What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

Hardware, Commercial - Canada (CA)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Canada (CA) - NCB is 20 or 21

Page 34 of 64

NSN Format for Hardware, Commercial
Codified by Canada

53	40	21	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Canada (CA)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 190 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 63 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 26 Items
What is a Rod End Connector? 44 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 69 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 226 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 94 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 20 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 582 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 43 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 202 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 65 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Shelf Bracket? 33 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Door Hook And Eye? 22 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 77 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 12 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 23 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 23 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 44 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 13 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is a Friction Catch? 38 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 15 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 39 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 26 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 86 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 20 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 42 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 91 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 57 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 25 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 163 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 101 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 21 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 16 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 288 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 52 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 23 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 131 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 24 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 41 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 70 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 45 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 210 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 163 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 82 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 44 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 38 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 25 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 20 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 42 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 18 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Glazier Point? 10 Items: A Glazier Point (POINT,GLAZIER) is a piece of thin sheet metal, triangular or diamond shaped, designed to hold a pane of glass in a wooden sash.
What is an Angle Bracket? 1105 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 81 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 32 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1130 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 20 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 49 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 37 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Quick Release Plunger? 13 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 114 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flush Catch? 97 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 13 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 86 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 115 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 177 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 24 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 53 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 219 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 40 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 494 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 353 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 55 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 51 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 12 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 601 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 32 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 39 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 34 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 41 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 21 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping? 19 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 93 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 117 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 31 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 45 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 19 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 832 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 35 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 40 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 75 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 106 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Picture Hanger? 10 Items: A Picture Hanger (HANGER,PICTURE) is a hook like device that is secured to walls, bulkheads, columns and the like, by means of a nail, screw, magnet or adhesive backed cloth, that is included with and/or attached to the hook. It is designed to hold and suspend variuos items such as photographs, paintings, maps, documents, etc.
What is a Protection Bellows? 16 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 57 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 49 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 2535 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 19 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 16 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 1222 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 48 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 64 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Threaded Hinged Standoff? 11 Items: A Threaded Hinged Standoff (STANDOFF,HINGED,THREADED) is a standoff, internally and/or externally, threaded on both ends with a hinge or pivot point to allow for independent movement of the ends.
What is a Spacing Threaded Standoff? 178 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 115 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a Crank Handle? 13 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 29 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Mechanic Equipment Hardware Kit? 87 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Dust And Moisture Seal Protective Cover? 38 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 51 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 308 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 41 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 39 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 178 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 27 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 80 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 86 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 34 of 64

5340-21-920-8502
Access Cover

219208502
9378696-1: RNCC: 3 | RNVC: 2

20 Oct 2000

5340-20-004-2141
Angle Bracket

200042141
542788-1: RNCC: 3 | RNVC: 2

22 Jul 2008

5340-21-914-0832
Mounting Bracket

219140832
9575951-1: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-21-920-2016
Retaining Clip

