Hardware, Commercial - Canada (CA)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Canada (CA) - NCB is 20 or 21

Page 37 of 64

NSN Format for Hardware, Commercial
Codified by Canada

534021XXXXXXX
Group
FSG
ClassNCBIdentifier
FSC
Federal Supply Class
NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Canada (CA)
FSC 5340 Hardware, Commercial - Canada (CA)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340 Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?
FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?
NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?
FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?
NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340 Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 190 Items
A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 63 Items
A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 26 Items
What is a Rod End Connector? 44 Items
A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 69 Items
A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 226 Items
A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 94 Items
An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 20 Items
A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 582 Items
A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 43 Items
A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 202 Items
A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 65 Items
A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Shelf Bracket? 33 Items
A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items
A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Door Hook And Eye? 22 Items
A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 77 Items
A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 12 Items
A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 23 Items
A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 23 Items
A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 44 Items
A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 13 Items
A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is a Friction Catch? 38 Items
A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 15 Items
A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 39 Items
A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 26 Items
A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 86 Items
A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 20 Items
A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 42 Items
A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 91 Items
A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 57 Items
A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items
A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 25 Items
A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 163 Items
A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 101 Items
A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 21 Items
A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 16 Items
A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items
A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 288 Items
An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 52 Items
A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 23 Items
A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 131 Items
A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 24 Items
A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 41 Items
A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 70 Items
A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 45 Items
A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 210 Items
A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 163 Items
A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 82 Items
A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 44 Items
A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 38 Items
A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 25 Items
A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 20 Items
A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 42 Items
A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 18 Items
A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT&#59; DIAPHRAGM, VALVE, SPECIAL SHAPED&#59; DISK, VALVE, NONMETALLIC&#59; FILTERING DISK FLUID&#59; and INSULATOR, DISK.
What is a Glazier Point? 10 Items
A Glazier Point (POINT,GLAZIER) is a piece of thin sheet metal, triangular or diamond shaped, designed to hold a pane of glass in a wooden sash.
What is an Angle Bracket? 1105 Items
An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 81 Items
A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items
A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 32 Items
A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1130 Items
A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 20 Items
A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 49 Items
A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items
A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 37 Items
A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Quick Release Plunger? 13 Items
A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 114 Items
A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flush Catch? 97 Items
A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 13 Items
A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 86 Items
A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 115 Items
A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 177 Items
A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 24 Items
A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 53 Items
A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 219 Items
A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 40 Items
A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 494 Items
A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 353 Items
A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 55 Items
A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 51 Items
A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 12 Items
A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 601 Items
A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 32 Items
A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 39 Items
An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 34 Items
A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 41 Items
A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 21 Items
A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping? 19 Items
A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 93 Items
A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 117 Items
An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 31 Items
An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 45 Items
A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 19 Items
A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 832 Items
An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 35 Items
A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 40 Items
A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 75 Items
An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 106 Items
A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Picture Hanger? 10 Items
A Picture Hanger (HANGER,PICTURE) is a hook like device that is secured to walls, bulkheads, columns and the like, by means of a nail, screw, magnet or adhesive backed cloth, that is included with and/or attached to the hook. It is designed to hold and suspend variuos items such as photographs, paintings, maps, documents, etc.
What is a Protection Bellows? 16 Items
A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items
A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 57 Items
A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 49 Items
A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 2535 Items
A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 19 Items
An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items
A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 16 Items
A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 1222 Items
A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items
A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 48 Items
A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 64 Items
A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Threaded Hinged Standoff? 11 Items
A Threaded Hinged Standoff (STANDOFF,HINGED,THREADED) is a standoff, internally and/or externally, threaded on both ends with a hinge or pivot point to allow for independent movement of the ends.
