What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 107 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 107 of 178

5340-12-355-2159
Webbing Strap

123552159
5802158-110320: RNCC: 2 | RNVC: 2
5802158-110320: RNCC: 3 | RNVC: 2

23 Oct 2001

5340-12-328-9315
Spring Loaded Cylinder Fastener

123289315
2653-073300.07: RNCC: 2 | RNVC: 2
2653-073300.07: RNCC: 3 | RNVC: 2

2 Jul 1992

5340-12-192-3307
Shimmy Damper

121923307
4603170112: RNCC: 3 | RNVC: 2
7005-59: RNCC: 5 | RNVC: 2
721 1 31 134 1: RNCC: 5 | RNVC: 9

15 Apr 1982

5340-12-199-1397
Angle Bracket

121991397
5801435-031300.01: RNCC: 2 | RNVC: 2
5801435-031300-01: RNCC: 3 | RNVC: 2
9873936: RNCC: 3 | RNVC: 9
5801435-031300.01: RNCC: 5 | RNVC: 2
5801435-031300.01: RNCC: 5 | RNVC: 9

29 Mar 1984

5340-12-365-2640
Mounting Bracket

123652640
2300109-180015.000.0: RNCC: 3 | RNVC: 2

14 Dec 2004

5340-12-387-5848
Bow Handle

123875848
GE9101T788: RNCC: 3 | RNVC: 2

11 Jan 2012

5340-12-345-4318
Angle Bracket

123454318
54.0053.104.00: RNCC: 3 | RNVC: 2

13 Mar 1998

5340-12-387-9349
Mounting Bracket

123879349
PTFS300: RNCC: 3 | RNVC: 2

9 Feb 2012

5340-12-360-0468
Support Hook

123600468
9416890022: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-361-8268
Rim Lock

123618268
51263: RNCC: 3 | RNVC: 2

21 Nov 2003

5340-12-158-9664
Dust And Moisture Seal Protective Cap

121589664
200Z22X18: RNCC: 3 | RNVC: 2
200Z22X18: RNCC: 5 | RNVC: 2
GPN200Z22X18: RNCC: 5 | RNVC: 2
200221800: RNCC: 5 | RNVC: 9
Z22X18GPN200: RNCC: 5 | RNVC: 9
GPN200,Z22X18: RNCC: 5 | RNVC: 9
Z22X18: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-387-9130
Shimmy Damper

123879130
7094038: RNCC: 3 | RNVC: 2

8 Feb 2012

5340-12-193-5765
Nonmetallic Bumper

121935765
2300174-970800.02: RNCC: 2 | RNVC: 2
2300174-970800.02: RNCC: 3 | RNVC: 2
2300174-970800.02: RNCC: 5 | RNVC: 9

4 Aug 1982

5340-12-703-3549
Pad Eye

127033549
51-99511466010: RNCC: 2 | RNVC: 2

23 May 2000

5340-12-163-9931
Resilient Mount

121639931
330314191: RNCC: 3 | RNVC: 2
330314191: RNCC: 3 | RNVC: 2
330314191: RNCC: 5 | RNVC: 2
14191: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-301-2415
Rim Lock

123012415
6000102: RNCC: 3 | RNVC: 2
4178423: RNCC: 5 | RNVC: 2

29 Sep 1984

5340-12-332-6285
Runner

123326285
81669120065: RNCC: 2 | RNVC: 2
81669120065: RNCC: 3 | RNVC: 2
81.66912.0065: RNCC: 5 | RNVC: 2

31 Aug 1993

5340-12-301-0656
Rod End Connector

123010656
54.0028.126.11: RNCC: 3 | RNVC: 2

20 Sep 1984

5340-12-322-0294
Detent Plunger

123220294
54.0064.140.17: RNCC: 3 | RNVC: 2

19 Jul 1990

5340-12-334-5405
Dust And Moisture Seal Protective Cap

123345405
K1492450: RNCC: 3 | RNVC: 2
492450: RNCC: 5 | RNVC: 2
585146: RNCC: 5 | RNVC: 2

20 May 1994

5340-12-377-7710
Multiple Angle Bracket

123777710
64293182: RNCC: 3 | RNVC: 2

10 Feb 2009

5340-12-324-4254
Double Angle Bracket

123244254
536D18723: RNCC: 3 | RNVC: 2

15 Feb 1991

5340-12-306-3674
Retaining Strap

123063674
023-150000-27N1: RNCC: 3 | RNVC: 2

24 Feb 1986

5340-12-327-3594
Loop Clamp

123273594
LN9490BK11: RNCC: 2 | RNVC: 2

15 Jan 1992

5340-12-348-0960
Webbing Strap

123480960
T13376: RNCC: 3 | RNVC: 2
T13376: RNCC: 5 | RNVC: 2

13 Apr 1999

5340-12-361-3769
Bow Handle

123613769
T952M0012202: RNCC: 3 | RNVC: 2

22 Sep 2003

5340-12-361-5638
Mounting Bracket

123615638
230.1014: RNCC: 3 | RNVC: 2

17 Oct 2003

5340-12-144-9609
Butt Hinge

121449609
LN9172KFF680: RNCC: 2 | RNVC: 2
30X680LN9172: RNCC: 5 | RNVC: 2
LN9172FF680: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-305-5516
Retaining Strap

123055516
54.0028.326.17: RNCC: 3 | RNVC: 2

21 Nov 1985

5340-12-175-2152
Loop Clamp

121752152
51974010262: RNCC: 3 | RNVC: 2
5000278799: RNCC: 5 | RNVC: 2
5000278799: RNCC: 5 | RNVC: 9

30 Aug 1978

5340-12-305-5983
Spring Tension Clip

123055983
4067250047: RNCC: 3 | RNVC: 2

26 Nov 1985

5340-12-319-6955
Metal Runner

123196955
409032218: RNCC: 3 | RNVC: 2

26 Oct 1989

5340-12-306-5761
Ball Socket Seat

123065761
81637300032: RNCC: 3 | RNVC: 2
4.1655: RNCC: 5 | RNVC: 2

12 Mar 1986

5340-12-380-5045
Mounting Bracket

123805045
9425211140: RNCC: 3 | RNVC: 2

4 Nov 2009

5340-12-302-7865
Nonmetallic Bumper

123027865
CF 493 236 A: RNCC: 3 | RNVC: 2
CF 493 236 A: RNCC: 5 | RNVC: 2

30 Jan 1985

5340-12-388-5447
Rod End Clevis

123885447
5840910095: RNCC: 3 | RNVC: 2

29 Mar 2012

5340-12-367-6580
Mounting Bracket

123676580
2300495-970121.000.0: RNCC: 3 | RNVC: 2

20 Sep 2005

5340-12-387-8528
Plug Button

123878528
7093641: RNCC: 3 | RNVC: 2

2 Feb 2012

5340-12-316-0062
Angle Bracket

123160062
CF 807 695 A: RNCC: 3 | RNVC: 2

14 Dec 1988

5340-12-302-6145
Rubber Bumper

123026145
YK03200181: RNCC: 3 | RNVC: 2
03200181: RNCC: 5 | RNVC: 9
H.B 913SV 1056 1975 03 20 0181: RNCC: 5 | RNVC: 9

17 Jan 1985

5340-12-176-3960
Nonmetallic Bumper

121763960
4011-1: RNCC: 3 | RNVC: 2
C 3695 616 -8: RNCC: 5 | RNVC: 2
C369561608: RNCC: 5 | RNVC: 2
C 3695 616 -8: RNCC: 5 | RNVC: 2
C369561608: RNCC: 5 | RNVC: 2

27 Nov 1978

5340-12-389-2103
Expansion Shield

123892103
565645: RNCC: 3 | RNVC: 2

6 Jun 2012

5340-12-345-8299
Mounting Bracket

123458299
2125-121240A00C: RNCC: 2 | RNVC: 2
2125-121240A00C: RNCC: 3 | RNVC: 2

30 Apr 1998

5340-12-383-7790
Angle Bracket

123837790
601241-621120.02: RNCC: 2 | RNVC: 2
601241-621120.02: RNCC: 3 | RNVC: 2

7 Dec 2010

5340-12-367-6815
Dust And Moisture Seal Protective Cap

123676815
4790445: RNCC: 3 | RNVC: 2

23 Sep 2005

5340-12-358-3078
Dust And Moisture Seal Boot

123583078
8541819: RNCC: 3 | RNVC: 2
GSE 72 00176: RNCC: 5 | RNVC: 2

10 Oct 2002

5340-12-360-2096
Exit Bolt

123602096
X694D7889K05220: RNCC: 3 | RNVC: 2

17 Apr 2003

5340-12-176-2574
Butt Hinge Leaf

121762574
183823305B: RNCC: 3 | RNVC: 2
B183823305B: RNCC: 5 | RNVC: 2
183823305: RNCC: 5 | RNVC: 2
B183823305: RNCC: 5 | RNVC: 2

