What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

Hardware, Commercial - Canada (CA)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Canada (CA) - NCB is 20 or 21

Page 46 of 64

NSN Format for Hardware, Commercial
Codified by Canada

53	40	21	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Canada (CA)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 190 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 63 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 26 Items
What is a Rod End Connector? 44 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 69 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 226 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 94 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 20 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 582 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 43 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 202 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 65 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Shelf Bracket? 33 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Door Hook And Eye? 22 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 77 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 12 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 23 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 23 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 44 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 13 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is a Friction Catch? 38 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 15 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 39 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 26 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 86 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 20 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 42 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 91 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 57 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 25 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 163 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 101 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 21 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 16 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 288 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 52 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 23 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 131 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 24 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 41 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 70 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 45 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 210 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 163 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 82 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 44 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 38 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 25 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 20 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 42 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 18 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Glazier Point? 10 Items: A Glazier Point (POINT,GLAZIER) is a piece of thin sheet metal, triangular or diamond shaped, designed to hold a pane of glass in a wooden sash.
What is an Angle Bracket? 1105 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 81 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 32 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1130 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 20 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 49 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 37 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Quick Release Plunger? 13 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 114 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flush Catch? 97 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 13 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 86 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 115 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 177 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 24 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 53 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 219 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 40 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 494 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 353 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 55 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 51 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 12 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 601 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 32 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 39 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 34 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 41 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 21 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping? 19 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 93 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 117 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 31 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 45 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 19 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 832 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 35 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 40 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 75 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 106 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Picture Hanger? 10 Items: A Picture Hanger (HANGER,PICTURE) is a hook like device that is secured to walls, bulkheads, columns and the like, by means of a nail, screw, magnet or adhesive backed cloth, that is included with and/or attached to the hook. It is designed to hold and suspend variuos items such as photographs, paintings, maps, documents, etc.
What is a Protection Bellows? 16 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 57 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 49 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 2535 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 19 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 16 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 1222 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 48 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 64 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Threaded Hinged Standoff? 11 Items: A Threaded Hinged Standoff (STANDOFF,HINGED,THREADED) is a standoff, internally and/or externally, threaded on both ends with a hinge or pivot point to allow for independent movement of the ends.
What is a Spacing Threaded Standoff? 178 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 115 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a Crank Handle? 13 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 29 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Mechanic Equipment Hardware Kit? 87 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Dust And Moisture Seal Protective Cover? 38 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 51 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 308 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 41 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 39 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 178 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 27 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 80 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 86 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 46 of 64

5340-21-814-3400

5340-21-814-4154

5340-20-006-5835
Mechanic Equipment Hardware Kit

200065835
1080009-1: RNCC: 3 | RNVC: 2

4 Nov 2011

5340-21-898-4136
Furniture Glide

218984136
1: RNCC: 3 | RNVC: 2

26 Mar 1985

5340-21-920-8268
Access Cover

219208268
9378692-1: RNCC: 3 | RNVC: 2

5 Oct 2000

5340-21-908-0183
Rod End Connector

219080183
13611: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-21-908-3921
Access Cover

219083921
69200.58.0041: RNCC: 3 | RNVC: 2

22 Feb 1992

5340-21-908-0992
Resilient Mount Plate

219080992
161 59 43 0035: RNCC: 3 | RNVC: 2

29 Aug 1991

5340-21-866-9767
Corrosion Preventive Anode

218669767
832598: RNCC: 3 | RNVC: 2

14 Jul 1972

5340-21-810-5669
Clevis

218105669
175024-100: RNCC: 3 | RNVC: 2

27 Oct 1964

5340-20-002-1729
Mounting Bracket

200021729
10656863-011: RNCC: 3 | RNVC: 2
10656863: RNCC: D | RNVC: 9

19 Jul 2005

5340-20-006-5722
Manual Control Handle

200065722
10661829-011PEW: RNCC: 3 | RNVC: 2

1 Nov 2011

5340-21-920-3356
Tray Lock

219203356
8778036-1: RNCC: 3 | RNVC: 2

23 Sep 1999

5340-21-910-8732
Door Holder

219108732
8668202-1: RNCC: 3 | RNVC: 2

3 Jul 1993

5340-20-006-0624
Clip Assy

200060624
82520479-001: RNCC: 3 | RNVC: 2

19 Jan 2011

5340-20-002-7171
Mounting Bracket

200027171
25-1864-80-00-01: RNCC: 3 | RNVC: 2

25 May 2006

5340-21-877-3033
Retaining Clip

218773033
35213: RNCC: 3 | RNVC: 1

11 Oct 1977

5340-21-877-3367
Door Holder

218773367
W1X: RNCC: 3 | RNVC: 2

18 Oct 1977

5340-21-913-9910
Mounting Bracket

219139910
ML12953: RNCC: 3 | RNVC: 2

7 Nov 1997

5340-21-895-0325
Dust And Moisture Seal Protective Cap

218950325
PPDC6HK: RNCC: 3 | RNVC: 2

28 Jan 1984

5340-20-007-6433
Mounting Bracket

200076433
83210393-101: RNCC: 3 | RNVC: 2

10 May 2013

5340-20-004-8979
General Purpose Access Door

200048979
0669-765458-10: RNCC: 3 | RNVC: 2

15 Jun 2009

5340-20-005-9730
Access Cover

200059730
82521016-011: RNCC: 3 | RNVC: 2

9 Dec 2010

5340-20-006-1790
Mounting Bracket

200061790
85350994-001: RNCC: 3 | RNVC: 2

17 Mar 2011

5340-21-908-0954
Spring Tension Clip

219080954
293 13 0090: RNCC: 3 | RNVC: 2

23 Aug 1991

5340-21-809-4625

5340-21-866-9038
Coat And Hat Hook

218669038
T1210C4: RNCC: 3 | RNVC: 2

16 Jun 1972

5340-21-842-8476
Butt Hinge Leaf

218428476
107S8328-13: RNCC: 3 | RNVC: 2

26 Apr 1966

5340-21-914-2755
Rod End Clevis

219142755
WW322650: RNCC: 3 | RNVC: 2
59.29.071.A: RNCC: 5 | RNVC: 2

12 Jul 1997

5340-21-914-1574
Mounting Plate

219141574
215-51213-8: RNCC: 3 | RNVC: 2

16 May 1997

5340-21-660-1381
Rope Cleat

216601381
401: RNCC: 3 | RNVC: 1
401S-3 1/2: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-000-2306
Mounting Plate

200002306
9876799-1: RNCC: 3 | RNVC: 2

18 Jun 2002

5340-20-002-4094
Angle Bracket

200024094
130014DE295-1: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-20-004-0353
Mount Assembly

