What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

Hardware, Commercial - Canada (CA)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Canada (CA) - NCB is 20 or 21

Page 35 of 64

NSN Format for Hardware, Commercial
Codified by Canada

53	40	21	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Canada (CA)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 190 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 63 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 26 Items
What is a Rod End Connector? 44 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 69 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 226 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 94 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 20 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 582 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 43 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 202 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 65 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Shelf Bracket? 33 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Door Hook And Eye? 22 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 77 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 12 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 23 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 23 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 44 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 13 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is a Friction Catch? 38 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 15 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 39 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 26 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 86 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 20 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 42 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 91 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 57 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 25 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 163 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 101 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 21 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 16 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 288 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 52 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 23 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 131 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 24 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 41 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 70 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 45 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 210 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 163 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 82 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 44 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 38 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 25 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 20 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 42 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 18 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Glazier Point? 10 Items: A Glazier Point (POINT,GLAZIER) is a piece of thin sheet metal, triangular or diamond shaped, designed to hold a pane of glass in a wooden sash.
What is an Angle Bracket? 1105 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 81 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 32 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1130 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 20 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 49 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 37 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Quick Release Plunger? 13 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 114 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flush Catch? 97 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 13 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 86 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 115 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 177 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 24 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 53 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 219 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 40 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 494 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 353 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 55 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 51 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 12 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 601 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 32 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 39 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 34 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 41 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 21 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping? 19 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 93 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 117 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 31 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 45 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 19 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 832 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 35 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 40 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 75 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 106 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Picture Hanger? 10 Items: A Picture Hanger (HANGER,PICTURE) is a hook like device that is secured to walls, bulkheads, columns and the like, by means of a nail, screw, magnet or adhesive backed cloth, that is included with and/or attached to the hook. It is designed to hold and suspend variuos items such as photographs, paintings, maps, documents, etc.
What is a Protection Bellows? 16 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 57 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 49 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 2535 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 19 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 16 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 1222 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 48 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 64 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Threaded Hinged Standoff? 11 Items: A Threaded Hinged Standoff (STANDOFF,HINGED,THREADED) is a standoff, internally and/or externally, threaded on both ends with a hinge or pivot point to allow for independent movement of the ends.
What is a Spacing Threaded Standoff? 178 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 115 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a Crank Handle? 13 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 29 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Mechanic Equipment Hardware Kit? 87 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Dust And Moisture Seal Protective Cover? 38 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 51 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 308 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 41 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 39 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 178 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 27 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 80 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 86 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 35 of 64

5340-21-810-4202
Rod End Clevis

218104202
41A61310: RNCC: 3 | RNVC: 2

26 Sep 1963

5340-20-003-2255
Retaining Clip

200032255
150380: RNCC: 3 | RNVC: 2

22 Feb 2007

5340-21-911-1375
Mounting Bracket

219111375
8102-82: RNCC: 3 | RNVC: 2

10 Dec 1993

5340-21-908-0255
Rod End Clevis

219080255
06356821: RNCC: 3 | RNVC: 2

26 Oct 1990

5340-20-006-6798
Crank Handle

200066798
2013070: RNCC: 3 | RNVC: 2

19 Jan 2012

5340-21-913-8770
Block Fairlead Section

219138770
215-93252-20: RNCC: 3 | RNVC: 2

11 Mar 1997

5340-21-660-1886
Turnbuckle

216601886
304: RNCC: 3 | RNVC: 1
304X3/4-6: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-660-0544
Hinged Hasp

216600544
915C2HBP-4 1/2: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-866-9178
Padlock

218669178
1S00: RNCC: 3 | RNVC: 2
003525: RNCC: 6 | RNVC: 9

16 Jun 1972

5340-21-843-6158
Swivel Caster

218436158
7696: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-884-0284
Retaining Strap

218840284
LN1508: RNCC: 3 | RNVC: 2
1IN: RNCC: 5 | RNVC: 1
1IN: RNCC: 5 | RNVC: 1

24 Dec 1980

5340-21-864-9369
General Purpose Resilient Mount

218649369
J6256: RNCC: 3 | RNVC: 2

14 Jul 1972

5340-20-000-2412
Mounting Plate

200002412
9379024-1: RNCC: 3 | RNVC: 2

21 Jun 2002

5340-21-908-4859
Access Cover

219084859
439 570: RNCC: 3 | RNVC: 2

29 Oct 1992

5340-21-905-5200
Resilient Mount

219055200
373040: RNCC: 3 | RNVC: 2

15 Oct 1988

5340-21-855-3068
Clamp

218553068
4370151: RNCC: 3 | RNVC: 2

19 Sep 1969

5340-21-895-0218
Expansion Plug

218950218
FP82X: RNCC: 3 | RNVC: 2

28 Jan 1984

5340-21-901-9015
Expansion Shield

219019015
HLD3: RNCC: 3 | RNVC: 1
63582/1: RNCC: 3 | RNVC: 2

7 May 1988

5340-21-895-0518
Butt Hinge

218950518
4381728940: RNCC: 3 | RNVC: 2

20 Feb 1984

5340-20-005-8590
Mounting Bracket

200058590
14144C-1: RNCC: 3 | RNVC: 2

1 Oct 2010

5340-21-911-9197
Angle Bracket

219119197
CF8483449: RNCC: 3 | RNVC: 2

30 Jul 1994

5340-21-660-0361
Butt Hinge

216600361
BB179CM: RNCC: 3 | RNVC: 1
FBB179C26 4X4: RNCC: 3 | RNVC: 2
FBB179C26 4X4: RNCC: 3 | RNVC: 2
69GP1: RNCC: 4 | RNVC: 1

