What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 110 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 110 of 178

5340-12-364-5721
Mechanical Stop

123645721
T251M2001210: RNCC: 3 | RNVC: 2

12 Oct 2004

5340-12-392-6530
Snap Hook

123926530
NO PRIMARY REF 12-392-6530: RNCC: 3 | RNVC: 2
ABAKX10B: RNCC: 5 | RNVC: 2

26 Jun 2013

5340-12-369-7117
Angle Bracket

123697117
AFG045816-01: RNCC: 3 | RNVC: 2

10 Aug 2006

5340-12-353-1801
Loop Clamp

123531801
VG95211-ML-123531801: RNCC: 2 | RNVC: 2
M716056: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-12-326-9618
Double Angle Bracket

123269618
279.823 534: RNCC: 3 | RNVC: 2
1392152-350036.188: RNCC: 5 | RNVC: 9
279.823 534: RNCC: 5 | RNVC: 9

13 Nov 1991

5340-12-194-5244
Lock-Release Lever

121945244
20-5140-261: RNCC: 3 | RNVC: 2

12 Nov 1982

5340-12-370-2348
Loop Clamp

123702348
E37308-00: RNCC: 3 | RNVC: 2

10 Oct 2006

5340-12-155-2457
Turnbuckle Body

121552457
160-23450-07: RNCC: 3 | RNVC: 2
160-23450-07: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-363-8488
Double Angle Bracket

123638488
J32320324-405: RNCC: 3 | RNVC: 2

30 Jul 2004

5340-12-702-6398
Angle Bracket

127026398
VG95211-ML-127026398: RNCC: 2 | RNVC: 2
84.7215-1725: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-393-8474
Spring Tension Clip

123938474
102521: RNCC: 3 | RNVC: 2

16 Oct 2013

5340-12-347-9988
Verbindungsstueck

123479988
982 333 44: RNCC: 3 | RNVC: 2

24 Mar 1999

5340-12-307-3696
Catch Strike

123073696
366015009: RNCC: 3 | RNVC: 2
366 0150 09: RNCC: 5 | RNVC: 2
366015009: RNCC: 5 | RNVC: 9

10 Jun 1986

5340-12-307-3361
Mending Plate

123073361
42035042E5021-68: RNCC: 3 | RNVC: 2

5 Jun 1986

5340-12-365-4505
Mounting Bracket

123654505
03799210: RNCC: 3 | RNVC: 2

5 Jan 2005

5340-12-094-0841

5340-12-347-9915
Metallic Bumper

123479915
982 126 44: RNCC: 3 | RNVC: 2

23 Mar 1999

5340-12-070-1618

5340-12-179-5455
Angle Bracket

121795455
4164280140: RNCC: 3 | RNVC: 2

6 Jul 1979

5340-12-023-0952

5340-12-022-3382

5340-12-022-1475

5340-12-176-4042
Retaining Strap

121764042
LN29836B50: RNCC: 2 | RNVC: 2

27 Nov 1978

5340-12-335-8616
Access Cover

123358616
5843117: RNCC: 3 | RNVC: 2
584.2904: RNCC: 5 | RNVC: 2
584.3117: RNCC: 5 | RNVC: 2
584.3117.00: RNCC: 5 | RNVC: 2
5842904: RNCC: 5 | RNVC: 2

26 Sep 1994

5340-12-043-6556

5340-12-349-0974
Mounting Plate

123490974
8000.025-00-RH: RNCC: 3 | RNVC: 2
910478: RNCC: 5 | RNVC: 2

23 Sep 1999

5340-12-369-2597
Mounting Bracket

123692597
D0065971-001: RNCC: 3 | RNVC: 2

12 Jun 2006

5340-12-317-3482
Nonmetallic Solid Wheel

123173482
TOP125X50-20-00001133 GS: RNCC: 3 | RNVC: 2
00465-016-000: RNCC: 5 | RNVC: 2
EA078: RNCC: 5 | RNVC: 9
465-16: RNCC: 5 | RNVC: 9

30 Mar 1989

5340-12-362-0757
Mounting Plate

123620757
70-000-232: RNCC: 3 | RNVC: 2

6 Jan 2004

5340-12-319-8413
Rigid Caster

123198413
OTF-5022: RNCC: 3 | RNVC: 2
2812 075 03038: RNCC: 5 | RNVC: 2

9 Nov 1989

5340-12-153-6685

5340-12-348-6622
Mounting Bracket

123486622
1699901: RNCC: 2 | RNVC: 2
1699901: RNCC: 3 | RNVC: 2

2 Aug 1999

5340-12-359-1515
Mounting Bracket

123591515
ZG5200G424: RNCC: 3 | RNVC: 2
ZG5200G424: RNCC: 5 | RNVC: 9
ZG5200G424ST: RNCC: 5 | RNVC: 9

20 Dec 2002

5340-12-315-0101
Spring Tension Clip

123150101
2208807: RNCC: 3 | RNVC: 9

7 Sep 1988

5340-12-337-9011
Butt Hinge

123379011
64453102: RNCC: 3 | RNVC: 2
421.1299-09.3: RNCC: 5 | RNVC: 2
4453/102: RNCC: 5 | RNVC: 9

2 May 1995

5340-12-370-8960
Retaining Band

123708960
82974605040: RNCC: 3 | RNVC: 2
82.97460.5040: RNCC: 5 | RNVC: 2
82.97460-5040: RNCC: 5 | RNVC: 2

15 Jan 2007

5340-12-393-7642
Liquid Holding Unit Filler Neck

123937642
11.31027-0015: RNCC: 3 | RNVC: 2
11.31027-0015: RNCC: 5 | RNVC: 2

9 Oct 2013

5340-12-361-6343
Mounting Plate

123616343
704-121401-911-0: RNCC: 3 | RNVC: 2

28 Oct 2003

5340-12-368-7924
Access Cover

123687924
2300397-182043.000.0: RNCC: 3 | RNVC: 2
1591534: RNCC: 5 | RNVC: 9

20 Apr 2006

5340-12-318-8697
Bow Handle

123188697
702-714900-000-0: RNCC: 3 | RNVC: 2

22 Aug 1989

5340-12-306-3843
Webbing Strap

123063843
993-110512.104.0: RNCC: 3 | RNVC: 2
993-110512.104.0: RNCC: 5 | RNVC: 9
000-E3-20X2,0X230-PE-RAL6031: RNCC: 6 | RNVC: 9

25 Feb 1986

5340-12-329-5148
Helical Compression Spring Seat

123295148
1300555-500200-03-01: RNCC: 2 | RNVC: 2
VS5023T022: RNCC: 3 | RNVC: 2
VS5023T022: RNCC: 5 | RNVC: 9

26 Aug 1992

5340-12-159-8324
Dust And Moisture Seal Protective Plug

121598324
37316-000: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-193-3205
Pad Eye

121933205
5400027-2140: RNCC: 2 | RNVC: 2
813.02.01.04: RNCC: 3 | RNVC: 2
5400027-2140: RNCC: 3 | RNVC: 2
5400027-2140: RNCC: 5 | RNVC: 9
54083-215: RNCC: 5 | RNVC: 9

12 Jul 1982

5340-12-164-1510
Buckle

121641510
DIN5292-20-ST-ALMGSI-MATT: RNCC: 2 | RNVC: 2
20DIN5292-ALMGSI,MATT: RNCC: 5 | RNVC: 2
20DIN5292ALMGSIMATT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-168-5655
Helical Compression Spring Retainer

121685655
1000025-122000.04: RNCC: 2 | RNVC: 2
1000025-122000.04: RNCC: 3 | RNVC: 2
112066: RNCC: 5 | RNVC: 2
1000025-122000-04: RNCC: 5 | RNVC: 9
1000025-122000-04: RNCC: 5 | RNVC: 9
1000025-122000.04: RNCC: 5 | RNVC: 9

23 Mar 1977

5340-12-189-9263
Eye Hook

121899263
2300013-0407.00: RNCC: 2 | RNVC: 2
2300013-0407.00: RNCC: 3 | RNVC: 2
2300013-0407.00: RNCC: 5 | RNVC: 9
2300013-0407-00: RNCC: 5 | RNVC: 9
2300013-0407.00: RNCC: 5 | RNVC: 9

27 Oct 1981

5340-12-341-2038
Door Handle

123412038
3097602059: RNCC: 3 | RNVC: 2

8 Aug 1996

5340-12-190-8757
Helical Compression Spring Seat

121908757
2410320058: RNCC: 3 | RNVC: 2

21 Dec 1981

5340-12-356-1729
Loop Clamp

123561729
EN4114F15WH1: RNCC: 2 | RNVC: 2

30 Jan 2002

5340-12-172-6625
Dust And Moisture Seal Protective Cap-Plug

121726625
610U7: RNCC: 3 | RNVC: 2
1022580A00: RNCC: 5 | RNVC: 2
GPN610U7: RNCC: 5 | RNVC: 2
GPN610,U7: RNCC: 5 | RNVC: 9
U7GPN610: RNCC: 5 | RNVC: 9
U7: RNCC: 5 | RNVC: 9
610000700: RNCC: 5 | RNVC: 9

8 Feb 1978

5340-12-360-0473
Cushioning Pad

123600473
9416950589: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-196-5485
Plain Solid Disk

121965485
1007: RNCC: 3 | RNVC: 2

18 Jul 1983

5340-12-165-7281
Helical Compression Spring Seat

121657281
302K02003: RNCC: 3 | RNVC: 2

22 Jun 1976

5340-12-317-1432
Access Door

123171432
400176252: RNCC: 2 | RNVC: 2
400176252: RNCC: 3 | RNVC: 2

14 Mar 1989

5340-12-393-0075
Mounting Plate

123930075
869143702: RNCC: 3 | RNVC: 2

31 Jul 2013

5340-12-379-3914
Butt Hinge

123793914
374644: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-12-090-2142

5340-12-361-0543
Dust And Moisture Seal Protective Cap

123610543
450910-2192: RNCC: 3 | RNVC: 2

14 Aug 2003

5340-12-702-5299
Mounting Plate

127025299
VG95211-ML-127025299: RNCC: 2 | RNVC: 2
5.51.7030.0060.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-146-9106
Nut And Bolt Locking Plate

121469106
25704-190000.16.0: RNCC: 2 | RNVC: 2
25704-190000.16.0: RNCC: 3 | RNVC: 2
25704-190000-16-0: RNCC: 5 | RNVC: 2
25704-190000-16-0: RNCC: 5 | RNVC: 9
25704-190000.16.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-329-5487
Webbing Strap

123295487
01802-2-01212-FE300MM-LE1200MM: RNCC: 3 | RNVC: 2
79036/038-1500-300: RNCC: 5 | RNVC: 2
01802-2-01414-L1500MM: RNCC: 5 | RNVC: 2
DIN60060-2-25X300X1200-C1/D6: RNCC: 5 | RNVC: 9
DIN60060-2-25X300X1200-C2/D6: RNCC: 5 | RNVC: 9

28 Aug 1992

5340-12-702-5896
Mounting Bracket

127025896
VG95211-ML-127025896: RNCC: 2 | RNVC: 2
5.51.9205.0561.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-164-1509
Loop Clamp

121641509
38TAN15801-3-1364-5: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-303-3069
Retaining Strap

123033069
P-875158-001: RNCC: 3 | RNVC: 2
P875158-001: RNCC: 5 | RNVC: 2

13 Mar 1985

5340-12-339-3667
Access Cover

123393667
463-181960.000: RNCC: 3 | RNVC: 9
9894787: RNCC: 5 | RNVC: 9
463-181960.001: RNCC: 5 | RNVC: 9
9894777: RNCC: 5 | RNVC: 9

15 Nov 1995

5340-12-315-5144
Mending Plate

123155144
4616410213: RNCC: 3 | RNVC: 2
9408507800: RNCC: 5 | RNVC: 2
721 1 65 804 1: RNCC: 5 | RNVC: 9

29 Oct 1988

5340-12-358-5893
Angle Bracket

123585893
J92228174-001: RNCC: 3 | RNVC: 2

28 Oct 2002

5340-12-300-9200
Angle Bracket

123009200
1423-910.49(4): RNCC: 3 | RNVC: 2

12 Sep 1984

5340-12-301-6739
Pad Eye

123016739
4157888: RNCC: 3 | RNVC: 2
AZ358.4: RNCC: 5 | RNVC: 2

1 Nov 1984

5340-12-168-5467
Helical Compression Spring Retainer

121685467
WW415231B: RNCC: 3 | RNVC: 9
WW415231B: RNCC: 5 | RNVC: 2
WW415231B: RNCC: 5 | RNVC: 2
WW 415 231 B: RNCC: 5 | RNVC: 2
WW 415 231 B: RNCC: 5 | RNVC: 9

