What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

Hardware, Commercial - Canada (CA)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Canada (CA) - NCB is 20 or 21

Page 47 of 64

NSN Format for Hardware, Commercial
Codified by Canada

53	40	21	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Canada (CA)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 190 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 63 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 26 Items
What is a Rod End Connector? 44 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 69 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 226 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 94 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 20 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 582 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 43 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 202 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 65 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Shelf Bracket? 33 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Door Hook And Eye? 22 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 77 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 12 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 23 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 23 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 44 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 13 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is a Friction Catch? 38 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 15 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 39 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 26 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 86 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 20 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 42 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 91 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 57 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 25 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 163 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 101 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 21 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 16 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 288 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 52 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 23 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 131 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 24 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 41 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 70 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 45 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 210 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 163 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 82 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 44 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 38 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 25 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 20 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 42 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 18 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Glazier Point? 10 Items: A Glazier Point (POINT,GLAZIER) is a piece of thin sheet metal, triangular or diamond shaped, designed to hold a pane of glass in a wooden sash.
What is an Angle Bracket? 1105 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 81 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 32 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1130 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 20 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 49 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 37 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Quick Release Plunger? 13 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 114 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flush Catch? 97 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 13 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 86 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 115 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 177 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 24 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 53 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 219 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 40 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 494 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 353 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 55 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 51 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 12 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 601 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 32 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 39 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 34 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 41 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 21 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping? 19 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 93 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 117 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 31 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 45 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 19 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 832 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 35 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 40 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 75 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 106 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Picture Hanger? 10 Items: A Picture Hanger (HANGER,PICTURE) is a hook like device that is secured to walls, bulkheads, columns and the like, by means of a nail, screw, magnet or adhesive backed cloth, that is included with and/or attached to the hook. It is designed to hold and suspend variuos items such as photographs, paintings, maps, documents, etc.
What is a Protection Bellows? 16 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 57 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 49 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 2535 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 19 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 16 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 1222 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 48 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 64 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Threaded Hinged Standoff? 11 Items: A Threaded Hinged Standoff (STANDOFF,HINGED,THREADED) is a standoff, internally and/or externally, threaded on both ends with a hinge or pivot point to allow for independent movement of the ends.
What is a Spacing Threaded Standoff? 178 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 115 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a Crank Handle? 13 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 29 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Mechanic Equipment Hardware Kit? 87 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Dust And Moisture Seal Protective Cover? 38 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 51 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 308 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 41 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 39 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 178 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 27 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 80 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 86 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 47 of 64

5340-20-001-4633
Access Cover

200014633
GD235-1021-5: RNCC: 3 | RNVC: 2

29 May 2004

5340-20-000-5560
Latch Assembly Body

200005560
10556109: RNCC: 3 | RNVC: 2

21 Jan 2003

5340-21-882-8685
Butt Hinge Leaf

218828685
AP640090: RNCC: 3 | RNVC: 2

10 Sep 1980

5340-20-001-1148
Loop Clamp

200011148
GM427-2623-3: RNCC: 3 | RNVC: 2

6 Nov 2003

5340-20-003-5365
Mounting Bracket

200035365
10639761-PW: RNCC: 3 | RNVC: 2
10639761: RNCC: 5 | RNVC: 1

22 Aug 2007

5340-21-878-0798
Strapping

218780798
63-0074: RNCC: 3 | RNVC: 2
65-3101: RNCC: 5 | RNVC: 2

7 Mar 1978

5340-20-000-5354
Webbing Strap

200005354
BB-680: RNCC: 3 | RNVC: 2

9 Jan 2003

5340-21-874-2770
Loop Clamp

218742770
X275: RNCC: 3 | RNVC: 2
35793: RNCC: 5 | RNVC: 2

1 Dec 1976

5340-20-000-3958
Acce Mounting Clamp

200003958
VA-124MT-VLACC: RNCC: 3 | RNVC: 2

12 Sep 2002

5340-21-913-8922
Corner Brace

219138922
022-2184-01: RNCC: 3 | RNVC: 2

9 Jul 1997

5340-21-901-8585
Angle Bracket

219018585
CF8483506: RNCC: 3 | RNVC: 2
SKL7880: RNCC: 5 | RNVC: 9

9 Mar 1987

5340-21-870-9976
Wrapper She Bracket

218709976
18S5850P2L: RNCC: 3 | RNVC: 2

24 Nov 1976

5340-20-005-9028
Mounting Plate

200059028
0678207-1: RNCC: 3 | RNVC: 2

4 Nov 2010

5340-21-866-9762
Expansion Plug

218669762
818792: RNCC: 3 | RNVC: 2

14 Jul 1972

5340-21-895-0175
Slam Lock

218950175
208U: RNCC: 3 | RNVC: 2
1-208: RNCC: 5 | RNVC: 2

6 Mar 1984

5340-21-913-1256
Fold Table Assembly

219131256
9578221-1: RNCC: 3 | RNVC: 2

22 Sep 1996

5340-20-005-8965
Bumper

200058965
1079927-1: RNCC: 3 | RNVC: 2

1 Nov 2010

5340-21-898-4675
Expansion Shield

218984675
31031: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-21-905-5963
Mounting Bracket

