What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 108 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 108 of 178

5340-12-342-1300
Retaining Strap

123421300
6690007-111500.006.0: RNCC: 2 | RNVC: 2
400000-9642: RNCC: 3 | RNVC: 2

17 Dec 1996

5340-12-331-7414
Resilient Mount

123317414
DIN95369-A3-4-UNC3/8-16-CR-ST: RNCC: 2 | RNVC: 2
C2090T: RNCC: 3 | RNVC: 2
151006-UNC3/8-16.CR.ST-70: RNCC: 5 | RNVC: 2
C2090T: RNCC: 5 | RNVC: 9
VG95369-A3-4-UNC3/8-16-CR-ST: RNCC: 5 | RNVC: 9

16 Jun 1993

5340-12-320-4135
Loop Clamp

123204135
DIN3016-1-D1-7X9-W1-2-CR: RNCC: 2 | RNVC: 2
RSGU1.7/9-W1: RNCC: 3 | RNVC: 2
DIN3016-D1-7X9-W1-2: RNCC: 3 | RNVC: 2
9410009007: RNCC: 5 | RNVC: 2
RSGU1.7/9: RNCC: 5 | RNVC: 2
DIN3016-D1-7X9-W1-2: RNCC: 5 | RNVC: 9

12 Jan 1990

5340-12-321-5835
Rigid Caster

123215835
GBBB-6/250: RNCC: 3 | RNVC: 2
120222: RNCC: 5 | RNVC: 2

5 Jun 1990

5340-12-199-5138
Dust And Moisture Seal Protective Plug

121995138
600B212: RNCC: 3 | RNVC: 2
600B212: RNCC: 5 | RNVC: 2
GPN600B212: RNCC: 5 | RNVC: 2
GPN600B212: RNCC: 5 | RNVC: 2
0745150614: RNCC: 5 | RNVC: 2
600021200: RNCC: 5 | RNVC: 9
GPN600,B212: RNCC: 5 | RNVC: 9

8 May 1984

5340-12-169-7541
Spring Tension Clip

121697541
A11A336150004: RNCC: 3 | RNVC: 2

6 Jun 1977

5340-12-311-9781
Nonmetallic Bumper

123119781
600721381: RNCC: 3 | RNVC: 2
81.96020.0284: RNCC: 5 | RNVC: 2
81960200284: RNCC: 5 | RNVC: 2

5 Nov 1987

5340-12-363-8339
Vent Plug

123638339
0419 7729: RNCC: 3 | RNVC: 2

28 Jul 2004

5340-12-353-7074
Manual Control Lever

123537074
47365130600: RNCC: 3 | RNVC: 2

26 Apr 2001

5340-12-358-1840
Dust And Moisture Seal Boot

123581840
1119970281: RNCC: 3 | RNVC: 2

24 Sep 2002

5340-12-353-8842
Cremone Bolt

123538842
209424: RNCC: 3 | RNVC: 2

16 May 2001

5340-12-317-3243
Mounting Plate

123173243
4900064-4124.010: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-382-4555
Extension Drawer Slide

123824555
DZ3832-0050DO: RNCC: 3 | RNVC: 2
ESM 39-220-500: RNCC: 5 | RNVC: 2

24 Jun 2010

5340-12-138-4410

5340-12-327-5085
Gewindeeinsatz

5340-12-183-2026
Double Angle Bracket

121832026
2493001: RNCC: 3 | RNVC: 2

25 Mar 1980

5340-12-323-4286
Mounting Bracket

123234286
6030701540: RNCC: 3 | RNVC: 2

26 Nov 1990

5340-12-319-5216
Mounting Bracket

123195216
6060025: RNCC: 3 | RNVC: 9

9 Oct 1989

5340-12-342-1412
Lock-Release Lever

123421412
536H20014: RNCC: 3 | RNVC: 2
536H20014E1: RNCC: 5 | RNVC: 2

18 Dec 1996

5340-12-149-7935

5340-12-324-0102
Compression Cup

123240102
08193359: RNCC: 3 | RNVC: 2
8971816604: RNCC: 5 | RNVC: 2

16 Jan 1991

5340-12-327-3760
Runner

123273760
81671650045: RNCC: 2 | RNVC: 2
81671656045: RNCC: 3 | RNVC: 2

16 Jan 1992

5340-12-336-2582
Nut And Bolt Locking Plate

123362582
0501 306 089: RNCC: 3 | RNVC: 2
0501306089: RNCC: 5 | RNVC: 9

4 Nov 1994

5340-12-376-1064
Mounting Bracket

123761064
02243229: RNCC: 3 | RNVC: 2

13 Aug 2008

5340-12-393-5763
Mounting Bracket

123935763
4375060840: RNCC: 3 | RNVC: 2

25 Sep 2013

5340-12-325-5082
Access Cover

123255082
3515520: RNCC: 3 | RNVC: 2
112306: RNCC: 5 | RNVC: 2
116 001: RNCC: 5 | RNVC: 2
3515520: RNCC: 5 | RNVC: 2
112306: RNCC: 5 | RNVC: 9
3515520: RNCC: 5 | RNVC: 9

12 Jun 1991

5340-12-358-8600
Mending Plate

123588600
DLAF001: RNCC: 3 | RNVC: 2

22 Nov 2002

5340-12-358-0152
Dust And Moisture Seal Protective Cap

123580152
4080-871: RNCC: 3 | RNVC: 2

2 Sep 2002

5340-12-359-7986
Rod End Clevis

123597986
81482300067: RNCC: 3 | RNVC: 2

11 Mar 2003

5340-12-336-6350
Angle Bracket

123366350
272.377.284: RNCC: 3 | RNVC: 2
272.377 284: RNCC: 5 | RNVC: 9
272.377284: RNCC: 5 | RNVC: 9

5 Dec 1994

5340-12-168-2791
Loop Clamp

121682791
LN9491B7: RNCC: 2 | RNVC: 2

4 Mar 1977

5340-12-312-7155
Mounting Bracket

123127155
1068942: RNCC: 2 | RNVC: 2
1068942: RNCC: 3 | RNVC: 2

29 Jan 1988

5340-12-357-6319
Dust And Moisture Seal Protective Cap

123576319
030133335A: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-12-338-2296
Clamping Catch

123382296
3754601: RNCC: 3 | RNVC: 2

8 Jun 1995

5340-12-359-6874
Mounting Bracket

123596874
9454291440: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-12-330-4503
Sealing Plug Assembly

123304503
020630-111130.02: RNCC: 2 | RNVC: 2
020630-111130.02: RNCC: 3 | RNVC: 2
020630-111130.02: RNCC: 5 | RNVC: 2

16 Dec 1992

5340-12-386-1433
Rod End Clevis

123861433
2800-392810.001.0: RNCC: 2 | RNVC: 2
2800-392810.001.0: RNCC: 3 | RNVC: 2

11 Aug 2011

5340-12-315-2059
Flush Lock

123152059
3070-7347-02-15: RNCC: 3 | RNVC: 2

30 Sep 1988

5340-12-361-0839
Angle Bracket

123610839
J28630009-401: RNCC: 3 | RNVC: 2

20 Aug 2003

5340-12-315-8561
Schlosz Schluessel

123158561
14-987.1001: RNCC: 3 | RNVC: 2

2 Dec 1988

5340-12-392-2779
Mounting Bracket

123922779
7000152: RNCC: 3 | RNVC: 2

23 May 2013

5340-12-353-7639
Nonmetallic Bumper

123537639
08000841: RNCC: 3 | RNVC: 2

3 May 2001

5340-12-305-1932
Detent Plunger

123051932
39-1995-000000.08.0: RNCC: 2 | RNVC: 2
WW 453 723: RNCC: 2 | RNVC: 2
39-1995-000000.08.0: RNCC: 3 | RNVC: 2
WW 453 723: RNCC: 3 | RNVC: 9
WW 453 723: RNCC: 5 | RNVC: 2

4 Oct 1985

5340-12-313-1881
Mounting Bracket

123131881
P-896401-003: RNCC: 3 | RNVC: 2
P896401-003: RNCC: 5 | RNVC: 2

10 Mar 1988

5340-12-145-2689
Expansion Plug

121452689
03.320.51.01.0: RNCC: 3 | RNVC: 2
0332051010: RNCC: 3 | RNVC: 2
2345-11000-01-17: RNCC: 5 | RNVC: 2
148241: RNCC: 5 | RNVC: 2
2345-11000-01-17: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-336-2614
Access Cover

123362614
1419 306 058: RNCC: 3 | RNVC: 2
1419306058: RNCC: 5 | RNVC: 9

4 Nov 1994

5340-12-125-5000

5340-12-188-3878
Dust And Moisture Seal Protective Plug

121883878
600B182: RNCC: 3 | RNVC: 2
600B182: RNCC: 5 | RNVC: 2
GPN600B182: RNCC: 5 | RNVC: 2
GPN600B182: RNCC: 5 | RNVC: 2
GPN600,B182: RNCC: 5 | RNVC: 9
600018200: RNCC: 5 | RNVC: 9
B182: RNCC: 5 | RNVC: 9
B182GPN600: RNCC: 5 | RNVC: 9

6 Jul 1981

5340-12-393-8801
Dust And Moisture Seal Boot

123938801
0005467535: RNCC: 3 | RNVC: 2

17 Oct 2013

5340-12-359-5529
Access Cover

123595529
A1Z10279645: RNCC: 3 | RNVC: 2
10279645: RNCC: 5 | RNVC: 2

17 Feb 2003

5340-12-330-4836
Flush Lock

123304836
Z1210: RNCC: 3 | RNVC: 2

19 Dec 1992

5340-12-371-5406
Mounting Bracket

123715406
0002044-001: RNCC: 3 | RNVC: 2

17 Apr 2007

5340-12-353-7060
Mounting Bracket

123537060
47064316000: RNCC: 3 | RNVC: 2

26 Apr 2001

5340-12-378-8651
Dust And Moisture Seal Protective Cap

123788651
XP53518300010: RNCC: 3 | RNVC: 2

20 May 2009

5340-12-384-8115
Spacing Threaded Standoff

123848115
11003313: RNCC: 3 | RNVC: 2
29007469: RNCC: 5 | RNVC: 2
290 07469: RNCC: 5 | RNVC: 2

31 Mar 2011

5340-12-702-9378
Dust And Moisture Seal Protective Cap

127029378
VG95211-ML-127029378: RNCC: 2 | RNVC: 2
5660A-M27-1,5-1: RNCC: 3 | RNVC: 2
0500840348979: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-181-6098
Mounting Bracket