219202016
122-700: RNCC: 3 | RNVC: 2

18 Jun 1999

5340-21-901-8598
Expansion Shield

219018598
34677: RNCC: 3 | RNVC: 2

23 Mar 1987

5340-20-007-9228
Mounting Bracket

200079228
4129159: RNCC: 3 | RNVC: 2

16 Sep 2013

5340-21-866-9041
Butt Hinge

218669041
B64: RNCC: 3 | RNVC: 2

16 Jun 1972

5340-21-898-4429
Butt Hinge

218984429
1191C15 4.5X4.5: RNCC: 3 | RNVC: 2
1191US15 4.5X4.5: RNCC: 3 | RNVC: 2
BB991C15 4.5X4.5: RNCC: 5 | RNVC: 2

13 Jun 1985

5340-20-006-5223
Mounting Bracket

200065223
0875155-1: RNCC: 3 | RNVC: 2

5 Oct 2011

5340-21-884-0971
Flush Catch

218840971
3-4897XE1: RNCC: 3 | RNVC: 2

26 May 1981

5340-21-920-0263
Mounting Bracket

219200263
10607176-2: RNCC: 3 | RNVC: 2

18 Mar 1999

5340-21-848-4546
Doorstop

218484546
E2250-3: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-908-0628
Handle Cover

219080628
161 00 34 0070: RNCC: 3 | RNVC: 2

2 Mar 1991

5340-21-908-4929
Webbing Strap

219084929
9117122: RNCC: 3 | RNVC: 2

9 Dec 1992

5340-20-006-4242
Elastic Strap

200064242
091895-M066: RNCC: 3 | RNVC: 2

21 Jul 2011

5340-21-911-1203
Coat And Hat Hook

219111203
D8001: RNCC: 3 | RNVC: 2

26 Oct 1993

5340-20-001-9265
Angle Bracket

200019265
10638740: RNCC: 3 | RNVC: 2

4 Mar 2005

5340-21-914-4874
Window Retaining Plate

219144874
9679293: RNCC: 3 | RNVC: 2

8 Apr 1998

5340-20-007-4427
Access Cover

200074427
IK43419800M: RNCC: 3 | RNVC: 2
9801K01401: RNCC: 5 | RNVC: 2

6 Feb 2013

5340-21-912-5781
Tie-Rod Assembly

219125781
8729272-1: RNCC: 3 | RNVC: 2

30 Jun 1995

5340-21-911-1481
Hand Carrying Strap Assembly

219111481
0 21200 86527 5: RNCC: 3 | RNVC: 2

17 Sep 1994

5340-21-870-9438
Door Handle

218709438
2303US26D: RNCC: 3 | RNVC: 2

9 Dec 1975

5340-21-908-5000
Door Holder

219085000
SCHW-236: RNCC: 3 | RNVC: 2
DA05174-05: RNCC: 5 | RNVC: 1
236: RNCC: 5 | RNVC: 2
50431: RNCC: 5 | RNVC: 9

14 Jan 1993

5340-21-911-1324
Coat And Hat Hook

219111324
2460-32: RNCC: 3 | RNVC: 2

26 Nov 1993

5340-21-880-7440
Mending Plate

218807440
240126: RNCC: 3 | RNVC: 2

30 Oct 1979

5340-21-870-9517
Webbing Strap

218709517
7253: RNCC: 3 | RNVC: 2

3 Mar 1976

5340-20-000-5820
Plug Button

200005820
317-310: RNCC: 3 | RNVC: 2

21 Feb 2003

5340-20-004-3124
Synchro Clamp

200043124
3000489: RNCC: 3 | RNVC: 2
3000489: RNCC: 3 | RNVC: 9

25 Sep 2008

5340-21-660-2259
Corrosion Preventive Anode

216602259
MILA18001ECLASS2TYPEZRN: RNCC: 4 | RNVC: 1

23 Aug 1967

5340-20-003-9428
Mounting Bracket

200039428
10627509-PG: RNCC: 3 | RNVC: 2

10 Mar 2008

5340-21-920-9060
Angle Bracket

219209060
9878208-1: RNCC: 3 | RNVC: 2

9 Nov 2000

5340-20-000-3052
Mounting Bracket

200003052
9380469-1: RNCC: 3 | RNVC: 2

26 Jul 2002

5340-20-001-5267
Mounting Plate

200015267
DE-5465: RNCC: 3 | RNVC: 2

10 Jul 2004

5340-20-005-8117
Mounting Bracket

200058117
241-813107-000: RNCC: 3 | RNVC: 2

30 Aug 2010

5340-20-003-8127
Mounting Bracket

200038127
TE10014428-001: RNCC: 3 | RNVC: 2

3 Jan 2008

5340-21-908-4835
Key Blank

219084835
DA-05053-11: RNCC: 3 | RNVC: 2

1 Nov 1992

5340-20-003-1904
Angle Bracket

200031904
541315: RNCC: 3 | RNVC: 2
541315: RNCC: 5 | RNVC: 2

6 Feb 2007

5340-20-003-3075
Grip Bar

200033075
1SI0058-200: RNCC: 3 | RNVC: 2

17 Apr 2007

5340-21-864-8842
Dust And Moisture Seal Boot

218648842
LYMAN2758D3X1: RNCC: 3 | RNVC: 2

19 Sep 1978

5340-20-003-1830
Jack Insert Flange

200031830
ST3287-01: RNCC: 3 | RNVC: 2

31 Jan 2007

5340-20-005-7469
Mounting Plate

200057469
542446-1: RNCC: 3 | RNVC: 2

26 Jul 2010

5340-21-311-9577
Retaining Band

213119577
J800-68: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-003-9356
Bow Handle

200039356
2108-A32: RNCC: 3 | RNVC: 2
10328273: RNCC: 6 | RNVC: 9

5 Mar 2008

5340-21-889-8030
Clip

218898030
0-0: RNCC: 3 | RNVC: 1

18 Jul 1982

5340-21-660-0231
Butt Hinge

216600231
840: RNCC: 3 | RNVC: 1
840 1 X 1: RNCC: 3 | RNVC: 2
131-8023: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-000-2349
Mounting Plate

200002349
9378991-1: RNCC: 3 | RNVC: 2

20 Jun 2002

5340-21-901-8923
Angle Bracket

219018923
WW488156: RNCC: 3 | RNVC: 2
59.23.084.A: RNCC: 5 | RNVC: 2

22 Feb 1988

5340-20-004-7135
Hook

200047135
MQ-10395: RNCC: 3 | RNVC: 2
10604244: RNCC: 5 | RNVC: 2

31 Mar 2009

5340-21-905-5253
Swivel Caster

219055253
2-4070-45: RNCC: 3 | RNVC: 2

4 Nov 1988

5340-21-660-1683
Expansion Shield

216601683
01044: RNCC: 3 | RNVC: 2
101-852: RNCC: 3 | RNVC: 2
852: RNCC: 3 | RNVC: 2
101-01044: RNCC: 3 | RNVC: 2
12: RNCC: 5 | RNVC: 1
115-0717: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-876-2227
Resilient Mount

218762227
091363375: RNCC: 3 | RNVC: 2

27 Sep 1977

5340-20-008-1187
Buckle

200081187
FC50BM-XB: RNCC: 3 | RNVC: 2

20 Nov 2013

5340-21-815-4415
Spring Tension Clip

218154415
49274: RNCC: 3 | RNVC: 2

14 Jul 1964

5340-21-882-8736
General Purpose Resilient Mount

218828736
RP653555: RNCC: 3 | RNVC: 2
17-136 1MN60 (01X60): RNCC: 3 | RNVC: 2
AP339550: RNCC: 5 | RNVC: 2

10 Sep 1980

5340-20-004-0527
Access Cover

200040527
0377354-1: RNCC: 3 | RNVC: 2

24 Apr 2008

5340-21-908-4751
Threaded Rod End

219084751
81054-5: RNCC: 3 | RNVC: 2

7 Oct 1992

5340-20-002-4115
Bonding Strap

200024115
130014BS901-6: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-20-006-6761
Mounting Bracket

200066761
0677865-1: RNCC: 3 | RNVC: 2

19 Jan 2012

5340-21-921-2210
Loop Clamp

219212210
22A-375: RNCC: 3 | RNVC: 2

5 Jul 2001

5340-21-890-4796
Plug Button

218904796
31535: RNCC: 3 | RNVC: 2

1 Nov 1982

5340-21-889-8923
Rod End Clevis

218898923
808509-1: RNCC: 3 | RNVC: 2

1 Aug 1982

5340-21-908-3429
Mount Support

219083429
12157-1: RNCC: 3 | RNVC: 2

23 Oct 1991

5340-21-908-0818
Access Cover

219080818
8663754: RNCC: 3 | RNVC: 2

30 May 1991

5340-21-912-5930
Retaining Strap

219125930
WW 443 488 C: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-21-842-8475
Butt Hinge Leaf

218428475
MS20001PY12-120: RNCC: 2 | RNVC: 2
107S8328-12: RNCC: 3 | RNVC: 2

26 Apr 1966

5340-21-908-0024
Battering Ra Cradle

219080024
RC001BR: RNCC: 3 | RNVC: 2

26 May 1990

5340-21-921-0894
Support Device Asse

219210894
IT1381-1: RNCC: 3 | RNVC: 2

4 Apr 2001

5340-21-905-5311
Butt Hinge Leaf

219055311
6000-50-1514: RNCC: 3 | RNVC: 2

10 Dec 1988

5340-21-910-8743
Double Angle Bracket

219108743
TE10003868-002: RNCC: 3 | RNVC: 2

25 Jun 1993

5340-21-908-0444
Loop Clamp

219080444
780 36 0072: RNCC: 3 | RNVC: 2

24 Dec 1990

5340-21-660-1492
Bail Handle

216601492
0-0: RNCC: 3 | RNVC: 1
2041J: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-311-9639
Retaining Strap

213119639
J867-3: RNCC: 3 | RNVC: 1
14M8-3: RNCC: 3 | RNVC: 2
14M8-3: RNCC: 3 | RNVC: 2
14M8-3: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-882-8099
Bail Handle

218828099
0861-0014: RNCC: 3 | RNVC: 2
861: RNCC: 3 | RNVC: 2

7 May 1980

5340-20-001-2416
Bow Handle

200012416
71078-001: RNCC: 3 | RNVC: 2

26 Jan 2004

5340-20-006-6137
Mounting Plate

200066137
0976349-1: RNCC: 3 | RNVC: 2

25 Nov 2011

5340-20-006-5328
Angle Bracket

200065328
0875202-2: RNCC: 3 | RNVC: 2

6 Oct 2011

5340-21-920-7224
Plate. Clamp

219207224
9378034-1: RNCC: 3 | RNVC: 2

25 Jul 2000

5340-21-845-0347
Loop Clamp

218450347
2002T94P01: RNCC: 3 | RNVC: 2

27 Sep 1966

5340-21-880-7957
Butt Hinge

218807957
ECD5300C3: RNCC: 3 | RNVC: 1

14 May 1980

5340-21-878-0148
Power Door Hinge

218780148
H167: RNCC: 3 | RNVC: 2

20 Dec 1977

5340-21-888-7741
Caster Wheel

218887741
FCW1630B: RNCC: 3 | RNVC: 2
FCW1630B: RNCC: 3 | RNVC: 2

27 Mar 1982

5340-21-896-2142
Rigid Caster

218962142
72-PD-06201R: RNCC: 3 | RNVC: 2

27 May 1984

5340-20-005-9047
Manual Control Handle

200059047
S136-05-013: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-21-877-3447
Expansion Plug

218773447
31517: RNCC: 3 | RNVC: 2

18 Oct 1977

5340-21-870-9718

5340-21-875-3911

5340-21-870-9896

5340-21-660-1692
Expansion Shield

216601692
01078: RNCC: 3 | RNVC: 2
101-01078: RNCC: 3 | RNVC: 2
101-1025: RNCC: 3 | RNVC: 2
1025: RNCC: 3 | RNVC: 2
22: RNCC: 5 | RNVC: 1
115-0739: RNCC: 6 | RNVC: 9