6 Jun 1968

5340-20-002-9249
Spring Tension Clip

200029249
103865: RNCC: 3 | RNVC: 2

11 Sep 2006

5340-21-870-9544
Turnbuckle

218709544
XD4075DX: RNCC: 3 | RNVC: 2
P201464-5: RNCC: 5 | RNVC: 2

24 Mar 1976

5340-21-819-9819

5340-21-853-9850

5340-21-712-0029

5340-21-921-7420
Draw Latch

219217420
960: RNCC: 3 | RNVC: 2

6 Mar 2002

5340-21-848-0696

5340-21-844-4482

5340-21-843-6582

5340-21-920-2506
Left Hand Block

219202506
AED 69505-1: RNCC: 3 | RNVC: 2

22 Jul 1999

5340-21-878-0811
Loop Clamp

218780811
32585-6: RNCC: 3 | RNVC: 2

28 Mar 1978

5340-21-905-5922
Holder

219055922
CF 809 965 A: RNCC: 3 | RNVC: 2

10 Mar 1990

5340-21-908-4725
Retaining Strap

219084725
CF 809 781 A: RNCC: 3 | RNVC: 2

12 Sep 1992

5340-21-913-8950
Access Cover

219138950
215-40255-6: RNCC: 3 | RNVC: 2

19 Apr 1997

5340-21-908-4708
Block Clamp

219084708
CF 819 201 A: RNCC: 3 | RNVC: 2

24 Sep 1992

5340-21-908-3298
Cylinder H Retainer

219083298
6150004009: RNCC: 3 | RNVC: 2

26 Sep 1991

5340-21-908-4289
Access Door Hinge

219084289
215-33159-852: RNCC: 3 | RNVC: 2

27 May 1992

5340-20-008-0959
Mounting Bracket

200080959
0677539: RNCC: 3 | RNVC: 2

12 Nov 2013

5340-21-908-5254
Mechanic Equipment Hardware Kit

219085254
28447M: RNCC: 3 | RNVC: 2

31 Mar 1993

5340-20-006-7634
Mounting Bracket

200067634
138682-2: RNCC: 3 | RNVC: 2

28 Feb 2012

5340-21-660-2414
Key Blank

216602414
4120B: RNCC: 3 | RNVC: 2
S155 1IN.: RNCC: 3 | RNVC: 2
S155 1IN: RNCC: 3 | RNVC: 2
1224: RNCC: 3 | RNVC: 2
624: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-003-3453
Tie Down Adapter

200033453
10626916: RNCC: 3 | RNVC: 2

8 May 2007

5340-20-002-5490
Mounting Bracket

200025490
C5B111267-1: RNCC: 3 | RNVC: 2

8 Mar 2006

5340-20-005-8174
Mounting Bracket

200058174
0875438-1: RNCC: 3 | RNVC: 2

1 Sep 2010

5340-21-877-3753
Strapping

218773753
SUSPENSI0NSTRAP1-2: RNCC: 3 | RNVC: 2

8 Nov 1977

5340-21-888-7687
Swivel Caster

218887687
100X22: RNCC: 3 | RNVC: 1

27 Mar 1982

5340-21-915-0147
Mounting Bracket

219150147
10618355: RNCC: 3 | RNVC: 2

21 May 1999

5340-21-908-3567
Mounting Plate

219083567
CF346593A: RNCC: 3 | RNVC: 2

13 Dec 1991

5340-21-908-3276
Expansion Plug

219083276
900 03 98 9721: RNCC: 3 | RNVC: 2

12 Sep 1991

5340-21-879-6175
Corr Anode Assembly

218796175
1-4-6: RNCC: 3 | RNVC: 2
32017250: RNCC: 5 | RNVC: 2

19 Jun 1979

5340-21-876-2072
Rim Clenching Clamp

218762072
66238: RNCC: 3 | RNVC: 2

6 Sep 1977

5340-21-914-1558
Mounting Bracket

219141558
258321-901: RNCC: 3 | RNVC: 2

7 May 1997

5340-21-908-3995
Access Cover

219083995
10555467: RNCC: 3 | RNVC: 2

25 Mar 1992

5340-21-911-8907
Catch Strike

219118907
9265305: RNCC: 3 | RNVC: 2

11 Jun 1994

5340-21-905-5197
Swivel Caster

219055197
11-24-XD: RNCC: 3 | RNVC: 2

16 Oct 1988

5340-20-006-4685
Spring Window Bolt

200064685
099-300: RNCC: 3 | RNVC: 2

17 Aug 2011

5340-21-913-0096
Padlock

219130096
5200-KD: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-20-005-2046
Mounting Bracket

200052046
306182: RNCC: 3 | RNVC: 2

9 Dec 2009

5340-21-920-8866
Release. Bar

219208866
10639984: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-21-914-8221
Mounting Bracket

219148221
10617003: RNCC: 3 | RNVC: 2

15 Jul 1998

5340-20-005-0929
Angle Bracket

200050929
0989067: RNCC: 3 | RNVC: 2

6 Oct 2009

5340-21-913-9890
Cover Access

219139890
258804-901: RNCC: 3 | RNVC: 2

26 Jul 1997

5340-21-814-6249
Steel Hook Ferrule

218146249
AGS897D: RNCC: 3 | RNVC: 2
28H5457: RNCC: 6 | RNVC: 9

16 Jun 1972

5340-21-920-6713
Lh Assembly Hook

219206713
10638812-PG: RNCC: 3 | RNVC: 2

29 May 2000

5340-20-004-8208
Mounting Plate

200048208
543186: RNCC: 3 | RNVC: 2

19 May 2009

5340-21-888-1641
Extension Drawer Slide Section

218881641
T335006502: RNCC: 3 | RNVC: 2

12 Feb 1982

5340-20-006-4031
Mounting Bracket

200064031
B19264-BK: RNCC: 3 | RNVC: 2

6 Jul 2011

5340-21-911-8292
Thumb Latch

219118292
2200: RNCC: 3 | RNVC: 2

20 Apr 1994

5340-21-870-9437
Antipilferage Seal

218709437
43: RNCC: 3 | RNVC: 2

9 Dec 1975

5340-21-912-6779
Spacing Threaded Standoff

219126779
8860878-3: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-21-840-8565
Retaining Strap