219055963
704-130002-902-0: RNCC: 3 | RNVC: 2

28 Apr 1990

5340-20-005-1967
Access Cover

200051967
10670532-011PEG: RNCC: 3 | RNVC: 2

4 Dec 2009

5340-20-004-5736
Mounting Bracket

200045736
0876533-1: RNCC: 3 | RNVC: 2
0876533: RNCC: 5 | RNVC: 1

13 Feb 2009

5340-21-070-2036
Snap Hook

210702036
334-3-8: RNCC: 3 | RNVC: 2

21 Jul 1967

5340-21-908-4113
Electrical-Mechanical Equipment Post

219084113
215-60021: RNCC: 3 | RNVC: 2
82013-1: RNCC: 3 | RNVC: 2

3 Jun 1992

5340-21-813-0921

5340-20-000-8667
Tension Strap

200008667
792 00 36 0141: RNCC: 3 | RNVC: 2

2 Jul 2003

5340-21-910-8853
Mounting Bracket

219108853
863801: RNCC: 3 | RNVC: 2

5 Aug 1993

5340-21-921-3188
Nonmetallic Bumper

219213188
315-025: RNCC: 3 | RNVC: 2

28 Sep 2001

5340-21-896-2415
Latch Assembly

218962415
26-355-14: RNCC: 3 | RNVC: 2

8 Jul 1984

5340-21-921-1464
Nonmetallic Bumper

219211464
625-4146: RNCC: 3 | RNVC: 2

14 May 2001

5340-21-859-0077
Mortise Lock Set

218590077
836-455: RNCC: 3 | RNVC: 2

16 Apr 1970

5340-21-884-0030
Angle Bracket

218840030
46-57155: RNCC: 3 | RNVC: 2

13 Nov 1980

5340-20-003-8563
Strap Kit

200038563
10672404-011: RNCC: 3 | RNVC: 2

21 Jan 2008

5340-20-003-1661
Mechanic Equipment Hardware Kit

200031661
60-100-5: RNCC: 3 | RNVC: 2

18 Jan 2007

5340-20-000-7338
Mounting Bracket

200007338
0175873-1: RNCC: 3 | RNVC: 2
0175873: RNCC: D | RNVC: 9

25 Apr 2003

5340-20-007-6921
Mounting Bracket

200076921
10652454-001: RNCC: 3 | RNVC: 2
10652454: RNCC: D | RNVC: 9

6 Jun 2013

5340-21-901-8764
Hinge Assembly

219018764
30390: RNCC: 3 | RNVC: 2
30274: RNCC: 5 | RNVC: 9

20 Nov 1987

5340-21-868-9463
Door Closer

218689463
TRADITI0NALDEFREG: RNCC: 3 | RNVC: 1

2 Aug 1974

5340-20-000-9340
Access Cover

200009340
10624966-PEG: RNCC: 3 | RNVC: 2

7 Aug 2003

5340-20-004-0840
Electronic Equipment Hardware Kit

200040840
0978456: RNCC: 3 | RNVC: 2
070802: RNCC: 5 | RNVC: 2

7 May 2008

5340-21-901-8234
Spring Tension Clip

219018234
156C005042: RNCC: 3 | RNVC: 2

17 Jul 1986

5340-21-660-1383
Rope Cleat

216601383
401: RNCC: 3 | RNVC: 1
401S-5: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-908-0624
Blank Panel

219080624
214917-6: RNCC: 3 | RNVC: 2

20 Mar 1991

5340-21-920-5708
Miniature La Clamp

219205708
1200016-1: RNCC: 3 | RNVC: 2
1200016-1: RNCC: 5 | RNVC: 9

23 Mar 2000

5340-21-908-0620
Blank Panel

219080620
214917-2: RNCC: 3 | RNVC: 2

20 Mar 1991

5340-21-848-1393
Butt Hinge

218481393
241N5: RNCC: 3 | RNVC: 1
F241C15 4 X 4: RNCC: 3 | RNVC: 2
69GP1: RNCC: 4 | RNVC: 1

6 Jun 1968

5340-20-007-7673
Mounting Bracket

200077673
10690250-001: RNCC: 3 | RNVC: 2
10690250: RNCC: D | RNVC: 9

11 Jul 2013

5340-21-879-5617
Webbing Strap

218795617
3000360: RNCC: 3 | RNVC: 2
3001496: RNCC: 5 | RNVC: 1

5 Dec 1978

5340-21-891-6571
Clamp

218916571
4381618820: RNCC: 3 | RNVC: 2

7 May 1983

5340-21-870-9283
Retaining Strap

218709283
216: RNCC: 3 | RNVC: 2

8 Jul 1975

5340-20-006-4156
Mounting Bracket

200064156
AC86695-12: RNCC: 3 | RNVC: 2

13 Jul 2011

5340-20-007-9536
Access Cover

200079536
055754: RNCC: 3 | RNVC: 2

26 Sep 2013

5340-21-660-1853
Turnbuckle

216601853
301X1/4-4: RNCC: 3 | RNVC: 2
185-6910: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-008-1302
Mounting Bracket

200081302
10711337-011PEG: RNCC: 3 | RNVC: 2
10711337: RNCC: D | RNVC: 9

25 Nov 2013

5340-21-891-6174
Lock-Out Handle

218916174
SVB-T4: RNCC: 3 | RNVC: 2

21 Mar 1983

5340-21-891-6369
Turnbuckle

218916369
VH171: RNCC: 3 | RNVC: 2

2 Apr 1983

5340-21-908-0498
Manual Control Lever

219080498
05175987: RNCC: 3 | RNVC: 2
01145574: RNCC: 6 | RNVC: 9

11 Jan 1991

5340-21-908-0536
Retaining Strap

219080536
10502912: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-20-005-0930
Mounting Plate

200050930
0989093: RNCC: 3 | RNVC: 2

6 Oct 2009

5340-21-879-5856
Electrical-Mechanical Equipment Post

218795856
3537AD92: RNCC: 3 | RNVC: 2

7 Mar 1979

5340-20-001-5847
Adapter Block

200015847
10660337-001: RNCC: 3 | RNVC: 2

1 Sep 2004

5340-21-874-2879
Dust And Moisture Seal Protective Cap

218742879
94-695: RNCC: 3 | RNVC: 2

8 Feb 1977

5340-21-859-3933
Corrosion Preventive Anode

218593933
C74956-1: RNCC: 3 | RNVC: 2

13 Aug 1970

5340-21-884-0895
Expansion Shield

218840895
TC: RNCC: 3 | RNVC: 2

12 May 1981

5340-21-660-0268
Butt Hinge

216600268
158: RNCC: 3 | RNVC: 1
158C2GD: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-002-8581
Webbing Strap

200028581
10665804-001: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-20-006-7618
Dust And Moisture Seal Protective Plug

200067618
PK3654-51: RNCC: 3 | RNVC: 2

28 Feb 2012

5340-20-005-9986
Mechanical Stop

200059986
82520986-001: RNCC: 3 | RNVC: 2

16 Dec 2010

5340-20-005-5942
Multiple Angle Bracket

200055942
AC40342-05: RNCC: 3 | RNVC: 2

18 May 2010

5340-21-905-5406

5340-21-897-8234
Bracket Assembly

218978234
8282080: RNCC: 3 | RNVC: 2
8282080-1: RNCC: 3 | RNVC: 2
9489-5020: RNCC: 5 | RNVC: 2

13 Dec 1984

5340-20-002-4103
Bonding Strap

200024103
130014BS901-4: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-21-886-5697
Nonmetallic Bumper

218865697
B133029-2: RNCC: 3 | RNVC: 2

24 Aug 1981

5340-21-914-1907
U Connecting Sleeve

219141907
1237-212-1: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-21-862-6124
Snap Hook

218626124
18-1: RNCC: 3 | RNVC: 1

15 Jul 1971

5340-21-920-8269
Access Cover

219208269
9378722-1: RNCC: 3 | RNVC: 2

5 Oct 2000

5340-20-005-8708
Mounting Bracket

200058708
1079907-1: RNCC: 3 | RNVC: 2

14 Oct 2010

5340-20-000-0736
Butt Hinge

200000736
0078204-2: RNCC: 3 | RNVC: 2

26 Apr 2002

5340-21-912-3270
Mounting Bracket

219123270
8727926-3: RNCC: 3 | RNVC: 2

16 Mar 1995

5340-21-908-0891
Butt Hinge Leaf

219080891
10-06929-02: RNCC: 3 | RNVC: 2

16 Jul 1991

5340-21-868-9470
Retaining Band

218689470
NAS29-3K7-50: RNCC: 3 | RNVC: 2

10 Sep 1974

5340-21-897-8606
Nonmetallic Solid Wheel

218978606
749-23203: RNCC: 3 | RNVC: 2

11 Feb 1985

5340-20-005-9506
Angle Bracket

200059506
82520265-003: RNCC: 3 | RNVC: 2

30 Nov 2010

5340-21-912-6759
Corrosion Preventive Anode

219126759
IBM-9452025 DETAIL 2-3C: RNCC: 3 | RNVC: 1

16 Sep 1995

5340-20-003-3121
Mounting Bracket

200033121
A20618-205-1: RNCC: 3 | RNVC: 2
A20618-205-1: RNCC: 5 | RNVC: 2

19 Apr 2007

5340-21-920-2456
Dust And Moisture Seal Protective Plug

219202456
10626263: RNCC: 3 | RNVC: 2

22 Jul 1999

5340-21-908-3610
Ventilating Cover

219083610
CF814516AE: RNCC: 3 | RNVC: 2

18 Dec 1991

5340-21-891-5469

5340-21-860-5730
Screw Hook

218605730
C0RNICEH00K4: RNCC: 3 | RNVC: 1
CORNICEHOOK4: RNCC: 3 | RNVC: 2

15 Oct 1970

5340-20-005-9040
Fixed Lock Plate

200059040
51-05-531: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-20-001-0188
Mounting Plate

