What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

Hardware, Commercial - Canada (CA)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Canada (CA) - NCB is 20 or 21

Page 56 of 64

NSN Format for Hardware, Commercial
Codified by Canada

53	40	21	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Canada (CA)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 190 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 63 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 26 Items
What is a Rod End Connector? 44 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 69 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 226 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 94 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 20 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 582 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 43 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 202 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 65 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Shelf Bracket? 33 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Door Hook And Eye? 22 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 77 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 12 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 23 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 23 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 44 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 13 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is a Friction Catch? 38 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 15 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 39 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 26 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 86 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 20 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 42 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 91 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 57 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 25 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 163 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 101 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 21 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 16 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 288 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 52 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 23 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 131 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 24 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 41 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 70 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 45 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 210 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 163 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 82 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 44 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 38 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 25 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 20 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 42 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 18 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Glazier Point? 10 Items: A Glazier Point (POINT,GLAZIER) is a piece of thin sheet metal, triangular or diamond shaped, designed to hold a pane of glass in a wooden sash.
What is an Angle Bracket? 1105 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 81 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 32 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1130 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 20 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 49 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 37 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Quick Release Plunger? 13 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 114 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flush Catch? 97 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 13 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 86 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 115 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 177 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 24 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 53 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 219 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 40 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 494 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 353 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 55 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 51 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 12 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 601 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 32 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 39 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 34 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 41 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 21 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping? 19 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 93 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 117 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 31 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 45 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 19 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 832 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 35 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 40 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 75 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 106 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Picture Hanger? 10 Items: A Picture Hanger (HANGER,PICTURE) is a hook like device that is secured to walls, bulkheads, columns and the like, by means of a nail, screw, magnet or adhesive backed cloth, that is included with and/or attached to the hook. It is designed to hold and suspend variuos items such as photographs, paintings, maps, documents, etc.
What is a Protection Bellows? 16 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 57 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 49 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 2535 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 19 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 16 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 1222 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 48 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 64 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Threaded Hinged Standoff? 11 Items: A Threaded Hinged Standoff (STANDOFF,HINGED,THREADED) is a standoff, internally and/or externally, threaded on both ends with a hinge or pivot point to allow for independent movement of the ends.
What is a Spacing Threaded Standoff? 178 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 115 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a Crank Handle? 13 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 29 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Mechanic Equipment Hardware Kit? 87 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Dust And Moisture Seal Protective Cover? 38 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 51 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 308 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 41 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 39 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 178 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 27 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 80 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 86 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 56 of 64

5340-20-002-4217
Mounting Bracket

200024217
130014DE363-1: RNCC: 3 | RNVC: 2

20 Dec 2005

5340-20-007-7244
Retaining Strap

200077244
10707118-001: RNCC: 1 | RNVC: 2
G2818-001: RNCC: 3 | RNVC: 2

25 Jun 2013

5340-21-905-5876
Butt Hinge Leaf

219055876
TE10000461-001: RNCC: 3 | RNVC: 2

17 Feb 1990

5340-20-001-0551
Mounting Bracket

200010551
FP253194-01: RNCC: 3 | RNVC: 2
FP253194: RNCC: 6 | RNVC: 9

25 Sep 2003

5340-21-920-1245
Clamp.

219201245
9228245: RNCC: 3 | RNVC: 2
9228245-1: RNCC: 5 | RNVC: 2

14 May 1999

5340-21-847-3486
Electrical-Mechanical Equipment Post

218473486
103221: RNCC: 3 | RNVC: 2

16 Aug 1967

5340-21-908-5146
Mounting Plate

219085146
9281746: RNCC: 3 | RNVC: 2

10 Feb 1993

5340-21-901-8235
Rubber Cap

219018235
207566: RNCC: 3 | RNVC: 2

18 Jul 1986

5340-21-868-9080
Nonmetallic Bumper

218689080
F20-2: RNCC: 3 | RNVC: 2
5340-5186: RNCC: 6 | RNVC: 9

31 Dec 1973

5340-21-841-8576
Pipe Bracket

218418576
460-7309: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-920-0465
End Locking Tab

219200465
10616718: RNCC: 3 | RNVC: 2

24 Mar 1999

5340-20-005-9080
Mounting Plate

200059080
10681432-001PG: RNCC: 3 | RNVC: 2

9 Nov 2010

5340-20-007-5873
Mounting Bracket

200075873
10709266-001PEW: RNCC: 3 | RNVC: 2
10709266: RNCC: D | RNVC: 9

18 Apr 2013

5340-21-901-8392
Turnbuckle

219018392
G-228-1X 18: RNCC: 3 | RNVC: 2
HG228-1X 18: RNCC: 3 | RNVC: 2
10-32830: RNCC: 3 | RNVC: 2
45350-40: RNCC: 3 | RNVC: 2

23 Dec 1986

5340-20-007-0002
Bow Handle

200070002
7761011: RNCC: 3 | RNVC: 2

5 Jul 2012

5340-20-000-5529
Mounting Bracket

200005529
10618734: RNCC: 3 | RNVC: 2

20 Jan 2003

5340-21-914-2620
Rod End Clevis

219142620
N3847120GQ: RNCC: 3 | RNVC: 2

10 Jul 1997

5340-21-908-0705
Filler Opening Cap

219080705
457-826-2-1: RNCC: 3 | RNVC: 2
MIL-C-38373B: RNCC: 4 | RNVC: 1

25 Apr 1991

5340-20-005-1087
Angle Bracket

200051087
B30603-207-1: RNCC: 3 | RNVC: 2

16 Oct 2009

5340-21-914-8239
Crank Handle

219148239
1205-1031-1: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-20-003-4812
Mounting Bracket

200034812
10663746-001PW: RNCC: 3 | RNVC: 2
10663745: RNCC: 5 | RNVC: 1

25 Jul 2007

5340-20-003-9041
Dust And Moisture Seal Protective Cap

200039041
317-004: RNCC: 3 | RNVC: 2

13 Feb 2008

5340-21-921-0046
Cover Assembly.