What is a Spacing Threaded Standoff? 178 Items
A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 115 Items
A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a Crank Handle? 13 Items
A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 29 Items
A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Mechanic Equipment Hardware Kit? 87 Items
A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Dust And Moisture Seal Protective Cover? 38 Items
A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 51 Items
An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 308 Items
An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM&#59; SPRING (as modified)&#59; BUMPER, NONMETALLIC&#59; BUMPER, RUBBER&#59; BUSHING, NONMETALLIC&#59; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 41 Items
An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 39 Items
A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 178 Items
A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 27 Items
A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 80 Items
A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Tie Down Adapter? 11 Items
A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 34 Items
A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 86 Items
A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified)&#59; BUSHING, NONMETALLIC&#59; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Stock Items From Supply Class 5340 Page 37 of 64

200006866
15665
RNCC: 3 | RNVC: 2
219055497
10197
RNCC: 3 | RNVC: 2
219125855
3118019-01
RNCC: 3 | RNVC: 2
200080127
218083-001
RNCC: 3 | RNVC: 2
218084459
41A90439
RNCC: 3 | RNVC: 2
219084815
555 173
RNCC: 3 | RNVC: 2
218937820
4024-LH
RNCC: 3 | RNVC: 2
219080055
TH-109
RNCC: 3 | RNVC: 2
218969685
31973
RNCC: 3 | RNVC: 2
219142621
W4631007
RNCC: 3 | RNVC: 2
219080638
06290073
RNCC: 3 | RNVC: 2
218607933
E556
RNCC: 3 | RNVC: 2
218689669
97
RNCC: 3 | RNVC: 1
219084455
317-333
RNCC: 3 | RNVC: 2
219200403
10607263-02
RNCC: 3 | RNVC: 2
218916166
4010-49TL
RNCC: 3 | RNVC: 2
216601167
3791
RNCC: 3 | RNVC: 2
211089210
ZFFV132385
RNCC: 3 | RNVC: 2
219129998
11-51508A6
RNCC: 3 | RNVC: 2
200011402
895-231
RNCC: 3 | RNVC: 2
200015356
0358572
RNCC: 3 | RNVC: 2
218978463
268-1540
RNCC: 3 | RNVC: 2
216602100
8088
RNCC: 3 | RNVC: 2
218780799
63-0072
RNCC: 3 | RNVC: 2
200074448
9800K255-01
RNCC: 3 | RNVC: 2
200074449
9800K239-01
RNCC: 3 | RNVC: 2
200015152
GS297-0465-3
RNCC: 3 | RNVC: 2
200044762
0775453-1
RNCC: 3 | RNVC: 2
0775453
RNCC: 5 | RNVC: 1
219128481
WW 488 381A
RNCC: 3 | RNVC: 2
219018733
DUSTCOVER
RNCC: 3 | RNVC: 2
218418572
460-7307
RNCC: 3 | RNVC: 2
219215575