121816098
85-727: RNCC: 3 | RNVC: 2
90-18351-8: RNCC: 5 | RNVC: 2

10 Dec 1979

5340-12-171-6311
Recess Handle

121716311
81418600036: RNCC: 3 | RNVC: 2
23230-062143-001-0: RNCC: 5 | RNVC: 9
23230-062143.001.0: RNCC: 5 | RNVC: 9

28 Oct 1977

5340-12-338-8205
Door Button

123388205
2300348-183240.002.0: RNCC: 2 | RNVC: 2
2300348-183240.002.0: RNCC: 3 | RNVC: 2
1807192: RNCC: 5 | RNVC: 2

29 Aug 1995

5340-12-346-2449
Loop Clamp

123462449
DIN3016-2-G2-30X9-W1-2: RNCC: 2 | RNVC: 2
DIN3016-G2-30X9-W1-2: RNCC: 5 | RNVC: 9

2 Jul 1998

5340-12-197-9954
Case Corner

121979954
A-243712-751: RNCC: 3 | RNVC: 2
A243712-751: RNCC: 5 | RNVC: 2

8 Dec 1983

5340-12-323-9991
Angle Bracket

123239991
702-237322-901-0: RNCC: 3 | RNVC: 2

15 Jan 1991

5340-12-197-9410
Electrical-Mechanical Equipment Post

121979410
E4782-02-1: RNCC: 3 | RNVC: 2

2 Dec 1983

5340-12-313-5943
Handle Grip

123135943
4.125.02-1201-7005: RNCC: 3 | RNVC: 2

19 Apr 1988

5340-12-701-9895
Angle Bracket

127019895
VG95211-ML-127019895: RNCC: 2 | RNVC: 2
155N1377-4: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-324-0615
Dust And Moisture Seal Protective Plug

123240615
P-158: RNCC: 3 | RNVC: 2
3029710128: RNCC: 5 | RNVC: 2

18 Jan 1991

5340-12-701-9443
Rod End Clevis

127019443
VG95211-ML-127019443: RNCC: 2 | RNVC: 2
5.12.0605.0372.98: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-12-171-9200
Elbow Catch

121719200
3-03404-2100-02: RNCC: 3 | RNVC: 2
895304: RNCC: 5 | RNVC: 2
490126-21095-02: RNCC: 5 | RNVC: 9
3-03404-2100-02: RNCC: 5 | RNVC: 9

29 Nov 1977

5340-12-189-3711
Extension Drawer Slide

121893711
4900059-710349.000.0: RNCC: 2 | RNVC: 2
KM.S01-111300.000: RNCC: 3 | RNVC: 2
710349-000-0: RNCC: 5 | RNVC: 2
4900059-710349-000-0: RNCC: 5 | RNVC: 2
4900059-710349.000.0: RNCC: 5 | RNVC: 2
4900059-710349.000.0: RNCC: 5 | RNVC: 9

23 Sep 1981

5340-12-325-8021
Clamping Catch

123258021
M-18-061/01: RNCC: 3 | RNVC: 2

11 Jul 1991

5340-12-306-0703
Angle Bracket

123060703
5801984-201000.002.0: RNCC: 2 | RNVC: 2
5801984-201000.002.0: RNCC: 3 | RNVC: 2

24 Jan 1986

5340-12-346-3239
Access Cover

123463239
1315 302 120: RNCC: 3 | RNVC: 2
1315302120: RNCC: 5 | RNVC: 2
(241)A39630-117672: RNCC: 5 | RNVC: 2
0-117672: RNCC: 8 | RNVC: 2

10 Jul 1998

5340-12-324-4155
Double Angle Bracket

123244155
160.31.0009: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-12-384-2948
Retaining Strap

123842948
2057574080: RNCC: 3 | RNVC: 2
2057574080: RNCC: 5 | RNVC: 2
23904: RNCC: 5 | RNVC: 2

10 Feb 2011

5340-12-320-6207
Nut And Bolt Retainer

123206207
KEIL-STOP RD 6X5: RNCC: 3 | RNVC: 2
2002000222: RNCC: 5 | RNVC: 2

31 Jan 1990

5340-12-384-0314
Mounting Bracket

123840314
H88036: RNCC: 3 | RNVC: 2

13 Jan 2011

5340-12-362-7650
Nonmetallic Bumper

123627650
S535M10X4001: RNCC: 3 | RNVC: 2

30 Mar 2004

5340-12-383-3595
Dust And Moisture Seal Protective Cap-Plug

123833595
1407635: RNCC: 3 | RNVC: 2
35.445.030: RNCC: 5 | RNVC: 2

11 Oct 2010

5340-12-173-4579
Loop Clamp

121734579
E25044: RNCC: 3 | RNVC: 2

18 Apr 1978

5340-12-369-6608
Dust And Moisture Seal Protective Cover

123696608
64020: RNCC: 3 | RNVC: 2

7 Aug 2006

5340-12-390-0646
Spacing Threaded Standoff

123900646
V6560-06879-103: RNCC: 3 | RNVC: 2

28 Sep 2012

5340-12-384-8131
Webbing Strap

123848131
4100036-150266.000: RNCC: 2 | RNVC: 2
4100036-150266.000: RNCC: 3 | RNVC: 2

31 Mar 2011

5340-12-390-7014
Mechanical Stop

123907014
F1.4553-30-01-00.00.03: RNCC: 3 | RNVC: 2

5 Dec 2012

5340-12-340-7540
Mounting Plate

123407540
CS071FC: RNCC: 3 | RNVC: 2
CS071FC (IDVCS065-117.895): RNCC: 5 | RNVC: 2
PL E 7/1 P-14: RNCC: 5 | RNVC: 2

5 Jun 1996

5340-12-123-8222
Retaining Strap

121238222
K1114: RNCC: 3 | RNVC: 2
111129385: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-360-1522
Mounting Bracket

123601522
9424700079: RNCC: 3 | RNVC: 2

10 Apr 2003

5340-12-317-7327
Mending Plate

123177327
3433201: RNCC: 3 | RNVC: 2

5 May 1989

5340-12-318-0174
Mounting Plate

123180174
51191070019: RNCC: 3 | RNVC: 2
51.19107.0019: RNCC: 5 | RNVC: 2

5 Jun 1989

5340-12-025-8011
Clip

120258011
1072: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-302-1841
Resilient Mount

123021841
6172400318: RNCC: 3 | RNVC: 2

6 Dec 1984

5340-12-198-5765
Lock-Release Lever

121985765
0151404003: RNCC: 3 | RNVC: 2
01514.40GRAU: RNCC: 5 | RNVC: 2

9 Feb 1984

5340-12-305-6627
Dust And Moisture Seal Protective Plug

123056627
GL34 SCHWARZ: RNCC: 3 | RNVC: 2
GL34 86SW: RNCC: 5 | RNVC: 2
000000-0151.273: RNCC: 5 | RNVC: 2
151.273: RNCC: 5 | RNVC: 2
GL34 86: RNCC: 5 | RNVC: 2

3 Dec 1985

5340-12-324-0132
Mounting Bracket

123240132
605 150: RNCC: 3 | RNVC: 2

16 Jan 1991

5340-12-345-0140
Retaining Strap

123450140
WRYUG2202: RNCC: 3 | RNVC: 2
3034930643: RNCC: 5 | RNVC: 2
4374930143: RNCC: 5 | RNVC: 9
A 303 493 06 43: RNCC: 5 | RNVC: 9

21 Jan 1998

5340-12-306-1334
Kunst Gleitschiene

123061334
5801984-981310.004.0: RNCC: 2 | RNVC: 2
5801984-981310.004.0: RNCC: 3 | RNVC: 2

30 Jan 1986

5340-12-389-3714
Retaining Bail

123893714
10222-181720.002.0: RNCC: 2 | RNVC: 2
10222-181720.002.0: RNCC: 3 | RNVC: 2

27 Jun 2012

5340-12-042-5610

5340-12-197-1321
Mending Plate

121971321
5801435-060420.02: RNCC: 3 | RNVC: 2
5801435-060420-02: RNCC: 5 | RNVC: 2

22 Sep 1983

5340-12-332-1600
Metal Grille

123321600
702-942730-000-0: RNCC: 2 | RNVC: 2
702-942730-000-0: RNCC: 3 | RNVC: 2

22 Jul 1993

5340-12-194-2092
Resilient Mount

121942092
155010-M4-HD.AL/AM-40: RNCC: 3 | RNVC: 2
GE22-02-5: RNCC: 5 | RNVC: 2
5800583-094600-036: RNCC: 5 | RNVC: 2
5800583-094600.036: RNCC: 5 | RNVC: 2
GE22-02-5HDS: RNCC: 5 | RNVC: 2
VG95406-F1-1-Q-H: RNCC: 5 | RNVC: 9
VG95406-F1-1Q-H-AL-NMST: RNCC: 5 | RNVC: 9

12 Oct 1982

5340-12-702-4963
Mounting Plate

127024963
VG95211-ML-127024963: RNCC: 2 | RNVC: 2
5.51.5101.1281.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-348-3609
Mounting Bracket

123483609
519-120808.00.0: RNCC: 2 | RNVC: 2
519-120808.00.0: RNCC: 3 | RNVC: 2

9 Jun 1999

5340-12-701-3287
Mounting Bracket

127013287
VG95211-ML-127013287: RNCC: 2 | RNVC: 2
5.12.5104.0030.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-152-2994
Angle Bracket

121522994
5800400-0070.001: RNCC: 3 | RNVC: 2
5800400-0070-001: RNCC: 5 | RNVC: 2
6P358-70-1: RNCC: 5 | RNVC: 2
5800400-0070-001: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-321-6708
Helical Compression Spring Seat

123216708
2.72-11458/2: RNCC: 3 | RNVC: 2

13 Jun 1990

5340-12-307-6775
Electrical-Mechanical Equipment Post

123076775
2300061-291200.007: RNCC: 2 | RNVC: 2
1218 9372: RNCC: 3 | RNVC: 2
9908157: RNCC: 3 | RNVC: 2
2300061-291200.007: RNCC: 5 | RNVC: 2
2300061-291200.007: RNCC: 5 | RNVC: 9
9908157: RNCC: 5 | RNVC: 9
12189372: RNCC: 5 | RNVC: 9
6-226-0-355-048-4: RNCC: 5 | RNVC: 9
6.226.0.355.048.4: RNCC: 5 | RNVC: 9

16 Jul 1986

5340-12-334-2308
Webbing Strap

123342308
79017/026-0900-0360: RNCC: 3 | RNVC: 2
79017/026-900-360: RNCC: 5 | RNVC: 2
DIN60060-2-25X360X540-C4/D2: RNCC: 5 | RNVC: 9

18 Apr 1994

5340-12-338-4728
Angle Bracket

123384728
2500229-199200.000.0: RNCC: 2 | RNVC: 2
2500229-199200.000.0: RNCC: 3 | RNVC: 2

17 Jul 1995

5340-12-320-9192
Retaining Strap

123209192
0121 6697: RNCC: 3 | RNVC: 2
01216697ED8932-02: RNCC: 5 | RNVC: 2

6 Mar 1990

5340-12-161-1327
Spring Tension Clip

121611327
160-700298: RNCC: 3 | RNVC: 2
160-700298: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-362-8019
Mounting Plate

