What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

Hardware, Commercial - Canada (CA)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Canada (CA) - NCB is 20 or 21

Page 44 of 64

NSN Format for Hardware, Commercial
Codified by Canada

53	40	21	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Canada (CA)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 190 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 63 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 26 Items
What is a Rod End Connector? 44 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 69 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 226 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 94 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 20 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 582 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 43 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 202 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 65 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Shelf Bracket? 33 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Door Hook And Eye? 22 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 77 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 12 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 23 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 23 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 44 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 13 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is a Friction Catch? 38 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 15 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 39 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 26 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 86 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 20 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 42 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 91 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 57 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 25 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 163 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 101 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 21 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 16 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 288 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 52 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 23 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 131 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 24 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 41 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 70 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 45 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 210 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 163 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 82 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 44 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 38 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 25 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 20 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 42 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 18 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Glazier Point? 10 Items: A Glazier Point (POINT,GLAZIER) is a piece of thin sheet metal, triangular or diamond shaped, designed to hold a pane of glass in a wooden sash.
What is an Angle Bracket? 1105 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 81 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 32 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1130 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 20 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 49 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 37 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Quick Release Plunger? 13 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 114 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flush Catch? 97 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 13 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 86 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 115 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 177 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 24 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 53 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 219 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 40 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 494 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 353 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 55 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 51 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 12 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 601 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 32 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 39 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 34 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 41 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 21 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping? 19 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 93 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 117 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 31 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 45 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 19 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 832 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 35 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 40 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 75 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 106 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Picture Hanger? 10 Items: A Picture Hanger (HANGER,PICTURE) is a hook like device that is secured to walls, bulkheads, columns and the like, by means of a nail, screw, magnet or adhesive backed cloth, that is included with and/or attached to the hook. It is designed to hold and suspend variuos items such as photographs, paintings, maps, documents, etc.
What is a Protection Bellows? 16 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 57 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 49 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 2535 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 19 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 16 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 1222 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 48 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 64 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Threaded Hinged Standoff? 11 Items: A Threaded Hinged Standoff (STANDOFF,HINGED,THREADED) is a standoff, internally and/or externally, threaded on both ends with a hinge or pivot point to allow for independent movement of the ends.
What is a Spacing Threaded Standoff? 178 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 115 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a Crank Handle? 13 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 29 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Mechanic Equipment Hardware Kit? 87 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Dust And Moisture Seal Protective Cover? 38 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 51 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 308 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 41 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 39 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 178 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 27 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 80 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 86 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 44 of 64

5340-21-660-0858
Glazier Point

216600858
00: RNCC: 3 | RNVC: 1
00: RNCC: 3 | RNVC: 2
160-6312: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-857-8273
Butt Hinge

218578273
490DB: RNCC: 3 | RNVC: 2

12 Feb 1970

5340-20-003-3215
Armou Adapter Plate

200033215
B30601-091-1: RNCC: 3 | RNVC: 2

25 Apr 2007

5340-20-007-9315
Door Holder

200079315
103275: RNCC: 3 | RNVC: 2

19 Sep 2013

5340-21-913-8850
Mounting Bracket

219138850
VD-96-00110-3: RNCC: 3 | RNVC: 2

13 Mar 1997

5340-21-914-8237
Mounting Plate

219148237
1205-1033-1: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-20-008-0435
Manual Control Handle

200080435
0656-036283-01: RNCC: 3 | RNVC: 2

23 Oct 2013

5340-20-003-5443
Hinge

200035443
10640059-PG: RNCC: 3 | RNVC: 2
10640059: RNCC: 5 | RNVC: 1

24 Aug 2007

5340-21-921-2929
Latch. Keeper

219212929
099-163: RNCC: 3 | RNVC: 2

31 Aug 2001

5340-20-002-6082
Dust And Moisture Seal Protective Cap

200026082
PK2056: RNCC: 3 | RNVC: 2

3 Apr 2006

5340-21-914-8654
Mounting Plate

219148654
10617225: RNCC: 3 | RNVC: 2

25 Aug 1998

5340-20-006-2202
Mounting Bracket

200062202
83220021-001: RNCC: 3 | RNVC: 2

5 Apr 2011

5340-21-859-7662
Anode Retaining Plug

218597662
MILA19521: RNCC: 2 | RNVC: 1
158-07527-000: RNCC: 3 | RNVC: 2
158-593: RNCC: 3 | RNVC: 2
700E7695-50: RNCC: 3 | RNVC: 2
280E04-00017-00-50: RNCC: 5 | RNVC: 2
280E04-00017-01-50: RNCC: 5 | RNVC: 2

15 Feb 1973

5340-20-003-1560
Angle Bracket

200031560
10665103-001PW: RNCC: 3 | RNVC: 2
10665103-001: RNCC: 5 | RNVC: 1

17 Jan 2007

5340-20-007-7250
Mounting Plate

200077250
10703774-001PW: RNCC: 3 | RNVC: 2
10703774: RNCC: D | RNVC: 9

25 Jun 2013

5340-20-007-8708
Mounting Plate

200078708
10705907-001: RNCC: 3 | RNVC: 2
10705907: RNCC: D | RNVC: 9

4 Sep 2013

5340-21-888-8356
Filing Cabinet Lock

218888356
166-10: RNCC: 3 | RNVC: 2

17 Apr 1982

5340-21-920-1254
Mounting Bracket

219201254
9228213: RNCC: 3 | RNVC: 2
9228213-1: RNCC: 5 | RNVC: 2

14 May 1999

5340-21-862-6126
Antipilferage Seal

218626126
TYDEN: RNCC: 3 | RNVC: 1
R1C: RNCC: 6 | RNVC: 9

15 Jul 1971

5340-21-884-0609
Retaining Clip

218840609
M4708-102: RNCC: 3 | RNVC: 2
56975-12-5-607M4708-102: RNCC: 5 | RNVC: 2

24 Feb 1981

5340-21-912-1057
Protection Bellows

219121057
9475496: RNCC: 1 | RNVC: 2

7 Sep 1994

5340-21-660-2397
Key Blank

216602397
108GMK: RNCC: 3 | RNVC: 2
998S: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-908-4114
Extension Drawer Slide