200010188
10658344-001PEW: RNCC: 3 | RNVC: 2

9 Sep 2003

5340-20-003-3697
Pivot Bracket

200033697
M118304: RNCC: 3 | RNVC: 2

28 May 2007

5340-21-920-6763
Permanent Magnet

219206763
5000-10090: RNCC: 3 | RNVC: 2
5000-10090: RNCC: 5 | RNVC: 2

1 Jun 2000

5340-20-003-7853
Plate

200037853
10662836-002: RNCC: 3 | RNVC: 2
10662836: RNCC: 5 | RNVC: 1

18 Dec 2007

5340-21-003-5405

5340-20-002-5034
Double Angle Bracket

200025034
C50703-247-1: RNCC: 3 | RNVC: 2
C50703-247: RNCC: D | RNVC: 9

8 Feb 2006

5340-21-880-7754
Spring Tension Clip

218807754
815444-3: RNCC: 3 | RNVC: 2

5 Mar 1980

5340-21-880-7004
Rod End Clevis

218807004
801647-3: RNCC: 3 | RNVC: 2

26 Jun 1979

5340-21-862-4771
Webbing Strap

218624771
89C43373-5: RNCC: 3 | RNVC: 2

13 Jan 1972

5340-21-802-0305
Clamp Cable

218020305
567-0849-002: RNCC: 3 | RNVC: 2

5 Sep 1963

5340-21-878-0147
Power Door Hinge

218780147
H169: RNCC: 3 | RNVC: 2

20 Dec 1977

5340-21-866-9545
Pipe Bracket

218669545
168: RNCC: 3 | RNVC: 1
168-2.000: RNCC: 3 | RNVC: 2

14 Jul 1972

5340-21-898-4155
Door Closer

218984155
4013LH: RNCC: 3 | RNVC: 2

28 Mar 1985

5340-20-007-3001
Locking Stay

200073001
MA401013.01: RNCC: 3 | RNVC: 2

4 Dec 2012

5340-20-002-9967
Plate Splice

200029967
990-00082-1: RNCC: 3 | RNVC: 2

27 Oct 2006

5340-20-002-4836
Stay Tight

200024836
3-556717: RNCC: 3 | RNVC: 2
732445: RNCC: D | RNVC: 9

31 Jan 2006

5340-21-109-6310

5340-21-109-1562

5340-21-901-8482
Retaining Clip

219018482
4743: RNCC: 3 | RNVC: 2

30 Jan 1987

5340-21-905-5891
Retaining Strap

219055891
CF 809 503 A: RNCC: 3 | RNVC: 2

10 Mar 1990

5340-20-005-4446
Mounting Plate

200054446
0776932-1: RNCC: 3 | RNVC: 2

14 Apr 2010

5340-21-882-8844
Flush Lock

218828844
L0K52037B: RNCC: 3 | RNVC: 2

24 Sep 1980

5340-21-905-5894
Rim Clenching Clamp

219055894
CF819147A: RNCC: 3 | RNVC: 2

23 Feb 1990

5340-21-797-1428

5340-21-815-3319

5340-21-882-8551

5340-20-003-5155
Mounting Plate

200035155
10661815-001PW: RNCC: 3 | RNVC: 2
10661815: RNCC: 5 | RNVC: 1

9 Aug 2007

5340-21-818-6279

5340-21-818-5215

5340-21-884-0946
Screw Thread Insert

218840946
R2006SP10: RNCC: 3 | RNVC: 2

19 May 1981

5340-20-002-9663
Access Cover

200029663
10617711: RNCC: 3 | RNVC: 2

2 Oct 2006

5340-20-005-2852
Mounting Plate

200052852
0976241-1: RNCC: 3 | RNVC: 2

1 Feb 2010

5340-21-880-7756
Flush Catch

218807756
20126-5: RNCC: 3 | RNVC: 2

19 Feb 1980

5340-21-911-9562
Double Angle Bracket

219119562
1869-T: RNCC: 3 | RNVC: 2

7 Oct 1994

5340-21-914-0627
Angle Bracket

219140627
215-64012-6: RNCC: 3 | RNVC: 2

9 Apr 1997

5340-21-908-3742
Loop Clamp

219083742
CF445752AE: RNCC: 3 | RNVC: 2
590.65.01.A: RNCC: 5 | RNVC: 2

17 Jan 1992

5340-21-820-0007

5340-21-819-8265

5340-21-848-1723

5340-21-911-1390
Mounting Bracket

219111390
8130-32: RNCC: 3 | RNVC: 2

10 Dec 1993

5340-20-000-5346
Loop Clamp

200005346
567-0309-05: RNCC: 3 | RNVC: 2

9 Jan 2003

5340-20-003-2939
Reinforcement Shiel

200032939
B30501-017-1: RNCC: 3 | RNVC: 2

4 Apr 2007

5340-20-006-6131
Mounting Bracket

200066131
1175030-1: RNCC: 3 | RNVC: 2
1175030: RNCC: D | RNVC: 9

24 Nov 2011

5340-20-000-8256
Angle Bracket

200008256
10638061-001: RNCC: 3 | RNVC: 2
10638061: RNCC: D | RNVC: 9

11 Jun 2003

5340-21-816-3946
Hinge

218163946
360412-2R: RNCC: 3 | RNVC: 2

10 Oct 1964

5340-21-863-3892
Rim Latch Set

218633892
1790: RNCC: 3 | RNVC: 2
132-2046: RNCC: 6 | RNVC: 9

18 Nov 1971

5340-21-891-6939
Shelf Support

218916939
BN101: RNCC: 3 | RNVC: 2

1 Jul 1983

5340-21-913-4823
Lock Key

219134823
68051: RNCC: 3 | RNVC: 2

20 Oct 1996

5340-20-003-8554
Mounting Plate

200038554
10662787-001PG: RNCC: 3 | RNVC: 2

18 Jan 2008

5340-21-660-2079
Mortise Lock Set

216602079
NO PRIM REF: RNCC: 3 | RNVC: 2
21-660-2079: RNCC: 5 | RNVC: 2

5 Jun 1968

5340-21-898-4947
Retaining Strap

218984947
1404: RNCC: 3 | RNVC: 2
LN1404: RNCC: 3 | RNVC: 2
C-776: RNCC: 3 | RNVC: 2

4 Oct 1985

5340-21-913-8793
Grooved Clamp Coupling

219138793
215T60419-4: RNCC: 3 | RNVC: 2

15 Mar 1997

5340-20-004-5989
Access Cover

200045989
300351-001: RNCC: 3 | RNVC: 2
300351: RNCC: 5 | RNVC: 1

23 Feb 2009

5340-21-908-0517
Mounting Plate

219080517
IGDS 9158: RNCC: 3 | RNVC: 2

17 Jan 1991

5340-21-879-5485
Hinge

218795485
T957-2: RNCC: 3 | RNVC: 2

10 Oct 1978

5340-20-001-0844
Webbing Strap

200010844
9279228-2: RNCC: 3 | RNVC: 2

24 Oct 2003

5340-21-878-0508
Strap Hinge

218780508
700: RNCC: 3 | RNVC: 2
1-0729: RNCC: 5 | RNVC: 2

14 Feb 1978