B61000-050-2
RNCC: 3 | RNVC: 2
219144863
TRN 7799A
RNCC: 3 | RNVC: 2
218512120
2014
RNCC: 3 | RNVC: 1
218688157
A51PDPLY32D
RNCC: 3 | RNVC: 2
218978156
2712-4569
RNCC: 3 | RNVC: 2
219084760
311 916
RNCC: 3 | RNVC: 2
218887690
FP0620BSP
RNCC: 3 | RNVC: 2
FP0620BSP
RNCC: 3 | RNVC: 2
218984372
22010/30
RNCC: 3 | RNVC: 2
219125878
HLN-6372A
RNCC: 3 | RNVC: 2
200030242
B61000-278-1
RNCC: 3 | RNVC: 2
219080911
BR5170-16.0-35-MOD-A-10MM
RNCC: 3 | RNVC: 2
PS190493.01.5.238
RNCC: 5 | RNVC: 2
200029093
B51005-024-1
RNCC: 3 | RNVC: 2
200067204
B51007-249-1
RNCC: 3 | RNVC: 2
200058999
VD-08-00052
RNCC: 3 | RNVC: 2
219055492
00285
RNCC: 3 | RNVC: 2
200064481
A20618-041-1
RNCC: 3 | RNVC: 2
200024098
130014BS901-3
RNCC: 3 | RNVC: 2
200080048
44935
RNCC: 3 | RNVC: 2
200069554
AC19035
RNCC: 3 | RNVC: 2
0752152
RNCC: 5 | RNVC: 2
219111314
2420-84
RNCC: 3 | RNVC: 2
200043282
3000394
RNCC: 3 | RNVC: 2
3000394
RNCC: 3 | RNVC: 9
200063162
100901-014-1
RNCC: 3 | RNVC: 2
200056661
AC16070-09
RNCC: 3 | RNVC: 2
219125891
HS16-650-016
RNCC: 3 | RNVC: 2
216601920
346B
RNCC: 3 | RNVC: 2
219209550
315-654
RNCC: 3 | RNVC: 2
218484505
750C
RNCC: 3 | RNVC: 2
200078607
7007-1084-1
RNCC: 3 | RNVC: 2
218194824
S3264T00308
RNCC: 3 | RNVC: 2
200020054
10656571-001PW
RNCC: 3 | RNVC: 2
10656571
RNCC: D | RNVC: 9
218887886
PD-06201-12
RNCC: 3 | RNVC: 2
218659827
89C41837-35
RNCC: 3 | RNVC: 2
89C41837-61
RNCC: 3 | RNVC: 2
200077680
10665476-011PEG
RNCC: 3 | RNVC: 2
10665476
RNCC: D | RNVC: 9
200078427
10708521-001PEG
RNCC: 3 | RNVC: 2
10708521
RNCC: D | RNVC: 9
218916543
B520-158
RNCC: 3 | RNVC: 2
200005062
A0318207
RNCC: 3 | RNVC: 2
218428477
107S8328-14
RNCC: 3 | RNVC: 2
218840076
46-56488
RNCC: 3 | RNVC: 2
219085250
28443M
RNCC: 3 | RNVC: 2
218969877
78S-28
RNCC: 3 | RNVC: 2
218984088
RY-04227-08
RNCC: 3 | RNVC: 2
200063050
1097-0003
RNCC: 3 | RNVC: 2
200060339
82520502-001
RNCC: 3 | RNVC: 2
218762216
429669C1
RNCC: 3 | RNVC: 2
200018056
GM3-M6493A
RNCC: 3 | RNVC: 2
219018388
251-890
RNCC: 3 | RNVC: 2
218773379
12-016X66
RNCC: 3 | RNVC: 2
200056654
AC16070-11
RNCC: 3 | RNVC: 2
219210375
0T715-46-L2
RNCC: 3 | RNVC: 2
200058179
0875377-1
RNCC: 3 | RNVC: 2
200035989
0775855-1
RNCC: 3 | RNVC: 2
200035340
10639600-PW
RNCC: 3 | RNVC: 2
10639600
RNCC: 5 | RNVC: 1
200045995
301012-001
RNCC: 3 | RNVC: 2
301012
RNCC: 5 | RNVC: 1
200060765
TLS-HOOK
RNCC: 3 | RNVC: 2
218594178
A300T
RNCC: 3 | RNVC: 1
218916876
6261781
RNCC: 3 | RNVC: 2
219080979
590 00 36 0158
RNCC: 3 | RNVC: 2
200017141
10617226
RNCC: 3 | RNVC: 2
200041934
10671952-011
RNCC: 3 | RNVC: 2
200025913
10663261-011
RNCC: 3 | RNVC: 2
218984677
53378
RNCC: 3 | RNVC: 2
219018105
453 6724-802
