5340-20-004-1382

DAC: 4 5 Jun 2007 5315-21-913-5831 Spring Pin 240-044RNCC: 3 | RNVC: 2 | DAC: 2 30 Apr 1997 5340-20-004-1382

5310-01-656-6376 5310016566376 016566376 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

Nov 2003 9905-21-920-0912 Instruction Plate 10616845-10RNCC: 3 | RNVC: 2 | DAC: 2 5 May 1999 5340-20-004-1382