What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

Hardware, Commercial - Canada (CA)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Canada (CA) - NCB is 20 or 21

Page 51 of 64

NSN Format for Hardware, Commercial
Codified by Canada

53	40	21	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Canada (CA)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 190 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 63 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 26 Items
What is a Rod End Connector? 44 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 69 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 226 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 94 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 20 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 582 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 43 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 202 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 65 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Shelf Bracket? 33 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Door Hook And Eye? 22 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 77 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 12 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 23 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 23 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 44 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 13 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is a Friction Catch? 38 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 15 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 39 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 26 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 86 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 20 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 42 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 91 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 57 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 25 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 163 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 101 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 21 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 16 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 288 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 52 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 23 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 131 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 24 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 41 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 70 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 45 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 210 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 163 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 82 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 44 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 38 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 25 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 20 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 42 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 18 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Glazier Point? 10 Items: A Glazier Point (POINT,GLAZIER) is a piece of thin sheet metal, triangular or diamond shaped, designed to hold a pane of glass in a wooden sash.
What is an Angle Bracket? 1105 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 81 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 32 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1130 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 20 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 49 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 37 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Quick Release Plunger? 13 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 114 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flush Catch? 97 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 13 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 86 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 115 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 177 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 24 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 53 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 219 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 40 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 494 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 353 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 55 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 51 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 12 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 601 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 32 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 39 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 34 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 41 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 21 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping? 19 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 93 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 117 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 31 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 45 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 19 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 832 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 35 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 40 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 75 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 106 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Picture Hanger? 10 Items: A Picture Hanger (HANGER,PICTURE) is a hook like device that is secured to walls, bulkheads, columns and the like, by means of a nail, screw, magnet or adhesive backed cloth, that is included with and/or attached to the hook. It is designed to hold and suspend variuos items such as photographs, paintings, maps, documents, etc.
What is a Protection Bellows? 16 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 57 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 49 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 2535 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 19 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 16 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 1222 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 48 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 64 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Threaded Hinged Standoff? 11 Items: A Threaded Hinged Standoff (STANDOFF,HINGED,THREADED) is a standoff, internally and/or externally, threaded on both ends with a hinge or pivot point to allow for independent movement of the ends.
What is a Spacing Threaded Standoff? 178 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 115 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a Crank Handle? 13 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 29 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Mechanic Equipment Hardware Kit? 87 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Dust And Moisture Seal Protective Cover? 38 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 51 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 308 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 41 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 39 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 178 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 27 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 80 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 86 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 51 of 64

5340-21-896-9894
Washer

218969894
80-28: RNCC: 3 | RNVC: 2

11 Nov 1984

5340-20-007-1418
Dust And Moisture Seal Protective Cap

200071418
10672639-002: RNCC: 3 | RNVC: 2
10672639: RNCC: D | RNVC: 9

14 Sep 2012

5340-20-007-4593
Mounting Bracket

200074593
10656856-001: RNCC: 3 | RNVC: 2
10656856: RNCC: D | RNVC: 9

12 Feb 2013

5340-20-006-9492
Loop Clamp

200069492
10681500-001PG: RNCC: 3 | RNVC: 2
10681500: RNCC: D | RNVC: 9

12 Jun 2012

5340-21-905-5892
Mounting Plate

219055892
TE10002632-002: RNCC: 3 | RNVC: 2

22 Feb 1990

5340-21-660-0129
Butt Hinge

216600129
1317: RNCC: 3 | RNVC: 1
1317 2 1/2 X 1 5/8: RNCC: 3 | RNVC: 2
131-7509: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-006-3619
Spring Tension Clip

200063619
83910147-101: RNCC: 3 | RNVC: 2

20 Jun 2011

5340-20-003-9427
Mounting Bracket

200039427
10626954-PW: RNCC: 3 | RNVC: 2

10 Mar 2008

5340-21-913-8801
Filler Opening Cap

219138801
215-30040: RNCC: 3 | RNVC: 2

22 Mar 1997

5340-21-908-4691
Compression Cup

219084691
1756-013: RNCC: 3 | RNVC: 2

6 Sep 1992

5340-20-000-9347
Mounting Bracket

200009347
10655162-011PEW: RNCC: 3 | RNVC: 2

7 Aug 2003

5340-21-921-2859
Access Cover

219212859
FP324689-03: RNCC: 3 | RNVC: 2

23 Aug 2001

5340-20-001-0206
Access Cover

200010206
10657247-011: RNCC: 3 | RNVC: 2

9 Sep 2003

5340-20-006-0690
Butt Hinge

200060690
85320924-001: RNCC: 3 | RNVC: 2

24 Jan 2011

5340-21-868-9510
Rim Lock Set

218689510
02067C3: RNCC: 3 | RNVC: 1
5340-5332: RNCC: 6 | RNVC: 9

20 Aug 1974

5340-20-003-7882
Block

200037882
10665037-003: RNCC: 3 | RNVC: 2
10665037: RNCC: 5 | RNVC: 1

19 Dec 2007

5340-21-900-1307
Kick Door Plate

219001307
2314: RNCC: 3 | RNVC: 1
2314-10X28.5X0.062: RNCC: 3 | RNVC: 2

28 Nov 1985

5340-21-108-9220
Retaining Strap

211089220
LN3: RNCC: 3 | RNVC: 2
06-0035: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-908-5047
Mounting Bracket

219085047
C6E1060-1: RNCC: 3 | RNVC: 2

21 Jan 1993

5340-20-000-1846
Angle Bracket

200001846
9379562-1: RNCC: 3 | RNVC: 2

3 Jun 2002

5340-21-913-8914
Spring Tension Clip

219138914
215-93972-2: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-21-920-9059
Access Cover

219209059
9679329-1: RNCC: 3 | RNVC: 2

9 Nov 2000

5340-21-920-8361
Mounting Bracket

219208361
9780916-1: RNCC: 3 | RNVC: 2
9780916-1: RNCC: 5 | RNVC: 2

11 Oct 2000

5340-21-900-1254
Handle T

219001254
8000R: RNCC: 3 | RNVC: 2

29 Nov 1985

5340-21-879-5695
Loop Clamp

218795695
8340-0098: RNCC: 3 | RNVC: 2
050-917: RNCC: 3 | RNVC: 2
050917: RNCC: 5 | RNVC: 2

23 Jan 1979

5340-20-005-9819
Mounting Bracket

200059819
82521121-001: RNCC: 3 | RNVC: 2

13 Dec 2010

5340-20-002-0942
Access Cover

200020942
GC426-0130-4: RNCC: 3 | RNVC: 2

31 May 2005

5340-21-910-8870
Access Door

219108870
D0AD0600-001: RNCC: 3 | RNVC: 2

17 Aug 1993

5340-21-846-1014
Turnbuckle Body

218461014
6-75104-7: RNCC: 3 | RNVC: 2

19 Apr 1967

5340-21-912-8420
Mounting Plate

219128420
8568148-3: RNCC: 3 | RNVC: 2

28 Sep 1995

5340-21-891-6562
Electrical-Mechanical Equipment Post

218916562
CN2885064-2: RNCC: 3 | RNVC: 2

1 May 1983

5340-20-001-1510
Dust And Moisture Seal Protective Plug

200011510
1100-144: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-21-865-2152
Loop Clamp

218652152
14-198-5A: RNCC: 3 | RNVC: 2

17 Mar 1972

5340-21-890-4665
Screw Thread Insert

218904665
45005: RNCC: 3 | RNVC: 2

18 Oct 1982

5340-21-911-8240
Nonmetallic Bumper

219118240
SJ-5303 021200 634635: RNCC: 3 | RNVC: 2

10 Mar 1994

5340-21-914-2652
Mounting Plate

219142652
021-6176-02: RNCC: 3 | RNVC: 2

9 Jul 1997

5340-20-003-1364
Dust And Moisture Seal Protective Cap

200031364
10664245-001PG: RNCC: 3 | RNVC: 2

8 Jan 2007

5340-21-859-2862
Corr Anode Assembly

218592862
280E20-00017-01-15: RNCC: 3 | RNVC: 2

16 Jul 1970

5340-20-002-4052
Mounting Bracket

200024052
130014DE328-1: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-21-891-5867
Catch Strike