23 Nov 1978

5340-12-393-1884
Plug Button

123931884
2309524000: RNCC: 3 | RNVC: 2

15 Aug 2013

5340-12-383-7348
Helical Compression Spring Retainer

123837348
7125185: RNCC: 3 | RNVC: 2

1 Dec 2010

5340-12-392-6538
Mending Plate

123926538
869144007: RNCC: 3 | RNVC: 2

26 Jun 2013

5340-12-355-1148
Access Cover

123551148
11584601: RNCC: 3 | RNVC: 2

9 Oct 2001

5340-12-356-1244
Retaining Strap

123561244
167.060.005: RNCC: 3 | RNVC: 2
167 060 005: RNCC: 5 | RNVC: 2

24 Jan 2002

5340-12-305-5976
Butt Hinge Leaf

123055976
4066210151: RNCC: 3 | RNVC: 2

26 Nov 1985

5340-12-144-3334

5340-12-301-0661
Butt Hinge Leaf

123010661
54.0028.186.02: RNCC: 3 | RNVC: 2

20 Sep 1984

5340-12-307-3747
Nonmetallic Bumper

123073747
2747802: RNCC: 3 | RNVC: 2

10 Jun 1986

5340-12-389-4274
Dust And Moisture Seal Protective Cap-Plug

123894274
2894110: RNCC: 3 | RNVC: 2

4 Jul 2012

5340-12-333-5121
Angle Bracket

123335121
5802017-703400.04: RNCC: 2 | RNVC: 2
5802017-703400.04: RNCC: 3 | RNVC: 2

28 Dec 1993

5340-12-094-1562

5340-12-354-5143
Handle Grip

123545143
58 607 5107: RNCC: 3 | RNVC: 2

23 Jul 2001

5340-12-040-8311

5340-12-393-4021
Retaining Band

123934021
86959: RNCC: 3 | RNVC: 2

13 Sep 2013

5340-12-318-8533
Manual Control Handle

123188533
DIN99-M50: RNCC: 2 | RNVC: 2

22 Aug 1989

5340-12-391-2367
Spacing Threaded Standoff

123912367
5.17.354: RNCC: 3 | RNVC: 2

27 Feb 2013

5340-12-326-4364
Retaining Strap

123264364
4412432: RNCC: 3 | RNVC: 2
2.425366: RNCC: 5 | RNVC: 2

16 Sep 1991

5340-12-386-1471
Manual Control Lever

123861471
2481-391233.001.0: RNCC: 2 | RNVC: 2
2481-391233.001.0: RNCC: 3 | RNVC: 2

11 Aug 2011

5340-12-314-9998
Mounting Plate

123149998
2300223-264080.02.0: RNCC: 2 | RNVC: 2
2300223-264080.02.0: RNCC: 3 | RNVC: 2

7 Sep 1988

5340-12-322-3339
Filler Opening Cap

123223339
31.045.700-2: RNCC: 3 | RNVC: 2
4604700630: RNCC: 5 | RNVC: 2

13 Aug 1990

5340-12-385-9776
Manual Control Lever

123859776
2500262-323021.001.0: RNCC: 3 | RNVC: 2

27 Jul 2011

5340-12-386-5038
Access Cover

123865038
120D182007.000.0: RNCC: 2 | RNVC: 2
120D182007.000.0: RNCC: 3 | RNVC: 2
1792904: RNCC: 5 | RNVC: 2

7 Sep 2011

5340-12-342-7208
Strap Fastener Loop

123427208
VE TS 5,0: RNCC: 3 | RNVC: 2
VETS5,0: RNCC: 5 | RNVC: 9

19 Mar 1997

5340-12-327-2720
Mounting Plate

123272720
1350.6,5.01.411: RNCC: 3 | RNVC: 2
1350.6.5.01.411: RNCC: 5 | RNVC: 2

3 Jan 1992

5340-12-371-1101
Nonmetallic Bumper

123711101
2 0000-832: RNCC: 3 | RNVC: 2
2 0000-832: RNCC: 5 | RNVC: 2

13 Feb 2007

5340-12-166-6519
Helical Compression Spring Retainer

121666519
WW 414 484 B: RNCC: 1 | RNVC: 2
WW 414 484 B: RNCC: 3 | RNVC: 2
WW 414 484 B: RNCC: 3 | RNVC: 2
WW 414 484 B: RNCC: 3 | RNVC: 9
WW414484B: RNCC: 5 | RNVC: 9
WW414484B: RNCC: 5 | RNVC: 9

30 Sep 1976

5340-12-178-1421
Ball Socket Seat

121781421
4063370406: RNCC: 3 | RNVC: 2

22 Mar 1979

5340-12-040-2039

5340-12-311-9376
Loop Clamp

123119376
F11.11308-0001: RNCC: 3 | RNVC: 2

30 Oct 1987

5340-12-342-8160
Retaining Strap

123428160
R 237: RNCC: 3 | RNVC: 2
51.97401-6033: RNCC: 5 | RNVC: 2
51974016033: RNCC: 5 | RNVC: 2
51.97401.6033: RNCC: 5 | RNVC: 9

7 Apr 1997

5340-12-702-9339
Pawl Fastener

127029339
VG95211-ML-127029339: RNCC: 2 | RNVC: 2
8.689.008: RNCC: 3 | RNVC: 2
0500862793499: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-161-7277
Loop Clamp

121617277
DIN3016-1-B1-15X15-W1-2: RNCC: 2 | RNVC: 2
RS0.15/15: RNCC: 3 | RNVC: 2
DIN3016-B1-15X15-W1-2: RNCC: 3 | RNVC: 2
RS15-15: RNCC: 5 | RNVC: 2
RS15/15: RNCC: 5 | RNVC: 2
4100015015: RNCC: 5 | RNVC: 9
VG95931-B15X15-W1: RNCC: 5 | RNVC: 9
VG95931B15X15W1: RNCC: 5 | RNVC: 9
DIN3016-B1-15X15-W1-2: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-702-4644
Mounting Bracket

127024644
VG95211-ML-127024644: RNCC: 2 | RNVC: 2
5.51.0603.1313.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-703-3051
Rod End Connector

127033051
VG95211-ML-127033051: RNCC: 2 | RNVC: 2
5.12.0430.8013.98: RNCC: 3 | RNVC: 2

30 Mar 2000

5340-12-702-5695
Mounting Bracket

127025695
VG95211-ML-127025695: RNCC: 2 | RNVC: 2
5.51.7701.1090.91: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-6949
Angle Bracket

127016949
VG95211-ML-127016949: RNCC: 2 | RNVC: 2
5.12.7222.1007.01: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-308-2756
Expansion Plug

123082756
CZN663-6,3MS: RNCC: 3 | RNVC: 2
6,3CZN663: RNCC: 5 | RNVC: 2

23 Sep 1986

5340-12-322-9775
Access Cover

123229775
702-145600-901-0: RNCC: 3 | RNVC: 2

15 Oct 1990

5340-12-310-0083
Flare Lock Fastener

123100083
0224 3986: RNCC: 3 | RNVC: 2
02243986EE0155-57: RNCC: 5 | RNVC: 2
2243986: RNCC: 5 | RNVC: 2

27 Mar 1987

5340-12-351-6315
Access Cover

123516315
232-096817: RNCC: 3 | RNVC: 2
10030338: RNCC: 5 | RNVC: 2

10 Aug 2000

5340-12-193-9098
Turnbuckle

121939098
PAN4531A08D0909: RNCC: 3 | RNVC: 2

13 Sep 1982

5340-12-042-2064

5340-12-193-3458
Dust And Moisture Seal Protective Cap

121933458
01TC34228: RNCC: 3 | RNVC: 2

13 Jul 1982

5340-12-043-1304

5340-12-388-2174
Retaining Strap

123882174
947079: RNCC: 3 | RNVC: 2

2 Mar 2012

5340-12-302-2003
Nonmetallic Bumper

123022003
6175010095: RNCC: 3 | RNVC: 2

8 Dec 1984

5340-12-185-2938
Nonmetallic Bumper

121852938
3523260181: RNCC: 3 | RNVC: 2

25 Sep 1980

5340-12-183-9590
Rod End Clevis

121839590
43709465-601: RNCC: 3 | RNVC: 2

7 Jun 1980

5340-12-384-2901
Mechanical Stop

123842901
9233283001: RNCC: 3 | RNVC: 2
9233283001: RNCC: 5 | RNVC: 2
23950: RNCC: 5 | RNVC: 2

10 Feb 2011

5340-12-345-4810
Helical Compression Spring Seat

123454810
4713433805: RNCC: 3 | RNVC: 2
471.343.38.05: RNCC: 5 | RNVC: 2

24 Mar 1998

5340-12-197-2368
Elastic Cord Assembly

121972368
101745: RNCC: 3 | RNVC: 2

4 Oct 1983

5340-12-189-0387
Loop Clamp

121890387
9458921: RNCC: 3 | RNVC: 2
25188100000001: RNCC: 5 | RNVC: 2
F300 0T 001 2904: RNCC: 6 | RNVC: 9

19 Aug 1981

5340-12-372-0824
Angle Bracket

123720824
8411627: RNCC: 3 | RNVC: 2

18 Jun 2007

5340-12-350-4453
Clamping Catch

123504453
12747402: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-326-4569
Retaining Strap

123264569
371 387: RNCC: 3 | RNVC: 2
371387: RNCC: 5 | RNVC: 2

18 Sep 1991

5340-12-166-0872
Access Cover

121660872
02529: RNCC: 3 | RNVC: 2
02529: RNCC: 5 | RNVC: 9

29 Jul 1976

5340-12-359-0456
Door Handle

123590456
3817601059: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-12-372-4726
Retaining Strap

123724726
0003384845: RNCC: 3 | RNVC: 2

19 Jul 2007

5340-12-310-9700
Dust And Moisture Seal Protective Cap-Plug

123109700
900A7 RAL6014: RNCC: 3 | RNVC: 2
900007000-RAL6014: RNCC: 5 | RNVC: 2
GPN900,A7-RAL6014: RNCC: 5 | RNVC: 2
GPN900A7-RAL6014: RNCC: 5 | RNVC: 2

14 Jul 1987

5340-12-131-5635
Turnbuckle

121315635
DIN82004-A5-VERZINKT: RNCC: 2 | RNVC: 2
DIN82004-A5-ZN: RNCC: 3 | RNVC: 2
6500036V: RNCC: 5 | RNVC: 2
A5DIN82004VERZINKT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-313-5835
Webbing Strap

123135835
79017/026-1650-1075: RNCC: 3 | RNVC: 2
79017/026-1650-1075: RNCC: 5 | RNVC: 9

19 Apr 1988

5340-12-342-4427
Compression Cup

123424427
4491-1: RNCC: 3 | RNVC: 2
4491-1: RNCC: 5 | RNVC: 2

12 Feb 1997

5340-12-340-7920
Lock-Release Lever

123407920
4900371-601170.00: RNCC: 2 | RNVC: 2
4900371-601170.00: RNCC: 3 | RNVC: 2

13 Jun 1996

5340-12-353-4907
Mounting Plate

123534907
137M13001: RNCC: 3 | RNVC: 2
137 M13 001/1: RNCC: 5 | RNVC: 2

30 Mar 2001

5340-12-362-6160
Bow Handle

123626160
10024677: RNCC: 3 | RNVC: 2

12 Mar 2004

5340-12-387-8327
Quick Release Plunger

123878327
7087991: RNCC: 3 | RNVC: 2

1 Feb 2012

5340-12-358-8242
Plain Solid Disk

123588242
EZ154940: RNCC: 3 | RNVC: 2
15494001: RNCC: 5 | RNVC: 2

19 Nov 2002

5340-12-372-4534
Mounting Bracket

123724534
11251217701: RNCC: 3 | RNVC: 2

18 Jul 2007

5340-12-379-1122
Retaining Strap

123791122
13166015: RNCC: 3 | RNVC: 2
CV150593: RNCC: 5 | RNVC: 2
13166015: RNCC: 5 | RNVC: 2
P4442762: RNCC: 5 | RNVC: 2
13.166.015: RNCC: 5 | RNVC: 2

24 Jun 2009

5340-12-375-1557
Mending Plate

123751557
L851M2825205: RNCC: 3 | RNVC: 2

28 Apr 2008

5340-12-355-0867
Double Angle Bracket

123550867
5803935-60032: RNCC: 2 | RNVC: 2
5803935-60032: RNCC: 3 | RNVC: 2

4 Oct 2001

5340-12-300-2754
Nut And Bolt Locking Plate

123002754
27 0319 241: RNCC: 2 | RNVC: 2
9849971: RNCC: 3 | RNVC: 9
27 0319 241: RNCC: 5 | RNVC: 2
27 0319 241: RNCC: 5 | RNVC: 9

20 Jul 1984

5340-12-196-2547
Angle Bracket

121962547
03574100: RNCC: 3 | RNVC: 2

20 Jun 1983

5340-12-333-7085
Mounting Plate

123337085
5502370945: RNCC: 3 | RNVC: 2
5502370945: RNCC: 5 | RNVC: 2
5502370945: RNCC: 5 | RNVC: 2

27 Jan 1994

5340-12-337-0008
Nonmetallic Bumper

123370008
2500231-300000.001.0: RNCC: 2 | RNVC: 2
2500231-300000.001.0: RNCC: 3 | RNVC: 2
2500231-300000.001.0: RNCC: 5 | RNVC: 2

9 Jan 1995

5340-12-385-5345
Pipe Hanger

123855345
2300461-243010.000.0: RNCC: 2 | RNVC: 2
2300461-243010.000.0: RNCC: 3 | RNVC: 2

14 Jun 2011

5340-12-315-8767
Mending Plate

123158767
3819300364: RNCC: 3 | RNVC: 2
381 930 03 64: RNCC: 5 | RNVC: 2

3 Dec 1988

5340-12-334-3771
Access Cover

123343771
53.1532.015.00: RNCC: 3 | RNVC: 2

3 May 1994

5340-12-377-8472
Protection Bellows

123778472
1960641: RNCC: 3 | RNVC: 2

16 Feb 2009

5340-12-701-7994
Mounting Bracket

127017994
VG95211-ML-127017994: RNCC: 2 | RNVC: 2
5.12.8102.6009.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-328-9259
Manual Control Handle

