What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

Hardware, Commercial - Canada (CA)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Canada (CA) - NCB is 20 or 21

Page 53 of 64

NSN Format for Hardware, Commercial
Codified by Canada

53	40	21	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Canada (CA)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 190 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 63 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 26 Items
What is a Rod End Connector? 44 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 69 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 226 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 94 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 20 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 582 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 43 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 202 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 65 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Shelf Bracket? 33 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Door Hook And Eye? 22 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 77 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 12 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 23 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 23 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 44 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 13 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is a Friction Catch? 38 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 15 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 39 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 26 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 86 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 20 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 42 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 91 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 57 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 25 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 163 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 101 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 21 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 16 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 288 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 52 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 23 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 131 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 24 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 41 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 70 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 45 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 210 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 163 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 82 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 44 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 38 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 25 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 20 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 42 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 18 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Glazier Point? 10 Items: A Glazier Point (POINT,GLAZIER) is a piece of thin sheet metal, triangular or diamond shaped, designed to hold a pane of glass in a wooden sash.
What is an Angle Bracket? 1105 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 81 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 32 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1130 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 20 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 49 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 37 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Quick Release Plunger? 13 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 114 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flush Catch? 97 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 13 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 86 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 115 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 177 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 24 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 53 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 219 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 40 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 494 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 353 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 55 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 51 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 12 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 601 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 32 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 39 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 34 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 41 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 21 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping? 19 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 93 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 117 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 31 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 45 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 19 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 832 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 35 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 40 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 75 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 106 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Picture Hanger? 10 Items: A Picture Hanger (HANGER,PICTURE) is a hook like device that is secured to walls, bulkheads, columns and the like, by means of a nail, screw, magnet or adhesive backed cloth, that is included with and/or attached to the hook. It is designed to hold and suspend variuos items such as photographs, paintings, maps, documents, etc.
What is a Protection Bellows? 16 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 57 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 49 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 2535 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 19 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 16 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 1222 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 48 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 64 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Threaded Hinged Standoff? 11 Items: A Threaded Hinged Standoff (STANDOFF,HINGED,THREADED) is a standoff, internally and/or externally, threaded on both ends with a hinge or pivot point to allow for independent movement of the ends.
What is a Spacing Threaded Standoff? 178 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 115 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a Crank Handle? 13 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 29 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Mechanic Equipment Hardware Kit? 87 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Dust And Moisture Seal Protective Cover? 38 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 51 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 308 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 41 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 39 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 178 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 27 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 80 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 86 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 53 of 64

5340-21-905-5046
Hinge

219055046
206-033-111-023: RNCC: 3 | RNVC: 2

28 May 1988

5340-20-008-1125
Mounting Bracket

200081125
0677950: RNCC: 3 | RNVC: 2

19 Nov 2013

5340-21-877-3789
Retaining Strap

218773789
23566: RNCC: 3 | RNVC: 2

22 Nov 1977

5340-21-921-3610
Mounting Bracket

219213610
10651931-011PW: RNCC: 3 | RNVC: 2

18 Oct 2001

5340-21-908-0021
Double Angle Bracket

219080021
704-137055-002-0: RNCC: 3 | RNVC: 2

26 May 1990

5340-21-908-0515
Mounting Bracket

219080515
9775359-1: RNCC: 3 | RNVC: 2
IGDS9156: RNCC: 5 | RNVC: 2
9389083: RNCC: 6 | RNVC: 9
9775359: RNCC: 6 | RNVC: 9

17 Jan 1991

5340-20-002-5032
Double Angle Bracket

200025032
C50703-248-1: RNCC: 3 | RNVC: 2
C50703-248: RNCC: D | RNVC: 9

8 Feb 2006

5340-20-000-4591
Mounting Bracket

200004591
10656482-011PEW: RNCC: 3 | RNVC: 2
10656482: RNCC: D | RNVC: 9

11 Oct 2002

5340-21-912-3164
Mounting Plate

219123164
626-601396-000: RNCC: 3 | RNVC: 2

25 Jan 1995

5340-21-914-6138
Hook Pipe Support

219146138
10557483: RNCC: 3 | RNVC: 2

10 Jun 1998

5340-21-880-7861
Rea Bracket

218807861
121595-1: RNCC: 3 | RNVC: 2

12 Mar 1980

5340-21-886-2209
Electrical-Mechanical Equipment Post

218862209
36673-2: RNCC: 3 | RNVC: 2

7 Jul 1981

5340-21-910-8829
Spring Tension Clip

219108829
8763838-1: RNCC: 3 | RNVC: 2

22 Jul 1993

5340-21-890-4559
Retaining Strap

218904559
VN30393-3: RNCC: 3 | RNVC: 2
30393-3: RNCC: 5 | RNVC: 2

26 Sep 1982

5340-20-007-0829
Mounting Bracket

200070829
1176870: RNCC: 1 | RNVC: 2
05211: RNCC: 3 | RNVC: 2
2037-307: RNCC: 5 | RNVC: 2

15 Aug 2012

5340-21-860-8680
Rim Latch Set

218608680
C1375TJK: RNCC: 3 | RNVC: 2

15 Apr 1971

5340-21-900-1285
Pivot

219001285
IP-170LH: RNCC: 3 | RNVC: 2
IP170LH: RNCC: 3 | RNVC: 2

26 Nov 1985

5340-21-896-9600
Expansion Shield

218969600
2715-00400: RNCC: 3 | RNVC: 2

23 Sep 1984

5340-20-000-7843
Access Cover

200007843
356H-0014-0: RNCC: 3 | RNVC: 2

27 May 2003

5340-21-897-8332
Retaining Strap

218978332
STRAP3/4IN: RNCC: 3 | RNVC: 2

18 Dec 1984

5340-20-004-1922
Mounting Bracket

200041922
10656935-011PW: RNCC: 3 | RNVC: 2

3 Jul 2008

5340-20-005-5852
Mechanical Stop

200055852
AC49072-06: RNCC: 3 | RNVC: 2

18 May 2010

5340-20-000-6887
Angle Bracket

200006887
MS9592-381: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-20-004-3888
Mounting Bracket

200043888
10674336-011PW: RNCC: 3 | RNVC: 2
10674336: RNCC: 5 | RNVC: 1

7 Nov 2008

5340-20-006-0429
Manual Control Handle

200060429
A22500-073-1: RNCC: 3 | RNVC: 2

7 Jan 2011

5340-21-911-9192
Mounting Plate

219119192
A164-06: RNCC: 3 | RNVC: 2

26 Jul 1994

5340-21-817-9301

5340-21-901-8740
Antipilferage Seal

219018740
PRONGLOK4-5SVC: RNCC: 3 | RNVC: 2

8 Oct 1987

5340-21-920-0536
Butt Hinge

219200536
10617641: RNCC: 3 | RNVC: 2

26 Mar 1999

5340-21-884-0856
Rim Clenching Clamp

218840856
CANTRUSS15R53-3-8: RNCC: 3 | RNVC: 2
15R53-3-8: RNCC: 3 | RNVC: 2
15R53-3-8: RNCC: 3 | RNVC: 2
CANTRUSS15R53-3-8: RNCC: 5 | RNVC: 2
CANTRUSS15R53-3-8: RNCC: 5 | RNVC: 2

5 May 1981

5340-21-912-8438
Dust And Moisture Seal Boot

219128438
9277564-1: RNCC: 3 | RNVC: 2
LS00455-1: RNCC: 5 | RNVC: 2

24 Oct 1995

5340-21-855-0279

5340-21-901-8786
Angle Bracket

219018786
8577093-1: RNCC: 3 | RNVC: 2

9 Dec 1987

5340-21-913-0778
Mounting Plate

219130778
WG 450 484: RNCC: 3 | RNVC: 2
59.83.003.A: RNCC: 5 | RNVC: 2

12 Apr 1996

5340-21-660-0243
Butt Hinge

216600243
286: RNCC: 3 | RNVC: 1
286C4 2 X 1 9/16: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-007-6050
Dust And Moisture Seal Protective Cover

