What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 113 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 113 of 178

5340-12-190-3045
Electronic Equipment Hardware Kit

121903045
5801357-6052.00: RNCC: 2 | RNVC: 2
5801357-6052.00: RNCC: 3 | RNVC: 2

17 Nov 1981

5340-12-179-6385
Nonmetallic Bumper

121796385
3229870139: RNCC: 3 | RNVC: 2

13 Jul 1979

5340-12-136-5262
Spring Tension Clip

121365262
N0143893: RNCC: 3 | RNVC: 2
N143893: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-393-8441
Mounting Bracket

123938441
11.48944-2190: RNCC: 3 | RNVC: 2
11.48944-2190: RNCC: 5 | RNVC: 2

16 Oct 2013

5340-12-163-8284

5340-12-312-7287
Mending Plate

123127287
3818851611: RNCC: 3 | RNVC: 2
381 885 16 11: RNCC: 5 | RNVC: 2

29 Jan 1988

5340-12-130-1130

5340-12-352-5791
Mounting Bracket

123525791
81155010856: RNCC: 3 | RNVC: 2
81.15501.0856: RNCC: 5 | RNVC: 2

28 Nov 2000

5340-12-386-8148
Rigid Caster

123868148
8478UOO125P62: RNCC: 3 | RNVC: 2
4031582313406: RNCC: 5 | RNVC: 2

5 Oct 2011

5340-12-381-1059
Mechanic Equipment Hardware Kit

123811059
0009700700: RNCC: 3 | RNVC: 2

12 Jan 2010

5340-12-373-3905
Access Cover

123733905
5241880502: RNCC: 3 | RNVC: 2
524 188 05 02: RNCC: 5 | RNVC: 2

29 Oct 2007

5340-12-301-7455
Access Cover

123017455
4178970: RNCC: 3 | RNVC: 2
S12B.E03.01.27.000: RNCC: 5 | RNVC: 2

7 Nov 1984

5340-12-701-8418
Loop Clamp

127018418
VG95211-ML-127018418: RNCC: 2 | RNVC: 2
5148A-30: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-7634
Rod End Connector

127027634
50-06100730045: RNCC: 2 | RNVC: 2

15 Dec 1995

5340-12-363-1276
Multiple Angle Bracket

123631276
160-27203-01: RNCC: 3 | RNVC: 2
160-27203.01: RNCC: 5 | RNVC: 2

6 May 2004

5340-12-172-3987
Handle Grip

121723987
1361035-13760-00: RNCC: 3 | RNVC: 2

19 Jan 1978

5340-12-386-4907
Access Cover

123864907
V6520-03071-103: RNCC: 3 | RNVC: 2

6 Sep 2011

5340-12-198-5589
Butt Hinge Leaf

121985589
NO PRIMARY REF 12-198-5589: RNCC: 3 | RNVC: 2
6011 123836: RNCC: 5 | RNVC: 9

9 Feb 1984

5340-12-310-3509
Access Cover

123103509
38012-0700.01: RNCC: 2 | RNVC: 2
38012-0700.01: RNCC: 3 | RNVC: 2
38012-0700.01: RNCC: 5 | RNVC: 9

13 May 1987

5340-12-702-7936
Mounting Bracket

127027936
25-08301122424: RNCC: 2 | RNVC: 2

20 Dec 1995

5340-12-320-6509
Loop Clamp

123206509
DIN3015-LH-5R-38-PP-W1: RNCC: 2 | RNVC: 2
HRL5D38PP STMBL: RNCC: 3 | RNVC: 2
RAPR18-538: RNCC: 3 | RNVC: 2
538PP-SIG-AF: RNCC: 3 | RNVC: 2
RAPR18-538: RNCC: 5 | RNVC: 2
DIN3015-LH5R-38PP-W1: RNCC: 5 | RNVC: 2

5 Feb 1990

5340-12-349-7917
Nonmetallic Bumper

123497917
U60.232000.04-00: RNCC: 3 | RNVC: 2

10 Jan 2000

5340-12-197-4060
Mending Plate

121974060
5801813-527000.01: RNCC: 2 | RNVC: 2
5801813-527000-01: RNCC: 5 | RNVC: 9

19 Oct 1983

5340-12-167-5476
Spring Tension Clip

121675476
3553514: RNCC: 3 | RNVC: 2
2848-2244-01: RNCC: 5 | RNVC: 2
3553514: RNCC: 5 | RNVC: 2

3 Jan 1977

5340-12-165-4304
Hinge Torsion Bar

121654304
160-73418-04: RNCC: 3 | RNVC: 2
160-73418-04: RNCC: 5 | RNVC: 9

29 Apr 1976

5340-12-338-1741
Double Angle Bracket

123381741
70925-410: RNCC: 3 | RNVC: 2

31 May 1995

5340-12-388-8925
Spring Holder

123888925
D0102806-001: RNCC: 3 | RNVC: 2

3 May 2012

5340-12-171-2342
Dust And Moisture Seal Protective Cap

121712342
4A78322: RNCC: 3 | RNVC: 2
81.96410-0076: RNCC: 5 | RNVC: 2
2964308EY5061-28: RNCC: 5 | RNVC: 2
81964100076: RNCC: 5 | RNVC: 2
02964308: RNCC: 5 | RNVC: 2

21 Sep 1977

5340-12-334-0986
Dust And Moisture Seal Boot

123340986
04076500: RNCC: 3 | RNVC: 2

21 Mar 1994

5340-12-360-6982
Mounting Bracket

123606982
P70162100003: RNCC: 3 | RNVC: 2

1 Jul 2003

5340-12-322-6511
Spring Tension Clip

123226511
5240076: RNCC: 3 | RNVC: 2

10 Sep 1990

5340-12-362-8357
Door Button

123628357
1000-U631: RNCC: 3 | RNVC: 2

6 Apr 2004

5340-12-314-5445
Double Angle Bracket

123145445
4254263640: RNCC: 3 | RNVC: 2
425 426 36 40: RNCC: 5 | RNVC: 2

16 Jul 1988

5340-12-372-0727
Angle Bracket

123720727
8520606: RNCC: 3 | RNVC: 2

15 Jun 2007

5340-12-166-6020
Door Handle

121666020
WW414216ER: RNCC: 3 | RNVC: 9
WW 414 216 ER: RNCC: 5 | RNVC: 2
WW414216ER: RNCC: 5 | RNVC: 2
WW 414 216 ER: RNCC: 5 | RNVC: 9

28 Sep 1976

5340-12-324-6685
Loop Clamp

123246685
272.322 432: RNCC: 3 | RNVC: 2

13 Mar 1991

5340-12-122-6219
Retaining Strap

121226219
4044920140: RNCC: 3 | RNVC: 2
324041100800: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-094-0960

5340-12-025-0486

5340-12-393-5976
Pipe Bracket

123935976
06.66040-0202: RNCC: 3 | RNVC: 2
06.66040-0202: RNCC: 5 | RNVC: 2
409.04.031: RNCC: 5 | RNVC: 2

26 Sep 2013

5340-12-349-7135
Mounting Bracket

123497135
FAST-301400.03: RNCC: 2 | RNVC: 2
FAST-301400.03: RNCC: 3 | RNVC: 2

28 Dec 1999

5340-12-353-8618
Angle Bracket

123538618
J29120245-403: RNCC: 3 | RNVC: 2
J29120245-401: RNCC: 5 | RNVC: 9

16 May 2001

5340-12-185-8921
Access Cover

121858921
51-6861-682-00LV: RNCC: 3 | RNVC: 2

6 Nov 1980

5340-12-356-1221
Mounting Bracket

123561221
2339-160000A00C: RNCC: 3 | RNVC: 2

24 Jan 2002

5340-12-361-4405
Mounting Bracket

123614405
1873-830000.003.0: RNCC: 3 | RNVC: 2

30 Sep 2003

5340-12-192-8955
Catch Strike

121928955
4607430603: RNCC: 3 | RNVC: 2
721 2 66 603 1: RNCC: 5 | RNVC: 9

3 Jun 1982

5340-12-366-2230
Multiple Angle Bracket

123662230
7042646: RNCC: 2 | RNVC: 2
7042646: RNCC: 3 | RNVC: 2

23 Mar 2005

5340-12-362-6980
Dust And Moisture Seal Protective Cover

123626980
571646808: RNCC: 3 | RNVC: 2

19 Mar 2004

5340-12-342-9921
Pipe Hanger

123429921
5058-095: RNCC: 3 | RNVC: 2

21 Apr 1997

5340-12-353-2565
Angle Bracket

123532565
160-76980-01: RNCC: 3 | RNVC: 2

21 Feb 2001

5340-12-339-9409
Dust And Moisture Seal Boot

123399409
81964200292: RNCC: 3 | RNVC: 2
81.96420-0292: RNCC: 5 | RNVC: 2
080 480 001 012: RNCC: 5 | RNVC: 2

5 Feb 1996

5340-12-310-5814
Retaining Strap

123105814
2300013-1212.01: RNCC: 2 | RNVC: 2
2300013-1212.01: RNCC: 3 | RNVC: 2
2300013-1212.01: RNCC: 5 | RNVC: 9

4 Jun 1987

5340-12-701-9712
Expansion Plug

127019712
VG95211-ML-127019712: RNCC: 2 | RNVC: 2
02.6114.1521: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-307-9405
Mending Plate

123079405
5801434-511000.04: RNCC: 2 | RNVC: 2
7800541004: RNCC: 3 | RNVC: 2
78005 41004: RNCC: 5 | RNVC: 9

13 Aug 1986

5340-12-387-3757
Dust And Moisture Seal Protective Plug

123873757
GPN950/0208: RNCC: 3 | RNVC: 2
950/0208: RNCC: 5 | RNVC: 2
D0010271-BUND: RNCC: 5 | RNVC: 2

6 Dec 2011

5340-12-199-0758
Lock-Release Lever

121990758
530363-8028: RNCC: 3 | RNVC: 2
530363-8028: RNCC: 5 | RNVC: 9
530363-8028.000: RNCC: 5 | RNVC: 9

23 Mar 1984

5340-12-352-0643
Mounting Plate

123520643
2500238-160221.006.0: RNCC: 2 | RNVC: 2
2500238-160221.006.0: RNCC: 3 | RNVC: 2

12 Oct 2000

5340-12-700-8581
Threaded End Tensioning Tie Rod

127008581
VG95211-ML-127008581: RNCC: 2 | RNVC: 2
155N1220-22-1,5-1204: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-319-8980
Angle Bracket

123198980
852-100001.02.0: RNCC: 2 | RNVC: 2
852-100001.02.0: RNCC: 3 | RNVC: 2
852-100001.02.0: RNCC: 5 | RNVC: 9

15 Nov 1989

5340-12-390-4110
Mending Plate

123904110
2300559-067320.004.0: RNCC: 2 | RNVC: 2
2300559-067320.004.0: RNCC: 3 | RNVC: 2

9 Nov 2012

5340-12-170-7801
Butt Hinge

121707801
DIN7954-C40-MS-BK: RNCC: 2 | RNVC: 2
C40DIN7954MS: RNCC: 5 | RNVC: 2

5 Aug 1977

5340-12-386-2641
Mending Plate

123862641
4000A-341270.001.0: RNCC: 2 | RNVC: 2
4000A-341270.001.0: RNCC: 3 | RNVC: 2

19 Aug 2011

5340-12-332-9451
Mending Plate

123329451
706-184500-902-0: RNCC: 3 | RNVC: 2

8 Oct 1993

5340-12-701-4121
Mounting Bracket

127014121
VG95211-ML-127014121: RNCC: 2 | RNVC: 2
5.12.5311.8390.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-355-4198
Mounting Bracket