219084114
9160892-03: RNCC: 3 | RNVC: 2

7 May 1992

5340-21-814-8924

5340-21-814-7180

5340-20-000-4236
Dust And Moisture Seal Protective Plug

200004236
2529962: RNCC: 3 | RNVC: 2

25 Sep 2002

5340-20-006-8795
Bumper

200068795
100450000: RNCC: 3 | RNVC: 2

4 May 2012

5340-21-660-1344
Swivel Caster

216601344
5628: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-914-2759
Access Cover

219142759
WQ410092-T: RNCC: 3 | RNVC: 2
590.29.41.A: RNCC: 5 | RNVC: 2

12 Jul 1997

5340-21-908-4175
Access Cover

219084175
CF 807 309 BE: RNCC: 3 | RNVC: 2

6 Jun 1992

5340-21-001-3732
Corrosion Preventive Anode

210013732
5340STD137: RNCC: 3 | RNVC: 1
5340STD137PC1TYPEA: RNCC: 3 | RNVC: 1
5340STD137PC1TYPEAANDPC2ANDPC3: RNCC: 3 | RNVC: 2

25 May 1968

5340-21-862-6601
Mortise Lock Set

218626601
7342X1719X1121X75213: RNCC: 3 | RNVC: 1
2048-1-2X8254EX187ESX2D: RNCC: 3 | RNVC: 1
6745X2CYLX1683X562: RNCC: 3 | RNVC: 1
7750-1-4XD35X15XG522X2TM1133: RNCC: 3 | RNVC: 1
7342X1719X1121X75213: RNCC: 3 | RNVC: 1
132-3638: RNCC: 6 | RNVC: 9

14 Oct 1971

5340-20-001-0095
Access Cover

200010095
10658467-001PEW: RNCC: 3 | RNVC: 2

5 Sep 2003

5340-21-908-4783
Helical Compression Spring Retainer

219084783
324 273: RNCC: 3 | RNVC: 2

9 Oct 1992

5340-21-874-2824
Retaining Strap

218742824
C1033: RNCC: 3 | RNVC: 2

23 Dec 1976

5340-21-860-5219
Spring Tension Clip

218605219
191-941: RNCC: 3 | RNVC: 2

15 Oct 1970

5340-21-818-0589
Dust And Moisture Seal Protective Cap

218180589
AMCE8: RNCC: 3 | RNVC: 2

30 Sep 1964

5340-20-007-1359
Mounting Plate

200071359
TE10019193-001: RNCC: 3 | RNVC: 2

12 Sep 2012

5340-20-004-7460
Angle Bracket

200047460
MS9593-099: RNCC: 3 | RNVC: 2

16 Apr 2009

5340-21-807-0178

5340-21-817-8217

5340-21-844-4411

5340-20-004-6958
Adapter Plate Assem

200046958
B30601-900-1: RNCC: 3 | RNVC: 2
B30601-900: RNCC: 5 | RNVC: 1

23 Mar 2009

5340-20-007-5906
Access Cover

200075906
10700945-001PEW: RNCC: 3 | RNVC: 2
10700945: RNCC: 5 | RNVC: 2

19 Apr 2013

5340-20-004-9994
Mounting Bracket

200049994
10673765-011PW: RNCC: 3 | RNVC: 2
10673765: RNCC: D | RNVC: 9

4 Aug 2009

5340-20-001-7521
Mounting Bracket

200017521
TE10010172-002: RNCC: 3 | RNVC: 2
TE10010172: RNCC: D | RNVC: 9

7 Dec 2004

5340-21-909-0944
Dust And Moisture Seal Protective Cover

219090944
PK1843: RNCC: 3 | RNVC: 2

26 Jun 1992

5340-20-000-5441
Mounting Plate

200005441
1022-1498-01: RNCC: 3 | RNVC: 2

14 Jan 2003

200081338
10705671-001: RNCC: 3 | RNVC: 2
10705671: RNCC: D | RNVC: 9

25 Nov 2013

5340-21-920-9408
Mounting Plate

219209408
10638815-PW: RNCC: 3 | RNVC: 2

6 Dec 2000

5340-21-913-0097
Double Angle Bracket

219130097
9278737-1: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-21-877-3370
Door Holder

218773370
W20X: RNCC: 3 | RNVC: 2

18 Oct 1977

5340-21-660-0212
Butt Hinge

216600212
189: RNCC: 3 | RNVC: 1
189 3 X 3: RNCC: 3 | RNVC: 2
131-4600: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-004-6144
General Purpose Access Door

200046144
304885-701: RNCC: 3 | RNVC: 2
304885: RNCC: 5 | RNVC: 1

25 Feb 2009

5340-21-847-6208
Mirror Holder

218476208
462B: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-003-1747
Mounting Bracket

200031747
10663921-011PG: RNCC: 3 | RNVC: 2
10663921-011: RNCC: 5 | RNVC: 1

24 Jan 2007

5340-21-912-8446
Manual Control Handle

219128446
2090-0019: RNCC: 3 | RNVC: 2

2 Nov 1995

5340-21-908-0489
Door Handle

219080489
10500228: RNCC: 3 | RNVC: 2

11 Jan 1991

5340-20-007-6155
Mounting Bracket

200076155
1277119-1: RNCC: 3 | RNVC: 2
1277119: RNCC: D | RNVC: 9

26 Apr 2013

5340-20-000-3486
Angle Bracket

200003486
10656584-001PW: RNCC: 3 | RNVC: 2

21 Aug 2002

5340-20-002-2452
Webbing Strap

200022452
9279743-1: RNCC: 3 | RNVC: 2
9279743: RNCC: D | RNVC: 9

8 Sep 2005

5340-21-908-0208
Rh Assembly Catch

219080208
Y3513 172 4199: RNCC: 3 | RNVC: 2

4 Oct 1990

5340-21-914-8575
Cushioning Pad

219148575
10616986: RNCC: 3 | RNVC: 2

15 Jul 1998

5340-21-853-9574

5340-21-864-5722
Lifting Bar Ass Tab

218645722
89C41253-23: RNCC: 3 | RNVC: 2

15 Dec 1972

5340-21-102-7904
Bow Handle

211027904
3001205: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-001-1350
Mounting Plate

