What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 11 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 11 of 178

5340-12-303-3669
Rod End Clevis

123033669
1809034201: RNCC: 3 | RNVC: 2
0002522614: RNCC: 5 | RNVC: 2

18 Mar 1985

5340-12-010-5890

5340-12-339-7659
Nonmetallic Bumper

123397659
8400211400: RNCC: 3 | RNVC: 2
84002 11400: RNCC: 5 | RNVC: 9

15 Jan 1996

5340-12-391-4064
Rod End Clevis

123914064
M5537092020600: RNCC: 3 | RNVC: 2

11 Mar 2013

5340-12-360-9946
Mounting Bracket

123609946
0853 9350.002: RNCC: 3 | RNVC: 2

6 Aug 2003

5340-12-341-9896
Angle Bracket

123419896
03938200: RNCC: 3 | RNVC: 2

27 Nov 1996

5340-12-345-6324
Mounting Plate

123456324
5551880639: RNCC: 3 | RNVC: 2

7 Apr 1998

5340-12-367-3221
Mortise Latch

123673221
211-9201: RNCC: 3 | RNVC: 2

4 Aug 2005

5340-12-377-2365
Access Cover

123772365
0419 9252: RNCC: 3 | RNVC: 2

18 Dec 2008

5340-12-164-4550
Retaining Strap

121644550
4039950122: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-177-8933
Nonmetallic Bumper

121778933
4021590684: RNCC: 3 | RNVC: 2

7 Mar 1979

5340-12-187-1773
Dust And Moisture Seal Protective Cap

121871773
200Z24X18: RNCC: 3 | RNVC: 2
200241800: RNCC: 5 | RNVC: 2
GPN200,Z24X18: RNCC: 5 | RNVC: 2
GPN200Z24X18: RNCC: 5 | RNVC: 2
Z24X18: RNCC: 5 | RNVC: 2
Z24X18GPN200: RNCC: 5 | RNVC: 2
GPN200Z24X18: RNCC: 5 | RNVC: 2
Z24X18: RNCC: 5 | RNVC: 2

9 Mar 1981

5340-12-180-6643
Access Cover

121806643
0287 6841: RNCC: 3 | RNVC: 2
2876841: RNCC: 5 | RNVC: 2
2876841ED0704-78: RNCC: 5 | RNVC: 2

26 Sep 1979

5340-12-337-9553
Mounting Bracket

123379553
4602201: RNCC: 3 | RNVC: 2
EZ46022: RNCC: 5 | RNVC: 2

4 May 1995

5340-12-356-9392
Access Cover

123569392
4035474: RNCC: 3 | RNVC: 2

18 Apr 2002

5340-12-175-1858
Double Angle Bracket

121751858
02513787: RNCC: 3 | RNVC: 2
2513787EE5091-29: RNCC: 5 | RNVC: 2

30 Aug 1978

5340-12-392-2125
Mechanical Stop

123922125
DW 410 399 AE: RNCC: 3 | RNVC: 2
DW 410 399 AE: RNCC: 5 | RNVC: 2

16 May 2013

5340-12-325-4185
Rod End Connector

123254185
8377207: RNCC: 3 | RNVC: 2

5 Jun 1991

5340-12-307-1061
Dust And Moisture Seal Protective Plug

123071061
3818110618: RNCC: 3 | RNVC: 2

9 May 1986

5340-12-344-4474
Multiple Angle Bracket

123444474
P-296820-045: RNCC: 3 | RNVC: 2
P296820-045: RNCC: 5 | RNVC: 2

28 Oct 1997

5340-12-300-9903
Nut And Bolt Locking Plate

123009903
P-855992-001: RNCC: 3 | RNVC: 2
P855992-001: RNCC: 5 | RNVC: 2

15 Sep 1984

5340-12-311-3084
Mending Plate

123113084
P-244239-019: RNCC: 3 | RNVC: 2
P244239-019: RNCC: 5 | RNVC: 2

14 Aug 1987

5340-12-129-9211
Antipilferage Seal Locking Wire

121299211
DIN1367-0,5-0,3-STZN-200MM LANG: RNCC: 2 | RNVC: 2
14412: RNCC: 3 | RNVC: 2
40021500: RNCC: 5 | RNVC: 2
3209885171: RNCC: 5 | RNVC: 2
0,5-0,3DIN1367-STZN LAENGE 200MM: RNCC: 5 | RNVC: 2
0-5-0-3DIN1367STZNLAENGE200MM: RNCC: 5 | RNVC: 2
1-1X0-5X200DIN1367VZKVP100ST: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-188-8687
Dust And Moisture Seal Protective Plug

121888687
0637 510 335: RNCC: 3 | RNVC: 2
41.4911-2700.0: RNCC: 5 | RNVC: 2
14.5ATE N 144 90: RNCC: 5 | RNVC: 2
41-4911-2700-0: RNCC: 5 | RNVC: 2
41491127000: RNCC: 5 | RNVC: 9

5 Aug 1981

5340-12-303-5823
Double Angle Bracket

123035823
P-295439-055: RNCC: 3 | RNVC: 2
P295439-055: RNCC: 5 | RNVC: 2

10 Apr 1985

5340-12-306-1069
Nonmetallic Bumper

123061069
P-525426-013: RNCC: 3 | RNVC: 2
P525426-013: RNCC: 5 | RNVC: 2

28 Jan 1986

5340-12-317-2261
Casement Fastener

123172261
3070-7302-11-00: RNCC: 3 | RNVC: 2
307-7302-11-00: RNCC: 5 | RNVC: 2

17 Mar 1989

5340-12-332-5013
Handwheel

123325013
VG85080-D-100X12: RNCC: 2 | RNVC: 2
05-00-020-13-01B: RNCC: 5 | RNVC: 2
05-00-020-13-01-B: RNCC: 5 | RNVC: 2

17 Aug 1993

5340-12-149-9106
Resilient Mount

121499106
80708401: RNCC: 3 | RNVC: 2
320-917-B-00.00 TEIL 1: RNCC: 3 | RNVC: 2
320-917-B-00.00 TEIL 1: RNCC: 5 | RNVC: 2
320-917-B-00.00-1: RNCC: 5 | RNVC: 2
845.320-917B0000-1: RNCC: 5 | RNVC: 2
320-917-B-00.00-1: RNCC: 5 | RNVC: 2
320-917B00-00-1: RNCC: 5 | RNVC: 2
320-917B0000-1: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-324-0236
Loop Clamp

123240236
DIN3016-1-D1-50X12-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-D1-50X12-W1-2: RNCC: 3 | RNVC: 2
RSG11.50/12-W1-2: RNCC: 3 | RNVC: 2
9950060116: RNCC: 5 | RNVC: 2
RSGU1-50-12W1: RNCC: 5 | RNVC: 2
RSGU1.50/12: RNCC: 5 | RNVC: 2
RSGU1.50/12-W1: RNCC: 5 | RNVC: 2
RSGU1-50-12W1: RNCC: 5 | RNVC: 2
RSGU1-50-12W1: RNCC: 5 | RNVC: 2
DIN3016-D1-50X12-W1-2: RNCC: 5 | RNVC: 9

16 Jan 1991

5340-12-141-2142
Headless Straight Rod

121412142
730035-3.7: RNCC: 2 | RNVC: 2
730035-3-70AND3-71: RNCC: 5 | RNVC: 9
730035-3-70AND3-71: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-367-3005
Cremone Bolt

123673005
208-9002: RNCC: 3 | RNVC: 2

1 Aug 2005

5340-12-181-5404
Access Cover

121815404
3035 301 026: RNCC: 3 | RNVC: 2
1410096: RNCC: 5 | RNVC: 2
7395-481: RNCC: 5 | RNVC: 2
2170900: RNCC: 5 | RNVC: 2
3035301026: RNCC: 5 | RNVC: 2
8781480: RNCC: 5 | RNVC: 2

30 Nov 1979

5340-12-702-1823
Mounting Bracket

127021823
VG95211-ML-127021823: RNCC: 2 | RNVC: 2
30.7205.70: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-333-1533
Extension Drawer Slide

123331533
546-10005K: RNCC: 3 | RNVC: 2

4 Nov 1993

5340-12-199-2555
Runner

121992555
5802017-000000.20: RNCC: 2 | RNVC: 2
5802017-000000.20: RNCC: 3 | RNVC: 2
5802017-000000.20: RNCC: 5 | RNVC: 9

6 Apr 1984

5340-12-348-5166
Loop Clamp

123485166
DIN3015-LD-2R-16-PP-W1: RNCC: 2 | RNVC: 2
SM216PP-DP-AS: RNCC: 3 | RNVC: 2
RAPR12-216: RNCC: 3 | RNVC: 2

8 Jul 1999

5340-12-370-4178
Angle Bracket

123704178
463-064000.002: RNCC: 3 | RNVC: 2

6 Nov 2006

5340-12-352-8870
Loop Clamp

123528870
RS1.95/20: RNCC: 3 | RNVC: 2
RS1.95/20-W1: RNCC: 5 | RNVC: 2

2 Jan 2001

5340-12-199-1443
Butt Hinge Leaf

121991443
20-8210-052: RNCC: 3 | RNVC: 2

29 Mar 1984

5340-12-146-7059
Retaining Strap

121467059
TW931-2140-113: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-324-7380
Webbing Strap

123247380
79017/026-0800-0200: RNCC: 3 | RNVC: 2
79017/026-800-200: RNCC: 5 | RNVC: 2
79017/026-800-200: RNCC: 5 | RNVC: 9
79017/026-0800-0200: RNCC: 5 | RNVC: 9

20 Mar 1991

5340-12-315-6642
Mounting Bracket

123156642
512214-3409.000: RNCC: 3 | RNVC: 2
512214-3409: RNCC: 5 | RNVC: 2

18 Nov 1988

5340-12-172-7215
Mending Plate

121727215
23290-091105: RNCC: 2 | RNVC: 2
23290-091105: RNCC: 5 | RNVC: 2

14 Feb 1978

5340-12-351-7624
Lock-Release Lever

123517624
160-774020-02: RNCC: 3 | RNVC: 2

21 Aug 2000

5340-12-164-5574
Support Hook

121645574
14022-10030-02: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-351-6208
Mounting Bracket

123516208
J28230068-401: RNCC: 3 | RNVC: 2

9 Aug 2000

5340-12-350-4183
Butt Hinge

123504183
J52424130-401: RNCC: 3 | RNVC: 2

29 Mar 2000

5340-12-192-2478
Loop Clamp

121922478
PAN4263-18: RNCC: 3 | RNVC: 2

5 Apr 1982

5340-12-304-0922
Access Cover

123040922
6600111-25021: RNCC: 3 | RNVC: 2
6600111-25021: RNCC: 5 | RNVC: 9

11 Jun 1985

5340-12-378-4010
Block Clamp

123784010
ZG 1013-1030112: RNCC: 3 | RNVC: 2

2 Apr 2009

5340-12-191-7154
Strap Fastener Loop

121917154
DIN6406-A25-ST-VERNICKELT: RNCC: 2 | RNVC: 2
A25DIN6406-ST,VERNICKELT: RNCC: 5 | RNVC: 2
A25DIN6406STVERNICKELT: RNCC: 5 | RNVC: 2
0341-25VERNICKELT: RNCC: 5 | RNVC: 9

