 2
160-75129-06: RNCC: 5 | RNVC: 2
160-75129.06: RNCC: 5 | RNVC: 9

14 Nov 1996

5340-12-333-1291
Dust And Moisture Seal Protective Cap

123331291
9800-00-00.01: RNCC: 3 | RNVC: 2
9800-00-00-01: RNCC: 5 | RNVC: 2

2 Nov 1993

5340-12-310-8760
Mounting Bracket

123108760
7100036-100.04: RNCC: 2 | RNVC: 2
7100036-100.04: RNCC: 5 | RNVC: 9

3 Jul 1987

5340-12-330-7858
Metallic Bumper

123307858
02050-10X100: RNCC: 3 | RNVC: 2
0851 6531.008: RNCC: 5 | RNVC: 2
8516531.008: RNCC: 5 | RNVC: 2
NLM205-10X100: RNCC: 5 | RNVC: 9
NLM2050-10X100: RNCC: 5 | RNVC: 9

9 Feb 1993

5340-12-320-5995
Manual Control Handle

123205995
100330-0515.00: RNCC: 2 | RNVC: 2
1096993: RNCC: 3 | RNVC: 2
100330-0515.00: RNCC: 5 | RNVC: 9
1096993: RNCC: 5 | RNVC: 9

30 Jan 1990

5340-12-174-0266
Mending Plate

121740266
C39117A70C27: RNCC: 3 | RNVC: 2
C39117-A70-C27: RNCC: 5 | RNVC: 2

31 May 1978

5340-12-146-2848
Snap Hook

121462848
1013-80.08/41: RNCC: 3 | RNVC: 2
1013-80-08-41: RNCC: 5 | RNVC: 2
200904: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-159-9051
Retaining Strap

121599051
21-3129-2003: RNCC: 3 | RNVC: 9
C39121-Z63-C3: RNCC: 5 | RNVC: 2
C39121Z63C3: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-345-4961
Retaining Strap

123454961
161 6284 114X25: RNCC: 3 | RNVC: 2
8403424: RNCC: 5 | RNVC: 2

24 Mar 1998

5340-12-375-0399
Bow Handle

123750399
SK976-192461.000.0: RNCC: 3 | RNVC: 2
7087797: RNCC: 5 | RNVC: 2

16 Apr 2008

5340-12-333-4907
Dust And Moisture Seal Protective Cap

123334907
3.3506-0038.1: RNCC: 3 | RNVC: 2
0004311633: RNCC: 5 | RNVC: 2
000431 1633: RNCC: 5 | RNVC: 2

22 Dec 1993

5340-12-701-3721
Mounting Plate

127013721
VG95211-ML-127013721: RNCC: 2 | RNVC: 2
5.12.5305.0101.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-394-1929
Mounting Bracket

123941929
T291M1201101: RNCC: 3 | RNVC: 2

11 Nov 2013

5340-12-343-1413
Mending Plate

123431413
8700720240: RNCC: 2 | RNVC: 2
8700720240: RNCC: 3 | RNVC: 2

9 May 1997

5340-12-394-0075
Loop Clamp

123940075
3650.0211: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-12-342-6281
Handle Grip

123426281
AFG0315512: RNCC: 3 | RNVC: 2

10 Mar 1997

5340-12-323-0452
Access Cover

123230452
1866-010200.04.0: RNCC: 3 | RNVC: 9
1866-010200.04.0: RNCC: 3 | RNVC: 9

18 Oct 1990

5340-12-315-6115
Resilient Mount

123156115
DIN95363-C100X55-NR40ST: RNCC: 2 | RNVC: 2
81120-100X55-M16.NR40.ST: RNCC: 5 | RNVC: 2
25335/C-BSTN40: RNCC: 5 | RNVC: 2
25335/C-BSTN4090: RNCC: 5 | RNVC: 2
VG95363-C100X55-NR40ST: RNCC: 5 | RNVC: 9

12 Nov 1988

5340-12-382-0016
Spring Loaded Cylinder Fastener

123820016
GN607.1-8-A-NI: RNCC: 3 | RNVC: 2

27 Apr 2010

5340-12-382-7663
Spacing Threaded Standoff

123827663
5.14.284: RNCC: 3 | RNVC: 2

6 Aug 2010

5340-12-337-9556
Mounting Bracket

123379556
4623501: RNCC: 3 | RNVC: 2
EZ46235: RNCC: 5 | RNVC: 2

4 May 1995

5340-12-164-5629
Angle Bracket

121645629
23290-187003.001: RNCC: 2 | RNVC: 2
23290-187003-001: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-192-5012
Nonmetallic Solid Wheel

121925012
7820207008: RNCC: 3 | RNVC: 2
5801434-405000.08: RNCC: 5 | RNVC: 2
5801434-405000.08: RNCC: 5 | RNVC: 9
5801434-405000-08: RNCC: 5 | RNVC: 9
78202 07008: RNCC: 5 | RNVC: 9

29 Apr 1982

5340-12-340-7079
Angle Bracket

123407079
105-93910.01: RNCC: 3 | RNVC: 2
105-93910-01: RNCC: 5 | RNVC: 9

29 May 1996

5340-12-136-8252
Expansion Plug

121368252
DIN470-56-ST-PHR: RNCC: 2 | RNVC: 2
56DIN470PHR: RNCC: 5 | RNVC: 2
56DIN470PHRE: RNCC: 5 | RNVC: 2
DIN470-56-ST-MNPHR10F: RNCC: 5 | RNVC: 2
DIN470-56-ST-POSPHATIERT: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-199-5498
Dust And Moisture Seal Protective Plug

121995498
D106702-0.11: RNCC: 2 | RNVC: 2
D106702-0.11: RNCC: 3 | RNVC: 2
129161: RNCC: 5 | RNVC: 2
D106702-011: RNCC: 5 | RNVC: 2
106702-0.11: RNCC: 5 | RNVC: 9

10 May 1984

5340-12-303-5580
Mending Plate

123035580
3-125VG85027: RNCC: 2 | RNVC: 2
HALTERING 3-125VG85027: RNCC: 5 | RNVC: 2

4 Apr 1985

5340-12-701-6573
Angle Bracket

127016573
VG95211-ML-127016573: RNCC: 2 | RNVC: 2
5.12.7208.8200.07: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-182-1493
Platte

