What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

Hardware, Commercial - Canada (CA)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Canada (CA) - NCB is 20 or 21

Page 49 of 64

NSN Format for Hardware, Commercial
Codified by Canada

53	40	21	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Canada (CA)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 190 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 63 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 26 Items
What is a Rod End Connector? 44 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 69 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 226 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 94 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 20 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 582 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 43 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 202 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 65 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Shelf Bracket? 33 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Door Hook And Eye? 22 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 77 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 12 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 23 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 23 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 44 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 13 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is a Friction Catch? 38 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 15 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 39 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 26 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 86 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 20 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 42 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 91 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 57 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 25 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 163 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 101 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 21 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 16 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 288 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 52 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 23 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 131 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 24 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 41 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 70 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 45 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 210 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 163 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 82 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 44 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 38 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 25 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 20 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 42 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 18 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Glazier Point? 10 Items: A Glazier Point (POINT,GLAZIER) is a piece of thin sheet metal, triangular or diamond shaped, designed to hold a pane of glass in a wooden sash.
What is an Angle Bracket? 1105 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 81 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 32 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1130 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 20 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 49 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 37 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Quick Release Plunger? 13 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 114 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flush Catch? 97 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 13 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 86 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 115 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 177 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 24 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 53 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 219 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 40 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 494 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 353 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 55 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 51 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 12 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 601 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 32 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 39 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 34 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 41 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 21 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping? 19 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 93 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 117 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 31 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 45 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 19 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 832 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 35 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 40 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 75 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 106 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Picture Hanger? 10 Items: A Picture Hanger (HANGER,PICTURE) is a hook like device that is secured to walls, bulkheads, columns and the like, by means of a nail, screw, magnet or adhesive backed cloth, that is included with and/or attached to the hook. It is designed to hold and suspend variuos items such as photographs, paintings, maps, documents, etc.
What is a Protection Bellows? 16 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 57 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 49 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 2535 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 19 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 16 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 1222 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 48 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 64 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Threaded Hinged Standoff? 11 Items: A Threaded Hinged Standoff (STANDOFF,HINGED,THREADED) is a standoff, internally and/or externally, threaded on both ends with a hinge or pivot point to allow for independent movement of the ends.
What is a Spacing Threaded Standoff? 178 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 115 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a Crank Handle? 13 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 29 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Mechanic Equipment Hardware Kit? 87 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Dust And Moisture Seal Protective Cover? 38 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 51 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 308 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 41 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 39 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 178 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 27 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 80 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 86 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 49 of 64

5340-21-877-3365
Rim Latch

218773365
3R6XC4W: RNCC: 3 | RNVC: 2

18 Oct 1977

5340-21-809-8174
Butt Hinge

218098174
ML7011223G1: RNCC: 3 | RNVC: 2
7011223G1: RNCC: 5 | RNVC: 2

20 Mar 1964

5340-20-004-4586
Assembly Bracket

200044586
B30801-012-1: RNCC: 3 | RNVC: 2
B30801-012: RNCC: 5 | RNVC: 2

18 Dec 2008

5340-21-874-3808
Pipe Bracket

218743808
FIGCT99-1 1-2: RNCC: 3 | RNVC: 2
CT99-1 1-2: RNCC: 5 | RNVC: 2

22 Mar 1977

5340-21-660-1158
Coat And Hat Hook

216601158
EAT01212: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-008-0117
Electronic Equipment Hardware Kit

200080117
218080-001: RNCC: 3 | RNVC: 2

16 Oct 2013

5340-20-003-8682
Angle Bracket

200038682
C5CM.121181-27: RNCC: 3 | RNVC: 2

25 Jan 2008

5340-21-912-9768
Tee Hinge

219129768
13163: RNCC: 3 | RNVC: 2

11 Jan 1996

5340-21-896-2607
Door Closer Cover

218962607
4020-72-L: RNCC: 3 | RNVC: 2

12 Aug 1984

5340-20-004-2962
Spring Tension Clip

200042962
086-102: RNCC: 3 | RNVC: 2
3000264: RNCC: 5 | RNVC: 2
3000264: RNCC: 5 | RNVC: 9

19 Sep 2008

5340-21-911-1436
Mounting Bracket

219111436
A161-57: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-20-007-5590
Access Door Hinge

200075590
M-P-50203-1-P: RNCC: 3 | RNVC: 2

2 Apr 2013

5340-20-004-0358
Access Cover

200040358
9877889-1: RNCC: 3 | RNVC: 2

14 Apr 2008

5340-20-001-0846
Webbing Strap

200010846
9279429-2: RNCC: 3 | RNVC: 2

24 Oct 2003

5340-21-803-8043
Flush Catch

218038043
NAS442-072-072: RNCC: 3 | RNVC: 2

5 Sep 1963

5340-21-879-5359
Lock

218795359
99-13: RNCC: 3 | RNVC: 2

22 Aug 1978

5340-21-868-8969
Key

218688969
KEY-249165: RNCC: 3 | RNVC: 2
841MK: RNCC: 5 | RNVC: 2
5340-5089: RNCC: 6 | RNVC: 9

21 Nov 1973

5340-20-004-0313
Door Assembly

200040313
9877859-1: RNCC: 3 | RNVC: 2

14 Apr 2008

5340-21-868-9448
Barrel Bolt

218689448
1078: RNCC: 3 | RNVC: 1
1078C2G-6: RNCC: 3 | RNVC: 2

31 Jul 1974

5340-21-870-9739
Catch

218709739
2370-1134P1: RNCC: 3 | RNVC: 2
0035-2772: RNCC: 6 | RNVC: 9

15 Sep 1976

5340-21-901-8046
Angle Bracket

219018046
R2-192904: RNCC: 3 | RNVC: 2

22 Apr 1986

5340-21-866-9132
Rigid Caster

218669132
14TM08201RSP: RNCC: 3 | RNVC: 2

16 Jun 1972

5340-21-908-0920
Loop Clamp

219080920
1123-B: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-21-859-0014
Corrosion Preventive Anode

218590014
5340STD100-89C: RNCC: 3 | RNVC: 2
P5B2: RNCC: 3 | RNVC: 2
EFL-Z-23.5A: RNCC: 3 | RNVC: 2

16 Apr 1970

5340-20-002-7538
Access Cover

200027538
PWC38179: RNCC: 3 | RNVC: 2

5 Jun 2006

5340-20-001-8010
Retaining Plate

200018010
GM3-M3505A: RNCC: 3 | RNVC: 2

30 Dec 2004

5340-20-005-6005
Double Angle Bracket

200056005
AC40120-22: RNCC: 3 | RNVC: 2

19 May 2010

5340-21-803-4269

5340-21-109-1555

5340-21-106-9475

5340-20-002-4061
Angle Bracket

200024061
130014DE334-1: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-20-006-6633
Angle Bracket

200066633
0775840-1: RNCC: 3 | RNVC: 2

13 Jan 2012

5340-21-912-6791
Turnbuckle

219126791
8762111-3: RNCC: 3 | RNVC: 2

16 Sep 1995

5340-21-860-5797
Clevis

218605797
FCM2092-1: RNCC: 3 | RNVC: 2

15 Oct 1970

5340-20-004-0675
Mounting Plate

200040675
0775833-1: RNCC: 3 | RNVC: 2

29 Apr 2008

5340-21-879-5273
Antipilferage Seal

218795273
PR1035: RNCC: 3 | RNVC: 1
PR0NGL0K 4: RNCC: 5 | RNVC: 1

27 Jun 1978

5340-21-921-0043
Cover Assembly.