5 Jun 1968

5340-21-908-3369
Protection Bellows

219083369
323002: RNCC: 3 | RNVC: 2

11 Oct 1991

5340-20-002-2331
Spring Holder

200022331
1723A65: RNCC: 3 | RNVC: 2

30 Aug 2005

5340-21-820-8531

5340-21-813-0271

5340-20-006-3783
Support Hook

200063783
1003314: RNCC: 3 | RNVC: 2
1003314: RNCC: 3 | RNVC: 9

23 Jun 2011

5340-21-844-1227
Grooved Clamp Coupling

218441227
B55C46: RNCC: 3 | RNVC: 2

19 Apr 1967

5340-21-895-0917
Swivel Caster

218950917
427-4SBRZC: RNCC: 3 | RNVC: 2
282-2: RNCC: 5 | RNVC: 2

15 Apr 1984

5340-21-860-6893
Storm Door Check

218606893
90: RNCC: 3 | RNVC: 2

17 Dec 1970

5340-21-868-9227
Caste Fork And Stem

218689227
1254-34: RNCC: 3 | RNVC: 2

10 Apr 1974

5340-21-891-6761
Spring Tension Clip

218916761
3983067: RNCC: 3 | RNVC: 2
3989067: RNCC: 3 | RNVC: 2

18 Jun 1983

5340-21-908-0467
Double Angle Bracket

219080467
10511341: RNCC: 3 | RNVC: 2

9 Jan 1991

5340-21-819-8230
Door Handle

218198230
AR32DTYPE1: RNCC: 3 | RNVC: 2

1 Mar 1965

5340-21-888-1306
Door Knob Spindle

218881306
0-0: RNCC: 3 | RNVC: 1

24 Jan 1982

5340-21-921-0139
Mounting Plate

219210139
9878180-1: RNCC: 3 | RNVC: 2

26 Jan 2001

5340-20-007-3809
Mechanical Stop

200073809
10638444: RNCC: 3 | RNVC: 2

11 Jan 2013

5340-20-003-5363
Mounting Bracket

200035363
10642796: RNCC: 3 | RNVC: 2

22 Aug 2007

5340-21-877-3714
Retaining Strap

218773714
316: RNCC: 3 | RNVC: 2

31 Oct 1977

5340-21-905-5771
Threaded Rod End

219055771
8777516-1: RNCC: 3 | RNVC: 2

15 Nov 1989

5340-20-006-0027
Mounting Plate

200060027
1025476-1: RNCC: 3 | RNVC: 2

17 Dec 2010

5340-20-000-2486
Angle Bracket

200002486
9379542-1: RNCC: 3 | RNVC: 2

26 Jun 2002

5340-20-006-7736
Mounting Plate

200067736
1276001-1: RNCC: 3 | RNVC: 2

6 Mar 2012

5340-20-002-6809
Angle Bracket

200026809
130014DE293-1: RNCC: 3 | RNVC: 2

11 May 2006

5340-20-005-1128
Shr Support Segment

200051128
PWC50005: RNCC: 3 | RNVC: 2

19 Oct 2009

5340-20-005-0237
Mounting Bracket

200050237
23706: RNCC: 3 | RNVC: 2

28 Aug 2009

5340-21-847-5495
Cap

218475495
8-41517-1: RNCC: 3 | RNVC: 2

16 Aug 1967

5340-21-905-5544
Loop Clamp

219055544
Q 314 176 121: RNCC: 3 | RNVC: 2

13 May 1989

5340-20-005-9053
Double Angle Bracket

200059053
0677611-1: RNCC: 3 | RNVC: 2

8 Nov 2010

5340-21-819-2103

5340-20-000-2322
Mounting Bracket

200002322
9379565-1: RNCC: 3 | RNVC: 2

19 Jun 2002

5340-21-920-7195
Mounting Plate

219207195
8762348-1: RNCC: 3 | RNVC: 2

20 Jul 2000

5340-21-887-8267

5340-21-884-0317
Window Regulator Handle

218840317
396Z69RH: RNCC: 3 | RNVC: 2

24 Dec 1980

5340-21-897-8077

5340-21-859-1816
Corner Brace

218591816
1423D: RNCC: 3 | RNVC: 2

18 Jun 1970

5340-21-914-2757
Rod End Clevis

219142757
WW404940A: RNCC: 3 | RNVC: 2

15 Jul 1997

5340-21-870-9101
Turnbuckle Body

218709101
538010: RNCC: 3 | RNVC: 2

6 May 1975

5340-21-877-3377
Expansion Plug

218773377
31555: RNCC: 3 | RNVC: 2

18 Oct 1977

5340-21-897-8647
Rod End Clevis

218978647
81002635: RNCC: 3 | RNVC: 2
8282081: RNCC: 3 | RNVC: 2

14 Feb 1985

5340-20-005-0335
Mounting Plate

200050335
23704: RNCC: 3 | RNVC: 2

3 Sep 2009

5340-21-912-6705
Access Door

219126705
60205415: RNCC: 3 | RNVC: 2

28 Jul 1995

5340-21-857-8014
Casement Fastener

218578014
SB771: RNCC: 3 | RNVC: 1

12 Feb 1970

5340-21-908-4491
Picture Hanger

219084491
EODC: RNCC: 3 | RNVC: 2

25 Jul 1992

5340-21-865-1767

5340-21-818-6175

5340-21-814-7171

5340-21-847-3490
Mounting Plate

218473490
104382: RNCC: 3 | RNVC: 2

16 Aug 1967

5340-21-884-0068
Electrical-Mechanical Equipment Post

218840068
46-54427-98: RNCC: 3 | RNVC: 2

13 Nov 1980

5340-21-816-8735

5340-21-847-3547
Electrical-Mechanical Equipment Post

218473547
104872: RNCC: 3 | RNVC: 2

16 Aug 1967

5340-21-660-1029
Doorstop

216601029
601: RNCC: 3 | RNVC: 2
231B: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-007-8491
Mounting Plate

200078491
637150: RNCC: 3 | RNVC: 2

26 Aug 2013

5340-21-660-1037
Sliding Door Hanger

216601037
843: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-910-8789
Guide Hinge

