What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

Hardware, Commercial - Canada (CA)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Canada (CA) - NCB is 20 or 21

Page 48 of 64

NSN Format for Hardware, Commercial
Codified by Canada

53	40	21	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Canada (CA)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 190 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 63 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 26 Items
What is a Rod End Connector? 44 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 69 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 226 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 94 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 20 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 582 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 43 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 202 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 65 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Shelf Bracket? 33 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Door Hook And Eye? 22 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 77 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 12 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 23 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 23 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 44 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 13 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is a Friction Catch? 38 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 15 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 39 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 26 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 86 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 20 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 42 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 91 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 57 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 25 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 163 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 101 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 21 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 16 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 288 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 52 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 23 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 131 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 24 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 41 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 70 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 45 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 210 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 163 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 82 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 44 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 38 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 25 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 20 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 42 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 18 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Glazier Point? 10 Items: A Glazier Point (POINT,GLAZIER) is a piece of thin sheet metal, triangular or diamond shaped, designed to hold a pane of glass in a wooden sash.
What is an Angle Bracket? 1105 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 81 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 32 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1130 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 20 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 49 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 37 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Quick Release Plunger? 13 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 114 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flush Catch? 97 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 13 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 86 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 115 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 177 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 24 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 53 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 219 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 40 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 494 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 353 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 55 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 51 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 12 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 601 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 32 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 39 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 34 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 41 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 21 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping? 19 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 93 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 117 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 31 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 45 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 19 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 832 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 35 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 40 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 75 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 106 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Picture Hanger? 10 Items: A Picture Hanger (HANGER,PICTURE) is a hook like device that is secured to walls, bulkheads, columns and the like, by means of a nail, screw, magnet or adhesive backed cloth, that is included with and/or attached to the hook. It is designed to hold and suspend variuos items such as photographs, paintings, maps, documents, etc.
What is a Protection Bellows? 16 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 57 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 49 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 2535 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 19 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 16 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 1222 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 48 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 64 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Threaded Hinged Standoff? 11 Items: A Threaded Hinged Standoff (STANDOFF,HINGED,THREADED) is a standoff, internally and/or externally, threaded on both ends with a hinge or pivot point to allow for independent movement of the ends.
What is a Spacing Threaded Standoff? 178 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 115 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a Crank Handle? 13 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 29 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Mechanic Equipment Hardware Kit? 87 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Dust And Moisture Seal Protective Cover? 38 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 51 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 308 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 41 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 39 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 178 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 27 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 80 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 86 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 48 of 64

5340-20-005-6024
Base

200056024
AC40312-01-05-01: RNCC: 3 | RNVC: 2

19 May 2010

5340-20-005-5752
Manual Control Lever

200055752
IPL19800-05-15: RNCC: 3 | RNVC: 2

14 May 2010

5340-21-890-4842
Rod End Clevis

218904842
86103-371-1131-291: RNCC: 3 | RNVC: 2

7 Nov 1982

5340-21-895-0294
Door Handle

218950294
86917-01-6-275: RNCC: 3 | RNVC: 2

6 Mar 1984

5340-21-908-4749
Manual Control Handle

219084749
TE30003522-006: RNCC: 3 | RNVC: 2

24 Sep 1992

5340-20-008-1310
Access Door Hinge

200081310
10709193-011PEG: RNCC: 3 | RNVC: 2
10709193: RNCC: D | RNVC: 9

25 Nov 2013

5340-20-007-3795
Block Clamp

200073795
ROND 212.7X: RNCC: 3 | RNVC: 2
10707292-001: RNCC: 7 | RNVC: 2
10707292: RNCC: D | RNVC: 9

10 Jan 2013

5340-21-913-0747
Mounting Bracket

219130747
9481353-001: RNCC: 3 | RNVC: 2

15 Mar 1996

5340-21-908-3937
Spring Tension Clip

219083937
086-007: RNCC: 3 | RNVC: 2
75-147-00: RNCC: 5 | RNVC: 2

27 Feb 1992

5340-20-004-2604
Turnbuckle

200042604
P-5812CE: RNCC: 3 | RNVC: 2

26 Aug 2008

5340-20-000-8303
Loop Clamp

200008303
10638605-PG: RNCC: 3 | RNVC: 2
10638605: RNCC: D | RNVC: 9

12 Jun 2003

5340-20-006-7337
Mounting Plate

200067337
10654453-001PEW: RNCC: 3 | RNVC: 2
10654453: RNCC: D | RNVC: 9

13 Feb 2012

5340-21-911-1450
Double Angle Bracket

219111450
A162-63: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-21-908-3971
Electrical-Mechanical Equipment Post

219083971
PS130591-03: RNCC: 3 | RNVC: 2

27 Mar 1992

5340-21-802-0518

5340-21-912-6742
Manual Control Lever

219126742
WW 012 682 DR: RNCC: 3 | RNVC: 2

4 Aug 1995

5340-21-905-5463

5340-21-905-5425

5340-21-905-5392

5340-20-005-7166
Mechanic Equipment Hardware Kit

200057166
1SI0183-20: RNCC: 3 | RNVC: 2

7 Jul 2010

5340-21-868-9056
Door Closer Valve

218689056
21-40: RNCC: 3 | RNVC: 2
5340-5134: RNCC: 6 | RNVC: 9

31 Dec 1973

5340-20-006-3560
Mounting Bracket

200063560
10697724-011: RNCC: 3 | RNVC: 2

16 Jun 2011

5340-20-005-9928
Bumper

200059928
82520478-007: RNCC: 3 | RNVC: 2

14 Dec 2010

5340-21-905-5882
Lock Assembly

219055882
TE20002721-200: RNCC: 3 | RNVC: 2

21 Feb 1990

5340-21-912-1015

5340-21-001-4772
Corrosion Preventive Anode

210014772
8514151PC8515843: RNCC: 3 | RNVC: 2
A8514151PC8515843: RNCC: 3 | RNVC: 2
93497-45: RNCC: 3 | RNVC: 2
93497PC45: RNCC: 3 | RNVC: 2
H99015-45: RNCC: 5 | RNVC: 2