200076050
10706139-001PEG: RNCC: 3 | RNVC: 2
10706139: RNCC: D | RNVC: 9

24 Apr 2013

5340-21-841-6843
Grooved Clamp Coupling

218416843
994LB-2046: RNCC: 3 | RNVC: 2
4714-4-2046: RNCC: 5 | RNVC: 2

27 Jun 1966

5340-21-908-0682
Manual Control Lever

219080682
40R25-79-536-1: RNCC: 3 | RNVC: 2

9 Apr 1991

5340-20-003-4913
Access Cover

200034913
10665024-001PW: RNCC: 3 | RNVC: 2
10665024: RNCC: 5 | RNVC: 1

27 Jul 2007

5340-21-920-5635
Swivel Caster

219205635
10603945-2: RNCC: 1 | RNVC: 2
WT1023-ACB-BR-4SL: RNCC: 3 | RNVC: 2

20 Mar 2000

5340-21-905-5317
Handwheel

219055317
8658815-1: RNCC: 3 | RNVC: 2

11 Dec 1988

5340-21-920-3355
Tray Lock

219203355
8778036-2: RNCC: 3 | RNVC: 2

23 Sep 1999

5340-21-896-2315
Butt Hinge Leaf

218962315
C5WM126208-3: RNCC: 3 | RNVC: 2

24 Jun 1984

5340-20-000-9939
Tapping Plate

200009939
0176102-1: RNCC: 3 | RNVC: 2
0176102: RNCC: 6 | RNVC: 9

29 Aug 2003

5340-21-914-7336
Loop Clamp

219147336
3118992-01: RNCC: 3 | RNVC: 2

25 Apr 1998

5340-21-851-0166
Key Blank

218510166
H175: RNCC: 3 | RNVC: 2

2 Aug 1968

5340-21-890-4841
Barrel Bolt

218904841
BOLT: RNCC: 3 | RNVC: 2

7 Nov 1982

5340-20-005-9451
Mounting Clam Knob

200059451
TE10017675-001: RNCC: 3 | RNVC: 2

29 Nov 2010

5340-21-911-9565
General Purpose Resilient Mount

219119565
7235-LZ/01: RNCC: 3 | RNVC: 2
907904-004: RNCC: 7 | RNVC: 2

6 May 2003

5340-20-003-8355
Mounting Bracket

200038355
10665351-011PG: RNCC: 3 | RNVC: 2

11 Jan 2008

5340-21-908-4919
General Purpose Resilient Mount

219084919
FP103579-01: RNCC: 3 | RNVC: 2

28 Nov 1992

5340-21-888-8449
Barrel Bolt

218888449
0-0: RNCC: 3 | RNVC: 1

2 May 1982

5340-21-914-2293
Loop Clamp

219142293
534-7048-001: RNCC: 3 | RNVC: 2

11 Feb 1998

5340-20-002-9048
Guard Spring

200029048
A20618-020-1: RNCC: 3 | RNVC: 2

30 Aug 2006

5340-21-891-6766
Support

218916766
6262943: RNCC: 3 | RNVC: 2

11 Jun 1983

5340-20-007-8257
Retaining Strap

200078257
10707118-002: RNCC: 3 | RNVC: 2
10707118: RNCC: D | RNVC: 9

13 Aug 2013

5340-20-004-6026
Catch Strike

200046026
301028-001: RNCC: 3 | RNVC: 2
301028: RNCC: 5 | RNVC: 1

24 Feb 2009

5340-21-851-3959
Clamp

218513959
M82237: RNCC: 3 | RNVC: 2
PL5568-47: RNCC: 5 | RNVC: 2

6 Oct 1968

5340-21-898-3017
Catch Strike

218983017
0120-62241-103: RNCC: 3 | RNVC: 2

17 May 1985

5340-21-870-9840
Hinge Assembly

218709840
1044465-501: RNCC: 3 | RNVC: 2
0035-7704: RNCC: 6 | RNVC: 9

13 Oct 1976

5340-21-660-1394
Rope Cleat

216601394
409: RNCC: 3 | RNVC: 1
409-15: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-000-2343
Mounting Plate

200002343
9378992-1: RNCC: 3 | RNVC: 2

20 Jun 2002

5340-20-001-0839
Webbing Strap

200010839
9279227-1: RNCC: 3 | RNVC: 2

24 Oct 2003

5340-20-003-8159
Mounting Bracket

200038159
0078483-1: RNCC: 3 | RNVC: 2

3 Jan 2008

5340-20-004-5450
Mounting Bracket

200045450
0477283-1: RNCC: 3 | RNVC: 2

6 Feb 2009

5340-20-003-5929
Bow Handle

200035929
0677983-1: RNCC: 3 | RNVC: 2

26 Sep 2007

5340-21-884-0392
Swivel Caster

218840392
9709OC: RNCC: 3 | RNVC: 2

20 Jan 1981

5340-20-005-0309
Angle Bracket

200050309
215T26067-2: RNCC: 3 | RNVC: 2

2 Sep 2009

5340-21-891-5933
Swivel Caster

218915933
G421-5: RNCC: 3 | RNVC: 2

2 Apr 1983

5340-21-921-4708
Access Cover

219214708
8679076-1: RNCC: 3 | RNVC: 2

26 Nov 2001

5340-21-908-4737
Coat And Hat Hook

219084737
2470-1: RNCC: 3 | RNVC: 2

4 Nov 1992

5340-21-886-6188
Butt Hinge

218866188
MS20257XC4-250: RNCC: 3 | RNVC: 2

21 Sep 1981

5340-21-905-5545
Resilient Mount

219055545
RF 200 504-Z: RNCC: 3 | RNVC: 2
RF 402 838 AE: RNCC: 5 | RNVC: 9

13 May 1989

5340-21-880-7860
Bracket Lh

218807860
121593-1: RNCC: 3 | RNVC: 2

12 Mar 1980

5340-21-870-9545
Turnbuckle

218709545
XD40137DX: RNCC: 3 | RNVC: 2
XD40137EX: RNCC: 3 | RNVC: 2
P202354-5: RNCC: 5 | RNVC: 2

24 Mar 1976

5340-21-914-2612
Block Clamp

219142612
W4196359-C: RNCC: 3 | RNVC: 2

28 Jun 1997

5340-20-002-4044
Mounting Bracket

200024044
130014DE256-1: RNCC: 3 | RNVC: 2
130014DE256: RNCC: D | RNVC: 9

15 Dec 2005

5340-21-912-8489
Access Cover

219128489
9427491-1: RNCC: 3 | RNVC: 2

2 Dec 1995

5340-21-908-5011
Upper Hinge Pin

219085011
C6TR1000-27: RNCC: 3 | RNVC: 2

20 Jan 1993

5340-20-004-3901
Mounting Bracket

200043901
10674465-001PG: RNCC: 3 | RNVC: 2
10674465: RNCC: 5 | RNVC: 1

7 Nov 2008

5340-20-006-4898
Access Cover

200064898
10680215-011: RNCC: 3 | RNVC: 2

6 Sep 2011

5340-21-913-0102
Ring

219130102
3112218-01: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-21-901-8044
Loop Footman

219018044
RR-215940/81: RNCC: 3 | RNVC: 2

22 Apr 1986

5340-20-001-7071
Cushioning Pad

200017071
137-221: RNCC: 3 | RNVC: 2
137-01B-DWG ITEM 64: RNCC: 6 | RNVC: 9
137-01B-PL ITEM 64: RNCC: 6 | RNVC: 9

9 Nov 2004

5340-20-006-7909
Safety Cable Kit

200067909
60-101-30-7000: RNCC: 3 | RNVC: 2

16 Mar 2012

5340-20-000-3010
Mounting Bracket

200003010
10652958-011PW: RNCC: 3 | RNVC: 2

25 Jul 2002

5340-21-921-3855
Double Angle Bracket

219213855
9379205-1: RNCC: 3 | RNVC: 2

26 Oct 2001

5340-21-847-5593
Loop Clamp

218475593
9-40733-1: RNCC: 3 | RNVC: 2

16 Aug 1967

5340-21-886-8793

5340-21-876-2281

5340-20-000-1710
Angle Bracket

200001710
9379454-1: RNCC: 3 | RNVC: 2

29 May 2002

5340-20-000-2797
Mounting Bracket

200002797
10656070-011PG: RNCC: 3 | RNVC: 2

16 Jul 2002

5340-21-311-9680

5340-21-882-8150
Angle Bracket

218828150
0120-60217-101: RNCC: 3 | RNVC: 2

14 May 1980

5340-21-911-8916
Access Cover

219118916
10-03803-02: RNCC: 3 | RNVC: 2

24 Jun 1994

5340-21-901-8165
Door Bottom Handle

219018165
200-10-575: RNCC: 3 | RNVC: 2

18 Jun 1986

5340-21-896-2537
Hinge

218962537
4842412768: RNCC: 3 | RNVC: 2

29 Jul 1984

5340-21-892-2655
Strap Assembly

218922655
8576: RNCC: 3 | RNVC: 2
6968308: RNCC: 5 | RNVC: 2

7 Mar 1983

5340-21-908-0542
Webbing Strap

219080542
8602/1: RNCC: 3 | RNVC: 2
10552806-1: RNCC: 5 | RNVC: 2
10552806-1: RNCC: 5 | RNVC: 2
10552806-1: RNCC: 5 | RNVC: 2

