Hardware, Commercial - Canada (CA)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Canada (CA) - NCB is 20 or 21

Page 39 of 64

NSN Format for Hardware, Commercial
Codified by Canada

534021XXXXXXX
Group
FSG
ClassNCBIdentifier
FSC
Federal Supply Class
NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Canada (CA)
FSC 5340 Hardware, Commercial - Canada (CA)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340 Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?
FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?
NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?
FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?
NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340 Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 190 Items
A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 63 Items
A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 26 Items
What is a Rod End Connector? 44 Items
A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 69 Items
A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 226 Items
A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 94 Items
An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 20 Items
A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 582 Items
A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 43 Items
A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 202 Items
A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 65 Items
A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Shelf Bracket? 33 Items
A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items
A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Door Hook And Eye? 22 Items
A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 77 Items
A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 12 Items
A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 23 Items
A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 23 Items
A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 44 Items
A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 13 Items
A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is a Friction Catch? 38 Items
A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 15 Items
A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 39 Items
A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 26 Items
A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 86 Items
A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 20 Items
A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 42 Items
A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 91 Items
A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 57 Items
A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items
A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 25 Items
A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 163 Items
A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 101 Items
A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 21 Items
A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 16 Items
A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items
A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 288 Items
An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 52 Items
A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 23 Items
A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 131 Items
A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 24 Items
A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 41 Items
A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 70 Items
A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 45 Items
A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 210 Items
A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 163 Items
A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 82 Items
A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 44 Items
A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 38 Items
A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 25 Items
A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 20 Items
A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 42 Items
A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 18 Items
A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT&#59; DIAPHRAGM, VALVE, SPECIAL SHAPED&#59; DISK, VALVE, NONMETALLIC&#59; FILTERING DISK FLUID&#59; and INSULATOR, DISK.
What is a Glazier Point? 10 Items
A Glazier Point (POINT,GLAZIER) is a piece of thin sheet metal, triangular or diamond shaped, designed to hold a pane of glass in a wooden sash.
What is an Angle Bracket? 1105 Items
An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 81 Items
A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items
A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 32 Items
A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1130 Items
A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 20 Items
A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 49 Items
A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items
A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 37 Items
A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Quick Release Plunger? 13 Items
A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 114 Items
A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flush Catch? 97 Items
A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 13 Items
A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 86 Items
A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 115 Items
A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 177 Items
A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 24 Items
A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 53 Items
A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 219 Items
A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 40 Items
A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 494 Items
A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 353 Items
A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 55 Items
A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 51 Items
A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 12 Items
A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 601 Items
A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 32 Items
A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 39 Items
An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 34 Items
A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 41 Items
A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 21 Items
A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping? 19 Items
A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 93 Items
A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 117 Items
An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 31 Items
An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 45 Items
A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 19 Items
A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 832 Items
An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 35 Items
A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 40 Items
A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 75 Items
An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 106 Items
A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Picture Hanger? 10 Items
A Picture Hanger (HANGER,PICTURE) is a hook like device that is secured to walls, bulkheads, columns and the like, by means of a nail, screw, magnet or adhesive backed cloth, that is included with and/or attached to the hook. It is designed to hold and suspend variuos items such as photographs, paintings, maps, documents, etc.
What is a Protection Bellows? 16 Items
A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items
A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 57 Items
A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 49 Items
A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 2535 Items
A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 19 Items
An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items
A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 16 Items
A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 1222 Items
A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items
A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 48 Items
A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 64 Items
A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Threaded Hinged Standoff? 11 Items
A Threaded Hinged Standoff (STANDOFF,HINGED,THREADED) is a standoff, internally and/or externally, threaded on both ends with a hinge or pivot point to allow for independent movement of the ends.