30 Nov 1965

5340-20-005-9830
Multiple Angle Bracket

200059830
82521071-003: RNCC: 3 | RNVC: 2

13 Dec 2010

5340-20-004-1587
Headless Straight Rod

200041587
28365-A: RNCC: 3 | RNVC: 2

5 Jun 2008

5340-21-908-4146
Mounting Plate

219084146
CF 826 085 A: RNCC: 3 | RNVC: 2

30 May 1992

5340-21-908-5127
Loop Clamp

219085127
B183845797A: RNCC: 3 | RNVC: 2

5 Feb 1993

5340-20-006-5622
Mounting Plate

200065622
1175055-1: RNCC: 3 | RNVC: 2

28 Oct 2011

5340-21-818-9663

5340-21-913-1435
Access Cover

219131435
9576355-1: RNCC: 3 | RNVC: 2

5 Jul 1996

5340-21-884-0257
Flush Lock

218840257
4510RH11/32: RNCC: 3 | RNVC: 2

24 Dec 1980

5340-20-005-6784
Butt Hinge

200056784
9480779-1: RNCC: 3 | RNVC: 2
9480779-1: RNCC: 3 | RNVC: 2

11 Jun 2010

5340-21-868-8440
Barrel Bolt

218688440
1076: RNCC: 3 | RNVC: 1
1076C2G2-1-2: RNCC: 3 | RNVC: 2

17 May 1973

5340-21-900-1305
Kick Door Plate

219001305
2314: RNCC: 3 | RNVC: 1
2314-40X34.5X0.062: RNCC: 3 | RNVC: 2

28 Nov 1985

5340-21-867-1037
Strap Fastener Loop

218671037
TUL7222: RNCC: 3 | RNVC: 2
7222: RNCC: 3 | RNVC: 2

20 Oct 1972

5340-21-860-5595
Butt Hinge

218605595
184: RNCC: 3 | RNVC: 1
184 4X4: RNCC: 3 | RNVC: 2

15 Oct 1970

5340-21-867-9149
Dust And Moisture Seal Boot

218679149
112759: RNCC: 3 | RNVC: 2

17 May 1973

5340-21-867-0036
General Purpose Resilient Mount

218670036
183346: RNCC: 3 | RNVC: 2

14 Jul 1972

5340-21-874-8704
Webbing Strap

218748704
8415: RNCC: 3 | RNVC: 2

25 Aug 1976

5340-20-004-5853
Blank Panel

200045853
10665965-011PG: RNCC: 3 | RNVC: 2
10665965: RNCC: 5 | RNVC: 1
10665965-011: RNCC: 5 | RNVC: 1

18 Feb 2009

5340-21-876-1773
Rod End Clevis

218761773
15032: RNCC: 3 | RNVC: 2

21 Jun 1977

5340-21-901-8404
Expansion Shield

219018404
HSL M10/20: RNCC: 3 | RNVC: 2

13 Jan 1987

5340-21-862-6599
Mortise Lock Set

218626599
2048XT109X8254EX187ESXDAB810: RNCC: 3 | RNVC: 1
7750XD35X15XG522X15XDY1305XTM11-: RNCC: 3 | RNVC: 1
6745X1683X562X125: RNCC: 3 | RNVC: 1
7343X1719X1121X2140X75213: RNCC: 3 | RNVC: 1
7343X1719X1121X2140X75213: RNCC: 3 | RNVC: 1
132-3632: RNCC: 6 | RNVC: 9

14 Oct 1971

5340-20-004-4750
Mounting Block

200044750
9781002: RNCC: 3 | RNVC: 2

7 Jan 2009

5340-20-003-5095
Mounting Plate

200035095
10664616-001PW: RNCC: 3 | RNVC: 2
10664616: RNCC: 5 | RNVC: 1

6 Aug 2007

5340-20-002-5660
Shaft Keeper

200025660
7402-058-1: RNCC: 3 | RNVC: 2

16 Mar 2006

5340-21-914-1919
Adjusting Rod

219141919
1237-227-1: RNCC: 3 | RNVC: 2

30 Jul 1998

5340-21-920-6732
Safe Cable Assembly

219206732
9781049-1: RNCC: 3 | RNVC: 2
G1207.5: RNCC: 5 | RNVC: 2

30 May 2000

5340-20-000-3269
Ceiling Bracket Ass

200003269
9380133-1: RNCC: 3 | RNVC: 2

5 Aug 2002

5340-21-888-7647
Electrical-Mechanical Equipment Post

218887647
36-538: RNCC: 3 | RNVC: 2

21 Mar 1982

5340-20-003-0461
Loop Clamp

200030461
086-586: RNCC: 3 | RNVC: 2

23 Nov 2006

5340-21-108-9193
Retaining Strap

211089193
5: RNCC: 3 | RNVC: 2
1000285: RNCC: 6 | RNVC: 9
305-9035: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-859-1538
Bracket

218591538
2856-1-9: RNCC: 3 | RNVC: 2

18 Jun 1970

5340-21-908-5019
Broche

219085019
SD12570-3: RNCC: 3 | RNVC: 2

20 Jan 1993

5340-21-911-8896
Access Door

219118896
9279574-4: RNCC: 3 | RNVC: 2

3 Jun 1994

5340-20-002-4056
Shelf Bracket

200024056
130014DE331-1: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-20-000-8807
Butt Hinge

