What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Cremone Bolt?

A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is an Exit Bolt?

An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

Hardware, Commercial - Germany (DE)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Germany (DE) - NCB is 12

Page 102 of 178

NSN Format for Hardware, Commercial
Codified by Germany

53	40	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Germany (DE)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 117 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 244 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 412 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 10 Items
Holder,Spring 89 Items
What is a Compression Cup? 227 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 481 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 41 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 17 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 1075 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 325 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 144 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 19 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 3635 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 17 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Rigid Caster? 219 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 263 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 35 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 10 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 19 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 28 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Cremone Bolt? 70 Items: A Cremone Bolt (BOLT,CREMONE) is a bolt with two rods extending in opposite directions, which slide in guides. The rods are thrown by means of a handle or knob located between the rods.
What is a Flush Bolt? 63 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Hinged Hasp? 13 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Cane Bolt? 44 Items: A Cane Bolt (BOLT,CANE) is a bolt with the end of the sliding bar bent at a right angle to form a handle. The other end of the bar is either pointed or blunt. The bar is mounted on the bottom of doors and the like by means of two or more guides and is usually installed in a vertical position. Excludes BOLT (2), SURFACE.
What is a Rim Latch? 29 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 20 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 42 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 154 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 239 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 362 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 131 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 38 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 17 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 19 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 26 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 147 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 334 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 11 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Butt Hinge Leaf? 890 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 107 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 13 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 19 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 231 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 3928 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 20 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Bridge Clamp? 254 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 293 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 15 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 24 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 19 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 380 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 2098 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 1653 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 333 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 504 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Suction Cup? 14 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Blank Panel? 105 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 368 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 18 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 355 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 45 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 330 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 61 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 7328 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 88 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 43 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 257 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 145 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 5339 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 348 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 220 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Friction Catch Stud Receptacle? 40 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 88 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
What is a Dust And Moisture Seal Boot? 179 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 189 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 203 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Split Tubular Clip? 37 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 163 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Sash Pole? 11 Items: A Sash Pole (POLE,SASH) is a long, slender item with a hook on one end, specifically designed for adjusting out-of-reach windows and transoms.
What is a Spring Loaded Cylinder Fastener? 309 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 557 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flare Lock Fastener? 59 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 152 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 20 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 64 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 409 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 27 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 807 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 14 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 41 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 146 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 2223 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 206 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 132 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 1771 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 1440 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 211 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 119 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Cushioning Pad? 134 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 30 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 421 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 91 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 16 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Hand Carrying Strap Assembly? 24 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 839 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1123 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 174 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 312 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 829 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 19 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 152 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 12 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Clamping Catch? 687 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 248 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 74 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 117 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 51 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 3881 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 72 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 58 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 13 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 18 Items
What is an Antipilferage Seal? 56 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 620 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 21 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Protection Bellows? 210 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 38 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap-Plug Set? 10 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 188 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 79 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 8180 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 128 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 53 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 363 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 209 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 11 Items
What is a Beam Gripping Clamp? 10 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 3278 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 39 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 16 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 513 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Plain Standoff? 31 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 639 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 456 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 43 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is an Antipilferage Seal Locking Wire? 29 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 10 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is an Arched Cushion? 16 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 39 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Pipe Hanger? 117 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 400 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 176 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 40 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 59 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 27 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 217 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 31 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 17 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 14 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 17 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Sliding Block? 20 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 46 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 163 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 712 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Door Handle Unit? 10 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 72 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Shimmy Damper? 267 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 89 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 69 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
Holder,Roller 25 Items
What is a Key Blank? 43 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Resilient Mount Plate? 10 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 321 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 17 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 504 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 11 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 178 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 11 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Locking Stay? 16 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 102 of 178

5340-12-384-9679
Mounting Bracket

123849679
F1.1289-37-05-00.00-06: RNCC: 3 | RNVC: 2

14 Apr 2011

5340-12-300-0010
Angle Bracket

123000010
C249-A34-B19: RNCC: 3 | RNVC: 2

21 Jun 1984

5340-12-344-4349
Access Cover

123444349
2500255-190000.034.0: RNCC: 2 | RNVC: 2
2500255-190000.034.0: RNCC: 3 | RNVC: 2

28 Oct 1997

5340-12-141-3848
Butt Hinge

121413848
NO PRIMARY REF 12-141-3848: RNCC: 3 | RNVC: 2
6011043455: RNCC: 5 | RNVC: 9
6011 043455: RNCC: 5 | RNVC: 9
5-707-24: RNCC: 5 | RNVC: 9
5-0707-0024: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-188-0258
Sealing Plug Assembly

121880258
P-896662-403: RNCC: 3 | RNVC: 2
P896662-403: RNCC: 5 | RNVC: 2

27 May 1981

5340-12-317-8022
Mounting Bracket

123178022
P-616815-441: RNCC: 3 | RNVC: 2
P616815-441: RNCC: 5 | RNVC: 2

16 May 1989

5340-12-702-4099
Mounting Plate

127024099
VG95211-ML-127024099: RNCC: 2 | RNVC: 2
5.12.6110.0940.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-173-7915
Spring Tension Clip

121737915
P-296652-033: RNCC: 3 | RNVC: 2
P296652-033: RNCC: 5 | RNVC: 2

16 May 1978

5340-12-341-0278
Access Cover

123410278
2500262-191200.000.0: RNCC: 2 | RNVC: 2
2500262-191200.000.0: RNCC: 3 | RNVC: 2

18 Jul 1996

5340-12-373-4945
Loop Clamp

123734945
SFH-12-0: RNCC: 3 | RNVC: 2

8 Nov 2007

5340-12-323-8234
Angle Bracket

123238234
169512: RNCC: 3 | RNVC: 9

20 Dec 1990

5340-12-349-3744
Nonmetallic Bumper

123493744
601 361: RNCC: 3 | RNVC: 2

5 Nov 1999

5340-12-356-3699
Mounting Bracket

123563699
2339-070020A03B: RNCC: 3 | RNVC: 2

19 Feb 2002

5340-12-340-1367
Mounting Bracket

123401367
726 22471 AAAA: RNCC: 3 | RNVC: 2
726 22471 AAAA-HDQB: RNCC: 5 | RNVC: 2

5 Mar 1996

5340-12-141-3303
Strap Hinge

121413303
2509-108.315: RNCC: 2 | RNVC: 2
4654: RNCC: 3 | RNVC: 2
2509-108.315: RNCC: 3 | RNVC: 2
2509-108-315: RNCC: 5 | RNVC: 9
2509-108.315: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-344-5633
Loop Clamp

123445633
51974400111: RNCC: 3 | RNVC: 2
564 8006 114: RNCC: 5 | RNVC: 2
GBSP 114/20-W2: RNCC: 5 | RNVC: 2
51.97440-0111: RNCC: 5 | RNVC: 2

7 Nov 1997

5340-12-355-1333
Access Cover

123551333
1097443: RNCC: 3 | RNVC: 2
06380P001001: RNCC: 5 | RNVC: 2

11 Oct 2001

5340-12-310-4520
Handwheel

123104520
81.97005.0039: RNCC: 3 | RNVC: 2
81970050039: RNCC: 5 | RNVC: 2

22 May 1987

5340-12-198-9413
Resilient Mount

121989413
0224 6095: RNCC: 3 | RNVC: 2
2246095: RNCC: 5 | RNVC: 2
2246095KZ0141-46: RNCC: 5 | RNVC: 2

14 Mar 1984

5340-12-701-9941
Loop Clamp

127019941
VG95211-ML-127019941: RNCC: 2 | RNVC: 2
155N464-536: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-184-5204
Detent Plunger

121845204
5801339-052-001: RNCC: 3 | RNVC: 2
5801339-052.001: RNCC: 5 | RNVC: 2

29 Jul 1980

5340-12-316-7587
Electrical-Mechanical Equipment Post

123167587
54.0026.049.00: RNCC: 3 | RNVC: 2

9 Feb 1989

5340-12-366-4938
Mechanical Stop

123664938
272.335.041: RNCC: 3 | RNVC: 2

28 Apr 2005

5340-12-302-7159
Clamp Bolt Assembly

123027159
PAN6620: RNCC: 3 | RNVC: 2

24 Jan 1985

5340-12-313-2588
Angle Bracket

123132588
81254452026: RNCC: 3 | RNVC: 2
81.25445.2026: RNCC: 5 | RNVC: 2

16 Mar 1988

5340-12-170-2049
Nut And Bolt Locking Plate

121702049
3052 308 004: RNCC: 3 | RNVC: 2
3052308004: RNCC: 5 | RNVC: 9

29 Jun 1977

5340-12-376-8996
Loop Clamp

123768996
R900202635: RNCC: 3 | RNVC: 2
5325R90023051: RNCC: 5 | RNVC: 9

18 Nov 2008

5340-12-165-0414
Snap Hook

121650414
3210015: RNCC: 3 | RNVC: 2
50248: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-164-1038

5340-12-367-1130
Angle Bracket

123671130
ENAW-5754H22/32: RNCC: 3 | RNVC: 2

11 Jul 2005

5340-12-188-7733
Angle Bracket

121887733
5800261-800.01: RNCC: 2 | RNVC: 2
5800261-800.01: RNCC: 3 | RNVC: 2
5800261-800.01: RNCC: 3 | RNVC: 2
5800261-800-01: RNCC: 5 | RNVC: 2
5800261-800.01: RNCC: 5 | RNVC: 9
5800261-800.01: RNCC: 5 | RNVC: 9

29 Jul 1981

5340-12-165-7918
Retaining Strap

121657918
DIN72573-1X20-ST-VERZINKT: RNCC: 2 | RNVC: 2
BSL1X20/72573VPE: RNCC: 3 | RNVC: 2
BSL20DIN72573: RNCC: 3 | RNVC: 2
DIN72573-1X20-ST-VERZINKT: RNCC: 3 | RNVC: 2
1X20DIN72573STVERZINKT: RNCC: 5 | RNVC: 2
15120000120: RNCC: 5 | RNVC: 2
5120000120: RNCC: 5 | RNVC: 2
5128980120: RNCC: 5 | RNVC: 2
BSL20DIN72573: RNCC: 5 | RNVC: 2
1X20DIN72573-ST-VERZINKT: RNCC: 5 | RNVC: 2

26 Jun 1976

5340-12-700-6559
Retaining Strap

127006559
VG95211-ML-127006559: RNCC: 2 | RNVC: 2
5.12.5850.1520.00: RNCC: 3 | RNVC: 2
0501400978090: RNCC: 5 | RNVC: 2

2 Oct 1992

5340-12-323-9987
Mounting Plate

123239987
702-232100-902-0: RNCC: 3 | RNVC: 2

15 Jan 1991

5340-12-310-4614
Electrical-Mechanical Equipment Post

123104614
VG95148B5,5XM3X20-2.0402.30-E2A: RNCC: 2 | RNVC: 2
5.03.203: RNCC: 3 | RNVC: 2
VG95148B5,5XM3X20-2.0402.30-E2A: RNCC: 3 | RNVC: 2

22 May 1987

5340-12-304-4824
Double Angle Bracket

123044824
2300106-260200.09: RNCC: 2 | RNVC: 2
2300106-260200.09: RNCC: 3 | RNVC: 2
2300106-260200.09: RNCC: 5 | RNVC: 9
2300106-260200.09: RNCC: 5 | RNVC: 9

23 Jul 1985

5340-12-314-5212
Access Cover

123145212
272.317 724: RNCC: 2 | RNVC: 2
272.317.724: RNCC: 3 | RNVC: 2
272.317 724: RNCC: 5 | RNVC: 9

15 Jul 1988

5340-12-384-8980
Retaining Strap

123848980
11887: RNCC: 3 | RNVC: 2

7 Apr 2011

5340-12-300-6704
Double Angle Bracket

123006704
4355830514: RNCC: 3 | RNVC: 2

22 Aug 1984

5340-12-342-8012
Mounting Bracket

123428012
5014-049: RNCC: 3 | RNVC: 2

2 Apr 1997

5340-12-301-8880
Angle Bracket

123018880
20-5220-093: RNCC: 3 | RNVC: 2

15 Nov 1984

5340-12-365-5898
Double Angle Bracket

123655898
J32320148-401: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-12-378-2335
Angle Bracket

123782335
5400053-372510.02: RNCC: 2 | RNVC: 2
5400053-372510.02: RNCC: 3 | RNVC: 2

20 Mar 2009

5340-12-171-1226
Butt Hinge

121711226
81972016023: RNCC: 3 | RNVC: 2
81.97201-6023: RNCC: 5 | RNVC: 2
9273: RNCC: 5 | RNVC: 2

9 Sep 1977

5340-12-145-9640
Webbing Strap

121459640
5800268-122: RNCC: 2 | RNVC: 2
5800268-122: RNCC: 3 | RNVC: 2
5800268-122: RNCC: 5 | RNVC: 2
5800268-122: RNCC: 5 | RNVC: 9
5800268-122: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-161-5741
Access Cover