219210046
3116568-01: RNCC: 3 | RNVC: 2

23 Jan 2001

5340-21-910-8620
Access Cover

219108620
10-03827-99: RNCC: 3 | RNVC: 2

15 Jun 1993

5340-21-920-1034
Mounting Plate

219201034
10617618: RNCC: 3 | RNVC: 2

6 May 1999

5340-21-897-8316
Rim Latch

218978316
8477659-1: RNCC: 3 | RNVC: 2
J51-046-0: RNCC: 5 | RNVC: 9

20 Dec 1984

5340-20-005-1303
Mounting Plate

200051303
B30603-239-1: RNCC: 3 | RNVC: 2

28 Oct 2009

5340-21-865-1917

5340-20-003-4703
Mounting Plate

200034703
615-21119-13: RNCC: 3 | RNVC: 2

19 Jul 2007

5340-20-008-1810
Mounting Bracket

200081810
10683031-001PEG: RNCC: 3 | RNVC: 2
10683031: RNCC: D | RNVC: 9

18 Dec 2013

5340-20-002-6057
Angle Bracket

200026057
3106988-01: RNCC: 3 | RNVC: 2

3 Apr 2006

5340-20-003-3002
Armour Adapter

200033002
B30601-092-1: RNCC: 3 | RNVC: 2

12 Apr 2007

5340-21-914-2751
Double Angle Bracket

219142751
WW358323: RNCC: 3 | RNVC: 2
59.32.062.A: RNCC: 5 | RNVC: 2

11 Jul 1997

5340-21-921-5027
Angle Bracket

219215027
A538C418-1: RNCC: 3 | RNVC: 2

13 Dec 2001

5340-21-907-1110
Mounting Bracket

219071110
CF 808 656 AE: RNCC: 3 | RNVC: 2

9 May 1990

5340-21-908-3558
Angle Bracket

219083558
CF346589A: RNCC: 3 | RNVC: 2

13 Dec 1991

5340-21-908-3277
Expansion Plug

219083277
900 03 98 9725: RNCC: 3 | RNVC: 2

12 Sep 1991

5340-20-007-2992
Mounting Bracket

200072992
TE20021138-100: RNCC: 3 | RNVC: 2

3 Dec 2012

5340-21-860-5930
Turnbuckle Body

218605930
820-116-1: RNCC: 3 | RNVC: 2
820-100-115: RNCC: 5 | RNVC: 2

15 Oct 1970

5340-20-000-9799
Access Cover

200009799
200H-0235-0: RNCC: 3 | RNVC: 2

22 Aug 2003

5340-20-000-5786
Angle Bracket

200005786
A22200-0046-2: RNCC: 3 | RNVC: 2
A22200-0046: RNCC: D | RNVC: 9

19 Feb 2003

5340-20-007-9226
Mounting Bracket

200079226
10689128-001PEW: RNCC: 3 | RNVC: 2
10689128: RNCC: D | RNVC: 9

16 Sep 2013

5340-21-868-9229
Caster Axle

218689229
1254-35: RNCC: 3 | RNVC: 2
5340-5264: RNCC: 6 | RNVC: 9

10 Apr 1974

5340-20-001-0646
Angle Bracket

200010646
10657166-001PW: RNCC: 3 | RNVC: 2

8 Oct 2003

5340-20-006-8653
Mounting Bracket

200068653
10652616-011PEW: RNCC: 3 | RNVC: 2

25 Apr 2012

5340-21-912-3222
Swivel Caster

219123222
R2065-1: RNCC: 3 | RNVC: 2

18 Feb 1995

5340-21-920-1234
Bre Bracket Support

219201234
9376340-1: RNCC: 3 | RNVC: 2

14 May 1999

5340-21-660-0218
Butt Hinge

216600218
241: RNCC: 3 | RNVC: 1
241F: RNCC: 3 | RNVC: 1
1041F: RNCC: 3 | RNVC: 1
241C4 2 X 2: RNCC: 3 | RNVC: 2
241C4 2 X 2: RNCC: 3 | RNVC: 2
131-5622: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-005-0916
Angle Bracket

200050916
AC16013-02-02: RNCC: 3 | RNVC: 2

5 Oct 2009

5340-20-003-2241
Mounting Bracket

200032241
A20618-178-1: RNCC: 3 | RNVC: 2
A20618-178-1: RNCC: 6 | RNVC: 9

21 Feb 2007

5340-21-866-9053
Bail Handle

218669053
1205-3-1-2C2G: RNCC: 3 | RNVC: 2
1205-3-1-2: RNCC: 3 | RNVC: 2

16 Jun 1972

5340-21-848-2168
Loop Clamp

218482168
684-3-11-10: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-100-5750
Spring Tension Clip

211005750
CS61A014: RNCC: 3 | RNVC: 2
1005750: RNCC: 6 | RNVC: 9

18 Feb 1971

5340-21-921-4155
Mounting Bracket

219214155
10651489-PG: RNCC: 3 | RNVC: 2

6 Nov 2001

5340-20-006-4694
Loop Clamp

200064694
8700110476: RNCC: 3 | RNVC: 2

18 Aug 2011

5340-21-890-4645

5340-21-880-7899

5340-21-921-5265
Angle Bracket

219215265
B61000-227-1: RNCC: 3 | RNVC: 2

2 Jan 2002

5340-21-102-7452
Coat And Hat Hook

211027452
1461: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-866-9337
Loop Clamp

218669337
C955PC: RNCC: 3 | RNVC: 2

14 Jul 1972

5340-20-011-5892

5340-20-009-8047

5340-20-012-2610

5340-20-005-9072
Loop Clamp

200059072
10681431-011: RNCC: 3 | RNVC: 2

8 Nov 2010

5340-21-848-3716
Barrel Bolt

218483716
1084J: RNCC: 3 | RNVC: 1
1084C1B-4: RNCC: 3 | RNVC: 2
1084J-4: RNCC: 3 | RNVC: 2
69GP6: RNCC: 4 | RNVC: 1

6 Jun 1968

5340-21-908-4541
Dust And Moisture Seal Protective Cap

219084541
2538301: RNCC: 3 | RNVC: 2

26 Jul 1992

5340-21-660-0107
Butt Hinge

216600107
5150: RNCC: 3 | RNVC: 2

25 May 1968

5340-21-660-0181
Butt Hinge

216600181
814: RNCC: 3 | RNVC: 1
814 1/2-1 X 2 7/8: RNCC: 3 | RNVC: 2
131-7806: RNCC: 5 | RNVC: 9

6 Jun 1968

5340-20-001-4727
Tapped. Pad

200014727
10551965-1: RNCC: 3 | RNVC: 2

3 Jun 2004

5340-21-914-8234
Mounting Bracket

219148234
1237-211-1: RNCC: 3 | RNVC: 2

28 Jul 1998

5340-20-002-3795
Mounting Plate

200023795
B22300-18-1: RNCC: 3 | RNVC: 2
B22300-18: RNCC: D | RNVC: 9

5 Dec 2005

5340-21-908-0053
Extension Drawer Slide

219080053
120QD-18-17-R: RNCC: 5 | RNVC: 2

5 Jul 1990

5340-20-001-7504
Access Cover

200017504
10660265-001PW: RNCC: 1 | RNVC: 2
S-2986-2253: RNCC: 3 | RNVC: 2

9 Dec 2004

5340-21-660-1741
Pipe Bracket

216601741
GF9X02-0020002-01: RNCC: 3 | RNVC: 1
9900SHSK384: RNCC: 3 | RNVC: 2
FSA785-6: RNCC: 3 | RNVC: 2

30 Nov 1965

5340-20-003-7543
General Purpose Access Door

200037543
0078331-1: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-21-111-0038

5340-21-878-0908
General Purpose Resilient Mount

218780908
748014001: RNCC: 3 | RNVC: 2
748014001: RNCC: 5 | RNVC: 2

5 Apr 1978

5340-20-007-4437
Access Cover

200074437
9800K309-01: RNCC: 3 | RNVC: 2

6 Feb 2013

5340-21-914-2614
Angle Bracket

219142614
WW458527: RNCC: 3 | RNVC: 2
59.27.065.A: RNCC: 5 | RNVC: 2

28 Jun 1997

5340-20-000-2312
Mounting Bracket

200002312
9378984-1: RNCC: 3 | RNVC: 2

19 Jun 2002

5340-20-008-1735
Mending Plate

200081735
80980049-2: RNCC: 3 | RNVC: 2

11 Dec 2013

5340-20-007-6616
Mounting Bracket

200076616
10707940-011PEG: RNCC: 3 | RNVC: 2
10707940: RNCC: D | RNVC: 9

23 May 2013

5340-20-000-8572
Modified Handle

200008572
C20600-092-1: RNCC: 3 | RNVC: 2
C20600-092: RNCC: D | RNVC: 9

25 Jun 2003

5340-21-908-3327
Handle Assembly

219083327
1044-081: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-20-007-4588
Mounting Bracket