5340-21-913-0071
Mounting Bracket

219130071
9281883-1: RNCC: 3 | RNVC: 2

1 Mar 1996

5340-21-905-5622
Angle Bracket

219055622
704-136100-902-0: RNCC: 3 | RNVC: 2

18 Jul 1989

5340-21-878-0445
Hinge Pin

218780445
210-1721: RNCC: 3 | RNVC: 2

14 Feb 1978

5340-21-896-2412
Handle Grip

218962412
50-9156: RNCC: 3 | RNVC: 2
50-2061: RNCC: 3 | RNVC: 2

8 Jul 1984

5340-20-000-0482
Mounting Plate

200000482
AC19100-29: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-20-001-3208
Mounting Plate

200013208
716523-501: RNCC: 3 | RNVC: 2

17 Mar 2004

5340-21-844-5454
Half Hinge

218445454
C5BM11556-27: RNCC: 3 | RNVC: 2

25 Oct 1966

5340-21-914-8217
Recirculatio Grille

219148217
1095-0000-680-01: RNCC: 3 | RNVC: 2

4 Jul 1998

5340-21-913-0099
Insert

219130099
ST3031-63: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-21-890-4638
Hinge

218904638
507835G2: RNCC: 3 | RNVC: 2

9 Oct 1982

5340-21-921-7882
Cable Hook

219217882
15652: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-20-003-2850
Loop Clamp

200032850
ST1478-07: RNCC: 3 | RNVC: 2

29 Mar 2007

5340-21-844-5560
Angle Bracket

218445560
S6122-82413-11: RNCC: 3 | RNVC: 2

27 Sep 1966

5340-21-905-5310
Spring Tension Clip

219055310
086-004: RNCC: 3 | RNVC: 2
9481504: RNCC: 7 | RNVC: 2

11 Dec 1988

5340-21-911-8237
Nonmetallic Bumper

219118237
SJ-5027 021200 184574: RNCC: 3 | RNVC: 2

10 Mar 1994

5340-20-008-1234
Catch Strike

200081234
10711480-001PEG: RNCC: 3 | RNVC: 2
10711480: RNCC: D | RNVC: 9

21 Nov 2013

5340-20-000-0908
Butt Hinge

200000908
0175153-001: RNCC: 3 | RNVC: 2

1 May 2002

5340-20-006-6209
Antipilferage Seal

200066209
381498FIG10CA/01: RNCC: 3 | RNVC: 2

6 Dec 2011

5340-21-817-5582

5340-21-660-0672
Rim Latch

216600672
3220: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-890-4143
Control Clamp

218904143
8280675: RNCC: 3 | RNVC: 2
16017000100: RNCC: 5 | RNVC: 2
16017000100: RNCC: 5 | RNVC: 2

22 Aug 1982

5340-21-908-0472
Mounting Plate

219080472
10553561: RNCC: 3 | RNVC: 2

9 Jan 1991

5340-21-102-5877
Interna Drawer Knob

211025877
0-0: RNCC: 3 | RNVC: 1

6 Jun 1968

5340-21-910-8785
Guide Hinge

219108785
8461958-2: RNCC: 3 | RNVC: 2

9 Jul 1993

5340-21-660-0310
Strap Hinge

216600310
209RBP: RNCC: 3 | RNVC: 1
209C2HBP-4: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-817-9606

5340-21-817-5455

5340-21-818-0531

5340-21-311-9580
Retaining Band

213119580
J800-76: RNCC: 3 | RNVC: 2
J800-76STEEL: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-008-1453
Access Door Hinge

200081453
10689466-001: RNCC: 3 | RNVC: 2
10689466: RNCC: D | RNVC: 9

28 Nov 2013

5340-20-007-6959
General Purpose Resilient Mount

200076959
10703585-001: RNCC: 1 | RNVC: 2
32291-1: RNCC: 3 | RNVC: 2

10 Jun 2013

5340-21-908-0259
Rod End Clevis

219080259
06264929: RNCC: 3 | RNVC: 2

27 Oct 1990

5340-21-905-5742
Damper

219055742
8611152: RNCC: 3 | RNVC: 2
6080008: RNCC: 5 | RNVC: 1
8611152: RNCC: 5 | RNVC: 2

28 Sep 1989

5340-21-108-8965
Support Hook

211088965
2270: RNCC: 3 | RNVC: 2
2270: RNCC: 3 | RNVC: 2
MC11139: RNCC: 3 | RNVC: 2
YACAN12810: RNCC: 6 | RNVC: 9

4 Jun 1968

5340-21-901-8738
Antipilferage Seal

219018738
PRONGLOK4-2SVC: RNCC: 3 | RNVC: 2

8 Oct 1987

5340-20-005-0877
Angle Bracket

200050877
0989090: RNCC: 3 | RNVC: 2

2 Oct 2009

5340-21-908-0642
Rod End Clevis

219080642
06273364: RNCC: 3 | RNVC: 2

7 Mar 1991

5340-21-660-0270
Butt Hinge

216600270
69GP1: RNCC: 4 | RNVC: 1

6 Jun 1968

5340-20-003-9042
Dust And Moisture Seal Protective Cap

200039042
317-119: RNCC: 3 | RNVC: 2

13 Feb 2008

5340-21-857-9647
Hinge Half

218579647
209-031-816-25: RNCC: 3 | RNVC: 2
209-031-816-025: RNCC: 3 | RNVC: 2

16 Apr 1970

5340-21-879-6993
Loop Clamp

218796993
140-1058: RNCC: 3 | RNVC: 2

23 Jan 1979

5340-21-660-0925
Foot Bolt

216600925
1057: RNCC: 3 | RNVC: 1
1057C18-10: RNCC: 3 | RNVC: 2
1057J-10: RNCC: 3 | RNVC: 2
130-2930: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-888-1577
Electronic Equipment Hardware Kit

218881577
1-292: RNCC: 3 | RNVC: 2

6 Feb 1982

5340-20-005-4515
Spacing Threaded Standoff

200054515
10551965-4: RNCC: 3 | RNVC: 2

19 Apr 2010

5340-21-898-4458
Picture Hanger

218984458
BL15-12: RNCC: 3 | RNVC: 1
BL30835: RNCC: 3 | RNVC: 1
7004230835: RNCC: 3 | RNVC: 2

20 Jun 1985

5340-20-001-3986
Adapter Plate

200013986
10656851-001PG: RNCC: 3 | RNVC: 2

27 Apr 2004

5340-20-007-2001
Mounting Bracket

200072001
87170006-001: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-21-814-1807
Clevis