18 Mar 1977

5340-12-168-5779
Angle Bracket

121685779
WW422066A: RNCC: 3 | RNVC: 2
WW422066A: RNCC: 5 | RNVC: 2
WW 422 066 A: RNCC: 5 | RNVC: 2
WW422066A: RNCC: 5 | RNVC: 2

23 Mar 1977

5340-12-701-5723
Mounting Plate

127015723
5.12.6149.0300.25: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-300-8724
Spring Loaded Cylinder Fastener

123008724
1423-948.34(4): RNCC: 3 | RNVC: 2

6 Sep 1984

5340-12-168-1262
Dust And Moisture Seal Protective Plug

121681262
LN29843M14X1-5: RNCC: 2 | RNVC: 2

18 Feb 1977

5340-12-322-3273
Mending Plate

123223273
65.7059.600.01A001: RNCC: 3 | RNVC: 2
65-7059-600-01A001: RNCC: 5 | RNVC: 2

10 Aug 1990

5340-12-363-1278
Mounting Bracket

123631278
160-27203-03: RNCC: 3 | RNVC: 2
160-27203.03: RNCC: 5 | RNVC: 2

6 May 2004

5340-12-176-4528
Butt Hinge Leaf

121764528
81658010045: RNCC: 3 | RNVC: 2
81.65801-0045: RNCC: 5 | RNVC: 2
00009052017: RNCC: 5 | RNVC: 2

29 Nov 1978

5340-12-332-1481
Mounting Bracket

123321481
480-7347-12-16-00: RNCC: 3 | RNVC: 2
480/7347-12-16-00: RNCC: 5 | RNVC: 2

22 Jul 1993

5340-12-368-7339
Access Cover

123687339
313356: RNCC: 3 | RNVC: 2
0855-02-15-00/37: RNCC: 5 | RNVC: 2

11 Apr 2006

5340-12-325-6807
Double Angle Bracket

123256807
4000000-02542: RNCC: 3 | RNVC: 2

28 Jun 1991

5340-12-334-5269
Mounting Bracket

123345269
6555450840: RNCC: 3 | RNVC: 2

19 May 1994

5340-12-310-5322
Catch Strike

123105322
78203 46402: RNCC: 2 | RNVC: 2
7820346402: RNCC: 3 | RNVC: 2
78203 46402: RNCC: 5 | RNVC: 9

29 May 1987

5340-12-325-2067
Permanent Magnet

123252067
1504: RNCC: 3 | RNVC: 2

16 May 1991

5340-12-333-6358
Loop Clamp

123336358
52.0271.936.00: RNCC: 3 | RNVC: 2
53.0271.930.03: RNCC: 5 | RNVC: 2

17 Jan 1994

5340-12-175-0085
Mending Plate

121750085
4354261240: RNCC: 3 | RNVC: 2

16 Aug 1978

5340-12-022-6050

5340-12-365-0519
Spacing Threaded Standoff

123650519
5160-550000B03B: RNCC: 2 | RNVC: 2
5160-550000B03B: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-12-094-9188
Shim

120949188
FHG385A: RNCC: 3 | RNVC: 9

1 Apr 1981

5340-12-313-2386
Cane Bolt

123132386
42038760: RNCC: 3 | RNVC: 2
42038760KZ5015-85: RNCC: 5 | RNVC: 2

12 Mar 1988

5340-12-321-1020
Mounting Bracket

123211020
5802106-661100.00: RNCC: 2 | RNVC: 2
5802106-661100.00: RNCC: 5 | RNVC: 9

27 Mar 1990

5340-12-094-9740

5340-12-340-5466
Mounting Bracket

123405466
5901803440: RNCC: 3 | RNVC: 2
5901803440: RNCC: 5 | RNVC: 2
5901803440: RNCC: 5 | RNVC: 2
590 180 34 40: RNCC: 5 | RNVC: 2

30 Apr 1996

5340-12-386-4366
Section Block Clamp

123864366
5699950068: RNCC: 3 | RNVC: 2

1 Sep 2011

5340-12-358-6862
Plug Button

123586862
6555250038: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-12-176-4917
Butt Hinge Leaf

121764917
WW 306 063 BR: RNCC: 2 | RNVC: 2
WW 306 063 BR: RNCC: 3 | RNVC: 9
WW 306 063 AR: RNCC: 5 | RNVC: 2
WW 306 063 BR: RNCC: 5 | RNVC: 2
WW306063AR: RNCC: 5 | RNVC: 2
WW 306 063 AR: RNCC: 5 | RNVC: 9
WW306063AR: RNCC: 5 | RNVC: 9

30 Nov 1978

5340-12-303-9823
Spring Tension Clip

123039823
191853733: RNCC: 3 | RNVC: 9

28 May 1985

5340-12-301-1408
Rubber Bumper

123011408
251843314: RNCC: 3 | RNVC: 9

22 Sep 1984

5340-12-302-7927
Mending Plate

123027927
2300088-510501.02: RNCC: 2 | RNVC: 2
2300088-510501.02: RNCC: 3 | RNVC: 2

30 Jan 1985

5340-12-305-5191
Door Button

123055191
81669125049: RNCC: 3 | RNVC: 2
81.66912.5049: RNCC: 5 | RNVC: 2

18 Nov 1985

5340-12-022-1498

5340-12-381-9882
Handwheel

123819882
57115: RNCC: 3 | RNVC: 2

26 Apr 2010

5340-12-302-7617
Metal Runner

123027617
2540101: RNCC: 3 | RNVC: 2

29 Jan 1985

5340-12-327-8260
Angle Bracket

123278260
4608603514: RNCC: 3 | RNVC: 2

10 Mar 1992

5340-12-183-5830
Flush Catch Claw

121835830
C100ZZ10014-000: RNCC: 3 | RNVC: 2

3 May 1980

5340-12-163-9805
Rigid Caster

121639805
2500006-2500: RNCC: 2 | RNVC: 2
2500006-2500: RNCC: 3 | RNVC: 2
TK6092-2500: RNCC: 3 | RNVC: 2
2500006-2500: RNCC: 5 | RNVC: 9
2500006-2500: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-164-4028
Angle Bracket

121644028
23290-121061: RNCC: 2 | RNVC: 2
23290-121061: RNCC: 3 | RNVC: 2
23290-121061: RNCC: 5 | RNVC: 9
23290-121061: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-353-7182
Angle Bracket

123537182
J92224239-002: RNCC: 3 | RNVC: 2

2 May 2001

5340-12-195-9860
Helical Compression Spring Seat

121959860
23303-150400.03: RNCC: 2 | RNVC: 2
619-54.00.113-02: RNCC: 3 | RNVC: 2
619-54-00-113-02: RNCC: 5 | RNVC: 2
23303-150400-03: RNCC: 5 | RNVC: 9

13 May 1983

5340-12-344-8807
Access Cover

123448807
U15.144000.01-00: RNCC: 3 | RNVC: 2

7 Jan 1998

5340-12-364-4646
Dust And Moisture Seal Protective Plug

123644646
710R3/4": RNCC: 3 | RNVC: 2
0039910750: RNCC: 5 | RNVC: 2

29 Sep 2004

5340-12-337-3645
Mounting Bracket

123373645
81669125163: RNCC: 3 | RNVC: 2
81.66912,5163: RNCC: 5 | RNVC: 2

21 Feb 1995

5340-12-390-8563
Access Cover

123908563
F2567044412600: RNCC: 3 | RNVC: 2

20 Dec 2012

5340-12-343-5532
Mounting Bracket

123435532
56011500030: RNCC: 3 | RNVC: 2
F300 0T 022 5262: RNCC: 6 | RNVC: 9

2 Jul 1997

5340-12-392-6750
Dust And Moisture Seal Protective Cap-Plug

123926750
GPN610U4-RAL3000: RNCC: 3 | RNVC: 2
610U4RAL3000: RNCC: 5 | RNVC: 2
610U4RAL3000: RNCC: 5 | RNVC: 2
9789400040: RNCC: 5 | RNVC: 2

27 Jun 2013

5340-12-129-4949
Retaining Strap

121294949
4046260091: RNCC: 3 | RNVC: 2
654041130200: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-197-2221
Double Angle Bracket

121972221
075-103022-430: RNCC: 3 | RNVC: 2

3 Oct 1983

5340-12-375-0530
Filler Opening Cap

123750530
182501002: RNCC: 3 | RNVC: 2

17 Apr 2008

5340-12-389-2741
Helical Compression Spring Retainer

123892741
195-41: RNCC: 3 | RNVC: 2

15 Jun 2012

5340-12-365-3401
Retaining Strap

123653401
770 614 016: RNCC: 3 | RNVC: 2

21 Dec 2004

5340-12-176-9280
Catch Strike

121769280
4217230303: RNCC: 3 | RNVC: 2
4217230303: RNCC: 5 | RNVC: 2

27 Dec 1978

5340-12-174-0921
Loop Clamp

121740921
81929010074: RNCC: 3 | RNVC: 2

6 Jun 1978

5340-12-362-7347
Angle Bracket

123627347
S533M6034212: RNCC: 3 | RNVC: 2

25 Mar 2004

5340-12-197-0131
Webbing Strap

121970131
01151-1-GLATT-FE700MM- ABGESCHRA: RNCC: 3 | RNVC: 2
79057-700: RNCC: 3 | RNVC: 2
4900059-212072.000.0: RNCC: 3 | RNVC: 2
01151-1-700MM: RNCC: 5 | RNVC: 2
4900059-212072-000-0: RNCC: 5 | RNVC: 2
4900059-212072-000.0: RNCC: 5 | RNVC: 2
DIN60060-1-25X700-C3: RNCC: 5 | RNVC: 9

12 Sep 1983

5340-12-164-0223
Clamp Bolt Assembly

121640223
90-125-2166-04: RNCC: 3 | RNVC: 2
90-125-2215: RNCC: 5 | RNVC: 2
90-125-2166-04SOMS: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-176-2595
Dust And Moisture Seal Protective Cap

121762595
906.644: RNCC: 3 | RNVC: 2
906-644: RNCC: 5 | RNVC: 2
906644: RNCC: 5 | RNVC: 2
211955275A: RNCC: 5 | RNVC: 2
0008242499: RNCC: 5 | RNVC: 2

23 Nov 1978

5340-12-324-7221
Metal Runner

123247221
870/001-127: RNCC: 3 | RNVC: 2

19 Mar 1991

5340-12-702-2338
Rod End Connector

127022338
VG95211-ML-127022338: RNCC: 2 | RNVC: 2
30.7702.01: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-314-2167
Angle Bracket

123142167
512214-0418.000: RNCC: 3 | RNVC: 2
512214-0418: RNCC: 5 | RNVC: 2

17 Jun 1988

5340-12-198-4430
Metal Runner

121984430
5801659-0000.09: RNCC: 2 | RNVC: 2
5801659-0000.09: RNCC: 3 | RNVC: 2
5801659-0000-09: RNCC: 5 | RNVC: 2
5801659-0000.09: RNCC: 5 | RNVC: 9

27 Jan 1984

5340-12-353-4244
Angle Bracket

123534244
3100-300: RNCC: 3 | RNVC: 2

22 Mar 2001

5340-12-191-6040
Mending Plate

121916040
23111-1801.03: RNCC: 1 | RNVC: 2
1064470: RNCC: 3 | RNVC: 2
23111-1801.03: RNCC: 3 | RNVC: 2
23111-1801-03: RNCC: 5 | RNVC: 9
23111-1801.03: RNCC: 5 | RNVC: 9
23111-1801.03: RNCC: 5 | RNVC: 9
23111-1801-03: RNCC: 5 | RNVC: 9
23111-1801.03: RNCC: 5 | RNVC: 9
1064470: RNCC: 5 | RNVC: 9