18 Jan 1991

5340-20-006-4129
Angle Bracket

200064129
AC86695-08-01: RNCC: 3 | RNVC: 2

12 Jul 2011

5340-20-000-5172
Mounting Bracket

200005172
10656458-011PEW: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-21-914-5349
Mounting Block

219145349
10625127-PW: RNCC: 3 | RNVC: 2
10625127-PCW: RNCC: 5 | RNVC: 9

17 Oct 1998

5340-20-007-3883
Mounting Bracket

200073883
10702870-011PW: RNCC: 3 | RNVC: 2
10702870: RNCC: D | RNVC: 9

14 Jan 2013

5340-21-914-9170
Torsion Hub

219149170
10628500-PG: RNCC: 3 | RNVC: 2
10628500: RNCC: D | RNVC: 9

26 Sep 1998

5340-20-001-7508
Cover Assembly

200017508
10660746-011: RNCC: 3 | RNVC: 2
10660746: RNCC: D | RNVC: 9

4 Dec 2004

5340-20-007-6988
Mounting Plate

200076988
TE30020527-001: RNCC: 3 | RNVC: 2
TE30020527: RNCC: D | RNVC: 9

11 Jun 2013

5340-20-007-6069
Mounting Bracket

200076069
10705025-011PEW: RNCC: 3 | RNVC: 2
10705025: RNCC: D | RNVC: 9

24 Apr 2013

5340-20-001-2812
Crank Handle

200012812
B61000-077-1: RNCC: 3 | RNVC: 2
B61000-077: RNCC: D | RNVC: 9

2 Mar 2004

5340-21-920-8298
Binding Pos Adapter

219208298
9378702-1: RNCC: 3 | RNVC: 2

6 Oct 2000

5340-20-005-4034
Angle Bracket

200054034
10677913-001PW: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-20-005-9726
Access Cover

200059726
82521016-003: RNCC: 3 | RNVC: 2

9 Dec 2010

5340-21-905-5864
Double Angle Bracket

219055864
CF 818 212 A: RNCC: 3 | RNVC: 2

14 Feb 1990

5340-21-914-1599
Mounting Plate

219141599
140188-1: RNCC: 3 | RNVC: 2

12 Jun 1997

5340-21-910-8734
Spring Tension Clip

219108734
8561134-1: RNCC: 3 | RNVC: 2

8 Jul 1993

5340-20-000-2404
Mounting Plate

200002404
9379258-1: RNCC: 3 | RNVC: 2

21 Jun 2002

5340-21-905-5061
Nonmetallic Bumper

219055061
4277: RNCC: 3 | RNVC: 2
CPF-000-024: RNCC: 5 | RNVC: 9

24 Jun 1988

5340-21-660-1876
Turnbuckle

216601876
303: RNCC: 3 | RNVC: 1
303X1-24: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-003-1744
Mounting Bracket

200031744
10666140-001PW: RNCC: 3 | RNVC: 2
10666140-001: RNCC: 5 | RNVC: 1

23 Jan 2007

5340-21-901-8576
Electrical-Mechanical Equipment Post

219018576
N-260: RNCC: 3 | RNVC: 2

26 Feb 1987

5340-21-108-9233
Catch Strike

211089233
9737-1: RNCC: 3 | RNVC: 2
1004574: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-002-1432
Mounting Bracket

200021432
2000993105: RNCC: 3 | RNVC: 2

7 Jul 2005

5340-20-002-4123
Mounting Plate

200024123
130014DE310-2: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-21-911-1397
Standard Bracket

219111397
8039-0: RNCC: 3 | RNVC: 2

10 Dec 1993

5340-21-879-5883
Bow Handle

218795883
84000372-3: RNCC: 3 | RNVC: 2

13 Mar 1979

5340-20-000-2648
Tie Down Bracket As

200002648
9379270-1: RNCC: 3 | RNVC: 2

4 Jul 2002

5340-21-920-9444
Travel Lock. Pin

219209444
0080750-1: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-21-908-0453
Furniture Glide

219080453
9-1 1/2 X 1: RNCC: 3 | RNVC: 2
85-102-A-4: RNCC: 3 | RNVC: 2

4 Jan 1991

5340-21-886-5919
Retaining Strap

218865919
114573: RNCC: 3 | RNVC: 2

5 Sep 1981

5340-20-005-3186
Mounting Plate

200053186
85331181-103: RNCC: 3 | RNVC: 2

18 Feb 2010

5340-21-905-5079
Angle Bracket

219055079
M0120-62292-103: RNCC: 3 | RNVC: 2

8 Jul 1988

5340-21-660-0899
Barrel Bolt

216600899
1077: RNCC: 3 | RNVC: 1
1077-2 1/2: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-813-8898
Angle Bracket

218138898
16-1001-1: RNCC: 3 | RNVC: 2

13 Jun 1964

5340-20-000-8448
Double Angle Bracket

200008448
0175390-001: RNCC: 3 | RNVC: 2
0175390: RNCC: D | RNVC: 9

17 Jun 2003

5340-21-901-8699
Nonmetallic Solid Wheel

219018699
C-167061: RNCC: 3 | RNVC: 2

30 Jul 1987

5340-20-002-4105
Double Angle Bracket

200024105
130014DE207-1: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-21-912-3287
Plate Backing

219123287
WW 407 386 B: RNCC: 3 | RNVC: 2

29 Mar 1995

5340-20-000-2484
Mounting Plate

200002484
9379912-1: RNCC: 3 | RNVC: 2

26 Jun 2002

5340-21-660-1863
Turnbuckle

216601863
302: RNCC: 3 | RNVC: 1
302X1/2-6: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-006-0749
Mounting Bracket

200060749
82110439-001: RNCC: 3 | RNVC: 2

25 Jan 2011

5340-20-006-5409
Mounting Bracket

200065409
AC15172-91: RNCC: 3 | RNVC: 2

13 Oct 2011

5340-20-005-5726
Lock-Release Lever

200055726
AC16040-02-01: RNCC: 3 | RNVC: 2

14 May 2010

5340-20-005-1158
Angle Bracket

200051158
10675656-011PW: RNCC: 3 | RNVC: 2

20 Oct 2009

5340-20-000-8730
Mounting Bracket

200008730
10624951-PW: RNCC: 3 | RNVC: 2
10624951: RNCC: D | RNVC: 9

3 Jul 2003

5340-21-908-0684
General Purpose Resilient Mount

219080684
316-008: RNCC: 3 | RNVC: 2

4 Apr 1991

5340-21-114-7412

5340-21-004-6618

5340-21-914-7444
Mounting Plate

219147444
VC-97-00562: RNCC: 3 | RNVC: 2

21 May 1998

5340-20-006-8863
Locking Stay

200068863
215-40047-8: RNCC: 3 | RNVC: 2

9 May 2012

5340-21-913-6446
Tubular Fairlead

219136446
6346C322-1: RNCC: 3 | RNVC: 2

22 Dec 1996

5340-21-906-7492
Mounting Bracket

219067492
CF 349 747 A: RNCC: 3 | RNVC: 2

11 May 1989

5340-20-000-5367
Turnbuckle

200005367
800-0022-01: RNCC: 3 | RNVC: 2

10 Jan 2003

5340-20-002-4092
Angle Bracket

200024092
130014DE410-1: RNCC: 3 | RNVC: 2
130014DE410: RNCC: D | RNVC: 9

15 Dec 2005

5340-21-914-1602
Spring Tension Clip

219141602
S1315-24: RNCC: 3 | RNVC: 2

14 Jun 1997

5340-20-006-0006
Mounting Bracket

200060006
82520987-003: RNCC: 3 | RNVC: 2

17 Dec 2010

5340-20-006-3730
Mounting Bracket

200063730
85420037-109: RNCC: 3 | RNVC: 2

22 Jun 2011

5340-21-863-4237
Pipe Bracket

218634237
460-3409: RNCC: 3 | RNVC: 2

16 Dec 1971

5340-21-112-3501

5340-21-840-9340

5340-21-840-9316

5340-21-888-1958
Caster Stem Socket

218881958
R1: RNCC: 3 | RNVC: 2

8 Mar 1982

5340-21-868-9210
Snap Hook

218689210
MH56: RNCC: 3 | RNVC: 2

29 May 1974

5340-20-006-0780
Double Angle Bracket

200060780
82510289-001: RNCC: 3 | RNVC: 2

27 Jan 2011

5340-21-660-0862
Glazier Point

216600862
3: RNCC: 3 | RNVC: 1
160-6353: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-859-0016
Spring Tension Clip