121821493
5800823-31-004: RNCC: 3 | RNVC: 2
5800823-31.004: RNCC: 5 | RNVC: 2
5800823-31-004: RNCC: 5 | RNVC: 9

16 Jan 1980

5340-12-701-6244
Mounting Plate

127016244
VG95211-ML-127016244: RNCC: 2 | RNVC: 2
5.12.7030.8010.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-359-4353
Loop Clamp

123594353
DIN3016-1-D1-8X15-W5-NBR: RNCC: 2 | RNVC: 2

5 Feb 2003

5340-12-354-0106
Dust And Moisture Seal Protective Plug

123540106
650/32-R: RNCC: 3 | RNVC: 2
GPN650/32-R: RNCC: 5 | RNVC: 2

28 May 2001

5340-12-187-0961
Detent Plunger

121870961
09-084-54-01-0: RNCC: 3 | RNVC: 2

5 Mar 1981

5340-12-191-2064
Bail Handle

121912064
23111-2155.00: RNCC: 2 | RNVC: 2
23111-2155.00: RNCC: 3 | RNVC: 2
23111-2155-00: RNCC: 5 | RNVC: 9
23111-2155-00: RNCC: 5 | RNVC: 9
23111-2155.00: RNCC: 5 | RNVC: 9

18 Jan 1982

5340-12-194-6918
Retaining Strap

121946918
WW306641-R: RNCC: 3 | RNVC: 9
WW 306 641 -R: RNCC: 5 | RNVC: 2
WW3066410R: RNCC: 5 | RNVC: 2
WW 306 641 -R: RNCC: 5 | RNVC: 9
WW3066410R: RNCC: 5 | RNVC: 9

29 Nov 1982

5340-12-308-5191
Dust And Moisture Seal Protective Cap

123085191
FO-33-509: RNCC: 2 | RNVC: 2
F0-33-509: RNCC: 3 | RNVC: 2

20 Oct 1986

5340-12-303-2424
Mending Plate

123032424
P-886758-409: RNCC: 3 | RNVC: 2
P886758-409: RNCC: 5 | RNVC: 2

8 Mar 1985

5340-12-701-5499
Mounting Plate

127015499
VG95211-ML-127015499: RNCC: 2 | RNVC: 2
5.12.6113.0500.05: RNCC: 3 | RNVC: 2
0501420065899: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-377-2225
Shimmy Damper

123772225
SES2000-B.M16-55SHORE-1.4571: RNCC: 3 | RNVC: 2

18 Dec 2008

5340-12-327-6777
Electrical-Mechanical Equipment Post

123276777
CF 802 309 A: RNCC: 2 | RNVC: 2
VG95148B8XM4X34,7-NRST: RNCC: 2 | RNVC: 2
CF 802 309 A: RNCC: 3 | RNVC: 2

18 Feb 1992

5340-12-701-3358
Rod End Connector

127013358
VG95211-ML-127013358: RNCC: 2 | RNVC: 2
5.12.5111.0160.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-349-6069
Access Cover

123496069
2500238-150030.000.0: RNCC: 2 | RNVC: 2
2500238-150030.000.0: RNCC: 3 | RNVC: 2

8 Dec 1999

5340-12-185-0017
Angle Bracket

121850017
F01-240141-01-0: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-12-308-2974
Rod End Connector

123082974
2300223-189250.02.0: RNCC: 2 | RNVC: 2
2300223-189250.02.0: RNCC: 3 | RNVC: 2

24 Sep 1986

5340-12-391-0467
Angle Bracket

123910467
5804038-201000.04: RNCC: 2 | RNVC: 2
5804038-201000.04: RNCC: 5 | RNVC: 2

17 Jan 2013

5340-12-304-7209
Double Angle Bracket

123047209
2300126-181300.006.0: RNCC: 2 | RNVC: 2
2300126-181300.006.0: RNCC: 3 | RNVC: 2
2300126-181300.006.0: RNCC: 5 | RNVC: 2
2300126-181300.006.0: RNCC: 5 | RNVC: 9

15 Aug 1985

5340-12-307-2242
Case Corner

123072242
31380: RNCC: 3 | RNVC: 2
810391-10-05: RNCC: 5 | RNVC: 9
810391-10.05: RNCC: 5 | RNVC: 9

23 May 1986

5340-12-172-9700
Compression Cup

121729700
H17-5-90NBR/111: RNCC: 3 | RNVC: 2
H17-5-14PA111: RNCC: 5 | RNVC: 2
H17-5-90NBR111: RNCC: 5 | RNVC: 2

6 Mar 1978

5340-12-375-8455
Angle Bracket

123758455
4616920212: RNCC: 3 | RNVC: 2

10 Jul 2008

5340-12-168-5653
Bridge Clamp

121685653
1000025-170000: RNCC: 3 | RNVC: 2
1000025-170000: RNCC: 5 | RNVC: 9

23 Mar 1977

5340-12-301-6091
Mending Plate

123016091
2300107-500000.17: RNCC: 2 | RNVC: 2
2300107-500000.17: RNCC: 3 | RNVC: 2
2300107-500000.17: RNCC: 5 | RNVC: 9
2300107-500000.17: RNCC: 5 | RNVC: 9

26 Oct 1984

5340-12-340-8590
Access Cover

123408590
8848 470-002: RNCC: 3 | RNVC: 2

22 Jun 1996

5340-12-171-9888
Extension Drawer Slide

121719888
66-3506-406-00A001: RNCC: 3 | RNVC: 2
524076: RNCC: 5 | RNVC: 2

8 Dec 1977

5340-12-353-7175
Angle Bracket

123537175
J92222365-001: RNCC: 3 | RNVC: 2

2 May 2001

5340-12-322-2323
Access Cover

123222323
00-15-02-10-00: RNCC: 2 | RNVC: 2
00-15-02-10-00: RNCC: 3 | RNVC: 2

3 Aug 1990

5340-12-129-2640
Retaining Strap

121292640
DIN72571-1X18-ST: RNCC: 2 | RNVC: 2
DIN72571-1X18-ST: RNCC: 3 | RNVC: 2
1X18DIN72571ST: RNCC: 5 | RNVC: 2
1X18DIN72571STR0H: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-177-5160
Handle Grip

121775160
2300002-181021.000: RNCC: 2 | RNVC: 2
2300002-181021.000: RNCC: 3 | RNVC: 2
2300002-181021: RNCC: 5 | RNVC: 9

5 Feb 1979

5340-12-191-2664
Retaining Strap

121912664
23114-1900.16: RNCC: 2 | RNVC: 2
23114-1900.16: RNCC: 3 | RNVC: 2
23114-1900-16: RNCC: 5 | RNVC: 9
23114-1900.16: RNCC: 5 | RNVC: 9
23114-1900-16: RNCC: 5 | RNVC: 9
23114-1900.16: RNCC: 5 | RNVC: 9

