What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 112 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 112 of 178

5340-12-375-0050
Dirt And Liquid Deflector

123750050
279.657 232: RNCC: 2 | RNVC: 2
279.657 232: RNCC: 3 | RNVC: 2

11 Apr 2008

5340-12-345-4381
Mounting Bracket

123454381
54.0053.182.00: RNCC: 3 | RNVC: 2

16 Mar 1998

5340-12-306-6587
Angle Bracket

123066587
270306040: RNCC: 2 | RNVC: 2
9851042: RNCC: 3 | RNVC: 2
27 0306 040: RNCC: 5 | RNVC: 9
9851042: RNCC: 5 | RNVC: 9

19 Mar 1986

5340-12-316-8609
Bow Handle

123168609
5203197: RNCC: 2 | RNVC: 2
5203197: RNCC: 3 | RNVC: 2

20 Feb 1989

5340-12-199-8692

5340-12-145-6872

5340-12-158-7085
Loop Clamp

121587085
DIN3016-1-E2-24-30X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-E2-24-30X15-W1-2: RNCC: 3 | RNVC: 2
RSGU0.24-30/15: RNCC: 3 | RNVC: 2
4209104024: RNCC: 5 | RNVC: 2
RSGU24-30-15: RNCC: 5 | RNVC: 2
RSGU24-30/15: RNCC: 5 | RNVC: 2
DIN3016-E2-24-30X15-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-370-8481
Door Handle

123708481
8120-0017: RNCC: 3 | RNVC: 2

10 Jan 2007

5340-12-362-0098
Rigid Caster

123620098
80-000-033: RNCC: 3 | RNVC: 2

16 Dec 2003

5340-12-155-2596
Mending Plate

121552596
160-22516-20: RNCC: 3 | RNVC: 2
160-22516-20: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-381-5007
Mounting Bracket

123815007
WEW-5838-07: RNCC: 3 | RNVC: 2

24 Feb 2010

5340-12-192-8953
Angle Bracket

121928953
4608870112: RNCC: 3 | RNVC: 2
721 1 69 094 1: RNCC: 5 | RNVC: 9

3 Jun 1982

5340-12-121-5302
Retaining Strap

121215302
1003054: RNCC: 3 | RNVC: 2
1003054: RNCC: 3 | RNVC: 2
604-5MM: RNCC: 5 | RNVC: 2
1003054: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-361-2654
Access Cover

123612654
51065120037: RNCC: 3 | RNVC: 2
51.06512-0037: RNCC: 5 | RNVC: 2

11 Sep 2003

5340-12-197-0523
Butt Hinge Leaf

121970523
6132.999.3: RNCC: 3 | RNVC: 2

14 Sep 1983

5340-12-314-6700
Angle Bracket

123146700
512214-0250.000: RNCC: 3 | RNVC: 2
512214-0250: RNCC: 5 | RNVC: 2

28 Jul 1988

5340-12-193-8775
Pad Eye

121938775
160-634045.08: RNCC: 3 | RNVC: 2
160-634045-08: RNCC: 5 | RNVC: 2
160-634045.08: RNCC: 5 | RNVC: 9

8 Sep 1982

5340-12-148-2279
Spring Tension Clip

121482279
25 885-001: RNCC: 3 | RNVC: 2
25885-001: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-188-0174
Support Hook

121880174
2300109-192530.002.0: RNCC: 3 | RNVC: 2
2300109-192530.002.0: RNCC: 3 | RNVC: 2
2300109-192530-002-0: RNCC: 5 | RNVC: 2
2300109-192530-002-0: RNCC: 5 | RNVC: 2
2300109-192530-002-0: RNCC: 5 | RNVC: 9
2300109-192530.002.0: RNCC: 5 | RNVC: 9

27 May 1981

5340-12-309-6293
Catch Strike

123096293
51L59-1-1AA: RNCC: 3 | RNVC: 2
704257477: RNCC: 5 | RNVC: 2

10 Feb 1987

5340-12-300-0239
Double Angle Bracket

123000239
C249-A34-C39: RNCC: 3 | RNVC: 2

27 Jun 1984

5340-12-386-4292
Access Cover

123864292
9999261-620200.005.0: RNCC: 3 | RNVC: 2

31 Aug 2011

5340-12-307-0066
Retaining Strap

123070066
LN29836B2-12: RNCC: 2 | RNVC: 2

28 Apr 1986

5340-12-346-4070
Mounting Bracket

123464070
2300348-183025.003.0: RNCC: 2 | RNVC: 2
2300348-183025.003.0: RNCC: 3 | RNVC: 2
1807316: RNCC: 5 | RNVC: 2

22 Jul 1998

5340-12-191-5585
Bow Handle

121915585
42099-0.12: RNCC: 3 | RNVC: 2
7040403: RNCC: 5 | RNVC: 2
29 6198 42: RNCC: 5 | RNVC: 2
29619842: RNCC: 5 | RNVC: 2
42099-0.12: RNCC: 5 | RNVC: 9
5810038: RNCC: 5 | RNVC: 9

10 Feb 1982

5340-12-390-7111
Corrosion Preventive Anode

123907111
1-4031-165-000: RNCC: 3 | RNVC: 2

5 Dec 2012

5340-12-149-8672
Resilient Mount

121498672
845-735043.NR50.ST: RNCC: 3 | RNVC: 2
735043: RNCC: 3 | RNVC: 2
57350430041: RNCC: 5 | RNVC: 2
735043MITTEL: RNCC: 5 | RNVC: 2
25704-190440-18-0: RNCC: 5 | RNVC: 2
25704-190440-18-0: RNCC: 5 | RNVC: 9
25704-190440.18.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-162-5242
Support Hook

121625242
100356-200000.45: RNCC: 2 | RNVC: 2
100356-200000.45: RNCC: 3 | RNVC: 2
100356-200000-45: RNCC: 5 | RNVC: 2
100356-200000-45: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-329-3480
Recess Handle

123293480
2608/155MM: RNCC: 3 | RNVC: 2
RAR3413: RNCC: 5 | RNVC: 2

8 Aug 1992

5340-12-318-2408
Butt Hinge

123182408
3080-7201-10-01: RNCC: 3 | RNVC: 2
308-7201-10-01: RNCC: 5 | RNVC: 2

22 Jun 1989

5340-12-319-7131
Mounting Bracket

123197131
504068: RNCC: 3 | RNVC: 2
504068: RNCC: 3 | RNVC: 2

27 Oct 1989

5340-12-361-4170
Mounting Bracket

123614170
1504299: RNCC: 3 | RNVC: 2

25 Sep 2003

5340-12-366-0809
Dust And Moisture Seal Protective Plug

123660809
0029975186: RNCC: 3 | RNVC: 2

7 Mar 2005

5340-12-316-6916
Angle Bracket

123166916
51-76814: RNCC: 3 | RNVC: 2

2 Feb 1989

5340-12-340-5452
Double Angle Bracket

123405452
5903040040: RNCC: 3 | RNVC: 2
5903040040: RNCC: 5 | RNVC: 2
5903040040: RNCC: 5 | RNVC: 2
590 304 00 40: RNCC: 5 | RNVC: 2

30 Apr 1996

5340-12-322-6021
Mounting Bracket

123226021
81259405036: RNCC: 3 | RNVC: 2
81.25940.5036: RNCC: 5 | RNVC: 2

5 Sep 1990

5340-12-302-5571
Mending Plate

123025571
4A69130: RNCC: 3 | RNVC: 2
02962184: RNCC: 5 | RNVC: 2

11 Jan 1985

5340-12-195-8506
Mending Plate

121958506
6036105: RNCC: 3 | RNVC: 2
603.6105: RNCC: 5 | RNVC: 2

25 Apr 1983

5340-12-338-1095
Double Angle Bracket

123381095
5802017-600491.00: RNCC: 2 | RNVC: 2
5802017-600491.00: RNCC: 3 | RNVC: 2

23 May 1995

5340-12-183-9660
Spring Tension Clip

121839660
SFP5004: RNCC: 3 | RNVC: 2
113857113: RNCC: 5 | RNVC: 2

7 Jun 1980

5340-12-355-3999
Retaining Strap

123553999
4639950044: RNCC: 3 | RNVC: 2

12 Nov 2001

5340-12-314-2040
Angle Bracket

123142040
272.317 754: RNCC: 2 | RNVC: 2
272.317.754: RNCC: 3 | RNVC: 2
272.317 754: RNCC: 5 | RNVC: 9

16 Jun 1988

5340-12-182-9796
Angle Bracket

121829796
81394400024: RNCC: 3 | RNVC: 2

11 Mar 1980

5340-12-344-7941
Beam Gripping Clamp

123447941
NO27223: RNCC: 3 | RNVC: 2

9 Dec 1997

5340-12-314-2467
Angle Bracket

123142467
6204298040: RNCC: 3 | RNVC: 2
620 429 80 40: RNCC: 5 | RNVC: 2

21 Jun 1988

5340-12-386-5149
Mounting Bracket

123865149
0053 316 065: RNCC: 3 | RNVC: 2

7 Sep 2011

5340-12-358-8745
Mounting Bracket

123588745
5400051-882152.00: RNCC: 2 | RNVC: 2
5400051-882152.00: RNCC: 3 | RNVC: 2

25 Nov 2002

5340-12-380-9124
Loop Clamp

123809124
S281M8041101: RNCC: 3 | RNVC: 2

11 Dec 2009

5340-12-317-1817
Spring Tension Clip

123171817
4616820086: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-12-302-8694
Electrical-Mechanical Equipment Post

123028694
VG95148B5,5XM3X55-ST: RNCC: 2 | RNVC: 2
VG95148B5,5XM3X55-ST: RNCC: 3 | RNVC: 2
70625: RNCC: 3 | RNVC: 2

5 Feb 1985

5340-12-315-6216
Access Cover

123156216
5803471-201810.00: RNCC: 2 | RNVC: 2
65.7789.451.00-A001: RNCC: 3 | RNVC: 2

12 Nov 1988

5340-12-186-7439
Mending Plate

121867439
5802206-150000-004: RNCC: 2 | RNVC: 2
535.7112: RNCC: 3 | RNVC: 2
5357112: RNCC: 5 | RNVC: 2

2 Feb 1981

5340-12-325-1358
Webbing Strap

123251358
60062-001: RNCC: 3 | RNVC: 2
60 062-001: RNCC: 5 | RNVC: 9

7 May 1991

5340-12-320-2205
Double Angle Bracket

123202205
5802298-210000.01: RNCC: 2 | RNVC: 2
5802298-210000.01: RNCC: 3 | RNVC: 2

19 Dec 1989

5340-12-347-5784
Support Hook

123475784
9897822: RNCC: 3 | RNVC: 2
463-151490.001: RNCC: 5 | RNVC: 2
9897822: RNCC: 5 | RNVC: 9
463-151490.001: RNCC: 5 | RNVC: 9

11 Jan 1999

5340-12-307-7515
Resilient Mount

123077515
742034S6.NR40.ST: RNCC: 3 | RNVC: 2
5718220.11MN40: RNCC: 3 | RNVC: 2
742034S6-40SHORE: RNCC: 3 | RNVC: 2
57420340640: RNCC: 5 | RNVC: 2
742034S6MG640: RNCC: 5 | RNVC: 2

23 Jul 1986

5340-12-341-9679
Spring Loaded Cylinder Fastener

123419679
GN613-6-A-NI: RNCC: 3 | RNVC: 2
2212.406: RNCC: 3 | RNVC: 2

22 Nov 1996

5340-12-394-2113
Mounting Plate

123942113
1077721-5: RNCC: 3 | RNVC: 2

12 Nov 2013

5340-12-347-5795
Hasp Staple

123475795
97.0066.1789: RNCC: 3 | RNVC: 2
999999 01631 4 1075: RNCC: 5 | RNVC: 2

11 Jan 1999

5340-12-194-1146
Ball Socket Seat

121941146
SK803-2: RNCC: 3 | RNVC: 2

4 Oct 1982

5340-12-143-6199

5340-12-183-1041
Mending Plate

121831041
42005921: RNCC: 3 | RNVC: 2
42005921EZ5054-80: RNCC: 5 | RNVC: 2

20 Mar 1980

5340-12-165-0002
Nonmetallic Bumper

121650002
C20315A8502C3: RNCC: 3 | RNVC: 2
LRSCH2T3: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-329-6875
Webbing Strap