What is a Spacing Threaded Standoff? 178 Items
A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 115 Items
A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a Crank Handle? 13 Items
A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 29 Items
A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Mechanic Equipment Hardware Kit? 87 Items
A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Dust And Moisture Seal Protective Cover? 38 Items
A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 51 Items
An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 308 Items
An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM&#59; SPRING (as modified)&#59; BUMPER, NONMETALLIC&#59; BUMPER, RUBBER&#59; BUSHING, NONMETALLIC&#59; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 41 Items
An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 39 Items
A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 178 Items
A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 27 Items
A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 80 Items
A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Tie Down Adapter? 11 Items
A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 34 Items
A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 86 Items
A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified)&#59; BUSHING, NONMETALLIC&#59; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Stock Items From Supply Class 5340 Page 39 of 64

200028398
PK2090
RNCC: 3 | RNVC: 2
200073759
10706795-001
RNCC: 3 | RNVC: 2
10706795
RNCC: D | RNVC: 9
200055505
IPL19800-05-11
RNCC: 3 | RNVC: 2
200026767
PWC37445
RNCC: 3 | RNVC: 2
200077675
10690254-001
RNCC: 3 | RNVC: 2
10690254
RNCC: D | RNVC: 9
200038672
106699389-001PW
RNCC: 3 | RNVC: 2
200073479
0976444
RNCC: 3 | RNVC: 2
0976444-1
RNCC: D | RNVC: 9
200046779
3070068-04
RNCC: 3 | RNVC: 2
219118232
SJ-5018 021200 673801
RNCC: 3 | RNVC: 2
200070787
0750-RL
RNCC: 3 | RNVC: 2
218688210
NO PRIMARY REF
RNCC: 3 | RNVC: 2
219129995
80-458-01690-219
RNCC: 3 | RNVC: 2
219136501
021-6394-05
RNCC: 3 | RNVC: 2
218605727
2100
RNCC: 3 | RNVC: 2
200008437
0175238-001
RNCC: 3 | RNVC: 2
0175238
RNCC: D | RNVC: 9
219084826
DA-05053-02
RNCC: 3 | RNVC: 2
200009353
10656587-011PEW
RNCC: 3 | RNVC: 2
218887633
16-TM-08223
RNCC: 3 | RNVC: 2
219080874
9017011
RNCC: 3 | RNVC: 2
219018761
G03021-1-9
RNCC: 3 | RNVC: 2
218881585
1
RNCC: 3 | RNVC: 2
219139902
9279903-1
RNCC: 3 | RNVC: 2
9279903-1
RNCC: 5 | RNVC: 2
200037309
B81002-120-1
RNCC: 3 | RNVC: 2
200009336
10638504-PEG
RNCC: 3 | RNVC: 2
216600511
840
RNCC: 3 | RNVC: 2
219018644
275147
RNCC: 3 | RNVC: 2
200058863
0677853-1
RNCC: 3 | RNVC: 2
0677853-1
RNCC: 5 | RNVC: 2
218840040