219108789
8461998-2: RNCC: 3 | RNVC: 2

9 Jul 1993

5340-20-007-0936
Mounting Bracket

200070936
1176806: RNCC: 1 | RNVC: 2
04750: RNCC: 3 | RNVC: 2
2037-558: RNCC: 5 | RNVC: 2

20 Aug 2012

5340-20-002-4983
Mounting Bracket

200024983
HXE-2010M: RNCC: 3 | RNVC: 2

7 Feb 2006

5340-21-114-8745

5340-21-860-5592
Butt Hinge

218605592
184: RNCC: 3 | RNVC: 1
184 4X2: RNCC: 3 | RNVC: 2

15 Oct 1970

5340-21-860-9892
Screw Thread Insert

218609892
MS51991E107: RNCC: 2 | RNVC: 2

13 May 1971

5340-20-003-7390
Rack Assembly

200037390
541882: RNCC: 3 | RNVC: 2

19 Nov 2007

5340-20-000-4814
Mounting Bracket

200004814
10608785: RNCC: 3 | RNVC: 2

24 Oct 2002

5340-20-002-4558
Mounting Plate

200024558
130014DE811-1: RNCC: 3 | RNVC: 2

12 Jan 2006

5340-20-002-8469
Retaining Strap

200028469
C4V1477-1: RNCC: 3 | RNVC: 2

20 Jul 2006

5340-21-604-8867
Spacing Threaded Standoff

216048867
21-604-8867: RNCC: 3 | RNVC: 2
21-604-8867: RNCC: 5 | RNVC: 2

5 Jun 1968

5340-20-000-8479
Crash Bar Assy

200008479
0175186-100: RNCC: 3 | RNVC: 2

18 Jun 2003

5340-21-896-9566
Friction Catch

218969566
5028-2: RNCC: 3 | RNVC: 2

23 Sep 1984

5340-21-911-8291
Mortise Latch

219118291
6650: RNCC: 3 | RNVC: 2

20 Apr 1994

5340-21-866-9111
Swivel Caster

218669111
9404X61: RNCC: 3 | RNVC: 2

16 Jun 1972

5340-20-008-0318
Mounting Bracket

200080318
9378503-1: RNCC: 3 | RNVC: 2

21 Oct 2013

5340-21-914-9183
Access Cover

219149183
10556812: RNCC: 3 | RNVC: 2

17 Oct 1998

5340-21-893-8375
General Purpose Resilient Mount

218938375
636-1-9028: RNCC: 3 | RNVC: 2

11 Nov 1983

5340-21-912-9718
Padlock

219129718
20SP: RNCC: 3 | RNVC: 2

5 Jan 1996

5340-21-914-8224
Headless Straight Rod

219148224
10616987: RNCC: 3 | RNVC: 2

15 Jul 1998

5340-21-884-0699
Door Knob Spindle

218840699
1177: RNCC: 3 | RNVC: 1
1177 X 3/4 X 5 1/4: RNCC: 3 | RNVC: 2

31 Mar 1981

5340-21-920-3865
Radio Guide

219203865
9383426-1: RNCC: 3 | RNVC: 2

2 Nov 1999

5340-21-866-9229
Expansion Shield

218669229
3625-2: RNCC: 3 | RNVC: 2

14 Jul 1972

5340-21-884-0398
Electrical-Mechanical Equipment Post

218840398
2557338-2: RNCC: 3 | RNVC: 2

20 Jan 1981

5340-21-866-9666
Angle Bracket

218669666
B45798: RNCC: 3 | RNVC: 2

14 Jul 1972

5340-20-000-8662
Threaded Rod

200008662
2062603111025: RNCC: 3 | RNVC: 2

2 Jul 2003

5340-21-908-0100
Nonmetallic Bumper

219080100
CF 819 418 A: RNCC: 3 | RNVC: 2

28 Jul 1990

5340-21-913-1247
Catch Strike

219131247
9578111-2: RNCC: 3 | RNVC: 2

15 Sep 1996

5340-21-914-1597
Plate Keeper

219141597
140336-1: RNCC: 3 | RNVC: 2

12 Jun 1997

5340-21-660-1382
Rope Cleat

216601382
401: RNCC: 3 | RNVC: 1
401S-4: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-816-8733
Turnbuckle

218168733
1R25116: RNCC: 3 | RNVC: 2

28 Aug 1964

5340-21-911-9582
Dust And Moisture Seal Protective Plug

219119582
PK1599: RNCC: 3 | RNVC: 2

22 Oct 1994

5340-21-111-0177
Webbing Strap

211110177
3001613: RNCC: 3 | RNVC: 2
3001496: RNCC: 5 | RNVC: 1

6 Jun 1968

5340-20-006-0770
Mechanic Equipment Hardware Kit

200060770
1SI0058-70: RNCC: 3 | RNVC: 2

25 Jan 2011

5340-21-805-5169
Dust And Moisture Seal Protective Cap

218055169
BK22688: RNCC: 3 | RNVC: 2

1 Dec 1968

5340-21-879-5971
Bottom Hinge

218795971
82045-1: RNCC: 3 | RNVC: 2

24 Apr 1979

5340-21-863-3486
Door Closer Bracket

218633486
128B: RNCC: 3 | RNVC: 2
130-3718: RNCC: 6 | RNVC: 9

18 Nov 1971

5340-21-537-0072

5340-21-908-3288
Access Cover

219083288
180 0 21 0011: RNCC: 3 | RNVC: 2

12 Sep 1991

5340-20-002-9107
Hook Wire

200029107
1003: RNCC: 3 | RNVC: 2

6 Sep 2006

5340-21-660-1403

5340-21-868-8250
Butt Hinge

218688250
BB241F: RNCC: 3 | RNVC: 1
BB1041F: RNCC: 3 | RNVC: 1
BB241C4 4 X 4: RNCC: 3 | RNVC: 2
131-4638: RNCC: 6 | RNVC: 9

15 Feb 1973

5340-20-005-0959
Mounting Bracket

200050959
10628656: RNCC: 3 | RNVC: 2

7 Oct 2009

5340-20-002-8468
Access Cover

200028468
C4B1941-1: RNCC: 3 | RNVC: 2

20 Jul 2006

5340-21-813-8907
Resilient Mount

218138907
22-825: RNCC: 3 | RNVC: 2

13 Jun 1964

5340-21-901-8138
Rod End

219018138
700907: RNCC: 3 | RNVC: 2

3 Jun 1986

5340-21-809-9618
Cap

218099618
41A97204: RNCC: 3 | RNVC: 2

30 Aug 1963

5340-21-921-5109
Anchor Plate

219215109
557234: RNCC: 3 | RNVC: 2

18 Dec 2001

5340-21-660-0752
Bow Handle

216600752
1077: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-000-1933
Webbing Strap

200001933
9379297-1: RNCC: 3 | RNVC: 2

5 Jun 2002

5340-20-004-0209
Mounting Bracket

200040209
0377282-1: RNCC: 3 | RNVC: 2

8 Apr 2008

5340-20-001-4744
Block

200014744
10640086: RNCC: 3 | RNVC: 2

3 Jun 2004

5340-20-003-1909
Mounting Bracket

200031909
541306: RNCC: 3 | RNVC: 2
5413006: RNCC: 5 | RNVC: 2

6 Feb 2007

5340-21-809-1438

5340-21-921-2711
Dust And Moisture Seal Protective Cap

219212711
PK3640: RNCC: 3 | RNVC: 2

9 Aug 2001

5340-20-002-7196
Doorstop

200027196
C4F1855-1: RNCC: 3 | RNVC: 2

26 May 2006

5340-21-660-1881
Turnbuckle

216601881
304: RNCC: 3 | RNVC: 1
304X1/2-6: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-857-9235
Antipilferage Seal