218141807
205449: RNCC: 3 | RNVC: 2

9 Jun 1964

5340-21-908-0216
Extension Drawer Slide

219080216
3513 172 2011: RNCC: 3 | RNVC: 2

16 Oct 1990

5340-21-808-8616

5340-21-817-8276

5340-21-901-8551
Expansion Shield

219018551
34721: RNCC: 3 | RNVC: 2

24 Feb 1987

5340-21-898-4446
Catch Strike

218984446
183871503: RNCC: 3 | RNVC: 2
B183871503: RNCC: 5 | RNVC: 2

18 Jun 1985

5340-21-841-8904

5340-21-809-7755

5340-21-908-0806
Double Angle Bracket

219080806
M1522802: RNCC: 3 | RNVC: 2
2401-5228.02: RNCC: 3 | RNVC: 2

25 May 1991

5340-20-000-2197
Mounting Bracket

200002197
9379611-1: RNCC: 3 | RNVC: 2

13 Jun 2002

5340-21-895-0813
Rubber Foot

218950813
865-0001: RNCC: 3 | RNVC: 2

19 Mar 1984

5340-21-863-3519
Hinge

218633519
T3068-26: RNCC: 3 | RNVC: 2
131-7624: RNCC: 6 | RNVC: 9

18 Nov 1971

5340-20-007-1312
Corrosion Preventive Anode

200071312
CMR-04: RNCC: 3 | RNVC: 2

11 Sep 2012

5340-20-003-5366
Mounting Bracket

200035366
10639759-PW: RNCC: 3 | RNVC: 2
10639759: RNCC: 5 | RNVC: 1

22 Aug 2007

5340-21-878-0894
Rod End Clevis

218780894
41-87078-16: RNCC: 3 | RNVC: 2

21 Mar 1978

5340-20-004-0370
Striker Plate

200040370
9877970-1: RNCC: 3 | RNVC: 2

15 Apr 2008

5340-20-007-8523
Mounting Plate

200078523
10707830-001PEG: RNCC: 3 | RNVC: 2
10707830: RNCC: D | RNVC: 9

26 Aug 2013

5340-21-660-0377
Floor Hinge

216600377
69GP1: RNCC: 2 | RNVC: 1
BB157C4: RNCC: 3 | RNVC: 2
17001: RNCC: 5 | RNVC: 2

6 Jun 1968

5340-20-008-0961
Dust And Moisture Seal Protective Cover

200080961
TE20012418-100B: RNCC: 3 | RNVC: 2

12 Nov 2013

5340-20-008-1334
Mounting Bracket

200081334
10711946-011PEW: RNCC: 3 | RNVC: 2
10711946: RNCC: D | RNVC: 9

25 Nov 2013

5340-21-908-3344
Nonmetallic Bumper

219083344
12024-2: RNCC: 3 | RNVC: 2

8 Oct 1991

5340-21-848-4578
Retaining Strap

218484578
C0NDUITSTRAP31-2: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-878-0229
Plug Button

218780229
KP100: RNCC: 3 | RNVC: 2

12 Jan 1978

5340-21-891-5405
Dust And Moisture Seal Protective Plug

218915405
534391-1: RNCC: 3 | RNVC: 2

13 Dec 1982

5340-21-887-8499
Butt Hinge Leaf

218878499
761776-103R: RNCC: 3 | RNVC: 2

4 Jan 1982

5340-21-886-2004
Catch Strike

218862004
Z111-8610-57A: RNCC: 3 | RNVC: 2

2 Jun 1981

5340-20-005-5634
Mending Plate

200055634
AC40313-01: RNCC: 3 | RNVC: 2

12 May 2010

5340-20-005-3996
Mounting Plate

200053996
F1303-007420: RNCC: 3 | RNVC: 2

18 Mar 2010

5340-21-863-3521
Hinge

218633521
T7636-26: RNCC: 3 | RNVC: 2
131-7683: RNCC: 6 | RNVC: 9

18 Nov 1971

5340-20-005-5940
Multiple Angle Bracket

200055940
AC40342-07: RNCC: 3 | RNVC: 2

18 May 2010

5340-20-004-5597
Access Cover

200045597
0669-048879-01: RNCC: 3 | RNVC: 2

11 Feb 2009

5340-21-921-6482
Mounting Bracket

219216482
10652293-011PW: RNCC: 3 | RNVC: 2

13 Feb 2002

5340-21-921-0309
Angle Bracket

219210309
0069641-1: RNCC: 3 | RNVC: 2
0069641-1: RNCC: 5 | RNVC: 2
0069641: RNCC: D | RNVC: 9

8 Feb 2001

5340-21-886-5876
Bail Handle

218865876
1205-4C1B: RNCC: 3 | RNVC: 2
1205-4: RNCC: 5 | RNVC: 1

5 Sep 1981

5340-20-003-2449
Rail Drive Socket

200032449
UL-35: RNCC: 3 | RNVC: 2
WSWUL35: RNCC: 5 | RNVC: 2

6 Mar 2007

5340-20-002-6729
Dust And Moisture Seal Protective Cap

200026729
3102069-01: RNCC: 3 | RNVC: 2

5 May 2006

5340-20-005-0094
Webbing Strap

200050094
8321-001: RNCC: 3 | RNVC: 2
8321: RNCC: 5 | RNVC: 1

14 Aug 2009

5340-20-004-1924
Mounting Bracket

200041924
541711-1: RNCC: 3 | RNVC: 2

3 Jul 2008

5340-21-911-9629
Mounting Bracket

219119629
HLN-4426A: RNCC: 3 | RNVC: 2

3 Nov 1994

5340-21-841-0025
Mortise Lock Set

218410025
69GP3: RNCC: 2 | RNVC: 1
830-451: RNCC: 5 | RNVC: 2

6 Jun 1968

5340-21-840-9708
Rim Latch

218409708
996: RNCC: 3 | RNVC: 2
130-4623: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-868-9461
Door Closer

218689461
334H90LHSB: RNCC: 3 | RNVC: 2

2 Aug 1974

5340-21-660-0259
Butt Hinge

216600259
0: RNCC: 3 | RNVC: 1
69GP1: RNCC: 4 | RNVC: 1

6 Jun 1968

5340-20-003-6007
Double Angle Bracket

200036007
0775858-1: RNCC: 3 | RNVC: 2

1 Oct 2007

5340-21-913-2989
Bracket Assembly

219132989
9575913-1: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-21-914-0849
Access Cover

219140849
420-861-260: RNCC: 3 | RNVC: 2
F300 0T 019 4516: RNCC: 6 | RNVC: 9

1 May 1997

5340-20-005-5918
Mounting Bracket

200055918
AC40316-12: RNCC: 3 | RNVC: 2

18 May 2010

5340-21-891-6136
Swivel Caster

218916136
CH98-212: RNCC: 3 | RNVC: 2

15 Mar 1983

5340-20-003-8576
Strap Kit

200038576
10672405-011: RNCC: 3 | RNVC: 2

22 Jan 2008

5340-21-908-4967
Loop Clamp

219084967
900865-013: RNCC: 3 | RNVC: 2

8 Jan 1993

5340-20-006-6638
Mounting Plate

200066638
4100708: RNCC: 3 | RNVC: 2

16 Jan 2012

5340-21-868-9432
Turnbuckle

218689432
G226: RNCC: 3 | RNVC: 1
10-31412: RNCC: 3 | RNVC: 2
G226-518-12: RNCC: 3 | RNVC: 2
5340-5362: RNCC: 6 | RNVC: 9