46-54396-98
RNCC: 3 | RNVC: 2
218426409
NO PRIM REF
RNCC: 3 | RNVC: 2
21-842-6409
RNCC: 5 | RNVC: 2
218498555
32-6821
RNCC: 3 | RNVC: 2
219055945
W3755116
RNCC: 3 | RNVC: 2
200060907
1075160-1
RNCC: 3 | RNVC: 2
218444543
C5P151137-1
RNCC: 3 | RNVC: 2
200076350
0976449-1
RNCC: 3 | RNVC: 2
218984813
453 8001-001
RNCC: 3 | RNVC: 2
218688269
G228
RNCC: 3 | RNVC: 1
218709321
IP905
RNCC: 3 | RNVC: 2
219111311
2420-1
RNCC: 3 | RNVC: 2
218669036
257
RNCC: 3 | RNVC: 1
218669340
C958PC
RNCC: 3 | RNVC: 2
219055872
TE10000443-001
RNCC: 3 | RNVC: 2
219083392
135 1355
RNCC: 3 | RNVC: 2
200060191
0656-400016-01
RNCC: 3 | RNVC: 2
200058826
10674297-001PG
RNCC: 3 | RNVC: 2
218551403
S4S50
RNCC: 3 | RNVC: 2
200059430
699-9981
RNCC: 3 | RNVC: 2
219118322
PK1178
RNCC: 3 | RNVC: 2
216600182
814
RNCC: 3 | RNVC: 1
814 1/2-1 1/4 X 3 1/4
RNCC: 3 | RNVC: 2
200033703
600-92652-3
RNCC: 3 | RNVC: 2
218984659
1427P
RNCC: 3 | RNVC: 2
1879-0001-01
RNCC: 5 | RNVC: 2
200010324
TD-DS-012
RNCC: 3 | RNVC: 2
200052696
10672461-001PG
RNCC: 3 | RNVC: 2
218840065
46-54427-108
RNCC: 3 | RNVC: 2
219055690
8778044
RNCC: 3 | RNVC: 2
838-801
RNCC: 5 | RNVC: 1
8778044
RNCC: 5 | RNVC: 2
218056389
GF20-32-32A0
RNCC: 3 | RNVC: 2
200035634
B0305090CC8N07
RNCC: 3 | RNVC: 2
200041216
10673543-011PW
RNCC: 3 | RNVC: 2
200025084
10660276-011
RNCC: 3 | RNVC: 2
218743865
44
RNCC: 3 | RNVC: 2
WHIRLR0LLER44
RNCC: 5 | RNVC: 2
219143665
9689091-1
RNCC: 3 | RNVC: 2
218709543
XD40125DX
RNCC: 3 | RNVC: 2
P201465-5
RNCC: 5 | RNVC: 2
218962131
8382576
RNCC: 3 | RNVC: 2
8074002-1
RNCC: 5 | RNVC: 2
218887644
101-A-4C-VG
RNCC: 3 | RNVC: 2
218130944
R52-2
RNCC: 3 | RNVC: 2
219118287
99-0166
RNCC: 3 | RNVC: 2
218881412
512206-0207
RNCC: 3 | RNVC: 2
200044297
JE-08-12
RNCC: 3 | RNVC: 2
200076725
10705443-001PW
RNCC: 3 | RNVC: 2
10705443
RNCC: 5 | RNVC: 2
218950762
8280860
RNCC: 3 | RNVC: 2
8280860-A1
RNCC: 5 | RNVC: 2
16015000200
RNCC: 5 | RNVC: 2
219080976
161.97.77.0063
RNCC: 3 | RNVC: 2
219201949
10524297
RNCC: 3 | RNVC: 2
219066303
CF414352B
RNCC: 3 | RNVC: 2
219084831
DA-05053-07
RNCC: 3 | RNVC: 2
216600850
200B
RNCC: 3 | RNVC: 2
131-8725
RNCC: 6 | RNVC: 9
219129873
5100-S7-8
RNCC: 3 | RNVC: 2
200038071
0777240
RNCC: 3 | RNVC: 2
219084679
CF 332 229 A
RNCC: 3 | RNVC: 2
219111366
9377442-1
RNCC: 3 | RNVC: 2
200013980
PK3654-25
RNCC: 3 | RNVC: 2
218995723
C5H10018-27
RNCC: 3 | RNVC: 2
200059995
0656-036452-03
RNCC: 3 | RNVC: 2
200076678
10703698-011PW
RNCC: 3 | RNVC: 2
10703698
RNCC: D | RNVC: 9
218689443
N0PARTN0
RNCC: 3 | RNVC: 1
1258C3
RNCC: 3 | RNVC: 2
219083275
615 00 09 0037
RNCC: 3 | RNVC: 2
200074434
9800K522-01
RNCC: 3 | RNVC: 2
200070101
42325-01
RNCC: 3 | RNVC: 2
218938589
88-8007-01
RNCC: 3 | RNVC: 2
219080497