200074588
0078217: RNCC: 3 | RNVC: 2

11 Feb 2013

5340-21-911-1246
Mounting Plate

219111246
391-03317-01: RNCC: 3 | RNVC: 2

20 Nov 1993

5340-21-660-1190
Screw Hook

216601190
5740: RNCC: 3 | RNVC: 2
131-8909: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-000-4646
Webbing Strap

200004646
10607195-1: RNCC: 3 | RNVC: 2
10607195: RNCC: D | RNVC: 9

16 Oct 2002

5340-21-911-1381
Mounting Bracket

219111381
8104-21: RNCC: 3 | RNVC: 2

10 Dec 1993

5340-21-897-1996
Extension Drawer Slide

218971996
204-LR: RNCC: 3 | RNVC: 2
C204-28-6R: RNCC: 3 | RNVC: 2

25 Nov 1984

5340-21-878-0706
Loop Clamp

218780706
32585-5: RNCC: 3 | RNVC: 2

14 Mar 1978

5340-21-890-4650
Spring Tension Clip

218904650
00: RNCC: 3 | RNVC: 2

18 Oct 1982

5340-21-905-5859
Pad Eye

219055859
CF 342 445 A: RNCC: 3 | RNVC: 2

10 Feb 1990

5340-21-920-3862
Pres Adaptor Plate

219203862
9383395-1: RNCC: 3 | RNVC: 2

2 Nov 1999

5340-20-005-4216
Mounting Bracket

200054216
543357-1: RNCC: 3 | RNVC: 2

1 Apr 2010

5340-21-109-4939
Webbing Strap

211094939
3005060: RNCC: 3 | RNVC: 2
3001496: RNCC: 5 | RNVC: 1

6 Jun 1968

5340-20-007-6761
Mounting Bracket

200076761
10702658-011PW: RNCC: 3 | RNVC: 2
10702658: RNCC: D | RNVC: 9

28 May 2013

5340-20-003-5074
Protection Plate

200035074
B81002-328-1: RNCC: 3 | RNVC: 2

2 Aug 2007

5340-21-911-9169
Swivel Caster

219119169
50505-50005: RNCC: 3 | RNVC: 2

20 Jul 1994

5340-21-913-8869
Mounting Plate

219138869
9575904-1: RNCC: 3 | RNVC: 2

18 Mar 1997

5340-21-860-5804
Flush Lock

218605804
699: RNCC: 3 | RNVC: 2

15 Oct 1970

5340-21-816-8864

5340-21-817-2019

5340-21-817-0893

5340-20-006-1794
Mounting Bracket

200061794
87170008-103: RNCC: 3 | RNVC: 2

17 Mar 2011

5340-20-000-8796
Dust And Moisture Seal Protective Plug

200008796
TM-12-B: RNCC: 3 | RNVC: 2
5659-10: RNCC: 6 | RNVC: 9
10608650-13: RNCC: 7 | RNVC: 2

8 Jul 2003

5340-20-008-1044
Mounting Bracket

200081044
0677904-1: RNCC: 3 | RNVC: 2

15 Nov 2013

5340-21-862-6390
Expansion Shield

218626390
8025-00300: RNCC: 3 | RNVC: 2
8025-3: RNCC: 3 | RNVC: 2
EX-8025-3: RNCC: 5 | RNVC: 2

16 Sep 1971

5340-20-006-2048
Handwheel

200062048
NO PRIMARY REF 20-006-2048: RNCC: 3 | RNVC: 2
MVHW0002: RNCC: 5 | RNVC: 2

29 Mar 2011

5340-21-660-0127
Butt Hinge

216600127
1317: RNCC: 3 | RNVC: 1
1317 1 X 1: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-920-0291
Tr Bracket Assembly

219200291
10607354: RNCC: 3 | RNVC: 2

13 Mar 1999

5340-20-006-0660
Mounting Plate

200060660
1SI0176T960: RNCC: 3 | RNVC: 2

21 Jan 2011

5340-21-905-5434

5340-20-006-4075
Manual Control Lever

200064075
1003403: RNCC: 3 | RNVC: 2
1003403: RNCC: 3 | RNVC: 9

8 Jul 2011

5340-21-863-3502
Shelf Bracket

218633502
796Z: RNCC: 3 | RNVC: 1
796C1B3X4: RNCC: 3 | RNVC: 2
796Z-3 X 4: RNCC: 3 | RNVC: 2
796Z-3 X 4: RNCC: 3 | RNVC: 2
130-3773: RNCC: 6 | RNVC: 9

18 Nov 1971

5340-21-920-0467
Locking Tab And Piv

219200467
10616727: RNCC: 3 | RNVC: 2

24 Mar 1999

5340-21-660-1345
Swivel Caster

216601345
7628: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-870-9064
Angle Bracket

218709064
S6125-50174-1: RNCC: 3 | RNVC: 2

29 Apr 1975

5340-21-912-0982
Electrical-Mechanical Equipment Post

219120982
M1033914: RNCC: 3 | RNVC: 2
2401-0339.14: RNCC: 3 | RNVC: 2

9 Aug 1994

5340-21-660-2352
Key Blank

216602352
57: RNCC: 3 | RNVC: 2
R1001EF: RNCC: 3 | RNVC: 2
R01EF: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-001-5006
Contin Footman Loop

200015006
10552526-20: RNCC: 3 | RNVC: 2
10552526: RNCC: D | RNVC: 9

23 Jun 2004

5340-20-002-8328
Bracket (Nvis)