20 Jan 1982

5340-12-134-1907
Plain Solid Disk

121341907
7963 032 105: RNCC: 3 | RNVC: 2
8751-71-10.17: RNCC: 5 | RNVC: 2
8751-71-10-17: RNCC: 5 | RNVC: 2
7963032105: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-302-6538
Metal Runner

123026538
5801101-212112.004: RNCC: 3 | RNVC: 2

21 Jan 1985

5340-12-193-9477
Tubular Fairlead Half

121939477
160-634057.01: RNCC: 3 | RNVC: 2
160-634057-01: RNCC: 5 | RNVC: 2
160-634057.01: RNCC: 5 | RNVC: 9

16 Sep 1982

5340-12-190-0348
Webbing Strap

121900348
5801445-30513: RNCC: 2 | RNVC: 2
5801445-30513: RNCC: 3 | RNVC: 2
5801445-30513: RNCC: 5 | RNVC: 9
000-F5-25X2,0X600-PE-RAL6031: RNCC: 6 | RNVC: 9

4 Nov 1981

5340-12-700-3037
Mounting Bracket

127003037
51-262243074: RNCC: 2 | RNVC: 2
700.85.55: RNCC: 3 | RNVC: 2
700-85-55: RNCC: 5 | RNVC: 9

6 Dec 1991

5340-12-303-3439
Resilient Mount

123033439
2K2-BAM-130-G2: RNCC: 3 | RNVC: 2
2K2-BAM-130-G2: RNCC: 5 | RNVC: 9

15 Mar 1985

5340-12-163-0341
Pipe Hanger Extension Bar

121630341
27 717-001: RNCC: 3 | RNVC: 2
27717-001: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-373-9296
Loop Clamp

123739296
JN0529-63: RNCC: 3 | RNVC: 2

19 Dec 2007

5340-12-362-2723
Mounting Plate

123622723
J92228375-001: RNCC: 3 | RNVC: 2

2 Feb 2004

5340-12-198-5017
Retaining Strap

121985017
160-744730-13: RNCC: 3 | RNVC: 2
160-744730-13: RNCC: 5 | RNVC: 9

2 Feb 1984

5340-12-317-9170
Access Cover

123179170
1000192-01 2 10000.07: RNCC: 2 | RNVC: 2
1000192-01 2 10000.07: RNCC: 3 | RNVC: 2
1000192-01 2 10000.07: RNCC: 5 | RNVC: 9

26 May 1989

5340-12-309-8186
Dust And Moisture Seal Protective Cap

123098186
320-997001-05: RNCC: 3 | RNVC: 2

6 Mar 1987

5340-12-151-4932
Friction Catch Stud

121514932
23111-6104-04: RNCC: 2 | RNVC: 2
23111-6104.04: RNCC: 2 | RNVC: 2
23111-6104-04: RNCC: 3 | RNVC: 2
23111-6104-04: RNCC: 5 | RNVC: 9
23111-6104-04: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-379-5372
Access Cover

123795372
520365: RNCC: 3 | RNVC: 2
03-07313-00-16-01: RNCC: 5 | RNVC: 2

5 Aug 2009

5340-12-388-8219
Angle Bracket

123888219
601244-201400.02: RNCC: 2 | RNVC: 2
601244-201400.02: RNCC: 3 | RNVC: 2

26 Apr 2012

5340-12-370-5794
Helical Compression Spring Seat

123705794
V6520-03011-145: RNCC: 2 | RNVC: 2
V6520-03011-145: RNCC: 3 | RNVC: 2

24 Nov 2006

5340-12-351-7660
Webbing Strap

123517660
79671-0006: RNCC: 3 | RNVC: 2

21 Aug 2000

5340-12-192-3173
Resilient Mount

121923173
BQ6.85/16C.21: RNCC: 3 | RNVC: 9
42202286: RNCC: 5 | RNVC: 2
42202286EZ5045-42: RNCC: 5 | RNVC: 2

13 Apr 1982

5340-12-143-5291
Nut And Bolt Locking Plate

121435291
100109-0100-07: RNCC: 2 | RNVC: 2
100109-0100-07: RNCC: 5 | RNVC: 2
100109-0100.07: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-389-7861
Manual Control Lever

123897861
242-2916-30-10-00/32/33: RNCC: 3 | RNVC: 2

23 Aug 2012

5340-12-370-5665
Nut And Bolt Locking Plate

123705665
ED41-2098-00020-139: RNCC: 2 | RNVC: 2
ED41-2098-00020-139: RNCC: 3 | RNVC: 2

22 Nov 2006

5340-12-360-2702
Retaining Strap

123602702
SN5002052: RNCC: 3 | RNVC: 2
96-200.30-02.00-04: RNCC: 5 | RNVC: 2

30 Apr 2003

5340-12-364-5915
Fuehrungs- Schiene

123645915
5160-311100A02B: RNCC: 2 | RNVC: 2
5160-311100A02B: RNCC: 3 | RNVC: 2

13 Oct 2004

5340-12-302-4866
Clamping Catch

123024866
602A590: RNCC: 3 | RNVC: 2
1614 0848-02: RNCC: 5 | RNVC: 2
6022590: RNCC: 5 | RNVC: 2
602K0139: RNCC: 5 | RNVC: 2
1614 0848-02: RNCC: 5 | RNVC: 2
1614 0848-02: RNCC: 5 | RNVC: 2

7 Jan 1985

5340-12-324-3865
Retaining Strap

123243865
6600144-120000.04: RNCC: 2 | RNVC: 2
56493220: RNCC: 3 | RNVC: 2

12 Feb 1991

5340-12-364-6193
Nonmetallic Bumper

123646193
SK 2122-47: RNCC: 3 | RNVC: 2

15 Oct 2004

5340-12-167-2576
Spring Tension Clip

121672576
62708: RNCC: 3 | RNVC: 2
02584847: RNCC: 5 | RNVC: 2
03439691: RNCC: 5 | RNVC: 2
2584847EZ5508-04: RNCC: 5 | RNVC: 2
3439691EZ5505-04: RNCC: 5 | RNVC: 2