123628019
10020899: RNCC: 3 | RNVC: 2

2 Apr 2004

5340-12-350-7551
Angle Bracket

123507551
105-912467.01: RNCC: 3 | RNVC: 2

16 May 2000

5340-12-320-0290
Angle Bracket

123200290
DWAB001: RNCC: 3 | RNVC: 2

29 Nov 1989

5340-12-384-3951
Multiple Angle Bracket

123843951
4231S01ZAT01: RNCC: 3 | RNVC: 2
P0006319: RNCC: 5 | RNVC: 2

21 Feb 2011

5340-12-394-1877
Mounting Plate

123941877
182.2229471000: RNCC: 3 | RNVC: 2

11 Nov 2013

5340-12-322-2346
Mending Plate

123222346
54.3050.000.10: RNCC: 3 | RNVC: 2

3 Aug 1990

5340-12-343-4171
Protection Bellows

123434171
MH3150: RNCC: 3 | RNVC: 2
MH3150: RNCC: 5 | RNVC: 2
F300 0T 023 0374: RNCC: 6 | RNVC: 9

17 Jun 1997

5340-12-375-5104
Access Cover

123755104
L851M1826101: RNCC: 3 | RNVC: 2

10 Jun 2008

5340-12-363-8823
Retaining Clip

123638823
6530434: RNCC: 3 | RNVC: 2

31 Jul 2004

5340-12-356-0905
Manual Control Handle

123560905
1239190260: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-12-363-9027
Retaining Clip

123639027
705868439: RNCC: 3 | RNVC: 2

3 Aug 2004

5340-12-389-0666
Expansion Shield

123890666
061190: RNCC: 3 | RNVC: 2
061190: RNCC: 5 | RNVC: 2
2500610028: RNCC: 5 | RNVC: 2
07400450: RNCC: 5 | RNVC: 2

23 May 2012

5340-12-363-2940
Mounting Plate

123632940
81411302037: RNCC: 3 | RNVC: 2

20 May 2004

5340-12-381-0884
Manual Control Handle

123810884
0009192960: RNCC: 3 | RNVC: 2

11 Jan 2010

5340-12-093-8323

5340-12-322-2376
Mounting Bracket

123222376
10 0021 191: RNCC: 2 | RNVC: 2
10 0021 191: RNCC: 3 | RNVC: 2

3 Aug 1990

5340-12-332-4114
Mounting Plate

123324114
0851 7753.098: RNCC: 3 | RNVC: 2
0851 7564.109: RNCC: 5 | RNVC: 2
8517564FA T.109: RNCC: 5 | RNVC: 9
8517753FA T.98: RNCC: 5 | RNVC: 9

9 Aug 1993

5340-12-158-6850

5340-12-382-3439
Rod End Clevis

123823439
5233.005.002: RNCC: 3 | RNVC: 2

8 Jun 2010

5340-12-356-1094
Mounting Bracket

123561094
028905256: RNCC: 3 | RNVC: 2

24 Jan 2002

5340-12-174-4924
Clamping Catch

121744924
0240576: RNCC: 3 | RNVC: 2

3 Jul 1978

5340-12-360-1527
Mounting Bracket

123601527
9424741040: RNCC: 3 | RNVC: 2

10 Apr 2003

5340-12-156-3112
Retaining Clip

121563112
147793003: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-313-4808
Rod End Clevis

123134808
801-639.04.20.00: RNCC: 3 | RNVC: 2

7 Apr 1988

5340-12-353-4007
Spacing Threaded Standoff

123534007
11 11 1 340 863: RNCC: 3 | RNVC: 2
1 340 863: RNCC: 5 | RNVC: 2

20 Mar 2001

5340-12-365-2253
Elastic Strap

123652253
2300397-970166.000.0: RNCC: 3 | RNVC: 2

9 Dec 2004

5340-12-317-7550
Plain Solid Disk

123177550
4/0408/4544/0: RNCC: 3 | RNVC: 2

9 May 1989

5340-12-377-0808
Mounting Plate

123770808
7997027-974000.001.0: RNCC: 3 | RNVC: 2

10 Dec 2008

5340-12-701-1917
Mounting Bracket

127011917
5.12.0430.4410.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-185-2035
Mending Plate

121852035
CF447213A: RNCC: 3 | RNVC: 2
CF 447 213 A: RNCC: 5 | RNVC: 2
CF447213A: RNCC: 5 | RNVC: 2
CF 447 213 A: RNCC: 5 | RNVC: 2

20 Sep 1980

5340-12-372-1012
Mounting Plate

123721012
S322I30A1214: RNCC: 3 | RNVC: 2

19 Jun 2007

5340-12-326-6032
Clamping Catch

123266032
4550610001: RNCC: 3 | RNVC: 2

11 Oct 1991

5340-12-326-0607
Loop Clamp

123260607
0289 5994: RNCC: 3 | RNVC: 2
02895994KZ0608-79: RNCC: 5 | RNVC: 2

5 Aug 1991

5340-12-358-8008
Block Clamp

123588008
028130431: RNCC: 3 | RNVC: 2

15 Nov 2002

5340-12-369-5503
Catch Strike

123695503
62267.205.030: RNCC: 3 | RNVC: 2
006402668: RNCC: 5 | RNVC: 2

24 Jul 2006

5340-12-353-8506
Angle Bracket

123538506
5591870540: RNCC: 3 | RNVC: 2
559 187 05 40: RNCC: 5 | RNVC: 2

15 May 2001

5340-12-190-8868
Loop Clamp

121908868
PAN4231HH4827: RNCC: 3 | RNVC: 2

21 Dec 1981

5340-12-316-2391
Expansion Plug

123162391
113255117: RNCC: 3 | RNVC: 2

3 Jan 1989

5340-12-360-9348
Dust And Moisture Seal Protective Cap

123609348
13647203: RNCC: 3 | RNVC: 2

25 Jul 2003

5340-12-360-4120
Mounting Bracket

123604120
3514230200: RNCC: 3 | RNVC: 2
3514230200: RNCC: 5 | RNVC: 2

19 May 2003

5340-12-319-2221
Catch Strike

123192221
461.001.004: RNCC: 3 | RNVC: 2
376.54539: RNCC: 5 | RNVC: 2
54539: RNCC: 5 | RNVC: 9

14 Sep 1989

5340-12-341-8779
Resilient Mount

123418779
701411045: RNCC: 3 | RNVC: 9

9 Nov 1996

5340-12-351-5182
Dust And Moisture Seal Protective Cap

123515182
08001081: RNCC: 3 | RNVC: 2

1 Aug 2000

5340-12-346-4845
Spacing Threaded Standoff

123464845
111A01017: RNCC: 3 | RNVC: 2

30 Jul 1998

5340-12-194-5253
Resilient Mount

121945253
735081: RNCC: 3 | RNVC: 2
57350810041: RNCC: 5 | RNVC: 2
735081: RNCC: 5 | RNVC: 2

12 Nov 1982

5340-12-333-6232
Mounting Bracket

123336232
4215015208: RNCC: 3 | RNVC: 2

13 Jan 1994

5340-12-315-3013
Angle Bracket

123153013
4030781141: RNCC: 3 | RNVC: 2
403 078 11 41: RNCC: 5 | RNVC: 2

11 Oct 1988

5340-12-327-9730
Mounting Plate

123279730
C42080-A32-C28: RNCC: 2 | RNVC: 2
C42080-A32-C28: RNCC: 3 | RNVC: 2

25 Mar 1992

5340-12-372-6174
Butt Hinge

123726174
453 6020-001: RNCC: 3 | RNVC: 2
453 6020-001: RNCC: 5 | RNVC: 2

6 Aug 2007

5340-12-319-3824
Double Angle Bracket

123193824
C117-A44-C47: RNCC: 2 | RNVC: 2
C117-A44-C47: RNCC: 3 | RNVC: 2

27 Sep 1989

5340-12-316-5685
Access Cover

123165685
4139 306 311: RNCC: 3 | RNVC: 2
4139-306-311: RNCC: 5 | RNVC: 2
4139306311: RNCC: 5 | RNVC: 2
4139 306 311: RNCC: 5 | RNVC: 2
100CP3318: RNCC: 5 | RNVC: 2

25 Jan 1989

5340-12-185-6176
Dust And Moisture Seal Protective Plug

121856176
646390620066: RNCC: 3 | RNVC: 2
3246-042: RNCC: 5 | RNVC: 2
3246042: RNCC: 5 | RNVC: 2

21 Oct 1980

5340-12-125-1461
Loop Clamp

121251461
8433895: RNCC: 3 | RNVC: 2
0047-103: RNCC: 5 | RNVC: 2
0047103: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-142-8715
Loop Clamp

121428715
8379950601: RNCC: 3 | RNVC: 2
4799-038: RNCC: 5 | RNVC: 2
4799038: RNCC: 5 | RNVC: 2
103112: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-186-7447
Metal Runner

121867447
5802206-000000-032: RNCC: 2 | RNVC: 2
535.5284: RNCC: 3 | RNVC: 2
5355284: RNCC: 5 | RNVC: 2

2 Feb 1981

5340-12-163-5615
Loop Clamp

121635615
LN9490BM14: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-321-2491
Retaining Strap

123212491
536H09752: RNCC: 3 | RNVC: 2

24 Apr 1990

5340-12-192-5013
Dust And Moisture Seal Protective Cap

121925013
7820215580: RNCC: 3 | RNVC: 2
78202 15580: RNCC: 5 | RNVC: 9

29 Apr 1982

5340-12-179-3006
Dust And Moisture Seal Protective Plug

121793006
3816980077: RNCC: 3 | RNVC: 2

20 Jun 1979

5340-12-365-8495
Retaining Clip

123658495
357881195: RNCC: 3 | RNVC: 2
357 881 195: RNCC: 5 | RNVC: 2

11 Feb 2005

5340-12-316-1530
Mounting Bracket

123161530
3815010520: RNCC: 3 | RNVC: 2
6155010020: RNCC: 5 | RNVC: 9

24 Dec 1988

5340-12-349-8637
Turnbuckle Body

123498637
2300279-5102.05: RNCC: 2 | RNVC: 2
2300279-5102.05: RNCC: 3 | RNVC: 2
9940330: RNCC: 5 | RNVC: 2
2300279-5102.05: RNCC: 5 | RNVC: 9
9940330: RNCC: 5 | RNVC: 9