200028328
318-800087-11: RNCC: 3 | RNVC: 2

14 Jul 2006

5340-20-000-8973
Angle Bracket

200008973
10657052-001PW: RNCC: 3 | RNVC: 2
10657052-001: RNCC: D | RNVC: 9

17 Jul 2003

5340-20-000-8422
Webbing Strap

200008422
0176590-004: RNCC: 1 | RNVC: 2
S-60: RNCC: 3 | RNVC: 2

17 Jun 2003

5340-20-007-6247
Lever Bracket

200076247
10694890-011PG: RNCC: 3 | RNVC: 2
10694890: RNCC: D | RNVC: 9

1 May 2013

5340-20-000-5725
Mounting Bracket

200005725
10640449-PG: RNCC: 3 | RNVC: 2
10640449: RNCC: D | RNVC: 9

12 Feb 2003

5340-21-629-0024

5340-21-629-0033

5340-21-884-0274
Bow Handle

218840274
SP80: RNCC: 3 | RNVC: 2

24 Dec 1980

5340-21-908-0025
Bow Handle

219080025
682.77.12: RNCC: 3 | RNVC: 2
682 77 0012: RNCC: 3 | RNVC: 2
682 77 0012: RNCC: 5 | RNVC: 2

19 May 1990

5340-20-006-1634
Mounting Bracket

200061634
10693763-001PW: RNCC: 3 | RNVC: 2

15 Mar 2011

5340-21-102-7580
Nonelectrical Wire

211027580
QQ-W-461: RNCC: 3 | RNVC: 2
MS20995F32: RNCC: 5 | RNVC: 2

6 Jun 1968

5340-20-000-3577
Catch Strike

200003577
10656739-011PW: RNCC: 3 | RNVC: 2

22 Aug 2002

5340-21-913-1321
Mounting Plate

219131321
M0190-60393: RNCC: 3 | RNVC: 2

12 May 1996

5340-20-005-9082
Moving Lock Plate

200059082
51-10-042: RNCC: 3 | RNVC: 2

9 Nov 2010

5340-21-109-4708

5340-21-109-0940

5340-20-003-1600
Butt Hinge

200031600
CH-6: RNCC: 3 | RNVC: 2
10656021-001PW: RNCC: 7 | RNVC: 2

17 Jan 2007

5340-20-007-8606
Mounting Bracket

200078606
7007-1074-1: RNCC: 3 | RNVC: 2

28 Aug 2013

5340-20-007-3918
Mounting Bracket

200073918
10709921-001PEW: RNCC: 3 | RNVC: 2
10709921: RNCC: D | RNVC: 9

14 Jan 2013

5340-21-896-9544
Doo Strike Assembly

218969544
53061: RNCC: 3 | RNVC: 2

9 Sep 1984

5340-21-102-7581
Antipilferage Seal

211027581
PR0NGL0K4: RNCC: 3 | RNVC: 2
PR1035-BN/C: RNCC: 3 | RNVC: 2
PRONGLOK4-BN/C: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-004-5758
Mounting Bracket

200045758
301010-001: RNCC: 3 | RNVC: 2

16 Feb 2009

5340-21-877-3459
Mortise Lock Set

218773459
C51PDLESSC0RE: RNCC: 3 | RNVC: 2

18 Oct 1977

5340-20-003-4811
Mounting Bracket

200034811
10663779-011PW: RNCC: 3 | RNVC: 2
10663779: RNCC: 5 | RNVC: 1

25 Jul 2007

5340-21-884-0023
Angle Bracket

218840023
C4B175146B: RNCC: 3 | RNVC: 2

13 Nov 1980

5340-21-107-4393
Spring Tension Clip

211074393
414595: RNCC: 3 | RNVC: 2
7951295: RNCC: 5 | RNVC: 2

6 Jun 1968

5340-21-906-5776
Launch S Rear Cover

219065776
10-03947-01: RNCC: 3 | RNVC: 2

12 Nov 1988

5340-21-311-9546
Retaining Band

213119546
J-800-18: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-004-2314
Mechanical Stop

200042314
10669659-011: RNCC: 3 | RNVC: 2
10669659: RNCC: 5 | RNVC: 1

30 Jul 2008

5340-20-000-5715
Angle Bracket

200005715
10628505-PG: RNCC: 3 | RNVC: 2
10628505: RNCC: D | RNVC: 9

12 Feb 2003

5340-20-007-8582
Mounting Bracket

200078582
7007-1067: RNCC: 3 | RNVC: 2

28 Aug 2013

5340-21-888-1651
Nonmetallic Bumper

218881651
120-5579: RNCC: 3 | RNVC: 2

21 Feb 1982

5340-21-905-5242
Rod End Clevis

219055242
WL400136B: RNCC: 3 | RNVC: 2

22 Oct 1988

5340-21-915-0129
Mounting Bracket

219150129
38874-2-D/1: RNCC: 3 | RNVC: 2

11 Mar 1999

5340-21-116-2822
Spring Tension Clip

211162822
5-1300: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-815-4416
Spring Tension Clip

218154416
49284: RNCC: 3 | RNVC: 2

14 Jul 1964

5340-21-870-9299
Coat And Hat Hook

218709299
N0PARTN0: RNCC: 3 | RNVC: 2

8 Jul 1975

5340-21-911-1510
Nonmetallic Bumper

219111510
SJ-5012 021200 184406: RNCC: 3 | RNVC: 2

10 Mar 1994

5340-21-908-0553
General Purpose Resilient Mount

219080553
CPFFHS7164-1: RNCC: 3 | RNVC: 2
5340-01-157-1009: RNCC: 5 | RNVC: 1
CB-1120-3: RNCC: 5 | RNVC: 1

25 Jan 1991

5340-20-006-8519
Rod End Connector

200068519
AC2818: RNCC: 3 | RNVC: 2
MM-M10S: RNCC: 5 | RNVC: 2

19 Apr 2012

5340-21-814-9969
Spring Tension Clip

218149969
A2946-11-91: RNCC: 3 | RNVC: 2

29 Aug 1964

5340-21-921-2568
Webbing Strap

219212568
0078244-1: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-21-888-7546
Butt Hinge

218887546
1 1/2X72: RNCC: 3 | RNVC: 2

14 Mar 1982

5340-20-005-8569
Mounting Plate

200058569
0976227-1: RNCC: 3 | RNVC: 2

30 Sep 2010

5340-20-004-0049
Mounting Bracket

200040049
0079431-1: RNCC: 3 | RNVC: 2

3 Apr 2008

5340-21-810-8305
Loop Clamp

218108305
AN742D20C: RNCC: 3 | RNVC: 2

28 Nov 1963

5340-20-001-4082
Retaining Clip

200014082
0376162-1: RNCC: 3 | RNVC: 2
0376162: RNCC: D | RNVC: 9

30 Apr 2004

5340-20-004-3910
Mounting Plate

200043910
10674023-001PG: RNCC: 3 | RNVC: 2
10674023: RNCC: 5 | RNVC: 1

10 Nov 2008

5340-20-003-5373
Mounting Bracket

200035373
10640290-PW: RNCC: 3 | RNVC: 2
10640290: RNCC: 5 | RNVC: 1

22 Aug 2007

5340-21-908-4462
Mounting Plate

219084462
308-25-6502: RNCC: 3 | RNVC: 2

11 Jul 1992

5340-21-905-5372
Mounting Bracket

219055372
B-27658: RNCC: 3 | RNVC: 2

16 Feb 1989

5340-20-002-8348
Bracket (Nvis)

200028348
318-800087-5: RNCC: 3 | RNVC: 2

14 Jul 2006

5340-21-910-8899
Access Door

219108899
87500141: RNCC: 3 | RNVC: 2
NOD3138/346: RNCC: 5 | RNVC: 2

27 Aug 1993

5340-20-005-6022
Cover Ring

200056022
AC69010-07-01: RNCC: 3 | RNVC: 2

19 May 2010

5340-20-003-9302
Mounting Bracket

200039302
0776057-1: RNCC: 3 | RNVC: 2

3 Mar 2008

5340-21-888-7659
Chain Bolt

218887659
1055-3: RNCC: 3 | RNVC: 2
1055-3: RNCC: 3 | RNVC: 2

27 Mar 1982

5340-21-905-5924
Holder

219055924
CF 819 103 A: RNCC: 3 | RNVC: 2

10 Mar 1990

5340-21-905-5691
Nonmetallic Bumper

219055691
586 52 0021: RNCC: 3 | RNVC: 2

31 Aug 1989

5340-21-660-1200
Screw Hook

216601200
1181: RNCC: 3 | RNVC: 2
1181 1 1-4IN: RNCC: 3 | RNVC: 2
1185-1-1-4IN: RNCC: 3 | RNVC: 2
131-8932: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-853-9835
Butt Hinge