7 Dec 1976

5340-12-359-8634
Mounting Bracket

123598634
2300232-972150.000.0: RNCC: 2 | RNVC: 2
2300232-972150.000.0: RNCC: 3 | RNVC: 2

17 Mar 2003

5340-12-192-9800
Double Angle Bracket

121929800
4618510714: RNCC: 3 | RNVC: 2
726 1 83 287 1: RNCC: 5 | RNVC: 9

9 Jun 1982

5340-12-349-7601
Nonmetallic Bumper

123497601
46 54 2 316 319: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-12-378-1866
Buckle

123781866
P20546: RNCC: 3 | RNVC: 2

18 Mar 2009

5340-12-383-2341
Mending Plate

123832341
15001350: RNCC: 3 | RNVC: 2

28 Sep 2010

5340-12-310-4855
Mending Plate

123104855
2300227-343000.001: RNCC: 2 | RNVC: 2
2300227-343000.001: RNCC: 3 | RNVC: 2
2300227-343000.001: RNCC: 5 | RNVC: 9

26 May 1987

5340-12-337-7963
Mortise Lock Set

123377963
81971006099: RNCC: 3 | RNVC: 2
81.97100.6099: RNCC: 5 | RNVC: 2

11 Apr 1995

5340-12-349-6592
Dust And Moisture Seal Protective Cap

123496592
4253409: RNCC: 3 | RNVC: 2

15 Dec 1999

5340-12-304-3305
Escutcheon Plate

123043305
1 34 261: RNCC: 3 | RNVC: 9

5 Jul 1985

5340-12-315-0333
Dust And Moisture Seal Protective Cap

123150333
800M27X1,5: RNCC: 3 | RNVC: 2
800271500: RNCC: 5 | RNVC: 2
GPN800,F.A.M27X1,5: RNCC: 5 | RNVC: 2
GPN800F0RMAM27X1-5: RNCC: 5 | RNVC: 2

9 Sep 1988

5340-12-318-6110
Lock-Release Lever

123186110
0241 9909: RNCC: 3 | RNVC: 2
02419909: RNCC: 5 | RNVC: 2
2419909KZ0148-17: RNCC: 5 | RNVC: 2

1 Aug 1989

5340-12-309-1631
Access Cover

123091631
KM.S01-140100.011: RNCC: 3 | RNVC: 2

19 Dec 1986

5340-12-302-0449
Mending Plate

123020449
536077-1470: RNCC: 3 | RNVC: 2
536077-1470: RNCC: 5 | RNVC: 9
536077-1470.000: RNCC: 5 | RNVC: 9
536077-1470: RNCC: 5 | RNVC: 9
536077-1470.000: RNCC: 5 | RNVC: 9

29 Nov 1984

5340-12-188-8041
Retaining Strap

121888041
5801216-0220.01: RNCC: 3 | RNVC: 2
5801216-0220-01: RNCC: 5 | RNVC: 2
5801216-0220.01: RNCC: 5 | RNVC: 9
5801216-0220-01: RNCC: 5 | RNVC: 9

30 Jul 1981

5340-12-702-2034
Blank Panel

127022034
VG95211-ML-127022034: RNCC: 2 | RNVC: 2
30.7211.1220.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-309-9045
Shimmy Damper

123099045
155608: RNCC: 3 | RNVC: 2
0310350004-0600: RNCC: 5 | RNVC: 2
03-10-350-004-0600N: RNCC: 5 | RNVC: 2

17 Mar 1987

5340-12-174-2248
Mending Plate

121742248
23885-01: RNCC: 3 | RNVC: 2
23885: RNCC: 5 | RNVC: 2
2388501: RNCC: 5 | RNVC: 2

15 Jun 1978

5340-12-321-8335
Manual Control Handle

123218335
172-12560J: RNCC: 3 | RNVC: 2

2 Jul 1990

5340-12-312-5288
Angle Bracket

123125288
P-087196-001: RNCC: 3 | RNVC: 2
P087196-001: RNCC: 5 | RNVC: 2

14 Jan 1988

5340-12-344-3997
Mounting Plate

123443997
P-296883-259: RNCC: 3 | RNVC: 2
P296883-259: RNCC: 5 | RNVC: 2

23 Oct 1997

5340-12-189-0018
Sealing Plug Assembly

121890018
554 EA-PR-R 1 IN: RNCC: 3 | RNVC: 2
554EAPRR1IN: RNCC: 5 | RNVC: 2

18 Aug 1981

5340-12-348-5979
Double Angle Bracket

123485979
7068-21280-002-2: RNCC: 3 | RNVC: 2

23 Jul 1999

5340-12-701-5816
Retaining Strap

127015816
VG95211-ML-127015816: RNCC: 2 | RNVC: 2
5.12.6409.1500.40: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-386-0630
Butt Hinge Leaf

123860630
2005947: RNCC: 3 | RNVC: 2
SK903-037110.004.0: RNCC: 5 | RNVC: 2

4 Aug 2011

5340-12-701-2660
Rod End Clevis

127012660
VG95211-ML-127012660: RNCC: 2 | RNVC: 2
5.12.4805.0001.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-348-2513
Runner

123482513
C-302207-12: RNCC: 3 | RNVC: 2
302207: RNCC: 5 | RNVC: 2
C-302207-12: RNCC: 5 | RNVC: 2

17 May 1999

5340-12-701-6250
Angle Bracket

127016250
VG95211-ML-127016250: RNCC: 2 | RNVC: 2
5.12.7040.1150.11: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-2490
Mounting Bracket

127012490
VG95211-ML-127012490: RNCC: 2 | RNVC: 2
5.12.3600.8220.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-7050
Angle Bracket

127017050
VG95211-ML-127017050: RNCC: 2 | RNVC: 2
5.12.7240.2520.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-162-4737
Resilient Mount

121624737
6785-4 OZONFEST: RNCC: 3 | RNVC: 2
6785-4-OZONFEST: RNCC: 5 | RNVC: 9
6785-40Z0NFEST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-188-8694
Quick Release Plunger

121888694
5801433-020500.00.0: RNCC: 3 | RNVC: 2
5801433-020500-00-0: RNCC: 5 | RNVC: 2
5801433-020500-00-0: RNCC: 5 | RNVC: 9
5801433-020500.00.0: RNCC: 5 | RNVC: 9