RNCC: 3 | RNVC: 2
218795361
35600
RNCC: 3 | RNVC: 2
211121616
109381
RNCC: 3 | RNVC: 2
218915229
HANDLE VENT WINDOW
RNCC: 3 | RNVC: 2
218937955
HA1119X
RNCC: 3 | RNVC: 2
218-26D
RNCC: 3 | RNVC: 2
219018546
450-972803-000
RNCC: 3 | RNVC: 2
9040121
RNCC: 5 | RNVC: 2
219215268
B61000-089-1
RNCC: 3 | RNVC: 2
200059330
0925265-1
RNCC: 3 | RNVC: 2
219138949
215-40255-5
RNCC: 3 | RNVC: 2
218131660
BACC15AF13A
RNCC: 3 | RNVC: 2
218828064
4843372052
RNCC: 3 | RNVC: 2
218773791
1721
RNCC: 3 | RNVC: 2
200050091
204703
RNCC: 3 | RNVC: 2
219085008
C6FS2221-1
RNCC: 3 | RNVC: 2
200000637
9379104-1
RNCC: 3 | RNVC: 2
200023576
HSB108
RNCC: 3 | RNVC: 2
218978345
130-2283R
RNCC: 3 | RNVC: 2
536-920003-004
RNCC: 5 | RNVC: 2
218807914
6829
RNCC: 3 | RNVC: 2
219083785
740551
RNCC: 3 | RNVC: 2
218938480
890816
RNCC: 3 | RNVC: 2
219083380
1319132
RNCC: 3 | RNVC: 2
200070530
0677912
RNCC: 3 | RNVC: 2
200017537
140056
RNCC: 3 | RNVC: 2
219055370
1139-5414
RNCC: 3 | RNVC: 2
219144853
9279267-1
RNCC: 3 | RNVC: 2
216601106
1289-2
RNCC: 3 | RNVC: 2
218950521
4381438720
RNCC: 3 | RNVC: 2
218887674
MS35821-3C
RNCC: 2 | RNVC: 2
218510131
H54F
RNCC: 3 | RNVC: 2
218962229
M530-201
RNCC: 3 | RNVC: 2
219118238
SJ-5027 021200 184567
RNCC: 3 | RNVC: 2
200016860
GM3-M6974A
RNCC: 3 | RNVC: 2
218061607
476D066H06
RNCC: 3 | RNVC: 2
200063224
83210026-003
RNCC: 3 | RNVC: 2
200011104
GS298-0001-2002
RNCC: 3 | RNVC: 2
219083347
1319193
RNCC: 3 | RNVC: 2
218762233
14108
RNCC: 3 | RNVC: 2
200034879
10665857-001
RNCC: 3 | RNVC: 2
10665857
RNCC: 5 | RNVC: 1
219209130
OT222-230-22
RNCC: 3 | RNVC: 2
219018251
C6FF1158-31
RNCC: 3 | RNVC: 2
200013127
JN-982000625
RNCC: 3 | RNVC: 2
200013807
715397-003
RNCC: 3 | RNVC: 2
218688558
C5WM126242-27
RNCC: 3 | RNVC: 2
219084314
990-14-52-0311
RNCC: 3 | RNVC: 2
219085253
28446M
RNCC: 3 | RNVC: 2
213119604
A14M6
RNCC: 3 | RNVC: 2
A14M6
RNCC: 3 | RNVC: 2
A14M6
RNCC: 3 | RNVC: 2
J865ALUMINUM
RNCC: 3 | RNVC: 2
219084813
536 315
RNCC: 3 | RNVC: 2
219080904
12A00460P04
RNCC: 3 | RNVC: 2
219148252
05134032
RNCC: 3 | RNVC: 2
5134032
RNCC: 5 | RNVC: 2
219018892
WW404267
RNCC: 3 | RNVC: 2
218484379
41A35126-139
RNCC: 3 | RNVC: 2
219134848
3314
RNCC: 3 | RNVC: 2
218916909
CN190369
RNCC: 3 | RNVC: 2
200050066
099-183
RNCC: 3 | RNVC: 2
200068412
10689555
RNCC: 3 | RNVC: 2
10689555-001
RNCC: D | RNVC: 9
200049970
10673306-001
RNCC: 3 | RNVC: 2
211121615
S364-1020P8
RNCC: 3 | RNVC: 2
YS364-1020P8
RNCC: 3 | RNVC: 2
364-1020P8
RNCC: 3 | RNVC: 2
218762196
08560263
RNCC: 3 | RNVC: 2
210013599
D55405B
RNCC: 3 | RNVC: 2
218969885
81C-28
RNCC: 3 | RNVC: 2
218861316
C5V15047-3
RNCC: 3 | RNVC: 2
219208650
9378361-1
RNCC: 3 | RNVC: 2