218915867
4502-01R1C 121: RNCC: 3 | RNVC: 2

20 Feb 1983

5340-21-868-8449
Glazier Point

218688449
000: RNCC: 3 | RNVC: 1
5340-5069: RNCC: 6 | RNVC: 9

17 May 1973

5340-20-003-5455
Mounting Bracket

200035455
10639604-PG: RNCC: 3 | RNVC: 2
10639604: RNCC: 5 | RNVC: 1

27 Aug 2007

5340-20-005-5497
Manual Control Lever

200055497
IPL19800-06-15: RNCC: 3 | RNVC: 2

10 May 2010

5340-21-913-0735
Angle Bracket

219130735
9481490-100: RNCC: 3 | RNVC: 2

13 Mar 1996

5340-21-865-9233
Expansion Shield

218659233
6815-2: RNCC: 3 | RNVC: 2

14 Apr 1972

5340-21-868-9584
Expansion Shield

218689584
N97: RNCC: 3 | RNVC: 2

27 Sep 1974

5340-21-912-3221
Mortise Lock

219123221
R2066-7: RNCC: 3 | RNVC: 2

14 Mar 1995

5340-21-814-4386

5340-21-813-4103

5340-21-116-1610

5340-20-007-7683
Cushioning Pad

200077683
10682741-001: RNCC: 3 | RNVC: 2
10682741: RNCC: D | RNVC: 9

11 Jul 2013

5340-20-002-4345
Webbing Strap

200024345
10664193-001: RNCC: 3 | RNVC: 2
10664193: RNCC: D | RNVC: 9

5 Jan 2006

5340-20-003-8605
Strap Kit

200038605
10672410-011: RNCC: 3 | RNVC: 2

22 Jan 2008

5340-21-913-8921
Corner Brace

219138921
022-2131-01: RNCC: 3 | RNVC: 2

9 Jul 1997

5340-21-914-1623
Access Cover

219141623
WW329 974 AU: RNCC: 3 | RNVC: 2
591.30.06.A: RNCC: 5 | RNVC: 2

9 Jul 1997

5340-20-006-4779
Mounting Plate

200064779
85420023-103: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-20-007-3900
Mounting Plate

200073900
10707546-001PW: RNCC: 3 | RNVC: 2
10707546: RNCC: D | RNVC: 9

14 Jan 2013

5340-20-005-3499
Lever Bracket

200053499
82740154-005: RNCC: 3 | RNVC: 2

23 Feb 2010

5340-21-921-5099
Webbing Strap

219215099
B51001-078-1: RNCC: 3 | RNVC: 2

18 Dec 2001

5340-21-874-3911
Turnbuckle

218743911
10-32590: RNCC: 3 | RNVC: 2
G228-1-2-12: RNCC: 3 | RNVC: 2
G228-1-2X12: RNCC: 3 | RNVC: 2
G228-1-2X12IN: RNCC: 3 | RNVC: 2
001-TNB-02P: RNCC: 5 | RNVC: 2

26 Apr 1977

5340-20-000-2368
Mounting Plate

200002368
9380062-1: RNCC: 3 | RNVC: 2

20 Jun 2002

5340-20-005-7502
Mounting Plate

200057502
B30400-121-1: RNCC: 3 | RNVC: 2

28 Jul 2010

5340-21-884-0037
Electrical-Mechanical Equipment Post

218840037
46-54396-46: RNCC: 3 | RNVC: 2

13 Nov 1980

5340-21-908-0457
Rim Clenching Clamp

219080457
1481-H-C18: RNCC: 3 | RNVC: 2
1481C18: RNCC: 3 | RNVC: 2

9 Jan 1991

5340-21-880-7844
Electrical-Mechanical Equipment Post

218807844
601114-03: RNCC: 3 | RNVC: 2

26 Mar 1980

5340-21-921-7392
Access Cover

219217392
10655135-011PW: RNCC: 3 | RNVC: 2

5 Mar 2002

5340-20-004-2445
Block Pivot

200042445
IPL16700-18: RNCC: 3 | RNVC: 2

12 Aug 2008

5340-21-874-3990
Retaining Clip

218743990
1569945: RNCC: 3 | RNVC: 2
6210-1113: RNCC: 6 | RNVC: 9

17 May 1977

5340-21-891-6418
Rigid Caster

218916418
62-VG-06201-R: RNCC: 3 | RNVC: 2

9 Apr 1983

5340-21-920-1135
Block Clamp

219201135
AED 72067-1: RNCC: 3 | RNVC: 2
AED 72067-1: RNCC: 5 | RNVC: 9

12 May 1999

5340-20-006-0386
Angle Bracket

200060386
1SI0176-415: RNCC: 3 | RNVC: 2

5 Jan 2011

5340-21-905-5680
Spring Tension Clip

219055680
8777804: RNCC: 3 | RNVC: 2
8777804: RNCC: 5 | RNVC: 2

30 Aug 1989

5340-21-857-8867
Butt Hinge

218578867
1400: RNCC: 3 | RNVC: 2
69GP1: RNCC: 4 | RNVC: 1

12 Mar 1970

5340-21-908-0884
Pawl Fastener

219080884
37834: RNCC: 3 | RNVC: 2
37834 CAM-E: RNCC: 3 | RNVC: 2
8914263-3: RNCC: 5 | RNVC: 1

11 Jul 1991

5340-21-913-8867
Mounting Plate

219138867
9575903-1: RNCC: 3 | RNVC: 2

18 Mar 1997

5340-21-914-6306
Mounting Bracket

219146306
C6FS2182-1: RNCC: 3 | RNVC: 2

16 Oct 1998

5340-20-006-8409
Mounting Bracket

200068409
10688056: RNCC: 3 | RNVC: 2
10688056-011PW: RNCC: D | RNVC: 9

12 Apr 2012

5340-21-921-4205
Loop Clamp

219214205
ST3368-01: RNCC: 3 | RNVC: 2

7 Nov 2001

5340-20-000-6944
Insert Screw

200006944
627-088: RNCC: 3 | RNVC: 2

8 Apr 2003

5340-20-004-3315
Wear Plate

200043315
B30502-203-1: RNCC: 3 | RNVC: 2

7 Oct 2008

5340-20-006-0228
Mounting Plate

200060228
0656-034088-03: RNCC: 3 | RNVC: 2

22 Dec 2010

5340-20-007-7254
Mounting Plate

200077254
10706400-001PEW: RNCC: 3 | RNVC: 2
10706400: RNCC: D | RNVC: 9

25 Jun 2013

5340-20-002-6058
Angle Bracket

200026058
3107008-01: RNCC: 3 | RNVC: 2

3 Apr 2006

5340-20-006-2199
Angle Bracket

200062199
83221017-101: RNCC: 3 | RNVC: 2

5 Apr 2011

5340-21-920-5316
B Bracket Assembly

219205316
9875079-2: RNCC: 3 | RNVC: 2

23 Feb 2000

5340-21-908-0815
Mounting Bracket

219080815
8860249-1: RNCC: 3 | RNVC: 2

31 May 1991

5340-20-000-1765
Mounting Bracket

200001765
9379348-1: RNCC: 3 | RNVC: 2

30 May 2002

5340-20-003-8438
Mounting Plate

200038438
0678241-1: RNCC: 3 | RNVC: 2

15 Jan 2008

5340-21-913-1377
Clip Assembly

219131377
100A1448-2: RNCC: 3 | RNVC: 2

31 May 1996

5340-21-810-5222
Angle Bracket

218105222
179087-2: RNCC: 3 | RNVC: 2

20 Mar 1964

5340-21-814-4533

5340-20-000-2397
Bow Assembly Brace

200002397
662-800034-000: RNCC: 3 | RNVC: 2

21 Jun 2002

5340-20-001-6604
Nonmetallic Bumper

200016604
10660591-011: RNCC: 3 | RNVC: 2

8 Oct 2004

5340-21-876-7907
Dust And Moisture Seal Boot

218767907
1825C211: RNCC: 3 | RNVC: 2
2530-0161: RNCC: 6 | RNVC: 9

30 Aug 1977

5340-21-868-9770
Rope Cleat

218689770
205-030-325-001: RNCC: 3 | RNVC: 2
205-030-325-1: RNCC: 3 | RNVC: 2

29 Oct 1974

5340-21-921-1651
Door Handle

219211651
167 - 635: RNCC: 3 | RNVC: 2

24 May 2001

5340-21-921-7930
Fr Bracket Assembly

219217930
8381369-1: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-21-868-8335
Spring Tension Clip

218688335
389723-1: RNCC: 3 | RNVC: 2

19 Apr 1973

5340-20-006-9038
Mounting Bracket

200069038
1175049-1: RNCC: 3 | RNVC: 2

17 May 2012

5340-20-002-1370
Mounting Plate

200021370
10556160: RNCC: 3 | RNVC: 2

29 Jun 2005

5340-21-330-0044

5340-21-920-6844
Mounting Bracket

219206844
10649928: RNCC: 3 | RNVC: 2

12 Jun 2000

5340-21-877-3466
Padlock

218773466
33: RNCC: 3 | RNVC: 2

18 Oct 1977

5340-21-848-3509
Loop Clamp

218483509
739-17: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-840-9740
Mortise Lock Set