121615741
100332-11000.09: RNCC: 2 | RNVC: 2
100332-11000-09: RNCC: 5 | RNVC: 2
100332-11000.09: RNCC: 5 | RNVC: 2
100332-11000-09: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-364-6588
Angle Bracket

123646588
54.0084.172.09: RNCC: 3 | RNVC: 2

19 Oct 2004

5340-12-387-0612
Antipilferage Seal

123870612
JG739W: RNCC: 3 | RNVC: 2

2 Nov 2011

5340-12-354-8278
Manual Control Lever

123548278
03.001.13.18.0: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-12-156-2742
Plain Solid Disk

121562742
139215-22210-02: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-304-1779
Loop Clamp

123041779
WN 414 25-180-ST: RNCC: 3 | RNVC: 2
WN 414 25-180-ST: RNCC: 5 | RNVC: 9
WN41425-180-ST: RNCC: 5 | RNVC: 9

20 Jun 1985

5340-12-172-7538
Pipe Bracket

121727538
23290-182000.034: RNCC: 2 | RNVC: 2
23290-182000-034: RNCC: 5 | RNVC: 2
23290-182000-034: RNCC: 5 | RNVC: 9

20 Feb 1978

5340-12-391-7197
Mounting Bracket

123917197
3524010240: RNCC: 3 | RNVC: 2

28 Mar 2013

5340-12-196-8846
Ball Socket Seat

121968846
DIN71805-B10-A2P: RNCC: 2 | RNVC: 2
DIN71805-B10-A2P: RNCC: 3 | RNVC: 2
06361204202: RNCC: 5 | RNVC: 2
071805010204: RNCC: 5 | RNVC: 2
B10DIN71805DBL8451-22: RNCC: 5 | RNVC: 2
B10DIN71805A2P: RNCC: 5 | RNVC: 2
071805-010101: RNCC: 5 | RNVC: 9
071805-010204: RNCC: 5 | RNVC: 9

29 Aug 1983

5340-12-174-7902
Spring Tension Clip

121747902
009-039.161-003: RNCC: 3 | RNVC: 2
12791-130100-003: RNCC: 5 | RNVC: 2
12791-130100-003: RNCC: 5 | RNVC: 9
12791-130100.003: RNCC: 5 | RNVC: 9
009-039-161-003: RNCC: 5 | RNVC: 9

3 Aug 1978

5340-12-382-3861
Access Cover

123823861
588.90-323000-003: RNCC: 3 | RNVC: 2

14 Jun 2010

5340-12-311-5876
Mending Plate

123115876
6600133-231100.001: RNCC: 2 | RNVC: 2
001 585 500-116: RNCC: 3 | RNVC: 2

23 Sep 1987

5340-12-331-0640
Nonmetallic Bumper

123310640
DIN95364-D50X21-M10X28-NR70ST: RNCC: 2 | RNVC: 2
551005-M10X28.NR70.ST: RNCC: 5 | RNVC: 2
3018061SHORE70: RNCC: 5 | RNVC: 2
3018061/11MN70: RNCC: 5 | RNVC: 2
02.45.150: RNCC: 5 | RNVC: 2
VG95364-D50X21-M10X28-NR70ST: RNCC: 5 | RNVC: 9

17 Mar 1993

5340-12-308-9920
Angle Bracket

123089920
P-245251-763: RNCC: 3 | RNVC: 2
P245251-763: RNCC: 5 | RNVC: 2

4 Dec 1986

5340-12-312-9963
Mending Plate

123129963
401808-00: RNCC: 3 | RNVC: 2
9XB401808-00: RNCC: 3 | RNVC: 2

24 Feb 1988

5340-12-365-3730
Mounting Bracket

123653730
2300348-060083.001.0: RNCC: 2 | RNVC: 2
2300348-060083.001.0: RNCC: 3 | RNVC: 2

23 Dec 2004

5340-12-702-3716
Rod End Connector

127023716
VG95211-ML-127023716: RNCC: 2 | RNVC: 2
5.12.4802.0040.03: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-362-3208
Webbing Strap

123623208
4075963: RNCC: 3 | RNVC: 2
4075-963: RNCC: 5 | RNVC: 2

5 Feb 2004

5340-12-194-4671
Pipe Bracket

121944671
P-616780-401: RNCC: 3 | RNVC: 2
P616780-401: RNCC: 5 | RNVC: 2

8 Nov 1982

5340-12-344-4350
Mending Plate

123444350
2500255-190000.065.0: RNCC: 2 | RNVC: 2
2500255-190000.065.0: RNCC: 3 | RNVC: 2

28 Oct 1997

5340-12-128-9605
Retaining Strap

121289605
VG95933ER-15-MS-BK: RNCC: 2 | RNVC: 2
1/2D15MMN325MS: RNCC: 3 | RNVC: 2
1-2D15MMN325MS: RNCC: 5 | RNVC: 2
378116: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-176-2479
Rod End Clevis

121762479
4A93566-1: RNCC: 3 | RNVC: 2
1692-411: RNCC: 5 | RNVC: 2
1692411: RNCC: 5 | RNVC: 2
8436461: RNCC: 5 | RNVC: 2

23 Nov 1978

5340-12-345-5990
Turnbuckle

123455990
20L01-1-1AA: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-12-158-5896
Door Button

121585896
2360-261100.08.0: RNCC: 2 | RNVC: 2
2360-261100.08.0: RNCC: 3 | RNVC: 2
2360-261100.08.0: RNCC: 5 | RNVC: 2
2360-261100-08-0: RNCC: 5 | RNVC: 2
2360-261100-08-0: RNCC: 5 | RNVC: 2
2360-261100.08.0: RNCC: 5 | RNVC: 2
2360-261100-08-0: RNCC: 5 | RNVC: 9
2360-261100.08.0: RNCC: 5 | RNVC: 9
2360-261100.08.0: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-198-6689
Butt Hinge Leaf

121986689
2572-190005.01.0: RNCC: 2 | RNVC: 2
2572-190005.01.0: RNCC: 3 | RNVC: 2
2572-190005-01-0: RNCC: 5 | RNVC: 2
2572-190005-01-0: RNCC: 5 | RNVC: 9
2572-190005.01.0: RNCC: 5 | RNVC: 9

17 Feb 1984

5340-12-701-6133
Mounting Plate

127016133
VG95211-ML-127016133: RNCC: 2 | RNVC: 2
5.12.7010.1500.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-386-1883
Angle Bracket

123861883
9999261-301710.010.0: RNCC: 3 | RNVC: 2

15 Aug 2011

5340-12-331-1902
Mounting Bracket

123311902
161000310: RNCC: 3 | RNVC: 2
16-100-0310: RNCC: 5 | RNVC: 2
7101-75-99.10: RNCC: 5 | RNVC: 9

31 Mar 1993

5340-12-322-7396
Lock-Release Lever

123227396
2300123-004001.000.0: RNCC: 2 | RNVC: 2
2300123-004001.000.0: RNCC: 3 | RNVC: 2
2300123-004001.000.0: RNCC: 3 | RNVC: 2
790-00.30.001-17D: RNCC: 5 | RNVC: 2

18 Sep 1990

5340-12-190-7225
Mounting Bracket

121907225
NO PRIMARY REF 12-190-7225: RNCC: 3 | RNVC: 2
7631 137288: RNCC: 5 | RNVC: 9
7631137288: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-184-7813
Retaining Strap

121847813
F01-213161-07-0: RNCC: 3 | RNVC: 2

16 Aug 1980

5340-12-300-9318
Electrical-Mechanical Equipment Post

123009318
VG95148C7XM4X10-ST: RNCC: 2 | RNVC: 2
5.14.101: RNCC: 3 | RNVC: 2
VG95148C7XM4X10-ST: RNCC: 3 | RNVC: 2
18H212: RNCC: 3 | RNVC: 2
703.001642: RNCC: 5 | RNVC: 2
18H212B3C: RNCC: 5 | RNVC: 2

13 Sep 1984

5340-12-370-7951
Spring Loaded Cylinder Fastener

123707951
GN612-10-M16X1,5-BK: RNCC: 3 | RNVC: 2

21 Dec 2006

5340-12-328-9634
Clamping Catch

123289634
V951L03-1-1BP: RNCC: 3 | RNVC: 2
3622621310: RNCC: 5 | RNVC: 2
91383803: RNCC: 5 | RNVC: 2

3 Jul 1992

5340-12-314-6973
Resilient Mount

123146973
60150001-B: RNCC: 3 | RNVC: 2
E1N3341-02: RNCC: 3 | RNVC: 2
331952203: RNCC: 5 | RNVC: 2
VG95365-D2-NR-AMST: RNCC: 5 | RNVC: 9

30 Jul 1988

5340-12-374-3219
Retaining Strap

123743219
5324441: RNCC: 3 | RNVC: 2

7 Feb 2008

5340-12-199-3297
Retaining Strap

121993297
3529950748: RNCC: 3 | RNVC: 2

12 Apr 1984

5340-12-311-6239
Angle Bracket

123116239
5801658-7300.03: RNCC: 3 | RNVC: 2
5801658-7300.03: RNCC: 5 | RNVC: 9

29 Sep 1987

5340-12-162-7682
Webbing Strap

121627682
3898524743: RNCC: 3 | RNVC: 2
ST5800426-0903-000: RNCC: 5 | RNVC: 2
5800426-0903-000: RNCC: 5 | RNVC: 2
38985 24743: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-322-0099
Mounting Plate

123220099
23290-171014.000: RNCC: 2 | RNVC: 2
9868967: RNCC: 3 | RNVC: 2
9868967: RNCC: 5 | RNVC: 9
23290-171014.000: RNCC: 5 | RNVC: 9

17 Jul 1990

5340-12-313-8679
Angle Bracket

123138679
3604292940: RNCC: 3 | RNVC: 2
360 429 29 40: RNCC: 5 | RNVC: 2

14 May 1988

5340-12-385-4793
Section Block Clamp

123854793
00001-107A: RNCC: 3 | RNVC: 2

8 Jun 2011

5340-12-384-4331
Mounting Bracket

123844331
678.07.030.000: RNCC: 3 | RNVC: 2
678.07.030.000: RNCC: 5 | RNVC: 2

23 Feb 2011

5340-12-343-3365
Mounting Plate

123433365
998079-1: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-12-316-2766
Escutcheon Plate

123162766
2765OZNSN10-0: RNCC: 3 | RNVC: 2
27650ZNSN10-0: RNCC: 5 | RNVC: 2
91612519: RNCC: 5 | RNVC: 2

5 Jan 1989

5340-12-314-5231
Mounting Plate

123145231
CF 445 773 A: RNCC: 2 | RNVC: 2
CF 445 773 A: RNCC: 3 | RNVC: 2
CF 445 773 A: RNCC: 5 | RNVC: 2

15 Jul 1988

5340-12-326-2897
Double Angle Bracket

123262897
CF 832 355 A: RNCC: 2 | RNVC: 2
CF 832 355 A: RNCC: 3 | RNVC: 2
CF 832 355 A: RNCC: 5 | RNVC: 2

27 Aug 1991

5340-12-357-6470
Loop Clamp

123576470
0019952165: RNCC: 3 | RNVC: 2

9 Jul 2002

5340-12-362-8746
Dust And Moisture Seal Boot

123628746
111101: RNCC: 3 | RNVC: 2

8 Apr 2004

5340-12-147-5609
Nonmetallic Bumper

121475609
8382230165: RNCC: 2 | RNVC: 2
8382230165: RNCC: 3 | RNVC: 2
711046: RNCC: 5 | RNVC: 2
600238: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-389-4515
Handwheel

123894515
D03951: RNCC: 3 | RNVC: 2

9 Jul 2012

5340-12-199-4141
Spring Tension Clip

121994141
3094310043: RNCC: 3 | RNVC: 2

19 Apr 1984

5340-12-198-4144
Nonmetallic Bumper

121984144
27 0322 350: RNCC: 2 | RNVC: 2
9837776: RNCC: 3 | RNVC: 2
9837776: RNCC: 5 | RNVC: 9
270322350: RNCC: 5 | RNVC: 9
27 0322 350: RNCC: 5 | RNVC: 9