24 Feb 1982

5340-12-365-5890
Mounting Bracket

123655890
J32320073-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-175-5791
Buckle

121755791
NO PRIMARY REF 12-175-5791: RNCC: 3 | RNVC: 2
02465-26MSMATTBRUENIERT: RNCC: 5 | RNVC: 9

3 Oct 1978

5340-12-370-8963
Mechanic Equipment Hardware Kit

123708963
A70-0004: RNCC: 3 | RNVC: 2

15 Jan 2007

5340-12-355-1398
Section Block Clamp

123551398
J32320154-001: RNCC: 3 | RNVC: 2

15 Oct 2001

5340-12-350-5105
Mending Plate

123505105
160-28233-02: RNCC: 3 | RNVC: 2

6 Apr 2000

5340-12-355-0099
Metallic Bumper

123550099
51041030099: RNCC: 3 | RNVC: 2
51.04103-0099: RNCC: 5 | RNVC: 2

20 Sep 2001

5340-12-350-3302
Double Angle Bracket

123503302
160-28235-05: RNCC: 3 | RNVC: 2

16 Mar 2000

5340-12-151-7035
Spring Tension Clip

121517035
160-73311-07: RNCC: 3 | RNVC: 2
160-73311-07: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-198-4340
Angle Bracket

121984340
5802024-3040: RNCC: 2 | RNVC: 2
5802024-3040: RNCC: 3 | RNVC: 2
5802024-3040: RNCC: 5 | RNVC: 9

27 Jan 1984

5340-12-337-4276
Lock-Release Lever

123374276
6040036: RNCC: 3 | RNVC: 2
6040 036-LINKS: RNCC: 5 | RNVC: 2

2 Mar 1995

5340-12-320-6573
Spring Tension Clip

123206573
LP818-522: RNCC: 3 | RNVC: 2
13721337105: RNCC: 5 | RNVC: 2

5 Feb 1990

5340-12-390-2062
Retaining Strap

123902062
42-14006-000: RNCC: 3 | RNVC: 2

17 Oct 2012

5340-12-302-8317
Angle Bracket

123028317
4900123-2100.06: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-12-166-8844
Retaining Strap

121668844
6L3821-005-708319: RNCC: 3 | RNVC: 2

27 Oct 1976

5340-12-305-5102
Clamp Bolt Assembly

123055102
PAN6623-01: RNCC: 3 | RNVC: 2

15 Nov 1985

5340-12-336-1179
Manual Control Lever

123361179
C26361-K1788-C60: RNCC: 3 | RNVC: 2

26 Oct 1994

5340-12-191-2660
Butt Hinge Leaf

121912660
23114-0480.05: RNCC: 2 | RNVC: 2
23114-0480.05: RNCC: 3 | RNVC: 2
23114-0480.05: RNCC: 5 | RNVC: 9
23114-0480.05: RNCC: 5 | RNVC: 9

20 Jan 1982

5340-12-175-5803
Retaining Strap

121755803
23290-063015.009: RNCC: 2 | RNVC: 2
23290-063015-009: RNCC: 5 | RNVC: 9

3 Oct 1978

5340-12-195-9403
Retaining Strap

121959403
1003178: RNCC: 3 | RNVC: 2
602001277: RNCC: 5 | RNVC: 2
604-16MM: RNCC: 5 | RNVC: 2

4 May 1983

5340-12-338-7727
Mounting Bracket

123387727
424-G406-0001: RNCC: 3 | RNVC: 2

24 Aug 1995

5340-12-189-1827
Mounting Bracket

121891827
23111-3386.00: RNCC: 2 | RNVC: 2
23111-3386.00: RNCC: 3 | RNVC: 2
1119489: RNCC: 5 | RNVC: 9
23111-3386.00: RNCC: 5 | RNVC: 9
23111-3386-00: RNCC: 5 | RNVC: 9

9 Sep 1981

5340-12-300-7362
Angle Bracket

123007362
5801997-174000.00: RNCC: 2 | RNVC: 2
5801997-174000.00: RNCC: 3 | RNVC: 2

25 Aug 1984

5340-12-344-5914
Butt Hinge Leaf

123445914
J5282039-402: RNCC: 3 | RNVC: 2

12 Nov 1997

5340-12-348-5155
Webbing Strap

123485155
6700024-202800.01: RNCC: 2 | RNVC: 2
6700024-202800.01: RNCC: 3 | RNVC: 2

8 Jul 1999

5340-12-384-6531
Stand Base

123846531
33-262-200: RNCC: 3 | RNVC: 2

16 Mar 2011

5340-12-152-5479
Catch Strike

121525479
7101-11-103-09: RNCC: 3 | RNVC: 2
161433803: RNCC: 5 | RNVC: 2
7101-11-103-09: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-169-3135
Electrical-Mechanical Equipment Post

121693135
VG95148B7XM4X25-AL: RNCC: 2 | RNVC: 2
VG95148B7XM4X25-AL: RNCC: 3 | RNVC: 2
MB0332477: RNCC: 3 | RNVC: 2
ZXD11022-25: RNCC: 5 | RNVC: 2
211.03.00.018: RNCC: 5 | RNVC: 2

4 May 1977

5340-12-134-7148
Spring Tension Clip

121347148
REA01-453: RNCC: 3 | RNVC: 2
REA01-453: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-376-7225
Hand Crank

123767225
204574: RNCC: 3 | RNVC: 2
4.248.33.0071: RNCC: 5 | RNVC: 2

31 Oct 2008

5340-12-352-4973
Mounting Bracket

123524973
521910-970141.000.0: RNCC: 2 | RNVC: 2
521910-970141.000.0: RNCC: 3 | RNVC: 2
1271545: RNCC: 5 | RNVC: 2

22 Nov 2000

5340-12-372-6867
Access Cover

123726867
8800351876: RNCC: 3 | RNVC: 2

13 Aug 2007

5340-12-186-3832
Angle Bracket

121863832
3557378: RNCC: 3 | RNVC: 2
3557378: RNCC: 5 | RNVC: 2

23 Dec 1980

5340-12-316-6745
Dust And Moisture Seal Protective Cap

123166745
5800777-8620: RNCC: 2 | RNVC: 2
5800777-8620: RNCC: 3 | RNVC: 2

1 Feb 1989

5340-12-359-0461
Webbing Strap

123590461
4357927396: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-358-8740
Multiple Angle Bracket

123588740
5400051-822122.00: RNCC: 2 | RNVC: 2
5400051-822122.00: RNCC: 3 | RNVC: 2

25 Nov 2002

5340-12-316-7191
Angle Bracket

123167191
2300035-230330.07: RNCC: 2 | RNVC: 2
2300035-230330.07: RNCC: 5 | RNVC: 9
2300035-230330.07: RNCC: 5 | RNVC: 9

7 Feb 1989

5340-12-393-1484
Angle Bracket

123931484
120D121000.010.0: RNCC: 3 | RNVC: 2

14 Aug 2013

5340-12-309-2868
Double Angle Bracket

123092868
81.42940.5085: RNCC: 3 | RNVC: 2

9 Jan 1987

5340-12-193-3173
Nonmetallic Bumper

121933173
281 121 365: RNCC: 3 | RNVC: 2
281121365: RNCC: 5 | RNVC: 2

12 Jul 1982

5340-12-346-0045
Rod End Clevis

123460045
3.601.9.681.001.4: RNCC: 3 | RNVC: 9
1202 8551: RNCC: 5 | RNVC: 2

28 May 1998

5340-12-312-4581
Rubber Bumper

123124581
1 76 802: RNCC: 3 | RNVC: 9
176802: RNCC: 3 | RNVC: 9

8 Jan 1988

5340-12-341-3256
Resilient Mount

123413256
6.000.9.703.011.5: RNCC: 3 | RNVC: 9
1215 0481: RNCC: 5 | RNVC: 2
12150481KE0134-48: RNCC: 5 | RNVC: 2
6.000.9.703.011.5: RNCC: 5 | RNVC: 2
6.000.9.703.011.5: RNCC: 5 | RNVC: 2
DIN95362-C-NR55ST SETZMUTTER M8: RNCC: 5 | RNVC: 9
6.000.9.703.010.5: RNCC: 5 | RNVC: 9

23 Aug 1996

5340-12-306-0773
Strap Hinge

123060773
3147200337: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-380-1737
Mounting Bracket

123801737
S288M3012101: RNCC: 3 | RNVC: 2

2 Oct 2009

5340-12-192-5014
Electrical-Mechanical Equipment Post

121925014
7820211951: RNCC: 3 | RNVC: 2
78202 11951: RNCC: 5 | RNVC: 9

29 Apr 1982

5340-12-392-2119
Mechanical Stop

123922119
DW ZDC 180 BA: RNCC: 3 | RNVC: 2
DW ZDC 180 BA: RNCC: 5 | RNVC: 2

16 May 2013

5340-12-360-8723
Access Cover

123608723
15785001: RNCC: 3 | RNVC: 2

18 Jul 2003

5340-12-314-4316
Access Cover

123144316
4253320233: RNCC: 3 | RNVC: 2
425 332 02 33: RNCC: 5 | RNVC: 2

6 Jul 1988

5340-12-323-5165
Retaining Strap

123235165
6010782041: RNCC: 3 | RNVC: 2

4 Dec 1990

5340-12-351-8428
Snap-In Plain Standoff

123518428
10063-500010: RNCC: 3 | RNVC: 2
10063-500010: RNCC: 5 | RNVC: 9

1 Sep 2000

5340-12-327-0818
Angle Bracket

123270818
5801984-982300.017.0: RNCC: 2 | RNVC: 2
5801984-982300.017.0: RNCC: 3 | RNVC: 2

28 Nov 1991

5340-12-307-2440
Lock-Release Lever

123072440
RP988572: RNCC: 3 | RNVC: 2

26 May 1986

5340-12-388-6921
Webbing Strap

123886921
10199-186530.000.0: RNCC: 2 | RNVC: 2
10199-186530.000.0: RNCC: 3 | RNVC: 2

16 Apr 2012

5340-12-308-5161
Webbing Strap

123085161
5802017-708202.00: RNCC: 2 | RNVC: 2
5802017-708202.00: RNCC: 3 | RNVC: 2
322767: RNCC: 3 | RNVC: 2
19046: RNCC: 5 | RNVC: 2