200008807
10656666-001: RNCC: 3 | RNVC: 2
10656666: RNCC: D | RNVC: 9

8 Jul 2003

5340-20-001-7430
Mounting Plate

200017430
TE10010171-003: RNCC: 3 | RNVC: 2
TE10010171: RNCC: D | RNVC: 9

3 Dec 2004

5340-21-866-9244
Shelf Support

218669244
101: RNCC: 3 | RNVC: 2

14 Jul 1972

5340-21-860-7526
Latch Lh Door

218607526
P2218: RNCC: 3 | RNVC: 2

14 Jan 1971

5340-20-001-8122
General Purpose Resilient Mount

200018122
10660758-002: RNCC: 3 | RNVC: 2
10660758: RNCC: D | RNVC: 9

6 Jan 2005

5340-21-920-1259
Mounting Bracket

219201259
9877733: RNCC: 3 | RNVC: 2

17 May 1999

5340-20-002-5755
Egt Blanking Plate

200025755
7406-022-1: RNCC: 3 | RNVC: 2

16 Mar 2006

5340-21-893-8119
Retaining Clip

218938119
HL-119: RNCC: 3 | RNVC: 2

10 Sep 1983

5340-21-912-6758
Corrosion Preventive Anode

219126758
IBM-9452025 DETAIL 1-5G: RNCC: 3 | RNVC: 1

16 Sep 1995

5340-21-814-1810
Hinge

218141810
175889-46L: RNCC: 3 | RNVC: 2

13 Jun 1964

5340-21-882-8053
Nonmetallic Bumper

218828053
320-382-756: RNCC: 3 | RNVC: 2

30 Apr 1980

5340-20-007-8579
Seal Retaining Plate

200078579
2038-742: RNCC: 3 | RNVC: 2

28 Aug 2013

5340-21-817-7988

5340-21-818-0143

5340-21-895-0568

5340-20-002-5694
Bushing

200025694
7403-131-1: RNCC: 3 | RNVC: 2

16 Mar 2006

5340-20-002-1006
Air Inlet-Outlet Frame

200021006
GC432-0019-2: RNCC: 3 | RNVC: 2

1 Jun 2005

5340-21-913-8885
Mounting Plate

219138885
500-478-01: RNCC: 3 | RNVC: 2

25 Mar 1997

5340-21-814-3255
Spring Tension Clip

218143255
A3032: RNCC: 3 | RNVC: 2
FC3873: RNCC: 5 | RNVC: 2

13 Jun 1964

5340-21-908-4290
Access Door Hinge

219084290
REF NOT ON FILE: RNCC: 3 | RNVC: 2

27 May 1992

5340-21-817-9284

5340-21-817-0099

5340-21-852-9338
Harness Clip

218529338
49205: RNCC: 3 | RNVC: 2
5340-0705: RNCC: 6 | RNVC: 9

24 Feb 1969

5340-21-882-8107
Clamping Catch

218828107
4842413524: RNCC: 3 | RNVC: 2

14 May 1980

5340-20-003-2771
Snap Hook

200032771
HAR 1451: RNCC: 3 | RNVC: 2

21 Mar 2007

5340-20-000-0303
Mounting Channel

200000303
9379008-1: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-20-006-0375
Bow Handle

200060375
0656-034733-12: RNCC: 3 | RNVC: 2

5 Jan 2011

5340-20-002-4121
Bonding Strap

200024121
130014BS901-11: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-20-003-8980
Mounting Bracket

200038980
10664063-011PEG: RNCC: 3 | RNVC: 2

11 Feb 2008

5340-21-868-9261
Shelf Support

218689261
BZ102: RNCC: 3 | RNVC: 2

23 Apr 1974

5340-20-002-2111
Calibration Bar

200022111
0075712-1: RNCC: 3 | RNVC: 2

19 Aug 2005

5340-21-853-6934
Corrosion Preventive Anode

218536934
832524: RNCC: 3 | RNVC: 2

11 Jan 1969

5340-21-891-6672
Stud And Nut

218916672
312RH: RNCC: 3 | RNVC: 2

29 May 1983

5340-20-007-3839
Mounting Plate

200073839
10707035-011: RNCC: 3 | RNVC: 2
10707035: RNCC: D | RNVC: 9

11 Jan 2013

5340-20-006-5737
Mounting Plate

200065737
10663156-001PEW: RNCC: 3 | RNVC: 2

1 Nov 2011

5340-21-853-5796
Angle Bracket

218535796
550417-002: RNCC: 3 | RNVC: 2
550417-2: RNCC: 5 | RNVC: 2

22 Mar 1969

5340-21-865-1753
Bail Handle

218651753
1205-4R: RNCC: 3 | RNVC: 2

17 Mar 1972

5340-20-005-9112
Catch Strike

200059112
10678894-001: RNCC: 1 | RNVC: 2
241475: RNCC: 3 | RNVC: 2

9 Nov 2010

5340-20-006-0942
Mounting Bracket

200060942
0656-033691-12: RNCC: 3 | RNVC: 2

7 Feb 2011

5340-21-730-0073
Oxygen Regulator

217300073
74-451-19: RNCC: 3 | RNVC: 2
3040-10: RNCC: 3 | RNVC: 2

2 Aug 1968

5340-21-908-3595
Mounting Bracket

219083595
CF472905B: RNCC: 3 | RNVC: 2
59.61.057.A: RNCC: 5 | RNVC: 2

18 Dec 1991

5340-20-005-1604
Tie Down Adapter

200051604
0975013-1: RNCC: 3 | RNVC: 2

12 Nov 2009

5340-21-905-5246
Rigid Caster

219055246
4-6208-639: RNCC: 3 | RNVC: 2

28 Oct 1988

5340-21-915-0142
Angle Bracket

219150142
10626427: RNCC: 3 | RNVC: 2

6 May 1999

5340-20-003-0594
Webbing Strap

200030594
C30603-092-1: RNCC: 3 | RNVC: 2

1 Dec 2006

5340-20-001-2291
Rod End Clevis

200012291
GS321-0654-5: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-20-006-1687
Mounting Plate

200061687
3108724-01: RNCC: 3 | RNVC: 2

16 Mar 2011

5340-21-913-7670
Lock-Release Lever

219137670
616-800019-000: RNCC: 3 | RNVC: 2

6 Mar 1997

5340-21-908-4022
Helical Compression Spring Retainer

219084022
215-26091-6: RNCC: 3 | RNVC: 2

8 May 1992

5340-21-887-8337
Expansion Shield

218878337
1-6: RNCC: 3 | RNVC: 2

12 Dec 1981

5340-21-908-0016
Electrical-Mechanical Equipment Post

219080016
593222: RNCC: 3 | RNVC: 2

11 May 1990

5340-21-848-4502
Hinged Hasp

218484502
912K: RNCC: 3 | RNVC: 1
912C2G-4 1/2: RNCC: 3 | RNVC: 2
912US2G-4 1/2: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-880-7408
Corr Anode Assembly