5 Aug 1981

5340-12-333-8692
Quick Release Plunger

123338692
404-5-2-14: RNCC: 3 | RNVC: 2
404-5.2.14: RNCC: 5 | RNVC: 2

18 Feb 1994

5340-12-333-4236
Spring Tension Clip

123334236
702-237350-902-0: RNCC: 3 | RNVC: 2

15 Dec 1993

5340-12-157-6695
Eye Hook

121576695
2360-263015.03.0: RNCC: 2 | RNVC: 2
2360-263015-03-0: RNCC: 5 | RNVC: 2
2360-263015.03.0: RNCC: 5 | RNVC: 2
2360-263015-03-0: RNCC: 5 | RNVC: 2
2360-263015.03.0: RNCC: 5 | RNVC: 2
2360-263015-03-0: RNCC: 5 | RNVC: 9
2360-263015.03.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-165-8349
Mending Plate

121658349
25704-190250.02.0: RNCC: 2 | RNVC: 2
25704-190250.02.0: RNCC: 3 | RNVC: 2
25704-190250.02.0: RNCC: 3 | RNVC: 2
25704-190250-02-0: RNCC: 5 | RNVC: 2
25704-190250-02-0: RNCC: 5 | RNVC: 9
25704-190250.02.0: RNCC: 5 | RNVC: 9
25704-190250.02.0: RNCC: 5 | RNVC: 9

2 Jul 1976

5340-12-371-3762
Mounting Plate

123713762
4.002-024.0: RNCC: 3 | RNVC: 2
4.002-024: RNCC: 5 | RNVC: 9

21 Mar 2007

5340-12-168-5624
Compression Cup

121685624
H180-4-BRF-88NBR/101: RNCC: 3 | RNVC: 2
H180-4-88NBR101BRF: RNCC: 5 | RNVC: 2

22 Mar 1977

5340-12-301-2368
Catch Strike

123012368
2500124-091000.051.0: RNCC: 2 | RNVC: 2
336931: RNCC: 3 | RNVC: 2
0316723020: RNCC: 3 | RNVC: 2
2500124-091000.051.0: RNCC: 5 | RNVC: 2
E-03.167.23.02.0: RNCC: 5 | RNVC: 2
K 601005.4: RNCC: 5 | RNVC: 2
1 152 0001 00: RNCC: 5 | RNVC: 2
2500124-091000.051.0: RNCC: 5 | RNVC: 2
K 601005.4: RNCC: 5 | RNVC: 9
2500124-091000.051.0: RNCC: 5 | RNVC: 9

29 Sep 1984

5340-12-306-9976
Mending Plate

123069976
5802038-270300.01.0: RNCC: 2 | RNVC: 2
5802038-270300.01.0: RNCC: 3 | RNVC: 2
5802038-270300-01-0: RNCC: 5 | RNVC: 2
5802038-270300-01-0: RNCC: 5 | RNVC: 9

25 Apr 1986

5340-12-352-4585
Clamping Catch

123524585
5600023-190280.003.0: RNCC: 2 | RNVC: 2
5600023-190280.003.0: RNCC: 3 | RNVC: 2

20 Nov 2000

5340-12-316-9532
Shimmy Damper

123169532
19-120-320-A-A-300N: RNCC: 3 | RNVC: 2
2006.27-1000: RNCC: 5 | RNVC: 2

28 Feb 1989

5340-12-358-4270
Nonmetallic Bumper

123584270
2500261-068180.003.0: RNCC: 2 | RNVC: 2
2500261-068180.003.0: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-12-381-0159
Handle Grip

123810159
9999075-161221.000.0: RNCC: 3 | RNVC: 2

23 Dec 2009

5340-12-171-2538
Mending Plate

121712538
81629412061: RNCC: 3 | RNVC: 2
81.62941-2061: RNCC: 5 | RNVC: 2
23230-172431-001-0: RNCC: 5 | RNVC: 9
23230-172431.001.0: RNCC: 5 | RNVC: 9

21 Sep 1977

5340-12-339-6246
Hand Crank

123396246
VG85086-B-350X27-AM: RNCC: 2 | RNVC: 2
9-45146-02-11: RNCC: 5 | RNVC: 2
B350X27VG85086RG5: RNCC: 5 | RNVC: 2

13 Dec 1995

5340-12-314-5603
Resilient Mount

123145603
60165003-B-M20: RNCC: 3 | RNVC: 2
E1N 3340-02: RNCC: 3 | RNVC: 2
E1N3340-02: RNCC: 5 | RNVC: 2
VG95365-D7-NR-AMST: RNCC: 5 | RNVC: 9

19 Jul 1988

5340-12-702-1829
Retaining Strap

127021829
VG95211-ML-127021829: RNCC: 2 | RNVC: 2
30.7206.1040: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-177-6593
Pad Eye

121776593
306-020-70-141: RNCC: 3 | RNVC: 2
81671200024: RNCC: 5 | RNVC: 2
23251-200651-007-0: RNCC: 5 | RNVC: 9
23251-200651.007.0: RNCC: 5 | RNVC: 9

12 Feb 1979

5340-12-309-3024
Furniture Glide

123093024
NO PRIMARY REF 12-309-3024: RNCC: 3 | RNVC: 2
LM-2820POS14: RNCC: 5 | RNVC: 9

13 Jan 1987

5340-12-316-4807
Angle Bracket

123164807
P-087043-001: RNCC: 3 | RNVC: 2
P087043-001: RNCC: 5 | RNVC: 2

19 Jan 1989

5340-12-386-8267
Electronic Equipment Hardware Kit

123868267
550255-0000.00: RNCC: 3 | RNVC: 2

5 Oct 2011

5340-12-153-6837
Turnbuckle

121536837
90 110 380 NLS STOPPSCHRAUBE: RNCC: 3 | RNVC: 2
421 308: RNCC: 3 | RNVC: 2
88.11.03.00000.00.41: RNCC: 5 | RNVC: 2
WANTENSPANNER B 3/8 INCH: RNCC: 5 | RNVC: 9
629 8002 300: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-359-7425
Access Cover

123597425
2500261-180000.045.0: RNCC: 2 | RNVC: 2
2500261-180000.045.0: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-181-1646
Vent Plug

121811646
44-18157M10X1: RNCC: 3 | RNVC: 2

29 Oct 1979

5340-12-301-4815
Handwheel

123014815
4900247-300: RNCC: 2 | RNVC: 2
7834728: RNCC: 3 | RNVC: 2
3-7834-728: RNCC: 5 | RNVC: 2
7834-728: RNCC: 5 | RNVC: 2