123554198
1000042-112650.03: RNCC: 3 | RNVC: 2

14 Nov 2001

5340-12-316-4108
Festhalte- Klipp

5340-12-337-9939
Mounting Plate

123379939
7147201: RNCC: 3 | RNVC: 2

9 May 1995

5340-12-195-0125
Plug Button

121950125
2224520031: RNCC: 3 | RNVC: 2
22245 20031: RNCC: 5 | RNVC: 9

30 Dec 1982

5340-12-377-3629
Spring Tension Clip

123773629
41118242: RNCC: 3 | RNVC: 2

13 Jan 2009

5340-12-328-6735
Detent Plunger

123286735
075145307: RNCC: 3 | RNVC: 2
075 145 307: RNCC: 5 | RNVC: 2
075 145 307: RNCC: 5 | RNVC: 2

12 Jun 1992

5340-12-196-5540
Butt Hinge Leaf

121965540
81420300021: RNCC: 3 | RNVC: 2
81.42030.0021: RNCC: 5 | RNVC: 2

18 Jul 1983

5340-12-307-3746
Angle Bracket

123073746
2463001: RNCC: 3 | RNVC: 2

10 Jun 1986

5340-12-355-4875
Mounting Bracket

123554875
4615000731: RNCC: 3 | RNVC: 2

20 Nov 2001

5340-12-306-8287
Metal Runner

123068287
54.0028.392.04: RNCC: 3 | RNVC: 2

8 Apr 1986

5340-12-326-2076
Angle Bracket

123262076
3852670040: RNCC: 3 | RNVC: 2
385 267 00 40: RNCC: 5 | RNVC: 2

16 Aug 1991

5340-12-314-4563
Mounting Bracket

123144563
272.332 426: RNCC: 2 | RNVC: 2
272.332.426: RNCC: 3 | RNVC: 2
272.332 426: RNCC: 5 | RNVC: 9

8 Jul 1988

5340-12-043-3301

5340-12-094-5200

5340-12-040-5436

5340-12-196-4895
Case Corner

121964895
6200005: RNCC: 3 | RNVC: 2

12 Jul 1983

5340-12-199-3838
Retaining Strap

121993838
52.9794.000.09: RNCC: 3 | RNVC: 2

19 Apr 1984

5340-12-194-7919
Electrical-Mechanical Equipment Post

121947919
4960869: RNCC: 3 | RNVC: 2
496.0869: RNCC: 5 | RNVC: 2

8 Dec 1982

5340-12-357-1411
Angle Bracket

123571411
T221M3001205: RNCC: 3 | RNVC: 2

13 May 2002

5340-12-381-4514
Mounting Bracket

123814514
Z=30470: RNCC: 3 | RNVC: 2

18 Feb 2010

5340-12-317-0283
Nonmetallic Bumper

123170283
602A964: RNCC: 3 | RNVC: 2
5CX091-8: RNCC: 5 | RNVC: 2

6 Mar 1989

5340-12-701-6347
Angle Bracket

127016347
5.12.7060.1450.46: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-317-7758
Access Cover

123177758
3/0448/7127/0: RNCC: 3 | RNVC: 2

11 May 1989

5340-12-184-7749
Friction Catch Stud

121847749
CF 429 209 -R: RNCC: 3 | RNVC: 2
CF 429 209 -R: RNCC: 5 | RNVC: 2
CF4292090R: RNCC: 5 | RNVC: 2
CF4292090R: RNCC: 5 | RNVC: 2

16 Aug 1980

5340-12-188-8373
Spring Holder

121888373
VG95211-ML-121888373: RNCC: 2 | RNVC: 2
105-20151.05: RNCC: 3 | RNVC: 2
105-20151-05: RNCC: 5 | RNVC: 2

3 Aug 1981

5340-12-199-3034
Butt Hinge

121993034
71100-3100-00-04: RNCC: 3 | RNVC: 2
71100-3100-00-04: RNCC: 5 | RNVC: 2
71100-3100-00-04: RNCC: 5 | RNVC: 9

11 Apr 1984

5340-12-354-8174
Electronic Equipment Hardware Kit

123548174
R05331-801: RNCC: 3 | RNVC: 2

28 Aug 2001

5340-12-320-6597
Access Cover

123206597
51252301601: RNCC: 3 | RNVC: 2
2301601: RNCC: 5 | RNVC: 2

5 Feb 1990

5340-12-325-7193
Dust And Moisture Seal Protective Cap

123257193
3574620196: RNCC: 3 | RNVC: 2

2 Jul 1991

5340-12-184-6758
Butt Hinge Leaf

121846758
CF429110AX: RNCC: 3 | RNVC: 2
CF429110AX: RNCC: 5 | RNVC: 2
CF 429 110 AX: RNCC: 5 | RNVC: 2
CF 429 110 AX: RNCC: 5 | RNVC: 2

12 Aug 1980

5340-12-312-7275
Double Angle Bracket

123127275
3818201414: RNCC: 3 | RNVC: 2
381 820 14 14: RNCC: 5 | RNVC: 2

29 Jan 1988

5340-12-381-5401
Loop Clamp

123815401
535PPLI: RNCC: 3 | RNVC: 2

2 Mar 2010

5340-12-313-6815
Nonmetallic Bumper

123136815
024253: RNCC: 3 | RNVC: 2

26 Apr 1988

5340-12-134-4901

5340-12-358-7816
Nonmetallic Bumper

123587816
ETP080X40: RNCC: 3 | RNVC: 2

14 Nov 2002

5340-12-340-1337
Strap Fastener Loop

123401337
4618650078: RNCC: 3 | RNVC: 2
460 751 01 32: RNCC: 3 | RNVC: 9

2 Mar 1996

5340-12-391-0415
Surface Bolt

123910415
6000056-341200.004.0: RNCC: 2 | RNVC: 2
6000056-341200.004.0: RNCC: 3 | RNVC: 2

17 Jan 2013

5340-12-148-4714
Loop Clamp

121484714
G8TAN15802-0: RNCC: 3 | RNVC: 2
F8TAN15802-0: RNCC: 5 | RNVC: 2
G8TAN15802-3-1364-5: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-350-2922
Dust And Moisture Seal Protective Cap

123502922
G1BN230-03: RNCC: 3 | RNVC: 2
AGT5000/20-05-000: RNCC: 5 | RNVC: 2

14 Mar 2000

5340-12-327-0640
Angle Bracket

123270640
5803674-206100.00: RNCC: 2 | RNVC: 2
7804234010: RNCC: 3 | RNVC: 2
78042 34010: RNCC: 5 | RNVC: 9

27 Nov 1991

5340-12-310-6238
Resilient Mount

123106238
DIN95363-B30X20-M8X11-NR70ST: RNCC: 2 | RNVC: 2
0054030020: RNCC: 5 | RNVC: 2
2300226-190000.050.0: RNCC: 5 | RNVC: 2
81110-2300226-190000.050.0NR70ST: RNCC: 5 | RNVC: 2
2300226-190000.050.0: RNCC: 5 | RNVC: 2
2300226-190000.050.0: RNCC: 5 | RNVC: 2
2300226-190000.050.0: RNCC: 5 | RNVC: 2
2300226-190000.050.0: RNCC: 5 | RNVC: 9
VG95363-B30X20-M8X11-NR70ST: RNCC: 5 | RNVC: 9

10 Jun 1987

5340-12-369-2159
Spacing Threaded Standoff

123692159
D0046490-001: RNCC: 3 | RNVC: 2

6 Jun 2006

5340-12-177-2115
Resilient Mount

121772115
DIN95363-A30X25-M8X12-NR45ST: RNCC: 2 | RNVC: 2
500032-M8X12.NR45.ST: RNCC: 5 | RNVC: 2
3879880011: RNCC: 5 | RNVC: 2
VG95363-A30X25-M8X12-NR45ST: RNCC: 5 | RNVC: 9

19 Jan 1979

5340-12-702-2066
Blank Panel

127022066
VG95211-ML-127022066: RNCC: 2 | RNVC: 2
30.7211.490.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-147-8969
Resilient Mount

121478969
82300-GET-NT4.70.NR55.ST: RNCC: 3 | RNVC: 2
NT4-70-25A: RNCC: 3 | RNVC: 9
0144-46-200-01: RNCC: 5 | RNVC: 2
0336 0826: RNCC: 5 | RNVC: 2
3360826ED0144-46: RNCC: 5 | RNVC: 2
3360826: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-331-5411
Mending Plate

123315411
60807-181: RNCC: 3 | RNVC: 2
ECTA30240499: RNCC: 5 | RNVC: 2

17 May 1993

5340-12-144-8735
Butt Hinge Leaf

121448735
B25X3X448HAN16515W3355-7SWEL0X: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-355-7143
Rod End Connector

123557143
2125-121600B01B: RNCC: 2 | RNVC: 2
2125-121600B01B: RNCC: 3 | RNVC: 2

10 Dec 2001

5340-12-322-6493
Headless Straight Rod

123226493
3500.127.70.00/033: RNCC: 3 | RNVC: 2
1802091: RNCC: 5 | RNVC: 2
1802091: RNCC: 5 | RNVC: 2
3500.127.70/33: RNCC: 5 | RNVC: 2

10 Sep 1990

5340-12-371-5158
Padlock

123715158
3381G: RNCC: 3 | RNVC: 2

11 Apr 2007

5340-12-010-2881

5340-12-321-6050
Case Corner

123216050
42445/6200-03: RNCC: 3 | RNVC: 2

6 Jun 1990

5340-12-377-4174
Lock-Release Lever

123774174
8605001.3.552.00: RNCC: 3 | RNVC: 2
8605001355200: RNCC: 5 | RNVC: 2

15 Jan 2009

5340-12-304-3287
Retaining Strap

123043287
8 56 622: RNCC: 3 | RNVC: 9

5 Jul 1985

5340-12-310-9937
Double Angle Bracket

123109937
1.003.007: RNCC: 3 | RNVC: 2
1.003.007: RNCC: 5 | RNVC: 9

16 Jul 1987

5340-12-328-9145
Loop Clamp

123289145
2300232-972070.001.0: RNCC: 2 | RNVC: 2
2300232-972070.001.0: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-12-329-0105
Butt Hinge

123290105
0.021.049.9: RNCC: 3 | RNVC: 2

8 Jul 1992

5340-12-313-5565
Metal Runner

123135565
C104-A24-C24: RNCC: 2 | RNVC: 2
C104-A24-C24: RNCC: 3 | RNVC: 2

15 Apr 1988

5340-12-346-3355
Manual Control Handle

123463355
51364200: RNCC: 3 | RNVC: 2

13 Jul 1998

5340-12-390-0620
Mounting Plate

123900620
T439D4001201: RNCC: 3 | RNVC: 2

28 Sep 2012

5340-12-375-0858
Mending Plate

123750858
L281M2003217: RNCC: 3 | RNVC: 2

21 Apr 2008

5340-12-370-9496
Ball Socket Seat

123709496
145100-1: RNCC: 3 | RNVC: 2
145100-1: RNCC: 5 | RNVC: 2

19 Jan 2007

5340-12-166-9770
Bow Handle

121669770
VG95149A200STCR-SCHRAUBE-SCHEIBE: RNCC: 2 | RNVC: 2
370-10-70: RNCC: 3 | RNVC: 2
270-7: RNCC: 3 | RNVC: 2

6 Nov 1976

5340-12-348-4525
Access Cover

123484525
G10-74-110-10-0: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-12-700-9145
Mounting Bracket

127009145
VG95211-ML-127009145: RNCC: 2 | RNVC: 2
2.24.7210.0201.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-151-2282
Rod End Clevis

121512282
1344-41-05-00-05: RNCC: 3 | RNVC: 2
1344-01-05-00-06LINKS: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-366-6620
Rim Latch Set

123666620
16007100: RNCC: 3 | RNVC: 2

20 May 2005

5340-12-359-7815
Dust And Moisture Seal Protective Cap-Plug

123597815
610U9RAL3000: RNCC: 3 | RNVC: 2
GPN610U9RAL3000: RNCC: 5 | RNVC: 2
610U9RAL3000: RNCC: 5 | RNVC: 2
610U9RAL3000: RNCC: 5 | RNVC: 2

10 Mar 2003

5340-12-310-2803
Double Angle Bracket

123102803
1000104-212400.21: RNCC: 3 | RNVC: 2
1000104-212400.21: RNCC: 5 | RNVC: 9

5 May 1987

5340-12-321-7425
Grooved Clamp Coupling Half

123217425
0515301: RNCC: 3 | RNVC: 2

21 Jun 1990

5340-12-392-7218
Angle Bracket

123927218
117-93813.15: RNCC: 3 | RNVC: 2

2 Jul 2013

5340-12-344-6680
Mounting Plate

123446680
78027 63003: RNCC: 2 | RNVC: 2
7802763003: RNCC: 3 | RNVC: 2
78027 63003: RNCC: 5 | RNVC: 9

26 Nov 1997

5340-12-185-4415
Nonmetallic Bumper

121854415
CF419389: RNCC: 3 | RNVC: 2
CF 419 389: RNCC: 5 | RNVC: 2
CF419389: RNCC: 5 | RNVC: 2
CF 419 389: RNCC: 5 | RNVC: 2
CF419389: RNCC: 5 | RNVC: 2

7 Oct 1980

5340-12-371-9820
Access Cover

123719820
919910: RNCC: 3 | RNVC: 2

6 Jun 2007

5340-12-351-3735
Cushioning Pad

123513735
105-909867.01: RNCC: 3 | RNVC: 2

19 Jul 2000

5340-12-192-2773
Shimmy Damper

121922773
K25206-00: RNCC: 3 | RNVC: 2
K25206-00: RNCC: 5 | RNVC: 9

7 Apr 1982

5340-12-350-3422
Snap Hook

123503422
509-10: RNCC: 3 | RNVC: 9

17 Mar 2000

5340-12-305-5823
Webbing Strap

123055823
5802017-701130.00: RNCC: 2 | RNVC: 2
5802017-701130.00: RNCC: 3 | RNVC: 2
000-B3-20X2,0X110-PE-RAL6031: RNCC: 6 | RNVC: 9