15 Feb 1982

5340-12-324-6974
Spring Loaded Cylinder Fastener

123246974
BK SG8/14-ZN8-LACKIERT-RAL6031F9: RNCC: 3 | RNVC: 2
139000236: RNCC: 5 | RNVC: 2
SG8/14-ZN8-LACKIERT-RAL6031F9: RNCC: 5 | RNVC: 9
SG814-VERZINKT UND LACKIERT-6031: RNCC: 5 | RNVC: 9

18 Mar 1991

5340-12-336-0429
Multiple Angle Bracket

123360429
160-89028-02: RNCC: 3 | RNVC: 2
160-89028-02: RNCC: 5 | RNVC: 9

14 Oct 1994

5340-12-172-4433
Folding Stay

121724433
NO PRIMARY REF 12-172-4433: RNCC: 3 | RNVC: 2
1.6899-15-3.7405TEIL 1: RNCC: 5 | RNVC: 9
15-1-6988-1: RNCC: 5 | RNVC: 9
15-3.7405 TEIL 1: RNCC: 5 | RNVC: 9

19 Jan 1978

5340-12-168-8281
Tee Hinge

121688281
1918-141603-009: RNCC: 3 | RNVC: 2
1918-141603-009: RNCC: 5 | RNVC: 9
1918-141603.009: RNCC: 5 | RNVC: 9

13 Apr 1977

5340-12-185-9173
Plain Solid Disk

121859173
5800358-111100-05: RNCC: 3 | RNVC: 2
5800358-111100-05: RNCC: 5 | RNVC: 9
5800358-111100.05: RNCC: 5 | RNVC: 9
5800358-111100-05: RNCC: 5 | RNVC: 9

8 Nov 1980

5340-12-701-9972
Loop Clamp

127019972
VG95211-ML-127019972: RNCC: 2 | RNVC: 2
155N464-728: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-161-2170
Loop Clamp

121612170
LN29849-10: RNCC: 2 | RNVC: 2
10LN29849: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-305-0509
Angle Bracket

123050509
5801759-201000.000: RNCC: 2 | RNVC: 2
5801759-201000.000: RNCC: 3 | RNVC: 2
5801759-201000.000: RNCC: 5 | RNVC: 9

20 Sep 1985

5340-12-702-2244
Mounting Bracket

127022244
VG95211-ML-127022244: RNCC: 2 | RNVC: 2
30.7602.30: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-123-2593
Rod End Clevis

121232593
03431048: RNCC: 3 | RNVC: 2
3431048KZ5056-55: RNCC: 5 | RNVC: 2
D5166-55-81-40: RNCC: 5 | RNVC: 2
2440979UD5056-55: RNCC: 5 | RNVC: 2
3431048: RNCC: 5 | RNVC: 2
5166-55-81.40: RNCC: 5 | RNVC: 9
5166-55-81-40: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-129-1822
Retaining Strap

121291822
30381906000000: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-341-9681
Lock-Release Lever

123419681
CF 469 485 AE: RNCC: 2 | RNVC: 2
CF 469 485 AE: RNCC: 3 | RNVC: 2

22 Nov 1996

5340-12-308-7119
Electrical-Mechanical Equipment Post

123087119
2725252: RNCC: 3 | RNVC: 2

10 Nov 1986

5340-12-360-7073
Dust And Moisture Seal Protective Cap

123607073
1000007200140: RNCC: 3 | RNVC: 2

1 Jul 2003

5340-12-308-9514
Electrical-Mechanical Equipment Post

123089514
M462220: RNCC: 3 | RNVC: 9
M462220: RNCC: 5 | RNVC: 2

1 Dec 1986

5340-12-022-9431

5340-12-125-2359

5340-12-181-1889
Electrical-Mechanical Equipment Post

121811889
C107-A103-C19: RNCC: 2 | RNVC: 2
VG95148B6XM3X52-NRST: RNCC: 2 | RNVC: 2
VG95148B6XM3X52-NRST: RNCC: 3 | RNVC: 2
C107A103C19: RNCC: 3 | RNVC: 2
C107-A103-C19: RNCC: 3 | RNVC: 2
C107-A103-C19: RNCC: 5 | RNVC: 2
C107A103C19: RNCC: 5 | RNVC: 2

31 Oct 1979

5340-12-191-2534
Clamping Catch

121912534
VG95528B140ST: RNCC: 2 | RNVC: 2
VG95528B140ST: RNCC: 3 | RNVC: 2
2803: RNCC: 3 | RNVC: 2
VG95528-B140ST: RNCC: 5 | RNVC: 2
571341577: RNCC: 5 | RNVC: 2

20 Jan 1982

5340-12-320-4621
Mounting Plate

123204621
5803606-203110.00: RNCC: 2 | RNVC: 2
5803606-203110.00: RNCC: 5 | RNVC: 9

17 Jan 1990

5340-12-333-3447
Mending Plate

123333447
NO PRIMARY REF 12-333-3447: RNCC: 3 | RNVC: 2
21-4130: RNCC: 5 | RNVC: 9

3 Dec 1993

5340-12-197-5240
Bridge Clamp

121975240
CF 478 149 AU: RNCC: 3 | RNVC: 2
CF 478 149 -U: RNCC: 5 | RNVC: 2
CF 478 149 AU: RNCC: 5 | RNVC: 2
CF 478 149 -U: RNCC: 5 | RNVC: 2

28 Oct 1983

5340-12-192-4045
Electrical-Mechanical Equipment Post

121924045
VG95148B5,5XM3X16-AL: RNCC: 2 | RNVC: 2
MB033.2231: RNCC: 3 | RNVC: 2
VG95148B5,5XM3X16-AL: RNCC: 3 | RNVC: 2
MB0332231: RNCC: 5 | RNVC: 2
ZXD11021/16: RNCC: 5 | RNVC: 2

21 Apr 1982

5340-12-189-1811
Webbing Strap

121891811
42405837KZ7101-75: RNCC: 3 | RNVC: 2
16 100 0922: RNCC: 5 | RNVC: 2
42405838: RNCC: 5 | RNVC: 2
42405838UD7101-75: RNCC: 5 | RNVC: 2
42405837: RNCC: 5 | RNVC: 2
42405837KZ7101-75: RNCC: 5 | RNVC: 9
42405838: RNCC: 5 | RNVC: 9
42405838UD7101-75: RNCC: 5 | RNVC: 9
42405837: RNCC: 5 | RNVC: 9
000-A3-25X2,5X720-BW-RAL6031: RNCC: 6 | RNVC: 9

8 Sep 1981

5340-12-339-2899
Access Cover

123392899
305412-01: RNCC: 3 | RNVC: 2
2100021: RNCC: 5 | RNVC: 2

6 Nov 1995

5340-12-173-0767
Loop Clamp

121730767
H16P: RNCC: 3 | RNVC: 2
5800583-096190-076: RNCC: 5 | RNVC: 2
5800583-096190.076: RNCC: 5 | RNVC: 2
C47195-Z13-C34: RNCC: 5 | RNVC: 2
C47195Z13C34: RNCC: 5 | RNVC: 2
5N.3821.022.06: RNCC: 5 | RNVC: 2
211-60169: RNCC: 5 | RNVC: 2
C195-Z3-C20: RNCC: 5 | RNVC: 2
203016102: RNCC: 5 | RNVC: 9

20 Mar 1978

5340-12-184-9317
Mending Plate

121849317
38031-200.05: RNCC: 2 | RNVC: 2
38031-200-05: RNCC: 5 | RNVC: 9

28 Aug 1980

5340-12-315-5295
Angle Bracket

123155295
5803471-201310.10: RNCC: 2 | RNVC: 2
65.7789.421.10-A001: RNCC: 3 | RNVC: 2

3 Nov 1988

5340-12-325-7585
Schlosz Schluessel

123257585
SCHLUESSEL 4010LI-BC0131: RNCC: 3 | RNVC: 2
BC0131: RNCC: 5 | RNVC: 9

5 Jul 1991

5340-12-306-7353
Mending Plate

123067353
5801758-2910.00: RNCC: 2 | RNVC: 2
5801758-2910.00: RNCC: 3 | RNVC: 2
5801758-2910.00: RNCC: 5 | RNVC: 9

25 Mar 1986

5340-12-328-9082
Loop Clamp

123289082
2653-090340.00: RNCC: 2 | RNVC: 2
2653-090340.00: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-12-328-9268
Loop Clamp

123289268
2300354-949931: RNCC: 2 | RNVC: 2
07655-730010-00: RNCC: 5 | RNVC: 9

1 Jul 1992

5340-12-184-2998
Mounting Plate

121842998
5801357-1200.15D: RNCC: 2 | RNVC: 2
5801357-1200.15D: RNCC: 3 | RNVC: 2
5801357-1200-15D: RNCC: 5 | RNVC: 2
5801357-1200-15D: RNCC: 5 | RNVC: 9
5801357-1200-15D: RNCC: 5 | RNVC: 9

15 Jul 1980

5340-12-306-6047
Butt Hinge Leaf

123066047
28.04.201-010.21: RNCC: 3 | RNVC: 2
284-201-010-210: RNCC: 5 | RNVC: 2

14 Mar 1986

5340-12-360-4732
Anschlagecke

123604732
82-0970: RNCC: 3 | RNVC: 2

23 May 2003

5340-12-324-4385
Mounting Bracket

123244385
1890597-10220.00: RNCC: 3 | RNVC: 2

15 Feb 1991

5340-12-091-8674

5340-12-180-0566
Webbing Strap

121800566
3818900294: RNCC: 3 | RNVC: 2

17 Aug 1979

5340-12-369-6896
Block Clamp

123696896
RAP010X: RNCC: 3 | RNVC: 2
1103236: RNCC: 5 | RNVC: 2
RAP010X: RNCC: 5 | RNVC: 2
15009135: RNCC: 5 | RNVC: 2

9 Aug 2006

5340-12-376-8584
Block Clamp

123768584
3500458-512: RNCC: 3 | RNVC: 2
3500458-512: RNCC: 5 | RNVC: 9

13 Nov 2008

5340-12-376-9125
Dust And Moisture Seal Protective Plug

123769125
735084055000: RNCC: 3 | RNVC: 2
55MTN5084: RNCC: 5 | RNVC: 2

21 Nov 2008

5340-12-359-8611
Metallic Bumper

123598611
H95-216-110-150-4FF: RNCC: 3 | RNVC: 2

17 Mar 2003

5340-12-313-0203
Double Angle Bracket

123130203
P-086149-027: RNCC: 3 | RNVC: 2
P086149-027: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-362-6909
Mounting Bracket

123626909
0A807.41-01-01-01-002: RNCC: 3 | RNVC: 2

19 Mar 2004

5340-12-301-1644
Angle Bracket

123011644
A-243799-065: RNCC: 3 | RNVC: 2
A243799-065: RNCC: 5 | RNVC: 2

25 Sep 1984

5340-12-342-5927
Resilient Mount

123425927
01907808: RNCC: 3 | RNVC: 2
1907808: RNCC: 5 | RNVC: 2
1907808EY5042-38: RNCC: 5 | RNVC: 2

4 Mar 1997

5340-12-348-2104
Access Cover

123482104
400428: RNCC: 3 | RNVC: 2
1211-133: RNCC: 5 | RNVC: 2
1211-133: RNCC: 5 | RNVC: 2

6 May 1999

5340-12-136-7712
Loop Clamp

121367712
4042330041: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-315-0497
Control Rod

123150497
303564: RNCC: 3 | RNVC: 2
303564E87608: RNCC: 5 | RNVC: 2

9 Sep 1988

5340-12-371-1974
Dust And Moisture Seal Protective Cap

123711974
YJ3800200 NBR 70: RNCC: 3 | RNVC: 2

27 Feb 2007

5340-12-343-7816
Resilient Mount

123437816
1802230212: RNCC: 3 | RNVC: 2

28 Jul 1997

5340-12-350-6154
Retaining Strap

123506154
111P10002: RNCC: 3 | RNVC: 2

20 Apr 2000

5340-12-361-7967
Mounting Bracket

123617967
23111-4163.00: RNCC: 2 | RNVC: 2
23111-4163.00: RNCC: 3 | RNVC: 2

19 Nov 2003

5340-12-348-5695
Mounting Bracket

123485695
818 781 44: RNCC: 3 | RNVC: 2

20 Jul 1999

5340-12-161-9831

5340-12-311-6110

5340-12-157-9487
Hinge Torsion Bar

121579487
601A639: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-312-2565
Dust And Moisture Seal Protective Plug