123296875
4617900396: RNCC: 3 | RNVC: 2
461 790 03 96: RNCC: 5 | RNVC: 2

19 Sep 1992

5340-12-316-8635
Nonmetallic Bumper

123168635
200.747: RNCC: 2 | RNVC: 2
200.747: RNCC: 3 | RNVC: 2
0979902: RNCC: 5 | RNVC: 2
0979902: RNCC: 5 | RNVC: 9

20 Feb 1989

5340-12-351-7485
Mounting Bracket

123517485
2500266-192500.000.0: RNCC: 3 | RNVC: 2

17 Aug 2000

5340-12-195-6575
Loop Clamp

121956575
RS1.20/15-3.1364T42: RNCC: 3 | RNVC: 2
LRS1100-20-15-12ALU: RNCC: 5 | RNVC: 2
RS1100.20/15-3.1364T42: RNCC: 5 | RNVC: 2

24 Mar 1983

5340-12-188-0427
Loop Clamp

121880427
DIN3016-1-E2-16-21X20-W1-2: RNCC: 2 | RNVC: 2
DIN3016-E2-21-16X20-W1-2: RNCC: 3 | RNVC: 2
RSGU0.21-16/20: RNCC: 3 | RNVC: 2
DIN3016-E2-21-16X20-W1-2: RNCC: 5 | RNVC: 2
4209107021: RNCC: 5 | RNVC: 2
RSGU21-16-20: RNCC: 5 | RNVC: 2
RSGU21-16/20: RNCC: 5 | RNVC: 2

1 Jun 1981

5340-12-301-5353
Rod End Clevis

123015353
VG85525-1M16-2.0960.98: RNCC: 2 | RNVC: 2

23 Oct 1984

5340-12-333-5312
Webbing Strap

123335312
01155-1-2500MM: RNCC: 3 | RNVC: 2
01155-1-2500: RNCC: 5 | RNVC: 2
01155-1-LE=2500: RNCC: 5 | RNVC: 2
79057-2500: RNCC: 5 | RNVC: 2
DIN60060-1-25X2500-C3: RNCC: 5 | RNVC: 9

3 Jan 1994

5340-12-196-9976
Webbing Strap

121969976
4900059-212073.000.0: RNCC: 2 | RNVC: 2
4900059-212073.000.0: RNCC: 3 | RNVC: 2
4900059-212073.000.0: RNCC: 3 | RNVC: 2
01803-2-SCHLAUFE-FE710MM-LE900MM: RNCC: 3 | RNVC: 2
4900059-212073.000.0: RNCC: 3 | RNVC: 2
4900059-212073.000.0: RNCC: 3 | RNVC: 2
79016/SCHLAUFE-1610-710: RNCC: 3 | RNVC: 2
4900059-212073-000-0: RNCC: 5 | RNVC: 2
DIN60060-2-50X710X900-C1/SCHLAUF: RNCC: 5 | RNVC: 9
4900059-212073.000.0: RNCC: 5 | RNVC: 9

8 Sep 1983

5340-12-304-6526
Helical Compression Spring Seat

123046526
12-09: RNCC: 3 | RNVC: 2

8 Aug 1985

5340-12-357-8104
Mounting Bracket

123578104
8854 118-151: RNCC: 3 | RNVC: 2

26 Jul 2002

5340-12-390-6693
Angle Bracket

123906693
316438: RNCC: 3 | RNVC: 2
2170-07-14-04/37: RNCC: 5 | RNVC: 2

3 Dec 2012

5340-12-186-7680
Dust And Moisture Seal Protective Cap

121867680
250/26: RNCC: 3 | RNVC: 2
GPN250/26: RNCC: 5 | RNVC: 2
GPN250-26: RNCC: 5 | RNVC: 2
250026000: RNCC: 5 | RNVC: 9
GPN250-26: RNCC: 5 | RNVC: 9

2 Feb 1981

5340-12-343-5515
Retaining Strap

123435515
50010600030: RNCC: 3 | RNVC: 2
F300 0T 022 4029: RNCC: 6 | RNVC: 9

2 Jul 1997

5340-12-357-5291
Runner

123575291
0008370724: RNCC: 3 | RNVC: 2

28 Jun 2002

5340-12-343-6724
Lock-Release Lever

123436724
704538: RNCC: 3 | RNVC: 9
704538: RNCC: 3 | RNVC: 9

14 Jul 1997

5340-12-311-9909
Angle Bracket

123119909
01TC30832: RNCC: 3 | RNVC: 2

9 Nov 1987

5340-12-316-1529
Loop Clamp

123161529
3814922341: RNCC: 3 | RNVC: 2

24 Dec 1988

5340-12-180-3632
Angle Bracket

121803632
WW 303 481: RNCC: 3 | RNVC: 9
WW 303 481: RNCC: 5 | RNVC: 2
WW303481: RNCC: 5 | RNVC: 2
WW303481: RNCC: 5 | RNVC: 9

7 Sep 1979

5340-12-366-0924
Loop Clamp

123660924
EN4114F15WR1: RNCC: 2 | RNVC: 2

8 Mar 2005

5340-12-345-6749
Spring Loaded Cylinder Fastener

123456749
B39340101: RNCC: 3 | RNVC: 2

14 Apr 1998

5340-12-391-7191
Access Cover

123917191
I006481TAN686A: RNCC: 3 | RNVC: 2

28 Mar 2013

5340-12-347-7386
Manual Control Lever

123477386
T635M1030101: RNCC: 3 | RNVC: 2

3 Feb 1999

5340-12-377-3503
Loop Clamp

123773503
41222260: RNCC: 3 | RNVC: 2

12 Jan 2009

5340-12-348-2206
Nonmetallic Bumper

123482206
0096310000: RNCC: 3 | RNVC: 2

10 May 1999

5340-12-154-5250

5340-12-320-3998
Angle Bracket

123203998
P-296828-015: RNCC: 3 | RNVC: 2
P296828-015: RNCC: 5 | RNVC: 2

11 Jan 1990

5340-12-161-9295
Compression Cup

121619295
H57-1-88NBR/101: RNCC: 3 | RNVC: 2
5L6614-001-34: RNCC: 5 | RNVC: 2
H57-1: RNCC: 5 | RNVC: 2
H57-1-88NBR101: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-702-3718
Mounting Bracket

127023718
VG95211-ML-127023718: RNCC: 2 | RNVC: 2
5.12.4805.2051.01: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-363-1229
Expansion Plug

123631229
DIN443-A36-ST-PHR: RNCC: 2 | RNVC: 2
0114 8031: RNCC: 3 | RNVC: 2
4613560020: RNCC: 5 | RNVC: 2
0117 9634: RNCC: 5 | RNVC: 9

5 May 2004

5340-12-197-5846
Mending Plate

121975846
A-230129-151: RNCC: 3 | RNVC: 2
A230129-151: RNCC: 5 | RNVC: 2

7 Nov 1983

5340-12-181-2338
Loop Clamp

121812338
DIN3016-2-G1-90X9-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-90X9-W1-2: RNCC: 3 | RNVC: 2
SP90/9ZY: RNCC: 3 | RNVC: 2
SP90-9ZY: RNCC: 5 | RNVC: 2
1210000090: RNCC: 5 | RNVC: 2
VG95931-G90X9-W1: RNCC: 5 | RNVC: 9
VG95931G90X9W1: RNCC: 5 | RNVC: 9
DIN3016-G1-90X9-W1-2: RNCC: 5 | RNVC: 9

5 Nov 1979

5340-12-305-6853
Plain Solid Disk

123056853
00.8200-0.00-05: RNCC: 3 | RNVC: 2

4 Dec 1985

5340-12-301-9861
Mending Plate

123019861
A-716653-007: RNCC: 3 | RNVC: 2
A716653-007: RNCC: 5 | RNVC: 2

24 Nov 1984

5340-12-184-7209
Clamping Catch

121847209
1123-3: RNCC: 3 | RNVC: 2
90433229-00: RNCC: 5 | RNVC: 2
9043 3 229-00: RNCC: 5 | RNVC: 2
9043 3 229-00: RNCC: 5 | RNVC: 9
90433229-00: RNCC: 5 | RNVC: 9

14 Aug 1980

5340-12-304-5536
Electrical-Mechanical Equipment Post

123045536
VG95148C5XM2,5X8,5-ALMGSI1F28ALO: RNCC: 3 | RNVC: 2
2989120764: RNCC: 3 | RNVC: 2

30 Jul 1985

5340-12-374-0464
Lock Bolt

123740464
2500310-183720.002.0: RNCC: 3 | RNVC: 2

14 Jan 2008

5340-12-175-2884
Loop Clamp

121752884
6.6208-0033.1: RNCC: 3 | RNVC: 2
6-6208-0033-1: RNCC: 5 | RNVC: 2

6 Sep 1978

5340-12-342-2029
Helical Compression Spring Seat

123422029
R900320793: RNCC: 3 | RNVC: 2
R900161934: RNCC: 5 | RNVC: 2
1500 021 4 320793: RNCC: 5 | RNVC: 2
320793: RNCC: 5 | RNVC: 9
161934: RNCC: 5 | RNVC: 9

6 Jan 1997

5340-12-386-5053
Butt Hinge

123865053
120D187114.000.0: RNCC: 2 | RNVC: 2
120D187114.000.0: RNCC: 3 | RNVC: 2
1795970: RNCC: 5 | RNVC: 2

7 Sep 2011

5340-12-334-6770
Loop Clamp

123346770
922.181.4: RNCC: 3 | RNVC: 2
9221814: RNCC: 5 | RNVC: 2

8 Jun 1994

5340-12-369-1518
Multiple Angle Bracket

123691518
7803221107AA: RNCC: 3 | RNVC: 2
1030010-721000.007.0: RNCC: 5 | RNVC: 2

30 May 2006

5340-12-349-4538
Mounting Bracket

123494538
12 11 1 341 535: RNCC: 3 | RNVC: 2

17 Nov 1999

5340-12-325-7147
Access Cover

123257147
3 4459-1: RNCC: 3 | RNVC: 2

2 Jul 1991

5340-12-388-8667
Mounting Bracket

123888667
122W750002.000.0: RNCC: 2 | RNVC: 2
122W750002.000.0: RNCC: 3 | RNVC: 2

2 May 2012

5340-12-310-2820
Mending Plate

123102820
1216 8560: RNCC: 3 | RNVC: 2
12168560: RNCC: 5 | RNVC: 9
6.420.9.788.004.4: RNCC: 5 | RNVC: 9

5 May 1987

5340-12-340-4128
Angle Bracket

123404128
182314302: RNCC: 3 | RNVC: 2
E 18 231 4302: RNCC: 5 | RNVC: 2

10 Apr 1996

5340-12-384-2349
Spring Loaded Cylinder Fastener

123842349
03096-02308: RNCC: 3 | RNVC: 2

4 Feb 2011

5340-12-193-8183
Angle Bracket

121938183
C22136-A1000-C855: RNCC: 3 | RNVC: 2
C22136A1000C855: RNCC: 5 | RNVC: 2

2 Sep 1982

5340-12-193-7330
Resilient Mount

121937330
C22234-A1000-B31: RNCC: 3 | RNVC: 2
C22234A1000B31: RNCC: 5 | RNVC: 2

25 Aug 1982

5340-12-150-9415
Nonmetallic Bumper

121509415
100109-8131-01: RNCC: 2 | RNVC: 2
100109-8131-01: RNCC: 5 | RNVC: 2
100109-8131.01: RNCC: 5 | RNVC: 2
100109-8131-01: RNCC: 5 | RNVC: 9
100109-8131-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-176-3587
Angle Bracket

121763587
2225-895: RNCC: 3 | RNVC: 2
2225895: RNCC: 5 | RNVC: 2

27 Nov 1978

5340-12-381-1945
Electronic Equipment Hardware Kit

123811945
20110-068: RNCC: 3 | RNVC: 2

19 Jan 2010

5340-12-356-3337
Support Hook

123563337
529-991120.00.0: RNCC: 2 | RNVC: 2
529-991120.00.0: RNCC: 3 | RNVC: 2
1501691: RNCC: 5 | RNVC: 2
529-9911120.00.0: RNCC: 5 | RNVC: 9

14 Feb 2002

5340-12-701-6971
Angle Bracket

127016971
VG95211-ML-127016971: RNCC: 2 | RNVC: 2
5.12.7223.8005.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-5284
Mounting Bracket

127025284
VG95211-ML-127025284: RNCC: 2 | RNVC: 2
5.51.7020.0030.08: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-176-1167
Double Angle Bracket