20 Oct 1986

5340-12-393-8225
Section Block Clamp

123938225
T290M2202284: RNCC: 3 | RNVC: 2

15 Oct 2013

5340-12-378-0069
Rim Lock Set

123780069
504125466: RNCC: 3 | RNVC: 2

4 Mar 2009

5340-12-378-0869
Mending Plate

123780869
5554791: RNCC: 3 | RNVC: 2

11 Mar 2009

5340-12-188-1712
Nonmetallic Bumper

121881712
1112910086: RNCC: 3 | RNVC: 2

10 Jun 1981

5340-12-179-5065
Platte

121795065
431881203: RNCC: 3 | RNVC: 2

4 Jul 1979

5340-12-308-1095
Loop Clamp

123081095
1414765075: RNCC: 3 | RNVC: 2
201390000006: RNCC: 5 | RNVC: 2
20 1390 00 00 06: RNCC: 5 | RNVC: 2
201390000006: RNCC: 5 | RNVC: 2
0405769.0000: RNCC: 5 | RNVC: 2
201390000006: RNCC: 5 | RNVC: 2

3 Sep 1986

5340-12-390-0597
Manual Control Lever

123900597
120D990802.000.0: RNCC: 2 | RNVC: 2
120D990802.000.0: RNCC: 3 | RNVC: 2

28 Sep 2012

5340-12-303-8276
Webbing Strap

123038276
183885537A: RNCC: 3 | RNVC: 2
183885537: RNCC: 5 | RNVC: 9

6 May 1985

5340-12-337-3635
Spring Tension Clip

123373635
81976400227: RNCC: 3 | RNVC: 2
81.97640.0227: RNCC: 5 | RNVC: 2

21 Feb 1995

5340-12-189-7533
Rod End Clevis

121897533
3002EHD1022002: RNCC: 3 | RNVC: 2

21 Oct 1981

5340-12-388-1989
Access Cover

123881989
1030124-206100.001.0: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-12-360-9335
Mounting Bracket

123609335
12850102: RNCC: 3 | RNVC: 2

25 Jul 2003

5340-12-366-0758
Dust And Moisture Seal Protective Cap-Plug

123660758
610U20RAL3000: RNCC: 3 | RNVC: 2

7 Mar 2005

5340-12-159-5060
Dust And Moisture Seal Protective Cap-Plug

121595060
610U29: RNCC: 3 | RNVC: 2
GPN610U29: RNCC: 5 | RNVC: 2
909734187: RNCC: 5 | RNVC: 2
9560111280: RNCC: 5 | RNVC: 2
GPN610U29: RNCC: 5 | RNVC: 2
610002900: RNCC: 5 | RNVC: 9
GPN610,U29: RNCC: 5 | RNVC: 9
U29: RNCC: 5 | RNVC: 9
U29GPN610: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-186-5015
Nonmetallic Bumper

121865015
344012250: RNCC: 3 | RNVC: 2

9 Jan 1981

5340-12-161-2526
Butt Hinge Leaf

121612526
160-72098: RNCC: 3 | RNVC: 2
160-72098: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-322-1000
Angle Bracket

123221000
42207593: RNCC: 3 | RNVC: 2
42207593EE5013-61: RNCC: 5 | RNVC: 2

24 Jul 1990

5340-12-091-3392

5340-12-151-1324
Mending Plate

121511324
521D25009: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-321-9652
Dust And Moisture Seal Protective Plug

123219652
6211410019: RNCC: 3 | RNVC: 2

12 Jul 1990

5340-12-377-9330
Dust And Moisture Seal Protective Plug

123779330
98427035: RNCC: 3 | RNVC: 2
98427035: RNCC: 5 | RNVC: 2

26 Feb 2009

5340-12-329-3570
Access Cover

123293570
600A138: RNCC: 3 | RNVC: 2

12 Aug 1992

5340-12-321-4120
Manual Control Lever

123214120
03906600: RNCC: 3 | RNVC: 2

16 May 1990

5340-12-385-9220
Bow Handle

123859220
DF 407 322 AR: RNCC: 3 | RNVC: 2

21 Jul 2011

5340-12-334-9362
Nonmetallic Bumper

123349362
52.0099.763.02: RNCC: 2 | RNVC: 2
52.0099.763.02: RNCC: 3 | RNVC: 2

5 Jul 1994

5340-12-147-1015
Utility Resilient Mount

121471015
514K02715: RNCC: 3 | RNVC: 2
8392230012: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-186-6165
Rod End Clevis

121866165
4-84981: RNCC: 3 | RNVC: 2

21 Jan 1981

5340-12-351-7761
Retaining Clip

123517761
N/W/100-306/4+7: RNCC: 3 | RNVC: 2

22 Aug 2000

5340-12-161-4283
Rod End Clevis

121614283
100332-16000.36: RNCC: 2 | RNVC: 2
100332-16000-36: RNCC: 5 | RNVC: 2
100332-16000.36: RNCC: 5 | RNVC: 2
100332-16000-36: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-317-7551
Plain Solid Disk

123177551
4/0408/7641/2: RNCC: 3 | RNVC: 2

9 May 1989

5340-12-190-0604
Dust And Moisture Seal Protective Cap

121900604
5991920: RNCC: 3 | RNVC: 2

5 Nov 1981

5340-12-341-5880
Turnbuckle Body

123415880
PAN5170-08-045: RNCC: 3 | RNVC: 2

26 Sep 1996

5340-12-701-9427
Rod End Clevis

127019427
VG95211-ML-127019427: RNCC: 2 | RNVC: 2
5.12.0246.0018.98: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-12-324-3283
Mounting Plate

123243283
42 15 01 22 01: RNCC: 3 | RNVC: 2
4215012201: RNCC: 5 | RNVC: 2

6 Feb 1991

5340-12-301-4282
Angle Bracket

123014282
4178398: RNCC: 3 | RNVC: 2

13 Oct 1984

5340-12-379-2951
Mounting Bracket

123792951
88103131: RNCC: 3 | RNVC: 2

10 Jul 2009

5340-12-701-2696
Mounting Bracket

127012696
VG95211-ML-127012696: RNCC: 2 | RNVC: 2
5.12.4805.2050.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-344-1417
Lock Key

123441417
SCHLUESSEL 3524 E: RNCC: 3 | RNVC: 2
SCHLUESSEL NR. 3524 E: RNCC: 5 | RNVC: 2

17 Sep 1997

5340-12-369-7856
Mechanical Stop

123697856
SK872-252240.000.0: RNCC: 3 | RNVC: 2
7083576: RNCC: 5 | RNVC: 2

16 Aug 2006

5340-12-179-2949
Clamping Catch

121792949
V951L04-1X5AF: RNCC: 3 | RNVC: 2
51L1-1X5AA: RNCC: 5 | RNVC: 2

20 Jun 1979

5340-12-187-6298
Electrical-Mechanical Equipment Post

121876298
1218 7952: RNCC: 3 | RNVC: 2
6-226-0-360-006-4: RNCC: 5 | RNVC: 9
12187952: RNCC: 5 | RNVC: 9
6.226.0.360.006.4: RNCC: 5 | RNVC: 9

21 Apr 1981

5340-12-337-0624
Nonmetallic Solid Wheel

123370624
8.1550-07.01: RNCC: 3 | RNVC: 2
8.1550-7.1: RNCC: 5 | RNVC: 2

17 Jan 1995

5340-12-346-1358
Loop Clamp

123461358
3.602.0.977.025.4: RNCC: 3 | RNVC: 9
1204 7000: RNCC: 5 | RNVC: 2

17 Jun 1998

5340-12-318-8579
Mending Plate

123188579
704-122710-905-0: RNCC: 3 | RNVC: 2

22 Aug 1989

5340-12-182-0695
Mounting Bracket

121820695
4768606: RNCC: 3 | RNVC: 2
476.8606: RNCC: 5 | RNVC: 2
5801505-200000-001: RNCC: 5 | RNVC: 9
5801505-200000.001: RNCC: 5 | RNVC: 9

14 Jan 1980

5340-12-191-6112
Spring Tension Clip

121916112
13 129: RNCC: 3 | RNVC: 2
0004760336: RNCC: 5 | RNVC: 2
02-2827: RNCC: 5 | RNVC: 2
721 1 28 047 1: RNCC: 5 | RNVC: 9

16 Feb 1982

5340-12-195-3663
Lock-Release Lever

121953663
C22234-A1000-B37: RNCC: 3 | RNVC: 2
C22234A1000B37: RNCC: 5 | RNVC: 2

15 Feb 1983

5340-12-388-3857
Mounting Bracket

123883857
3.602.9.637.164.5: RNCC: 3 | RNVC: 2

16 Mar 2012

5340-12-183-7212
Dust And Moisture Seal Protective Plug

121837212
CU 402 508 B: RNCC: 2 | RNVC: 2
CU 402 508 B: RNCC: 3 | RNVC: 2
CU402508B: RNCC: 5 | RNVC: 2
CU 402 508 B: RNCC: 5 | RNVC: 2
CU402508B: RNCC: 5 | RNVC: 2
CU 402 508 B: RNCC: 5 | RNVC: 2
CU402508B: RNCC: 5 | RNVC: 2