200040353
9877897-1: RNCC: 3 | RNVC: 2

14 Apr 2008

5340-20-003-0645
Loop Clamp

200030645
086-553: RNCC: 3 | RNVC: 2

5 Dec 2006

5340-21-895-0698
Permanent Magnet

218950698
7973: RNCC: 3 | RNVC: 2
7974-1: RNCC: 3 | RNVC: 2

19 Mar 1984

5340-21-890-4416

5340-21-845-1553

5340-21-920-9559
Alligator. Clip

219209559
ML2003A: RNCC: 3 | RNVC: 2

14 Dec 2000

5340-21-879-5255
Door Closer

218795255
251RH: RNCC: 3 | RNVC: 2

4 Jul 1978

5340-20-002-4120
Mounting Bracket

200024120
130014DE344-1: RNCC: 3 | RNVC: 2
130014DE344: RNCC: D | RNVC: 9

15 Dec 2005

5340-21-911-1386
Mounting Bracket

219111386
8105-32: RNCC: 3 | RNVC: 2

10 Dec 1993

5340-21-911-9130
Access Cover

219119130
10-03629-01: RNCC: 3 | RNVC: 2

18 Jun 1994

5340-21-911-9154
Retaining Strap

219119154
1092V: RNCC: 3 | RNVC: 2

9 Jul 1994

5340-21-802-4689
Swivel Caster

218024689
42: RNCC: 3 | RNVC: 2

23 Dec 1964

5340-21-809-1185

5340-21-911-1019
Upper Door Assembly

219111019
9278836-1: RNCC: 3 | RNVC: 2

11 Sep 1993

5340-21-908-4121
Rod End Connector

219084121
215-90379-4: RNCC: 3 | RNVC: 2

12 Jun 1992

5340-21-814-1469

5340-21-813-8604

5340-21-813-8925

5340-21-852-7652
Nonmetallic Bumper

218527652
2198W1: RNCC: 3 | RNVC: 2

13 Aug 1970

5340-20-003-8073
Module Rear

200038073
0777239: RNCC: 3 | RNVC: 2

24 Dec 2007

5340-20-004-2730
Mounting Bracket

200042730
0875023: RNCC: 3 | RNVC: 2

4 Sep 2008

5340-21-848-3717

5340-21-814-5096

5340-21-814-1370

5340-21-848-2816
Half Hinge

218482816
803557-1: RNCC: 3 | RNVC: 2

19 Feb 1968

5340-21-912-6746
Mending Plate

219126746
WW 434 499 A: RNCC: 3 | RNVC: 2

4 Aug 1995

5340-21-847-0521

5340-21-002-4720

5340-21-891-5638
Hole Plug

218915638
134-0163-00: RNCC: 3 | RNVC: 2

22 Jan 1983

5340-20-005-9083
Mounting Bracket

200059083
10667672-011: RNCC: 3 | RNVC: 2

9 Nov 2010

5340-21-908-0230
Angle Bracket

219080230
0130-62200-043: RNCC: 3 | RNVC: 2

20 Oct 1990

5340-21-878-0186

5340-21-876-2283
Access Cover

218762283
T30860: RNCC: 3 | RNVC: 2

4 Oct 1977

5340-21-859-0278
Butt Hinge

218590278
69GP1: RNCC: 3 | RNVC: 1
FBB193: RNCC: 3 | RNVC: 1

16 Apr 1970

5340-21-849-8302
Rigid Surface Mechanical Patch

218498302
B0ILERACEPLUG: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-842-0105

5340-21-843-5886

5340-21-843-4571

5340-21-886-2211
Electrical-Mechanical Equipment Post

218862211
36673-4: RNCC: 3 | RNVC: 2

7 Jul 1981

5340-20-004-5530
Mounting Bracket

200045530
0877895-1: RNCC: 3 | RNVC: 2

9 Feb 2009

5340-20-006-3374
Mechanic Equipment Hardware Kit

200063374
1080228-1: RNCC: 3 | RNVC: 2

8 Jun 2011

5340-21-912-1099
Cam Lock Assembly

219121099
9475711: RNCC: 3 | RNVC: 2

1 Sep 1994

5340-21-898-4694
Expansion Shield

218984694
59282: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-20-003-1840
Boss

200031840
541304: RNCC: 3 | RNVC: 2

1 Feb 2007

5340-21-901-8777
General Purpose Resilient Mount

219018777
H4 8MN: RNCC: 3 | RNVC: 2
H4 8MM: RNCC: 3 | RNVC: 2

2 Dec 1987

5340-21-712-6637

5340-20-006-4888
Mechanical Stop

200064888
10677700-011PG: RNCC: 3 | RNVC: 2

6 Sep 2011

5340-20-007-7097
Mounting Bracket

200077097
720709-001: RNCC: 3 | RNVC: 2

14 Jun 2013

5340-20-005-9076
Mounting Bracket

200059076
10666413-011PW: RNCC: 3 | RNVC: 2

9 Nov 2010

5340-20-001-3073
Mounting Bracket

200013073
0376147-2: RNCC: 3 | RNVC: 2
0376147: RNCC: D | RNVC: 9

12 Mar 2004

5340-20-001-1124
Access Cover

200011124
GM229-6901-81: RNCC: 3 | RNVC: 2

6 Nov 2003

5340-21-868-9987
Double Angle Bracket

218689987
DL395: RNCC: 3 | RNVC: 2
7125-0128: RNCC: 6 | RNVC: 9

11 Mar 1975

5340-20-002-8293
Spring Tension Clip

200028293
251922010005: RNCC: 3 | RNVC: 2

12 Jul 2006

5340-21-901-8785
Pivot Hinge

219018785
TC130: RNCC: 3 | RNVC: 2
8646F-0301: RNCC: 5 | RNVC: 2

9 Dec 1987

5340-21-908-0462
Dust And Moisture Seal Protective Cap-Plug

219080462
10 304 910: RNCC: 3 | RNVC: 2
N15-35-25: RNCC: 5 | RNVC: 2

5 Jan 1991

5340-21-813-5577
Resilient Mount

218135577
110AB298: RNCC: 3 | RNVC: 2
2Z6721-445A: RNCC: 5 | RNVC: 2
FT445A: RNCC: 5 | RNVC: 2

26 Jun 1964

5340-21-878-0675

5340-21-859-4805

5340-20-002-4104
Mounting Plate

200024104
130014DE415-1: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-21-896-9937
Key Blank

218969937
E-45: RNCC: 3 | RNVC: 2

19 Nov 1984

5340-21-902-9437
Mounting Bracket

219029437
1960-6763: RNCC: 3 | RNVC: 2

10 Feb 1987

5340-21-911-9581
Dust And Moisture Seal Protective Plug

219119581
PK1219: RNCC: 3 | RNVC: 2

22 Oct 1994

5340-21-913-0755
Dust And Moisture Seal Protective Cap

219130755
706094-001: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-20-005-7983
Loop Clamp

200057983
086-557: RNCC: 3 | RNVC: 2

16 Aug 2010

5340-21-890-4649
Spring Tension Clip

218904649
000: RNCC: 3 | RNVC: 2

18 Oct 1982

5340-20-000-8470
Access Cover

200008470
0175184-100: RNCC: 3 | RNVC: 2
0175184: RNCC: D | RNVC: 9

18 Jun 2003

5340-20-007-3808
Mounting Bracket

200073808
10706100-011PW: RNCC: 3 | RNVC: 2
10706100: RNCC: D | RNVC: 9

10 Jan 2013

5340-21-889-8510
Mortise Latch Set

218898510
9522: RNCC: 3 | RNVC: 2

4 Jul 1982

5340-21-921-1894
Handle Assembly.