218590016
80-3: RNCC: 3 | RNVC: 2

16 Apr 1970

5340-21-905-5042
Key

219055042
199335-1: RNCC: 3 | RNVC: 2
00V: RNCC: 5 | RNVC: 1

20 May 1988

5340-21-897-8091
Nonmetallic Bumper

218978091
618-7938-001: RNCC: 3 | RNVC: 2

2 Dec 1984

5340-21-897-8243
Cane Bolt

218978243
8282056-1: RNCC: 3 | RNVC: 2
9425-5020: RNCC: 5 | RNVC: 2

13 Dec 1984

5340-21-913-3016
Access Cover

219133016
704-137207-001-0: RNCC: 3 | RNVC: 2
704-137207-000-0: RNCC: 6 | RNVC: 9
F300 0T 019 0805: RNCC: 6 | RNVC: 9

13 Feb 1997

5340-20-006-8509
Loop Clamp

200068509
A22200-0150-1: RNCC: 3 | RNVC: 2

18 Apr 2012

5340-21-913-4702
Mounting Plate

219134702
10627018-PW: RNCC: 3 | RNVC: 2
10627018: RNCC: D | RNVC: 9

11 Aug 1998

5340-21-911-8258
Angle Bracket

219118258
9117077: RNCC: 3 | RNVC: 2

12 Mar 1994

5340-21-908-4729
Retaining Strap

219084729
CF 819 001 A: RNCC: 3 | RNVC: 2

12 Sep 1992

5340-21-880-7868
Electrical-Mechanical Equipment Post

218807868
122329-1: RNCC: 3 | RNVC: 2

12 Mar 1980

5340-21-880-7026
Electrical-Mechanical Equipment Post

218807026
506455-1: RNCC: 3 | RNVC: 2

19 Jun 1979

5340-21-865-9897
Locking Plate

218659897
200-10-195: RNCC: 3 | RNVC: 2
D63-21: RNCC: 3 | RNVC: 2

19 May 1972

5340-20-004-3613
Rail Extension

200043613
10671008-001: RNCC: 3 | RNVC: 2

21 Oct 2008

5340-21-851-4432
Flush Catch

218514432
H120P-1-080-267: RNCC: 3 | RNVC: 2
H120P1-080-267: RNCC: 3 | RNVC: 2

6 Oct 1968

5340-21-905-5741
Padlock Set

219055741
22011/50(75 LOCKS): RNCC: 3 | RNVC: 2
22011/50: RNCC: 5 | RNVC: 1

29 Sep 1989

5340-21-911-9605
Angle Bracket

219119605
704-134000-920-0: RNCC: 3 | RNVC: 2

27 Oct 1994

5340-20-004-3691
Mounting Bracket

200043691
ID-121-113: RNCC: 3 | RNVC: 2

24 Oct 2008

5340-21-904-9263
Access Cover

219049263
701-141901-004-0: RNCC: 3 | RNVC: 2

7 Apr 1989

5340-20-000-2516
Strap Fastener Loop

200002516
9379892-1: RNCC: 3 | RNVC: 2

27 Jun 2002

5340-21-908-3889
Detent Plunger

219083889
9775367-1: RNCC: 3 | RNVC: 2
IGDS9174: RNCC: 3 | RNVC: 2
9775367: RNCC: D | RNVC: 9

11 Feb 1992

5340-21-891-6765
Nonmetallic Bumper

218916765
6262054: RNCC: 3 | RNVC: 2

11 Jun 1983

5340-21-815-2591

5340-21-870-9488
Electrical-Mechanical Equipment Post

218709488
1831-275: RNCC: 3 | RNVC: 2

13 Jan 1976

5340-20-000-3974
Mounting Bracket

200003974
10655852-011PW: RNCC: 3 | RNVC: 2

13 Sep 2002

5340-20-000-5107
Tie Down

200005107
0275213-001: RNCC: 3 | RNVC: 2

8 Nov 2002

5340-20-002-8349
Bracket (Nvis)

200028349
318-800087-7: RNCC: 3 | RNVC: 2

14 Jul 2006

5340-21-888-1637
Slide And Power Tra

218881637
L335000036: RNCC: 3 | RNVC: 2

12 Feb 1982

5340-21-905-5657
Webbing Strap

219055657
8277151-1: RNCC: 3 | RNVC: 2

18 Aug 1989

5340-21-908-5175
Mounting Bracket

219085175
NTOC3007: RNCC: 3 | RNVC: 2

24 Feb 1993

5340-20-006-0266
Mounting Bracket

200060266
82550617-103: RNCC: 3 | RNVC: 2

23 Dec 2010

5340-20-000-8397
Access Cover

200008397
10625274-PW: RNCC: 3 | RNVC: 2
10625274: RNCC: D | RNVC: 9

17 Jun 2003

5340-20-003-1796
Mounting Bracket

200031796
87110024-001: RNCC: 3 | RNVC: 2

29 Jan 2007

5340-21-911-1378
Mounting Bracket

219111378
8103-32: RNCC: 3 | RNVC: 2

10 Dec 1993

5340-20-002-1010
Air Inlet-Outlet Frame

200021010
GC432-0013-1: RNCC: 3 | RNVC: 2

1 Jun 2005

5340-21-798-4577
Swivel Caster

217984577
91010-2R450: RNCC: 3 | RNVC: 2

26 Mar 1965

5340-20-006-1679
Mounting Plate

200061679
82820124-105: RNCC: 3 | RNVC: 2

16 Mar 2011

5340-20-004-8408
Mounting Plate

200048408
542833-1: RNCC: 3 | RNVC: 2
0975106-1: RNCC: 5 | RNVC: 2

27 May 2009

5340-20-008-0319
Angle Bracket

200080319
0976582-1: RNCC: 3 | RNVC: 2

21 Oct 2013

5340-21-884-0892
Swivel Caster

218840892
PNA2222AC: RNCC: 3 | RNVC: 2
NA2222AC: RNCC: 3 | RNVC: 2

12 May 1981

5340-21-913-8802
Block Clamp

219138802
215-90652: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-21-109-8234

5340-21-848-4545

5340-20-002-0230
Headless Straight Rod

200020230
1237-337-1: RNCC: 3 | RNVC: 2
1284-8 ITEM 5: RNCC: 6 | RNVC: 9
1237-337 P/N 1237-337-1: RNCC: D | RNVC: 9

9 May 2005

5340-21-908-4065
Access Cover

219084065
TE20002344-001: RNCC: 3 | RNVC: 2

25 Apr 1992

5340-20-006-3824
Loop Clamp

200063824
83210059-003: RNCC: 3 | RNVC: 2

24 Jun 2011

5340-20-006-0732
Mounting Plate

200060732
82510050-101: RNCC: 3 | RNVC: 2

25 Jan 2011

5340-21-908-4115
Extension Drawer Slide

219084115
9160892-04: RNCC: 3 | RNVC: 2

7 May 1992

5340-21-870-9480
Loop Clamp

218709480
344728: RNCC: 3 | RNVC: 2

13 Jan 1976

5340-21-866-9138
Hinged Hasp

218669138
0844: RNCC: 3 | RNVC: 2

16 Jun 1972

5340-21-908-0689
Retaining Strap

219080689
10552537: RNCC: 3 | RNVC: 2

5 Apr 1991

5340-21-908-0548
Access Cover

219080548
10552926: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-21-913-0738
Mounting Plate

