What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 111 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 111 of 178

5340-12-303-2048
Nonmetallic Bumper

123032048
714-001300-907-0: RNCC: 3 | RNVC: 2
714-001300-907-0: RNCC: 5 | RNVC: 2

6 Mar 1985

5340-12-178-2249
Mounting Bracket

121782249
81517100556: RNCC: 3 | RNVC: 2
81.51710.0556: RNCC: 5 | RNVC: 2
23250-120610-002-0: RNCC: 5 | RNVC: 9
23250-120610.002.0: RNCC: 5 | RNVC: 9

9 Apr 1979

5340-12-192-9797
Retaining Strap

121929797
493-100-21: RNCC: 3 | RNVC: 2
0009350036: RNCC: 3 | RNVC: 2
493-100-21: RNCC: 5 | RNVC: 9
726 1 74 285 1: RNCC: 5 | RNVC: 9

9 Jun 1982

5340-12-354-8355
Caster Frame

123548355
5400049-117811.00: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-356-4992
Dust And Moisture Seal Protective Plug

123564992
735G3/4: RNCC: 3 | RNVC: 2
909735149: RNCC: 5 | RNVC: 2
GPN735-G3/4: RNCC: 5 | RNVC: 9

6 Mar 2002

5340-12-322-9587
Metallic Bumper

123229587
119232: RNCC: 3 | RNVC: 2

11 Oct 1990

5340-12-181-2001
Dust And Moisture Seal Protective Plug

121812001
44-24999: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-12-700-6587
Pawl Fastener

127006587
VG95211-ML-127006587: RNCC: 2 | RNVC: 2
088429560: RNCC: 3 | RNVC: 2
0502540095999: RNCC: 5 | RNVC: 2
88429560: RNCC: 5 | RNVC: 2

2 Oct 1992

5340-12-305-6628
Dust And Moisture Seal Protective Plug

123056628
GL32 SCHWARZ: RNCC: 3 | RNVC: 2
GL32 86: RNCC: 5 | RNVC: 2
GL32 86SW: RNCC: 5 | RNVC: 2
000000-0151.272: RNCC: 5 | RNVC: 2
151.272: RNCC: 5 | RNVC: 2

3 Dec 1985

5340-12-380-3781
Spring Tension Clip

123803781
5220980173: RNCC: 3 | RNVC: 2

23 Oct 2009

5340-12-377-4188
Dust And Moisture Seal Protective Cap

123774188
41273506: RNCC: 3 | RNVC: 2

15 Jan 2009

5340-12-197-2140
Retaining Strap

121972140
10.206.03.21: RNCC: 2 | RNVC: 2
10.206.03.21: RNCC: 5 | RNVC: 2

29 Sep 1983

5340-12-305-5636
Angle Bracket

123055636
502327: RNCC: 3 | RNVC: 2

22 Nov 1985

5340-12-390-6511
Section Block Clamp

123906511
7073139: RNCC: 3 | RNVC: 2

30 Nov 2012

5340-12-135-6767

5340-12-376-8751
Vent Plug

123768751
EE-M0012-14: RNCC: 3 | RNVC: 2

14 Nov 2008

5340-12-383-1741
Access Cover

123831741
SMJ 235-001-102-360: RNCC: 3 | RNVC: 2
SMJ235-001-102-360: RNCC: 5 | RNVC: 2

22 Sep 2010

5340-12-184-3880
Mounting Bracket

121843880
100000773: RNCC: 2 | RNVC: 2
100000773: RNCC: 3 | RNVC: 2
5801357-1021.00: RNCC: 5 | RNVC: 9
5801357-1021-00: RNCC: 5 | RNVC: 9
5801357-1021-00: RNCC: 5 | RNVC: 9
5801357-1021-00: RNCC: 5 | RNVC: 9

22 Jul 1980

5340-12-335-3033
Angle Bracket

123353033
6700018-201100.05: RNCC: 2 | RNVC: 2
6700018-201100.05: RNCC: 3 | RNVC: 2

8 Aug 1994

5340-12-309-7828
Hook Handle

123097828
20808-062: RNCC: 3 | RNVC: 2

27 Feb 1987

5340-12-194-1604
Mending Plate

121941604
A-296770-409: RNCC: 3 | RNVC: 2
A296770-409: RNCC: 5 | RNVC: 2

7 Oct 1982

5340-12-361-2977
Block Clamp

123612977
1110014078: RNCC: 3 | RNVC: 2
SMG210/10PA-GD-AS1.4571SO: RNCC: 5 | RNVC: 2

15 Sep 2003

5340-12-317-3570
Access Cover

123173570
0418 2498: RNCC: 3 | RNVC: 2
04182498EB0148-39: RNCC: 5 | RNVC: 2
1435799: RNCC: 5 | RNVC: 2

31 Mar 1989

5340-12-164-8485
Nonmetallic Bumper

121648485
1392152-350000.019: RNCC: 3 | RNVC: 2
279.827 253: RNCC: 5 | RNVC: 2
1392152-350000-019: RNCC: 5 | RNVC: 9
1392152-350000.019: RNCC: 5 | RNVC: 9
1392152-350000-019: RNCC: 5 | RNVC: 9
1392152-350000.019: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-316-8287
Retaining Strap

123168287
4200077-130-01: RNCC: 2 | RNVC: 2

16 Feb 1989

5340-12-335-8245
Butt Hinge

123358245
K300140-200.01: RNCC: 3 | RNVC: 2
K300140-200-01: RNCC: 5 | RNVC: 2

20 Sep 1994

5340-12-322-3482
Padlock

123223482
DIN7465-D40R-MS-ST-6031: RNCC: 2 | RNVC: 2
466RM-SK/40 MIT,SPLEISRING 19MM: RNCC: 3 | RNVC: 2
726/40-SK MIT SCHLUESSERRING19MM: RNCC: 3 | RNVC: 2
446RM-SK/40: RNCC: 5 | RNVC: 2
0008900589: RNCC: 5 | RNVC: 2
42046476: RNCC: 5 | RNVC: 2
DIN7465-D4-40-MS-ST-6014: RNCC: 5 | RNVC: 2
DIN7465-D4-40-MS-ST-6031: RNCC: 5 | RNVC: 2
DIN7465-D40R-MS-ST-6014: RNCC: 5 | RNVC: 2

14 Aug 1990

5340-12-167-6774
Clamping Catch

121676774
PAN5109-29: RNCC: 3 | RNVC: 2

12 Jan 1977

5340-12-331-5109
Angle Bracket

123315109
U100-3215-001: RNCC: 2 | RNVC: 2
U100-3215-001: RNCC: 3 | RNVC: 2
U100-3215-001: RNCC: 5 | RNVC: 2

12 May 1993

5340-12-343-0967
Mounting Bracket

123430967
5080-242: RNCC: 3 | RNVC: 2

28 Apr 1997

5340-12-366-9740
Mounting Bracket

123669740
2300421-204835.000: RNCC: 2 | RNVC: 2
2300421-204835.000: RNCC: 3 | RNVC: 2

27 Jun 2005

5340-12-313-4257
Retaining Strap

123134257
9121750293: RNCC: 3 | RNVC: 2
134/2175-12-18-00: RNCC: 5 | RNVC: 2
3100/2175-12-18-00: RNCC: 5 | RNVC: 9

30 Mar 1988

5340-12-338-7276
Nonmetallic Bumper

123387276
6700017-205510.01: RNCC: 2 | RNVC: 2
6700017-205510.01: RNCC: 3 | RNVC: 2

21 Aug 1995

5340-12-330-9337
Mounting Plate

123309337
480-7347-11-00-01: RNCC: 3 | RNVC: 2
480/7347-11-00-01: RNCC: 5 | RNVC: 2

1 Mar 1993

5340-12-315-3593
Spring Loaded Cylinder Fastener

123153593
BK S10/14: RNCC: 3 | RNVC: 2
BK S10/14: RNCC: 5 | RNVC: 9
S10/14: RNCC: 5 | RNVC: 9

15 Oct 1988

5340-12-353-4386
Spacing Threaded Standoff

123534386
DI644/10: RNCC: 3 | RNVC: 2
M4/SW8/10: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-12-143-6009
Helical Compression Spring Seat

121436009
0331 5520: RNCC: 3 | RNVC: 2
3315520KZ0185-00: RNCC: 5 | RNVC: 2
3315520: RNCC: 5 | RNVC: 9
230951B3: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-345-4704
Access Cover

123454704
610600: RNCC: 3 | RNVC: 2
90000610600: RNCC: 5 | RNVC: 2
90000610600: RNCC: 5 | RNVC: 2

20 Mar 1998

5340-12-194-0405
Detent Plunger

121940405
1238 306 032: RNCC: 3 | RNVC: 2
81.32523.0024: RNCC: 5 | RNVC: 2
81325230024: RNCC: 5 | RNVC: 2
0215996: RNCC: 5 | RNVC: 2
1238306032: RNCC: 5 | RNVC: 9
215996: RNCC: 5 | RNVC: 9

27 Sep 1982

5340-12-175-1889
Spring Tension Clip

121751889
1009940160: RNCC: 3 | RNVC: 2

30 Aug 1978

5340-12-196-3656
Friction Catch

121963656
6030223: RNCC: 3 | RNVC: 2
000000-0150.526: RNCC: 5 | RNVC: 2
150.526: RNCC: 5 | RNVC: 2
1768227: RNCC: 5 | RNVC: 2
1768227: RNCC: 5 | RNVC: 2
1768 227: RNCC: 5 | RNVC: 9

30 Jun 1983

5340-12-304-6732
Loop Clamp

123046732
0336 1609: RNCC: 3 | RNVC: 2
03361609EE0146-08: RNCC: 5 | RNVC: 2

12 Aug 1985

5340-12-322-1927
Nonmetallic Bumper

123221927
9000 1071: RNCC: 3 | RNVC: 2

31 Jul 1990

5340-12-127-8041

5340-12-184-3116
Butt Hinge

121843116
3409-40X0-8NIR0: RNCC: 3 | RNVC: 2

15 Jul 1980

5340-12-370-7977
Exit Bolt

123707977
133195: RNCC: 3 | RNVC: 2

21 Dec 2006

5340-12-315-2697
Mending Plate

123152697
54.0026.048.00: RNCC: 3 | RNVC: 2

7 Oct 1988

5340-12-331-2407
Key Blank

123312407
257K: RNCC: 3 | RNVC: 2

6 Apr 1993

5340-12-303-9471
Folding Stay

123039471
3228300344: RNCC: 3 | RNVC: 2

23 May 1985

5340-12-317-2524
Mounting Plate

123172524
CF 446 752: RNCC: 3 | RNVC: 2
CF 446 752: RNCC: 5 | RNVC: 2

21 Mar 1989

5340-12-358-9375
Webbing Strap

123589375
96A23826A10: RNCC: 3 | RNVC: 2

2 Dec 2002

5340-12-364-2490
Cushioning Pad

123642490
4367930196: RNCC: 3 | RNVC: 2

3 Sep 2004

5340-12-359-4916
Rod End Clevis

123594916
BD5.100.134.520: RNCC: 3 | RNVC: 2

11 Feb 2003

5340-12-340-1620
Double Angle Bracket

123401620
87-401.35-03.00-23: RNCC: 3 | RNVC: 2
87-401.35-03.00-23/4: RNCC: 5 | RNVC: 2

8 Mar 1996

5340-12-390-7912
Webbing Strap

123907912
6.667-307.0: RNCC: 3 | RNVC: 2

12 Dec 2012

5340-12-366-7647
Mounting Plate

123667647
2300421-204800.003: RNCC: 2 | RNVC: 2
2300421-204800.003: RNCC: 3 | RNVC: 2

6 Jun 2005

5340-12-702-7096
Access Cover

127027096
25-08301120824: RNCC: 2 | RNVC: 2

5 Dec 1995

5340-12-352-6111
Door Handle

123526111
8120-0021: RNCC: 2 | RNVC: 2
8120-0021: RNCC: 3 | RNVC: 2

30 Nov 2000

5340-12-701-6396
Mounting Bracket

127016396
VG95211-ML-127016396: RNCC: 2 | RNVC: 2
5.12.7080.1280.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-332-1285
Butt Hinge Leaf