20 Aug 1974

5340-20-003-2946
Reinforcement Shiel

200032946
B30501-020-1: RNCC: 3 | RNVC: 2

5 Apr 2007

5340-21-882-8049
Belt Support Clamp

218828049
55-4170-310-05: RNCC: 3 | RNVC: 2

30 Apr 1980

5340-20-001-8053
Nonmetallic Bumper

200018053
315-218: RNCC: 3 | RNVC: 2

5 Jan 2005

5340-20-004-5479
Mounting Bracket

200045479
0775324-1: RNCC: 3 | RNVC: 2
0775324: RNCC: 5 | RNVC: 1

9 Feb 2009

5340-20-003-8375
Mounting Bracket

200038375
10665453-011PG: RNCC: 3 | RNVC: 2
10665453: RNCC: 5 | RNVC: 1

11 Jan 2008

5340-21-860-5084
Electrical-Mechanical Equipment Post

218605084
191-276: RNCC: 3 | RNVC: 2

15 Oct 1970

5340-20-008-1357
Mounting Bracket

200081357
10708621-011PEW: RNCC: 3 | RNVC: 2
10708621: RNCC: D | RNVC: 9

26 Nov 2013

5340-20-001-6633
Webbing Strap

200016633
10652842-001: RNCC: 3 | RNVC: 2

14 Oct 2004

5340-21-908-0008
Loop Clamp

219080008
319-PA6: RNCC: 3 | RNVC: 2
C4196 373-C: RNCC: 5 | RNVC: 2

4 May 1990

5340-21-901-8787
Angle Bracket

219018787
8577093-2: RNCC: 3 | RNVC: 2

9 Dec 1987

5340-20-002-5303
Blank Panel

200025303
130014DE301-3: RNCC: 3 | RNVC: 2
130014DE301: RNCC: D | RNVC: 9

24 Feb 2006

5340-21-905-5394

5340-21-905-5385

5340-21-866-9027

5340-21-891-5909
Mortise Latch

218915909
29: RNCC: 3 | RNVC: 2
29: RNCC: 3 | RNVC: 2

20 Feb 1983

5340-21-820-9521

5340-20-002-7852
Mounting Bracket

200027852
C4C1803-3: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-21-908-0416
Electrical-Mechanical Equipment Post

219080416
CF 822 071 A: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-21-660-0265
Butt Hinge

216600265
69GP1: RNCC: 2 | RNVC: 1
3029-8: RNCC: 3 | RNVC: 2
42: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-660-0915
Barrel Bolt

216600915
SC1088: RNCC: 3 | RNVC: 1
SC1088C18-8: RNCC: 3 | RNVC: 2
SC1088J-8: RNCC: 3 | RNVC: 2
130-2978: RNCC: 6 | RNVC: 9

30 Nov 1965

5340-21-848-3951
Strapping

218483951
34-170017: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-912-3280
Loop Clamp

219123280
9277479-1: RNCC: 3 | RNVC: 2

28 Mar 1995

5340-21-901-8217
Filing Cabinet Lock

219018217
5001-LP: RNCC: 3 | RNVC: 2

17 Jul 1986

5340-21-660-0277
Butt Hinge

216600277
1475: RNCC: 3 | RNVC: 1
1475C4-1 1/2: RNCC: 3 | RNVC: 2
131-7604: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-003-4837
Bracket

200034837
10666328-011PG: RNCC: 3 | RNVC: 2
10666328: RNCC: 5 | RNVC: 1

26 Jul 2007

5340-21-868-8443
Turnbuckle

218688443
G225: RNCC: 3 | RNVC: 1
5340-5071: RNCC: 6 | RNVC: 9

17 May 1973

5340-21-895-0873
Angle Bracket

218950873
400066: RNCC: 3 | RNVC: 2

8 Apr 1984

5340-21-841-8569
Door Closer

218418569
502: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-001-2256
Mechanical Stop

200012256
GS321-0565-3: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-20-005-5797
Mending Plate

200055797
AC40314-01-02: RNCC: 3 | RNVC: 2

17 May 2010

5340-21-311-9545
Retaining Band

213119545
J800-16: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-002-4157
Angle Bracket

200024157
130014DE375-1: RNCC: 3 | RNVC: 2
130014DE375: RNCC: D | RNVC: 9

16 Dec 2005

5340-20-003-4871
Mounting Bracket

200034871
10665892-011PG: RNCC: 3 | RNVC: 2
10665892: RNCC: 5 | RNVC: 1

26 Jul 2007

5340-21-901-8957
Retaining Strap

219018957
WW486596-X: RNCC: 3 | RNVC: 2

3 Mar 1988

5340-21-891-6454
Electrical-Mechanical Equipment Post

218916454
642-1931-001: RNCC: 3 | RNVC: 2

9 Apr 1983

5340-21-800-6935
Support Hook

218006935
1316: RNCC: 3 | RNVC: 2
6711: RNCC: 3 | RNVC: 2
C83-1H43: RNCC: 3 | RNVC: 2
1316: RNCC: 5 | RNVC: 2

5 Sep 1963

5340-21-891-6930
Loop Clamp

218916930
338637: RNCC: 3 | RNVC: 2

25 Jun 1983

5340-21-886-5898
Push Door Plate

218865898
4410: RNCC: 3 | RNVC: 1
70085: RNCC: 3 | RNVC: 2

5 Sep 1981

5340-21-853-7555
Sliding Door Track

218537555
BT1: RNCC: 3 | RNVC: 2

23 May 1969

5340-20-004-6293
Barrel Assembly

200046293
1205-524-1: RNCC: 3 | RNVC: 2

2 Mar 2009

5340-21-912-6664
Retaining Strap

219126664
WW 314 314 A: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-21-908-4756
Rod End Clevis

219084756
215-92811-4: RNCC: 3 | RNVC: 2

7 Oct 1992

5340-20-003-9996
Mounting Bracket

200039996
9780404-1: RNCC: 3 | RNVC: 2

1 Apr 2008

5340-21-841-7822
Hinged Hasp

218417822
915-4 1/2: RNCC: 3 | RNVC: 2
915-4 1/2: RNCC: 3 | RNVC: 2
131-4443: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-866-9319
Rubber Patch

218669319
0-0: RNCC: 3 | RNVC: 1

14 Jul 1972

5340-20-006-0086
Mounting Bracket

200060086
0656-035535-03: RNCC: 3 | RNVC: 2

20 Dec 2010

5340-20-004-5824
Angle Bracket

200045824
10668209-011PG: RNCC: 3 | RNVC: 2
10668209-011: RNCC: 5 | RNVC: 1
10668209: RNCC: D | RNVC: 9

17 Feb 2009

5340-21-920-7615
Mounting Plate

219207615
501-202-0013: RNCC: 3 | RNVC: 2

28 Aug 2000

5340-20-006-0269
Mounting Plate

200060269
72550160-003: RNCC: 3 | RNVC: 2

23 Dec 2010

5340-21-660-1179
Screw Hook

216601179
5716: RNCC: 3 | RNVC: 2
131-8989: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-878-0296
Pipe Bracket