219130738
9481347-100: RNCC: 3 | RNVC: 2

13 Mar 1996

5340-20-005-7520
Rim Latch

200057520
TE20010010-200: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-20-006-0238
Angle Bracket

200060238
0656-034051-03: RNCC: 3 | RNVC: 2

22 Dec 2010

5340-21-921-4722
General Purpose Access Door

219214722
B61000-182-1: RNCC: 3 | RNVC: 2

27 Nov 2001

5340-21-921-4832
Webbing Strap

219214832
B51001-016-1: RNCC: 3 | RNVC: 2

4 Dec 2001

5340-21-859-0276
Butt Hinge

218590276
840: RNCC: 3 | RNVC: 1
840-1 X 1: RNCC: 3 | RNVC: 2
69GP1: RNCC: 4 | RNVC: 1

16 Apr 1970

5340-20-005-3395
Lever Bracket

200053395
82710093-005: RNCC: 3 | RNVC: 2

19 Feb 2010

5340-20-000-4606
Mounting Bracket

200004606
10656963-001PEW: RNCC: 3 | RNVC: 2
10656963: RNCC: D | RNVC: 9

15 Oct 2002

5340-21-886-2524
Bow Handle

218862524
1041-12: RNCC: 3 | RNVC: 2
B1041-12: RNCC: 3 | RNVC: 2

11 Aug 1981

5340-20-004-0709
Corrosion Preventive Anode

200040709
CMZ3B-S: RNCC: 3 | RNVC: 2

30 Apr 2008

5340-20-008-1215
Mounting Bracket

200081215
10706610-011: RNCC: 3 | RNVC: 2
10706610: RNCC: D | RNVC: 9

21 Nov 2013

5340-20-004-5961
Stabilizer Slide

200045961
300234-701: RNCC: 3 | RNVC: 2
300234: RNCC: 5 | RNVC: 1

23 Feb 2009

5340-20-000-4551
Webbing Strap

200004551
8603-2: RNCC: 3 | RNVC: 2
10552744-2: RNCC: 5 | RNVC: 2
8603: RNCC: D | RNVC: 9

11 Oct 2002

5340-20-001-6322
Mounting Bracket

200016322
10658553-011PEG: RNCC: 3 | RNVC: 2
10658553-011PG: RNCC: 5 | RNVC: 9
10658553: RNCC: D | RNVC: 9

22 Sep 2004

5340-21-910-8851
Mounting Bracket

219108851
702-139104-908-0: RNCC: 3 | RNVC: 2

7 Aug 1993

5340-20-004-7434
Mounting Bracket

200047434
541441-1: RNCC: 3 | RNVC: 2
541441: RNCC: 5 | RNVC: 1

15 Apr 2009

5340-20-012-2525
Retaining Strap

5340-21-912-3252
Retaining Clip

219123252
214203-1: RNCC: 1 | RNVC: 2
12791: RNCC: 3 | RNVC: 2

10 Mar 1995

5340-21-901-8748
Buckle

219018748
AED63932-1: RNCC: 3 | RNVC: 2

21 Oct 1987

5340-21-879-5276
Antipilferage Seal

218795276
PR1035: RNCC: 3 | RNVC: 1
PR0NGL0K 4: RNCC: 5 | RNVC: 1

27 Jun 1978

5340-20-004-5607
Bumper

200045607
0877844-2: RNCC: 3 | RNVC: 2

11 Feb 2009

5340-20-001-8314
Mounting Bracket

200018314
GM324-3052-1: RNCC: 3 | RNVC: 2
GM324-3052: RNCC: D | RNVC: 9

18 Jan 2005

5340-20-006-7234
Helical Compression Spring Retainer

200067234
F1530-3 ITEM 14: RNCC: 3 | RNVC: 2
SML001106: RNCC: 5 | RNVC: 2
F-1530-3 ITEM 14: RNCC: 5 | RNVC: 2

9 Feb 2012

5340-20-000-9008
Access Cover

200009008
200H-0101-0: RNCC: 3 | RNVC: 2

18 Jul 2003

5340-20-007-8561
Retaining Strap

200078561
7007-1132-1: RNCC: 3 | RNVC: 2

27 Aug 2013

5340-21-914-0842
Anchor Strap

219140842
420-876-745: RNCC: 3 | RNVC: 2
F300 0T 019 4530: RNCC: 6 | RNVC: 9

30 Apr 1997

5340-21-886-5811
Expansion Shield

218865811
JS12H: RNCC: 3 | RNVC: 2

31 Aug 1981

5340-21-660-1990
Plug Button

216601990
51076: RNCC: 3 | RNVC: 2
SS51076: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-847-5911
Flush Lock

218475911
585: RNCC: 3 | RNVC: 2

14 Oct 1971

5340-21-891-6456
General Purpose Resilient Mount

218916456
13025: RNCC: 3 | RNVC: 2

9 Apr 1983

5340-20-002-1674
Frost Plug Adapter

200021674
501 602 0003: RNCC: 3 | RNVC: 2
501 602 0003: RNCC: 5 | RNVC: 2

15 Jul 2005

5340-21-886-8141

5340-21-818-1462

5340-21-818-8061

5340-21-905-5181
Barrel Bolt

219055181
SC1076C4-2: RNCC: 3 | RNVC: 2
SC1076C4-2: RNCC: 3 | RNVC: 2
72-0352: RNCC: 5 | RNVC: 1
04-0571: RNCC: 5 | RNVC: 2

24 Sep 1988

5340-21-814-0747

5340-20-000-3701
Mounting Bracket

200003701
10655867-011PEW: RNCC: 3 | RNVC: 2

28 Aug 2002

5340-20-003-2917
Mechanical Stop

200032917
10668688-001: RNCC: 3 | RNVC: 2

3 Apr 2007

5340-21-908-5277
Turnbuckle

219085277
F0174086-1: RNCC: 3 | RNVC: 2
9277545-1: RNCC: 3 | RNVC: 2
F0174086: RNCC: 6 | RNVC: 9

1 Apr 1993

5340-20-001-4278
Mounting Plate

200014278
9279311-1: RNCC: 3 | RNVC: 2
9279311: RNCC: D | RNVC: 9

12 May 2004

5340-21-866-9031
Tee Hinge

218669031
RW03X1-16: RNCC: 3 | RNVC: 2

16 Jun 1972

5340-21-913-0773
Spacing Threaded Standoff

219130773
C 3822 186 MN: RNCC: 3 | RNVC: 2
DISTIN-4070M-15: RNCC: 3 | RNVC: 2
26019010020: RNCC: 5 | RNVC: 2

12 Apr 1996

5340-20-007-2474
Rod End Connector

200072474
5803: RNCC: 3 | RNVC: 2

7 Nov 2012

5340-20-001-6341
Mounting Bracket

200016341
10658628-011PG: RNCC: 3 | RNVC: 2
10658628: RNCC: D | RNVC: 9

22 Sep 2004

5340-20-000-7479
Rack Mounting Adapt

200007479
0175872-1: RNCC: 3 | RNVC: 2
0175872: RNCC: D | RNVC: 9

2 May 2003

5340-20-003-8545
Slam Lock

200038545
699-1132: RNCC: 3 | RNVC: 2

18 Jan 2008

5340-21-921-0174
Guide.

219210174
06290130: RNCC: 3 | RNVC: 2

30 Jan 2001

5340-21-898-4974
Hinge

218984974
TEC831: RNCC: 3 | RNVC: 2

9 Oct 1985

5340-21-920-1136
Bracket Assembly

219201136
10617337: RNCC: 3 | RNVC: 2

11 May 1999

5340-21-108-5100
Tee Hinge

211085100
904: RNCC: 3 | RNVC: 1
904-4: RNCC: 3 | RNVC: 2
1G51550: RNCC: 6 | RNVC: 9
131-8494: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-660-0283
Butt Hinge

216600283
472: RNCC: 3 | RNVC: 1
472-3: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-007-6236
Mounting Bracket

200076236
10686407-001PG: RNCC: 3 | RNVC: 2
10686407: RNCC: D | RNVC: 9

1 May 2013

5340-21-920-0408
Track Stop

219200408
10616708-1: RNCC: 3 | RNVC: 2

20 Mar 1999

5340-21-908-3966
Mounting Plate

219083966
702-139200-917-0: RNCC: 3 | RNVC: 2

22 Mar 1992

5340-20-003-8751
Mounting Plate

200038751
0477257-1: RNCC: 3 | RNVC: 2

30 Jan 2008

5340-21-888-7697
Caster Wheel

218887697
FP0820B: RNCC: 3 | RNVC: 2
FP0820B: RNCC: 3 | RNVC: 2

27 Mar 1982

5340-21-108-9411

5340-20-003-1926
Weldment Rack

200031926
541300: RNCC: 3 | RNVC: 2
541300: RNCC: 5 | RNVC: 1

7 Feb 2007

5340-21-814-4530

5340-20-007-6607
Mounting Bracket

200076607
SP2200KIT: RNCC: 3 | RNVC: 2

22 May 2013

5340-21-819-6116
Butt Hinge

218196116
AN257-1-7200: RNCC: 3 | RNVC: 2

25 May 1967

5340-21-897-8227
Bracket Retaining

218978227
8477335: RNCC: 3 | RNVC: 2
J01-100-0: RNCC: 5 | RNVC: 2

12 Dec 1984

5340-20-004-7069
Mounting Bracket

200047069
B30603-254-1: RNCC: 3 | RNVC: 2
B30603-254: RNCC: 5 | RNVC: 1

27 Mar 2009

5340-21-908-0423
Tubular Fairlead

219080423
CPFME2278-1: RNCC: 3 | RNVC: 2
ME2278-1: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-21-920-8289
Crank Handle