6 Jun 1968

5340-21-868-9086
Door Closer

218689086
DCRS534: RNCC: 3 | RNVC: 1
5340-5157: RNCC: 6 | RNVC: 9

31 Dec 1973

5340-20-002-2442
Open Latch Assembly

200022442
TE20002003-110: RNCC: 3 | RNVC: 2

7 Sep 2005

5340-21-862-6157
Expansion Shield

218626157
251-07872: RNCC: 3 | RNVC: 2
251-2620: RNCC: 3 | RNVC: 2
2620: RNCC: 3 | RNVC: 2
5340-5021: RNCC: 6 | RNVC: 9

19 Aug 1971

5340-21-111-3500

5340-21-877-3728
Door Holder

218773728
03864: RNCC: 3 | RNVC: 1
03864C3: RNCC: 3 | RNVC: 2

1 Nov 1977

5340-21-862-6389
Expansion Shield

218626389
8025-00200: RNCC: 3 | RNVC: 2
8025-2: RNCC: 3 | RNVC: 2
EX-8025-2: RNCC: 5 | RNVC: 2

16 Sep 1971

5340-20-001-0248
Angle Bracket

200010248
10657524-001PEW: RNCC: 3 | RNVC: 2

10 Sep 2003

5340-20-007-7564
Mounting Bracket

200077564
10684382-001PEG: RNCC: 3 | RNVC: 2
10684382: RNCC: 5 | RNVC: 2

8 Jul 2013

5340-21-905-5583
Electrical-Mechanical Equipment Post

219055583
53/3233: RNCC: 3 | RNVC: 2

30 May 1989

5340-20-003-2169
Reinforcement Shiel

200032169
B30501-013-1: RNCC: 3 | RNVC: 2
B30501-013-1: RNCC: 5 | RNVC: 1

19 Feb 2007

5340-21-905-5965
Mounting Bracket

219055965
704-184400-905-0: RNCC: 3 | RNVC: 2

28 Apr 1990

5340-21-845-8080
Dirt And Liquid Deflector

218458080
720-007-1: RNCC: 3 | RNVC: 2

23 Aug 1967

5340-21-806-8420
Rim Clenching Clamp

218068420
DV6216-1B0: RNCC: 3 | RNVC: 2

5 Sep 1963

5340-21-811-5730

5340-21-865-9866

5340-21-901-8608
Pipe Bracket

219018608
H4012A-100: RNCC: 3 | RNVC: 2

1 Apr 1987

5340-20-007-0693
General Purpose Access Door

200070693
1176830: RNCC: 1 | RNVC: 2
04753: RNCC: 3 | RNVC: 2
2037-173: RNCC: 3 | RNVC: 2

13 Aug 2012

5340-20-004-3909
Mounting Bracket

200043909
10674453-011PG: RNCC: 3 | RNVC: 2
10674453: RNCC: 5 | RNVC: 1

10 Nov 2008

5340-20-005-8012
Weldment. Rifle Rel

200058012
B30801-052-1: RNCC: 3 | RNVC: 2

17 Aug 2010

5340-21-840-9125
Tee Hinge

218409125
69GP1: RNCC: 2 | RNVC: 1
609C2G-10: RNCC: 3 | RNVC: 2
609C2G-10: RNCC: 3 | RNVC: 2
609: RNCC: 5 | RNVC: 1

6 Jun 1968

5340-21-920-4673
Strap Assembly

219204673
914114-001: RNCC: 3 | RNVC: 2
1616: RNCC: 5 | RNVC: 2

31 Dec 1999

5340-21-868-8446
Butt Hinge

218688446
F184C4: RNCC: 3 | RNVC: 1
69GP1TYPEB112: RNCC: 4 | RNVC: 1
5340-5079: RNCC: 6 | RNVC: 9

17 May 1973

5340-20-006-6212
Antipilferage Seal

200066212
381498FIG10CA/03: RNCC: 3 | RNVC: 2

6 Dec 2011

5340-20-007-1384
Angle Bracket

200071384
4270005-1: RNCC: 3 | RNVC: 2

13 Sep 2012

5340-21-660-1673
Expansion Shield

216601673
1845-3: RNCC: 3 | RNVC: 2
1845-3: RNCC: 3 | RNVC: 2
1845: RNCC: 3 | RNVC: 2
1845-00300: RNCC: 3 | RNVC: 2
1845: RNCC: 3 | RNVC: 2
1845-00300: RNCC: 3 | RNVC: 2
1845: RNCC: 3 | RNVC: 2
115-0090: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-002-2663
Clamp Assembly

200022663
534-2347-001: RNCC: 3 | RNVC: 2

20 Sep 2005

5340-20-005-2911
Bow Handle

200052911
0656-040610-10: RNCC: 3 | RNVC: 2

3 Feb 2010

5340-21-877-3163
Plug Button

218773163
SS-48174: RNCC: 3 | RNVC: 2
B1556PS: RNCC: 3 | RNVC: 2
31534-1: RNCC: 5 | RNVC: 2

11 Oct 1977

5340-21-807-5790
Loop Clamp

218075790
30111-112: RNCC: 3 | RNVC: 2

5 Sep 1963

5340-21-866-9182

5340-21-876-2167

5340-20-005-3216
Mounting Bracket

200053216
85510057-101: RNCC: 3 | RNVC: 2

18 Feb 2010

5340-20-001-7531
Mounting Bracket

200017531
10658547-011PEW: RNCC: 3 | RNVC: 2

7 Dec 2004

5340-20-005-9926
Arm Assy-Bin Suppor

200059926
82520086-013: RNCC: 3 | RNVC: 2

14 Dec 2010

5340-21-878-0287
Butt Hinge

218780287
5100: RNCC: 3 | RNVC: 2

24 Jan 1978

5340-21-908-0436
Flush Catch

219080436
206-031-546-003: RNCC: 3 | RNVC: 2

17 Aug 1993

5340-21-809-4103

5340-21-810-1730

5340-20-005-9809
Plate

200059809
82520341-103: RNCC: 3 | RNVC: 2

13 Dec 2010

5340-20-003-1721
Mounting Bracket

200031721
10665375-011PG: RNCC: 3 | RNVC: 2
10665375-011: RNCC: 5 | RNVC: 1

22 Jan 2007

5340-20-004-6052
Cushioning Pad

200046052
305612-001: RNCC: 3 | RNVC: 2
305612: RNCC: 5 | RNVC: 1

24 Feb 2009

5340-21-846-9439

5340-21-112-7617

5340-20-000-0508
Latch Assembly.