121761167
81411402217: RNCC: 3 | RNVC: 2
81.41140.2217: RNCC: 5 | RNVC: 2
23246-150605-001-0: RNCC: 5 | RNVC: 9
23246-150605.001.0: RNCC: 5 | RNVC: 9

9 Nov 1978

5340-12-702-4583
Mounting Bracket

127024583
VG95211-ML-127024583: RNCC: 2 | RNVC: 2
5.51.0603.0016.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-138-1062
Buckle

121381062
DIN5291-30-ST-SCHWARZ: RNCC: 2 | RNVC: 2
448/3-SCHWARZ: RNCC: 3 | RNVC: 2
30DIN5291STSCHWARZ: RNCC: 5 | RNVC: 2
3220049: RNCC: 5 | RNVC: 2
51044: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-091-0793

5340-12-342-0796
Nut And Bolt Locking Plate

123420796
135A03032: RNCC: 3 | RNVC: 2
135A03032E1: RNCC: 5 | RNVC: 2

7 Dec 1996

5340-12-387-9749
Dust And Moisture Seal Protective Cover

123879749
0626-269: RNCC: 3 | RNVC: 2

13 Feb 2012

5340-12-390-0583
Mounting Bracket

123900583
DF 400 314 AX: RNCC: 3 | RNVC: 2
DF 400 314 AX: RNCC: 5 | RNVC: 2

27 Sep 2012

5340-12-326-2477
Double Angle Bracket

123262477
3964290140: RNCC: 3 | RNVC: 2
396 429 01 40: RNCC: 5 | RNVC: 2

21 Aug 1991

5340-12-173-8602
Helical Compression Spring Seat

121738602
4253251015: RNCC: 3 | RNVC: 2

17 May 1978

5340-12-319-0763
Plug Button

123190763
129066: RNCC: 3 | RNVC: 2
129066: RNCC: 5 | RNVC: 2
129066: RNCC: 5 | RNVC: 9

5 Sep 1989

5340-12-322-4938
Headless Straight Rod

123224938
1571107: RNCC: 3 | RNVC: 2

27 Aug 1990

5340-12-139-1527

5340-12-358-8602
Mending Plate

123588602
DSAN002: RNCC: 3 | RNVC: 2

22 Nov 2002

5340-12-322-2041
Mounting Bracket

123222041
40 0176 256: RNCC: 2 | RNVC: 2
40 0176 256: RNCC: 3 | RNVC: 2
40 0176 256: RNCC: 5 | RNVC: 9

1 Aug 1990

5340-12-389-9331
Rod End Clevis

123899331
105-45529: RNCC: 3 | RNVC: 2

14 Sep 2012

5340-12-378-0723
Dust And Moisture Seal Protective Cap

123780723
0008245849: RNCC: 3 | RNVC: 2

11 Mar 2009

5340-12-139-9954
Retaining Strap

121399954
BSN12X20X2: RNCC: 3 | RNVC: 2
15200000012: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-381-1237
Dust And Moisture Seal Protective Plug

123811237
4258680239: RNCC: 3 | RNVC: 2

13 Jan 2010

5340-12-371-4452
Klemme

123714452
76573: RNCC: 3 | RNVC: 2

30 Mar 2007

5340-12-373-4636
Nonmetallic Bumper

123734636
04270063: RNCC: 3 | RNVC: 2

6 Nov 2007

5340-12-366-7756
Dust And Moisture Seal Protective Cap

123667756
CBD32504P05: RNCC: 3 | RNVC: 2

7 Jun 2005

5340-12-345-7540
Mounting Bracket

123457540
TA3005P003: RNCC: 3 | RNVC: 2

22 Apr 1998

5340-12-350-0067
Dust And Moisture Seal Protective Plug

123500067
88960020073: RNCC: 3 | RNVC: 2

4 Feb 2000

5340-12-183-2522
Angle Bracket

121832522
51974800325: RNCC: 3 | RNVC: 2
5000498384: RNCC: 5 | RNVC: 2
5000498384: RNCC: 5 | RNVC: 9

28 Mar 1980

5340-12-387-8252
Rim Lock

123878252
XP52799100192: RNCC: 3 | RNVC: 2

1 Feb 2012

5340-12-358-3819
Dust And Moisture Seal Boot

123583819
0003300985: RNCC: 3 | RNVC: 2

15 Oct 2002

5340-12-004-3845

5340-12-384-8726
Helical Compression Spring Seat

123848726
F1.1189-30-10-10.00-47: RNCC: 3 | RNVC: 2

6 Apr 2011

5340-12-352-1044
Angle Bracket

123521044
2500238-041000.001.0: RNCC: 2 | RNVC: 2
2500238-041000.001.0: RNCC: 3 | RNVC: 2

17 Oct 2000

5340-12-307-6674
Nonmetallic Bumper

123076674
537161-4283.000: RNCC: 3 | RNVC: 2
537161-4283: RNCC: 5 | RNVC: 9
537161-4283.000: RNCC: 5 | RNVC: 9

15 Jul 1986

5340-12-168-0797
Mending Plate

121680797
3H050-1106: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-12-341-0770
Runner

123410770
635/250LG: RNCC: 3 | RNVC: 9

25 Jul 1996

5340-12-146-9554
Friction Catch

121469554
4SI563T3: RNCC: 3 | RNVC: 2
25704-190240T8: RNCC: 5 | RNVC: 2
25704-190240T8: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-329-7860
Mounting Bracket

123297860
5802261-561000.000: RNCC: 2 | RNVC: 2
5802261-561000.000: RNCC: 3 | RNVC: 2

29 Sep 1992

5340-12-196-4585
Lock-Release Lever

121964585
0120803503: RNCC: 3 | RNVC: 2
000000-0150.523: RNCC: 5 | RNVC: 2
150.523: RNCC: 5 | RNVC: 2
01208.35-RAL7000: RNCC: 5 | RNVC: 2

11 Jul 1983

5340-12-383-4565
Clamping Catch

123834565
GN851-160-T2-NI: RNCC: 3 | RNVC: 2

22 Oct 2010

5340-12-365-0965
Pawl Fastener

123650965
1000-U548: RNCC: 3 | RNVC: 2
407797: RNCC: 5 | RNVC: 2

27 Nov 2004

5340-12-328-7862
Dust And Moisture Seal Boot

123287862
30-79350-0239: RNCC: 3 | RNVC: 2

24 Jun 1992

5340-12-701-4933
Mounting Bracket

127014933
VG95211-ML-127014933: RNCC: 2 | RNVC: 2
5.12.5850.0601.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-320-5722
Access Cover

123205722
140-133100-001-0: RNCC: 3 | RNVC: 2
057871-625: RNCC: 5 | RNVC: 2

26 Jan 1990

5340-12-304-0647
Electrical-Mechanical Equipment Post

123040647
5801774-84: RNCC: 3 | RNVC: 2
5801774-84: RNCC: 5 | RNVC: 9

7 Jun 1985

5340-12-339-1455
Mounting Bracket

123391455
3662002240: RNCC: 3 | RNVC: 2

17 Oct 1995

5340-12-188-3372
Extension Drawer Slide

121883372
409042858: RNCC: 3 | RNVC: 2
409-042858: RNCC: 5 | RNVC: 2
38 702-032: RNCC: 5 | RNVC: 2
38702-032: RNCC: 5 | RNVC: 2

1 Jul 1981

5340-12-376-8931
Bolzen

123768931
040.13.0024: RNCC: 3 | RNVC: 2
300.062.329: RNCC: 5 | RNVC: 2

17 Nov 2008

5340-12-179-6295
Door Button

121796295
313M: RNCC: 3 | RNVC: 2
000 767 37 01: RNCC: 5 | RNVC: 2
0007500050: RNCC: 5 | RNVC: 2
0007500050: RNCC: 5 | RNVC: 2

13 Jul 1979

5340-12-199-5577
Mending Plate

121995577
2300002-122200.010: RNCC: 2 | RNVC: 2
2300002-122200.010: RNCC: 3 | RNVC: 2
2300002-122200-010: RNCC: 5 | RNVC: 9
2300002-122200.010: RNCC: 5 | RNVC: 9

11 May 1984

5340-12-182-1834
Electrical-Mechanical Equipment Post

121821834
5801215-1021-005: RNCC: 3 | RNVC: 2
5801215-1021.005: RNCC: 5 | RNVC: 2

18 Jan 1980

5340-12-701-9449
Rod End Clevis

127019449
VG95211-ML-127019449: RNCC: 2 | RNVC: 2
5.12.0605.0804.98: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-12-329-6257
Beam Gripping Clamp

123296257
MKD15/21: RNCC: 3 | RNVC: 2
7.153: RNCC: 5 | RNVC: 2

10 Sep 1992

5340-12-701-8074
Butt Hinge

127018074
VG95211-ML-127018074: RNCC: 2 | RNVC: 2
5.12.8700.8461.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-180-9393
Mounting Bracket

121809393
23223-060000.19.0: RNCC: 2 | RNVC: 2
1212851: RNCC: 3 | RNVC: 2
23223-060000.19.0: RNCC: 5 | RNVC: 2
23223-060000-19-0: RNCC: 5 | RNVC: 2
23223-060000-19-0: RNCC: 5 | RNVC: 9
23223-060000.19.0: RNCC: 5 | RNVC: 9

12 Oct 1979

5340-12-349-9439
Mounting Plate

123499439
2500238-110100.009.0: RNCC: 2 | RNVC: 2
2500238-110100.009.0: RNCC: 3 | RNVC: 2

27 Jan 2000

5340-12-184-2016
T Bracket

121842016
5801357-1100.03: RNCC: 2 | RNVC: 2
5801357-1100.03: RNCC: 3 | RNVC: 2
5801357-1100-03: RNCC: 5 | RNVC: 9
5801357-1100-03: RNCC: 5 | RNVC: 9
5801357-1100-03: RNCC: 5 | RNVC: 9

3 Jul 1980

5340-12-701-8717
Dust And Moisture Seal Protective Cap

127018717
VG95211-ML-127018717: RNCC: 2 | RNVC: 2
7.49.4003.0098.98: RNCC: 3 | RNVC: 2
0501403153799: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-387-4855
Loop Clamp

123874855
DIN3016-1-D1-60X20-W1-2-NBR: RNCC: 2 | RNVC: 2

29 Dec 2011

5340-12-310-0089
Electrical-Mechanical Equipment Post

123100089
VG95148C10XM6X48-ST: RNCC: 2 | RNVC: 2
VG95148C10XM6X48-ST: RNCC: 3 | RNVC: 2
0224 5003: RNCC: 3 | RNVC: 2
2245003: RNCC: 5 | RNVC: 2
02245003EE0155-57: RNCC: 5 | RNVC: 2

27 Mar 1987

5340-12-326-2292
Door Button

123262292
6100131-110330: RNCC: 2 | RNVC: 2
6100131-110330: RNCC: 3 | RNVC: 2

20 Aug 1991

5340-12-155-4788
Retaining Strap

121554788
160-74872-02: RNCC: 3 | RNVC: 2
160-74872-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-302-8338
Angle Bracket

123028338
4900123-4300.00: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-12-333-2094
Angle Bracket

123332094
U100-3423-105: RNCC: 2 | RNVC: 2
U100-3423-105: RNCC: 3 | RNVC: 2

10 Nov 1993

5340-12-363-8747
Installations Guard

123638747
2500246-989000.00: RNCC: 2 | RNVC: 2
2768.01-9000.01: RNCC: 3 | RNVC: 2
2500246-989000.00: RNCC: 5 | RNVC: 2

31 Jul 2004

5340-12-326-4297
Loop Clamp

123264297
DIN3016-1-A1-14X15-W5: RNCC: 2 | RNVC: 2
RS1.14/15-W5: RNCC: 3 | RNVC: 2
DIN3016-A1-14X15-W5: RNCC: 3 | RNVC: 2
RS1-14-15W5: RNCC: 5 | RNVC: 2
DIN3016-A1-14X15-W5: RNCC: 5 | RNVC: 9

13 Sep 1991

5340-12-344-3990
Mounting Bracket

123443990
P-296883-060: RNCC: 3 | RNVC: 2
P296883-060: RNCC: 5 | RNVC: 2

23 Oct 1997

5340-12-186-5319
Angle Bracket

121865319
1000086-101223.09: RNCC: 2 | RNVC: 2
1000086-101223-09: RNCC: 5 | RNVC: 2
1000086-101223-09: RNCC: 5 | RNVC: 9
1000086-101223-09: RNCC: 5 | RNVC: 9

