What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

Hardware, Commercial - Canada (CA)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Canada (CA) - NCB is 20 or 21

Page 61 of 64

NSN Format for Hardware, Commercial
Codified by Canada

53	40	21	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Canada (CA)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 190 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 63 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 26 Items
What is a Rod End Connector? 44 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 69 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 226 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 94 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 20 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 582 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 43 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 202 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 65 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Shelf Bracket? 33 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Door Hook And Eye? 22 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 77 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 12 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 23 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 23 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 44 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 13 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is a Friction Catch? 38 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 15 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 39 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 26 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 86 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 20 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 42 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 91 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 57 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 25 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 163 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 101 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 21 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 16 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 288 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 52 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 23 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 131 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 24 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 41 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 70 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 45 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 210 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 163 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 82 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 44 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 38 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 25 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 20 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 42 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 18 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Glazier Point? 10 Items: A Glazier Point (POINT,GLAZIER) is a piece of thin sheet metal, triangular or diamond shaped, designed to hold a pane of glass in a wooden sash.
What is an Angle Bracket? 1105 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 81 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 32 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1130 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 20 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 49 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 37 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Quick Release Plunger? 13 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 114 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flush Catch? 97 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 13 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 86 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 115 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 177 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 24 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 53 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 219 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 40 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 494 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 353 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 55 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 51 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 12 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 601 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 32 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 39 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 34 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 41 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 21 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping? 19 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 93 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 117 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 31 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 45 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 19 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 832 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 35 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 40 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 75 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 106 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Picture Hanger? 10 Items: A Picture Hanger (HANGER,PICTURE) is a hook like device that is secured to walls, bulkheads, columns and the like, by means of a nail, screw, magnet or adhesive backed cloth, that is included with and/or attached to the hook. It is designed to hold and suspend variuos items such as photographs, paintings, maps, documents, etc.
What is a Protection Bellows? 16 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 57 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 49 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 2535 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 19 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 16 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 1222 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 48 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 64 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Threaded Hinged Standoff? 11 Items: A Threaded Hinged Standoff (STANDOFF,HINGED,THREADED) is a standoff, internally and/or externally, threaded on both ends with a hinge or pivot point to allow for independent movement of the ends.
What is a Spacing Threaded Standoff? 178 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 115 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a Crank Handle? 13 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 29 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Mechanic Equipment Hardware Kit? 87 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Dust And Moisture Seal Protective Cover? 38 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 51 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 308 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 41 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 39 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 178 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 27 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 80 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 86 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 61 of 64

5340-21-913-4842
Seal Retaining Plate

219134842
222-209-036: RNCC: 3 | RNVC: 2

24 Nov 1996

5340-21-914-1947
Guide

219141947
1205-535-12: RNCC: 3 | RNVC: 2

7 Aug 1998

5340-20-007-5910
Metal Grille

200075910
10703280-011PEW: RNCC: 3 | RNVC: 2
10703280: RNCC: D | RNVC: 9

19 Apr 2013

5340-20-005-5765
Double Angle Bracket

200055765
AC49017-06: RNCC: 3 | RNVC: 2
0752086: RNCC: 5 | RNVC: 2

17 May 2010

5340-21-921-1477
Key Blank

219211477
DA-05053-08/GR-4: RNCC: 3 | RNVC: 2

14 May 2001

5340-20-006-3878
Lh Panel

200063878
85311468-101: RNCC: 3 | RNVC: 2

28 Jun 2011

5340-21-921-6903
Mounting Bracket

219216903
10656543-001: RNCC: 3 | RNVC: 2

21 Feb 2002

5340-21-860-5787
Electrical-Mechanical Equipment Post

218605787
192-150: RNCC: 3 | RNVC: 2

15 Oct 1970

5340-21-847-4943
Friction Catch

218474943
807N: RNCC: 3 | RNVC: 2
69GP8: RNCC: 4 | RNVC: 1
34331: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-921-7345
Mounting Bracket

219217345
10651048: RNCC: 3 | RNVC: 2

4 Mar 2002

5340-20-006-1325
Angle Bracket

200061325
446-83029-1: RNCC: 3 | RNVC: 2

22 Feb 2011

5340-21-905-5565
Nonmetallic Bumper

219055565
10514427: RNCC: 3 | RNVC: 2

1 Jun 1989

5340-21-912-9989
Spring Tension Clip

219129989
DL114: RNCC: 3 | RNVC: 2
1404613: RNCC: 5 | RNVC: 2

7 Feb 1996

5340-21-913-3413
Mounting Plate

219133413
6245825: RNCC: 3 | RNVC: 2

1 Nov 1996

5340-20-012-0517

5340-20-002-4040
Mounting Plate

200024040
130014DE412-1: RNCC: 3 | RNVC: 2
130014DE412: RNCC: D | RNVC: 9

15 Dec 2005

5340-21-860-5594
Butt Hinge

218605594
F191: RNCC: 3 | RNVC: 1
F191-3 1/2 X 3 1/2: RNCC: 3 | RNVC: 2
F191-3-1-2 IN: RNCC: 3 | RNVC: 2

15 Oct 1970

5340-21-660-1691
Expansion Shield

216601691
01012: RNCC: 3 | RNVC: 2
101-1012: RNCC: 3 | RNVC: 2
1012: RNCC: 3 | RNVC: 2
20: RNCC: 5 | RNVC: 2
115-0726: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-908-4441
Strap Fastener Loop

219084441
1100-13: RNCC: 3 | RNVC: 2

9 Jul 1992

5340-20-005-5847
Mounting Bracket

200055847
AC40120-05: RNCC: 3 | RNVC: 2

18 May 2010

5340-20-006-1056
Rod End Clevis

200061056
0656-032955-03: RNCC: 3 | RNVC: 2

10 Feb 2011

5340-21-920-9566
Dust And Moisture Seal Protective Plug

219209566
5659-10: RNCC: 3 | RNVC: 1
10608650-1: RNCC: 3 | RNVC: 2

14 Dec 2000

5340-21-913-4149
Assembly Cover

219134149
10627608-PG: RNCC: 3 | RNVC: 2
10627608: RNCC: D | RNVC: 9

17 Feb 1998

5340-20-007-9669
Spacing Threaded Standoff

200079669
TD2201/03020: RNCC: 3 | RNVC: 2
ISO3506 M3-20-M3X8-CRES: RNCC: 5 | RNVC: 2
TD2201/03020M3-20-M3/B-CRES: RNCC: 5 | RNVC: 2

2 Oct 2013

5340-20-004-6971
Adapter Plate Assem

200046971
B30601-834-1: RNCC: 3 | RNVC: 2
B30601-834: RNCC: 5 | RNVC: 1

24 Mar 2009

5340-20-002-4042
Mounting Bracket

200024042
130014DE262-1: RNCC: 3 | RNVC: 2
130014DE262: RNCC: D | RNVC: 9

15 Dec 2005

5340-20-000-8062
Mounting Plate

200008062
200H-0012-0: RNCC: 3 | RNVC: 2

3 Jun 2003

5340-20-006-3205
Access Cover

200063205
10665345-011PEW: RNCC: 3 | RNVC: 2

30 May 2011

5340-21-863-3450
Expansion Shield

218633450
4012: RNCC: 3 | RNVC: 2
4012-00000: RNCC: 3 | RNVC: 2
4012-00000: RNCC: 3 | RNVC: 2
115-0464: RNCC: 6 | RNVC: 9

13 Jan 1972

5340-21-884-0877
Mount

218840877
206-073-173-001: RNCC: 3 | RNVC: 2
206-073-173-1: RNCC: 5 | RNVC: 2

5 May 1981

5340-21-897-8661
Top Pin

218978661
34-101: RNCC: 3 | RNVC: 2

14 Feb 1985

5340-21-844-5354
Expansion Plug

218445354
325-0001: RNCC: 3 | RNVC: 2

22 Jun 1967

5340-21-908-3990
Dust And Moisture Seal Protective Plug

219083990
1100-29: RNCC: 3 | RNVC: 2
1118-10: RNCC: 5 | RNVC: 1

18 Mar 1992

5340-21-816-0923

5340-21-803-7047

5340-20-007-5062
Mounting Bracket

200075062
B30603-703-2: RNCC: 3 | RNVC: 2

5 Mar 2013

5340-21-860-7543
Nylon Insert

218607543
E99-14-20: RNCC: 3 | RNVC: 2
5316489A1: RNCC: 3 | RNVC: 2

14 Jan 1971

5340-21-852-5698
General Purpose Resilient Mount

218525698
51806: RNCC: 3 | RNVC: 2
ALS150-1 AND-2: RNCC: 3 | RNVC: 2
ALS150-1AND2: RNCC: 3 | RNVC: 2
8B7-150: RNCC: 3 | RNVC: 2
ALS150-1 AND-2: RNCC: 3 | RNVC: 2
X703925-11 AND-12: RNCC: 5 | RNVC: 1
AP2139: RNCC: 5 | RNVC: 2
ARL150-1AND2: RNCC: 5 | RNVC: 2