19 Oct 1984

5340-12-196-9010
Pad Eye

121969010
A-243818-405: RNCC: 3 | RNVC: 2
A243818-405: RNCC: 5 | RNVC: 2

30 Aug 1983

5340-12-386-5645
Dust And Moisture Seal Protective Cap

123865645
930/10078: RNCC: 3 | RNVC: 2
0731657: RNCC: 5 | RNVC: 2
GPN 930 FORM B M36X2 110: RNCC: 5 | RNVC: 2

12 Sep 2011

5340-12-319-7483
Extension Drawer Slide

123197483
GM201-356-X: RNCC: 3 | RNVC: 2
2822 030 10951: RNCC: 5 | RNVC: 2
GM201-356: RNCC: 5 | RNVC: 2

31 Oct 1989

5340-12-185-1670
Handle Grip

121851670
1000093-43210.01.0: RNCC: 2 | RNVC: 2
1000093-43210.01.0: RNCC: 3 | RNVC: 2
1000093-43210-01-0: RNCC: 5 | RNVC: 2
1000093-43210-01-0: RNCC: 5 | RNVC: 9
1000093-43210.01.0: RNCC: 5 | RNVC: 9

18 Sep 1980

5340-12-388-6077
Dust And Moisture Seal Protective Plug

123886077
2809990087: RNCC: 3 | RNVC: 2

4 Apr 2012

5340-12-307-7044
Mending Plate

123077044
RP988686: RNCC: 3 | RNVC: 2

17 Jul 1986

5340-12-351-7583
Double Angle Bracket

123517583
J49130000-401: RNCC: 3 | RNVC: 2

21 Aug 2000

5340-12-162-7720
Webbing Strap

121627720
14021-17030-00: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-136-6683
Nonmetallic Bumper

121366683
2526-0300-25: RNCC: 2 | RNVC: 2
2526-0300-25: RNCC: 5 | RNVC: 2
2526-0300-25: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-370-8478
Dust And Moisture Seal Protective Cap

123708478
81467320018: RNCC: 3 | RNVC: 2
81.46732-0018: RNCC: 5 | RNVC: 2

10 Jan 2007

5340-12-148-4855

5340-12-327-4150
Access Cover

123274150
E.FID1.2000.02: RNCC: 3 | RNVC: 2

21 Jan 1992

5340-12-701-9958
Loop Clamp

127019958
VG95211-ML-127019958: RNCC: 2 | RNVC: 2
155N464-657: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-198-3697
Friction Catch Stud

121983697
5800045-1600.02: RNCC: 3 | RNVC: 2

23 Jan 1984

5340-12-311-5483
Angle Bracket

123115483
P-086452-402: RNCC: 3 | RNVC: 2
P086452-402: RNCC: 5 | RNVC: 2

16 Sep 1987

5340-12-173-6612
Resilient Mount

121736612
2-07-000022-01: RNCC: 3 | RNVC: 9
4253330114: RNCC: 5 | RNVC: 2
2-49-07-0050-20: RNCC: 5 | RNVC: 9

28 Apr 1978

5340-12-375-8606
Ball Socket Seat

123758606
F1.1697-00-01-10.00-02: RNCC: 3 | RNVC: 2
H53636: RNCC: 5 | RNVC: 2

14 Jul 2008

5340-12-374-3528
Retaining Strap

123743528
001593019001: RNCC: 3 | RNVC: 2
DIN1593-19 DBL8451.11: RNCC: 5 | RNVC: 2

11 Feb 2008

5340-12-310-1593
Access Cover

123101593
5801338-111: RNCC: 3 | RNVC: 2

13 Apr 1987

5340-12-303-8499
Detent Plunger

123038499
DIN6311-S20-A3P: RNCC: 2 | RNVC: 2
DIN6311-S20-A3P: RNCC: 3 | RNVC: 2

8 May 1985

5340-12-195-6278
Mending Plate

121956278
P-295481-019: RNCC: 3 | RNVC: 2
P295481-019: RNCC: 5 | RNVC: 2

21 Mar 1983

5340-12-371-3346
Mounting Bracket

123713346
2 0001-124: RNCC: 3 | RNVC: 2
2 0001-124: RNCC: 5 | RNVC: 2

16 Mar 2007

5340-12-317-6096
Access Cover

123176096
1000192-00 0 02600: RNCC: 2 | RNVC: 2
1000192-00 0 02600: RNCC: 3 | RNVC: 2
1000192-00 0 02600: RNCC: 5 | RNVC: 9

21 Apr 1989

5340-12-303-2538
Resilient Mount

123032538
DIN95363-B20X25-NR45ST-M6X12: RNCC: 2 | RNVC: 2
1.20.25.3.45NR/ST-M6X12: RNCC: 5 | RNVC: 2
811.010.020.025.06X12.NR45.ST: RNCC: 5 | RNVC: 2
81110-20X25-M6X12.NR45.ST: RNCC: 5 | RNVC: 2
VG95363-B20X25-M6X12-NR45ST: RNCC: 5 | RNVC: 9
8798990055: RNCC: 5 | RNVC: 9
VG95363-B20X25-NR45ST-M6X12: RNCC: 5 | RNVC: 9

8 Mar 1985

5340-12-318-1279
Access Cover

123181279
0295 0769: RNCC: 3 | RNVC: 2
02950769EE0609-98: RNCC: 5 | RNVC: 2

14 Jun 1989

5340-12-319-9328
Door Holder

123199328
3097401316: RNCC: 3 | RNVC: 2

17 Nov 1989

5340-12-365-5889
Double Angle Bracket

123655889
J32320070-001: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-182-7576
Angle Bracket

121827576
00001133150: RNCC: 3 | RNVC: 2
81.65701-2454: RNCC: 5 | RNVC: 2
81657012454: RNCC: 5 | RNVC: 2

25 Feb 1980

5340-12-312-1568
Angle Bracket

123121568
2300218-101300.01: RNCC: 2 | RNVC: 2
2300218-101300.01: RNCC: 3 | RNVC: 2

27 Nov 1987

5340-12-147-2486
Webbing Strap

121472486
AW7048-955: RNCC: 3 | RNVC: 2
132251: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-375-0436
Angle Bracket

123750436
20000-745: RNCC: 3 | RNVC: 2
20000-745: RNCC: 5 | RNVC: 2

16 Apr 2008

5340-12-344-5647
Webbing Strap

123445647
52.3144.270.01: RNCC: 3 | RNVC: 2
52.3144.270.01 LV: RNCC: 5 | RNVC: 2

7 Nov 1997

5340-12-702-2442
Mounting Bracket

127022442
VG95211-ML-127022442: RNCC: 2 | RNVC: 2
30.7715.20: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-348-8658
Support Hook