218409740
AU8080: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-001-8143
Webbing Strap

200018143
C51000-214-1: RNCC: 3 | RNVC: 2
C51000-214: RNCC: D | RNVC: 9

7 Jan 2005

5340-20-003-5519
Access Cover

200035519
10661320-001PW: RNCC: 3 | RNVC: 2
10661320: RNCC: 5 | RNVC: 1

28 Aug 2007

5340-21-860-5019

5340-21-860-5150

5340-21-912-6728
Mounting Bracket

219126728
WW 258 069 R: RNCC: 3 | RNVC: 2

3 Aug 1995

5340-21-905-5638
Pipe Hanger

219055638
704-136100-901-0: RNCC: 3 | RNVC: 2

1 Aug 1989

5340-20-007-5921
Mounting Bracket

200075921
10707753-011PEW: RNCC: 3 | RNVC: 2
10707753: RNCC: D | RNVC: 9

19 Apr 2013

5340-20-000-2800
Access Cover

200002800
10656060-001PG: RNCC: 3 | RNVC: 2

16 Jul 2002

5340-20-000-3563
Lock-Release Lever

200003563
10655877-001PG: RNCC: 3 | RNVC: 2

22 Aug 2002

5340-21-913-6462
Mounting Plate

219136462
714-601016-000: RNCC: 3 | RNVC: 2

1 Jan 1997

5340-20-005-7251
Mounting Plate

200057251
0777756-1: RNCC: 3 | RNVC: 2

13 Jul 2010

5340-21-856-9948
Filler Opening Cap

218569948
0-0: RNCC: 3 | RNVC: 1

12 Feb 1970

5340-21-889-8617
Keying Kit

218898617
0-0: RNCC: 3 | RNVC: 2

4 Oct 1982

5340-21-920-3129
Case Corner

219203129
PK2785: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-21-908-0864
Bow Handle

219080864
N3513 128 4444: RNCC: 3 | RNVC: 2

20 Jun 1991

5340-21-911-1483
Mechanic Equipment Hardware Kit

219111483
NLN-7967A: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-20-006-8418
Access Cover

200068418
10656724: RNCC: 3 | RNVC: 2
10656724-001: RNCC: D | RNVC: 9

12 Apr 2012

5340-21-880-7262
Butt Hinge

218807262
970695-114: RNCC: 3 | RNVC: 2

7 Aug 1979

5340-20-002-8846
Mounting Bracket

200028846
C4CM10391-1: RNCC: 3 | RNVC: 2

14 Aug 2006

5340-20-005-3524
Mounting Bracket

200053524
87800087-107: RNCC: 3 | RNVC: 2

23 Feb 2010

5340-20-000-2482
Mounting Plate

200002482
9379029-1: RNCC: 3 | RNVC: 2

26 Jun 2002

5340-20-007-6792
Corner Brace

200076792
10706207-001PW: RNCC: 3 | RNVC: 2
10706207: RNCC: D | RNVC: 9

10 Jun 2013

5340-21-897-8286
Dust And Moisture Seal Protective Cap

218978286
183255105-0: RNCC: 3 | RNVC: 2
B183255105-0: RNCC: 5 | RNVC: 2

14 Dec 1984

5340-21-819-0699

5340-21-908-3863
Mounting Plate

219083863
10527948: RNCC: 3 | RNVC: 2

19 Feb 1992

5340-21-908-3387
Pawl Fastener

219083387
131 9110/1: RNCC: 3 | RNVC: 2
1319110/1: RNCC: 3 | RNVC: 2

16 Oct 1991

5340-21-908-0678
Double Angle Bracket

219080678
407010107221-2: RNCC: 3 | RNVC: 2

26 Mar 1991

5340-21-897-8436
Rod End Clevis

218978436
255-030: RNCC: 3 | RNVC: 2
AY-30: RNCC: 3 | RNVC: 2

14 Jan 1985

5340-21-921-3847
Mounting Bar Assemb

219213847
9379872-1: RNCC: 3 | RNVC: 2

25 Oct 2001

5340-21-905-6008
Section Block Clamp

219056008
CF 808 735 A: RNCC: 3 | RNVC: 2

5 May 1990

5340-20-008-1605
Access Cover

200081605
0777695-1: RNCC: 3 | RNVC: 2

5 Dec 2013

5340-20-007-1489
General Purpose Access Door

200071489
0577031-1: RNCC: 3 | RNVC: 2

18 Sep 2012

5340-21-911-8897
Access Door

219118897
9279577-1: RNCC: 3 | RNVC: 2

3 Jun 1994

5340-20-003-6020
Angle Bracket

200036020
0775859-2: RNCC: 3 | RNVC: 2

1 Oct 2007

5340-20-007-3860
Angle Bracket

200073860
10706697-001PG: RNCC: 3 | RNVC: 2
10706697: RNCC: D | RNVC: 9

11 Jan 2013

5340-20-004-6768
Loop Clamp

200046768
1921A-713A 1050/2050: RNCC: 3 | RNVC: 2
TR-1050: RNCC: 5 | RNVC: 2

12 Mar 2009

5340-20-003-2881
Upp Retaining Plate

200032881
379-730060-011: RNCC: 3 | RNVC: 2
379-730060-011: RNCC: 5 | RNVC: 2
379-730060-011: RNCC: 5 | RNVC: 2

2 Apr 2007

5340-20-003-1290
Access Cover

200031290
10665100-001PW: RNCC: 3 | RNVC: 2

5 Jan 2007

5340-21-874-3883
Retaining Strap

218743883
T1875: RNCC: 3 | RNVC: 2

13 Apr 1977

5340-21-845-2734
Loop Clamp

218452734
A2981A32-27: RNCC: 3 | RNVC: 2

17 Jan 1967

5340-21-900-1922
Loop Clamp

219001922
JM44RC2WH9-22HR: RNCC: 3 | RNVC: 2

17 Apr 1986

5340-20-006-0020
Multiple Angle Bracket

200060020
542400-1: RNCC: 3 | RNVC: 2

17 Dec 2010

5340-21-908-0582
Electrical-Mechanical Equipment Post

219080582
8863861-4: RNCC: 3 | RNVC: 2
8863861-4: RNCC: 5 | RNVC: 2

2 Feb 1991

5340-21-900-1664

5340-21-913-6491
Angle Bracket

219136491
9575839-1: RNCC: 3 | RNVC: 2

31 Jan 1997

5340-20-006-4185
Manual Control Handle

200064185
AC49033: RNCC: 3 | RNVC: 2

14 Jul 2011

5340-20-007-7116
Mounting Bracket

200077116
TE20013816-100: RNCC: 3 | RNVC: 2

14 Jun 2013

5340-20-003-5252
Mounting Plate

200035252
10661860-001PW: RNCC: 3 | RNVC: 2
10661860: RNCC: 5 | RNVC: 1

14 Aug 2007

5340-20-007-0660
General Purpose Access Door

200070660
1176882-2: RNCC: 1 | RNVC: 2
05379: RNCC: 3 | RNVC: 2

9 Aug 2012

5340-21-896-9610
Push Bar Plug

218969610
97-008: RNCC: 3 | RNVC: 2
97-008: RNCC: 3 | RNVC: 2

14 Oct 1984

5340-21-889-8414
Furniture Glide

218898414
UH-28: RNCC: 3 | RNVC: 2

16 Jun 1982

5340-21-900-1400
Angle Bracket

219001400
C6FF1959-29: RNCC: 3 | RNVC: 2

13 Jan 1986

5340-21-818-1389
Expansion Shield

218181389
251-07032: RNCC: 3 | RNVC: 2
251-2608: RNCC: 3 | RNVC: 2
2608: RNCC: 3 | RNVC: 2
RB311: RNCC: 5 | RNVC: 2

13 Jan 1972

5340-20-002-8232
Door Hinge

200028232
0476475-001: RNCC: 3 | RNVC: 2
0476475: RNCC: 5 | RNVC: 1