219210043
3116567-01: RNCC: 3 | RNVC: 2

23 Jan 2001

5340-21-911-1225
Synchro Clamp

219111225
SQ31: RNCC: 3 | RNVC: 2

2 Nov 1993

5340-21-911-1387
Mounting Bracket

219111387
8105-82: RNCC: 3 | RNVC: 2

10 Dec 1993

5340-20-002-1604
Access Cover

200021604
10656038-001: RNCC: 3 | RNVC: 2
10656038: RNCC: D | RNVC: 9

13 Jul 2005

5340-21-808-0328
Retaining Strap

218080328
25824-01-6-231: RNCC: 3 | RNVC: 2

7 Mar 1964

5340-21-866-9471
Doorstop

218669471
2254BE: RNCC: 3 | RNVC: 1

14 Jul 1972

5340-21-877-3462
Mortise Lock Set

218773462
D80PD26D: RNCC: 3 | RNVC: 2
D80PD626: RNCC: 3 | RNVC: 2

18 Oct 1977

5340-21-868-9457
Butt Hinge

218689457
184C4: RNCC: 3 | RNVC: 1

2 Aug 1974

5340-21-814-3962
Pipe Bracket

218143962
473978-3: RNCC: 3 | RNVC: 2
HS1-4432: RNCC: 5 | RNVC: 2

9 Jun 1964

5340-21-804-1907

5340-21-803-4346

5340-20-005-1329
Mounting Plate

200051329
B30603-244-1: RNCC: 3 | RNVC: 2

30 Oct 2009

5340-20-000-0965
Dust And Moisture Seal Protective Plug

200000965
5659-10: RNCC: 3 | RNVC: 1
TM-12-G: RNCC: 3 | RNVC: 2
10608650-2: RNCC: 7 | RNVC: 2

2 May 2002

5340-21-876-2056
Bracket

218762056
D64-3299U1555: RNCC: 3 | RNVC: 2
442703C91: RNCC: 5 | RNVC: 2

30 Aug 1977

5340-21-913-1252
Mounting Plate

219131252
9578126-1: RNCC: 3 | RNVC: 2

19 Sep 1996

5340-21-899-9701
Access Cover

218999701
8384318-1: RNCC: 3 | RNVC: 2
15783843181: RNCC: 5 | RNVC: 2

6 Sep 1985

5340-21-912-3493
Rod End Clevis

219123493
WW 488158: RNCC: 3 | RNVC: 2
59.51.177.A: RNCC: 5 | RNVC: 2

7 Jan 1995

5340-20-004-5606
Bumper

200045606
0877844-1: RNCC: 3 | RNVC: 2

11 Feb 2009

5340-21-911-9543
Release Latch

219119543
9279760-1: RNCC: 3 | RNVC: 2

28 Sep 1994

5340-21-905-5351
Dust And Moisture Seal Protective Cap

219055351
CF 473 032-R: RNCC: 3 | RNVC: 2
CF473032-R: RNCC: 3 | RNVC: 2

11 Jan 1989

5340-21-864-9357
Spring Tension Clip

218649357
12053: RNCC: 3 | RNVC: 2

14 Jul 1972

5340-21-913-6469
Sash Pulley

219136469
21133B: RNCC: 3 | RNVC: 2

3 Jan 1997

5340-21-913-6535
Mounting Plate

219136535
10504325-PT: RNCC: 3 | RNVC: 2

6 Mar 1997

5340-21-913-6541
Latch Bar

219136541
10608166: RNCC: 3 | RNVC: 2

7 Mar 1997

5340-21-914-2661
Double Angle Bracket

219142661
E090827: RNCC: 3 | RNVC: 2

11 Jul 1997

5340-21-914-9176
Bracket Assembly

219149176
10555917: RNCC: 3 | RNVC: 2

16 Oct 1998

5340-21-920-2319
Webbing Strap

219202319
10638454-15: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-21-804-0080
Seal

218040080
LS3842-3: RNCC: 3 | RNVC: 2

5 Sep 1963

5340-21-896-2878
Rod End Clevis

218962878
84458-5: RNCC: 3 | RNVC: 2

2 Sep 1984

5340-21-912-5779
Tie-Rod Assembly

219125779
8729271-2: RNCC: 3 | RNVC: 2

24 Jun 1995

5340-20-000-0725
Angle Bracket

200000725
9379520-1: RNCC: 3 | RNVC: 2

25 Apr 2002

5340-21-879-5274
Antipilferage Seal

218795274
PR1035: RNCC: 3 | RNVC: 1
PR0NGL0K 4: RNCC: 5 | RNVC: 1

27 Jun 1978

5340-21-880-7003
Rod End Clevis

218807003
834933-1: RNCC: 3 | RNVC: 2

26 Jun 1979

5340-21-905-5327
Butt Hinge

219055327
8281325-1: RNCC: 3 | RNVC: 2
15010871579: RNCC: 5 | RNVC: 2

17 Dec 1988

5340-21-914-4778
Webbing Strap

219144778
9278394-1: RNCC: 3 | RNVC: 2
LS00983: RNCC: 5 | RNVC: 2

5 Dec 1997

5340-20-007-3797
Mounting Bracket

200073797
10707095-011PG: RNCC: 3 | RNVC: 2
10707095: RNCC: D | RNVC: 9

10 Jan 2013

5340-21-862-5202
Bow Handle

218625202
1083: RNCC: 3 | RNVC: 2
1083-17: RNCC: 3 | RNVC: 2

13 May 1971

5340-20-007-6684
Mounting Bracket

200076684
10703009-011PW: RNCC: 3 | RNVC: 2
10703009: RNCC: D | RNVC: 9

27 May 2013

5340-21-660-0873
Sash Balance

216600873
7A: RNCC: 3 | RNVC: 2
130-2071: RNCC: 6 | RNVC: 9
130-2073: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-888-1413
Pcb Guide