14 Jan 1981

5340-12-332-7989
Access Cover

123327989
160-75733: RNCC: 3 | RNVC: 2
15160-75733: RNCC: 5 | RNVC: 2
160-75733: RNCC: 5 | RNVC: 9

21 Sep 1993

5340-12-307-1096
Electrical-Mechanical Equipment Post

123071096
TD2101/03: RNCC: 3 | RNVC: 2

12 May 1986

5340-12-326-5528
Mounting Bracket

123265528
2580.720384: RNCC: 3 | RNVC: 2
KS/RAT/87: RNCC: 5 | RNVC: 2

7 Oct 1991

5340-12-179-1792
Platte

121791792
5800828-13424-012: RNCC: 3 | RNVC: 2
5800828-13424.012: RNCC: 5 | RNVC: 2

15 Jun 1979

5340-12-199-6263
Bridge Clamp

121996263
43712533-601: RNCC: 2 | RNVC: 2
43712533-601: RNCC: 3 | RNVC: 2

17 May 1984

5340-12-316-1615
Lock-Release Lever

123161615
104004: RNCC: 3 | RNVC: 2
400-550.0026: RNCC: 5 | RNVC: 2

28 Dec 1988

5340-12-139-8010

5340-12-701-6049
Mounting Bracket

127016049
VG95211-ML-127016049: RNCC: 2 | RNVC: 2
5.12.7001.1110.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-183-1275
Nonmetallic Bumper

121831275
V22-9-6671-005: RNCC: 3 | RNVC: 2

20 Mar 1980

5340-12-363-1234
Dust And Moisture Seal Protective Plug

123631234
0116 3970: RNCC: 3 | RNVC: 2
H2873-A50,5X48,3X24-PE WEICH-SW: RNCC: 5 | RNVC: 2

5 May 2004

5340-12-386-0203
Manual Control Lever

123860203
5321840091: RNCC: 3 | RNVC: 2

1 Aug 2011

5340-12-392-3249
Vehicle B Carriage

123923249
4100095-982140.002.0: RNCC: 2 | RNVC: 2
4100095-982140.002.0: RNCC: 3 | RNVC: 2

27 May 2013

5340-12-368-8387
T Bracket

123688387
SC1730: RNCC: 3 | RNVC: 2

26 Apr 2006

5340-12-335-8678
Loop Clamp

123358678
4900317-610020.00: RNCC: 2 | RNVC: 2
4900317-610020.00: RNCC: 5 | RNVC: 2

27 Sep 1994

5340-12-301-7700
Nonmetallic Bumper

123017700
4178332: RNCC: 3 | RNVC: 2
S12B.K0 .03.00.008: RNCC: 5 | RNVC: 2

8 Nov 1984

5340-12-365-3939
Webbing Strap

123653939
80303450: RNCC: 3 | RNVC: 2

28 Dec 2004

5340-12-701-4604
Loop Clamp

127014604
VG95211-ML-127014604: RNCC: 2 | RNVC: 2
5.12.5314.8050.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-383-9476
Lock Key

123839476
6.777-064.0: RNCC: 3 | RNVC: 2

28 Dec 2010

5340-12-184-0774
Compression Cup

121840774
T18-11 18X8,5X7/3-88NBR/101: RNCC: 3 | RNVC: 2
T18-11-14PA101: RNCC: 5 | RNVC: 2
T18-11-88NBR101: RNCC: 5 | RNVC: 2
85-800-3245: RNCC: 6 | RNVC: 9

19 Jun 1980

5340-12-333-9258
Mending Plate

123339258
532709-0035.000: RNCC: 3 | RNVC: 2
532709-0035.000: RNCC: 5 | RNVC: 9

24 Feb 1994

5340-12-361-0322
Angle Bracket

123610322
J28130091-003: RNCC: 3 | RNVC: 2

12 Aug 2003

5340-12-384-4222
Mounting Bracket

123844222
H88004: RNCC: 3 | RNVC: 2

23 Feb 2011

5340-12-339-0368
Butt Hinge

123390368
100061403: RNCC: 3 | RNVC: 2
0008990051: RNCC: 5 | RNVC: 2

29 Sep 1995

5340-12-314-4330
Dust And Moisture Seal Protective Plug

123144330
0009970620: RNCC: 3 | RNVC: 2
000 997 06 20: RNCC: 5 | RNVC: 2

6 Jul 1988

5340-12-148-3217
Handwheel

121483217
VG85088-B-100X9-GT: RNCC: 2 | RNVC: 2
VG85088-B-100X9-GT: RNCC: 3 | RNVC: 2
VG85088-B-100X9-GT: RNCC: 3 | RNVC: 2
VG85088-B-100X9-GT: RNCC: 3 | RNVC: 9
B100X9VG85088GTW40: RNCC: 5 | RNVC: 9
B100X9VG85088-GTW40: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-4009
Mounting Bracket

127024009
VG95211-ML-127024009: RNCC: 2 | RNVC: 2
5.12.5314.0760.92: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-7828
Mounting Bracket

127017828
VG95211-ML-127017828: RNCC: 2 | RNVC: 2
5.12.7800.8190.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-2730
Retaining Bail

127012730
VG95211-ML-127012730: RNCC: 2 | RNVC: 2
5.12.4806.1580.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-359-4380
Loop Clamp

123594380
DIN3016-1-D1-40X15-W1-2-NBR: RNCC: 2 | RNVC: 2

5 Feb 2003

5340-12-361-6345
Mounting Plate

123616345
704-121405-911-0: RNCC: 3 | RNVC: 2

28 Oct 2003

5340-12-315-9242
Spring Holder

123159242
111-00-8832-0573/01-00-025: RNCC: 2 | RNVC: 2
1000232-01-02-00-00-016: RNCC: 3 | RNVC: 2
111-00-8832-0573/01-00-025: RNCC: 5 | RNVC: 9

7 Dec 1988

5340-12-323-5194
Resilient Mount

123235194
505029-M14X25-M14X37.NR45.ST: RNCC: 3 | RNVC: 2
781149-M14X25-M14X37-WEICH: RNCC: 3 | RNVC: 2
42083743: RNCC: 3 | RNVC: 2
42083743ED50-4245: RNCC: 5 | RNVC: 2
VG95363D80X70M14X25-M14X37NR45ST: RNCC: 5 | RNVC: 9

4 Dec 1990

5340-12-170-1126
Access Cover

121701126
1264-3265.216: RNCC: 2 | RNVC: 2
1264-3265-216: RNCC: 3 | RNVC: 2
530003-0012.000: RNCC: 3 | RNVC: 2
1264-3265-216: RNCC: 5 | RNVC: 9
530003-0012.000: RNCC: 5 | RNVC: 9
530003-12: RNCC: 5 | RNVC: 9
1264-3265-216: RNCC: 5 | RNVC: 9

27 Jun 1977

5340-12-171-1063
Electrical-Mechanical Equipment Post

121711063
N33-019: RNCC: 3 | RNVC: 2

9 Sep 1977

5340-12-386-7497
Mounting Bracket

123867497
T251M4925101: RNCC: 3 | RNVC: 2

28 Sep 2011

5340-12-196-2250
Retaining Strap

121962250
81974010528: RNCC: 3 | RNVC: 2

14 Jun 1983

5340-12-340-7796
Rim Latch

123407796
6020139: RNCC: 3 | RNVC: 2
2795.238: RNCC: 5 | RNVC: 2

11 Jun 1996

5340-12-377-0277
Buckle

123770277
10026847: RNCC: 3 | RNVC: 2

8 Dec 2008

5340-12-321-3538
Electrical-Mechanical Equipment Post

123213538
119323: RNCC: 3 | RNVC: 2

9 May 1990

5340-12-193-9576
Resilient Mount

121939576
E1FH 781 S01: RNCC: 3 | RNVC: 2
450904-9158: RNCC: 5 | RNVC: 2
E1FH781-S01: RNCC: 5 | RNVC: 2

20 Sep 1982

5340-12-335-4277
Access Cover

123354277
8 695 521 371: RNCC: 3 | RNVC: 2

18 Aug 1994

5340-12-701-6343
Mounting Plate

127016343
5.12.7060.1410.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-386-1030
Access Cover

123861030
2719-943000.006.0: RNCC: 3 | RNVC: 2

9 Aug 2011

5340-12-389-3806
Angle Bracket

123893806
1.315-200200.02: RNCC: 2 | RNVC: 2
1.315-200200.02: RNCC: 5 | RNVC: 2

28 Jun 2012

5340-12-371-8086
Mending Plate

123718086
060491E: RNCC: 3 | RNVC: 2
060 491 E: RNCC: 5 | RNVC: 2

18 May 2007

5340-12-302-6161
Split Tubular Clip

123026161
YK03300100: RNCC: 3 | RNVC: 2
H.B 913SV 1056 1975 03 30 0100: RNCC: 5 | RNVC: 9
03300100: RNCC: 5 | RNVC: 9

17 Jan 1985

5340-12-194-3830
Webbing Strap

121943830
4618900294: RNCC: 3 | RNVC: 2
721 1 84 194 2: RNCC: 5 | RNVC: 9

28 Oct 1982

5340-12-362-3173
Double Angle Bracket

123623173
0318235780: RNCC: 3 | RNVC: 2
3KK889: RNCC: 5 | RNVC: 2
03.182.35.78.0: RNCC: 5 | RNVC: 2

5 Feb 2004

5340-12-355-5364
Mechanical Stop

123555364
2125-131160.01B: RNCC: 2 | RNVC: 2
2125-131160.01B: RNCC: 3 | RNVC: 2
20.137-601: RNCC: 3 | RNVC: 9

22 Nov 2001

5340-12-166-9400
Resilient Mount

121669400
845.2518052EZ5045-42: RNCC: 3 | RNVC: 2
JQ7-61-14B: RNCC: 3 | RNVC: 9
0251 8051: RNCC: 5 | RNVC: 2
02518051: RNCC: 5 | RNVC: 2
2518051EZ5045-42: RNCC: 5 | RNVC: 2
02518052: RNCC: 5 | RNVC: 9
2518052UD5045-42: RNCC: 5 | RNVC: 9

6 Nov 1976

5340-12-350-5916
Bridge Clamp

123505916
160-88343-01: RNCC: 3 | RNVC: 2
160-88343-01: RNCC: 5 | RNVC: 9

18 Apr 2000

5340-12-342-9300
Helical Compression Spring Retainer

123429300
5011-045: RNCC: 3 | RNVC: 2

16 Apr 1997

5340-12-155-9038
Spring Tension Clip

121559038
1501.211-7: RNCC: 2 | RNVC: 2
1501.211-7: RNCC: 3 | RNVC: 2
1501-211-7: RNCC: 5 | RNVC: 2
31501211007: RNCC: 5 | RNVC: 2
1501.211-7: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-311-3990
Webbing Strap

123113990
5400029-800: RNCC: 2 | RNVC: 2
5400029-800: RNCC: 5 | RNVC: 9

27 Aug 1987

5340-12-367-4030
Access Cover

123674030
943374599: RNCC: 3 | RNVC: 2

15 Aug 2005

5340-12-138-6064

5340-12-315-3945
Bridge Clamp

123153945
035905251B: RNCC: 3 | RNVC: 2

19 Oct 1988

5340-12-318-4519
Mounting Bracket

123184519
9522001504: RNCC: 3 | RNVC: 2

17 Jul 1989

5340-12-323-5732
Butt Hinge Leaf

123235732
160-25794-50: RNCC: 3 | RNVC: 2
160-25794-50: RNCC: 5 | RNVC: 9

7 Dec 1990

5340-12-024-3691

5340-12-392-3623
Access Cover

123923623
I006079TAN686A: RNCC: 3 | RNVC: 2

29 May 2013

5340-12-367-0443
Mounting Bracket

123670443
PIKVI15VA: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-12-323-5961
Lock-Release Lever

123235961
2982371099: RNCC: 3 | RNVC: 2

11 Dec 1990

5340-12-312-3453
Resilient Mount

123123453
1202-4B: RNCC: 3 | RNVC: 2
7039370: RNCC: 5 | RNVC: 2
1202-4-M8: RNCC: 5 | RNVC: 2

18 Dec 1987

5340-12-301-8868
Nonmetallic Solid Wheel

123018868
NO PRIMARY REF 12-301-8868: RNCC: 3 | RNVC: 2
0-1-47-28: RNCC: 5 | RNVC: 9
0/1/47-28: RNCC: 5 | RNVC: 9

15 Nov 1984

5340-12-158-0040
Retaining Strap

121580040
23305-206000.17.0: RNCC: 2 | RNVC: 2
23305-206000-17-0: RNCC: 5 | RNVC: 2
23305-206000-17-0: RNCC: 5 | RNVC: 9
23305-206000.17.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-6934
Mounting Plate