1 Dec 1968

5340-21-908-0569
Latch Assembly

219080569
080-0008: RNCC: 3 | RNVC: 2
100-80-0008: RNCC: 5 | RNVC: 2

29 Jan 1991

5340-20-006-7324
Double Angle Bracket

200067324
14584072: RNCC: 3 | RNVC: 2

13 Feb 2012

5340-20-003-1908
Mounting Bracket

200031908
541312: RNCC: 3 | RNVC: 2
541312: RNCC: 5 | RNVC: 2

6 Feb 2007

5340-21-660-2102
Padlock

216602102
840B: RNCC: 3 | RNVC: 2
840B: RNCC: 3 | RNVC: 2

29 Jun 1965

5340-21-815-3627
Butt Hinge

218153627
AN257C4-7200: RNCC: 3 | RNVC: 2

26 Jun 1964

5340-21-911-1394
Mounting Bracket

219111394
8142-32: RNCC: 3 | RNVC: 2

10 Dec 1993

5340-20-005-2785
Mounting Bracket

200052785
0656-039976-10: RNCC: 3 | RNVC: 2

27 Jan 2010

5340-20-005-6055
Plug Button

200056055
AC10100-100: RNCC: 3 | RNVC: 2

20 May 2010

5340-21-896-2126
Angle Bracket

218962126
MS9600-096: RNCC: 3 | RNVC: 2

20 May 1984

5340-21-905-5969
Mounting Bracket

219055969
704-133600-906-0: RNCC: 3 | RNVC: 2

28 Apr 1990

5340-20-000-8424
Metal Grille

200008424
356H-0027-0: RNCC: 3 | RNVC: 2

17 Jun 2003

5340-21-921-1478
Key Blank

219211478
DA-05053-09/GR-4: RNCC: 3 | RNVC: 2

15 May 2001

5340-21-898-4073
Butt Hinge

218984073
F179-4 1/2 X4C2G: RNCC: 3 | RNVC: 2
F179-4-1-2X4C2G: RNCC: 3 | RNVC: 2

28 Feb 1985

5340-20-000-3521
Mounting Bracket

200003521
10656585-011PW: RNCC: 3 | RNVC: 2

21 Aug 2002

5340-20-006-4180
Spacing Threaded Standoff

200064180
AC86395-02-06-07: RNCC: 3 | RNVC: 2

14 Jul 2011

5340-20-008-6458
Caster Wheel

5340-21-897-8159
Expansion Plug

218978159
260-032: RNCC: 3 | RNVC: 2
FP8: RNCC: 3 | RNVC: 2

12 Dec 1984

5340-21-901-9007
Dust And Moisture Seal Protective Plug

219019007
BS2552-61-00-008: RNCC: 3 | RNVC: 2

3 May 1988

5340-20-007-0840
Dust And Moisture Seal Protective Cap

200070840
TFA-38-G: RNCC: 3 | RNVC: 2
10608658-6: RNCC: 7 | RNVC: 2
10608658: RNCC: D | RNVC: 9

15 Aug 2012

5340-21-920-1332
Rebound Rubber.

219201332
AUS110-13-341: RNCC: 3 | RNVC: 2
110-13-341: RNCC: 6 | RNVC: 9

18 May 1999

5340-21-898-4650
Expansion Shield

218984650
159685: RNCC: 3 | RNVC: 2
315-9685: RNCC: 3 | RNVC: 2
9685: RNCC: 3 | RNVC: 2

15 Aug 1985

5340-20-003-5100
Mounting Bracket

200035100
10642443-PW: RNCC: 3 | RNVC: 2
10642443: RNCC: 5 | RNVC: 1

6 Aug 2007

5340-21-814-1376

5340-21-814-7782

5340-20-005-7884
Bumper

200057884
6348C339-1: RNCC: 3 | RNVC: 2

11 Aug 2010

5340-21-913-0792
Door Hinge

219130792
9300: RNCC: 3 | RNVC: 2

12 Apr 1996

5340-21-873-2799
Angle Bracket

218732799
3082: RNCC: 3 | RNVC: 2

26 Feb 1976

5340-20-002-8580
Webbing Strap

200028580
10665848-001: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-20-003-1774
Clamp

200031774
10658281-001: RNCC: 3 | RNVC: 2
10658281: RNCC: 5 | RNVC: 1

25 Jan 2007

5340-20-003-4834
Mounting Bracket

200034834
10666382-011PW: RNCC: 3 | RNVC: 2
10666382: RNCC: 5 | RNVC: 1

26 Jul 2007

5340-21-911-1507
Nonmetallic Bumper

219111507
SJ-5009 021200 184352: RNCC: 3 | RNVC: 2

10 Mar 1994

5340-21-848-2949
Expansion Shield

218482949
6860-00200: RNCC: 3 | RNVC: 2
6860-2: RNCC: 3 | RNVC: 2
6860-00200: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-660-0237
Butt Hinge

216600237
804: RNCC: 3 | RNVC: 1
804-2 1/2 IN: RNCC: 3 | RNVC: 2
804 2 1/2 X 2 1/2: RNCC: 3 | RNVC: 2
804-2 1/2 IN: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-911-1395
Mounting Bracket

219111395
8142-82: RNCC: 3 | RNVC: 2

10 Dec 1993

5340-20-000-1440
Mounting Bracket

200001440
10656434-011PG: RNCC: 3 | RNVC: 2

13 May 2002

5340-20-002-5651
Roller

200025651
7402-053-1: RNCC: 3 | RNVC: 2

15 Mar 2006

5340-20-007-7288
Mounting Bracket

200077288
10707588-011: RNCC: 3 | RNVC: 2
10707588: RNCC: D | RNVC: 9

26 Jun 2013

5340-21-905-5976
Left Lock

219055976
TE10000464-001: RNCC: 3 | RNVC: 2

4 Apr 1990

5340-20-001-0736
Double Angle Bracket

200010736
8882047-1: RNCC: 3 | RNVC: 2
8882047-1: RNCC: 3 | RNVC: 2

17 Oct 2003

5340-20-000-1758
Mounting Bracket

200001758
9379095-2: RNCC: 3 | RNVC: 2

30 May 2002

5340-21-895-0286
Clamp Assembly

218950286
100112: RNCC: 3 | RNVC: 2

23 Jan 1984

5340-20-001-6258
Mounting Bracket

200016258
10658549-011PG: RNCC: 3 | RNVC: 2
10658549: RNCC: D | RNVC: 9

16 Sep 2004

5340-20-005-1165
Mounting Plate

200051165
542410-1: RNCC: 3 | RNVC: 2

20 Oct 2009

5340-21-107-4532
Rubber Mounting Pad

211074532
3008274: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-882-8632
Angle Bracket

218828632
2-14-243-1: RNCC: 3 | RNVC: 2
2-14-0243-1: RNCC: 5 | RNVC: 2

13 Aug 1980

5340-21-920-0848
Bracket Assembly

219200848
9877712: RNCC: 3 | RNVC: 2
9877712-1: RNCC: 3 | RNVC: 2

4 May 1999

5340-20-000-4899
Angle Bracket

200004899
9575984-2: RNCC: 3 | RNVC: 2
9575984: RNCC: D | RNVC: 9

28 Oct 2002

5340-21-896-9963
Key Blank

218969963
X1-77-6: RNCC: 3 | RNVC: 2
X1-77-6: RNCC: 3 | RNVC: 2

19 Nov 1984

5340-21-921-2071
Mounting Plate

219212071
68325: RNCC: 3 | RNVC: 2

27 Jun 2001

5340-21-849-6174
Strapping

218496174
1: RNCC: 3 | RNVC: 1
NO1: RNCC: 3 | RNVC: 1
N01: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-914-1096
Butt Hinge Leaf