200000508
0069330-1: RNCC: 3 | RNVC: 2
0069330-1: RNCC: 5 | RNVC: 2
0069330: RNCC: D | RNVC: 9

17 Apr 2002

5340-21-908-0951
Butt Hinge Leaf

219080951
49328103: RNCC: 3 | RNVC: 2

28 Aug 1991

5340-21-874-8471
Webbing Strap

218748471
8409: RNCC: 3 | RNVC: 2

25 Aug 1976

5340-21-914-5359
Angle Bracket

219145359
10628057-PG: RNCC: 3 | RNVC: 2

17 Oct 1998

5340-20-000-8452
Access Cover

200008452
0175151-100: RNCC: 3 | RNVC: 2
0175151: RNCC: D | RNVC: 9

18 Jun 2003

5340-20-005-6782
Butt Hinge

200056782
9480774-1: RNCC: 3 | RNVC: 2
9480774-1: RNCC: 3 | RNVC: 2

11 Jun 2010

5340-21-311-9551
Retaining Band

213119551
J800-28: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-002-3965
Angle Bracket

200023965
10655975-011: RNCC: 3 | RNVC: 2
10655975: RNCC: D | RNVC: 9

13 Dec 2005

5340-20-000-7432
Access Cover

200007432
715397-002: RNCC: 3 | RNVC: 2

30 Apr 2003

5340-20-006-4422
Loop Clamp

200064422
100401-0546-ASY: RNCC: 3 | RNVC: 2
WSH1029085: RNCC: 5 | RNVC: 9

2 Aug 2011

5340-21-884-0401
Antipilferage Seal

218840401
PRONGLOK4: RNCC: 3 | RNVC: 1
PR1035: RNCC: 5 | RNVC: 1

6 Jan 1981

5340-20-006-8423
Mounting Bracket

200068423
10552526-21: RNCC: 3 | RNVC: 2
10552526: RNCC: D | RNVC: 9

12 Apr 2012

5340-21-878-0875
Expansion Shield

218780875
2410-32590: RNCC: 3 | RNVC: 2

21 Mar 1978

5340-21-897-7896
Manual Control Lever

218977896
C83351: RNCC: 3 | RNVC: 2
E42166ITEM581: RNCC: 3 | RNVC: 2

3 Jan 1985

5340-21-914-5313
Angle Bracket

219145313
10627832-PW: RNCC: 3 | RNVC: 2

24 Oct 1998

5340-21-874-3825
Access Door Hinge

218743825
401850: RNCC: 3 | RNVC: 2

22 Mar 1977

5340-21-913-8791
Angle Bracket

219138791
9575952-1: RNCC: 3 | RNVC: 2

9 Apr 1997

5340-21-920-1555
Br Bracket Support

219201555
9376321-1: RNCC: 3 | RNVC: 2

31 May 1999

5340-21-908-0810
Bow Handle

219080810
8961359-1: RNCC: 3 | RNVC: 2

30 May 1991

5340-21-311-9420
Retaining Strap

213119420
J861-18ALUMINUM: RNCC: 3 | RNVC: 2
A14M2-18: RNCC: 3 | RNVC: 2
A14M2-18: RNCC: 3 | RNVC: 2
A14M2-18: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-912-9970
Plug Button