123122565
51960020028: RNCC: 3 | RNVC: 2
51.96002.0028: RNCC: 5 | RNVC: 2
SRL34: RNCC: 5 | RNVC: 9

9 Dec 1987

5340-12-315-1895
Mounting Bracket

123151895
6212850040: RNCC: 3 | RNVC: 2
621 285 00 40: RNCC: 5 | RNVC: 2

28 Sep 1988

5340-12-130-1175

5340-12-378-0857
Access Cover

123780857
5554685: RNCC: 3 | RNVC: 2

11 Mar 2009

5340-12-136-3330
Retaining Strap

121363330
114A61019E1: RNCC: 3 | RNVC: 2
8399951210: RNCC: 5 | RNVC: 2
114A61019: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-370-3768
Loop Clamp

123703768
131-11420: RNCC: 3 | RNVC: 2
RT140: RNCC: 5 | RNVC: 2

31 Oct 2006

5340-12-179-2501
Webbing Strap

121792501
42117-30: RNCC: 2 | RNVC: 2
42117-30: RNCC: 5 | RNVC: 9

18 Jun 1979

5340-12-342-0704
Angle Bracket

123420704
1052-0108: RNCC: 3 | RNVC: 2
077681550: RNCC: 5 | RNVC: 2

6 Dec 1996

5340-12-355-2415
Retaining Strap

123552415
5803937-010: RNCC: 2 | RNVC: 2
5803937-010: RNCC: 3 | RNVC: 2

25 Oct 2001

5340-12-345-4807
Flush Catch Claw

123454807
TL-40-205-52: RNCC: 3 | RNVC: 2
TL802DB1: RNCC: 5 | RNVC: 9

24 Mar 1998

5340-12-312-1326
Door Handle

123121326
81.62641.6037: RNCC: 3 | RNVC: 2
281837205F: RNCC: 3 | RNVC: 2
81626416037: RNCC: 5 | RNVC: 2

25 Nov 1987

5340-12-361-4898
Access Cover

123614898
64415462: RNCC: 3 | RNVC: 2

8 Oct 2003

5340-12-366-6635
Loop Clamp

123666635
DIN3567-A115: RNCC: 2 | RNVC: 2

20 May 2005

5340-12-186-8372
Retaining Strap

121868372
2300109-034300.004.0: RNCC: 2 | RNVC: 2
2300109-034300.004.0: RNCC: 3 | RNVC: 2
2300109-034300.004.0: RNCC: 3 | RNVC: 2
2300109-034300-004-0: RNCC: 5 | RNVC: 9
2300109-034300-004-0: RNCC: 5 | RNVC: 9
2300109-034300.004.0: RNCC: 5 | RNVC: 9
2300109-034300-004-0: RNCC: 5 | RNVC: 9

11 Feb 1981

5340-12-179-5144
Resilient Mount

121795144
C247-A10-C34: RNCC: 2 | RNVC: 2
DIN95363-B25X15-NR55ST-M6X10: RNCC: 2 | RNVC: 2
1.25.15.3.55NR/ST-M6X10: RNCC: 5 | RNVC: 2
C247A10C34: RNCC: 5 | RNVC: 2
C247-A10-C34: RNCC: 5 | RNVC: 2
C247A10C34: RNCC: 5 | RNVC: 2
811.010.025.015.06X10.NR55.ST: RNCC: 5 | RNVC: 2
81110-25X15-M6X10.NR55.ST: RNCC: 5 | RNVC: 2
C247-A10-C34: RNCC: 5 | RNVC: 2
VG95363-B25X15-M6X10-NR55ST: RNCC: 5 | RNVC: 9

4 Jul 1979

5340-12-197-7675
Angle Bracket

121977675
A-145401-030: RNCC: 3 | RNVC: 2
A145401-030: RNCC: 5 | RNVC: 2

22 Nov 1983

5340-12-701-7628
Mounting Bracket

127017628
VG95211-ML-127017628: RNCC: 2 | RNVC: 2
5.12.7701.2630.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-178-6178
Angle Bracket

121786178
81974860329: RNCC: 3 | RNVC: 2
23230-120609-029-0: RNCC: 5 | RNVC: 9
23230-120609.029.0: RNCC: 5 | RNVC: 9

7 May 1979

5340-12-701-5973
Mounting Bracket

127015973
VG95211-ML-127015973: RNCC: 2 | RNVC: 2
5.12.6501.1890.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-5559
Mounting Bracket

127015559
VG95211-ML-127015559: RNCC: 2 | RNVC: 2
5.12.6113.1500.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-4005
Mounting Plate

127024005
VG95211-ML-127024005: RNCC: 2 | RNVC: 2
5.12.5313.1330.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-311-8092
Dust And Moisture Seal Protective Plug

123118092
960/1386: RNCC: 3 | RNVC: 2
6.368-111.0: RNCC: 5 | RNVC: 2
GPN960/1386: RNCC: 5 | RNVC: 2
6.368-111: RNCC: 5 | RNVC: 9

19 Oct 1987

5340-12-196-9840
Mending Plate

121969840
4900059-323444.000.0: RNCC: 3 | RNVC: 2
4900059-323444-000-0: RNCC: 5 | RNVC: 2

7 Sep 1983

5340-12-334-3877
Butt Hinge

123343877
DIN7956-32X0,7-30-NRST: RNCC: 2 | RNVC: 2
A32DIN7956-NRST: RNCC: 5 | RNVC: 2

3 May 1994

5340-12-356-8449
Angle Bracket

123568449
ED88-0100-01001-119: RNCC: 3 | RNVC: 2

10 Apr 2002

5340-12-333-2385
Spacing Threaded Standoff

123332385
26-21C1358G001P29: RNCC: 3 | RNVC: 2
26-21C1358G001-P29: RNCC: 5 | RNVC: 2

12 Nov 1993

5340-12-174-2651
Handwheel

121742651
7882324: RNCC: 3 | RNVC: 2
1000025-541950-01: RNCC: 5 | RNVC: 2
7882-324: RNCC: 5 | RNVC: 2
1000025-541000-33: RNCC: 5 | RNVC: 9
1000025-541000.33: RNCC: 5 | RNVC: 9

19 Jun 1978

5340-12-190-2118
Access Cover

121902118
7882822: RNCC: 3 | RNVC: 2
7882-822: RNCC: 5 | RNVC: 2
1000025-591000.08: RNCC: 5 | RNVC: 9

12 Nov 1981

5340-12-177-7732
Dust And Moisture Seal Protective Cap

121777732
980/0101: RNCC: 3 | RNVC: 2
9800101: RNCC: 5 | RNVC: 2
980010100: RNCC: 5 | RNVC: 2
81.96410-0312: RNCC: 5 | RNVC: 2
81964100312: RNCC: 5 | RNVC: 2
980/101: RNCC: 5 | RNVC: 9
GPN980-A0101: RNCC: 5 | RNVC: 9
GPN980/0101: RNCC: 5 | RNVC: 9

19 Feb 1979

5340-12-337-3375
Loop Clamp

123373375
DIN3016-1-A1-32X15-BZ: RNCC: 2 | RNVC: 2
DIN3016-A1-32X14-BRONZE: RNCC: 3 | RNVC: 2
RS1.32/15-BZ: RNCC: 3 | RNVC: 2
RS1-32/15-BZ: RNCC: 5 | RNVC: 2
RS1.32/15-BRONZE: RNCC: 5 | RNVC: 2
RS1100.32/15 BRONZE: RNCC: 5 | RNVC: 2
RS 1.32/15-BZ: RNCC: 5 | RNVC: 2
MR200(A0)6598 ITEM 54: RNCC: 5 | RNVC: 2
MR200(A0)6598/54: RNCC: 5 | RNVC: 2
DIN3016-A1-32X15-BZ: RNCC: 5 | RNVC: 9

16 Feb 1995

5340-12-343-1044
Loop Clamp

123431044
H16TAN15802-0: RNCC: 3 | RNVC: 2
H16TAN15802-3-13645: RNCC: 5 | RNVC: 2
H16TAN15802-3.1364.5: RNCC: 5 | RNVC: 2
H16TAN15802-O: RNCC: 5 | RNVC: 2

29 Apr 1997

5340-12-376-7094
Retaining Strap

123767094
197-1571: RNCC: 3 | RNVC: 2
PCH-5254: RNCC: 5 | RNVC: 2

30 Oct 2008

5340-12-148-9183
Loop Clamp

121489183
DIN3016-1-D2-7-9X15-W1-2-CR: RNCC: 2 | RNVC: 2
RSGU1.7-9/15: RNCC: 3 | RNVC: 2
DIN3016-D2-7-9X15-W1-2: RNCC: 3 | RNVC: 2
4219100007: RNCC: 5 | RNVC: 2
RSGU1100-7-9-15: RNCC: 5 | RNVC: 2
RSGU1100.7-9/15: RNCC: 5 | RNVC: 2
23176-060000-48-0: RNCC: 5 | RNVC: 2
DIN3016-D2-7-9X15-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-199-3146
Case Corner

121993146
2500082-198410.00.0: RNCC: 3 | RNVC: 2
2500082-198410-00-0: RNCC: 5 | RNVC: 2

11 Apr 1984

5340-12-372-9267
Protection Bellows

123729267
NO PRIMARY REF 12-372-9267: RNCC: 3 | RNVC: 2
7085524: RNCC: 5 | RNVC: 2

7 Sep 2007

5340-12-701-6981
Angle Bracket

127016981
VG95211-ML-127016981: RNCC: 2 | RNVC: 2
5.12.7226.2000.06: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-309-8948
Electrical-Mechanical Equipment Post

123098948
0C846.91-10-23-00-005: RNCC: 3 | RNVC: 2

16 Mar 1987

5340-12-326-4287
Flare Lock Fastener

123264287
212-04.0002: RNCC: 3 | RNVC: 2
990 00 58 0269: RNCC: 5 | RNVC: 9
990.00.58.0269: RNCC: 5 | RNVC: 9

13 Sep 1991

5340-12-372-9410
Mounting Bracket

123729410
NO PRIMARY REF 12-372-9410: RNCC: 3 | RNVC: 2
7092151: RNCC: 5 | RNVC: 2

10 Sep 2007

5340-12-171-4861
Clamping Catch

121714861
23111-7272.00: RNCC: 2 | RNVC: 2
23111-7272.00: RNCC: 3 | RNVC: 2
23111-7272-00: RNCC: 5 | RNVC: 2
23111-7272-00: RNCC: 5 | RNVC: 9
23111-7272-00: RNCC: 5 | RNVC: 9
23111-7272.00: RNCC: 5 | RNVC: 9

20 Oct 1977

5340-12-374-8845
Multiple Angle Bracket

123748845
453 6472-001: RNCC: 3 | RNVC: 2
453 6472-001: RNCC: 5 | RNVC: 2

3 Apr 2008

5340-12-384-1411
Manual Control Handle

123841411
27.15.07: RNCC: 3 | RNVC: 2

26 Jan 2011

5340-12-393-8061
Cushioning Pad Set

123938061
H27073: RNCC: 3 | RNVC: 2

14 Oct 2013

5340-12-373-4145
Dust And Moisture Seal Protective Cover

123734145
000802: RNCC: 3 | RNVC: 2

30 Oct 2007

5340-12-394-5396
Genera Guide Rail

123945396
4052063134549: RNCC: 3 | RNVC: 2
I012931: RNCC: 5 | RNVC: 2

11 Dec 2013

5340-12-337-9647
Helical Compression Spring Seat

123379647
7059701: RNCC: 3 | RNVC: 2
EZ70597: RNCC: 5 | RNVC: 2

5 May 1995

5340-12-378-9227
Retaining Strap

123789227
L853M4851205: RNCC: 3 | RNVC: 2

29 May 2009

5340-12-316-4495
Angle Bracket

123164495
P-050761-021: RNCC: 3 | RNVC: 2
P050761-021: RNCC: 5 | RNVC: 2

18 Jan 1989

5340-12-190-3161
Retaining Strap

121903161
47-1156-000400.003.0: RNCC: 2 | RNVC: 2
47-1156-000400.003.0: RNCC: 3 | RNVC: 2
47-1156-000400-003-0: RNCC: 5 | RNVC: 2