218539835
MS20257C5-4600: RNCC: 2 | RNVC: 2

23 Jul 1969

5340-20-002-7723
Coating Abras Plate

200027723
10628288: RNCC: 3 | RNVC: 2

7 Jun 2006

5340-20-001-1684
Dust And Moisture Seal Protective Cap

200011684
40-10242: RNCC: 3 | RNVC: 2

8 Dec 2003

5340-20-007-8515
Mounting Plate

200078515
10707872-011PEG: RNCC: 3 | RNVC: 2
10707872: RNCC: D | RNVC: 9

26 Aug 2013

5340-21-660-1685
Expansion Shield

216601685
01048: RNCC: 3 | RNVC: 2
101-01048: RNCC: 3 | RNVC: 2
101-854: RNCC: 3 | RNVC: 2
854: RNCC: 3 | RNVC: 2
12: RNCC: 5 | RNVC: 1
115-0719: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-003-5198
Turnbuckle

200035198
TS081616: RNCC: 3 | RNVC: 2

10 Aug 2007

5340-21-873-1465
Webbing Strap

218731465
7438: RNCC: 3 | RNVC: 2

4 Feb 1976

5340-20-006-9931
Thumb Latch

200069931
690-1883: RNCC: 3 | RNVC: 2
007501: RNCC: 5 | RNVC: 2
PS-D-738: RNCC: D | RNVC: 9

3 Jul 2012

5340-21-900-1562
Rod End Clevis

219001562
0190-60243-103: RNCC: 3 | RNVC: 2

13 Feb 1986

5340-20-002-4112
Mounting Plate

200024112
130014DE151-1: RNCC: 3 | RNVC: 2
130014DE151: RNCC: D | RNVC: 9

15 Dec 2005

5340-20-000-2345
Mounting Plate

200002345
9379221-1: RNCC: 3 | RNVC: 2

20 Jun 2002

5340-21-912-3285
Access Cover

219123285
WG 302 167: RNCC: 3 | RNVC: 2
59.28.008.A: RNCC: 5 | RNVC: 2

29 Mar 1995

5340-20-001-5007
Access Cover

200015007
9775332-1: RNCC: 3 | RNVC: 2
9775332: RNCC: D | RNVC: 9

23 Jun 2004

5340-21-908-3859
Rod End Clevis

219083859
87620123-101: RNCC: 3 | RNVC: 2

6 Feb 1992

5340-21-330-7843

5340-21-712-7055

5340-21-812-2737
Rod End Clevis

218122737
205458: RNCC: 5 | RNVC: 2

28 Jan 1965

5340-20-007-9225
Mechanic Equipment Hardware Kit

200079225
10688884-011: RNCC: 3 | RNVC: 2
10688884: RNCC: 5 | RNVC: 2

16 Sep 2013

5340-21-311-9404
Retaining Strap

213119404
J861-15: RNCC: 3 | RNVC: 2

25 May 1968

5340-21-803-4103

5340-21-807-4377

5340-20-005-7004
Mounting Plate

200057004
1SI0176-320: RNCC: 3 | RNVC: 2

28 Jun 2010

5340-21-866-9695
Expansion Shield

218669695
151-2055: RNCC: 3 | RNVC: 2
2055: RNCC: 3 | RNVC: 2
151-14006: RNCC: 3 | RNVC: 2

18 Aug 1972

5340-21-896-2798
Angle Bracket

218962798
027533503: RNCC: 3 | RNVC: 2

19 Aug 1984

5340-21-901-8049
Grooved Clamp Coupling

219018049
424.390: RNCC: 3 | RNVC: 2
453 8209-624: RNCC: 3 | RNVC: 2

22 Apr 1986

5340-21-908-3976
Butt Hinge

219083976
704-133605-903-0: RNCC: 3 | RNVC: 2
MS20001P5-7200: RNCC: 5 | RNVC: 1

27 Mar 1992

5340-20-001-1120
Access Cover

200011120
GM119-1551-17: RNCC: 3 | RNVC: 2

6 Nov 2003

5340-20-005-5806
Mounting Bracket

200055806
AC40316-02: RNCC: 3 | RNVC: 2

17 May 2010

5340-21-007-3364
Spring Tension Clip

210073364
9265109: RNCC: 3 | RNVC: 2
GF9H26-0020082ITEM54: RNCC: 3 | RNVC: 2
C84775: RNCC: 5 | RNVC: 2

6 Jun 1968

5340-20-005-9376
Mounting Plate

200059376
TE10017696-001: RNCC: 3 | RNVC: 2

25 Nov 2010

5340-21-878-0033
Latch Assembly

218780033
T958: RNCC: 3 | RNVC: 2

6 Dec 1977

5340-20-007-7027
Mounting Bracket

200077027
524-801001-000: RNCC: 3 | RNVC: 2

12 Jun 2013

5340-20-005-5841
Bumper

200055841
HW10098: RNCC: 3 | RNVC: 2
10716-05074: RNCC: 5 | RNVC: 2

17 May 2010

5340-21-813-0270
Loop Clamp

218130270
AN742-32CB: RNCC: 3 | RNVC: 2

27 Jun 1964

5340-21-911-9147
Mechanic Equipment Hardware Kit

219119147
2142-0040: RNCC: 3 | RNVC: 2

8 Jul 1994

5340-20-003-5094
Mounting Plate

200035094
10664615-001PW: RNCC: 3 | RNVC: 2
10664615: RNCC: 5 | RNVC: 1

6 Aug 2007

5340-21-003-5631
Resilient Mount

210035631
3308978: RNCC: 3 | RNVC: 2

25 May 1968

5340-21-893-8232
Left-Hand Tubing As

218938232
306747: RNCC: 3 | RNVC: 2

2 Oct 1983

5340-20-003-5261
Access Cover

200035261
10664294-001PW: RNCC: 3 | RNVC: 2
10664294: RNCC: 5 | RNVC: 1

14 Aug 2007

5340-20-005-0038
Support Guard

200050038
TE20018669-100: RNCC: 3 | RNVC: 2
TE20018669: RNCC: 5 | RNVC: 1

10 Aug 2009

5340-21-897-8665
Master Pin

218978665
34-203: RNCC: 3 | RNVC: 2

14 Feb 1985

5340-21-901-8303
General Purpose Resilient Mount

219018303
FBS-400: RNCC: 3 | RNVC: 2

30 Sep 1986

5340-20-007-5820
Access Cover

200075820
10655889-011: RNCC: 3 | RNVC: 2
10655889: RNCC: D | RNVC: 9

16 Apr 2013

5340-20-003-2940
Reinforcement Shiel

200032940
B30501-019-1: RNCC: 3 | RNVC: 2

4 Apr 2007

5340-20-004-9342
Electronic Equipment Hardware Kit

200049342
330-0407: RNCC: 3 | RNVC: 2

2 Jul 2009

5340-20-004-9959
Angle Bracket

200049959
10673750-011PW: RNCC: 3 | RNVC: 2
10673750: RNCC: D | RNVC: 9

3 Aug 2009

5340-21-905-5820
Lock-Release Lever

219055820
1109-3NM: RNCC: 3 | RNVC: 2
1109-3: RNCC: 5 | RNVC: 1
1109-003: RNCC: 5 | RNVC: 2

25 Jan 1990

5340-21-896-9589
Rod End Clevis