200011350
10639251-PEW: RNCC: 3 | RNVC: 2

20 Nov 2003

5340-20-000-4566
Mounting Bracket

200004566
10657124-011PEW: RNCC: 3 | RNVC: 2
10657124: RNCC: D | RNVC: 9

11 Oct 2002

5340-20-001-7698
Vertical Shock Pad

200017698
1201-312-1: RNCC: 3 | RNVC: 2
1284-1 ITEM 17: RNCC: 6 | RNVC: 9
1201-312: RNCC: D | RNVC: 9

16 Dec 2004

5340-20-000-2892
Mounting Bracket

200002892
10656404-011PG: RNCC: 3 | RNVC: 2

18 Jul 2002

5340-21-863-6445
Mounting Bracket

218636445
567-9396-001: RNCC: 3 | RNVC: 2

17 Mar 1972

5340-20-000-0741
Mounting Bracket

200000741
777-4518: RNCC: 3 | RNVC: 2

26 Apr 2002

5340-21-905-5670
Butt Hinge

219055670
838-007: RNCC: 3 | RNVC: 2

24 Aug 1989

5340-21-879-5251
Door Clos Front Rod

218795251
4020-48GTAN: RNCC: 3 | RNVC: 2

4 Jul 1978

5340-21-879-5457
Access Door

218795457
SMD435914: RNCC: 3 | RNVC: 2

17 Oct 1978

5340-21-860-5729
Coat And Hat Hook

218605729
892: RNCC: 3 | RNVC: 2

15 Oct 1970

5340-21-860-6979
Storm Sash Adjuster

218606979
WHITC012: RNCC: 3 | RNVC: 2

17 Dec 1970

5340-21-866-9550
Spring Tension Clip

218669550
310441: RNCC: 3 | RNVC: 2

14 Jul 1972

5340-21-876-2229
Hood Bracket

218762229
779017C1: RNCC: 3 | RNVC: 2

27 Sep 1977

5340-21-920-5276
Mounting Bracket

219205276
10616744: RNCC: 3 | RNVC: 2

21 Feb 2000

5340-21-911-9185
Electronic Equipment Hardware Kit

219119185
9375448: RNCC: 3 | RNVC: 2

22 Jul 1994

5340-21-849-6434

5340-21-868-9066
Caster Assembl Fork

218689066
102255: RNCC: 3 | RNVC: 2
5340-5195: RNCC: 6 | RNVC: 9

31 Dec 1973

5340-21-114-4958

5340-21-114-3922

5340-20-007-5767
Catch Strike

200075767
83260092-101: RNCC: 3 | RNVC: 2

11 Apr 2013

5340-20-003-4820
Mounting Plate

200034820
1118-034: RNCC: 3 | RNVC: 2

25 Jul 2007

5340-20-003-3019
Mounting Bracket

200033019
10638685-PW: RNCC: 3 | RNVC: 2

13 Apr 2007

5340-21-905-5914
Manual Control Handle

219055914
37204: RNCC: 3 | RNVC: 2

13 Mar 1990

5340-21-859-0710
Friction Catch

218590710
E9745: RNCC: 3 | RNVC: 2

14 May 1970

5340-20-003-1737
Handle

200031737
10668046-001PW: RNCC: 3 | RNVC: 2
10668046-001: RNCC: 5 | RNVC: 1

23 Jan 2007

5340-20-006-4213
Dust And Moisture Seal Protective Plug

200064213
KT10681021-011: RNCC: 3 | RNVC: 2

18 Jul 2011

5340-20-006-3747
Mounting Bracket

200063747
83210085-105: RNCC: 3 | RNVC: 2

22 Jun 2011

5340-21-882-8081
Butt Hinge

218828081
4381561090: RNCC: 3 | RNVC: 2

7 May 1980

5340-21-913-6490
Angle Bracket

219136490
9575838-1: RNCC: 3 | RNVC: 2

31 Jan 1997

5340-20-004-3843
Flush Catch

200043843
19-4973-51X: RNCC: 3 | RNVC: 2

4 Nov 2008

5340-20-004-6336
Cinch Strap

200046336
BB711: RNCC: 3 | RNVC: 2

3 Mar 2009

5340-20-006-1310
Mounting Plate

200061310
446-83042-1: RNCC: 3 | RNVC: 2

21 Feb 2011

5340-20-006-4614
Butt Hinge

200064614
HW20863: RNCC: 3 | RNVC: 2

11 Aug 2011

5340-21-913-2942
Mounting Plate

219132942
10558823: RNCC: 3 | RNVC: 2

19 Sep 1996

5340-20-000-0296
Angle Bracket

200000296
10638630-PW: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-21-915-0031
Strapping Seal