25 Nov 1985

5340-12-365-5871
Angle Bracket

123655871
J29120380-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-308-9656
Cane Bolt

123089656
1747000-290000.00: RNCC: 2 | RNVC: 2
1747000-290000.00: RNCC: 3 | RNVC: 2
4900189-290000.00: RNCC: 5 | RNVC: 2
4900189-290000.00: RNCC: 5 | RNVC: 2

2 Dec 1986

5340-12-186-6170
Buckle

121866170
NO PRIMARY REF 12-186-6170: RNCC: 3 | RNVC: 2
X01023: RNCC: 5 | RNVC: 2
0297C17MM: RNCC: 5 | RNVC: 9

21 Jan 1981

5340-12-300-9177
Spring Tension Clip

123009177
1423-320.07(4): RNCC: 3 | RNVC: 2

12 Sep 1984

5340-12-337-4722
Loop Clamp

123374722
0376 4956: RNCC: 2 | RNVC: 2
0376 4956: RNCC: 3 | RNVC: 2
376 4956 UE 3481-63: RNCC: 5 | RNVC: 2
376.4956UE3481-63: RNCC: 5 | RNVC: 2

8 Mar 1995

5340-12-325-2603
Webbing Strap

123252603
5802233-010600.002: RNCC: 2 | RNVC: 2
7800011602: RNCC: 3 | RNVC: 2
5802233-010600.002: RNCC: 3 | RNVC: 2
78000 11602: RNCC: 5 | RNVC: 9
5802233-010600.002: RNCC: 5 | RNVC: 9
000-E1-20X1,2X1800-PE-RAL6031: RNCC: 6 | RNVC: 9

23 May 1991

5340-12-187-1011
Retaining Strap

121871011
5801338-03-003: RNCC: 3 | RNVC: 2
5801338-03.003: RNCC: 5 | RNVC: 2

5 Mar 1981

5340-12-332-0560
Nut And Bolt Locking Plate

123320560
480-4351-05-00-23: RNCC: 3 | RNVC: 2
480/4351-05-00-23: RNCC: 5 | RNVC: 2

20 Jul 1993

5340-12-302-6156
Helical Compression Spring Retainer

123026156
YK03515198: RNCC: 3 | RNVC: 2
03515198: RNCC: 5 | RNVC: 9
H.B.913SV 1056 1975 03 51 5198: RNCC: 5 | RNVC: 9

17 Jan 1985

5340-12-189-4001
Catch Strike

121894001
CF 419 028 A: RNCC: 3 | RNVC: 2
CF 419 028 A: RNCC: 5 | RNVC: 2
CF419028A: RNCC: 5 | RNVC: 2
CF419028A: RNCC: 5 | RNVC: 2

24 Sep 1981

5340-12-343-6463
Butt Hinge

123436463
PAN2403B: RNCC: 3 | RNVC: 2
PAN2403 B: RNCC: 5 | RNVC: 2

10 Jul 1997

5340-12-325-0392
Quick Release Plunger

123250392
7,5CZN680: RNCC: 3 | RNVC: 2
3.989: RNCC: 5 | RNVC: 2

24 Apr 1991

5340-12-309-3282
Furniture Glide

123093282
KU F 22A: RNCC: 3 | RNVC: 2
5466441: RNCC: 5 | RNVC: 2

15 Jan 1987

5340-12-322-8272
Angle Bracket

123228272
54.4.257.0014: RNCC: 2 | RNVC: 2
SP07863: RNCC: 3 | RNVC: 2
54.4.257.0014: RNCC: 5 | RNVC: 9

26 Sep 1990

5340-12-190-2578
Helical Compression Spring Seat

121902578
2420222007: RNCC: 3 | RNVC: 2
2 420 222 007: RNCC: 5 | RNVC: 2

16 Nov 1981

5340-12-348-0678
Angle Bracket

123480678
58R059-84419-1: RNCC: 2 | RNVC: 2
58R059-84419-1: RNCC: 3 | RNVC: 2

8 Apr 1999

5340-12-310-6483
Metal Runner

123106483
6 110 304 136: RNCC: 3 | RNVC: 2
6 1103 041 36-4: RNCC: 5 | RNVC: 2

12 Jun 1987

5340-12-198-4317
Strap Fastener Loop

121984317
2500138-120000.06: RNCC: 2 | RNVC: 2
2500138-120000.06: RNCC: 3 | RNVC: 2
2500138-120000.06: RNCC: 5 | RNVC: 9
2500138-120000.06: RNCC: 5 | RNVC: 9

27 Jan 1984

5340-12-171-5763
Butt Hinge

121715763
81972016025: RNCC: 3 | RNVC: 2
9311: RNCC: 5 | RNVC: 2
81.97201-6025: RNCC: 5 | RNVC: 2

26 Oct 1977

5340-12-356-0054
Multiple Angle Bracket

123560054
2510-12000668: RNCC: 2 | RNVC: 2
4617911111: RNCC: 3 | RNVC: 2

14 Jan 2002

5340-12-177-3460
Expansion Plug

121773460
DIN443-42-ST-ROH: RNCC: 2 | RNVC: 2
42DIN443: RNCC: 5 | RNVC: 2
42DIN443R0H: RNCC: 5 | RNVC: 2

29 Jan 1979

5340-12-175-8560
Plug Button

121758560
06718190014: RNCC: 3 | RNVC: 2
06.71819-0014: RNCC: 5 | RNVC: 2
060389: RNCC: 5 | RNVC: 2

23 Oct 1978

5340-12-165-3187
Catch Strike

121653187
307.141-10050.07: RNCC: 3 | RNVC: 2
0307141-10050-07: RNCC: 5 | RNVC: 9

9 Apr 1976

5340-12-701-1926
Strap Hinge

127011926
VG95211-ML-127011926: RNCC: 2 | RNVC: 2
5.12.0430.9110.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-394-3209
Bumper

123943209
M-38-030-22.0: RNCC: 3 | RNVC: 2

20 Nov 2013

5340-12-313-7240
Nonmetallic Bumper

123137240
WW 492 076: RNCC: 2 | RNVC: 2
82200-WW492076.CR45: RNCC: 3 | RNVC: 2
WW 492 076: RNCC: 3 | RNVC: 9
WW 492 076: RNCC: 5 | RNVC: 2

29 Apr 1988

5340-12-352-6323
Webbing Strap

123526323
8310-0010: RNCC: 3 | RNVC: 2

1 Dec 2000

5340-12-347-6265
Metal Grille

123476265
5034.02.02.00: RNCC: 2 | RNVC: 2
5034.02.02.00: RNCC: 3 | RNVC: 2

18 Jan 1999

5340-12-337-1553
Rim Lock

123371553
3051 101: RNCC: 3 | RNVC: 2
3051101: RNCC: 5 | RNVC: 2
3051 101: RNCC: 5 | RNVC: 9
3051101: RNCC: 5 | RNVC: 9

26 Jan 1995

5340-12-320-1333
Kunst Gleitschiene

123201333
0679401: RNCC: 3 | RNVC: 2

11 Dec 1989

5340-12-183-2590
Mounting Bracket

121832590
43709471-601: RNCC: 3 | RNVC: 2

28 Mar 1980

5340-12-330-0495
Loop Clamp

123300495
3334 WEISZ: RNCC: 3 | RNVC: 2

27 Oct 1992

5340-12-189-7286
Nut And Bolt Locking Plate

121897286
52-56625-4: RNCC: 3 | RNVC: 2

19 Oct 1981

5340-12-318-8685
Mending Plate

123188685
702-710000-901-0: RNCC: 3 | RNVC: 2

22 Aug 1989

5340-12-121-2055
S Sicherungsplatte

5340-12-184-1892
Clamping Catch

121841892
055129635: RNCC: 3 | RNVC: 2

3 Jul 1980

5340-12-321-4957
Lock-Release Lever

123214957
0000 1026 059: RNCC: 3 | RNVC: 2

23 May 1990

5340-12-389-2561
Antipilferage Seal Locking Wire

123892561
5000161850: RNCC: 3 | RNVC: 2
CV135754: RNCC: 5 | RNVC: 2
0161850: RNCC: 5 | RNVC: 9

13 Jun 2012

5340-12-389-0986
Dust And Moisture Seal Protective Cap-Plug

123890986
BRE.4S.200.NAS.495: RNCC: 3 | RNVC: 2

25 May 2012

5340-12-322-8517
Bow Handle

123228517
0155978: RNCC: 3 | RNVC: 2

28 Sep 1990

5340-12-357-9189
Mounting Bracket

123579189
2300415-250103.000: RNCC: 2 | RNVC: 2
2300415-250103.000: RNCC: 3 | RNVC: 2

14 Aug 2002

5340-12-313-4633
Nonmetallic Bumper

123134633
200.682: RNCC: 3 | RNVC: 2

1 Apr 1988

5340-12-162-6044
Spring Tension Clip

121626044
2241328701: RNCC: 3 | RNVC: 2
22413 28701: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-383-5040
Bumper

123835040
017132-060X150: RNCC: 3 | RNVC: 2

29 Oct 2010

5340-12-393-8175
Locking Stay

123938175
160-82175: RNCC: 3 | RNVC: 2

14 Oct 2013

5340-12-180-4571
Resilient Mount

121804571
GE1450: RNCC: 3 | RNVC: 2
C121-Z1-C56: RNCC: 5 | RNVC: 2
C121Z1C56: RNCC: 5 | RNVC: 2
GE1450: RNCC: 5 | RNVC: 9

12 Sep 1979

5340-12-164-4139
Pipe Bracket

121644139
SPGU6087.096/25SK: RNCC: 3 | RNVC: 2
2460200560: RNCC: 5 | RNVC: 2
5077 209 031: RNCC: 5 | RNVC: 2
1616087096: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-199-5329
Lock-Release Lever

121995329
2300088-411133.00: RNCC: 2 | RNVC: 2
2300088-411133.00: RNCC: 3 | RNVC: 2
2300088-411133.00: RNCC: 5 | RNVC: 9
9846696: RNCC: 5 | RNVC: 9
2300088-411133-00: RNCC: 5 | RNVC: 9

9 May 1984

5340-12-313-3285
Webbing Strap

123133285
1900037-70-06: RNCC: 2 | RNVC: 2
352851: RNCC: 3 | RNVC: 2

22 Mar 1988

5340-12-178-3002
Extension Drawer Slide Section

121783002
C106-A44-C104: RNCC: 2 | RNVC: 2
C106A44C104: RNCC: 3 | RNVC: 2
C106-A44-C104: RNCC: 5 | RNVC: 2
C106A44C104: RNCC: 5 | RNVC: 2
C106-A44-C104: RNCC: 5 | RNVC: 2

12 Apr 1979

5340-12-349-2842
Butt Hinge Leaf

123492842
J52423621-001: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-12-305-9930
Mending Plate

123059930
5801761-000000.003: RNCC: 2 | RNVC: 2
5801761-000000.003: RNCC: 3 | RNVC: 2

17 Jan 1986

5340-12-178-9256
Angle Bracket

121789256
10502-01: RNCC: 3 | RNVC: 2
477217: RNCC: 5 | RNVC: 2

25 May 1979

5340-12-384-8729
Helical Compression Spring Retainer

123848729
F1.1189-40-10-10.00-06: RNCC: 3 | RNVC: 2

6 Apr 2011

5340-12-369-1203
Headless Straight Rod

123691203
13-002-000: RNCC: 3 | RNVC: 2

24 May 2006

5340-12-353-4665
Dust And Moisture Seal Protective Cap

123534665
VG95211-ML-123534665: RNCC: 2 | RNVC: 2
49432: RNCC: 3 | RNVC: 2

28 Mar 2001

5340-12-300-2999
Angle Bracket

123002999
E3676-0000-0002: RNCC: 3 | RNVC: 2
3676-0000-0002: RNCC: 5 | RNVC: 2

21 Jul 1984

5340-12-302-1667
Mending Plate

123021667
1201-08.04.03: RNCC: 3 | RNVC: 2
1201-08-04-03: RNCC: 5 | RNVC: 2

6 Dec 1984

5340-12-164-7969
Butt Hinge Leaf

121647969
160-73417-01: RNCC: 3 | RNVC: 2
160-73417-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-322-9324
Mounting Bracket

123229324
704-163502-000-0: RNCC: 3 | RNVC: 2

9 Oct 1990

5340-12-167-3846
Spring Tension Clip

121673846
F7-20-1-5-1-1: RNCC: 3 | RNVC: 2

16 Dec 1976

5340-12-188-9457
Detent Plunger

121889457
2500075-191150.003.0: RNCC: 2 | RNVC: 2
2500075-191150.003.0: RNCC: 3 | RNVC: 2
2500075-191150-003-0: RNCC: 5 | RNVC: 9
2500075-191150.003.0: RNCC: 5 | RNVC: 9
2500075-191150-003-0: RNCC: 5 | RNVC: 9