18 Jan 2000

5340-12-355-8964
Blank Panel

123558964
4616800107: RNCC: 3 | RNVC: 2

2 Jan 2002

5340-12-393-4313
Angle Bracket

123934313
4100098-722010.003.0: RNCC: 2 | RNVC: 2
4100098-722010.003.0: RNCC: 3 | RNVC: 2

16 Sep 2013

5340-12-338-5006
Double Angle Bracket

123385006
90.402.05.02.2: RNCC: 3 | RNVC: 2
2981475: RNCC: 5 | RNVC: 2

19 Jul 1995

5340-12-320-3527
Electrical-Mechanical Equipment Post

123203527
284.86.33.0: RNCC: 3 | RNVC: 9
284.86.330: RNCC: 5 | RNVC: 9

5 Jan 1990

5340-12-386-0603
Manual Control Lever

123860603
2500262-970610.004.0: RNCC: 3 | RNVC: 2

4 Aug 2011

5340-12-311-6653
Access Door

123116653
5801658-7330.00: RNCC: 2 | RNVC: 2
5801658-7330.00: RNCC: 3 | RNVC: 2
5801658-7330.00: RNCC: 5 | RNVC: 9

2 Oct 1987

5340-12-172-2513
Angle Bracket

121722513
805-10-00-16-01: RNCC: 3 | RNVC: 2

4 Jan 1978

5340-12-188-7761
Catch Strike

121887761
5801216-0100.06: RNCC: 3 | RNVC: 2
5801216-0100.06: RNCC: 5 | RNVC: 9

29 Jul 1981

5340-12-313-3509
Double Angle Bracket

123133509
1071279: RNCC: 2 | RNVC: 2
1071279: RNCC: 3 | RNVC: 2

24 Mar 1988

5340-12-026-8318

5340-12-312-7286
Angle Bracket

123127286
3818990012: RNCC: 3 | RNVC: 2
381 899 00 12: RNCC: 5 | RNVC: 2

29 Jan 1988

5340-12-350-5922
Access Cover

123505922
VG95211-ML-123505922: RNCC: 2 | RNVC: 2
160-74963-980: RNCC: 3 | RNVC: 2

18 Apr 2000

5340-12-182-6292
Rod End Clevis

121826292
160-23452-02: RNCC: 3 | RNVC: 2
160-23452-02: RNCC: 5 | RNVC: 9

20 Feb 1980

5340-12-331-0030
Ball Socket Seat

123310030
10 11 10: RNCC: 3 | RNVC: 2
10 11 10: RNCC: 5 | RNVC: 9

10 Mar 1993

5340-12-303-8410
Door Handle

123038410
1157600561: RNCC: 3 | RNVC: 2

7 May 1985

5340-12-327-4194
Electrical-Mechanical Equipment Post

123274194
62.6445.004.63-A001: RNCC: 3 | RNVC: 2

21 Jan 1992

5340-12-315-1414
Access Cover

123151414
C50-02-002: RNCC: 3 | RNVC: 2

22 Sep 1988

5340-12-367-0921
Mounting Bracket

123670921
PIKVWA15/15VA: RNCC: 3 | RNVC: 2

7 Jul 2005

5340-12-380-0012
Mounting Plate

123800012
96500044: RNCC: 3 | RNVC: 2

17 Sep 2009

5340-12-306-0961
Mending Plate

123060961
3358915020: RNCC: 3 | RNVC: 2

27 Jan 1986

5340-12-379-4674
Swivel Caster

123794674
MVTH500000K00: RNCC: 3 | RNVC: 2

27 Jul 2009

5340-12-156-8742
Nonmetallic Bumper

121568742
117700003: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-156-8228
Mending Plate

121568228
KL72903: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-185-6759
Butt Hinge

121856759
563641007: RNCC: 3 | RNVC: 2

23 Oct 1980

5340-12-181-1082
Retaining Strap

121811082
81669132085: RNCC: 3 | RNVC: 2

24 Oct 1979

5340-12-329-9043
Hand Crank

123299043
591801-9048.000: RNCC: 3 | RNVC: 2

10 Oct 1992

5340-12-353-9839
Helical Compression Spring Retainer

123539839
11311340741: RNCC: 3 | RNVC: 2
11 31 1 340 741: RNCC: 5 | RNVC: 2

23 May 2001

5340-12-043-8094

5340-12-317-0691
Mounting Bracket

123170691
4613500038: RNCC: 3 | RNVC: 2

9 Mar 1989

5340-12-376-8063
Block Clamp

123768063
RBN4-428: RNCC: 3 | RNVC: 2

10 Nov 2008

5340-12-339-7832
Retaining Strap

123397832
87-401.00-00.00-43: RNCC: 3 | RNVC: 2

17 Jan 1996

5340-12-348-9777
Pad Eye

123489777
HDWN68303-A-MS-VCR: RNCC: 3 | RNVC: 2

8 Sep 1999

5340-12-393-4578
Quick Release Plunger

123934578
03031-216: RNCC: 3 | RNVC: 2

17 Sep 2013

5340-12-383-8741
Dust And Moisture Seal Protective Cap

123838741
601847: RNCC: 3 | RNVC: 2

15 Dec 2010

5340-12-371-3671
Helical Compression Spring Seat

123713671
R900147756: RNCC: 3 | RNVC: 2
147756: RNCC: 5 | RNVC: 2

21 Mar 2007

5340-12-301-9947
Helical Compression Spring Seat

123019947
3663310028: RNCC: 3 | RNVC: 2

24 Nov 1984

5340-12-349-1890
Metal Grille

123491890
88521 15492: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-12-328-4240
Mounting Plate

123284240
1716515: RNCC: 3 | RNVC: 2
1716515: RNCC: 5 | RNVC: 2

16 May 1992

5340-12-322-1866
Loop Clamp

123221866
54.2247.343.05: RNCC: 2 | RNVC: 2
54.2247.343.05: RNCC: 3 | RNVC: 2

31 Jul 1990

5340-12-366-0358
Mounting Bracket

123660358
9304293740: RNCC: 3 | RNVC: 2

2 Mar 2005

5340-12-337-9120
Nonmetallic Bumper

123379120
4618510040: RNCC: 3 | RNVC: 2
461 851 00 40: RNCC: 5 | RNVC: 2

3 May 1995

5340-12-351-8075
Mechanical Stop

123518075
10063-231300.01: RNCC: 3 | RNVC: 2
10063-231300.01: RNCC: 5 | RNVC: 9

28 Aug 2000

5340-12-394-0251
Mounting Bracket

123940251
L281M8850881: RNCC: 3 | RNVC: 2

30 Oct 2013

5340-12-181-9029
Loop Clamp

121819029
1074900041: RNCC: 3 | RNVC: 9

21 Dec 1979

5340-12-392-9822
Mounting Plate

123929822
4000004499: RNCC: 3 | RNVC: 2

29 Jul 2013

5340-12-354-1556
Mechanical Stop

123541556
506 070 02 41: RNCC: 3 | RNVC: 2

12 Jun 2001

5340-12-347-0224
Access Cover

123470224
4257510602: RNCC: 3 | RNVC: 2

12 Oct 1998

5340-12-327-2014
Extension Drawer Slide

123272014
BD9102E374: RNCC: 3 | RNVC: 2
BD9102E374: RNCC: 5 | RNVC: 9

16 Dec 1991

5340-12-702-8056
Strap Fastener Loop

127028056
50-40700030025: RNCC: 2 | RNVC: 2
1385722205001024: RNCC: 5 | RNVC: 2

21 Dec 1995

5340-12-175-0999
Dust And Moisture Seal Protective Plug

121750999
3099870144: RNCC: 3 | RNVC: 2

23 Aug 1978

5340-12-365-6359
Angle Bracket

123656359
J92228355-001: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-12-184-8320
Spring Tension Clip

121848320
5801505-319-004: RNCC: 3 | RNVC: 2
5801505-319.004: RNCC: 5 | RNVC: 2

21 Aug 1980

5340-12-338-8024
Angle Bracket

123388024
6700017-204800.01: RNCC: 2 | RNVC: 2
6700017-204800.01: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-12-318-7122
Retaining Strap

123187122
42260135: RNCC: 3 | RNVC: 2
42260135EE5017-90: RNCC: 5 | RNVC: 2
5177-97-03.13: RNCC: 5 | RNVC: 2
E5177-97-03.13: RNCC: 5 | RNVC: 2

9 Aug 1989

5340-12-374-3389
Door Button

123743389
0320000020003: RNCC: 3 | RNVC: 2
03-200.00-02.00-03: RNCC: 5 | RNVC: 2

8 Feb 2008

5340-12-347-8852
Loop Clamp

123478852
42-941-011: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-12-177-8931
Mounting Bracket

121778931
2300002-065119.002: RNCC: 2 | RNVC: 2
2300002-065119-002: RNCC: 5 | RNVC: 9

7 Mar 1979

5340-12-185-1871
Mounting Bracket

121851871
100000119: RNCC: 2 | RNVC: 2
100000119: RNCC: 3 | RNVC: 2
5801357-1700.38F: RNCC: 5 | RNVC: 2
5801357-1700.38F: RNCC: 5 | RNVC: 9
5801357-1700-38F: RNCC: 5 | RNVC: 9
5801357-1700-38F: RNCC: 5 | RNVC: 9
5801357-1700-38F: RNCC: 5 | RNVC: 9

18 Sep 1980

5340-12-347-4388
Webbing Strap

123474388
14021-17035: RNCC: 3 | RNVC: 2
14021-17035-00: RNCC: 5 | RNVC: 2

10 Dec 1998

5340-12-167-5452
Loop Clamp

121675452
3556195: RNCC: 3 | RNVC: 2
3556195: RNCC: 5 | RNVC: 2
2865-1226-10: RNCC: 5 | RNVC: 2

3 Jan 1977

5340-12-371-4439
Handle Grip

123714439
226.000.025.120.90: RNCC: 3 | RNVC: 2
006402666: RNCC: 5 | RNVC: 2

30 Mar 2007

5340-12-167-2514

5340-12-360-0393
Mounting Plate

123600393
9262872000: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-315-0495
Lock-Release Lever

123150495
301449: RNCC: 3 | RNVC: 2
301449E84086: RNCC: 5 | RNVC: 2

9 Sep 1988

5340-12-329-5941
Nonmetallic Solid Wheel

123295941
204830-4031: RNCC: 3 | RNVC: 2

5 Sep 1992

5340-12-173-2898
Resilient Mount

121732898
1454274: RNCC: 3 | RNVC: 9

3 Apr 1978

5340-12-373-6753
Angle Bracket

123736753
8801500573: RNCC: 3 | RNVC: 2
8801500473: RNCC: 5 | RNVC: 2

27 Nov 2007

5340-12-146-6602
Retaining Strap

121466602
A6WN7855: RNCC: 3 | RNVC: 2
A6WN7855: RNCC: 5 | RNVC: 2
A6WN7855: RNCC: 5 | RNVC: 2
A6WN7855: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-141-2178
Loop Clamp

121412178
3129952001: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-362-4497
Loop Clamp

123624497
SCH2332: RNCC: 3 | RNVC: 2
60032: RNCC: 5 | RNVC: 2

25 Feb 2004

5340-12-184-9594
Resilient Mount

121849594
E1E 43S 72 ED: RNCC: 3 | RNVC: 2
352250026227: RNCC: 5 | RNVC: 2
E1E43S72ED: RNCC: 5 | RNVC: 2
VE43HDS72ED: RNCC: 5 | RNVC: 2