123289259
5800177: RNCC: 3 | RNVC: 2
81.97001-6069: RNCC: 5 | RNVC: 2
81970016069: RNCC: 5 | RNVC: 2
580 K 0389: RNCC: 5 | RNVC: 2
580K0389: RNCC: 5 | RNVC: 2

1 Jul 1992

5340-12-701-3905
Loop Clamp

127013905
VG95211-ML-127013905: RNCC: 2 | RNVC: 2
5.12.5311.1000.11: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-4987
Mounting Bracket

127014987
VG95211-ML-127014987: RNCC: 2 | RNVC: 2
5.12.5850.4230.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-314-4720
Mounting Bracket

123144720
SK401-000016.000.0: RNCC: 3 | RNVC: 2
SK401-000016.000.0: RNCC: 5 | RNVC: 9

9 Jul 1988

5340-12-331-2332
Retaining Strap

123312332
VG95933BR-28-W1-BK: RNCC: 2 | RNVC: 2
1/1G28MMN325: RNCC: 3 | RNVC: 2
MMN325-1-1G8-28: RNCC: 5 | RNVC: 2
1/1G8-28MMN325: RNCC: 5 | RNVC: 2
MMN325-1-1G8-28: RNCC: 5 | RNVC: 2

6 Apr 1993

5340-12-175-9158
Platte

121759158
12729-13500.003: RNCC: 2 | RNVC: 2
12729-13500.003: RNCC: 3 | RNVC: 2
12729-13500-003: RNCC: 5 | RNVC: 2
12729-13500-003: RNCC: 5 | RNVC: 9

25 Oct 1978

5340-12-305-0501
Access Cover

123050501
5801759-051000.000: RNCC: 2 | RNVC: 2
5801759-051000.000: RNCC: 3 | RNVC: 2
5801759-051000.000: RNCC: 5 | RNVC: 9

20 Sep 1985

5340-12-380-3819
Mounting Plate

123803819
4100036-151158.000.0: RNCC: 2 | RNVC: 2
4100036-151158.000.0: RNCC: 3 | RNVC: 2

26 Oct 2009

5340-12-701-6370
Mounting Plate

127016370
VG95211-ML-127016370: RNCC: 2 | RNVC: 2
5.12.7070.1220.15: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-3215
Mounting Plate

127013215
VG95211-ML-127013215: RNCC: 2 | RNVC: 2
5.12.5101.8049.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-6864
Loop Clamp

127016864
VG95211-ML-127016864: RNCC: 2 | RNVC: 2
5.12.7220.2080.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-154-6909
Spring Tension Clip

121546909
7-34-7-17-60-00-07: RNCC: 3 | RNVC: 2
109232-176000-07: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-366-4930
Manual Control Handle

123664930
6-30-MAB-01.02: RNCC: 3 | RNVC: 2

28 Apr 2005

5340-12-702-4031
Mounting Bracket

127024031
VG95211-ML-127024031: RNCC: 2 | RNVC: 2
5.12.5850.3240.91: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-344-4976
Mending Plate

123444976
81974850350: RNCC: 3 | RNVC: 2
81.97485.0350: RNCC: 5 | RNVC: 2

3 Nov 1997

5340-12-135-7262

5340-12-345-4457
Mounting Bracket

123454457
54.0053.243.00: RNCC: 3 | RNVC: 2

17 Mar 1998

5340-12-383-5964
Mounting Bracket

123835964
2425703006: RNCC: 3 | RNVC: 2

11 Nov 2010

5340-12-340-6930
Nonmetallic Bumper

123406930
84503 41808: RNCC: 2 | RNVC: 2
8450341808: RNCC: 3 | RNVC: 2
84503 41808: RNCC: 5 | RNVC: 9

24 May 1996

5340-12-041-0754

5340-12-366-0373
Mounting Bracket

123660373
9436600114: RNCC: 3 | RNVC: 2

2 Mar 2005

5340-12-171-2326
Retaining Strap

121712326
06670630210: RNCC: 3 | RNVC: 2

21 Sep 1977

5340-12-353-9258
Access Cover

123539258
6809480: RNCC: 3 | RNVC: 2
6809480PR: RNCC: 5 | RNVC: 2

18 May 2001

5340-12-308-3042
Mending Plate

123083042
7161601: RNCC: 3 | RNVC: 2

24 Sep 1986

5340-12-379-4047
Mending Plate

123794047
0001881546: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-12-702-2187
Mounting Bracket

127022187
VG95211-ML-127022187: RNCC: 2 | RNVC: 2
30.7225.55: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-314-3526
Mending Plate

123143526
3173-1331: RNCC: 3 | RNVC: 2
F3-SN71.310: RNCC: 5 | RNVC: 2

29 Jun 1988

5340-12-159-7724
Dust And Moisture Seal Protective Plug

121597724
25036581: RNCC: 3 | RNVC: 2
14021-15009-05: RNCC: 5 | RNVC: 9
893667: RNCC: 8 | RNVC: 2

30 May 1969

5340-12-310-3151
Nonmetallic Bumper

123103151
81.96020.0202: RNCC: 3 | RNVC: 2
82200-81.96020.0202.NR45: RNCC: 3 | RNVC: 2

8 May 1987

5340-12-196-6007
Nonmetallic Bumper

121966007
2500057-500000.07: RNCC: 2 | RNVC: 2
2500057-500000.07: RNCC: 3 | RNVC: 2
2500057-500000.07: RNCC: 3 | RNVC: 2
2500057-500000.07: RNCC: 3 | RNVC: 2
2500057-500000-07: RNCC: 5 | RNVC: 9

21 Jul 1983

5340-12-143-7931
Resilient Mount

121437931
845-8E32399.0.084-CR55.ST: RNCC: 3 | RNVC: 2
8E32399-0-084: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-383-1746
Swivel Caster

123831746
SMJ 235-004-101-102-350: RNCC: 3 | RNVC: 2
SMJ235-004-101-102-350: RNCC: 5 | RNVC: 2

22 Sep 2010

5340-12-307-6606
Mending Plate

123076606
2300061-051800.002: RNCC: 2 | RNVC: 2
2300061-051800.002: RNCC: 3 | RNVC: 2
2300061-051800-002: RNCC: 5 | RNVC: 9

14 Jul 1986

5340-12-315-1901
Angle Bracket

123151901
6162950240: RNCC: 3 | RNVC: 2
616 295 02 40: RNCC: 5 | RNVC: 2

28 Sep 1988

5340-12-198-9583
Pad Eye

121989583
001-111-23: RNCC: 3 | RNVC: 2

15 Mar 1984

5340-12-392-2923
Cushioning Pad

123922923
7000129: RNCC: 3 | RNVC: 2

23 May 2013

5340-12-302-2004
Nonmetallic Bumper

123022004
6175010195: RNCC: 3 | RNVC: 2

8 Dec 1984

5340-12-376-8955
Angle Bracket

123768955
160.03.0325: RNCC: 3 | RNVC: 2
300.062.304: RNCC: 5 | RNVC: 2

17 Nov 2008

5340-12-358-5477
Angle Bracket

123585477
5411550895: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-12-324-7663
Nonmetallic Bumper

123247663
2500171-452000.02: RNCC: 2 | RNVC: 2
2500171-452000.02: RNCC: 3 | RNVC: 2
2500171-452000.02: RNCC: 3 | RNVC: 2

22 Mar 1991

5340-12-350-0122
Access Cover

123500122
19190: RNCC: 3 | RNVC: 2

4 Feb 2000

5340-12-360-0469
Access Cover

123600469
9416890839: RNCC: 3 | RNVC: 2

1 Apr 2003

5340-12-378-4294
Lock Bolt

123784294
65000323: RNCC: 3 | RNVC: 2

3 Apr 2009

5340-12-025-5645

5340-12-182-9735
Retaining Band

121829735
490107: RNCC: 3 | RNVC: 2
PACKFIXIV350: RNCC: 5 | RNVC: 2
7830002: RNCC: 5 | RNVC: 2
7830002: RNCC: 5 | RNVC: 2

11 Mar 1980

5340-12-183-0752
Access Cover

121830752
0287 5870: RNCC: 3 | RNVC: 2
2875870: RNCC: 5 | RNVC: 2
2875870EE0693-78: RNCC: 5 | RNVC: 2

18 Mar 1980

5340-12-375-8351
Mounting Bracket

123758351
056615: RNCC: 3 | RNVC: 2

9 Jul 2008

5340-12-121-0125

5340-12-381-9076
Multiple Angle Bracket

123819076
000605-200000.11: RNCC: 2 | RNVC: 2

16 Apr 2010

5340-12-197-9375
Metal Runner

121979375
CF 478 237 B: RNCC: 2 | RNVC: 2
CF 478 237 B: RNCC: 3 | RNVC: 2
CF 478 237: RNCC: 5 | RNVC: 2
CF 478 237 A: RNCC: 5 | RNVC: 2
CF 478 237 B: RNCC: 5 | RNVC: 2
CF 478 237: RNCC: 5 | RNVC: 2
CF 478 237 A: RNCC: 5 | RNVC: 2

2 Dec 1983

5340-12-195-0170
Nonmetallic Bumper

121950170
0435304: RNCC: 3 | RNVC: 2
043.5304: RNCC: 5 | RNVC: 2
KBJ90402-1: RNCC: 5 | RNVC: 2

30 Dec 1982

5340-12-392-4345
Mounting Bracket

123924345
204170: RNCC: 3 | RNVC: 2
7 009 515 202: RNCC: 5 | RNVC: 2

7 Jun 2013

5340-12-166-4861
Handwheel

121664861
4-72933: RNCC: 3 | RNVC: 2

15 Sep 1976

5340-12-310-2821
Helical Compression Spring Seat

123102821
1216 7548: RNCC: 3 | RNVC: 2
12167548: RNCC: 5 | RNVC: 9
6.420.0.365.003.4: RNCC: 5 | RNVC: 9

5 May 1987

5340-12-316-9125
Mending Plate

123169125
000.918.58.10: RNCC: 3 | RNVC: 2
138560: RNCC: 5 | RNVC: 2

22 Feb 1989

5340-12-324-5754
Metallic Bumper

123245754
23219: RNCC: 3 | RNVC: 2

28 Feb 1991

5340-12-302-6712
Nonmetallic Bumper

123026712
1230004700: RNCC: 3 | RNVC: 2

22 Jan 1985

5340-12-335-5345
Retaining Band

123355345
4634700340: RNCC: 3 | RNVC: 2

30 Aug 1994

5340-12-336-2807
Bow Handle

123362807
SW8001G054: RNCC: 3 | RNVC: 2
SW8001G054: RNCC: 5 | RNVC: 9

7 Nov 1994

5340-12-319-2891
Metallic Solid Wheel

123192891
1700001-0.12A: RNCC: 2 | RNVC: 2
105.590: RNCC: 3 | RNVC: 2
030057: RNCC: 5 | RNVC: 2

19 Sep 1989

5340-12-363-7073
Door Closer

123637073
TS83 EN7BC/OED 83050101: RNCC: 3 | RNVC: 2

16 Jul 2004

5340-12-321-9213
Lock-Release Lever

123219213
P-886741-401: RNCC: 3 | RNVC: 2
P886741-401: RNCC: 5 | RNVC: 2

10 Jul 1990

5340-12-701-7642
Mending Plate

127017642
VG95211-ML-127017642: RNCC: 2 | RNVC: 2
5.12.7701.8060.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-168-5678
Door Handle