11 Aug 1981

5340-12-701-5784
Mounting Bracket

127015784
VG95211-ML-127015784: RNCC: 2 | RNVC: 2
5.12.6405.0330.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-332-4944
Hand Crank

123324944
02-10-010-15-01-A: RNCC: 3 | RNVC: 2
02-10-010-15-01A: RNCC: 5 | RNVC: 2

17 Aug 1993

5340-12-317-0287
Angle Bracket

123170287
5802196-20000.003: RNCC: 2 | RNVC: 2
5802196-20000.003: RNCC: 3 | RNVC: 2

6 Mar 1989

5340-12-309-0651
Angle Bracket

123090651
P-245135-753: RNCC: 3 | RNVC: 2
P245135-753: RNCC: 5 | RNVC: 2

11 Dec 1986

5340-12-317-2892
Butt Hinge Leaf

123172892
714-001602-904-0: RNCC: 3 | RNVC: 2

28 Mar 1989

5340-12-386-6246
Butt Hinge

123866246
V6520-06871-217: RNCC: 3 | RNVC: 2

16 Sep 2011

5340-12-364-4935
Loop Clamp

123644935
DIN3016-1-D1-8X9-W1-EPDM: RNCC: 2 | RNVC: 2
RSGU1.8/9-W1: RNCC: 3 | RNVC: 2

1 Oct 2004

5340-12-181-2254
Access Cover

121812254
1200017-110000.8: RNCC: 3 | RNVC: 2
1200017-110000-8: RNCC: 5 | RNVC: 2
1200017-110000-8: RNCC: 5 | RNVC: 9
1200017-110000.8: RNCC: 5 | RNVC: 9

5 Nov 1979

5340-12-161-0572
Retaining Strap

121610572
160-25794-10: RNCC: 3 | RNVC: 2
160-25794-10: RNCC: 5 | RNVC: 2
160-25794-10: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-317-2366
Mounting Plate

123172366
5-440-620: RNCC: 3 | RNVC: 2
440 620: RNCC: 5 | RNVC: 9

20 Mar 1989

5340-12-360-6988
Bow Handle

123606988
R3-1208804: RNCC: 3 | RNVC: 2

1 Jul 2003

5340-12-356-1226
Mounting Bracket

123561226
2339-170020A00C: RNCC: 3 | RNVC: 2

24 Jan 2002

5340-12-388-0107
Mounting Bracket

123880107
SK1239-186510.000.0: RNCC: 3 | RNVC: 2

15 Feb 2012

5340-12-331-1832
Mounting Plate

123311832
702-445200-951-0: RNCC: 3 | RNVC: 2

30 Mar 1993

5340-12-701-6123
Mounting Bracket

127016123
VG95211-ML-127016123: RNCC: 2 | RNVC: 2
5.12.7010.1460.04: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-302-4754
Strap Fastener Loop

123024754
3200026: RNCC: 3 | RNVC: 2
520576: RNCC: 5 | RNVC: 2
320K0057-000-00.3: RNCC: 5 | RNVC: 2
0009884683: RNCC: 5 | RNVC: 2

4 Jan 1985

5340-12-366-7620
Rod End Connector

123667620
504-122152.000: RNCC: 2 | RNVC: 2
504-122152.000: RNCC: 3 | RNVC: 2

6 Jun 2005

5340-12-169-2039
Angle Bracket

121692039
39-1438: RNCC: 3 | RNVC: 2
WW411230C: RNCC: 3 | RNVC: 2
WW411230B: RNCC: 5 | RNVC: 2
WW411230C: RNCC: 5 | RNVC: 2
WW 411 230 B: RNCC: 5 | RNVC: 2
WW411230C: RNCC: 5 | RNVC: 2
WW411230B: RNCC: 5 | RNVC: 2
WW 411 230 C: RNCC: 5 | RNVC: 2
WW411230B: RNCC: 5 | RNVC: 2

22 Apr 1977

5340-12-171-2558
Bow Handle

121712558
VG95149B73,5X37GAL-SW: RNCC: 2 | RNVC: 2
10501-010 SCHWARZ: RNCC: 3 | RNVC: 2
5800583-094200.006: RNCC: 5 | RNVC: 2
5800583-094200-006: RNCC: 5 | RNVC: 2

21 Sep 1977

5340-12-384-5868
Mounting Bracket

123845868
10321-000100.001.0: RNCC: 2 | RNVC: 2
10321-000100.001.0: RNCC: 3 | RNVC: 2

10 Mar 2011

5340-12-329-4802
Nonmetallic Bumper

123294802
A-616777-007: RNCC: 3 | RNVC: 2
A616777-007: RNCC: 5 | RNVC: 2

22 Aug 1992

5340-12-701-7018
Angle Bracket

127017018
VG95211-ML-127017018: RNCC: 2 | RNVC: 2
5.12.7240.1110.07: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-181-6696
Dust And Moisture Seal Protective Cap-Plug

121816696
610U33: RNCC: 3 | RNVC: 2
GPN610U33: RNCC: 5 | RNVC: 2
FA09473: RNCC: 5 | RNVC: 2
GPN610U33: RNCC: 5 | RNVC: 2
15-719: RNCC: 5 | RNVC: 2
90-04487-6: RNCC: 5 | RNVC: 2
GPN610,U33: RNCC: 5 | RNVC: 9
U33GPN610: RNCC: 5 | RNVC: 9
610003300: RNCC: 5 | RNVC: 9
U33: RNCC: 5 | RNVC: 9

10 Dec 1979

5340-12-347-4793
Door Closer

123474793
DLF2R-X30.10: RNCC: 3 | RNVC: 2
DLF2RX=30.10: RNCC: 5 | RNVC: 9

15 Dec 1998

5340-12-701-5254
Angle Bracket

127015254
VG95211-ML-127015254: RNCC: 2 | RNVC: 2
5.12.6101.8000.15: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-6582
Angle Bracket

127016582
VG95211-ML-127016582: RNCC: 2 | RNVC: 2
5.12.7209.1006.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-703-3245
Butt Hinge

127033245
VG95211-ML-127033245: RNCC: 2 | RNVC: 2
5.12.7240.2313.98: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-177-6465
Manual Control Handle

121776465
29-070-11MM: RNCC: 3 | RNVC: 2
5500-322-012-0: RNCC: 5 | RNVC: 2

12 Feb 1979

5340-12-702-5583
Mounting Plate

127025583
VG95211-ML-127025583: RNCC: 2 | RNVC: 2
5.51.7240.0510.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-177-3461
Dust And Moisture Seal Protective Cap

121773461
81964100197: RNCC: 3 | RNVC: 2
81.96410-0197: RNCC: 5 | RNVC: 2

29 Jan 1979

5340-12-330-3568
Door Button

123303568
307-0301-00-24: RNCC: 3 | RNVC: 2
2912 715 00046: RNCC: 5 | RNVC: 2

5 Dec 1992

5340-12-163-5067
Retaining Strap

121635067
23290-041000-001: RNCC: 2 | RNVC: 2
23290-041000.001: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-333-3938
Mending Plate

123333938
3900096-200000.01: RNCC: 2 | RNVC: 2
62 267: RNCC: 3 | RNVC: 2
3900096-200000.01: RNCC: 5 | RNVC: 2

10 Dec 1993

5340-12-355-9495
Blank Panel

123559495
J92220318-401: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-12-363-1176
Spring Loaded Cylinder Fastener

123631176
GN612-12-BK: RNCC: 3 | RNVC: 2

5 May 2004

5340-12-333-0022
Runner

123330022
5900046-1200.07: RNCC: 2 | RNVC: 2
21-1200-07: RNCC: 3 | RNVC: 2
21-1200.07: RNCC: 3 | RNVC: 2
21-1200-07: RNCC: 5 | RNVC: 9
21-1200.07: RNCC: 5 | RNVC: 9

20 Oct 1993

5340-12-381-9782
Hasp Staple

123819782
02.0737.01: RNCC: 3 | RNVC: 2

22 Apr 2010

5340-12-393-0111
Dust And Moisture Seal Protective Cap-Plug

123930111
S252M2030201: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-12-389-1489
Expansion Shield

123891489
924213: RNCC: 3 | RNVC: 2
07402070: RNCC: 5 | RNVC: 2
2500601456: RNCC: 5 | RNVC: 2
924213: RNCC: 5 | RNVC: 2

30 May 2012

5340-12-122-6316
Pipe Bracket

121226316
4045460575: RNCC: 3 | RNVC: 2
644041100100: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-190-5655
Mending Plate

121905655
8474472: RNCC: 3 | RNVC: 2
0913-700: RNCC: 5 | RNVC: 2

7 Dec 1981

5340-12-385-4727
Padlock

123854727
0005830595: RNCC: 3 | RNVC: 2

7 Jun 2011

5340-12-393-9510
Mechanical Stop

123939510
68583100: RNCC: 3 | RNVC: 2

24 Oct 2013

5340-12-394-0384
Loop Clamp

123940384
3650.0423: RNCC: 3 | RNVC: 2
3650.0423: RNCC: 5 | RNVC: 2

31 Oct 2013

5340-12-373-4501
Retaining Band

123734501
01180652: RNCC: 3 | RNVC: 2

5 Nov 2007

5340-12-383-2763
Dust And Moisture Seal Protective Plug

123832763
GPN 300 F19 GRAU: RNCC: 3 | RNVC: 2

30 Sep 2010

5340-12-331-7661
Butt Hinge Leaf

123317661
10341001: RNCC: 2 | RNVC: 2
10341001: RNCC: 3 | RNVC: 2
EZ103410: RNCC: 5 | RNVC: 2

18 Jun 1993

5340-12-319-2220
Clamping Catch

123192220
461.022.000: RNCC: 3 | RNVC: 2
373.54540: RNCC: 5 | RNVC: 2
54540: RNCC: 5 | RNVC: 9

14 Sep 1989

5340-12-128-0844

5340-12-133-5815

5340-12-302-0268
Metal Runner

123020268
1361013-14144.00: RNCC: 3 | RNVC: 2
1361013-14144-00: RNCC: 5 | RNVC: 2

28 Nov 1984

5340-12-184-7735
Double Angle Bracket

121847735
181260839A: RNCC: 3 | RNVC: 2
5801315-0000-023: RNCC: 5 | RNVC: 2
5801315-0000.023: RNCC: 5 | RNVC: 2
5801315-0000.023: RNCC: 5 | RNVC: 9

16 Aug 1980

5340-12-195-9744
Angle Bracket

121959744
160-24255-02: RNCC: 3 | RNVC: 2
160-24255-02: RNCC: 5 | RNVC: 9

10 May 1983

5340-12-174-0926
Nonmetallic Bumper

121740926
VG95092B20X10X42PUR60: RNCC: 2 | RNVC: 2
82200-B20X10X42.PUR60: RNCC: 3 | RNVC: 2
B20X10X42.60PUR: RNCC: 5 | RNVC: 2
81960200162: RNCC: 5 | RNVC: 2

6 Jun 1978

5340-12-158-2888
Electrical-Mechanical Equipment Post

121582888
512201-2322.000: RNCC: 3 | RNVC: 2
512201-2322: RNCC: 5 | RNVC: 2
6736-12225-46: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-309-4824
Electrical-Mechanical Equipment Post

123094824
VG95148C5,5XM4X7-ST: RNCC: 2 | RNVC: 2
VG95148C5,5XM4X7-ST: RNCC: 3 | RNVC: 2
70.1200.215-08: RNCC: 3 | RNVC: 2

28 Jan 1987

5340-12-372-6048
Cushioning Pad

123726048
1866 2144-008: RNCC: 3 | RNVC: 2
1866 2144-008: RNCC: 5 | RNVC: 2

2 Aug 2007

5340-12-362-6214
Nonmetallic Bumper

123626214
12.7382-01-11-00.00-28: RNCC: 2 | RNVC: 2
12.7382-01-11-00.00-28: RNCC: 3 | RNVC: 2

12 Mar 2004

5340-12-176-5311
Spring Tension Clip

121765311
WW4260790R: RNCC: 3 | RNVC: 9
WW 426 079 -R: RNCC: 5 | RNVC: 2
WW4260790R: RNCC: 5 | RNVC: 2
WW 426 079 -R: RNCC: 5 | RNVC: 9

5 Dec 1978

5340-12-192-7024
Retaining Strap

121927024
LN29836 B1-25: RNCC: 2 | RNVC: 2
LN29836B1-25: RNCC: 5 | RNVC: 2

17 May 1982

5340-12-301-6073
Angle Bracket

123016073
2300107-310600: RNCC: 2 | RNVC: 2
2300107-310600: RNCC: 3 | RNVC: 2
2300107-310600: RNCC: 5 | RNVC: 9
2300107-310600: RNCC: 5 | RNVC: 9

26 Oct 1984

5340-12-301-7716
Metal Runner

123017716
2300107-310512: RNCC: 2 | RNVC: 2
2300107-310512: RNCC: 3 | RNVC: 2
2300107-310512: RNCC: 5 | RNVC: 9
2300107-310512: RNCC: 5 | RNVC: 9