218881413
512206-0206: RNCC: 3 | RNVC: 2

24 Jan 1982

5340-21-905-5530
Mounting Bracket

219055530
CU 310 376 A: RNCC: 3 | RNVC: 2

20 May 1989

5340-20-008-1464
Mounting Bracket

200081464
10707758-011PG: RNCC: 3 | RNVC: 2
10707758: RNCC: D | RNVC: 9

28 Nov 2013

5340-21-905-5770
Swivel Caster

219055770
121-2SB: RNCC: 3 | RNVC: 2

23 Nov 1989

5340-21-905-5759
Headless Straight Rod

219055759
8875171: RNCC: 3 | RNVC: 2

24 Oct 1989

5340-21-311-9456
Retaining Strap

213119456
J862-12: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-005-0086
Mounting Bracket

200050086
AC16017-06: RNCC: 3 | RNVC: 2
AC16017: RNCC: 5 | RNVC: 1

13 Aug 2009

5340-21-910-8678
Clamping Catch

219108678
TE30003885-001: RNCC: 3 | RNVC: 2

15 Jun 1993

5340-21-908-3286
Expansion Plug

219083286
900 03 98 9480: RNCC: 3 | RNVC: 2

12 Sep 1991

5340-20-004-1341
Access Cover

200041341
6LE40923000: RNCC: 3 | RNVC: 2

22 May 2008

5340-21-844-2510
Bow Handle

218442510
1427N: RNCC: 3 | RNVC: 2
FCE1312: RNCC: 5 | RNVC: 2

18 Aug 1972

5340-20-002-8839
Cover Strap

200028839
C4H1116-29: RNCC: 3 | RNVC: 2

11 Aug 2006

5340-20-001-4575
General Purpose Access Door

200014575
GD239-6775-1: RNCC: 3 | RNVC: 2

28 May 2004

5340-21-896-2346
Loop Clamp

218962346
CLAMP2-3/4IN: RNCC: 3 | RNVC: 2

1 Jul 1984

5340-20-003-0296
General Purpose Access Door

200030296
C91001-044-1: RNCC: 3 | RNVC: 2

17 Nov 2006

5340-20-003-3045
Adapter Plate

200033045
B30601-087-1: RNCC: 3 | RNVC: 2

16 Apr 2007

5340-21-908-0020
Support

219080020
704-132301-001-0: RNCC: 3 | RNVC: 2

26 May 1990

5340-20-002-4097
Angle Bracket

200024097
130014DE417-1: RNCC: 3 | RNVC: 2
130014DE417: RNCC: D | RNVC: 9

15 Dec 2005

5340-21-112-2265
Retaining Strap

211122265
SN7-3-38X: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-001-2242
Access Cover

200012242
GD421-7890-5: RNCC: 3 | RNVC: 2

21 Jan 2004

5340-21-871-1727
Mounting Bracket

218711727
NO PRIMARY REF 21-871-1727: RNCC: 3 | RNVC: 2

26 Nov 1974

5340-20-007-9767
Mounting Bracket

200079767
0875227-1: RNCC: 3 | RNVC: 2

3 Oct 2013

5340-20-005-7237
Mounting Bracket

200057237
0678211-1: RNCC: 3 | RNVC: 2

13 Jul 2010

5340-20-007-6237
Angle Bracket

200076237
215T60631-6: RNCC: 3 | RNVC: 2

1 May 2013

5340-21-911-8319
Dust And Moisture Seal Protective Cap

219118319
PK1301: RNCC: 3 | RNVC: 2

29 Apr 1994

5340-21-914-0838
Mounting Bracket

219140838
10556181: RNCC: 3 | RNVC: 2

26 Apr 1997

5340-21-914-9180
Inseparable Bracket

219149180
10556536: RNCC: 3 | RNVC: 2

16 Oct 1998

5340-21-921-5688
Mounting Bracket

219215688
10638504-PG: RNCC: 3 | RNVC: 2

17 Jan 2002

5340-21-852-7691
Swivel Caster

218527691
4814: RNCC: 3 | RNVC: 2

27 Jan 1969

5340-20-004-0870
Latch Assembly

200040870
0776236-1: RNCC: 3 | RNVC: 2

7 May 2008

5340-20-002-4366
Angle Bracket

200024366
10664110-011PW: RNCC: 3 | RNVC: 2
10664110: RNCC: D | RNVC: 9

5 Jan 2006

5340-21-920-9132
Tie-Rod Assembly.

219209132
8729291-3: RNCC: 3 | RNVC: 2

17 Nov 2000

5340-21-912-3277
General Purpose Resilient Mount

219123277
9277607-1: RNCC: 3 | RNVC: 2

25 Mar 1995

5340-20-000-2292
Double Angle Bracket

200002292
9378941-1: RNCC: 3 | RNVC: 2

18 Jun 2002

5340-20-002-8538
Gre Adapter Bracket

200028538
B40603-192-1: RNCC: 3 | RNVC: 2

21 Jul 2006

5340-20-004-7162
Mounting Plate

200047162
R0066267-0102: RNCC: 3 | RNVC: 2

1 Apr 2009

5340-21-890-4960
Pipe Bracket

218904960
CT-65(0.750): RNCC: 3 | RNVC: 2
CT-65(0.750): RNCC: 3 | RNVC: 2

14 Nov 1982

5340-20-005-5851
Mounting Bracket

200055851
AC40316-08: RNCC: 3 | RNVC: 2

18 May 2010

5340-21-895-0139
Angle Bracket

218950139
2C-2063A-00: RNCC: 3 | RNVC: 2

7 Jan 1984

5340-21-908-4860
Access Cover

219084860
454 441: RNCC: 3 | RNVC: 2

29 Oct 1992

5340-21-920-5793
Loop Clamp

219205793
D2681: RNCC: 3 | RNVC: 2

29 Mar 2000

5340-20-007-6739
Mounting Bracket

200076739
10706873-011PEW: RNCC: 3 | RNVC: 2
10706873: RNCC: D | RNVC: 9

28 May 2013

5340-21-851-3942
Rope Cleat

218513942
51-3501: RNCC: 3 | RNVC: 2

6 Oct 1968

5340-21-914-1616
Turnbuckle

219141616
022-2478-05: RNCC: 3 | RNVC: 2

3 Jul 1997

5340-21-905-5383
Rod End Clevis

219055383
5184980-19: RNCC: 3 | RNVC: 2

3 Mar 1989

5340-21-913-8780
Double Angle Bracket

219138780
9575912-1: RNCC: 3 | RNVC: 2
9575912-1: RNCC: 5 | RNVC: 2

18 Mar 1997

5340-20-006-4865
Loop Clamp

200064865
DSC393-4: RNCC: 3 | RNVC: 2

1 Sep 2011

5340-20-000-1444
Mounting Bracket

200001444
10655608-011PW: RNCC: 3 | RNVC: 2

13 May 2002

5340-20-001-1544
Mounting Plate

200011544
10656362-001PEG: RNCC: 3 | RNVC: 2

28 Nov 2003

5340-21-877-3034
Retaining Clip

218773034
35205: RNCC: 3 | RNVC: 1

11 Oct 1977

5340-21-905-5252
Swivel Caster

219055252
12-24-XD: RNCC: 3 | RNVC: 2

3 Nov 1988

5340-21-914-8650
Caster Wheel

219148650
1205-1026-11: RNCC: 3 | RNVC: 2

21 Aug 1998

5340-20-000-8661
Locking Stay

200008661
9575856-2: RNCC: 3 | RNVC: 2
9575856: RNCC: D | RNVC: 9

2 Jul 2003

5340-21-905-5777
Clamp Bolt Assembly

219055777
SLR2-BB: RNCC: 3 | RNVC: 1
PS95766-02: RNCC: 3 | RNVC: 2

12 Dec 1989

5340-21-841-0675
Plug

218410675
3288284-1: RNCC: 3 | RNVC: 2

26 Nov 1965

5340-21-870-9985
Landing Gea Bracket

218709985
188022LH: RNCC: 3 | RNVC: 2

24 Nov 1976

5340-20-002-5858
Small Cover

200025858
2005F03-04451: RNCC: 3 | RNVC: 2

20 Mar 2006

5340-20-007-0898
Helical Compression Spring Retainer

200070898
1176939: RNCC: 1 | RNVC: 2
05450: RNCC: 3 | RNVC: 2
2037-182: RNCC: 5 | RNVC: 2

16 Aug 2012

5340-21-866-9484
Expansion Shield

218669484
3645-3: RNCC: 3 | RNVC: 2

14 Jul 1972

5340-21-921-0155
Blanking Plate.