123488658
320308-05: RNCC: 3 | RNVC: 2

27 Aug 1999

5340-12-314-5189
Mounting Bracket

123145189
113286-0000-000: RNCC: 2 | RNVC: 2
113286: RNCC: 3 | RNVC: 2
113286-0000-000: RNCC: 5 | RNVC: 2

15 Jul 1988

5340-12-182-2212
Mending Plate

121822212
009-504.675-007: RNCC: 2 | RNVC: 2
009-504.675-007: RNCC: 3 | RNVC: 2
5205-675.007: RNCC: 5 | RNVC: 2
009-504-675-007: RNCC: 5 | RNVC: 9
5205-675-007: RNCC: 5 | RNVC: 9

21 Jan 1980

5340-12-363-3257
Mending Plate

123633257
9997039-183100.003.0: RNCC: 3 | RNVC: 2

27 May 2004

5340-12-701-5342
Angle Bracket

127015342
VG95211-ML-127015342: RNCC: 2 | RNVC: 2
5.12.6105.1650.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-124-1206
Rod End Clevis

121241206
DIN71752-G14X56-35S20K-A3P: RNCC: 2 | RNVC: 2
DIN71752-G14X56-35S20K-A3P: RNCC: 3 | RNVC: 2
DIN71752-G14X56-35S20K-A3P: RNCC: 3 | RNVC: 2
100200140056/024-35S20K: RNCC: 5 | RNVC: 2
G14X56DIN71752-35S20K: RNCC: 5 | RNVC: 9
G14X56DIN71752-35S20K: RNCC: 5 | RNVC: 9
DIN71752-G14X56-35S20K: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-340-4104
Hand Crank

123404104
347-153-024: RNCC: 2 | RNVC: 2
347-153-024: RNCC: 3 | RNVC: 2

10 Apr 1996

5340-12-312-5138
Access Hole Frame

123125138
11245-28-6: RNCC: 3 | RNVC: 2
11245-28-6: RNCC: 5 | RNVC: 2

13 Jan 1988

5340-12-328-6711
Dust And Moisture Seal Protective Cap-Plug

123286711
BN2148-1: RNCC: 3 | RNVC: 2

12 Jun 1992

5340-12-158-8957
Folding Stay

121588957
NO PRIMARY REF 12-158-8957: RNCC: 3 | RNVC: 2
1009563: RNCC: 5 | RNVC: 2
5624 GR.2: RNCC: 5 | RNVC: 9
5624GR2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-173-4517
Spring Tension Clip

121734517
23176-261620.03.0: RNCC: 2 | RNVC: 2
23176-261620.03.0: RNCC: 3 | RNVC: 2
23176-261620-03-0: RNCC: 5 | RNVC: 2
23176-261620.03.0: RNCC: 5 | RNVC: 9
23176-261620.03.0: RNCC: 5 | RNVC: 9
23176-261620-03-0: RNCC: 5 | RNVC: 9

18 Apr 1978

5340-12-193-3994
Retaining Strap

121933994
P-295514-007: RNCC: 3 | RNVC: 2
P295514-007: RNCC: 5 | RNVC: 2

19 Jul 1982

5340-12-701-1552
Mounting Bracket

127011552
VG95211-ML-127011552: RNCC: 2 | RNVC: 2
5.12.0220.1803.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-197-5844
Mending Plate

121975844
A-230129-144: RNCC: 3 | RNVC: 2
A230129-144: RNCC: 5 | RNVC: 2

7 Nov 1983

5340-12-303-5576
Mending Plate

123035576
3-50VG85027: RNCC: 2 | RNVC: 2
HALTERING 3-50VG85027: RNCC: 5 | RNVC: 2

4 Apr 1985

5340-12-308-2947
Double Angle Bracket

123082947
P-875978-001: RNCC: 3 | RNVC: 2
P875978-001: RNCC: 5 | RNVC: 2

24 Sep 1986

5340-12-164-1045
Loop Clamp

121641045
DIN3016-2-G1-54X12-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-54X12-W1-2: RNCC: 3 | RNVC: 2
SP54/12SKZ: RNCC: 3 | RNVC: 2
1310005054: RNCC: 5 | RNVC: 2
SP54-12ZY: RNCC: 5 | RNVC: 2
DIN3016-G1-54X12-W1-2: RNCC: 5 | RNVC: 9
VG95931-G54X12-W1: RNCC: 5 | RNVC: 9
VG95931G54X12W1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-189-7692
Hand Crank

121897692
VG85086-A-175X14-AM: RNCC: 2 | RNVC: 2
VG85086-A-175X14-AM: RNCC: 3 | RNVC: 2
VG85086-A-175X14-AM: RNCC: 3 | RNVC: 2
VG85086-A-175X14-AM: RNCC: 3 | RNVC: 9
A175X14VG85086-2.1096: RNCC: 5 | RNVC: 9
A175X14VG85086-RG5: RNCC: 5 | RNVC: 9
A175X14VG85086GCUSN5ZNPB: RNCC: 5 | RNVC: 9
A175X14VG85086RG5: RNCC: 5 | RNVC: 9

21 Oct 1981

5340-12-305-8463
Catch Strike

123058463
127-01/72632: RNCC: 3 | RNVC: 2
51L7-1BF-3,2MM BOHRUNG-GESENKT: RNCC: 5 | RNVC: 2
127-01/72632: RNCC: 5 | RNVC: 9

23 Dec 1985

5340-12-180-7429
Retaining Strap

121807429
1246-461.7: RNCC: 2 | RNVC: 2
1246-461.07: RNCC: 3 | RNVC: 2
1246-461.7: RNCC: 3 | RNVC: 2
1246-461-7: RNCC: 5 | RNVC: 2
1246-461-7: RNCC: 5 | RNVC: 9
1246-461.07: RNCC: 5 | RNVC: 9

1 Oct 1979

5340-12-193-7481
Webbing Strap

121937481
020208-612200: RNCC: 2 | RNVC: 2
020208-612200: RNCC: 3 | RNVC: 2
8-03-03-98-0: RNCC: 5 | RNVC: 2
020208-612200: RNCC: 5 | RNVC: 9

26 Aug 1982

5340-12-318-7648
Double Angle Bracket

123187648
704-126130-904-0: RNCC: 3 | RNVC: 2

15 Aug 1989

5340-12-350-1008
Strap Hinge

123501008
2300285-181000.003.0: RNCC: 2 | RNVC: 2
2300285-181000.003.0: RNCC: 3 | RNVC: 2

15 Feb 2000

5340-12-150-8630
Dust And Moisture Seal Protective Cap

121508630
390004-610.9: RNCC: 2 | RNVC: 2
390004-610.9: RNCC: 3 | RNVC: 2
390004-610-9: RNCC: 5 | RNVC: 9
390004-610.9: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-177-0744
Platte