123321285
1H0823301: RNCC: 3 | RNVC: 9

21 Jul 1993

5340-12-028-2661

5340-12-182-3752
Pipe Bracket

121823752
1810180040: RNCC: 3 | RNVC: 2

28 Jan 1980

5340-12-375-6421
Dust And Moisture Seal Protective Cap-Plug

123756421
1244010009: RNCC: 3 | RNVC: 2

19 Jun 2008

5340-12-369-2333
Mounting Bracket

123692333
05150500: RNCC: 3 | RNVC: 2

7 Jun 2006

5340-12-351-4859
Lever Bracket

123514859
T671M1001207: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-12-354-7695
Angle Bracket

123547695
X020.053Z0812: RNCC: 3 | RNVC: 2

23 Aug 2001

5340-12-309-1899
Flush Lock

123091899
4607200935: RNCC: 3 | RNVC: 2

19 Dec 1986

5340-12-197-4480
Headless Straight Rod

121974480
3601810305: RNCC: 3 | RNVC: 2

24 Oct 1983

5340-12-010-0898

5340-12-010-0822

5340-12-010-0895

5340-12-363-6514
Rod End Clevis

123636514
704-110200-901-0: RNCC: 3 | RNVC: 2

10 Jul 2004

5340-12-379-6299
Mounting Bracket

123796299
12.7330-20-01-40.00-00: RNCC: 3 | RNVC: 2
858296: RNCC: 5 | RNVC: 2

18 Aug 2009

5340-12-300-0283
Dust And Moisture Seal Protective Plug

123000283
300V26 PE-HART: RNCC: 3 | RNVC: 2
GPN300V26-PE-HART: RNCC: 5 | RNVC: 2
301002600-PE-HART: RNCC: 5 | RNVC: 9
301002602: RNCC: 5 | RNVC: 9
GPN300,V26,PE-HART: RNCC: 5 | RNVC: 9
V26-PE-HART: RNCC: 5 | RNVC: 9
V26GPN300-PE-HART: RNCC: 5 | RNVC: 9

27 Jun 1984

5340-12-182-9752
Loop Clamp

121829752
23223-220000.24.0: RNCC: 2 | RNVC: 2
23223-220000.24.0: RNCC: 3 | RNVC: 2
23223-220000-24-0: RNCC: 3 | RNVC: 2
1221106: RNCC: 5 | RNVC: 2
23223-220000-24-0: RNCC: 5 | RNVC: 9
23223-220000.24.0: RNCC: 5 | RNVC: 9

11 Mar 1980

5340-12-334-9328
Rod End Clevis

123349328
11.49051-0200: RNCC: 3 | RNVC: 2
11.49051-0200: RNCC: 5 | RNVC: 2
B11.49028-0426TEIL10: RNCC: 5 | RNVC: 2
11 49051 0200: RNCC: 5 | RNVC: 2

4 Jul 1994

5340-12-332-0761
Resilient Mount

123320761
VG95365-C2-CR-ST: RNCC: 3 | RNVC: 2
E1N 101-02: RNCC: 3 | RNVC: 2
60165002: RNCC: 5 | RNVC: 2
480-4922-11-00-00-23: RNCC: 5 | RNVC: 2
480/4922-11-00-00/23: RNCC: 5 | RNVC: 2
VG95365-C2-CR-ST: RNCC: 5 | RNVC: 9

21 Jul 1993

5340-12-134-6401
Escutcheon Plate

121346401
4730005: RNCC: 3 | RNVC: 2
4198742: RNCC: 5 | RNVC: 2
50.80-012: RNCC: 5 | RNVC: 2
5080-012: RNCC: 5 | RNVC: 2
268398: RNCC: 5 | RNVC: 2
39354: RNCC: 5 | RNVC: 2
2512-37-40: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-322-5970
Headless Straight Rod

123225970
1281523: RNCC: 3 | RNVC: 2
0906.105.12.00/220: RNCC: 5 | RNVC: 2
1281523: RNCC: 5 | RNVC: 2
1568778: RNCC: 5 | RNVC: 9

5 Sep 1990

5340-12-173-0805
Electrical-Mechanical Equipment Post

121730805
5800573-1112-022: RNCC: 3 | RNVC: 2
5800573-1112.022: RNCC: 5 | RNVC: 2
C42326-A20-C142: RNCC: 5 | RNVC: 2
C42326A20C142: RNCC: 5 | RNVC: 2

20 Mar 1978

5340-12-145-4341
Resilient Mount

121454341
DIN95363-A28X12-M6X10-M6X15NR70: RNCC: 2 | RNVC: 2
81100-28X12-M6X10-M6X15.NR70.ST: RNCC: 5 | RNVC: 2
AH2-20-240: RNCC: 5 | RNVC: 9
AH2-20-27N: RNCC: 5 | RNVC: 9
AH2.20/27N: RNCC: 5 | RNVC: 9
VG95363-A28X12-M6X10-M6X15NR70ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-191-9632
Resilient Mount

121919632
E1FH 2727-01: RNCC: 3 | RNVC: 2
5692607: RNCC: 3 | RNVC: 2
569.2607: RNCC: 5 | RNVC: 2
E1FH2727-01: RNCC: 5 | RNVC: 2

17 Mar 1982

5340-12-317-4576
Metal Runner

123174576
1201000301: RNCC: 3 | RNVC: 2
4127-01-00-20: RNCC: 5 | RNVC: 2

11 Apr 1989

5340-12-315-6634
Mending Plate

123156634
590610-4505.000: RNCC: 3 | RNVC: 2
590610-4505: RNCC: 5 | RNVC: 2

18 Nov 1988

5340-12-010-8484

5340-12-173-8527
Section Block Clamp

121738527
PAN4274-8: RNCC: 3 | RNVC: 2

17 May 1978

5340-12-356-4986
Dust And Moisture Seal Protective Plug

123564986
735M18X1,5: RNCC: 3 | RNVC: 2
909735143: RNCC: 5 | RNVC: 2
GPN735-M18X1,5: RNCC: 5 | RNVC: 9

6 Mar 2002

5340-12-357-5422
Loop Clamp

123575422
5559894: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-12-352-8653
Angle Bracket

123528653
4376610014: RNCC: 3 | RNVC: 2
437 661 00 14: RNCC: 5 | RNVC: 2

21 Dec 2000

5340-12-391-2550
Webbing Strap

123912550
1410000230: RNCC: 3 | RNVC: 2

28 Feb 2013

5340-12-359-7970
Mounting Bracket

123597970
2500261-820000.007.0: RNCC: 2 | RNVC: 2
2500261-820000.007.0: RNCC: 3 | RNVC: 2

11 Mar 2003

5340-12-388-2565
Access Cover

123882565
10127-183600.001.0: RNCC: 3 | RNVC: 2

6 Mar 2012

5340-12-393-7709
Webbing Strap

123937709
8605004.3.020.04: RNCC: 3 | RNVC: 2

9 Oct 2013

5340-12-179-6943
Angle Bracket

121796943
CF 207 249 A: RNCC: 2 | RNVC: 2
CF 207 249 A: RNCC: 3 | RNVC: 2
CF 207 249 A: RNCC: 5 | RNVC: 2
CF 207 249 A: RNCC: 5 | RNVC: 2
CF207249A: RNCC: 5 | RNVC: 9
CF207249A: RNCC: 5 | RNVC: 9
CF207249A: RNCC: 5 | RNVC: 9

20 Jul 1979

5340-12-308-3477
Retaining Strap

123083477
3.418.9.977.005.4: RNCC: 3 | RNVC: 2
3.418.9.977.005.4: RNCC: 5 | RNVC: 9

1 Oct 1986

5340-12-379-4378
Handle Grip

123794378
00.050.503.1: RNCC: 3 | RNVC: 2

22 Jul 2009

5340-12-317-8025
Access Cover

123178025
P-616847-001: RNCC: 3 | RNVC: 2
P616847-001: RNCC: 5 | RNVC: 2

16 May 1989

5340-12-307-9211
Retaining Strap

123079211
DIN1592-36ZN: RNCC: 2 | RNVC: 2
DIN1592-36ZN: RNCC: 3 | RNVC: 2
DIN1592-36ZN: RNCC: 3 | RNVC: 2
DIN1592-36ZN: RNCC: 5 | RNVC: 2
DIN1592-36ZN: RNCC: 5 | RNVC: 2
DIN1592-36: RNCC: 5 | RNVC: 9
DIN1592-36BK: RNCC: 5 | RNVC: 9
36DIN1592: RNCC: 5 | RNVC: 9
DIN1592-36: RNCC: 5 | RNVC: 9
DIN1592-36BK: RNCC: 5 | RNVC: 9

11 Aug 1986

5340-12-193-8774
Mending Plate

121938774
160-204605.109: RNCC: 3 | RNVC: 2
160-204605-109: RNCC: 5 | RNVC: 2
160-204605.109: RNCC: 5 | RNVC: 9

8 Sep 1982

5340-12-193-8504
Bridge Clamp

121938504
23111-1901.07: RNCC: 3 | RNVC: 2
23111-1901-07: RNCC: 5 | RNVC: 9
23111-1901.07: RNCC: 5 | RNVC: 9
23111-1901-07: RNCC: 5 | RNVC: 9
23111-1901.07: RNCC: 5 | RNVC: 9

7 Sep 1982

5340-12-184-3543
Electrical-Mechanical Equipment Post

121843543
1700013-10400.00: RNCC: 2 | RNVC: 2
297061: RNCC: 3 | RNVC: 2
1700013-10400-00: RNCC: 5 | RNVC: 9
1700013-10400.00: RNCC: 5 | RNVC: 9

19 Jul 1980

5340-12-134-6392
Escutcheon Plate

121346392
2512-36-28: RNCC: 3 | RNVC: 2
2512-36-28: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-196-0805
Butt Hinge

121960805
03454235: RNCC: 3 | RNVC: 2
5758-18-08.10: RNCC: 5 | RNVC: 2
D5758-18-08.10: RNCC: 5 | RNVC: 2

25 May 1983

5340-12-381-9751
Hand Crank

123819751
15488-08-3: RNCC: 3 | RNVC: 2

22 Apr 2010

5340-12-701-6260
Angle Bracket

127016260
VG95211-ML-127016260: RNCC: 2 | RNVC: 2
5.12.7040.1270.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-351-4682
Angle Bracket

123514682
2500238-042500.003.0: RNCC: 2 | RNVC: 2
2500238-042500.003.0: RNCC: 3 | RNVC: 2

29 Jul 2000

5340-12-304-8059
Handwheel

123048059
VG85082-C-125X11-RG: RNCC: 2 | RNVC: 2
VG85082-C-125X11-RG: RNCC: 3 | RNVC: 2
VG85082-C-125X11-RG: RNCC: 3 | RNVC: 2
VG85082-C-125X11-RG: RNCC: 3 | RNVC: 9
C125X11VG85083-RG5: RNCC: 5 | RNVC: 9

26 Aug 1985

5340-12-384-0790
Loop Clamp

123840790
1873-089001.000.0: RNCC: 2 | RNVC: 2
1873-089001.000.0: RNCC: 3 | RNVC: 2

19 Jan 2011

5340-12-317-9603
Butt Hinge Leaf

123179603
704-125123-000-0: RNCC: 3 | RNVC: 2

30 May 1989

5340-12-701-7121
Retaining Band

127017121
VG95211-ML-127017121: RNCC: 2 | RNVC: 2
5.12.7601.3130.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-161-1202
Rod End Clevis

121611202
160-62161-22: RNCC: 3 | RNVC: 2
160-62161-22: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-327-3083
Mending Plate

123273083
2106-110000.06B: RNCC: 2 | RNVC: 2
2106-110000.06B: RNCC: 3 | RNVC: 2

9 Jan 1992

5340-12-701-8449
Loop Clamp

127018449
VG95211-ML-127018449: RNCC: 2 | RNVC: 2
5149A-52: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-313-6315
Angle Bracket

123136315
NO PRIMARY REF 12-313-6315: RNCC: 3 | RNVC: 2
5511 179073: RNCC: 5 | RNVC: 9

21 Apr 1988

5340-12-171-1880
Retaining Strap

121711880
06671500102: RNCC: 3 | RNVC: 2
06.67150-0102: RNCC: 5 | RNVC: 2
8MAN217: RNCC: 5 | RNVC: 2

16 Sep 1977

5340-12-337-9862
Access Cover

123379862
230-133.31: RNCC: 3 | RNVC: 2
230.133.31: RNCC: 5 | RNVC: 2
PK-TT-38: RNCC: 5 | RNVC: 2

9 May 1995

5340-12-317-5730
Mounting Bracket

123175730
4900064-41233.002: RNCC: 3 | RNVC: 2

19 Apr 1989

5340-12-387-9095
Mounting Bracket

123879095
R900816026: RNCC: 3 | RNVC: 2

8 Feb 2012

5340-12-372-4992
Door Handle Unit

123724992
10060036: RNCC: 3 | RNVC: 2

23 Jul 2007

5340-12-391-8117
Loop Clamp

123918117
0004321421: RNCC: 3 | RNVC: 2

10 Apr 2013

5340-12-357-5410
Dust And Moisture Seal Protective Cover

123575410
5582711: RNCC: 2 | RNVC: 2
5582711: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-12-183-9618
Mending Plate