219208289
9780917-1: RNCC: 3 | RNVC: 2
9780917-1: RNCC: 5 | RNVC: 2

6 Oct 2000

5340-21-891-6077
Double Angle Bracket

218916077
8280969: RNCC: 3 | RNVC: 2
16001002600-2: RNCC: 6 | RNVC: 9

28 Feb 1983

5340-20-000-4550
Mounting Bracket

200004550
10656592-001PW: RNCC: 3 | RNVC: 2

10 Oct 2002

5340-20-001-1628
Access Cover

200011628
10656059-001PEG: RNCC: 3 | RNVC: 2

2 Dec 2003

5340-20-001-6523
Block Clamp

200016523
193-83013-1: RNCC: 3 | RNVC: 2
193-83013: RNCC: D | RNVC: 9

6 Oct 2004

5340-21-878-7196
Access Cover

218787196
10501004: RNCC: 3 | RNVC: 2
24017000-04: RNCC: 3 | RNVC: 2

21 Feb 1978

5340-20-005-6290
Angle Bracket

200056290
AC86590-07: RNCC: 3 | RNVC: 2

28 May 2010

5340-20-004-9861
Mounting Plate

200049861
626-800758-000: RNCC: 3 | RNVC: 2

28 Jul 2009

5340-20-006-3535
Multiple Angle Bracket

200063535
AC86691-04: RNCC: 3 | RNVC: 2

16 Jun 2011

5340-21-921-7376
Angle Bracket

219217376
10652923-001PW: RNCC: 3 | RNVC: 2

4 Mar 2002

5340-20-000-0203
Angle Bracket

200000203
10655421-001PW: RNCC: 3 | RNVC: 2

11 Apr 2002

5340-20-000-4433
Mounting Bracket

200004433
10656601-011PEW: RNCC: 3 | RNVC: 2
10656601: RNCC: D | RNVC: 9

8 Oct 2002

5340-20-000-4503
Mounting Bracket

200004503
10656951-001PEW: RNCC: 3 | RNVC: 2
10656951: RNCC: D | RNVC: 9

9 Oct 2002

5340-20-001-6797
Seal Retaining Plate

200016797
3058600-01: RNCC: 3 | RNVC: 2

26 Oct 2004

5340-21-921-3548
Double Angle Bracket

219213548
9378945-1: RNCC: 3 | RNVC: 2
9378945: RNCC: 6 | RNVC: 9

17 Oct 2001

5340-20-005-0810
Mounting Bracket

200050810
B51007-233-1: RNCC: 3 | RNVC: 2

30 Sep 2009

5340-21-921-1470
Key Blank

219211470
DA-05053-01/GR-4: RNCC: 3 | RNVC: 2

14 May 2001

5340-21-868-9768
Clevis

218689768
205-050-123-005: RNCC: 3 | RNVC: 2
205-050-123-5: RNCC: 5 | RNVC: 2

29 Oct 1974

5340-21-921-1224
Access Cover

219211224
24-0382: RNCC: 3 | RNVC: 2

27 Apr 2001

5340-21-880-7842
Electrical-Mechanical Equipment Post

218807842
601114-01: RNCC: 3 | RNVC: 2

26 Mar 1980

5340-21-868-9838
Mortise Lock Set

218689838
WH1990C4: RNCC: 3 | RNVC: 2
5340-5380: RNCC: 6 | RNVC: 9

17 Dec 1974

5340-21-852-9310
Friction Catch

218529310
R220: RNCC: 3 | RNVC: 2

24 Feb 1969

5340-21-001-3600
Key And Lamp Escutc

210013600
D55405C: RNCC: 3 | RNVC: 2

21 Mar 1968

5340-21-801-1669
Toggle Assy Nose Co

218011669
750123: RNCC: 3 | RNVC: 2

5 Sep 1963

5340-21-893-8853
Rod End Clevis

218938853
50940: RNCC: 3 | RNVC: 2

26 Nov 1983

5340-21-850-9611
Rim Clenching Clamp

218509611
123492-1: RNCC: 3 | RNVC: 2

19 May 1972

5340-21-910-8919
Access Cover

219108919
9278780-1: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-20-001-9420
Webbing Strap

200019420
10606970-1: RNCC: 3 | RNVC: 2
10606970: RNCC: D | RNVC: 9

16 Mar 2005

5340-20-005-2702
Mounting Plate

200052702
10678295-001PEG: RNCC: 3 | RNVC: 2

22 Jan 2010

5340-21-897-8199
Tiedown Strap

218978199
FE13702CA100: RNCC: 3 | RNVC: 2
W0094-59: RNCC: 3 | RNVC: 2

12 Dec 1984

5340-21-914-2725
Mounting Bracket

219142725
WQ 410 151-T: RNCC: 3 | RNVC: 2
590.23.21.A: RNCC: 5 | RNVC: 2

9 Jul 1997

5340-21-910-8781
Mounting Plate

219108781
8461956-1: RNCC: 3 | RNVC: 2

9 Jul 1993

5340-21-905-5251
Swivel Caster

219055251
1-4356-615: RNCC: 3 | RNVC: 2

29 Oct 1988

5340-20-000-2541
Mounting Bracket

200002541
9379102-5: RNCC: 3 | RNVC: 2

28 Jun 2002

5340-21-878-0034
Spring Tension Clip

218780034
T9546: RNCC: 3 | RNVC: 2

6 Dec 1977

5340-21-905-5591
Flat Mounting Plate

219055591
CF 429 386 A: RNCC: 3 | RNVC: 2

14 Jun 1989

5340-21-905-5562
Angle Bracket

219055562
CF 814 019 A: RNCC: 3 | RNVC: 2

17 May 1989

5340-21-660-1352
Rigid Caster

216601352
14-75SD: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-000-0194
Angle Bracket

200000194
10655302-001PW: RNCC: 3 | RNVC: 2

11 Apr 2002

5340-20-006-4176
Spacing Threaded Standoff

200064176
AC86395-02-06-09: RNCC: 3 | RNVC: 2

14 Jul 2011

5340-21-913-8800
Mounting Plate

219138800
345-83011-1N: RNCC: 3 | RNVC: 2

19 Mar 1997

5340-20-006-3528
Multiple Angle Bracket

200063528
AC86291-02: RNCC: 3 | RNVC: 2

16 Jun 2011

5340-21-921-6523
Angle Bracket

219216523
10655040-001PW: RNCC: 3 | RNVC: 2

13 Feb 2002

5340-21-911-1158

5340-21-893-7960

5340-21-921-3634
Angle Bracket

219213634
10652455-001PW: RNCC: 3 | RNVC: 2

19 Oct 2001

5340-21-913-4550
Mounting Bracket

219134550
10555933: RNCC: 3 | RNVC: 1
10555933-PG: RNCC: 5 | RNVC: 2

3 Jul 1998

5340-20-000-0204
Angle Bracket

200000204
10656484-001PEW: RNCC: 3 | RNVC: 2

11 Apr 2002

5340-20-000-3493
Angle Bracket

200003493
10657123-011PEW: RNCC: 3 | RNVC: 2

21 Aug 2002

5340-20-006-9569
Angle Bracket

200069569
E078-P021-DX: RNCC: 3 | RNVC: 2

12 Jun 2012

5340-21-921-3646
Retaining Strap

219213646
10652459-001PW: RNCC: 3 | RNVC: 2

19 Oct 2001

5340-20-000-3451
Access Cover

200003451
10651939-011: RNCC: 3 | RNVC: 2

19 Aug 2002

5340-20-000-1079
Bumper

200001079
M17-27406-D/023: RNCC: 3 | RNVC: 2
229-10048: RNCC: 5 | RNVC: 2

7 May 2002

5340-20-008-1577
Mounting Bracket

200081577
0677616-1: RNCC: 3 | RNVC: 2
0677616: RNCC: D | RNVC: 9

4 Dec 2013

5340-21-660-0255
Butt Hinge

216600255
2501E8 2 1/2 X 1 3/4: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-006-6227
Mounting Plate

200066227
27650-01: RNCC: 3 | RNVC: 2

7 Dec 2011

5340-21-814-1343
Friction Catch

218141343
3-1-2: RNCC: 3 | RNVC: 2

13 Jun 1964

5340-21-914-9186
Breather Assembly

219149186
9378163-1: RNCC: 3 | RNVC: 2

24 Oct 1998

5340-21-908-0573
Detent Plunger

219080573
06283975: RNCC: 3 | RNVC: 2

29 Jan 1991

5340-21-660-0240
Butt Hinge

216600240
804: RNCC: 3 | RNVC: 1
804-4 IN: RNCC: 3 | RNVC: 2
804 4 X 4: RNCC: 3 | RNVC: 2
131-7859: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-921-7156
Mounting Plate