219150031
10638765: RNCC: 3 | RNVC: 2

26 Feb 1999

5340-21-919-0315
Webbing Strap

219190315
10638454-60: RNCC: 3 | RNVC: 2

7 Jul 1999

5340-21-921-3654
Mounting Bracket

219213654
10626799-PG: RNCC: 3 | RNVC: 2

19 Oct 2001

5340-20-010-5322

5340-20-000-9331
Access Cover

200009331
10652473-011PEG: RNCC: 3 | RNVC: 2

7 Aug 2003

5340-20-004-1537
Mounting Bracket

200041537
919254-101: RNCC: 3 | RNVC: 2

4 Jun 2008

5340-20-001-4008
Retaining Band

200014008
991.00.53.0054: RNCC: 3 | RNVC: 2
99100530054: RNCC: 5 | RNVC: 2

27 Apr 2004

5340-20-001-3033
Handle Kit

200013033
719345-901: RNCC: 3 | RNVC: 2

12 Mar 2004

5340-21-853-9705
Plug

218539705
PC10: RNCC: 3 | RNVC: 2

23 Jul 1969

5340-21-866-9234
Lockout

218669234
0G80: RNCC: 3 | RNVC: 2

14 Jul 1972

5340-21-901-8412
Loop Clamp

219018412
69130: RNCC: 3 | RNVC: 2

13 Jan 1987

5340-21-817-8231

5340-21-817-2013

5340-21-820-9519

5340-21-901-8663
Webbing Strap

219018663
40-2557-8: RNCC: 3 | RNVC: 2

19 Jun 1987

5340-20-004-4634
Mounting Bracket

200044634
B30801-046-1: RNCC: 3 | RNVC: 2
B30801-046: RNCC: 5 | RNVC: 1

22 Dec 2008

5340-21-805-4751
Buckle

218054751
ID54-113: RNCC: 3 | RNVC: 2

5 Sep 1963

5340-20-008-1654
Access Hole Frame

200081654
IN-2108: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-21-842-8775
Case Corner

218428775
S66: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-000-8483
Mounting Plate

200008483
10642736-PG: RNCC: 3 | RNVC: 2
10642736: RNCC: D | RNVC: 9

19 Jun 2003

5340-20-003-9863
Pan Lock Lever

200039863
8466-2007-00: RNCC: 3 | RNVC: 2

28 Mar 2008

5340-20-003-3106
Access Cover

200033106
A20616-066-1: RNCC: 3 | RNVC: 2
A20616-066-1: RNCC: 5 | RNVC: 2

19 Apr 2007

5340-20-007-8562
Retaining Strap

200078562
7007-1133-1: RNCC: 3 | RNVC: 2

27 Aug 2013

5340-20-003-7841
Angle Bracket

200037841
10667009-001PW: RNCC: 3 | RNVC: 2
10667009: RNCC: 5 | RNVC: 1

17 Dec 2007

5340-20-001-7008
Double Angle Bracket

200017008
715609-001: RNCC: 3 | RNVC: 2
715609: RNCC: D | RNVC: 9

5 Nov 2004

5340-21-921-6845
Butt Hinge

219216845
10656320-001PW: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-21-660-1040
Door Hook

216601040
974: RNCC: 3 | RNVC: 1
974-4: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-908-4412
Extension Drawer Slide Section

219084412
2351056: RNCC: 3 | RNVC: 2

2 Jul 1992

5340-21-910-8901
Friction Catch

219108901
87500205: RNCC: 3 | RNVC: 2
AN115SA: RNCC: 5 | RNVC: 2

31 Aug 1993

5340-20-007-0370
Mounting Bracket

200070370
0577016: RNCC: 3 | RNVC: 2

20 Jul 2012

5340-20-002-4239
Mounting Plate

200024239
3117195-01: RNCC: 3 | RNVC: 2

21 Dec 2005

5340-21-913-3476
Manual Control Lever

219133476
1117-115: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-21-868-9799

5340-20-000-4549
Webbing Strap

200004549
8603-4: RNCC: 3 | RNVC: 2
10552744-4: RNCC: 5 | RNVC: 2

10 Oct 2002

5340-20-001-7314
Nut And Bolt Retainer

200017314
BBD14085: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-20-000-0420
Angle Bracket

200000420
10617446-PEW: RNCC: 3 | RNVC: 2

16 Apr 2002

5340-21-913-3009
Spacing Threaded Standoff

219133009
10558199: RNCC: 3 | RNVC: 2

3 Nov 1996

5340-21-913-3446
Access Cover

219133446
10555359: RNCC: 3 | RNVC: 2

6 Sep 1996

5340-21-921-3803
Section Block Clamp

219213803
10639678-PG: RNCC: 3 | RNVC: 2

25 Oct 2001

5340-21-921-7324
Mounting Bracket

219217324
10626391-PW: RNCC: 3 | RNVC: 2

4 Mar 2002

5340-21-913-3010
Synchro Clamp

219133010
6279218: RNCC: 3 | RNVC: 2

7 Nov 1996

5340-21-913-3410
Mounting Bracket

219133410
6246411: RNCC: 3 | RNVC: 2

22 Feb 1997

5340-21-913-3482
Angle Bracket

219133482
10556730: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-21-913-6482
Mounting Bracket

219136482
10558002: RNCC: 3 | RNVC: 2

22 Jan 1997

5340-21-921-7108
Mounting Bracket

219217108
10626910-PW: RNCC: 3 | RNVC: 2

26 Feb 2002

5340-21-913-8837
Mounting Plate

219138837
10558076: RNCC: 3 | RNVC: 2

2 Apr 1997

5340-21-920-3170
Double Angle Bracket

219203170
10555989-PG: RNCC: 3 | RNVC: 2

10 Sep 1999

5340-20-002-4142
Ground Bracket

200024142
130014DE734-2: RNCC: 3 | RNVC: 2
130014DE734: RNCC: D | RNVC: 9

16 Dec 2005

5340-21-002-2696
Corr Anode Assembly

210022696
RC29500A7ITEM4: RNCC: 3 | RNVC: 1
1451-2154: RNCC: 3 | RNVC: 1

6 Jun 1968

5340-21-890-4652
Spring Tension Clip

218904652
2: RNCC: 3 | RNVC: 2

18 Oct 1982

5340-20-007-0841
Mounting Bracket

200070841
42325: RNCC: 3 | RNVC: 2

15 Aug 2012

5340-21-897-8560
Cylinder Plug

218978560
33-406C: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-21-911-1367
Butt Hinge Leaf

219111367
9377442-2: RNCC: 3 | RNVC: 2

15 Jan 1994

5340-20-003-2252
Crank Handle

200032252
SK499: RNCC: 3 | RNVC: 2

22 Feb 2007

5340-20-001-9254
Mounting Plate

200019254
0275752-1: RNCC: 3 | RNVC: 2
0275752: RNCC: D | RNVC: 9

4 Mar 2005

5340-21-913-4402
Ring

219134402
10617867: RNCC: 3 | RNVC: 2

15 May 1998

5340-21-921-0295
Mounting Bracket

219210295
10597361: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-21-921-0476
Leakproof Seal Plug