006971: RNCC: 5 | RNVC: 2

10 Jul 2006

5340-21-884-7820
Dust And Moisture Seal Boot

218847820
206-001-361-045: RNCC: 3 | RNVC: 2
206-001-361-45: RNCC: 5 | RNVC: 2

28 Apr 1981

5340-21-898-4786
Angle Bracket

218984786
253 6801-001: RNCC: 3 | RNVC: 2

6 Sep 1985

5340-20-008-2159
Dust And Moisture Seal Protective Cap

200082159
NCLB 740-003.021: RNCC: 3 | RNVC: 2

8 Jan 2014

5340-20-007-7585
Mounting Bracket

200077585
10683430-011PG: RNCC: 3 | RNVC: 2
10683430: RNCC: D | RNVC: 9

8 Jul 2013

5340-21-660-1815
Retaining Strap

216601815
212: RNCC: 3 | RNVC: 1
701EAYFU: RNCC: 3 | RNVC: 2
305-9082: RNCC: 6 | RNVC: 9
460-1767: RNCC: 6 | RNVC: 9

25 May 1968

5340-21-915-0126
Multiple Angle Bracket

219150126
10616881: RNCC: 3 | RNVC: 2

11 Mar 1999

5340-21-908-3437
Angle Bracket

219083437
130 2073: RNCC: 3 | RNVC: 2

25 Oct 1991

5340-21-864-1838
Electrical-Mechanical Equipment Post

218641838
7-116-2: RNCC: 3 | RNVC: 2

13 Jan 1972

5340-21-908-4098
Mounting Bracket

219084098
B183801592: RNCC: 3 | RNVC: 2

3 Jun 1992

5340-20-006-5544
Angle Bracket

200065544
AC40368-07: RNCC: 3 | RNVC: 2

21 Oct 2011

5340-21-882-8941
Sliding Glass Lock

218828941
BC218: RNCC: 3 | RNVC: 2
4710370-002: RNCC: 5 | RNVC: 2

15 Oct 1980

5340-21-897-8438
Rim Clenching Clamp

218978438
CKB-719: RNCC: 3 | RNVC: 2

14 Jan 1985

5340-20-007-6677
Mounting Bracket

200076677
10680121-011PW: RNCC: 3 | RNVC: 2
10680121: RNCC: D | RNVC: 9

27 May 2013

5340-20-002-9675
Back Plate Assembly

200029675
04-M113-2-2100: RNCC: 3 | RNVC: 2

3 Oct 2006

5340-20-000-0160
Mounting Bracket

200000160
10656366-011: RNCC: 3 | RNVC: 2
10656366-011PW: RNCC: 5 | RNVC: 9

11 Apr 2002

5340-21-875-1399
Clamping Catch

218751399
1650839: RNCC: 3 | RNVC: 2
2540-0055: RNCC: 6 | RNVC: 9

10 Nov 1976

5340-21-913-2977
Handwheel

219132977
9578150-1: RNCC: 3 | RNVC: 2

3 Oct 1996

5340-21-877-3166
Chain Link

218773166
303767: RNCC: 3 | RNVC: 2

11 Oct 1977

5340-21-879-5257
Door Closer

218795257
20-330NH: RNCC: 3 | RNVC: 1

4 Jul 1978

5340-21-848-1908
Plug Button

218481908
B1273: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-006-0023
Mounting Bracket

200060023
542766-1: RNCC: 3 | RNVC: 2

17 Dec 2010

5340-21-908-0988
Multiple Angle Bracket

219080988
9117016-1: RNCC: 3 | RNVC: 2

29 Aug 1991

5340-20-003-9171
Shield

200039171
3019329: RNCC: 3 | RNVC: 2

26 Feb 2008

5340-20-006-3419
Bumper

200063419
85420046-101: RNCC: 3 | RNVC: 2

13 Jun 2011

5340-21-862-6198
Expansion Shield

218626198
PSA 5/16X1 3/8: RNCC: 3 | RNVC: 1
0616-13000: RNCC: 3 | RNVC: 2
616-13: RNCC: 3 | RNVC: 2
660340: RNCC: 3 | RNVC: 2
0616-13000: RNCC: 3 | RNVC: 2

16 Sep 1971

5340-21-908-3952
Flush Catch

219083952
CPF-000-500: RNCC: 3 | RNVC: 2

7 Mar 1992

5340-20-006-3865
Mounting Plate

200063865
85420026-104: RNCC: 3 | RNVC: 2

27 Jun 2011

5340-21-897-8664
Master Pin

218978664
34-202: RNCC: 3 | RNVC: 2

14 Feb 1985

5340-21-103-6523
Mounting Bracket

211036523
F148-0300050: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-906-3602
Dust And Moisture Seal Boot

219063602
69D-1103: RNCC: 3 | RNVC: 2

3 Feb 1990

5340-21-912-5790
Retaining Strap

219125790
9277596-1: RNCC: 3 | RNVC: 2

4 May 1995

5340-21-876-2127
Loop Clamp

218762127
09136169: RNCC: 3 | RNVC: 2

13 Sep 1977

5340-21-868-8159
Mortise Lo Cylinder

218688159
50: RNCC: 3 | RNVC: 1

15 Dec 1972

5340-21-868-9661
Turnbuckle

218689661
G225: RNCC: 3 | RNVC: 1

22 Oct 1974

5340-20-004-8465
Mounting Plate

200048465
B30601-315-1: RNCC: 3 | RNVC: 2

29 May 2009

5340-21-893-7809
Butt Hinge

218937809
BB1168 4-1/2X4IN: RNCC: 3 | RNVC: 2

16 Jul 1983

5340-21-660-0183
Butt Hinge

216600183
814: RNCC: 3 | RNVC: 1
814 1/2-1 1/2 X 3 7/16: RNCC: 3 | RNVC: 2
131-7814: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-001-8057
Mounting Plate

200018057
C50703-048-1: RNCC: 3 | RNVC: 2
C50703-048: RNCC: D | RNVC: 9

5 Jan 2005

5340-20-002-3579
Mounting Plate

200023579
10658483-001PW: RNCC: 3 | RNVC: 2
10658483: RNCC: D | RNVC: 9

15 Nov 2005

5340-20-007-5883
Mounting Bracket

200075883
10705229-001PEW: RNCC: 3 | RNVC: 2
10705229: RNCC: D | RNVC: 9

18 Apr 2013

5340-21-911-1248
Mounting Plate

219111248
391-04137-00: RNCC: 3 | RNVC: 2

20 Nov 1993

5340-21-852-9940
Electrical-Mechanical Equipment Post

218529940
113067-1: RNCC: 3 | RNVC: 2

24 Feb 1969

5340-21-920-1917
Mounting Bracket

219201917
10617697-1: RNCC: 3 | RNVC: 2

11 Jun 1999

5340-20-005-8946
Access Cover

200058946
0677861-1: RNCC: 3 | RNVC: 2

1 Nov 2010

5340-21-848-4800
Doorstop

218484800
6277: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-848-3608
Screw Retainer

218483608
660068: RNCC: 3 | RNVC: 2

18 Oct 1973

5340-20-002-0556
Angle Bracket

200020556
10624755-PW: RNCC: 3 | RNVC: 2

19 May 2005

5340-21-866-9687
Lockshield Key

218669687
196: RNCC: 3 | RNVC: 2

18 Aug 1972

5340-20-005-6959
Mounting Bracket

200056959
0678127-1: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-21-911-1435
Access Cover

219111435
11491-3: RNCC: 3 | RNVC: 2

28 Jan 1994

5340-20-000-5896
Expansion Shield

200005896
226-026: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-20-000-4498
Angle Bracket