218969589
51-1303: RNCC: 3 | RNVC: 2

23 Sep 1984

5340-20-007-4447
Blank Panel

200074447
9800K254-01: RNCC: 3 | RNVC: 2

6 Feb 2013

5340-21-908-4451
Headless Grooved Rod

219084451
308-25-7516: RNCC: 3 | RNVC: 2

10 Jul 1992

5340-20-005-1022
Dust And Moisture Seal Protective Cap

200051022
MIL-EFD-25: RNCC: 3 | RNVC: 2

13 Oct 2009

5340-20-005-5647
Mounting Plate

200055647
AC40120-29: RNCC: 3 | RNVC: 2

13 May 2010

5340-21-913-0098
Insert

219130098
ST3031-23: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-21-859-0004
Tee Hinge

218590004
03X3S: RNCC: 3 | RNVC: 2

16 Apr 1970

5340-21-901-8597
Expansion Shield

219018597
34666: RNCC: 3 | RNVC: 2

23 Mar 1987

5340-21-908-5147
Mounting Plate

219085147
CF VAB 111AA: RNCC: 3 | RNVC: 2

10 Feb 1993

5340-21-908-4070
Spring Holder

219084070
215-26057: RNCC: 3 | RNVC: 2

28 May 1992

5340-20-007-8415
Mounting Plate

200078415
10707245-011PEG: RNCC: 3 | RNVC: 2
10707245: RNCC: D | RNVC: 9

22 Aug 2013

5340-20-005-4538
Mounting Plate

200054538
B30603-521-1: RNCC: 3 | RNVC: 2

20 Apr 2010

5340-21-905-5978
Cover

219055978
704-133605-902-2: RNCC: 3 | RNVC: 2

28 Apr 1990

5340-21-870-9541
Snap Hook

218709541
0-53-0088: RNCC: 3 | RNVC: 2

1 Apr 1976

5340-21-866-9540
Rod Threaded Socket

218669540
110R: RNCC: 3 | RNVC: 1
110R-3/4: RNCC: 3 | RNVC: 2

14 Jul 1972

5340-20-003-4813
Mounting Bracket

200034813
10663745-001PW: RNCC: 3 | RNVC: 2
10663745: RNCC: 5 | RNVC: 1

25 Jul 2007

5340-21-911-9609
Angle Bracket

219119609
704-136000-905-0: RNCC: 3 | RNVC: 2

29 Oct 1994

5340-20-007-3625
Mounting Bracket

200073625
10696229-011: RNCC: 3 | RNVC: 2
10696229: RNCC: D | RNVC: 9

3 Jan 2013

5340-21-660-0839
Sash Balance

216600839
392HD: RNCC: 3 | RNVC: 2
130-2139: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-905-5935
Electrical-Mechanical Equipment Post

219055935
506202/014: RNCC: 3 | RNVC: 2
A506202/014: RNCC: 3 | RNVC: 2

30 Mar 1990

5340-20-006-0761
Block Assy-Hinge Lo

200060761
82510043-003: RNCC: 3 | RNVC: 2

25 Jan 2011

5340-21-865-9641
Loop Clamp

218659641
CLE3-4: RNCC: 3 | RNVC: 2
MQ-1469865: RNCC: 5 | RNVC: 2

14 Apr 1972

5340-21-881-4818
Electrical-Mechanical Equipment Post

218814818
240758: RNCC: 3 | RNVC: 2

6 Nov 1979

5340-21-866-9130
Butt Hinge

218669130
1041P: RNCC: 3 | RNVC: 2

16 Jun 1972

5340-21-809-9361
Access Cover

218099361
10N162: RNCC: 3 | RNVC: 2
S1413: RNCC: 3 | RNVC: 2

7 Mar 1968

5340-20-007-3752
Mounting Bracket

200073752
10707281-011: RNCC: 3 | RNVC: 2
10707281: RNCC: D | RNVC: 9

9 Jan 2013

5340-20-007-7587
Mounting Bracket

200077587
10663465-011PEG: RNCC: 3 | RNVC: 2
10663465: RNCC: D | RNVC: 9

8 Jul 2013

5340-21-660-0392
Corrosion Preventive Anode

216600392
5340STD100-89B: RNCC: 3 | RNVC: 2
P7B2: RNCC: 3 | RNVC: 2
EFL-Z-47A: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-660-1669
Expansion Shield

216601669
1815-00300: RNCC: 3 | RNVC: 2
1815-3: RNCC: 3 | RNVC: 2
1815: RNCC: 3 | RNVC: 2
1815: RNCC: 3 | RNVC: 2
1815: RNCC: 3 | RNVC: 2
1815-00300: RNCC: 3 | RNVC: 2
1815-3: RNCC: 3 | RNVC: 2
38554: RNCC: 5 | RNVC: 2
115-0080: RNCC: 6 | RNVC: 9
115-0082: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-868-9085
Door Closer

218689085
DCRS534: RNCC: 3 | RNVC: 1
5340-5156: RNCC: 6 | RNVC: 9

31 Dec 1973

5340-21-913-2959
Dust And Moisture Seal Protective Cap

219132959
371-01191-00: RNCC: 3 | RNVC: 2
LO-11458-00 REV D IT6: RNCC: 6 | RNVC: 9

27 Sep 1996

5340-21-905-5960
Retaining Strap

219055960
704-137000-909-0: RNCC: 3 | RNVC: 2

8 May 1990

5340-21-913-6502
Mounting Bracket

219136502
1022-2183-01: RNCC: 3 | RNVC: 2

7 Feb 1997

5340-21-896-2376
Swivel Caster

218962376
20-1782: RNCC: 3 | RNVC: 2

8 Jul 1984

5340-21-905-5504
Hinge Set

219055504
8875184: RNCC: 3 | RNVC: 2

29 Apr 1989

5340-21-913-1251
Strap Fastener Loop

219131251
MH-118: RNCC: 3 | RNVC: 2

19 Sep 1996

5340-21-660-0304
Strap Hinge

216600304
69GP1: RNCC: 2 | RNVC: 1
209: RNCC: 3 | RNVC: 1
209-12: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-007-3630
Mounting Bracket

200073630
10696248-011PW: RNCC: 3 | RNVC: 2
10696248: RNCC: D | RNVC: 9

3 Jan 2013

5340-21-908-0687
Access Cover

219080687
10552445: RNCC: 3 | RNVC: 2

5 Apr 1991

5340-21-799-7527

5340-21-870-9535
Webbing Strap

218709535
7260: RNCC: 3 | RNVC: 2

10 Mar 1976

5340-20-007-8499
Mounting Bracket

200078499
10689725-011PG: RNCC: 3 | RNVC: 2
10689725: RNCC: D | RNVC: 9

26 Aug 2013

5340-21-908-0631
Access Door

219080631
K2-1114: RNCC: 3 | RNVC: 2

2 Mar 1991

5340-21-660-0319
Tee Hinge

216600319
904: RNCC: 3 | RNVC: 1
904-12: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-865-1635
Butt Hinge