121839618
333004-0105.000: RNCC: 2 | RNVC: 2
333004-0105.000: RNCC: 3 | RNVC: 2
1255-11000.005: RNCC: 5 | RNVC: 2
1255-02-4: RNCC: 5 | RNVC: 9
1255-11000-005: RNCC: 5 | RNVC: 9
1255-11000.005: RNCC: 5 | RNVC: 9
333004-0105.000: RNCC: 5 | RNVC: 9
1255-02.4: RNCC: 5 | RNVC: 9
1255-11000-005: RNCC: 5 | RNVC: 9
1255-11000.005: RNCC: 5 | RNVC: 9

7 Jun 1980

5340-12-318-3233
Multiple Angle Bracket

123183233
6100126-3120: RNCC: 2 | RNVC: 2
8791322198: RNCC: 3 | RNVC: 2
8791322198: RNCC: 5 | RNVC: 9

30 Jun 1989

5340-12-316-7433
Butt Hinge Leaf

123167433
5803482-221040.00: RNCC: 3 | RNVC: 2
5803482-221040.00: RNCC: 5 | RNVC: 9

8 Feb 1989

5340-12-354-8097
Retaining Strap

123548097
DIN1592-39ZN: RNCC: 2 | RNVC: 2
DIN1592-39ZN: RNCC: 3 | RNVC: 2
DIN1592-39ZN: RNCC: 3 | RNVC: 2

28 Aug 2001

5340-12-326-6123
Webbing Strap

123266123
2500035-105220.00: RNCC: 2 | RNVC: 2
2500035-105220.00: RNCC: 3 | RNVC: 2
000-D6-25X2,5X190-PE-RAL6031: RNCC: 6 | RNVC: 9

15 Oct 1991

5340-12-350-3833
Access Cover

123503833
J52424540-401: RNCC: 3 | RNVC: 2

23 Mar 2000

5340-12-702-5999
Loop Clamp

127025999
VG95211-ML-127025999: RNCC: 2 | RNVC: 2
5152A-18: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-353-1799
Retaining Strap

123531799
103-220-026: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-12-195-3761
Butt Hinge Leaf

121953761
PAN2224-25: RNCC: 3 | RNVC: 2

17 Feb 1983

5340-12-360-1409
Dust And Moisture Seal Protective Cap

123601409
1000/8267: RNCC: 3 | RNVC: 2
GPN1000/8267: RNCC: 5 | RNVC: 2

10 Apr 2003

5340-12-318-7985
Angle Bracket

123187985
4354910541: RNCC: 3 | RNVC: 2

17 Aug 1989

5340-12-303-5605
Resilient Mount

123035605
742256S4BL2: RNCC: 3 | RNVC: 2
57422560412: RNCC: 5 | RNVC: 2
3012400818: RNCC: 5 | RNVC: 2

4 Apr 1985

5340-12-320-3028
Electrical-Mechanical Equipment Post

123203028
0241 9005: RNCC: 3 | RNVC: 2
02419005EE0148-44: RNCC: 5 | RNVC: 2

29 Dec 1989

5340-12-340-7845
Protection Bellows

123407845
200.1127: RNCC: 3 | RNVC: 2

12 Jun 1996

5340-12-193-8575
Lock-Release Lever

121938575
3740047951: RNCC: 3 | RNVC: 2
8690940110: RNCC: 5 | RNVC: 2

7 Sep 1982

5340-12-176-4915
Butt Hinge Leaf

121764915
WW 306 049 BR: RNCC: 2 | RNVC: 2
WW 306 049 BR: RNCC: 3 | RNVC: 9
WW 306 049 AR: RNCC: 5 | RNVC: 2
WW 306 049 BR: RNCC: 5 | RNVC: 2
WW306049AR: RNCC: 5 | RNVC: 2
WW 306 049 AR: RNCC: 5 | RNVC: 9
WW306049AR: RNCC: 5 | RNVC: 9

30 Nov 1978

5340-12-134-7319
Nut And Bolt Retainer

121347319
136B27006: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-300-3118
Butt Hinge

123003118
3097402637: RNCC: 3 | RNVC: 2

24 Jul 1984

5340-12-027-9609

5340-12-170-6647
Retaining Strap

121706647
614-10-000000006: RNCC: 3 | RNVC: 2

25 Jul 1977

5340-12-306-1554
Nonmetallic Bumper

123061554
47021-001: RNCC: 3 | RNVC: 2
47 021-001: RNCC: 5 | RNVC: 9

31 Jan 1986

5340-12-332-9450
Mending Plate

123329450
706-184400-902-0: RNCC: 3 | RNVC: 2

8 Oct 1993

5340-12-186-9944
Manual Control Handle

121869944
5203445: RNCC: 3 | RNVC: 2

25 Feb 1981

5340-12-326-4839
Access Cover

123264839
3968270043: RNCC: 3 | RNVC: 2

23 Sep 1991

5340-12-091-8675

5340-12-338-4262
Access Door

123384262
6521112: RNCC: 2 | RNVC: 2
6521112: RNCC: 3 | RNVC: 2
6521112: RNCC: 5 | RNVC: 9

7 Jul 1995

5340-12-339-3043
Access Cover

123393043
3963344: RNCC: 3 | RNVC: 2

7 Nov 1995

5340-12-323-0941
Access Cover

123230941
14.50.1408-4: RNCC: 3 | RNVC: 2

23 Oct 1990

5340-12-701-2556
Mounting Bracket

127012556
VG95211-ML-127012556: RNCC: 2 | RNVC: 2
5.12.4003.0030.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-149-8091
Swivel Caster

121498091
BUND-ROERO 5340-12-149-8091: RNCC: 3 | RNVC: 2
1121/1: RNCC: 5 | RNVC: 2
3208: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-350-0884
Mounting Bracket

123500884
2300348-060083.000.0: RNCC: 3 | RNVC: 2
1591271: RNCC: 5 | RNVC: 2

14 Feb 2000

5340-12-701-6876
Angle Bracket

127016876
VG95211-ML-127016876: RNCC: 2 | RNVC: 2
5.12.7220.2240.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-333-3532
Nonmetallic Bumper

123333532
702-442230-901-0: RNCC: 3 | RNVC: 2

6 Dec 1993

5340-12-319-2129
Nonmetallic Solid Wheel

123192129
9126.008.4: RNCC: 3 | RNVC: 2

14 Sep 1989

5340-12-700-6561
Retaining Strap

127006561
VG95211-ML-127006561: RNCC: 2 | RNVC: 2
5.12.5850.4260.00: RNCC: 3 | RNVC: 2
0501401030779: RNCC: 5 | RNVC: 2

2 Oct 1992

5340-12-391-9127
Mounting Bracket

123919127
2500261-180300.003.0: RNCC: 2 | RNVC: 2
2500261-180300.003.0: RNCC: 3 | RNVC: 2

18 Apr 2013

5340-12-023-2949

5340-12-319-8974
Nonmetallic Bumper

123198974
503500: RNCC: 3 | RNVC: 2

15 Nov 1989

5340-12-159-8631
Expansion Plug

121598631
100332-16000.60: RNCC: 2 | RNVC: 2
100332-16000.60: RNCC: 5 | RNVC: 2
100332-16000-60: RNCC: 5 | RNVC: 2
100332-16000-60: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-353-4166
Nut And Bolt Locking Plate

123534166
G24300-N5400-C237: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-12-315-5275
Mounting Bracket

123155275
512214-3429.000: RNCC: 3 | RNVC: 2
512214-3429: RNCC: 5 | RNVC: 2
512214-3429.000: RNCC: 5 | RNVC: 9

3 Nov 1988

5340-12-168-5707
Angle Bracket

121685707
1000025-424000-02: RNCC: 3 | RNVC: 2
1000025-424000.02: RNCC: 3 | RNVC: 2
1000025-424000.02: RNCC: 5 | RNVC: 9
1000025-424000-02: RNCC: 5 | RNVC: 9

23 Mar 1977

5340-12-325-1615
Nonmetallic Bumper

123251615
63683-001: RNCC: 3 | RNVC: 2
63 683-001: RNCC: 5 | RNVC: 2

10 May 1991

5340-12-390-7864
Mechanical Stop

123907864
F1.4553-30-01-00.00-04: RNCC: 3 | RNVC: 2

12 Dec 2012

5340-12-189-0846
Access Cover

121890846
009-078.910-003: RNCC: 3 | RNVC: 2
009-078-910-003: RNCC: 5 | RNVC: 2
009-078-910-003: RNCC: 5 | RNVC: 9
009-078.910-003: RNCC: 5 | RNVC: 9

26 Aug 1981

5340-12-169-2152
Butt Hinge Leaf

121692152
681-21210-03: RNCC: 3 | RNVC: 2
681-21210-03: RNCC: 5 | RNVC: 9

22 Apr 1977

5340-12-350-2873
Dust And Moisture Seal Protective Plug

123502873
837 258 44: RNCC: 3 | RNVC: 2

13 Mar 2000

5340-12-375-4638
Mounting Bracket

123754638
1521437: RNCC: 3 | RNVC: 2

4 Jun 2008

5340-12-386-8366
Spring Tension Clip

123868366
05718137: RNCC: 3 | RNVC: 2
04215191: RNCC: 5 | RNVC: 2
CV191709: RNCC: 5 | RNVC: 2
05718137: RNCC: 5 | RNVC: 2

6 Oct 2011

5340-12-180-6064
Mounting Bracket

121806064
4257500214: RNCC: 3 | RNVC: 2

21 Sep 1979

5340-12-178-7874
Angle Bracket

121787874
81974850261: RNCC: 3 | RNVC: 2

16 May 1979

5340-12-362-8515
Access Cover

123628515
51-51583: RNCC: 3 | RNVC: 2

6 Apr 2004

5340-12-364-2460
Angle Bracket

123642460
4375012920: RNCC: 3 | RNVC: 2

3 Sep 2004

5340-12-185-1287
Halter

121851287
4010090035: RNCC: 3 | RNVC: 2

13 Sep 1980

5340-12-369-5539
Dust And Moisture Seal Protective Plug

123695539
MH0850: RNCC: 3 | RNVC: 2
15012323: RNCC: 5 | RNVC: 2

24 Jul 2006

5340-12-189-0430
Dust And Moisture Seal Protective Cap

121890430
158007: RNCC: 2 | RNVC: 2
158007: RNCC: 3 | RNVC: 2
158 007: RNCC: 5 | RNVC: 2
158 007: RNCC: 5 | RNVC: 9
158007: RNCC: 5 | RNVC: 9

20 Aug 1981

5340-12-356-1492
Webbing Strap

123561492
4617900679: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-12-309-1241
Metallic Solid Wheel

123091241
1700024-102400.01: RNCC: 2 | RNVC: 2
1700024-102400.01: RNCC: 3 | RNVC: 2
1700024-102400-01: RNCC: 5 | RNVC: 9
1700024-102400.01: RNCC: 5 | RNVC: 9

16 Dec 1986

5340-12-189-5452
Nonmetallic Bumper

121895452
P-895176-003: RNCC: 3 | RNVC: 2
P895176-003: RNCC: 5 | RNVC: 2

5 Oct 1981

5340-12-300-9894
Mending Plate

123009894
P-855098-001: RNCC: 3 | RNVC: 2
P855098-001: RNCC: 5 | RNVC: 2

15 Sep 1984

5340-12-702-5704
Mounting Plate

127025704
VG95211-ML-127025704: RNCC: 2 | RNVC: 2
5.51.7701.1510.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-307-3998
Plug Button

123073998
33-1876-100000.23.0: RNCC: 3 | RNVC: 9

12 Jun 1986

5340-12-310-6837
Line Supporting Strap

123106837
VFN18014-1-1: RNCC: 3 | RNVC: 2
VFN18014.1-1: RNCC: 3 | RNVC: 2
VFN180141-1: RNCC: 3 | RNVC: 2
VFN18014.1-1-1.4544.9: RNCC: 5 | RNVC: 2

19 Jun 1987

5340-12-301-1626
Double Angle Bracket

123011626
A-244820-007: RNCC: 3 | RNVC: 2
A244820-007: RNCC: 5 | RNVC: 2

25 Sep 1984

5340-12-302-0249
Double Angle Bracket

123020249
P-855977-410: RNCC: 3 | RNVC: 2
P855977-410: RNCC: 5 | RNVC: 2

28 Nov 1984

5340-12-700-8609
Rod End Clevis

127008609
VG95211-ML-127008609: RNCC: 2 | RNVC: 2
155N1238-9: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-332-4110
Mending Plate

123324110
0851 7753.042: RNCC: 3 | RNVC: 2
0851 7564.012: RNCC: 5 | RNVC: 2
8517564FA T.12: RNCC: 5 | RNVC: 9
8517753FA T.42: RNCC: 5 | RNVC: 9