127016934
VG95211-ML-127016934: RNCC: 2 | RNVC: 2
5.12.7221.8003.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-149-9100
Nonmetallic Bumper

121499100
96007201: RNCC: 3 | RNVC: 2
515-401-B-14.00: RNCC: 3 | RNVC: 2
515-401B14-00: RNCC: 5 | RNVC: 2
515-401-B-14.00: RNCC: 5 | RNVC: 2
845-515-401B14-00: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-343-6518
Loop Clamp

123436518
DIN3016-1-E1-60X25-W1-2-CR: RNCC: 2 | RNVC: 2
RSGU0.60/25-W1: RNCC: 3 | RNVC: 2
1227 0208: RNCC: 5 | RNVC: 2
RSGU0.60/25: RNCC: 5 | RNVC: 2
DIN3016-E1-60X25-W1-2: RNCC: 5 | RNVC: 9

10 Jul 1997

5340-12-186-6991
Retaining Strap

121866991
2300109-059100.005.0: RNCC: 3 | RNVC: 2
2300109-059100-005-0: RNCC: 3 | RNVC: 2
2300109-059100-005-0: RNCC: 5 | RNVC: 9
2300109-059100.005.0: RNCC: 5 | RNVC: 9

28 Jan 1981

5340-12-386-0497
Mounting Bracket

123860497
7-306-0197: RNCC: 3 | RNVC: 2

3 Aug 2011

5340-12-173-9997
Loop Clamp

121739997
8454778: RNCC: 3 | RNVC: 2
1102139: RNCC: 5 | RNVC: 2
1102-139: RNCC: 5 | RNVC: 2

29 May 1978

5340-12-371-3812
Bow Handle

123713812
81614415000: RNCC: 3 | RNVC: 2
81.61441-5000: RNCC: 5 | RNVC: 2
81.61441.5000: RNCC: 5 | RNVC: 2

22 Mar 2007

5340-12-345-4467
Mounting Bracket

123454467
54.0053.448.13: RNCC: 3 | RNVC: 2

17 Mar 1998

5340-12-356-7251
Mounting Bracket

123567251
7766012: RNCC: 2 | RNVC: 2
7766012: RNCC: 3 | RNVC: 2
99707766012: RNCC: 5 | RNVC: 9

27 Mar 2002

5340-12-305-2932
Metal Runner

123052932
5801758-1011.00: RNCC: 2 | RNVC: 2
018-1011.00: RNCC: 3 | RNVC: 2
5801758-1011.00: RNCC: 3 | RNVC: 2

17 Oct 1985

5340-12-353-8597
Angle Bracket

123538597
J92220322-001: RNCC: 3 | RNVC: 2

16 May 2001

5340-12-307-6736
Angle Bracket

123076736
537176-8225.000: RNCC: 3 | RNVC: 2
537176-8225: RNCC: 5 | RNVC: 9
537176-8225.000: RNCC: 5 | RNVC: 9

16 Jul 1986

5340-12-702-5982
Loop Clamp

127025982
VG95211-ML-127025982: RNCC: 2 | RNVC: 2
5148A-26: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-356-8450
Angle Bracket

123568450
ED88-0100-01001-127: RNCC: 3 | RNVC: 2

10 Apr 2002

5340-12-191-2520
Angle Bracket

121912520
2500058-130150.00: RNCC: 2 | RNVC: 2
2500058-130150.00: RNCC: 3 | RNVC: 2
2500058-130150.00: RNCC: 3 | RNVC: 2
2500058-130150.00: RNCC: 5 | RNVC: 2
2500058-130150.00: RNCC: 5 | RNVC: 9
2500058-130150.00: RNCC: 5 | RNVC: 9

20 Jan 1982

5340-12-305-9816
Loop Clamp

123059816
1865-010330.01.0: RNCC: 3 | RNVC: 2

16 Jan 1986

5340-12-195-7124
Metal Runner

121957124
5800043-2010.01: RNCC: 2 | RNVC: 2
5800043-2010.01: RNCC: 3 | RNVC: 2
5800043-2010-01: RNCC: 5 | RNVC: 2
5800043-2010-01: RNCC: 5 | RNVC: 9
5800043-2010.01: RNCC: 5 | RNVC: 9

31 Mar 1983

5340-12-339-7906
Nonmetallic Bumper

123397906
2654-331552.00: RNCC: 2 | RNVC: 2
2654-331552.00: RNCC: 3 | RNVC: 2
K6101-1400.00: RNCC: 3 | RNVC: 2
K6101-1400.00: RNCC: 5 | RNVC: 9
2654-331 552.00: RNCC: 5 | RNVC: 9
2654-331 552.00: RNCC: 5 | RNVC: 9
2654-331 552.00: RNCC: 5 | RNVC: 9

18 Jan 1996

5340-12-329-8696
Pad Eye

123298696
VG95211-ML-123298696: RNCC: 2 | RNVC: 2
65209-09033Y101: RNCC: 3 | RNVC: 2
65209-09033Y101: RNCC: 5 | RNVC: 2

8 Oct 1992

5340-12-304-5651
Lock-Release Lever

123045651
6200001-009: RNCC: 2 | RNVC: 2
T61225: RNCC: 3 | RNVC: 2
6200001-009: RNCC: 5 | RNVC: 2
6200001-009: RNCC: 5 | RNVC: 2
6200001-009: RNCC: 5 | RNVC: 9

31 Jul 1985

5340-12-328-4957
Retaining Band

123284957
2653-186700.01: RNCC: 2 | RNVC: 2
2653-186700.01: RNCC: 3 | RNVC: 2

26 May 1992

5340-12-319-0241
Resilient Mount

123190241
C3521621: RNCC: 3 | RNVC: 9
42077568: RNCC: 5 | RNVC: 2
42077568EZ5038-42: RNCC: 5 | RNVC: 2

30 Aug 1989

5340-12-329-9127
Electrical-Mechanical Equipment Post

123299127
VG95148B5XM3X35-CUZN: RNCC: 2 | RNVC: 2
DI5-M3X35: RNCC: 3 | RNVC: 2

13 Oct 1992

5340-12-383-2833
Mechanic Equipment Hardware Kit

123832833
NYX-DT-0825-10: RNCC: 3 | RNVC: 2

1 Oct 2010

5340-12-167-3509
Dust And Moisture Seal Protective Plug

121673509
GPN660/334: RNCC: 3 | RNVC: 2
660-334: RNCC: 5 | RNVC: 2
660-334GPN660: RNCC: 5 | RNVC: 2
660033400: RNCC: 5 | RNVC: 2
GPN660-334: RNCC: 5 | RNVC: 2

16 Dec 1976

5340-12-174-7905
Door Button

121747905
009-039.160-010: RNCC: 3 | RNVC: 2
12791-130000-010: RNCC: 5 | RNVC: 2
12791-130000-010: RNCC: 5 | RNVC: 9
12791-130000.010: RNCC: 5 | RNVC: 9
009-039-160-010: RNCC: 5 | RNVC: 9

3 Aug 1978

5340-12-180-5708
Angle Bracket

121805708
C381-A28-C60: RNCC: 2 | RNVC: 2
C381A28C60: RNCC: 3 | RNVC: 2
C381-A28-C60: RNCC: 5 | RNVC: 2
C381A28C60: RNCC: 5 | RNVC: 2
C381-A28-C60: RNCC: 5 | RNVC: 2

19 Sep 1979

5340-12-312-2504
Catch Strike

123122504
100000563: RNCC: 2 | RNVC: 2
331785: RNCC: 3 | RNVC: 2
10-0000-563: RNCC: 5 | RNVC: 2
100000563: RNCC: 5 | RNVC: 2
10 0000 563: RNCC: 5 | RNVC: 2

9 Dec 1987

5340-12-198-7456
Double Angle Bracket

121987456
4174800: RNCC: 3 | RNVC: 2
4174800: RNCC: 5 | RNVC: 2
41748-00: RNCC: 5 | RNVC: 2

22 Feb 1984

5340-12-357-2242
Loop Clamp

123572242
RSGU1.63/25: RNCC: 3 | RNVC: 2

23 May 2002

5340-12-391-3718
Loop Clamp

123913718
445043: RNCC: 3 | RNVC: 2

8 Mar 2013

5340-12-366-0534
Expansion Shield

123660534
0019880725: RNCC: 3 | RNVC: 2

3 Mar 2005

5340-12-366-1613
Flush Lock

123661613
101906: RNCC: 3 | RNVC: 2

16 Mar 2005

5340-12-391-4636
Access Cover

123914636
I001655TAN686A: RNCC: 3 | RNVC: 2

13 Mar 2013

5340-12-383-4645
Loop Clamp

123834645
085 4 042: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-12-374-7865
Mounting Bracket

123747865
10118-182210.000.0: RNCC: 2 | RNVC: 2
10118-182210.000.0: RNCC: 3 | RNVC: 2

20 Mar 2008

5340-12-393-1859
Locking Shackle

123931859
1030124-206200.007.0: RNCC: 3 | RNVC: 2

15 Aug 2013

5340-12-341-7230
Resilient Mount Adapter

123417230
3-410.0200: RNCC: 3 | RNVC: 2
3-410.0200: RNCC: 5 | RNVC: 2

18 Oct 1996

5340-12-378-3940
Doorstop

123783940
3.30.124.0(841): RNCC: 3 | RNVC: 2

1 Apr 2009

5340-12-378-1803
Catch Strike

123781803
2300232-828000.003.0: RNCC: 3 | RNVC: 2

18 Mar 2009

5340-12-343-8276
Nonmetallic Bumper

123438276
4.0057: RNCC: 3 | RNVC: 2
2695434: RNCC: 5 | RNVC: 2

4 Aug 1997

5340-12-344-4700
Nonmetallic Bumper

123444700
2500255-332200.09.0: RNCC: 2 | RNVC: 2
2500255-332200.09.0: RNCC: 3 | RNVC: 2
2500255-332200.09.0: RNCC: 5 | RNVC: 2

30 Oct 1997

5340-12-199-3301
Mending Plate

121993301
3184923841: RNCC: 3 | RNVC: 2

12 Apr 1984

5340-12-356-5151
Mechanical Stop

123565151
47761A: RNCC: 3 | RNVC: 2

7 Mar 2002

5340-12-359-6761
Mounting Bracket

123596761
2500261-180000.233.0: RNCC: 2 | RNVC: 2
2500261-180000.233.0: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-12-343-1980
Nonmetallic Bumper

123431980
5502-530: RNCC: 3 | RNVC: 2

15 May 1997

5340-12-371-2739
Retaining Strap

123712739
SK861-060000.015.0: RNCC: 3 | RNVC: 2

8 Mar 2007

5340-12-701-8457
Loop Clamp

127018457
VG95211-ML-127018457: RNCC: 2 | RNVC: 2
5150A-18: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-339-7640
Nonmetallic Bumper

123397640
2500255-000400.004.0: RNCC: 2 | RNVC: 2
2500255-000400.004.0: RNCC: 3 | RNVC: 2

15 Jan 1996

5340-12-371-6155
Double Angle Bracket

123716155
23302-260000.35: RNCC: 2 | RNVC: 2
3-1778-179: RNCC: 3 | RNVC: 2
8406841: RNCC: 5 | RNVC: 9

26 Apr 2007

5340-12-380-2915
Manual Control Lever

123802915
18054-WDS-D 111-31: RNCC: 3 | RNVC: 2

15 Oct 2009

5340-12-701-3226
Mounting Plate

127013226
VG95211-ML-127013226: RNCC: 2 | RNVC: 2
5.12.5101.8130.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-365-1623
Retaining Strap

123651623
2300109-060000.014.0: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-12-364-3930
Angle Bracket

123643930
5981-181900.005.0: RNCC: 3 | RNVC: 2

18 Sep 2004

5340-12-350-9058
Helical Compression Spring Seat

123509058
5.112-071: RNCC: 3 | RNVC: 2

5 Jun 2000

5340-12-348-8954
Retaining Clip

123488954
1682-004361.000.0: RNCC: 2 | RNVC: 2
1682-004361.000.0: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-12-198-5635
Resilient Mount