218651635
158: RNCC: 3 | RNVC: 1
158C1B: RNCC: 3 | RNVC: 2
158J: RNCC: 3 | RNVC: 2
131-8260: RNCC: 6 | RNVC: 9

19 May 1972

5340-20-005-9815
Plug-Hole

200059815
207-650401-040-101: RNCC: 3 | RNVC: 2

13 Dec 2010

5340-21-901-8448
Nonmetallic Bumper

219018448
RB-345: RNCC: 3 | RNVC: 2

20 Jan 1987

5340-20-006-9131
Mounting Bracket

200069131
10692970-011PG: RNCC: 3 | RNVC: 2

23 May 2012

5340-20-003-1716
Angle Bracket

200031716
10665332-011: RNCC: 3 | RNVC: 2

22 Jan 2007

5340-21-905-5954
Angle Bracket

219055954
704-133600-902-2: RNCC: 3 | RNVC: 2

20 Apr 1990

5340-21-905-5869
High Pressure Seat

219055869
1113-16: RNCC: 3 | RNVC: 2
1053-20: RNCC: 5 | RNVC: 1
1113-016: RNCC: 5 | RNVC: 2

27 Feb 1990

5340-21-802-5488

5340-20-000-8365
Access Cover

200008365
10652007-001: RNCC: 3 | RNVC: 2
10652007: RNCC: D | RNVC: 9

13 Jun 2003

5340-20-002-0939
Access Cover

200020939
GC219-2700-3: RNCC: 3 | RNVC: 2

31 May 2005

5340-20-006-3265
Mechanical Componen

200063265
1151-0001: RNCC: 3 | RNVC: 2

2 Jun 2011

5340-21-853-6289
Retaining Strap

218536289
C22-218: RNCC: 3 | RNVC: 2

22 Mar 1969

5340-20-005-7842
Rsd Safety Bar

200057842
6332D121-1: RNCC: 3 | RNVC: 2

9 Aug 2010

5340-20-005-4206
Double Angle Bracket

200054206
10679579-011PW: RNCC: 3 | RNVC: 2

31 Mar 2010

5340-21-889-8299
Special Release Pin

218898299
53508T: RNCC: 3 | RNVC: 2

14 Jun 1982

5340-20-007-6581
Dust And Moisture Seal Protective Plug

200076581
VC-12-00062-1: RNCC: 3 | RNVC: 2

21 May 2013

5340-20-001-1685
Dust And Moisture Seal Protective Cap

200011685
40-10243: RNCC: 3 | RNVC: 2

8 Dec 2003

5340-20-002-4282
Mounting Bracket

200024282
130014DE296-1: RNCC: 3 | RNVC: 2
130014DE296: RNCC: D | RNVC: 9

22 Dec 2005

5340-20-006-3777
Support Hook

200063777
1003311: RNCC: 3 | RNVC: 2
1003311: RNCC: 3 | RNVC: 9

23 Jun 2011

5340-21-812-0735

5340-20-001-4631
Access Cover

200014631
GD235-1021-3: RNCC: 3 | RNVC: 2

29 May 2004

5340-20-001-9753
Clamp Assembly

200019753
215T58019-54: RNCC: 3 | RNVC: 2
215T58019: RNCC: D | RNVC: 9

7 Apr 2005

5340-20-006-0740
Lanyard

200060740
LW1036-3-8: RNCC: 3 | RNVC: 2

25 Jan 2011

5340-20-004-3735
Mounting Plate

200043735
541694-1: RNCC: 3 | RNVC: 2

27 Oct 2008

5340-21-860-5802
Rod End Clevis

218605802
ME3716-2: RNCC: 3 | RNVC: 2

15 Oct 1970

5340-21-921-0906
Br Installation Kit

219210906
8277646-3: RNCC: 3 | RNVC: 2
ECC171507: RNCC: 6 | RNVC: 9

5 Apr 2001

5340-20-005-1043
Angle Bracket

200051043
B30603-205-1: RNCC: 3 | RNVC: 2

14 Oct 2009

5340-21-311-9560

5340-21-311-9558

5340-21-311-9481

5340-21-866-4187
Door Handle

218664187
D74-32: RNCC: 3 | RNVC: 2
200-10-250: RNCC: 6 | RNVC: 9

19 May 1972

5340-21-897-8365
Expansion Shield

218978365
38516-X: RNCC: 3 | RNVC: 2
1/2X5: RNCC: 3 | RNVC: 2

20 Dec 1984

5340-20-000-2187
Mounting Bracket

200002187
9378530-1: RNCC: 3 | RNVC: 2

13 Jun 2002

5340-21-859-1261
Door Hinge

218591261
2747-1-8: RNCC: 3 | RNVC: 2

18 Jun 1970

5340-20-007-3796
Block Clamp

200073796
RON 212.7X: RNCC: 3 | RNVC: 2
10707294-001: RNCC: 7 | RNVC: 2

10 Jan 2013

5340-21-890-4596
Nonmetallic Bumper

218904596
MEXE26927: RNCC: 3 | RNVC: 2

4 Oct 1982

5340-21-908-0661
Angle Bracket

219080661
407010101015: RNCC: 3 | RNVC: 2

20 Mar 1991

5340-21-886-5812
Expansion Shield

218865812
JS14C: RNCC: 3 | RNVC: 2

31 Aug 1981

5340-21-908-3985
Double Angle Bracket

219083985
702-139205-916-0: RNCC: 3 | RNVC: 2

4 Apr 1992

5340-21-895-0542
Loop Clamp

218950542
79052-01-6-231: RNCC: 3 | RNVC: 2

25 Mar 1984

5340-21-879-5509
Electrical-Mechanical Equipment Post

218795509
6628-1023: RNCC: 3 | RNVC: 2

17 Oct 1978

5340-21-920-5506
Mounting Plate

219205506
628-800181-001: RNCC: 3 | RNVC: 2
628-800181-001: RNCC: 5 | RNVC: 9

9 Mar 2000

5340-21-913-0817
Angle Bracket

219130817
9475746-1: RNCC: 3 | RNVC: 2

20 Apr 1996

5340-21-108-8545
Angle Bracket

211088545
114-247: RNCC: 3 | RNVC: 2
ZACAN7394: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-004-1269
Mounting Plate

200041269
541493-1: RNCC: 3 | RNVC: 2

20 May 2008

5340-21-908-4602
Clamp

219084602
85007-1: RNCC: 3 | RNVC: 2

26 Aug 1992

5340-21-860-6499
Turnbuckle

218606499
50-26: RNCC: 3 | RNVC: 2

12 Nov 1970

5340-21-893-7819
Closer Door Arm

218937819
4024-RH: RNCC: 3 | RNVC: 2

16 Jul 1983

5340-20-003-2123
Adapter Plate Assem

200032123
B30601-174-1: RNCC: 3 | RNVC: 2

16 Feb 2007

5340-21-853-6655
Handwheel

218536655
89C42347-1: RNCC: 3 | RNVC: 2

22 Mar 1969

5340-20-000-4817
Mounting Bracket

200004817
9875067-1: RNCC: 3 | RNVC: 2

24 Oct 2002

5340-21-920-5081
Mounting Plate

219205081
1202-32-1: RNCC: 3 | RNVC: 2

3 Feb 2000

5340-21-908-3388
Pawl Fastener

219083388
131 9110/4: RNCC: 3 | RNVC: 2
1319110-4: RNCC: 3 | RNVC: 2

16 Oct 1991

5340-20-006-3481
Bow Handle

200063481
82510112-101: RNCC: 3 | RNVC: 2

15 Jun 2011

5340-21-905-5297
Angle Bracket

219055297
150116772771: RNCC: 3 | RNVC: 2
8280881-1: RNCC: 6 | RNVC: 9

4 Dec 1988

5340-20-006-6958
Retaining Band

200066958
MD004577: RNCC: 3 | RNVC: 2

26 Jan 2012

5340-21-908-5283
Access Door

219085283
8879475-1: RNCC: 3 | RNVC: 2

2 Apr 1993

5340-21-920-2769
Cushioning Pad

219202769
1028205-1: RNCC: 3 | RNVC: 2

16 Aug 1999

5340-21-660-0194
Butt Hinge

216600194
291C4 3 X 3: RNCC: 3 | RNVC: 2
131-7106: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-007-9236
Mounting Bracket