8 Nov 1984

5340-12-303-0448
Loop Clamp

123030448
535048-8016: RNCC: 3 | RNVC: 2
535048-8016: RNCC: 5 | RNVC: 9
535048-8016.000: RNCC: 5 | RNVC: 9

22 Feb 1985

5340-12-172-8878
Catch Strike

121728878
23110-4106.05: RNCC: 2 | RNVC: 2
23110-4106-05: RNCC: 3 | RNVC: 2
23110-4106-05: RNCC: 5 | RNVC: 9
23110-4106-05: RNCC: 5 | RNVC: 9

2 Mar 1978

5340-12-701-7471
Angle Bracket

127017471
VG95211-ML-127017471: RNCC: 2 | RNVC: 2
5.12.7614.8770.05: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-188-6099
Angle Bracket

121886099
5801758-3310.00: RNCC: 2 | RNVC: 2
5801758-3310.00: RNCC: 3 | RNVC: 2
5801758-3310-00: RNCC: 5 | RNVC: 9
5801758-3310.00: RNCC: 5 | RNVC: 9
5801758-3310-00: RNCC: 5 | RNVC: 9

21 Jul 1981

5340-12-365-1717
Butt Hinge Leaf

123651717
5981-185810.001.0: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-12-319-5430
Bow Handle

123195430
2300285-187003.000.0: RNCC: 2 | RNVC: 2
2300285-187003.000.0: RNCC: 3 | RNVC: 2
1275790: RNCC: 5 | RNVC: 2

11 Oct 1989

5340-12-198-7730
Rod End Connector

121987730
1200074-1111 00.004: RNCC: 2 | RNVC: 2
009-083.121-004: RNCC: 3 | RNVC: 2
1200074-1111 00.004: RNCC: 5 | RNVC: 9

24 Feb 1984

5340-12-322-5061
Mounting Bracket

123225061
076-121111-000-0: RNCC: 2 | RNVC: 2
076-121111-000-0: RNCC: 3 | RNVC: 2

28 Aug 1990

5340-12-383-4137
Lock-Release Lever

123834137
2001452: RNCC: 3 | RNVC: 2
01-200.12-01.00-00: RNCC: 5 | RNVC: 2

18 Oct 2010

5340-12-365-3269
Mounting Plate

123653269
5160-311120A05B: RNCC: 2 | RNVC: 2
5160-311120A05B: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-12-391-5885
Mounting Bracket

123915885
I010002TAN686A: RNCC: 3 | RNVC: 2

20 Mar 2013

5340-12-165-4618
Retaining Strap

121654618
160-740205: RNCC: 3 | RNVC: 2
160-740205: RNCC: 5 | RNVC: 9

18 May 1976

5340-12-301-5321
Access Cover

123015321
5502040403: RNCC: 3 | RNVC: 2
5502040403: RNCC: 5 | RNVC: 2
5502040403: RNCC: 5 | RNVC: 2

23 Oct 1984

5340-12-387-9287
Mounting Bracket

123879287
7093760: RNCC: 3 | RNVC: 2

9 Feb 2012

5340-12-366-0497
Dust And Moisture Seal Protective Cap

123660497
06264-999.001: RNCC: 3 | RNVC: 2

3 Mar 2005

5340-12-312-0148
Clamping Catch

123120148
600012489: RNCC: 3 | RNVC: 2
81.97106.2009: RNCC: 5 | RNVC: 2
81971062009: RNCC: 5 | RNVC: 2

10 Nov 1987

5340-12-362-4096
Access Cover

123624096
1605500206: RNCC: 3 | RNVC: 2
1 605 500 206: RNCC: 5 | RNVC: 2

18 Feb 2004

5340-12-166-6526
Rod End Clevis

121666526
WW405951A: RNCC: 3 | RNVC: 9
WW 405 951 A: RNCC: 5 | RNVC: 2
WW405951A: RNCC: 5 | RNVC: 2
WW 405 951 A: RNCC: 5 | RNVC: 9

30 Sep 1976

5340-12-341-7640
Metallic Bumper

123417640
2500255-322700.04.0: RNCC: 2 | RNVC: 2
2500255-322700.04.0: RNCC: 3 | RNVC: 2

24 Oct 1996

5340-12-361-4576
Access Cover

123614576
2500262-744200.000.0: RNCC: 2 | RNVC: 2
2500262-744200.000.0: RNCC: 3 | RNVC: 2

6 Oct 2003

5340-12-322-4549
Access Cover

123224549
8100397-281-08: RNCC: 2 | RNVC: 2
8100397-281-08: RNCC: 3 | RNVC: 2

23 Aug 1990

5340-12-326-7830
Webbing Strap

123267830
902985-101: RNCC: 3 | RNVC: 2

24 Oct 1991

5340-12-333-6495
Spacing Threaded Standoff

123336495
C41107-A465-C37: RNCC: 3 | RNVC: 2
VG95148C5XM2,5X10,3-NRST-4,0MM: RNCC: 5 | RNVC: 2

18 Jan 1994

5340-12-336-4917
Strap Fastener Loop

123364917
58R059-3241: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-12-702-1904
Mounting Plate

127021904
VG95211-ML-127021904: RNCC: 2 | RNVC: 2
30.7209.40: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-702-4236
Angle Bracket

127024236
VG95211-ML-127024236: RNCC: 2 | RNVC: 2
5.12.7206.1780.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-366-6634
Loop Clamp

123666634
DIN3567-A49: RNCC: 2 | RNVC: 2

20 May 2005

5340-12-190-6703
Webbing Strap

121906703
5801435-010400.00: RNCC: 2 | RNVC: 2
5801435-010400.00: RNCC: 3 | RNVC: 2
5801435-010400-00: RNCC: 5 | RNVC: 9
000-C1-25X2,5X320-BW-RAL6031: RNCC: 6 | RNVC: 9

8 Dec 1981

5340-12-342-9761
Angle Bracket

123429761
5058-091: RNCC: 3 | RNVC: 2

18 Apr 1997

5340-12-381-2942
Mending Plate

123812942
424-12-SK2: RNCC: 3 | RNVC: 2
4250473101094: RNCC: 5 | RNVC: 2

29 Jan 2010

5340-12-369-7858
Manual Control Handle

123697858
AFG074228-01: RNCC: 3 | RNVC: 2

16 Aug 2006

5340-12-310-0091
Access Door

123100091
23305-185300.00.0: RNCC: 2 | RNVC: 2
23305-185300.00.0: RNCC: 3 | RNVC: 2
23305-185310-00-0: RNCC: 5 | RNVC: 9

27 Mar 1987

5340-12-700-9048
Retaining Bail

127009048
VG95211-ML-127009048: RNCC: 2 | RNVC: 2
2.11.7210.8692.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-171-5141
Angle Bracket

121715141
23230-064000.001.0: RNCC: 2 | RNVC: 2
81974860197: RNCC: 3 | RNVC: 2
81.97486-0197: RNCC: 5 | RNVC: 2
23230-064000-001-0: RNCC: 5 | RNVC: 9
23230-064000.001.0: RNCC: 5 | RNVC: 9

20 Oct 1977

5340-12-306-1029
Resilient Mount

123061029
DIN95363-C75X55-NR40AMMS: RNCC: 2 | RNVC: 2
011556E: RNCC: 5 | RNVC: 2
1.75.55.2.40NR/AMMS: RNCC: 5 | RNVC: 2
811.020.075.055.12.NR40.AMMS: RNCC: 5 | RNVC: 2
81120-75X55-M12.NR40.AMMS: RNCC: 5 | RNVC: 2
VG95363-C75X55-NR40AMMS: RNCC: 5 | RNVC: 9

27 Jan 1986

5340-12-373-6538
Retaining Strap

123736538
X88199100040: RNCC: 3 | RNVC: 2

26 Nov 2007

5340-12-158-8954
Butt Hinge Leaf

121588954
1014164: RNCC: 3 | RNVC: 2
1B7-15-030-01-3: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-380-7669
Mounting Bracket

123807669
3010853: RNCC: 3 | RNVC: 2

26 Nov 2009

5340-12-306-3575
Double Angle Bracket

123063575
A-296710-135: RNCC: 3 | RNVC: 2
A296710-135: RNCC: 5 | RNVC: 2

24 Feb 1986

5340-12-317-4195
Mounting Plate

123174195
P-145502-009: RNCC: 3 | RNVC: 2
P145502-009: RNCC: 5 | RNVC: 2

6 Apr 1989

5340-12-702-4610
Mounting Bracket

127024610
VG95211-ML-127024610: RNCC: 2 | RNVC: 2
5.51.0603.1102.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-5598
Mounting Bracket

127015598
VG95211-ML-127015598: RNCC: 2 | RNVC: 2
5.12.6114.0111.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-338-1337
Access Cover

123381337
160-75854: RNCC: 3 | RNVC: 2
15160-75854: RNCC: 5 | RNVC: 2
160-75854: RNCC: 5 | RNVC: 9

29 May 1995

5340-12-702-5766
Mounting Bracket

127025766
VG95211-ML-127025766: RNCC: 2 | RNVC: 2
5.51.7801.0102.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-346-4775
Mounting Bracket

123464775
2300348-183230.001.0: RNCC: 2 | RNVC: 2
2300348-183230.001.0: RNCC: 3 | RNVC: 2
1807053: RNCC: 5 | RNVC: 2

29 Jul 1998

5340-12-341-0277
Access Cover

123410277
2500262-195900.000.0: RNCC: 2 | RNVC: 2
2500262-195900.000.0: RNCC: 3 | RNVC: 2

18 Jul 1996

5340-12-325-8855
Webbing Strap

123258855
79017/026-0700-0250: RNCC: 3 | RNVC: 2
79017/026-0700-0250: RNCC: 5 | RNVC: 9

18 Jul 1991

5340-12-389-1732
Turnbuckle Body

123891732
DIN1478-SP-M8-A3P: RNCC: 2 | RNVC: 2

31 May 2012

5340-12-362-9069
Access Cover

123629069
B11-0065-002: RNCC: 3 | RNVC: 2

14 Apr 2004

5340-12-184-4183
Nonmetallic Bumper

121844183
5801357-2440.04: RNCC: 2 | RNVC: 2
5801357-2440.04: RNCC: 3 | RNVC: 2
5801357-2440.04: RNCC: 3 | RNVC: 2
5801357-2440-04: RNCC: 5 | RNVC: 2
5801357-2440-04: RNCC: 5 | RNVC: 2
5801357-2440-04: RNCC: 5 | RNVC: 9

24 Jul 1980

5340-12-328-9827
Turnbuckle Body

123289827
6937-420: RNCC: 3 | RNVC: 2

4 Jul 1992

5340-12-171-5167
Spring Tension Clip

121715167
2360-186000.09.0: RNCC: 2 | RNVC: 2
2360-186000.09.0: RNCC: 5 | RNVC: 2
2360-186000.09.0: RNCC: 5 | RNVC: 2
2360-186000-09-0: RNCC: 5 | RNVC: 9
2360-186000.09.0: RNCC: 5 | RNVC: 9

20 Oct 1977

5340-12-178-2288
Mending Plate

121782288
C106-A44-C107: RNCC: 2 | RNVC: 2
C106A44C107: RNCC: 3 | RNVC: 2
C106-A44-C107: RNCC: 5 | RNVC: 2
C106A44C107: RNCC: 5 | RNVC: 2
C106-A44-C107: RNCC: 5 | RNVC: 2

9 Apr 1979

5340-12-177-8255
Access Cover

121778255
2300002-181950.001: RNCC: 2 | RNVC: 2
2300002-181950.001: RNCC: 3 | RNVC: 2
2300002-181950-001: RNCC: 5 | RNVC: 9
2300002-181950.001: RNCC: 5 | RNVC: 9

28 Feb 1979

5340-12-198-5062
Mending Plate

121985062
66.4350.705.03-A001: RNCC: 3 | RNVC: 2
764495: RNCC: 5 | RNVC: 2

3 Feb 1984

5340-12-300-2185
Retaining Strap

123002185
23114-1900.45: RNCC: 2 | RNVC: 2
23114-1900.45: RNCC: 3 | RNVC: 2
23114-1900-45: RNCC: 5 | RNVC: 9
23114-1900-45: RNCC: 5 | RNVC: 9
23114-1900.45: RNCC: 5 | RNVC: 9

14 Jul 1984

5340-12-127-7243
Buckle

121277243
1013-08.03: RNCC: 2 | RNVC: 2
1013-08.03: RNCC: 3 | RNVC: 2
1013-08-03: RNCC: 5 | RNVC: 2
200 580: RNCC: 5 | RNVC: 9
200580: RNCC: 5 | RNVC: 9
1013-08-03: RNCC: 5 | RNVC: 9
200580: RNCC: 8 | RNVC: 2