219210155
0078514-1: RNCC: 3 | RNVC: 2

26 Jan 2001

5340-21-921-4674
Webbing Strap

219214674
0078458-2: RNCC: 3 | RNVC: 2

23 Nov 2001

5340-20-001-6143
Access Cover

200016143
ATI400295: RNCC: 3 | RNVC: 2
MEC000008: RNCC: 5 | RNVC: 9

14 Sep 2004

5340-20-006-3031
Multiple Angle Bracket

200063031
24-8097: RNCC: 3 | RNVC: 2

16 May 2011

5340-20-000-2953
Webbing Strap

200002953
10607670-48: RNCC: 3 | RNVC: 2

23 Jul 2002

5340-20-005-2049
General Purpose Resilient Mount

200052049
CA000061001: RNCC: 3 | RNVC: 2

9 Dec 2009

5340-20-007-5856
Mounting Bracket

200075856
122571: RNCC: 3 | RNVC: 2

17 Apr 2013

5340-21-878-7175
Seal Retaining Plate

218787175
10501179: RNCC: 3 | RNVC: 2
24017400.01: RNCC: 3 | RNVC: 2

21 Feb 1978

5340-21-913-6521
Access Door

219136521
10558057: RNCC: 3 | RNVC: 2

21 Feb 1997

5340-21-908-5015
Broche

219085015
SD10544-1: RNCC: 3 | RNVC: 2

20 Jan 1993

5340-20-001-9115
Mounting Plate

200019115
10555866-1: RNCC: 3 | RNVC: 2

28 Feb 2005

5340-21-920-8713
Link

219208713
06276025: RNCC: 3 | RNVC: 2

25 Oct 2000

5340-21-866-9136
Butt Hinge

218669136
101-4PA: RNCC: 3 | RNVC: 2

16 Jun 1972

5340-20-003-1289
Access Cover

200031289
10664228-011PW: RNCC: 3 | RNVC: 2

5 Jan 2007

5340-20-000-2479
Mounting Plate

200002479
9378980-1: RNCC: 3 | RNVC: 2

26 Jun 2002

5340-20-007-3640
Mounting Bracket

200073640
0677551: RNCC: 3 | RNVC: 2

3 Jan 2013

5340-21-910-8727
Angle Bracket

219108727
8668310-3: RNCC: 3 | RNVC: 2

1 Jul 1993

5340-21-921-4777
Mounting Bracket

219214777
B61000-170-2: RNCC: 3 | RNVC: 2

29 Nov 2001

5340-20-000-0187
Mounting Bracket

200000187
10655416-011PEG: RNCC: 3 | RNVC: 2

11 Apr 2002

5340-20-006-9132
Mounting Bracket

200069132
10692971-011PG: RNCC: 3 | RNVC: 2

23 May 2012

5340-21-712-7023
Swivel Caster

217127023
1640A8: RNCC: 3 | RNVC: 2
U140A8: RNCC: 3 | RNVC: 2
4G2939: RNCC: 3 | RNVC: 2

26 Mar 1965

5340-21-908-4359
Access Cover

219084359
CF 807 281 AE: RNCC: 3 | RNVC: 2

25 Jun 1992

5340-20-000-3286
Modification Kit.

200003286
9051245: RNCC: 3 | RNVC: 2

6 Aug 2002

5340-20-000-3180
Mounting Plate

200003180
9380476-1: RNCC: 3 | RNVC: 2

2 Aug 2002

5340-20-002-4170
Mounting Plate

200024170
10660391-001: RNCC: 3 | RNVC: 2
10660391: RNCC: D | RNVC: 9

19 Dec 2005

5340-21-910-8758
Electrical-Mechanical Equipment Post

219108758
8763839-1: RNCC: 3 | RNVC: 2

1 Jul 1993

5340-21-660-2286
Handwheel

216602286
0-0: RNCC: 3 | RNVC: 1

6 Jun 1968

5340-20-000-0497
Webbing Strap

200000497
8603-9: RNCC: 3 | RNVC: 2
1055277-9: RNCC: 5 | RNVC: 2

17 Apr 2002

5340-20-006-8067
General Purpose Access Door

200068067
1005200: RNCC: 3 | RNVC: 2

26 Mar 2012

5340-20-007-7063
Access Cover

200077063
111579: RNCC: 3 | RNVC: 2

13 Jun 2013

5340-21-912-7540
Mounting Bracket

219127540
10556176: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-21-913-6544
Retaining Band

5340-21-914-1570
Mounting Plate

219141570
10557808: RNCC: 3 | RNVC: 2

15 May 1997

5340-21-914-1588
Double Angle Bracket

219141588
10514581-PW: RNCC: 3 | RNVC: 2

3 Jun 1997

5340-21-914-2674
Mounting Plate

219142674
10617249: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-21-914-4234
Assembly Cover

219144234
10626618: RNCC: 3 | RNVC: 2

30 Jan 1998

5340-21-921-3638
Metallic Bumper

219213638
10628591-PG: RNCC: 3 | RNVC: 2

19 Oct 2001

5340-20-000-0255
Mounting Plate

200000255
10642457-PW: RNCC: 3 | RNVC: 2

12 Apr 2002

5340-21-913-4869
Mounting Bracket

219134869
VD-96-00147: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-21-913-8855
Angle Bracket

219138855
9575859-1: RNCC: 3 | RNVC: 2

15 Mar 1997

5340-21-911-9598
Turnbuckle

219119598
9280187-1: RNCC: 3 | RNVC: 2

21 Oct 1994

5340-20-000-2537
Mounting Bracket

200002537
9379245-1: RNCC: 3 | RNVC: 2

28 Jun 2002

5340-21-884-0798
Butt Hinge

218840798
638-2-6869: RNCC: 3 | RNVC: 2

21 Apr 1981

5340-20-007-0702
Mounting Bracket

200070702
1176807-1: RNCC: 1 | RNVC: 2
2037-559: RNCC: 3 | RNVC: 2

13 Aug 2012

5340-21-908-4066
Angle Bracket

219084066
TE20002344-002: RNCC: 3 | RNVC: 2

25 Apr 1992

5340-21-840-9277
Doorstop

218409277
69GP6: RNCC: 3 | RNVC: 1
3780: RNCC: 3 | RNVC: 2
EA3780: RNCC: 5 | RNVC: 2

6 Jun 1968

5340-21-629-5062
Resilient Mount

216295062
288FIG6RCNTYPEKK: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-891-5304
Push Door Plate