26 Jan 1984

5340-12-357-3457
Section Block Clamp

123573457
8809951568: RNCC: 3 | RNVC: 2

11 Jun 2002

5340-12-328-5553
Snap Hook

123285553
5002-80: RNCC: 3 | RNVC: 9

3 Jun 1992

5340-12-122-2377

5340-12-043-4209

5340-12-320-2195
Angle Bracket

123202195
5802102-202100.00: RNCC: 2 | RNVC: 2
5802102-202100.00: RNCC: 5 | RNVC: 9

19 Dec 1989

5340-12-172-6123
Electrical-Mechanical Equipment Post

121726123
210-03-01-012: RNCC: 3 | RNVC: 2

31 Jan 1978

5340-12-702-1657
Mounting Plate

127021657
VG95211-ML-127021657: RNCC: 2 | RNVC: 2
30.7100.1240: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-387-3974
Hand Crank

123873974
20-7410-272: RNCC: 3 | RNVC: 2

9 Dec 2011

5340-12-336-7317
Pawl Fastener

123367317
4900347-201110.00: RNCC: 2 | RNVC: 2
4900347-201110.00: RNCC: 3 | RNVC: 2
4900347-201110.00: RNCC: 3 | RNVC: 2

16 Dec 1994

5340-12-363-9092
Section Block Clamp

123639092
J29120458-001: RNCC: 3 | RNVC: 2

4 Aug 2004

5340-12-391-4579
Padlock

123914579
65/30HB60: RNCC: 3 | RNVC: 2

13 Mar 2013

5340-12-703-0574
Retaining Strap

127030574
VG95211-ML-127030574: RNCC: 2 | RNVC: 2
1666S50-36N: RNCC: 3 | RNVC: 2
0500812917919: RNCC: 5 | RNVC: 2

17 Nov 1997

5340-12-351-7543
Catch Strike

123517543
631788: RNCC: 3 | RNVC: 2

18 Aug 2000

5340-12-359-9231
Strap Hinge Leaf

123599231
A2528651620000: RNCC: 3 | RNVC: 2

20 Mar 2003

5340-12-337-1212
Mounting Bracket

123371212
2782-193010.001.0: RNCC: 2 | RNVC: 2
2782-193010.001.0: RNCC: 3 | RNVC: 2

20 Jan 1995

5340-12-703-3140
Retaining Strap

127033140
VG95211-ML-127033140: RNCC: 2 | RNVC: 2
5.12.5312.8090.22: RNCC: 3 | RNVC: 2

3 Apr 2000

5340-12-370-5802
Mechanical Stop

123705802
V6520-03011-159: RNCC: 2 | RNVC: 2
V6520-03011-159: RNCC: 3 | RNVC: 2

24 Nov 2006

5340-12-178-2206
Mending Plate

121782206
2500001-350140-05-0: RNCC: 3 | RNVC: 2
2500001-350140-05-0: RNCC: 5 | RNVC: 9
2500001-350140.05.0: RNCC: 5 | RNVC: 9

9 Apr 1979

5340-12-149-9028
Resilient Mount

121499028
DIN95369-A4-5-CR-ST: RNCC: 2 | RNVC: 2
151007-M12-CR.ST-70: RNCC: 5 | RNVC: 2
60-201-070: RNCC: 5 | RNVC: 2
C2090G: RNCC: 5 | RNVC: 2
VG95369-A4-5-CR-ST: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-183-0755
Resilient Mount

121830755
6300-1: RNCC: 3 | RNVC: 2
0287 1623: RNCC: 5 | RNVC: 2
2871623: RNCC: 5 | RNVC: 2
2871623ED8971-79: RNCC: 5 | RNVC: 2
6300-1: RNCC: 5 | RNVC: 9

18 Mar 1980

5340-12-386-2448
Access Cover

123862448
2500261-183630.000.0: RNCC: 2 | RNVC: 2
2500261-183630.000.0: RNCC: 3 | RNVC: 2

18 Aug 2011

5340-12-322-3954
Angle Bracket

123223954
7068-81000-001-2: RNCC: 3 | RNVC: 2

17 Aug 1990

5340-12-335-8519
Lock-Release Lever

123358519
073-291300-000-0: RNCC: 2 | RNVC: 2
073-291300-000-0: RNCC: 3 | RNVC: 2

23 Sep 1994

5340-12-702-4548
Pawl Fastener

127024548
VG95211-ML-127024548: RNCC: 2 | RNVC: 2
5.51.0602.1754.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-701-1689
Butt Hinge

127011689
VG95211-ML-127011689: RNCC: 2 | RNVC: 2
5.12.0237.1720.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-701-5757
Mounting Bracket

127015757
VG95211-ML-127015757: RNCC: 2 | RNVC: 2
5.12.6402.0610.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-175-8201
Door Button

121758201
6-020-009-00: RNCC: 3 | RNVC: 2
0006311155: RNCC: 5 | RNVC: 2
6020-009-00: RNCC: 5 | RNVC: 2
A 000 631 11 55: RNCC: 5 | RNVC: 9

23 Oct 1978

5340-12-313-0841
Electrical-Mechanical Equipment Post

123130841
P-896357-037: RNCC: 3 | RNVC: 2
P896357-037: RNCC: 5 | RNVC: 2

3 Mar 1988

5340-12-377-7193
Bow Handle

123777193
GN565.1-26-116-SW: RNCC: 3 | RNVC: 2

5 Feb 2009

5340-12-312-6734
Electrical-Mechanical Equipment Post

123126734
VG95148B5XM3X30-2.0380.30-E2A: RNCC: 2 | RNVC: 2
VG95148B5XM3X30-2.0380.30-E2A: RNCC: 3 | RNVC: 2
ENMET 2-30: RNCC: 3 | RNVC: 2

26 Jan 1988

5340-12-308-5696
Mending Plate

123085696
A-296655-421: RNCC: 3 | RNVC: 2
A296655-421: RNCC: 5 | RNVC: 2

24 Oct 1986

5340-12-386-1411
Access Cover

123861411
2500262-190236.000.0: RNCC: 2 | RNVC: 2
2500262-190236.000.0: RNCC: 3 | RNVC: 2

11 Aug 2011

5340-12-385-5489
Mounting Bracket

123855489
SK1331-657211.000.0: RNCC: 3 | RNVC: 2

15 Jun 2011

5340-12-331-7457
Access Cover

123317457
2300232-063710.000.0: RNCC: 2 | RNVC: 2
2300232-063710.000.0: RNCC: 3 | RNVC: 2

16 Jun 1993

5340-12-319-9407
Rod End Clevis

123199407
2300232-202010.000.0: RNCC: 2 | RNVC: 2
2300232-202010.000.0: RNCC: 3 | RNVC: 2
9997001-202010.000.0: RNCC: 5 | RNVC: 2
2300232-202010.000.02: RNCC: 5 | RNVC: 9

20 Nov 1989

5340-12-364-3923
Verriegelun Buegel

123643923
5981-186000.003.0: RNCC: 3 | RNVC: 2

18 Sep 2004

5340-12-180-4122
Mounting Bracket

121804122
5801113-5-012: RNCC: 3 | RNVC: 2
5801113-5.012: RNCC: 5 | RNVC: 2

10 Sep 1979

5340-12-308-2046
Mending Plate

123082046
DIN3015-L-AP-L-2-W1: RNCC: 2 | RNVC: 2
SPV 2: RNCC: 3 | RNVC: 2
HRL2APV ST M BL: RNCC: 3 | RNVC: 2
APL-A2: RNCC: 3 | RNVC: 2
SPV 2: RNCC: 5 | RNVC: 2
261 575: RNCC: 5 | RNVC: 2
SPV2L: RNCC: 5 | RNVC: 2
APL-A2: RNCC: 5 | RNVC: 2
DIN3015-LAP2-W1-L: RNCC: 5 | RNVC: 2
SVP-2-L: RNCC: 5 | RNVC: 9

12 Sep 1986

5340-12-386-4833
Spring Holder

123864833
009-221.320-014: RNCC: 3 | RNVC: 2

5 Sep 2011

5340-12-368-6704
Escutcheon Plate

123686704
6272640057: RNCC: 3 | RNVC: 2
179-71.31.151-01D: RNCC: 5 | RNVC: 2

5 Apr 2006

5340-12-334-5100
Mounting Bracket

123345100
105-80352: RNCC: 3 | RNVC: 2

18 May 1994

5340-12-010-0893

5340-12-004-3831

5340-12-322-0017
Access Cover

123220017
52.1088.068.00: RNCC: 3 | RNVC: 2

17 Jul 1990

5340-12-332-2585
Plain Solid Disk

123322585
2410030033: RNCC: 3 | RNVC: 2

27 Jul 1993

5340-12-378-2701
Double Angle Bracket

123782701
41216785: RNCC: 3 | RNVC: 2

24 Mar 2009

5340-12-320-0724
Access Door

123200724
100013008: RNCC: 3 | RNVC: 2

5 Dec 1989

5340-12-318-6413
Mounting Bracket

123186413
2300137-260618.002: RNCC: 2 | RNVC: 2
9854401: RNCC: 3 | RNVC: 2
2300137-260618.002: RNCC: 5 | RNVC: 9
9854401: RNCC: 5 | RNVC: 9

2 Aug 1989

5340-12-385-1380
Helical Compression Spring Seat

123851380
460190721: RNCC: 3 | RNVC: 2

4 May 2011

5340-12-196-5995
Nonmetallic Bumper

121965995
107214: RNCC: 3 | RNVC: 2

21 Jul 1983

5340-12-333-2886
Webbing Strap

123332886
52.5000.815.05: RNCC: 2 | RNVC: 2
52.5000.815.05: RNCC: 3 | RNVC: 2

19 Nov 1993

5340-12-199-8010
Mending Plate

121998010
5801357-6062.01: RNCC: 2 | RNVC: 2
5801357-6062.01: RNCC: 3 | RNVC: 2

31 May 1984

5340-12-198-7518
Pad Eye

121987518
8372230441: RNCC: 3 | RNVC: 2

23 Feb 1984

5340-12-357-1736
Mechanical Stop

123571736
8812300047: RNCC: 2 | RNVC: 2
8812300047: RNCC: 3 | RNVC: 2

15 May 2002

5340-12-389-9113
Loop Clamp

123899113
2300002-091000.000.0: RNCC: 2 | RNVC: 2
2300002-091000.000.0: RNCC: 3 | RNVC: 2

12 Sep 2012

5340-12-701-6538
Pawl Fastener

127016538
VG95211-ML-127016538: RNCC: 2 | RNVC: 2
5.12.7207.1312.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-314-0385
Nonmetallic Bumper

123140385
C42298-A40-C8: RNCC: 3 | RNVC: 2

1 Jun 1988

5340-12-369-2369
Section Block Clamp

123692369
1404003-000.03: RNCC: 2 | RNVC: 2
1404003-000.03: RNCC: 3 | RNVC: 2

8 Jun 2006

5340-12-702-8058
Webbing Strap

127028058
50-40700010075: RNCC: 2 | RNVC: 2
1385722205001008: RNCC: 5 | RNVC: 2

21 Dec 1995

5340-12-381-3888
Strap Fastener Loop

123813888
75018: RNCC: 3 | RNVC: 2
283.002-043: RNCC: 5 | RNVC: 2

9 Feb 2010

5340-12-164-7971
Butt Hinge Leaf

121647971
160-73419-01: RNCC: 3 | RNVC: 2
160-73419-01: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-187-0815
Resilient Mount

121870815
2-01-016241-01: RNCC: 3 | RNVC: 9
0009883610: RNCC: 5 | RNVC: 2

5 Mar 1981

5340-12-349-1133
Mounting Plate

123491133
0006431-002-ZG: RNCC: 3 | RNVC: 2
0006431-002-ZG: RNCC: 3 | RNVC: 2
0006431-002-ZG: RNCC: 5 | RNVC: 9

27 Sep 1999

5340-12-145-3827

5340-12-392-0082
Runner

123920082
109048-25205: RNCC: 3 | RNVC: 2

25 Apr 2013

5340-12-359-9436
Dust And Moisture Seal Protective Plug

123599436
04127000: RNCC: 3 | RNVC: 2
05821271: RNCC: 5 | RNVC: 2

21 Mar 2003

5340-12-181-2275
Double Angle Bracket

121812275
CF432570: RNCC: 3 | RNVC: 2
CF 432 570: RNCC: 5 | RNVC: 2
CF432570: RNCC: 5 | RNVC: 2
CF 432 570: RNCC: 5 | RNVC: 2
CF432570: RNCC: 5 | RNVC: 2
CF 432 570: RNCC: 5 | RNVC: 2