200004498
10655302-001PEW: RNCC: 3 | RNVC: 2
10655302: RNCC: D | RNVC: 9

9 Oct 2002

5340-21-860-5126
Hinged Hasp

218605126
915: RNCC: 3 | RNVC: 1
915-6: RNCC: 3 | RNVC: 2

15 Oct 1970

5340-20-004-5521
Mounting Bracket

200045521
604-75100-1: RNCC: 3 | RNVC: 2
604-75100: RNCC: 5 | RNVC: 1
PL-604-75100: RNCC: 5 | RNVC: 1

9 Feb 2009

5340-21-870-9892
Bracket

218709892
127471-1: RNCC: 3 | RNVC: 2
0035-7686: RNCC: 6 | RNVC: 9

20 Oct 1976

5340-21-116-6863

5340-21-797-0026

5340-21-116-7260

5340-20-000-1246
Mounting Plate

200001246
9379076-1: RNCC: 3 | RNVC: 2

9 May 2002

5340-20-007-9306
Mounting Bracket

200079306
5800-6349-1: RNCC: 3 | RNVC: 2

19 Sep 2013

5340-21-876-2226
Resilient Mount

218762226
03262998: RNCC: 3 | RNVC: 2

27 Sep 1977

5340-21-908-0637
Detent Plunger

219080637
06290174: RNCC: 3 | RNVC: 2

2 Mar 1991

5340-20-006-2208
Mounting Bracket

200062208
83220046-101: RNCC: 3 | RNVC: 2

5 Apr 2011

5340-20-003-0230
Base Retainer Cap

200030230
B61000-274-1: RNCC: 3 | RNVC: 2

15 Nov 2006

5340-21-891-5900
Faceplate

218915900
K510-G917: RNCC: 3 | RNVC: 2
K510-G917: RNCC: 5 | RNVC: 2

20 Feb 1983

5340-21-901-9000
Lock-Release Lever

219019000
BS2552-13-00-000: RNCC: 3 | RNVC: 2

3 May 1988

5340-20-008-1333
Mounting Plate

200081333
10709213-001PEW: RNCC: 3 | RNVC: 2
10709213: RNCC: D | RNVC: 9

25 Nov 2013

5340-21-868-9061
Door Closer Arm

218689061
5340-5160: RNCC: 3 | RNVC: 2

31 Dec 1973

5340-20-005-6785
Butt Hinge

200056785
9480778-1: RNCC: 3 | RNVC: 2
9480778-1: RNCC: 3 | RNVC: 2

11 Jun 2010

5340-20-005-4214
Angle Bracket

200054214
543930-1: RNCC: 3 | RNVC: 2

1 Apr 2010

5340-21-914-4868
Cushioning Pad

219144868
1029746-1: RNCC: 3 | RNVC: 2

27 Jan 1998

5340-21-847-5892
Butt Hinge

218475892
179N5: RNCC: 3 | RNVC: 1
F179C15-3 1/2 X 3 1/2: RNCC: 3 | RNVC: 2
F179C15-3 1/2 X 3 1/2: RNCC: 3 | RNVC: 2

14 Oct 1971

5340-21-893-8880
Rim Latch Set

218938880
1494F-L1: RNCC: 3 | RNVC: 2
WM-ES15: RNCC: 5 | RNVC: 2

3 Dec 1983

5340-20-001-6324
Mounting Bracket

200016324
10655902-011: RNCC: 3 | RNVC: 2
10655902: RNCC: D | RNVC: 9

22 Sep 2004

5340-21-843-4568

5340-21-846-8459
Antipilferage Seal

218468459
62: RNCC: 3 | RNVC: 1
0-0: RNCC: 3 | RNVC: 1

6 Jun 1968

5340-20-007-0270
Dust And Moisture Seal Protective Cap-Plug

200070270
RT-2006-1C: RNCC: 3 | RNVC: 2
SML000360: RNCC: 5 | RNVC: 2
RT-2000-6A ITEM6: RNCC: 5 | RNVC: 2

17 Jul 2012

5340-20-005-7492
Multiple Angle Bracket

200057492
B30400-119-1: RNCC: 3 | RNVC: 2

27 Jul 2010

5340-21-863-7428
Clamping Catch

218637428
SE21-264: RNCC: 3 | RNVC: 2

19 May 1972

5340-21-921-0349
Angle Bracket

219210349
9958549-1: RNCC: 3 | RNVC: 2
357-601A: RNCC: 5 | RNVC: 2

13 Feb 2001

5340-21-660-0242
Butt Hinge

216600242
1334: RNCC: 3 | RNVC: 1
1334C2H 4 X 4: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-878-0032
Catch Latch

218780032
T957-4: RNCC: 3 | RNVC: 2

6 Dec 1977

5340-21-908-0619
Blank Panel

219080619
214917-1: RNCC: 3 | RNVC: 2

20 Mar 1991

5340-20-000-2470
Mounting Plate

200002470
9378937-1: RNCC: 3 | RNVC: 2

25 Jun 2002

5340-21-908-0808
Seal Retaining Plate

219080808
8663757-2: RNCC: 3 | RNVC: 2

28 May 1991

5340-20-005-7982
Inner Lanyard Cover

200057982
10676500-001PG: RNCC: 3 | RNVC: 2

16 Aug 2010

5340-21-882-8051
Dust And Moisture Seal Protective Cap

218828051
320-380-533: RNCC: 3 | RNVC: 2

30 Apr 1980

5340-21-866-9226

5340-20-001-0549
Angle Bracket

200010549
10655918-011: RNCC: 3 | RNVC: 2

24 Sep 2003

5340-20-006-0043
Skirt Cont Frame

200060043
100030-D-4021: RNCC: 3 | RNVC: 2

17 Dec 2010

5340-20-003-4089
Retainer

200034089
A6196163-1: RNCC: 3 | RNVC: 2

18 Jun 2007

5340-21-908-0614
Electronic Equipment Hardware Kit

219080614
552768-2: RNCC: 3 | RNVC: 2
552768-2: RNCC: 3 | RNVC: 2

27 Feb 1991

5340-21-878-0228
Plug Button

218780228
KP125: RNCC: 3 | RNVC: 2

12 Jan 1978

5340-21-877-3451
Flush Lock

218773451
M1108ARH: RNCC: 3 | RNVC: 2
5340-5795: RNCC: 6 | RNVC: 9

18 Oct 1977

5340-20-003-8218
Handle Upper Left

200038218
6430-1320-00: RNCC: 3 | RNVC: 2

7 Jan 2008

5340-20-006-5159
Mounting Plate

200065159
360410-001: RNCC: 3 | RNVC: 2

28 Sep 2011

5340-20-005-6029
Mounting Bracket

200056029
AC40368-08: RNCC: 3 | RNVC: 2

19 May 2010

5340-21-911-1239
Headless Straight Rod

219111239
ALT-05195-07: RNCC: 3 | RNVC: 2

6 Nov 1993

5340-21-914-1914
Detent Plunger

219141914
1237-224-1: RNCC: 3 | RNVC: 2

30 Jul 1998

5340-21-913-2986
Locking Stay

219132986
9575856-1: RNCC: 3 | RNVC: 2

8 Nov 1996

5340-20-001-5269
Strap Hinge

200015269
DE-4453: RNCC: 3 | RNVC: 2

10 Jul 2004

5340-20-006-3607
Mounting Bracket

200063607
83210376-101: RNCC: 3 | RNVC: 2

20 Jun 2011

5340-20-006-3088
Mounting Plate

200063088
01-10-0001: RNCC: 3 | RNVC: 2

24 May 2011

5340-21-868-9095
Butt Hinge

218689095
E1242-26: RNCC: 3 | RNVC: 2
5340-5184: RNCC: 6 | RNVC: 9

31 Dec 1973

5340-20-000-3327
Bar Reinforcing

200003327
9380494-1: RNCC: 3 | RNVC: 2

8 Aug 2002

5340-20-000-1881
Mounting Bracket

200001881
9380361-7: RNCC: 3 | RNVC: 2

4 Jun 2002

5340-21-877-3785
Spring Tension Clip

218773785
4T1-2-4: RNCC: 3 | RNVC: 2
4T1-2-4: RNCC: 3 | RNVC: 2

22 Nov 1977

5340-21-921-3948
Mounting Plate

219213948
95260: RNCC: 3 | RNVC: 2

29 Oct 2001

5340-21-897-8191
Electrical-Mechanical Equipment Post

218978191
123-001474: RNCC: 3 | RNVC: 2

12 Dec 1984

5340-20-008-1601
Mounting Plate

200081601
4123434: RNCC: 3 | RNVC: 2

5 Dec 2013

5340-20-002-5699
Female Clevis

200025699
7403-213-1: RNCC: 3 | RNVC: 2

16 Mar 2006

5340-21-660-1530
Pipe Bracket

216601530
GF9X02-0020002-01: RNCC: 3 | RNVC: 1
9900SK369: RNCC: 3 | RNVC: 2
6191-885-13: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-868-9090
Door Closer