200079236
10688083-011PEW: RNCC: 3 | RNVC: 2
10688083: RNCC: D | RNVC: 9

16 Sep 2013

5340-20-007-8610
Mounting Bracket

200078610
7007-1078-1: RNCC: 3 | RNVC: 2

28 Aug 2013

5340-20-000-8092
Mounting Bracket

200008092
10657488-011PEW: RNCC: 3 | RNVC: 2
10657488: RNCC: D | RNVC: 9

4 Jun 2003

5340-20-008-1217
Mounting Plate

200081217
10706304-001: RNCC: 3 | RNVC: 2
10706304: RNCC: D | RNVC: 9

21 Nov 2013

5340-20-007-9539
Mounting Bracket

200079539
10696364-011PEG: RNCC: 3 | RNVC: 2
10696364: RNCC: D | RNVC: 9

27 Sep 2013

5340-21-905-5898
Mounting Plate

219055898
CF819452A: RNCC: 3 | RNVC: 2

23 Feb 1990

5340-20-004-0668
Mounting Plate

200040668
B40: RNCC: 3 | RNVC: 2

29 Apr 2008

5340-21-889-4643
Clamp Casting

218894643
4320-222: RNCC: 3 | RNVC: 2
85-692-0715: RNCC: 6 | RNVC: 9
85-692-2974: RNCC: 6 | RNVC: 9

10 Jul 1982

5340-20-001-7940
Mechanical Stop

200017940
GM3-M1112A: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-21-660-1101
Thumb Latch

216601101
1260-3: RNCC: 3 | RNVC: 2
1260C1B-3: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-913-6447
Sealing Plug Assembly

219136447
6346C318-1: RNCC: 3 | RNVC: 2

1 Jan 1997

5340-20-005-1148
Angle Bracket

200051148
542950-1: RNCC: 3 | RNVC: 2

19 Oct 2009

5340-20-003-2450
Stop Lever

200032450
215T92291-2: RNCC: 3 | RNVC: 2

6 Mar 2007

5340-21-805-4316
Mounting Bracket

218054316
BK14007-1: RNCC: 3 | RNVC: 2
BK22192: RNCC: 3 | RNVC: 2

27 Aug 1969

5340-21-911-9173
Mounting Plate

219119173
50505 62002: RNCC: 3 | RNVC: 2

21 Jul 1994

5340-21-851-3798
Stay Roller

218513798
54: RNCC: 3 | RNVC: 2

6 Oct 1968

5340-20-003-5339
Plug Button

200035339
245-051: RNCC: 3 | RNVC: 2
10642801: RNCC: 5 | RNVC: 1

21 Aug 2007

5340-20-000-9039
Lever Bracket

200009039
200H-0155-B: RNCC: 3 | RNVC: 2

21 Jul 2003

5340-20-006-0216
Mounting Bracket

200060216
0656-034947-12: RNCC: 3 | RNVC: 2

22 Dec 2010

5340-20-007-9868
Mounting Bracket

200079868
1177409-1: RNCC: 3 | RNVC: 2

7 Oct 2013

5340-21-913-1338
Access Cover

219131338
9475763-1: RNCC: 3 | RNVC: 2

23 May 1996

5340-21-908-4683
Angle Bracket

219084683
CF 407 792 A: RNCC: 3 | RNVC: 2

4 Sep 1992

5340-20-004-3721
Mounting Bracket

200043721
541652-1: RNCC: 3 | RNVC: 2

27 Oct 2008

5340-20-007-8608
Mounting Bracket

200078608
1177079-1: RNCC: 3 | RNVC: 2

28 Aug 2013

5340-21-896-9665

5340-21-660-0855
Transom Chain

216600855
9880: RNCC: 3 | RNVC: 2
130-5052: RNCC: 6 | RNVC: 9
130-5055: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-007-1661
Mounting Plate

200071661
10681501-001PG: RNCC: 3 | RNVC: 2

25 Sep 2012

5340-20-006-0912
Air Vent Clamp Layo

200060912
0656-036275-01: RNCC: 3 | RNVC: 2

3 Feb 2011

5340-21-906-7490
Mounting Bracket

219067490
CF 349 744 A: RNCC: 3 | RNVC: 2

11 May 1989

5340-21-866-9236
Complete Key Chain

218669236
200-11-570: RNCC: 3 | RNVC: 2

14 Jul 1972

5340-21-910-8759
Rim Clenching Clamp

219108759
8668003-1: RNCC: 3 | RNVC: 2

1 Jul 1993

5340-20-006-3564
Mounting Bracket

200063564
10675763-011: RNCC: 3 | RNVC: 2

16 Jun 2011

5340-21-921-3607
Mounting Bracket

219213607
10639589-PW: RNCC: 3 | RNVC: 2

18 Oct 2001

5340-21-921-6457
Mounting Bracket

219216457
10627697-PW: RNCC: 3 | RNVC: 2

12 Feb 2002

5340-20-007-6068
Mounting Bracket

200076068
10705034-001PEW: RNCC: 3 | RNVC: 2
10705034: RNCC: D | RNVC: 9

24 Apr 2013

5340-21-913-2954
Mounting Bracket

219132954
10558813: RNCC: 3 | RNVC: 2

22 Sep 1996

5340-21-914-9156
Mounting Bracket

219149156
10557796: RNCC: 3 | RNVC: 2

19 Sep 1998

5340-21-914-9177
Mounting Bracket

219149177
10557993: RNCC: 3 | RNVC: 2

16 Oct 1998

5340-21-898-4517
Electrical-Mechanical Equipment Post

218984517
635-6283-001: RNCC: 3 | RNVC: 2

11 Jul 1985

5340-21-874-3719
Retaining Strap

218743719
112: RNCC: 3 | RNVC: 2

8 Mar 1977

5340-21-920-8059
Binding Pos Adapter

219208059
9378709-1: RNCC: 3 | RNVC: 2

22 Sep 2000

5340-21-905-5656
Webbing Strap

219055656
8277233-1: RNCC: 3 | RNVC: 2

18 Aug 1989

5340-21-866-9813
D Knobs And Spindle

218669813
B124AY22: RNCC: 3 | RNVC: 2

18 Aug 1972

5340-21-802-2937

5340-21-806-3782

5340-20-007-9238
Cushioning Pad

200079238
10685398-001: RNCC: 3 | RNVC: 2
10685398: RNCC: D | RNVC: 9

16 Sep 2013

5340-21-311-9552
Retaining Band

213119552
J800-30: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-901-8985
Hand Carrying Strap Assembly

219018985
8727179-1: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-21-910-8625
Block Fairlead

219108625
LS00155-1: RNCC: 3 | RNVC: 2

12 Jun 1993

5340-20-000-1713
Angle Bracket

200001713
9379210-1: RNCC: 3 | RNVC: 2

29 May 2002

5340-20-001-0835
Webbing Strap

200010835
9278808-3: RNCC: 3 | RNVC: 2

23 Oct 2003

5340-21-868-9787
Pipe Bracket

218689787
CT65X2.000: RNCC: 3 | RNVC: 2

5 Nov 1974

5340-21-905-5022
Strapping

219055022
K-V255: RNCC: 3 | RNVC: 2

11 May 1988

5340-20-001-0975
Manual Control Lever

200010975
10651907-PEG: RNCC: 3 | RNVC: 2

31 Oct 2003

Load More Results