218579235
PR1035: RNCC: 3 | RNVC: 1
PR1035: RNCC: 3 | RNVC: 1
PR0NGL0K4: RNCC: 5 | RNVC: 1

16 Apr 1970

5340-21-103-5715
Tripod Handle

211035715
440: RNCC: 3 | RNVC: 2
503388: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-000-4650
Mounting Plate

200004650
10618311: RNCC: 3 | RNVC: 2

16 Oct 2002

5340-21-905-5921
Holder

219055921
CF 809 963 A: RNCC: 3 | RNVC: 2

10 Mar 1990

5340-21-895-0627
Angle Bracket

218950627
15259-1: RNCC: 3 | RNVC: 2
N15259-1: RNCC: 3 | RNVC: 2

11 Mar 1984

5340-21-868-9219
Caster Wheel

218689219
1254-38A: RNCC: 3 | RNVC: 2
1-2-55: RNCC: 5 | RNVC: 2

10 Apr 1974

5340-20-006-9411
Catch Strike

200069411
10652709-9: RNCC: 3 | RNVC: 2

7 Jun 2012

5340-21-311-9634
Retaining Strap

213119634
J867-2: RNCC: 3 | RNVC: 1
14M8-2: RNCC: 3 | RNVC: 2
14M8-2: RNCC: 3 | RNVC: 2
14M8-2: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-860-5367
Butt Hinge

218605367
BB179: RNCC: 3 | RNVC: 1
FBB179-4: RNCC: 3 | RNVC: 1
FBB179CP-4: RNCC: 3 | RNVC: 2

15 Oct 1970

5340-21-870-9891

5340-21-880-7822
Antipilferage Seal

218807822
PR1035: RNCC: 3 | RNVC: 1
PR0NGL0K4: RNCC: 5 | RNVC: 1

19 Mar 1980

5340-20-002-7523
Access Cover

200027523
PWC37577: RNCC: 3 | RNVC: 2

5 Jun 2006

5340-21-920-5745
Bracket Assembly

219205745
10617232: RNCC: 3 | RNVC: 2

27 Mar 2000

5340-21-868-8649
Extension Drawer Slide Section

218688649
110QDP14B1: RNCC: 3 | RNVC: 2

28 Nov 1973

5340-21-913-0093
Loop Clamp

219130093
259897: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-21-911-8285
Elastic Strap

219118285
99-0164: RNCC: 3 | RNVC: 2

23 Apr 1994

5340-21-921-4167
Mounting Bracket

219214167
A22200-0056-4: RNCC: 3 | RNVC: 2

6 Nov 2001

5340-21-898-4699
Nut And Bolt Retainer

218984699
6886720: RNCC: 3 | RNVC: 2

20 Aug 1985

5340-20-006-9636
Manual Control Lever

200069636
35426SP: RNCC: 3 | RNVC: 2
35426: RNCC: 3 | RNVC: 9

15 Jun 2012

5340-21-808-7170
Filler Opening Cap

218087170
41A75257-2: RNCC: 3 | RNVC: 2

19 May 1967

5340-21-897-8434
Anode Retaining Plug

218978434
C83209: RNCC: 3 | RNVC: 2

10 Jan 1985

5340-20-005-1125
Disc-Turbin Adapter

200051125
PWC71489: RNCC: 3 | RNVC: 2

19 Oct 2009

5340-21-903-9398
Mounting Bracket

219039398
8577178-1: RNCC: 3 | RNVC: 2

8 Dec 1987

5340-20-004-0410
Mounting Plate

200040410
9283387-2: RNCC: 3 | RNVC: 2

17 Apr 2008

5340-21-921-4870
Bracket Assembly.

5340-21-879-5960

5340-20-003-1638
Mounting Plate

200031638
308826: RNCC: 3 | RNVC: 2

18 Jan 2007

5340-21-920-6915
Valve Actuator Guard

219206915
10638693: RNCC: 3 | RNVC: 2

20 Jun 2000

5340-21-891-5664
Seat Ball

218915664
8280591: RNCC: 3 | RNVC: 2
7042D: RNCC: 3 | RNVC: 2
16908002600: RNCC: 5 | RNVC: 2

22 Jan 1983

5340-21-887-8315
Retaining Strap

218878315
1310: RNCC: 3 | RNVC: 2

12 Dec 1981

5340-21-913-1382
Spring Tension Clip

219131382
9475523: RNCC: 3 | RNVC: 2

2 Jun 1996

5340-21-866-9685
Assortment Hardware

218669685
H2000F: RNCC: 3 | RNVC: 2

18 Aug 1972

5340-21-908-0384
Angle Bracket

219080384
431038: RNCC: 3 | RNVC: 2

12 Jan 1991

5340-20-006-3620
Paper Clamp

200063620
4467: RNCC: 3 | RNVC: 2

20 Jun 2011

5340-21-879-5295
Rim Clenching Clamp

218795295
604026: RNCC: 3 | RNVC: 2
604026: RNCC: 3 | RNVC: 2

11 Jul 1978

5340-20-001-6992
Angle Bracket

200016992
10617054: RNCC: 3 | RNVC: 2

4 Nov 2004

5340-21-905-5259
Rim Lock

219055259
8555 COM: RNCC: 3 | RNVC: 2
8555MP: RNCC: 3 | RNVC: 2

28 Oct 1988

5340-20-005-6956
Mounting Plate

200056956
1SI0176-310: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-21-840-8927
Butt Hinge

218408927
BB241F: RNCC: 3 | RNVC: 1
BB241C4-4 1/2 X 4 1/2: RNCC: 3 | RNVC: 2
BB241C4-4 1/2 X 4 1/2: RNCC: 3 | RNVC: 2
69GP1TYPES211: RNCC: 5 | RNVC: 2

6 Jun 1968

5340-21-905-5581
Angle Bracket

219055581
53/3182: RNCC: 3 | RNVC: 2

30 May 1989

5340-20-007-2183
Lever Bracket

200072183
85770020-101: RNCC: 3 | RNVC: 2

23 Oct 2012

5340-21-660-2104
Padlock

216602104
870: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-006-3882
Double Angle Bracket