9 Aug 1993

5340-12-328-9577
Spring Tension Clip

123289577
2300232-972000.005.0: RNCC: 2 | RNVC: 2
2300232-972000.005.0: RNCC: 3 | RNVC: 2

3 Jul 1992

5340-12-186-2139
Angle Bracket

121862139
CF463616A: RNCC: 3 | RNVC: 2
CF 463 616 A: RNCC: 5 | RNVC: 2
CF463616A: RNCC: 5 | RNVC: 2
CF 463 616 A: RNCC: 5 | RNVC: 2

6 Dec 1980

5340-12-309-2830
Angle Bracket

123092830
4044910640: RNCC: 3 | RNVC: 2

9 Jan 1987

5340-12-359-7319
Mounting Bracket

123597319
S281M2047101: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-12-307-8198
Access Cover

123078198
ZG8106G051: RNCC: 2 | RNVC: 2
ZG8106G051: RNCC: 3 | RNVC: 2
ZG8106G051: RNCC: 5 | RNVC: 9

29 Jul 1986

5340-12-317-1812
Double Angle Bracket

123171812
4606470714: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-12-388-4496
Mounting Plate

123884496
5842035240: RNCC: 3 | RNVC: 2

22 Mar 2012

5340-12-197-2063
Resilient Mount

121972063
4258200096: RNCC: 3 | RNVC: 2

29 Sep 1983

5340-12-327-5743
Angle Bracket

123275743
4900223-202120.02: RNCC: 2 | RNVC: 2
4900223-202120.02: RNCC: 5 | RNVC: 9
4900223-202120.02: RNCC: 5 | RNVC: 9

4 Feb 1992

5340-12-360-4777
Mounting Plate

123604777
82200109: RNCC: 3 | RNVC: 2
82200109: RNCC: 5 | RNVC: 2

23 May 2003

5340-12-360-4113
Mounting Bracket

123604113
3511102306: RNCC: 3 | RNVC: 2
3511102306: RNCC: 5 | RNVC: 2

19 May 2003

5340-12-387-6329
Mounting Bracket

123876329
5803746-203385.00: RNCC: 2 | RNVC: 2
7802903385: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-12-196-6669
Angle Bracket

121966669
52.2031.550.03: RNCC: 3 | RNVC: 2

1 Aug 1983

5340-12-365-1558
Dust And Moisture Seal Protective Cap

123651558
SK16S: RNCC: 3 | RNVC: 2

2 Dec 2004

5340-12-300-6701
Double Angle Bracket

123006701
4353120560: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-094-9761

5340-12-357-7766
Angle Bracket

123577766
J29120266-001: RNCC: 3 | RNVC: 2
008008427: RNCC: 5 | RNVC: 2

23 Jul 2002

5340-12-164-4873
Nonmetallic Bumper

121644873
31-058-039-007: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-702-5998
Loop Clamp

127025998
VG95211-ML-127025998: RNCC: 2 | RNVC: 2
5152A-16: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-342-4496
Webbing Strap

123424496
A 1309-5000: RNCC: 3 | RNVC: 2

13 Feb 1997

5340-12-310-4269
Access Cover

123104269
6100108-1900.02: RNCC: 2 | RNVC: 2
6100108-1900.02: RNCC: 3 | RNVC: 2

21 May 1987

5340-12-307-3346
Catch Strike

123073346
2300041-180121.20: RNCC: 2 | RNVC: 2
790-51.20.123-02: RNCC: 3 | RNVC: 2
2300041-180121.20: RNCC: 5 | RNVC: 9

5 Jun 1986

5340-12-314-9398
Retaining Strap

123149398
C39166-A34-C50: RNCC: 3 | RNVC: 2

30 Aug 1988

5340-12-131-3380
Ball Socket Seat

121313380
DIN71805-A10PHRE: RNCC: 2 | RNVC: 2
DIN71805-A10-PHRE: RNCC: 3 | RNVC: 2
A10DIN71805PHRE: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-344-0172
Mounting Bracket

123440172
2996.10.61: RNCC: 3 | RNVC: 2
2996.1061: RNCC: 5 | RNVC: 2

29 Aug 1997

5340-12-392-4227
Helical Compression Spring Retainer

123924227
E221616: RNCC: 3 | RNVC: 2

6 Jun 2013

5340-12-310-0513
Helical Compression Spring Seat

123100513
2420222004: RNCC: 3 | RNVC: 2

1 Apr 1987

5340-12-332-6286
Access Cover

123326286
81429020161: RNCC: 2 | RNVC: 2
81429020161: RNCC: 3 | RNVC: 2
81.42902.0161: RNCC: 5 | RNVC: 2

31 Aug 1993

5340-12-330-0249
Angle Bracket

123300249
8531028.008: RNCC: 3 | RNVC: 2
0853 1028.008: RNCC: 5 | RNVC: 2

23 Oct 1992

5340-12-302-7038
Mending Plate

123027038
178.E18.80: RNCC: 3 | RNVC: 2

24 Jan 1985

5340-12-169-9321

5340-12-700-1917
Double Angle Bracket

127001917
51-260363064: RNCC: 2 | RNVC: 2
765-14-SB131: RNCC: 3 | RNVC: 2

4 Nov 1991

5340-12-197-8001
Resilient Mount

121978001
2K2-BAM-90-M10: RNCC: 3 | RNVC: 2
B462K2BAM90M10: RNCC: 5 | RNVC: 2
B462K2BAM90M10: RNCC: 5 | RNVC: 9
2K2-BAM-90-M10: RNCC: 5 | RNVC: 9
2K2BAM90M10: RNCC: 5 | RNVC: 9

23 Nov 1983

5340-12-337-5782
Butt Hinge

123375782
4900369-201145.00: RNCC: 2 | RNVC: 2
0106.21450.070: RNCC: 3 | RNVC: 2

15 Mar 1995

5340-12-330-9184
Mounting Bracket

123309184
706-650071-000-0: RNCC: 2 | RNVC: 2
706-650071-000-0: RNCC: 3 | RNVC: 2

25 Feb 1993

5340-12-164-8929
Loop Clamp

121648929
F11TAN15802-1-4544-9: RNCC: 3 | RNVC: 2
F11TAN15802N: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-307-3356
Nut And Bolt Locking Plate

123073356
1 113 740 001: RNCC: 3 | RNVC: 2
177-0776: RNCC: 5 | RNVC: 2
177-0776: RNCC: 5 | RNVC: 9

5 Jun 1986

5340-12-330-1215
Dust And Moisture Seal Protective Plug

123301215
300F31-RAL9005: RNCC: 3 | RNVC: 2
GPN300F31-RAL9005: RNCC: 5 | RNVC: 2
GPN300-F31-RAL9005: RNCC: 5 | RNVC: 9

5 Nov 1992

5340-12-192-6081
Nonmetallic Bumper

121926081
5835-211.002: RNCC: 3 | RNVC: 2
5835-211-002: RNCC: 5 | RNVC: 2

10 May 1982

5340-12-353-6864
Dust And Moisture Seal Protective Cap

123536864
J92222353-001: RNCC: 3 | RNVC: 2

26 Apr 2001

5340-12-361-6235
Loop Clamp

123616235
DIN3015-LD-0R-12-PA-W1: RNCC: 2 | RNVC: 2

27 Oct 2003

5340-12-323-8219
Mending Plate

123238219
2907275M1: RNCC: 3 | RNVC: 2
395 954 152: RNCC: 5 | RNVC: 2

20 Dec 1990

5340-12-318-6563
Retaining Strap

123186563
2200201: RNCC: 3 | RNVC: 9

3 Aug 1989

5340-12-020-7458

5340-12-349-0716
Mounting Bracket

123490716
2300387-700845.000: RNCC: 2 | RNVC: 2
9911482: RNCC: 3 | RNVC: 2
2300387-700845.000: RNCC: 5 | RNVC: 9
9911482: RNCC: 5 | RNVC: 9

21 Sep 1999

5340-12-162-2268
Loop Clamp

121622268
2216728701: RNCC: 3 | RNVC: 2
22167 28701: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-332-9902
Dust And Moisture Seal Protective Plug

123329902
3660100019: RNCC: 3 | RNVC: 2
366 010 00 19: RNCC: 5 | RNVC: 2

19 Oct 1993

5340-12-311-5145
Access Cover

123115145
5846416: RNCC: 3 | RNVC: 2
584.6416: RNCC: 5 | RNVC: 2

11 Sep 1987

5340-12-338-3235
Access Door

123383235
104-190000-902-0: RNCC: 2 | RNVC: 2
104-190000-902-0: RNCC: 3 | RNVC: 2

23 Jun 1995

5340-12-322-4456
Loop Clamp

123224456
4.091: RNCC: 3 | RNVC: 2
K12U: RNCC: 5 | RNVC: 2

22 Aug 1990

5340-12-322-3252
Nonmetallic Solid Wheel

123223252
23335-30000-2: RNCC: 3 | RNVC: 2

10 Aug 1990

5340-12-329-1317
Angle Bracket

123291317
2300264-060000.07.0: RNCC: 3 | RNVC: 2

21 Jul 1992

5340-12-701-4799
Retaining Band

127014799
VG95211-ML-127014799: RNCC: 2 | RNVC: 2
5.12.5811.1460.13: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-387-4003
Loop Clamp

123874003
DIN3016-1-D2-15-15X20-W1-2-NBR: RNCC: 2 | RNVC: 2

9 Dec 2011

5340-12-344-6570
Resilient Mount

123446570
B 75 156 01: RNCC: 3 | RNVC: 9
B7515601: RNCC: 5 | RNVC: 9

24 Nov 1997

5340-12-337-2270
Mounting Plate

123372270
5801218-2: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-194-3692
Webbing Strap

121943692
846.4605805082: RNCC: 3 | RNVC: 2
4605805082: RNCC: 3 | RNVC: 2
713 1 75 217 0: RNCC: 5 | RNVC: 9

27 Oct 1982

5340-12-335-4655
Butt Hinge

123354655
4.0284: RNCC: 3 | RNVC: 2

19 Aug 1994

5340-12-326-2083
Double Angle Bracket

123262083
3964660840: RNCC: 3 | RNVC: 2
396 466 08 40: RNCC: 5 | RNVC: 2

16 Aug 1991

5340-12-368-4981
Lock-Release Lever

123684981
GN212.3-21-M8-25-D: RNCC: 3 | RNVC: 2

17 Mar 2006

5340-12-323-1843
Mounting Bracket

123231843
702-146130-901-0: RNCC: 3 | RNVC: 2

30 Oct 1990

5340-12-151-7811
Resilient Mount

121517811
DIN95369-A4-6-CR-NMST: RNCC: 2 | RNVC: 2
550-0438: RNCC: 5 | RNVC: 2
C2125AG: RNCC: 5 | RNVC: 2
550-0438: RNCC: 5 | RNVC: 2
151007-M12-CR.AM-80: RNCC: 5 | RNVC: 2
60-201-080 A: RNCC: 5 | RNVC: 2
550-0438: RNCC: 5 | RNVC: 9
VG95369-A4-6-CR-NMST: RNCC: 5 | RNVC: 9
C2125PAG: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-187-5172
Mending Plate

121875172
2300109-820000.008.0: RNCC: 2 | RNVC: 2
2300109-820000.008.0: RNCC: 3 | RNVC: 2
2300109-820000.008.0: RNCC: 3 | RNVC: 2
2300109-820000-008-0: RNCC: 5 | RNVC: 9
2300109-820000.008.0: RNCC: 5 | RNVC: 9
2300109-820000-008-0: RNCC: 5 | RNVC: 9
2300109-820000-008-0: RNCC: 5 | RNVC: 9

13 Apr 1981

5340-12-321-5299
Loop Clamp

123215299
DIN3016-1-D1-30X12-W5-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-30X12-W5: RNCC: 3 | RNVC: 2
RSGU1.30/12-W5: RNCC: 3 | RNVC: 2
RSGU1100.30/12 W5: RNCC: 5 | RNVC: 2
DIN3016-D1-30X12-W5: RNCC: 5 | RNVC: 9

29 May 1990

5340-12-701-4826
Loop Clamp

127014826
VG95211-ML-127014826: RNCC: 2 | RNVC: 2
5.12.5811.8070.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-136-3698

5340-12-123-9733
Loop Clamp

121239733
ASS: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-186-5263
Dust And Moisture Seal Protective Plug

121865263
R900002940: RNCC: 3 | RNVC: 2
002940: RNCC: 5 | RNVC: 9

14 Jan 1981

5340-12-305-2585
Angle Bracket

123052585
4900059-221458.000.0/15: RNCC: 3 | RNVC: 2
4900059-221458.015.0: RNCC: 5 | RNVC: 2

15 Oct 1985

5340-12-305-2628
Double Angle Bracket

123052628
P-296895-007: RNCC: 3 | RNVC: 2
P296895-007: RNCC: 5 | RNVC: 2

15 Oct 1985

5340-12-701-6920
Mounting Plate

127016920
VG95211-ML-127016920: RNCC: 2 | RNVC: 2
5.12.7220.2631.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-182-6900
Resilient Mount