219211894
CF 499 551 AE: RNCC: 3 | RNVC: 2

13 Jun 2001

5340-21-849-9888

5340-20-008-1435
Access Cover

200081435
10682583-011PG: RNCC: 3 | RNVC: 2
10682583: RNCC: D | RNVC: 9

27 Nov 2013

5340-21-913-8954
Mounting Plate

219138954
9740003-1: RNCC: 3 | RNVC: 2

24 Apr 1997

5340-21-874-3715
Retaining Band

218743715
1-189687: RNCC: 3 | RNVC: 2

8 Mar 1977

5340-21-921-2375
Retaining Strap

219212375
0078461-1: RNCC: 3 | RNVC: 2

17 Jul 2001

5340-20-007-1374
Dust And Moisture Seal Boot

200071374
MUSB-2A111-024-BP: RNCC: 3 | RNVC: 2
91922073: RNCC: 5 | RNVC: 2

12 Sep 2012

5340-21-852-7520

5340-21-853-7989

5340-21-855-3819
Clevis

218553819
37B201318P102: RNCC: 3 | RNVC: 2

16 Oct 1969

5340-21-898-4408
Screw Thread Insert

218984408
709C02-0129: RNCC: 3 | RNVC: 1
3585-02BN0129: RNCC: 3 | RNVC: 2
PS62116-05: RNCC: 3 | RNVC: 2
62116-05: RNCC: 5 | RNVC: 2

11 Jun 1985

5340-21-895-0335
Padlock

218950335
6B62W/CORE574: RNCC: 3 | RNVC: 2

4 Feb 1984

5340-20-005-6524
Mounting Bracket

200056524
902179-1: RNCC: 3 | RNVC: 2

2 Jun 2010

5340-20-002-4124
Mounting Bracket

200024124
130014DE103-1: RNCC: 3 | RNVC: 2

16 Dec 2005

5340-21-853-6410

5340-21-863-4021

5340-21-911-9181
Base

219119181
C484034-1: RNCC: 3 | RNVC: 2

23 Jul 1994

5340-21-879-5970
Door Top Hinge

218795970
82015-1: RNCC: 3 | RNVC: 2

24 Apr 1979

5340-21-910-8784
Guide Hinge

219108784
8461958-1: RNCC: 3 | RNVC: 2

9 Jul 1993

5340-20-003-2170
Angle Bracket

200032170
B30601-035-1: RNCC: 3 | RNVC: 2

19 Feb 2007

5340-20-006-1459
Inistallation Kit -

200061459
A20618-039-1: RNCC: 3 | RNVC: 2

4 Mar 2011

5340-20-001-0066
Mounting. Plate

200010066
10652848-001PEW: RNCC: 3 | RNVC: 2

5 Sep 2003

5340-21-865-2112
Dust And Moisture Seal Protective Plug

218652112
P5ERA: RNCC: 3 | RNVC: 2

17 Mar 1972

5340-20-005-6669
Troop Y-Dampener

200056669
AC16012: RNCC: 3 | RNVC: 2

9 Jun 2010

5340-20-007-6430
Mounting Plate

200076430
83210387-001: RNCC: 3 | RNVC: 2

10 May 2013

5340-21-884-0845
Helical Compression Spring Seat

218840845
742033007: RNCC: 3 | RNVC: 2

19 May 1981

5340-21-905-5291
Angle Bracket

219055291
15010937865: RNCC: 3 | RNVC: 2
8281272: RNCC: 6 | RNVC: 9

27 Nov 1988

5340-21-848-1907
Plug Button

218481907
B893: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-841-7629
Pipe Bracket

218417629
460-7337: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-908-4727
Mounting Plate

219084727
CF 813 331 A: RNCC: 3 | RNVC: 2

12 Sep 1992

5340-21-908-4348
Access Cover

219084348
CF 122 279 A: RNCC: 3 | RNVC: 2

25 Jun 1992

5340-21-913-0074
Mounting Plate

219130074
9281950-1: RNCC: 3 | RNVC: 2

1 Mar 1996

5340-21-913-2328
Access Cover

219132328
1444001: RNCC: 3 | RNVC: 2

31 May 1996

5340-21-911-9563
Mounting Bracket

219119563
051125 053433: RNCC: 3 | RNVC: 2

7 Oct 1994

5340-21-808-1923
Handle Grip

218081923
41A92071: RNCC: 3 | RNVC: 2

30 Sep 1963

5340-21-868-9042
Nonmetallic Bumper

218689042
4444: RNCC: 3 | RNVC: 2

31 Dec 1973

5340-21-914-5351
Bracket Assem Cover

219145351
10638159: RNCC: 3 | RNVC: 2

17 Oct 1998

5340-20-003-8177
Angle Bracket

200038177
050-97335: RNCC: 3 | RNVC: 2

4 Jan 2008

5340-21-921-0289
Brace.