15 May 1980

5340-12-349-6410
Mounting Bracket

123496410
61132306462: RNCC: 3 | RNVC: 2
61 13 2 306 462: RNCC: 5 | RNVC: 2

13 Dec 1999

5340-12-335-7792
Butt Hinge

123357792
2782-365310.007.0: RNCC: 2 | RNVC: 2
2782-365310.007.0: RNCC: 3 | RNVC: 2

15 Sep 1994

5340-12-129-4972
Schluessel

121294972
BM200: RNCC: 3 | RNVC: 2
0007660506: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-302-2900
Loop Clamp

123022900
873-310000-001-0: RNCC: 3 | RNVC: 2
873-310000-001-0: RNCC: 5 | RNVC: 9

14 Dec 1984

5340-12-323-7586
Bail Handle

123237586
0.040.200.0: RNCC: 3 | RNVC: 2

13 Dec 1990

5340-12-359-9327
Access Cover

123599327
2500261-187980.003.0: RNCC: 2 | RNVC: 2
2500261-187980.003.0: RNCC: 3 | RNVC: 2

21 Mar 2003

5340-12-387-5005
Angle Bracket

123875005
X51517300004: RNCC: 3 | RNVC: 2

3 Jan 2012

5340-12-319-4608
Angle Bracket

123194608
503087: RNCC: 3 | RNVC: 2

4 Oct 1989

5340-12-326-4552
Mounting Bracket

123264552
3963120040: RNCC: 3 | RNVC: 2

18 Sep 1991

5340-12-347-9179
Spacing Threaded Standoff

123479179
54.0058.570.15: RNCC: 2 | RNVC: 2
54.0058.570.15: RNCC: 3 | RNVC: 2

12 Mar 1999

5340-12-300-3141
Double Angle Bracket

123003141
3098440033: RNCC: 3 | RNVC: 2

24 Jul 1984

5340-12-358-5559
Loop Clamp

123585559
PAN4268-9-4: RNCC: 3 | RNVC: 2

24 Oct 2002

5340-12-348-3141
Turnbuckle

123483141
5300.220.040.000: RNCC: 3 | RNVC: 2

28 May 1999

5340-12-349-7527
Angle Bracket

123497527
A1Z10273204: RNCC: 2 | RNVC: 2
A1Z10273204: RNCC: 3 | RNVC: 2
20350860: RNCC: 5 | RNVC: 2

5 Jan 2000

5340-12-321-6111
Mounting Bracket

123216111
73.9710: RNCC: 3 | RNVC: 2

7 Jun 1990

5340-12-359-7803
Angle Bracket

123597803
2500113-2651: RNCC: 2 | RNVC: 2
2500113-2651: RNCC: 3 | RNVC: 2

10 Mar 2003

5340-12-366-3326
Mounting Plate

123663326
P-085065-765: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-12-321-9746
Access Cover

123219746
4046100288: RNCC: 3 | RNVC: 2

13 Jul 1990

5340-12-320-0764
Strap Fastener Loop

123200764
E0958: RNCC: 3 | RNVC: 2

5 Dec 1989

5340-12-320-4711
Angle Bracket

123204711
068199356: RNCC: 3 | RNVC: 2

18 Jan 1990

5340-12-335-7801
Butt Hinge

123357801
2782-366100.002.0: RNCC: 2 | RNVC: 2
2782-366100.002.0: RNCC: 3 | RNVC: 2

15 Sep 1994

5340-12-387-6960
Air Inlet-Outlet Frame

123876960
GE5012T032: RNCC: 3 | RNVC: 2

25 Jan 2012

5340-12-091-0919

5340-12-326-0763
Extension Drawer Slide

123260763
5801984-981120.000.0: RNCC: 2 | RNVC: 2
5801984-981120.000.0: RNCC: 3 | RNVC: 2
5801984-981120.000.0: RNCC: 5 | RNVC: 2

6 Aug 1991

5340-12-093-7384

5340-12-302-5040
Headless Straight Rod

123025040
STAHLWELLE 20H7X700 MM: RNCC: 3 | RNVC: 2
ARBRE20X700: RNCC: 5 | RNVC: 2
20H7X700: RNCC: 5 | RNVC: 2

9 Jan 1985

5340-12-314-2338
Casement Fastener

123142338
81424035259: RNCC: 3 | RNVC: 2
81.42403.5259: RNCC: 5 | RNVC: 2

17 Jun 1988

5340-12-340-3171
Retaining Band

123403171
3874301340: RNCC: 3 | RNVC: 2

23 Mar 1996

5340-12-185-8274
Expansion Shield

121858274
A5: RNCC: 3 | RNVC: 2
50305: RNCC: 5 | RNVC: 2
2503051: RNCC: 5 | RNVC: 9

1 Nov 1980

5340-12-356-5748
Webbing Strap

123565748
6.373-645.0: RNCC: 3 | RNVC: 2

12 Mar 2002

5340-12-388-1689
Mounting Bracket

123881689
866414101: RNCC: 2 | RNVC: 2
866414101: RNCC: 3 | RNVC: 2

29 Feb 2012

5340-12-326-9873
Mending Plate

123269873
279.614 666: RNCC: 3 | RNVC: 2
1300839-200025: RNCC: 5 | RNVC: 9
279.614 666: RNCC: 5 | RNVC: 9

18 Nov 1991

5340-12-344-0417
Mechanical Stop

123440417
2996.62.48: RNCC: 3 | RNVC: 2
2996.6248: RNCC: 5 | RNVC: 2

3 Sep 1997

5340-12-368-4486
Quick Release Plunger

123684486
EH2203.250: RNCC: 3 | RNVC: 2
2203.250: RNCC: 5 | RNVC: 2
2203250: RNCC: 5 | RNVC: 2

13 Mar 2006

5340-12-352-6337
Mounting Bracket

123526337
1216 3298: RNCC: 3 | RNVC: 2

1 Dec 2000

5340-12-331-0296
Webbing Strap

123310296
52.3109.540.17: RNCC: 2 | RNVC: 2
52.3109.540.17: RNCC: 3 | RNVC: 2

15 Mar 1993

5340-12-374-2508
Access Cover

123742508
3132200: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-373-6138
Access Cover

123736138
424001356: RNCC: 3 | RNVC: 2

21 Nov 2007

5340-12-316-4419
Angle Bracket

123164419
2500213-30.02: RNCC: 2 | RNVC: 2
2500213-30.02: RNCC: 3 | RNVC: 2
2500213-30.02: RNCC: 5 | RNVC: 9

18 Jan 1989

5340-12-168-5111
Access Cover

121685111
1000025-260643: RNCC: 3 | RNVC: 2
1000025-260643: RNCC: 5 | RNVC: 9

18 Mar 1977

5340-12-183-1101
Double Angle Bracket

121831101
42025501: RNCC: 3 | RNVC: 2
42025501KZ5052-81: RNCC: 5 | RNVC: 2

20 Mar 1980

5340-12-323-4007
Electrical-Mechanical Equipment Post

123234007
01TC35286: RNCC: 3 | RNVC: 2

22 Nov 1990

5340-12-334-2290
Mounting Plate

123342290
46532311722: RNCC: 3 | RNVC: 2

14 Apr 1994

5340-12-318-3435
Helical Compression Spring Retainer

123183435
1410506020: RNCC: 3 | RNVC: 2
ASC1507977: RNCC: 5 | RNVC: 9

5 Jul 1989

5340-12-360-8458
Mounting Bracket

123608458
0036.0089: RNCC: 3 | RNVC: 2
FUR31/1: RNCC: 5 | RNVC: 2

16 Jul 2003

5340-12-358-7748
Mounting Bracket

123587748
10006289: RNCC: 3 | RNVC: 2
537161-8289.000: RNCC: 5 | RNVC: 2

13 Nov 2002

5340-12-304-6098
Handwheel

123046098
1200113-221000001: RNCC: 2 | RNVC: 2

5 Aug 1985

5340-12-362-8519
Angle Bracket

123628519
51-76806: RNCC: 3 | RNVC: 2

6 Apr 2004

5340-12-355-5379
Retaining Clip

123555379
4221 359 003: RNCC: 3 | RNVC: 2
15009740: RNCC: 5 | RNVC: 2
4221359003: RNCC: 5 | RNVC: 9

22 Nov 2001

5340-12-355-3802
Latch Bar

123553802
1000-35: RNCC: 3 | RNVC: 2

8 Nov 2001

5340-12-300-4593
Sealing Plug Assembly

123004593
08096: RNCC: 3 | RNVC: 2
08096: RNCC: 5 | RNVC: 9
08096: RNCC: 5 | RNVC: 9

3 Aug 1984

5340-12-306-2490
Coat And Hat Hook

123062490
6210003: RNCC: 3 | RNVC: 2
0008141201: RNCC: 5 | RNVC: 2
33036: RNCC: 5 | RNVC: 2

11 Feb 1986

5340-12-349-5872
Angle Bracket

123495872
81626800093: RNCC: 3 | RNVC: 2
81.62680.0093: RNCC: 5 | RNVC: 2

7 Dec 1999

5340-12-090-5169

5340-12-043-2933

5340-12-364-9813
Fuehrungs- Schiene

123649813
0008430320: RNCC: 3 | RNVC: 2

19 Nov 2004

5340-12-329-3700
Mending Plate

123293700
2904 600 M91: RNCC: 3 | RNVC: 2
395928701: RNCC: 5 | RNVC: 2

13 Aug 1992

5340-12-324-2100
Angle Bracket

123242100
1262 210 002: RNCC: 3 | RNVC: 2
1262210002: RNCC: 5 | RNVC: 9

28 Jan 1991

5340-12-180-7966
Nonmetallic Bumper

121807966
102611: RNCC: 3 | RNVC: 2
102611: RNCC: 5 | RNVC: 2

4 Oct 1979

5340-12-360-7734
Mounting Bracket

123607734
0417 8197: RNCC: 3 | RNVC: 2

8 Jul 2003

5340-12-318-3663
Mounting Bracket

123183663
66.3507.722.02-A001: RNCC: 3 | RNVC: 2
465411: RNCC: 5 | RNVC: 2

7 Jul 1989

5340-12-176-2591
Webbing Strap

121762591
183871489: RNCC: 3 | RNVC: 2

23 Nov 1978

5340-12-136-3579
Rubber Bumper

121363579
269011060047: RNCC: 3 | RNVC: 2
90110647: RNCC: 5 | RNVC: 2
269011060047: RNCC: 5 | RNVC: 2
90110647: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-196-2544
Resilient Mount

121962544
00919800: RNCC: 3 | RNVC: 2

20 Jun 1983

5340-12-330-2006
Helical Compression Spring Retainer

123302006
1000042-195261.01: RNCC: 3 | RNVC: 2

13 Nov 1992

5340-12-040-1053

5340-12-127-8221

5340-12-323-5081
Retaining Clip

123235081
1128094: RNCC: 3 | RNVC: 2
4503.020.00.00.050: RNCC: 5 | RNVC: 2
4503.20.00/50: RNCC: 5 | RNVC: 2
1128094: RNCC: 5 | RNVC: 2

3 Dec 1990

5340-12-310-3616
Nonmetallic Bumper

123103616
2300074-4163.01: RNCC: 2 | RNVC: 2
2300074-4163.01: RNCC: 3 | RNVC: 2
2300074-4163.01: RNCC: 5 | RNVC: 9
2300074-4163.01: RNCC: 5 | RNVC: 9