121826900
351-002-231910-000-0: RNCC: 3 | RNVC: 2
351-002-231910-000-0: RNCC: 5 | RNVC: 9

20 Feb 1980

5340-12-393-7640
Mounting Bracket

123937640
11.44043-0037: RNCC: 3 | RNVC: 2
11.44043-0037: RNCC: 5 | RNVC: 2

9 Oct 2013

5340-12-702-5378
Mounting Bracket

127025378
VG95211-ML-127025378: RNCC: 2 | RNVC: 2
5.51.7204.1255.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-344-2362
Protection Bellows

123442362
V6-603: RNCC: 3 | RNVC: 2

6 Oct 1997

5340-12-198-2699
Angle Bracket

121982699
A-296710-149: RNCC: 3 | RNVC: 2
A296710-149: RNCC: 5 | RNVC: 2

6 Jan 1984

5340-12-361-2133
Angle Bracket

123612133
J92228343-401: RNCC: 3 | RNVC: 2

4 Sep 2003

5340-12-382-7808
Spring Holder

123827808
V6550-06010-261: RNCC: 3 | RNVC: 2

9 Aug 2010

5340-12-316-5527
Mounting Bracket

123165527
C72165-A421-C352: RNCC: 3 | RNVC: 2

25 Jan 1989

5340-12-329-1551
Casement Fastener

123291551
2653-189470.00: RNCC: 2 | RNVC: 2
2653-189470.00: RNCC: 3 | RNVC: 2

22 Jul 1992

5340-12-337-9860
Access Cover

123379860
230-133.29: RNCC: 3 | RNVC: 2
PK-HH-48: RNCC: 5 | RNVC: 2

9 May 1995

5340-12-356-6083
Hand Crank

123566083
GN471-125-B14: RNCC: 3 | RNVC: 2

15 Mar 2002

5340-12-327-3819
Filler Opening Cap

123273819
DIN73400-DV40KL-ABSCHLIESZBAR: RNCC: 2 | RNVC: 2
096 200 42: RNCC: 3 | RNVC: 2
DV40KL DIN73400-ABSCHLIESZBAR: RNCC: 5 | RNVC: 2

16 Jan 1992

5340-12-176-9507
Dust And Moisture Seal Protective Cap

121769507
84053/1200-10: RNCC: 3 | RNVC: 2
84053-1200-10: RNCC: 5 | RNVC: 9

3 Jan 1979

5340-12-702-1703
Mounting Bracket

127021703
VG95211-ML-127021703: RNCC: 2 | RNVC: 2
30.7114.140: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-316-8997
Mounting Bracket

123168997
2500168-0910: RNCC: 2 | RNVC: 2
7830434-0910: RNCC: 3 | RNVC: 2

22 Feb 1989

5340-12-305-4556
Mending Plate

123054556
2500121-111210.01: RNCC: 2 | RNVC: 2
2500121-111210.01: RNCC: 3 | RNVC: 2
2500121-111210.01: RNCC: 5 | RNVC: 9

8 Nov 1985

5340-12-355-4004
Multiple Angle Bracket

123554004
4634780140: RNCC: 3 | RNVC: 2

12 Nov 2001

5340-12-193-8517
Dust And Moisture Seal Protective Cap

121938517
10G122: RNCC: 3 | RNVC: 2
0595.0103: RNCC: 5 | RNVC: 2
10G122: RNCC: 5 | RNVC: 9

7 Sep 1982

5340-12-316-5760
Gabelkopf

5340-12-335-7910
Spacing Threaded Standoff

123357910
VG95148C5,5XM3X30-CUZN: RNCC: 2 | RNVC: 2
5.13.303: RNCC: 3 | RNVC: 2
VG94148-C5,5XM3X30-CUZN: RNCC: 3 | RNVC: 2
DIAM3SW5.5X30MSVN: RNCC: 5 | RNVC: 9

15 Sep 1994

5340-12-312-6012
Spring Loaded Cylinder Fastener

123126012
2300216-183330.000.0: RNCC: 2 | RNVC: 2
604-53.83.401-18: RNCC: 3 | RNVC: 2
2300216-183330.000.0: RNCC: 3 | RNVC: 2

20 Jan 1988

5340-12-337-2050
Access Cover

123372050
2500255-193800.001.0: RNCC: 2 | RNVC: 2
2500255-193800.001.0: RNCC: 3 | RNVC: 2
2500255-193800-001.0: RNCC: 5 | RNVC: 2

1 Feb 1995

5340-12-196-9025
Angle Bracket

121969025
P-295614-001: RNCC: 3 | RNVC: 2
P295614-001: RNCC: 5 | RNVC: 2

30 Aug 1983

5340-12-311-3082
Mending Plate

123113082
P-244239-015: RNCC: 3 | RNVC: 2
P244239-015: RNCC: 5 | RNVC: 2

14 Aug 1987

5340-12-359-9495
Mounting Bracket

123599495
2500261-185270.001.0: RNCC: 2 | RNVC: 2
2500261-185270.001.0: RNCC: 3 | RNVC: 2

24 Mar 2003

5340-12-145-4379
Loop Clamp

121454379
DIN3016-2-G1-28X15-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-28X15-W1-2: RNCC: 3 | RNVC: 2
SP28/15SKZ: RNCC: 3 | RNVC: 2
SP28-15SKZ: RNCC: 5 | RNVC: 2
102062028153: RNCC: 5 | RNVC: 2
1410000028: RNCC: 5 | RNVC: 2
DIN3016-G1-28X15-W1-2: RNCC: 5 | RNVC: 9
VG95931-G28X15-W1: RNCC: 5 | RNVC: 9
VG95931G28X15W1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-172-2864
Retaining Strap

121722864
81255030132: RNCC: 3 | RNVC: 2
6041212017: RNCC: 5 | RNVC: 2
81.25503-0132: RNCC: 5 | RNVC: 2

10 Jan 1978

5340-12-329-8022
Detent Plunger

123298022
1300555-581300-02-01: RNCC: 2 | RNVC: 2
563.00-30.02: RNCC: 3 | RNVC: 2
VS5023T141: RNCC: 5 | RNVC: 2
VS5023T141: RNCC: 5 | RNVC: 9

1 Oct 1992

5340-12-357-8450
Webbing Strap

123578450
79115-1500: RNCC: 3 | RNVC: 2

1 Aug 2002

5340-12-308-2365
Double Angle Bracket

123082365
5800043-2300.03: RNCC: 2 | RNVC: 2
5800043-2300.03: RNCC: 3 | RNVC: 2

18 Sep 1986

5340-12-339-7839
Lock-Release Lever

123397839
87-401.45-00.00-05: RNCC: 3 | RNVC: 2

17 Jan 1996

5340-12-339-7825
Webbing Strap

123397825
9816-600: RNCC: 2 | RNVC: 2
9816-600: RNCC: 3 | RNVC: 2
000-D6-25X2,0X2500-PE-RAL7013: RNCC: 6 | RNVC: 9

17 Jan 1996

5340-12-363-3157
Snap-In Plain Standoff

123633157
GSTR99-00-200000.12: RNCC: 3 | RNVC: 2

26 May 2004

5340-12-164-9095
Clamp Bolt Assembly

121649095
5801209-57-014: RNCC: 3 | RNVC: 2
C42123-A19-A1: RNCC: 5 | RNVC: 2
5801209-57.014: RNCC: 5 | RNVC: 2
C42123A19A1: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-319-9673
Resilient Mount

123199673
E1H 42-12 ED: RNCC: 3 | RNVC: 2
E1H42-12ED: RNCC: 5 | RNVC: 2

23 Nov 1989

5340-12-353-6873
Angle Bracket

123536873
J92222510-403: RNCC: 3 | RNVC: 2

26 Apr 2001

5340-12-310-6755
Angle Bracket

123106755
2300033-300000-29U: RNCC: 2 | RNVC: 2
2300033-300000-29U: RNCC: 5 | RNVC: 9
2300033-300000-29U: RNCC: 5 | RNVC: 9

15 Jun 1987

5340-12-179-7387
Access Cover

121797387
5800828-147-001: RNCC: 3 | RNVC: 2
5800828-147.001: RNCC: 5 | RNVC: 2

25 Jul 1979

5340-12-342-2666
Mounting Bracket

123422666
5802295-123510.00: RNCC: 2 | RNVC: 2
7802628145: RNCC: 3 | RNVC: 2
5802295-123510.00: RNCC: 5 | RNVC: 2
78026 28145: RNCC: 5 | RNVC: 9
5802295-123510: RNCC: 5 | RNVC: 9

14 Jan 1997

5340-12-377-2421
Bumper

123772421
309066: RNCC: 3 | RNVC: 2
2171-02-13-00/26: RNCC: 5 | RNVC: 2

18 Dec 2008

5340-12-346-0192
Spacing Threaded Standoff

123460192
61068-000: RNCC: 3 | RNVC: 2
N61068-000: RNCC: 5 | RNVC: 2

29 May 1998

5340-12-333-9432
Resilient Mount

123339432
DIN95363-A20X15-M6X16-NR70ST: RNCC: 2 | RNVC: 2
500021-M6X16.NR70.ST: RNCC: 5 | RNVC: 2
781050HART: RNCC: 5 | RNVC: 2
VG95363-A20X15-M6X16-NR70ST: RNCC: 5 | RNVC: 9

24 Feb 1994

5340-12-350-1099
Loop Clamp

123501099
211-15250: RNCC: 3 | RNVC: 2
25C: RNCC: 5 | RNVC: 2

16 Feb 2000

5340-12-363-4684
Angle Bracket

123634684
J21520061-403: RNCC: 3 | RNVC: 2

18 Jun 2004

5340-12-301-8869
Kunst Gleitschiene

123018869
20-4270-023: RNCC: 3 | RNVC: 2

15 Nov 1984

5340-12-178-2325
Turnbuckle

121782325
VG95211-ML-121782325: RNCC: 2 | RNVC: 2
160-88793: RNCC: 3 | RNVC: 2
160-88793: RNCC: 5 | RNVC: 9

9 Apr 1979

5340-12-315-2799
Access Door

123152799
NO PRIMARY REF 12-315-2799: RNCC: 3 | RNVC: 2
5716 173037: RNCC: 5 | RNVC: 9

8 Oct 1988

5340-12-158-2889
Electrical-Mechanical Equipment Post

121582889
512201-2323.000: RNCC: 3 | RNVC: 2
512201-2323: RNCC: 5 | RNVC: 2
6736-12225-47: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-316-0074
Mounting Bracket

123160074
54.0046.911.00: RNCC: 3 | RNVC: 2

14 Dec 1988

5340-12-196-2546
Angle Bracket

121962546
03590100: RNCC: 3 | RNVC: 2

20 Jun 1983

5340-12-369-2443
Double Angle Bracket

123692443
S334M1001101: RNCC: 2 | RNVC: 2
S334M1001101: RNCC: 3 | RNVC: 2

8 Jun 2006

5340-12-363-1021
Mounting Bracket

123631021
3521500673: RNCC: 3 | RNVC: 2

4 May 2004

5340-12-355-9912
Dust And Moisture Seal Protective Cap

123559912
86262: RNCC: 3 | RNVC: 2

11 Jan 2002

5340-12-372-0461
Mounting Bracket

123720461
S281M3038102: RNCC: 2 | RNVC: 2
S281M3038102: RNCC: 3 | RNVC: 2

13 Jun 2007

5340-12-193-3086
Pad Eye

121933086
4605460543: RNCC: 3 | RNVC: 2
721 2 85 368 1: RNCC: 5 | RNVC: 9

12 Jul 1982

5340-12-304-3301
Mortise Lock Set

123043301
1 34 020: RNCC: 3 | RNVC: 9

5 Jul 1985

5340-12-372-1776
Mounting Plate

123721776
2 0000-669: RNCC: 3 | RNVC: 2
2 0000-669: RNCC: 5 | RNVC: 2

25 Jun 2007

5340-12-352-4971
Mounting Bracket

123524971
521910-970134.000.0: RNCC: 2 | RNVC: 2
521910-970134.000.0: RNCC: 3 | RNVC: 2
1271549: RNCC: 5 | RNVC: 2

22 Nov 2000

5340-12-196-8856
Clamping Catch

121968856
0122D101577/1-1: RNCC: 3 | RNVC: 2

29 Aug 1983

5340-12-182-7686
Casement Fastener

121827686
2163984KZ0150-56: RNCC: 3 | RNVC: 2
0216 3984: RNCC: 5 | RNVC: 2
2163984UE0150-56: RNCC: 5 | RNVC: 2
02163984: RNCC: 5 | RNVC: 2
2163984KZ0150-56: RNCC: 5 | RNVC: 2
89233121: RNCC: 5 | RNVC: 2
2300033-430100-07: RNCC: 5 | RNVC: 9
2300033-430100-07: RNCC: 5 | RNVC: 9
2300033-430100.07: RNCC: 5 | RNVC: 9
2163984: RNCC: 5 | RNVC: 9