28 Aug 1980

5340-12-183-9056
Loop Clamp

121839056
2250209: RNCC: 3 | RNVC: 9

29 May 1980

5340-12-394-6442
Flush Lock

123946442
255-9409: RNCC: 3 | RNVC: 2

2 Jan 2014

5340-12-304-3304
Mortise Lock Set

123043304
1 34 019: RNCC: 3 | RNVC: 9

5 Jul 1985

5340-12-386-2406
Mounting Plate

123862406
2481-393300.014.0: RNCC: 2 | RNVC: 2
2481-393300.014.0: RNCC: 3 | RNVC: 2

18 Aug 2011

5340-12-389-3804
Angle Bracket

123893804
1.313-202800.01: RNCC: 2 | RNVC: 2
1.313-202800.01: RNCC: 5 | RNVC: 2

28 Jun 2012

5340-12-192-9253
Butt Hinge

121929253
B90.0001.00: RNCC: 3 | RNVC: 2
0007600017: RNCC: 5 | RNVC: 2
721 1 66 858 0: RNCC: 5 | RNVC: 9

7 Jun 1982

5340-12-192-8963
Butt Hinge

121928963
A12.0006.00: RNCC: 3 | RNVC: 2
4616700052: RNCC: 5 | RNVC: 2
721 1 72 176 2: RNCC: 5 | RNVC: 9

3 Jun 1982

5340-12-363-3276
Nonmetallic Bumper

123633276
1837-191300.008.0: RNCC: 3 | RNVC: 2

27 May 2004

5340-12-364-4262
Angle Bracket

123644262
5801984-983000.005.0: RNCC: 3 | RNVC: 2

24 Sep 2004

5340-12-342-0091
Dust And Moisture Seal Protective Plug

123420091
7450/4: RNCC: 3 | RNVC: 2

29 Nov 1996

5340-12-180-6641
Access Cover

121806641
0288 8046: RNCC: 3 | RNVC: 2
2888046ED0695-78: RNCC: 5 | RNVC: 2
2888046: RNCC: 5 | RNVC: 2

26 Sep 1979

5340-12-325-9339
Mounting Plate

123259339
4611: RNCC: 2 | RNVC: 2
4611: RNCC: 3 | RNVC: 2

23 Jul 1991

5340-12-188-4146
Dust And Moisture Seal Protective Cap

121884146
053072: RNCC: 3 | RNVC: 2
053072E: RNCC: 5 | RNVC: 2

7 Jul 1981

5340-12-315-6660
Mending Plate

123156660
510252-3081.000: RNCC: 3 | RNVC: 2
510252-3081: RNCC: 5 | RNVC: 2

18 Nov 1988

5340-12-311-7316
Loop Clamp

123117316
C40195-A673-C5: RNCC: 3 | RNVC: 2
C40195A673C5: RNCC: 5 | RNVC: 2

12 Oct 1987

5340-12-306-3557
Mending Plate

123063557
P-230330-009: RNCC: 3 | RNVC: 2
P230330-009: RNCC: 5 | RNVC: 2

24 Feb 1986

5340-12-701-7479
Loop Clamp

127017479
VG95211-ML-127017479: RNCC: 2 | RNVC: 2
5.12.7615.0220.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-356-7023
Mounting Bracket

123567023
520-060200.01.0: RNCC: 2 | RNVC: 2
520-060200.01.0: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-12-701-2502
Mounting Bracket

127012502
VG95211-ML-127012502: RNCC: 2 | RNVC: 2
5.12.3620.8520.91: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-352-0543
Angle Bracket

123520543
105-072-517-1: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-12-192-8494
Webbing Strap

121928494
8-4192.00: RNCC: 2 | RNVC: 2
82300-8-4192.00: RNCC: 3 | RNVC: 2
8-4192.00: RNCC: 3 | RNVC: 2
8-4192-00: RNCC: 5 | RNVC: 9
8-4192.00: RNCC: 5 | RNVC: 9
8-4192.00: RNCC: 5 | RNVC: 9
82300-T160X20-NR-STZN-SW: RNCC: 6 | RNVC: 9

27 May 1982

5340-12-167-7002
Spring Tension Clip

121677002
709151-0003.000: RNCC: 3 | RNVC: 2
709151-3: RNCC: 5 | RNVC: 2
7091510003: RNCC: 5 | RNVC: 2

17 Jan 1977

5340-12-312-6976
Dust And Moisture Seal Protective Plug

123126976
3815: RNCC: 3 | RNVC: 2
174-870-0131: RNCC: 5 | RNVC: 2

28 Jan 1988

5340-12-702-6604
Mounting Bracket

127026604
VG95211-ML-127026604: RNCC: 2 | RNVC: 2
SLM-61: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-330-2768
Webbing Strap

123302768
2500117-80100: RNCC: 2 | RNVC: 2
2500 117-80 100: RNCC: 3 | RNVC: 2
2500117-80100: RNCC: 5 | RNVC: 2

26 Nov 1992

5340-12-318-6856
Mounting Bracket

123186856
C249-A28-C32: RNCC: 3 | RNVC: 2

8 Aug 1989

5340-12-186-5572
Multiple Angle Bracket

121865572
NO PRIMARY REF 12-186-5572: RNCC: 3 | RNVC: 2
5716 147050: RNCC: 5 | RNVC: 9
5716147050: RNCC: 5 | RNVC: 9

14 Jan 1981

5340-12-132-7817
Retaining Strap

121327817
DIN72572-15-ST-ZN: RNCC: 2 | RNVC: 2
DIN72572-15-ST-ZN: RNCC: 3 | RNVC: 2
DIN72572-15-ST: RNCC: 5 | RNVC: 9
15DIN72572ST: RNCC: 5 | RNVC: 9
DIN72572-15-ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-342-5656
Dust And Moisture Seal Protective Plug

123425656
3819972086: RNCC: 3 | RNVC: 2
7203-51: RNCC: 5 | RNVC: 2
9252616180: RNCC: 5 | RNVC: 2

27 Feb 1997

5340-12-702-1162
Retaining Strap

127021162
VG95211-ML-127021162: RNCC: 2 | RNVC: 2
30.5314.160: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-702-1701
Mounting Bracket

127021701
VG95211-ML-127021701: RNCC: 2 | RNVC: 2
30.7109.140: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-320-2193
Mending Plate

123202193
5803633-201100.01: RNCC: 2 | RNVC: 2
5803633-201100.01: RNCC: 5 | RNVC: 9

19 Dec 1989

5340-12-362-0710
Mounting Bracket

123620710
J21220023-407: RNCC: 3 | RNVC: 2

6 Jan 2004

5340-12-196-5530
Lock-Release Lever

121965530
C22234-A1000-C15: RNCC: 3 | RNVC: 2
C22234A1000C15: RNCC: 5 | RNVC: 2

18 Jul 1983

5340-12-357-7770
Angle Bracket

123577770
J92220362-003: RNCC: 3 | RNVC: 2
008030793: RNCC: 5 | RNVC: 2

23 Jul 2002

5340-12-318-8307
Mending Plate

123188307
5802017-711400.11: RNCC: 2 | RNVC: 2
5802017-711400.11: RNCC: 3 | RNVC: 2

21 Aug 1989

5340-12-368-1726
Shimmy Damper

123681726
ZG7277T019: RNCC: 3 | RNVC: 2

23 Dec 2005

5340-12-365-9416
Mounting Bracket

123659416
9304298940: RNCC: 3 | RNVC: 2

21 Feb 2005

5340-12-377-3526
Angle Bracket

123773526
41269047: RNCC: 3 | RNVC: 2

12 Jan 2009

5340-12-330-4845
Nonmetallic Bumper

123304845
0663014000: RNCC: 3 | RNVC: 2
S000663014000000: RNCC: 5 | RNVC: 2
000663014000: RNCC: 5 | RNVC: 2

19 Dec 1992

5340-12-386-5792
Mounting Bracket

123865792
T521M1502103: RNCC: 3 | RNVC: 2

13 Sep 2011

5340-12-322-2867
Mounting Bracket

123222867
324707: RNCC: 3 | RNVC: 2

8 Aug 1990

5340-12-304-9552
Helical Compression Spring Seat

123049552
1410120083: RNCC: 3 | RNVC: 2

10 Sep 1985

5340-12-352-8765
Coat And Hat Hook

123528765
T251M3001201: RNCC: 3 | RNVC: 2

28 Dec 2000

5340-12-050-2960

5340-12-332-0781
Handle Grip

123320781
201.705.50.0: RNCC: 3 | RNVC: 2

21 Jul 1993

5340-12-313-8671
Angle Bracket

123138671
4354261840: RNCC: 3 | RNVC: 2
435 426 18 40: RNCC: 5 | RNVC: 2

14 May 1988

5340-12-362-3829
Fuehrungs- Schiene

123623829
1091357: RNCC: 3 | RNVC: 2
135901: RNCC: 5 | RNVC: 9

16 Feb 2004

5340-12-365-2098
Nonmetallic Bumper

123652098
4633230285: RNCC: 3 | RNVC: 2

7 Dec 2004

5340-12-393-3513
Spring Tension Clip

123933513
130766.000: RNCC: 3 | RNVC: 2
0129886178: RNCC: 5 | RNVC: 2

10 Sep 2013

5340-12-304-2362
Electrical-Mechanical Equipment Post

123042362
9176310030: RNCC: 3 | RNVC: 2
91.76.31.0030: RNCC: 5 | RNVC: 9

1 Jul 1985

5340-12-337-7964
Mortise Lock Set

123377964
81971006098: RNCC: 3 | RNVC: 2
81.97100.6098: RNCC: 5 | RNVC: 2

11 Apr 1995

5340-12-337-9518
Mounting Bracket

123379518
1043 306 042: RNCC: 3 | RNVC: 2
1043306042: RNCC: 5 | RNVC: 2
A1043 306 042: RNCC: 5 | RNVC: 9

4 May 1995

5340-12-306-6031
Mending Plate

123066031
8381594640: RNCC: 3 | RNVC: 2
8381594640: RNCC: 5 | RNVC: 2

14 Mar 1986

5340-12-355-5762
Webbing Strap

123555762
17.108.3716.03: RNCC: 2 | RNVC: 2
17.108.3716.03: RNCC: 3 | RNVC: 2

27 Nov 2001

5340-12-393-6616
Bow Handle

123936616
1071706: RNCC: 3 | RNVC: 2
01071706: RNCC: 5 | RNVC: 2

1 Oct 2013

5340-12-363-8110
Nonmetallic Bumper

123638110
0029870825: RNCC: 3 | RNVC: 2

27 Jul 2004

5340-12-163-7399
Loop Clamp

121637399
LN9491BM28: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-197-4009
Mending Plate

121974009
6100.009.1: RNCC: 3 | RNVC: 2

19 Oct 1983

5340-12-340-7496
Mounting Bracket

123407496
923.899.4: RNCC: 3 | RNVC: 2

4 Jun 1996

5340-12-319-3577
Shimmy Damper

123193577
05.323.01.16.0: RNCC: 3 | RNVC: 2

26 Sep 1989

5340-12-359-7548
Mounting Plate

123597548
272.496.558: RNCC: 3 | RNVC: 2

7 Mar 2003

5340-12-162-8207
Double Angle Bracket

121628207
3611228701: RNCC: 3 | RNVC: 2
5555067: RNCC: 5 | RNVC: 2
36112 28701: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-301-6502
Dust And Moisture Seal Protective Cap