218915304
N0-REF: RNCC: 3 | RNVC: 2

4 Dec 1982

5340-20-006-3390
Mechanic Equipment Hardware Kit

200063390
1080220-1: RNCC: 3 | RNVC: 2

8 Jun 2011

5340-21-108-3851

5340-21-912-3261
Multiple Eye Pad

219123261
8727868-8: RNCC: 3 | RNVC: 2

24 Jun 1995

5340-21-905-5522
Resilient Mount

219055522
C 3695 842-3: RNCC: 3 | RNVC: 2

6 May 1989

5340-21-914-1917
Lever Spindle

219141917
1237-231-1: RNCC: 3 | RNVC: 2

30 Jul 1998

5340-21-911-9612
Spacing Threaded Standoff

219119612
608-172: RNCC: 3 | RNVC: 2

29 Oct 1994

5340-20-004-0545
Spray Diverter

200040545
7405-047-1: RNCC: 3 | RNVC: 2

25 Apr 2008

5340-20-001-4753
Double Angle Bracket

200014753
10625977: RNCC: 3 | RNVC: 2

3 Jun 2004

5340-21-908-5310
Mechanic Equipment Hardware Kit

219085310
20154: RNCC: 3 | RNVC: 2

8 Apr 1993

5340-21-660-1161
Coat And Hat Hook

216601161
J01232: RNCC: 3 | RNVC: 2
T01232J: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-841-8567
Swivel Caster

218418567
9706-0C: RNCC: 3 | RNVC: 2
97060C: RNCC: 3 | RNVC: 2
9706-0C: RNCC: 3 | RNVC: 2
97060C: RNCC: 5 | RNVC: 2

6 Jun 1968

5340-20-004-3225
Cap

200043225
TE10008150-001: RNCC: 3 | RNVC: 2
3887001570: RNCC: 5 | RNVC: 2

30 Sep 2008

5340-20-004-8826
Lock-Release Lever

200048826
0669-767776-10: RNCC: 3 | RNVC: 2

8 Jun 2009

5340-21-868-9241
Door Closer

218689241
SK80: RNCC: 3 | RNVC: 2
5340-5253: RNCC: 6 | RNVC: 9

23 Apr 1974

5340-21-905-5300
Vent Plug

219055300
8559824-1: RNCC: 3 | RNVC: 2

3 Dec 1988

5340-21-884-0014
Angle Bracket

218840014
11-875-1: RNCC: 3 | RNVC: 2

13 Nov 1980

5340-20-002-4074
Angle Bracket

200024074
130014DE339-1: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-20-006-0038
Mounting Bracket

200060038
0656-035766-03: RNCC: 3 | RNVC: 2

17 Dec 2010

5340-21-880-7079
Loop Clamp

218807079
72-580: RNCC: 3 | RNVC: 2

17 Jul 1979

5340-20-005-7050
Loop Clamp

200057050
50-40-0056: RNCC: 3 | RNVC: 2

29 Jun 2010

5340-20-000-0436
Double Angle Bracket

200000436
10655293-001PW: RNCC: 3 | RNVC: 2

16 Apr 2002

5340-20-006-4102
Mounting Bracket

200064102
AC86695-06: RNCC: 3 | RNVC: 2

11 Jul 2011

5340-20-006-9080
Mounting Bracket

200069080
1176918-1: RNCC: 1 | RNVC: 2
05182-1: RNCC: 3 | RNVC: 2
2037-606: RNCC: 3 | RNVC: 2

22 May 2012

5340-20-001-0838
Webbing Strap

200010838
9278809-4: RNCC: 3 | RNVC: 2

24 Oct 2003

5340-21-914-0829
Angle Bracket

219140829
9575959-1: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-21-920-2294
Handle Grip

219202294
AED 69505-8: RNCC: 3 | RNVC: 2
AED 69505-8: RNCC: 5 | RNVC: 9

13 Jul 1999

5340-21-905-5096
Right Ha Half Hinge

5340-21-905-5120

5340-21-905-5198

5340-21-660-1196
Screw Hook

216601196
1181: RNCC: 3 | RNVC: 1
1181-5-8IN: RNCC: 3 | RNVC: 2
131-8924: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-005-4248
Multiple Angle Bracket

200054248
B61001-064-1: RNCC: 3 | RNVC: 2

7 Apr 2010

5340-21-908-4460
Webbing Strap

219084460
9048585: RNCC: 3 | RNVC: 2

10 Jul 1992

5340-21-908-5308
Mechanic Equipment Hardware Kit

219085308
20151: RNCC: 3 | RNVC: 2

8 Apr 1993

5340-21-853-6802
Flush Catch

218536802
111857131: RNCC: 3 | RNVC: 2

11 Jan 1969

5340-21-863-4235
Pipe Bracket

218634235
460-3405: RNCC: 3 | RNVC: 2

16 Dec 1971

5340-21-882-8370
Angle Bracket

218828370
AP669933: RNCC: 3 | RNVC: 2

26 Jun 1980

5340-21-878-0942
Dust And Moisture Seal Protective Cap

218780942
9L6439: RNCC: 3 | RNVC: 2

18 Apr 1978

5340-21-911-1479
Hand Carrying Strap Assembly

219111479
0 21200 86489 6: RNCC: 3 | RNVC: 2

17 Sep 1994

5340-21-876-2208
Lock

218762208
36492: RNCC: 3 | RNVC: 2

20 Sep 1977

5340-21-876-2122
Rim Clenching Clamp

218762122
00460076: RNCC: 3 | RNVC: 2

13 Sep 1977

5340-21-905-5957
Angle Bracket

219055957
704-133400-921-0: RNCC: 3 | RNVC: 2

20 Apr 1990

5340-21-908-4037
Engine Accessory Bracket

219084037
215-60047: RNCC: 3 | RNVC: 2

23 May 1992

5340-21-876-2077
Access Cover

218762077
10012: RNCC: 3 | RNVC: 2

6 Sep 1977

5340-21-908-3284
Expansion Plug

219083284
900 03 98 9289: RNCC: 3 | RNVC: 2

12 Sep 1991

5340-20-007-2199
Dust And Moisture Seal Protective Plug

200072199
7124: RNCC: 3 | RNVC: 2

24 Oct 2012

5340-21-879-5980
Handle Grip

218795980
10011-3: RNCC: 3 | RNVC: 1

1 May 1979

5340-21-848-2530
Loop Clamp

218482530
739-18: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-855-1428

5340-20-006-9424
Angle Bracket

200069424
A20618-162-1: RNCC: 3 | RNVC: 2

8 Jun 2012

5340-20-000-5656
Mounting Plate

200005656
10655704-001PW: RNCC: 3 | RNVC: 2
10655704: RNCC: D | RNVC: 9

5 Feb 2003

5340-20-004-0705
Mounting Bracket

200040705
127460701: RNCC: 3 | RNVC: 2

30 Apr 2008

5340-21-905-3612
Mounting Plate

219053612
3-100766: RNCC: 3 | RNVC: 2

27 Jul 1988

5340-21-891-5048
Spring Tension Clip

218915048
4-H-5-8: RNCC: 3 | RNVC: 2
4H58: RNCC: 5 | RNVC: 2
7003: RNCC: 5 | RNVC: 2
4-H-5-8: RNCC: 5 | RNVC: 2

21 Nov 1982

5340-21-901-8541
Sliding Door Track

219018541
8610500-14: RNCC: 3 | RNVC: 2

19 Feb 1987

5340-21-913-6489
Angle Bracket

219136489
9575833-1: RNCC: 3 | RNVC: 2

31 Jan 1997

5340-21-000-1355

5340-21-660-1173
Screw Hook

216601173
M6: RNCC: 3 | RNVC: 2
131-8979: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-890-4564
Helical Compression Spring Retainer