121685678
1000025-260000-21: RNCC: 3 | RNVC: 2
1000025-260000.21: RNCC: 3 | RNVC: 2
1000025-260000-21: RNCC: 5 | RNVC: 9
1000025-260000.21: RNCC: 5 | RNVC: 9

23 Mar 1977

5340-12-177-2798
Spring Tension Clip

121772798
2300002-122800.006: RNCC: 2 | RNVC: 2
2300002-122800.006: RNCC: 3 | RNVC: 2
2300002-122800-006: RNCC: 5 | RNVC: 9
2300002-122800.006: RNCC: 5 | RNVC: 9
2300002-122800.006: RNCC: 5 | RNVC: 9

24 Jan 1979

5340-12-338-3456
Mounting Plate

123383456
6600155-420000.03: RNCC: 2 | RNVC: 2
9892 353: RNCC: 3 | RNVC: 9

26 Jun 1995

5340-12-343-1304
Handwheel

123431304
NO PRIMARY REF 12-343-1304: RNCC: 3 | RNVC: 2
G160X12VDIN955: RNCC: 5 | RNVC: 9
DIN955-G160X12V: RNCC: 5 | RNVC: 9

6 May 1997

5340-12-324-4175
Door Holder

123244175
7068-41840-000-2: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-12-393-6807
Pipe Bracket

123936807
11.23444-0073: RNCC: 3 | RNVC: 2
11.23444-0073: RNCC: 5 | RNVC: 2

2 Oct 2013

5340-12-702-4213
Angle Bracket

127024213
VG95211-ML-127024213: RNCC: 2 | RNVC: 2
5.12.7080.1450.09: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-4955
Rod End Connector

127014955
VG95211-ML-127014955: RNCC: 2 | RNVC: 2
5.12.5850.1750.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-370-4874
Mechanical Stop

123704874
492-190130.000: RNCC: 3 | RNVC: 2

14 Nov 2006

5340-12-347-6027
Mounting Bracket

123476027
8854 130-181: RNCC: 3 | RNVC: 2

13 Jan 1999

5340-12-368-4722
Angle Bracket

123684722
J28130071-407: RNCC: 3 | RNVC: 2

15 Mar 2006

5340-12-303-3435
Electrical-Mechanical Equipment Post

123033435
42431-003: RNCC: 3 | RNVC: 2
VG95148C8XM3X10: RNCC: 5 | RNVC: 2
42 431-003: RNCC: 5 | RNVC: 9

15 Mar 1985

5340-12-343-7138
Hinge Torsion Bar

123437138
P-231995-053: RNCC: 3 | RNVC: 2
P 231995-053: RNCC: 5 | RNVC: 2
P231995-053: RNCC: 5 | RNVC: 2

17 Jul 1997

5340-12-317-3182
Mounting Bracket

123173182
4900064-4111.026: RNCC: 3 | RNVC: 2

29 Mar 1989

5340-12-199-0307
Angle Bracket

121990307
5801549-2110.003: RNCC: 3 | RNVC: 2

21 Mar 1984

5340-12-356-7532
Rod End Clevis

123567532
33036-003-004: RNCC: 3 | RNVC: 2

3 Apr 2002

5340-12-331-5471
Door Handle

123315471
5800043: RNCC: 3 | RNVC: 2
1490-5623.02: RNCC: 5 | RNVC: 2
1490-5623.02: RNCC: 5 | RNVC: 2

18 May 1993

5340-12-312-2362
Dust And Moisture Seal Protective Cap

123122362
251482010005: RNCC: 3 | RNVC: 2
251482010005: RNCC: 5 | RNVC: 2
0008310095: RNCC: 5 | RNVC: 2

7 Dec 1987

5340-12-358-6071
Mounting Bracket

123586071
310.12.0151: RNCC: 3 | RNVC: 2

29 Oct 2002

5340-12-352-7727
Detent Plunger

123527727
2433124380: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-12-358-9599
Window Regulator Handle

123589599
6418100454: RNCC: 3 | RNVC: 2

3 Dec 2002

5340-12-366-2955
Mounting Plate

123662955
104150: RNCC: 3 | RNVC: 2

6 Apr 2005

5340-12-301-7918
Loop Clamp

123017918
0335 1412: RNCC: 3 | RNVC: 2
3351412EE5022-71: RNCC: 5 | RNVC: 2
E33571166: RNCC: 5 | RNVC: 2
03351412: RNCC: 5 | RNVC: 2

9 Nov 1984

5340-12-043-1911

5340-12-372-6866
Access Cover

123726866
8800351476: RNCC: 3 | RNVC: 2

13 Aug 2007

5340-12-166-0299
Helical Compression Spring Seat

121660299
012010100800: RNCC: 3 | RNVC: 2

24 Jul 1976

5340-12-353-7183
Angle Bracket

123537183
J92224241-001: RNCC: 3 | RNVC: 2

2 May 2001

5340-12-329-5847
Dust And Moisture Seal Protective Cap

123295847
95048-140-023-011: RNCC: 3 | RNVC: 2
95048-140-023-011: RNCC: 5 | RNVC: 9

4 Sep 1992

5340-12-702-2225
Mounting Bracket

127022225
VG95211-ML-127022225: RNCC: 2 | RNVC: 2
30.7601.390: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-350-1339
Access Cover

123501339
V6520-03009-126: RNCC: 3 | RNVC: 2

18 Feb 2000

5340-12-384-3985
Access Door Hinge

123843985
H1.1289-27-14-00.10-00: RNCC: 3 | RNVC: 2

21 Feb 2011

5340-12-306-5799
Beam Gripping Clamp

123065799
209-122: RNCC: 3 | RNVC: 2

12 Mar 1986

5340-12-348-8719
Mounting Bracket

123488719
245/7346-51-00-02: RNCC: 3 | RNVC: 2

30 Aug 1999

5340-12-363-9082
Angle Bracket

123639082
J92228344-401: RNCC: 3 | RNVC: 2

4 Aug 2004

5340-12-314-6712
Electrical-Mechanical Equipment Post

123146712
512214-3769.000: RNCC: 3 | RNVC: 2
512214-3769: RNCC: 5 | RNVC: 2

28 Jul 1988

5340-12-361-4141
Retaining Band

123614141
319400.0020: RNCC: 3 | RNVC: 2
909134401: RNCC: 5 | RNVC: 2

25 Sep 2003

5340-12-316-1887
Mounting Bracket

123161887
3855200733: RNCC: 3 | RNVC: 2

29 Dec 1988

5340-12-313-8217
Mounting Bracket

123138217
3512 711 41802: RNCC: 3 | RNVC: 2
3512 711 4180: RNCC: 5 | RNVC: 2

10 May 1988

5340-12-393-8516
Mounting Bracket

123938516
1103345: RNCC: 3 | RNVC: 2

16 Oct 2013

5340-12-341-9090
Mounting Plate

123419090
506575: RNCC: 3 | RNVC: 2

14 Nov 1996

5340-12-365-2638
Mounting Bracket

123652638
2300109-064810.000.0: RNCC: 3 | RNVC: 2

14 Dec 2004

5340-12-309-5817
Nonmetallic Bumper

123095817
3403300075: RNCC: 3 | RNVC: 2
80725-3403300075: RNCC: 5 | RNVC: 2

4 Feb 1987

5340-12-170-2366
Spring Tension Clip

121702366
LN29789-24: RNCC: 2 | RNVC: 2

5 Jul 1977

5340-12-196-4520
Bridge Clamp

121964520
C22117-A163-C4: RNCC: 3 | RNVC: 2
C22117A163C4: RNCC: 5 | RNVC: 2

7 Jul 1983

5340-12-312-4535
Bridge Clamp

123124535
2300194-180100.002: RNCC: 2 | RNVC: 2
2300194-180100.002: RNCC: 3 | RNVC: 2
2300194-180100.002: RNCC: 5 | RNVC: 9
9843503: RNCC: 5 | RNVC: 9
2300194-180100.002: RNCC: 5 | RNVC: 9

8 Jan 1988

5340-12-177-2801
Angle Bracket

121772801
2300002-122200.003: RNCC: 2 | RNVC: 2
2300002-122200.003: RNCC: 3 | RNVC: 2
2300002-122200.003: RNCC: 3 | RNVC: 2
2300002-122200-003: RNCC: 5 | RNVC: 9
2300002-122200.003: RNCC: 5 | RNVC: 9

24 Jan 1979

5340-12-335-3285
Quick Release Plunger

123353285
GN616-M8-K: RNCC: 3 | RNVC: 2
03050-08: RNCC: 3 | RNVC: 2
RBN410.2-M8-DELRIN: RNCC: 3 | RNVC: 2
305-08: RNCC: 5 | RNVC: 9
NLM305-08: RNCC: 5 | RNVC: 9
NLM3050-08: RNCC: 5 | RNVC: 9

10 Aug 1994

5340-12-177-4104
Double Angle Bracket

121774104
2300002-122100.070: RNCC: 2 | RNVC: 2
2300002-122100.070: RNCC: 3 | RNVC: 2
2300002-122100-070: RNCC: 5 | RNVC: 9
2300002-122100.070: RNCC: 5 | RNVC: 9

31 Jan 1979

5340-12-339-1670
Retaining Strap

123391670
9896465: RNCC: 3 | RNVC: 9
463-223400.003: RNCC: 5 | RNVC: 9

20 Oct 1995

5340-12-338-7670
Butt Hinge Leaf

123387670
9865998: RNCC: 3 | RNVC: 9
462-206060.010: RNCC: 5 | RNVC: 9

23 Aug 1995

5340-12-301-9057
Double Angle Bracket

123019057
2300002-181051.003: RNCC: 2 | RNVC: 2
2300002-181051.003: RNCC: 3 | RNVC: 2
2300002-181051.003: RNCC: 5 | RNVC: 9
2300002-181051.003: RNCC: 5 | RNVC: 9
2300002-181051-003: RNCC: 5 | RNVC: 9

16 Nov 1984

5340-12-323-9700
Lock-Release Lever

123239700
2300002-187122.000: RNCC: 2 | RNVC: 2
2300002-187122.000: RNCC: 3 | RNVC: 2
2300002-187122.000: RNCC: 5 | RNVC: 9
2300002-187122.000: RNCC: 5 | RNVC: 9