5 Nov 1979

5340-12-358-3526
Mounting Bracket

123583526
85252455019: RNCC: 3 | RNVC: 2
85.25245.5019: RNCC: 5 | RNVC: 2
85.25245.5003: RNCC: 5 | RNVC: 9

14 Oct 2002

5340-12-331-5121
Pad Eye

123315121
U100-3412-200: RNCC: 2 | RNVC: 2
U100-3412-200: RNCC: 3 | RNVC: 2

12 May 1993

5340-12-338-6910
Webbing Strap

123386910
2300013-3215.00: RNCC: 2 | RNVC: 2
7900621-00131.00: RNCC: 3 | RNVC: 2
9910874: RNCC: 5 | RNVC: 2
9910874: RNCC: 5 | RNVC: 9

16 Aug 1995

5340-12-355-1728
Turnbuckle

123551728
DIN1480-M6: RNCC: 2 | RNVC: 2

18 Oct 2001

5340-12-324-4153
Angle Bracket

123244153
160.31.0010: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-12-168-3137
Retaining Band

121683137
6490018: RNCC: 3 | RNVC: 2
972301-426297: RNCC: 5 | RNVC: 2

7 Mar 1977

5340-12-702-5353
Mounting Bracket

127025353
VG95211-ML-127025353: RNCC: 2 | RNVC: 2
5.51.7204.0440.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-318-2406
Folding Stay

123182406
3080-0108-03-00: RNCC: 3 | RNVC: 2
308-0108-03-00: RNCC: 5 | RNVC: 2

22 Jun 1989

5340-12-701-4800
Retaining Band

127014800
VG95211-ML-127014800: RNCC: 2 | RNVC: 2
5.12.5811.1460.15: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-142-4268

5340-12-384-6977
Webbing Strap

123846977
BW-410-40: RNCC: 3 | RNVC: 2

21 Mar 2011

5340-12-356-8957
Loop Clamp

123568957
160-24943-20: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-12-184-3602
Dust And Moisture Seal Protective Plug

121843602
5801357-2410.03: RNCC: 2 | RNVC: 2
5801357-2410.03: RNCC: 3 | RNVC: 2
5801357-2410-03: RNCC: 5 | RNVC: 2
5801357-2410-03: RNCC: 5 | RNVC: 2
5801357-2410-03: RNCC: 5 | RNVC: 9

19 Jul 1980

5340-12-313-5555
Mounting Bracket

123135555
2300223-201000.11.0: RNCC: 2 | RNVC: 2
2300223-201000.11.0: RNCC: 3 | RNVC: 2

15 Apr 1988

5340-12-193-9259
Electrical-Mechanical Equipment Post

121939259
VG95148A12XM6X114,5-NRST: RNCC: 2 | RNVC: 2
VG95148A12XM6X114,5-NRST: RNCC: 3 | RNVC: 2
5546553: RNCC: 3 | RNVC: 2

14 Sep 1982

5340-12-191-5693
Hand Crank

121915693
VG85086-B-425X32-AM: RNCC: 2 | RNVC: 2
VG85086-B-425X32-AM: RNCC: 3 | RNVC: 2
VG85086-B-425X32-AM: RNCC: 3 | RNVC: 2
VG85086-B-425X32-AM: RNCC: 3 | RNVC: 9
B425X32VG85086-RG5: RNCC: 5 | RNVC: 9

11 Feb 1982

5340-12-383-3405
Lever Bracket

123833405
1692298: RNCC: 3 | RNVC: 2

7 Oct 2010

5340-12-370-1362
Mending Plate

123701362
300.048.035: RNCC: 2 | RNVC: 2
300.048.035: RNCC: 3 | RNVC: 2

25 Sep 2006

5340-12-313-1408
Retaining Strap

123131408
13059: RNCC: 3 | RNVC: 2
0004760636: RNCC: 5 | RNVC: 2

5 Mar 1988

5340-12-151-9035
Strap Fastener Loop

121519035
3200011: RNCC: 3 | RNVC: 2
870: RNCC: 3 | RNVC: 2
4130204: RNCC: 5 | RNVC: 2
5547989: RNCC: 5 | RNVC: 2
2730 5196 00: RNCC: 5 | RNVC: 2
0009880783: RNCC: 5 | RNVC: 2
320 0011: RNCC: 5 | RNVC: 2
33055: RNCC: 5 | RNVC: 2
0009880783: RNCC: 5 | RNVC: 2
A0009884783: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-322-2318
Clamping Catch

123222318
DIN3133-D105ZN12: RNCC: 2 | RNVC: 2

3 Aug 1990

5340-12-195-2002
Dust And Moisture Seal Protective Cap

121952002
025-0489-000: RNCC: 3 | RNVC: 2

25 Jan 1983

5340-12-383-7769
Angle Bracket

123837769
601241-202600.03: RNCC: 2 | RNVC: 2
601241-202600.03: RNCC: 3 | RNVC: 2

7 Dec 2010

5340-12-349-6473
Mounting Bracket

123496473
5803671-201240.00: RNCC: 2 | RNVC: 2
0106.21240.220: RNCC: 3 | RNVC: 2
5803671-201240.00: RNCC: 5 | RNVC: 2
5803671-201240.00: RNCC: 5 | RNVC: 2

14 Dec 1999

5340-12-353-6867
Multiple Angle Bracket

123536867
J92222364-401: RNCC: 3 | RNVC: 2

26 Apr 2001

5340-12-178-4364
Platte

121784364
944-43-50-02: RNCC: 3 | RNVC: 2

20 Apr 1979

5340-12-187-6985
Dust And Moisture Seal Protective Plug

121876985
110-310.43-035: RNCC: 3 | RNVC: 2
110E31043-35: RNCC: 5 | RNVC: 9

29 Apr 1981

5340-12-321-6726
Resilient Mount

123216726
2300232-060000.037.0: RNCC: 2 | RNVC: 2
2300232-060000.037.0: RNCC: 3 | RNVC: 2
2300232-060000.037.0: RNCC: 3 | RNVC: 2
2300232-060000.007.02: RNCC: 5 | RNVC: 9

15 Jun 1990

5340-12-362-1398
Retaining Band

123621398
11195209: RNCC: 3 | RNVC: 2
MBT20XH: RNCC: 5 | RNVC: 2
364-6508: RNCC: 5 | RNVC: 2

14 Jan 2004

5340-12-196-8672
Mending Plate

121968672
62.6637.100.05-A001: RNCC: 3 | RNVC: 2
555151: RNCC: 5 | RNVC: 2

29 Aug 1983

5340-12-327-4364
Helical Compression Spring Retainer

123274364
5158447: RNCC: 3 | RNVC: 2

22 Jan 1992

5340-12-332-3199
Retaining Band

123323199
TK5340-005-1: RNCC: 2 | RNVC: 2
SPANNBAND BW KS 1,5: RNCC: 3 | RNVC: 2
TK-BA35-5340-489: RNCC: 5 | RNVC: 2
TK-E59C-5340-030-1: RNCC: 5 | RNVC: 2

28 Jul 1993

5340-12-308-1618
Tee Hinge

123081618
113-04275F: RNCC: 3 | RNVC: 2

9 Sep 1986

5340-12-393-0900
Mechanical Stop

123930900
106-1-4050: RNCC: 3 | RNVC: 2

6 Aug 2013

5340-12-303-0476
Mending Plate

123030476
6600117-622000.01: RNCC: 2 | RNVC: 2
6600117-622000.01: RNCC: 5 | RNVC: 9

22 Feb 1985

5340-12-324-9035
Angle Bracket

123249035
5802031-3050: RNCC: 2 | RNVC: 2
7802071305: RNCC: 3 | RNVC: 2
5802031-3050: RNCC: 5 | RNVC: 2
78020 71305: RNCC: 5 | RNVC: 9

8 Apr 1991

5340-12-701-8753
Loop Clamp

127018753
VG95211-ML-127018753: RNCC: 2 | RNVC: 2
7.76.7600.1250.00: RNCC: 3 | RNVC: 2
76-7600-1250: RNCC: 5 | RNVC: 2

6 Feb 1995

5340-12-384-1541
Loop Clamp

123841541
DIN3016-1-A2-15-15X20-W1-2: RNCC: 2 | RNVC: 2

27 Jan 2011

5340-12-181-2290
Retaining Strap

121812290
21-1010: RNCC: 3 | RNVC: 2
21-1010: RNCC: 5 | RNVC: 9
5900046-1010: RNCC: 5 | RNVC: 9

5 Nov 1979

5340-12-321-6483
Access Cover

123216483
7068-13500-001-2: RNCC: 3 | RNVC: 2

12 Jun 1990

5340-12-389-7111
Top Handler Twist Lock Hardware Kit

123897111
7125144: RNCC: 3 | RNVC: 2

16 Aug 2012

5340-12-127-0406
Ball Socket Seat

121270406
3214620137: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-126-0603

5340-12-367-1353
Mounting Bracket

123671353
2016.1457: RNCC: 3 | RNVC: 2
2016.1457: RNCC: 5 | RNVC: 2

12 Jul 2005

5340-12-390-0299
Mending Plate

123900299
312637: RNCC: 3 | RNVC: 2

26 Sep 2012

5340-12-341-9770
Retaining Strap

123419770
0213 6648: RNCC: 3 | RNVC: 2
02136648ED0150-16: RNCC: 5 | RNVC: 2
F300 0T 017 8041: RNCC: 6 | RNVC: 9

22 Nov 1996

5340-12-334-3911
Mounting Bracket

123343911
1680301400: RNCC: 3 | RNVC: 2
16803014: RNCC: 5 | RNVC: 2

3 May 1994

5340-12-373-9375
Extension Drawer Slide

123739375
1562.002: RNCC: 3 | RNVC: 2

20 Dec 2007

5340-12-345-5984
Angle Bracket

123455984
03959000: RNCC: 3 | RNVC: 2
03959000.643: RNCC: 5 | RNVC: 2

2 Apr 1998

5340-12-367-4019
Manual Control Lever

123674019
943385963: RNCC: 3 | RNVC: 2

15 Aug 2005

5340-12-176-2573
Webbing Strap

121762573
183823687: RNCC: 3 | RNVC: 2

23 Nov 1978

5340-12-360-2157
Angle Bracket

123602157
110486: RNCC: 3 | RNVC: 2
3514330501: RNCC: 5 | RNVC: 2

17 Apr 2003

5340-12-317-3571
Angle Bracket

123173571
0240 9279: RNCC: 3 | RNVC: 2

31 Mar 1989

5340-12-346-4631
Angle Bracket

123464631
02483904: RNCC: 3 | RNVC: 2
02483904: RNCC: 5 | RNVC: 2
2483904: RNCC: 5 | RNVC: 2
2483904ED5022-71: RNCC: 5 | RNVC: 2
2483904: RNCC: 5 | RNVC: 2

28 Jul 1998

5340-12-325-1846
Catch Strike

123251846
407C-70MMX40MM: RNCC: 3 | RNVC: 2

14 May 1991

5340-12-041-9821

5340-12-351-3255
Flush Lock

123513255
2416Z RECHTS: RNCC: 3 | RNVC: 2
105808: RNCC: 5 | RNVC: 2

13 Jul 2000

5340-12-357-5028
Mounting Bracket

123575028
J92228158-403: RNCC: 3 | RNVC: 2

27 Jun 2002

5340-12-304-2173
Mending Plate

123042173
1300392-105000.004: RNCC: 2 | RNVC: 2
279.995620: RNCC: 3 | RNVC: 2
279.995620: RNCC: 5 | RNVC: 9
279.995620: RNCC: 5 | RNVC: 9

26 Jun 1985

5340-12-196-9264
Metal Runner

121969264
12743-410.006: RNCC: 2 | RNVC: 2
12743-410.006: RNCC: 3 | RNVC: 2
009-017.410-006: RNCC: 5 | RNVC: 2
12743-410.006: RNCC: 5 | RNVC: 9

31 Aug 1983

5340-12-344-9111
Kunst Gleitschiene

123449111
U15.151000.02-00: RNCC: 3 | RNVC: 2

12 Jan 1998

5340-12-307-3633
Mending Plate

123073633
1300062-220000.04: RNCC: 2 | RNVC: 2
7872173: RNCC: 3 | RNVC: 2
7872-173: RNCC: 5 | RNVC: 2

10 Jun 1986

5340-12-123-3237
Nonmetallic Bumper

121233237
845-E360692: RNCC: 3 | RNVC: 2
360692: RNCC: 3 | RNVC: 2
E360692: RNCC: 5 | RNVC: 2
0332 5206: RNCC: 5 | RNVC: 2
3325206: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-320-8140
Retaining Band