218807408
288-2: RNCC: 3 | RNVC: 2
NA001397: RNCC: 5 | RNVC: 2

9 Oct 1979

5340-20-002-0241
Dust And Moisture Seal Protective Cap

200020241
215T40044-4: RNCC: 3 | RNVC: 2

9 May 2005

5340-21-884-0051
Electrical-Mechanical Equipment Post

218840051
46-54400-280: RNCC: 3 | RNVC: 2

13 Nov 1980

5340-21-868-9790
Retaining Strap

218689790
1213: RNCC: 3 | RNVC: 2
5340-5238: RNCC: 6 | RNVC: 9
L24090: RNCC: 6 | RNVC: 9

5 Nov 1974

5340-20-007-3202
Lock Bar

200073202
4180.2.207: RNCC: 3 | RNVC: 2

10 Dec 2012

5340-20-004-0467
Mounting Bracket

200040467
0377381-1: RNCC: 3 | RNVC: 2

22 Apr 2008

5340-21-884-0283
Retaining Strap

218840283
LN1506: RNCC: 3 | RNVC: 2
3/4IN: RNCC: 5 | RNVC: 1
3/4IN: RNCC: 5 | RNVC: 1

24 Dec 1980

5340-21-901-8156
Antipilferage Seal

219018156
PRONGLOK 4: RNCC: 3 | RNVC: 1
PR1035: RNCC: 5 | RNVC: 1

13 Jun 1986

5340-21-912-5879
Double Angle Bracket

219125879
192-83011-3: RNCC: 3 | RNVC: 2

18 Jul 1995

5340-21-911-1077
Access Cover

219111077
G172254-1: RNCC: 3 | RNVC: 2

23 Sep 1993

5340-21-908-5017
Broche

219085017
SD12569-3: RNCC: 3 | RNVC: 2

20 Jan 1993

5340-21-912-9766
Access Door

219129766
12930-C: RNCC: 3 | RNVC: 2

11 Jan 1996

5340-21-908-0623
Blank Panel

219080623
214917-5: RNCC: 3 | RNVC: 2

20 Mar 1991

5340-20-000-2491
Mounting Bracket

200002491
9379218-1: RNCC: 3 | RNVC: 2

26 Jun 2002

5340-20-005-7287
Remova Iedpk Laviii

200057287
10580004-1: RNCC: 3 | RNVC: 2

15 Jul 2010

5340-21-809-7772

5340-21-809-9512

5340-21-797-6481

5340-21-908-0805
Nonmetallic Bumper

219080805
2197: RNCC: 3 | RNVC: 2
22118: RNCC: 5 | RNVC: 2

24 May 1991

5340-21-908-0140
Retaining Strap

219080140
702-601018-000: RNCC: 3 | RNVC: 2

3 Nov 1990

5340-20-007-6867
Mounting Bracket

200076867
0778081-2: RNCC: 3 | RNVC: 2

4 Jun 2013

5340-21-913-1243
Manual Control Lever

219131243
9578113-1: RNCC: 3 | RNVC: 2

14 Sep 1996

5340-20-006-0717
Mounting Plate

200060717
0678389-1: RNCC: 3 | RNVC: 2

24 Jan 2011

5340-20-007-0963
Caster Wheel

200070963
W-76-XD: RNCC: 3 | RNVC: 2

21 Aug 2012

5340-21-884-0358
Swivel Caster

218840358
2686-1: RNCC: 3 | RNVC: 2

20 Jan 1981

5340-21-860-1031
Dust And Moisture Seal Protective Cap

218601031
LT1-2: RNCC: 3 | RNVC: 2

17 Jun 1971

5340-21-660-1887
Turnbuckle

216601887
304: RNCC: 3 | RNVC: 1
304X3/4-9: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-011-2827

5340-21-849-9958
Key Blank

218499958
D06: RNCC: 3 | RNVC: 2

2 Aug 1968

5340-21-898-4499
Spring Loaded Cylinder Fastener

218984499
099-457: RNCC: 3 | RNVC: 2
RHF6: RNCC: 5 | RNVC: 2

10 Jul 1985

5340-21-920-3889
Foot

219203889
9383423-1: RNCC: 3 | RNVC: 2

2 Nov 1999

5340-21-920-9427
Mounting Bracket

219209427
10638397-PG: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-21-868-9786
Pipe Bracket

218689786
CT65X1.250: RNCC: 3 | RNVC: 2

5 Nov 1974

5340-21-908-4726
General Purpose Resilient Mount

219084726
CF 813 322 AE: RNCC: 3 | RNVC: 2

12 Sep 1992

5340-21-884-0192
Damper Linkage Kit

218840192
BK1: RNCC: 3 | RNVC: 2

12 Dec 1980

5340-21-860-5697
Door Hook And Eye

218605697
0-0: RNCC: 3 | RNVC: 1

15 Oct 1970

5340-21-866-9318
Rubber Patch

218669318
0-0: RNCC: 3 | RNVC: 1

14 Jul 1972

5340-21-842-9161
Nonmetallic Bumper

218429161
369835: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-877-3396
Expansion Plug

218773396
31563: RNCC: 3 | RNVC: 2

18 Oct 1977

5340-21-851-3171

5340-21-851-3239

5340-21-874-3815
Expansion Plug

218743815
BP210L: RNCC: 3 | RNVC: 2

22 Mar 1977

5340-21-891-6546
Double Angle Bracket

218916546
AP646542: RNCC: 3 | RNVC: 2

1 May 1983

5340-21-905-5190
Door Closer Cover

219055190
4020-72-R: RNCC: 3 | RNVC: 2

7 Oct 1988

5340-21-874-8486
Webbing Strap

218748486
8414: RNCC: 3 | RNVC: 2

25 Aug 1976

5340-21-880-7815
Double Angle Bracket

218807815
2661-632: RNCC: 3 | RNVC: 2

5 Mar 1980

5340-21-880-7421
Electrical-Mechanical Equipment Post

218807421
240804: RNCC: 3 | RNVC: 2

30 Oct 1979

5340-21-888-1670
Resilient Mount

218881670
C3H-412-12: RNCC: 3 | RNVC: 2

12 Feb 1982

5340-20-003-5833
Mounting Bracket

200035833
0577009-1: RNCC: 3 | RNVC: 2

24 Sep 2007

5340-20-003-6677
Mounting Bracket

200036677
10628220-PW: RNCC: 3 | RNVC: 2

12 Oct 2007

5340-21-921-6836
Webbing Strap

219216836
10607670-08: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-21-908-3807
Retaining Strap

219083807
5262696-2: RNCC: 3 | RNVC: 2

24 Jan 1992

5340-21-879-5765
Electrical-Mechanical Equipment Post

218795765
EA68533-1: RNCC: 3 | RNVC: 2

6 Feb 1979

5340-21-845-0744

5340-21-848-3505

5340-21-848-3616

5340-21-855-0939
Plug

218550939
2483833: RNCC: 3 | RNVC: 2
2483833: RNCC: 3 | RNVC: 2

23 Jul 1969

5340-21-908-0902
Engine Accessory Bracket

219080902
12A00460P02: RNCC: 3 | RNVC: 2

26 Jul 1991

5340-21-913-0836
Loop Clamp

219130836
NSV 350 22: RNCC: 3 | RNVC: 2

28 Apr 1996

5340-21-893-7808
Inside Kno Retainer

218937808
18F91: RNCC: 3 | RNVC: 2

16 Jul 1983

5340-21-660-0546
Hinged Hasp

216600546
915RBP: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-878-0224
Retaining Strap

218780224
4180: RNCC: 3 | RNVC: 2

7 Feb 1978

5340-21-888-7699
Swivel Caster

218887699
661NY: RNCC: 3 | RNVC: 2
661NY: RNCC: 3 | RNVC: 2

27 Mar 1982

5340-21-888-1450
Expansion Shield

218881450
38567: RNCC: 3 | RNVC: 2

6 Feb 1982

5340-21-856-7202
Retaining Strap

218567202
12A00164P01: RNCC: 3 | RNVC: 2

19 Sep 1969

5340-21-000-1143
Electrical-Mechanical Equipment Post

210001143
3260731: RNCC: 3 | RNVC: 2

25 May 1968

5340-20-007-7678
Mounting Bracket

200077678
10663586-001PG: RNCC: 3 | RNVC: 2
10663586: RNCC: D | RNVC: 9

11 Jul 2013

5340-21-852-5453
Padlock

218525453
1045AJ796-1770: RNCC: 3 | RNVC: 2
8: RNCC: 3 | RNVC: 2

1 Dec 1968

5340-20-003-5834
Mounting Bracket

200035834
0577008-1: RNCC: 3 | RNVC: 2

24 Sep 2007

5340-21-908-3306
Butt Hinge Leaf

219083306
8914835-1: RNCC: 3 | RNVC: 2

28 Sep 1991

5340-21-905-5661
Mounting Bracket

219055661
8277529-1: RNCC: 3 | RNVC: 2

31 Aug 1989

5340-20-000-2480
Double Angle Bracket

200002480
9378958-2: RNCC: 3 | RNVC: 2

26 Jun 2002

5340-21-905-5039
Rigid Caster

219055039
5-4-138: RNCC: 3 | RNVC: 2

19 May 1988

5340-21-660-0269
Butt Hinge

216600269
151: RNCC: 3 | RNVC: 1
151J: RNCC: 3 | RNVC: 2
151C1B: RNCC: 3 | RNVC: 2
131-8270: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-901-8648
Spring Tension Clip