11 Jan 1991

5340-12-349-3267
Swivel Caster

123493267
441I08R200CZPK: RNCC: 3 | RNVC: 2
JN7567-J: RNCC: 5 | RNVC: 2
441I08R200C2PK: RNCC: 5 | RNVC: 2

27 Oct 1999

5340-12-305-6173
Door Handle

123056173
580B128: RNCC: 3 | RNVC: 2
CF 429 385 -R: RNCC: 5 | RNVC: 2
CF 429 385 -R: RNCC: 5 | RNVC: 2

27 Nov 1985

5340-12-347-8713
Strap Hinge

123478713
1106/32: RNCC: 3 | RNVC: 2
5L.3721.002.36: RNCC: 5 | RNVC: 2

1 Mar 1999

5340-12-348-2838
Mounting Bracket

123482838
5200.130.020.005: RNCC: 3 | RNVC: 2

25 May 1999

5340-12-302-6631
Retaining Strap

123026631
52.0259.280.00: RNCC: 3 | RNVC: 2

22 Jan 1985

5340-12-316-5990
Mending Plate

123165990
6378496: RNCC: 3 | RNVC: 2

27 Jan 1989

5340-12-302-6904
Double Angle Bracket

123026904
1042000100: RNCC: 3 | RNVC: 2

23 Jan 1985

5340-12-325-3991
Angle Bracket

123253991
525461008: RNCC: 3 | RNVC: 2
52 546 1008: RNCC: 5 | RNVC: 2

3 Jun 1991

5340-12-196-1258
Rod End Clevis

121961258
8958015132: RNCC: 3 | RNVC: 2
ML40092: RNCC: 5 | RNVC: 2

1 Jun 1983

5340-12-359-2282
Rod End Clevis

123592282
GN751-14-28-M14-B: RNCC: 3 | RNVC: 2

14 Jan 2003

5340-12-347-7125
Expansion Plug

123477125
DIN443-17-ST-PHR: RNCC: 2 | RNVC: 2
0630 361 053: RNCC: 5 | RNVC: 2
0630361053: RNCC: 5 | RNVC: 9

1 Feb 1999

5340-12-376-2689
Nut And Bolt Locking Plate

123762689
21371-04: RNCC: 3 | RNVC: 2

3 Sep 2008

5340-12-335-4421
Mounting Plate

123354421
073-450480-901-0: RNCC: 2 | RNVC: 2
073-450480-901-0: RNCC: 3 | RNVC: 2

18 Aug 1994

5340-12-309-9570
Pipe Bracket

123099570
R04250-109: RNCC: 3 | RNVC: 2

23 Mar 1987

5340-12-702-1951
Loop Clamp

127021951
VG95211-ML-127021951: RNCC: 2 | RNVC: 2
30.7210.1030: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-322-6551
Plug Button

123226551
279.617 256: RNCC: 3 | RNVC: 2
1392253-121013: RNCC: 5 | RNVC: 9

10 Sep 1990

5340-12-337-2259
Bow Handle

123372259
61L13-1-1AA: RNCC: 3 | RNVC: 2
91386707: RNCC: 5 | RNVC: 2

3 Feb 1995

5340-12-391-0506
Retaining Strap

123910506
PTG-Z-900-U06: RNCC: 3 | RNVC: 2

18 Jan 2013

5340-12-701-6498
Angle Bracket

127016498
VG95211-ML-127016498: RNCC: 2 | RNVC: 2
5.12.7205.1070.92: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-702-5395
Mounting Bracket

127025395
VG95211-ML-127025395: RNCC: 2 | RNVC: 2
5.51.7204.1720.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-316-6566
Catch Strike

123166566
80-600.136: RNCC: 3 | RNVC: 2
703.001633: RNCC: 5 | RNVC: 2
80-600.136: RNCC: 5 | RNVC: 9

31 Jan 1989

5340-12-701-8038
Mounting Bracket

127018038
VG95211-ML-127018038: RNCC: 2 | RNVC: 2
5.12.8605.0920.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-318-7929
Mending Plate

123187929
00.8200-2.00-02: RNCC: 3 | RNVC: 2

17 Aug 1989

5340-12-348-9270
Mounting Bracket

123489270
245/7383-02-45-00: RNCC: 3 | RNVC: 2

2 Sep 1999

5340-12-702-4584
Mounting Bracket

127024584
VG95211-ML-127024584: RNCC: 2 | RNVC: 2
5.51.0603.0018.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-376-1696
Manual Control Lever

123761696
2500310-183740.018.0: RNCC: 3 | RNVC: 2

20 Aug 2008

5340-12-359-6787
Mounting Plate

123596787
2500261-180000.062.0: RNCC: 2 | RNVC: 2
2500261-180000.062.0: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-12-702-5195
Mounting Bracket

127025195
VG95211-ML-127025195: RNCC: 2 | RNVC: 2
5.51.7002.0020.92: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-386-9602
Mounting Bracket

123869602
P-076170-019: RNCC: 3 | RNVC: 2
17154089: RNCC: 5 | RNVC: 2

20 Oct 2011

5340-12-370-2138
Spring Loaded Cylinder Fastener

123702138
1922-191039.000.0: RNCC: 2 | RNVC: 2
1922-191039.000.0: RNCC: 3 | RNVC: 2

4 Oct 2006

5340-12-700-6256
Flush Lock

127006256
VG95211-ML-127006256: RNCC: 2 | RNVC: 2
5.12.0100.2680.00: RNCC: 3 | RNVC: 2
0501400106639: RNCC: 5 | RNVC: 2

30 Sep 1992

5340-12-360-6772
Mounting Plate

123606772
9997036-990100.010.0: RNCC: 3 | RNVC: 2

27 Jun 2003

5340-12-337-1165
Angle Bracket

123371165
2300122-187000.006.0: RNCC: 2 | RNVC: 2
2300122-187000.006.0: RNCC: 3 | RNVC: 2
2300122-187000.006.0: RNCC: 5 | RNVC: 2

19 Jan 1995

5340-12-380-2602
Access Cover

123802602
4100037-181153.000.0: RNCC: 2 | RNVC: 2
4100037-181153.000.0: RNCC: 3 | RNVC: 2

12 Oct 2009

5340-12-359-5276
Rod End Clevis

123595276
EL670.01.016: RNCC: 3 | RNVC: 2

13 Feb 2003

5340-12-092-3155

5340-12-351-3256
Flush Lock

123513256
2416ZM RECHTS: RNCC: 3 | RNVC: 2
105860: RNCC: 5 | RNVC: 2

13 Jul 2000

5340-12-350-3420
Retaining Strap

123503420
54.1038.043.00: RNCC: 2 | RNVC: 2
54.1038.043.00: RNCC: 3 | RNVC: 2

17 Mar 2000

5340-12-320-1527
Access Cover

123201527
1668801: RNCC: 3 | RNVC: 2
GZ16688A: RNCC: 5 | RNVC: 2

13 Dec 1989

5340-12-335-5324
Double Angle Bracket

123355324
6011594240: RNCC: 3 | RNVC: 2

30 Aug 1994

5340-12-194-4324
Sliding Door Hanger

121944324
211843342B: RNCC: 3 | RNVC: 2

3 Nov 1982

5340-12-327-8377
Mounting Bracket

123278377
019077109: RNCC: 3 | RNVC: 2

11 Mar 1992

5340-12-179-1591
Resilient Mount

121791591
786031BL3: RNCC: 3 | RNVC: 2
57860310041: RNCC: 5 | RNVC: 2
0008900601: RNCC: 5 | RNVC: 2
0008900601: RNCC: 5 | RNVC: 2

11 Jun 1979

5340-12-380-2078
Bumper

123802078
S943M3064211: RNCC: 3 | RNVC: 2

6 Oct 2009

5340-12-179-2450
Mounting Bracket

121792450
2483801: RNCC: 3 | RNVC: 2

18 Jun 1979

5340-12-177-6139
Detent Plunger

121776139
WW419280: RNCC: 3 | RNVC: 9
WW 419 280: RNCC: 5 | RNVC: 2
WW419280: RNCC: 5 | RNVC: 2
WW 419 280: RNCC: 5 | RNVC: 9

9 Feb 1979

5340-12-180-4518
Nonmetallic Bumper

121804518
1G0169: RNCC: 3 | RNVC: 2
0019875540: RNCC: 5 | RNVC: 2
001 987 55 40: RNCC: 5 | RNVC: 2

12 Sep 1979

5340-12-313-8216
Access Cover

123138216
3512 711 41682: RNCC: 3 | RNVC: 2

10 May 1988

5340-12-366-8142
Dust And Moisture Seal Protective Cover

123668142
CBD45094P07: RNCC: 3 | RNVC: 2

13 Jun 2005

5340-12-340-8450
Dust And Moisture Seal Protective Cap

123408450
86/0600-50CR/879: RNCC: 3 | RNVC: 2
D184081801: RNCC: 5 | RNVC: 2
86/0600: RNCC: 5 | RNVC: 2
184081801: RNCC: 5 | RNVC: 2

21 Jun 1996

5340-12-159-1335
Bridge Clamp

121591335
TWH04-223: RNCC: 3 | RNVC: 2
Q731821003: RNCC: 5 | RNVC: 2
TWH04-223: RNCC: 5 | RNVC: 2
TWH04-223: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-189-9802
Nonmetallic Bumper

121899802
62.6750.445.00-A001: RNCC: 3 | RNVC: 2
202309: RNCC: 5 | RNVC: 2
62-6750-445-00A001: RNCC: 5 | RNVC: 2
62.6750.445.00A001: RNCC: 5 | RNVC: 2
C42300-A67-B43: RNCC: 5 | RNVC: 2

2 Nov 1981

5340-12-307-1044
Dust And Moisture Seal Protective Cap

123071044
399236: RNCC: 3 | RNVC: 2
7193-0010-399236: RNCC: 5 | RNVC: 2
909734414: RNCC: 5 | RNVC: 2

9 May 1986

5340-12-335-6759
Catch Strike

123356759
073-251150-000-0: RNCC: 2 | RNVC: 2
073-251150-000-0: RNCC: 3 | RNVC: 2

12 Sep 1994

5340-12-350-4188
Butt Hinge Leaf

123504188
J52424535-001: RNCC: 3 | RNVC: 2

29 Mar 2000

5340-12-330-9103
Shimmy Damper

123309103
NO PRIMARY REF 12-330-9103: RNCC: 3 | RNVC: 2
23-274.55: RNCC: 5 | RNVC: 9

24 Feb 1993

5340-12-701-6454
Angle Bracket

127016454
VG95211-ML-127016454: RNCC: 2 | RNVC: 2
5.12.7204.0860.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-331-3149
Door Handle

123313149
1098-U1: RNCC: 3 | RNVC: 2
701-7040: RNCC: 3 | RNVC: 2
1098-00: RNCC: 5 | RNVC: 2

21 Apr 1993

5340-12-358-5379
Dust And Moisture Seal Protective Cap

123585379
770 561 002: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-12-389-0672
Expansion Shield

123890672
920674: RNCC: 3 | RNVC: 2
920674: RNCC: 5 | RNVC: 2
07400705: RNCC: 5 | RNVC: 2
2500599991: RNCC: 5 | RNVC: 2

23 May 2012

5340-12-357-6888
Mounting Bracket

123576888
068130147Q: RNCC: 3 | RNVC: 2

12 Jul 2002

5340-12-364-1606
Bridge Clamp

123641606
1076-19: RNCC: 3 | RNVC: 2

26 Aug 2004

5340-12-319-4971
Catch Strike

123194971
50CG: RNCC: 3 | RNVC: 2
50CG: RNCC: 5 | RNVC: 2
50C: RNCC: 5 | RNVC: 2

6 Oct 1989

5340-12-025-0584

5340-12-134-0450
Retaining Strap

121340450
K17723: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-326-3906
Angle Bracket

123263906
3963000240: RNCC: 3 | RNVC: 2
396 300 02 40: RNCC: 5 | RNVC: 2

10 Sep 1991

5340-12-027-2080

5340-12-042-5330

5340-12-356-7690
Mounting Plate

123567690
09435704: RNCC: 3 | RNVC: 2

4 Apr 2002

5340-12-349-3898
Access Cover

123493898
T524M1225101: RNCC: 3 | RNVC: 2

9 Nov 1999

5340-12-321-7007
Butt Hinge

123217007
1054-U1: RNCC: 3 | RNVC: 2
704255977: RNCC: 3 | RNVC: 2
217-9001: RNCC: 3 | RNVC: 2

18 Jun 1990

5340-12-317-4188
Angle Bracket

123174188
P-145502-031: RNCC: 3 | RNVC: 2
P145502-031: RNCC: 5 | RNVC: 2

6 Apr 1989

5340-12-301-5651
Electrical-Mechanical Equipment Post

123015651
WL2493: RNCC: 3 | RNVC: 9
2493-01/4: RNCC: 5 | RNVC: 9
WL-2493: RNCC: 5 | RNVC: 9
WL2493: RNCC: 5 | RNVC: 9
2493-01/4: RNCC: 5 | RNVC: 9