219217156
10654453-001PW: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-21-913-8880
Nut And Bolt Retainer

219138880
K215-87501-4: RNCC: 3 | RNVC: 2

20 Mar 1997

5340-21-920-0407
Track Stop

219200407
10616708-2: RNCC: 3 | RNVC: 2

20 Mar 1999

5340-20-006-5743
Blank Panel

200065743
1025501: RNCC: 3 | RNVC: 2
HSA005906: RNCC: 5 | RNVC: 2
1025501: RNCC: 5 | RNVC: 2
0010-2-5-5-00: RNCC: D | RNVC: 9

1 Nov 2011

5340-21-901-8981
Door Closer

219018981
16-1-92-35A49B49: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-20-004-1677
Mounting Bracket

200041677
0689007-1: RNCC: 3 | RNVC: 2

12 Jun 2008

5340-21-848-4510
Butt Hinge

218484510
BB241N5: RNCC: 3 | RNVC: 1
BB241N5-3 1/2 X 3 1/2: RNCC: 3 | RNVC: 2
BB241C15-3 1/2 X 3 1/2: RNCC: 3 | RNVC: 2
69GP1: RNCC: 4 | RNVC: 1

6 Jun 1968

5340-21-660-0294
Strap Hinge

216600294
900RBP: RNCC: 3 | RNVC: 1
900RBP-5: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-007-8701
Mounting Plate

200078701
10705984-001: RNCC: 3 | RNVC: 2

4 Sep 2013

5340-21-846-1568
Key Blank

218461568
H64: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-008-0316
Mounting Bracket

200080316
0976565-1: RNCC: 3 | RNVC: 2

21 Oct 2013

5340-20-004-9586
Retaining Strap

200049586
0778990-1: RNCC: 3 | RNVC: 2

16 Jul 2009

5340-21-905-5925
Retaining Strap

219055925
CF 819 114 A: RNCC: 3 | RNVC: 2

10 Mar 1990

5340-21-905-5484
Mounting Bracket

219055484
127566-1/8-AL: RNCC: 3 | RNVC: 2

21 Apr 1989

5340-21-915-0139
Mounting Bracket

219150139
10616861: RNCC: 3 | RNVC: 2

28 Apr 1999

5340-20-002-7496
Stand Base

200027496
PWC38140: RNCC: 3 | RNVC: 2

2 Jun 2006

5340-20-005-3021
Mounting Plate

200053021
0778046-1: RNCC: 3 | RNVC: 2

12 Feb 2010

5340-20-002-0918
Access Door Hinge

200020918
GC218-0031-7: RNCC: 3 | RNVC: 2

31 May 2005

5340-21-868-8488
Butt Hinge Leaf

218688488
C5WM12183-27: RNCC: 3 | RNVC: 2

16 Aug 1973

5340-20-000-8294
Access Cover

200008294
10626124-PW: RNCC: 3 | RNVC: 2
10626124: RNCC: D | RNVC: 9

12 Jun 2003

5340-21-864-2437
Dust And Moisture Seal Protective Cap-Plug

218642437
FC12: RNCC: 3 | RNVC: 1
FC12: RNCC: 3 | RNVC: 1
FC12: RNCC: 3 | RNVC: 2

17 Feb 1972

5340-21-851-3224
Handle

218513224
06571: RNCC: 3 | RNVC: 2

6 Oct 1968

5340-21-845-7673
Loop Clamp

218457673
1710269: RNCC: 3 | RNVC: 2

5 Jun 1968

5340-21-886-2024
Rod End Connector

218862024
4736: RNCC: 3 | RNVC: 2

2 Jun 1981

5340-21-868-8779
Barrel Bolt

218688779
SC1078C14: RNCC: 3 | RNVC: 1

18 Oct 1973

5340-21-913-6551
Locking Stay

5340-21-842-9530
Mounting Bracket

218429530
303424: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-876-2198
Compression Cup

218762198
CB1546-20: RNCC: 3 | RNVC: 2

20 Sep 1977

5340-21-896-3071
Latch Wire

218963071
45-182: RNCC: 3 | RNVC: 2

13 May 1984

5340-20-000-3542
Access Cover

200003542
10656693-011PEW: RNCC: 3 | RNVC: 2

21 Aug 2002

5340-21-840-9115
Barrel Bolt

218409115
69GP6: RNCC: 3 | RNVC: 1
1076 1/4J-2: RNCC: 3 | RNVC: 2
1076 1/4J-2: RNCC: 3 | RNVC: 2
130-2652: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-000-8900
Angle Bracket

200008900
10656315-001: RNCC: 3 | RNVC: 2
10656315: RNCC: D | RNVC: 9

10 Jul 2003

5340-20-005-1382
Multiple Angle Bracket

200051382
A20618-280-1: RNCC: 3 | RNVC: 2

2 Nov 2009

5340-20-005-4367
Mounting Plate

200054367
B30400-027-7: RNCC: 3 | RNVC: 2

12 Apr 2010

5340-20-004-0560
Friction Catch

200040560
0377486-1: RNCC: 3 | RNVC: 2

25 Apr 2008

5340-21-800-2982
Swivel Caster

218002982
A72RS: RNCC: 3 | RNVC: 2

4 Jun 1968

5340-21-848-0741
Swivel Caster

218480741
FRS47L: RNCC: 3 | RNVC: 2
34315: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-905-5966
Mounting Bracket

219055966
704-184400-906-0: RNCC: 3 | RNVC: 2

28 Apr 1990

5340-20-006-0348
Spigot Assy

200060348
82520684-001: RNCC: 3 | RNVC: 2

4 Jan 2011

5340-20-000-9444
Access Cover

200009444
10652458-011PEG: RNCC: 3 | RNVC: 2

12 Aug 2003

5340-21-897-8574
Clinder Lock Cam

218978574
K510-208: RNCC: 3 | RNVC: 2

6 Feb 1985

5340-21-888-7539
Swivel Caster

218887539
PPL2526BC-T: RNCC: 3 | RNVC: 2

14 Mar 1982

5340-20-000-9343
Mounting Bracket

200009343
10638507-PEG: RNCC: 3 | RNVC: 2

7 Aug 2003

5340-20-005-0912
Angle Bracket

200050912
0989080: RNCC: 3 | RNVC: 2

5 Oct 2009

5340-21-884-0201
Expansion Shield

218840201
38520: RNCC: 3 | RNVC: 2
5842: RNCC: 3 | RNVC: 2

12 Dec 1980

5340-21-866-9542
Rod Threaded Socket

218669542
110R: RNCC: 3 | RNVC: 1
110R-3/8GALV: RNCC: 3 | RNVC: 2

14 Jul 1972

5340-20-007-3762
Blank Panel

200073762
10705054-011PW: RNCC: 3 | RNVC: 2
10705054: RNCC: D | RNVC: 9

9 Jan 2013

5340-20-000-1578
Mounting Bracket

200001578
9379191-1: RNCC: 3 | RNVC: 2

16 May 2002

5340-21-905-5862
Mounting Bracket

219055862
CF 342 448 A: RNCC: 3 | RNVC: 2

10 Feb 1990

5340-20-003-9006
Mounting Bracket

200039006
RXWMCPU31-S: RNCC: 3 | RNVC: 2

12 Feb 2008

5340-21-880-7354
Butt Hinge Leaf

218807354
6-027219-C1: RNCC: 3 | RNVC: 2
219-10017-4: RNCC: 3 | RNVC: 2

11 Sep 1979

5340-21-901-8899
Strapping

219018899
SUSPENSIONSTRAP 1/2IN. STEEL: RNCC: 3 | RNVC: 1
1/2 IN. BY 25 FT: RNCC: 3 | RNVC: 2

18 Feb 1988

5340-21-108-9705
Safety Hook

211089705
WY3249: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-859-0709
Friction Catch

218590709
707N: RNCC: 3 | RNVC: 2
69GP8: RNCC: 4 | RNVC: 1

14 May 1970

5340-21-891-5424
Caster Wheel

218915424
10X2.5ADIRYY: RNCC: 3 | RNVC: 2

19 Dec 1982

5340-20-003-8565
Strap Kit

200038565
10672409-011: RNCC: 3 | RNVC: 2

21 Jan 2008

5340-20-002-5703
Cover Assembly

200025703
7404-005-1: RNCC: 3 | RNVC: 2

16 Mar 2006

5340-20-000-2340
Mounting Plate

200002340
9379025-1: RNCC: 3 | RNVC: 2

20 Jun 2002

5340-20-008-0539
Threaded Rod End

200080539
150-583-1: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-21-877-3752
Retaining Strap