219210476
211949B: RNCC: 3 | RNVC: 2

28 Feb 2001

5340-20-012-2614

5340-20-010-8011

5340-20-010-9776

5340-21-886-2205
Electrical-Mechanical Equipment Post

218862205
36671: RNCC: 3 | RNVC: 2

7 Jul 1981

5340-21-855-1401
Resilient Mount

218551401
S4S25: RNCC: 3 | RNVC: 2

23 Jul 1969

5340-20-000-9409
Mounting Bracket

200009409
10654997-011PEW: RNCC: 3 | RNVC: 2

8 Aug 2003

5340-21-874-3792
Mast Antenna Clamp

218743792
694-180674: RNCC: 3 | RNVC: 2

22 Mar 1977

5340-21-901-8804
Lock-Cam

219018804
N2510DC: RNCC: 3 | RNVC: 2

4 Jan 1988

5340-21-879-6183
Butt Hinge

218796183
161ZP: RNCC: 3 | RNVC: 2

29 May 1979

5340-21-912-6711
Angle Bracket

219126711
WW 314 214 CR: RNCC: 3 | RNVC: 2

2 Aug 1995

5340-21-895-0212

5340-21-921-2571
Strap Hinge

219212571
0078328-1: RNCC: 3 | RNVC: 2

1 Aug 2001

5340-21-857-5977

5340-21-882-8770
Angle Bracket

218828770
AP695021B: RNCC: 3 | RNVC: 2

17 Sep 1980

5340-21-660-1025
Doorstop

216601025
4536: RNCC: 3 | RNVC: 2
133-7511: RNCC: 6 | RNVC: 9

25 May 1968

5340-20-005-5850
Mounting Bracket

200055850
AC40316-07: RNCC: 3 | RNVC: 2

18 May 2010

5340-21-908-0973
Angle Bracket

219080973
161.97.44.0065: RNCC: 3 | RNVC: 2

23 Aug 1991

5340-21-910-8749
Mounting Plate

219108749
TE10003947-002: RNCC: 3 | RNVC: 2

25 Jun 1993

5340-21-807-2532
Rim Latch Set

218072532
GS17-300: RNCC: 3 | RNVC: 2

27 Oct 1964

5340-21-884-0749
Electrical-Mechanical Equipment Post

218840749
1387143-000: RNCC: 3 | RNVC: 2

14 Apr 1981

5340-21-102-7072
Nonmetallic Bumper

211027072
2-1-2CB: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-862-6169
Expansion Shield

218626169
251-07842: RNCC: 3 | RNVC: 2
251-2612: RNCC: 3 | RNVC: 2
2612: RNCC: 3 | RNVC: 2

19 Aug 1971

5340-20-008-0124
Electronic Equipment Hardware Kit

200080124
218081-001: RNCC: 3 | RNVC: 2

16 Oct 2013

5340-20-002-0993
Access Cover

200020993
GC429-0010-1: RNCC: 3 | RNVC: 2

1 Jun 2005

5340-20-002-4352
Butt Hinge

200024352
10628165-PW: RNCC: 3 | RNVC: 2
10628165: RNCC: D | RNVC: 9

5 Jan 2006

5340-21-660-1380
Rope Cleat

216601380
737: RNCC: 3 | RNVC: 1
4015S-4 1/2: RNCC: 3 | RNVC: 2
185-3315: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-895-9916
Mounting Plate

218959916
CP14650-2: RNCC: 3 | RNVC: 2

12 Aug 1984

5340-21-866-9139
Butt Hinge

218669139
1041P: RNCC: 3 | RNVC: 2

16 Jun 1972

5340-21-112-7885

5340-21-801-3242

5340-21-800-5178

5340-20-004-8811
Mounting Plate

200048811
0669-765364-10: RNCC: 3 | RNVC: 2

8 Jun 2009

5340-20-001-8059
Access Cover

200018059
B40603-024-1: RNCC: 3 | RNVC: 2
B40603-024: RNCC: D | RNVC: 9

5 Jan 2005

5340-20-007-7065
Mounting Plate

200077065
719065-001: RNCC: 3 | RNVC: 2

13 Jun 2013

5340-20-005-6244
Cover Front Sight

200056244
TE20018404-100: RNCC: 3 | RNVC: 2

27 May 2010

5340-21-891-1512
Angle Bracket

218911512
8280526: RNCC: 3 | RNVC: 2
16009003600: RNCC: 5 | RNVC: 2

7 Nov 1982

5340-20-002-8103
Plastic Door Latch

200028103
0476474: RNCC: 3 | RNVC: 2
007438: RNCC: 5 | RNVC: 2

28 Jun 2006

5340-21-106-6981
Webbing Strap

211066981
3000411: RNCC: 3 | RNVC: 2
3001494: RNCC: 5 | RNVC: 1

6 Jun 1968

5340-20-001-5035
Access Cover

200015035
GD421-7808-3: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-20-001-8123
Mounting Bracket

200018123
C50703-153-1: RNCC: 3 | RNVC: 2
C50703-153: RNCC: D | RNVC: 9

6 Jan 2005

5340-21-116-1432

5340-21-111-4232

5340-21-111-0178

5340-21-908-0546
Access Door

219080546
10552820: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-20-006-3458
Mounting Bracket

200063458
83210042-103: RNCC: 3 | RNVC: 2

14 Jun 2011

5340-20-003-4843
Webbing Strap

200034843
10666096-002: RNCC: 3 | RNVC: 2
10666096: RNCC: 5 | RNVC: 1

26 Jul 2007

5340-20-006-5309
Catch Strike

200065309
85312502-004: RNCC: 3 | RNVC: 2

6 Oct 2011

5340-21-660-1346

5340-20-006-3085
Webbing Strap

200063085
1003356: RNCC: 3 | RNVC: 2
1003356: RNCC: 3 | RNVC: 9

20 May 2011

5340-21-868-9842
Padlock

218689842
517MK: RNCC: 3 | RNVC: 2
5340-5381: RNCC: 6 | RNVC: 9

11 Dec 1974

5340-21-103-6474
Loop Clamp

211036474
7190951: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-007-9212
Mounting Bracket