24 Oct 1984

5340-12-187-1725
Nonmetallic Bumper

121871725
5-612-0394: RNCC: 3 | RNVC: 2
5-612-0394-3: RNCC: 5 | RNVC: 2

9 Mar 1981

5340-12-310-2065
Angle Bracket

123102065
S35622-01-6-229: RNCC: 3 | RNVC: 2

21 Apr 1987

5340-12-703-3084
Mounting Bracket

127033084
VG95211-ML-127033084: RNCC: 2 | RNVC: 2
5.12.2210.1711.01: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-377-4904
Spacing Threaded Standoff

123774904
8605001.3.541.05: RNCC: 3 | RNVC: 2
8605001354105: RNCC: 5 | RNVC: 2

20 Jan 2009

5340-12-372-7886
Mounting Bracket

123727886
AKDK3-2: RNCC: 3 | RNVC: 2

21 Aug 2007

5340-12-388-1313
Mounting Bracket

123881313
1690-492100.003.0: RNCC: 3 | RNVC: 2

27 Feb 2012

5340-12-388-1912
Angle Bracket

123881912
1030105-206200.008.0: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-12-312-3020
Nonmetallic Bumper

123123020
2300074-4179.00: RNCC: 2 | RNVC: 2
2300074-4179.00: RNCC: 3 | RNVC: 2
2300074-4179.00: RNCC: 5 | RNVC: 9
2300074-4179.00: RNCC: 5 | RNVC: 9

14 Dec 1987

5340-12-143-2719
Gewindeeinsatz

5340-12-141-4468
Federkraft- Klipp

5340-12-142-3698
Leder- Riemen

5340-12-132-9138
Kugelzapfen Sitz

5340-12-133-2820
Bild Aufhaenger

5340-12-166-1296
Nichtmetall Puffer

5340-12-028-5993

5340-12-306-2198
Helical Compression Spring Retainer

123062198
1865-010510.28.0: RNCC: 3 | RNVC: 9

7 Feb 1986

5340-12-361-6239
Loop Clamp

123616239
DIN3015-ZD2R-18-18-PA-W5: RNCC: 2 | RNVC: 2

27 Oct 2003

5340-12-315-4912
Dust And Moisture Seal Protective Cap

123154912
4900153-11191-00-03: RNCC: 3 | RNVC: 2
4900153-11191-03: RNCC: 5 | RNVC: 9

29 Oct 1988

5340-12-162-3795
Rod End Clevis

121623795
5800359-010116-03: RNCC: 3 | RNVC: 2
5800359-010116-03: RNCC: 5 | RNVC: 9
5800359-010116.03: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-184-3355
Headless Straight Rod

121843355
5801352-1860.00: RNCC: 2 | RNVC: 2
5801352-1860.00: RNCC: 3 | RNVC: 2
5801352-1860-00: RNCC: 5 | RNVC: 2
5801352-1860-00: RNCC: 5 | RNVC: 2
5801352-1860-00: RNCC: 5 | RNVC: 9

17 Jul 1980

5340-12-176-0953
Rod End Clevis

121760953
PAN4556-1L: RNCC: 3 | RNVC: 2

8 Nov 1978

5340-12-359-1686
Flush Lock

123591686
21101-134: RNCC: 3 | RNVC: 2

8 Jan 2003

5340-12-361-3348
Double Angle Bracket

123613348
51192020158: RNCC: 3 | RNVC: 2
51.19202-0158: RNCC: 5 | RNVC: 2

18 Sep 2003

5340-12-367-6419
Nonmetallic Bumper

123676419
893412131B: RNCC: 3 | RNVC: 2

17 Sep 2005

5340-12-320-7330
Mounting Bracket

123207330
54.0062.989.00: RNCC: 3 | RNVC: 2

12 Feb 1990

5340-12-316-5197
Angle Bracket

123165197
4900278-103120.00: RNCC: 2 | RNVC: 2
4900278-103120.00: RNCC: 3 | RNVC: 2

23 Jan 1989

5340-12-364-6585
Multiple Angle Bracket

123646585
54.0084.165.01: RNCC: 3 | RNVC: 2

19 Oct 2004

5340-12-307-2829
Lock-Release Lever

123072829
4900238-5820: RNCC: 2 | RNVC: 2

30 May 1986

5340-12-340-7754
Angle Bracket

123407754
365-160-006: RNCC: 2 | RNVC: 2
365-160-006: RNCC: 3 | RNVC: 2

11 Jun 1996

5340-12-702-0101
Retaining Band

127020101
VG95211-ML-127020101: RNCC: 2 | RNVC: 2
195 OST1 11027-73: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-315-6636
Metal Runner

123156636
512214-0220.000: RNCC: 3 | RNVC: 2
512214-0220: RNCC: 5 | RNVC: 2

18 Nov 1988

5340-12-147-2017
Turnbuckle

121472017
DIN1478-SPAEM16-ST: RNCC: 2 | RNVC: 2
SP-DIN1478-M16-AE/AE-ROH: RNCC: 3 | RNVC: 2
5400016S: RNCC: 5 | RNVC: 2
SP-DIN1478-M16-AE-ROH: RNCC: 5 | RNVC: 2
BM16DIN1478: RNCC: 5 | RNVC: 2
SPAEM16DIN1478: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-175-4324
Strap Fastener Loop

121754324
6626-10-02: RNCC: 3 | RNVC: 2

19 Sep 1978

5340-12-354-1928
Rod End Clevis

123541928
VG95211-ML-123541928: RNCC: 2 | RNVC: 2
A21-0042-001: RNCC: 3 | RNVC: 2

19 Jun 2001

5340-12-371-4788
Mounting Bracket

123714788
23303-142000.20: RNCC: 2 | RNVC: 2
23303-142000.20: RNCC: 3 | RNVC: 2
8406766: RNCC: 5 | RNVC: 2

4 Apr 2007

5340-12-333-2570
Nonmetallic Bumper

123332570
160-27075-14: RNCC: 3 | RNVC: 2
15160-27075.14: RNCC: 5 | RNVC: 2
160-27075-14: RNCC: 5 | RNVC: 9

15 Nov 1993

5340-12-188-5150
Nonmetallic Bumper

121885150
023355: RNCC: 3 | RNVC: 2
837-3355IM.NR50: RNCC: 3 | RNVC: 2
3355 IM: RNCC: 5 | RNVC: 2
3355IM: RNCC: 5 | RNVC: 2

15 Jul 1981

5340-12-363-2690
Angle Bracket

123632690
160-31061-08: RNCC: 3 | RNVC: 2

19 May 2004

5340-12-370-6166
Mechanical Stop

123706166
V6520-03013-102: RNCC: 2 | RNVC: 2
V6520-03013-102: RNCC: 3 | RNVC: 2

30 Nov 2006

5340-12-342-1406
Retaining Strap

123421406
135M19034: RNCC: 3 | RNVC: 2
135M19034E1: RNCC: 5 | RNVC: 2

18 Dec 1996

5340-12-332-9985
Retaining Strap

123329985
66.3567.510.06-A001: RNCC: 3 | RNVC: 2

20 Oct 1993

5340-12-393-5069
Double Angle Bracket

123935069
4085452640: RNCC: 3 | RNVC: 2

19 Sep 2013

5340-12-026-9924

5340-12-393-3666
Permanent Magnet

123933666
152036490: RNCC: 3 | RNVC: 2
152036490: RNCC: 3 | RNVC: 2

11 Sep 2013

5340-12-394-6363
Bumper

123946363
01142348: RNCC: 3 | RNVC: 2

20 Dec 2013

5340-12-196-6867
Extension Drawer Slide Section

121966867
52.2031.554.00: RNCC: 3 | RNVC: 2

2 Aug 1983

5340-12-370-1606
Dirt And Liquid Deflector

123701606
1121-45036: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-12-360-8059
Bow Handle

123608059
352764: RNCC: 3 | RNVC: 2

14 Jul 2003

5340-12-336-2641
Access Cover

123362641
4620 303 217: RNCC: 3 | RNVC: 2
4620303217: RNCC: 5 | RNVC: 9

4 Nov 1994

5340-12-302-2570
Double Angle Bracket

123022570
6204901240: RNCC: 3 | RNVC: 2

12 Dec 1984

5340-12-386-7096
Dust And Moisture Seal Protective Cap-Plug

123867096
T7516: RNCC: 3 | RNVC: 2
0729369: RNCC: 5 | RNVC: 2

26 Sep 2011

5340-12-372-4046
Spacing Threaded Standoff

123724046
1000287-208000.02: RNCC: 2 | RNVC: 2
1000287-208000.02: RNCC: 3 | RNVC: 2

13 Jul 2007

5340-12-173-8538
Loop Clamp

121738538
PAN4231CCCD5620: RNCC: 3 | RNVC: 2

17 May 1978

5340-12-368-9278
Mounting Bracket

123689278
0067228: RNCC: 3 | RNVC: 2

8 May 2006

5340-12-379-8467
Dust And Moisture Seal Protective Cap

123798467
06510294: RNCC: 3 | RNVC: 2
CV168964: RNCC: 5 | RNVC: 2
06510294: RNCC: 5 | RNVC: 2

8 Sep 2009

5340-12-316-4708
Mounting Bracket

123164708
54.0026.887.00: RNCC: 3 | RNVC: 2
54002688700: RNCC: 5 | RNVC: 2

19 Jan 1989

5340-12-175-1850
Angle Bracket

121751850
03416165: RNCC: 3 | RNVC: 2
3416165EF5042-72: RNCC: 5 | RNVC: 2

30 Aug 1978

5340-12-328-9733
Permanent Magnet

123289733
01320-03B: RNCC: 3 | RNVC: 2

4 Jul 1992

5340-12-361-6706
Access Cover

123616706
S533M6037101: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-12-091-4885

5340-12-308-5714
Flush Lock

123085714
580B031: RNCC: 3 | RNVC: 2
4008.8001.2: RNCC: 5 | RNVC: 2
113.827.503H: RNCC: 5 | RNVC: 2
113827503H: RNCC: 5 | RNVC: 2
1.058.017: RNCC: 5 | RNVC: 9