123208140
42038536: RNCC: 3 | RNVC: 2
42038536K5043-72: RNCC: 5 | RNVC: 2

19 Feb 1990

5340-12-322-3580
Double Angle Bracket

123223580
100013039: RNCC: 3 | RNVC: 2

15 Aug 1990

5340-12-365-9300
Mounting Bracket

123659300
9424603135: RNCC: 3 | RNVC: 2

18 Feb 2005

5340-12-197-0931
Nonmetallic Bumper

121970931
4358687297: RNCC: 3 | RNVC: 2

19 Sep 1983

5340-12-345-1208
Webbing Strap

123451208
R53949: RNCC: 3 | RNVC: 2
10031436: RNCC: 3 | RNVC: 2
4075-951: RNCC: 5 | RNVC: 2
R53949: RNCC: 5 | RNVC: 9

3 Feb 1998

5340-12-183-0748
Access Cover

121830748
0287 5836: RNCC: 3 | RNVC: 2
2875836ED0693-78: RNCC: 5 | RNVC: 2
2875836: RNCC: 5 | RNVC: 2

18 Mar 1980

5340-12-329-8263
Lock-Release Lever

123298263
2300248-85216.00: RNCC: 2 | RNVC: 2
2300248-85216.00: RNCC: 3 | RNVC: 2
EBAF001: RNCC: 3 | RNVC: 2

2 Oct 1992

5340-12-317-1979
Double Angle Bracket

123171979
3225650014: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-12-319-3579
Electrical-Mechanical Equipment Post

123193579
18H210: RNCC: 3 | RNVC: 2

26 Sep 1989

5340-12-371-9646
Double Angle Bracket

123719646
SLT50-3-3922: RNCC: 3 | RNVC: 2
6090716: RNCC: 3 | RNVC: 2

4 Jun 2007

5340-12-703-2044
Mounting Plate

127032044
VG95211-ML-127032044: RNCC: 2 | RNVC: 2
5.12.5305.4801.98: RNCC: 3 | RNVC: 2

21 Oct 1998

5340-12-300-6968
Dust And Moisture Seal Protective Plug

123006968
3.3304-1100.1: RNCC: 3 | RNVC: 2
0009971186: RNCC: 5 | RNVC: 2
2 0067-180: RNCC: 5 | RNVC: 2

25 Aug 1984

5340-12-380-7740
Access Cover

123807740
8W131Q003-0000.01: RNCC: 3 | RNVC: 2

27 Nov 2009

5340-12-321-9397
Clamping Catch

123219397
V917L11-1-1AG: RNCC: 3 | RNVC: 2
5L.3741.009.12: RNCC: 5 | RNVC: 2

11 Jul 1990

5340-12-182-4241
Butt Hinge Leaf

121824241
A50X3X1072HAN16515-3-1354-6: RNCC: 3 | RNVC: 2

1 Feb 1980

5340-12-190-7234
Mounting Bracket

121907234
NO PRIMARY REF 12-190-7234: RNCC: 3 | RNVC: 2
7568 123633: RNCC: 5 | RNVC: 9
7568123633: RNCC: 5 | RNVC: 9

9 Dec 1981

5340-12-307-9497
Electrical-Mechanical Equipment Post

123079497
00584-10880-10-002: RNCC: 3 | RNVC: 2

13 Aug 1986

5340-12-308-7073
Catch Strike

123087073
09670009909: RNCC: 3 | RNVC: 2
MIND50-09670009909: RNCC: 5 | RNVC: 2

10 Nov 1986

5340-12-160-0563
Retaining Band

121600563
03402209: RNCC: 3 | RNVC: 2
151-005U: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-179-7039
Dust And Moisture Seal Protective Plug

121797039
K88445006: RNCC: 3 | RNVC: 2
81.61701-0027: RNCC: 5 | RNVC: 2
81617010027: RNCC: 5 | RNVC: 2

20 Jul 1979

5340-12-151-5006
Butt Hinge

121515006
DIN7955-XA40-ST-ZN: RNCC: 2 | RNVC: 2
XA40DIN7955VERZINKT: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-307-3674
Clamping Catch

123073674
6100129-90300: RNCC: 2 | RNVC: 2
3781333: RNCC: 3 | RNVC: 2
3781333KE8935-37: RNCC: 5 | RNVC: 2

10 Jun 1986

5340-12-379-8727
Dust And Moisture Seal Protective Cap

123798727
06510351: RNCC: 3 | RNVC: 2
CV168968: RNCC: 5 | RNVC: 2
06510351: RNCC: 5 | RNVC: 2

9 Sep 2009

5340-12-197-4833
Loop Clamp

121974833
219220-99: RNCC: 3 | RNVC: 2

26 Oct 1983

5340-12-091-7276

5340-12-145-5447

5340-12-390-8511
Access Cover

123908511
0035310581: RNCC: 3 | RNVC: 2
UKK3MSTB-5/08L: RNCC: 5 | RNVC: 9

19 Dec 2012

5340-12-362-3094
Angle Bracket

123623094
69401-002: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-12-188-4028
Mending Plate

121884028
5802206-045000-001: RNCC: 2 | RNVC: 2
535.5226: RNCC: 3 | RNVC: 2
5355226: RNCC: 5 | RNVC: 2

7 Jul 1981

5340-12-195-2614
Spacing Threaded Standoff

121952614
PAN5170-08-070: RNCC: 3 | RNVC: 2

31 Jan 1983

5340-12-301-8435
Flush Lock

123018435
30.012.500: RNCC: 3 | RNVC: 2
0008900089: RNCC: 5 | RNVC: 2

13 Nov 1984

5340-12-359-1684
Extension Drawer Slide

123591684
20230-869: RNCC: 3 | RNVC: 2

8 Jan 2003

5340-12-348-6771
Mounting Bracket

123486771
2300387-700611.000: RNCC: 2 | RNVC: 2
9906303: RNCC: 3 | RNVC: 2
2300387-700611.000: RNCC: 5 | RNVC: 9
9906303: RNCC: 5 | RNVC: 9

4 Aug 1999

5340-12-325-4021
Handle Grip

123254021
0005451081: RNCC: 3 | RNVC: 2

3 Jun 1991

5340-12-392-4107
Mechanical Stop

123924107
25569: RNCC: 3 | RNVC: 2

5 Jun 2013

5340-12-308-0683
Detent Plunger

123080683
2602-16.02: RNCC: 3 | RNVC: 2

28 Aug 1986

5340-12-334-4906
Angle Bracket

123344906
C230ZZ11002-000: RNCC: 3 | RNVC: 2

16 May 1994

5340-12-326-4340
Loop Clamp

123264340
DIN3015-L-KP-4-G-28-PA6: RNCC: 2 | RNVC: 2
RANG-428: RNCC: 3 | RNVC: 2
428PAH: RNCC: 3 | RNVC: 2
HRGL4KP28PA: RNCC: 3 | RNVC: 2
DIN3015-LKP4G-28PA: RNCC: 5 | RNVC: 2
DIN3015-L-KP-4-G-28-PA: RNCC: 5 | RNVC: 2
HRL4KP28PA-GLATT: RNCC: 5 | RNVC: 2
RANG-428: RNCC: 5 | RNVC: 2
VG95932KL4-28-PA: RNCC: 5 | RNVC: 9

16 Sep 1991

5340-12-325-6246
Mounting Plate

123256246
5801984-200300.004.0: RNCC: 2 | RNVC: 2
5801984-200300.004.0: RNCC: 3 | RNVC: 2

24 Jun 1991

5340-12-382-6160
Rigid Caster

123826160
26713: RNCC: 3 | RNVC: 2
700.51.1.501-035: RNCC: 5 | RNVC: 2

16 Jul 2010

5340-12-344-3752
Angle Bracket

123443752
A-296771-063: RNCC: 3 | RNVC: 2
A296771-063: RNCC: 5 | RNVC: 2

21 Oct 1997

5340-12-368-4898
Mounting Bracket

123684898
1030099-016100.000.0: RNCC: 2 | RNVC: 2
1030099-016100.000.0: RNCC: 3 | RNVC: 2

16 Mar 2006

5340-12-354-7690
Mounting Plate

123547690
P-876186-025: RNCC: 3 | RNVC: 2
P876186-025: RNCC: 5 | RNVC: 2

23 Aug 2001

5340-12-390-5392
Mounting Bracket

123905392
SK1171-171520.003.0: RNCC: 3 | RNVC: 2
7115795: RNCC: 5 | RNVC: 2

21 Nov 2012

5340-12-366-1365
Mounting Bracket

123661365
2500267-195800.000.0: RNCC: 3 | RNVC: 2

14 Mar 2005

5340-12-322-1871
Access Door

123221871
40 0176 833: RNCC: 2 | RNVC: 2
40 0176 833: RNCC: 3 | RNVC: 2
40 0176 833: RNCC: 5 | RNVC: 9

31 Jul 1990

5340-12-364-2058
Mounting Bracket

123642058
4256201614: RNCC: 3 | RNVC: 2

1 Sep 2004

5340-12-325-7925
Access Cover

123257925
1269 338 034: RNCC: 3 | RNVC: 2
1269338034: RNCC: 5 | RNVC: 2
91699432: RNCC: 5 | RNVC: 2
0003209950: RNCC: 5 | RNVC: 2
1269338034: RNCC: 5 | RNVC: 9

10 Jul 1991

5340-12-313-8768
Access Cover

123138768
3512 713 11463: RNCC: 3 | RNVC: 2

17 May 1988

5340-12-363-7976
Blank Panel

123637976
06510303: RNCC: 3 | RNVC: 2

24 Jul 2004

5340-12-185-1209
Mounting Bracket

121851209
2702040000: RNCC: 3 | RNVC: 2
27020 40000: RNCC: 5 | RNVC: 9

11 Sep 1980

5340-12-351-7542
Friction Catch Stud

123517542
631792: RNCC: 3 | RNVC: 2

18 Aug 2000

5340-12-315-8709
Resilient Mount

123158709
23111-2859.00: RNCC: 2 | RNVC: 2
96008701: RNCC: 3 | RNVC: 2
23111-2859.00: RNCC: 3 | RNVC: 2
1064640: RNCC: 5 | RNVC: 2
1064640: RNCC: 5 | RNVC: 9
23111-2859.00: RNCC: 5 | RNVC: 9
23111-2859.00: RNCC: 5 | RNVC: 9

3 Dec 1988

5340-12-314-2471
Double Angle Bracket

123142471
3874660540: RNCC: 3 | RNVC: 2
387 466 05 40: RNCC: 5 | RNVC: 2

21 Jun 1988

5340-12-323-8153
Mounting Bracket

123238153
100-00082-12.04: RNCC: 2 | RNVC: 2
100-00082-12.04: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-12-327-5557
Angle Bracket

123275557
4900377-200000.05: RNCC: 2 | RNVC: 2
4900377-200000.05: RNCC: 5 | RNVC: 9

3 Feb 1992

5340-12-122-3289
Nonmetallic Bumper

121223289
837-0008770265-NR60: RNCC: 3 | RNVC: 2
0008770265: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-391-5220
Retaining Strap

123915220
9140001002: RNCC: 3 | RNVC: 2

18 Mar 2013

5340-12-376-7150
Access Cover

123767150
S334M6004101: RNCC: 3 | RNVC: 2

30 Oct 2008

5340-12-130-2004

5340-12-193-3382
Spring Tension Clip

121933382
5801417-0120.011: RNCC: 3 | RNVC: 2
5801417-0120-011: RNCC: 5 | RNVC: 2

13 Jul 1982

5340-12-163-3172
Access Cover

121633172
1918-821006-012: RNCC: 2 | RNVC: 2
1918-821006-012: RNCC: 5 | RNVC: 2
1918-821006.012: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-379-9374
Mending Plate