25 Feb 1980

5340-12-323-8161
Mounting Bracket

123238161
5802301-207000.00: RNCC: 2 | RNVC: 2
5802301-207000.00: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-12-385-2269
Access Door Locking Ring

123852269
F1.1189-40-40-10.00-02: RNCC: 3 | RNVC: 2

11 May 2011

5340-12-144-5354
Door Handle

121445354
0021-3513-690: RNCC: 3 | RNVC: 2
21-3513-69: RNCC: 5 | RNVC: 2
0021-3513-690: RNCC: 5 | RNVC: 9
21-3513-69: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-196-3728
Handwheel

121963728
15418: RNCC: 3 | RNVC: 2

30 Jun 1983

5340-12-352-6336
Mounting Bracket

123526336
1216 3297: RNCC: 3 | RNVC: 2

1 Dec 2000

5340-12-378-1124
Bumper

123781124
0501 317 437: RNCC: 3 | RNVC: 2

13 Mar 2009

5340-12-387-9754
Support Hook

123879754
5803706-101113.00: RNCC: 2 | RNVC: 2
0106.11130.170: RNCC: 3 | RNVC: 2

13 Feb 2012

5340-12-166-9097
Retaining Strap

121669097
5800748-11.127: RNCC: 3 | RNVC: 2
5800748-11-127: RNCC: 5 | RNVC: 9

29 Oct 1976

5340-12-301-7860
Metal Runner

123017860
1000163-372000.002.0: RNCC: 3 | RNVC: 2

9 Nov 1984

5340-12-386-1330
Manual Control Lever

123861330
2481-391231.001.0: RNCC: 2 | RNVC: 2
2481-391231.001.0: RNCC: 3 | RNVC: 2

10 Aug 2011

5340-12-332-5110
Turnbuckle

123325110
5200.230.041.000.3: RNCC: 3 | RNVC: 9
SP08897: RNCC: 5 | RNVC: 2
5200.230.041.000: RNCC: 5 | RNVC: 9
5200230041000: RNCC: 5 | RNVC: 9
52002300410003: RNCC: 5 | RNVC: 9

18 Aug 1993

5340-12-302-6513
Webbing Strap

123026513
DAN80-1: RNCC: 3 | RNVC: 2

21 Jan 1985

5340-12-394-3426
Mounting Bracket

123943426
10222-187021.000.0: RNCC: 2 | RNVC: 2
10222-187021.000.0: RNCC: 3 | RNVC: 2

22 Nov 2013

5340-12-339-7654
Helical Compression Spring Seat

123397654
81434315020: RNCC: 3 | RNVC: 2
81.43431.5020: RNCC: 5 | RNVC: 2

15 Jan 1996

5340-12-319-5676
Handle Grip

123195676
03522400: RNCC: 3 | RNVC: 2

13 Oct 1989

5340-12-174-7145

5340-12-360-9948
Mounting Bracket

123609948
0853 9350.009: RNCC: 3 | RNVC: 2

6 Aug 2003

5340-12-196-5918
Dust And Moisture Seal Protective Cap

121965918
5944330: RNCC: 3 | RNVC: 2

20 Jul 1983

5340-12-362-6645
Manual Control Lever

123626645
1935443K14: RNCC: 3 | RNVC: 2

17 Mar 2004

5340-12-316-2003
Compression Cup

123162003
4069875041: RNCC: 3 | RNVC: 2

30 Dec 1988

5340-12-145-6993

5340-12-328-9693
Helical Compression Spring Seat

123289693
2653-054140.04: RNCC: 2 | RNVC: 2
2653-054140.04: RNCC: 3 | RNVC: 2

4 Jul 1992

5340-12-702-6119
Loop Clamp

127026119
VG95211-ML-127026119: RNCC: 2 | RNVC: 2
5893A-25: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-316-8892
Nonmetallic Bumper

123168892
9151830664: RNCC: 3 | RNVC: 2
467-418/5183-01-10-00: RNCC: 5 | RNVC: 2

22 Feb 1989

5340-12-323-2282
Door Button

123232282
1000-U152: RNCC: 3 | RNVC: 2
200-9301: RNCC: 3 | RNVC: 2
13 9000 341: RNCC: 5 | RNVC: 2

5 Nov 1990

5340-12-702-4940
Mounting Bracket

127024940
VG95211-ML-127024940: RNCC: 2 | RNVC: 2
5.51.5101.1140.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-188-5378
Loop Clamp

121885378
4200029-0.2: RNCC: 2 | RNVC: 2
4200029-02: RNCC: 5 | RNVC: 9

16 Jul 1981

5340-12-177-1352
Dust And Moisture Seal Protective Plug

121771352
5800822-06-015: RNCC: 3 | RNVC: 2
5800822-06.015: RNCC: 5 | RNVC: 2

17 Jan 1979

5340-12-313-6276
Retaining Strap

123136276
DIN72571-2X8-ST-FE/NI8: RNCC: 2 | RNVC: 2
510252-0323.000: RNCC: 3 | RNVC: 2

21 Apr 1988

5340-12-166-9413
Webbing Strap

121669413
2300026-2011.00: RNCC: 2 | RNVC: 2
2300026-2011.00: RNCC: 3 | RNVC: 2
2300026-2011.00: RNCC: 3 | RNVC: 2
2300026-2011.00: RNCC: 3 | RNVC: 2
2300026-2011.00: RNCC: 5 | RNVC: 9
2300026-2011-00: RNCC: 5 | RNVC: 9
2300026-2011.00: RNCC: 5 | RNVC: 9
000-A3-25X2,5X1000-BW-RAL6031: RNCC: 6 | RNVC: 9

6 Nov 1976

5340-12-198-1424
Double Angle Bracket

121981424
5801999-330000.07: RNCC: 2 | RNVC: 2
5801999-330000.07: RNCC: 3 | RNVC: 2

22 Dec 1983

5340-12-355-1729
Turnbuckle

123551729
DIN1480-M8: RNCC: 2 | RNVC: 2

18 Oct 2001

5340-12-341-0859
Flush Lock

123410859
024545: RNCC: 3 | RNVC: 2

25 Jul 1996

5340-12-320-3515
Electrical-Mechanical Equipment Post

123203515
VG95148C5XM3X25-2.0380.30-E2A: RNCC: 2 | RNVC: 2
GBM 3050 25: RNCC: 3 | RNVC: 2
VG95/48C5XM3X25-2.0380.30-E2A: RNCC: 3 | RNVC: 2
GBM 3050 25: RNCC: 5 | RNVC: 9

5 Jan 1990

5340-12-316-1138
Electrical-Mechanical Equipment Post

123161138
VG95148C7XM4X10-2.0380.30-E2A: RNCC: 2 | RNVC: 2
5.14.103: RNCC: 3 | RNVC: 2
VG95148C7XM4X10-2.0380.30-E2A: RNCC: 3 | RNVC: 2
43613-029: RNCC: 3 | RNVC: 2
43 613-029: RNCC: 5 | RNVC: 9

23 Dec 1988

5340-12-196-9856
Angle Bracket

121969856
A-230129-225: RNCC: 3 | RNVC: 2
A230129-225: RNCC: 5 | RNVC: 2

7 Sep 1983

5340-12-197-5601
Double Angle Bracket

121975601
A-295112-001: RNCC: 3 | RNVC: 2
A295112-001: RNCC: 5 | RNVC: 2

2 Nov 1983

5340-12-169-7361
Retaining Clip

121697361
42860: RNCC: 3 | RNVC: 2
035670: RNCC: 5 | RNVC: 2
136679: RNCC: 5 | RNVC: 2
1416625: RNCC: 5 | RNVC: 2
4153-553: RNCC: 5 | RNVC: 2
02.1001.10.00: RNCC: 5 | RNVC: 2
166-4345: RNCC: 5 | RNVC: 9

3 Jun 1977

5340-12-185-3989
Electrical-Mechanical Equipment Post

121853989
4559703: RNCC: 3 | RNVC: 2
5801715-030300-003: RNCC: 5 | RNVC: 9
5801715-030300.003: RNCC: 5 | RNVC: 9

3 Oct 1980

5340-12-337-7034
Spring Tension Clip

123377034
12278: RNCC: 3 | RNVC: 2
0059885878: RNCC: 5 | RNVC: 2
01-1902: RNCC: 5 | RNVC: 2

30 Mar 1995

5340-12-378-1956
Mounting Bracket

123781956
9997001-064230.000.0: RNCC: 3 | RNVC: 2

18 Mar 2009

5340-12-320-6374
Loop Clamp

123206374
JS1101-43: RNCC: 3 | RNVC: 2

2 Feb 1990

5340-12-347-8717
Manual Control Handle

123478717
409065885: RNCC: 3 | RNVC: 2
5L.6097.014.71: RNCC: 5 | RNVC: 2
409-065 885: RNCC: 5 | RNVC: 2

1 Mar 1999

5340-12-156-9500
Resilient Mount

121569500
845-E1E805S72AL: RNCC: 3 | RNVC: 2
E1E 805S 72 AL: RNCC: 3 | RNVC: 2
OG0718404: RNCC: 5 | RNVC: 2
OG0718404: RNCC: 5 | RNVC: 2
E1E805S72AL: RNCC: 5 | RNVC: 2
0G0718404: RNCC: 5 | RNVC: 9
EIE805S72AL: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-365-1588
Mounting Bracket

123651588
300.011.460: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-12-367-9248
Dust And Moisture Seal Protective Cap

123679248
210ZL15X20: RNCC: 3 | RNVC: 2

7 Nov 2005

5340-12-302-5269
Manual Control Handle

123025269
1165220: RNCC: 3 | RNVC: 2
F-2653-1-4: RNCC: 5 | RNVC: 2
165220: RNCC: 5 | RNVC: 9

10 Jan 1985

5340-12-323-4768
Webbing Strap

123234768
7156901: RNCC: 3 | RNVC: 2

29 Nov 1990

5340-12-323-5166
Mounting Bracket

123235166
6030700840: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-12-371-4776
Pad Eye

123714776
23302-181720.00: RNCC: 2 | RNVC: 2
23302-181720.00: RNCC: 3 | RNVC: 2
2660457: RNCC: 5 | RNVC: 2

4 Apr 2007

5340-12-164-3051
Retaining Strap

121643051
23290-031010: RNCC: 2 | RNVC: 2
23290-031010: RNCC: 3 | RNVC: 2
23290-031010: RNCC: 5 | RNVC: 9
23290-031010: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-186-2955
Dust And Moisture Seal Protective Cap

121862955
PAN3860-05R: RNCC: 3 | RNVC: 2

13 Dec 1980

5340-12-145-9540
Butt Hinge

121459540
5800494-1130: RNCC: 3 | RNVC: 2
5800494-1130: RNCC: 5 | RNVC: 9
5800494-1130: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-163-3423
Helical Compression Spring Seat

121633423
3420120003: RNCC: 3 | RNVC: 2
WMS2218-506X: RNCC: 5 | RNVC: 2
0003015094: RNCC: 5 | RNVC: 2
0003015142: RNCC: 5 | RNVC: 2
3015094: RNCC: 5 | RNVC: 9
3015142: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-365-9553
Nonmetallic Bumper

123659553
0009191196: RNCC: 3 | RNVC: 2

22 Feb 2005

5340-12-323-5936
Mounting Bracket

123235936
0289 5404: RNCC: 3 | RNVC: 2
02895404ED0608-70: RNCC: 5 | RNVC: 9

11 Dec 1990

5340-12-196-9873
Angle Bracket

121969873
A-230129-035: RNCC: 3 | RNVC: 2
A230129-035: RNCC: 5 | RNVC: 2

7 Sep 1983

5340-12-328-9771
Spring Tension Clip

123289771
DEFO-ES-BOLZEN 8X32: RNCC: 3 | RNVC: 2
1011008802: RNCC: 3 | RNVC: 2

4 Jul 1992

5340-12-197-8189
Butt Hinge Leaf

121978189
3385101: RNCC: 3 | RNVC: 2

24 Nov 1983

5340-12-335-0507
Angle Bracket

123350507
0048-204000A06B: RNCC: 2 | RNVC: 2
0048-204000A06B: RNCC: 3 | RNVC: 2

18 Jul 1994

5340-12-359-9326
Threaded Rod End

123599326
2500261-180000.231.0: RNCC: 2 | RNVC: 2
2500261-180000.231.0: RNCC: 3 | RNVC: 2

21 Mar 2003

5340-12-701-3713
Mounting Plate

127013713
VG95211-ML-127013713: RNCC: 2 | RNVC: 2
5.12.5303.0910.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-177-1571
Angle Bracket