05176005
RNCC: 3 | RNVC: 2
01145580
RNCC: 6 | RNVC: 9
213118986
704
RNCC: 3 | RNVC: 2
218607990
311C14
RNCC: 3 | RNVC: 1
69GP1
RNCC: 4 | RNVC: 1
218807949
311 1-4
RNCC: 3 | RNVC: 2
200049446
TE30016686-002
RNCC: 3 | RNVC: 2
219084782
284 791
RNCC: 3 | RNVC: 2
219001595
S241526
RNCC: 3 | RNVC: 2
218950070
RAW22
RNCC: 3 | RNVC: 2
219134534
10627638
RNCC: 3 | RNVC: 2
10627638
RNCC: 5 | RNVC: 2
10627638
RNCC: 5 | RNVC: 2
218590518
E339
RNCC: 3 | RNVC: 2
219080562
04080370
RNCC: 3 | RNVC: 2
218054322
BK14487
RNCC: 3 | RNVC: 2
218669694
65
RNCC: 3 | RNVC: 1
218689851
22265
RNCC: 3 | RNVC: 2
C83SIZE9DRAWINGS8
RNCC: 4 | RNVC: 2
200021586
10617814
RNCC: 3 | RNVC: 2
219055280
10-03680-01
RNCC: 3 | RNVC: 2
200063153
100901-015-1
RNCC: 3 | RNVC: 2
219055464
701-437200-902-0
RNCC: 3 | RNVC: 2
218669709
108
RNCC: 3 | RNVC: 1
200031905
541308
RNCC: 3 | RNVC: 2
541308
RNCC: 5 | RNVC: 2
218688941
775MK.
RNCC: 3 | RNVC: 2
5340-5111
RNCC: 6 | RNVC: 9
219108710
PS180959-01
RNCC: 3 | RNVC: 2
219055148
1154
RNCC: 3 | RNVC: 2
219123263
8827879
RNCC: 3 | RNVC: 2
219080346
134MOVEMENT02
RNCC: 3 | RNVC: 2
3513 020 4860
RNCC: 5 | RNVC: 2
218513223
0391
RNCC: 3 | RNVC: 2
218669030
MK3SM729
RNCC: 3 | RNVC: 2
218840755
3215
RNCC: 3 | RNVC: 2
218442224
3011T87P01
RNCC: 3 | RNVC: 2
200030769
A22200-0141-1
RNCC: 3 | RNVC: 2
219150123
10607199
RNCC: 3 | RNVC: 2
200037595
410SH-19
RNCC: 3 | RNVC: 2
33410SH-70-6 ITEM 6
RNCC: 5 | RNVC: 2
218633508
91127U
RNCC: 3 | RNVC: 1
130-2951
RNCC: 6 | RNVC: 9
200017968
GM3-M1510A
RNCC: 3 | RNVC: 2
219018557
100987.01.2.608
RNCC: 3 | RNVC: 2
218807429
240961
RNCC: 3 | RNVC: 2
219018415
69150
RNCC: 3 | RNVC: 2
219130052
075662
RNCC: 3 | RNVC: 2
218984734
825-146
RNCC: 3 | RNVC: 2
218742712
635-5353-001
RNCC: 3 | RNVC: 2
218950391
8757006
RNCC: 3 | RNVC: 2
219084866
8877067-1
RNCC: 3 | RNVC: 2
110289
RNCC: 5 | RNVC: 2
219123219
R2067-0
RNCC: 3 | RNVC: 2
200066590
F-1510-1
RNCC: 3 | RNVC: 2
SML000151
RNCC: 5 | RNVC: 2
F-1510-1
RNCC: 5 | RNVC: 2
211122165
365688
RNCC: 3 | RNVC: 2
218408032
4387-56
RNCC: 3 | RNVC: 2
219111364
9377443
RNCC: 3 | RNVC: 2
219084801
CF 222 273 B
RNCC: 3 | RNVC: 2
200080322
0976552-1
RNCC: 3 | RNVC: 2
219055177
6-606TH
RNCC: 3 | RNVC: 2
219208352
9780967-1
RNCC: 3 | RNVC: 2
9780976-1
RNCC: 5 | RNVC: 2
213119553
J800-32
RNCC: 3 | RNVC: 2
218689088
DCR400M2
RNCC: 3 | RNVC: 1
5340-5147
RNCC: 6 | RNVC: 9
200055857
AC40316-10
RNCC: 3 | RNVC: 2
218904653
3
RNCC: 3 | RNVC: 2
218409964
1971-4
RNCC: 3 | RNVC: 2
219132973
9280501-1
RNCC: 3 | RNVC: 2
216601914
313
RNCC: 3 | RNVC: 1
313X1/2-6
RNCC: 3 | RNVC: 2
219080094
8711853-3
RNCC: 3 | RNVC: 2
200002485
9379228-1
RNCC: 3 | RNVC: 2
200051153
543705-1
RNCC: 3 | RNVC: 2
218773471
B262PD.