218780296
FIG97-1 1-2: RNCC: 3 | RNVC: 2
34-16835: RNCC: 3 | RNVC: 2
97-1 1-2: RNCC: 5 | RNVC: 2

24 Jan 1978

5340-21-848-1906
Loop Clamp

218481906
684-1-11-18: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-003-7875
Mounting Plate

200037875
10668766-001PW: RNCC: 3 | RNVC: 2
10668766: RNCC: 5 | RNVC: 1

19 Dec 2007

5340-21-866-4341
Pipe Bracket

218664341
24M: RNCC: 3 | RNVC: 1
24M-1/2: RNCC: 3 | RNVC: 2
65-1/2: RNCC: 3 | RNVC: 2

19 May 1972

5340-21-911-1377
Mounting Bracket

219111377
8103-21: RNCC: 3 | RNVC: 2

10 Dec 1993

5340-21-908-4786
Butt Hinge Leaf

219084786
215-33009-63: RNCC: 3 | RNVC: 2

18 Oct 1992

5340-21-879-5256
Door Closer

218795256
20-330NH: RNCC: 3 | RNVC: 1

4 Jul 1978

5340-21-882-8739
Angle Bracket

218828739
AP695252: RNCC: 3 | RNVC: 2

10 Sep 1980

5340-21-876-2225
Catch Strike

218762225
01869585: RNCC: 3 | RNVC: 2

27 Sep 1977

5340-21-870-9981
Landing Gea Bracket

218709981
734-183873: RNCC: 3 | RNVC: 2

24 Nov 1976

5340-21-878-0205
Resilient Mount

218780205
423-102-346: RNCC: 3 | RNVC: 2

3 Jan 1978

5340-20-003-0586
Access Cover

200030586
C91001-142-1: RNCC: 3 | RNVC: 2

1 Dec 2006

5340-21-857-8012
Thumb Latch

218578012
4: RNCC: 3 | RNVC: 2

12 Feb 1970

5340-20-008-1804
Mounting Bracket

200081804
10697991-011PEG: RNCC: 3 | RNVC: 2
10697991: RNCC: D | RNVC: 9

18 Dec 2013

5340-21-112-2166
Nonmetallic Bumper

211122166
365687: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-859-1706
Clevis

218591706
A597: RNCC: 3 | RNVC: 2
PDS2B36: RNCC: 5 | RNVC: 2

18 Jun 1970

5340-21-908-4892
Mounting Plate

219084892
8877081-2: RNCC: 3 | RNVC: 2

7 Nov 1992

5340-21-914-4362
Mounting Bracket

219144362
COM40595: RNCC: 3 | RNVC: 2
C40595/B1: RNCC: 5 | RNVC: 2

6 Sep 1997

5340-21-913-4158
Angle Bracket

219134158
10625389-PW: RNCC: 3 | RNVC: 2
10625389: RNCC: D | RNVC: 9

11 Feb 1998

5340-21-861-0676
Nonmetallic Bumper

218610676
734-800013-000: RNCC: 3 | RNVC: 2
70842: RNCC: 5 | RNVC: 9

15 Oct 1970

5340-20-004-1425
Cover

200041425
306641-001: RNCC: 3 | RNVC: 2

28 May 2008

5340-20-005-8832
Access Cover

200058832
10680270-011PEG: RNCC: 3 | RNVC: 2

22 Oct 2010

5340-20-008-1365
Mounting Bracket

200081365
10708188-001PEW: RNCC: 3 | RNVC: 2
10708188: RNCC: D | RNVC: 9

26 Nov 2013

5340-20-004-8770
Access Cover

200048770
10676442-011PEG: RNCC: 3 | RNVC: 2
10676442: RNCC: 5 | RNVC: 1

5 Jun 2009

5340-21-868-9427
Butt Hinge

218689427
284: RNCC: 3 | RNVC: 1
284-3X2C4: RNCC: 3 | RNVC: 2
5340-5300: RNCC: 6 | RNVC: 9

15 Jul 1974

5340-21-886-5902
Webbing Strap

218865902
40-2504: RNCC: 3 | RNVC: 1

5 Sep 1981

5340-20-004-1933
Angle Bracket

200041933
10670481-011: RNCC: 3 | RNVC: 2

4 Jul 2008

5340-21-860-5034
Electrical-Mechanical Equipment Post

218605034
190-101: RNCC: 3 | RNVC: 2

15 Oct 1970

5340-21-905-5549
Pawl

219055549
CF 316 212-R: RNCC: 3 | RNVC: 2

13 May 1989

5340-21-920-6543
Rod End Clevis

219206543
6385393: RNCC: 3 | RNVC: 2
06385393: RNCC: 5 | RNVC: 2

11 May 2000

5340-21-841-9069
Angle Bracket

218419069
254: RNCC: 3 | RNVC: 2
130-3730: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-001-2589
Rod

200012589
500-623-22: RNCC: 3 | RNVC: 2

3 Feb 2004

5340-21-660-0233
Butt Hinge

216600233
840: RNCC: 3 | RNVC: 1
840 2 X 1 9/16: RNCC: 3 | RNVC: 2
131-8027: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-001-5032
Access Cover

200015032
GD421-7807-3: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-20-000-8503
Mounting Bracket

200008503
B40402-075-1: RNCC: 3 | RNVC: 2
B40402-075: RNCC: D | RNVC: 9

20 Jun 2003

5340-21-891-5359
Electrical-Mechanical Equipment Post

218915359
651-0615-002: RNCC: 3 | RNVC: 2

4 Dec 1982

5340-21-908-0794
Door Holder

219080794
M-70: RNCC: 3 | RNVC: 2
DA05174-10: RNCC: 5 | RNVC: 2

11 May 1991

5340-21-660-1051
Door Hook And Eye

216601051
5815: RNCC: 3 | RNVC: 2
131-8851: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-006-9880
Mounting Bracket

200069880
10681129-011PW: RNCC: 3 | RNVC: 2

27 Jun 2012

5340-21-866-9323
Flat Split Key

218669323
200-10-025: RNCC: 3 | RNVC: 2

14 Jul 1972

5340-20-004-2708
Mounting Bracket

200042708
10672437-011: RNCC: 3 | RNVC: 2

3 Sep 2008

5340-21-877-3400
Expansion Plug

218773400
31556: RNCC: 3 | RNVC: 2

18 Oct 1977

5340-20-005-1399
Mounting Plate

200051399
10676337-001PEW: RNCC: 3 | RNVC: 2

2 Nov 2009

5340-20-003-3988
Elastic Strap

200033988
1108-034: RNCC: 3 | RNVC: 2

13 Jun 2007

5340-21-908-3438
Cushioning Pad

219083438
CF819416A: RNCC: 3 | RNVC: 2

25 Oct 1991

5340-20-008-1336
Mounting Bracket

200081336
10706811-011PEW: RNCC: 3 | RNVC: 2
10706811: RNCC: D | RNVC: 9

25 Nov 2013

5340-21-920-5741
Flo Locking Device

219205741
160-FDLD0-01: RNCC: 3 | RNVC: 2

27 Mar 2000

5340-21-920-0684
Seal Retaining Plate

219200684
3117233-01: RNCC: 3 | RNVC: 2

26 Apr 1999

5340-20-001-3318
Webbing Assembly

200013318
B81002-177-1: RNCC: 3 | RNVC: 2
B81002-177: RNCC: D | RNVC: 9

19 Mar 2004

5340-20-000-4505
Access Cover

200004505
10656486-011PEW: RNCC: 3 | RNVC: 2
10656486: RNCC: D | RNVC: 9

10 Oct 2002

5340-21-879-5944
Angle Bracket

218795944
803544-101: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-21-864-2436
Dust And Moisture Seal Protective Cap-Plug