200048898
10672230-011PG
RNCC: 3 | RNVC: 2
200050375
524-351946-000
RNCC: 3 | RNVC: 2
200051417
10669270-011PEG
RNCC: 3 | RNVC: 2
218474945
3915-14DRYVIN
RNCC: 3 | RNVC: 2
218417611
5405
RNCC: 3 | RNVC: 2
130-4161
RNCC: 6 | RNVC: 9
218773256
1004
RNCC: 3 | RNVC: 2
219083601
CF814467AE
RNCC: 3 | RNVC: 2
219130004
11-P419F1111
RNCC: 3 | RNVC: 2
218743697
G227-3-4X18
RNCC: 3 | RNVC: 2
10-32117
RNCC: 3 | RNVC: 2
G227-3-4X18
RNCC: 3 | RNVC: 2
HG227-3/4X18
RNCC: 3 | RNVC: 2
218659198
2096
RNCC: 3 | RNVC: 2
218054402
D23653
RNCC: 3 | RNVC: 2
218536803
S1228-12
RNCC: 3 | RNVC: 2
219019002
BS2552-14-00-015
RNCC: 3 | RNVC: 2
218984826
353 6957-001
RNCC: 3 | RNVC: 2
219141553
257953-001
RNCC: 3 | RNVC: 2
200069637
10678656-011PW
RNCC: 3 | RNVC: 2
218780876
2045
RNCC: 3 | RNVC: 2
218807427
240959
RNCC: 3 | RNVC: 2
200033716
LK18555
RNCC: 3 | RNVC: 2
218659200
2095
RNCC: 3 | RNVC: 2
218409278
69GP2
RNCC: 2 | RNVC: 1
644X3C
RNCC: 3 | RNVC: 2
130-5233
RNCC: 6 | RNVC: 9
218904867
8280632
RNCC: 3 | RNVC: 2
16009003100
RNCC: 5 | RNVC: 2
218984503
12-22 1/2-D
RNCC: 3 | RNVC: 2
12-22.5D
RNCC: 3 | RNVC: 2
219084085
B183093241
RNCC: 3 | RNVC: 2
216602389
5831
RNCC: 3 | RNVC: 2
199
RNCC: 3 | RNVC: 2
X13
RNCC: 3 | RNVC: 2
1199
RNCC: 3 | RNVC: 2
218417814
821C4-3.5 BY 3.5
RNCC: 3 | RNVC: 2
821C4-3 1/2IN
RNCC: 3 | RNVC: 2
200054528
B30603-532-1
RNCC: 3 | RNVC: 2
200058230
381498FIG10
RNCC: 3 | RNVC: 1
200081383
10720693-001
RNCC: 3 | RNVC: 2
10720693
RNCC: D | RNVC: 9
216601835
1160
RNCC: 3 | RNVC: 2
218950651
P15059
RNCC: 3 | RNVC: 2
218709841
1044465-502
RNCC: 3 | RNVC: 2
0035-7705
RNCC: 6 | RNVC: 9
200055956
AC40341-06
RNCC: 3 | RNVC: 2
219084108
B183801515
RNCC: 3 | RNVC: 2
216600836
222
RNCC: 3 | RNVC: 2
130-2126
RNCC: 6 | RNVC: 9
200031837
541314
RNCC: 3 | RNVC: 2
200028337
318-800087-23
RNCC: 3 | RNVC: 2
218840054
46-54400-353
RNCC: 3 | RNVC: 2
219119194
A164-08
RNCC: 3 | RNVC: 2
216292023
W3115
RNCC: 3 | RNVC: 2
219209077
9878205-1
RNCC: 3 | RNVC: 2
218409337
997
RNCC: 3 | RNVC: 1
997C26-3 1/2 X 3/4
RNCC: 3 | RNVC: 2
997C2G-3 1/2 X 3/4
RNCC: 3 | RNVC: 2
216600101
02162
RNCC: 3 | RNVC: 1
02160
RNCC: 3 | RNVC: 2
219055378
MDSQ31-408FP-406-TL
RNCC: 3 | RNVC: 2
200035178
10661288-011PW
RNCC: 3 | RNVC: 2
10661288
RNCC: 5 | RNVC: 1
200045982
300322-001
RNCC: 3 | RNVC: 2
300322
RNCC: 5 | RNVC: 1
219119152
1071V
RNCC: 3 | RNVC: 2
219018487
4748
RNCC: 3 | RNVC: 2
200049954
10669215-001PW
RNCC: 3 | RNVC: 2
10669215
RNCC: D | RNVC: 9
217127046
P3
RNCC: 3 | RNVC: 2
200037373
653D736-5
RNCC: 3 | RNVC: 2
218418173
676
RNCC: 3 | RNVC: 2
218916403
K510-239
RNCC: 3 | RNVC: 2
219131436
966001-01
RNCC: 3 | RNVC: 2
200068341
306643-001