RNCC: 3 | RNVC: 2
200036808
12738889
RNCC: 3 | RNVC: 2
200035771
1SI0058-50
RNCC: 3 | RNVC: 2
219018964
CA5H
RNCC: 3 | RNVC: 2
218969883
21SB-28
RNCC: 3 | RNVC: 2
219208467
9378720-2
RNCC: 3 | RNVC: 2
200076962
1176912-1
RNCC: 1 | RNVC: 2
05176
RNCC: 3 | RNVC: 2
2037-612
RNCC: 5 | RNVC: 2
211141813
313205
RNCC: 3 | RNVC: 2
313205
RNCC: 3 | RNVC: 2
16916001500
RNCC: 5 | RNVC: 2
200004793
10608789
RNCC: 3 | RNVC: 2
218825305
7990409
RNCC: 3 | RNVC: 2
219084059
215-90401-2
RNCC: 3 | RNVC: 2
219080580
8863861-2
RNCC: 3 | RNVC: 2
8863861-2
RNCC: 5 | RNVC: 2
200002442
9378518-1
RNCC: 3 | RNVC: 2
219055094
2-100873
RNCC: 3 | RNVC: 2
B4871-001
RNCC: 5 | RNVC: 2
219055263
HXK-55
RNCC: 3 | RNVC: 2
200051131
PWC34597
RNCC: 3 | RNVC: 2
200038582
9776168-1
RNCC: 3 | RNVC: 2
219111365
9377441-1
RNCC: 3 | RNVC: 2
218984511
KI05-180
RNCC: 3 | RNVC: 2
218807416
SS51003K1110
RNCC: 3 | RNVC: 2
200023179
10655966-011
RNCC: 3 | RNVC: 2
10655966
RNCC: D | RNVC: 9
200035004
524-477480-000
RNCC: 3 | RNVC: 2
200031151
B3210061-1 SR1
RNCC: 3 | RNVC: 2
219055271
8281070
RNCC: 3 | RNVC: 2
16001001800
RNCC: 6 | RNVC: 9
200080132
218875-001
RNCC: 3 | RNVC: 2
200073793
10689339-011PEW
RNCC: 3 | RNVC: 2
10689339
RNCC: D | RNVC: 9
218626600
2024XT109X8254EX187ESXDAB810
RNCC: 3 | RNVC: 1
7323X1719X1121X2140X75213
RNCC: 3 | RNVC: 1
6725X1682X562X125
RNCC: 3 | RNVC: 1
7660XD35X15XG522X15XDY1305XTM11-
RNCC: 3 | RNVC: 1
7323X1719X1121X2140X75213
RNCC: 3 | RNVC: 1
132-3634
RNCC: 6 | RNVC: 9
200024191
130014DE356-1
RNCC: 3 | RNVC: 2
200051592
542197-1
RNCC: 3 | RNVC: 2
200043754
541718-1
RNCC: 3 | RNVC: 2
218887572
9696X31
RNCC: 3 | RNVC: 2
219148173
10625244
RNCC: 3 | RNVC: 2
219080209
3513 172 2087
RNCC: 3 | RNVC: 2
218868110
P9772
RNCC: 3 | RNVC: 2
219083565
PQB-CTP
RNCC: 3 | RNVC: 2
27052600010
RNCC: 5 | RNVC: 2
200053418
82710019-001
RNCC: 3 | RNVC: 2
219131428
G-23
RNCC: 3 | RNVC: 2
G-23
RNCC: 5 | RNVC: 2
216601854
301
RNCC: 3 | RNVC: 1
301X5/16-4 1/2
RNCC: 3 | RNVC: 2
185-6912
RNCC: 6 | RNVC: 9
200076054
10703768-001PEW
RNCC: 3 | RNVC: 2
10703768