14 May 1987

5340-12-354-1644
Angle Bracket

123541644
03922900: RNCC: 3 | RNVC: 2

12 Jun 2001

5340-12-322-3577
Access Door

123223577
100013011: RNCC: 3 | RNVC: 2

15 Aug 1990

5340-12-323-6065
Angle Bracket

123236065
01TC35335: RNCC: 3 | RNVC: 2

11 Dec 1990

5340-12-302-2564
Loop Clamp

123022564
6209970490: RNCC: 3 | RNVC: 2
710286: RNCC: 5 | RNVC: 2

12 Dec 1984

5340-12-316-2972
Helical Compression Spring Retainer

123162972
6369213: RNCC: 3 | RNVC: 2

9 Jan 1989

5340-12-392-5905
Mounting Plate

123925905
M2557426623400: RNCC: 3 | RNVC: 2

20 Jun 2013

5340-12-374-6063
Dust And Moisture Seal Protective Cap-Plug

123746063
5411015: RNCC: 3 | RNVC: 2

28 Feb 2008

5340-12-343-3266
Access Cover

123433266
1309.90 11 07 01: RNCC: 3 | RNVC: 2
1309.90110700: RNCC: 5 | RNVC: 2
1309.9200.700.000: RNCC: 5 | RNVC: 2

5 Jun 1997

5340-12-391-9098
Dust And Moisture Seal Protective Plug

123919098
12129557: RNCC: 3 | RNVC: 2
0805450180: RNCC: 5 | RNVC: 2

18 Apr 2013

5340-12-090-2093

5340-12-354-5964
Mounting Bracket

123545964
03.220.18.02.0: RNCC: 3 | RNVC: 2

7 Aug 2001

5340-12-337-2587
Angle Bracket

123372587
70913: RNCC: 3 | RNVC: 2

8 Feb 1995

5340-12-350-0063
Dust And Moisture Seal Protective Plug

123500063
88960020077: RNCC: 3 | RNVC: 2

4 Feb 2000

5340-12-308-5629
Spring Tension Clip

123085629
2705901: RNCC: 3 | RNVC: 2

23 Oct 1986

5340-12-183-2518
Retaining Strap

121832518
51974010002: RNCC: 3 | RNVC: 2
5000611571: RNCC: 5 | RNVC: 2

28 Mar 1980

5340-12-172-1253
Casement Fastener

121721253
N00A0800210103A: RNCC: 3 | RNVC: 2
00008210103A: RNCC: 5 | RNVC: 2
N00A0800210103A: RNCC: 5 | RNVC: 9
00008210103A: RNCC: 5 | RNVC: 9

22 Dec 1977

5340-12-317-6992
Electrical-Mechanical Equipment Post

123176992
3525000345: RNCC: 3 | RNVC: 2

2 May 1989

5340-12-323-7634
Access Cover

123237634
119224: RNCC: 3 | RNVC: 2

14 Dec 1990

5340-12-328-4742
Nonmetallic Solid Wheel

123284742
3.521.130: RNCC: 3 | RNVC: 2

22 May 1992

5340-12-358-2419
Angle Bracket

123582419
61.9802.264.01-A001: RNCC: 2 | RNVC: 2
61.9802.264.01-A001: RNCC: 3 | RNVC: 2

1 Oct 2002

5340-12-321-2858
Access Cover

123212858
9000 2333: RNCC: 3 | RNVC: 2

27 Apr 1990

5340-12-335-1040
Mounting Bracket

123351040
820589262100: RNCC: 3 | RNVC: 2

25 Jul 1994

5340-12-191-8849
Angle Bracket

121918849
81974850163: RNCC: 3 | RNVC: 2
81.97485.0163: RNCC: 5 | RNVC: 2

16 Mar 1982

5340-12-307-7052
Electrical-Mechanical Equipment Post

123077052
RP988993: RNCC: 3 | RNVC: 2

17 Jul 1986

5340-12-337-8202
Spacing Threaded Standoff

123378202
4900008-53.009: RNCC: 3 | RNVC: 2

18 Apr 1995

5340-12-337-7884
Angle Bracket

123377884
201264: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-12-345-2613
Access Cover

123452613
6018684403: RNCC: 3 | RNVC: 2
6018.6844.03: RNCC: 5 | RNVC: 2

18 Feb 1998

5340-12-351-0662
Dust And Moisture Seal Protective Cover

123510662
7802494801: RNCC: 3 | RNVC: 2
78024 94801: RNCC: 5 | RNVC: 9

20 Jun 2000

5340-12-368-9253
Nonmetallic Bumper

123689253
0081846: RNCC: 3 | RNVC: 2

8 May 2006

5340-12-182-3228
Nonmetallic Bumper

121823228
4119870030: RNCC: 3 | RNVC: 2

25 Jan 1980

5340-12-312-8161
Sliding Stay

123128161
1076456: RNCC: 2 | RNVC: 2
1076456: RNCC: 3 | RNVC: 2

10 Feb 1988

5340-12-349-6097
Angle Bracket

123496097
2930.1306: RNCC: 3 | RNVC: 2

8 Dec 1999

5340-12-391-4652
Angle Bracket

123914652
4100095-982119.004.0: RNCC: 2 | RNVC: 2
4100095-982119.004.0: RNCC: 3 | RNVC: 2

13 Mar 2013

5340-12-358-8911
Dust And Moisture Seal Protective Plug

123588911
0099972581: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-12-351-5040
Multiple Angle Bracket

123515040
4616400251: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-322-2525
Retaining Strap

123222525
10040301: RNCC: 2 | RNVC: 2
10040301: RNCC: 3 | RNVC: 2

6 Aug 1990

5340-12-301-7909
Spring Tension Clip

123017909
0009840161: RNCC: 3 | RNVC: 2
A0009840161: RNCC: 5 | RNVC: 2

9 Nov 1984

5340-12-341-6950
Mounting Plate

123416950
501866: RNCC: 3 | RNVC: 2

16 Oct 1996

5340-12-348-6689
Access Door Hinge

123486689
0900301: RNCC: 3 | RNVC: 2

3 Aug 1999

5340-12-351-7857
Dust And Moisture Seal Protective Plug

123517857
270R12030: RNCC: 3 | RNVC: 2
GPN270R12030: RNCC: 5 | RNVC: 2

23 Aug 2000

5340-12-301-9668
Butt Hinge Leaf

123019668
3816800251: RNCC: 3 | RNVC: 2

21 Nov 1984

5340-12-346-7518
Plug Button

123467518
2039.0112: RNCC: 3 | RNVC: 2

7 Sep 1998

5340-12-330-7696
Access Cover

123307696
10341601: RNCC: 3 | RNVC: 2

5 Feb 1993

5340-12-319-8993
Nonmetallic Bumper

123198993
5415701: RNCC: 3 | RNVC: 2

15 Nov 1989

5340-12-355-8967
Angle Bracket

123558967
140 267 1040: RNCC: 3 | RNVC: 2

2 Jan 2002

5340-12-368-0738
Angle Bracket

123680738
7801044392AA: RNCC: 3 | RNVC: 2

1 Dec 2005

5340-12-390-2889
Bumper

123902889
68580100: RNCC: 3 | RNVC: 2

26 Oct 2012

5340-12-314-2037
Mounting Bracket

123142037
272.317 732: RNCC: 2 | RNVC: 2
272.317.732: RNCC: 3 | RNVC: 2
272.317 732: RNCC: 5 | RNVC: 9

16 Jun 1988

5340-12-368-7896
Filler Opening Cap

123687896
GKG25: RNCC: 3 | RNVC: 2
2011277: RNCC: 5 | RNVC: 2

20 Apr 2006

5340-12-366-4943
Mechanical Stop

123664943
272.933.358: RNCC: 3 | RNVC: 2

28 Apr 2005

5340-12-328-7220
Lock-Release Lever

123287220
178424: RNCC: 2 | RNVC: 2
178424: RNCC: 3 | RNVC: 2

18 Jun 1992

5340-12-368-9332
Mounting Bracket

123689332
1902030: RNCC: 3 | RNVC: 2

8 May 2006

5340-12-357-8464
Dust And Moisture Seal Protective Plug

123578464
0009973020: RNCC: 3 | RNVC: 2

1 Aug 2002

5340-12-191-2143
Angle Bracket

121912143
4354290240: RNCC: 3 | RNVC: 2
4354290240: RNCC: 5 | RNVC: 2

19 Jan 1982

5340-12-315-1879
Double Angle Bracket

123151879
3878911114: RNCC: 3 | RNVC: 2
387 891 11 14: RNCC: 5 | RNVC: 2

28 Sep 1988

5340-12-339-2950
Leather Strap

123392950
T41995: RNCC: 3 | RNVC: 2
T41995: RNCC: 5 | RNVC: 9

6 Nov 1995

5340-12-326-1836
Dust And Moisture Seal Protective Plug

123261836
8095 040 118: RNCC: 3 | RNVC: 2
8095 040 118: RNCC: 5 | RNVC: 2
100CP4327: RNCC: 5 | RNVC: 2

15 Aug 1991

5340-12-359-8343
Vent Plug

123598343
2500261-260200.000.0: RNCC: 2 | RNVC: 2
2500261-260200.000.0: RNCC: 3 | RNVC: 2

13 Mar 2003

5340-12-329-3475
Flush Lock

123293475
4040Z-RECHTS: RNCC: 3 | RNVC: 2

8 Aug 1992

5340-12-323-4417
Nonmetallic Bumper

123234417
251411045B: RNCC: 3 | RNVC: 2

26 Nov 1990

5340-12-027-2071

5340-12-092-2964

5340-12-362-7247
Angle Bracket

123627247
SW8103G140: RNCC: 2 | RNVC: 2
SW8103G140: RNCC: 3 | RNVC: 9

24 Mar 2004

5340-12-319-1464
Manual Control Handle

123191464
503441: RNCC: 3 | RNVC: 2

11 Sep 1989

5340-12-349-6077
Strap Hinge Leaf

123496077
T524M1513224: RNCC: 3 | RNVC: 2

8 Dec 1999

5340-12-363-4456
Manual Control Lever

123634456
CBD45426P13: RNCC: 3 | RNVC: 2

17 Jun 2004

5340-12-300-0115
Bridge Clamp

123000115
9617024144: RNCC: 3 | RNVC: 2
0162835: RNCC: 5 | RNVC: 2
162835: RNCC: 5 | RNVC: 9

21 Jun 1984

5340-12-338-3389
Manual Control Lever

123383389
801 624: RNCC: 3 | RNVC: 2

26 Jun 1995

5340-12-306-4851
Helical Compression Spring Seat

123064851
272 343 38 15: RNCC: 3 | RNVC: 2
2723433815: RNCC: 5 | RNVC: 2

4 Mar 1986

5340-12-382-5633
Mounting Plate

123825633
V10551: RNCC: 3 | RNVC: 2
V10551: RNCC: 5 | RNVC: 2

8 Jul 2010

5340-12-195-4090
Catch Strike

121954090
SCHLIESZBLECH FUER 3202 LINKS: RNCC: 3 | RNVC: 2
SCHLIESZBLECHELINKS FUER 3202: RNCC: 5 | RNVC: 2

21 Feb 1983

5340-12-365-0625
Retaining Strap

123650625
6110782641: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-12-363-0520
Angle Bracket

123630520
949959477: RNCC: 3 | RNVC: 2

29 Apr 2004

5340-12-179-5107
Mounting Bracket

121795107
4256891041: RNCC: 3 | RNVC: 2
4256891041: RNCC: 5 | RNVC: 2
4256891041: RNCC: 5 | RNVC: 2

4 Jul 1979

5340-12-365-7338
Butt Hinge

123657338
1056-U19: RNCC: 3 | RNVC: 2

27 Jan 2005

5340-12-365-7077
Mounting Bracket

123657077
9324600235: RNCC: 3 | RNVC: 2

26 Jan 2005

5340-12-335-0249
Strap Hinge

123350249
DIN31211-N19: RNCC: 2 | RNVC: 2
0435718: RNCC: 3 | RNVC: 2

12 Jul 1994

5340-12-334-8130
Mounting Bracket

123348130
52.0099.725.01: RNCC: 2 | RNVC: 2
52.0099.725.01: RNCC: 3 | RNVC: 2

23 Jun 1994

5340-12-307-1741
Sealing Plug Assembly

123071741
1300392-140000: RNCC: 2 | RNVC: 2
279.990191: RNCC: 3 | RNVC: 2
279.990191: RNCC: 5 | RNVC: 9
279.990191: RNCC: 5 | RNVC: 9