218689090
DCR400M4: RNCC: 3 | RNVC: 1
5340-5149: RNCC: 6 | RNVC: 9

31 Dec 1973

5340-21-108-3835

5340-21-108-5753

5340-20-001-8151
Mounting Bracket

200018151
B40603-018-1: RNCC: 3 | RNVC: 2
B40603-018: RNCC: D | RNVC: 9

7 Jan 2005

5340-21-901-8730
Nonmetallic Bumper

219018730
315-004: RNCC: 3 | RNVC: 2
8710778-1B: RNCC: 5 | RNVC: 2
RG07171: RNCC: 5 | RNVC: 2

17 Sep 1987

5340-20-003-8652
Mounting Bracket

200038652
10671635-011PG: RNCC: 3 | RNVC: 2

24 Jan 2008

5340-20-005-3174
Mounting Plate

200053174
85330365-107: RNCC: 3 | RNVC: 2

17 Feb 2010

5340-21-908-3658
Door Holder

219083658
8877757-1: RNCC: 3 | RNVC: 2

9 Jan 1992

5340-21-901-8328
Cylinder Plug

219018328
33-406CX626: RNCC: 3 | RNVC: 2

1 Nov 1986

5340-20-000-3812
Webbing Strap

200003812
9379422-1: RNCC: 3 | RNVC: 2

5 Sep 2002

5340-21-914-6038
Mounting Bracket

219146038
8961152-2: RNCC: 3 | RNVC: 2

20 Mar 1998

5340-21-920-0463
Butt Hinge

219200463
10616828: RNCC: 3 | RNVC: 2

24 Mar 1999

5340-20-000-0393
Mounting Bracket

200000393
10652426-011PEW: RNCC: 3 | RNVC: 2

16 Apr 2002

5340-20-000-4603
Mounting Bracket

200004603
10656119-001: RNCC: 3 | RNVC: 2
10656119: RNCC: D | RNVC: 9

15 Oct 2002

5340-21-818-7855

5340-21-840-9271

5340-21-840-9304

5340-20-002-3962
Mounting Bracket

200023962
10652149: RNCC: 3 | RNVC: 2

13 Dec 2005

5340-21-660-0216
Butt Hinge

216600216
823: RNCC: 3 | RNVC: 1
823 4 X 4: RNCC: 3 | RNVC: 2
69GP1: RNCC: 4 | RNVC: 1

6 Jun 1968

5340-21-899-5874
Webbing Strap

218995874
B183860863D: RNCC: 3 | RNVC: 2
8481992-1: RNCC: 5 | RNVC: 2

17 Jun 1985

5340-20-004-2860
Magnetic Base

200042860
49001: RNCC: 3 | RNVC: 2

16 Sep 2008

5340-21-921-0371
Expansion Shield

219210371
N-96: RNCC: 3 | RNVC: 2

16 Feb 2001

5340-21-914-8587
Mounting Plate

219148587
259262-001: RNCC: 3 | RNVC: 2

24 Jul 1998

5340-20-000-2684
Mounting Plate

200002684
10651955-001: RNCC: 3 | RNVC: 2

8 Jul 2002

5340-21-868-8932
Butt Hinge

218688932
F241: RNCC: 3 | RNVC: 1
69GP1TS311: RNCC: 4 | RNVC: 1
5340-5103: RNCC: 6 | RNVC: 9

28 Nov 1973

5340-21-913-0835
Low Pivot Elevation

219130835
9282065-1: RNCC: 3 | RNVC: 2

28 Apr 1996

5340-21-908-9866
Angle Bracket

219089866
8762389-1: RNCC: 3 | RNVC: 2

3 Dec 1991

5340-21-862-6116
Expansion Shield

218626116
3425-1: RNCC: 3 | RNVC: 2
B206: RNCC: 3 | RNVC: 2

15 Jul 1971

5340-21-920-7837
Webbing Strap

219207837
9383515-3: RNCC: 3 | RNVC: 2

5 Sep 2000

5340-21-040-2205

5340-20-000-5341
Spoke Tube

200005341
BB-414: RNCC: 3 | RNVC: 2

9 Jan 2003

5340-21-911-8870
Access Cover

219118870
9279012-1: RNCC: 3 | RNVC: 2

25 May 1994

5340-21-897-8305
Retaining Strap

218978305
626-0133-00: RNCC: 3 | RNVC: 2

15 Dec 1984

5340-21-660-1187
Screw Hook

216601187
5737: RNCC: 3 | RNVC: 2
131-8905: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-007-6722
Mounting Bracket

200076722
10703744-011PW: RNCC: 3 | RNVC: 2
10703744: RNCC: D | RNVC: 9

27 May 2013

5340-21-846-8431
Padlock

218468431
22011-41: RNCC: 3 | RNVC: 2
16140: RNCC: 5 | RNVC: 9

23 Aug 1967

5340-20-006-4249
Mounting Bracket

200064249
091895-M044: RNCC: 3 | RNVC: 2

21 Jul 2011

5340-20-003-5217
Bar

200035217
10661487-001: RNCC: 3 | RNVC: 2
10661487: RNCC: 5 | RNVC: 1

10 Aug 2007

5340-20-005-7278
Access Cover

200057278
10676478-011: RNCC: 3 | RNVC: 2

15 Jul 2010

5340-21-888-1580
Expansion Shield

218881580
31972: RNCC: 3 | RNVC: 2
2415-485: RNCC: 3 | RNVC: 2
2415-485: RNCC: 3 | RNVC: 2

12 Feb 1982

5340-20-007-9002
Dust And Moisture Seal Protective Cover

200079002
0669-785672-03: RNCC: 3 | RNVC: 2

11 Sep 2013

5340-21-901-8973
Furniture Glide

219018973
493-7/8: RNCC: 3 | RNVC: 2

1 Apr 1988

5340-21-660-0923
Foot Bolt

216600923
1057: RNCC: 3 | RNVC: 1
1057C1B-6: RNCC: 3 | RNVC: 2
1057J-6: RNCC: 3 | RNVC: 2
130-2926: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-004-0354
Mounting Plate

200040354
9877898-1: RNCC: 3 | RNVC: 2

14 Apr 2008

5340-20-005-1234
Mounting Bracket

200051234
0778055-2: RNCC: 3 | RNVC: 2

22 Oct 2009

5340-21-912-5910
Retaining Clip

219125910
04075-4: RNCC: 3 | RNVC: 2
DC89939-1: RNCC: 5 | RNVC: 2

27 Jul 1995

5340-21-868-9068
Loop Clamp

218689068
CLE1 1-2: RNCC: 3 | RNVC: 2

31 Dec 1973

5340-20-005-3016
Double Angle Bracket

200053016
0778042-1: RNCC: 3 | RNVC: 2

11 Feb 2010

5340-21-901-8508
Padlock Set

219018508
SYSTEM C: RNCC: 3 | RNVC: 2

4 Feb 1987

5340-20-008-1304
Mounting Bracket

200081304
10711461-011PEG: RNCC: 3 | RNVC: 2
10711461: RNCC: D | RNVC: 9

25 Nov 2013

5340-20-001-2121
Clamp

200012121
85100002870: RNCC: 3 | RNVC: 2

19 Jan 2004

5340-21-813-4913
Nut And Bolt Locking Plate

218134913
30-60010: RNCC: 3 | RNVC: 2

26 Jun 1964

5340-21-908-4600
Clamp

219084600
86056: RNCC: 3 | RNVC: 2

22 Aug 1992

5340-21-890-4948
Loop Clamp

218904948
T1500: RNCC: 3 | RNVC: 2

14 Nov 1982

5340-21-920-6785
Dust And Moisture Seal Protective Cap

219206785
G299352: RNCC: 3 | RNVC: 2

2 Jun 2000

5340-21-908-4678
Access Cover

219084678
CF 807 524 AE: RNCC: 3 | RNVC: 2

3 Sep 1992

5340-20-000-1469
Mounting Bracket

200001469
10655597-011PW: RNCC: 3 | RNVC: 2

14 May 2002

5340-20-001-2247
Access Cover

200012247
GD421-7920-3: RNCC: 3 | RNVC: 2

21 Jan 2004

5340-21-913-8902
Mounting Bracket

219138902
VD-96-00073-1: RNCC: 3 | RNVC: 2

17 Apr 1997

5340-20-007-7265
Mounting Bracket

200077265
10658811-001PEW: RNCC: 3 | RNVC: 2
10658811: RNCC: D | RNVC: 9

25 Jun 2013

5340-20-001-0219
Access Cover

200010219
10657303-011: RNCC: 3 | RNVC: 2

10 Sep 2003

5340-20-003-8157
Guard

200038157
0081579-1: RNCC: 3 | RNVC: 2

3 Jan 2008

5340-20-005-3019
Mounting Plate

200053019
0778065-2: RNCC: 3 | RNVC: 2

12 Feb 2010

5340-21-908-0867
Nonmetallic Bumper

219080867
4-6207: RNCC: 3 | RNVC: 2

27 Jun 1991

5340-21-905-5531
Retaining Strap

219055531
CF 431 544-X: RNCC: 3 | RNVC: 2

10 May 1989

5340-20-002-2256
Wire Disrupter

200022256
VWD-40: RNCC: 3 | RNVC: 2

25 Aug 2005

5340-20-003-1832
Mounting Bracket

200031832
3052880-01: RNCC: 3 | RNVC: 2

31 Jan 2007

5340-20-003-3051
Spring Retainer

200033051
A20618-078-1: RNCC: 3 | RNVC: 2
A20618-078-1: RNCC: 5 | RNVC: 2

17 Apr 2007

5340-20-003-1361
Bow Handle

200031361
10668140-001PW: RNCC: 3 | RNVC: 2

8 Jan 2007

5340-21-901-8354
Webbing Strap

219018354
8529: RNCC: 3 | RNVC: 2
10505129: RNCC: 5 | RNVC: 2

24 Nov 1986

5340-20-005-8707
Mounting Plate

200058707
4100856: RNCC: 3 | RNVC: 2

14 Oct 2010

5340-21-908-0798
Cap

219080798
206-076-065-001: RNCC: 3 | RNVC: 2

11 Jul 1991

5340-21-910-8748
Mounting Plate

219108748
TE10003947-001: RNCC: 3 | RNVC: 2

25 Jun 1993

5340-20-000-9461
Mounting Plate

200009461
10655175-001PEG: RNCC: 3 | RNVC: 2

12 Aug 2003

5340-21-859-0277
Butt Hinge

218590277
69GP1TYPETS112: RNCC: 2 | RNVC: 2
821: RNCC: 3 | RNVC: 1
821C10: RNCC: 3 | RNVC: 1
821C10-4 BY 4: RNCC: 3 | RNVC: 2
69GP2: RNCC: 4 | RNVC: 1
821C10-4X4: RNCC: 5 | RNVC: 2