24 Oct 1986

5340-12-317-6797
Retaining Strap

123176797
1000173-380000.007.0: RNCC: 2 | RNVC: 2
1000173-380000.007.0: RNCC: 3 | RNVC: 2

28 Apr 1989

5340-12-196-6598
Permanent Magnet

121966598
8568-4: RNCC: 3 | RNVC: 2

28 Jul 1983

5340-12-337-9408
Mounting Bracket

123379408
G-111474: RNCC: 3 | RNVC: 2

4 May 1995

5340-12-365-7113
Spring Tension Clip

123657113
912002006001: RNCC: 3 | RNVC: 2
N12002-6 DBL8451.11: RNCC: 5 | RNVC: 2

26 Jan 2005

5340-12-380-2914
Butt Hinge Leaf

123802914
18054-WDS-D 111-12: RNCC: 3 | RNVC: 2

15 Oct 2009

5340-12-333-6672
Lock-Release Lever

123336672
GN100-22-M8-25-SW: RNCC: 3 | RNVC: 2
2441.254: RNCC: 3 | RNVC: 2
RBN942-G22XM8X25 SCHWARZ: RNCC: 3 | RNVC: 2
5L.3783.001.30: RNCC: 5 | RNVC: 2

20 Jan 1994

5340-12-306-3004
Nonmetallic Bumper

123063004
C42105-A24-C130: RNCC: 3 | RNVC: 2

17 Feb 1986

5340-12-701-6632
Mounting Plate

127016632
VG95211-ML-127016632: RNCC: 2 | RNVC: 2
5.12.7210.1460.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-139-8506
Helical Compression Spring Seat

121398506
22410411624: RNCC: 3 | RNVC: 2
0026128: RNCC: 5 | RNVC: 2
11340026128: RNCC: 5 | RNVC: 2
4798-097: RNCC: 5 | RNVC: 2
4798097: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-343-6939
Mechanic Equipment Hardware Kit

123436939
2.352.300.9: RNCC: 3 | RNVC: 2
2-352-300-9: RNCC: 5 | RNVC: 2

16 Jul 1997

5340-12-356-5640
Mortise Lock

123565640
M22-WS-MS11: RNCC: 3 | RNVC: 2
RS-KMS11-A2: RNCC: 5 | RNVC: 2

12 Mar 2002

5340-12-339-1622
Retaining Band

123391622
50001448-4: RNCC: 3 | RNVC: 2
50001448-4: RNCC: 5 | RNVC: 9

19 Oct 1995

5340-12-199-7543
Retaining Clip

121997543
1000131-4000.01: RNCC: 2 | RNVC: 2
1582852: RNCC: 3 | RNVC: 2
49.010.40000.01E: RNCC: 5 | RNVC: 9

26 May 1984

5340-12-371-3059
Clamping Catch

123713059
8390-0072: RNCC: 2 | RNVC: 2
8390-0072: RNCC: 3 | RNVC: 2

13 Mar 2007

5340-12-370-4197
Door Handle

123704197
492-181120.000: RNCC: 2 | RNVC: 2
492-181120.000: RNCC: 3 | RNVC: 2

6 Nov 2006

5340-12-386-3269
Angle Bracket

123863269
009-039.156-003: RNCC: 3 | RNVC: 2

24 Aug 2011

5340-12-702-6118
Loop Clamp

127026118
VG95211-ML-127026118: RNCC: 2 | RNVC: 2
5893A-19: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-349-1756
Dust And Moisture Seal Protective Plug

123491756
7414.0.07.00: RNCC: 3 | RNVC: 2

5 Oct 1999

5340-12-391-4239
Bumper

123914239
I010156: RNCC: 3 | RNVC: 2

12 Mar 2013

5340-12-372-3353
Spacing Threaded Standoff

123723353
S322I30A1221: RNCC: 3 | RNVC: 2

10 Jul 2007

5340-12-700-9183
Mounting Plate

127009183
VG95211-ML-127009183: RNCC: 2 | RNVC: 2
2.55.6100.0840.00: RNCC: 3 | RNVC: 2
155-6100-840: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-335-9810
Mounting Bracket

123359810
5077 322 023: RNCC: 3 | RNVC: 2
5077322023: RNCC: 5 | RNVC: 2
2-9802-0302-1: RNCC: 5 | RNVC: 9
2-9802-0302-1: RNCC: 5 | RNVC: 9

7 Oct 1994

5340-12-325-8006
Metal Runner

123258006
5801984-100000.002.0: RNCC: 2 | RNVC: 2
5801984-100000.002.0: RNCC: 3 | RNVC: 2
5801984-100000.002.0: RNCC: 5 | RNVC: 2
5801984-100000.002.0: RNCC: 5 | RNVC: 9

11 Jul 1991

5340-12-378-2968
Lock Key Set

123782968
4.873-023.0: RNCC: 3 | RNVC: 2

26 Mar 2009

5340-12-702-0171
Rod End Connector

127020171
VG95211-ML-127020171: RNCC: 2 | RNVC: 2
2.11.4207.0660.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-152-2977
Loop Clamp

121522977
5800400-0060-004: RNCC: 3 | RNVC: 2
6P358-60-4: RNCC: 5 | RNVC: 2
5800400-0060-004: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-703-3256
Mounting Bracket

127033256
VG95211-ML-127033256: RNCC: 2 | RNVC: 2
5.12.7904.8050.09: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-12-327-1492
Multiple Angle Bracket

123271492
85053-30.10.05.0: RNCC: 3 | RNVC: 2
85053-30.10.05.0: RNCC: 5 | RNVC: 9

6 Dec 1991

5340-12-702-4992
Mounting Bracket

127024992
VG95211-ML-127024992: RNCC: 2 | RNVC: 2
5.51.5811.0510.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-316-1861
Resilient Mount

123161861
2300223-220000.27.0: RNCC: 2 | RNVC: 2
845-2300223-220000.27.0: RNCC: 3 | RNVC: 2
2300223-220000.27.0: RNCC: 5 | RNVC: 2

29 Dec 1988

5340-12-703-0571
Retaining Strap

127030571
VG95211-ML-127030571: RNCC: 2 | RNVC: 2
1606A-62-T: RNCC: 3 | RNVC: 2
0500812770259: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-375-4623
Mounting Plate

123754623
58R153-26313-2: RNCC: 2 | RNVC: 2
58R153-26313-2: RNCC: 3 | RNVC: 2

4 Jun 2008

5340-12-330-7729
Nonmetallic Bumper

123307729
42-14-026.2: RNCC: 3 | RNVC: 2

5 Feb 1993

5340-12-701-3915
Loop Clamp

127013915
VG95211-ML-127013915: RNCC: 2 | RNVC: 2
5.12.5311.1000.33: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-186-0400
Hebel

121860400
23176-149025-00-0: RNCC: 2 | RNVC: 2
23176-149025-00-0: RNCC: 5 | RNVC: 2
23176-149025.00.0: RNCC: 5 | RNVC: 9

25 Nov 1980

5340-12-340-4095
Mounting Plate

123404095
6700019-201400.01: RNCC: 2 | RNVC: 2
6700019-201400.01: RNCC: 3 | RNVC: 2

10 Apr 1996

5340-12-702-9393
Pawl Fastener

127029393
VG95211-ML-127029393: RNCC: 2 | RNVC: 2
AEK-14: RNCC: 3 | RNVC: 2
0500891999399: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-360-7058
Nut And Bolt Locking Plate

123607058
5800150073: RNCC: 3 | RNVC: 2

1 Jul 2003

5340-12-194-3898
Catch Strike

121943898
291827527A: RNCC: 3 | RNVC: 2

28 Oct 1982

5340-12-304-6988
Plug Button

123046988
42488964: RNCC: 3 | RNVC: 2
3B55232: RNCC: 5 | RNVC: 2
0014311287: RNCC: 5 | RNVC: 2
B55232: RNCC: 5 | RNVC: 2

13 Aug 1985

5340-12-302-5057
Double Angle Bracket

123025057
F1003.02.06.01.06: RNCC: 3 | RNVC: 2
F1003.02.06.01.06: RNCC: 5 | RNVC: 9

9 Jan 1985

5340-12-315-6075
Nonmetallic Bumper

123156075
0700-0000-029: RNCC: 3 | RNVC: 2
0700/0000-029: RNCC: 5 | RNVC: 2
700-0000.029/34: RNCC: 5 | RNVC: 2

11 Nov 1988

5340-12-313-9093
Loop Clamp

123139093
LBG2 10/10UL: RNCC: 3 | RNVC: 2
LBG2 10UL: RNCC: 5 | RNVC: 2
LBG2/10-UL: RNCC: 5 | RNVC: 2
LBG2 10/10UL: RNCC: 5 | RNVC: 2

19 May 1988

5340-12-303-5835
Double Angle Bracket

123035835
P-616781-005: RNCC: 3 | RNVC: 2
P616781-005: RNCC: 5 | RNVC: 2

10 Apr 1985

5340-12-189-6744
Hand Crank

121896744
VG85086-B-200X17-AM: RNCC: 2 | RNVC: 2
VG85086-B-200X17-AM: RNCC: 3 | RNVC: 2
VG85086-B-200X17-AM: RNCC: 3 | RNVC: 2
VG85086-B-200X17-AM: RNCC: 3 | RNVC: 9
31001-0145-150: RNCC: 5 | RNVC: 2
9-45146-02-07: RNCC: 5 | RNVC: 2
B200X17VG85086RG5: RNCC: 5 | RNVC: 2
B200X17VG85086RG5: RNCC: 5 | RNVC: 9
B200X17VG85086-2.1096: RNCC: 5 | RNVC: 9
B200X17VG85086-RG5: RNCC: 5 | RNVC: 9

12 Oct 1981

5340-12-172-2946
Headless Straight Rod

121722946
2360-013100.00.0: RNCC: 2 | RNVC: 2
2360-013100.00.0: RNCC: 3 | RNVC: 2
2360-013100-00-0: RNCC: 5 | RNVC: 2
2360-013100.00.0: RNCC: 5 | RNVC: 2
2360-013100-00-0: RNCC: 5 | RNVC: 9
2360-013100.00.0: RNCC: 5 | RNVC: 9

10 Jan 1978

5340-12-356-6263
Manual Control Handle

123566263
W87-300-3800-01: RNCC: 3 | RNVC: 2

18 Mar 2002

5340-12-354-8270
Hand Crank

123548270
1000276-00 0 00100: RNCC: 2 | RNVC: 2
1000276-00 0 00100: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-309-3269
Extension Drawer Slide