19 Nov 1981

5340-12-305-9922
Mending Plate

123059922
5801761-000000.005: RNCC: 2 | RNVC: 2
5801761-000000.005: RNCC: 3 | RNVC: 2

17 Jan 1986

5340-12-392-3236
Friction Catch

123923236
07560-01: RNCC: 3 | RNVC: 2

27 May 2013

5340-12-319-9080
Clamp Bolt Assembly

123199080
C42300-A142-B1: RNCC: 3 | RNVC: 2

16 Nov 1989

5340-12-199-6706
Nonmetallic Bumper

121996706
02469902: RNCC: 3 | RNVC: 2
2469902ED5019-19: RNCC: 5 | RNVC: 2
246-9902ED5019-19: RNCC: 5 | RNVC: 9

19 May 1984

5340-12-357-9031
Manual Control Lever

123579031
E31637-00: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-12-367-2153
Fuehrungs- Schiene

123672153
R05375-001: RNCC: 3 | RNVC: 2

21 Jul 2005

5340-12-702-6323
Angle Bracket

127026323
VG95211-ML-127026323: RNCC: 2 | RNVC: 2
84-6100-130: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-123-2200
Retaining Strap

121232200
03341594: RNCC: 3 | RNVC: 2
K16535: RNCC: 5 | RNVC: 2
3341594EF5093-29: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-376-7575
Bumper

123767575
D25X28D90/01: RNCC: 3 | RNVC: 2

4 Nov 2008

5340-12-358-6883
Runner

123586883
84150/1165-03: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-12-330-8993
Plug Button

123308993
TP-312: RNCC: 3 | RNVC: 2
0258 0666: RNCC: 5 | RNVC: 2
2580666: RNCC: 5 | RNVC: 2
2580666EZ5758-80: RNCC: 5 | RNVC: 2
2580666: RNCC: 5 | RNVC: 2

23 Feb 1993

5340-12-318-7659
Eye Hook

123187659
42309537: RNCC: 3 | RNVC: 2
42309537KZ5516-29: RNCC: 5 | RNVC: 2

15 Aug 1989

5340-12-170-5728
Mending Plate

121705728
19331-00-4276-02: RNCC: 3 | RNVC: 2
19331-00-4276-02: RNCC: 5 | RNVC: 9
19331-00-4276-02: RNCC: 5 | RNVC: 9

20 Jul 1977

5340-12-329-8692
Butt Hinge Leaf

123298692
VG95211-ML-123298692: RNCC: 2 | RNVC: 2
65207-09002Y105: RNCC: 3 | RNVC: 2
65207-09002Y105: RNCC: 5 | RNVC: 2

8 Oct 1992

5340-12-139-7767
Rubber Bumper

121397767
PB2-70-225: RNCC: 3 | RNVC: 9
2088572: RNCC: 5 | RNVC: 2
40311823104: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-318-8798
Electronic Equipment Hardware Kit

123188798
870/004-120: RNCC: 3 | RNVC: 2
870/004-120: RNCC: 5 | RNVC: 2

22 Aug 1989

5340-12-327-5729
Friction Catch

123275729
7109/01: RNCC: 3 | RNVC: 2

4 Feb 1992

5340-12-194-3710
Spring Tension Clip

121943710
111837320: RNCC: 3 | RNVC: 2
81.62680.0038: RNCC: 5 | RNVC: 2
81626800038: RNCC: 5 | RNVC: 2

27 Oct 1982

5340-12-043-3349

5340-12-041-0859

5340-12-186-8008
Mending Plate

121868008
5802206-001000-003: RNCC: 2 | RNVC: 2
5802206-001000.003: RNCC: 2 | RNVC: 2
535.0224: RNCC: 3 | RNVC: 2
5350224: RNCC: 5 | RNVC: 2

6 Feb 1981

5340-12-161-9617
Angle Bracket

121619617
100332-014700.06: RNCC: 2 | RNVC: 2
100332-014700.06: RNCC: 3 | RNVC: 2
100332-57000.06: RNCC: 5 | RNVC: 2
100332-57000-06: RNCC: 5 | RNVC: 2
100332-57000.06: RNCC: 5 | RNVC: 2
100332-57000-06: RNCC: 5 | RNVC: 2
100332-57000-06: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-181-1841
Manual Control Handle

121811841
RH13158-181: RNCC: 3 | RNVC: 2

31 Oct 1979

5340-12-300-0238
Mending Plate

123000238
C249-A34-C47: RNCC: 2 | RNVC: 2
C249-A34-C47: RNCC: 3 | RNVC: 2

27 Jun 1984

5340-12-348-8583
Snap Hook

123488583
DIN5287-B60-A3D: RNCC: 2 | RNVC: 2

27 Aug 1999

5340-12-368-9277
Retaining Strap

123689277
0043328: RNCC: 3 | RNVC: 2

8 May 2006

5340-12-143-8000
Spring Tension Clip

121438000
8791250002: RNCC: 3 | RNVC: 9
BF2D3X: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-194-3896
Rim Lock

121943896
291827505: RNCC: 3 | RNVC: 2

28 Oct 1982

5340-12-369-9220
Metal Grille

123699220
65081: RNCC: 3 | RNVC: 2

28 Aug 2006

5340-12-308-8932
Plain Solid Disk

123088932
4463 342 034: RNCC: 3 | RNVC: 2
4463342034: RNCC: 5 | RNVC: 2

26 Nov 1986

5340-12-323-0478
Elastic Strap

123230478
T12945: RNCC: 3 | RNVC: 2
T12945: RNCC: 5 | RNVC: 9

18 Oct 1990

5340-12-155-2553
Butt Hinge Leaf

121552553
160-25560-67: RNCC: 3 | RNVC: 2
160-25560-67: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-306-2679
Shimmy Damper

123062679
31421232361: RNCC: 3 | RNVC: 9

12 Feb 1986

5340-12-343-5238
Resilient Mount

123435238
701399201AH: RNCC: 3 | RNVC: 9

1 Jul 1997

5340-12-155-2613
Mending Plate

121552613
160-25555-28: RNCC: 3 | RNVC: 2
160-25555-28: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-358-7932
Butt Hinge

123587932
2500299-31100.06: RNCC: 3 | RNVC: 2
A09030466: RNCC: 5 | RNVC: 2

14 Nov 2002

5340-12-358-9592
Nonmetallic Bumper

123589592
302868: RNCC: 3 | RNVC: 2
0006370296: RNCC: 5 | RNVC: 2

3 Dec 2002

5340-12-359-3209
Handle Grip

123593209
32727658871: RNCC: 3 | RNVC: 2

23 Jan 2003

5340-12-360-6977
Access Cover

123606977
T991M5006123: RNCC: 3 | RNVC: 2

1 Jul 2003

5340-12-359-4941
Metallic Bumper

123594941
0014904565: RNCC: 3 | RNVC: 2

11 Feb 2003

5340-12-316-3995
Angle Bracket

123163995
5186825: RNCC: 3 | RNVC: 2

16 Jan 1989

5340-12-198-0937
Double Angle Bracket

121980937
5801411-33011.008: RNCC: 3 | RNVC: 2
5801411-33011.008: RNCC: 5 | RNVC: 9

20 Dec 1983

5340-12-378-5365
Dust And Moisture Seal Protective Cap-Plug

123785365
J0403073G831-001A0-047: RNCC: 3 | RNVC: 2

20 Apr 2009

5340-12-308-8316
Access Cover

123088316
4.066-138.0: RNCC: 3 | RNVC: 2
4.066-138: RNCC: 5 | RNVC: 9

21 Nov 1986

5340-12-189-9881
Permanent Magnet

121899881
8020-4A: RNCC: 3 | RNVC: 2
5392-4: RNCC: 5 | RNVC: 2
8020-4: RNCC: 5 | RNVC: 9

2 Nov 1981

5340-12-702-4478
Mounting Bracket

127024478
VG95211-ML-127024478: RNCC: 2 | RNVC: 2
5.51.0602.0000.15: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-700-8737
Mounting Plate

127008737
VG95211-ML-127008737: RNCC: 2 | RNVC: 2
155N855-A: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-2524
Mounting Bracket

127012524
VG95211-ML-127012524: RNCC: 2 | RNVC: 2
5.12.4001.0101.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-303-5900
Butt Hinge

123035900
704-121490-903-0: RNCC: 3 | RNVC: 2

11 Apr 1985

5340-12-344-4690
Access Cover

123444690
2500255-197301.000.0: RNCC: 2 | RNVC: 2
2500255-197301.000.0: RNCC: 3 | RNVC: 2

30 Oct 1997

5340-12-377-6734
Webbing Strap

123776734
4100036-150391.000: RNCC: 2 | RNVC: 2
4100036-150391.000: RNCC: 3 | RNVC: 2

2 Feb 2009

5340-12-337-8512
Casement Fastener

123378512
6600152-102200.00: RNCC: 2 | RNVC: 2
6600152-102200.00: RNCC: 3 | RNVC: 2
9826149: RNCC: 5 | RNVC: 2

24 Apr 1995

5340-12-371-3182
Angle Bracket

123713182
J92226521-001: RNCC: 3 | RNVC: 2

14 Mar 2007

5340-12-333-8513
Nonmetallic Bumper

123338513
DIN95364-A30X16-M8X23-NR55ST: RNCC: 2 | RNVC: 2
3018035: RNCC: 5 | RNVC: 2
53000-30X16-M8X23.NR55.ST: RNCC: 5 | RNVC: 2
VG95364-A30X16-M8X23-NR55ST: RNCC: 5 | RNVC: 9

17 Feb 1994

5340-12-191-8299
Door Button

121918299
14021-15008.02: RNCC: 3 | RNVC: 2
14021-15008-02: RNCC: 5 | RNVC: 2

8 Mar 1982

5340-12-154-9397
Helical Compression Spring Seat

121549397
0331 8902: RNCC: 3 | RNVC: 2
3318902EE0185-08: RNCC: 5 | RNVC: 2
259966A: RNCC: 5 | RNVC: 2
3318902: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-144-8648
Butt Hinge Leaf

121448648
A25X3X432HAN16515W3355-7SWEL0X: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-189-6891
Retaining Strap

121896891
31 039-001: RNCC: 3 | RNVC: 2
31039-001: RNCC: 5 | RNVC: 2

12 Oct 1981

5340-12-317-3469
Angle Bracket

123173469
4900064-4124.013: RNCC: 3 | RNVC: 2

30 Mar 1989

5340-12-321-5083
Spring Loaded Cylinder Fastener

123215083
9000 3043: RNCC: 3 | RNVC: 2

25 May 1990

5340-12-388-7752
Dust And Moisture Seal Protective Cover

123887752
5802017-702140.00: RNCC: 2 | RNVC: 2

20 Apr 2012

5340-12-171-2098

5340-12-355-1784
Mounting Bracket

123551784
VG95211-ML-123551784: RNCC: 2 | RNVC: 2
5.12.0246.0450.92: RNCC: 3 | RNVC: 2

18 Oct 2001

5340-12-301-1190
Double Angle Bracket

123011190
P-855152-401: RNCC: 3 | RNVC: 2
P855152-401: RNCC: 5 | RNVC: 2

22 Sep 1984

5340-12-366-5732
Nonmetallic Bumper

123665732
680003/7323-08-00-44: RNCC: 3 | RNVC: 2
244763: RNCC: 5 | RNVC: 2

10 May 2005

5340-12-701-7072
Mounting Plate

127017072
VG95211-ML-127017072: RNCC: 2 | RNVC: 2
5.12.7240.8050.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-388-3805
Mending Plate