20 May 1986

5340-12-307-6218
Lock-Release Lever

123076218
2574301: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-12-325-7312
Dust And Moisture Seal Boot

123257312
3012060157: RNCC: 3 | RNVC: 2

3 Jul 1991

5340-12-351-5944
Retaining Bail

123515944
10063-500700: RNCC: 3 | RNVC: 2
10063-500700: RNCC: 5 | RNVC: 9

7 Aug 2000

5340-12-363-5665
Mounting Plate

123635665
BRR21717: RNCC: 3 | RNVC: 2

2 Jul 2004

5340-12-326-3999
Mending Plate

123263999
01TL30683: RNCC: 3 | RNVC: 2

11 Sep 1991

5340-12-350-4832
Mounting Bracket

123504832
13282401: RNCC: 3 | RNVC: 2

5 Apr 2000

5340-12-350-0074
Flush Lock

123500074
88626806006: RNCC: 3 | RNVC: 2

4 Feb 2000

5340-12-346-7525
Dust And Moisture Seal Protective Plug

123467525
4007.0614: RNCC: 3 | RNVC: 2

7 Sep 1998

5340-12-353-0146
Angle Bracket

123530146
T324M2001206: RNCC: 3 | RNVC: 2

18 Jan 2001

5340-12-360-0050
Mounting Bracket

123600050
9415207841: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-157-9283
Leather Strap

121579283
124676: RNCC: 3 | RNVC: 2
124676: RNCC: 5 | RNVC: 2
LT415: RNCC: 5 | RNVC: 9
LT415: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-332-6755
Angle Bracket

123326755
81974870485: RNCC: 2 | RNVC: 2
81974870485: RNCC: 3 | RNVC: 2
81.97487.0485: RNCC: 5 | RNVC: 2

3 Sep 1993

5340-12-323-8494
Multiple Angle Bracket

123238494
54.2551.901.03: RNCC: 3 | RNVC: 2

27 Dec 1990

5340-12-331-3943
Lock-Release Lever

123313943
U03307: RNCC: 3 | RNVC: 2
U03307: RNCC: 5 | RNVC: 9

3 May 1993

5340-12-300-1206
Access Hole Frame

123001206
AZ9500T925: RNCC: 3 | RNVC: 2
AZ9500T925: RNCC: 5 | RNVC: 9
AZ9500T925: RNCC: 5 | RNVC: 9

5 Jul 1984

5340-12-318-1673
Mounting Bracket

123181673
AFG0348433: RNCC: 3 | RNVC: 2
034843: RNCC: 5 | RNVC: 2

16 Jun 1989

5340-12-328-9602
Mending Plate

123289602
43709629-601: RNCC: 2 | RNVC: 2
43709629-601: RNCC: 3 | RNVC: 2

3 Jul 1992

5340-12-356-5004
Door Button

123565004
200-9365: RNCC: 3 | RNVC: 2

6 Mar 2002

5340-12-308-0350
Plain Solid Disk

123080350
105782: RNCC: 3 | RNVC: 2

22 Aug 1986

5340-12-199-7857
Nut And Bolt Locking Plate

121997857
213.314: RNCC: 3 | RNVC: 2
4641.3400.0601: RNCC: 5 | RNVC: 2

30 May 1984

5340-12-309-8191
Dust And Moisture Seal Protective Cap

123098191
320-997002: RNCC: 3 | RNVC: 2

6 Mar 1987

5340-12-362-4008
Rod End Clevis

123624008
875345: RNCC: 3 | RNVC: 2

17 Feb 2004

5340-12-316-8267
Manual Control Handle

123168267
23111-9431.00: RNCC: 2 | RNVC: 2
23111-9431.00: RNCC: 3 | RNVC: 2
23111-9431.00: RNCC: 5 | RNVC: 9

16 Feb 1989

5340-12-198-0973
Handwheel

121980973
1200096-133200001: RNCC: 2 | RNVC: 2

20 Dec 1983

5340-12-301-6072
Angle Bracket

123016072
2300107-310105: RNCC: 2 | RNVC: 2
2300107-310105: RNCC: 3 | RNVC: 2
2300107-310105: RNCC: 5 | RNVC: 9
2300107-310105: RNCC: 5 | RNVC: 9

26 Oct 1984

5340-12-353-1531
Retaining Strap

123531531
890 999 0412: RNCC: 3 | RNVC: 2

2 Feb 2001

5340-12-332-7302
Mending Plate

123327302
35629357: RNCC: 3 | RNVC: 2
66.3518.237.02-A001: RNCC: 3 | RNVC: 2

13 Sep 1993

5340-12-319-7374
Dust And Moisture Seal Protective Plug

123197374
9630016514: RNCC: 3 | RNVC: 2

30 Oct 1989

5340-12-317-2886
Mounting Bracket

123172886
4312 712 47390: RNCC: 3 | RNVC: 2

28 Mar 1989

5340-12-302-2565
Loop Clamp

123022565
6204920840: RNCC: 3 | RNVC: 2

12 Dec 1984

5340-12-135-9150

5340-12-138-5667

5340-12-347-9841
Assembled Nut Retainer

123479841
1092911: RNCC: 3 | RNVC: 2

22 Mar 1999

5340-12-387-8532
Elastic Strap

123878532
7063020: RNCC: 3 | RNVC: 2

2 Feb 2012

5340-12-186-0354
Dust And Moisture Seal Protective Plug

121860354
WFGS4I: RNCC: 3 | RNVC: 2

25 Nov 1980

5340-12-313-1061
Sliding Stay

123131061
100000673: RNCC: 2 | RNVC: 2
100000673: RNCC: 3 | RNVC: 2

4 Mar 1988

5340-12-360-6023
Angle Bracket

123606023
384.62412: RNCC: 3 | RNVC: 2

13 Jun 2003

5340-12-360-0078
Mounting Bracket

123600078
9415422840: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-360-0347
Manual Control Handle

123600347
8012.33.00: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-316-5874
Dust And Moisture Seal Protective Cap

123165874
PAN3863H05: RNCC: 3 | RNVC: 2

26 Jan 1989

5340-12-380-4816
Bolt And Spacer Kit

123804816
P20584NM: RNCC: 3 | RNVC: 2

3 Nov 2009

5340-12-344-0742
Resilient Mount

123440742
272.334.665: RNCC: 3 | RNVC: 2
272.334 665: RNCC: 5 | RNVC: 9

8 Sep 1997

5340-12-326-0449
Dust And Moisture Seal Protective Cap

123260449
571800028: RNCC: 3 | RNVC: 9

1 Aug 1991

5340-12-347-2994
Tee Hinge

123472994
B-371501: RNCC: 3 | RNVC: 2
371 501: RNCC: 5 | RNVC: 2

24 Nov 1998

5340-12-177-3201
Manual Control Handle

121773201
WW4141410X: RNCC: 3 | RNVC: 9
WW 414 141 -X: RNCC: 5 | RNVC: 2
WW4141410X: RNCC: 5 | RNVC: 2
WW 414 141 -X: RNCC: 5 | RNVC: 9

29 Jan 1979

5340-12-135-6843

5340-12-159-1442
Double Angle Bracket

121591442
AWENTW2668A68: RNCC: 3 | RNVC: 2
AWENTW2668A68: RNCC: 5 | RNVC: 2
AWENTW2668A68: RNCC: 5 | RNVC: 2
AWENTW2668A68: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-389-4403
Electromagnetic Lock

123894403
DL1L-EX-X20(U).10: RNCC: 3 | RNVC: 2

6 Jul 2012

5340-12-169-2830
Retaining Strap

121692830
HS8938-4: RNCC: 3 | RNVC: 2
1355668: RNCC: 5 | RNVC: 2

3 May 1977

5340-12-389-1403
Expansion Shield

123891403
924171: RNCC: 3 | RNVC: 2
07402207: RNCC: 5 | RNVC: 2
924171: RNCC: 5 | RNVC: 2
2500601769: RNCC: 5 | RNVC: 2

30 May 2012

5340-12-368-2919
Dust And Moisture Seal Protective Cap

123682919
6481400: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-12-336-5210
Dust And Moisture Seal Protective Plug

123365210
4961: RNCC: 2 | RNVC: 2
4961: RNCC: 3 | RNVC: 2

22 Nov 1994

5340-12-359-7801
Mounting Bracket

123597801
ZG5200G602: RNCC: 3 | RNVC: 2
ZG5200G602: RNCC: 5 | RNVC: 9

10 Mar 2003

5340-12-348-0892
Loop Clamp

123480892
272.494.929: RNCC: 3 | RNVC: 2
272.494929: RNCC: 5 | RNVC: 9

13 Apr 1999

5340-12-028-3964

5340-12-322-3551
Spring Tension Clip

123223551
4604270234: RNCC: 3 | RNVC: 2

15 Aug 1990

5340-12-366-2965
Spacing Threaded Standoff

123662965
105035: RNCC: 3 | RNVC: 2

6 Apr 2005

5340-12-358-5365
Door Button

123585365
62710222: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-12-359-1108
Spring Tension Clip

123591108
1301251093: RNCC: 3 | RNVC: 2
0008267284: RNCC: 3 | RNVC: 2

18 Dec 2002

5340-12-316-5976
Helical Compression Spring Retainer

123165976
5189394: RNCC: 3 | RNVC: 2

27 Jan 1989

5340-12-022-5114

5340-12-025-1636

5340-12-357-3889
Section Block Clamp

123573889
T290M2003207: RNCC: 3 | RNVC: 2

17 Jun 2002

5340-12-313-9736
Dust And Moisture Seal Protective Cap

123139736
DG022.0204: RNCC: 3 | RNVC: 2

28 May 1988

5340-12-189-7623
Compression Cup

121897623
N00A2001210004A: RNCC: 3 | RNVC: 2
369133574: RNCC: 5 | RNVC: 2
N00A2001210004A: RNCC: 5 | RNVC: 9

21 Oct 1981

5340-12-171-7628
Loop Clamp

121717628
LN9491BK5: RNCC: 2 | RNVC: 2

11 Nov 1977

5340-12-316-2363
Shimmy Damper

123162363
8-19-200-0/280-300-500-A-A: RNCC: 3 | RNVC: 2
8-19-200-0/280-300-500-A-A: RNCC: 3 | RNVC: 2
8-19-200-0/280-300-500-A-A: RNCC: 5 | RNVC: 2
WL321079: RNCC: 5 | RNVC: 9