200063882
85312344-101: RNCC: 3 | RNVC: 2

28 Jun 2011

5340-21-901-8409
Loop Clamp

219018409
69090: RNCC: 3 | RNVC: 2

13 Jan 1987

5340-20-003-0598
Mounting Bracket

200030598
C91001-335-1: RNCC: 3 | RNVC: 2

1 Dec 2006

5340-21-660-2141
Lock Cylinder

216602141
253-C10-1 1/2: RNCC: 3 | RNVC: 2
253-C10-1 1/2: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-913-4829
Retai Clip Assembly

219134829
DL-9659161-1: RNCC: 3 | RNVC: 2

16 Nov 1996

5340-20-006-1855
Angle Bracket

200061855
10673396-001: RNCC: 3 | RNVC: 2

18 Mar 2011

5340-21-896-9974
Electrical-Mechanical Equipment Post

218969974
141-924: RNCC: 3 | RNVC: 2

19 Nov 1984

5340-21-660-2110
Padlock

216602110
C105P: RNCC: 3 | RNVC: 2

26 Nov 1965

5340-21-901-8318
Door Holder

219018318
GJ120: RNCC: 3 | RNVC: 2

29 Oct 1986

5340-21-914-1099
Access Cover

219141099
WW223321AX: RNCC: 3 | RNVC: 2
591.29.18.A: RNCC: 5 | RNVC: 2

26 Jun 1997

5340-21-905-5525
Hinge

219055525
CF 349 743 A: RNCC: 3 | RNVC: 2

6 May 1989

5340-20-000-1838
Angle Bracket

200001838
9379550-1: RNCC: 3 | RNVC: 2

3 Jun 2002

5340-21-901-8720
Clamping Catch

219018720
71446-1: RNCC: 3 | RNVC: 2

10 Aug 1987

5340-21-913-8853
Mounting Bracket

219138853
9575845-1: RNCC: 3 | RNVC: 2

13 Mar 1997

5340-21-888-8418
Hinged Hasp

218888418
883XC: RNCC: 3 | RNVC: 2
883: RNCC: 5 | RNVC: 1

26 Apr 1982

5340-21-897-8306
Mounting Bracket

218978306
8477159-1: RNCC: 3 | RNVC: 2
J56-094-0: RNCC: 5 | RNVC: 2

18 Dec 1984

5340-21-866-9954
Loop Clamp

218669954
MS27405T18: RNCC: 2 | RNVC: 2

20 Oct 1972

5340-21-920-0323
Double Angle Bracket

219200323
10607175: RNCC: 3 | RNVC: 2

17 Mar 1999

5340-21-908-0227
Loop Clamp

219080227
06331691: RNCC: 3 | RNVC: 2
01132161: RNCC: 7 | RNVC: 1

18 Oct 1990

5340-20-003-8461
Mounting Plate

200038461
0678242-1: RNCC: 3 | RNVC: 2

16 Jan 2008

5340-21-913-0779
Backing Plate

219130779
CF 494 878 A: RNCC: 3 | RNVC: 2

12 Apr 1996

5340-21-913-0013
Bow Handle

219130013
1107-49: RNCC: 3 | RNVC: 2

22 Mar 1996

5340-20-003-0757
Mounting Bracket

200030757
C91001-624-1: RNCC: 3 | RNVC: 2

6 Dec 2006

5340-20-000-4632
Angle Bracket

200004632
3026664: RNCC: 3 | RNVC: 2

16 Oct 2002

5340-21-897-8520
Swivel Caster

218978520
9304: RNCC: 3 | RNVC: 2
PPL2502BB: RNCC: 3 | RNVC: 2

25 Jan 1985

5340-20-005-8685
Mounting Bracket

200058685
1079909-1: RNCC: 3 | RNVC: 2

13 Oct 2010

5340-21-876-8251
Clamp Assembly Rear

218768251
683062R91: RNCC: 3 | RNVC: 2

6 Sep 1977

5340-21-913-4256
Access Cover

219134256
10618177: RNCC: 3 | RNVC: 2

3 Mar 1998

5340-21-896-9713
Expansion Shield

218969713
6730-3/16S: RNCC: 3 | RNVC: 2

7 Oct 1984

5340-21-660-1672
Expansion Shield

216601672
1835: RNCC: 3 | RNVC: 2
1835-00300: RNCC: 3 | RNVC: 2
1059: RNCC: 3 | RNVC: 2
1835: RNCC: 3 | RNVC: 2
1835-00300: RNCC: 3 | RNVC: 2
1835-3: RNCC: 3 | RNVC: 2
1835: RNCC: 3 | RNVC: 2
115-0088: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-005-9551
Mounting Bracket

200059551
1SI0148-8400: RNCC: 3 | RNVC: 2

2 Dec 2010

5340-21-884-0951
Vent Plug

218840951
2420: RNCC: 3 | RNVC: 2

26 May 1981

5340-20-004-2605
Evaporator Housing

200042605
10556205-200: RNCC: 3 | RNVC: 2

26 Aug 2008

5340-21-107-4398
Butt Hinge Leaf

211074398
MT45: RNCC: 3 | RNVC: 2
7339394: RNCC: 5 | RNVC: 2

6 Jun 1968

5340-21-874-3907
Nonmetallic Bumper

218743907
4181: RNCC: 3 | RNVC: 2

19 Apr 1977

5340-21-908-4780
Mounting Plate

219084780
CF 819 623 A: RNCC: 3 | RNVC: 2

8 Oct 1992

5340-21-914-9132
Blanking Cap Assemb

219149132
334-42: RNCC: 3 | RNVC: 2
334-42: RNCC: 5 | RNVC: 2

10 Sep 1998

5340-21-855-2145

5340-20-002-7535
Access Cover

200027535
PWC38175: RNCC: 3 | RNVC: 2

5 Jun 2006

5340-21-868-9045
Door Closer

218689045
306627: RNCC: 3 | RNVC: 2

31 Dec 1973

5340-21-112-1617
Spring Tension Clip

211121617
110432: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-005-4070
Manual Control Lever