219210289
10603328: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-21-311-9568
Retaining Band

213119568
J800-48: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-921-6850
Mounting Bracket

219216850
10656539-001PW: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-21-905-5360
Webbing Strap

219055360
8281343-1: RNCC: 3 | RNVC: 2
160 19 0093 00: RNCC: 5 | RNVC: 9

25 Jan 1989

5340-20-000-1747
Mounting Bracket

200001747
9876876-1: RNCC: 3 | RNVC: 2

30 May 2002

5340-21-660-2409
Key Blank

216602409
4141B: RNCC: 3 | RNVC: 2
S154R245-1: RNCC: 3 | RNVC: 2
S154R295-1: RNCC: 3 | RNVC: 2
1225C: RNCC: 3 | RNVC: 2
625C: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-914-2297
Angle Bracket

219142297
139381-1: RNCC: 3 | RNVC: 2

14 Feb 1998

5340-21-906-3138
Dust And Moisture Seal Boot

219063138
99 9 64 006: RNCC: 3 | RNVC: 2

14 Sep 1989

5340-20-005-8176
Mounting Bracket

200058176
0875445-1: RNCC: 3 | RNVC: 2

1 Sep 2010

5340-21-910-8719
Cushioning Pad

219108719
8961197-1: RNCC: 3 | RNVC: 2

24 Jun 1993

5340-20-004-9354
Latch Assembly

200049354
0878152-1: RNCC: 3 | RNVC: 2

6 Jul 2009

5340-21-913-9909
Mounting Plate

219139909
EB975700009-M: RNCC: 3 | RNVC: 2

11 Nov 1997

5340-20-003-2251
Panic Bar

200032251
10097PBAR: RNCC: 3 | RNVC: 2
10304-DOOR ITEM 9: RNCC: 5 | RNVC: 2

22 Feb 2007

5340-20-001-2995
Mounting Bracket

200012995
0376138-1: RNCC: 3 | RNVC: 2
0376138: RNCC: D | RNVC: 9

10 Mar 2004

5340-20-001-3853
Buckle

200013853
2108-A64: RNCC: 3 | RNVC: 2

16 Apr 2004

5340-21-877-3389
Expansion Plug

218773389
31573: RNCC: 3 | RNVC: 2

18 Oct 1977

5340-21-921-2205
Loop Clamp

219212205
22A-256: RNCC: 3 | RNVC: 2

5 Jul 2001

5340-21-901-8979
Retaining Clip

219018979
0026-6284: RNCC: 3 | RNVC: 2

15 Apr 1988

5340-21-660-1060
Door Hook And Eye

216601060
NO PRIM REF: RNCC: 3 | RNVC: 2
21-660-1060: RNCC: 5 | RNVC: 2

5 Jun 1968

5340-21-847-4000
Sliding Door Track

218474000
166B: RNCC: 3 | RNVC: 2
166B: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-891-6114
Swivel Support For

218916114
SL8SP: RNCC: 3 | RNVC: 2

15 Mar 1983

5340-21-900-1411
Loop Clamp

219001411
5015477: RNCC: 3 | RNVC: 2

21 Jan 1986

5340-20-006-4520
Double Angle Bracket

200064520
10552194-15: RNCC: 3 | RNVC: 2

5 Aug 2011

5340-21-905-5302
Vent Plug

219055302
8559820-6: RNCC: 3 | RNVC: 2

4 Dec 1988

5340-21-898-4306
Assembly Spring

218984306
2030-3054LH: RNCC: 3 | RNVC: 2

9 May 1985

5340-21-910-8721
Angle Bracket

219108721
8668305-1: RNCC: 3 | RNVC: 2

25 Jun 1993

5340-20-005-9569
Vent Plug

200059569
8941-2: RNCC: 3 | RNVC: 2

2 Dec 2010

5340-21-913-0745
Mounting Bracket

219130745
9481359-100: RNCC: 3 | RNVC: 2

15 Mar 1996

5340-21-911-1419
Un Partition Hanger

219111419
8079-32: RNCC: 3 | RNVC: 2

24 Dec 1993

5340-21-914-7328
Asse Mounting Plate

219147328
VC-97-00154: RNCC: 3 | RNVC: 2

10 Apr 1998

5340-21-908-0590
Access Cover

219080590
10552704: RNCC: 3 | RNVC: 2

8 Feb 1991

5340-21-877-3448
Expansion Plug

218773448
31516: RNCC: 3 | RNVC: 2

18 Oct 1977

5340-21-855-1416
Resilient Mount

218551416
S2A15: RNCC: 3 | RNVC: 2

23 Jul 1969

5340-21-868-8151
Butt Hinge

218688151
F241: RNCC: 3 | RNVC: 1
69GP1: RNCC: 4 | RNVC: 1

15 Dec 1972

5340-21-908-0295
Cradle Assembly

219080295
8877952: RNCC: 3 | RNVC: 2

7 Jun 1991

5340-21-108-8848
Spring Tension Clip

211088848
ZA36139: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-866-9509
Corrosion Preventive Anode

218669509
B34762A1: RNCC: 3 | RNVC: 2

14 Jul 1972

5340-21-868-9245
Plug

218689245
57207SS440: RNCC: 3 | RNVC: 2

12 Jul 1974

5340-21-910-8767
Coat And Hat Hook

219108767
2441-32: RNCC: 3 | RNVC: 2

8 Jul 1993

5340-21-660-1414
Rope Cleat

216601414
AP240: RNCC: 3 | RNVC: 2
DNCS48SK3PATT240: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-897-8663
Top Pin

218978663
34-103: RNCC: 3 | RNVC: 2

14 Feb 1985

5340-21-912-5849
Dust And Moisture Seal Protective Plug

219125849
245-044: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-21-866-4191
Hasp Staple