218904564
4381461320: RNCC: 3 | RNVC: 2

26 Sep 1982

5340-21-890-4471
Butt Hinge

218904471
4381361861: RNCC: 3 | RNVC: 2

23 Apr 1983

5340-21-800-2979
Angle Bracket

218002979
R2SAFEWAY: RNCC: 3 | RNVC: 2

5 Sep 1963

5340-21-103-7686
Buckle

211037686
DAD104310A: RNCC: 3 | RNVC: 2
104310A: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-864-2085
Mortise Latch

218642085
746688: RNCC: 3 | RNVC: 2

16 Dec 1971

5340-21-884-0081
Retaining Strap

218840081
46-49369: RNCC: 3 | RNVC: 2

26 Nov 1980

5340-21-886-5808
Expansion Shield

218865808
JS38C: RNCC: 3 | RNVC: 2

31 Aug 1981

5340-21-910-8787
Hinge

219108787
8461997-3: RNCC: 3 | RNVC: 2

9 Jul 1993

5340-21-903-1867
Mounting Bracket

219031867
A-811: RNCC: 3 | RNVC: 2

17 Jun 1987

5340-21-879-5881
Retaining Strap

218795881
84000161: RNCC: 3 | RNVC: 2

13 Mar 1979

5340-20-000-3966
Webbing Strap

200003966
10607394: RNCC: 3 | RNVC: 2

12 Sep 2002

5340-21-815-6634

5340-21-111-0259

5340-21-901-8620
Pipe Bracket

219018620
35812: RNCC: 3 | RNVC: 2

4 May 1987

5340-21-815-2853

5340-21-868-9049
Spindle And Plunger

218689049
7BAS26: RNCC: 3 | RNVC: 2
5340-5130: RNCC: 6 | RNVC: 9

31 Dec 1973

5340-21-905-5032
Expansion Shield

219055032
MS-38: RNCC: 3 | RNVC: 2

12 May 1988

5340-20-004-3688
General Purpose Resilient Mount

200043688
AC2828: RNCC: 3 | RNVC: 2
10716-05202: RNCC: 5 | RNVC: 2

24 Oct 2008

5340-21-920-1329
Mounting Bracket

219201329
9382669-1: RNCC: 3 | RNVC: 2

18 May 1999

5340-20-003-3981
Webbing Strap

200033981
1108-W: RNCC: 3 | RNVC: 2

13 Jun 2007

5340-21-913-4457
Webbing Strap

219134457
10607670-18: RNCC: 3 | RNVC: 2

27 May 1998

5340-21-913-0080
Cover

219130080
9276334: RNCC: 3 | RNVC: 2

1 Mar 1996

5340-21-897-8257
Cap

218978257
N0119074: RNCC: 3 | RNVC: 2

13 Dec 1984

5340-21-866-9190
Padlock

218669190
5MK: RNCC: 3 | RNVC: 2

16 Jun 1972

5340-21-112-5450
Toggle Lever Catch

211125450
YA12679: RNCC: 3 | RNVC: 2
0P3846S: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-007-3769
Threaded Rod End

200073769
26174: RNCC: 3 | RNVC: 2

9 Jan 2013

5340-21-908-0560
Access Door Hinge

219080560
04081409: RNCC: 3 | RNVC: 2

26 Jan 1991

5340-21-913-6524
Mounting Plate

219136524
10513636-PW: RNCC: 3 | RNVC: 2

28 Feb 1997

5340-21-914-1568
Manual Control Handle

219141568
10505201-PT: RNCC: 3 | RNVC: 2

15 May 1997

5340-21-914-1585
Rod End Clevis

219141585
10501364-PT: RNCC: 3 | RNVC: 2

31 May 1997

5340-21-914-9179
Butt Hinge

219149179
106007408: RNCC: 3 | RNVC: 2

16 Oct 1998

5340-21-920-7611
Mounting Bracket

219207611
25 1156 20 00 11: RNCC: 3 | RNVC: 2

28 Aug 2000

5340-20-001-6335
Mounting Bracket

200016335
10658630-011PG: RNCC: 3 | RNVC: 2
10658630: RNCC: D | RNVC: 9

22 Sep 2004

5340-21-882-8277
Swivel Caster

218828277
F5-9D: RNCC: 3 | RNVC: 2

11 Jun 1980

5340-21-884-0288
Butt Hinge

218840288
T7629-26: RNCC: 3 | RNVC: 2

24 Dec 1980

5340-21-914-2750
Manual Control Handle

219142750
WW458507A: RNCC: 3 | RNVC: 2
59.29.100.A: RNCC: 5 | RNVC: 2

11 Jul 1997

5340-21-908-4966
Mounting Bracket

219084966
157712-002: RNCC: 3 | RNVC: 2

8 Jan 1993

5340-20-003-9862
Pan Han Clamp Lever

200039862
8466-2006-00: RNCC: 3 | RNVC: 2

28 Mar 2008

5340-20-003-1545
Angle Bracket

200031545
10665101-001PW: RNCC: 3 | RNVC: 2
10665101-001: RNCC: 5 | RNVC: 1

16 Jan 2007

5340-21-892-4517
General Purpose Resilient Mount

218924517
636-7-9022: RNCC: 3 | RNVC: 2

29 Oct 1983

5340-20-000-1947
Webbing Strap

200001947
9379296-1: RNCC: 3 | RNVC: 2

6 Jun 2002

5340-21-911-1027
Bow Handle

219111027
9277987-1: RNCC: 3 | RNVC: 2

14 Sep 1993

5340-21-864-1609

5340-21-864-1595

5340-21-864-1121

5340-21-908-0887
Plain Solid Disk

219080887
8660668-01: RNCC: 3 | RNVC: 2

11 Jul 1991

5340-21-914-0844
Housing Cover

219140844
420-866-770: RNCC: 3 | RNVC: 2
F300 0T 019 4523: RNCC: 6 | RNVC: 9

1 May 1997

5340-21-855-1409
Resilient Mount

218551409
S3B80: RNCC: 3 | RNVC: 2

23 Jul 1969

5340-21-908-5242
Mechanic Equipment Hardware Kit

219085242
20265: RNCC: 3 | RNVC: 2

30 Mar 1993

5340-21-908-0586
Loop Clamp

219080586
8962268: RNCC: 3 | RNVC: 2
8962268: RNCC: 5 | RNVC: 2

5 Feb 1991

5340-20-001-2975
Mounting Bracket

200012975
0376148-1: RNCC: 3 | RNVC: 2
0376148: RNCC: D | RNVC: 9

9 Mar 2004

5340-20-005-7162
General Purpose Access Door

200057162
TE20000664-230: RNCC: 3 | RNVC: 2

7 Jul 2010

5340-20-000-0771
Butt Hinge

200000771
0078204-3: RNCC: 3 | RNVC: 2

26 Apr 2002

5340-20-003-7479
Access Cover

200037479
0078203-1: RNCC: 3 | RNVC: 2

23 Nov 2007

5340-20-004-0224
Mounting Bracket

200040224
0377293-1: RNCC: 3 | RNVC: 2

8 Apr 2008

5340-20-006-3825
Loop Clamp

200063825
83210060-003: RNCC: 3 | RNVC: 2

24 Jun 2011

5340-21-908-4768
Handwheel

219084768
TE30002844-002: RNCC: 3 | RNVC: 2

7 Oct 1992

5340-20-004-0434
Webbing Strap

200040434
0977492-1: RNCC: 3 | RNVC: 2

21 Apr 2008

5340-21-895-0346
Padlock

218950346
6B62XMW/COREA88: RNCC: 3 | RNVC: 2

4 Feb 1984

5340-21-920-0320
Angle Bracket

219200320
10607383: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-20-000-8653
Loop Clamp