200054070
AM128664: RNCC: 3 | RNVC: 2

24 Mar 2010

5340-21-913-0780
Synchro Clamp

219130780
CF 816 926 A: RNCC: 3 | RNVC: 2
59.41.003.A: RNCC: 5 | RNVC: 2

12 Apr 1996

5340-20-005-3826
Double Angle Bracket

200053826
0989061-1: RNCC: 3 | RNVC: 2

8 Mar 2010

5340-20-006-9555
Butt Hinge

200069555
10652709-4: RNCC: 3 | RNVC: 2

12 Jun 2012

5340-21-914-1594
Loop Clamp

219141594
NO12: RNCC: 3 | RNVC: 2
NSV 350 27: RNCC: 5 | RNVC: 2

7 Jun 1997

5340-21-905-5901
Access Cover

219055901
CF809063AE: RNCC: 3 | RNVC: 2

3 Mar 1990

5340-21-908-0605
Detent Plunger

219080605
06264938: RNCC: 3 | RNVC: 2

20 Feb 1991

5340-21-891-5307
Clamping Catch

218915307
M2442005: RNCC: 3 | RNVC: 2
M2442005: RNCC: 3 | RNVC: 2

21 Jan 1983

5340-20-003-8068
Mrv Bow

200038068
0777247: RNCC: 3 | RNVC: 2

24 Dec 2007

5340-21-888-8289
Swivel Caster

218888289
16-65-XD: RNCC: 3 | RNVC: 2

17 Apr 1982

5340-20-000-4526
Clamping Catch

200004526
10657055-011: RNCC: 3 | RNVC: 2
10657055: RNCC: D | RNVC: 9

10 Oct 2002

5340-21-819-3230

5340-21-660-2206
Pawl Fastener

216602206
15751XC4L: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-868-8469
Insert

218688469
7029261P001: RNCC: 3 | RNVC: 2

14 Jun 1973

5340-21-860-5046
Electrical-Mechanical Equipment Post

218605046
190-772: RNCC: 3 | RNVC: 2

15 Oct 1970

5340-21-891-5272
Hardware Kit

218915272
79010: RNCC: 3 | RNVC: 2

4 Dec 1982

5340-21-891-5653
Bracket

218915653
230549: RNCC: 3 | RNVC: 2
16904003500: RNCC: 5 | RNVC: 2

22 Jan 1983

5340-20-007-9769
Mounting Bracket

200079769
0878200-1: RNCC: 3 | RNVC: 2

3 Oct 2013

5340-21-809-4151
Barrel Rod

218094151
41A90664: RNCC: 3 | RNVC: 2

30 Aug 1963

5340-21-879-5288
Door Closer

218795288
20-330: RNCC: 3 | RNVC: 1

18 Jul 1978

5340-21-908-0645
Doorstop

219080645
10553555: RNCC: 3 | RNVC: 2

8 Mar 1991

5340-21-908-4326
Cap

219084326
PK246: RNCC: 3 | RNVC: 2

24 Jun 1992

5340-21-908-0692
Strike

219080692
10503534: RNCC: 3 | RNVC: 2

6 Apr 1991

5340-20-007-4567
Retaining Clip

200074567
15262: RNCC: 3 | RNVC: 2

11 Feb 2013

5340-21-893-8974
Angle Bracket

218938974
391711: RNCC: 3 | RNVC: 2

10 Dec 1983

5340-21-660-1226
Clothes Hangar Bar

216601226
7800 30 IN: RNCC: 3 | RNVC: 2
7800 30IN: RNCC: 5 | RNVC: 2

6 Jun 1968

5340-20-003-9362
Hinge Torsion Bar

200039362
10639019: RNCC: 3 | RNVC: 2

5 Mar 2008

5340-20-000-9264
Mounting Bracket

200009264
10626392-PEW: RNCC: 3 | RNVC: 2

6 Aug 2003

5340-21-914-8610
Clevis

219148610
1237-225-1: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-20-006-9995
Turnbuckle

200069995
2920 1024: RNCC: 3 | RNVC: 2
006573: RNCC: 5 | RNVC: 2

5 Jul 2012

5340-21-879-5107
Expansion Plug

218795107
31572: RNCC: 3 | RNVC: 1

9 May 1978

5340-21-908-0217
Extension Drawer Slide

219080217
3513 172 2012: RNCC: 3 | RNVC: 2

16 Oct 1990

5340-20-006-0955
Bumper

200060955
0656-033509-03: RNCC: 3 | RNVC: 2

7 Feb 2011

5340-21-311-8633

5340-21-860-3281
Seal Retaining Plate

218603281
3019927: RNCC: 3 | RNVC: 2

15 Apr 1971

5340-21-913-8953
Mounting Plate

219138953
9740004-1: RNCC: 3 | RNVC: 2

24 Apr 1997

5340-20-000-2526
Webbing Strap

200002526
9379297-2: RNCC: 3 | RNVC: 2

27 Jun 2002

5340-21-884-0188
Tee Hinge

218840188
118: RNCC: 3 | RNVC: 2

3 Dec 1980

5340-21-913-8809
Block Clamp

219138809
215P-75143: RNCC: 3 | RNVC: 2

6 May 1997

5340-21-920-9198
Block Clamp

219209198
193-83017-1: RNCC: 3 | RNVC: 2

21 Nov 2000

5340-21-660-0894
Barrel Bolt

216600894
SC1078: RNCC: 3 | RNVC: 1
SC1078C1B-6: RNCC: 3 | RNVC: 2
SC1078J-6: RNCC: 3 | RNVC: 2
130-2526: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-000-2520
Webbing Strap

200002520
9379370-1: RNCC: 3 | RNVC: 2

27 Jun 2002

5340-21-921-0122
Mounting Plate

219210122
9878209-1: RNCC: 3 | RNVC: 2

26 Jan 2001

5340-21-660-0502
Hinged Hasp

216600502
03002: RNCC: 3 | RNVC: 2
803: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-660-1583
Poker

216601583
1562: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-001-4891
Manual Control Lever