219141096
WW487393: RNCC: 3 | RNVC: 2
59.29.108.A: RNCC: 5 | RNVC: 2

27 Jun 1997

5340-21-810-5280
Dust And Moisture Seal Boot

218105280
176842-800: RNCC: 3 | RNVC: 2

20 Mar 1964

5340-21-114-8963
Loop Clamp

211148963
140788: RNCC: 3 | RNVC: 2
140788: RNCC: 5 | RNVC: 2

6 Jun 1968

5340-21-912-6802
Mounting Plate

219126802
WW 217 330 AU: RNCC: 3 | RNVC: 2

7 Sep 1995

5340-20-003-0595
Turnbuckle

200030595
C91001-160-1: RNCC: 3 | RNVC: 2

1 Dec 2006

5340-21-870-9844
Electrical-Mechanical Equipment Post

218709844
756-6711-002: RNCC: 3 | RNVC: 2

13 Oct 1976

5340-21-911-8341
Mounting Bracket

219118341
MT5001-30-168: RNCC: 3 | RNVC: 2

13 May 1994

5340-21-893-7958
Screw

218937958
79-28: RNCC: 3 | RNVC: 2

27 Aug 1983

5340-20-003-8533
Slam Lock

200038533
700-1148: RNCC: 3 | RNVC: 2

18 Jan 2008

5340-21-889-8488
Nonmetallic Bumper

218898488
SM-C-550577: RNCC: 3 | RNVC: 2

21 Jun 1982

5340-20-007-7073
Mounting Bracket

200077073
720712-001: RNCC: 3 | RNVC: 2

13 Jun 2013

5340-20-003-3119
Contact Plate

200033119
A20618-210-1: RNCC: 3 | RNVC: 2
A20618-210-1: RNCC: 5 | RNVC: 2

19 Apr 2007

5340-21-905-5249
Swivel Caster

219055249
2-5070-43: RNCC: 3 | RNVC: 2

28 Oct 1988

5340-21-920-1226
Manual Control Lever

219201226
AED69622-1: RNCC: 3 | RNVC: 2
AED69622-1: RNCC: 5 | RNVC: 9

14 May 1999

5340-21-914-8076
Mounting Plate

219148076
1205-534-8: RNCC: 3 | RNVC: 2

1 Sep 1998

5340-20-007-7972
Mounting Plate

200077972
0656-038600-03: RNCC: 3 | RNVC: 2

25 Jul 2013

5340-20-007-7576
Mounting Bracket

200077576
10684376-011PEG: RNCC: 3 | RNVC: 2
10684376: RNCC: D | RNVC: 9

8 Jul 2013

5340-20-006-0074
Mounting Bracket

200060074
0656-035221-12: RNCC: 3 | RNVC: 2

20 Dec 2010

5340-21-862-6160
Expansion Shield

218626160
251-07862: RNCC: 3 | RNVC: 2
251-2618: RNCC: 3 | RNVC: 2
2618: RNCC: 3 | RNVC: 2

16 Sep 1971

5340-21-877-3204
Plug Button

218773204
B-1833: RNCC: 3 | RNVC: 2
31526: RNCC: 5 | RNVC: 2

18 Oct 1977

5340-21-921-1891
Padlock

219211891
806568-671-017: RNCC: 3 | RNVC: 2

13 Jun 2001

5340-20-005-5954
Multiple Angle Bracket

200055954
AC40341-07: RNCC: 3 | RNVC: 2

18 May 2010

5340-20-001-5346
Retaining Clamp

200015346
DE-4499-2: RNCC: 3 | RNVC: 2

14 Jul 2004

5340-20-008-1602
Bottom Assy Cover

200081602
10674179-011PW: RNCC: 3 | RNVC: 2
10674179: RNCC: D | RNVC: 9

5 Dec 2013

5340-20-007-6750
Mounting Plate

200076750
10706573-001: RNCC: 3 | RNVC: 2
10706573: RNCC: D | RNVC: 9

28 May 2013

5340-21-884-0958
Lock Cylinder

218840958
21-002: RNCC: 3 | RNVC: 2
AANDS21-002: RNCC: 3 | RNVC: 2

26 May 1981

5340-20-006-1682
Angle Bracket

200061682
82450045-001: RNCC: 3 | RNVC: 2

16 Mar 2011

5340-21-908-0139
Electrical-Mechanical Equipment Post

219080139
718-601055-001: RNCC: 3 | RNVC: 2

3 Nov 1990

5340-20-006-3614
Mounting Bracket

200063614
83210381-101: RNCC: 3 | RNVC: 2

20 Jun 2011

5340-20-004-4808
Mounting Plate

200044808
0678404-1: RNCC: 3 | RNVC: 2
0678404: RNCC: 5 | RNVC: 1

9 Jan 2009

5340-20-005-1180
Mounting Plate

200051180
B30603-223-1: RNCC: 3 | RNVC: 2

21 Oct 2009

5340-21-914-2666
Access Cover

219142666
UD-96-00152-1: RNCC: 3 | RNVC: 2

23 Jul 1997

5340-20-005-5985
Multiple Angle Bracket

200055985
AC40130-04: RNCC: 3 | RNVC: 2

19 May 2010

5340-20-007-8378
Mounting Bracket

200078378
10686085-011PEG: RNCC: 3 | RNVC: 2
10686085: RNCC: D | RNVC: 9

20 Aug 2013

5340-21-865-9186
Barrel Bolt

218659186
1078-2 1-2: RNCC: 3 | RNVC: 2

14 Apr 1972

5340-21-913-1254
Cane Bolt

219131254
9578124-1: RNCC: 3 | RNVC: 2

22 Sep 1996

5340-20-000-4217
End Ring Connector

200004217
124-016: RNCC: 3 | RNVC: 2
10657120-001: RNCC: 7 | RNVC: 2

25 Sep 2002

5340-20-005-0354
Mounting Plate

200050354
626-354358-000: RNCC: 3 | RNVC: 2

4 Sep 2009

5340-21-875-7814
Blank Panel

218757814
0155-61276-101: RNCC: 3 | RNVC: 2

26 Apr 1977

5340-20-005-5937
Multiple Angle Bracket

200055937
AC40341-01: RNCC: 3 | RNVC: 2

18 May 2010

5340-20-008-2046
Mounting Bracket

200082046
1375025-1: RNCC: 3 | RNVC: 2
1375025: RNCC: D | RNVC: 9

6 Jan 2014

5340-20-004-6785
Snap Hook

200046785
0876535-1: RNCC: 3 | RNVC: 2
0876535: RNCC: 5 | RNVC: 1

12 Mar 2009

5340-21-908-4028
Butt Hinge Leaf

219084028
215-33009-27: RNCC: 3 | RNVC: 2
GR-215-33009-27: RNCC: 5 | RNVC: 2
MS20001P6-7200: RNCC: 6 | RNVC: 9
MS20001PX6-7200: RNCC: 6 | RNVC: 9

8 May 1992

5340-20-003-9348
Plug

200039348
73220032-0: RNCC: 3 | RNVC: 2
0860520: RNCC: D | RNVC: 9

4 Mar 2008

5340-20-006-4182
Mechanical Stop

200064182
10479: RNCC: 3 | RNVC: 2

14 Jul 2011

5340-20-000-4567
Mounting Bracket

200004567
10657014-011PEW: RNCC: 3 | RNVC: 2
10657014: RNCC: D | RNVC: 9

11 Oct 2002

5340-20-006-3249
Mounting Plate

200063249
AC86295-04-01-01: RNCC: 3 | RNVC: 2

1 Jun 2011

5340-20-002-8444
Spring Tension Clip

200028444
25-1922-01-00-05: RNCC: 3 | RNVC: 2

19 Jul 2006

5340-20-001-1571
Mounting Bracket

200011571
10656070-011PEG: RNCC: 3 | RNVC: 2

28 Nov 2003

5340-21-908-0889
Angle Bracket

219080889
8961024-01: RNCC: 3 | RNVC: 2

12 Jul 1991

5340-20-000-8289
Bow Handle

200008289
9382513-1: RNCC: 3 | RNVC: 2
9382513: RNCC: D | RNVC: 9

12 Jun 2003

5340-20-007-5792
Mounting Plate

200075792
B81002-070-1: RNCC: 3 | RNVC: 2

15 Apr 2013

5340-20-001-9246
Butt Hinge

200019246
A20618-096-1: RNCC: 3 | RNVC: 2
098-808: RNCC: 6 | RNVC: 9
A20618-096: RNCC: D | RNVC: 9

4 Mar 2005

5340-20-001-9248
Mounting Plate

200019248
0275751-1: RNCC: 3 | RNVC: 2
0275751: RNCC: D | RNVC: 9

4 Mar 2005

5340-20-004-7063
Adapter Plate Assem

200047063
0778052-2: RNCC: 3 | RNVC: 2
0778052-1: RNCC: 3 | RNVC: 9
0778052: RNCC: 5 | RNVC: 1

27 Mar 2009

5340-21-911-1241
Headless Straight Rod

219111241
ALT-05195-09: RNCC: 3 | RNVC: 2

6 Nov 1993

5340-20-006-0240
Angle Bracket

200060240
0656-034047-03: RNCC: 3 | RNVC: 2

22 Dec 2010

5340-20-005-5844
Multiple Angle Bracket

200055844
AC40120-07: RNCC: 3 | RNVC: 2

18 May 2010

5340-20-000-5438
Mounting Bracket

200005438
1022-1190-03: RNCC: 3 | RNVC: 2

14 Jan 2003

5340-21-799-2733
Butt Hinge

217992733
311-1 1/2 X 72 NH: RNCC: 3 | RNVC: 2
69GPITYPE141: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-005-5959
Multiple Angle Bracket