3 Jan 1989

5340-12-192-3414
Pad Eye

121923414
5800781341: RNCC: 3 | RNVC: 2

15 Apr 1982

5340-12-341-9511
Nonmetallic Bumper

123419511
3873230285: RNCC: 3 | RNVC: 2
387 323 02 85: RNCC: 5 | RNVC: 2

20 Nov 1996

5340-12-356-9277
Access Cover

123569277
8800110032: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-12-300-2123
Retaining Strap

123002123
3199950132: RNCC: 3 | RNVC: 2

14 Jul 1984

5340-12-377-1990
Access Cover

123771990
T524M1229051: RNCC: 3 | RNVC: 2

17 Dec 2008

5340-12-145-5445

5340-12-367-8205
Rod End Clevis

123678205
6251.112.075.018: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-12-391-0388
Mounting Bracket

123910388
2300559-820116.000.0: RNCC: 3 | RNVC: 2

17 Jan 2013

5340-12-329-0310
Access Cover

123290310
4-0453-5037-0: RNCC: 3 | RNVC: 2

10 Jul 1992

5340-12-374-5739
Clamping Catch

123745739
2 0004-408: RNCC: 3 | RNVC: 2
2 0004-408: RNCC: 5 | RNVC: 2

27 Feb 2008

5340-12-387-3542
Bumper

123873542
30 20M8-A: RNCC: 3 | RNVC: 2

1 Dec 2011

5340-12-392-8641
Block Clamp

123928641
120D010011.001.0: RNCC: 2 | RNVC: 2
120D010011.001.0: RNCC: 3 | RNVC: 2

17 Jul 2013

5340-12-386-0147
Access Cover

123860147
10091-192021.000.0: RNCC: 3 | RNVC: 2

29 Jul 2011

5340-12-324-0112
Rod End Clevis

123240112
0115 6225: RNCC: 3 | RNVC: 2
01156225EE8936-09: RNCC: 5 | RNVC: 2
6.1270.01.0.803.4: RNCC: 5 | RNVC: 2

16 Jan 1991

5340-12-375-9130
Dust And Moisture Seal Protective Cap

123759130
0.0.026.80: RNCC: 3 | RNVC: 2

18 Jul 2008

5340-12-368-8196
Bail Handle

123688196
1030010-180760.005.0: RNCC: 3 | RNVC: 2

25 Apr 2006

5340-12-340-0707
Multiple Angle Bracket

123400707
1216 2591: RNCC: 3 | RNVC: 2
6.232.0.982.040.4: RNCC: 5 | RNVC: 9

23 Feb 1996

5340-12-312-2210
Access Cover

123122210
1000093-31000.09.0: RNCC: 2 | RNVC: 2
1000093-31000.09.0: RNCC: 3 | RNVC: 2

4 Dec 1987

5340-12-348-0679
Angle Bracket

123480679
58R059-84419-3: RNCC: 2 | RNVC: 2
58R059-84419-3: RNCC: 3 | RNVC: 2

8 Apr 1999

5340-12-315-1075
Hand Crank

123151075
2300123-970100.000.0: RNCC: 2 | RNVC: 2
2300123-970100.000.0: RNCC: 3 | RNVC: 2

17 Sep 1988

5340-12-307-0874
Nonmetallic Bumper

123070874
12916-2: RNCC: 3 | RNVC: 2

7 May 1986

5340-12-392-7565
Retaining Band

123927565
120D035010.000.0: RNCC: 3 | RNVC: 2

5 Jul 2013

5340-12-328-9882
Webbing Strap

123289882
2300232-972250.000.0: RNCC: 2 | RNVC: 2
2300232-972250.000.0: RNCC: 3 | RNVC: 2

7 Jul 1992

5340-12-159-3441
Bow Handle

121593441
43702977-601: RNCC: 3 | RNVC: 2
277.3: RNCC: 3 | RNVC: 2
2215121027: RNCC: 5 | RNVC: 2
277-3: RNCC: 5 | RNVC: 2
272.305 160: RNCC: 5 | RNVC: 2
43702977-601: RNCC: 5 | RNVC: 9
22151 21027: RNCC: 5 | RNVC: 9
43702977-601: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-390-0581
Access Cover

123900581
DF 200 258 B: RNCC: 3 | RNVC: 2
DF 200 258 B: RNCC: 5 | RNVC: 2

27 Sep 2012

5340-12-310-2946

5340-12-377-4810
Mounting Bracket

123774810
8605001.3.550.05: RNCC: 3 | RNVC: 2
8605001355005: RNCC: 5 | RNVC: 2

19 Jan 2009

5340-12-302-6149
Rubber Bumper

123026149
YK03230864: RNCC: 3 | RNVC: 2
03230864: RNCC: 5 | RNVC: 9
H.B 913SV 1056 1975 03 23 0864: RNCC: 5 | RNVC: 9

17 Jan 1985

5340-12-310-7452
Loop Clamp

123107452
2208528121: RNCC: 3 | RNVC: 2

26 Jun 1987

5340-12-385-4139
Access Cover

123854139
Z=21 707/2: RNCC: 3 | RNVC: 2

31 May 2011

5340-12-334-8658
Nonmetallic Bumper

123348658
80-818167-4: RNCC: 3 | RNVC: 2
80-818167-4: RNCC: 5 | RNVC: 2
ML 044 D: RNCC: 5 | RNVC: 2

29 Jun 1994

5340-12-176-2382
Section Block Clamp

121762382
PAN4273-6: RNCC: 3 | RNVC: 2

15 Nov 1978

5340-12-342-3643
Access Cover

123423643
BHEG 411 211 037: RNCC: 3 | RNVC: 2
DEX228-1: RNCC: 5 | RNVC: 2

28 Jan 1997

5340-12-346-0662
Butt Hinge

123460662
2300232-971050.004.0: RNCC: 2 | RNVC: 2
2300232-971050.004.0: RNCC: 3 | RNVC: 2

5 Jun 1998

5340-12-356-7539
Access Cover

123567539
0001-611100-902-0: RNCC: 3 | RNVC: 2

3 Apr 2002

5340-12-367-9392
Mounting Plate

123679392
10084: RNCC: 3 | RNVC: 2

8 Nov 2005

5340-12-310-2804
Retaining Strap

123102804
1000104-212400.08: RNCC: 3 | RNVC: 2
1000104-212400.08: RNCC: 5 | RNVC: 9

5 May 1987

5340-12-011-5335

5340-12-090-4676

5340-12-358-2636
Dust And Moisture Seal Protective Plug

123582636
3899970586: RNCC: 3 | RNVC: 2

2 Oct 2002

5340-12-319-5058
Mending Plate

123195058
4900059-751180.000.0/3: RNCC: 3 | RNVC: 2
1256109: RNCC: 5 | RNVC: 2

6 Oct 1989

5340-12-308-0540
Butt Hinge

123080540
4014.7201.2: RNCC: 3 | RNVC: 2

26 Aug 1986

5340-12-374-1834
Retaining Strap

123741834
239.71.619: RNCC: 3 | RNVC: 2

28 Jan 2008

5340-12-362-3146
Mounting Bracket

123623146
00.15180.815000: RNCC: 3 | RNVC: 2
00.15180.815000.4: RNCC: 5 | RNVC: 2

5 Feb 2004

5340-12-337-0610
Protection Bellows

123370610
03.130.09.04.0: RNCC: 3 | RNVC: 2

16 Jan 1995

5340-12-181-7761
Nonmetallic Bumper

121817761
34100-8: RNCC: 3 | RNVC: 2
34100-8: RNCC: 3 | RNVC: 9

14 Dec 1979

5340-12-339-5814
Shock Mount Pad

123395814
STP 4 PLY 22: RNCC: 3 | RNVC: 2
STP 2 PLY 22: RNCC: 5 | RNVC: 9

7 Dec 1995

5340-12-358-5358
Metal Grille

123585358
64415727: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-12-317-5038
Retaining Strap

123175038
5050 17 0: RNCC: 3 | RNVC: 9

13 Apr 1989

5340-12-301-2399
Lock-Release Lever

123012399
4179367: RNCC: 3 | RNVC: 2
1210-302: RNCC: 5 | RNVC: 2

29 Sep 1984

5340-12-360-9949
Mounting Bracket

123609949
0853 9350.034: RNCC: 3 | RNVC: 2

6 Aug 2003

5340-12-311-1299
Bail Handle

123111299
3738438441: RNCC: 3 | RNVC: 2

29 Jul 1987

5340-12-093-6751

5340-12-027-0892

5340-12-363-5189
Rod End Clevis

123635189
4279960001: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-12-334-8313
Loop Clamp

123348313
WRSOM0420: RNCC: 3 | RNVC: 2

24 Jun 1994

5340-12-359-6766
Angle Bracket

123596766
2500261-180000.213.0: RNCC: 2 | RNVC: 2
2500261-180000.213.0: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-12-365-8878
Loop Clamp

123658878
DIN3016-1-D1-15X15-W1-2-EPDM: RNCC: 2 | RNVC: 2

16 Feb 2005

5340-12-146-8492
Loop Clamp

121468492
DIN3016-1-E1-19X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-E1-19X15-W1-2: RNCC: 3 | RNVC: 2
RSGU0.19/15: RNCC: 3 | RNVC: 2
9400015019: RNCC: 5 | RNVC: 2
RSGU19-15: RNCC: 5 | RNVC: 2
RSGU19/15: RNCC: 5 | RNVC: 2
DIN3016-E1-19X15-W1-2: RNCC: 5 | RNVC: 9
VG95931-E19X15-W1: RNCC: 5 | RNVC: 9
VG95931E19X15W1: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-315-6348
Handwheel

123156348
NO PRIMARY REF 12-315-6348: RNCC: 3 | RNVC: 2
DIN956-125X11-V-B-MS: RNCC: 5 | RNVC: 9
DIN956-125X11-V-B-MS: RNCC: 5 | RNVC: 9

15 Nov 1988

5340-12-130-0605
Support Hook

121300605
3460061: RNCC: 3 | RNVC: 2
AH6: RNCC: 3 | RNVC: 2
204 006 1: RNCC: 3 | RNVC: 9
03044: RNCC: 5 | RNVC: 2
0H6: RNCC: 5 | RNVC: 9
58121-5: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-144-9608
Butt Hinge

121449608
LN9172KFF500: RNCC: 2 | RNVC: 2
30X500LN9172: RNCC: 5 | RNVC: 2
LN9172FF500: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-193-9143
Butt Hinge Leaf