30 May 1969

5340-12-193-6603
Flush Lock

121936603
5801082-1213.004: RNCC: 3 | RNVC: 2

18 Aug 1982

5340-12-385-8523
Loop Clamp

123858523
2300002-091000.002: RNCC: 2 | RNVC: 2
2300002-091000.002: RNCC: 3 | RNVC: 2
2300002-091000.002: RNCC: 5 | RNVC: 9

13 Jul 2011

5340-12-326-1335
Rod End Clevis

123261335
307.601-60420.05: RNCC: 3 | RNVC: 2
307.601-60420.05: RNCC: 5 | RNVC: 2

12 Aug 1991

5340-12-167-0388
Resilient Mount

121670388
195909114: RNCC: 3 | RNVC: 2
195909114: RNCC: 3 | RNVC: 9
195909114: RNCC: 5 | RNVC: 9

11 Nov 1976

5340-12-307-1984
Dust And Moisture Seal Protective Plug

123071984
RP969272: RNCC: 3 | RNVC: 2

21 May 1986

5340-12-340-4780
Electronic Equipment Hardware Kit

123404780
VS8221G056: RNCC: 3 | RNVC: 2
VS8221G056: RNCC: 5 | RNVC: 9
VS8221G056ST: RNCC: 5 | RNVC: 9

20 Apr 1996

5340-12-317-4212
Mounting Plate

123174212
P-145502-065: RNCC: 3 | RNVC: 2
P145502-065: RNCC: 5 | RNVC: 2

6 Apr 1989

5340-12-166-3531
Angle Bracket

121663531
2360-030000.07.0: RNCC: 2 | RNVC: 2
2360-030000.07.0: RNCC: 3 | RNVC: 2
2360-030000.07.0: RNCC: 3 | RNVC: 2
2360-030000-07-0: RNCC: 5 | RNVC: 2
2360-030000.07.0: RNCC: 5 | RNVC: 2
2360-030000-07-0: RNCC: 5 | RNVC: 9
2360-030000.07.0: RNCC: 5 | RNVC: 9
2360-030000.07.0: RNCC: 5 | RNVC: 9

31 Aug 1976

5340-12-702-4098
Angle Bracket

127024098
VG95211-ML-127024098: RNCC: 2 | RNVC: 2
5.12.6110.0501.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-171-1194
Rod End Connector

121711194
81954900051: RNCC: 3 | RNVC: 2
23230-034001-000-0: RNCC: 5 | RNVC: 9
23230-034001.000.0: RNCC: 5 | RNVC: 9

9 Sep 1977

5340-12-390-7858
Dust And Moisture Seal Protective Cover

123907858
F1.4553-30-01-20.00-01: RNCC: 3 | RNVC: 2

12 Dec 2012

5340-12-387-1204
Webbing Strap

123871204
4100037-981149.002.0: RNCC: 2 | RNVC: 2
4100037-981149.002.0: RNCC: 3 | RNVC: 2

8 Nov 2011

5340-12-330-8790
Detent Plunger

123308790
2433124352: RNCC: 3 | RNVC: 2
2 433 124 352: RNCC: 5 | RNVC: 2
2433124306: RNCC: 5 | RNVC: 2
0000172074: RNCC: 5 | RNVC: 2

18 Feb 1993

5340-12-321-4462
Spring Loaded Cylinder Fastener

123214462
40 0176 651: RNCC: 2 | RNVC: 2
04.LV028.3: RNCC: 3 | RNVC: 2
40 0176 651: RNCC: 5 | RNVC: 2
40 0176 651: RNCC: 5 | RNVC: 9
40 0176 651: RNCC: 5 | RNVC: 9

21 May 1990

5340-12-180-0291
Electrical-Mechanical Equipment Post

121800291
66-3875-360-01A001: RNCC: 3 | RNVC: 2
148451: RNCC: 5 | RNVC: 2
66-3875-360-01: RNCC: 5 | RNVC: 2

17 Aug 1979

5340-12-313-9164
Extension Drawer Slide Section

123139164
1907433: RNCC: 3 | RNVC: 2
75D10.150-03: RNCC: 5 | RNVC: 2

20 May 1988

5340-12-195-1440
Angle Bracket

121951440
100332-58100.05: RNCC: 2 | RNVC: 2
100332-58100.05: RNCC: 3 | RNVC: 2
100332-58100-05: RNCC: 5 | RNVC: 2

17 Jan 1983

5340-12-325-0394
Catch Strike

123250394
5802233-040303.000: RNCC: 2 | RNVC: 2
7800014440: RNCC: 5 | RNVC: 2
5802233-040303.000: RNCC: 5 | RNVC: 9
78000 14440: RNCC: 5 | RNVC: 9

24 Apr 1991

5340-12-324-9262
Plug Button

123249262
12774 PE181S: RNCC: 3 | RNVC: 2
PL-AK12774PE181S: RNCC: 5 | RNVC: 2
12774: RNCC: 5 | RNVC: 2

10 Apr 1991

5340-12-366-1016
Butt Hinge

123661016
DIN7956-50X2,0-30-NR.ST-BK-U: RNCC: 2 | RNVC: 2
DIN7956-50X2,0X6,0-30-NR.ST-BK-U: RNCC: 5 | RNVC: 2

8 Mar 2005

5340-12-301-0048
Angle Bracket

123010048
P-296895-016: RNCC: 3 | RNVC: 2
P296895-016: RNCC: 5 | RNVC: 2

15 Sep 1984

5340-12-188-2744
Resilient Mount

121882744
E1FH 78-02: RNCC: 3 | RNVC: 2
5L3688.001.06: RNCC: 5 | RNVC: 2
E1FH78-02: RNCC: 5 | RNVC: 2
00-4-632-4017: RNCC: 5 | RNVC: 2
E1FH78-02: RNCC: 5 | RNVC: 2
Y29E1FH78-02: RNCC: 5 | RNVC: 2
5L.3688.001.06: RNCC: 5 | RNVC: 2
5L3688-001-06: RNCC: 5 | RNVC: 2
89099501: RNCC: 5 | RNVC: 9
Y29E1FH78-02: RNCC: 5 | RNVC: 9

23 Jun 1981

5340-12-339-7086
Mending Plate

123397086
2500255-190000.017.0: RNCC: 2 | RNVC: 2
2500255-190000.017.0: RNCC: 3 | RNVC: 2

29 Dec 1995

5340-12-354-5376
Angle Bracket

123545376
J92228851-401: RNCC: 3 | RNVC: 2

25 Jul 2001

5340-12-357-0151
Nonmetallic Bumper

123570151
649055: RNCC: 3 | RNVC: 2

24 Apr 2002

5340-12-376-8940
Spring Tension Clip

123768940
241706: RNCC: 3 | RNVC: 2

17 Nov 2008

5340-12-011-5336

5340-12-131-5489

5340-12-337-3657
Leather Strap

123373657
88968016010: RNCC: 3 | RNVC: 2
88.96801.6010: RNCC: 5 | RNVC: 2

21 Feb 1995

5340-12-362-8641
Spring Loaded Cylinder Fastener

123628641
08002634: RNCC: 3 | RNVC: 2

7 Apr 2004

5340-12-347-1017
Retaining Strap

123471017
191253141E: RNCC: 3 | RNVC: 2

27 Oct 1998

5340-12-333-3208
Angle Bracket

123333208
0049-801000A03B: RNCC: 2 | RNVC: 2
0049-801000A03B: RNCC: 3 | RNVC: 2

24 Nov 1993

5340-12-320-4674
Mounting Bracket

123204674
8-4087.00: RNCC: 2 | RNVC: 2
8-4087.00: RNCC: 3 | RNVC: 2
8-4087.00: RNCC: 5 | RNVC: 9

17 Jan 1990

5340-12-361-6764
Door Handle

123616764
R-2000: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-12-348-0000
Angle Bracket

123480000
3727286: RNCC: 3 | RNVC: 2

24 Mar 1999

5340-12-302-7086
Double Angle Bracket

123027086
0289 2444: RNCC: 3 | RNVC: 2
2892444: RNCC: 5 | RNVC: 2
2892444EC0704-77: RNCC: 5 | RNVC: 2

24 Jan 1985

5340-12-027-3426

5340-12-127-5443
Schluessel

121275443
513127200351: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-341-2251
Protection Bellows

123412251
2500262-193800.000.0: RNCC: 2 | RNVC: 2
2500262-193800.000.0: RNCC: 3 | RNVC: 2

10 Aug 1996

5340-12-327-9731
Mounting Plate

123279731
C42080-A32-C23: RNCC: 2 | RNVC: 2
C42080-A32-C23: RNCC: 3 | RNVC: 2

25 Mar 1992

5340-12-702-1852
Angle Bracket

127021852
VG95211-ML-127021852: RNCC: 2 | RNVC: 2
30.7206.210: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-358-5877
Double Angle Bracket

123585877
J27520013-401: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-12-302-7205
Webbing Strap

123027205
A 1301-2050MM: RNCC: 3 | RNVC: 2

25 Jan 1985

5340-12-701-7569
Retaining Strap

127017569
VG95211-ML-127017569: RNCC: 2 | RNVC: 2
5.12.7617.8001.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-326-9153
Electrical-Mechanical Equipment Post

123269153
5800748-2130.015: RNCC: 2 | RNVC: 2
VG95148B5,5XM2,5X25-NRST: RNCC: 2 | RNVC: 2
5800748-2130.015: RNCC: 3 | RNVC: 2
VG95148B5,5XM2,5X25-NRST: RNCC: 3 | RNVC: 2

8 Nov 1991

5340-12-311-1745
Butt Hinge Leaf

123111745
23114-0417.02: RNCC: 2 | RNVC: 2
23114-0417.02: RNCC: 5 | RNVC: 2
23114-0417.02: RNCC: 5 | RNVC: 9

4 Aug 1987

5340-12-386-0918
Expansion Shield

123860918
NO PRIMARY REF 12-386-0918: RNCC: 3 | RNVC: 2
050247: RNCC: 5 | RNVC: 2
O50247: RNCC: 5 | RNVC: 2
2500600655: RNCC: 5 | RNVC: 2

8 Aug 2011

5340-12-304-4939
Nonmetallic Bumper

123044939
20-7320-006: RNCC: 3 | RNVC: 2

24 Jul 1985

5340-12-353-5411
Cushioning Pad

123535411
000000-1013.231: RNCC: 3 | RNVC: 2
000000-1013.231: RNCC: 5 | RNVC: 2
000000-1013.231: RNCC: 5 | RNVC: 9

5 Apr 2001

5340-12-353-8843
Catch Strike

123538843
209427: RNCC: 3 | RNVC: 2

16 May 2001

5340-12-382-2825
Mounting Bracket

123822825
4118453: RNCC: 3 | RNVC: 2

1 Jun 2010

5340-12-701-7324
Mounting Bracket

127017324
VG95211-ML-127017324: RNCC: 2 | RNVC: 2
5.12.7608.0340.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-327-8473
Mounting Plate

123278473
2653-183500.00: RNCC: 2 | RNVC: 2
2653-183500.00: RNCC: 3 | RNVC: 2

12 Mar 1992

5340-12-313-3675
Mending Plate

123133675
2300194-181750.000: RNCC: 3 | RNVC: 2
2300194-181750.000: RNCC: 5 | RNVC: 9
9843649: RNCC: 5 | RNVC: 9
2300194-181750.000: RNCC: 5 | RNVC: 9

25 Mar 1988

5340-12-325-0897
Mounting Bracket

123250897
5421U: RNCC: 3 | RNVC: 2

30 Apr 1991

5340-12-337-7059
Access Cover

123377059
2300231-180111.000.0: RNCC: 2 | RNVC: 2
2300231-180111.000.0: RNCC: 3 | RNVC: 2

30 Mar 1995

5340-12-313-1872
Access Cover

123131872
P-896077-001: RNCC: 3 | RNVC: 2
P896077-001: RNCC: 5 | RNVC: 2

10 Mar 1988

5340-12-341-2142
Mounting Bracket

123412142
2300211-208243.009.0: RNCC: 2 | RNVC: 2
2300211-208243.009.0: RNCC: 3 | RNVC: 2

9 Aug 1996

5340-12-702-4014
Mounting Bracket

127024014
VG95211-ML-127024014: RNCC: 2 | RNVC: 2
5.12.5811.1340.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-4961
Mounting Plate

127014961
VG95211-ML-127014961: RNCC: 2 | RNVC: 2
5.12.5850.1800.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-322-0093
Padlock Set

123220093
2782-009700.001.0: RNCC: 2 | RNVC: 2
2782-009700.001.0: RNCC: 3 | RNVC: 2

17 Jul 1990

5340-12-701-6725
Mounting Plate

127016725
VG95211-ML-127016725: RNCC: 2 | RNVC: 2
5.12.7211.1370.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-145-7377
Snap Hook

121457377
2901000H: RNCC: 3 | RNVC: 2
30-0 BLANK: RNCC: 3 | RNVC: 9
10139-3: RNCC: 5 | RNVC: 9
0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-313-1947
Retaining Strap