200055959
AC40341-05: RNCC: 3 | RNVC: 2

18 May 2010

5340-20-003-5097
Mounting Plate

200035097
10664614-001PW: RNCC: 3 | RNVC: 2
10664614: RNCC: 5 | RNVC: 1

6 Aug 2007

5340-20-003-0575
Webbing Strap

200030575
B61000-112-5: RNCC: 3 | RNVC: 2

30 Nov 2006

5340-21-908-0790
Hinged Hasp

219080790
DA05168-01: RNCC: 3 | RNVC: 2

11 May 1991

5340-21-905-5808
Mounting Bracket

219055808
443-83050-1: RNCC: 3 | RNVC: 2

20 Jan 1990

5340-21-912-9770
Support Hook

219129770
10516313: RNCC: 3 | RNVC: 2

11 Jan 1996

5340-21-913-2962
Access Cover

219132962
10555996: RNCC: 3 | RNVC: 2

3 Oct 1996

5340-21-913-2998
Mounting Bracket

219132998
10558108: RNCC: 3 | RNVC: 2

27 Oct 1996

5340-21-913-4860
Spring Retaining Plate

219134860
10607739: RNCC: 3 | RNVC: 2

8 Dec 1996

5340-21-913-6478
Hinge Torsion Bar

219136478
10557891: RNCC: 3 | RNVC: 2

22 Jan 1997

5340-21-913-8906
Mounting Bracket

219138906
10556030: RNCC: 3 | RNVC: 2

9 Apr 1997

5340-21-913-8821
Angle Bracket

219138821
10556731: RNCC: 3 | RNVC: 2

27 Mar 1997

5340-20-008-7638

5340-20-012-5571

5340-20-010-9466

5340-20-005-5878
Mounting Bracket

200055878
AC40316-17: RNCC: 3 | RNVC: 2

18 May 2010

5340-20-007-0271
Manual Control Lever

200070271
10660252-011PG: RNCC: 3 | RNVC: 2

17 Jul 2012

5340-20-007-7094
Mounting Bracket

200077094
720710-001: RNCC: 3 | RNVC: 2

14 Jun 2013

5340-21-863-3516
Loop Clamp

218633516
190-0408: RNCC: 3 | RNVC: 2

16 Dec 1971

5340-20-007-5376
Mounting Bracket

200075376
10680326-001PG: RNCC: 3 | RNVC: 2
10680326-001: RNCC: 5 | RNVC: 9

19 Mar 2013

5340-21-876-2172
Latch

218762172
6617012: RNCC: 3 | RNVC: 2

20 Sep 1977

5340-21-860-5788
Retaining Strap

218605788
192-244: RNCC: 3 | RNVC: 2

15 Oct 1970

5340-21-897-8651
Angle Bracket

218978651
8282079-2: RNCC: 3 | RNVC: 2

14 Feb 1985

5340-21-841-7735
Collar

218417735
107-006-10: RNCC: 3 | RNVC: 2

21 Dec 1965

5340-20-002-4134
Bonding Strap

200024134
130014BS901-12: RNCC: 3 | RNVC: 2

16 Dec 2005

5340-21-660-1818
Retaining Strap

216601818
701EAZHY: RNCC: 3 | RNVC: 2
305-9085: RNCC: 6 | RNVC: 9
460-1770: RNCC: 6 | RNVC: 9

25 May 1968

5340-21-913-0057
Synchro Clamp

219130057
10554126: RNCC: 3 | RNVC: 2

1 Mar 1996

5340-21-914-1611
Azimuth Lock Slide

219141611
10556639: RNCC: 3 | RNVC: 2

18 Jun 1997

5340-21-921-7349
Mounting Bracket

219217349
10625990-PW: RNCC: 3 | RNVC: 2

4 Mar 2002

5340-21-884-0225
Butt Hinge

218840225
821C4-4IN: RNCC: 3 | RNVC: 2

17 Dec 1980

5340-20-003-0587
Mounting Bracket

200030587
C91001-179-1: RNCC: 3 | RNVC: 2

1 Dec 2006

5340-21-908-0931
General Purpose Resilient Mount

219080931
CA-1595: RNCC: 3 | RNVC: 2
507240/14: RNCC: 5 | RNVC: 2

14 Aug 1991

5340-21-877-3452
Plug

218773452
2: RNCC: 3 | RNVC: 2

18 Oct 1977

5340-21-311-9613
Retaining Strap

213119613
14M7: RNCC: 3 | RNVC: 2
14M7: RNCC: 3 | RNVC: 2
14M7: RNCC: 3 | RNVC: 2
J-866: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-841-7817
Bail Handle

218417817
120SV: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-911-8236
Nonmetallic Bumper

219118236
SJ-5023 021200 673924: RNCC: 3 | RNVC: 2

10 Mar 1994

5340-20-003-0525
Lock Bracket

200030525
C91001-548-1: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-21-880-7357
Butt Hinge Leaf

218807357
6-027220-C2: RNCC: 3 | RNVC: 2
219-10016-5: RNCC: 3 | RNVC: 2

11 Sep 1979

5340-21-887-8357
Butt Hinge Leaf

218878357
MS20257HC5-300: RNCC: 3 | RNVC: 2

7 Dec 1981

5340-21-908-3986
Double Angle Bracket

219083986
702-139205-917-0: RNCC: 3 | RNVC: 2

4 Apr 1992

5340-20-002-4175
Manual Control Handle

200024175
10661829-011: RNCC: 3 | RNVC: 2
10661829: RNCC: D | RNVC: 9

19 Dec 2005

5340-21-912-1961
Loop Clamp

219121961
C6CF1273-29: RNCC: 3 | RNVC: 2
5340AA2050570: RNCC: 5 | RNVC: 9

29 Aug 1995

5340-21-913-2955
T Bracket

219132955
10557976: RNCC: 3 | RNVC: 2

22 Sep 1996

5340-21-913-3038
Access Cover

219133038
10607928: RNCC: 3 | RNVC: 2

6 Sep 1996

5340-21-913-6457
Access Cover

219136457
10557379: RNCC: 3 | RNVC: 2

22 Dec 1996

5340-21-913-8896
Mounting Bracket

219138896
10557360: RNCC: 3 | RNVC: 2

28 Mar 1997

5340-21-863-4150
Pipe Bracket

218634150
460-0705: RNCC: 3 | RNVC: 2

18 Nov 1971

5340-20-006-3814
Mounting Bracket

200063814
83231063-101: RNCC: 3 | RNVC: 2

23 Jun 2011

5340-20-003-2120
Adapter Plate

200032120
B30601-234-1: RNCC: 3 | RNVC: 2

16 Feb 2007

5340-20-007-2328
Mounting Plate

200072328
10689907-001: RNCC: 3 | RNVC: 2
10689907: RNCC: D | RNVC: 9

30 Oct 2012

5340-20-007-7345
General Purpose Resilient Mount

200077345
10706316-002: RNCC: 3 | RNVC: 2

27 Jun 2013

5340-20-001-1144
Loop Clamp

200011144
B0305064-03D24EP: RNCC: 3 | RNVC: 2

6 Nov 2003

5340-21-841-7633
Pipe Bracket

218417633
0-0: RNCC: 3 | RNVC: 1

6 Jun 1968

5340-21-908-0819
Angle Bracket

219080819
8860759-1: RNCC: 3 | RNVC: 2

31 May 1991

5340-20-005-6530
Mounting Bracket

200056530
148254-1: RNCC: 3 | RNVC: 2

2 Jun 2010

5340-20-007-2458
Mounting Plate

200072458
143339-1: RNCC: 3 | RNVC: 2

6 Nov 2012

5340-21-660-1386
Rope Cleat

216601386
401: RNCC: 3 | RNVC: 1
401S-10: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-001-3010
Mounting Bracket

200013010
0376145-2: RNCC: 3 | RNVC: 2
0376145: RNCC: D | RNVC: 9

11 Mar 2004

5340-21-914-6137
Mounting Bracket

219146137
10556810: RNCC: 3 | RNVC: 2

9 Jun 1998

5340-21-311-9437
Retaining Strap

213119437
J863-12: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-003-9920
Angle Bracket

200039920
C5CM121181-27: RNCC: 3 | RNVC: 2

28 Mar 2008

5340-21-860-5786
Angle Bracket

218605786
192-119: RNCC: 3 | RNVC: 2

15 Oct 1970

5340-21-865-9996
Expansion Shield

218659996
0512-12000: RNCC: 3 | RNVC: 2
512-12: RNCC: 3 | RNVC: 2
0512-12000: RNCC: 3 | RNVC: 2
512-12: RNCC: 3 | RNVC: 2