RNCC: D | RNVC: 9
200040414
0377317-1
RNCC: 3 | RNVC: 2
200065740
10628420-PW
RNCC: 3 | RNVC: 2
200054150
0976205-1
RNCC: 3 | RNVC: 2
218780051
6111
RNCC: 3 | RNVC: 2
200037450
K215-51361-2
RNCC: 3 | RNVC: 2
219214860
10-52193-01
RNCC: 3 | RNVC: 2
200031648
B61000-259-1
RNCC: 3 | RNVC: 2
B61000-259
RNCC: 5 | RNVC: 1
200034432
B51004-054-1
RNCC: 3 | RNVC: 2
218807355
219-10017-5
RNCC: 3 | RNVC: 2
6-027219-C2
RNCC: 3 | RNVC: 2
200059057
0677729-1
RNCC: 3 | RNVC: 2
200075146
0976441-1
RNCC: 3 | RNVC: 2
218742856
00-162802
RNCC: 3 | RNVC: 2
200079897
0989057-1
RNCC: 3 | RNVC: 2
218950875
420499
RNCC: 3 | RNVC: 2
200074532
RP417779
RNCC: 3 | RNVC: 2
219129868
0780127N02
RNCC: 3 | RNVC: 2
219055863
CF 818 258 A
RNCC: 3 | RNVC: 2
219085148
CV 408 266A
RNCC: 3 | RNVC: 2
216600864
2
RNCC: 3 | RNVC: 2
160-6142
RNCC: 6 | RNVC: 9
219071111
CF 808 655 AE
RNCC: 3 | RNVC: 2
200042703
10672480-011
RNCC: 3 | RNVC: 2
200073480
0976448
RNCC: 3 | RNVC: 2
0976448-1
RNCC: D | RNVC: 9
219084839
K2-1248
RNCC: 3 | RNVC: 2
200010157
10657218-011PEG
RNCC: 3 | RNVC: 2
219055220
W4098570D
RNCC: 3 | RNVC: 2
200027788
K2PKR-M
RNCC: 3 | RNVC: 2
200064689
381498FIG10 DH/C
RNCC: 3 | RNVC: 2
200038439
9877877-1
RNCC: 3 | RNVC: 2
218969540
M-24677
RNCC: 3 | RNVC: 2
219080221
3513 172 2114
RNCC: 3 | RNVC: 2
200031915
541302
RNCC: 3 | RNVC: 2
541302
RNCC: 5 | RNVC: 2
216601445
251-5
RNCC: 3 | RNVC: 2
218828236
0-0
RNCC: 3 | RNVC: 1
218669676
0-0
RNCC: 3 | RNVC: 1
200028288
0476289-001
RNCC: 3 | RNVC: 2
0476289
RNCC: 5 | RNVC: 1
9715-001
RNCC: 5 | RNVC: 2
200015920
10657497-001PEG
RNCC: 3 | RNVC: 2
10657497
RNCC: D | RNVC: 9
219132186
10624965
RNCC: 3 | RNVC: 1
10624965-PG
RNCC: 5 | RNVC: 2
200002351
9379501-1
RNCC: 3 | RNVC: 2
218689465
26LHUS28
RNCC: 3 | RNVC: 2
216600859
0
RNCC: 3 | RNVC: 2
160-6320
RNCC: 6 | RNVC: 9
218772423
9113A0188-2
RNCC: 3 | RNVC: 2
218536813
12ZR1001-2
RNCC: 3 | RNVC: 2
219208653
9378408-3
RNCC: 3 | RNVC: 2
218938889
73100-01
RNCC: 3 | RNVC: 2
6999.027
RNCC: 5 | RNVC: 2
218461050
8-11830-5
RNCC: 3 | RNVC: 2
219148615