219129970
9014120: RNCC: 3 | RNVC: 2

7 Feb 1996

5340-21-908-0654
Nonmetallic Bumper

219080654
CF819229A: RNCC: 3 | RNVC: 2

13 Mar 1991

5340-21-842-6777
Expansion Shield

218426777
S12: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-005-9126
Mounting Bracket

200059126
10617740: RNCC: 3 | RNVC: 2

10 Nov 2010

5340-21-896-2347
Loop Clamp

218962347
CLAMP1-5/16IN: RNCC: 3 | RNVC: 2

1 Jul 1984

5340-21-913-8900
Angle Bracket

219138900
VD-96-00084-1: RNCC: 3 | RNVC: 2

16 Apr 1997

5340-21-896-2701
Threaded End Tensioning Tie Rod

218962701
7868-032B: RNCC: 3 | RNVC: 2

12 Aug 1984

5340-21-895-0448
Rubber Conical Plug

218950448
4: RNCC: 3 | RNVC: 2

20 Feb 1984

5340-20-002-5652
Roller Shaft

200025652
7402-057-1: RNCC: 3 | RNVC: 2

15 Mar 2006

5340-20-001-0067
Angle Bracket

200010067
10657322-011PEG: RNCC: 3 | RNVC: 2

5 Sep 2003

5340-20-007-8520
Mounting Plate

200078520
10707757-011PEG: RNCC: 3 | RNVC: 2
10707757: RNCC: D | RNVC: 9

26 Aug 2013

5340-20-007-9553
Mounting Bracket

200079553
10696365-011PEG: RNCC: 3 | RNVC: 2
10696365: RNCC: D | RNVC: 9

27 Sep 2013

5340-20-006-5448
Mechanic Equipment Hardware Kit

200065448
AC15192-90: RNCC: 3 | RNVC: 2

14 Oct 2011

5340-20-005-5642
Mending Plate

200055642
AC40313-01-01: RNCC: 3 | RNVC: 2

13 May 2010

5340-21-868-9053
Flush Bolt

218689053
5860: RNCC: 3 | RNVC: 1
5340-5177: RNCC: 6 | RNVC: 9

31 Dec 1973

5340-21-911-1312
Coat And Hat Hook

219111312
2420-32: RNCC: 3 | RNVC: 2

26 Nov 1993

5340-20-006-6577
General Purpose Resilient Mount

200066577
BR4-LS-2800: RNCC: 3 | RNVC: 2
SML000641: RNCC: 5 | RNVC: 2
BR4-LS 2800: RNCC: 5 | RNVC: 2

5 Jan 2012

5340-20-007-1051
Mounting Bracket

200071051
361725-001: RNCC: 3 | RNVC: 2

29 Aug 2012

5340-21-888-1305
Door Knob Spindle

218881305
0-0: RNCC: 3 | RNVC: 1

24 Jan 1982

5340-21-921-5022
End Fitting Assembl

219215022
A539C018-1: RNCC: 3 | RNVC: 2

13 Dec 2001

5340-21-905-5124
Angle Bracket

219055124
8476883-1: RNCC: 3 | RNVC: 2

5 Aug 1988

5340-20-007-8516
Mounting Plate

200078516
10707871-011PEG: RNCC: 3 | RNVC: 2
10707871: RNCC: D | RNVC: 9

26 Aug 2013

5340-21-891-6547
Electrical-Mechanical Equipment Post

218916547
46-54406-38: RNCC: 3 | RNVC: 2

29 May 1983

5340-20-007-1270
Vent Plug

200071270
3112993-01: RNCC: 3 | RNVC: 2

7 Sep 2012

5340-21-895-0193
Rim Clenching Clamp

218950193
16840-08-5-231: RNCC: 3 | RNVC: 2
106064-525: RNCC: 5 | RNVC: 2

6 Mar 1984

5340-21-814-1805
Loop Clamp

218141805
459642-96: RNCC: 3 | RNVC: 2

13 Jun 1964

5340-21-910-8713
Mounting Plate

219108713
FP180960-11: RNCC: 3 | RNVC: 2

23 Jun 1993

5340-21-896-2764

5340-21-868-8561
Webbing Strap

218688561
89C41838-35: RNCC: 3 | RNVC: 2
89C41838-5: RNCC: 3 | RNVC: 2
89C41838-55: RNCC: 3 | RNVC: 2

16 Aug 1973

5340-21-891-5603
Spring

218915603
54-28RH: RNCC: 3 | RNVC: 2

22 Jan 1983

5340-20-000-2976
Webbing Strap

200002976
0176408-002: RNCC: 1 | RNVC: 2
HS-40: RNCC: 3 | RNVC: 2

23 Jul 2002

5340-21-865-9995
Expansion Shield

218659995
0512-14000: RNCC: 3 | RNVC: 2
0512-14000: RNCC: 3 | RNVC: 2
512-14: RNCC: 3 | RNVC: 2
512-14: RNCC: 3 | RNVC: 2

19 May 1972

5340-21-886-2434
Electrical-Mechanical Equipment Post

218862434
530-352387-000: RNCC: 3 | RNVC: 2
PL352-387: RNCC: 5 | RNVC: 2

28 Jul 1981

5340-21-914-8588
Mounting Plate

219148588
258369-001: RNCC: 3 | RNVC: 2

28 Jul 1998

5340-21-908-3322
Access Door

219083322
8914833-3: RNCC: 3 | RNVC: 2

1 Oct 1991

5340-21-807-5776
Multiple Angle Bracket

218075776
178-110: RNCC: 3 | RNVC: 2

5 Feb 1964

5340-20-006-6877
Access Cover

200066877
0677862-1: RNCC: 3 | RNVC: 2
0677862-1: RNCC: 5 | RNVC: 2

25 Jan 2012

5340-21-846-9872
Rim Clenching Clamp

218469872
10008-3: RNCC: 3 | RNVC: 2

16 Aug 1967

5340-20-006-0991
Mounting Plate

200060991
82510088-103: RNCC: 3 | RNVC: 2

8 Feb 2011

5340-21-660-1925
Turnbuckle

216601925
303: RNCC: 3 | RNVC: 1
303X3/4-9: RNCC: 3 | RNVC: 2
185-6824: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-819-8691
Spring Tension Clip

218198691
10CSC109: RNCC: 3 | RNVC: 2

1 Mar 1965

5340-20-005-1225
Corner Brace

200051225
B30603-222-1: RNCC: 3 | RNVC: 2

22 Oct 2009

5340-21-908-5014
Mounting Bracket

219085014
C6FF1126-29: RNCC: 3 | RNVC: 2

13 Jan 1993

5340-20-007-8892
Mounting Plate

200078892
10705724-001PEB: RNCC: 3 | RNVC: 2
10705724: RNCC: D | RNVC: 9

10 Sep 2013

5340-21-893-7841
Latch

218937841
447: RNCC: 3 | RNVC: 2

16 Jul 1983

5340-21-891-6593
Clamp

218916593
M4628-50: RNCC: 3 | RNVC: 2

21 May 1983

5340-21-889-8274

5340-21-863-3495
Handrail Bracket

218633495
T0170: RNCC: 3 | RNVC: 2
T0170C4: RNCC: 3 | RNVC: 2
9061: RNCC: 3 | RNVC: 2
130-3759: RNCC: 6 | RNVC: 9

18 Nov 1971

5340-21-817-5471

5340-20-005-6581
Mounting Bracket

200056581
47397-B: RNCC: 3 | RNVC: 2

4 Jun 2010

5340-20-006-1217
Angle Bracket

200061217
446-83062-1: RNCC: 3 | RNVC: 2

15 Feb 2011

5340-21-913-2899
Steerin Cover Plate

219132899
10555101-PW: RNCC: 3 | RNVC: 2

1 Sep 1996

5340-21-913-3163
Mounting Bracket

219133163
10556805: RNCC: 3 | RNVC: 2

30 Aug 1996

5340-20-008-6457

5340-20-010-4181

5340-20-002-9083
Bracket Weldment

200029083
C51000-167-1: RNCC: 3 | RNVC: 2

1 Sep 2006

5340-20-006-5408
Mounting Bracket

200065408
AC19672-90: RNCC: 3 | RNVC: 2

13 Oct 2011

5340-21-905-5048
Electrical-Mechanical Equipment Post

1 Jun 1988

5340-21-818-3411

5340-21-818-5210

5340-21-818-5218

5340-21-660-0911
Barrel Bolt

216600911
408: RNCC: 3 | RNVC: 1
SC1084-8: RNCC: 3 | RNVC: 2
SC1084C26-8: RNCC: 3 | RNVC: 2
130-2508: RNCC: 6 | RNVC: 9
130-2758: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-005-9212
Manual Control Handle

200059212
S136-10-013: RNCC: 3 | RNVC: 2

19 Nov 2010

5340-20-004-1381
Dust And Moisture Seal Protective Cap

200041381
10638406-1: RNCC: 3 | RNVC: 2
317-045: RNCC: 5 | RNVC: 1

26 May 2008

5340-21-876-2231
Bracket

218762231
463892C1: RNCC: 3 | RNVC: 2

27 Sep 1977

5340-20-000-0917
Butt Hinge

200000917
HSLN60-120-179D6: RNCC: 3 | RNVC: 2

1 May 2002

5340-21-874-3816
Expansion Plug

218743816
BP209L: RNCC: 3 | RNVC: 2

22 Mar 1977

5340-20-001-1439
Angle Bracket

200011439
3111827-01: RNCC: 3 | RNVC: 2

26 Nov 2003

5340-21-897-8682
Upper Transfer Bar

218978682
K510-123: RNCC: 3 | RNVC: 2

15 Feb 1985

5340-21-914-8235
Mounting Plate

219148235
1205-1031-11: RNCC: 3 | RNVC: 2

28 Jul 1998

5340-21-920-0388
Mounting Bracket

219200388
10607327-02: RNCC: 3 | RNVC: 2

19 Mar 1999

5340-21-846-1542
Key Blank

218461542
H98LA: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-007-5498
Access Cover

200075498
0678396-1: RNCC: 3 | RNVC: 2

26 Mar 2013

5340-21-814-0099
Resilient Mount

218140099
J8187-1: RNCC: 3 | RNVC: 2
28-61128-2: RNCC: 5 | RNVC: 2

26 Jun 1964

5340-21-905-5269
Angle Bracket

219055269
8281256-2: RNCC: 3 | RNVC: 2
KC6626: RNCC: 5 | RNVC: 9

5 Nov 1988

5340-20-006-1412
Butt Hinge

200061412
DSC266-2: RNCC: 3 | RNVC: 2

2 Mar 2011

5340-21-886-2204
Furniture Glide

218862204
9-7-8IN: RNCC: 3 | RNVC: 2

7 Jul 1981

5340-21-844-5460
Hinge Pin

218445460
C5W126188-1: RNCC: 3 | RNVC: 2

25 Oct 1966

5340-21-891-6127
Screw Thread Insert

218916127
1084-6CN9.0: RNCC: 3 | RNVC: 2
R1084-6: RNCC: 5 | RNVC: 2

15 Mar 1983

5340-20-007-8887
Dust And Moisture Seal Protective Cover

200078887
1301608: RNCC: 3 | RNVC: 2

10 Sep 2013

5340-21-908-4382
Access Door

219084382
2350817: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-21-911-1502
Nonmetallic Bumper