121985635
2K2-BAM-40-G: RNCC: 3 | RNVC: 2
2K2-BAM-40-G: RNCC: 5 | RNVC: 9
2K2BAM40G: RNCC: 5 | RNVC: 9

9 Feb 1984

5340-12-304-7505
Loop Clamp

123047505
0121 6752: RNCC: 3 | RNVC: 2
01216752ED8932-22: RNCC: 5 | RNVC: 2

19 Aug 1985

5340-12-305-5804
Double Angle Bracket

123055804
384692: RNCC: 3 | RNVC: 2

25 Nov 1985

5340-12-391-9914
Loop Clamp

123919914
9498310079: RNCC: 3 | RNVC: 2

24 Apr 2013

5340-12-360-2064
Caster Wheel

123602064
1510.2160.00: RNCC: 3 | RNVC: 2
130PA/030/011/08: RNCC: 5 | RNVC: 2
P-R163-1: RNCC: 5 | RNVC: 2

17 Apr 2003

5340-12-149-7693
Nonmetallic Bumper

121497693
5800600-0951.000: RNCC: 2 | RNVC: 2
5800600-0951.000: RNCC: 3 | RNVC: 2
7409590001: RNCC: 5 | RNVC: 2
ST5800600-0951.000: RNCC: 5 | RNVC: 9
5800600-0951-000: RNCC: 5 | RNVC: 9
ST5800600-0951-000: RNCC: 5 | RNVC: 9
74095 90001: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-315-5992
Retaining Strap

123155992
DIN3016-1-F1-46X20-W5-CR: RNCC: 2 | RNVC: 2
DIN3016-F1-46X20-W5: RNCC: 3 | RNVC: 2
RSGU2.46/20-W5: RNCC: 3 | RNVC: 2
DIN3016-F1-46X20-W5: RNCC: 5 | RNVC: 9
VG95931F46X20W5: RNCC: 5 | RNVC: 9

11 Nov 1988

5340-12-349-9087
Angle Bracket

123499087
58R137-1343-1: RNCC: 2 | RNVC: 2
58R137-1343-1: RNCC: 3 | RNVC: 2
20315737: RNCC: 5 | RNVC: 2

24 Jan 2000

5340-12-331-8741
Webbing Strap

123318741
01811-2-ARMEE (BE): RNCC: 3 | RNVC: 2
01811-2.01216-5: RNCC: 5 | RNVC: 2
SSTH1004.001: RNCC: 5 | RNVC: 2
126-782: RNCC: 5 | RNVC: 2
01811-2-01216-5-LE2500-FE500-ARS: RNCC: 5 | RNVC: 2

30 Jun 1993

5340-12-306-6545
Mending Plate

123066545
28.04.303-010.68: RNCC: 3 | RNVC: 2
284-303-010-680: RNCC: 5 | RNVC: 2

19 Mar 1986

5340-12-187-1056
Retaining Strap

121871056
53-1195-018-02: RNCC: 3 | RNVC: 2

5 Mar 1981

5340-12-319-3839
Nonmetallic Bumper

123193839
C119-A31-C310: RNCC: 3 | RNVC: 2

27 Sep 1989

5340-12-308-8323
Electrical-Mechanical Equipment Post

123088323
VG95148D6XM3X11-NRST: RNCC: 2 | RNVC: 2
VG95148D6XM3X11-NRST: RNCC: 3 | RNVC: 2
KM.S01-120180.006: RNCC: 3 | RNVC: 2

21 Nov 1986

5340-12-361-3349
Mechanical Stop

123613349
51904410105: RNCC: 3 | RNVC: 2
51.90441-0105: RNCC: 5 | RNVC: 2

18 Sep 2003

5340-12-199-7196
Double Angle Bracket

121997196
43712522-301: RNCC: 2 | RNVC: 2
43712522-301: RNCC: 3 | RNVC: 2

25 May 1984

5340-12-358-5865
Double Angle Bracket

123585865
J92228169-004: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-12-193-0432
Hasp Staple

121930432
844-32-012000003-0A: RNCC: 3 | RNVC: 2
844.32-012000003-0A: RNCC: 5 | RNVC: 2
0A844.32-01-20-00-003: RNCC: 5 | RNVC: 2

16 Jun 1982

5340-12-375-3025
Corrosion Preventive Anode

123753025
6453020001: RNCC: 3 | RNVC: 2

19 May 2008

5340-12-335-6275
Folding Stay

123356275
54.2551.411.00: RNCC: 3 | RNVC: 2

7 Sep 1994

5340-12-375-2305
Mounting Plate

123752305
L311M1801205: RNCC: 3 | RNVC: 2

6 May 2008

5340-12-145-6928
Expansion Plug

121456928
3129970720: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-322-0031
Access Cover

123220031
CF 454 489 AE: RNCC: 2 | RNVC: 2
CF 454 489 AE: RNCC: 3 | RNVC: 2
CF 454 489 AE: RNCC: 5 | RNVC: 2

17 Jul 1990

5340-12-380-0360
Mounting Plate

123800360
389897: RNCC: 3 | RNVC: 2

21 Sep 2009

5340-12-146-7146
Nut And Bolt Locking Plate

121467146
0730 749 030: RNCC: 3 | RNVC: 2
000N24015: RNCC: 5 | RNVC: 2
000N24015: RNCC: 5 | RNVC: 2
0730749030: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-336-6315
Plug Button

123366315
V6179: RNCC: 3 | RNVC: 2
V6179: RNCC: 5 | RNVC: 9

2 Dec 1994

5340-12-337-9558
Lock-Release Lever

123379558
4626701: RNCC: 3 | RNVC: 2
EZ46267: RNCC: 5 | RNVC: 2

4 May 1995

5340-12-337-9934
Mending Plate

123379934
4667201: RNCC: 3 | RNVC: 2
EZ46672: RNCC: 5 | RNVC: 2

9 May 1995

5340-12-367-4401
Loop Clamp

123674401
883 10: RNCC: 3 | RNVC: 2

18 Aug 2005

5340-12-311-8997
Dust And Moisture Seal Protective Plug

123118997
0733 361 073: RNCC: 3 | RNVC: 2
81321060078: RNCC: 5 | RNVC: 2
81.32106.0078: RNCC: 5 | RNVC: 9
0733361073: RNCC: 5 | RNVC: 9

28 Oct 1987

5340-12-347-9736
Mounting Bracket

123479736
3718489: RNCC: 3 | RNVC: 2

18 Mar 1999

5340-12-326-5667
Lock-Release Lever

123265667
1490-9170.00: RNCC: 3 | RNVC: 2
1490-9170.00: RNCC: 5 | RNVC: 2

8 Oct 1991

5340-12-385-2529
Butt Hinge Leaf

123852529
1091558: RNCC: 3 | RNVC: 2

13 May 2011

5340-12-384-3841
Mechanic Equipment Hardware Kit

123843841
51001112: RNCC: 3 | RNVC: 2

18 Feb 2011

5340-12-354-4179
Access Cover

123544179
03951800: RNCC: 3 | RNVC: 2

10 Jul 2001

5340-12-142-6432

5340-12-701-2169
Mounting Bracket

127012169
VG95211-ML-127012169: RNCC: 2 | RNVC: 2
5.12.0605.0571.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-358-3149
Mounting Plate

123583149
2500262-199400.002.0: RNCC: 2 | RNVC: 2
2500262-199400.002.0: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-12-701-7129
Loop Clamp

127017129
VG95211-ML-127017129: RNCC: 2 | RNVC: 2
5.12.7601.3260.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-322-7173
Mounting Plate

123227173
250148-198810.00.0: RNCC: 3 | RNVC: 2

14 Sep 1990

5340-12-348-8863
Mounting Bracket

123488863
245/7346-46-30-00: RNCC: 3 | RNVC: 2

31 Aug 1999

5340-12-328-0749
Runner

123280749
8100441-1000.04: RNCC: 2 | RNVC: 2
8100441-1000-04: RNCC: 5 | RNVC: 2

2 Apr 1992

5340-12-327-7007
Butt Hinge

123277007
5802291-20300.02: RNCC: 2 | RNVC: 2
5802291-20300.02: RNCC: 3 | RNVC: 2
4840451-20300.02: RNCC: 3 | RNVC: 2

20 Feb 1992

5340-12-393-7174
Mounting Bracket

123937174
11.44086-0160: RNCC: 3 | RNVC: 2
11.44086-0160: RNCC: 5 | RNVC: 2

7 Oct 2013

5340-12-193-2747
Loop Clamp

121932747
SP8237.040/20-W2: RNCC: 3 | RNVC: 2
18211336553: RNCC: 5 | RNVC: 2
151 8237 040: RNCC: 5 | RNVC: 2
1518237040: RNCC: 5 | RNVC: 2
1336553: RNCC: 5 | RNVC: 9

6 Jul 1982

5340-12-155-4527
Support Hook

121554527
VG95211-ML-121554527: RNCC: 2 | RNVC: 2
160-75551: RNCC: 3 | RNVC: 2
160-74378-33: RNCC: 5 | RNVC: 2
160-75551: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-339-1232
Nonmetallic Bumper

123391232
9897419: RNCC: 3 | RNVC: 9
463-062243.000: RNCC: 5 | RNVC: 9

12 Oct 1995

5340-12-329-2509
Mending Plate

123292509
11.10043-2003: RNCC: 3 | RNVC: 2
11-10043-2003: RNCC: 5 | RNVC: 9

28 Jul 1992

5340-12-390-1644
Mounting Bracket

123901644
100RLS1-251060.000.0: RNCC: 2 | RNVC: 2
100RLS1-251060.000.0: RNCC: 3 | RNVC: 2

11 Oct 2012

5340-12-323-8273
Protection Bellows

123238273
0.0099-06: RNCC: 3 | RNVC: 2

21 Dec 1990

5340-12-371-8030
Turnbuckle

123718030
0580190160: RNCC: 3 | RNVC: 2
05.801.90.16.0: RNCC: 5 | RNVC: 2

16 May 2007

5340-12-377-5514
Mounting Plate

123775514
1772-200300.000.0: RNCC: 2 | RNVC: 2
1772-200300.000.0: RNCC: 3 | RNVC: 2

23 Jan 2009

5340-12-392-8599
Dust And Moisture Seal Protective Plug

123928599
700M16X1,5 RAL3000: RNCC: 3 | RNVC: 2
9561490140: RNCC: 5 | RNVC: 2
GPN700M16X1,5-RAL3000: RNCC: 5 | RNVC: 2
700M16X1,5 RAL3000: RNCC: 5 | RNVC: 2

17 Jul 2013

5340-12-359-6388
Mounting Bracket

123596388
2819.194100.013.0: RNCC: 3 | RNVC: 2

24 Feb 2003

5340-12-330-0839
Dust And Moisture Seal Protective Plug

123300839
720/1599: RNCC: 3 | RNVC: 2
GPN720/1599: RNCC: 5 | RNVC: 2
GPN720-1599: RNCC: 5 | RNVC: 9

30 Oct 1992

5340-12-318-4538
Buckle

123184538
71057: RNCC: 3 | RNVC: 2
01155NO-SSI: RNCC: 3 | RNVC: 2
SE01155: RNCC: 5 | RNVC: 2
71057: RNCC: 5 | RNVC: 2
0966753: RNCC: 5 | RNVC: 2
01155: RNCC: 5 | RNVC: 2
DIN60060-C3-25MM BREIT: RNCC: 5 | RNVC: 9
0966753: RNCC: 5 | RNVC: 9
71057: RNCC: 5 | RNVC: 9

17 Jul 1989

5340-12-373-8475
Double Angle Bracket

123738475
J21520096-405: RNCC: 3 | RNVC: 2

12 Dec 2007

5340-12-363-9066
Mounting Bracket

123639066
J29120376-401: RNCC: 3 | RNVC: 2

4 Aug 2004

5340-12-167-3013
Snap Hook

121673013
NO PRIMARY REF 12-167-3013: RNCC: 3 | RNVC: 2
02823B: RNCC: 5 | RNVC: 9

14 Dec 1976

5340-12-350-8899
Double Angle Bracket

123508899
J27420051-401: RNCC: 3 | RNVC: 2

31 May 2000

5340-12-320-7311
Bow Handle

123207311
NO PRIMARY REF 12-320-7311: RNCC: 3 | RNVC: 2
HGL3: RNCC: 5 | RNVC: 9
314.336: RNCC: 5 | RNVC: 9

12 Feb 1990

5340-12-306-6045
Catch Strike

123066045
28.04.201-010.19: RNCC: 3 | RNVC: 2
284-201-010-190: RNCC: 5 | RNVC: 2

14 Mar 1986

5340-12-164-9856
Dust And Moisture Seal Protective Cap

121649856
2103-29-00.00: RNCC: 3 | RNVC: 2
SCHUTZKAPPE SMK 20: RNCC: 3 | RNVC: 2
2103-29-00-00: RNCC: 5 | RNVC: 2
2103-29-0000: RNCC: 5 | RNVC: 2
SCHUTZKAPPE SMK 20: RNCC: 5 | RNVC: 2
2103-29-00-00: RNCC: 5 | RNVC: 2
32-140-27: RNCC: 5 | RNVC: 2
32-140-27: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-153-5607
Nut And Bolt Locking Plate