218664191
2282: RNCC: 3 | RNVC: 1
D74-26: RNCC: 3 | RNVC: 2
200-10-290: RNCC: 6 | RNVC: 9

19 May 1972

5340-21-908-0004
Retaining Strap

219080004
CF807602A: RNCC: 3 | RNVC: 2

4 May 1990

5340-21-007-3320
Corrosion Preventive Anode

210073320
067-33473: RNCC: 3 | RNVC: 2
67-33473: RNCC: 5 | RNVC: 2

6 Jun 1968

5340-21-920-1050
Dust And Moisture Seal Protective Plug

219201050
245-026: RNCC: 3 | RNVC: 2
10617018: RNCC: 7 | RNVC: 2

7 May 1999

5340-21-908-0352
Loop Clamp

219080352
06 331 688: RNCC: 3 | RNVC: 2
01 132 160: RNCC: 3 | RNVC: 2

24 Nov 1990

5340-21-913-8887
Mechanical Stop

219138887
215-90540: RNCC: 3 | RNVC: 2

25 Mar 1997

5340-20-001-4986
Mounting Bracket

200014986
TE20002328-201: RNCC: 3 | RNVC: 2
TE20002328: RNCC: D | RNVC: 9

22 Jun 2004

5340-20-002-7237
Spacer

200027237
150-566: RNCC: 3 | RNVC: 2

29 May 2006

5340-21-818-3883

5340-21-866-9418
Hinge

218669418
93646: RNCC: 3 | RNVC: 2

14 Jul 1972

5340-20-007-6965
Mounting Bracket

200076965
1176909-1: RNCC: 1 | RNVC: 2
05173: RNCC: 3 | RNVC: 2

10 Jun 2013

5340-20-005-3014
Corner Brace

200053014
0778041-1: RNCC: 3 | RNVC: 2

11 Feb 2010

5340-21-810-4144
Loop Clamp

218104144
316-4-6: RNCC: 3 | RNVC: 2

25 Oct 1966

5340-20-007-6494
Lock-Release Lever

200076494
IPL64100-02-09: RNCC: 3 | RNVC: 2

14 May 2013

5340-21-884-0028
Angle Bracket

218840028
46-57910: RNCC: 3 | RNVC: 2

13 Nov 1980

5340-20-001-8014
Spring Lead

200018014
GM3-M6505A: RNCC: 3 | RNVC: 2

30 Dec 2004

5340-20-008-1728
Mounting Bracket

200081728
M14-JYM-0015: RNCC: 3 | RNVC: 2

11 Dec 2013

5340-21-901-8435
Nut And Bolt Retainer

219018435
600-37112-1: RNCC: 3 | RNVC: 2

15 Jan 1987

5340-21-853-7275
Loop Clamp

218537275
MS21104D30: RNCC: 2 | RNVC: 2

11 Jan 1969

5340-20-003-7874
Mounting Bracket

200037874
10664293-001PW: RNCC: 3 | RNVC: 2
10664293: RNCC: 5 | RNVC: 1

19 Dec 2007

5340-20-005-9329
Access Cover

200059329
TE10016975-001: RNCC: 3 | RNVC: 2

23 Nov 2010

5340-20-004-1931
Mounting Plate

200041931
10667360-011: RNCC: 3 | RNVC: 2

4 Jul 2008

5340-20-005-0097
Webbing Strap

200050097
8320-001: RNCC: 3 | RNVC: 2
8320: RNCC: 5 | RNVC: 1

14 Aug 2009

5340-21-908-0814
Access Door

219080814
B568097-3: RNCC: 3 | RNVC: 2

31 May 1991

5340-20-004-1210
Mounting Plate

200041210
10628569-PG: RNCC: 3 | RNVC: 2

14 May 2008

5340-20-006-3270
Mechanical Componen

200063270
1097-0002: RNCC: 3 | RNVC: 2

2 Jun 2011

5340-21-905-5692
Helical Compression Spring Seat

219055692
991.00.24.0005: RNCC: 3 | RNVC: 2

31 Aug 1989

5340-21-908-0656
Extension Drawer Slide

219080656
C917269/001: RNCC: 3 | RNVC: 2
5003NSK: RNCC: 5 | RNVC: 1

9 Apr 1991

5340-20-003-4729
Mounting Plate

200034729
10639244-PG: RNCC: 3 | RNVC: 2

19 Jul 2007

5340-21-860-5920
Strap And Scr Hinge

218605920
909-6: RNCC: 3 | RNVC: 2

15 Oct 1970

5340-20-000-6977
Seal Retaining Plate

200006977
3112197-01: RNCC: 3 | RNVC: 2

8 Apr 2003

5340-21-805-4752
Buckle

218054752
ID54-114: RNCC: 3 | RNVC: 2
44A9360: RNCC: 3 | RNVC: 2
44A9360: RNCC: 3 | RNVC: 2

5 Sep 1963

5340-20-007-0629
Mounting Bracket

200070629
1176869: RNCC: 1 | RNVC: 2
05294: RNCC: 3 | RNVC: 2
2037-786: RNCC: 5 | RNVC: 2

7 Aug 2012

5340-21-901-8669
Rigid Caster

219018669
TFH2OO2RTR: RNCC: 3 | RNVC: 2

19 Jun 1987

5340-20-004-5890
Mounting Bracket

200045890
300039-001: RNCC: 3 | RNVC: 2
300039: RNCC: 5 | RNVC: 1

19 Feb 2009

5340-20-005-1963
Access Cover

200051963
10663623-001: RNCC: 3 | RNVC: 2

3 Dec 2009

5340-21-898-4488
Padlock

218984488
4B72-K1: RNCC: 3 | RNVC: 1
4B-7T-72-K1: RNCC: 3 | RNVC: 2

2 Jul 1985

5340-21-908-5218
Turnbuckle Body

219085218
9277867-1: RNCC: 3 | RNVC: 2
LS00292-1: RNCC: 3 | RNVC: 2

25 Mar 1993

5340-20-002-3568
Dust And Moisture Seal Protective Cap

200023568
NW36007-1: RNCC: 3 | RNVC: 2

15 Nov 2005

5340-20-005-4413
Fuel Tank Guard

200054413
9480823-1: RNCC: 3 | RNVC: 2

13 Apr 2010

5340-20-001-7463
Manual Control Handle

200017463
10640418: RNCC: 3 | RNVC: 2

4 Dec 2004

5340-21-858-1459
Headless Straight Rod

218581459
36IN15BMF70-5: RNCC: 3 | RNVC: 2
15BMF70-36INITEM5: RNCC: 3 | RNVC: 2

13 Jan 1972

5340-20-000-3733
Mounting Bracket

200003733
10655741-011: RNCC: 3 | RNVC: 2

30 Aug 2002

5340-20-006-8054
Mounting Bracket

200068054
10688001-011PW: RNCC: 3 | RNVC: 2

23 Mar 2012

5340-20-000-9262
Mounting Bracket

200009262
10652958-011PEW: RNCC: 3 | RNVC: 2

6 Aug 2003

5340-21-905-5654
General Purpose Resilient Mount

219055654
MA197815: RNCC: 3 | RNVC: 2
MA197815-01: RNCC: 3 | RNVC: 2

9 Sep 1989

5340-21-882-8275
Rigid Caster

218828275
31-408TDR: RNCC: 3 | RNVC: 2

11 Jun 1980

5340-21-908-4143
Nonmetallic Bumper

219084143
CF807318A: RNCC: 3 | RNVC: 2
59.68.020.A: RNCC: 5 | RNVC: 2

29 May 1992

5340-20-005-5874