121771571
5801214-2-050: RNCC: 3 | RNVC: 2
5801214-2.050: RNCC: 5 | RNVC: 2

17 Jan 1979

5340-12-311-2499
Angle Bracket

123112499
P-244512-755: RNCC: 3 | RNVC: 2
P244512-755: RNCC: 5 | RNVC: 2

10 Aug 1987

5340-12-343-0879
Spacing Threaded Standoff

123430879
VG95148C5,5XM3X14-CUZN: RNCC: 2 | RNVC: 2
VG95148-C5,5XM3X14-CUZN: RNCC: 3 | RNVC: 2
18H2028: RNCC: 3 | RNVC: 2
6.07019: RNCC: 5 | RNVC: 2
6.07019.0: RNCC: 5 | RNVC: 2

28 Apr 1997

5340-12-371-4426
Butt Hinge

123714426
2500278-191770.000.0: RNCC: 3 | RNVC: 2

30 Mar 2007

5340-12-140-6762
Strap Fastener Loop

121406762
R16880: RNCC: 3 | RNVC: 2
4060013: RNCC: 3 | RNVC: 2
4060-013: RNCC: 5 | RNVC: 2
R23688: RNCC: 5 | RNVC: 9
R16880: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-167-2865
Mending Plate

121672865
66.3508.140.03-A006: RNCC: 3 | RNVC: 2
66-3508-140-03A006: RNCC: 5 | RNVC: 9

8 Dec 1976

5340-12-179-3829
Angle Bracket

121793829
5800828-1474-002: RNCC: 3 | RNVC: 2
5800828-1474.002: RNCC: 5 | RNVC: 2

27 Jun 1979

5340-12-701-9878
Threaded End Tensioning Tie Rod

127019878
VG95211-ML-127019878: RNCC: 2 | RNVC: 2
155N1220-22CH2-640: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-176-4854
Angle Bracket

121764854
81658022136: RNCC: 3 | RNVC: 2
00001209080: RNCC: 5 | RNVC: 2
81.65802-2136: RNCC: 5 | RNVC: 2

30 Nov 1978

5340-12-151-5013
Dust And Moisture Seal Protective Cap

121515013
23111-4230.00: RNCC: 2 | RNVC: 2
23111-4230.00: RNCC: 3 | RNVC: 2
23111-4230.00: RNCC: 5 | RNVC: 9
23111-4230-00: RNCC: 5 | RNVC: 9
23111-4230-00: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-394-4012
Access Cover

123944012
310191: RNCC: 3 | RNVC: 2
5184-03-13-01/37: RNCC: 5 | RNVC: 2

28 Nov 2013

5340-12-188-2642
Mounting Plate

121882642
4312 712 18890: RNCC: 3 | RNVC: 2
431271218890: RNCC: 5 | RNVC: 2
5801685-421000-02: RNCC: 5 | RNVC: 9
5801685-421000.02: RNCC: 5 | RNVC: 9

23 Jun 1981

5340-12-314-2816
Resilient Mount

123142816
0224 7341: RNCC: 3 | RNVC: 2
02247341KZ0150-47: RNCC: 5 | RNVC: 2

23 Jun 1988

5340-12-178-8738
Nonmetallic Bumper

121788738
CF419004BR: RNCC: 3 | RNVC: 2
CF 419 004 BR: RNCC: 5 | RNVC: 2
CF419004BR: RNCC: 5 | RNVC: 2
CF 419 004 BR: RNCC: 5 | RNVC: 2
CF419004BR: RNCC: 5 | RNVC: 2
CF 419 004 BR: RNCC: 5 | RNVC: 2

22 May 1979

5340-12-322-3343
Dust And Moisture Seal Protective Cap

123223343
1234620523: RNCC: 3 | RNVC: 2

13 Aug 1990

5340-12-197-2059
Angle Bracket

121972059
4354265340: RNCC: 3 | RNVC: 2
4354265340: RNCC: 5 | RNVC: 2

29 Sep 1983

5340-12-352-9878
Loop Clamp

123529878
M01481: RNCC: 3 | RNVC: 2

16 Jan 2001

5340-12-300-6696
Double Angle Bracket

123006696
4355221740: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-315-6623
Mending Plate

123156623
512214-0414.000: RNCC: 3 | RNVC: 2
512214-0414: RNCC: 5 | RNVC: 2

18 Nov 1988

5340-12-197-3554
Angle Bracket

121973554
5801352-7320.04: RNCC: 3 | RNVC: 2
5801352-7320-04: RNCC: 5 | RNVC: 2
5801352-7320-04: RNCC: 5 | RNVC: 9
5801352-7320.04: RNCC: 5 | RNVC: 9

17 Oct 1983

5340-12-342-9047
Mechanical Stop

123429047
5011-015: RNCC: 3 | RNVC: 2

14 Apr 1997

5340-12-354-9626
Mounting Bracket

123549626
8854 428-111: RNCC: 3 | RNVC: 2

11 Sep 2001

5340-12-174-8261
Mending Plate

121748261
009-039.162-011: RNCC: 3 | RNVC: 2
12791-128000-011: RNCC: 5 | RNVC: 2
12791-128000-011: RNCC: 5 | RNVC: 9
12791-128000.011: RNCC: 5 | RNVC: 9
009-039-162-011: RNCC: 5 | RNVC: 9

7 Aug 1978

5340-12-306-9313
Retaining Strap

123069313
23110-1900.24: RNCC: 2 | RNVC: 2
23110-1900.24: RNCC: 3 | RNVC: 2
23110-1900-24: RNCC: 5 | RNVC: 9
23110-1900.24: RNCC: 5 | RNVC: 9
23110-1900-24: RNCC: 5 | RNVC: 9

17 Apr 1986

5340-12-348-9867
Mechanical Stop

123489867
245/7346-43-00-11: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-12-192-0776
Nonmetallic Bumper

121920776
406-477-01-17: RNCC: 3 | RNVC: 2
2695-344: RNCC: 5 | RNVC: 2
2695344: RNCC: 5 | RNVC: 2
406-477-01-17: RNCC: 5 | RNVC: 9

23 Mar 1982

5340-12-343-9762
Spacing Threaded Standoff

123439762
C41107-A467-C312: RNCC: 3 | RNVC: 2
35627054: RNCC: 3 | RNVC: 2
C41107A467C312: RNCC: 5 | RNVC: 2

21 Aug 1997

5340-12-186-1802
Clamping Catch

121861802
513420-0102-000: RNCC: 3 | RNVC: 2
513420-0102.000: RNCC: 3 | RNVC: 2
51 34 20-0102: RNCC: 5 | RNVC: 2
513420-0102: RNCC: 5 | RNVC: 2

5 Dec 1980

5340-12-193-7814
Lock-Release Lever

121937814
C22136-A1000-C16: RNCC: 3 | RNVC: 2
C22136A1000C16: RNCC: 5 | RNVC: 2

30 Aug 1982

5340-12-311-8298
Access Cover

123118298
07-776350: RNCC: 3 | RNVC: 2
521068: RNCC: 5 | RNVC: 2
07776350: RNCC: 5 | RNVC: 2

21 Oct 1987

5340-12-326-3345
Access Cover

123263345
2702028000: RNCC: 3 | RNVC: 2
27020-28000: RNCC: 5 | RNVC: 9

2 Sep 1991

5340-12-159-0385
Double Angle Bracket

121590385
214.50056/01: RNCC: 3 | RNVC: 2
214-50056: RNCC: 5 | RNVC: 2
214.50056: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-195-7620
Strap Hinge

121957620
2500067-102200.02: RNCC: 2 | RNVC: 2
2500067-102200.02: RNCC: 3 | RNVC: 2
2500067-102200.02: RNCC: 3 | RNVC: 2
2500067-102200-02: RNCC: 5 | RNVC: 2
2500067-102200.02: RNCC: 5 | RNVC: 9

13 Apr 1983

5340-12-320-4723
Mending Plate

123204723
33019-004-018: RNCC: 3 | RNVC: 2
33019-04-18: RNCC: 5 | RNVC: 9

18 Jan 1990

5340-12-358-0941
Mounting Bracket

123580941
J21220127-003: RNCC: 3 | RNVC: 2
009369414: RNCC: 5 | RNVC: 2

12 Sep 2002

5340-12-329-1552
Casement Fastener

123291552
2653-189460.00: RNCC: 2 | RNVC: 2
2653-189460.00: RNCC: 3 | RNVC: 2

22 Jul 1992

5340-12-384-2338
Spring Loaded Cylinder Fastener

123842338
03092-02206: RNCC: 3 | RNVC: 2

4 Feb 2011

5340-12-010-0889

5340-12-005-1068

5340-12-090-6975

5340-12-334-4196
Lock-Release Lever

123344196
1673051400: RNCC: 3 | RNVC: 2
16730514: RNCC: 5 | RNVC: 2

5 May 1994

5340-12-393-8551
Retaining Band

123938551
D4988504120000: RNCC: 3 | RNVC: 2

16 Oct 2013

5340-12-323-9485
Mounting Plate

123239485
0210 1292: RNCC: 3 | RNVC: 2

10 Jan 1991

5340-12-311-8525
Helical Compression Spring Seat

123118525
K84.2520.01: RNCC: 3 | RNVC: 2
51.04103.0079: RNCC: 5 | RNVC: 2
51041030079: RNCC: 5 | RNVC: 2

22 Oct 1987

5340-12-345-6748
Nonmetallic Bumper

123456748
B39190102: RNCC: 3 | RNVC: 2

14 Apr 1998

5340-12-050-6222

5340-12-379-3060
Turnbuckle

123793060
308500008: RNCC: 3 | RNVC: 2

13 Jul 2009

5340-12-042-1617

5340-12-357-1654
Webbing Strap

123571654
909143805: RNCC: 2 | RNVC: 2
909143805: RNCC: 3 | RNVC: 2

14 May 2002

5340-12-319-6830
Escutcheon Plate

123196830
2300035-230450.03: RNCC: 2 | RNVC: 2

25 Oct 1989

5340-12-197-5026
Dust And Moisture Seal Protective Cap

121975026
158394: RNCC: 3 | RNVC: 2
158394: RNCC: 5 | RNVC: 9

27 Oct 1983

5340-12-350-8222
Angle Bracket

123508222
8331597540: RNCC: 3 | RNVC: 2
833 159 75 40: RNCC: 5 | RNVC: 2

25 May 2000

5340-12-043-9167

5340-12-302-2057
Mending Plate

123022057
5125888: RNCC: 3 | RNVC: 2

8 Dec 1984

5340-12-303-6767
Angle Bracket

123036767
3627021013: RNCC: 3 | RNVC: 2
36270 21013: RNCC: 5 | RNVC: 9

22 Apr 1985

5340-12-040-4550

5340-12-340-4856
Mounting Bracket

123404856
ML: RNCC: 3 | RNVC: 2

23 Apr 1996

5340-12-197-2138
Pipe Bracket

121972138
10.73.01.18: RNCC: 2 | RNVC: 2
10.73.01.18: RNCC: 5 | RNVC: 2

29 Sep 1983

5340-12-340-5339
Angle Bracket

123405339
5901871940: RNCC: 3 | RNVC: 2
590 187 19 40: RNCC: 5 | RNVC: 2

26 Apr 1996

5340-12-154-6072
Turnbuckle

121546072
8200600640: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-350-2220
Retaining Bail

123502220
10063-132000: RNCC: 3 | RNVC: 2
10063-132000: RNCC: 5 | RNVC: 9

29 Feb 2000

5340-12-322-8284
Headless Straight Rod

123228284
5838.04.066: RNCC: 3 | RNVC: 2

26 Sep 1990

5340-12-320-5651
Angle Bracket

123205651
0241 1569: RNCC: 3 | RNVC: 2
02411569KZ0147-39: RNCC: 5 | RNVC: 2

26 Jan 1990

5340-12-315-0210
Double Angle Bracket

123150210
66.3513.206.00-A001: RNCC: 3 | RNVC: 2
293193: RNCC: 5 | RNVC: 2

8 Sep 1988

5340-12-176-8431
Dust And Moisture Seal Protective Plug

121768431
33171230296: RNCC: 3 | RNVC: 9

20 Dec 1978

5340-12-181-7818
Door Handle

121817818
183845739A: RNCC: 3 | RNVC: 2

17 Dec 1979

5340-12-339-7258
Handwheel

123397258
352589086300: RNCC: 3 | RNVC: 2
352 589 08 63 00: RNCC: 5 | RNVC: 2

4 Jan 1996

5340-12-196-6668
Angle Bracket

121966668
52.2031.550.02: RNCC: 3 | RNVC: 2

1 Aug 1983

5340-12-318-0574
Resilient Mount

123180574
4602406318: RNCC: 3 | RNVC: 2

8 Jun 1989

5340-12-164-5670

5340-12-187-6977
Retaining Strap

121876977
BSN22X20X2ZWL: RNCC: 3 | RNVC: 2
15210000022: RNCC: 5 | RNVC: 2
BSN22X20X2ZWEILASCHIG: RNCC: 5 | RNVC: 2

29 Apr 1981

5340-12-182-2224
Electrical-Mechanical Equipment Post

121822224
CF 404 460 C: RNCC: 2 | RNVC: 2
CF 404 460 C: RNCC: 3 | RNVC: 2
CF 404 460 C: RNCC: 5 | RNVC: 2
CF 404 460 B: RNCC: 5 | RNVC: 2
CF 404 460 C: RNCC: 5 | RNVC: 2
CF404460B: RNCC: 5 | RNVC: 2
CF404460B: RNCC: 5 | RNVC: 2
CF 404 460 B: RNCC: 5 | RNVC: 2
CF404460B: RNCC: 5 | RNVC: 2
CF 404 460 B: RNCC: 5 | RNVC: 2