123799374
1557920: RNCC: 3 | RNVC: 2

14 Sep 2009

5340-12-385-9314
Track Stop

123859314
S252M3899326: RNCC: 3 | RNVC: 2

22 Jul 2011

5340-12-366-3857
Swivel Caster

123663857
441A 14K160E ZPK: RNCC: 3 | RNVC: 2

19 Apr 2005

5340-12-323-3135
Plain Solid Disk

123233135
231600002: RNCC: 3 | RNVC: 2
91694111: RNCC: 5 | RNVC: 2

13 Nov 1990

5340-12-368-9298
Retaining Strap

123689298
1384100: RNCC: 3 | RNVC: 2

8 May 2006

5340-12-310-4043
Mending Plate

123104043
2300227-314000.001: RNCC: 2 | RNVC: 2
2300227-314000.001: RNCC: 3 | RNVC: 2

19 May 1987

5340-12-320-6589
Dust And Moisture Seal Protective Plug

123206589
36311458284: RNCC: 3 | RNVC: 2
1458284: RNCC: 5 | RNVC: 2

5 Feb 1990

5340-12-390-7045
Dust And Moisture Seal Protective Cap

123907045
0015332831: RNCC: 3 | RNVC: 2

5 Dec 2012

5340-12-010-8495

5340-12-130-0565

5340-12-196-0394
Dust And Moisture Seal Protective Cap

121960394
TK7003T283: RNCC: 3 | RNVC: 2
1392151-010184.283: RNCC: 5 | RNVC: 2
1392151-010184.283: RNCC: 5 | RNVC: 9
1392151-010184.283: RNCC: 5 | RNVC: 9
TK7003T283: RNCC: 5 | RNVC: 9

18 May 1983

5340-12-154-2869
Dust And Moisture Seal Protective Plug

121542869
2633: RNCC: 3 | RNVC: 2
P437: RNCC: 3 | RNVC: 2
P437SW: RNCC: 5 | RNVC: 2
552-0414: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-319-3480
Access Cover

123193480
9522006554: RNCC: 3 | RNVC: 2

25 Sep 1989

5340-12-320-0205
Dust And Moisture Seal Protective Cap

123200205
K48: RNCC: 3 | RNVC: 2

28 Nov 1989

5340-12-392-5912
Mounting Plate

123925912
M2557426623200: RNCC: 3 | RNVC: 2

20 Jun 2013

5340-12-356-1784
Door Button

123561784
2300279-9284.00: RNCC: 2 | RNVC: 2
2300279-9284.00: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-12-355-1125
Mounting Bracket

123551125
1116568: RNCC: 3 | RNVC: 2
529-760204.00.0: RNCC: 5 | RNVC: 2

9 Oct 2001

5340-12-342-4428
Compression Cup

123424428
5756-1: RNCC: 3 | RNVC: 2
5756-1: RNCC: 5 | RNVC: 2

12 Feb 1997

5340-12-346-7585
Double Angle Bracket

123467585
2300127-180000.004.0: RNCC: 2 | RNVC: 2
2300127-180000.004.0: RNCC: 3 | RNVC: 2

7 Sep 1998

5340-12-702-4290
Mounting Bracket

127024290
VG95211-ML-127024290: RNCC: 2 | RNVC: 2
5.12.8101.2871.98: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-702-5235
Mounting Bracket

127025235
VG95211-ML-127025235: RNCC: 2 | RNVC: 2
5.51.7010.0150.08: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-372-3373
Spring Loaded Cylinder Fastener

123723373
03096-01105: RNCC: 3 | RNVC: 2
NLM-03096-01105: RNCC: 5 | RNVC: 2

10 Jul 2007

5340-12-319-3825
Bridge Clamp

123193825
C117-A44-C4: RNCC: 2 | RNVC: 2
C117-A44-C4: RNCC: 3 | RNVC: 2

27 Sep 1989

5340-12-315-8474
Mending Plate

123158474
166-3130: RNCC: 3 | RNVC: 2
D 166-3130: RNCC: 5 | RNVC: 2
3-4152-909: RNCC: 5 | RNVC: 2
166-3130: RNCC: 5 | RNVC: 9
3-4152-909: RNCC: 5 | RNVC: 9
D 166-3130: RNCC: 5 | RNVC: 9

1 Dec 1988

5340-12-702-5257
Mounting Plate

127025257
VG95211-ML-127025257: RNCC: 2 | RNVC: 2
5.51.7010.0310.00: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-333-3247
Nonmetallic Bumper

123333247
00098428930: RNCC: 3 | RNVC: 9
328-18000.004: RNCC: 5 | RNVC: 9
9842893: RNCC: 5 | RNVC: 9

24 Nov 1993

5340-12-365-1384
Expansion Plug

123651384
000443022000: RNCC: 3 | RNVC: 2
DIN443-A22 DBL8400.00: RNCC: 5 | RNVC: 9

1 Dec 2004

5340-12-348-7753
Loop Clamp

123487753
DIN3016-1-E2-6-24X15-W1-2-CR: RNCC: 2 | RNVC: 2
DIN3016-E2-6-24X15-W1-2: RNCC: 5 | RNVC: 9

17 Aug 1999

5340-12-701-5138
Mounting Bracket

127015138
VG95211-ML-127015138: RNCC: 2 | RNVC: 2
5.12.6100.1043.98: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-703-3053
Butt Hinge

127033053
VG95211-ML-127033053: RNCC: 2 | RNVC: 2
5.12.0430.9103.98: RNCC: 3 | RNVC: 2

31 Mar 2000

5340-12-381-6531
Bow Handle

123816531
SK1121-187703.000.0: RNCC: 3 | RNVC: 2

12 Mar 2010

5340-12-181-7324
Platte

121817324
81-154: RNCC: 3 | RNVC: 2
90-10477-9: RNCC: 5 | RNVC: 2

12 Dec 1979

5340-12-385-6288
Mounting Bracket

123856288
X00003468: RNCC: 3 | RNVC: 2

22 Jun 2011

5340-12-309-9831
Flush Lock

123099831
281843654A: RNCC: 3 | RNVC: 9

25 Mar 1987

5340-12-311-8692
Angle Bracket

123118692
2300074-4189.00: RNCC: 2 | RNVC: 2
2300074-4189.00: RNCC: 3 | RNVC: 2
2300074-4189.00: RNCC: 5 | RNVC: 9

26 Oct 1987

5340-12-336-7089
Dust And Moisture Seal Protective Plug

123367089
G60455: RNCC: 3 | RNVC: 2
G60455: RNCC: 5 | RNVC: 9

12 Dec 1994

5340-12-179-2809
Double Angle Bracket

121792809
4255260140: RNCC: 3 | RNVC: 2

20 Jun 1979

5340-12-187-6637
Access Cover

121876637
5800110432: RNCC: 3 | RNVC: 2

24 Apr 1981

5340-12-350-3630
Access Cover

123503630
105-21122.04: RNCC: 3 | RNVC: 2

21 Mar 2000

5340-12-140-4071

5340-12-150-7256

5340-12-358-7752
Access Cover

123587752
EZ153165: RNCC: 3 | RNVC: 2

13 Nov 2002

5340-12-360-3720
Bridge Clamp

123603720
0009553601: RNCC: 3 | RNVC: 2
0009553601: RNCC: 5 | RNVC: 2

14 May 2003

5340-12-370-9708
Dust And Moisture Seal Protective Plug

123709708
81461130115: RNCC: 3 | RNVC: 2
81.46113-0115: RNCC: 5 | RNVC: 2
81.46113.0115: RNCC: 5 | RNVC: 2

23 Jan 2007

5340-12-184-4876
Bow Handle

121844876
5800820-134-001: RNCC: 3 | RNVC: 2
5800820-134.001: RNCC: 5 | RNVC: 2

29 Jul 1980

5340-12-310-4582
Dust And Moisture Seal Protective Plug

123104582
910/2967: RNCC: 3 | RNVC: 2
M4ZS460D7167: RNCC: 5 | RNVC: 2
910-2967: RNCC: 5 | RNVC: 2
910296700: RNCC: 5 | RNVC: 2
GPN910/2967: RNCC: 5 | RNVC: 2
GPN910-2967: RNCC: 5 | RNVC: 2

22 May 1987

5340-12-364-8394
Nonmetallic Bumper

123648394
APG3030WS1: RNCC: 3 | RNVC: 2
0716110127: RNCC: 5 | RNVC: 2

6 Nov 2004

5340-12-360-0977
Dust And Moisture Seal Protective Plug

123600977
9419970286: RNCC: 3 | RNVC: 2

7 Apr 2003

5340-12-349-0719
Mounting Bracket

123490719
2300387-612011.000: RNCC: 2 | RNVC: 2
9909011: RNCC: 3 | RNVC: 2
2300387-612011.000: RNCC: 5 | RNVC: 9
9909011: RNCC: 5 | RNVC: 9

21 Sep 1999

5340-12-332-4719
Mending Plate

123324719
0851 7753.099: RNCC: 3 | RNVC: 2
8517753FA T.99: RNCC: 5 | RNVC: 9

13 Aug 1993

5340-12-333-3668
Retaining Strap

123333668
12181: RNCC: 3 | RNVC: 2

7 Dec 1993

5340-12-183-2520
Mending Plate

121832520
51974800182: RNCC: 3 | RNVC: 2
5000270883: RNCC: 5 | RNVC: 2
5000276045: RNCC: 5 | RNVC: 2
5000276045: RNCC: 5 | RNVC: 9

28 Mar 1980

5340-12-193-2021
Webbing Strap

121932021
4617900296: RNCC: 3 | RNVC: 2

30 Jun 1982

5340-12-166-4655
Electrical-Mechanical Equipment Post

121664655
309938105: RNCC: 3 | RNVC: 9
309938105: RNCC: 5 | RNVC: 9

9 Sep 1976

5340-12-353-2162
Dust And Moisture Seal Protective Cap

123532162
08001137: RNCC: 3 | RNVC: 2

12 Feb 2001

5340-12-307-2446
Angle Bracket

123072446
RP988789: RNCC: 3 | RNVC: 2

26 May 1986

5340-12-165-7850
Helical Compression Spring Seat

121657850
2122116EE0146-18: RNCC: 3 | RNVC: 2
0212 2116: RNCC: 5 | RNVC: 2
VDPM00080: RNCC: 5 | RNVC: 2
2122116: RNCC: 5 | RNVC: 9

26 Jun 1976

5340-12-346-9589
Angle Bracket

123469589
65.7058.641-04: RNCC: 3 | RNVC: 2

2 Oct 1998

5340-12-390-4860
Strap Fastener Loop

123904860
SK1145-977222.000.0: RNCC: 3 | RNVC: 2
7112179: RNCC: 5 | RNVC: 2

16 Nov 2012

5340-12-701-6232
Mounting Bracket

127016232
VG95211-ML-127016232: RNCC: 2 | RNVC: 2
5.12.7030.1400.27: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-327-4856
Dust And Moisture Seal Protective Plug

123274856
23176-261032.00.0: RNCC: 2 | RNVC: 2
23176-261032.00.0: RNCC: 3 | RNVC: 2
23176-261032: RNCC: 5 | RNVC: 9

27 Jan 1992

5340-12-356-4845
Nonmetallic Bumper

123564845
2300421-181611.002: RNCC: 2 | RNVC: 2
2300421-181611.002: RNCC: 3 | RNVC: 2
I104002: RNCC: 5 | RNVC: 2
9947001: RNCC: 5 | RNVC: 9

5 Mar 2002

5340-12-330-3748
Mounting Plate

123303748
2300109-181000.128.0: RNCC: 2 | RNVC: 2
2300109-181000.128.0: RNCC: 3 | RNVC: 2

8 Dec 1992

5340-12-365-2517
Mounting Plate

123652517
2500267-190900.005.0: RNCC: 3 | RNVC: 2

11 Dec 2004

5340-12-025-1371

5340-12-330-2348
Retaining Strap

123302348
5057558: RNCC: 3 | RNVC: 9

18 Nov 1992

5340-12-162-4860
Loop Clamp

121624860
100343-1420: RNCC: 2 | RNVC: 2

30 May 1969

5340-12-197-9433
Nonmetallic Bumper

121979433
7800185260: RNCC: 3 | RNVC: 2
5801813-511000: RNCC: 5 | RNVC: 2
5801813-511000: RNCC: 5 | RNVC: 9

2 Dec 1983

5340-12-379-7964
Manual Control Handle

123797964
05570063: RNCC: 3 | RNVC: 2
CV168763: RNCC: 5 | RNVC: 2
05570063: RNCC: 5 | RNVC: 2

2 Sep 2009

5340-12-359-2071
Dust And Moisture Seal Protective Plug

123592071
0730 361 202: RNCC: 3 | RNVC: 2
331929A1: RNCC: 5 | RNVC: 2

9 Jan 2003

5340-12-360-6976
Access Cover

123606976
T991M5006104: RNCC: 3 | RNVC: 2

1 Jul 2003

5340-12-311-8724
Bail Handle

123118724
2300227-341100.011: RNCC: 2 | RNVC: 2
2300227-341100.011: RNCC: 5 | RNVC: 2
2300227-341100.011: RNCC: 5 | RNVC: 9