123016502
1300061-210000.02: RNCC: 2 | RNVC: 2
7834278: RNCC: 3 | RNVC: 2
BP11: RNCC: 3 | RNVC: 2
7834-278: RNCC: 5 | RNVC: 2
FG797-11-0800: RNCC: 5 | RNVC: 2

30 Oct 1984

5340-12-303-0501
Retaining Strap

123030501
44-30373: RNCC: 3 | RNVC: 2
272198: RNCC: 5 | RNVC: 2

22 Feb 1985

5340-12-354-8358
Access Cover

123548358
5400049-524021.00: RNCC: 2 | RNVC: 2
5400049-524021.00: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-197-3393
Nonmetallic Bumper

121973393
2300172-188300.008.0: RNCC: 2 | RNVC: 2
741279S3HART: RNCC: 3 | RNVC: 2
0052050010: RNCC: 3 | RNVC: 2
57412790360: RNCC: 5 | RNVC: 2
2300172-188300.008.0: RNCC: 5 | RNVC: 2
2300172-188300.008.0: RNCC: 5 | RNVC: 2
2300172-188300.008.0: RNCC: 5 | RNVC: 9

13 Oct 1983

5340-12-123-9028
Hasp Staple

121239028
81968034001: RNCC: 3 | RNVC: 2
70153616493: RNCC: 5 | RNVC: 2
70.15361-6493: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-375-1674
Access Cover

123751674
81614460020: RNCC: 3 | RNVC: 2
81.61446-0020: RNCC: 5 | RNVC: 2
81.61446.0020: RNCC: 5 | RNVC: 2

29 Apr 2008

5340-12-366-1634
Mounting Plate

123661634
24116-000-55: RNCC: 3 | RNVC: 2
KM24116: RNCC: 5 | RNVC: 2

16 Mar 2005

5340-12-191-7341
Catch Strike

121917341
C1-1101ZN: RNCC: 3 | RNVC: 2

1 Mar 1982

5340-12-702-5689
Mounting Bracket

127025689
VG95211-ML-127025689: RNCC: 2 | RNVC: 2
5.51.7701.0530.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-340-1555
Mounting Plate

123401555
81423900161: RNCC: 3 | RNVC: 2
212860-4000: RNCC: 5 | RNVC: 2
2128604000: RNCC: 5 | RNVC: 2

7 Mar 1996

5340-12-337-2094
Nonmetallic Bumper

123372094
1000214-11333.14: RNCC: 2 | RNVC: 2
IR0111-00000WR2-00.14: RNCC: 3 | RNVC: 2

2 Feb 1995

5340-12-302-1060
Nonmetallic Solid Wheel

123021060
20-7390-145: RNCC: 3 | RNVC: 2

1 Dec 1984

5340-12-192-2283
Bow Handle

121922283
5810062: RNCC: 3 | RNVC: 2
580-0062: RNCC: 5 | RNVC: 2
63270066: RNCC: 5 | RNVC: 2
022432-18F: RNCC: 5 | RNVC: 2
521009: RNCC: 5 | RNVC: 2
N10023: RNCC: 5 | RNVC: 9
3270/066: RNCC: 5 | RNVC: 9

1 Apr 1982

5340-12-702-2478
Mounting Plate

127022478
VG95211-ML-127022478: RNCC: 2 | RNVC: 2
30.7904.80: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-341-5734
Angle Bracket

123415734
347-150-016B: RNCC: 3 | RNVC: 2

24 Sep 1996

5340-12-351-7529
Clamping Catch

123517529
2300279-4101.10: RNCC: 2 | RNVC: 2
9869788: RNCC: 3 | RNVC: 2
2300279-4101.10: RNCC: 5 | RNVC: 2
2300279-4101.10: RNCC: 5 | RNVC: 9
9869788: RNCC: 5 | RNVC: 9

18 Aug 2000

5340-12-348-6791
Helical Compression Spring Seat

123486791
10262501: RNCC: 2 | RNVC: 2
10262501: RNCC: 3 | RNVC: 2

4 Aug 1999

5340-12-122-3840
Nonmetallic Bumper

121223840
3042910084: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-334-3219
Retaining Clip

123343219
53.1530.040.10: RNCC: 3 | RNVC: 2

27 Apr 1994

5340-12-360-2983
Bridge Clamp

123602983
0009313049: RNCC: 3 | RNVC: 2
0009313049: RNCC: 5 | RNVC: 2

6 May 2003

5340-12-353-4905
Access Cover

123534905
0000110021: RNCC: 3 | RNVC: 2
000 011 00 21: RNCC: 5 | RNVC: 2

30 Mar 2001

5340-12-192-8908
Angle Bracket

121928908
4353300474: RNCC: 3 | RNVC: 2

2 Jun 1982

5340-12-351-4014
Spring Tension Clip

123514014
10063-230000.01: RNCC: 3 | RNVC: 2
10063-230000.01: RNCC: 5 | RNVC: 9

24 Jul 2000

5340-12-308-6828
Angle Bracket

123086828
249-45039: RNCC: 3 | RNVC: 2

7 Nov 1986

5340-12-317-3562
Mending Plate

123173562
0240 4597: RNCC: 3 | RNVC: 2

31 Mar 1989

5340-12-308-7419
Resilient Mount

123087419
42201777: RNCC: 3 | RNVC: 2

12 Nov 1986

5340-12-010-8464

5340-12-312-4963
Retaining Strap

123124963
940.50.022: RNCC: 3 | RNVC: 2

13 Jan 1988

5340-12-320-8705
Access Cover

123208705
0415 2404: RNCC: 3 | RNVC: 2

28 Feb 1990

5340-12-336-1349
Electronic Equipment Hardware Kit

123361349
8 698 826 261: RNCC: 3 | RNVC: 2

27 Oct 1994

5340-12-392-2766
Resilient Mount Plate

123922766
DW 306 919 A: RNCC: 3 | RNVC: 2
DW 306 919 A: RNCC: 5 | RNVC: 2

23 May 2013

5340-12-386-5081
Access Cover

123865081
120D182040.000.0: RNCC: 2 | RNVC: 2
120D182040.000.0: RNCC: 3 | RNVC: 2
1792897: RNCC: 5 | RNVC: 2

7 Sep 2011

5340-12-317-7331
Access Cover

123177331
3802901: RNCC: 3 | RNVC: 2

5 May 1989

5340-12-360-0027
Retaining Band

123600027
9414301240: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-12-144-2353
Einfach Abg Halter

5340-12-125-4852

5340-12-392-9879
Mounting Bracket

123929879
4000007582: RNCC: 3 | RNVC: 2

29 Jul 2013

5340-12-173-4605
Support Hook

121734605
4161901: RNCC: 3 | RNVC: 2

18 Apr 1978

5340-12-371-4182
Mechanical Stop

123714182
409.124 857: RNCC: 3 | RNVC: 2

27 Mar 2007

5340-12-382-6382
Strap Bolt

123826382
29966: RNCC: 3 | RNVC: 2

20 Jul 2010

5340-12-386-3355
Manual Control Lever

123863355
009-221.352-005: RNCC: 2 | RNVC: 2
009-221.352-005: RNCC: 3 | RNVC: 2

24 Aug 2011

5340-12-178-2246
Mounting Plate

121782246
VS12.16: RNCC: 3 | RNVC: 2
VS12-16: RNCC: 5 | RNVC: 2
1694-619: RNCC: 5 | RNVC: 2
8462141: RNCC: 5 | RNVC: 2

9 Apr 1979

5340-12-184-9821
Mending Plate

121849821
1361046-13000-03: RNCC: 3 | RNVC: 2

30 Aug 1980

5340-12-702-1727
Mounting Plate

127021727
VG95211-ML-127021727: RNCC: 2 | RNVC: 2
30.7173.180: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-339-8478
Spring Loaded Cylinder Fastener

123398478
NO PRIMARY REF 12-339-8478: RNCC: 3 | RNVC: 2
SG 1514 HN: RNCC: 5 | RNVC: 9
SG1514HN: RNCC: 5 | RNVC: 9

24 Jan 1996

5340-12-349-8922
Mounting Bracket

123498922
VG95211-ML-123498922: RNCC: 2 | RNVC: 2
T212M3003102: RNCC: 3 | RNVC: 2

20 Jan 2000

5340-12-390-6301
Loop Clamp

123906301
304657: RNCC: 3 | RNVC: 2
5346-01-14-00/29: RNCC: 5 | RNVC: 2

29 Nov 2012

5340-12-340-7279
Clamping Catch

123407279
594029-0242.000: RNCC: 2 | RNVC: 2
594029-0242.000: RNCC: 3 | RNVC: 2
594029-0242.000: RNCC: 5 | RNVC: 2
594029-0242.000: RNCC: 5 | RNVC: 9

31 May 1996

5340-12-377-0946
Access Cover

123770946
1.500.050.090: RNCC: 3 | RNVC: 2

11 Dec 2008

5340-12-365-0779
Flush Catch

123650779
JN0527-1: RNCC: 3 | RNVC: 2

26 Nov 2004

5340-12-386-6083
Mounting Bracket

123866083
1.314-201600.01: RNCC: 2 | RNVC: 2
1.314-201600.01: RNCC: 5 | RNVC: 2

15 Sep 2011

5340-12-357-2572
Nonmetallic Bumper

123572572
0003220244: RNCC: 3 | RNVC: 2

27 May 2002

5340-12-320-7040
Mending Plate

123207040
CF 324 780 A: RNCC: 2 | RNVC: 2
CF 324 780 A: RNCC: 3 | RNVC: 2
CF 324 780 A: RNCC: 3 | RNVC: 2

8 Feb 1990

5340-12-356-4987
Dust And Moisture Seal Protective Plug

123564987
735M22X1,5: RNCC: 3 | RNVC: 2
909735144: RNCC: 5 | RNVC: 2
GPN735-M22X1,5: RNCC: 5 | RNVC: 9

6 Mar 2002

5340-12-342-1549
Mounting Bracket

123421549
136L54703: RNCC: 3 | RNVC: 2

19 Dec 1996

5340-12-358-4529
Casement Fastener

123584529
SZ2464.000: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-12-358-4525
Retaining Bail

123584525
1214532: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-12-372-6259
Spring Loaded Cylinder Fastener