200008653
991 12 54 0329: RNCC: 3 | RNVC: 2

27 Jun 2003

5340-21-862-6383
Expansion Shield

218626383
201-2205: RNCC: 3 | RNVC: 2
2260: RNCC: 3 | RNVC: 2

16 Sep 1971

5340-21-876-2165
Rod End Connector

218762165
759956C91: RNCC: 3 | RNVC: 2

20 Sep 1977

5340-21-868-9041
Door Holder

218689041
444A: RNCC: 3 | RNVC: 2

31 Dec 1973

5340-20-005-0377
Mounting Bracket

200050377
524-417744-000: RNCC: 3 | RNVC: 2

4 Sep 2009

5340-21-860-8181

5340-21-660-0144
Butt Hinge

216600144
1191-3-1-2: RNCC: 3 | RNVC: 2
2503ES48 A: RNCC: 3 | RNVC: 2
1191C4X31/2: RNCC: 5 | RNVC: 2

6 Jun 1968

5340-20-003-7536
General Purpose Access Door

200037536
0078329-1: RNCC: 3 | RNVC: 2

27 Nov 2007

5340-21-905-5852
Mounting Bracket

219055852
1107-03: RNCC: 3 | RNVC: 2

24 Feb 1990

5340-20-007-8971
Lock Block Assembly

200078971
AC15042-02: RNCC: 3 | RNVC: 2

11 Sep 2013

5340-20-006-3040
Mounting Bracket

200063040
215-26112-2: RNCC: 3 | RNVC: 2

17 May 2011

5340-20-003-4905
Mounting Plate

200034905
10665087-011: RNCC: 3 | RNVC: 2
10665087: RNCC: 5 | RNVC: 1

27 Jul 2007

5340-21-660-1816
Retaining Strap

216601816
701EAYMB: RNCC: 3 | RNVC: 2
460-1768: RNCC: 6 | RNVC: 9
305-9083: RNCC: 6 | RNVC: 9

25 May 1968

5340-20-005-3189
Mounting Plate

200053189
85332442-103: RNCC: 3 | RNVC: 2

18 Feb 2010

5340-21-891-6244
Retainer

218916244
8280731: RNCC: 3 | RNVC: 2
8280731-1: RNCC: 3 | RNVC: 2
16914001000: RNCC: 5 | RNVC: 2
16914001000: RNCC: 5 | RNVC: 2

21 Mar 1983

5340-21-921-2383
Webbing Strap

219212383
0078457-1: RNCC: 3 | RNVC: 2

17 Jul 2001

5340-20-006-3801
Hook Setter

200063801
1003316: RNCC: 3 | RNVC: 2
1003316: RNCC: 3 | RNVC: 9

23 Jun 2011

5340-21-920-0231
Angle Bracket

219200231
10616646: RNCC: 3 | RNVC: 2

10 Mar 1999

5340-21-913-8767
Access Door

219138767
9279427-1: RNCC: 3 | RNVC: 2

8 Mar 1997

5340-20-003-7680
Retaining Strap

200037680
293850077: RNCC: 3 | RNVC: 2

3 Jan 2008

5340-21-660-1024
Doorstop

216601024
TO3754C4: RNCC: 3 | RNVC: 2
64C4: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-905-5189
Cylinder Plug

219055189
33-406EX26D: RNCC: 3 | RNVC: 2

7 Oct 1988

5340-20-000-0248
Mounting Plate

200000248
10638875-PW: RNCC: 3 | RNVC: 2

12 Apr 2002

5340-20-006-1448
Angle Bracket

200061448
446-83033-2: RNCC: 3 | RNVC: 2

3 Mar 2011

5340-21-905-5033
Clamp Assembly

219055033
8717300-1: RNCC: 3 | RNVC: 2
100A1420: RNCC: 5 | RNVC: 2

12 May 1988

5340-21-920-4125
Ball Socket Seat

10 Nov 1999

5340-21-921-0296
Support Bar.

219210296
10597363: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-21-660-0797
Bow Handle

216600797
465 1-4: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-920-2768
Cushioning Pad

219202768
1028796-1: RNCC: 3 | RNVC: 2

16 Aug 1999

5340-20-008-7083

5340-20-012-9788

5340-20-010-8338

5340-21-884-0314
Door Handle

218840314
W197G11G4: RNCC: 3 | RNVC: 2

24 Dec 1980

5340-21-660-0660
Elbow Catch

216600660
E3675: RNCC: 3 | RNVC: 2

30 Nov 1965

5340-21-855-1410
Resilient Mount

218551410
S3B150: RNCC: 3 | RNVC: 2

23 Jul 1969

5340-21-920-0302
Angle Bracket

219200302
10607304: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-20-006-0387
Angle Bracket

200060387
1SI0176-421: RNCC: 3 | RNVC: 2

5 Jan 2011

5340-21-868-9969
Access Door Hinge

218689969
DL249: RNCC: 3 | RNVC: 2

25 Mar 1975

5340-20-001-2245
Access Cover

200012245
GD421-7900-3: RNCC: 3 | RNVC: 2

21 Jan 2004

5340-21-908-4110
Access Door

219084110
215-10096-802: RNCC: 3 | RNVC: 2

3 Jun 1992

5340-20-007-2142
Mounting Bracket

200072142
B30901-010-1: RNCC: 3 | RNVC: 2

19 Oct 2012

5340-20-006-4413
Multiple Angle Bracket

200064413
100401-0400-053: RNCC: 3 | RNVC: 2
WSH1043334: RNCC: 5 | RNVC: 9

2 Aug 2011

5340-20-002-9892
Cable Bracket

200029892
10658675-011: RNCC: 3 | RNVC: 2

23 Oct 2006

5340-20-006-0931
Bow Handle

200060931
0656-035383-12: RNCC: 3 | RNVC: 2

4 Feb 2011

5340-21-877-3469
Mortise Lock Set

218773469
C51PDX32D: RNCC: 3 | RNVC: 2

18 Oct 1977

5340-20-004-6047
Mounting Plate

200046047
305108-001: RNCC: 3 | RNVC: 2
305108: RNCC: 5 | RNVC: 1

24 Feb 2009

5340-20-005-0004
Angle Bracket

200050004
10674285-001PW: RNCC: 3 | RNVC: 2
10674285: RNCC: D | RNVC: 9

4 Aug 2009

5340-20-001-7438
Mounting Bracket

200017438
S138-2: RNCC: 3 | RNVC: 2

3 Dec 2004

5340-21-912-3278
Spring Tension Clip

219123278
9276931-1: RNCC: 1 | RNVC: 2
086-100: RNCC: 3 | RNVC: 2

25 Mar 1995

5340-21-108-5077
Strap Hinge

211085077
209: RNCC: 3 | RNVC: 1
209-6: RNCC: 3 | RNVC: 2
1G50900: RNCC: 6 | RNVC: 9
131-8356: RNCC: 6 | RNVC: 9
131-8496: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-001-9660
Plug.