219111502
SJ-5003 021200 184284: RNCC: 3 | RNVC: 2

10 Mar 1994

5340-21-866-9718
Loop Clamp

218669718
CLE5-16: RNCC: 3 | RNVC: 2
CLE5-16: RNCC: 3 | RNVC: 2

18 Aug 1972

5340-21-896-0679
Elastic Strap

218960679
54920: RNCC: 3 | RNVC: 2
9450-0100: RNCC: 5 | RNVC: 2
16919004100: RNCC: 5 | RNVC: 2
20007: RNCC: 5 | RNVC: 9

1 Apr 1984

5340-20-005-3040
Mounting Plate

200053040
10669649-001PEG: RNCC: 3 | RNVC: 2

15 Feb 2010

5340-21-911-1426
Mounting Plate

219111426
CA0 10 052: RNCC: 3 | RNVC: 2

12 Jan 1994

5340-20-003-7310
Casement Fastener

200037310
H-3553: RNCC: 3 | RNVC: 2

14 Nov 2007

5340-20-006-0830
Loop Clamp

200060830
24763: RNCC: 3 | RNVC: 2

31 Jan 2011

5340-21-908-4463
Headless Grooved Rod

219084463
308-25-7514: RNCC: 3 | RNVC: 2

11 Jul 1992

5340-20-007-9557
Rim Lock

200079557
10698206-011PG: RNCC: 3 | RNVC: 2
10698206: RNCC: D | RNVC: 9

27 Sep 2013

5340-20-007-8421
Mounting Plate

200078421
10705328-001PEG: RNCC: 3 | RNVC: 2
10705328: RNCC: D | RNVC: 9

22 Aug 2013

5340-21-912-3239
Mounting Bracket

219123239
8827881-2: RNCC: 3 | RNVC: 2

15 Mar 1995

5340-20-005-3444
Lever Bracket

200053444
82740149-003: RNCC: 3 | RNVC: 2

22 Feb 2010

5340-21-108-5071
Butt Hinge

211085071
1431: RNCC: 3 | RNVC: 1
1431-1 1/4: RNCC: 3 | RNVC: 2
1G49650: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-866-4342
Pipe Bracket