123726259
24.00.506: RNCC: 3 | RNVC: 2

6 Aug 2007

5340-12-321-7828
Mounting Plate

123217828
54.2322.718.03: RNCC: 2 | RNVC: 2
54.2322.718.03: RNCC: 3 | RNVC: 2

26 Jun 1990

5340-12-391-0419
Mounting Bracket

123910419
2300559-820032.000.0: RNCC: 2 | RNVC: 2
2300559-820032.000.0: RNCC: 3 | RNVC: 2

17 Jan 2013

5340-12-305-5178
Mending Plate

123055178
2300124-180000.003.0: RNCC: 2 | RNVC: 2
2300124-180000.003.0: RNCC: 3 | RNVC: 2
2300124-180000.003.0: RNCC: 3 | RNVC: 2
2300124-180000.003.0: RNCC: 5 | RNVC: 9

18 Nov 1985

5340-12-318-6818
Mounting Bracket

123186818
704-126220-000-3: RNCC: 3 | RNVC: 2

8 Aug 1989

5340-12-190-7197
Angle Bracket

121907197
NO PRIMARY REF 12-190-7197: RNCC: 3 | RNVC: 2
7505135066: RNCC: 5 | RNVC: 9
7505 135066: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-319-1607
Mounting Plate

123191607
5801789-28.001: RNCC: 2 | RNVC: 2
5801789-28.001: RNCC: 3 | RNVC: 2

12 Sep 1989

5340-12-359-9456
Extension Drawer Slide

123599456
79600: RNCC: 3 | RNVC: 2

24 Mar 2003

5340-12-310-8708
Dust And Moisture Seal Protective Cap

123108708
4468 360 037: RNCC: 3 | RNVC: 2
4468360037: RNCC: 5 | RNVC: 2

3 Jul 1987

5340-12-342-6176
Casement Fastener

123426176
U100-3414-001: RNCC: 2 | RNVC: 2
U100-3414-001: RNCC: 3 | RNVC: 2

7 Mar 1997

5340-12-368-3100
Mounting Bracket

123683100
213-0101-PA-SCHWARZ: RNCC: 3 | RNVC: 2
63540030: RNCC: 5 | RNVC: 2

15 Feb 2006

5340-12-393-9503
Cover Retainer

123939503
F1.4553-30-02-20.00-00: RNCC: 3 | RNVC: 2

24 Oct 2013

5340-12-194-7916
Bow Handle

121947916
VG95149-136X43-NRST-LQ-RAL6014: RNCC: 2 | RNVC: 2
5779871: RNCC: 3 | RNVC: 2
577.9871: RNCC: 5 | RNVC: 2

8 Dec 1982

5340-12-363-1284
Snap Hook

123631284
DIN5299-C50ZN: RNCC: 2 | RNVC: 2

6 May 2004

5340-12-333-9533
Access Cover

123339533
5804.2013: RNCC: 3 | RNVC: 2
70.1101.516-00: RNCC: 5 | RNVC: 2
409.061 768: RNCC: 5 | RNVC: 2
409061768: RNCC: 5 | RNVC: 2
409.061 768RAL6031-F9: RNCC: 5 | RNVC: 9

28 Feb 1994

5340-12-186-6468
Resilient Mount

121866468
0010-6220-000: RNCC: 3 | RNVC: 2
0010-6220-000: RNCC: 5 | RNVC: 9

23 Jan 1981

5340-12-702-2147
Mounting Bracket

127022147
VG95211-ML-127022147: RNCC: 2 | RNVC: 2
30.7222.1040: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-197-4038
Retaining Band

121974038
TK-BA35-5340-005: RNCC: 2 | RNVC: 2
41121-122: RNCC: 3 | RNVC: 2
14-027: RNCC: 5 | RNVC: 2
41121-122: RNCC: 5 | RNVC: 9

19 Oct 1983

5340-12-361-6761
Metal Grille

123616761
8320-0026: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-12-180-8855
Mounting Plate

121808855
2500035-000000.04: RNCC: 2 | RNVC: 2
2500035-000000.04: RNCC: 3 | RNVC: 2
2500035-000000.04: RNCC: 5 | RNVC: 9
2500035-000000-04: RNCC: 5 | RNVC: 9
2500035-000000-04: RNCC: 5 | RNVC: 9

11 Oct 1979

5340-12-355-0128
Retaining Strap

123550128
81953126009: RNCC: 3 | RNVC: 2
81.95312-6009: RNCC: 5 | RNVC: 2

20 Sep 2001

5340-12-303-6883
Pad Eye

123036883
48.26.823.00: RNCC: 3 | RNVC: 2
077-47-1090: RNCC: 5 | RNVC: 2

23 Apr 1985

5340-12-318-3255
Mounting Plate

123183255
6600015-204.002: RNCC: 3 | RNVC: 2
6600015-204.002: RNCC: 5 | RNVC: 9

30 Jun 1989

5340-12-196-2816
Angle Bracket

121962816
35144-001: RNCC: 3 | RNVC: 2
35 144-001: RNCC: 5 | RNVC: 9

22 Jun 1983

5340-12-180-7297
Nut And Bolt Locking Plate

121807297
0730 749 080: RNCC: 3 | RNVC: 2
0730749080: RNCC: 5 | RNVC: 2
0730749080: RNCC: 5 | RNVC: 9

28 Sep 1979

5340-12-301-2388
Angle Bracket

123012388
4178888: RNCC: 3 | RNVC: 2

29 Sep 1984

5340-12-350-2996
Section Block Clamp

123502996
105-60501.06: RNCC: 3 | RNVC: 2

14 Mar 2000

5340-12-043-9243

5340-12-388-8570
Threaded Hinged Standoff

123888570
140.03.055: RNCC: 3 | RNVC: 2
140.03.055: RNCC: 5 | RNVC: 2

30 Apr 2012

5340-12-300-6705
Angle Bracket

123006705
4355830614: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-011-6133

5340-12-355-1055
Multiple Angle Bracket

123551055
54.1067.400.37: RNCC: 3 | RNVC: 2

9 Oct 2001

5340-12-126-3417

5340-12-331-9496
Nonmetallic Bumper

123319496
88962100026: RNCC: 3 | RNVC: 2
88.96210.0026: RNCC: 5 | RNVC: 2
88.96210.0026: RNCC: 5 | RNVC: 2

8 Jul 1993

5340-12-358-8742
Strap Fastener Loop

123588742
5400051-832117.00: RNCC: 2 | RNVC: 2
5400051-832117.00: RNCC: 3 | RNVC: 2

25 Nov 2002

5340-12-359-6033
Mounting Bracket

123596033
9432600462: RNCC: 3 | RNVC: 2

20 Feb 2003

5340-12-319-1084
Access Door

123191084
731.02.070: RNCC: 3 | RNVC: 2
V731.02.070: RNCC: 5 | RNVC: 2

8 Sep 1989

5340-12-369-8749
Manual Control Handle

123698749
61066: RNCC: 3 | RNVC: 2

23 Aug 2006

5340-12-314-1621
Mounting Bracket

123141621
4354300610: RNCC: 3 | RNVC: 2
435 430 06 10: RNCC: 5 | RNVC: 2

14 Jun 1988

5340-12-320-8466
Shimmy Damper

123208466
5802300479: RNCC: 3 | RNVC: 2

22 Feb 1990

5340-12-338-4120
Mending Plate

123384120
6736264: RNCC: 2 | RNVC: 2
6736264: RNCC: 3 | RNVC: 2
6736264: RNCC: 5 | RNVC: 9

5 Jul 1995

5340-12-372-8496
Loop Clamp

123728496
61825210: RNCC: 3 | RNVC: 2
6182 5210: RNCC: 5 | RNVC: 2

28 Aug 2007

5340-12-364-6460
Manual Control Handle

123646460
2447.606: RNCC: 3 | RNVC: 2

16 Oct 2004

5340-12-362-1399
Arched Cushion

123621399
11193000: RNCC: 3 | RNVC: 2
LFPC70: RNCC: 5 | RNVC: 2
364-6536: RNCC: 5 | RNVC: 2

14 Jan 2004

5340-12-199-6820
Detent Plunger

121996820
351271253301: RNCC: 3 | RNVC: 2
35127125330: RNCC: 5 | RNVC: 2

22 May 1984

5340-12-386-5918
Mounting Bracket

123865918
T251M3009208: RNCC: 3 | RNVC: 2

14 Sep 2011

5340-12-163-3536
Loop Clamp

121633536
524A08001: RNCC: 3 | RNVC: 2
524A08001E1: RNCC: 5 | RNVC: 2
524A08001E1: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-367-5450
Mounting Bracket

123675450
H10640: RNCC: 3 | RNVC: 2

31 Aug 2005

5340-12-320-8197
Loop Clamp

123208197
DKS1: RNCC: 3 | RNVC: 2
5L.4595.013.62: RNCC: 5 | RNVC: 2
5L.4595.013.62: RNCC: 5 | RNVC: 2

20 Feb 1990

5340-12-355-6441
Nonmetallic Bumper

123556441
4617400214: RNCC: 3 | RNVC: 2

30 Nov 2001

5340-12-179-4951
Access Cover

121794951
4353020042: RNCC: 3 | RNVC: 2

2 Jul 1979

5340-12-306-3598
Spring Tension Clip

123063598
1012.1: RNCC: 3 | RNVC: 2
GT6.1: RNCC: 5 | RNVC: 2

24 Feb 1986

5340-12-197-5333
Loop Clamp

121975333
PAN4268-7-2: RNCC: 3 | RNVC: 2

28 Oct 1983

5340-12-359-9749
Mounting Bracket

123599749
0318907580: RNCC: 3 | RNVC: 2
03.189.07.58.0: RNCC: 5 | RNVC: 2

25 Mar 2003

5340-12-349-6408
Mounting Bracket

123496408
61132306314: RNCC: 3 | RNVC: 2
61 13 2 306 314: RNCC: 5 | RNVC: 2

13 Dec 1999

5340-12-043-3018

5340-12-394-0695
Mounting Bracket

123940695
T291M2201101: RNCC: 3 | RNVC: 2

4 Nov 2013

5340-12-371-3197
Section Block Clamp

123713197
1215 6422: RNCC: 3 | RNVC: 2

14 Mar 2007

5340-12-358-7909
Retaining Band

123587909
6554900942: RNCC: 3 | RNVC: 2

14 Nov 2002

5340-12-352-7371
Spacing Threaded Standoff

123527371
13842201: RNCC: 3 | RNVC: 2

11 Dec 2000

5340-12-373-8943
Angle Bracket

123738943
5.018-211.0: RNCC: 3 | RNVC: 2
5.018-211: RNCC: 5 | RNVC: 9

17 Dec 2007

5340-12-300-6563
Angle Bracket

123006563
S4-9700700: RNCC: 3 | RNVC: 2
S4-9700700: RNCC: 5 | RNVC: 9
S4-9700700: RNCC: 5 | RNVC: 9

22 Aug 1984

5340-12-308-6825
Retaining Strap

123086825
249-45444: RNCC: 3 | RNVC: 2

7 Nov 1986

5340-12-306-6247
Mending Plate

123066247
105-82734.09: RNCC: 3 | RNVC: 2

14 Mar 1986

5340-12-349-1913
Metal Grille

123491913
9005570 059: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-12-302-1661
Angle Bracket