200014891
6366396: RNCC: 3 | RNVC: 2

16 Jun 2004

5340-21-843-7664
Spring Tension Clip

218437664
A369944: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-003-4037
Webbing Strap

200034037
2108-A12: RNCC: 3 | RNVC: 2

14 Jun 2007

5340-20-000-1247
Mounting Plate

200001247
9379444-1: RNCC: 3 | RNVC: 2

9 May 2002

5340-21-914-2616
Angle Bracket

219142616
WW358320: RNCC: 3 | RNVC: 2
59.32.059.A: RNCC: 5 | RNVC: 2

9 Jul 1997

5340-20-000-3978
Access Cover

200003978
10607390: RNCC: 3 | RNVC: 2

13 Sep 2002

5340-21-815-1897
Electrical-Mechanical Equipment Post

218151897
18080: RNCC: 3 | RNVC: 2

9 Jun 1964

5340-21-905-5288
Electrical-Mechanical Equipment Post

219055288
WL421112AU: RNCC: 3 | RNVC: 2

20 Nov 1988

5340-21-891-6376
Loop Clamp

218916376
35343: RNCC: 3 | RNVC: 2
UC14X: RNCC: 3 | RNVC: 2

2 Apr 1983

5340-21-879-5258
Door Closer

218795258
20-330NH: RNCC: 3 | RNVC: 1

4 Jul 1978

5340-21-905-5558
Loop Clamp

219055558
CF 814 554A: RNCC: 3 | RNVC: 2

16 May 1989

5340-21-920-1918
Mounting Bracket

219201918
10617697-2: RNCC: 3 | RNVC: 2

11 Jun 1999

5340-21-911-1437
Protection Bellows

219111437
109478: RNCC: 3 | RNVC: 2
126837: RNCC: 5 | RNVC: 2

1 Feb 1994

5340-21-908-0589
Access Door

219080589
01154486: RNCC: 3 | RNVC: 2

6 Feb 1991

5340-21-911-1396
Mounting Bracket

219111396
8038-0: RNCC: 3 | RNVC: 2

10 Dec 1993

5340-21-891-6826
Bracket

218916826
347641: RNCC: 3 | RNVC: 2

18 Jun 1983

5340-20-003-7376
Deadbolt

200037376
10651398: RNCC: 3 | RNVC: 2

19 Nov 2007

5340-21-660-2261
Corrosion Preventive Anode

216602261
MILA18001ECLASS2TYPEZRN: RNCC: 4 | RNVC: 1

30 Nov 1965

5340-21-857-7859

5340-21-908-0622
Blank Panel

219080622
214917-4: RNCC: 3 | RNVC: 2

20 Mar 1991

5340-20-003-0532
Mechanic Equipment Hardware Kit

200030532
1SI0148-30: RNCC: 3 | RNVC: 2

29 Nov 2006

5340-21-901-8111
Corrosion Preventive Anode

219018111
CMC 14: RNCC: 3 | RNVC: 2

3 May 1986

5340-21-901-8084
Mounting Plate

219018084
453 8275-801: RNCC: 3 | RNVC: 2

23 Apr 1986

5340-21-841-8178
Snap Hook

218418178
RC410: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-877-3388
Expansion Plug

218773388
31562: RNCC: 3 | RNVC: 2

18 Oct 1977

5340-21-891-6690
Slats Fastener

218916690
FASTENER/SDSF: RNCC: 3 | RNVC: 2

4 Jun 1983

5340-20-004-6980
Guard

200046980
10618845: RNCC: 3 | RNVC: 2

24 Mar 2009

5340-20-004-9848
Mounting Plate

200049848
626-800759-VAR: RNCC: 3 | RNVC: 2

28 Jul 2009

5340-21-913-0841
Loop Clamp

219130841
CA1 10 043 001: RNCC: 3 | RNVC: 2

4 May 1996

5340-21-920-0400
Angle Bracket

219200400
10607002-2: RNCC: 3 | RNVC: 2

19 Mar 1999

5340-21-914-2762
Angle Bracket

219142762
WW321523A: RNCC: 3 | RNVC: 2
59.24.053.A: RNCC: 5 | RNVC: 2

16 Jul 1997

5340-20-006-8445
Mounting Bracket

200068445
215T17062-4: RNCC: 3 | RNVC: 2
D0931311481: RNCC: 5 | RNVC: 2

16 Apr 2012

5340-20-005-8178
Mounting Bracket

200058178
0875455-1: RNCC: 3 | RNVC: 2

2 Sep 2010

5340-21-660-0200
Butt Hinge

216600200
2503E64: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-906-3140
Dust And Moisture Seal Boot

219063140
681 27 244: RNCC: 3 | RNVC: 2

14 Sep 1989

5340-21-908-4720
Mounting Plate

219084720
CF 407 374: RNCC: 3 | RNVC: 2

12 Sep 1992

5340-20-006-1949
Shimmy Damper

200061949
3043EC: RNCC: 3 | RNVC: 2

23 Mar 2011

5340-21-908-0251
Plain Solid Disk

219080251
06259744: RNCC: 3 | RNVC: 2

25 Oct 1990

5340-21-860-5698
Butt Hinge

218605698
700C: RNCC: 3 | RNVC: 2

15 Oct 1970

5340-21-912-6724
Buckle

219126724
WW 493 165 A: RNCC: 3 | RNVC: 2

3 Aug 1995

5340-20-003-8160
Assembly Support

200038160
0078333-1: RNCC: 3 | RNVC: 2

3 Jan 2008

5340-20-006-6791
Mounting Bracket

200066791
0677865-2: RNCC: 3 | RNVC: 2

19 Jan 2012

5340-21-805-3254

5340-20-003-5345
Mounting Bracket

200035345
10642690-PW: RNCC: 3 | RNVC: 2
10642690: RNCC: 5 | RNVC: 1

21 Aug 2007

5340-21-805-3252

5340-20-003-9308
Liner

200039308
40150002: RNCC: 3 | RNVC: 2

3 Mar 2008

5340-21-911-1237
Bow Handle

219111237
C378225003: RNCC: 3 | RNVC: 2

5 Nov 1993

5340-21-660-2368
Key Blank

216602368
8GC: RNCC: 3 | RNVC: 2
9GC: RNCC: 3 | RNVC: 2
999GC: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-908-5313
Filler Opening Cap

219085313
T25: RNCC: 3 | RNVC: 2

24 May 2002

5340-20-007-1743
Mounting Plate

200071743
1289040: RNCC: 3 | RNVC: 2

1 Oct 2012

5340-21-888-7744
Swivel Caster

218887744
XLP414: RNCC: 3 | RNVC: 2
XLP414: RNCC: 3 | RNVC: 2

27 Mar 1982

5340-21-901-8226
Nonmetallic Solid Wheel

219018226
2-4-45: RNCC: 3 | RNVC: 2
2-4-45: RNCC: 3 | RNVC: 2

17 Jul 1986

5340-21-311-8999

5340-21-848-1905
Dust And Moisture Seal Protective Cap

218481905
10: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-660-1631
Sliding Door Track

216601631
133-9375: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-862-6195
Key Blank

218626195
14D: RNCC: 3 | RNVC: 2

16 Sep 1971

5340-20-008-0383
Mounting Bracket

200080383
4124857: RNCC: 3 | RNVC: 2

22 Oct 2013

5340-20-002-4116
Bonding Strap

200024116
130014BS901-8: RNCC: 3 | RNVC: 2

15 Dec 2005