26 Oct 1987

5340-12-342-0656
Metal Grille

123420656
0.120.007.001: RNCC: 3 | RNVC: 2

5 Dec 1996

5340-12-319-4612
Mending Plate

123194612
374720: RNCC: 3 | RNVC: 2

4 Oct 1989

5340-12-182-8036
Mending Plate

121828036
5669004: RNCC: 3 | RNVC: 2

27 Feb 1980

5340-12-193-8734
Spring Tension Clip

121938734
5545740: RNCC: 3 | RNVC: 2
554.5740: RNCC: 5 | RNVC: 2

8 Sep 1982

5340-12-330-1333
Mounting Bracket

123301333
272.332 388: RNCC: 2 | RNVC: 2
272.332.388: RNCC: 3 | RNVC: 2
272.332 388: RNCC: 5 | RNVC: 9

6 Nov 1992

5340-12-020-4844

5340-12-024-8478

5340-12-040-0233

5340-12-197-8133
Friction Catch Stud

121978133
160-82164-07: RNCC: 3 | RNVC: 2
160-82164-07: RNCC: 5 | RNVC: 9

24 Nov 1983

5340-12-379-1685
Double Angle Bracket

123791685
5803935-42001: RNCC: 2 | RNVC: 2
5803935-42001: RNCC: 3 | RNVC: 2

30 Jun 2009

5340-12-342-8556
Angle Bracket

123428556
5017-230: RNCC: 3 | RNVC: 2

9 Apr 1997

5340-12-311-3693
Mounting Bracket

123113693
5801609-1891.00: RNCC: 2 | RNVC: 2
5801609-1891.00: RNCC: 3 | RNVC: 2

25 Aug 1987

5340-12-318-6376
Double Angle Bracket

123186376
0223 4050: RNCC: 3 | RNVC: 2
02234050: RNCC: 5 | RNVC: 2
02234050ED0141-39: RNCC: 5 | RNVC: 2
2234050ED0141-39: RNCC: 5 | RNVC: 2

2 Aug 1989

5340-12-182-1473
Retaining Strap

121821473
5801505-2142-004: RNCC: 3 | RNVC: 2
5801505-2142.004: RNCC: 5 | RNVC: 2
5801505-2142-004: RNCC: 5 | RNVC: 9

16 Jan 1980

5340-12-378-3895
Mounting Bracket

123783895
2300461-185240.000.0: RNCC: 2 | RNVC: 2
2300461-185240.000.0: RNCC: 3 | RNVC: 2

1 Apr 2009

5340-12-301-3826
Angle Bracket

123013826
P-856026-403: RNCC: 3 | RNVC: 2
P856026-403: RNCC: 5 | RNVC: 2

11 Oct 1984

5340-12-358-4926
Spring Tension Clip

123584926
L.S.101/13-S-SCHWARZ: RNCC: 3 | RNVC: 2

22 Oct 2002

5340-12-335-0744
Mounting Plate

123350744
0048-200000A05B: RNCC: 2 | RNVC: 2
0048-200000A05B: RNCC: 3 | RNVC: 2

20 Jul 1994

5340-12-041-2239

5340-12-372-9950
Butt Hinge

123729950
216 6032: RNCC: 3 | RNVC: 2

14 Sep 2007

5340-12-090-6270

5340-12-332-4654
Dust And Moisture Seal Protective Plug

123324654
1000198-4000.00.01: RNCC: 2 | RNVC: 2

12 Aug 1993

5340-12-350-4828
Nonmetallic Bumper

123504828
12072602: RNCC: 3 | RNVC: 2

5 Apr 2000

5340-12-332-8112
Angle Bracket

123328112
160-75333: RNCC: 3 | RNVC: 2
160-75333: RNCC: 5 | RNVC: 9

22 Sep 1993

5340-12-353-5557
Runner

123535557
11590501: RNCC: 3 | RNVC: 2

6 Apr 2001

5340-12-197-2307
Expansion Plug

121972307
2020110033: RNCC: 3 | RNVC: 2

3 Oct 1983

5340-12-330-4537
Pipe Hanger

123304537
291611767: RNCC: 3 | RNVC: 9

16 Dec 1992

5340-12-194-3930
Angle Bracket

121943930
81155010405: RNCC: 3 | RNVC: 2
81.15501.0405: RNCC: 5 | RNVC: 2

28 Oct 1982

5340-12-020-1570

5340-12-337-9940
Mending Plate

123379940
7147301: RNCC: 3 | RNVC: 2

9 May 1995

5340-12-321-5759
Rod End Clevis

123215759
9164752: RNCC: 3 | RNVC: 2

5 Jun 1990

5340-12-304-0324
Mending Plate

123040324
1103292: RNCC: 3 | RNVC: 2
58510: RNCC: 5 | RNVC: 9

31 May 1985

5340-12-349-4963
Mechanical Stop

123494963
576.999.441: RNCC: 3 | RNVC: 2

23 Nov 1999

5340-12-350-2218
Nonmetallic Bumper

123502218
10063-120000.01: RNCC: 3 | RNVC: 2
10063-120000.01: RNCC: 5 | RNVC: 9

29 Feb 2000

5340-12-347-7433
Mounting Plate

123477433
5842370240: RNCC: 3 | RNVC: 2
584 237 02 40: RNCC: 5 | RNVC: 2

4 Feb 1999

5340-12-356-5084
Angle Bracket

123565084
J92220323-003: RNCC: 3 | RNVC: 2

7 Mar 2002

5340-12-311-2532
Spacing Threaded Standoff

123112532
61558-635: RNCC: 3 | RNVC: 2
KB-61558-635: RNCC: 5 | RNVC: 2

11 Aug 1987

5340-12-192-2463
Helical Compression Spring Seat

121922463
21211-330: RNCC: 3 | RNVC: 2
KB-21211-330: RNCC: 5 | RNVC: 2

5 Apr 1982

5340-12-197-1457
Nonmetallic Bumper

121971457
5801435-080700.02: RNCC: 2 | RNVC: 2
FZ78042 15922: RNCC: 3 | RNVC: 2
5801435-080700-02: RNCC: 5 | RNVC: 2
5801435-080700.02: RNCC: 5 | RNVC: 2

26 Sep 1983

5340-12-334-8784
Access Door

123348784
5840900361: RNCC: 3 | RNVC: 2
584 090 03 61: RNCC: 5 | RNVC: 2

30 Jun 1994

5340-12-195-7881
Electrical-Mechanical Equipment Post

121957881
5800.0182: RNCC: 3 | RNVC: 2
5800-0182: RNCC: 5 | RNVC: 2

18 Apr 1983

5340-12-316-8297
Angle Bracket

123168297
2300279-5000.51: RNCC: 2 | RNVC: 2
2300279-5000.51: RNCC: 3 | RNVC: 2
2300279-5000.51: RNCC: 5 | RNVC: 9

16 Feb 1989

5340-12-305-0596
Sealing Plug Assembly

123050596
0289 5375: RNCC: 3 | RNVC: 2
2895375: RNCC: 5 | RNVC: 2

23 Sep 1985

5340-12-359-5331
Access Cover

123595331
15816101: RNCC: 3 | RNVC: 2

13 Feb 2003

5340-12-304-4731
Webbing Strap

123044731
11.0037: RNCC: 3 | RNVC: 2
110037: RNCC: 5 | RNVC: 2

23 Jul 1985

5340-12-325-3437
Nonmetallic Bumper

123253437
965403280: RNCC: 3 | RNVC: 2
965403250: RNCC: 5 | RNVC: 2

28 May 1991

5340-12-371-9717
Mounting Bracket

123719717
S281M2030102: RNCC: 2 | RNVC: 2
S281M2030102: RNCC: 3 | RNVC: 2

5 Jun 2007

5340-12-375-2135
Access Cover

123752135
L533M1187212: RNCC: 3 | RNVC: 2

5 May 2008

5340-12-024-7444

5340-12-305-4033
Nonmetallic Bumper

123054033
320-22329-06: RNCC: 3 | RNVC: 2

31 Oct 1985

5340-12-311-2918
Support Hook

123112918
NO PRIMARY REF 12-311-2918: RNCC: 3 | RNVC: 2
7501 140850: RNCC: 5 | RNVC: 9

13 Aug 1987

5340-12-343-1355
Access Cover

123431355
5026-041: RNCC: 3 | RNVC: 2

6 May 1997

5340-12-168-6554
Expansion Plug

121686554
DIN443-18-ST-PHR: RNCC: 2 | RNVC: 2
8409049: RNCC: 5 | RNVC: 2
000443018000: RNCC: 5 | RNVC: 2
18DIN443PHR: RNCC: 5 | RNVC: 2
DIN443-18-PHR: RNCC: 5 | RNVC: 2

25 Mar 1977

5340-12-338-7866
Magnetic Catch

123387866
3296847: RNCC: 3 | RNVC: 2
32968471: RNCC: 5 | RNVC: 9

24 Aug 1995

5340-12-092-2794

5340-12-161-0982
Retaining Strap

121610982
160-33097: RNCC: 3 | RNVC: 2
160-33097: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-199-0799
Mending Plate

121990799
3828910043: RNCC: 3 | RNVC: 2

23 Mar 1984

5340-12-345-8817
Permanent Magnet

123458817
100 324-303#400: RNCC: 3 | RNVC: 2
100 324-303#400: RNCC: 3 | RNVC: 9

11 May 1998

5340-12-361-5048
Fuehrungs- Schiene

123615048
142 042: RNCC: 3 | RNVC: 2
142 042: RNCC: 5 | RNVC: 2

9 Oct 2003

5340-12-185-4838
Halter

121854838
3553937: RNCC: 3 | RNVC: 2

11 Oct 1980

5340-12-132-0686
Loop Clamp

121320686
4045460075: RNCC: 3 | RNVC: 2

30 May 1969

5340-12-042-0310

5340-12-326-6011
Strapping Seal

123266011
SP 18-W1 VERZINKT: RNCC: 3 | RNVC: 2
SP 18-W1: RNCC: 5 | RNVC: 2

11 Oct 1991

5340-12-317-9606
Manual Control Lever

123179606
04410-25: RNCC: 3 | RNVC: 2
441-25: RNCC: 5 | RNVC: 9
NLM4410-25: RNCC: 5 | RNVC: 9

30 May 1989

5340-12-319-3815
Multiple Angle Bracket

123193815
5802006-621000.03: RNCC: 2 | RNVC: 2
5802006-621000.03: RNCC: 3 | RNVC: 2

27 Sep 1989

5340-12-318-5845
Mending Plate

123185845
4357407212: RNCC: 3 | RNVC: 2
4357407212: RNCC: 3 | RNVC: 9

31 Jul 1989

5340-12-323-4691
Loop Clamp

123234691
0117 3222: RNCC: 3 | RNVC: 2
GM10004-028: RNCC: 5 | RNVC: 2
3.0402.02.0.0009: RNCC: 5 | RNVC: 2
H3144-A28X73-ST-NBR: RNCC: 5 | RNVC: 2
1202 7450: RNCC: 5 | RNVC: 2
3.0402.02.0.0009: RNCC: 5 | RNVC: 9
1202 7450: RNCC: 5 | RNVC: 9

28 Nov 1990

5340-12-350-6021
Access Cover

123506021
23176-207200.10.0: RNCC: 2 | RNVC: 2
23176-207200.10.0: RNCC: 3 | RNVC: 2

18 Apr 2000

5340-12-353-3966
Access Cover

123533966
521-180500.10.0: RNCC: 2 | RNVC: 2
521-180500.10.0: RNCC: 3 | RNVC: 2

20 Mar 2001

5340-12-183-9883
Clamping Catch

121839883
1102 FORM A-ZN: RNCC: 3 | RNVC: 2
1102AZN: RNCC: 5 | RNVC: 2
A1102ZN: RNCC: 5 | RNVC: 2
WERKN0RM1102F0RMAZN: RNCC: 5 | RNVC: 2
1102F0RMAZN: RNCC: 5 | RNVC: 9

10 Jun 1980

5340-12-343-0877
Spacing Threaded Standoff

123430877
VG95148B5,5XM3X10-CUZN: RNCC: 2 | RNVC: 2
18H2460: RNCC: 3 | RNVC: 2
VG95148-B5,5XM3X10-CUZN: RNCC: 3 | RNVC: 2
6.06298: RNCC: 5 | RNVC: 2
6.06298.O: RNCC: 5 | RNVC: 2