200019660
D2594-1: RNCC: 3 | RNVC: 2

1 Apr 2005

5340-21-908-0468
Lock Assembly

219080468
6345C175-1: RNCC: 3 | RNVC: 2

9 Jan 1991

5340-21-908-5142
Hasp Staple

219085142
WW493030: RNCC: 3 | RNVC: 2

20 Feb 1993

5340-21-876-2126
Rim Clenching Clamp

218762126
09143290: RNCC: 3 | RNVC: 2

13 Sep 1977

5340-20-005-0117
Headless Straight Rod

200050117
43302-A: RNCC: 3 | RNVC: 2

17 Aug 2009

5340-21-311-9584

5340-21-719-2421

5340-21-868-9900
Loop Clamp

218689900
840: RNCC: 3 | RNVC: 2
CLE11-16: RNCC: 5 | RNVC: 2

4 Feb 1975

5340-21-660-1539
Pipe Bracket

216601539
GF9X02-0020002-01: RNCC: 3 | RNVC: 1
9900SK378: RNCC: 3 | RNVC: 2
6191-885-05: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-003-5003
Mounting Bracket

200035003
524-477479-000: RNCC: 3 | RNVC: 2

31 Jul 2007

5340-21-913-0000
Plug

219130000
11-P400Z088/22: RNCC: 3 | RNVC: 2

7 Feb 1996

5340-21-660-1620
Sliding Door Hanger

216601620
345: RNCC: 3 | RNVC: 2
133-6855: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-660-1312
Buckle

216601312
999: RNCC: 3 | RNVC: 1
999-2: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-880-7358
Butt Hinge Leaf

218807358
6-027222-C1: RNCC: 3 | RNVC: 2
219-10023-4: RNCC: 3 | RNVC: 2

11 Sep 1979

5340-21-908-0977
Spring Tension Clip

219080977
991.00.86.0001: RNCC: 3 | RNVC: 2

23 Aug 1991

5340-21-908-0136
Manual Control Handle

219080136
27891: RNCC: 3 | RNVC: 2

13 Sep 1990

5340-20-001-9381
Webbing Strap

200019381
270068-2: RNCC: 3 | RNVC: 2

9 Mar 2005

5340-21-889-8019
Expansion Shield

218898019
9326: RNCC: 3 | RNVC: 2

17 May 1982

5340-21-908-3611
Mounting Plate

219083611
CF814659A: RNCC: 3 | RNVC: 2

18 Dec 1991

5340-21-877-3395
Expansion Plug

218773395
31554: RNCC: 3 | RNVC: 2

18 Oct 1977

5340-21-878-0289
Pipe Bracket

218780289
235 3-4: RNCC: 3 | RNVC: 2
FIG235 3-4: RNCC: 3 | RNVC: 2

24 Jan 1978

5340-20-001-6355
Access Cover

200016355
10658293-011: RNCC: 3 | RNVC: 2

22 Sep 2004

5340-21-859-1474
Loop Clamp

218591474
14-197: RNCC: 3 | RNVC: 1
14-197B: RNCC: 3 | RNVC: 2

13 Aug 1970

5340-20-001-1149
Loop Clamp

200011149
S6222-56: RNCC: 3 | RNVC: 2

6 Nov 2003

5340-21-920-0900
Retainer Front Shoc

219200900
04-37304-3401: RNCC: 3 | RNVC: 2

5 May 1999

5340-20-003-5052
Mounting Plate

200035052
10667175-001: RNCC: 3 | RNVC: 2

1 Aug 2007

5340-21-880-7080
Loop Clamp

218807080
74-302: RNCC: 3 | RNVC: 2

3 Jul 1979

5340-20-006-5210
Mechanical Componen

200065210
1244-0001: RNCC: 3 | RNVC: 2

3 Oct 2011

5340-21-900-1030
Loop Clamp

219001030
U-600: RNCC: 3 | RNVC: 2
U-600: RNCC: 3 | RNVC: 2
32565-3: RNCC: 3 | RNVC: 2

25 Oct 1985

5340-20-003-3818
Access Cover

200033818
03WR086J-LK 4: RNCC: 3 | RNVC: 2

4 Jun 2007

5340-21-908-3524
Rim Clenching Clamp

219083524
10553169: RNCC: 3 | RNVC: 2

13 Dec 1991

5340-20-002-6056
Runner

200026056
3110472-02: RNCC: 3 | RNVC: 2

3 Apr 2006

5340-20-005-7544
Mounting Bracket

200057544
0875347-1: RNCC: 3 | RNVC: 2

3 Aug 2010

5340-21-860-5694
Door Hook And Eye

218605694
0-0: RNCC: 3 | RNVC: 1

15 Oct 1970

5340-21-905-5818
Strap Fastener Loop

219055818
1109-2: RNCC: 3 | RNVC: 2

25 Jan 1990

5340-21-890-4072
Headless Straight Rod

218904072
MS20253P2-2260: RNCC: 2 | RNVC: 2
74B310053-2005: RNCC: 3 | RNVC: 2

22 Aug 1982

5340-20-005-3181
Mounting Plate

200053181
85330366-103: RNCC: 3 | RNVC: 2

17 Feb 2010

5340-21-816-0187
Swivel Caster

218160187
L5996-2: RNCC: 3 | RNVC: 2

9 Aug 1966

5340-21-884-0765
Pipe Bracket

218840765
97C3-4: RNCC: 3 | RNVC: 2

21 Apr 1981

5340-21-890-2418
Dust And Moisture Seal Protective Cap

218902418
TM21-3: RNCC: 3 | RNVC: 2

22 Aug 1982

5340-21-908-4072
Mounting Bracket

219084072
NW3203001-7: RNCC: 3 | RNVC: 2

26 Apr 1992

5340-21-868-9007
Suction Cup

218689007
0-0: RNCC: 3 | RNVC: 1

28 Dec 1973

5340-21-912-6720
Access Cover

219126720
9277984-1: RNCC: 3 | RNVC: 2
LS00863-1: RNCC: 5 | RNVC: 2

3 Aug 1995

5340-21-910-8726
Angle Bracket

219108726
8668309-1: RNCC: 3 | RNVC: 2

1 Jul 1993

5340-20-005-4146
Mounting Plate

200054146
0175870-1: RNCC: 3 | RNVC: 2

29 Mar 2010

5340-21-911-9145
Mechanic Equipment Hardware Kit

219119145
552723-1: RNCC: 3 | RNVC: 2
552723-1: RNCC: 3 | RNVC: 2
543311: RNCC: 5 | RNVC: 2

7 Jul 1994

5340-21-913-8858
Support Bracket Ass

219138858
9277988-1: RNCC: 3 | RNVC: 2

15 Mar 1997

Load More Results