123093269
TS1-192,5: RNCC: 3 | RNVC: 2

15 Jan 1987

5340-12-195-5414
Resilient Mount

121955414
251407183: RNCC: 3 | RNVC: 9

9 Mar 1983

5340-12-359-4711
Mounting Bracket

123594711
3271310035: RNCC: 3 | RNVC: 2

7 Feb 2003

5340-12-338-2396
Angle Bracket

123382396
0459301: RNCC: 3 | RNVC: 2

9 Jun 1995

5340-12-379-4262
Dust And Moisture Seal Protective Cap

123794262
000,579,1212: RNCC: 3 | RNVC: 2

22 Jul 2009

5340-12-370-5169
Electronic Equipment Hardware Kit

123705169
7803203800AA: RNCC: 3 | RNVC: 2

16 Nov 2006

5340-12-378-8246
Clamping Catch

123788246
10298454: RNCC: 2 | RNVC: 2
1429L02-2X1AH: RNCC: 3 | RNVC: 2
10298454: RNCC: 5 | RNVC: 2

15 May 2009

5340-12-135-4910

5340-12-352-5375
Angle Bracket

123525375
J92228866-401: RNCC: 3 | RNVC: 2

27 Nov 2000

5340-12-300-8878
Dust And Moisture Seal Protective Plug

123008878
272.305927: RNCC: 3 | RNVC: 2
272-305927: RNCC: 5 | RNVC: 2
272.305927: RNCC: 5 | RNVC: 9

7 Sep 1984

5340-12-339-2900
Access Cover

123392900
305300-01: RNCC: 3 | RNVC: 2
1100060: RNCC: 5 | RNVC: 2

6 Nov 1995

5340-12-386-4877
Mounting Bracket

123864877
009-221.449-006: RNCC: 3 | RNVC: 2

6 Sep 2011

5340-12-385-4185
Mounting Bracket

123854185
RI75-1G: RNCC: 3 | RNVC: 2

31 May 2011

5340-12-303-9474
Sliding Stay

123039474
3385000045: RNCC: 3 | RNVC: 2

23 May 1985

5340-12-393-7442
Handle Grip

123937442
16943: RNCC: 3 | RNVC: 2

8 Oct 2013

5340-12-177-8040
Mounting Bracket

121778040
81255405066: RNCC: 3 | RNVC: 2

21 Feb 1979

5340-12-349-6601
Access Cover

123496601
8666.1318: RNCC: 3 | RNVC: 2

15 Dec 1999

5340-12-357-8283
Mending Plate

123578283
2300042-255164.002: RNCC: 2 | RNVC: 2
9940266: RNCC: 3 | RNVC: 2
2300042-255164.002: RNCC: 5 | RNVC: 2

30 Jul 2002

5340-12-326-5206
Elastic Strap

123265206
490121: RNCC: 3 | RNVC: 2

30 Sep 1991

5340-12-387-8478
Loop Clamp

123878478
7093757: RNCC: 3 | RNVC: 2

2 Feb 2012

5340-12-389-1385
Expansion Shield

123891385
050407: RNCC: 3 | RNVC: 2

30 May 2012

5340-12-300-8483
Mending Plate

123008483
4254264540: RNCC: 3 | RNVC: 2

4 Sep 1984

5340-12-383-0627
Loop Clamp

123830627
EN4113S09WR: RNCC: 2 | RNVC: 2

9 Sep 2010

5340-12-393-3035
Lock-Release Lever

123933035
03196-15712030: RNCC: 3 | RNVC: 2

5 Sep 2013

5340-12-192-8437
Nonmetallic Bumper

121928437
ZBD61631: RNCC: 3 | RNVC: 2
015.6839: RNCC: 5 | RNVC: 2
0156839: RNCC: 5 | RNVC: 2

27 May 1982

5340-12-393-5103
Permanent Magnet

123935103
7137609: RNCC: 3 | RNVC: 2

19 Sep 2013

5340-12-310-5319
Access Cover

123105319
53.0428.000.12: RNCC: 3 | RNVC: 2

29 May 1987

5340-12-373-2424
Swivel Caster

123732424
LH-PO 150K-ST: RNCC: 3 | RNVC: 2

12 Oct 2007

5340-12-308-8695
Retaining Strap

123088695
490.4856.02: RNCC: 3 | RNVC: 2
490485602: RNCC: 5 | RNVC: 2

25 Nov 1986

5340-12-363-0537
Lock Bolt

123630537
2300042-992130.004: RNCC: 2 | RNVC: 2
2300042-992130.004: RNCC: 3 | RNVC: 2

29 Apr 2004

5340-12-358-9744
Retaining Strap

123589744
105-895287.03: RNCC: 3 | RNVC: 2

4 Dec 2002

5340-12-312-3478
Retaining Strap

123123478
65.7105.520.02-A001: RNCC: 3 | RNVC: 2

18 Dec 1987

5340-12-305-1951
Angle Bracket

123051951
5801763-010000.003: RNCC: 2 | RNVC: 2
5801763-010000.003: RNCC: 3 | RNVC: 2
5801763-010000.003: RNCC: 5 | RNVC: 9

4 Oct 1985

5340-12-304-9679
Double Angle Bracket

123049679
0214 9137: RNCC: 3 | RNVC: 2
02149137KZ0148-01: RNCC: 5 | RNVC: 2
214-9137: RNCC: 5 | RNVC: 9

12 Sep 1985

5340-12-381-0697
Dust And Moisture Seal Protective Plug

123810697
GN991-D42: RNCC: 3 | RNVC: 2

7 Jan 2010

5340-12-316-6381
Angle Bracket

123166381
51114020013: RNCC: 3 | RNVC: 2
51114020013: RNCC: 3 | RNVC: 2
51.11402-0013: RNCC: 5 | RNVC: 2
51.11402-0013: RNCC: 5 | RNVC: 2

30 Jan 1989

5340-12-322-1873
Extension Drawer Slide

123221873
13 9000 291: RNCC: 3 | RNVC: 2
MR720-60CM LANG: RNCC: 5 | RNVC: 2

31 Jul 1990

5340-12-172-9407
Angle Bracket

121729407
81664402100: RNCC: 3 | RNVC: 2
81.66440-2100: RNCC: 5 | RNVC: 2
00291132001: RNCC: 5 | RNVC: 2

6 Mar 1978

5340-12-701-9037
Retaining Bail

127019037
VG95211-ML-127019037: RNCC: 2 | RNVC: 2
N1129-10: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-361-3357
Angle Bracket

123613357
51974850053: RNCC: 3 | RNVC: 2
51.97485-0053: RNCC: 5 | RNVC: 2

18 Sep 2003

5340-12-361-7866
Mounting Plate

123617866
J92228652-003: RNCC: 3 | RNVC: 2

18 Nov 2003

5340-12-312-9896
Loop Clamp

123129896
HP-10N: RNCC: 3 | RNVC: 2
DZ015.8990: RNCC: 5 | RNVC: 2
DZ0158990: RNCC: 5 | RNVC: 2
HP-10N: RNCC: 5 | RNVC: 9

24 Feb 1988

5340-12-307-9403
Mending Plate

123079403
5801434-511000.03: RNCC: 2 | RNVC: 2
7800541003: RNCC: 3 | RNVC: 2
78005 41003: RNCC: 5 | RNVC: 9

13 Aug 1986

5340-12-308-3476
Retaining Strap

123083476
3.418.9.977.007.4: RNCC: 3 | RNVC: 2
3.418.9.977.007.4: RNCC: 5 | RNVC: 9

1 Oct 1986

5340-12-378-3866
Angle Bracket

123783866
B80096265: RNCC: 3 | RNVC: 2

1 Apr 2009

5340-12-316-2478
Rim Lock

123162478
6000047: RNCC: 3 | RNVC: 2

4 Jan 1989

5340-12-374-3357
Door Button

123743357
2007601: RNCC: 3 | RNVC: 2

8 Feb 2008

5340-12-385-3476
Helical Compression Spring Retainer

123853476
194-773: RNCC: 3 | RNVC: 2

25 May 2011

5340-12-300-3137
Double Angle Bracket

123003137
3098100014: RNCC: 3 | RNVC: 2

24 Jul 1984

5340-12-197-0631
Resilient Mount

121970631
251407077: RNCC: 3 | RNVC: 9

14 Sep 1983

5340-12-319-5277
Mounting Bracket

123195277
504334: RNCC: 3 | RNVC: 2

10 Oct 1989

5340-12-318-6116
Angle Bracket

123186116
0240 9304: RNCC: 3 | RNVC: 2
02409304: RNCC: 5 | RNVC: 2
2409304KZ0147-44: RNCC: 5 | RNVC: 2

1 Aug 1989

5340-12-324-2589
Mounting Bracket

123242589
571790015: RNCC: 3 | RNVC: 9

31 Jan 1991

5340-12-358-7867
Webbing Strap

123587867
3827921896: RNCC: 3 | RNVC: 2

14 Nov 2002

5340-12-322-3448
Retaining Strap

123223448
DIN3016-1-F1-70X15-W5-CR: RNCC: 2 | RNVC: 2
RSGU2.70/15-W5: RNCC: 3 | RNVC: 2
DIN3016-F1-70X15-W5: RNCC: 3 | RNVC: 2
DIN3016-F1-70X15-W5: RNCC: 5 | RNVC: 9

13 Aug 1990

5340-12-333-6697
Swivel Caster

123336697
LK-SPO 100 P-ST: RNCC: 3 | RNVC: 2
LK-SPO100P-ST: RNCC: 5 | RNVC: 2

20 Jan 1994

5340-12-333-8702
Mounting Bracket

123338702
405-7-26-1: RNCC: 3 | RNVC: 2
405-7.26.1: RNCC: 5 | RNVC: 2

18 Feb 1994

5340-12-322-8798
Angle Bracket

123228798
704-123115-000-0: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-12-164-8940
Loop Clamp

121648940
F25TAN15802-1-4544-9: RNCC: 3 | RNVC: 2
F25TAN15802N: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-191-1598
Hand Crank

121911598
H1-72148143-2: RNCC: 3 | RNVC: 2
Z4178-02A01007: RNCC: 5 | RNVC: 9
H1-72148143-2: RNCC: 5 | RNVC: 9
H1-72148143-2: RNCC: 5 | RNVC: 9

14 Jan 1982

5340-12-349-7915
Metal Grille

123497915
U60.100000.04-00: RNCC: 3 | RNVC: 2

10 Jan 2000

5340-12-340-9244
Webbing Strap

123409244
704-125022-000-0: RNCC: 3 | RNVC: 2

4 Jul 1996

5340-12-378-4283
Mounting Bracket

123784283
2300461-184330.000.0: RNCC: 2 | RNVC: 2
2300461-184330.000.0: RNCC: 3 | RNVC: 2

3 Apr 2009

5340-12-366-2966
Loop Clamp

123662966
105845: RNCC: 3 | RNVC: 2

6 Apr 2005

5340-12-348-6778
Double Angle Bracket

123486778
2300387-612050.002: RNCC: 2 | RNVC: 2
9909107: RNCC: 3 | RNVC: 2
2300387-612050.002: RNCC: 5 | RNVC: 9
9909107: RNCC: 5 | RNVC: 9

4 Aug 1999

5340-12-161-3983
Compression Cup

121613983
24X16X8N53100P88GRAD: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-040-8202

5340-12-185-3078
Angle Bracket

121853078
NO PRIMARY REF 12-185-3078: RNCC: 3 | RNVC: 2
1-6899-12-4-7043: RNCC: 5 | RNVC: 9
12-4-7043: RNCC: 5 | RNVC: 9

25 Sep 1980

5340-12-389-2744
Elastic Strap

123892744
710-331: RNCC: 3 | RNVC: 2

15 Jun 2012

5340-12-337-0167
Handwheel

123370167
DIN950-A3-160X16-AL: RNCC: 2 | RNVC: 2
A3-160X16DIN950-AL: RNCC: 5 | RNVC: 2

11 Jan 1995

5340-12-313-0150
Double Angle Bracket

123130150
P-086147-007: RNCC: 3 | RNVC: 2
P086147-007: RNCC: 5 | RNVC: 2

25 Feb 1988

5340-12-383-6466
Webbing Strap

123836466
SMJ 415-001-101-102: RNCC: 3 | RNVC: 2
SMJ415-001-101-102: RNCC: 5 | RNVC: 2

18 Nov 2010

5340-12-301-0047
Angle Bracket

123010047
P-296895-014: RNCC: 3 | RNVC: 2
P296895-014: RNCC: 5 | RNVC: 2

15 Sep 1984

5340-12-336-4865
Mounting Bracket

123364865
5.668-001.0: RNCC: 3 | RNVC: 2
5.668-001: RNCC: 5 | RNVC: 9

17 Nov 1994

Load More Results