200079212
10687381-001PG: RNCC: 3 | RNVC: 2
10687381: RNCC: D | RNVC: 9

16 Sep 2013

5340-20-001-3554
Bracket Assembly

200013554
10657111-011: RNCC: 3 | RNVC: 2
10657111: RNCC: D | RNVC: 9

27 Mar 2004

5340-21-818-8582
Spring Tension Clip

218188582
42P209158: RNCC: 3 | RNVC: 2

21 Jan 1965

5340-20-003-0794
Latch Cam

200030794
C91001-243-1: RNCC: 3 | RNVC: 2

7 Dec 2006

5340-21-874-8484
Webbing Strap

218748484
8411: RNCC: 3 | RNVC: 2

25 Aug 1976

5340-21-896-9960

5340-21-888-1622

5340-20-004-9984
Mounting Bracket

200049984
10669218-011PW: RNCC: 3 | RNVC: 2
10669218: RNCC: D | RNVC: 9

4 Aug 2009

5340-20-007-2580
General Purpose Resilient Mount

200072580
SHOXS-0846: RNCC: 3 | RNVC: 2

14 Nov 2012

5340-21-914-8078
Mechanical Stop

219148078
1205-1012-1: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-20-002-5832
Band Assembly Stbd

200025832
7402-021-1: RNCC: 3 | RNVC: 2

20 Mar 2006

5340-21-868-9449
Butt Hinge

218689449
804BP: RNCC: 3 | RNVC: 1
804BP3X3: RNCC: 3 | RNVC: 2

31 Jul 1974

5340-21-660-0843
Hook Handle

216600843
486: RNCC: 3 | RNVC: 1
486C4: RNCC: 3 | RNVC: 2
132-2820: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-113-2769

5340-20-007-6019
Mounting Bracket

200076019
10705291-011PW: RNCC: 3 | RNVC: 2
10705291: RNCC: D | RNVC: 9

23 Apr 2013

5340-21-921-4163
Webbing Strap

219214163
861000-112-1: RNCC: 3 | RNVC: 2

6 Nov 2001

5340-20-005-8815
Turnbuckle

200058815
1079918-1: RNCC: 3 | RNVC: 2

21 Oct 2010

5340-21-660-1699
Expansion Shield

216601699
8035: RNCC: 3 | RNVC: 2
8035-3: RNCC: 3 | RNVC: 2
8035-00300: RNCC: 3 | RNVC: 2
8035-00300: RNCC: 3 | RNVC: 2
EX-8035-3: RNCC: 5 | RNVC: 2

6 Jun 1968

5340-21-901-8758
Key Blank

219018758
41N: RNCC: 3 | RNVC: 2

18 Nov 1987

5340-21-893-8481
Angle Bracket

218938481
154626-901: RNCC: 3 | RNVC: 2

15 Oct 1983

5340-20-006-7954
Dust And Moisture Seal Protective Cap

200067954
AC86105-07-002: RNCC: 3 | RNVC: 2

19 Mar 2012

5340-20-002-4367
Angle Bracket

200024367
10664109-011PW: RNCC: 3 | RNVC: 2
10664109: RNCC: D | RNVC: 9

5 Jan 2006

5340-21-908-4131
Adjusting Block

219084131
703-636500-901-0: RNCC: 3 | RNVC: 2

19 Jun 1992

5340-21-920-9285
Shield.

219209285
10642421: RNCC: 3 | RNVC: 2

27 Nov 2000

5340-21-879-0860
Mounting Plate

218790860
IR88973M: RNCC: 3 | RNVC: 2
M2600205: RNCC: 3 | RNVC: 2
2402-6002.05: RNCC: 5 | RNVC: 2

2 May 1978

5340-20-003-0524
Lowe Panel Assembly

200030524
C91001-145-1: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-21-908-4949
Rod End Clevis

219084949
8778172: RNCC: 3 | RNVC: 2

17 Dec 1992

5340-21-920-6624
Dust And Moisture Seal Protective Plug

219206624
PTP 3: RNCC: 3 | RNVC: 2
PTP 3: RNCC: 5 | RNVC: 2

18 May 2000

5340-21-905-5201
Mounting Bracket

219055201
8190350-1: RNCC: 3 | RNVC: 2

16 Oct 1988

5340-20-000-3433
Mounting Plate

200003433
9380452-3: RNCC: 3 | RNVC: 2

19 Aug 2002

5340-21-914-2148
Mounting Plate

219142148
VD9600170-1: RNCC: 3 | RNVC: 2

10 Jul 1997

5340-21-878-0745
Tee Hinge

218780745
1908US2C12IN: RNCC: 3 | RNVC: 2
1908US2C12IN: RNCC: 3 | RNVC: 2

7 Mar 1978

5340-21-876-5182
Webbing Strap

218765182
DDDS009589: RNCC: 3 | RNVC: 2

21 Jun 1977

5340-21-877-3475
Expansion Plug

218773475
31513: RNCC: 3 | RNVC: 2

18 Oct 1977

5340-21-859-1815
Corner Brace

218591815
1423B: RNCC: 3 | RNVC: 2

18 Jun 1970

5340-21-914-8576
Handle

219148576
10608544: RNCC: 3 | RNVC: 2

15 Jul 1998

5340-20-004-0737
Webbing Strap

200040737
10638456-40: RNCC: 3 | RNVC: 2

1 May 2008

5340-21-874-3834
Rubber Bumper

218743834
10-13PB: RNCC: 3 | RNVC: 2

22 Mar 1977

5340-20-005-8081
Multiple Angle Bracket

200058081
542532: RNCC: 3 | RNVC: 2

24 Aug 2010

5340-21-863-3514
Loop Clamp

218633514
190-0258: RNCC: 3 | RNVC: 2

18 Nov 1971

5340-21-911-1506
Nonmetallic Bumper

219111506
SJ-5008 021200 184321: RNCC: 3 | RNVC: 2

10 Mar 1994

5340-20-003-2165
Mounting Plate

200032165
B30601-030-1: RNCC: 3 | RNVC: 2

19 Feb 2007

5340-20-007-6535
Mounting Plate

200076535
0875232-2: RNCC: 3 | RNVC: 2

15 May 2013

5340-21-891-6287
Furniture Glide

218916287
250 3/4: RNCC: 3 | RNVC: 2
315-468: RNCC: 5 | RNVC: 2

27 Mar 1983

5340-20-007-6538
Mounting Plate

200076538
0875228-1: RNCC: 3 | RNVC: 2

15 May 2013

5340-21-891-6358
Spring Tension Clip

218916358
K-20: RNCC: 3 | RNVC: 2

2 Apr 1983

5340-21-847-0744
Rod End Clevis

218470744
1096677-23: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-908-5198
Rod End Connector