21 Jan 1980

5340-12-318-6996
Lock-Release Lever

123186996
6132.987.4: RNCC: 3 | RNVC: 2

9 Aug 1989

5340-12-311-5323
Casement Fastener

123115323
8.011.023.000: RNCC: 3 | RNVC: 2

15 Sep 1987

5340-12-701-2684
Lock-Release Lever

127012684
5.12.4805.0212.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-181-2276
Friction Catch Stud

121812276
CF403380D: RNCC: 3 | RNVC: 2
CF 403 380 D: RNCC: 5 | RNVC: 2
CF403380D: RNCC: 5 | RNVC: 2
CF 403 380 D: RNCC: 5 | RNVC: 2
CF403380D: RNCC: 5 | RNVC: 2
CF 403 380 D: RNCC: 5 | RNVC: 2

5 Nov 1979

5340-12-390-0645
Mechanical Stop

123900645
DF 306 321 A: RNCC: 3 | RNVC: 2
DF 306 321 A: RNCC: 5 | RNVC: 2

28 Sep 2012

5340-12-301-1967
Angle Bracket

123011967
1513-882.15(3): RNCC: 3 | RNVC: 2

27 Sep 1984

5340-12-316-7196
Angle Bracket

123167196
2500194-322610.08.0: RNCC: 2 | RNVC: 2
2500194-322610.08.0: RNCC: 3 | RNVC: 2

7 Feb 1989

5340-12-388-2760
Spacing Threaded Standoff

123882760
5.13.061: RNCC: 3 | RNVC: 2

7 Mar 2012

5340-12-190-0456
Retaining Band

121900456
4-107625: RNCC: 3 | RNVC: 2

4 Nov 1981

5340-12-380-9217
Swivel Caster

123809217
0227613-7: RNCC: 3 | RNVC: 2
0227592-3: RNCC: 5 | RNVC: 2
0227613-7: RNCC: 5 | RNVC: 2

14 Dec 2009

5340-12-358-6195
Dust And Moisture Seal Protective Cover

123586195
2500262-394205.000.0: RNCC: 2 | RNVC: 2
2500262-394205.000.0: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-12-386-4826
Spacing Threaded Standoff

123864826
333011-3152.010: RNCC: 3 | RNVC: 2

5 Sep 2011

5340-12-184-6757
Butt Hinge Leaf

121846757
CF429098B: RNCC: 3 | RNVC: 2
CF 429 098 B: RNCC: 5 | RNVC: 2
CF429098B: RNCC: 5 | RNVC: 2
CF 429 098 B: RNCC: 5 | RNVC: 2

12 Aug 1980

5340-12-197-4574
Angle Bracket

121974574
V22.918.111000-02: RNCC: 3 | RNVC: 2
V22-918-111000-02: RNCC: 5 | RNVC: 2

24 Oct 1983

5340-12-316-0334
Handle Grip

123160334
570333477: RNCC: 3 | RNVC: 2

16 Dec 1988

5340-12-347-9513
Mounting Plate

123479513
54.0058.651.00: RNCC: 2 | RNVC: 2
54.0058.651.00: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-12-135-7265

5340-12-316-7578
Kunst Gleitschiene

123167578
5800777-8220.07: RNCC: 2 | RNVC: 2
5800777-8220.07: RNCC: 3 | RNVC: 2

9 Feb 1989

5340-12-301-3532
Angle Bracket

123013532
A-296655-409: RNCC: 3 | RNVC: 2
A296655-409: RNCC: 5 | RNVC: 2

9 Oct 1984

5340-12-349-7026
Seal Retaining Plate

123497026
2500238-090700.008.0: RNCC: 2 | RNVC: 2
2500238-090700.008.0: RNCC: 3 | RNVC: 2

27 Dec 1999

5340-12-312-8389
Loop Clamp

123128389
DIN3016-2-G1-360X25-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G1-360X25-W1-2: RNCC: 3 | RNVC: 2
SP360/25SK: RNCC: 3 | RNVC: 2
1069085: RNCC: 5 | RNVC: 2
1610000360: RNCC: 5 | RNVC: 2
DIN3016-G1-360X25-W1-2: RNCC: 5 | RNVC: 9
VG95931-G360X25-W1: RNCC: 5 | RNVC: 9

10 Feb 1988

5340-12-185-8584
Swivel Caster

121858584
Z02-12G1-L09-Z-A12-00: RNCC: 3 | RNVC: 2
LK-STARU125,PL120X80 GLEITLAGER: RNCC: 5 | RNVC: 2
LKSTARU125: RNCC: 5 | RNVC: 2

4 Nov 1980

5340-12-199-4536
Dust And Moisture Seal Protective Cap

121994536
800M26X1,5: RNCC: 3 | RNVC: 2
GPN800,M26X1,5 FORM A: RNCC: 5 | RNVC: 2
20581: RNCC: 5 | RNVC: 2
GPN800,F.A.M26X1,5: RNCC: 5 | RNVC: 2
779010077: RNCC: 5 | RNVC: 2
800261500: RNCC: 5 | RNVC: 2
GPN800 M26X1,5 FORM A: RNCC: 5 | RNVC: 2
GPN800-AM26X1,5: RNCC: 5 | RNVC: 2

26 Apr 1984

5340-12-343-9856
Dust And Moisture Seal Protective Plug

123439856
WI 3300 G 005: RNCC: 3 | RNVC: 2
50621: RNCC: 5 | RNVC: 2
WI 3300 G 005-4: RNCC: 5 | RNVC: 2

22 Aug 1997

5340-12-356-5802
Runner

123565802
1345553: RNCC: 3 | RNVC: 2
6000.016.70.00.080-01: RNCC: 5 | RNVC: 2
1345553/1: RNCC: 5 | RNVC: 9

13 Mar 2002

5340-12-159-3613
Webbing Strap

121593613
151 K-M/130MM: RNCC: 3 | RNVC: 2
151 K-M: RNCC: 5 | RNVC: 9
SCHL0SZGURT151KM: RNCC: 5 | RNVC: 9
1000006-900-00: RNCC: 5 | RNVC: 9
151 K-M/130MM: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-195-6577
Loop Clamp

121956577
DIN3016-2-G1-96X15-W5: RNCC: 2 | RNVC: 2
DIN3016-G1-96X15-W5: RNCC: 3 | RNVC: 2
SP96/15SKZ-W5: RNCC: 3 | RNVC: 2
1410700096: RNCC: 5 | RNVC: 2
SP96-15SKZ1-4571: RNCC: 5 | RNVC: 2
SP96/15SKZ-1.4571: RNCC: 5 | RNVC: 2
VG95931-G96X15-W5: RNCC: 5 | RNVC: 9
DIN3016-G1-96X15-W5: RNCC: 5 | RNVC: 9
VG95931-G96X15-1.4571: RNCC: 5 | RNVC: 9

24 Mar 1983

5340-12-172-9720
Butt Hinge Leaf

121729720
23290-185001-004: RNCC: 2 | RNVC: 2
23290-185001-004: RNCC: 5 | RNVC: 2
23290-185001.004: RNCC: 5 | RNVC: 9

9 Mar 1978

5340-12-378-0747
Loop Clamp

123780747
DIN3016-1-D1-16X12-W3-CR: RNCC: 2 | RNVC: 2
RSGU1.16/12-W3: RNCC: 3 | RNVC: 2

11 Mar 2009

5340-12-312-5729
Nonmetallic Bumper

123125729
615.06-01-02-00-014: RNCC: 3 | RNVC: 2

19 Jan 1988

5340-12-182-6858
Dust And Moisture Seal Protective Plug

121826858
500B41: RNCC: 3 | RNVC: 2
GPN500B41: RNCC: 5 | RNVC: 2
91530278: RNCC: 5 | RNVC: 2
208-09460-00: RNCC: 5 | RNVC: 2
91530278: RNCC: 5 | RNVC: 2
B41: RNCC: 5 | RNVC: 9
GPN500,B41: RNCC: 5 | RNVC: 9
500004100: RNCC: 5 | RNVC: 9
B41GPN500: RNCC: 5 | RNVC: 9

20 Feb 1980

5340-12-341-4370
Mounting Bracket

123414370
23-120-JN-65: RNCC: 3 | RNVC: 2

5 Sep 1996

5340-12-387-3539
Plain Solid Disk

123873539
A83-0004: RNCC: 3 | RNVC: 2

1 Dec 2011

5340-12-369-8643
Loop Clamp

123698643
DIN3016-1-D1-12X20-W1-2-MVQ: RNCC: 2 | RNVC: 2
06 67399 0005: RNCC: 5 | RNVC: 2
06.67399-0005: RNCC: 5 | RNVC: 2

22 Aug 2006

5340-12-328-9064
Loop Clamp

123289064
DIN71555-110,5-A4C: RNCC: 2 | RNVC: 2
DIN71555-110,5-ZN: RNCC: 5 | RNVC: 2
DIN71555-110.5-ST37.2-A3C: RNCC: 5 | RNVC: 2

1 Jul 1992

5340-12-702-5053
Retaining Strap

127025053
VG95211-ML-127025053: RNCC: 2 | RNVC: 2
5.51.6501.0804.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-345-9912
Mounting Plate

123459912
1203 1708: RNCC: 3 | RNVC: 2
12031708EE0111-90: RNCC: 5 | RNVC: 2
3.602.9.650.031.4: RNCC: 5 | RNVC: 9

27 May 1998

5340-12-384-2739
Loop Clamp

123842739
DIN3016-1-D2-8-8X15-W1-2-NBR: RNCC: 2 | RNVC: 2

9 Feb 2011

5340-12-701-3078
Rod End Connector

127013078
VG95211-ML-127013078: RNCC: 2 | RNVC: 2
5.12.5101.6490.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-344-4613
Mounting Bracket

123444613
A-244810-004: RNCC: 3 | RNVC: 2
A244810-004: RNCC: 5 | RNVC: 2

29 Oct 1997

5340-12-185-7180
Manual Control Handle

121857180
23223-011903.02.0: RNCC: 2 | RNVC: 2
23223-011903.02.0: RNCC: 5 | RNVC: 2
23223-011903-02-0: RNCC: 5 | RNVC: 2
23223-011903-02-0: RNCC: 5 | RNVC: 9

25 Oct 1980

5340-12-190-0192
Helical Compression Spring Seat

121900192
F1114072-0006: RNCC: 3 | RNVC: 2
F11.14072-0006: RNCC: 5 | RNVC: 2
F11.14072-0006: RNCC: 5 | RNVC: 2

3 Nov 1981

5340-12-358-2428
Mounting Bracket

123582428
P-876367-401: RNCC: 3 | RNVC: 2
P876367-401: RNCC: 5 | RNVC: 2

1 Oct 2002

5340-12-315-0741
Webbing Strap

123150741
5900046-4600A: RNCC: 3 | RNVC: 2
21-4600A: RNCC: 3 | RNVC: 2
5900046-4600A: RNCC: 5 | RNVC: 9
5900046-4600A: RNCC: 5 | RNVC: 9
21-4600A: RNCC: 5 | RNVC: 9
000-A3-25X2,5X3540-BW-RAL6031: RNCC: 6 | RNVC: 9

14 Sep 1988

5340-12-303-8524
Handwheel

123038524
06230-16: RNCC: 3 | RNVC: 2
NLM623-16: RNCC: 5 | RNVC: 9
NLM6230-16: RNCC: 5 | RNVC: 9

8 May 1985

5340-12-382-2760
Elastic Strap

123822760
79017/026-0720-0160: RNCC: 2 | RNVC: 2

31 May 2010

5340-12-353-8002
Access Cover

123538002
47125210601: RNCC: 3 | RNVC: 2

10 May 2001

Load More Results