123131947
615.06-12-00-00-016: RNCC: 3 | RNVC: 2
111065: RNCC: 5 | RNVC: 2

10 Mar 1988

5340-12-375-3955
Manual Control Lever

123753955
1404004-000.07: RNCC: 2 | RNVC: 2
1404004-000.07: RNCC: 3 | RNVC: 2

28 May 2008

5340-12-316-2960
Nonmetallic Bumper

123162960
6383583: RNCC: 3 | RNVC: 2
837-6383583: RNCC: 5 | RNVC: 2

9 Jan 1989

5340-12-700-2027
Resilient Mount

127002027
51-261547084: RNCC: 2 | RNVC: 2
765-89-SB243: RNCC: 3 | RNVC: 2

5 Nov 1991

5340-12-333-5782
Resilient Mount

123335782
DIN95363-A10X10-NR40ST: RNCC: 2 | RNVC: 2
7008901: RNCC: 5 | RNVC: 2
500007-M4X10.NR40.ST: RNCC: 5 | RNVC: 2
ELASTO-PUFFER-A10X10-M4X10NR40ST: RNCC: 5 | RNVC: 2
VG95363-A10X10-NR40ST: RNCC: 5 | RNVC: 9

6 Jan 1994

5340-12-361-5636
Loop Clamp

123615636
1221 3210: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-12-339-6493
Mounting Bracket

123396493
81679015016: RNCC: 3 | RNVC: 2
81.67901.5016: RNCC: 5 | RNVC: 2

18 Dec 1995

5340-12-389-2073
Mortise Lock

123892073
110241: RNCC: 3 | RNVC: 2

6 Jun 2012

5340-12-346-4594
Retaining Strap

123464594
072571001000: RNCC: 3 | RNVC: 2

28 Jul 1998

5340-12-181-9012
Gummilager

121819012
0019875240: RNCC: 3 | RNVC: 9

21 Dec 1979

5340-12-359-7318
Mending Plate

123597318
S281M2045101: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-179-6001
Resilient Mount

121796001
3605040012: RNCC: 3 | RNVC: 2

11 Jul 1979

5340-12-377-2039
Dust And Moisture Seal Protective Plug

123772039
504071880: RNCC: 3 | RNVC: 2

17 Dec 2008

5340-12-311-9478
Mounting Bracket

123119478
2300074-5545.00: RNCC: 2 | RNVC: 2
2300074-5545.00: RNCC: 3 | RNVC: 2
2300074-5545.00: RNCC: 5 | RNVC: 9

3 Nov 1987

5340-12-322-0152
Mending Plate

123220152
13513031: RNCC: 3 | RNVC: 2
138464: RNCC: 5 | RNVC: 2
000.918.60.22: RNCC: 5 | RNVC: 2

17 Jul 1990

5340-12-314-8560
Resilient Mount

123148560
278620: RNCC: 3 | RNVC: 2

19 Aug 1988

5340-12-323-4428
Dust And Moisture Seal Protective Plug

123234428
1269970986: RNCC: 3 | RNVC: 2

27 Nov 1990

5340-12-321-5785
Angle Bracket

123215785
1789038: RNCC: 3 | RNVC: 2

5 Jun 1990

5340-12-379-8948
Bow Handle

123798948
06415251: RNCC: 3 | RNVC: 2
CV168956: RNCC: 5 | RNVC: 2
06415251: RNCC: 5 | RNVC: 2

10 Sep 2009

5340-12-358-7386
Helical Compression Spring Retainer

123587386
17.10.09: RNCC: 3 | RNVC: 2

11 Nov 2002

5340-12-315-8273
Double Angle Bracket

123158273
54.0026.032.00: RNCC: 3 | RNVC: 2
54002603200: RNCC: 5 | RNVC: 2

30 Nov 1988

5340-12-315-1852
Access Cover

123151852
2500121-882000.00: RNCC: 2 | RNVC: 2
2500121-882000.00: RNCC: 3 | RNVC: 2
2500121-882000.00: RNCC: 5 | RNVC: 9

28 Sep 1988

5340-12-388-0541
Dust And Moisture Seal Protective Cap

123880541
5240160233: RNCC: 3 | RNVC: 2

22 Feb 2012

5340-12-365-6353
Angle Bracket

123656353
J92228313-001: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-12-320-1028
Dust And Moisture Seal Protective Cap-Plug

123201028
C249-A15-C180: RNCC: 3 | RNVC: 2

7 Dec 1989

5340-12-186-6142
Butt Hinge

121866142
631352-1800MM: RNCC: 3 | RNVC: 2

21 Jan 1981

5340-12-196-3831
Loop Clamp

121963831
DIN3016-2-G1-30X9-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-30X9-W1-2: RNCC: 3 | RNVC: 2
SP30/9ZY: RNCC: 3 | RNVC: 2
10.2062.03.00.99: RNCC: 5 | RNVC: 2
1210000030: RNCC: 5 | RNVC: 2
DIN3016-G1-30X9-W1-2: RNCC: 5 | RNVC: 9
10 2062 0300 99: RNCC: 5 | RNVC: 9
VG95931-G30X9-W1: RNCC: 5 | RNVC: 9

4 Jul 1983

5340-12-169-3229
Access Door

121693229
2193-1160-00: RNCC: 3 | RNVC: 2
2193-1160-000: RNCC: 5 | RNVC: 2
2193-1160-00: RNCC: 5 | RNVC: 9
2193-1160-000: RNCC: 5 | RNVC: 9

4 May 1977

5340-12-305-9909
Dust And Moisture Seal Protective Plug

123059909
350I50-RAL 9005: RNCC: 3 | RNVC: 2
GPN350,I50-RAL 9005: RNCC: 5 | RNVC: 9
GPN350-I50-RAL 9005: RNCC: 5 | RNVC: 9
I50-GPN350-RAL 9005: RNCC: 5 | RNVC: 9
I50-RAL 9005: RNCC: 5 | RNVC: 9

17 Jan 1986

5340-12-326-8470
Double Angle Bracket

123268470
1218 9018: RNCC: 3 | RNVC: 2
6.226.0.637.153.4: RNCC: 5 | RNVC: 9

4 Nov 1991

5340-12-377-0635
Mounting Plate

123770635
1030027-123001.000.0: RNCC: 3 | RNVC: 2

10 Dec 2008

5340-12-343-9396
Mounting Plate

123439396
CF 214 842 A: RNCC: 2 | RNVC: 2
CF 214 842 A: RNCC: 3 | RNVC: 2

18 Aug 1997

5340-12-168-1594
Angle Bracket

121681594
CF 409 462 A: RNCC: 2 | RNVC: 2
CF 409 462 A: RNCC: 3 | RNVC: 2
CF 409 462 A: RNCC: 5 | RNVC: 2
CF409462A: RNCC: 5 | RNVC: 2
CF409462A: RNCC: 5 | RNVC: 2
CF 409 462 A: RNCC: 5 | RNVC: 2
CF409462A: RNCC: 5 | RNVC: 2

23 Feb 1977

5340-12-303-2939
Cremone Bolt

123032939
0.32.0603.3: RNCC: 3 | RNVC: 2
0.32.603.3: RNCC: 5 | RNVC: 2

13 Mar 1985

5340-12-336-6384
Access Cover

123366384
1000232-05-03-00-00-003: RNCC: 2 | RNVC: 2
1000232-05-03-00-00-003: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-12-192-8799
Pad Eye

121928799
1224-202-13: RNCC: 3 | RNVC: 2
1224-202-13: RNCC: 5 | RNVC: 2
1224-202.13: RNCC: 5 | RNVC: 2

1 Jun 1982

5340-12-322-8283
Mending Plate

123228283
1181-02.00: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-12-328-9324
Snap Hook

123289324
135-19: RNCC: 3 | RNVC: 2
924516: RNCC: 3 | RNVC: 2
5014D-25: RNCC: 5 | RNVC: 9
5014D-25-ST-VERNICKELT: RNCC: 5 | RNVC: 9
5014D-25-VERNICKELT: RNCC: 5 | RNVC: 9

2 Jul 1992

5340-12-184-8323
Spring Tension Clip

121848323
5801505-319-008: RNCC: 3 | RNVC: 2
5801505-319.008: RNCC: 5 | RNVC: 2

21 Aug 1980

5340-12-350-1098
Loop Clamp

123501098
211-15340: RNCC: 3 | RNVC: 2
34C: RNCC: 5 | RNVC: 2

16 Feb 2000

5340-12-320-6458
Angle Bracket

123206458
42081749: RNCC: 3 | RNVC: 2
42081749EE50-0213: RNCC: 5 | RNVC: 2

5 Feb 1990

5340-12-308-6753
Double Angle Bracket

123086753
PAN6624-03: RNCC: 3 | RNVC: 2

6 Nov 1986

5340-12-190-0354
Webbing Strap

121900354
5801445-30189: RNCC: 2 | RNVC: 2
5801445-30189: RNCC: 3 | RNVC: 2
5801445-30189: RNCC: 5 | RNVC: 9
000-F1-25X2,0X530-PE-RAL6031: RNCC: 6 | RNVC: 9

4 Nov 1981

5340-12-159-4278
Loop Clamp

121594278
DIN3016-1-D2-5-8X15-W1-2-CR: RNCC: 2 | RNVC: 2
RSGU1.5-8/15: RNCC: 3 | RNVC: 2
DIN3016-D2-5-8X15-W1-2: RNCC: 3 | RNVC: 2
4219102005: RNCC: 5 | RNVC: 2
RSGU1100-5-8-15: RNCC: 5 | RNVC: 2
RSGU1100.5-8/15: RNCC: 5 | RNVC: 2
DIN3016-D2-5-8X15-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-301-5857
Mending Plate

123015857
B-02-006-05-019: RNCC: 3 | RNVC: 2

25 Oct 1984

5340-12-320-2200
Mounting Plate

123202200
NO PRIMARY REF 12-320-2200: RNCC: 3 | RNVC: 2
5802102-201410.02: RNCC: 5 | RNVC: 9
5802102-201410.02: RNCC: 5 | RNVC: 9

19 Dec 1989

5340-12-339-6853
Turnbuckle Body

123396853
480-1551-07-00-01: RNCC: 3 | RNVC: 2
480 1551 07 00 01: RNCC: 5 | RNVC: 2
480-151-07-00-01: RNCC: 5 | RNVC: 9

21 Dec 1995

5340-12-197-9726
Mending Plate

121979726
8100146-1200-03: RNCC: 2 | RNVC: 2
16205-146-1200-03: RNCC: 3 | RNVC: 2

7 Dec 1983

5340-12-317-3085
Lock-Release Lever

123173085
4312 712 45760: RNCC: 3 | RNVC: 2
4900235-114 000.01: RNCC: 5 | RNVC: 9

29 Mar 1989

5340-12-153-8330
Retaining Strap

121538330
100355-462000.08: RNCC: 2 | RNVC: 2
100355-462000.08: RNCC: 3 | RNVC: 2
100355-462000-08: RNCC: 5 | RNVC: 2
100355-462000.08: RNCC: 5 | RNVC: 9
100355-462000-08: RNCC: 5 | RNVC: 9
100355-462000-08: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-180-6016
Dust And Moisture Seal Protective Cap

121806016
250/35: RNCC: 3 | RNVC: 2
GPN250/35: RNCC: 5 | RNVC: 2
250-35: RNCC: 5 | RNVC: 9
250-35GPN250: RNCC: 5 | RNVC: 9
250035000: RNCC: 5 | RNVC: 9
35GPN250: RNCC: 5 | RNVC: 9
GPN250-35: RNCC: 5 | RNVC: 9

21 Sep 1979

5340-12-173-1980
Bridge Clamp

121731980
5800828-1331-009: RNCC: 3 | RNVC: 2
5800828-1331.009: RNCC: 5 | RNVC: 2

23 Mar 1978

5340-12-387-0098
Bumper

123870098
1044570: RNCC: 3 | RNVC: 2

26 Oct 2011

5340-12-331-3410
Protection Bellows

123313410
1121-41236: RNCC: 3 | RNVC: 2

26 Apr 1993

5340-12-364-7779
Buckle

123647779
31.0548.20: RNCC: 3 | RNVC: 2

29 Oct 2004

5340-12-139-5855

5340-12-182-6767
Dust And Moisture Seal Protective Cap

121826767
1204 318 045: RNCC: 3 | RNVC: 2
0003215816: RNCC: 5 | RNVC: 2
0003215816: RNCC: 5 | RNVC: 9
3215816: RNCC: 5 | RNVC: 9
1204318045: RNCC: 5 | RNVC: 9