219018648
213119: RNCC: 3 | RNVC: 2

28 May 1987

5340-21-895-0545
Expansion Shield

218950545
53369: RNCC: 3 | RNVC: 2

26 Feb 1984

5340-20-006-0422
Mechanical Stop

200060422
41A-42176-2: RNCC: 3 | RNVC: 2

6 Jan 2011

5340-21-108-9010

5340-21-914-9915
Access Cover

219149915
10558536: RNCC: 3 | RNVC: 2

6 Mar 1999

5340-21-904-8045
Mounting Plate

219048045
8717345: RNCC: 3 | RNVC: 2

4 May 1988

5340-21-860-7137
Bow Handle

218607137
392-41: RNCC: 3 | RNVC: 2

17 Dec 1970

5340-21-882-8741
Angle Bracket

218828741
AP636695: RNCC: 3 | RNVC: 2

10 Sep 1980

5340-20-000-4950
Runner

200004950
3113599-01: RNCC: 3 | RNVC: 2

31 Oct 2002

5340-20-005-1787
Mounting Bracket

200051787
10625103-PG: RNCC: 3 | RNVC: 2

26 Nov 2009

5340-21-905-5282
Access Cover

219055282
10-03934-01: RNCC: 3 | RNVC: 2

12 Nov 1988

5340-20-000-3488
Angle Bracket

200003488
10656583-001PW: RNCC: 3 | RNVC: 2

21 Aug 2002

5340-20-005-6682
Mounting Bracket

200056682
AC86595-01: RNCC: 3 | RNVC: 2

9 Jun 2010

5340-21-660-1991
Plug Button

216601991
BS48156: RNCC: 3 | RNVC: 2
48156: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-000-2394
Mounting Bracket