28 Apr 1997

5340-12-337-9760
Angle Bracket

123379760
947199477: RNCC: 3 | RNVC: 2

8 May 1995

5340-12-330-2558
Mounting Bracket

123302558
050.100.602: RNCC: 3 | RNVC: 2

21 Nov 1992

5340-12-364-0046
Dust And Moisture Seal Protective Plug

123640046
735084050000: RNCC: 3 | RNVC: 2

11 Aug 2004

5340-12-304-4828
Anchor Strap

123044828
2300106-260200.16: RNCC: 2 | RNVC: 2
2300106-260200.16: RNCC: 3 | RNVC: 2
2300106-260200.16: RNCC: 5 | RNVC: 9
2300106-260200.16: RNCC: 5 | RNVC: 9

23 Jul 1985

5340-12-094-4189

5340-12-193-0235
Dust And Moisture Seal Protective Cap

121930235
913018008100: RNCC: 3 | RNVC: 2
A8X6,5N13018: RNCC: 5 | RNVC: 2
A8X6-5N13018: RNCC: 5 | RNVC: 2

15 Jun 1982

5340-12-323-8888
Retaining Strap

123238888
160-23289-02: RNCC: 3 | RNVC: 2
15160-23289.02: RNCC: 5 | RNVC: 2
160-23289-02: RNCC: 5 | RNVC: 9

4 Jan 1991

5340-12-370-5735
Manual Control Lever

123705735
V6520-03011-109: RNCC: 2 | RNVC: 2
V6520-03011-109: RNCC: 3 | RNVC: 2

23 Nov 2006

5340-12-325-7611
Dust And Moisture Seal Protective Plug

123257611
700M6: RNCC: 3 | RNVC: 2
GPN700M6: RNCC: 5 | RNVC: 2
GPN700-M6: RNCC: 5 | RNVC: 9

5 Jul 1991

5340-12-145-6346
Nonmetallic Bumper

121456346
23114-2807.10: RNCC: 2 | RNVC: 2
23114-2807.10: RNCC: 3 | RNVC: 2
40.514.01: RNCC: 3 | RNVC: 2
23114-2807-10: RNCC: 5 | RNVC: 2
40-514-00: RNCC: 5 | RNVC: 2
40-514-01: RNCC: 5 | RNVC: 2
23114-2807-10: RNCC: 5 | RNVC: 9
23114-2807-10: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-199-1191
Angle Bracket

121991191
2300088-103322.02: RNCC: 2 | RNVC: 2
2300088-103322.02: RNCC: 3 | RNVC: 2
2300088-103322-02: RNCC: 5 | RNVC: 9
2300088-103322.02: RNCC: 5 | RNVC: 9

28 Mar 1984

5340-12-310-0096
Access Cover

123100096
1361013-51073.07: RNCC: 3 | RNVC: 2
1361013-51073-07: RNCC: 5 | RNVC: 2

27 Mar 1987

5340-12-364-7775
Strap Fastener Loop

123647775
2339-180121A00C: RNCC: 3 | RNVC: 2

29 Oct 2004

5340-12-198-7711
Lock-Release Lever

121987711
4900123-1310.01: RNCC: 2 | RNVC: 2
4900123-1310.01: RNCC: 3 | RNVC: 2
4900123-1310.01: RNCC: 5 | RNVC: 9

24 Feb 1984

5340-12-342-2646
Helical Compression Spring Seat

123422646
412928 442 22 34 00: RNCC: 3 | RNVC: 2
P36288-44V: RNCC: 5 | RNVC: 2
V36288-44: RNCC: 5 | RNVC: 2
V3628844: RNCC: 5 | RNVC: 2

13 Jan 1997

5340-12-153-6154
Double Angle Bracket

121536154
42093-10-21: RNCC: 3 | RNVC: 2
42093-10-21: RNCC: 3 | RNVC: 2
42093-10-21: RNCC: 5 | RNVC: 9

30 May 1969

5340-12-389-3174
Mounting Bracket

123893174
2300002-122452.000: RNCC: 2 | RNVC: 2
2300002-122452.000: RNCC: 3 | RNVC: 2

20 Jun 2012

5340-12-305-4675
Metal Runner

123054675
5802017-450000.01: RNCC: 2 | RNVC: 2
5802017-450000.01: RNCC: 3 | RNVC: 2

11 Nov 1985

5340-12-350-1893
Angle Bracket

123501893
2125-115400.12B: RNCC: 2 | RNVC: 2
2125-115400.12B: RNCC: 3 | RNVC: 2

25 Feb 2000

5340-12-357-0162
Access Cover

123570162
HRS3-DPSTBL: RNCC: 3 | RNVC: 2

24 Apr 2002

5340-12-301-7486
Butt Hinge Leaf

123017486
2300107-310220: RNCC: 2 | RNVC: 2
2300107-310220: RNCC: 3 | RNVC: 2
2300107-310220: RNCC: 5 | RNVC: 9
2300107-310220: RNCC: 5 | RNVC: 9

7 Nov 1984

5340-12-367-8353
Section Block Clamp

123678353
5559951668: RNCC: 3 | RNVC: 2

20 Oct 2005

5340-12-319-5419
Latch Bar

123195419
731.06.045: RNCC: 3 | RNVC: 2
V731.06.045: RNCC: 5 | RNVC: 2

11 Oct 1989

5340-12-387-5912
Tie Down Adapter

123875912
5803674-213500.00: RNCC: 2 | RNVC: 2
7804234680: RNCC: 3 | RNVC: 2

12 Jan 2012

5340-12-384-2324
Mounting Bracket

123842324
SK1331-977261.000.0: RNCC: 3 | RNVC: 2

4 Feb 2011

5340-12-330-2509
Lock-Release Lever

123302509
590660-0306.000: RNCC: 3 | RNVC: 2

21 Nov 1992

5340-12-123-3164
Leather Strap

121233164
F5565-10-01.05: RNCC: 3 | RNVC: 2
5565-10-01.05: RNCC: 3 | RNVC: 2
5565-10-01-05: RNCC: 5 | RNVC: 2
F5565-10-01-05: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-163-9206
Support Hook

121639206
1221-7385-02-00-25: RNCC: 3 | RNVC: 9

30 May 1969

5340-12-363-1301
Retaining Strap

123631301
DIN5533-17-AL: RNCC: 2 | RNVC: 2

6 May 2004

5340-12-305-0500
Access Cover

123050500
5801759-011100.000: RNCC: 2 | RNVC: 2
5801759-011100.000: RNCC: 3 | RNVC: 2
5801759-011100.000: RNCC: 5 | RNVC: 9

20 Sep 1985

5340-12-361-4477
Dust And Moisture Seal Protective Cap

123614477
81971040012: RNCC: 3 | RNVC: 2
81.97104-0012: RNCC: 5 | RNVC: 9

1 Oct 2003

5340-12-158-6916
Luggage Lock

121586916
068380: RNCC: 3 | RNVC: 2
329-20939: RNCC: 5 | RNVC: 2

30 May 1969

5340-12-343-1749
Nonmetallic Bumper

123431749
1222-091: RNCC: 3 | RNVC: 2

13 May 1997

5340-12-701-9952
Loop Clamp

127019952
VG95211-ML-127019952: RNCC: 2 | RNVC: 2
155N464-604: RNCC: 3 | RNVC: 2

6 Apr 1995

5340-12-380-3662
Loop Clamp

123803662
RSGU1.16-12W1: RNCC: 3 | RNVC: 2

23 Oct 2009

5340-12-341-2000
Protection Bellows

123412000
2300211-208211.017.0: RNCC: 2 | RNVC: 2
2300211-208211.017.0: RNCC: 3 | RNVC: 2
9875688: RNCC: 5 | RNVC: 9
2300211-208211.017.0: RNCC: 5 | RNVC: 9

8 Aug 1996

5340-12-701-3083
Mounting Bracket

127013083
VG95211-ML-127013083: RNCC: 2 | RNVC: 2
5.12.5101.6590.03: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-343-0182
Handwheel

123430182
5004-053: RNCC: 3 | RNVC: 2

22 Apr 1997

5340-12-701-6173
Mounting Plate

127016173
VG95211-ML-127016173: RNCC: 2 | RNVC: 2
5.12.7010.1670.00: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-12-338-4665
Mounting Bracket

123384665
537239-2150.000: RNCC: 3 | RNVC: 2
537239-2150.000: RNCC: 5 | RNVC: 9

14 Jul 1995

5340-12-198-0949
Double Angle Bracket

121980949
5801411-331121.003: RNCC: 3 | RNVC: 2
5801411-331121.003: RNCC: 5 | RNVC: 9

20 Dec 1983

5340-12-357-1566
Bow Handle

123571566
06920-16003: RNCC: 3 | RNVC: 2
NLM06920-16003: RNCC: 5 | RNVC: 2

14 May 2002

5340-12-177-3587
Dust And Moisture Seal Protective Cap

121773587
BP02: RNCC: 3 | RNVC: 2
FG797-02-0800: RNCC: 5 | RNVC: 2

29 Jan 1979

5340-12-195-8045
Mending Plate

121958045
160-41649-04: RNCC: 3 | RNVC: 2
160-41649-04: RNCC: 5 | RNVC: 9

19 Apr 1983

5340-12-370-2291
Stativteil

123702291
31032: RNCC: 3 | RNVC: 2

9 Oct 2006

5340-12-390-0551
Loop Clamp

123900551
015763: RNCC: 3 | RNVC: 2
1388601: RNCC: 5 | RNVC: 2
CV172756: RNCC: 5 | RNVC: 2
1388601: RNCC: 5 | RNVC: 2

27 Sep 2012

5340-12-330-4507
Webbing Strap

123304507
022040-612200: RNCC: 2 | RNVC: 2
022040-612200: RNCC: 3 | RNVC: 2

16 Dec 1992

5340-12-307-7056
Angle Bracket

123077056
RP988971: RNCC: 3 | RNVC: 2

17 Jul 1986

5340-12-319-6574
Rod End Clevis

123196574
M513099: RNCC: 3 | RNVC: 9
M513099: RNCC: 5 | RNVC: 2

23 Oct 1989

5340-12-300-2804
Resilient Mount

123002804
3093100877: RNCC: 3 | RNVC: 2

20 Jul 1984

5340-12-094-6679

5340-12-365-8619
Mounting Bracket

123658619
207561: RNCC: 3 | RNVC: 2

15 Feb 2005

5340-12-176-8611
Helical Compression Spring Seat

121768611
11341250233: RNCC: 3 | RNVC: 9

20 Dec 1978

5340-12-193-8576
Lock-Release Lever

121938576
3740047961: RNCC: 3 | RNVC: 2
8690940120: RNCC: 5 | RNVC: 2

7 Sep 1982

5340-12-190-0311
Electrical-Mechanical Equipment Post

121900311
3422022036: RNCC: 3 | RNVC: 2
34220 22036: RNCC: 5 | RNVC: 9

4 Nov 1981

5340-12-322-1160
Manual Control Lever

123221160
9000 8233: RNCC: 3 | RNVC: 2

25 Jul 1990

5340-12-359-1513
Mounting Bracket

123591513
ZG5200G357: RNCC: 3 | RNVC: 2
ZG5200G357: RNCC: 5 | RNVC: 9
ZG5200G357ST: RNCC: 5 | RNVC: 9

20 Dec 2002

5340-12-380-5351
Angle Bracket

123805351
5502030343: RNCC: 3 | RNVC: 2

5 Nov 2009

5340-12-310-2380
Door Button

123102380
6131624: RNCC: 3 | RNVC: 2

24 Apr 1987

5340-12-187-0837
Ball Socket Seat

121870837
0009910922: RNCC: 3 | RNVC: 2

5 Mar 1981

5340-12-388-9786
Sealing Plug Assembly

123889786
167107569902: RNCC: 3 | RNVC: 2

11 May 2012

5340-12-320-7336
Retaining Strap

123207336
54.0062.982.02: RNCC: 3 | RNVC: 2

12 Feb 1990

5340-12-326-5129
Runner

123265129
4627600077: RNCC: 3 | RNVC: 2

26 Sep 1991

5340-12-193-3987
Dust And Moisture Seal Protective Cap

121933987
01TC34236: RNCC: 3 | RNVC: 2

19 Jul 1982

5340-12-193-8721
Mending Plate

121938721
5548740: RNCC: 3 | RNVC: 2
554.8740: RNCC: 5 | RNVC: 2

8 Sep 1982

5340-12-317-3543
Rod End Clevis

123173543
100332-12300.01: RNCC: 2 | RNVC: 2
100332-12300.01: RNCC: 3 | RNVC: 2

30 Mar 1989

5340-12-393-2779
Track Stop

123932779
37017620: RNCC: 3 | RNVC: 2
000000033537: RNCC: 5 | RNVC: 2

4 Sep 2013

Load More Results