123883805
B-533-002: RNCC: 3 | RNVC: 2

15 Mar 2012

5340-12-314-1252
Double Angle Bracket

123141252
3875420940: RNCC: 3 | RNVC: 2
387 542 09 40: RNCC: 5 | RNVC: 2

9 Jun 1988

5340-12-381-0877
Butt Hinge

123810877
4256830059: RNCC: 3 | RNVC: 2

11 Jan 2010

5340-12-387-4808
Dust And Moisture Seal Protective Cap

123874808
10097087-BUND: RNCC: 3 | RNVC: 2

27 Dec 2011

5340-12-330-4873
Bow Handle

123304873
6600153-982141.000.0: RNCC: 2 | RNVC: 2
6600153-982141.000.0: RNCC: 3 | RNVC: 2

22 Dec 1992

5340-12-307-9705
Angle Bracket

123079705
33A47-0025-00.002: RNCC: 3 | RNVC: 2
FS26508: RNCC: 5 | RNVC: 9

15 Aug 1986

5340-12-310-2837
Retaining Clip

123102837
C22136-A1000-C120: RNCC: 3 | RNVC: 2

5 May 1987

5340-12-361-8060
Access Cover

123618060
110.01.033.000-00: RNCC: 3 | RNVC: 2

19 Nov 2003

5340-12-303-9324
Folding Stay

123039324
200451: RNCC: 3 | RNVC: 2
200451: RNCC: 5 | RNVC: 2

21 May 1985

5340-12-357-6235
Access Cover

123576235
0015451903: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-12-326-4450
Double Angle Bracket

123264450
3963120660: RNCC: 3 | RNVC: 2

17 Sep 1991

5340-12-342-0861
Mounting Plate

123420861
5803571-107310.00: RNCC: 3 | RNVC: 2

10 Dec 1996

5340-12-091-7273

5340-12-390-0901
Mounting Bracket

123900901
H020M2001201: RNCC: 3 | RNVC: 2

2 Oct 2012

5340-12-385-5503
Mounting Bracket

123855503
5841751141: RNCC: 3 | RNVC: 2

15 Jun 2011

5340-12-352-3572
Door Button

123523572
5400051-773217.00: RNCC: 2 | RNVC: 2
5400051-773217.00: RNCC: 3 | RNVC: 2

10 Nov 2000

5340-12-701-4984
Mounting Bracket

127014984
VG95211-ML-127014984: RNCC: 2 | RNVC: 2
5.12.5850.4220.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-176-4890
Loop Clamp

121764890
0336 1849: RNCC: 3 | RNVC: 2
3361849EE0146-22: RNCC: 3 | RNVC: 2
0146-22-28-12: RNCC: 5 | RNVC: 2
3361849: RNCC: 5 | RNVC: 9

30 Nov 1978

5340-12-321-6472
Mounting Bracket

123216472
555.04-01-00-003: RNCC: 3 | RNVC: 2
010748: RNCC: 5 | RNVC: 2
555-00-040100003: RNCC: 5 | RNVC: 2

12 Jun 1990

5340-12-157-7084
Hand Crank

121577084
H6-44-1: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-171-3166
Webbing Strap

121713166
MZAE002.00: RNCC: 3 | RNVC: 2
98601701: RNCC: 3 | RNVC: 2
8012-5000.04: RNCC: 5 | RNVC: 2
846.8012-5000.04: RNCC: 5 | RNVC: 2
8012-5000.04: RNCC: 5 | RNVC: 9
8012-5000-04: RNCC: 5 | RNVC: 9

29 Sep 1977

5340-12-195-7233
Clamping Catch

121957233
5801557-2010.00: RNCC: 2 | RNVC: 2
5801557-2010.00: RNCC: 3 | RNVC: 2
5801557-2010: RNCC: 5 | RNVC: 2
5801557-2010: RNCC: 5 | RNVC: 9

5 Apr 1983

5340-12-309-4829
Angle Bracket

123094829
70.1200.220-06: RNCC: 3 | RNVC: 2

28 Jan 1987

5340-12-390-3850
Nut And Bolt Retainer

123903850
84255821: RNCC: 3 | RNVC: 2
U208801/12: RNCC: 5 | RNVC: 2

7 Nov 2012

5340-12-026-1589

5340-12-334-2878
Metal Grille

123342878
0000463201-01A11: RNCC: 3 | RNVC: 2
8495590540: RNCC: 5 | RNVC: 2

22 Apr 1994

5340-12-345-7541
Handle Grip

123457541
06460-4101X55: RNCC: 3 | RNVC: 2
TA3008P014: RNCC: 5 | RNVC: 2
NLM6460-4101-55: RNCC: 5 | RNVC: 9

22 Apr 1998

5340-12-386-8393
Loop Clamp

123868393
05551919: RNCC: 3 | RNVC: 2
CV190420: RNCC: 5 | RNVC: 2
05551919: RNCC: 5 | RNVC: 2

6 Oct 2011

5340-12-309-7945
Access Cover

123097945
6123898: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-12-315-0215
Webbing Strap

123150215
160-26284-08: RNCC: 3 | RNVC: 2
160-26284-08: RNCC: 5 | RNVC: 9

8 Sep 1988

5340-12-176-6272
Dust And Moisture Seal Protective Plug

121766272
5800822-051-058: RNCC: 3 | RNVC: 2
5800822-051.058: RNCC: 5 | RNVC: 2

11 Dec 1978

5340-12-317-5733
Casement Fastener

123175733
4900064-4124.006: RNCC: 3 | RNVC: 2

19 Apr 1989

5340-12-354-8361
Retaining Strap

123548361
5400049-524080.01: RNCC: 2 | RNVC: 2
5400049-524080.01: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-194-1679
Bow Handle

121941679
23114-0446.08: RNCC: 2 | RNVC: 2
23114-0446.08: RNCC: 3 | RNVC: 2
23114-0446-08: RNCC: 5 | RNVC: 9
23114-0446.08: RNCC: 5 | RNVC: 9
23114-0446-08: RNCC: 5 | RNVC: 9
23114-0446.08: RNCC: 5 | RNVC: 9

7 Oct 1982

5340-12-378-4209
Access Cover

123784209
1650-512200-16: RNCC: 3 | RNVC: 2

3 Apr 2009

5340-12-340-9960
Mounting Plate

123409960
20-7210-130: RNCC: 3 | RNVC: 2

13 Jul 1996

5340-12-166-9093
Retaining Strap

121669093
5800748-11.122: RNCC: 3 | RNVC: 2
5800748-11-122: RNCC: 5 | RNVC: 9

29 Oct 1976

5340-12-348-2643
Angle Bracket

123482643
A-085047-005: RNCC: 3 | RNVC: 2
A085047-005: RNCC: 5 | RNVC: 2

19 May 1999

5340-12-187-8163
Angle Bracket

121878163
2300109-970400.086.0: RNCC: 2 | RNVC: 2
2300109-970400.086.0: RNCC: 3 | RNVC: 2
2300109-970400.086.0: RNCC: 3 | RNVC: 2
2300109-970400-086-0: RNCC: 5 | RNVC: 2
2300109-970400-086-0: RNCC: 5 | RNVC: 2
2300109-970400.086.0: RNCC: 5 | RNVC: 9
2300109-970400-086-0: RNCC: 5 | RNVC: 9

13 May 1981

5340-12-352-2264
Angle Bracket

123522264
5062032440: RNCC: 3 | RNVC: 2
506 203 24 40: RNCC: 5 | RNVC: 2

26 Oct 2000

5340-12-352-7144
Access Cover

123527144
64416367: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-12-347-2575
Spring Loaded Cylinder Fastener

123472575
2212.108: RNCC: 3 | RNVC: 2
2212-108: RNCC: 5 | RNVC: 2

17 Nov 1998

5340-12-357-7769
Mechanical Stop

123577769
N535M1004101: RNCC: 3 | RNVC: 2

23 Jul 2002

5340-12-388-0650
Plug Button

123880650
2300225-092400.010.0: RNCC: 3 | RNVC: 2

22 Feb 2012

5340-12-329-5276
Loop Clamp

123295276
DIN3016-1-D1-14X15-W5-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-14X15-W5: RNCC: 3 | RNVC: 2
58R052-151-22: RNCC: 5 | RNVC: 2
DIN3016-D1-14X15-W5: RNCC: 5 | RNVC: 9

27 Aug 1992

5340-12-360-7901
Strap Hinge

123607901
352646: RNCC: 3 | RNVC: 2
10-0076-658: RNCC: 5 | RNVC: 2

10 Jul 2003

5340-12-701-8490
Loop Clamp

127018490
VG95211-ML-127018490: RNCC: 2 | RNVC: 2
5191A-26: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-319-4677
Lock-Release Lever

123194677
0141204501: RNCC: 3 | RNVC: 2
06430-4121X45: RNCC: 3 | RNVC: 2
643-4121X45: RNCC: 5 | RNVC: 9
NLM6430-4121X45: RNCC: 5 | RNVC: 9

4 Oct 1989

5340-12-198-6772
Lock-Release Lever

121986772
00-7331-0495/01-00-03: RNCC: 2 | RNVC: 2

17 Feb 1984

5340-12-146-4635
Helical Compression Spring Seat

121464635
14011-0501-07: RNCC: 3 | RNVC: 2
14011-0501-07: RNCC: 5 | RNVC: 2
VAO8.22: RNCC: 5 | RNVC: 2
14011-0501-07: RNCC: 5 | RNVC: 9
14011-0501-07: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-305-2823
Mending Plate

123052823
5801758-8000.01: RNCC: 2 | RNVC: 2
5801758-8000.01: RNCC: 3 | RNVC: 2
5801758-8000.01: RNCC: 5 | RNVC: 9

16 Oct 1985

5340-12-322-8087
Plain Solid Disk

123228087
8470 032 145: RNCC: 3 | RNVC: 2
8470032145: RNCC: 5 | RNVC: 2
8470032145: RNCC: 5 | RNVC: 9

25 Sep 1990

5340-12-367-1920
Butt Hinge

123671920
S252M3168211: RNCC: 3 | RNVC: 2

19 Jul 2005

5340-12-366-9711
Mounting Bracket

123669711
S252M3127210: RNCC: 3 | RNVC: 2

27 Jun 2005

5340-12-194-4910
Sliding Stay

121944910
5498680: RNCC: 3 | RNVC: 2
549.8680: RNCC: 5 | RNVC: 2

9 Nov 1982

5340-12-374-2515
Mounting Bracket

123742515
L342M2802101: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-383-8033
Access Cover

123838033
701700004: RNCC: 3 | RNVC: 2

9 Dec 2010

5340-12-373-1986
Spring Tension Clip

123731986
12029536EE0112-22: RNCC: 3 | RNVC: 2

9 Oct 2007

5340-12-043-4210

5340-12-026-6102

5340-12-302-9654
Clamping Catch

123029654
0121 2482: RNCC: 3 | RNVC: 2
01212482ED8935-37: RNCC: 5 | RNVC: 2
1423678: RNCC: 5 | RNVC: 2
4786382: RNCC: 5 | RNVC: 2
01212482: RNCC: 5 | RNVC: 2
1212482ED8935-37: RNCC: 5 | RNVC: 2
3537D6: RNCC: 5 | RNVC: 9

12 Feb 1985

5340-12-314-6524
Electrical-Mechanical Equipment Post

123146524
512214-0421.000: RNCC: 3 | RNVC: 2
512214-0421: RNCC: 5 | RNVC: 2

27 Jul 1988

5340-12-177-2358
Double Angle Bracket

121772358
2300002-224200.019: RNCC: 2 | RNVC: 2
2300002-224200.019: RNCC: 3 | RNVC: 2
2300002-224200-019: RNCC: 5 | RNVC: 9
2300002-224200.019: RNCC: 5 | RNVC: 9

22 Jan 1979

5340-12-177-4639
Manual Control Handle

121774639
2300002-181340.000: RNCC: 2 | RNVC: 2
2300002-181340.000: RNCC: 3 | RNVC: 2
9830782: RNCC: 5 | RNVC: 2
2300002-181340: RNCC: 5 | RNVC: 9
9830782: RNCC: 5 | RNVC: 9
2300002-181340: RNCC: 5 | RNVC: 9
9830782: RNCC: 5 | RNVC: 9

1 Feb 1979

5340-12-338-9870
Access Cover

123389870
2300002-224552.000: RNCC: 2 | RNVC: 2
2300002-224552.000: RNCC: 3 | RNVC: 2
9869551: RNCC: 5 | RNVC: 2
2300002-224552.000: RNCC: 5 | RNVC: 9
2300002-224552.000: RNCC: 5 | RNVC: 9
9869551: RNCC: 5 | RNVC: 9