121535607
100355-160000.06: RNCC: 2 | RNVC: 2
100355-160000-06: RNCC: 3 | RNVC: 2
100355-160000-06: RNCC: 5 | RNVC: 9
100355-160000-06: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-150-9081
Mending Plate

121509081
BD2E259: RNCC: 3 | RNVC: 9
BD0002E259: RNCC: 5 | RNVC: 2
BD0002E259: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-363-4298
Access Cover

123634298
0002217-810: RNCC: 3 | RNVC: 2

12 Jun 2004

5340-12-332-9155
Retaining Strap

123329155
52.3109.901.01: RNCC: 2 | RNVC: 2
52.3109.901.01: RNCC: 3 | RNVC: 2

5 Oct 1993

5340-12-317-3572
Angle Bracket

123173572
0418 5731: RNCC: 3 | RNVC: 2
4076240: RNCC: 5 | RNVC: 9
0414 2395: RNCC: 5 | RNVC: 9

31 Mar 1989

5340-12-391-4280
Access Cover

123914280
I006233TAN686A: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-12-382-1960
Mounting Bracket

123821960
12.25: RNCC: 3 | RNVC: 2

20 May 2010

5340-12-332-5339
Retaining Strap

123325339
A11A741122110: RNCC: 3 | RNVC: 2

18 Aug 1993

5340-12-310-2801
Metal Runner

123102801
1000104-212400.17: RNCC: 3 | RNVC: 2
1000104-212400.17: RNCC: 5 | RNVC: 9

5 May 1987

5340-12-316-5513
Mending Plate

123165513
6378491: RNCC: 3 | RNVC: 2

25 Jan 1989

5340-12-180-7727
Dust And Moisture Seal Protective Cap

121807727
1410508011: RNCC: 3 | RNVC: 2
1410508011: RNCC: 5 | RNVC: 2
81964100116: RNCC: 5 | RNVC: 2
1410508011: RNCC: 5 | RNVC: 2

1 Oct 1979

5340-12-142-9911
Retaining Strap

121429911
BSN19X20X2: RNCC: 3 | RNVC: 2
15200000019: RNCC: 5 | RNVC: 2
5200000019: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-179-5770
Spring Tension Clip

121795770
0009888378: RNCC: 3 | RNVC: 2

9 Jul 1979

5340-12-338-9668
Electronic Equipment Hardware Kit

123389668
8 695 221 001: RNCC: 3 | RNVC: 2

20 Sep 1995

5340-12-304-6303
Rim Lock

123046303
600E122: RNCC: 3 | RNVC: 2
7362953: RNCC: 5 | RNVC: 2
600 E 122: RNCC: 5 | RNVC: 2
1/4604/1: RNCC: 5 | RNVC: 2

6 Aug 1985

5340-12-339-8406
Handwheel

123398406
1.2257-7: RNCC: 3 | RNVC: 2
193813004: RNCC: 5 | RNVC: 2

23 Jan 1996

5340-12-173-8523
Section Block Clamp

121738523
PAN4273-5: RNCC: 3 | RNVC: 2

17 May 1978

5340-12-341-7638
Double Angle Bracket

123417638
2500255-320210.00.0: RNCC: 2 | RNVC: 2
2500255-320210.00.0: RNCC: 3 | RNVC: 2

24 Oct 1996

5340-12-366-7305
Mounting Bracket

123667305
BD5.250.726.230: RNCC: 3 | RNVC: 2

1 Jun 2005

5340-12-334-3259
Mounting Bracket

123343259
409.089 469: RNCC: 3 | RNVC: 2
409.089 469: RNCC: 5 | RNVC: 9

27 Apr 1994

5340-12-346-9484
Synchro Clamp

123469484
361370: RNCC: 3 | RNVC: 2
361370: RNCC: 5 | RNVC: 2

1 Oct 1998

5340-12-379-5476
Recess Handle

123795476
96201: RNCC: 3 | RNVC: 2

6 Aug 2009

5340-12-339-1394
Dust And Moisture Seal Protective Plug

123391394
1239970286: RNCC: 3 | RNVC: 2
02 3076: RNCC: 5 | RNVC: 2

16 Oct 1995

5340-12-317-6166
Access Cover

123176166
4607 216 019: RNCC: 3 | RNVC: 2
015041: RNCC: 5 | RNVC: 2
4607216019: RNCC: 5 | RNVC: 9
4607216019: RNCC: 5 | RNVC: 9

21 Apr 1989

5340-12-173-4911
Electrical-Mechanical Equipment Post

121734911
VG95148C5XM3X15,5-2.0402.26: RNCC: 2 | RNVC: 2
VG95148C5XM3X15,5-2.0402.26: RNCC: 3 | RNVC: 2
972-02-00-17: RNCC: 3 | RNVC: 2

19 Apr 1978

5340-12-318-8200
Lock-Release Lever

123188200
42042285: RNCC: 3 | RNVC: 2
42042285EE5053-13: RNCC: 5 | RNVC: 2

18 Aug 1989

5340-12-123-0324
Screw Hook

121230324
1547-100MMLANGSTAHLVERZINKT: RNCC: 3 | RNVC: 2
110452: RNCC: 3 | RNVC: 2
ART4-100MMLANGSTAHLVERZINKT: RNCC: 5 | RNVC: 2
ART4-100MMLANGSTAHLVERZINKT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-330-4700
Spring Loaded Cylinder Fastener

123304700
4900274-113230.00: RNCC: 2 | RNVC: 2
4900274-113230.00: RNCC: 3 | RNVC: 2

18 Dec 1992

5340-12-383-6170
Drawer Slide Set

123836170
601242-203500.03: RNCC: 2 | RNVC: 2
601242-203500.03: RNCC: 3 | RNVC: 2

15 Nov 2010

5340-12-383-0560
Loop Clamp

123830560
DIN3016-1-D1-18X20-W5-CR: RNCC: 2 | RNVC: 2

8 Sep 2010

5340-12-178-1520
Access Cover

121781520
2344301: RNCC: 3 | RNVC: 2
5340-12-310-3339: RNCC: 6 | RNVC: 9

22 Mar 1979

5340-12-307-4784
Nonmetallic Bumper

123074784
5802284-400000.02: RNCC: 2 | RNVC: 2
4312 712 64170: RNCC: 3 | RNVC: 2

23 Jun 1986

5340-12-300-6491
Mending Plate

123006491
1000091-1000.07: RNCC: 2 | RNVC: 2
1000091-1000.07: RNCC: 3 | RNVC: 2

21 Aug 1984

5340-12-321-5224
Double Angle Bracket

123215224
5803463-000-10: RNCC: 2 | RNVC: 2
5803463-000-10: RNCC: 3 | RNVC: 2

29 May 1990

5340-12-360-4101
Mounting Bracket

123604101
0009644544: RNCC: 3 | RNVC: 2
0009644544: RNCC: 5 | RNVC: 2

19 May 2003

5340-12-368-6885
Mounting Bracket

123686885
4617500014: RNCC: 3 | RNVC: 2
461 750 00 14: RNCC: 5 | RNVC: 2

6 Apr 2006

5340-12-146-4931

5340-12-180-0665
Resilient Mount

121800665
682515: RNCC: 3 | RNVC: 9

17 Aug 1979

5340-12-375-9843
Angle Bracket

123759843
S252M2048214: RNCC: 3 | RNVC: 2

29 Jul 2008

5340-12-361-4565
Spacing Threaded Standoff

123614565
45410EN: RNCC: 3 | RNVC: 2

6 Oct 2003

5340-12-339-1372
Dust And Moisture Seal Protective Plug

123391372
4069975037: RNCC: 3 | RNVC: 2

16 Oct 1995

5340-12-366-9761
Angle Bracket

123669761
950479177: RNCC: 3 | RNVC: 2

27 Jun 2005

5340-12-375-7122
Dust And Moisture Seal Protective Cap

123757122
2033010072: RNCC: 3 | RNVC: 2
A2033010072: RNCC: 5 | RNVC: 9

26 Jun 2008

5340-12-335-9931
Handle Grip

123359931
03778200: RNCC: 3 | RNVC: 2
03778200.784: RNCC: 5 | RNVC: 2

10 Oct 1994

5340-12-350-2023
Mechanical Stop

123502023
203427: RNCC: 3 | RNVC: 2
203427: RNCC: 5 | RNVC: 2

28 Feb 2000

5340-12-386-5681
Tie Down Adapter

123865681
9018600514: RNCC: 3 | RNVC: 2

12 Sep 2011

5340-12-360-0433
Mounting Bracket

123600433
9415533140: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-372-6042
Lock Key

123726042
210.11.060: RNCC: 3 | RNVC: 2

2 Aug 2007

5340-12-315-6060
Loop Clamp

123156060
06791022: RNCC: 3 | RNVC: 9

11 Nov 1988

5340-12-330-0187
Loop Clamp

123300187
LN9491BK19: RNCC: 2 | RNVC: 2

22 Oct 1992

5340-12-121-5304

5340-12-360-0453
Mounting Plate

123600453
9416640096: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-371-8767
Mounting Plate

123718767
1506194: RNCC: 3 | RNVC: 2
548-060207.00.0: RNCC: 5 | RNVC: 2
15009717: RNCC: 5 | RNVC: 2

24 May 2007

5340-12-134-0949
Stift

121340949
5167-27-08-11: RNCC: 3 | RNVC: 2
5167-27-08.11: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-139-6467
Rod End Clevis

121396467
2526-0154-02: RNCC: 2 | RNVC: 2
2526-0154-02: RNCC: 5 | RNVC: 2
2526-0154-02: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-347-3517
Spacing Threaded Standoff

123473517
2300421-181201.000: RNCC: 2 | RNVC: 2
9915773: RNCC: 3 | RNVC: 2
2300421-181201.000: RNCC: 5 | RNVC: 2
2300421-181201.000: RNCC: 5 | RNVC: 9
9915773: RNCC: 5 | RNVC: 9

1 Dec 1998

5340-12-339-2996
Loop Clamp

123392996
2300194-000103.000: RNCC: 2 | RNVC: 2
9875646: RNCC: 3 | RNVC: 9

7 Nov 1995

5340-12-186-5848
Spring Tension Clip

121865848
C22136-A1000-C11: RNCC: 3 | RNVC: 2
C22136A1000C11: RNCC: 5 | RNVC: 9

19 Jan 1981

5340-12-356-7227
Mechanical Stop

123567227
2733260: RNCC: 3 | RNVC: 2
0906.401.30.00.010: RNCC: 5 | RNVC: 9

27 Mar 2002

5340-12-176-8116
Nonmetallic Bumper

121768116
2300002-122440.004: RNCC: 2 | RNVC: 2
2300002-122440.004: RNCC: 3 | RNVC: 2
2300002-122440-004: RNCC: 5 | RNVC: 2
2300002-122440.004: RNCC: 5 | RNVC: 9
2300002-122440-004: RNCC: 5 | RNVC: 9

20 Dec 1978

5340-12-174-8269
Detent Plunger

121748269
009-030.176-006: RNCC: 3 | RNVC: 2
12790-131000-006: RNCC: 5 | RNVC: 2
12790-131000-006: RNCC: 5 | RNVC: 9
12790-131000.006: RNCC: 5 | RNVC: 9
009-030-176-006: RNCC: 5 | RNVC: 9

7 Aug 1978

5340-12-179-1356
Detent Plunger

121791356
1121-22121.12: RNCC: 3 | RNVC: 2
1121-22121-12: RNCC: 5 | RNVC: 2

8 Jun 1979

5340-12-164-3634
Helical Compression Spring Retainer

121643634
2360-186100.01.0: RNCC: 2 | RNVC: 2
2360-186100.01.0: RNCC: 5 | RNVC: 2
2360-186100.01.0: RNCC: 5 | RNVC: 2
2360-186100-01-0: RNCC: 5 | RNVC: 2
2360-186100-01-0: RNCC: 5 | RNVC: 9
2360-186100.01.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-336-9092
Mounting Bracket