1237-293-1
RNCC: 3 | RNVC: 2
200040743
10552744-8
RNCC: 3 | RNVC: 2
10552744-8
RNCC: 3 | RNVC: 2
10552744-8
RNCC: 7 | RNVC: 2
200063748
1003658
RNCC: 3 | RNVC: 2
1003658
RNCC: 3 | RNVC: 9
200068398
1276087
RNCC: 3 | RNVC: 2
218762071
10011
RNCC: 3 | RNVC: 2
219129744
1274-1
RNCC: 3 | RNVC: 2
219055693
3-100898
RNCC: 3 | RNVC: 2
219084710
CF 819 609 A
RNCC: 3 | RNVC: 2
219080993
181 A 13 0007
RNCC: 3 | RNVC: 2
216600230
BB241C4 5 X 5
RNCC: 3 | RNVC: 2
69GP1
RNCC: 4 | RNVC: 1
200010776
C20600-069-1
RNCC: 3 | RNVC: 2
218916592
M4628-41
RNCC: 3 | RNVC: 2
200028703
10664069-011PW
RNCC: 3 | RNVC: 2
10664069
RNCC: 5 | RNVC: 1
218688055
WRH4SL
RNCC: 3 | RNVC: 2
200068954
MVHD
RNCC: 3 | RNVC: 2
200049629
0989050-1
RNCC: 3 | RNVC: 2
200023205
1.02254.441
RNCC: 3 | RNVC: 2
218962609
STOP-DOOR
RNCC: 3 | RNVC: 2
200003677
10656960-001PW
RNCC: 3 | RNVC: 2
200070644
0677926-1
RNCC: 3 | RNVC: 2
0677926
RNCC: D | RNVC: 9
219018330
12-22-H
RNCC: 3 | RNVC: 2
218984680
59240
RNCC: 3 | RNVC: 2
200044629
B30801-004-1
RNCC: 3 | RNVC: 2
B30801-004
RNCC: 5 | RNVC: 1
219118241
SJ-5306 021200 675607
RNCC: 3 | RNVC: 2
216295027
288FIG2
RNCC: 3 | RNVC: 2
218916430
810AS1397
RNCC: 3 | RNVC: 2
218426776
S5
RNCC: 3 | RNVC: 2
218962290
1014
RNCC: 3 | RNVC: 2
15749
RNCC: 5 | RNVC: 1
218984062
AP695066
RNCC: 3 | RNVC: 2
218709281
2-102
RNCC: 3 | RNVC: 1
2-2-102
RNCC: 3 | RNVC: 2
219055600
704-137105-907
RNCC: 3 | RNVC: 2
219108614
1D-07-289
RNCC: 3 | RNVC: 2
200069628
40323SP
RNCC: 3 | RNVC: 2
40323
RNCC: 3 | RNVC: 9
218513591
15641ZP
RNCC: 3 | RNVC: 2
218984100
4537994-801
RNCC: 3 | RNVC: 2
219202347
PWC30616
RNCC: 3 | RNVC: 2
219129745
12743-2
RNCC: 3 | RNVC: 2
200001734
9379102-2
RNCC: 3 | RNVC: 2
219118278
6400
RNCC: 3 | RNVC: 2
218969904
4D944
RNCC: 3 | RNVC: 2
218474003
1862
RNCC: 3 | RNVC: 2
200032374
B30601-069-1
RNCC: 3 | RNVC: 2
218590141
80-3A
RNCC: 3 | RNVC: 2
200039061
10200000
RNCC: 3 | RNVC: 2
10200000
RNCC: 5 | RNVC: 2
218915907
1030
RNCC: 3 | RNVC: 2
219055312
6000-50-1515
RNCC: 3 | RNVC: 2
200009330
DBA0024.3
RNCC: 3 | RNVC: 2