218664342
24M-1.000: RNCC: 3 | RNVC: 2
CT-65-1.000: RNCC: 3 | RNVC: 2

19 May 1972

5340-21-914-9913
Angle Bracket

219149913
10558534: RNCC: 3 | RNVC: 2

6 Mar 1999

5340-20-007-3571
Retaining Strap

200073571
810: RNCC: 3 | RNVC: 2

30 Dec 2012

5340-20-002-7098
Armrest Link

200027098
10493-7: RNCC: 3 | RNVC: 2

23 May 2006

5340-21-814-0480
Resilient Mount

218140480
NL68841-1: RNCC: 3 | RNVC: 2

19 Apr 1967

5340-21-911-9540
Access Door

219119540
9279828-1: RNCC: 3 | RNVC: 2

29 Sep 1994

5340-21-870-9518
Webbing Strap

218709518
7254: RNCC: 3 | RNVC: 2

3 Mar 1976

5340-20-001-2353
Strap Hinge Leaf

200012353
GS325-0039-4: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-21-901-8077
Butt Hinge

219018077
MS20001-8-7200: RNCC: 2 | RNVC: 2
MS20001-8-7200: RNCC: 5 | RNVC: 1

29 May 1986

5340-21-908-5150
T Bracket

219085150
CS51110: RNCC: 3 | RNVC: 2
VNS0035: RNCC: 5 | RNVC: 2

13 Feb 1993

200038602
9776251-1: RNCC: 3 | RNVC: 2
TC-371 MODIFIED: RNCC: 5 | RNVC: 1

22 Jan 2008

5340-20-007-6699
Mounting Bracket

200076699
10705153-011PW: RNCC: 3 | RNVC: 2
10705153: RNCC: D | RNVC: 9

27 May 2013

5340-21-859-2500
Door Closer

218592500
72: RNCC: 3 | RNVC: 1

16 Jul 1970

5340-21-860-8681
Strap Hinge

218608681
900RBP: RNCC: 3 | RNVC: 2

15 Apr 1971

5340-21-908-3941
Vent Plug

219083941
CF 826 076 AR: RNCC: 3 | RNVC: 2
59.61.071.A: RNCC: 5 | RNVC: 2

28 Feb 1992

5340-20-006-9916
Mounting Plate

200069916
10681493-001PG: RNCC: 3 | RNVC: 2
10681493: RNCC: D | RNVC: 9

3 Jul 2012

5340-20-007-6030
Mounting Bracket

200076030
10702873-011PW: RNCC: 3 | RNVC: 2
10702873: RNCC: D | RNVC: 9

23 Apr 2013

5340-20-006-4899
Access Cover

200064899
10680027-011PEW: RNCC: 3 | RNVC: 2

6 Sep 2011

5340-21-920-6552
Blank Panel

219206552
302065-001: RNCC: 3 | RNVC: 2
302065-001: RNCC: 5 | RNVC: 2

12 May 2000

5340-21-862-6229
Key Blank

218626229
00A: RNCC: 3 | RNVC: 2

16 Sep 1971

5340-21-898-4116
Clamping Catch

218984116
353 7144-801: RNCC: 3 | RNVC: 2

15 Mar 1985

5340-21-898-4108

5340-20-004-5902
Mounting Plate

200045902
300179-701: RNCC: 3 | RNVC: 2
300179: RNCC: 5 | RNVC: 1

19 Feb 2009

5340-20-005-3264
Bumper

200053264
85520271-003: RNCC: 3 | RNVC: 2

18 Feb 2010

5340-21-908-0933
Retaining Strap

219080933
8961002-01: RNCC: 3 | RNVC: 2
8961002-01: RNCC: 5 | RNVC: 2

14 Aug 1991

5340-21-865-1750
Mounting Bracket

218651750
9-035-50: RNCC: 3 | RNVC: 2
D8900: RNCC: 5 | RNVC: 2

17 Feb 1972

5340-21-860-7136
Mortise Lock Set

218607136
463-5651-C10: RNCC: 3 | RNVC: 2

17 Dec 1970

5340-21-001-7396
Handwheel

210017396
M229E: RNCC: 3 | RNVC: 2

30 Nov 1965

5340-20-006-0801
Mounting Bracket

200060801
0656-035713-12: RNCC: 3 | RNVC: 2

27 Jan 2011

5340-20-005-9480
Mounting Bracket

200059480
82520323-007: RNCC: 3 | RNVC: 2

30 Nov 2010

5340-21-660-1347
Swivel Caster

216601347
40-A-4: RNCC: 3 | RNVC: 2
40A4: RNCC: 3 | RNVC: 2
40-A-4: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-911-9133
Corrosion Preventive Anode

219119133
ELECTRO-GUARD V-661: RNCC: 3 | RNVC: 2
120-2106-001: RNCC: 5 | RNVC: 2

21 Jun 1994

5340-21-660-0149
Butt Hinge

216600149
800: RNCC: 3 | RNVC: 1
838: RNCC: 3 | RNVC: 1
838-2: RNCC: 3 | RNVC: 1
838 2 X 1 9/16: RNCC: 3 | RNVC: 2
69GP1: RNCC: 4 | RNVC: 1
1G50000: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-311-9549
Retaining Band

213119549
J800-24: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-887-8203
Butt Hinge Leaf

218878203
9M366Y6-1790: RNCC: 3 | RNVC: 2

2 Dec 1981

5340-20-007-1289
Seal Retaining Plate

200071289
85230166-109: RNCC: 3 | RNVC: 2

10 Sep 2012

5340-20-007-7357
Mounting Bracket

200077357
10712185-001PEW: RNCC: 3 | RNVC: 2
10712185: RNCC: D | RNVC: 9

27 Jun 2013

5340-21-896-2478
Hood Catch Metal

218962478
183823695: RNCC: 3 | RNVC: 2
B183823695: RNCC: 5 | RNVC: 2

29 Jul 1984

5340-21-860-6498
Turnbuckle

218606498
50-14: RNCC: 3 | RNVC: 2

12 Nov 1970

5340-21-890-4941
Spring Tension Clip

218904941
76-6056: RNCC: 3 | RNVC: 2

14 Nov 1982

5340-21-897-8540
Angle Bracket

218978540
11647420: RNCC: 3 | RNVC: 2

31 Jan 1985

5340-21-877-3267
Loop Clamp

218773267
32604: RNCC: 3 | RNVC: 2

18 Oct 1977

5340-21-805-4323
Loop Clamp

218054323
BK14496: RNCC: 3 | RNVC: 2

27 Aug 1969

5340-21-908-4861
Mounting Plate

219084861
459 853: RNCC: 3 | RNVC: 2

29 Oct 1992

5340-21-878-0877
Elastic Strap

218780877
2044: RNCC: 3 | RNVC: 2

5 Apr 1978

5340-21-893-8461
Dust And Moisture Seal Protective Plug

218938461
CN190545: RNCC: 3 | RNVC: 2

15 Oct 1983

5340-20-004-0079
Corrosion Preventive Anode

200040079
852835: RNCC: 3 | RNVC: 2

3 Apr 2008

5340-21-857-9900
Thumb Latch

218579900
222: RNCC: 3 | RNVC: 2

16 Apr 1970

5340-20-004-3770
Loop Clamp

200043770
703-024: RNCC: 3 | RNVC: 2

28 Oct 2008

5340-21-914-1569
Mounting Plate

219141569
10555883-PW: RNCC: 3 | RNVC: 2

15 May 1997

5340-21-914-6143
Access Cover

219146143
10558389: RNCC: 3 | RNVC: 2

11 Jun 1998

5340-21-911-8858
Metal Grille

219118858
9278948-1: RNCC: 3 | RNVC: 2

18 May 1994

5340-20-005-9324
Access Cover

200059324
1025151-1: RNCC: 3 | RNVC: 2

23 Nov 2010

5340-20-005-2380
Loop Clamp

200052380
201156200011: RNCC: 3 | RNVC: 2

5 Jan 2010

5340-21-912-5857
Mounting Plate

219125857
457-595-0: RNCC: 3 | RNVC: 2

18 Jul 1995

5340-21-913-3403
Access Cover

219133403
10558267: RNCC: 3 | RNVC: 2

28 Jan 1997

5340-21-913-3007
Quick Release Plunger

219133007
10558718: RNCC: 3 | RNVC: 2

1 Nov 1996

5340-21-913-6532
Access Cover

219136532
10500299-PT: RNCC: 3 | RNVC: 2

6 Mar 1997

5340-21-913-8883
Access Cover

219138883
10557301: RNCC: 3 | RNVC: 2

15 Apr 1997

5340-21-913-8891
Mounting Plate

219138891
10553559-PW: RNCC: 3 | RNVC: 2

28 Mar 1997

5340-20-006-1219
Angle Bracket

200061219
446-83044-1: RNCC: 3 | RNVC: 2

15 Feb 2011

5340-21-921-5545
Mounting Bracket

219215545
10625490: RNCC: 3 | RNVC: 2

15 Jan 2002

5340-21-921-7354
Mounting Bracket

219217354
10626198-PW: RNCC: 3 | RNVC: 2

4 Mar 2002

5340-21-921-5735
Mounting Bracket

219215735
10639737-PW: RNCC: 3 | RNVC: 2

18 Jan 2002

5340-21-913-2945
Clamping Catch

219132945
096-806: RNCC: 3 | RNVC: 2

19 Sep 1996

5340-21-913-2995
Butt Hinge

219132995
10607655-2: RNCC: 3 | RNVC: 2

18 Oct 1996

5340-20-011-4433

5340-21-911-9687
Electrical-Mechanical Equipment Post

219119687
HMF-2529-SS-19: RNCC: 3 | RNVC: 2

1 Dec 1994

5340-20-002-9673
Access Cover

200029673
10608403: RNCC: 3 | RNVC: 2

3 Oct 2006

5340-21-862-4776
Webbing Strap

218624776
89C43373-3: RNCC: 3 | RNVC: 2

13 Jan 1972

5340-21-660-1193
Screw Hook

216601193
025-102: RNCC: 3 | RNVC: 2
1414: RNCC: 3 | RNVC: 2
5754: RNCC: 3 | RNVC: 2
131-8960: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-855-1381
General Purpose Resilient Mount