123369092
NO PRIMARY REF 12-336-9092: RNCC: 3 | RNVC: 2
F325 100 003: RNCC: 5 | RNVC: 9
934.41.020: RNCC: 5 | RNVC: 9
93441020: RNCC: 5 | RNVC: 9

23 Dec 1994

5340-12-183-5437
Electrical-Mechanical Equipment Post

121835437
C100ZZ19005-000: RNCC: 3 | RNVC: 2

26 Apr 1980

5340-12-356-7047
Mechanical Stop

123567047
33036-003-030: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-188-5096
Dust And Moisture Seal Protective Cap

121885096
VG95211-ML-121885096: RNCC: 2 | RNVC: 2
4025090312: RNCC: 3 | RNVC: 2

15 Jul 1981

5340-12-339-0521
Clamping Catch

123390521
A105DIN3133BK-MIT VORREIBER: RNCC: 2 | RNVC: 2
6020120 UND 6020121: RNCC: 3 | RNVC: 2
006405008: RNCC: 5 | RNVC: 2
0008990432: RNCC: 5 | RNVC: 2
DIN3133-D105-K25X83MIT VORREIBER: RNCC: 5 | RNVC: 2

4 Oct 1995

5340-12-702-1996
Mounting Bracket

127021996
VG95211-ML-127021996: RNCC: 2 | RNVC: 2
30.7210.570: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-179-1326
Retaining Clip

121791326
614-10-010000005: RNCC: 3 | RNVC: 2
086239: RNCC: 5 | RNVC: 2

8 Jun 1979

5340-12-386-5624
Mounting Bracket

123865624
X52418400002: RNCC: 3 | RNVC: 2
5241870940: RNCC: 5 | RNVC: 9

12 Sep 2011

5340-12-199-1276
Resilient Mount

121991276
3094100922: RNCC: 3 | RNVC: 2

28 Mar 1984

5340-12-360-4773
Mechanical Stop

123604773
82050120: RNCC: 3 | RNVC: 2
82050120: RNCC: 5 | RNVC: 2

23 May 2003

5340-12-384-2189
Pawl Fastener

123842189
1000029417: RNCC: 3 | RNVC: 2

3 Feb 2011

5340-12-343-3332
Turnbuckle

123433332
2996.63.52: RNCC: 3 | RNVC: 2
2996.6352: RNCC: 5 | RNVC: 2

9 Jun 1997

5340-12-354-1403
Double Angle Bracket

123541403
AG02015: RNCC: 3 | RNVC: 2

8 Jun 2001

5340-12-310-2805
Retaining Strap

123102805
1000104-212400.07: RNCC: 3 | RNVC: 2
1000104-212400.07: RNCC: 5 | RNVC: 9

5 May 1987

5340-12-345-4319
Mounting Plate

123454319
54.0053.227.00: RNCC: 3 | RNVC: 2

13 Mar 1998

5340-12-337-9344
Double Angle Bracket

123379344
463 351 03 40: RNCC: 3 | RNVC: 2
4633510340: RNCC: 5 | RNVC: 2

4 May 1995

5340-12-359-7320
Mending Plate

123597320
S281M2054101: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-385-6772
Access Cover

123856772
F1.1692-50-20-00.00-04: RNCC: 3 | RNVC: 2

29 Jun 2011

5340-12-335-3399
Webbing Strap

123353399
374-186313.000: RNCC: 2 | RNVC: 2
374-186313.000: RNCC: 5 | RNVC: 2
374-186313.000: RNCC: 5 | RNVC: 9
9843814: RNCC: 5 | RNVC: 9
374-186313-000: RNCC: 5 | RNVC: 9
000-D6-25X2,0X400-BW-RAL6031: RNCC: 6 | RNVC: 9

11 Aug 1994

5340-12-304-4140
Angle Bracket

123044140
2500093-1200.27: RNCC: 2 | RNVC: 2
2500093-1200.27: RNCC: 3 | RNVC: 2
2500093-1200.27: RNCC: 5 | RNVC: 9

16 Jul 1985

5340-12-304-3384
Shimmy Damper

123043384
86003131: RNCC: 3 | RNVC: 2
86003131KZ5511-27: RNCC: 5 | RNVC: 2

5 Jul 1985

5340-12-355-9943
Access Door Hinge

123559943
8301-0007: RNCC: 3 | RNVC: 2

11 Jan 2002

5340-12-358-9295
Spacing Threaded Standoff

123589295
J0413056D127-000A0-008: RNCC: 3 | RNVC: 2

29 Nov 2002

5340-12-361-4406
Block Clamp

123614406
1873-830000.004.0: RNCC: 3 | RNVC: 2

30 Sep 2003

5340-12-191-4625
Shimmy Damper

121914625
4602801586: RNCC: 3 | RNVC: 2
2230-02: RNCC: 5 | RNVC: 2

4 Feb 1982

5340-12-302-4741
Detent Plunger

123024741
556-397070.070: RNCC: 3 | RNVC: 2
556-397070-070: RNCC: 5 | RNVC: 2

4 Jan 1985

5340-12-363-9148
Lock-Release Lever

123639148
TL4240-0064-15: RNCC: 2 | RNVC: 2
R55124: RNCC: 3 | RNVC: 2
DGY2034019: RNCC: 3 | RNVC: 2
4200-278-1193: RNCC: 5 | RNVC: 9

4 Aug 2004

5340-12-701-1786
Angle Bracket

127011786
VG95211-ML-127011786: RNCC: 2 | RNVC: 2
5.12.0246.8371.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-385-0814
Helical Compression Spring Seat

123850814
F1.1692-50-10-00.00-02: RNCC: 3 | RNVC: 2

28 Apr 2011

5340-12-184-2197
Angle Bracket

121842197
5801352-1100.07: RNCC: 2 | RNVC: 2
5801352-1100.07: RNCC: 3 | RNVC: 2
5801352-1100-07: RNCC: 5 | RNVC: 2
5801352-1100-07: RNCC: 5 | RNVC: 9
5801352-1100-07: RNCC: 5 | RNVC: 9

5 Jul 1980

5340-12-369-7608
Mounting Bracket

123697608
202710630: RNCC: 3 | RNVC: 2
7054449: RNCC: 5 | RNVC: 2

15 Aug 2006

5340-12-195-3515
Strap Hinge

121953515
3227200537: RNCC: 3 | RNVC: 2

9 Feb 1983

5340-12-332-4146
Mending Plate

123324146
DKAV011: RNCC: 3 | RNVC: 2

9 Aug 1993

5340-12-316-7675
Nonmetallic Bumper

123167675
272.362 084: RNCC: 2 | RNVC: 2
272.362.084: RNCC: 3 | RNVC: 2
272.362 084: RNCC: 5 | RNVC: 9

9 Feb 1989

5340-12-094-1703

5340-12-024-0700

5340-12-041-0515

5340-12-175-7022
Angle Bracket

121757022
CF 418 181 AX: RNCC: 2 | RNVC: 2
CF 418 181 AX: RNCC: 3 | RNVC: 2
CF 418 181 AX: RNCC: 5 | RNVC: 2
CF418181AX: RNCC: 5 | RNVC: 2
CF 418 181 AX: RNCC: 5 | RNVC: 2
CF418181AX: RNCC: 5 | RNVC: 2
CF418181AX: RNCC: 5 | RNVC: 2

11 Oct 1978

5340-12-316-7259
Loop Clamp

123167259
42159011: RNCC: 3 | RNVC: 2

7 Feb 1989

5340-12-198-7251
Mending Plate

121987251
27 0319 165: RNCC: 2 | RNVC: 2
9849623: RNCC: 3 | RNVC: 2
27 0319 165: RNCC: 5 | RNVC: 9
9849623: RNCC: 5 | RNVC: 9
270319165: RNCC: 5 | RNVC: 9

22 Feb 1984

5340-12-346-6470
Webbing Strap

123466470
9843036: RNCC: 3 | RNVC: 2
108-331200.000: RNCC: 5 | RNVC: 9
9843036: RNCC: 5 | RNVC: 9

20 Aug 1998

5340-12-302-7559
Mending Plate

123027559
CF 325 518 D: RNCC: 3 | RNVC: 2
CF 325 518 D: RNCC: 5 | RNVC: 2

29 Jan 1985

5340-12-311-7249
Catch Strike

123117249
17L11-1-1AA: RNCC: 3 | RNVC: 2
024952: RNCC: 5 | RNVC: 2

12 Oct 1987

5340-12-326-9354
Bail Handle

123269354
ZP20137-2: RNCC: 3 | RNVC: 2

12 Nov 1991

5340-12-310-4423
Headless Straight Rod

123104423
4-172013: RNCC: 3 | RNVC: 2
471641: RNCC: 5 | RNVC: 2

22 May 1987

5340-12-392-7650
Retaining Strap

123927650
DIN72571-1-6-W5: RNCC: 2 | RNVC: 2

5 Jul 2013

5340-12-184-2292
Bow Handle

121842292
0-053-119-0: RNCC: 3 | RNVC: 2

8 Jul 1980

5340-12-306-2368
Snap Hook

123062368
9777 51 TYP GSG 9: RNCC: 3 | RNVC: 9

7 Feb 1986

5340-12-347-0284
Access Cover

123470284
54.0054.138.03: RNCC: 3 | RNVC: 2

14 Oct 1998

5340-12-306-7211
Retaining Strap

123067211
LBG212PP: RNCC: 3 | RNVC: 2
LBG212PP: RNCC: 5 | RNVC: 2

24 Mar 1986

5340-12-339-9763
Casement Fastener

123399763
62.6955.010.01-A001: RNCC: 3 | RNVC: 2

8 Feb 1996

5340-12-388-0252
Section Block Clamp

123880252
5519950368: RNCC: 3 | RNVC: 2

16 Feb 2012

5340-12-302-6616
Butt Hinge

123026616
9768/3K: RNCC: 3 | RNVC: 2

22 Jan 1985

5340-12-313-3774
Nonmetallic Bumper

123133774
9121750299: RNCC: 3 | RNVC: 2
206/01-12/2175-11-21-00: RNCC: 5 | RNVC: 9
34K/01-12/2175-11-21-00: RNCC: 5 | RNVC: 9

26 Mar 1988

5340-12-175-7914
Spring Tension Clip

121757914
8935103904: RNCC: 3 | RNVC: 2
1691643: RNCC: 5 | RNVC: 2
42484159: RNCC: 5 | RNVC: 2
42484159EY5078-28: RNCC: 5 | RNVC: 2
502985877: RNCC: 5 | RNVC: 2
1405136: RNCC: 5 | RNVC: 2

18 Oct 1978

5340-12-151-4919
Clamping Catch

121514919
23111-4256.00: RNCC: 2 | RNVC: 2
580.087: RNCC: 3 | RNVC: 2
23111-4256.00: RNCC: 3 | RNVC: 2
23111-4256-00: RNCC: 5 | RNVC: 2
23111-4256-00: RNCC: 5 | RNVC: 9
23111-4256-00: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-300-2627
Mending Plate

123002627
5801411-4125.023: RNCC: 3 | RNVC: 2
5801411-4125-023: RNCC: 5 | RNVC: 2

19 Jul 1984

5340-12-314-5951
Mending Plate

123145951
512214-3105.000: RNCC: 3 | RNVC: 2
512214-3105: RNCC: 5 | RNVC: 2

21 Jul 1988

5340-12-301-8890
Angle Bracket

123018890
20-5220-161: RNCC: 3 | RNVC: 2

15 Nov 1984

5340-12-308-2954
Angle Bracket

123082954
00584-10100-13-001: RNCC: 3 | RNVC: 2

24 Sep 1986

5340-12-366-7639
Dust And Moisture Seal Protective Plug

123667639
915042011001: RNCC: 3 | RNVC: 2
N15042-11-PA66: RNCC: 5 | RNVC: 2

6 Jun 2005

5340-12-358-1572
Rod End Clevis

123581572
L50.86.0151.34: RNCC: 2 | RNVC: 2
L50.86.0151.34: RNCC: 3 | RNVC: 2

20 Sep 2002

5340-12-393-1778
Mounting Plate

123931778
DF 415 694 AX: RNCC: 3 | RNVC: 2

15 Aug 2013

5340-12-385-5237
Angle Bracket

123855237
4000002864: RNCC: 3 | RNVC: 2

10 Jun 2011

5340-12-362-3426
Door Button

123623426
704254008: RNCC: 3 | RNVC: 2

10 Feb 2004

5340-12-177-2900
Access Cover

121772900
81301100067: RNCC: 3 | RNVC: 2

24 Jan 1979

Load More Results