16 Apr 1970

5340-21-876-7860
Dust And Moisture Seal Boot

218767860
11M034: RNCC: 3 | RNVC: 2
2530-0316: RNCC: 6 | RNVC: 9

30 Aug 1977

5340-20-002-8334
Bracket (Nvis)

200028334
318-800087-13: RNCC: 3 | RNVC: 2

14 Jul 2006

5340-21-913-8945
Plug Button

219138945
245-109: RNCC: 3 | RNVC: 2

19 Apr 1997

5340-20-000-5660
Access Cover

200005660
10628244-PG: RNCC: 3 | RNVC: 2
10628244: RNCC: D | RNVC: 9

6 Feb 2003

5340-20-007-2995
Installations Guard

200072995
TE10021115-001: RNCC: 3 | RNVC: 2

3 Dec 2012

5340-20-006-4426
Mounting Bracket

200064426
82520344-003: RNCC: 3 | RNVC: 2

3 Aug 2011

5340-20-007-6316
Mounting Bracket

200076316
87610273-101: RNCC: 3 | RNVC: 2
87610273: RNCC: D | RNVC: 9

6 May 2013

5340-20-005-8403
Mounting Bracket

200058403
AC40341-02: RNCC: 3 | RNVC: 2

23 Sep 2010

5340-21-905-5648
Bridge Clamp

219055648
27-0078: RNCC: 3 | RNVC: 2
P4-0659: RNCC: 3 | RNVC: 2

3 Aug 1989

5340-20-002-2190
Webbing Strap

200022190
0075773-1: RNCC: 3 | RNVC: 2

23 Aug 2005

5340-20-007-9532
Mounting Bracket

200079532
10696372-011PEG: RNCC: 3 | RNVC: 2
10696372: RNCC: D | RNVC: 9

26 Sep 2013

5340-21-913-0001
Plug

219130001
11-P436005/23: RNCC: 3 | RNVC: 2

7 Feb 1996

5340-20-006-0992
Multiple Angle Bracket

200060992
82510096-103: RNCC: 3 | RNVC: 2

8 Feb 2011

5340-21-844-5559
Angle Bracket

218445559
S6122-82413-12: RNCC: 3 | RNVC: 2

27 Sep 1966

5340-21-859-2940
Mortise Lock Set

218592940
CE8656C10: RNCC: 3 | RNVC: 2
ML8656: RNCC: 3 | RNVC: 2

16 Jul 1970

5340-21-874-8464
Webbing Strap

218748464
8417: RNCC: 3 | RNVC: 2

25 Aug 1976

5340-21-921-6168
Clip Retainer Plate

219216168
3043535-02: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-21-913-4868
Mounting Bracket

219134868
VC-96-00133: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-20-001-2126
Mounting Bracket

200012126
85.10000.2869: RNCC: 3 | RNVC: 2
61560080172: RNCC: 5 | RNVC: 2

19 Jan 2004

5340-20-001-0834
Webbing Strap

200010834
9278808-4: RNCC: 3 | RNVC: 2

23 Oct 2003

5340-20-006-5620
Double Angle Bracket

200065620
0875261-1: RNCC: 3 | RNVC: 2
0875261-1: RNCC: 3 | RNVC: 2

28 Oct 2011

5340-21-841-0115
Shelf Bracket

218410115
796: RNCC: 3 | RNVC: 1
796Z: RNCC: 3 | RNVC: 1
796Z-5 X 7: RNCC: 3 | RNVC: 2
69GP8: RNCC: 5 | RNVC: 1
B57: RNCC: 5 | RNVC: 2
130-3775: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-908-3597
Mounting Plate

219083597
CF814442A: RNCC: 3 | RNVC: 2
59.61.061.A: RNCC: 5 | RNVC: 2

18 Dec 1991

5340-21-921-4741
Mounting Bracket

219214741
8676476-1: RNCC: 3 | RNVC: 2

28 Nov 2001

5340-21-895-0433
Electrical-Mechanical Equipment Post

218950433
8066-59: RNCC: 3 | RNVC: 2

4 Feb 1984

5340-21-896-9782
Bracket Latch

218969782
74-16865-00: RNCC: 3 | RNVC: 2

22 Oct 1984

5340-21-908-3755
Electrical-Mechanical Equipment Post

219083755
9507C-B-0256-14: RNCC: 3 | RNVC: 1
3017-C-256-B-16: RNCC: 3 | RNVC: 1
RB46-256-135G14-21: RNCC: 3 | RNVC: 1
PS130591-02: RNCC: 3 | RNVC: 2

23 Jan 1992

5340-21-007-3350
Catch Strike

210073350
GF9H26-0020082ITEM69: RNCC: 3 | RNVC: 2
9265214: RNCC: 3 | RNVC: 2
98567: RNCC: 5 | RNVC: 2
51094: RNCC: 5 | RNVC: 9
8610780-73: RNCC: 5 | RNVC: 9

6 Jun 1968

5340-21-810-4576
Latch

218104576
S1188-1: RNCC: 3 | RNVC: 2

26 Sep 1963

5340-20-004-9580
Loop Clamp

200049580
0656-035048-03: RNCC: 3 | RNVC: 2

16 Jul 2009

5340-21-908-5469
Support Assembly

219085469
704-132671-002-0: RNCC: 3 | RNVC: 2

24 Apr 1993

5340-20-004-6122
Cushioning Pad

200046122
305615-001: RNCC: 3 | RNVC: 2
305615: RNCC: 5 | RNVC: 1

25 Feb 2009

5340-21-629-2121
Resilient Mount

216292121
CA148-40: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-908-0593
Webbing Strap

219080593
8604/4: RNCC: 3 | RNVC: 2
10552743-4: RNCC: 5 | RNVC: 2

8 Feb 1991

5340-21-862-6347
Key Blank

218626347
S54F: RNCC: 3 | RNVC: 2

16 Sep 1971

5340-21-893-6135
Kick Door Plate

218936135
KPSS: RNCC: 3 | RNVC: 2

21 May 1983

5340-20-007-7558
Mounting Plate

200077558
10688262-001PW: RNCC: 3 | RNVC: 2
10688262: RNCC: D | RNVC: 9

8 Jul 2013

5340-20-005-1264
Cover Strip

200051264
B30603-214-1: RNCC: 3 | RNVC: 2

26 Oct 2009

5340-21-914-1908
Kickplate Weld Seal

219141908
1237-292-13: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-20-003-5289
Mounting Bracket

200035289
10661508-011PW: RNCC: 3 | RNVC: 2
10661508: RNCC: 5 | RNVC: 1

16 Aug 2007

5340-20-007-0451
Nut And Bolt Head Protective Cap

200070451
315-827: RNCC: 3 | RNVC: 2
10686404-001: RNCC: 7 | RNVC: 2
10686404: RNCC: D | RNVC: 9

26 Jul 2012

5340-20-002-2292
Access Co Stiffener

200022292
3903-065: RNCC: 3 | RNVC: 2

26 Aug 2005

5340-20-001-8147
Double Angle Bracket

200018147
B40603-015-1: RNCC: 3 | RNVC: 2
B40603-015: RNCC: D | RNVC: 9

7 Jan 2005

5340-21-660-1895
Turnbuckle

216601895
305: RNCC: 3 | RNVC: 1
346B: RNCC: 3 | RNVC: 1
305: RNCC: 3 | RNVC: 1
HG228 1-2X6JJ: RNCC: 3 | RNVC: 2
11116: RNCC: 3 | RNVC: 2
305X1/2-6: RNCC: 3 | RNVC: 2
60: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-905-5472
Loop Clamp