218773752
4163: RNCC: 3 | RNVC: 2

8 Nov 1977

5340-21-814-0497

5340-21-913-3015
Mounting Bracket

219133015
704-132202-001-0: RNCC: 3 | RNVC: 2

13 Feb 1997

5340-21-874-3900
Strap Hanger

218743900
VF1SHR: RNCC: 3 | RNVC: 2
161-532: RNCC: 3 | RNVC: 2
VF-1-SHR: RNCC: 3 | RNVC: 2

19 Apr 1977

5340-21-660-2281
Flat Bonding Strip

216602281
GR9E02-0020142-01: RNCC: 3 | RNVC: 1
9900SK390: RNCC: 3 | RNVC: 2

30 Nov 1965

5340-20-007-6356
Angle Bracket

200076356
87610276-101: RNCC: 3 | RNVC: 2

8 May 2013

5340-20-000-5135
Webbing Strap

200005135
10638454-80: RNCC: 3 | RNVC: 2
10638454: RNCC: 6 | RNVC: 9

21 Nov 2002

5340-21-914-5283
Nut And Bolt Locking Plate

219145283
DP3-085: RNCC: 3 | RNVC: 2
OEM 085: RNCC: 5 | RNVC: 9

21 Aug 1998

5340-21-921-6949
Mounting Bracket

219216949
10652316-011PG: RNCC: 3 | RNVC: 2

21 Feb 2002

5340-20-001-4346
Clamping Stud

200014346
9278944-1: RNCC: 3 | RNVC: 2
9278944: RNCC: D | RNVC: 9

19 May 2004

5340-20-003-7616
Assembly Support

200037616
0078287-3: RNCC: 3 | RNVC: 2
0078287: RNCC: 5 | RNVC: 1

4 Dec 2007

5340-20-005-4259
Mounting Plate

200054259
ACS-100-076: RNCC: 3 | RNVC: 2

7 Apr 2010

5340-21-891-6393
Bolt And Bar Assemb

218916393
K110-401: RNCC: 3 | RNVC: 2

9 Apr 1983

5340-20-004-6777
Mounting Plate

200046777
3070068-01: RNCC: 3 | RNVC: 2

12 Mar 2009

5340-21-311-9440
Retaining Strap

213119440
J863-18: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-004-9581
Loop Clamp

200049581
0656-035057-03: RNCC: 3 | RNVC: 2

16 Jul 2009

5340-20-002-8551
Protective Plate

200028551
B40603-061-1: RNCC: 3 | RNVC: 2

21 Jul 2006

5340-20-002-8350
Bracket (Nvis)

200028350
318-800087-21: RNCC: 3 | RNVC: 2

14 Jul 2006

5340-20-002-0325
Hanger Assembly

200020325
0560518-1: RNCC: 3 | RNVC: 2
0560518: RNCC: D | RNVC: 9

10 May 2005

5340-20-003-3468
Manual Control Lever

200033468
GDS 1083: RNCC: 3 | RNVC: 2

8 May 2007

5340-21-914-8577
Headless Straight Rod

219148577
10608545: RNCC: 3 | RNVC: 2

14 Jul 1998

5340-21-848-4636
Flush Lock

218484636
02067: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-003-5623
Mounting Bracket

200035623
10664635-001PW: RNCC: 3 | RNVC: 2
10664635: RNCC: 5 | RNVC: 1

6 Sep 2007

5340-21-862-6168
Expansion Shield

218626168
251-2610: RNCC: 3 | RNVC: 2
2610: RNCC: 3 | RNVC: 2
251-07836: RNCC: 3 | RNVC: 2

16 Sep 1971

5340-21-852-6396
Barrel Bolt

218526396
75021: RNCC: 3 | RNVC: 2

1 Dec 1968

5340-21-914-2622
Rod End Connector

219142622
W3847256L: RNCC: 3 | RNVC: 2

10 Jul 1997

5340-20-006-3638
Mounting Plate

200063638
83210032-101: RNCC: 3 | RNVC: 2

21 Jun 2011

5340-20-001-1146
Loop Clamp

200011146
B0305064-03D30EP: RNCC: 3 | RNVC: 2

6 Nov 2003

5340-20-001-2246
Access Cover

200012246
GD421-7920-1: RNCC: 3 | RNVC: 2

21 Jan 2004

5340-20-000-9010
Filler Opening Cap

200009010
200H-0100-B: RNCC: 3 | RNVC: 2

18 Jul 2003

5340-20-003-2953
Armour Adapter

200032953
B30601-114-1: RNCC: 3 | RNVC: 2

5 Apr 2007

5340-21-905-3543
Mounting Plate

219053543
3-100552: RNCC: 3 | RNVC: 2

5 Aug 1988

5340-21-919-0320
Webbing Strap

219190320
10638459: RNCC: 3 | RNVC: 2
10638459: RNCC: 3 | RNVC: 2

12 Jul 1999

5340-21-908-0566
Mounting Bracket

219080566
03053202: RNCC: 3 | RNVC: 2

29 Jan 1991

5340-21-891-5689
Angle Bracket

218915689
8277059: RNCC: 3 | RNVC: 2

30 Jan 1983

5340-21-874-8479
Webbing Strap

218748479
8437: RNCC: 3 | RNVC: 2

25 Aug 1976

5340-21-913-8886
Mechanical Stop

219138886
215-90528: RNCC: 3 | RNVC: 2

25 Mar 1997

5340-21-868-9961
Swivel Caster

218689961
44GP119TYPE1CLASSB: RNCC: 4 | RNVC: 1

4 Mar 1975

5340-21-818-3999

5340-21-913-0012
Angle Bracket Set

219130012
241-801453-000: RNCC: 3 | RNVC: 2

17 Feb 1996

5340-20-003-7854
Plate

200037854
10662836-001: RNCC: 3 | RNVC: 2
10662836: RNCC: 5 | RNVC: 1

18 Dec 2007

5340-20-004-7365
Mounting Bracket

200047365
542525-2: RNCC: 3 | RNVC: 2
542525: RNCC: 5 | RNVC: 1

8 Apr 2009

5340-21-884-0103
Angle Bracket

218840103
140750-001: RNCC: 3 | RNVC: 2

26 Nov 1980

5340-21-857-9730
Antipilferage Seal

218579730
PR1035: RNCC: 3 | RNVC: 1
PR1035: RNCC: 3 | RNVC: 1
PR0NGL0K4: RNCC: 5 | RNVC: 1

16 Apr 1970

5340-21-311-9562
Clamp Locking Kindo

213119562
J850ALUMINUM: RNCC: 3 | RNVC: 2
J850GK: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-000-4108
Turnbuckle

200004108
150-445: RNCC: 3 | RNVC: 2

19 Sep 2002

5340-20-003-8252
Mounting Plate

200038252
9575154-1: RNCC: 3 | RNVC: 2

8 Jan 2008

5340-21-879-5286
Butt Hinge

218795286
BB660C26D: RNCC: 3 | RNVC: 1
BB660-4-1-2C26D: RNCC: 3 | RNVC: 2

18 Jul 1978

5340-20-004-0019
Door Assembly

200040019
9377012-1: RNCC: 3 | RNVC: 2

2 Apr 2008

5340-20-006-0773
Hinge

200060773
SAM218-3: RNCC: 3 | RNVC: 2

25 Jan 2011

5340-20-004-2430
Angle Bracket

200042430
AC16711-10-02: RNCC: 3 | RNVC: 2

11 Aug 2008

5340-20-002-6418
Mounting Plate

200026418
540994: RNCC: 3 | RNVC: 2

24 Apr 2006

5340-21-908-4822
Mounting Plate

219084822
WW486519-R: RNCC: 3 | RNVC: 2
59.16.153.A: RNCC: 5 | RNVC: 2

24 Oct 1992

5340-21-905-5450
Clamp Locking

219055450
14ML-1: RNCC: 3 | RNVC: 2
14ML-1: RNCC: 3 | RNVC: 2
14ML-1: RNCC: 3 | RNVC: 2

7 Mar 1989

5340-21-912-3331
Metal Grille

219123331
FMP-D-8012-5: RNCC: 3 | RNVC: 2

25 Mar 1995

5340-20-006-0772
Mechanic Equipment Hardware Kit

200060772
1SI0058-60: RNCC: 3 | RNVC: 2

25 Jan 2011

5340-21-908-3660
Catch Strike

219083660
10-11106-01: RNCC: 3 | RNVC: 2

10 Jan 1992

Load More Results