22 Sep 1995

5340-12-338-6918
Retaining Strap

123386918
463-068000.002: RNCC: 3 | RNVC: 9
9897388: RNCC: 5 | RNVC: 9

16 Aug 1995

5340-12-338-8379
T Bracket

123388379
463-223695.000: RNCC: 3 | RNVC: 9
9896396: RNCC: 5 | RNVC: 9

30 Aug 1995

5340-12-361-7895
Loop Clamp

123617895
DIN3016-D1-20X15-W5: RNCC: 2 | RNVC: 2
RSGU1.20/15-W5: RNCC: 3 | RNVC: 2
103161: RNCC: 5 | RNVC: 2

18 Nov 2003

5340-12-156-9779
Nonmetallic Bumper

121569779
81960200149: RNCC: 3 | RNVC: 2
59006001: RNCC: 5 | RNVC: 2
81.96020-0149: RNCC: 5 | RNVC: 2
EE96/96KERN-F-QUALRTK55KOMPLETT: RNCC: 5 | RNVC: 2
RT621109SB: RNCC: 5 | RNVC: 2
E96-96KERNFQUALRTE55: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-361-2127
Mounting Bracket

123612127
J92224257-401: RNCC: 3 | RNVC: 2

4 Sep 2003

5340-12-354-3889
Double Angle Bracket

123543889
J53230660-009: RNCC: 3 | RNVC: 2

6 Jul 2001

5340-12-361-0337
Angle Bracket

123610337
J32320221-405: RNCC: 3 | RNVC: 2

12 Aug 2003

5340-12-370-6296
Dust And Moisture Seal Protective Cap

123706296
9GH 116 966-011: RNCC: 3 | RNVC: 2
9GH116966011: RNCC: 5 | RNVC: 2
9GH116966011: RNCC: 5 | RNVC: 2

4 Dec 2006

5340-12-366-7810
Flush Lock

123667810
1000-U221: RNCC: 3 | RNVC: 2
704253377: RNCC: 5 | RNVC: 2

7 Jun 2005

5340-12-702-0906
Angle Bracket

127020906
VG95211-ML-127020906: RNCC: 2 | RNVC: 2
30.5311.460: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-146-2357
Loop Clamp

121462357
23114-5006.10: RNCC: 2 | RNVC: 2
23114-5006-10: RNCC: 3 | RNVC: 2
23114-5006-10: RNCC: 5 | RNVC: 9
23114-5006-10: RNCC: 5 | RNVC: 9
23114-5006-10: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-372-7190
Retaining Band

123727190
925585877: RNCC: 3 | RNVC: 2
3201-852.01.01.300-000: RNCC: 5 | RNVC: 2

15 Aug 2007

5340-12-184-5193
Metal Runner

121845193
5801339-0201-009: RNCC: 3 | RNVC: 2
5801339-0201.009: RNCC: 5 | RNVC: 2

29 Jul 1980

5340-12-352-2139
Double Angle Bracket

123522139
T531M1611201: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-12-322-3581
Mounting Bracket

123223581
100013065: RNCC: 3 | RNVC: 2

15 Aug 1990

5340-12-383-5959
Manual Control Handle

123835959
864005005: RNCC: 3 | RNVC: 2

11 Nov 2010

5340-12-317-4638
Double Angle Bracket

123174638
2300088-103501.03: RNCC: 2 | RNVC: 2
2300088-103501.03: RNCC: 3 | RNVC: 2
2300088-103501.03: RNCC: 5 | RNVC: 9

11 Apr 1989

5340-12-387-1696
Mounting Bracket

123871696
60005271: RNCC: 3 | RNVC: 2
4-0670.7220.01-B: RNCC: 5 | RNVC: 2

11 Nov 2011

5340-12-199-5334
Webbing Strap

121995334
5801435-030720.00: RNCC: 2 | RNVC: 2
5801435-030720.00: RNCC: 3 | RNVC: 2
5801435-030720-00: RNCC: 5 | RNVC: 2
000-C1-25X2,5X500-BW-RAL6031: RNCC: 6 | RNVC: 9

9 May 1984

5340-12-309-8187
Dust And Moisture Seal Protective Cap

123098187
320-997001-07: RNCC: 3 | RNVC: 2

6 Mar 1987

5340-12-198-2001
Mending Plate

121982001
56-0049-253-08: RNCC: 3 | RNVC: 2

29 Dec 1983

5340-12-302-8387
Detent Plunger

123028387
1000128-5000.01: RNCC: 2 | RNVC: 2
49.008.50000.01E: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-12-160-0217
Dust And Moisture Seal Protective Cap-Plug

121600217
F211ROT: RNCC: 3 | RNVC: 2
4025090068: RNCC: 5 | RNVC: 2
N25-006: RNCC: 5 | RNVC: 2
F211: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-701-7957
Mounting Plate

127017957
VG95211-ML-127017957: RNCC: 2 | RNVC: 2
5.12.8102.2501.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-375-3616
Angle Bracket

123753616
2 0103-283: RNCC: 3 | RNVC: 2
2 0103-283: RNCC: 5 | RNVC: 2

26 May 2008

5340-12-336-8314
Retaining Bail

123368314
7260 0 906 285: RNCC: 3 | RNVC: 2

23 Dec 1994

5340-12-376-3941
Latch Bar

123763941
81626800065: RNCC: 3 | RNVC: 2
81.62680-0065: RNCC: 5 | RNVC: 2

23 Sep 2008

5340-12-167-5477
Double Angle Bracket

121675477
3554264: RNCC: 3 | RNVC: 2
3554264: RNCC: 5 | RNVC: 2
2852-8245-00: RNCC: 5 | RNVC: 2

3 Jan 1977

5340-12-360-8990
Spacing Threaded Standoff

123608990
7835011117: RNCC: 3 | RNVC: 2

22 Jul 2003

5340-12-185-1211
Mending Plate

121851211
2702033600: RNCC: 3 | RNVC: 2
27020 33600: RNCC: 5 | RNVC: 9

11 Sep 1980

5340-12-350-7015
Retaining Strap

123507015
10.2603.P5: RNCC: 3 | RNVC: 2

8 May 2000

5340-12-379-3903
Manual Control Handle

123793903
4757107112: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-12-370-9041
Access Door Hinge

123709041
SACS18517: RNCC: 3 | RNVC: 2

15 Jan 2007

5340-12-316-8265
Angle Bracket

123168265
2300279-9701.09: RNCC: 2 | RNVC: 2
2300279-9701.09: RNCC: 3 | RNVC: 2
2300279-9701.09: RNCC: 5 | RNVC: 9
9871537: RNCC: 5 | RNVC: 9

16 Feb 1989

5340-12-372-9966
Butt Hinge

123729966
4191629: RNCC: 3 | RNVC: 2

14 Sep 2007

5340-12-380-2196
Angle Bracket

123802196
4374211894: RNCC: 3 | RNVC: 2

7 Oct 2009

5340-12-176-0403
Loop Clamp

121760403
LN9490B38: RNCC: 2 | RNVC: 2

6 Nov 1978

5340-12-366-4940
Mechanical Stop

123664940
272.338.226: RNCC: 3 | RNVC: 2

28 Apr 2005

5340-12-321-6693
Access Cover

123216693
C42107-A459-B3: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-12-370-3017
Ball Socket Seat

123703017
506-40120: RNCC: 3 | RNVC: 2
169885: RNCC: 5 | RNVC: 2

23 Oct 2006

5340-12-134-0627
Loop Clamp

121340627
E5112-75-05-15: RNCC: 3 | RNVC: 2
5112-75-05-15: RNCC: 5 | RNVC: 9
5112-75-05.15: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-326-7892
Angle Bracket

123267892
1000227-0000.04: RNCC: 2 | RNVC: 2
1000227-0000.04: RNCC: 3 | RNVC: 2

25 Oct 1991

5340-12-325-3663
Loop Clamp

123253663
050H4200-01: RNCC: 3 | RNVC: 2
170563550: RNCC: 5 | RNVC: 2

29 May 1991

5340-12-356-1760
Mechanical Stop

123561760
ED41-0800-00205-113: RNCC: 2 | RNVC: 2
ED41-0800-00205-113: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-12-123-4269
Rod End Clevis

121234269
81954505000: RNCC: 3 | RNVC: 2
00.00370-2180: RNCC: 5 | RNVC: 2
00003702180: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-302-6159
Metal Runner

123026159
YK03330685: RNCC: 3 | RNVC: 2
03330685: RNCC: 5 | RNVC: 9
H.B.913SV 1056 1975 03 33 0685: RNCC: 5 | RNVC: 9

17 Jan 1985

5340-12-364-1983
Escutcheon Plate

123641983
518.67.01: RNCC: 3 | RNVC: 2

1 Sep 2004

5340-12-363-5794
Cushioning Pad

123635794
0140 2706: RNCC: 3 | RNVC: 2

6 Jul 2004

5340-12-371-9767
Webbing Strap

123719767
11654: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-12-180-4705
Mounting Bracket

121804705
3875460044: RNCC: 3 | RNVC: 2

12 Sep 1979

5340-12-327-5163
Mounting Plate

123275163
60245223: RNCC: 3 | RNVC: 2

29 Jan 1992

5340-12-377-3502
Loop Clamp

123773502
41271182: RNCC: 3 | RNVC: 2
41271182: RNCC: 5 | RNVC: 2

12 Jan 2009

5340-12-385-5368
Mounting Plate

123855368
5561532541: RNCC: 3 | RNVC: 2

14 Jun 2011

5340-12-358-7364
Elastic Strap

123587364
P20602: RNCC: 3 | RNVC: 2

11 Nov 2002

5340-12-324-8136
Webbing Strap

123248136
702-445120-000-0: RNCC: 3 | RNVC: 2

26 Mar 1991

5340-12-394-3742
Mechanic Equipment Hardware Kit

123943742
Y2300306-189898.000.0: RNCC: 2 | RNVC: 2
Y2300306-189898.000.0: RNCC: 3 | RNVC: 2

26 Nov 2013

5340-12-366-1265
Mounting Bracket

123661265
2500278-190065.000.0: RNCC: 3 | RNVC: 2

10 Mar 2005

5340-12-702-4210
Mounting Bracket

127024210
VG95211-ML-127024210: RNCC: 2 | RNVC: 2
5.12.7080.1450.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-149-7499
Spring Tension Clip

121497499
330108-1008.000: RNCC: 3 | RNVC: 2
1240-11000.008: RNCC: 5 | RNVC: 2
1240-11000-008: RNCC: 5 | RNVC: 9
330108-1008.000: RNCC: 5 | RNVC: 9
1240-11000-008: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-312-9974
Bridge Clamp

123129974
401816-00: RNCC: 3 | RNVC: 2
9XB401816-00: RNCC: 3 | RNVC: 2

24 Feb 1988

5340-12-181-2819
Platte

121812819
1361016-11001-02: RNCC: 3 | RNVC: 2

9 Nov 1979

5340-12-376-9029
Bumper

123769029
EE-M0033-41: RNCC: 3 | RNVC: 2

20 Nov 2008

5340-12-701-2421
Loop Clamp

127012421
VG95211-ML-127012421: RNCC: 2 | RNVC: 2
5.12.3300.1023.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-3520
Rod End Connector

127013520
VG95211-ML-127013520: RNCC: 2 | RNVC: 2
5.12.5111.4420.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-182-7361
Mounting Bracket

121827361
25780-4000.001: RNCC: 2 | RNVC: 2
25780-4000.001: RNCC: 3 | RNVC: 2
25780-4000-001: RNCC: 5 | RNVC: 2
25780-4000.001: RNCC: 5 | RNVC: 9