200002394
9380390-1: RNCC: 3 | RNVC: 2

21 Jun 2002

5340-21-877-3391
Expansion Plug

218773391
31499: RNCC: 3 | RNVC: 2

18 Oct 1977

5340-21-868-9078
Doorstop

218689078
FB19: RNCC: 3 | RNVC: 2

31 Dec 1973

5340-21-816-4679

5340-21-886-2219
Double Angle Bracket

218862219
NEUA4809: RNCC: 3 | RNVC: 2

7 Jul 1981

5340-21-908-3453
Bar

219083453
1349473: RNCC: 3 | RNVC: 2

2 Nov 1991

5340-21-859-1464
Retainer

218591464
920DPC10: RNCC: 3 | RNVC: 2
225: RNCC: 3 | RNVC: 2

18 Jun 1970

5340-21-842-0092
Spacing Threaded Standoff

218420092
321-473: RNCC: 3 | RNVC: 2

21 Dec 1965

5340-21-905-5258
Rim Lock

219055258
8550MP: RNCC: 3 | RNVC: 2
8550 COM: RNCC: 3 | RNVC: 2

28 Oct 1988

5340-21-911-9200
Angle Bracket

219119200
CF8483452: RNCC: 3 | RNVC: 2

9 Aug 1994

5340-21-860-8743
Corrosion Preventive Anode

218608743
067-33473A: RNCC: 3 | RNVC: 1
5340STD100-99ITEM1: RNCC: 3 | RNVC: 2

15 Apr 1971

5340-20-004-8171
Butt Hinge

200048171
0677723-1: RNCC: 3 | RNVC: 2

14 May 2009

5340-20-005-4212
Mounting Bracket

200054212
543358-1: RNCC: 3 | RNVC: 2

1 Apr 2010

5340-21-888-1912
Spring Tension Clip

218881912
1013784-01: RNCC: 3 | RNVC: 2

21 Mar 1982

5340-20-005-5809
Mounting Bracket

200055809
AC40316-04: RNCC: 3 | RNVC: 2

17 May 2010

5340-20-008-0428
General Purpose Resilient Mount

200080428
80980746-0: RNCC: 3 | RNVC: 2

23 Oct 2013

5340-21-910-8720
Catch Strike

219108720
8461952-1: RNCC: 3 | RNVC: 2

24 Jun 1993

5340-21-911-1417
Un Partition Hanger

219111417
8079-1: RNCC: 3 | RNVC: 2

24 Dec 1993

5340-21-905-6007
Spring Tension Clip

219056007
CF 808 727 A: RNCC: 3 | RNVC: 2

26 Apr 1990

5340-20-004-0369
Door Assembly

200040369
9877962-1: RNCC: 3 | RNVC: 2

15 Apr 2008

5340-20-007-7255
Mounting Bracket

200077255
10707582-011PW: RNCC: 3 | RNVC: 2
10707582: RNCC: D | RNVC: 9

25 Jun 2013

5340-21-877-6478
Loop Clamp

218776478
M1032406: RNCC: 3 | RNVC: 2
2401-0324-06: RNCC: 5 | RNVC: 2

22 Nov 1977

5340-21-870-9621

5340-21-870-9525

5340-21-878-0608
Antipilferage Seal

218780608
PR1035: RNCC: 3 | RNVC: 1
PR0NGL0K4: RNCC: 5 | RNVC: 1

21 Feb 1978

5340-21-108-8957
Webbing Strap

211088957
3001921: RNCC: 3 | RNVC: 2
3001493: RNCC: 5 | RNVC: 1

6 Jun 1968

5340-21-660-1162
Coat And Hat Hook

216601162
T01232C15: RNCC: 3 | RNVC: 2
T01232: RNCC: 5 | RNVC: 2

30 Nov 1965

5340-21-868-9756
Pipe Bracket

218689756
97: RNCC: 3 | RNVC: 1

22 Oct 1974

5340-21-912-3303
Nonmetallic Bumper

219123303
TE30003732-001: RNCC: 3 | RNVC: 2

30 Jun 1995

5340-21-911-1090
Mounting Plate

219111090
RS 412 527 A C: RNCC: 3 | RNVC: 2

9 Oct 1993

5340-20-004-3811
Foot Mount

200043811
541695-1: RNCC: 3 | RNVC: 2

31 Oct 2008

5340-21-808-0857

5340-21-868-9887
Drift Bolt

218689887
5340-6111: RNCC: 3 | RNVC: 2

28 Jan 1975

5340-21-868-9225
Cas Spring Retainer

218689225
1254-32A: RNCC: 3 | RNVC: 2

10 Apr 1974

5340-21-908-0389
Rim Clenching Clamp

219080389
CF813998A: RNCC: 3 | RNVC: 2

11 Dec 1990

5340-21-866-9129
Butt Hinge

218669129
1041: RNCC: 3 | RNVC: 2

16 Jun 1972

5340-21-801-9036

5340-21-908-3616
Mounting Plate

219083616
CF826067A: RNCC: 3 | RNVC: 2

18 Dec 1991

5340-21-852-5650
Elastic Strap

218525650
RU15: RNCC: 3 | RNVC: 2
RU15IN: RNCC: 3 | RNVC: 2

1 Dec 1968

5340-21-802-8227

5340-21-921-3835
Mounting Bracket

219213835
9379307-1: RNCC: 3 | RNVC: 2

25 Oct 2001

5340-21-660-2296

5340-21-897-8650
Angle Bracket

218978650
8282079-1: RNCC: 3 | RNVC: 2

14 Feb 1985

5340-21-884-0594
Plug Button

218840594
BS51134K0100: RNCC: 3 | RNVC: 2
768763-1: RNCC: 3 | RNVC: 2
413151-7: RNCC: 5 | RNVC: 2

3 Feb 1981

5340-20-005-5989
Tie Down Adapter

200055989
HW20087: RNCC: 3 | RNVC: 2
8871T34: RNCC: 5 | RNVC: 2

19 May 2010

5340-21-880-7896
Electrical-Mechanical Equipment Post

218807896
19370-621: RNCC: 3 | RNVC: 2

26 Mar 1980

5340-20-007-9757
Mounting Bracket

200079757
0875237-1: RNCC: 3 | RNVC: 2

3 Oct 2013

5340-20-008-0286
Mounting Bracket

200080286
0976557-1: RNCC: 3 | RNVC: 2

21 Oct 2013

5340-21-818-3420

5340-21-817-9316

5340-20-003-1372
Mounting Plate

200031372
10665335-001PG: RNCC: 3 | RNVC: 2

9 Jan 2007

5340-20-000-8408
Inlet Enclosure

200008408
10656782-001: RNCC: 3 | RNVC: 2
10656782: RNCC: D | RNVC: 9

17 Jun 2003

5340-21-311-9544
Retaining Band

213119544
J800-14: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-870-9486
Bow Handle

218709486
900: RNCC: 3 | RNVC: 2

20 Jan 1976

5340-21-660-2408

5340-21-920-0896
Muffler Hanger.

219200896
NO REF 35: RNCC: 3 | RNVC: 2
23603-3496: RNCC: 5 | RNVC: 2

4 May 1999

5340-21-868-8213
Padlock

218688213
5B62: RNCC: 3 | RNVC: 1

15 Feb 1973

5340-21-898-4833
Clamp

218984833
2166 4127-224: RNCC: 3 | RNVC: 2

10 Sep 1985

5340-20-002-3595
Handle Grip

200023595
10626196: RNCC: 3 | RNVC: 2

15 Nov 2005

5340-21-848-2822

5340-21-848-1903

5340-21-856-1284

5340-20-000-8969
Rod End Connector

200008969
200-0259-103: RNCC: 3 | RNVC: 2

17 Jul 2003

5340-20-003-5130
Webbing Strap

200035130
1375-K: RNCC: 3 | RNVC: 2

8 Aug 2007

5340-21-911-1440
Loop Clamp

219111440
10360130: RNCC: 3 | RNVC: 2

3 Feb 1994

5340-20-003-7423
Mounting Plate

200037423
542214: RNCC: 3 | RNVC: 2

21 Nov 2007

5340-21-841-8571
Pipe Bracket

218418571
460-7312: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-660-0749
Recess Handle

216600749
227B26: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-002-7503
Eye Hook

200027503
PWC32514-0005: RNCC: 3 | RNVC: 2

2 Jun 2006

5340-20-007-7047
Mounting Bracket

200077047
B81002-228-1: RNCC: 3 | RNVC: 2

13 Jun 2013

5340-21-921-1897
Friction Catch

219211897
Q 5 2078 8002: RNCC: 3 | RNVC: 2

13 Jun 2001

5340-21-913-0107
Webbing Strap

219130107
9278808-2: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-21-913-0070
Mounting Plate

219130070
9281961: RNCC: 3 | RNVC: 2

1 Mar 1996

5340-20-001-8710
Loop Clamp

200018710
215-51298: RNCC: 3 | RNVC: 2

8 Feb 2005

5340-21-882-8258
Quick Release Plunger

218828258
S49N: RNCC: 3 | RNVC: 2

4 Jun 1980

5340-21-878-0387
Spring Tension Clip

218780387
051-30008: RNCC: 3 | RNVC: 2

14 Feb 1978

5340-21-911-9203
Mounting Bracket

219119203
CF8483429: RNCC: 3 | RNVC: 2

30 Jul 1994

5340-20-008-0106
Headless Straight Rod

200080106
4123636: RNCC: 3 | RNVC: 2

16 Oct 2013

5340-21-921-2387
Webbing Strap

219212387
0078458-3: RNCC: 3 | RNVC: 2

17 Jul 2001

5340-21-866-9812
Mortise Lock Set

218669812
21280: RNCC: 3 | RNVC: 2

18 Aug 1972

5340-20-007-6427
Mounting Plate

200076427
100003371: RNCC: 3 | RNVC: 2

10 May 2013

5340-21-866-9665
Rim Clenching Clamp

218669665
1467-4426A: RNCC: 3 | RNVC: 2

14 Jul 1972

5340-21-874-3805
Pipe Bracket

218743805
FIGCT99-2: RNCC: 3 | RNVC: 2
CT99-2: RNCC: 5 | RNVC: 2

22 Mar 1977

5340-21-910-8842
General Purpose Resilient Mount

219108842
8961193-1: RNCC: 3 | RNVC: 2

22 Jul 1993

5340-20-000-2448
Mounting Plate

200002448
9380096-1: RNCC: 3 | RNVC: 2

25 Jun 2002

5340-21-901-8414
Loop Clamp

219018414
69145: RNCC: 3 | RNVC: 2

13 Jan 1987

5340-21-102-8074
Furniture Glide

211028074
FH3324: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-848-4504
Door Holder

218484504
100: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-855-1423
General Purpose Resilient Mount

218551423
S2S80: RNCC: 3 | RNVC: 2

23 Jul 1969

5340-21-809-7784

5340-20-007-3912
Mounting Bracket

200073912
10705920-011PEW: RNCC: 3 | RNVC: 2
10705920: RNCC: D | RNVC: 9

14 Jan 2013

5340-21-913-6476
Access Cover

219136476
10524374: RNCC: 3 | RNVC: 2

22 Jan 1997

5340-21-913-8889
Mounting Bracket

219138889
10557433: RNCC: 3 | RNVC: 2

2 Apr 1997

5340-21-914-4229
Assembly Cover

219144229
10625445: RNCC: 3 | RNVC: 2

4 Feb 1998

5340-20-006-1318
Angle Bracket

200061318
446-83031-2: RNCC: 3 | RNVC: 2

21 Feb 2011

5340-21-912-8411
Retaining Strap

5340-20-000-2137
Retaining Strap

200002137
9379331-1: RNCC: 3 | RNVC: 2

12 Jun 2002

5340-21-905-5241
Spring Tension Clip

219055241
WL421403: RNCC: 3 | RNVC: 2

21 Oct 1988

5340-21-905-5239
Spring Tension Clip

219055239
WL421202: RNCC: 3 | RNVC: 2

21 Oct 1988

5340-21-920-3125
Dust And Moisture Seal Protective Cap

219203125
PK960: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-20-006-4559
Mounting Plate

200064559
0976314-1: RNCC: 3 | RNVC: 2

9 Aug 2011

5340-21-108-5164
Pawl Fastener

211085164
980: RNCC: 3 | RNVC: 2
1G54250: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-884-0347
Sash Pulley