219085198
RS 412 091: RNCC: 3 | RNVC: 2

19 Mar 1993

5340-21-908-3351
Rim Clenching Clamp

219083351
1349040: RNCC: 3 | RNVC: 2

11 Oct 1991

5340-21-862-5654
Dust And Moisture Seal Protective Cap

218625654
C20: RNCC: 3 | RNVC: 2

17 Jun 1971

5340-21-660-1349
Swivel Caster

216601349
112: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-908-0193
Retaining Strap

219080193
W3513 132 5721: RNCC: 3 | RNVC: 2

4 Oct 1990

5340-21-908-4106
General Purpose Resilient Mount

219084106
8477487: RNCC: 3 | RNVC: 2

8 May 1992

5340-21-901-8837
Helical Compression Spring Retainer

219018837
WW414039A: RNCC: 3 | RNVC: 2
WW414039B: RNCC: 3 | RNVC: 2

27 Jan 1988

5340-20-003-7555
Shelf Interface

200037555
542021-1: RNCC: 3 | RNVC: 2
542021: RNCC: 5 | RNVC: 1

29 Nov 2007

5340-20-000-9256
Double Angle Bracket

200009256
10640416-PEW: RNCC: 3 | RNVC: 2

5 Aug 2003

5340-21-812-5677
Clamp

218125677
926X26: RNCC: 3 | RNVC: 2

1 May 1964

5340-21-846-1549
Key Blank

218461549
F145: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-908-5256
Mechanic Equipment Hardware Kit

219085256
28449M: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-21-860-6977
Door Closer

218606977
625: RNCC: 3 | RNVC: 2

17 Dec 1970

5340-21-897-8285
Angle Bracket

218978285
8477837-1: RNCC: 3 | RNVC: 2
1578477837-1: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-21-914-8613
Rod End Connector