22 Feb 1980

5340-12-196-2496
Angle Bracket

121962496
03666700: RNCC: 3 | RNVC: 2

20 Jun 1983

5340-12-321-9664
Dust And Moisture Seal Protective Plug

123219664
1463203420: RNCC: 3 | RNVC: 2
1463203420: RNCC: 5 | RNVC: 2
1463203385: RNCC: 5 | RNVC: 9

12 Jul 1990

5340-12-194-8511
Mending Plate

121948511
5549281: RNCC: 3 | RNVC: 2
554.9281: RNCC: 5 | RNVC: 2

14 Dec 1982

5340-12-394-1489
Access Cover

123941489
310.02.035: RNCC: 3 | RNVC: 2
310.02.035: RNCC: 5 | RNVC: 2

7 Nov 2013

5340-12-344-4361
Nonmetallic Bumper

123444361
5500781038: RNCC: 3 | RNVC: 2
550 078 10 38: RNCC: 5 | RNVC: 2

28 Oct 1997

5340-12-356-9621
Rod End Clevis

123569621
4683149: RNCC: 3 | RNVC: 2
4683149: RNCC: 5 | RNVC: 2

19 Apr 2002

5340-12-314-8292
Shimmy Damper

123148292
16-4-326: RNCC: 3 | RNVC: 2
01600326: RNCC: 5 | RNVC: 2

13 Aug 1988

5340-12-199-7246
Pipe Bracket

121997246
1363484: RNCC: 3 | RNVC: 2
734/48M10: RNCC: 5 | RNVC: 2
PG48-60MMN500: RNCC: 5 | RNVC: 2

25 May 1984

5340-12-316-5841
Angle Bracket

123165841
512214-3601.000: RNCC: 3 | RNVC: 2
512214-3601: RNCC: 5 | RNVC: 2

26 Jan 1989

5340-12-187-8175
Retaining Strap

121878175
2300109-970100.073.0: RNCC: 2 | RNVC: 2
2300109-970100.073.0: RNCC: 3 | RNVC: 2
2300109-970100.073.0: RNCC: 3 | RNVC: 2
2300109-970100-073-0: RNCC: 5 | RNVC: 2
2300109-970100-073-0: RNCC: 5 | RNVC: 2
2300109-970100-073-0: RNCC: 5 | RNVC: 9
2300109-970100.073.0: RNCC: 5 | RNVC: 9

13 May 1981

5340-12-307-9408
Angle Bracket

123079408
5801434-512700.00: RNCC: 2 | RNVC: 2
7800542700: RNCC: 3 | RNVC: 2
78005 42700: RNCC: 5 | RNVC: 9

13 Aug 1986

5340-12-198-7621
Angle Bracket

121987621
AM1480-78-10: RNCC: 3 | RNVC: 2

23 Feb 1984

5340-12-349-0955
Mounting Bracket

123490955
325G-112-T8: RNCC: 3 | RNVC: 2

23 Sep 1999

5340-12-164-7664
Flush Lock

121647664
6000498: RNCC: 3 | RNVC: 2
B01-93-90-008: RNCC: 3 | RNVC: 2
2608-309: RNCC: 5 | RNVC: 2
2608309: RNCC: 5 | RNVC: 2
600K0378: RNCC: 5 | RNVC: 2
70400000921RECHTS: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-313-7983
Retaining Strap

123137983
1684046-100.07: RNCC: 3 | RNVC: 2

6 May 1988

5340-12-122-7504
Retaining Strap

121227504
NO PRIMARY REF 12-122-7504: RNCC: 3 | RNVC: 2
1331590100: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-180-9631
Angle Bracket

121809631
5802008-000000-002: RNCC: 2 | RNVC: 2
9322003-79: RNCC: 5 | RNVC: 2
9322003-79: RNCC: 5 | RNVC: 9

12 Oct 1979

5340-12-701-9036
Loop Clamp

127019036
VG95211-ML-127019036: RNCC: 2 | RNVC: 2
N1119-95: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-332-6612
Angle Bracket

123326612
81974870535: RNCC: 2 | RNVC: 2
81974870535: RNCC: 3 | RNVC: 2
81.97487-0535: RNCC: 5 | RNVC: 2

2 Sep 1993

5340-12-361-2129
Double Angle Bracket

123612129
J92228110-001: RNCC: 3 | RNVC: 2

4 Sep 2003

5340-12-357-8812
Angle Bracket

123578812
2300042-254060.001: RNCC: 2 | RNVC: 2
2300042-254060.001: RNCC: 3 | RNVC: 2

7 Aug 2002

5340-12-392-3617
Dust And Moisture Seal Protective Cap

123923617
I011085: RNCC: 3 | RNVC: 2

29 May 2013

5340-12-381-7221
Mounting Bracket

123817221
82998011416: RNCC: 3 | RNVC: 2

23 Mar 2010

5340-12-391-1500
Elastic Strap

123911500
2033686997: RNCC: 3 | RNVC: 2

21 Feb 2013

5340-12-337-9755
Access Cover

123379755
839.5552.00: RNCC: 3 | RNVC: 2

8 May 1995

5340-12-040-1015

5340-12-336-9607
Angle Bracket

123369607
0216 8855: RNCC: 3 | RNVC: 2
216 8855ED0150-01: RNCC: 5 | RNVC: 9

2 Jan 1995

5340-12-177-9535
Mounting Bracket

121779535
2300002-052500.001: RNCC: 2 | RNVC: 2
2300002-052500.001: RNCC: 3 | RNVC: 2
2300002-052500-001: RNCC: 5 | RNVC: 9
2300002-052500.001: RNCC: 5 | RNVC: 9

9 Mar 1979

5340-12-173-1502
Plain Solid Disk

121731502
116-100-0462-001: RNCC: 3 | RNVC: 2

22 Mar 1978

5340-12-701-6480
Mounting Bracket

127016480
VG95211-ML-127016480: RNCC: 2 | RNVC: 2
5.12.7204.8010.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-199-0555
Mending Plate

121990555
5801433-081000.02.0: RNCC: 3 | RNVC: 2
5801433-081000-02-0: RNCC: 5 | RNVC: 2

22 Mar 1984

5340-12-166-8978
Retaining Strap

121668978
23290-203000.001: RNCC: 2 | RNVC: 2
23290-203000.001: RNCC: 3 | RNVC: 2
23290-203000-001: RNCC: 5 | RNVC: 9
23290-203000.001: RNCC: 5 | RNVC: 9

29 Oct 1976

5340-12-197-3731
Clamping Catch

121973731
531906-0003: RNCC: 3 | RNVC: 2
531906-0003.000: RNCC: 5 | RNVC: 9
531906-0003: RNCC: 5 | RNVC: 9

17 Oct 1983

5340-12-197-2049
Handwheel

121972049
DIN390-C80-AL: RNCC: 2 | RNVC: 2
0018-2992-280AL: RNCC: 5 | RNVC: 2
C80DIN390-AL: RNCC: 5 | RNVC: 2
0018-2992-280AL: RNCC: 5 | RNVC: 9

29 Sep 1983

5340-12-182-8756
Spring Tension Clip

121828756
LN29789-16: RNCC: 2 | RNVC: 2

4 Mar 1980

5340-12-324-7094
Retaining Clip

123247094
4.034-060.0: RNCC: 3 | RNVC: 2
4.034-060: RNCC: 5 | RNVC: 9

19 Mar 1991

5340-12-324-4803
Snap Hook

123244803
DIN5299-A50ZN: RNCC: 2 | RNVC: 2
DIN5299-A50-ZN: RNCC: 3 | RNVC: 2
YDX-5001 1/2-50 VERZINKT: RNCC: 3 | RNVC: 9
DIN5299-A50-VERZINKT: RNCC: 5 | RNVC: 2
5001 1/2-50 VERZINKT: RNCC: 5 | RNVC: 9

21 Feb 1991

5340-12-358-4238
Access Cover

123584238
2500262-190234.000.0: RNCC: 2 | RNVC: 2
2500262-190234.000.0: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-12-154-4310
Spring Tension Clip

121544310
71-10482-00: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-381-1526
Bumper

123811526
6.339-171.0: RNCC: 3 | RNVC: 2

14 Jan 2010

5340-12-370-5701
Mounting Bracket

123705701
4.037-13.0: RNCC: 3 | RNVC: 2
4.037-13: RNCC: 5 | RNVC: 2

23 Nov 2006

5340-12-701-6963
Angle Bracket

127016963
VG95211-ML-127016963: RNCC: 2 | RNVC: 2
5.12.7222.8040.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-304-8235
Lock-Release Lever

123048235
2300126-181306.000.0: RNCC: 2 | RNVC: 2
2300126-181306.000.0: RNCC: 3 | RNVC: 2
2300126-181306.000.0: RNCC: 5 | RNVC: 2
2300126-181306.000.0: RNCC: 5 | RNVC: 9

28 Aug 1985

5340-12-702-5429
Mounting Plate

127025429
VG95211-ML-127025429: RNCC: 2 | RNVC: 2
5.51.7210.0684.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-347-8537
Angle Bracket

123478537
51191010160: RNCC: 3 | RNVC: 2
51.19101-0160: RNCC: 5 | RNVC: 2

23 Feb 1999

5340-12-372-8247
Manual Control Lever

123728247
6023208: RNCC: 3 | RNVC: 2

24 Aug 2007

5340-12-194-4104
Slide Keeper

121944104
281827162: RNCC: 3 | RNVC: 2
281827162A: RNCC: 3 | RNVC: 9

3 Nov 1982

5340-12-382-2544
Angle Bracket

123822544
S433M1171101: RNCC: 3 | RNVC: 2

28 May 2010

5340-12-391-4691
Access Cover

123914691
I006275TAN686A: RNCC: 3 | RNVC: 2

13 Mar 2013

5340-12-305-3945
Butt Hinge

123053945
205-060-810-5039: RNCC: 3 | RNVC: 2

31 Oct 1985

5340-12-196-5741
Angle Bracket

121965741
KB-60751-872: RNCC: 3 | RNVC: 2

19 Jul 1983

5340-12-351-3472
Support Hook

123513472
VG95211-ML-123513472: RNCC: 2 | RNVC: 2
P70158105001: RNCC: 3 | RNVC: 2

17 Jul 2000

5340-12-146-2348
Leather Strap

121462348
23114-4369.00: RNCC: 2 | RNVC: 2
23114-4369-00: RNCC: 5 | RNVC: 2
23114-4369-00: RNCC: 5 | RNVC: 9
23114-4369-00: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-166-9276
Nut And Bolt Locking Plate

121669276
23290-141000.030: RNCC: 2 | RNVC: 2
23290-141000.030: RNCC: 3 | RNVC: 2
23290-141000-030: RNCC: 5 | RNVC: 9
23290-141000.030: RNCC: 5 | RNVC: 9
23290-141000.030: RNCC: 5 | RNVC: 9

6 Nov 1976

5340-12-315-1902
Double Angle Bracket

123151902
6202953040: RNCC: 3 | RNVC: 2
620 295 30 40: RNCC: 5 | RNVC: 2

28 Sep 1988

5340-12-145-6917
Nut And Bolt Locking Plate

121456917
3129940330: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-162-6112
Dust And Moisture Seal Protective Cap

121626112
5835-172.005: RNCC: 3 | RNVC: 2
H38-3543-50: RNCC: 5 | RNVC: 2
C40105-A4-C8: RNCC: 5 | RNVC: 2
C40105A4C8: RNCC: 5 | RNVC: 2
RELANT4T8: RNCC: 5 | RNVC: 2
5835-172-005: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-195-8061
Double Angle Bracket

121958061
160-24430-19: RNCC: 3 | RNVC: 2
160-24430-19: RNCC: 5 | RNVC: 9

19 Apr 1983

5340-12-316-9020
Butt Hinge

123169020
42179-17030.02: RNCC: 2 | RNVC: 2
42179-17030.02: RNCC: 3 | RNVC: 2

22 Feb 1989

5340-12-335-7591
Loop Clamp

123357591
MCC-1S: RNCC: 3 | RNVC: 2

14 Sep 1994

5340-12-702-2101
Mounting Plate

127022101
VG95211-ML-127022101: RNCC: 2 | RNVC: 2
30.7216.07: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-702-9384
Dust And Moisture Seal Protective Cap

127029384
VG95211-ML-127029384: RNCC: 2 | RNVC: 2
062.09.1020: RNCC: 3 | RNVC: 2
0501030075399: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-183-3261
Metal Runner

121833261
56-0049-200-03: RNCC: 3 | RNVC: 2

3 Apr 1980

5340-12-321-3221
Electrical-Mechanical Equipment Post

123213221
7068-41000-003-2: RNCC: 3 | RNVC: 2

4 May 1990

5340-12-196-1299
Nonmetallic Bumper

121961299
81155-80X50NO17240.N: RNCC: 3 | RNVC: 2
80X50NO017240: RNCC: 5 | RNVC: 2
80X50N017240: RNCC: 5 | RNVC: 2
80X50N017240: RNCC: 5 | RNVC: 2
80X50NO17240: RNCC: 5 | RNVC: 2

1 Jun 1983

5340-12-326-5646
Catch Strike

123265646
V18L13-2-3AC: RNCC: 3 | RNVC: 2

8 Oct 1991

Load More Results