RNCC: 3 | RNVC: 2
219118308
110430-101
RNCC: 3 | RNVC: 2
933760
RNCC: 6 | RNVC: 9
219080170
3513 132 7497
RNCC: 3 | RNVC: 2
200021009
GC432-0019-1
RNCC: 3 | RNVC: 2
218689517
A500C4
RNCC: 3 | RNVC: 2
69GP4TYPE402D
RNCC: 4 | RNVC: 1
200030026
0678480-1
RNCC: 3 | RNVC: 2
0678480
RNCC: 5 | RNVC: 2
219083977
CAH-126-1
RNCC: 3 | RNVC: 2
219083541
10553233
RNCC: 3 | RNVC: 2
216600907
62-4
RNCC: 3 | RNVC: 2
1077 1/4-4
RNCC: 3 | RNVC: 2
130-2544
RNCC: 6 | RNVC: 9
219083461
8762117-2
RNCC: 3 | RNVC: 2
219018240
441B26D
RNCC: 3 | RNVC: 2
200001755
9380338-1
RNCC: 3 | RNVC: 2
218657703
C9187-4
RNCC: 3 | RNVC: 2
219118315
930247HA-1
RNCC: 3 | RNVC: 2
200018016
GM3-M1126A
RNCC: 3 | RNVC: 2
219111456
3015802
RNCC: 3 | RNVC: 2
200031362
10665241-001PW
RNCC: 3 | RNVC: 2
200061355
0677866
RNCC: 3 | RNVC: 2
218525649
RU21IN
RNCC: 3 | RNVC: 2
219118279
3150
RNCC: 3 | RNVC: 2
200043236
TE20010647-100
RNCC: 3 | RNVC: 1
200062617
RB-206
RNCC: 3 | RNVC: 2
218138594
AS2295-5
RNCC: 3 | RNVC: 2
218840018
11-884-1
RNCC: 3 | RNVC: 2
200027191
C4PMK10226-3
RNCC: 3 | RNVC: 2
219111398
8040-0
RNCC: 3 | RNVC: 2
218054385
BK20186
RNCC: 3 | RNVC: 2
219111133
111462
RNCC: 3 | RNVC: 2
218898557
MH54
RNCC: 3 | RNVC: 2
200000310
10654425-011PG
RNCC: 3 | RNVC: 2
200016476
10658811-001PW
RNCC: 3 | RNVC: 2
10658811
RNCC: D | RNVC: 9
218962146
M-6214-P-005ITEM8
RNCC: 3 | RNVC: 2
200068487
10657019-001
RNCC: 3 | RNVC: 2
10657019
RNCC: D | RNVC: 9
218659895
220
RNCC: 3 | RNVC: 2
200079968
14Z-9030
RNCC: 3 | RNVC: 2
200052913
0978322
RNCC: 3 | RNVC: 2
200058087
1SI0176-610
RNCC: 3 | RNVC: 2
218743885
13R13
RNCC: 3 | RNVC: 2
T1660
RNCC: 3 | RNVC: 2
13R13
RNCC: 5 | RNVC: 2
219018210
214107
RNCC: 3 | RNVC: 2
218950133
B-167050-2
RNCC: 3 | RNVC: 2
218807993
66
RNCC: 3 | RNVC: 2
600910
RNCC: 5 | RNVC: 2
219213534
10627241
RNCC: 3 | RNVC: 2
218969748
N128533
RNCC: 3 | RNVC: 2
N128533
RNCC: 5 | RNVC: 2
218773261
32581
RNCC: 3 | RNVC: 2
218915988
429
RNCC: 3 | RNVC: 2
200055853
AC16061-05
RNCC: 3 | RNVC: 2
219215016
556833
RNCC: 3 | RNVC: 2
218470568
9496X3
RNCC: 3 | RNVC: 2
34313
RNCC: 6 | RNVC: 9
218580163
2-70218-1
RNCC: 3 | RNVC: 2
200002446
9380416-1
RNCC: 3 | RNVC: 2
219108783
8461957-2
RNCC: 3 | RNVC: 2
200002142
9380071-1
RNCC: 3 | RNVC: 2
219080258
06236452
RNCC: 3 | RNVC: 2
218633518
546-258
RNCC: 3 | RNVC: 2
219126748
DVEM23339502
RNCC: 3 | RNVC: 2
219142156
9427342-1
RNCC: 3 | RNVC: 2
219201216
DL9759127-1
RNCC: 3 | RNVC: 2
219080091
8711832-3
RNCC: 3 | RNVC: 2
219121043
9943 1177
RNCC: 3 | RNVC: 2
218898992
329309
RNCC: 3 | RNVC: 2
219080999
61500090036
RNCC: 3 | RNVC: 2
219111181
9325325
RNCC: 3 | RNVC: 2
200075733
1389031
RNCC: 3 | RNVC: 2