Mounting Bracket

200055874
IPL16021-01-02: RNCC: 3 | RNVC: 2

18 May 2010

5340-21-860-5042
Retaining Strap

218605042
191-937: RNCC: 3 | RNVC: 2

15 Oct 1970

5340-21-862-6236
Screw Thread Insert

218626236
TL1476: RNCC: 3 | RNVC: 2

16 Sep 1971

5340-21-913-6453
Door Handle

219136453
WW404495AR: RNCC: 3 | RNVC: 2

14 Dec 1996

5340-21-913-0734
Mounting Plate

219130734
9481463-100: RNCC: 3 | RNVC: 2

13 Mar 1996

5340-21-851-9748
Recess Handle

218519748
CH183: RNCC: 3 | RNVC: 2

22 Mar 1969

5340-20-005-3997
Mounting Plate

200053997
F1303-007400: RNCC: 3 | RNVC: 2

18 Mar 2010

5340-21-920-5514
Mounting Bracket

219205514
554-800014-000: RNCC: 3 | RNVC: 2
554-800014-000: RNCC: 5 | RNVC: 9

10 Mar 2000

5340-20-006-0282
Access Cover

200060282
85545081-103: RNCC: 3 | RNVC: 2

24 Dec 2010

5340-21-867-0014
General Purpose Resilient Mount

218670014
682694: RNCC: 3 | RNVC: 2

14 Jul 1972

5340-21-874-3881
Retaining Strap

218743881
T625: RNCC: 3 | RNVC: 2

13 Apr 1977

5340-21-901-8997
Nonmetallic Bumper

219018997
BS2552-00-00-066: RNCC: 3 | RNVC: 2

3 May 1988

5340-20-002-5015
Cover Plate

200025015
HA-7111: RNCC: 3 | RNVC: 2

8 Feb 2006

5340-20-005-5693
Mounting Bracket

200055693
AC40341-08: RNCC: 3 | RNVC: 2

13 May 2010

5340-21-893-8248
Right-Hand Tubing A

218938248
306746: RNCC: 3 | RNVC: 2

2 Oct 1983

5340-21-921-4679
Webbing Strap

219214679
0078458-4: RNCC: 3 | RNVC: 2

23 Nov 2001

5340-20-007-6141
Thumb Latch

200076141
8-240-SS R: RNCC: 3 | RNVC: 2

26 Apr 2013

5340-21-895-0626
Bow Handle

218950626
1427L8: RNCC: 3 | RNVC: 2

6 Mar 1984

5340-21-897-8282
Plug

218978282
056103117: RNCC: 3 | RNVC: 2
B056103117: RNCC: 5 | RNVC: 2

14 Dec 1984

5340-20-006-3823
Loop Clamp

200063823
83210052-005: RNCC: 3 | RNVC: 2

24 Jun 2011

5340-21-907-1116
Access Cover

219071116
CF 807 688 AE: RNCC: 3 | RNVC: 2

23 May 1990

5340-20-004-8746
Mounting Plate

200048746
10675638-011PEG: RNCC: 3 | RNVC: 2
10675638: RNCC: 5 | RNVC: 1

5 Jun 2009

5340-21-893-8167
Electrical-Mechanical Equipment Post

218938167
1576-M09-F09-6321-1032E: RNCC: 3 | RNVC: 2

10 Sep 1983

5340-20-006-1401
Mounting Bracket

200061401
0656-033422-03: RNCC: 3 | RNVC: 2
0656-033436-01: RNCC: D | RNVC: 9

1 Mar 2011

5340-21-853-8316
Webbing Strap

218538316
89C41826-15: RNCC: 3 | RNVC: 2

23 May 1969

5340-20-000-0430
Angle Bracket

200000430
AC19200-05: RNCC: 3 | RNVC: 2

16 Apr 2002

5340-20-004-6147
Quick Release Plunger

200046147
304534-701: RNCC: 3 | RNVC: 2
304534: RNCC: 5 | RNVC: 1

25 Feb 2009

5340-20-005-5979
Manual Control Lever

200055979
AC40382-02: RNCC: 3 | RNVC: 2

19 May 2010

5340-20-003-8225
Ring

200038225
6430-3011-00: RNCC: 3 | RNVC: 2

7 Jan 2008

5340-21-660-1050
Door Hook

216601050
NO PRIM REF: RNCC: 3 | RNVC: 2
21-660-1050: RNCC: 5 | RNVC: 2

5 Jun 1968

5340-20-001-5596
Access Cover

200015596
C50703-106-1: RNCC: 3 | RNVC: 2
C50703-106: RNCC: D | RNVC: 9

12 Aug 2004

5340-21-841-7625
Pipe Bracket

218417625
460-7208: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-109-0966
Hinged Hasp

211090966
1508804: RNCC: 3 | RNVC: 2
450KA-392: RNCC: 3 | RNVC: 2

4 Jun 1968

5340-21-100-5296
Pipe Bracket

211005296
41778: RNCC: 3 | RNVC: 2
1005296: RNCC: 6 | RNVC: 9

12 Nov 1970

5340-21-905-5161
Mounting Bracket

219055161
1-080-00369: RNCC: 3 | RNVC: 2

24 Aug 1988

5340-21-311-9550
Retaining Band

213119550
J800-26: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-003-9762
Mounting Plate

200039762
15003819: RNCC: 3 | RNVC: 2

20 Mar 2008

5340-20-003-2259
Angle Bracket

200032259
P2484: RNCC: 3 | RNVC: 2
P2784: RNCC: 5 | RNVC: 2

22 Feb 2007

5340-21-920-5236
Rh Bracket Hinge

219205236
10616711-02: RNCC: 3 | RNVC: 2

16 Feb 2000

5340-20-007-5899
Mounting Bracket

200075899
10707709-011PW: RNCC: 3 | RNVC: 2
10707709: RNCC: D | RNVC: 9

19 Apr 2013

5340-21-898-4293
Latch Stop

218984293
K110-602: RNCC: 3 | RNVC: 2

7 May 1985

5340-21-901-8990
Lock Bolt Receptacl

219018990
0524: RNCC: 3 | RNVC: 2

23 Apr 1988

5340-20-008-2157
Dust And Moisture Seal Protective Cap

200082157
NCLB 740-003.023: RNCC: 3 | RNVC: 2

8 Jan 2014

5340-20-007-3973
Mounting Bracket

200073973
0656-034500-01: RNCC: 3 | RNVC: 2

16 Jan 2013

5340-20-006-6129
Electronic Equipment Hardware Kit

200066129
1175029-1: RNCC: 3 | RNVC: 2

24 Nov 2011

5340-21-868-9119
Cable Clamp

218689119
8200000148: RNCC: 3 | RNVC: 2

16 Jan 1974

5340-21-920-0226
Retaining Strap

219200226
10608037: RNCC: 3 | RNVC: 2

10 Mar 1999

5340-21-660-1680
Expansion Shield

216601680
101-01034: RNCC: 3 | RNVC: 2
101-842: RNCC: 3 | RNVC: 2
842: RNCC: 3 | RNVC: 2
115-0712: RNCC: 6 | RNVC: 9
M30282: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-908-4858
Dust And Moisture Seal Protective Cap