121939143
4216710152: RNCC: 3 | RNVC: 2

13 Sep 1982

5340-12-377-9978
Mounting Bracket

123779978
504097971: RNCC: 3 | RNVC: 2

4 Mar 2009

5340-12-198-1711
Key Blank

121981711
R900006980: RNCC: 3 | RNVC: 2
006980: RNCC: 5 | RNVC: 9

27 Dec 1983

5340-12-194-0925
Angle Bracket

121940925
5548640: RNCC: 3 | RNVC: 2
554.8640: RNCC: 5 | RNVC: 2

30 Sep 1982

5340-12-044-5846

5340-12-318-9544
Loop Clamp

123189544
DIN3015-S-KP-2-G-25-PP: RNCC: 2 | RNVC: 2
HRGS2KP25PP: RNCC: 3 | RNVC: 2
RCPG-225: RNCC: 3 | RNVC: 2
4025PPH: RNCC: 3 | RNVC: 2
RCPG-225: RNCC: 5 | RNVC: 2
DIN3015SKP2G-25PP: RNCC: 5 | RNVC: 2
4025PPH: RNCC: 5 | RNVC: 2
VG95934KL2-25-PP: RNCC: 5 | RNVC: 9

28 Aug 1989

5340-12-185-5336
Electrical-Mechanical Equipment Post

121855336
1000093-26000.04.0: RNCC: 2 | RNVC: 2
1000093-26000.04.0: RNCC: 3 | RNVC: 2
1000093-26000-04-0: RNCC: 5 | RNVC: 2
1000093-26000-04-0: RNCC: 5 | RNVC: 9

14 Oct 1980

5340-12-701-6179
Mounting Bracket

127016179
VG95211-ML-127016179: RNCC: 2 | RNVC: 2
5.12.7010.1810.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-330-7207
Retaining Strap

123307207
80.13.041-4: RNCC: 3 | RNVC: 2
6.393-304.0: RNCC: 5 | RNVC: 2
6.393-304: RNCC: 5 | RNVC: 9

1 Feb 1993

5340-12-320-9890
Mounting Bracket

123209890
2300269-183023.000.0: RNCC: 2 | RNVC: 2
790-12.33.000-25: RNCC: 3 | RNVC: 2

14 Mar 1990

5340-12-326-4238
Resilient Mount

123264238
KOMBIELEMENTLMITPUFFER50X30-40SH: RNCC: 3 | RNVC: 2
137994-04040: RNCC: 5 | RNVC: 2
25333A-L-BSTN4090: RNCC: 5 | RNVC: 2
KOMBI-ELEMENTLMIT PUFFER50X30-40: RNCC: 5 | RNVC: 2

12 Sep 1991

5340-12-326-8694
Retaining Strap

123268694
2300109-181066.000.0: RNCC: 2 | RNVC: 2
2300109-181066.000.0: RNCC: 5 | RNVC: 9

4 Nov 1991

5340-12-178-6246
Mending Plate

121786246
81254410150: RNCC: 3 | RNVC: 2
23245-061007-002-0: RNCC: 5 | RNVC: 9
23245-061007.002.0: RNCC: 5 | RNVC: 9

7 May 1979

5340-12-343-8275
Manual Control Handle

123438275
4.1875-01: RNCC: 3 | RNVC: 2
1438121: RNCC: 5 | RNVC: 2
41875-01: RNCC: 5 | RNVC: 2

4 Aug 1997

5340-12-311-6659
Rod End Clevis

123116659
1700037.01.23: RNCC: 2 | RNVC: 2
5-835-0045: RNCC: 5 | RNVC: 2
1700037.01.23: RNCC: 5 | RNVC: 9

2 Oct 1987

5340-12-381-2721
Retaining Bail

123812721
60005805: RNCC: 3 | RNVC: 2

27 Jan 2010

5340-12-372-2139
Pipe Hanger

123722139
20346: RNCC: 3 | RNVC: 2

27 Jun 2007

5340-12-372-1659
Buckle

123721659
03329: RNCC: 3 | RNVC: 2

22 Jun 2007

5340-12-372-1455
Section Block Clamp

123721455
S322I30A1204: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-12-091-7281

5340-12-302-8330
Angle Bracket

123028330
4900123-3200.06: RNCC: 2 | RNVC: 2
4900123-3200.06: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-12-389-0683
Expansion Shield

123890683
NO PRIMARY REF 12-389-0683: RNCC: 3 | RNVC: 2
924184: RNCC: 5 | RNVC: 2
924184: RNCC: 5 | RNVC: 2

23 May 2012

5340-12-188-3088
Dust And Moisture Seal Protective Plug

121883088
11.01668.4.3: RNCC: 3 | RNVC: 2
11-01668: RNCC: 5 | RNVC: 2
110166800: RNCC: 5 | RNVC: 2

29 Jun 1981

5340-12-167-1692
Retaining Strap

121671692
DIN3016-1-F1-25,4X15-W5-CR: RNCC: 2 | RNVC: 2
DIN3016-F1-25,4X15-W5: RNCC: 3 | RNVC: 2
RSGU2.25,4/15-W5: RNCC: 3 | RNVC: 2
RSGU2.25,4/15-1.4571: RNCC: 5 | RNVC: 2
DIN3016-F1-25,4X15-W5: RNCC: 5 | RNVC: 9
RSGU1200-25-4-15-1-4571: RNCC: 5 | RNVC: 9
VG95931-F25,4X15-W5: RNCC: 5 | RNVC: 9

25 Nov 1976

5340-12-385-6794
Angle Bracket

123856794
SK976-194220.007.0: RNCC: 3 | RNVC: 2
1307121: RNCC: 5 | RNVC: 2

29 Jun 2011

5340-12-358-1630
Access Cover

123581630
4000A-310410.004.0: RNCC: 2 | RNVC: 2
4000A-310410.004.0: RNCC: 3 | RNVC: 2

23 Sep 2002

5340-12-364-1019
Helical Compression Spring Seat

123641019
1873-184020.003.0: RNCC: 3 | RNVC: 2

20 Aug 2004

5340-12-701-7110
Angle Bracket

127017110
VG95211-ML-127017110: RNCC: 2 | RNVC: 2
5.12.7601.3002.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-2170
Angle Bracket

127012170
VG95211-ML-127012170: RNCC: 2 | RNVC: 2
5.12.0605.0571.02: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-196-8425
Pad Eye

121968425
18017-007-008: RNCC: 3 | RNVC: 2
18017-07-08: RNCC: 5 | RNVC: 2
18017.7.08: RNCC: 5 | RNVC: 9

24 Aug 1983

5340-12-322-7805
Dust And Moisture Seal Protective Plug

123227805
7484.0: RNCC: 3 | RNVC: 2
40 0166 819: RNCC: 5 | RNVC: 2
40 0166 819: RNCC: 5 | RNVC: 9

21 Sep 1990

5340-12-334-5271
Nonmetallic Bumper

123345271
6753250244: RNCC: 3 | RNVC: 2

19 May 1994

5340-12-178-9018
Mounting Bracket

121789018
CF 417 398: RNCC: 3 | RNVC: 2
CF 417 398: RNCC: 5 | RNVC: 2
CF417398: RNCC: 5 | RNVC: 2
CF417398: RNCC: 5 | RNVC: 2
CF417398: RNCC: 5 | RNVC: 2
CF 417 398: RNCC: 5 | RNVC: 2

25 May 1979

5340-12-371-6148
Retaining Strap

123716148
105-80138: RNCC: 3 | RNVC: 2

26 Apr 2007

5340-12-315-2521
Nonmetallic Bumper

123152521
3816880167: RNCC: 3 | RNVC: 2
381 688 01 67: RNCC: 5 | RNVC: 2

6 Oct 1988

5340-12-182-7699
Resilient Mount

121827699
1072410913: RNCC: 3 | RNVC: 2
1072410913KZ: RNCC: 5 | RNVC: 2

25 Feb 1980

5340-12-333-0517
Mounting Bracket

123330517
66.3567.506.05-A001: RNCC: 3 | RNVC: 2

25 Oct 1993

5340-12-357-9005
Mounting Bracket

123579005
13966001: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-12-320-5693
Rod End Connector

123205693
52.1443.275.09: RNCC: 3 | RNVC: 2

26 Jan 1990

5340-12-317-8020
Retaining Strap

123178020
P-616815-045: RNCC: 3 | RNVC: 2
P616815-045: RNCC: 5 | RNVC: 2

16 May 1989

5340-12-394-1132
Spring Loaded Cylinder Fastener

123941132
GN608-6-14: RNCC: 3 | RNVC: 2

5 Nov 2013

5340-12-304-9277
Dust And Moisture Seal Protective Cap-Plug

123049277
TL-4-322: RNCC: 3 | RNVC: 2
TL4-322: RNCC: 5 | RNVC: 2

5 Sep 1985

5340-12-342-4273
Mounting Plate

123424273
100330-3600.01: RNCC: 2 | RNVC: 2
1096240: RNCC: 3 | RNVC: 9

6 Feb 1997

5340-12-331-6226
Spacing Threaded Standoff

123316226
DIN3015-L-AS-3-W1: RNCC: 2 | RNVC: 2
AS-A3: RNCC: 3 | RNVC: 2
AF3: RNCC: 3 | RNVC: 2
ZS5100313.004-ST: RNCC: 5 | RNVC: 2
AS-A3: RNCC: 5 | RNVC: 2

1 Jun 1993

5340-12-317-4204
Mounting Bracket

123174204
P-145502-061: RNCC: 3 | RNVC: 2
P145502-061: RNCC: 5 | RNVC: 2

6 Apr 1989

5340-12-198-4278
Spring Loaded Cylinder Fastener

121984278
5801698-3020.00: RNCC: 2 | RNVC: 2
5801698-3020.00: RNCC: 3 | RNVC: 2
10 0061 419: RNCC: 5 | RNVC: 2
5801698-3020.00: RNCC: 5 | RNVC: 9

26 Jan 1984

5340-12-701-3882
Mounting Plate

127013882
VG95211-ML-127013882: RNCC: 2 | RNVC: 2
5.12.5305.3708.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-384-8941
Retaining Strap

123848941
MMN325-1/2 D9-22-S235JR: RNCC: 3 | RNVC: 2
700325022102: RNCC: 5 | RNVC: 2

7 Apr 2011

5340-12-390-1179
Access Door Hinge

123901179
2300559-188810.000.0: RNCC: 2 | RNVC: 2
2300559-188810.000.0: RNCC: 3 | RNVC: 2

8 Oct 2012

5340-12-334-0772
Nut And Bolt Locking Plate

123340772
DIN3015-L-VS-2-W1: RNCC: 2 | RNVC: 2
HRL2SIP STZN: RNCC: 3 | RNVC: 2
SIG2: RNCC: 3 | RNVC: 2
SB-A2: RNCC: 3 | RNVC: 2
DIN3015-LVS2-W1: RNCC: 5 | RNVC: 2
SB-A2: RNCC: 5 | RNVC: 2

17 Mar 1994

Load More Results