123021661
4179108: RNCC: 3 | RNVC: 2
S12B.K02.08.00.000: RNCC: 5 | RNVC: 2

6 Dec 1984

5340-12-334-4908
Angle Bracket

123344908
1680321700: RNCC: 3 | RNVC: 2
16803217: RNCC: 5 | RNVC: 2

16 May 1994

5340-12-333-3576
Double Angle Bracket

123333576
81429025121: RNCC: 2 | RNVC: 2
81429025121: RNCC: 3 | RNVC: 2
81.42902.5121: RNCC: 5 | RNVC: 2

6 Dec 1993

5340-12-337-0056
Handle Grip

123370056
160-62242-07: RNCC: 3 | RNVC: 2
15160-62242.07: RNCC: 5 | RNVC: 2
160-62242.07: RNCC: 5 | RNVC: 2
160-62242-07: RNCC: 5 | RNVC: 9

10 Jan 1995

5340-12-702-1822
Mounting Bracket

127021822
VG95211-ML-127021822: RNCC: 2 | RNVC: 2
30.7205.65: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-148-4716
Loop Clamp

121484716
NO PRIMARY REF 12-148-4716: RNCC: 3 | RNVC: 2
HP13N: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-321-2313
Mounting Bracket

123212313
2500067-101820.00: RNCC: 2 | RNVC: 2
2500067-101820.00: RNCC: 3 | RNVC: 2

20 Apr 1990

5340-12-184-2189
Spring Tension Clip

121842189
10605-01: RNCC: 3 | RNVC: 2
465486: RNCC: 5 | RNVC: 9

5 Jul 1980

5340-12-350-3408
Angle Bracket

123503408
VG95211-ML-123503408: RNCC: 2 | RNVC: 2
160-88343-02: RNCC: 3 | RNVC: 2
160-88343-02: RNCC: 5 | RNVC: 9

17 Mar 2000

5340-12-197-4229
Webbing Strap

121974229
5801813-600002.00: RNCC: 2 | RNVC: 2
5801813-600002-00: RNCC: 5 | RNVC: 9
000-B2-25X2,5X190-BW-RAL6031: RNCC: 6 | RNVC: 9

20 Oct 1983

5340-12-341-8335
Handle Grip

123418335
KS1484000: RNCC: 3 | RNVC: 2
KS1484: RNCC: 5 | RNVC: 2
KS 1484: RNCC: 5 | RNVC: 2

1 Nov 1996

5340-12-196-2542
Pad Eye

121962542
03670710: RNCC: 3 | RNVC: 2

20 Jun 1983

5340-12-360-2848
Butt Hinge

123602848
4303610044: RNCC: 3 | RNVC: 2

5 May 2003

5340-12-360-2171
Mounting Bracket

123602171
TS8800400: RNCC: 3 | RNVC: 2
8800400: RNCC: 5 | RNVC: 9

22 Apr 2003

5340-12-041-0397

5340-12-352-7222
Dust And Moisture Seal Protective Cap

123527222
1215 5461: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-12-022-7108

5340-12-315-8210
Lock-Release Lever

123158210
1000091-3400.04: RNCC: 3 | RNVC: 2
1000091-3400.04: RNCC: 5 | RNVC: 9

30 Nov 1988

5340-12-314-9361
Bridge Clamp

123149361
51.0526.031.00: RNCC: 3 | RNVC: 2

30 Aug 1988

5340-12-023-2204

5340-12-318-8814
Door Handle

123188814
251843704C: RNCC: 3 | RNVC: 2
251 843 704C: RNCC: 5 | RNVC: 2
251843704E: RNCC: 5 | RNVC: 9

22 Aug 1989

5340-12-365-1598
Mending Plate

123651598
207572: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-12-387-8635
Angle Bracket

123878635
7092959: RNCC: 3 | RNVC: 2

3 Feb 2012

5340-12-364-6990
Mounting Plate

123646990
5172371935: RNCC: 3 | RNVC: 2

21 Oct 2004

5340-12-349-8851
Mounting Bracket

123498851
54.1038.142.00: RNCC: 2 | RNVC: 2
54.1038.142.00: RNCC: 3 | RNVC: 2

20 Jan 2000

5340-12-381-2951
Mounting Plate

123812951
424-04-IB2: RNCC: 3 | RNVC: 2
4250473100455: RNCC: 5 | RNVC: 2

29 Jan 2010

5340-12-363-5058
Pad Eye

123635058
1030020-260650.000.0: RNCC: 3 | RNVC: 2

23 Jun 2004

5340-12-366-3828
Mechanic Equipment Hardware Kit

123663828
V12S1T2U-300SP1: RNCC: 3 | RNVC: 2
AFG071869-02: RNCC: 5 | RNVC: 2

19 Apr 2005

5340-12-360-6570
Turnbuckle

123606570
T41688110: RNCC: 3 | RNVC: 2
63-T41688110: RNCC: 5 | RNVC: 2

25 Jun 2003

5340-12-303-1702
Retaining Strap

123031702
5801997-321000.02: RNCC: 2 | RNVC: 2
5801997-321000.02: RNCC: 3 | RNVC: 2

1 Mar 1985

5340-12-302-2971
Mending Plate

123022971
2300164-291210.000: RNCC: 2 | RNVC: 2
2300164-291210.000: RNCC: 3 | RNVC: 2
2300164-291210.000: RNCC: 5 | RNVC: 9
2300164-291210-000: RNCC: 5 | RNVC: 9
2300164-291210.000: RNCC: 5 | RNVC: 9

14 Dec 1984

5340-12-370-6931
Access Door Hinge

123706931
466537: RNCC: 3 | RNVC: 2

11 Dec 2006

5340-12-386-8325
Dust And Moisture Seal Protective Plug

123868325
06510208: RNCC: 3 | RNVC: 2
CV190616: RNCC: 5 | RNVC: 2
06510208: RNCC: 5 | RNVC: 2

6 Oct 2011

5340-12-152-8076

5340-12-366-1100
Mounting Plate

123661100
2500075-560520.001.0: RNCC: 3 | RNVC: 2

9 Mar 2005

5340-12-385-9779
Manual Control Lever

123859779
2481-391373.001.0: RNCC: 3 | RNVC: 2

27 Jul 2011

5340-12-375-6805
Retaining Clip

123756805
9009015A: RNCC: 3 | RNVC: 2

24 Jun 2008

5340-12-374-2524
Threaded Hinged Standoff

123742524
L521M3834209: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-12-375-7224
Loop Clamp

123757224
0004901041: RNCC: 3 | RNVC: 2
A0004901041: RNCC: 5 | RNVC: 9

27 Jun 2008

5340-12-384-4790
Mounting Plate

123844790
1092245: RNCC: 3 | RNVC: 2

28 Feb 2011

5340-12-194-5635
Lock-Release Lever

121945635
2300174-972320: RNCC: 3 | RNVC: 2
2300174-972320: RNCC: 5 | RNVC: 9

15 Nov 1982

5340-12-330-0189
Loop Clamp

123300189
LN9491BK42: RNCC: 2 | RNVC: 2

22 Oct 1992

5340-12-364-3975
Mounting Plate

123643975
T621P1002201: RNCC: 3 | RNVC: 2

21 Sep 2004

5340-12-359-2286
Key Blank

123592286
0117 8791: RNCC: 3 | RNVC: 2

14 Jan 2003

5340-12-365-5891
Mounting Bracket

123655891
J32320074-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-317-0286
Bow Handle

123170286
5802196-20142: RNCC: 2 | RNVC: 2
4810388-20142: RNCC: 3 | RNVC: 2
5802196-20142: RNCC: 5 | RNVC: 2

6 Mar 1989

5340-12-309-4966
Webbing Strap

123094966
5400029-400: RNCC: 2 | RNVC: 2
5400029-400: RNCC: 5 | RNVC: 9

28 Jan 1987

5340-12-367-3552
Mounting Plate

123673552
5161-360300A00C: RNCC: 2 | RNVC: 2
5161-360300A00C: RNCC: 3 | RNVC: 2

10 Aug 2005

5340-12-358-1768
Double Angle Bracket

123581768
12.91.69: RNCC: 3 | RNVC: 2

24 Sep 2002

5340-12-364-4024
Stand Base

123644024
T621P1002332: RNCC: 3 | RNVC: 2

22 Sep 2004

5340-12-010-9579

5340-12-304-7498
Dust And Moisture Seal Protective Plug

123047498
025021309: RNCC: 3 | RNVC: 2

19 Aug 1985

5340-12-354-3287
Retaining Strap

123543287
1239950265: RNCC: 3 | RNVC: 2

2 Jul 2001

5340-12-188-8430
Manual Control Handle

121888430
3907.98100.000: RNCC: 3 | RNVC: 2
83091950034: RNCC: 5 | RNVC: 2
83.09195.0034: RNCC: 5 | RNVC: 2

3 Aug 1981

5340-12-702-6374
Mounting Bracket

127026374
84.5305.317: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-147-6840
Spring Tension Clip

121476840
5800193-0382.007: RNCC: 2 | RNVC: 2
5800193-0382.007: RNCC: 3 | RNVC: 2
5800193-0382-007: RNCC: 5 | RNVC: 2
5800193-0382-007: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-339-2275
Mounting Bracket

123392275
3795980: RNCC: 3 | RNVC: 2

26 Oct 1995

5340-12-184-0129
Angle Bracket

121840129
1820108000: RNCC: 3 | RNVC: 2
0002520333: RNCC: 5 | RNVC: 2

10 Jun 1980

5340-12-306-0126
Angle Bracket

123060126
2478501: RNCC: 3 | RNVC: 2

20 Jan 1986

5340-12-702-8059
Mounting Plate

127028059
1385722205001286: RNCC: 2 | RNVC: 2

21 Dec 1995

5340-12-393-8279
Pipe Bracket

123938279
11.44086-1845: RNCC: 3 | RNVC: 2
11.44086-1845: RNCC: 5 | RNVC: 2

15 Oct 2013

5340-12-383-3597
Shimmy Damper

123833597
1622117: RNCC: 3 | RNVC: 2

11 Oct 2010

5340-12-345-9025
Lock-Release Lever

123459025
E24532: RNCC: 3 | RNVC: 2

14 May 1998

5340-12-344-0497
Mending Plate

123440497
2996.10.72: RNCC: 3 | RNVC: 2
2996.1072: RNCC: 5 | RNVC: 2

4 Sep 1997