20 Feb 1980

5340-12-374-9790
Section Block Clamp

123749790
279.662 124: RNCC: 2 | RNVC: 2
279.662 124: RNCC: 3 | RNVC: 2

10 Apr 2008

5340-12-374-6471
Support Hook

123746471
454 7025-801: RNCC: 3 | RNVC: 2
454 7025-801: RNCC: 5 | RNVC: 2

4 Mar 2008

5340-12-316-6915
Angle Bracket

123166915
51-76813: RNCC: 3 | RNVC: 2

2 Feb 1989

5340-12-313-3354
Nonmetallic Bumper

123133354
837.2262000026: RNCC: 3 | RNVC: 2
2262000026: RNCC: 3 | RNVC: 2

23 Mar 1988

5340-12-302-6790
Mending Plate

123026790
YK033207: RNCC: 3 | RNVC: 2
H.B 913SV 1056 1975 03 32 0714: RNCC: 5 | RNVC: 9
033207: RNCC: 5 | RNVC: 9

22 Jan 1985

5340-12-305-5002
Butt Hinge Leaf

123055002
81637310165: RNCC: 3 | RNVC: 2
81.63731.0165: RNCC: 5 | RNVC: 2
431.6.00: RNCC: 5 | RNVC: 9

14 Nov 1985

5340-12-390-2842
Mounting Bracket

123902842
120D256052.000.0: RNCC: 2 | RNVC: 2
120D256052.000.0: RNCC: 3 | RNVC: 2

25 Oct 2012

5340-12-337-9900
Mending Plate

123379900
570526877: RNCC: 3 | RNVC: 2
11.005.05.010.0: RNCC: 5 | RNVC: 9

9 May 1995

5340-12-166-6082
Helical Compression Spring Retainer

121666082
WW 415 999 A: RNCC: 2 | RNVC: 2
WW 415 999 A: RNCC: 3 | RNVC: 2
WW 415 999 A: RNCC: 5 | RNVC: 2
WW415999A: RNCC: 5 | RNVC: 9
WW 415 999 A: RNCC: 5 | RNVC: 9
WW415999A: RNCC: 5 | RNVC: 9

28 Sep 1976

5340-12-343-6452
Detent Plunger

123436452
4900059-790601.003.0: RNCC: 2 | RNVC: 2
4900059-790601.003.0: RNCC: 3 | RNVC: 2
1803533: RNCC: 5 | RNVC: 2

10 Jul 1997

5340-12-362-6149
Rim Latch

123626149
JN0528-1: RNCC: 3 | RNVC: 2

12 Mar 2004

5340-12-141-2148
Extension Drawer Slide

121412148
730034-3: RNCC: 2 | RNVC: 2
730034-3: RNCC: 5 | RNVC: 9
730034-3: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-333-0458
Loop Clamp

123330458
2 805 102 367: RNCC: 3 | RNVC: 2
2805102367: RNCC: 5 | RNVC: 2

22 Oct 1993

5340-12-386-5159
Mounting Bracket

123865159
1.314-201600.03: RNCC: 2 | RNVC: 2
1.314-201600.03: RNCC: 5 | RNVC: 2

7 Sep 2011

5340-12-361-7733
Mounting Bracket

123617733
2653-971540.000.0: RNCC: 2 | RNVC: 2
2653-971540.000.0: RNCC: 3 | RNVC: 2

17 Nov 2003

5340-12-300-4886
Angle Bracket

123004886
5801357-5140.01: RNCC: 2 | RNVC: 2
5801357-5140.01: RNCC: 3 | RNVC: 2
5801357-5140.01: RNCC: 5 | RNVC: 9

7 Aug 1984

5340-12-367-9621
Mounting Bracket

123679621
NO PRIMARY REF 12-367-9621: RNCC: 3 | RNVC: 2
7069547: RNCC: 5 | RNVC: 2

10 Nov 2005

5340-12-360-1667
Manual Control Handle

123601667
06320-310: RNCC: 3 | RNVC: 2
NLM06320-310: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-12-157-8908
Strap Hinge

121578908
25858-5200-01: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-354-8915
Retaining Strap

123548915
5400049-118650.02: RNCC: 3 | RNVC: 2

3 Sep 2001

5340-12-144-7510
Rod End Clevis

121447510
160-53021-03: RNCC: 3 | RNVC: 2
160-53021-03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-9021
Loop Clamp

127019021
VG95211-ML-127019021: RNCC: 2 | RNVC: 2
N1119-170: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-342-6178
Mounting Bracket

123426178
U100-3422-160: RNCC: 2 | RNVC: 2
U100-3422-160: RNCC: 3 | RNVC: 2

7 Mar 1997

5340-12-366-3972
Manual Control Lever

123663972
AFG-02B-413C-5021-01: RNCC: 3 | RNVC: 2

20 Apr 2005

5340-12-358-4202
Access Cover

123584202
673-0023: RNCC: 3 | RNVC: 2

16 Oct 2002

5340-12-338-1530
Angle Bracket

123381530
81974860029: RNCC: 3 | RNVC: 2
81.97486-0029: RNCC: 5 | RNVC: 2

30 May 1995

5340-12-170-1050
Flush Catch Claw

121701050
1400003-13000-11: RNCC: 3 | RNVC: 2
1400003-13000-11: RNCC: 5 | RNVC: 9
1400003-13000.11: RNCC: 5 | RNVC: 9

27 Jun 1977

5340-12-391-2411
Angle Bracket

123912411
5622-0262: RNCC: 3 | RNVC: 2

27 Feb 2013

5340-12-380-7823
Mounting Plate

123807823
601251-201235.01: RNCC: 2 | RNVC: 2
601251-201235.01: RNCC: 3 | RNVC: 2

30 Nov 2009

5340-12-377-2980
Webbing Strap

123772980
2500035-105000.06: RNCC: 2 | RNVC: 2
2500035-105000.06: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-12-318-2462
Mending Plate

123182462
4080-327: RNCC: 3 | RNVC: 9

22 Jun 1989

5340-12-144-9547
Turnbuckle Body

121449547
LN29601B04-690: RNCC: 2 | RNVC: 2
25X1X690M10X1LN29601: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-368-5054
Double Angle Bracket

123685054
J27420049-407: RNCC: 3 | RNVC: 2

20 Mar 2006

5340-12-347-6310
Nonmetallic Bumper

123476310
SK-04121: RNCC: 3 | RNVC: 2

18 Jan 1999

5340-12-316-4764
Bow Handle

123164764
5600023-190254.000.0: RNCC: 2 | RNVC: 2
5600023-190254.000.0: RNCC: 3 | RNVC: 2
1271854: RNCC: 5 | RNVC: 2
22014.0.08.740.00: RNCC: 5 | RNVC: 2
22014.0.08.740.00: RNCC: 5 | RNVC: 9

19 Jan 1989

5340-12-310-0454
Flush Lock

123100454
Z1211S-F-M42,5: RNCC: 3 | RNVC: 2
PG4005G095: RNCC: 5 | RNVC: 2
PG4005G095: RNCC: 5 | RNVC: 9
Z1211: RNCC: 5 | RNVC: 9

1 Apr 1987

5340-12-147-2527
Elbow Catch

121472527
AW.7100.015.00-A001: RNCC: 3 | RNVC: 2
132209: RNCC: 5 | RNVC: 2
AW7100-015-00A001: RNCC: 5 | RNVC: 2
AW7100-015-1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-194-4710
Turnbuckle

121944710
A-416755-401: RNCC: 3 | RNVC: 2
A416755-401: RNCC: 5 | RNVC: 2

8 Nov 1982

5340-12-188-2668
Helical Compression Spring Retainer

121882668
2300109-188410.002.0: RNCC: 3 | RNVC: 2
2300109-188410.002.0: RNCC: 3 | RNVC: 2
2300109-188410-002-0: RNCC: 5 | RNVC: 2
2300109-188410-002-0: RNCC: 5 | RNVC: 2
2300109-188410-002-0: RNCC: 5 | RNVC: 9
2300109-188410.002.0: RNCC: 5 | RNVC: 9

23 Jun 1981

5340-12-300-5489
Sealing Plug Assembly

123005489
112TO2AD02-05.00.00: RNCC: 3 | RNVC: 2
73-01-1001-4: RNCC: 5 | RNVC: 2

14 Aug 1984

5340-12-198-7628
Double Angle Bracket

121987628
2500043-283200.00.0: RNCC: 2 | RNVC: 2
2500043-283200.00.0: RNCC: 3 | RNVC: 2
2500043-283200-00-0: RNCC: 5 | RNVC: 2
2500043-283200-00-0: RNCC: 5 | RNVC: 9
2500043-283200.00.0: RNCC: 5 | RNVC: 9

23 Feb 1984

5340-12-370-1186
Mounting Plate

123701186
179-0003.3: RNCC: 3 | RNVC: 2

22 Sep 2006

5340-12-350-2060
Butt Hinge Leaf

123502060
6.372-037: RNCC: 3 | RNVC: 2

28 Feb 2000

5340-12-197-2301
Electrical-Mechanical Equipment Post

121972301
KB-061376-760TEIL2: RNCC: 3 | RNVC: 2

3 Oct 1983

5340-12-128-9625
Retaining Strap

121289625
VG95933ER-12-MS-BK: RNCC: 2 | RNVC: 2
1/2D12MMN325MS: RNCC: 3 | RNVC: 2
1-2D12MMN325MS: RNCC: 5 | RNVC: 2
378230: RNCC: 5 | RNVC: 2
700325012103: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-371-8640
Angle Bracket

123718640
1505681: RNCC: 3 | RNVC: 2
548-060200.03.0: RNCC: 5 | RNVC: 2
15010523: RNCC: 5 | RNVC: 2

23 May 2007

5340-12-145-6200
Webbing Strap

121456200
23176-262400.00.0: RNCC: 2 | RNVC: 2
23176-262400.00.0: RNCC: 3 | RNVC: 2
82300-23176-262400.00.0: RNCC: 5 | RNVC: 2
23176-262400-00-0: RNCC: 5 | RNVC: 2
23176-262400-00-0: RNCC: 5 | RNVC: 9
23176-262400.00.0: RNCC: 5 | RNVC: 9
82300-B215X20-NBR-ST-OG: RNCC: 6 | RNVC: 9

30 May 1969

5340-12-178-6760
Retaining Strap

121786760
VG95933CR-28-W1-BK: RNCC: 2 | RNVC: 2
2/1D28MMN325: RNCC: 3 | RNVC: 2
2-1D28MMN325: RNCC: 5 | RNVC: 2

9 May 1979

5340-12-320-6499
Loop Clamp

123206499
DIN3015-LA-K-3R-20-PP-W1: RNCC: 2 | RNVC: 2
HRL3A20PP STMBL: RNCC: 3 | RNVC: 2
RAPR3-320: RNCC: 3 | RNVC: 2
SP320PP-DP-AS: RNCC: 3 | RNVC: 2
DIN3015-LA3R-20PP-W1-K: RNCC: 5 | RNVC: 2
RAPR3-320: RNCC: 5 | RNVC: 2
330321: RNCC: 5 | RNVC: 2

5 Feb 1990

5340-12-175-7959
Angle Bracket

121757959
81429400119: RNCC: 3 | RNVC: 2
81429400097: RNCC: 5 | RNVC: 9
23230-221600-002-0: RNCC: 5 | RNVC: 9
23230-221600-001-0: RNCC: 5 | RNVC: 9
23230-221600.001.0: RNCC: 5 | RNVC: 9
81.42940-0097: RNCC: 5 | RNVC: 9
23230-221600.002.0: RNCC: 5 | RNVC: 9

18 Oct 1978

5340-12-301-0034
Nonmetallic Bumper

123010034
P-244605-003: RNCC: 3 | RNVC: 2
P244605-003: RNCC: 5 | RNVC: 2

15 Sep 1984

5340-12-199-3132
Rod End Connector

121993132
2.72-10251: RNCC: 3 | RNVC: 2
2-72-10251: RNCC: 5 | RNVC: 2
2-72-10251: RNCC: 5 | RNVC: 2

11 Apr 1984

5340-12-369-8235
Nonmetallic Bumper

123698235
SK930-170000.001.0: RNCC: 3 | RNVC: 2
7076369: RNCC: 5 | RNVC: 2

18 Aug 2006

5340-12-369-3334
Manual Control Handle

123693334
5981-181723.000.0: RNCC: 3 | RNVC: 2

22 Jun 2006

5340-12-701-1657
Mounting Bracket

127011657
VG95211-ML-127011657: RNCC: 2 | RNVC: 2
5.12.0237.1052.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-339-7021
Access Cover

123397021
2500255-199910.000.0: RNCC: 2 | RNVC: 2
2500255-199910.000.0: RNCC: 3 | RNVC: 2

22 Dec 1995

5340-12-134-5215
Dust And Moisture Seal Protective Cap-Plug

121345215
STOPFEN10X9X15MM: RNCC: 3 | RNVC: 2
ST0PFEN10X9X15MM: RNCC: 5 | RNVC: 2
0039-112: RNCC: 5 | RNVC: 2
0039112: RNCC: 5 | RNVC: 2
8402394: RNCC: 5 | RNVC: 2

30 May 1969

Load More Results