219084858
434 174: RNCC: 3 | RNVC: 2

29 Oct 1992

5340-20-003-1752
Mortise Latch Set

200031752
10665094-011PG: RNCC: 3 | RNVC: 2
10665094-011: RNCC: 5 | RNVC: 1

24 Jan 2007

5340-21-819-2102

5340-20-007-0107
Angle Bracket

200070107
10690274-011PG: RNCC: 3 | RNVC: 2

9 Jul 2012

5340-21-914-6307
Double Angle Bracket

219146307
500-481-02: RNCC: 3 | RNVC: 2

16 Oct 1998

5340-20-006-3514
Catch Strike

200063514
AC86205-15: RNCC: 3 | RNVC: 2

15 Jun 2011

5340-20-000-5230
Mounting Plate

200005230
326250-25X11X2.5: RNCC: 3 | RNVC: 2

5 Dec 2002

5340-20-002-7177
Ne Bracket Isolator

200027177
717-674A: RNCC: 3 | RNVC: 2

25 May 2006

5340-20-002-8436
Access Cover

200028436
501-402-0042: RNCC: 3 | RNVC: 2

19 Jul 2006

5340-21-908-3625
Angle Bracket

219083625
S210A-HG: RNCC: 3 | RNVC: 2
10553277: RNCC: 5 | RNVC: 2

19 Dec 1991

5340-21-908-4550
Access Door

219084550
TE30003626-002: RNCC: 3 | RNVC: 2

31 Jul 1992

5340-20-007-6317
Mounting Bracket

200076317
83240010-101: RNCC: 3 | RNVC: 2
83240010: RNCC: D | RNVC: 9

6 May 2013

5340-21-660-0674
Rim Latch

216600674
210: RNCC: 3 | RNVC: 2
210J: RNCC: 3 | RNVC: 2
130-4501: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-908-0135
Manual Control Handle

219080135
27889: RNCC: 3 | RNVC: 2

13 Sep 1990

5340-21-877-3476
Expansion Plug

218773476
31509: RNCC: 3 | RNVC: 2

18 Oct 1977

5340-20-000-2527
Tapping. Pad

200002527
10603326: RNCC: 3 | RNVC: 2

27 Jun 2002

5340-21-841-7615
Screen And Storm Sash Hanger

218417615
525: RNCC: 3 | RNVC: 2
131-4301: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-000-5816
Loop Clamp

200005816
C-949: RNCC: 3 | RNVC: 2

21 Feb 2003

5340-21-860-5660

5340-21-860-6165

5340-20-000-2443
Double Angle Bracket

200002443
9379640-1: RNCC: 3 | RNVC: 2

25 Jun 2002

5340-21-911-1249
Mounting Plate

219111249
391-04277: RNCC: 3 | RNVC: 2
391-04277-00: RNCC: 3 | RNVC: 2
MPL-04277-00: RNCC: 5 | RNVC: 1

23 Nov 1993

5340-20-005-9973
Mounting Plate

200059973
85510031-103: RNCC: 3 | RNVC: 2

16 Dec 2010

5340-21-878-0293
Pipe Bracket

218780293
235 1-2: RNCC: 3 | RNVC: 2
FIG235 1-2: RNCC: 3 | RNVC: 2

24 Jan 1978

5340-21-901-8545
Dust And Moisture Seal Protective Plug

219018545
DDDS010589-1: RNCC: 3 | RNVC: 2
DDDS010589-1: RNCC: 5 | RNVC: 1

20 Feb 1987

5340-21-914-1554
Hand Crank Arm

219141554
258618-902: RNCC: 3 | RNVC: 2
258618-901: RNCC: 5 | RNVC: 9

6 May 1997

5340-20-003-1662
Mechanic Equipment Hardware Kit

200031662
60-100-60: RNCC: 3 | RNVC: 2

19 Jan 2007

5340-21-891-6555
Rim Clenching Clamp

218916555
51085-A1-30: RNCC: 3 | RNVC: 2

1 May 1983

5340-21-913-8786
Spacing Threaded Standoff

219138786
734-800286-000: RNCC: 3 | RNVC: 2

22 Mar 1997

5340-20-004-2316
Track Stop

200042316
10668625-001: RNCC: 3 | RNVC: 2

30 Jul 2008

5340-21-860-3918
Plain Solid Disk

218603918
255649: RNCC: 3 | RNVC: 2

15 Apr 1971

5340-21-870-9344
Retaining Strap

218709344
C83-1C3-46: RNCC: 2 | RNVC: 2
C3-46: RNCC: 3 | RNVC: 2

2 Sep 1975

5340-21-905-5083
Pawl Fastener

219055083
1230-1214-3000: RNCC: 3 | RNVC: 2
Y-477-KA: RNCC: 3 | RNVC: 2
8156058SH6: RNCC: 6 | RNVC: 9

9 Jul 1988

5340-21-891-5330
Swivel Caster

218915330
NO REF: RNCC: 3 | RNVC: 2

4 Dec 1982

5340-21-798-7563

5340-21-866-4183
Extension Drawer Slide

218664183
C300D22: RNCC: 3 | RNVC: 2

19 May 1972

5340-20-005-2912
Bolt Kit

200052912
0978321: RNCC: 3 | RNVC: 2

3 Feb 2010

5340-20-002-4277
Angle Bracket

200024277
130014DE359-1: RNCC: 3 | RNVC: 2
130014DE359: RNCC: D | RNVC: 9

22 Dec 2005

5340-21-891-5877
Mortise Lock Set

218915877
MS1870-312: RNCC: 3 | RNVC: 2

20 Feb 1983

5340-21-920-1116
Mounting Plate

219201116
10617295: RNCC: 3 | RNVC: 2

11 May 1999

5340-21-857-8650
Assembly Escutcheon

218578650
AD24489: RNCC: 3 | RNVC: 2

12 Mar 1970

5340-21-888-9487
Anode Assembly

218889487
36460-2L: RNCC: 3 | RNVC: 2

17 Apr 1982

5340-20-004-8897
Webbing Strap

200048897
10638454-35: RNCC: 3 | RNVC: 2
10638454: RNCC: 6 | RNVC: 9

10 Jun 2009

5340-20-003-5234
Mounting Bracket

200035234
10640168-PW: RNCC: 3 | RNVC: 2
10640168: RNCC: 5 | RNVC: 1

13 Aug 2007

5340-20-007-8368
Mounting Bracket

200078368
10686091-001PEG: RNCC: 3 | RNVC: 2
10686091: RNCC: D | RNVC: 9

20 Aug 2013

5340-21-879-5712
Clamp

218795712
601-228: RNCC: 3 | RNVC: 2
601228: RNCC: 5 | RNVC: 2

23 Jan 1979

5340-20-002-2776
Mounting Bracket

200022776
200-1379-101: RNCC: 3 | RNVC: 2
200-1379: RNCC: D | RNVC: 9

26 Sep 2005

5340-21-660-1181
Screw Hook

216601181
NO. 20: RNCC: 3 | RNVC: 2
131-8993: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-908-0994
Mounting Bracket