121770744
5801215-0-018: RNCC: 3 | RNVC: 2
5801215-0.018: RNCC: 5 | RNVC: 2

12 Jan 1979

5340-12-330-8886
Rod End Clevis

123308886
480-7346-02-13-00: RNCC: 3 | RNVC: 2
480/7346-02-13-00: RNCC: 5 | RNVC: 2

19 Feb 1993

5340-12-300-7975
Double Angle Bracket

123007975
23114-7200.01: RNCC: 2 | RNVC: 2
23114-7200.01: RNCC: 3 | RNVC: 2
23114-7200.01: RNCC: 5 | RNVC: 9
23114-7200-01: RNCC: 5 | RNVC: 9
23114-7200.01: RNCC: 5 | RNVC: 9
23114-7200-01: RNCC: 5 | RNVC: 9

31 Aug 1984

5340-12-323-4780
Resilient Mount

123234780
1208 1261: RNCC: 3 | RNVC: 2
12081261KZ0111-47: RNCC: 5 | RNVC: 2
3.602.9.085.041.5: RNCC: 5 | RNVC: 2

29 Nov 1990

5340-12-329-5711
Mounting Plate

123295711
7068-21200-019-2: RNCC: 3 | RNVC: 2

2 Sep 1992

5340-12-388-8909
Access Cover

123888909
1003789: RNCC: 3 | RNVC: 2
SK903-042330.000.0: RNCC: 5 | RNVC: 2
4616900807: RNCC: 5 | RNVC: 2

3 May 2012

5340-12-351-7670
Loop Clamp

123517670
IKLN82-253-1.0037: RNCC: 3 | RNVC: 2

21 Aug 2000

5340-12-345-5966
Angle Bracket

123455966
A70-0002: RNCC: 3 | RNVC: 2
1501998-0101-M: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-12-326-5799
Hinge Torsion Bar

123265799
2300232-182100.020.0: RNCC: 2 | RNVC: 2
2300232-182100.020.0: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-12-342-6193
Mounting Bracket

123426193
0001-200000-901-0: RNCC: 2 | RNVC: 2
0001-200000-901-0: RNCC: 3 | RNVC: 2
0001-200000-901: RNCC: 5 | RNVC: 9

7 Mar 1997

5340-12-373-9148
Dust And Moisture Seal Protective Plug

123739148
600B740: RNCC: 3 | RNVC: 2
GPN600-B740: RNCC: 5 | RNVC: 2
GPN600B740: RNCC: 5 | RNVC: 2

18 Dec 2007

5340-12-702-5555
Angle Bracket

127025555
VG95211-ML-127025555: RNCC: 2 | RNVC: 2
5.51.7226.0020.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-371-8635
Angle Bracket

123718635
1505678: RNCC: 3 | RNVC: 2
548-060200.04.0: RNCC: 5 | RNVC: 2
15010524: RNCC: 5 | RNVC: 2

23 May 2007

5340-12-125-1653
Support Hook

121251653
2759-056: RNCC: 3 | RNVC: 2
2759056: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-701-6517
Mounting Bracket

127016517
VG95211-ML-127016517: RNCC: 2 | RNVC: 2
5.12.7206.1741.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-393-8439
Mounting Bracket

123938439
11.48952-0200: RNCC: 3 | RNVC: 2
11.48952-0200: RNCC: 5 | RNVC: 2

16 Oct 2013

5340-12-394-6184
Rim Lock

123946184
3111-0031: RNCC: 3 | RNVC: 2

19 Dec 2013

5340-12-320-1332
Kunst Gleitschiene

123201332
0679601: RNCC: 3 | RNVC: 2

11 Dec 1989

5340-12-346-6065
Manual Control Lever

123466065
KM2401516: RNCC: 3 | RNVC: 2
KM 240.1516: RNCC: 5 | RNVC: 2

17 Aug 1998

5340-12-702-6222
Angle Bracket

127026222
VG95211-ML-127026222: RNCC: 2 | RNVC: 2
68 OST1 12560-76: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-9965
Loop Clamp

127019965
VG95211-ML-127019965: RNCC: 2 | RNVC: 2
155N464-703: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-186-7457
Double Angle Bracket

121867457
5802206-137000-002: RNCC: 2 | RNVC: 2
535.4242: RNCC: 3 | RNVC: 2
5354242: RNCC: 5 | RNVC: 2

2 Feb 1981

5340-12-369-2373
Section Block Clamp

123692373
1404003-000.06: RNCC: 2 | RNVC: 2
1404003-000.06: RNCC: 3 | RNVC: 2

8 Jun 2006

5340-12-316-9597
Schlosz Schluessel

123169597
4529C: RNCC: 3 | RNVC: 2
63120142: RNCC: 5 | RNVC: 2
4632-MMCH: RNCC: 5 | RNVC: 2

28 Feb 1989

5340-12-701-9707
Rod End Clevis

127019707
VG95211-ML-127019707: RNCC: 2 | RNVC: 2
01.9202.222: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-354-8329
Mounting Bracket

123548329
5400049-111825.00: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-390-4639
Access Cover

123904639
2300559-188640.000.0: RNCC: 3 | RNVC: 2

15 Nov 2012

5340-12-311-9449
Vent Plug

123119449
D133-756.18E: RNCC: 3 | RNVC: 2

2 Nov 1987

5340-12-393-1592
Section Block Clamp

123931592
2324784000: RNCC: 3 | RNVC: 2

14 Aug 2013

5340-12-348-0674
Mounting Bracket

123480674
58R059-84411: RNCC: 2 | RNVC: 2
58R059-84411: RNCC: 3 | RNVC: 2

8 Apr 1999

5340-12-323-4912
Retaining Strap

123234912
251407083000: RNCC: 3 | RNVC: 2
25 1407 08 30 00: RNCC: 5 | RNVC: 2
25.1407.08.30.00: RNCC: 5 | RNVC: 2
251407083000: RNCC: 5 | RNVC: 2
25 1407 08 30 00: RNCC: 5 | RNVC: 2
25.1407.08.30.00: RNCC: 5 | RNVC: 2

30 Nov 1990

5340-12-356-1482
Mounting Bracket

123561482
4616830114: RNCC: 3 | RNVC: 2

28 Jan 2002

Load More Results