19 May 1972

5340-21-901-8215
Mailbag Rack Hook

219018215
200-12-035: RNCC: 3 | RNVC: 2

11 Jul 1986

5340-20-007-0360
Mounting Bracket

200070360
TE70020176-100: RNCC: 3 | RNVC: 2

20 Jul 2012

5340-21-660-1681
Expansion Shield

216601681
01038: RNCC: 3 | RNVC: 2
101-844: RNCC: 3 | RNVC: 2
844: RNCC: 3 | RNVC: 2
101-01038: RNCC: 3 | RNVC: 2
115-0714: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-006-0929
Mounting Bracket

200060929
0656-035474-12: RNCC: 3 | RNVC: 2

4 Feb 2011

5340-20-000-7438
Mounting Plate

200007438
715245-001: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-20-007-0363
Mounting Bracket

200070363
10657830-011PG: RNCC: 3 | RNVC: 2

20 Jul 2012

5340-21-898-4561
Bow Handle

218984561
127882-1: RNCC: 3 | RNVC: 2

24 Jul 1985

5340-21-900-1447
Rod End Clevis

219001447
C3M89-3: RNCC: 3 | RNVC: 2

5 Feb 1986

5340-21-660-0190
Butt Hinge

216600190
814: RNCC: 3 | RNVC: 1
814C4 1 1/4 X 3 1/4: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-920-2224
Runner

219202224
EAST16631: RNCC: 3 | RNVC: 2

7 Jul 1999

5340-21-863-3510
Corner Brace

218633510
999: RNCC: 3 | RNVC: 1
130-3665: RNCC: 6 | RNVC: 9

18 Nov 1971

5340-21-880-7257

5340-20-004-4834
Mounting Plate

200044834
0477324-1: RNCC: 3 | RNVC: 2
0477324: RNCC: 5 | RNVC: 1

12 Jan 2009

5340-21-908-4745
Retaining Strap

219084745
TE10001861-001: RNCC: 3 | RNVC: 2

24 Sep 1992

5340-21-879-5976
Electrical-Mechanical Equipment Post

218795976
232033-001: RNCC: 3 | RNVC: 2

1 May 1979

5340-21-908-0482
Rim Clenching Clamp

219080482
MA-17582: RNCC: 3 | RNVC: 2

9 Jan 1991

5340-21-841-7820
Butt Hinge

218417820
69GP1: RNCC: 2 | RNVC: 1
BB191: RNCC: 3 | RNVC: 1
FBB191 5 X 5: RNCC: 3 | RNVC: 2
FBB191 5 X 5: RNCC: 3 | RNVC: 2
131-5323: RNCC: 6 | RNVC: 9
131-5793: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-001-8067
Mounting Bracket

200018067
B51007-154-1: RNCC: 3 | RNVC: 2
B51007-154: RNCC: D | RNVC: 9

5 Jan 2005

5340-20-007-8609
General Purpose Access Door

200078609
7007-1055-1: RNCC: 3 | RNVC: 2

28 Aug 2013

5340-20-001-6784
Manual Control Handle

200016784
GM3-M6808A: RNCC: 3 | RNVC: 2
GM-M6808A: RNCC: 5 | RNVC: 9

23 Oct 2004

5340-20-006-2278
Access Cover

200062278
24-9626: RNCC: 3 | RNVC: 2

6 Apr 2011

5340-20-003-8526
Bow Handle

200038526
682-5054: RNCC: 3 | RNVC: 2

18 Jan 2008

5340-20-001-6884
Snap Hook

200016884
C50703-210-1: RNCC: 3 | RNVC: 2

28 Oct 2004

5340-20-005-6594
Mounting Bracket

200056594
47396-B: RNCC: 3 | RNVC: 2

7 Jun 2010

5340-20-005-9614
Access Cover

200059614
24-9506: RNCC: 3 | RNVC: 2

3 Dec 2010

5340-21-908-0154
Headless Straight Rod

219080154
A87-1110: RNCC: 3 | RNVC: 2

3 Oct 1990

5340-21-078-8534
Retainer

210788534
9-10C104: RNCC: 3 | RNVC: 2

25 Jul 1966

5340-20-000-1868
Mounting Bracket

200001868
9380349-2: RNCC: 3 | RNVC: 2

4 Jun 2002

5340-21-893-8817
Retaining Strap

218938817
76C05033-1: RNCC: 3 | RNVC: 2

11 Nov 1983

5340-20-007-9870
Mounting Bracket

200079870
1177411-1: RNCC: 3 | RNVC: 2

7 Oct 2013

5340-21-913-8952
Mounting Plate

219138952
9675859-1: RNCC: 3 | RNVC: 2
VD-96-00131-1: RNCC: 3 | RNVC: 2

29 Apr 1997

5340-21-660-1882
Turnbuckle

216601882
304: RNCC: 3 | RNVC: 1
304X1/2-9: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-002-2460
Mounting Bracket

200022460
25-0434: RNCC: 3 | RNVC: 2

8 Sep 2005

5340-20-005-9373
Headless Straight Rod

200059373
TE10017626-001: RNCC: 3 | RNVC: 2

25 Nov 2010

5340-20-005-5995
Shock Panel Mount

200055995
AC40420-20: RNCC: 3 | RNVC: 2

19 May 2010

5340-20-005-0432
Mounting Bracket

200050432
626-354365-000: RNCC: 3 | RNVC: 2

8 Sep 2009

5340-20-000-0165
Webbing Strap

200000165
10638455-240: RNCC: 3 | RNVC: 2

11 Apr 2002

5340-20-000-6935
Dust And Moisture Seal Boot

200006935
68514449973: RNCC: 3 | RNVC: 2

8 Apr 2003

5340-20-004-3170
Swivel Caster

200043170
358: RNCC: 3 | RNVC: 2

29 Sep 2008

5340-20-008-1625
Mounting Bracket

200081625
68620253-6: RNCC: 3 | RNVC: 2

6 Dec 2013

5340-20-007-2320
Manual Control Lever

200072320
SHOXS-WP0026: RNCC: 3 | RNVC: 2

29 Oct 2012

5340-21-912-7544
Angle Bracket

219127544
10558562: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-21-913-3006
Angle Bracket

219133006
10557108: RNCC: 3 | RNVC: 2

8 Feb 1997

5340-21-913-3022
Angle Bracket

219133022
10557964: RNCC: 3 | RNVC: 2

13 Feb 1997

5340-21-913-6536
Mounting Plate

219136536
10513635-PW: RNCC: 3 | RNVC: 2

6 Mar 1997

5340-21-913-8833
Angle Bracket

219138833
10557561: RNCC: 3 | RNVC: 2

2 Apr 1997

5340-21-914-1578
Access Cover

219141578
10555911: RNCC: 3 | RNVC: 2

29 May 1997

5340-21-914-1584
Block Clamp

5340-20-012-0504

5340-20-007-3633
Mounting Bracket

200073633
10696229-021: RNCC: 3 | RNVC: 2
10696229: RNCC: D | RNVC: 9

3 Jan 2013

5340-21-908-0519
Mounting Plate

219080519
SKL-9170: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-20-005-2051
Bumper

200052051
215T28056-8: RNCC: 3 | RNVC: 2

9 Dec 2009

5340-21-914-2665
Mounting Bracket

219142665
UD-96-00151-1: RNCC: 3 | RNVC: 2

23 Jul 1997

5340-21-897-8364
Expansion Shield

218978364
38505-X: RNCC: 3 | RNVC: 2
5/16X2: RNCC: 3 | RNVC: 2

20 Dec 1984

5340-20-006-0340
Arm Assy-Bin Suppor

200060340
82520086-015: RNCC: 3 | RNVC: 2

4 Jan 2011

5340-21-880-7359
Butt Hinge Leaf

218807359
6-027222-C2: RNCC: 3 | RNVC: 2
219-10023-5: RNCC: 3 | RNVC: 2

11 Sep 1979

5340-20-000-5429
Rain Shield

200005429
1022-1410-01: RNCC: 3 | RNVC: 2

14 Jan 2003

5340-20-006-0225
Angle Bracket

200060225
0656-034114-03: RNCC: 3 | RNVC: 2

22 Dec 2010

5340-21-913-8893
Mounting Plate

219138893
10557949: RNCC: 3 | RNVC: 2

28 Mar 1997

5340-21-914-4358
Mounting Plate

219144358
10557283: RNCC: 3 | RNVC: 2

6 Sep 1997

5340-21-921-5749
Double Angle Bracket

219215749
10640416-PW: RNCC: 3 | RNVC: 2

21 Jan 2002

5340-21-913-2999
Mounting Plate

219132999
10607790: RNCC: 3 | RNVC: 2

27 Oct 1996

5340-21-913-6511
Mounting Bracket

219136511
10608172: RNCC: 3 | RNVC: 2

13 Feb 1997

5340-21-913-8829
Webbing Strap

219138829
10555820-40: RNCC: 3 | RNVC: 2

2 Apr 1997

5340-21-914-8110
Lh Bracket Assembly

219148110
10638411: RNCC: 3 | RNVC: 2

26 Sep 1998

5340-21-921-8004
Access Cover

219218004
271038: RNCC: 3 | RNVC: 2

4 Apr 2002

5340-21-914-5356
Hinge Torsion Bar

219145356
10628501: RNCC: 3 | RNVC: 2

17 Oct 1998

5340-21-921-5596
Mounting Bracket

219215596
10625497: RNCC: 3 | RNVC: 2

15 Jan 2002

5340-20-013-0373

5340-20-012-6964

5340-20-012-9789

5340-21-914-2663
Angle Bracket

219142663
1C08337-1: RNCC: 3 | RNVC: 2

11 Jul 1997

5340-21-914-2670
Angle Bracket

219142670
1B08273: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-21-915-0018
Loop Clamp