218551381
GF9E02-0020173-02: RNCC: 3 | RNVC: 1
GF9E02-0020173-01: RNCC: 3 | RNVC: 1
GF9E02-0020173-02 ITEM 9: RNCC: 3 | RNVC: 2
8558505-4: RNCC: 3 | RNVC: 2
GF9E02-0020173-01 ITEM 9: RNCC: 3 | RNVC: 2
9900SHB383: RNCC: 5 | RNVC: 2

23 Jul 1969

5340-21-920-0430
Dust And Moisture Seal Protective Cap

219200430
10616770-1: RNCC: 3 | RNVC: 2

24 Mar 1999

5340-21-880-7864
Detent Plunger

218807864
125776-1: RNCC: 3 | RNVC: 2

12 Mar 1980

5340-21-895-0377
Grooved Clamp Coupling

218950377
052627: RNCC: 3 | RNVC: 2
52627: RNCC: 5 | RNVC: 2

4 Feb 1984

5340-21-106-6978
Webbing Strap

211066978
3000353: RNCC: 3 | RNVC: 2
3001496: RNCC: 5 | RNVC: 1

6 Jun 1968

5340-20-007-7815
Mortise Latch Set

200077815
HWLS5312L/R: RNCC: 3 | RNVC: 2

19 Jul 2013

5340-21-660-0553
Hinged Hasp

216600553
815C4-4 1/2: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-914-2153
Block Fairlead

219142153
9627013: RNCC: 3 | RNVC: 2
9627013-1: RNCC: 3 | RNVC: 2

12 Jul 1997

5340-20-007-6391
Mounting Bracket

200076391
10689784-001PEG: RNCC: 3 | RNVC: 2
10689784: RNCC: D | RNVC: 9

9 May 2013

5340-21-868-9059
Door Closer Seal

218689059
303597: RNCC: 3 | RNVC: 2
5340-5143: RNCC: 6 | RNVC: 9

31 Dec 1973

5340-20-005-9418
Angle Bracket

200059418
TE10017669-001: RNCC: 3 | RNVC: 2

26 Nov 2010

5340-20-007-8590
Mounting Bracket

200078590
7007-1087-1: RNCC: 3 | RNVC: 2

28 Aug 2013

5340-21-910-8562
Mounting Plate

219108562
TE10003912-001: RNCC: 3 | RNVC: 2

29 Apr 1993

5340-21-920-1556
Plate Mounting-Mark

219201556
626-800457-000: RNCC: 3 | RNVC: 2

31 May 1999

5340-21-843-6649

5340-21-809-0465

5340-21-859-0136

5340-21-920-0462
Bag Hook

219200462
10616874: RNCC: 3 | RNVC: 2

24 Mar 1999

5340-21-804-9879

5340-21-908-3328

5340-21-908-3382

5340-21-807-0360
Nonmetallic Bumper

218070360
507900-18: RNCC: 3 | RNVC: 2
H4A: RNCC: 5 | RNVC: 2

5 Sep 1963

5340-20-003-2765
Access Cover

200032765
10655944-001: RNCC: 3 | RNVC: 2

21 Mar 2007

5340-21-911-9546
Catch Strike

219119546
9279761-1: RNCC: 3 | RNVC: 2

28 Sep 1994

5340-21-911-1148
Clevis Connector

219111148
9576391-1: RNCC: 3 | RNVC: 2

26 Oct 1993

5340-20-004-1264
Angle Bracket

200041264
541509-2: RNCC: 3 | RNVC: 2

20 May 2008

5340-21-921-2377
Retaining Strap

219212377
0078463-1: RNCC: 3 | RNVC: 2

17 Jul 2001

5340-20-006-9070
Dust And Moisture Seal Protective Cover

200069070
1176968-1: RNCC: 1 | RNVC: 2
05605-1: RNCC: 3 | RNVC: 2

22 May 2012

5340-21-908-0543
Webbing Strap

219080543
8602/3: RNCC: 3 | RNVC: 2
10552806-3: RNCC: 5 | RNVC: 2
10552806-3: RNCC: 5 | RNVC: 2
10552806-3: RNCC: 5 | RNVC: 2

18 Jan 1991

5340-21-819-8680
Latch

218198680
0-0: RNCC: 3 | RNVC: 2

29 Aug 1966

5340-21-901-8609
Pipe Bracket

219018609
H4012A-50: RNCC: 3 | RNVC: 2

9 Apr 1987

5340-21-896-9603
Mortise Latch Set

218969603
4510-RH: RNCC: 3 | RNVC: 2

23 Sep 1984

5340-20-001-7681
Mounting Bracket

200017681
160-275-1: RNCC: 3 | RNVC: 2

15 Dec 2004

5340-20-002-9893
Mounting Plate

200029893
D-100069: RNCC: 3 | RNVC: 2

23 Oct 2006

5340-21-908-0214
Cable Retractor

219080214
3513 172 2177: RNCC: 3 | RNVC: 2

12 Oct 1990

5340-21-859-0143
Spring Tension Clip

218590143
80-2: RNCC: 3 | RNVC: 2

16 Apr 1970

5340-21-857-7470
Magnetic Catch

218577470
E9765: RNCC: 3 | RNVC: 2

15 Jan 1970

5340-21-857-7471
Magnetic Catch

218577471
E9783: RNCC: 3 | RNVC: 2

15 Jan 1970

5340-21-920-0444
Mounting Plate

219200444
10616884-2: RNCC: 3 | RNVC: 2

24 Mar 1999

5340-21-851-1505
Retaining Strap

218511505
1022C: RNCC: 3 | RNVC: 2

2 Aug 1968

5340-21-884-0759
Pipe Bracket

218840759
97C2: RNCC: 3 | RNVC: 2

21 Apr 1981

5340-21-817-0879

5340-21-908-0946
Pad Eye

219080946
407010107073: RNCC: 3 | RNVC: 2

16 Aug 1991

5340-21-860-5329
Electrical-Mechanical Equipment Post

218605329
190-213: RNCC: 3 | RNVC: 2

15 Oct 1970

5340-21-921-3952
Adapter Plate

219213952
86679: RNCC: 3 | RNVC: 2

29 Oct 2001

5340-21-660-1926
Turnbuckle

216601926
304: RNCC: 3 | RNVC: 1
304X5/8-9: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-006-0342
Mounting Bracket