218642436
FC8: RNCC: 3 | RNVC: 1
FC8: RNCC: 3 | RNVC: 1
FC8: RNCC: 3 | RNVC: 2

17 Feb 1972

5340-20-003-1683
Mechanic Equipment Hardware Kit

200031683
1SI0148-60: RNCC: 3 | RNVC: 2

19 Jan 2007

5340-20-002-4682
Angle Bracket

200024682
600-14306-2S: RNCC: 3 | RNVC: 2
600-14306: RNCC: D | RNVC: 9

17 Jan 2006

5340-20-006-0385
Mounting Bracket

200060385
0656-764758-03: RNCC: 3 | RNVC: 2

5 Jan 2011

5340-20-001-5402
Mounting Plate

200015402
600-52220-23: RNCC: 3 | RNVC: 2
600-52220: RNCC: D | RNVC: 9

16 Jul 2004

5340-20-007-5055
Mounting Bracket

200075055
B30603-702-1: RNCC: 3 | RNVC: 2

5 Mar 2013

5340-21-880-7021
Butt Hinge

218807021
506396: RNCC: 3 | RNVC: 1
4-6250-0100: RNCC: 3 | RNVC: 1
4-6251-0100: RNCC: 3 | RNVC: 1

26 Jun 1979

5340-20-000-8097
Catch Strike

200008097
096-598: RNCC: 3 | RNVC: 2

4 Jun 2003

5340-21-841-3726
Retaining Strap

218413726
C3-14: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-007-8877
Cover Retainer

200078877
10711367-011PG: RNCC: 3 | RNVC: 2
10711367: RNCC: D | RNVC: 9

10 Sep 2013

5340-20-000-8492
Nonmetallic Bumper

200008492
RW-38: RNCC: 3 | RNVC: 2

19 Jun 2003

5340-21-330-6332
Rod End Clevis

213306332
11-427C17-2334: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-912-6828
Angle Bracket

219126828
TE10004211-001: RNCC: 3 | RNVC: 2

27 Sep 1995

5340-20-002-2653
Mounting Plate

200022653
10638830: RNCC: 3 | RNVC: 2
10638830-PW: RNCC: 5 | RNVC: 2

20 Sep 2005

5340-20-005-3523
Mounting Bracket

200053523
87800087-105: RNCC: 3 | RNVC: 2

23 Feb 2010

5340-20-008-0958
Mounting Bracket

200080958
0677541-1: RNCC: 3 | RNVC: 2

12 Nov 2013

5340-20-003-1186
Mounting Bracket

200031186
181-83009-1: RNCC: 3 | RNVC: 2

3 Jan 2007

5340-20-001-8015
Housing.

200018015
GM3-M6525A: RNCC: 3 | RNVC: 2

30 Dec 2004

5340-21-908-4728
Retaining Strap

219084728
CF 819 000 AE: RNCC: 3 | RNVC: 2

12 Sep 1992

5340-20-008-1223
Mounting Bracket

200081223
10627506: RNCC: 3 | RNVC: 2

21 Nov 2013

5340-20-007-8407
Mounting Bracket

200078407
1176807-2: RNCC: 1 | RNVC: 2
04751: RNCC: 3 | RNVC: 2
1176807: RNCC: D | RNVC: 9

22 Aug 2013

5340-20-000-0422
Angle Bracket

200000422
10654883-001PW: RNCC: 3 | RNVC: 2

16 Apr 2002

5340-21-921-3559
Cabl Mounting Frame

219213559
9379293-1: RNCC: 3 | RNVC: 2
9379293: RNCC: 6 | RNVC: 9

17 Oct 2001

5340-21-660-0293
Strap Hinge

216600293
900RBP: RNCC: 3 | RNVC: 1
900RBP-4: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-905-5813
Vent Plug

219055813
1119-7NM: RNCC: 3 | RNVC: 2
1119-7: RNCC: 5 | RNVC: 1
1119-007: RNCC: 5 | RNVC: 2

25 Jan 1990

5340-20-007-5060
Mounting Bracket

200075060
B30603-702-2: RNCC: 3 | RNVC: 2

5 Mar 2013

5340-21-921-4677
Carg Strap Assembly

219214677
B51001-019-1: RNCC: 3 | RNVC: 2

23 Nov 2001

5340-20-003-4557
Reinforcemen Sleeve

200034557
318-190015-7: RNCC: 3 | RNVC: 2

11 Jul 2007

5340-20-006-2209
Mounting Bracket

200062209
83220046-102: RNCC: 3 | RNVC: 2

5 Apr 2011

5340-21-114-7093

5340-21-797-1413

5340-20-003-5692
Bracket Support

200035692
B22300-12-1: RNCC: 3 | RNVC: 2

10 Sep 2007

5340-21-888-1227
Expansion Shield

218881227
38570: RNCC: 3 | RNVC: 2

16 Jan 1982

5340-21-108-8727
Snap Hook

211088727
82495C251: RNCC: 3 | RNVC: 2
ZACAN1046: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-897-8193
Flush Catch

218978193
11600: RNCC: 3 | RNVC: 2

22 Dec 1984

5340-21-912-5791
Dust And Moisture Seal Protective Cap

219125791
LS00076-1: RNCC: 3 | RNVC: 2
GC5 RED: RNCC: 6 | RNVC: 9

4 May 1995

5340-20-006-3367
Mechanic Equipment Hardware Kit

200063367
1080222-1: RNCC: 3 | RNVC: 2

8 Jun 2011

5340-20-002-9132
Mounting Plate

200029132
C50703-255-1: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-20-002-4049
Mounting Bracket

200024049
130014DE225-1: RNCC: 3 | RNVC: 2
130014DE225: RNCC: D | RNVC: 9

15 Dec 2005

5340-21-311-8612
Retaining Strap

213118612
LN10: RNCC: 3 | RNVC: 2
C22-2-18: RNCC: 4 | RNVC: 1
C22-2N018: RNCC: 4 | RNVC: 1

6 Jun 1968

5340-20-001-9731
Webbing Strap

200019731
10607015-110: RNCC: 3 | RNVC: 2
10607015: RNCC: D | RNVC: 9

5 Apr 2005

5340-21-868-9860
Expansion Shield

218689860
151-2485: RNCC: 3 | RNVC: 2
151-86035: RNCC: 3 | RNVC: 2
2485: RNCC: 3 | RNVC: 2

23 Dec 1974

5340-21-886-2412
Door Closer

218862412
21: RNCC: 3 | RNVC: 2

28 Jul 1981

5340-21-905-5237

5340-21-116-1863

5340-21-868-8231
Antipilferage Seal

218688231
0-0: RNCC: 3 | RNVC: 2

15 Mar 1973

Load More Results