219150018
10628571: RNCC: 3 | RNVC: 2

27 Feb 1999

5340-21-859-3799
Nonmetallic Bumper

218593799
741280: RNCC: 3 | RNVC: 2
201-000859-23: RNCC: 5 | RNVC: 2

16 Jul 1970

5340-21-897-8639
Double Angle Bracket

218978639
8282053-2: RNCC: 3 | RNVC: 2
323580: RNCC: 5 | RNVC: 9
323580: RNCC: 5 | RNVC: 9

14 Feb 1985

5340-20-000-2402
Mounting Frame Asse

200002402
9378534-1: RNCC: 3 | RNVC: 2

21 Jun 2002

5340-20-002-8379
Short Assembly Pin

200028379
9375125-1: RNCC: 3 | RNVC: 2
9375125: RNCC: 5 | RNVC: 1

17 Jul 2006

5340-20-005-2689
Mounting Plate

200052689
10673374-001PEG: RNCC: 3 | RNVC: 2

21 Jan 2010

5340-21-921-1846
Angle Bracket

219211846
10652913-001PW: RNCC: 3 | RNVC: 2

11 Jun 2001

5340-21-897-8226
Bracket Retaining

218978226
8477332: RNCC: 3 | RNVC: 2
J01-099-0: RNCC: 5 | RNVC: 2

12 Dec 1984

5340-21-914-1619
Turnbuckle

219141619
022-2478-06: RNCC: 3 | RNVC: 2

3 Jul 1997

5340-20-006-3184
Multiple Angle Bracket

200063184
B30603-064-1: RNCC: 3 | RNVC: 2

30 May 2011

5340-21-000-5348
Handwheel

210005348
J600064-143: RNCC: 3 | RNVC: 2

25 May 1968

5340-20-001-7752
Access Cover

200017752
9481425-1: RNCC: 3 | RNVC: 2
9481425: RNCC: D | RNVC: 9

21 Dec 2004

5340-21-849-0648
Handwheel

218490648
D57-00584: RNCC: 3 | RNVC: 2
AX504203-37: RNCC: 5 | RNVC: 2

16 Apr 1970

5340-20-007-6759
Mounting Bracket

200076759
10702657-011PW: RNCC: 3 | RNVC: 2
10702657: RNCC: D | RNVC: 9

28 May 2013

5340-20-005-0389
Mounting Bracket

200050389
568-348483-000: RNCC: 3 | RNVC: 2

4 Sep 2009

5340-20-004-3129
Case Corner

200043129
346: RNCC: 3 | RNVC: 2

25 Sep 2008

5340-21-905-5510
Mounting Bracket

219055510
10511799: RNCC: 3 | RNVC: 2

11 May 1989

5340-20-010-3579

5340-20-012-2615

5340-20-006-6588
Access Cover

200066588
10684441-011PEW: RNCC: 3 | RNVC: 2

5 Jan 2012

5340-20-006-0273
Strip-Retaining

200060273
82550672-101: RNCC: 3 | RNVC: 2

23 Dec 2010

5340-20-000-5049
Mounting Plate

200005049
8478790-1: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-20-003-2148
Adapter Plate

200032148
B30601-176-1: RNCC: 3 | RNVC: 2

19 Feb 2007

5340-21-862-6591
Mortise Latch Set

218626591
29X70231X1719-3-4X040-1-4: RNCC: 3 | RNVC: 1
WH8122X8258EX296: RNCC: 3 | RNVC: 1
4634X1-1613X1-1682: RNCC: 3 | RNVC: 1
29X70231X1719-3-4X040-1-4: RNCC: 3 | RNVC: 1
DU10030X15XF2189: RNCC: 3 | RNVC: 1
132-2334: RNCC: 6 | RNVC: 9

14 Oct 1971

5340-21-912-6790
Turnbuckle

219126790
8762111-1: RNCC: 3 | RNVC: 2

31 Aug 1995

5340-20-007-1266
Mounting Bracket

200071266
MM-7225-0-D/1: RNCC: 3 | RNVC: 2

7 Sep 2012

5340-20-003-7613
Assembly Support

200037613
0078287-1: RNCC: 3 | RNVC: 2
0078287: RNCC: 5 | RNVC: 1

4 Dec 2007

5340-20-003-7608
Angle Bracket

200037608
0078298-1: RNCC: 3 | RNVC: 2
0078298: RNCC: 5 | RNVC: 1

30 Nov 2007

5340-21-891-6612
Electrical-Mechanical Equipment Post

218916612
M5152-67: RNCC: 3 | RNVC: 2
56975.20.5.607-67: RNCC: 5 | RNVC: 2

21 May 1983

5340-20-007-2953
Mounting Plate

200072953
SHOXS-0199: RNCC: 3 | RNVC: 2

29 Nov 2012

5340-21-914-8220
Double Angle Bracket

219148220
524-960027-000: RNCC: 3 | RNVC: 2

8 Jul 1998

5340-21-913-2956
Mounting Plate

219132956
10558105: RNCC: 3 | RNVC: 2

22 Sep 1996

5340-21-913-6477
Rod End Clevis

219136477
726035: RNCC: 3 | RNVC: 2

22 Jan 1997

5340-21-913-6508
Mounting Bracket

219136508
10608171: RNCC: 3 | RNVC: 2

13 Feb 1997

5340-21-913-8930
Mounting Bracket

219138930
10555446-2PW: RNCC: 3 | RNVC: 2

9 Jul 1997

5340-21-914-2660
Access Cover

219142660
10555740: RNCC: 3 | RNVC: 2

10 Jul 1997

5340-21-914-4359
Mounting Plate

219144359
10558081: RNCC: 3 | RNVC: 2

6 Sep 1997

5340-20-000-0464
Multiple Angle Bracket

200000464
10628037-PW: RNCC: 3 | RNVC: 2

16 Apr 2002

5340-20-000-4429
Double Angl Bracket

5340-20-006-2923
Access Door Hinge

200062923
37044-B: RNCC: 3 | RNVC: 2

6 May 2011

5340-21-905-5809
Mounting Bracket

219055809
443-83050-2: RNCC: 3 | RNVC: 2

20 Jan 1990

5340-21-905-5810
Mounting Bracket

219055810
443-83051-1: RNCC: 3 | RNVC: 2

20 Jan 1990

5340-20-010-5387

5340-20-012-4192

5340-20-006-8657
Block Clamp

200068657
10663423-001: RNCC: 3 | RNVC: 2
10663423: RNCC: D | RNVC: 9

25 Apr 2012

5340-20-003-3043
Side Armour Adapter

200033043
B30601-088-1: RNCC: 3 | RNVC: 2

16 Apr 2007

5340-21-891-6735
Clamp

218916735
M4630-28: RNCC: 3 | RNVC: 2
73277-08-5-607M4630-28: RNCC: 5 | RNVC: 2

18 Jun 1983

5340-21-804-5453
Spring Tension Clip

218045453
6002-2C: RNCC: 3 | RNVC: 2
410008-8: RNCC: 5 | RNVC: 2

5 Sep 1963

5340-20-003-2950
Double Angle Bracket

200032950
B30601-275-1: RNCC: 3 | RNVC: 2

5 Apr 2007

5340-21-908-0830
Extension Drawer Slide Section

219080830
8762187-13: RNCC: 3 | RNVC: 2

8 Jun 1991

5340-21-920-5288
Loop Clamp

219205288
086-536: RNCC: 3 | RNVC: 2
10558684: RNCC: 7 | RNVC: 1

22 Feb 2000

5340-21-897-8684
Armor Fro Faceplate

218978684
K510-161: RNCC: 3 | RNVC: 2

15 Feb 1985

5340-21-629-0695

5340-21-712-6825

5340-21-629-0020

5340-21-808-0330
Loop Clamp

218080330
25826-01-6-231: RNCC: 3 | RNVC: 2

7 Mar 1964

5340-21-913-4865
Angle Bracket

219134865
BC-96007-1: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-20-001-1128
Access Cover

200011128
GS219-2700-4: RNCC: 3 | RNVC: 2

6 Nov 2003

5340-21-103-4545

5340-21-913-3411
Mounting Bracket

219133411
10555799: RNCC: 3 | RNVC: 2

28 Jan 1997

5340-21-913-6440
Access Cover

219136440
10607572: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-21-913-6539
Webbing Strap