219080994
161 00 42 0008: RNCC: 3 | RNVC: 2

30 Aug 1991

5340-21-895-0213
Loop Clamp

218950213
120525: RNCC: 3 | RNVC: 2

23 Jan 1984

5340-20-000-5780
Rod Assembly

200005780
A20618-025-1: RNCC: 3 | RNVC: 2

18 Feb 2003

5340-20-001-3993
Access Cover

200013993
716132-003: RNCC: 3 | RNVC: 2
716132: RNCC: D | RNVC: 9

27 Apr 2004

5340-20-007-5890
Mounting Bracket

200075890
10706554-011PEW: RNCC: 3 | RNVC: 2
10706554: RNCC: D | RNVC: 9

18 Apr 2013

5340-21-911-1399
Cam Lock Bracket

219111399
8041-0: RNCC: 3 | RNVC: 2

10 Dec 1993

5340-21-905-3793
Access Cover

219053793
2-100120: RNCC: 3 | RNVC: 2

6 Aug 1988

5340-20-007-5871
Mounting Bracket

200075871
10706763-011PEW: RNCC: 3 | RNVC: 2
10706763: RNCC: D | RNVC: 9

18 Apr 2013

5340-20-006-9485
Synchro Clamp

200069485
10681485-011: RNCC: 3 | RNVC: 2
10681485: RNCC: D | RNVC: 9

12 Jun 2012

5340-21-908-0430
Retaining Strap

219080430
C107-A100-C88: RNCC: 3 | RNVC: 2

22 Dec 1990

5340-20-004-3897
Mounting Bracket

200043897
10674241-011PG: RNCC: 3 | RNVC: 2
10674241: RNCC: 5 | RNVC: 1

7 Nov 2008

5340-21-851-4146
Angle Bracket

218514146
S1228-11: RNCC: 3 | RNVC: 2

6 Oct 1968

5340-20-003-4061
Strap

200034061
2108-A26: RNCC: 3 | RNVC: 2

15 Jun 2007

5340-21-920-1005
Access Cover

219201005
10618463: RNCC: 3 | RNVC: 2

6 May 1999

5340-20-007-9203
Mounting Bracket

200079203
10689364-011PEW: RNCC: 3 | RNVC: 2
10689364: RNCC: D | RNVC: 9

16 Sep 2013

5340-21-914-1550
Access Cover

219141550
420-911-067: RNCC: 3 | RNVC: 2
F300 0T 019 4532: RNCC: 6 | RNVC: 9

1 May 1997

5340-21-892-4474
Filler Opening Cap

218924474
100121: RNCC: 3 | RNVC: 2

15 Oct 1983

5340-20-003-4649
Mounting Plate

200034649
10628480-PW: RNCC: 3 | RNVC: 2

17 Jul 2007

5340-21-897-8698
Rod End Clevis

218978698
C6ECM1096-27: RNCC: 3 | RNVC: 2

19 Feb 1985

5340-21-913-8807
Angle Bracket

219138807
215-95153-2: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-21-880-7863
Electrical-Mechanical Equipment Post

218807863
122871-1: RNCC: 3 | RNVC: 2

12 Mar 1980

5340-21-896-2213
Angle Bracket

218962213
C4W1757-13: RNCC: 3 | RNVC: 2

3 Jun 1984

5340-21-660-1663
Expansion Shield

216601663
38550: RNCC: 3 | RNVC: 2
1815-00200: RNCC: 3 | RNVC: 2
1815-2: RNCC: 3 | RNVC: 2
1818: RNCC: 3 | RNVC: 2
1815-00200: RNCC: 3 | RNVC: 2
1815-2: RNCC: 3 | RNVC: 2
1818: RNCC: 3 | RNVC: 2
1818: RNCC: 3 | RNVC: 2
115-0100: RNCC: 6 | RNVC: 9
115-0102: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-888-1419
Pcb Guide

218881419
512206-0220: RNCC: 3 | RNVC: 2

24 Jan 1982

5340-20-005-4779
Double Angle Bracket

200054779
770825: RNCC: 3 | RNVC: 2

22 Apr 2010

5340-21-868-8780
Barrel Bolt

218688780
SC1078C4: RNCC: 3 | RNVC: 1

18 Oct 1973

5340-21-908-0856
Flat Mounting Plate

219080856
10551290: RNCC: 3 | RNVC: 2

17 Aug 1991

5340-21-913-6460
Electrical-Mec Post

219136460
520-601116-000: RNCC: 3 | RNVC: 2

1 Jan 1997

5340-21-905-5547
Access Cover

219055547
CF222295A: RNCC: 3 | RNVC: 2

13 May 1989

5340-21-908-4010
Threaded Rod End

219084010
215-90402: RNCC: 3 | RNVC: 2

28 May 1992

5340-21-868-8557
Hinge-Half

218688557
C5WM126242-28: RNCC: 3 | RNVC: 2

18 Oct 1973

5340-20-001-2347
Strap Hinge Leaf

200012347
GS325-0037-4: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-21-884-0106
Angle Bracket

218840106
140750-002: RNCC: 3 | RNVC: 2

26 Nov 1980

5340-20-003-5054
Retainer

200035054
642-465487-000: RNCC: 3 | RNVC: 2

2 Aug 2007

5340-20-005-5987
Manual Control Lever

200055987
IPL64100-02-07: RNCC: 3 | RNVC: 2

19 May 2010

5340-21-874-8476
Webbing Strap

218748476
8482: RNCC: 3 | RNVC: 2

25 Aug 1976

5340-21-911-1326
Coat And Hat Hook

219111326
2460-84: RNCC: 3 | RNVC: 2

26 Nov 1993

5340-21-311-8690
Loop Clamp

213118690
A3046A5-92: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-890-4664
Screw Thread Insert

218904664
45003: RNCC: 3 | RNVC: 2

18 Oct 1982

5340-20-006-0015
Mounting Plate

200060015
542723-1: RNCC: 3 | RNVC: 2

17 Dec 2010

5340-21-879-6034
Electrical-Mechanical Equipment Post

218796034
708234-3: RNCC: 3 | RNVC: 2

15 May 1979

5340-21-660-0238
Butt Hinge

216600238
804: RNCC: 3 | RNVC: 1
804 3 X 3: RNCC: 3 | RNVC: 2
804-3 IN: RNCC: 3 | RNVC: 2
131-7855: RNCC: 6 | RNVC: 9
5340-4011: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-005-8573
Multiple Angle Bracket

200058573
0976224-1: RNCC: 3 | RNVC: 2

1 Oct 2010

5340-20-000-8433
Angle Bracket

200008433
9382512-1: RNCC: 3 | RNVC: 2
9382512: RNCC: D | RNVC: 9

17 Jun 2003

Load More Results