219148613
1237-213-1: RNCC: 3 | RNVC: 2

30 Jul 1998

5340-21-841-7621
Expansion Shield

218417621
2715-00300: RNCC: 3 | RNVC: 2
6745 1/4L: RNCC: 3 | RNVC: 2
2715-3: RNCC: 5 | RNVC: 2

6 Jun 1968

5340-20-000-2380
Mounting Bracket

200002380
9379216-1: RNCC: 3 | RNVC: 2

20 Jun 2002

5340-21-805-4373
Dust And Moisture Seal Protective Cap

218054373
BK20054: RNCC: 3 | RNVC: 2

1 Dec 1968

5340-21-868-9668
Pipe Bracket

218689668
97: RNCC: 3 | RNVC: 1

22 Oct 1974

5340-20-006-4900
Access Cover

200064900
10681606-011PEG: RNCC: 3 | RNVC: 2

6 Sep 2011

5340-20-005-1958
Access Cover

200051958
10675394-011PEG: RNCC: 3 | RNVC: 2

3 Dec 2009

5340-21-814-6247
Steel Hook Ferrule

218146247
AGS897F: RNCC: 3 | RNVC: 2
28H5458: RNCC: 6 | RNVC: 9

16 Jun 1972

5340-21-841-6015
Angle Bracket

218416015
2000T04P02: RNCC: 3 | RNVC: 2

27 Aug 1969

5340-21-660-1934
Turnbuckle

216601934
9900SHB539: RNCC: 3 | RNVC: 2

30 Nov 1965

5340-21-901-8233
Spring Tension Clip

219018233
156C005030: RNCC: 3 | RNVC: 2

17 Jul 1986

5340-21-806-3237
Shockmount Pad

218063237
238B497G02: RNCC: 3 | RNVC: 2

5 Sep 1963

5340-21-882-8274
Swivel Caster

218828274
31-408TD: RNCC: 3 | RNVC: 2

11 Jun 1980

5340-21-898-4094

5340-20-000-3816
Mounting Bracket

200003816
9379710-2: RNCC: 3 | RNVC: 2

5 Sep 2002

5340-21-896-2690
Rod End Clevis

218962690
924420-1: RNCC: 3 | RNVC: 2

12 Aug 1984

5340-21-921-3863
Reinforcement Bar

219213863
9379202-1: RNCC: 3 | RNVC: 2

26 Oct 2001

5340-21-891-6200
Pivot Hinge

218916200
0P-109JRH: RNCC: 3 | RNVC: 2

21 Mar 1983

5340-21-905-5548
Mount

219055548
CF 222 354A: RNCC: 3 | RNVC: 2

13 May 1989

5340-21-905-5287
Angle Bracket

219055287
WL421111: RNCC: 3 | RNVC: 2

20 Nov 1988

5340-21-888-7813
Swivel Caster

218887813
4015ADIR: RNCC: 3 | RNVC: 2

27 Mar 1982

5340-20-000-4307
Mounting Plate

200004307
10652304-011PW: RNCC: 3 | RNVC: 2
10652304: RNCC: D | RNVC: 9

27 Sep 2002

5340-21-912-8455
Hand Crank

219128455
CM 95096: RNCC: 3 | RNVC: 2

17 Nov 1995

5340-21-840-9308

5340-21-841-0027

5340-21-891-5903
Hub Lever

218915903
K510-116: RNCC: 3 | RNVC: 2
K510-116: RNCC: 3 | RNVC: 2

20 Feb 1983

5340-20-003-4028
Bow Handle

200034028
2108-A05: RNCC: 3 | RNVC: 2

14 Jun 2007

5340-20-000-3328
Reinforcing Plate

200003328
9380497-1: RNCC: 3 | RNVC: 2

8 Aug 2002

5340-21-891-5758
Expansion Shield

218915758
S-14: RNCC: 3 | RNVC: 2

12 Feb 1983

5340-21-893-7874
Pawl Cover

218937874
8279749-1: RNCC: 3 | RNVC: 2

1 Aug 1983

5340-21-900-1586
Wheel Assembly

219001586
SK340: RNCC: 3 | RNVC: 2
C-30-R: RNCC: 5 | RNVC: 1

28 Feb 1986

5340-20-007-9777
Mounting Bracket

200079777
0875225-1: RNCC: 3 | RNVC: 2

3 Oct 2013

5340-20-003-8193
Dust And Moisture Seal Protective Cover

200038193
3002786: RNCC: 3 | RNVC: 2

4 Jan 2008

5340-21-920-1726
Dust And Moisture Seal Protective Cap

219201726
PK1846: RNCC: 3 | RNVC: 2

7 Jun 1999

5340-21-891-5889
Bottom Pin

218915889
34-301: RNCC: 3 | RNVC: 2
34-301: RNCC: 5 | RNVC: 2

20 Feb 1983

5340-21-914-3570
Dust And Moisture Seal Protective Plug

219143570
10617757: RNCC: 3 | RNVC: 2

10 Mar 1999

5340-20-004-0223
Spring Holder

200040223
GM3-M1140A: RNCC: 3 | RNVC: 2
042-385149: RNCC: D | RNVC: 9

8 Apr 2008

5340-21-893-7810

5340-21-905-5681
Spring Tension Clip

219055681
8777822: RNCC: 3 | RNVC: 2
8777822: RNCC: 5 | RNVC: 2

30 Aug 1989

5340-21-911-8301
Mechanic Equipment Hardware Kit

219118301
1091-6567-01: RNCC: 3 | RNVC: 2

21 Apr 1994

5340-20-006-9511
General Purpose Resilient Mount

200069511
38561: RNCC: 3 | RNVC: 2

12 Jun 2012

5340-20-004-5287
Slat

200045287
1237-192-7: RNCC: 3 | RNVC: 2

2 Feb 2009

5340-21-921-3856
Mounting Bracket

219213856
9379149-1: RNCC: 3 | RNVC: 2

26 Oct 2001

5340-21-660-0229
Butt Hinge

216600229
175: RNCC: 3 | RNVC: 1
175 4 1/2 X 4 1/2: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-908-3631
Angle Bracket

219083631
100735-1: RNCC: 3 | RNVC: 2

21 Dec 1991

5340-21-820-0535
Angle Bracket

218200535
S1228-9: RNCC: 3 | RNVC: 2

25 Feb 1965

5340-21-882-8785
Swivel Caster

218828785
NAS1349C35FD: RNCC: 3 | RNVC: 2

10 Sep 1980

5340-21-908-0943
Mounting Bracket

219080943
99100590034: RNCC: 3 | RNVC: 2

15 Aug 1991

5340-21-876-8550
Rod End Clevis

218768550
A11755: RNCC: 3 | RNVC: 2

4 Oct 1977

5340-20-003-5631
Mounting Plate

200035631
10664612-001PW: RNCC: 3 | RNVC: 2
10664612: RNCC: 5 | RNVC: 1

6 Sep 2007

5340-21-877-3456
Expansion Plug

218773456
31574: RNCC: 3 | RNVC: 2

18 Oct 1977

5340-21-846-8438
Buckle

218468438
A1225: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-008-0079
Mounting Bracket

200080079
10658784: RNCC: 3 | RNVC: 2

15 Oct 2013

5340-21-866-9953
Expansion Shield

218669953
3440: RNCC: 3 | RNVC: 2
38525: RNCC: 3 | RNVC: 2
WEJIT: RNCC: 5 | RNVC: 1

20 Oct 1972

5340-21-859-1473
Loop Clamp

218591473
14-197: RNCC: 3 | RNVC: 1

18 Jun 1970

5340-21-905-5417

5340-21-902-7267

5340-21-870-9152
Electrical-Mechanical Equipment Post

218709152
617-8803-001: RNCC: 3 | RNVC: 2

20 May 1975

5340-20-002-8862
Cover

200028862
C4B1024-39: RNCC: 3 | RNVC: 2

14 Aug 2006

5340-20-008-0369
Mounting Plate

200080369
10685062-001PEG: RNCC: 3 | RNVC: 2
10685062: RNCC: D | RNVC: 9

21 Oct 2013

5340-20-005-9828
Multiple Angle Bracket

200059828
82521071-005: RNCC: 3 | RNVC: 2

13 Dec 2010

5340-20-006-4891
Double Angle Bracket

200064891
10685334-001PEW: RNCC: 3 | RNVC: 2

6 Sep 2011

5340-21-891-5226
Hinge

218915226
22ST 1010-14IN: RNCC: 3 | RNVC: 2

4 Dec 1982

5340-21-905-5066
Door Glide

219055066
CPF-500-19: RNCC: 3 | RNVC: 2

24 Jun 1988

5340-21-908-4707
Block Clamp

219084707
CF 819 200 A: RNCC: 3 | RNVC: 2

11 Sep 1992

5340-21-908-0254
Rod End Clevis

219080254
06333177: RNCC: 3 | RNVC: 2

26 Oct 1990

5340-21-877-3442
Lock

218773442
8501: RNCC: 3 | RNVC: 2

18 Oct 1977

5340-21-920-1231
B Retainer Assembly

219201231
9376345-1: RNCC: 3 | RNVC: 2

14 May 1999

5340-21-912-1026
Multiple Eye Pad

219121026
9279666-1: RNCC: 3 | RNVC: 2

17 Aug 1994

5340-21-913-2975
Webbing Strap

219132975
9578175-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-20-002-4546
Mounting Bracket

200024546
130014DE209-1: RNCC: 3 | RNVC: 2

11 Jan 2006

5340-21-920-0425
Nonmetallic Bumper

219200425
10616633-1: RNCC: 3 | RNVC: 2

20 Mar 1999

5340-21-908-0827
Extension Drawer Slide Section

219080827
8860823-1: RNCC: 3 | RNVC: 2

8 Jun 1991

5340-21-886-2210
Electrical-Mechanical Equipment Post

218862210
36673-3: RNCC: 3 | RNVC: 2

7 Jul 1981

5340-21-914-2761
Angle Bracket

219142761
WW358321: RNCC: 3 | RNVC: 2
59.32.060.A: RNCC: 5 | RNVC: 2

16 Jul 1997

5340-20-003-3337
Mounting Plate

200033337
5309341SP: RNCC: 3 | RNVC: 1
5309341-1: RNCC: 3 | RNVC: 2
5309341COM: RNCC: 3 | RNVC: 2

2 May 2007

Load More Results