219136539
10607494: RNCC: 3 | RNVC: 2

7 Mar 1997

5340-20-002-9003
Dust And Moisture Seal Protective Cover

200029003
25 2044 01 00 01: RNCC: 3 | RNVC: 2

28 Aug 2006

5340-20-006-1332
Double Angle Bracket

200061332
446-83030-1: RNCC: 3 | RNVC: 2

22 Feb 2011

5340-21-913-2948
Double Angle Bracket

219132948
10556440: RNCC: 3 | RNVC: 2

22 Sep 1996

5340-21-913-3412
Access Cover

219133412
10557044: RNCC: 3 | RNVC: 2

1 Nov 1996

5340-21-913-3472
Access Cover

219133472
10556447: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-21-913-4855
Webbing Strap

219134855
10555820-15: RNCC: 3 | RNVC: 2

6 Dec 1996

5340-21-913-8799
Angle Bracket

219138799
345-83010-1: RNCC: 3 | RNVC: 2

19 Mar 1997

5340-21-920-5634
Webbing Strap

219205634
10607670-25: RNCC: 3 | RNVC: 2

20 Mar 2000

5340-21-921-3722
Mounting Bracket

219213722
10625340-PG: RNCC: 3 | RNVC: 2

23 Oct 2001

5340-21-921-5594
Mounting Bracket

219215594
10625495: RNCC: 3 | RNVC: 2

15 Jan 2002

5340-21-908-0539
Webbing Strap

219080539
8603-6: RNCC: 3 | RNVC: 2
10552744-6: RNCC: 5 | RNVC: 2
10552744-6: RNCC: 5 | RNVC: 2
10552744-6: RNCC: 5 | RNVC: 2

18 Jan 1991

5340-21-914-1586
Double Angle Bracket

219141586
10511341-PW: RNCC: 3 | RNVC: 2

31 May 1997

5340-21-919-0314
Webbing Strap

219190314
10638455-50: RNCC: 3 | RNVC: 2

7 Jul 1999

5340-21-814-1566
Loop Clamp

218141566
A3047S4-92: RNCC: 3 | RNVC: 2
NAS435S4: RNCC: 5 | RNVC: 2

26 Jun 1964

5340-21-866-9222
Butt Hinge

218669222
7638-26: RNCC: 3 | RNVC: 2

14 Jul 1972

5340-20-004-7916
Block

200047916
10668309-001: RNCC: 3 | RNVC: 2

4 May 2009

5340-20-002-0686
Loop Clamp

200020686
209-31-071: RNCC: 3 | RNVC: 2

27 May 2005

5340-20-007-7340
Mounting Bracket

200077340
10703504-011PEW: RNCC: 3 | RNVC: 2
10703504: RNCC: D | RNVC: 9

27 Jun 2013

5340-20-006-7760
Multiple Angle Bracket

200067760
A548D414-1: RNCC: 3 | RNVC: 2
A548D414-1: RNCC: 5 | RNVC: 2
A548D414: RNCC: 5 | RNVC: 9

7 Mar 2012

5340-20-000-5528
Access Cover

200005528
10658036-011PG: RNCC: 3 | RNVC: 2
10658036: RNCC: D | RNVC: 9

20 Jan 2003

5340-20-007-7281
Angle Bracket

200077281
10705812-001: RNCC: 3 | RNVC: 2
10705812: RNCC: D | RNVC: 9

25 Jun 2013

5340-20-003-2171
Reinforcement Shiel

200032171
B30501-015-1: RNCC: 3 | RNVC: 2
B30501-015-1: RNCC: 5 | RNVC: 1

19 Feb 2007

5340-20-003-3041
Adapter Plate

200033041
B30601-090-1: RNCC: 3 | RNVC: 2

16 Apr 2007

5340-20-003-2977
Armou Adapter Plate

200032977
B30601-117-1: RNCC: 3 | RNVC: 2

11 Apr 2007

5340-20-000-4441
Mounting Bracket

200004441
10656602-011PEW: RNCC: 3 | RNVC: 2
10656602: RNCC: D | RNVC: 9

8 Oct 2002

5340-20-003-8890
Mounting Plate

200038890
10666476-001PG: RNCC: 3 | RNVC: 2

5 Feb 2008

5340-21-849-9532

5340-21-853-6583

5340-21-901-8717
Nonmetallic Bumper

219018717
5414440-11: RNCC: 3 | RNVC: 2

7 Aug 1987

5340-20-000-1542
Mounting Bracket

200001542
10655117-001PEW: RNCC: 3 | RNVC: 2

15 May 2002

5340-21-920-7715
Manual Control Handle

219207715
594-800065-002: RNCC: 3 | RNVC: 2
594-800065-002: RNCC: 5 | RNVC: 9

31 Aug 2000

5340-20-007-4968
Mounting Bracket

200074968
10556457-PG: RNCC: 3 | RNVC: 2
10556457: RNCC: D | RNVC: 9

1 Mar 2013

5340-20-000-4470
Mounting Bracket

200004470
10656481-011PEW: RNCC: 3 | RNVC: 2
10656481: RNCC: D | RNVC: 9

9 Oct 2002

5340-20-001-1147
Loop Clamp

200011147
GM226-1577-1: RNCC: 3 | RNVC: 2

6 Nov 2003

5340-20-012-2870
Installations Guard

5340-21-921-5751
Access Cover

219215751
10652181-011PG: RNCC: 3 | RNVC: 2

21 Jan 2002

5340-21-813-4763

5340-21-813-2974

5340-21-862-6127
Antipilferage Seal

218626127
TYDEN: RNCC: 3 | RNVC: 1
R1: RNCC: 6 | RNVC: 9

15 Jul 1971

5340-21-813-4303

5340-21-905-5567
Latch Plate

219055567
10527411: RNCC: 3 | RNVC: 2

1 Jun 1989

5340-20-006-8518
Rod End Connector

200068518
AC2817: RNCC: 3 | RNVC: 2
MB-M10S: RNCC: 5 | RNVC: 2

19 Apr 2012

5340-21-660-0309
Strap Hinge

216600309
WS1902-12IN: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-905-5873
Butt Hinge Leaf

219055873
TE10000460-001: RNCC: 3 | RNVC: 2

17 Feb 1990

5340-20-001-5036
Access Cover

200015036
GD421-7837-1: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-20-000-0961
Dust And Moisture Seal Protective Plug