200060342
82520683-101: RNCC: 3 | RNVC: 2

4 Jan 2011

5340-20-003-4826
Mounting Plate

200034826
10668504-011PW: RNCC: 3 | RNVC: 2
10668504: RNCC: 5 | RNVC: 1

25 Jul 2007

5340-21-660-1334
Swivel Caster

216601334
4: RNCC: 3 | RNVC: 2
4: RNCC: 5 | RNVC: 2

6 Jun 1968

5340-20-006-3385
Mechanic Equipment Hardware Kit

200063385
1080223-1: RNCC: 3 | RNVC: 2

8 Jun 2011

5340-21-901-8958
Protection Bellows

219018958
WW403904: RNCC: 3 | RNVC: 2
59.13.009.A: RNCC: 5 | RNVC: 2
59.15.034.A: RNCC: 5 | RNVC: 2

3 Mar 1988

5340-21-108-5019
Hinged Hasp

211085019
815-4 1/2: RNCC: 3 | RNVC: 2
815-4 1/2: RNCC: 3 | RNVC: 2
1G47100: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-006-0989
Mounting Plate

200060989
82510078-107: RNCC: 3 | RNVC: 2

8 Feb 2011

5340-21-860-5995
Conce Cabinet Hinge

218605995
E1238-41: RNCC: 3 | RNVC: 2
69GP8: RNCC: 4 | RNVC: 1

12 Nov 1970

5340-21-898-4685
Expansion Shield

218984685
59255: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-20-008-1322
Mounting Bracket

200081322
10708878-011PEW: RNCC: 3 | RNVC: 2
10708878: RNCC: D | RNVC: 9

25 Nov 2013

5340-20-004-0361
Door Assembly

200040361
9877863-1: RNCC: 3 | RNVC: 2

15 Apr 2008

5340-20-006-1796
Mounting Bracket

200061796
82450050-001: RNCC: 3 | RNVC: 2

17 Mar 2011

5340-20-007-9573
Mounting Bracket

200079573
10682978-011PEG: RNCC: 3 | RNVC: 2
10682978: RNCC: D | RNVC: 9

27 Sep 2013

5340-20-004-3873
Mounting Channel

200043873
541734-1: RNCC: 3 | RNVC: 2

6 Nov 2008

5340-21-901-8356
Webbing Strap

219018356
8512: RNCC: 3 | RNVC: 2
10505112: RNCC: 5 | RNVC: 2

24 Nov 1986

5340-21-865-9823
Sliding Door Track Bracket

218659823
1-31: RNCC: 3 | RNVC: 2

19 May 1972

5340-20-006-8704
Access Cover

200068704
B81002-263-1: RNCC: 3 | RNVC: 2

27 Apr 2012

5340-21-845-2872
Retaining Strap

218452872
516-2766-001: RNCC: 3 | RNVC: 2

17 Jan 1967

5340-20-006-4781
Mounting Plate

200064781
85420035-101: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-21-660-1534
Pipe Bracket

216601534
GF9X02-0020002-01: RNCC: 3 | RNVC: 1
9900SK373: RNCC: 3 | RNVC: 2
6191-885-23: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-896-9934
Key Blank

218969934
E-88: RNCC: 3 | RNVC: 2

19 Nov 1984

5340-20-008-1325
Mounting Bracket

200081325
10708787-011PW: RNCC: 3 | RNVC: 2
10708787: RNCC: D | RNVC: 9

25 Nov 2013

5340-21-800-6664

5340-21-077-0742

5340-21-908-3579
Mounting Bracket

219083579
CF218084C: RNCC: 3 | RNVC: 2

13 Dec 1991

5340-21-895-0053
Nonmetallic Bumper

218950053
A-10587: RNCC: 3 | RNVC: 2

7 Jan 1984

5340-21-817-2015

5340-21-912-9869
Latch Bar

219129869
13114-3: RNCC: 3 | RNVC: 2

24 Jan 1996

5340-21-877-3380
Mortise Lock Set

218773380
NTA2658 1-2: RNCC: 3 | RNVC: 2

31 Oct 1977

5340-21-908-4599
Clamp

219084599
86022-1: RNCC: 3 | RNVC: 2

22 Aug 1992

5340-20-000-2217
Mounting Plate

200002217
9379546-1: RNCC: 3 | RNVC: 2

14 Jun 2002

5340-21-905-5837
Bow Handle

219055837
8928276-1: RNCC: 3 | RNVC: 2

1 Feb 1990

5340-20-000-3692
Mounting Bracket

200003692
10656452-001PEW: RNCC: 3 | RNVC: 2

28 Aug 2002

5340-20-000-3550
Latch Bar

200003550
10656587-011PW: RNCC: 3 | RNVC: 2

21 Aug 2002

5340-20-000-3455
Mounting Bracket

200003455
10656922-011PW: RNCC: 3 | RNVC: 2

20 Aug 2002

5340-20-000-1280
Mounting Bracket

200001280
10651656-011PEW: RNCC: 3 | RNVC: 2

9 May 2002

5340-20-005-7212
Manual Control Handle

200057212
SHOXS-0236: RNCC: 3 | RNVC: 2

9 Jul 2010

5340-20-006-5625
Double Angle Bracket

200065625
0875262-1: RNCC: 3 | RNVC: 2
0875262-1: RNCC: 3 | RNVC: 2

28 Oct 2011

5340-20-007-8888
Mounting Plate

200078888
10705058-001: RNCC: 3 | RNVC: 2
10705058: RNCC: D | RNVC: 9

10 Sep 2013

5340-20-007-4598
Mounting Bracket

200074598
10656929-001: RNCC: 3 | RNVC: 2
10656929: RNCC: D | RNVC: 9

12 Feb 2013

5340-20-003-8492
Webbing Strap

200038492
10144-STRP: RNCC: 3 | RNVC: 2
10443-STRP: RNCC: 5 | RNVC: 2

17 Jan 2008

5340-21-719-3012

5340-21-102-7191

5340-21-660-0898
Barrel Bolt

216600898
406: RNCC: 3 | RNVC: 1
SC1078C4-6: RNCC: 3 | RNVC: 2
SC1078C4-6: RNCC: 3 | RNVC: 2
130-2526: RNCC: 6 | RNVC: 9
130-2766: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-908-0893
Butt Hinge

219080893
10-08780: RNCC: 3 | RNVC: 2
NHSTS1116: RNCC: 5 | RNVC: 1

16 Jul 1991

5340-20-004-8164
Butt Hinge

200048164
0677718-1: RNCC: 3 | RNVC: 2

14 May 2009

Load More Results