219055472
5035778-00: RNCC: 3 | RNVC: 2

15 Apr 1989

5340-21-866-9180
Padlock

218669180
295G: RNCC: 3 | RNVC: 2

16 Jun 1972

5340-20-007-6394
Mounting Plate

200076394
10691361-011PEW: RNCC: 3 | RNVC: 2
10691361: RNCC: D | RNVC: 9

9 May 2013

5340-20-006-7880
Mechanic Equipment Hardware Kit

200067880
10687742-011: RNCC: 3 | RNVC: 2
10687742: RNCC: D | RNVC: 9

14 Mar 2012

5340-21-882-8553
Latch Assembly Kit

218828553
E1-AL47-5624: RNCC: 3 | RNVC: 2

23 Jul 1980

5340-21-908-4748
Pad Eye

219084748
TE20002682-100: RNCC: 3 | RNVC: 2

24 Sep 1992

5340-20-008-2135
Mounting Bracket

200082135
0777687-1: RNCC: 3 | RNVC: 2
0777687: RNCC: D | RNVC: 9

7 Jan 2014

5340-20-005-3447
Lever Bracket

200053447
82740149-001: RNCC: 3 | RNVC: 2

22 Feb 2010

5340-21-914-4353
Blank Panel

219144353
9427412-1: RNCC: 3 | RNVC: 2

5 Sep 1997

5340-21-912-5928
Butt Hinge

219125928
9277092-2: RNCC: 3 | RNVC: 2

26 Jul 1995

5340-21-920-9638
Mounting Bracket

219209638
9878231-1: RNCC: 3 | RNVC: 2

20 Dec 2000

5340-21-913-6498
Corrosion Preventive Anode

219136498
B-2328: RNCC: 3 | RNVC: 2

1 Feb 1997

5340-21-866-9189
Elbow Catch

218669189
3675: RNCC: 3 | RNVC: 2

16 Jun 1972

5340-21-880-7660
Thread Blind Insert

218807660
SL602-3-700C: RNCC: 3 | RNVC: 2

29 Jan 1980

5340-21-908-4675
Spool Towing

219084675
71-139-3: RNCC: 3 | RNVC: 2

3 Sep 1992

5340-20-002-4298
Double Angle Bracket

200024298
130014DE411-1: RNCC: 3 | RNVC: 2
130014DE411: RNCC: D | RNVC: 9

22 Dec 2005

5340-21-905-5101
Latch Plunger

219055101
2-100809: RNCC: 3 | RNVC: 2
B4867-001: RNCC: 5 | RNVC: 2

23 Jul 1988

5340-21-908-0102
Mounting Bracket

219080102
CF 346 527 A: RNCC: 3 | RNVC: 2

2 Aug 1990

5340-21-803-0050

5340-21-912-3215
Access Hole Frame

219123215
01177879: RNCC: 3 | RNVC: 2

15 Feb 1995

5340-21-896-2761
Expansion Shield

218962761
5852: RNCC: 3 | RNVC: 2
38521: RNCC: 5 | RNVC: 2

26 Aug 1984

5340-20-004-0551
Turnbuckle

200040551
800-0009-01: RNCC: 3 | RNVC: 2

25 Apr 2008

5340-20-004-5908
Mounting Bracket

200045908
300230-001: RNCC: 3 | RNVC: 2
300230: RNCC: 5 | RNVC: 1

19 Feb 2009

5340-21-912-9996
Plug

219129996
80-280-01823-102: RNCC: 3 | RNVC: 2

7 Feb 1996

5340-21-874-2771
Loop Clamp

218742771
2990-0009: RNCC: 3 | RNVC: 2

1 Dec 1976

5340-20-006-9036
Mounting Bracket

200069036
1175048-1: RNCC: 3 | RNVC: 2

17 May 2012

5340-21-908-3592
Access Cover

219083592
9117056-1: RNCC: 3 | RNVC: 2

14 Dec 1991

5340-20-000-2353
Mounting Bracket

200002353
9376810-1: RNCC: 3 | RNVC: 2

20 Jun 2002

5340-21-905-5336
Mounting Bracket

219055336
8281875-1: RNCC: 3 | RNVC: 2
1507539669: RNCC: 5 | RNVC: 2

17 Dec 1988

5340-21-912-1012
Handle Grip

219121012
9279668-1: RNCC: 3 | RNVC: 2

17 Aug 1994

5340-21-660-1917
Turnbuckle

216601917
0-0: RNCC: 3 | RNVC: 1

6 Jun 1968

5340-20-006-3053
Mechanical Assembly

200063053
1097-0005: RNCC: 3 | RNVC: 2

17 May 2011

5340-21-880-7120
Electrical-Mechanical Equipment Post

218807120
512205-0025-000: RNCC: 3 | RNVC: 2

10 Jul 1979

5340-21-864-1777
Expansion Shield

218641777
101-01090: RNCC: 3 | RNVC: 2
101-1036: RNCC: 3 | RNVC: 2
1036: RNCC: 3 | RNVC: 2

16 Dec 1971

5340-21-921-4207
Loop Clamp

219214207
ST1478-05: RNCC: 3 | RNVC: 2

7 Nov 2001

5340-21-660-0900
Barrel Bolt

216600900
1077: RNCC: 3 | RNVC: 1
1077-3: RNCC: 3 | RNVC: 2
130-2543: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-001-6257
Cushioning Pad

200016257
717-546: RNCC: 3 | RNVC: 2
224-05-PL ITEM 39: RNCC: 6 | RNVC: 9

16 Sep 2004

5340-20-003-8515
Mounting Plate

200038515
10662933-011PEG: RNCC: 3 | RNVC: 2

17 Jan 2008

5340-21-905-5636
Mounting Bracket

219055636
704-132651-001-3: RNCC: 3 | RNVC: 2

1 Aug 1989

5340-21-844-4410

5340-20-006-8504
Cushioning Pad

200068504
1028805-1: RNCC: 3 | RNVC: 2

18 Apr 2012

5340-21-914-2771
General Purpose Resilient Mount

219142771
501-401-0005: RNCC: 3 | RNVC: 2
501-401-0005: RNCC: 5 | RNVC: 9

21 Aug 1997

5340-21-914-8074
Mounting Plate

219148074
1237-292-11: RNCC: 3 | RNVC: 2

12 Aug 1998

5340-21-908-4288
Access Door Hinge

219084288
215-33159-10: RNCC: 3 | RNVC: 2

27 May 1992

5340-20-007-7580
Mounting Bracket

200077580
10683465-011PG: RNCC: 3 | RNVC: 2
10683465: RNCC: D | RNVC: 9

8 Jul 2013

5340-20-003-5755
Upper Support Apu

200035755
B22300-16-1: RNCC: 3 | RNVC: 2

17 Sep 2007

5340-21-890-4781
Snap Ring

218904781
202550621: RNCC: 3 | RNVC: 2

24 Oct 1982

5340-20-006-3642
Mounting Bracket

200063642
85310353-001: RNCC: 3 | RNVC: 2

21 Jun 2011

5340-21-877-3253
Pipe Bracket

218773253
65-1: RNCC: 3 | RNVC: 2
65-1IN: RNCC: 3 | RNVC: 2
5340-5526: RNCC: 6 | RNVC: 9

18 Oct 1977

5340-20-002-4686
Mounting Plate

200024686
604-21030-1: RNCC: 3 | RNVC: 2
604-21030: RNCC: D | RNVC: 9

17 Jan 2006

5340-21-860-5436
Barrel Bolt

218605436
1084-6: RNCC: 3 | RNVC: 1
69GP6: RNCC: 4 | RNVC: 1
5340-5017: RNCC: 6 | RNVC: 9

15 Oct 1970

5340-20-005-2788
Retaining Strap

200052788
0656-039993-10: RNCC: 3 | RNVC: 2

27 Jan 2010

5340-21-905-5077
Extension Drawer Slide

219055077
8560982-901: RNCC: 3 | RNVC: 2

5 Jul 1988

5340-20-002-0560
Mounting Bracket

200020560
10624756-PW: RNCC: 3 | RNVC: 2

19 May 2005

5340-21-859-4999
Webbing Strap

218594999
70927: RNCC: 3 | RNVC: 2
617-800162-000: RNCC: 3 | RNVC: 2

15 Oct 1970

5340-21-878-7187
Cover

218787187
10501143: RNCC: 3 | RNVC: 2
24018220-07: RNCC: 3 | RNVC: 2

21 Feb 1978

5340-20-001-0043
Mounting Plate

200010043
10657325-001PEG: RNCC: 3 | RNVC: 2

5 Sep 2003

5340-20-003-1124
Mounting Bracket

200031124
722487-001: RNCC: 3 | RNVC: 2

27 Dec 2006

5340-20-006-3615
Angle Bracket

200063615
83210380-101: RNCC: 3 | RNVC: 2

20 Jun 2011

Load More Results