200000961
5659-10: RNCC: 3 | RNVC: 1
TM-12-R: RNCC: 3 | RNVC: 2
10608650-1: RNCC: 7 | RNVC: 2

2 May 2002

5340-21-911-8242
Nonmetallic Bumper

219118242
SJ-5312 021200 192173: RNCC: 3 | RNVC: 2

10 Mar 1994

5340-21-891-5189
Dust And Moisture Seal Protective Cap

218915189
H1-66: RNCC: 3 | RNVC: 2

4 Dec 1982

5340-21-905-5740
Padlock Set

219055740
22011/30(75 LOCKS): RNCC: 3 | RNVC: 2
22011/30: RNCC: 5 | RNVC: 1

29 Sep 1989

5340-21-911-8304
Installation Kit

219118304
124311-101: RNCC: 3 | RNVC: 2
933760: RNCC: 6 | RNVC: 9

23 Apr 1994

5340-21-910-8742
Spring Tension Clip

219108742
TE30003950-001: RNCC: 3 | RNVC: 2
TE30003949-001: RNCC: 5 | RNVC: 9

25 Jun 1993

5340-20-006-0734
Mounting Bracket

200060734
825201071-001: RNCC: 3 | RNVC: 2

25 Jan 2011

5340-20-006-9954
Mounting Bracket

200069954
14662: RNCC: 3 | RNVC: 2

4 Jul 2012

5340-20-006-0735
Multiple Angle Bracket

200060735
82510139-003: RNCC: 3 | RNVC: 2

25 Jan 2011

5340-20-002-5691
Sensor Arm Roller

200025691
7403-113-1: RNCC: 3 | RNVC: 2

16 Mar 2006

5340-20-000-2423
Webbing Strap

200002423
10656123-001: RNCC: 3 | RNVC: 2

25 Jun 2002

5340-20-001-1545
Mounting Plate

200011545
10656361-001PEG: RNCC: 3 | RNVC: 2

28 Nov 2003

5340-21-660-1582
Fusible Plug

216601582
7132-3: RNCC: 3 | RNVC: 1
7132-3/4BRZ: RNCC: 3 | RNVC: 2

30 Nov 1965

5340-21-866-4043
Butt Hinge

218664043
821: RNCC: 3 | RNVC: 1
821C4-2.5 BY 2.5: RNCC: 3 | RNVC: 2

19 May 1972

5340-21-629-0010

5340-20-006-5960
Angle Bracket

200065960
B51001-169: RNCC: 3 | RNVC: 2

15 Nov 2011

5340-21-813-6974

5340-21-809-1318

5340-21-809-1394

5340-20-006-0970
Brkt Wiring Harness

200060970
0656-035834-16: RNCC: 3 | RNVC: 2

7 Feb 2011

5340-20-005-2830
Bow Handle

200052830
0656-039971-10: RNCC: 3 | RNVC: 2

29 Jan 2010

5340-20-008-1456
Access Door Hinge

200081456
10709119-011PEG: RNCC: 3 | RNVC: 2
10709119: RNCC: D | RNVC: 9

28 Nov 2013

5340-20-007-7084
Mounting Bracket

200077084
720706-001: RNCC: 3 | RNVC: 2

14 Jun 2013

5340-20-007-7344
General Purpose Resilient Mount

200077344
10706316-001: RNCC: 3 | RNVC: 2

27 Jun 2013

5340-21-859-2725
Mortise Lock Set

218592725
830-7051C26D: RNCC: 3 | RNVC: 2

16 Jul 1970

5340-20-006-7623
Dust And Moisture Seal Protective Cap

200067623
510346-21: RNCC: 3 | RNVC: 2

28 Feb 2012

5340-20-004-9817
Stand Base

200049817
WSWBGS: RNCC: 3 | RNVC: 2

28 Jul 2009

5340-20-004-0357
Mount Assembly

200040357
9877895-1: RNCC: 3 | RNVC: 2

14 Apr 2008

5340-21-920-2307
Shift Arm

219202307
AED 69505-4: RNCC: 3 | RNVC: 2
AED 69505-4: RNCC: 5 | RNVC: 9

14 Jul 1999

5340-20-005-4309
Webbing Strap

200054309
ACS-500-010: RNCC: 3 | RNVC: 2

9 Apr 2010

5340-21-910-8746
Strap Hinge

219108746
TE10003946-003: RNCC: 3 | RNVC: 2

25 Jun 1993

5340-21-891-6397
Lever And Pin Assem

218916397
K110-511: RNCC: 3 | RNVC: 2

9 Apr 1983

5340-20-003-9709
Mounting Bracket

200039709
10668517-001: RNCC: 3 | RNVC: 2

18 Mar 2008

5340-20-003-5167
Mounting Bracket

200035167
10661435-011PW: RNCC: 3 | RNVC: 2
10661435: RNCC: 5 | RNVC: 1

9 Aug 2007

5340-21-898-4256
Rod End Clevis

218984256
255-028: RNCC: 3 | RNVC: 2
AY-28: RNCC: 5 | RNVC: 2

26 Apr 1985

5340-20-007-3870
Mechanical Stop

200073870
10695042-001PG: RNCC: 3 | RNVC: 2
10695042: RNCC: D | RNVC: 9

14 Jan 2013

5340-21-900-1564
Rod End Clevis

219001564
0190-60243-111: RNCC: 3 | RNVC: 2

13 Feb 1986

5340-20-007-7763
Access Cover

200077763
10687671: RNCC: 1 | RNVC: 2
GD10687671: RNCC: 3 | RNVC: 2
10687671-011: RNCC: 5 | RNVC: 2

17 Jul 2013

5340-21-864-1788
Plug Button

218641788
100-046S32A2: RNCC: 3 | RNVC: 2

16 Dec 1971

5340-20-003-5484
Mounting Bracket

200035484
10660934-011PW: RNCC: 3 | RNVC: 2
10660934: RNCC: 5 | RNVC: 1

27 Aug 2007

5340-21-865-1568
Bail Handle

218651568
ZSP3-003: RNCC: 3 | RNVC: 2

17 Feb 1972

5340-21-870-9978
Engine Cowl Bracket

218709978
S36-2LH: RNCC: 3 | RNVC: 2

24 Nov 1976

5340-20-002-2691
Dust And Moisture Seal Boot

200022691
87130-14: RNCC: 3 | RNVC: 2

21 Sep 2005

5340-21-913-8810
Block Clamp

219138810
215-75072: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-21-908-0567
Mounting Bracket

219080567
03053943: RNCC: 3 | RNVC: 2

29 Jan 1991

5340-21-898-4644
Door Arm

218984644
220RH: RNCC: 3 | RNVC: 2

14 Aug 1985

5340-21-896-2210
Insert

218962210
A043329: RNCC: 3 | RNVC: 2

3 Jun 1984

5340-20-001-7038
Manual Control Lever

200017038
10640421: RNCC: 3 | RNVC: 2

9 Nov 2004

5340-20-005-2810
Mounting Bracket

200052810
MA51561012229: RNCC: 3 | RNVC: 2

28 Jan 2010

5340-20-005-4050
Insep Assy Bracket

200054050
10680000-011PW: RNCC: 3 | RNVC: 2

23 Mar 2010

5340-21-866-4186
Hinged Hasp

218664186
5369: RNCC: 3 | RNVC: 1
D75-29: RNCC: 3 | RNVC: 2
200-10-265: RNCC: 6 | RNVC: 9

19 May 1972

5340-21-865-9229

5340-21-866-9847

5340-21-870-9404

5340-21-660-0323
Tee Hinge

216600323
904RBP: RNCC: 3 | RNVC: 1
904RBP-6: RNCC: 3 | RNVC: 2
904C2HBP-6: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-852-5865
Rod End Clevis

218525865
AN161-61LL: RNCC: 2 | RNVC: 2

1 Dec 1968

5340-21-864-6988
Corrosion Preventive Anode

218646988
LL26: RNCC: 3 | RNVC: 2

16 Aug 1973

5340-21-921-2378
Retaining Strap

219212378
0078501-1: RNCC: 3 | RNVC: 2

17 Jul 2001

5340-21-913-0109
Access Cover

219130109
RD-3-4879-0: RNCC: 3 | RNVC: 2

13 Mar 1996

5340-20-007-6771
Access Cover

200076771
10692804-011: RNCC: 3 | RNVC: 2
10692804: RNCC: D | RNVC: 9

28 May 2013

5340-21-882-4170
Vent Plug

218824170
SK127294-1: RNCC: 3 | RNVC: 2

3 Jul 1980

5340-21-866-9711

5340-21-864-1134

5340-20-001-1548
Mounting Bracket

200011548
10655374-011PEW: RNCC: 3 | RNVC: 2

28 Nov 2003

5340-20-000-0151
Mounting Plate

200000151
1065610-001PG: RNCC: 3 | RNVC: 2

11 Apr 2002

5340-20-003-0642
Mounting Bracket

200030642
C91001-300-2: RNCC: 3 | RNVC: 2

5 Dec 2006

5340-20-000-1532
Mounting Bracket

200001532
10655468-001PW: RNCC: 3 | RNVC: 2

15 May 2002

5340-20-000-4617
Mounting Bracket

200004617
10657210-011PEW: RNCC: 3 | RNVC: 2
10657210: RNCC: D | RNVC: 9

15 Oct 2002

5340-20-006-8419
Mounting Bracket

200068419
10684289-001PEW: RNCC: 3 | RNVC: 2

12 Apr 2012

5340-20-005-9379
Bumper

200059379
TE10017634-001: RNCC: 3 | RNVC: 2

25 Nov 2010

5340-21-311-8738
Loop Clamp

213118738
HP32N: RNCC: 3 | RNVC: 2
C80118-32: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-901-8744
Caster Wheel

219018744
4-4-35-9: RNCC: 3 | RNVC: 2

29 Oct 1987

5340-21-660-1511
Picture Hanger

216601511
BL50-3: RNCC: 3 | RNVC: 2
BL30715: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-884-0386
General Purpose Resilient Mount

218840386
6094650-5: RNCC: 3 | RNVC: 2
6094650-5: RNCC: 3 | RNVC: 2

6 Jan 1981

5340-21-911-9545
Manual Control Handle

219119545
9279776-2: RNCC: 3 | RNVC: 2

28 Sep 1994

5340-20-005-3918
Mounting Bracket

200053918
0976043-1: RNCC: 3 | RNVC: 2

16 Mar 2010

5340-21-920-8300
Sleeve Insulating

219208300
9378703-1: RNCC: 3 | RNVC: 2

6 Oct 2000

5340-20-001-2587
Rod

200012587
500-623-21: RNCC: 3 | RNVC: 2

3 Feb 2004

Load More Results