218840347
27: RNCC: 3 | RNVC: 2
27: RNCC: 3 | RNVC: 2

6 Jan 1981

5340-20-005-0932
Mounting Plate

200050932
0989092: RNCC: 3 | RNVC: 2

6 Oct 2009

5340-20-003-8070
Module Rear Left Ao

200038070
0777243: RNCC: 3 | RNVC: 2

24 Dec 2007

5340-20-000-5819
Nonmetallic Bumper

200005819
4154: RNCC: 3 | RNVC: 2

21 Feb 2003

5340-20-003-1903
Angle Bracket

200031903
541301: RNCC: 3 | RNVC: 2
541301: RNCC: 5 | RNVC: 2

6 Feb 2007

5340-21-863-4012
Hook Handle

218634012
3302: RNCC: 3 | RNVC: 2
132-2810: RNCC: 6 | RNVC: 9

18 Nov 1971

5340-21-876-2166
Retaining Strap

218762166
464098C1: RNCC: 3 | RNVC: 2

20 Sep 1977

5340-21-660-0533
Hinged Hasp

216600533
815RBP: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-005-9900
Bumper

200059900
4102400: RNCC: 3 | RNVC: 2
23166: RNCC: 5 | RNVC: 9

14 Dec 2010

5340-21-911-9574
Tub Retaining Plate

219119574
3019301: RNCC: 3 | RNVC: 2

22 Oct 1994

5340-20-001-0977
Dust And Moisture Seal Protective Cap

200010977
10658521-001PEG: RNCC: 3 | RNVC: 2

31 Oct 2003

5340-21-913-4528
Strap Webbing Assem

219134528
10628377: RNCC: 3 | RNVC: 2

1 May 1998

5340-21-891-5697
Pipe Bracket

218915697
122CL: RNCC: 3 | RNVC: 2

7 Feb 1983

5340-20-008-1327
Mounting Bracket

200081327
10705144-011PEW: RNCC: 3 | RNVC: 2
10705144: RNCC: D | RNVC: 9

25 Nov 2013

5340-21-864-9438
Angle Bracket

218649438
34546: RNCC: 3 | RNVC: 2

14 Jul 1972

5340-21-005-8318
General Purpose Resilient Mount

210058318
WTC2: RNCC: 3 | RNVC: 2

25 May 1968

5340-21-311-9610

5340-21-311-9685

5340-21-908-0272
Turnbuckle Body

219080272
05128006: RNCC: 3 | RNVC: 2

31 Oct 1990

5340-21-911-8894
Access Door

219118894
9279574-2: RNCC: 3 | RNVC: 2

11 Jun 1994

5340-20-003-5878
Mounting Bracket

200035878
0577077-2: RNCC: 3 | RNVC: 2

25 Sep 2007

5340-21-878-0285
Door Closer

218780285
4025RH: RNCC: 3 | RNVC: 2

24 Jan 1978

5340-20-004-2709
Mounting Bracket

200042709
0875009: RNCC: 3 | RNVC: 2

3 Sep 2008

5340-21-908-0299

5340-21-908-5122

5340-20-002-8018
Access Cover

200028018
0476277-100: RNCC: 3 | RNVC: 2
0476277: RNCC: 5 | RNVC: 1

22 Jun 2006

5340-21-896-9886
Plate Assembly

218969886
93H-28: RNCC: 3 | RNVC: 2

4 Nov 1984

5340-20-004-9175
Mounting Bracket

200049175
0656-033269-12: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-21-914-1591
Access Cover

219141591
10557106-1: RNCC: 3 | RNVC: 2

6 Jun 1997

5340-21-912-9773
Loop Clamp

219129773
10558157: RNCC: 3 | RNVC: 2

20 Jan 1996

5340-21-913-2966
Mounting Bracket

219132966
10607705: RNCC: 3 | RNVC: 2

6 Oct 1996

5340-21-920-0422
Nonmetallic Bumper

219200422
10616633-2: RNCC: 3 | RNVC: 2

20 Mar 1999

5340-21-913-3474
Access Cover

219133474
10608228: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-21-921-5689
Mounting Bracket

219215689
10640099-PW: RNCC: 3 | RNVC: 2

17 Jan 2002

5340-21-913-8904
Mounting Bracket

219138904
10557636: RNCC: 3 | RNVC: 2

9 Apr 1997

5340-20-001-6829
Manual Control Lever

200016829
12043-1-0: RNCC: 3 | RNVC: 2

27 Oct 2004

5340-20-007-0440
Recess Handle

200070440
2000: RNCC: 3 | RNVC: 2

26 Jul 2012

5340-21-921-5773
Mounting Plate

219215773
10638819-PG: RNCC: 3 | RNVC: 2

21 Jan 2002

5340-20-006-1301
Angle Bracket

200061301
446-83029-2: RNCC: 3 | RNVC: 2

21 Feb 2011

5340-21-914-4787
Mounting Bracket

219144787
10524287: RNCC: 3 | RNVC: 2

4 Feb 1998

5340-21-913-2992
Mounting Plate

219132992
10556358: RNCC: 3 | RNVC: 2

18 Oct 1996

5340-21-860-9381
Mortise Lock Set

218609381
400BC3KWIKSET: RNCC: 3 | RNVC: 2

15 Apr 1971

5340-21-078-8820

5340-20-006-1336
Mounting Ring

200061336
446-83041-1: RNCC: 3 | RNVC: 2

22 Feb 2011

5340-21-912-7546
Mounting Bracket

219127546
10607501: RNCC: 3 | RNVC: 2

29 Aug 1996

5340-21-913-4662
Access Cover

219134662
10625451-PG: RNCC: 3 | RNVC: 2

5 Jul 1997

5340-21-913-6516
Rod End Clevis

219136516
10524817: RNCC: 3 | RNVC: 2

13 Feb 1997

5340-21-913-8841
Webbing Strap

219138841
10555820-30: RNCC: 3 | RNVC: 2

3 Apr 1997

5340-21-913-8877
Angle Bracket

219138877
10518883-PW: RNCC: 3 | RNVC: 2

19 Mar 1997

5340-21-913-8898
Mounting Bracket

219138898
10557555: RNCC: 3 | RNVC: 2

28 Mar 1997

5340-21-914-7359
Detent Plunger

219147359
A-30613: RNCC: 3 | RNVC: 2

21 May 1998

5340-21-913-8915
Rod End Clevis

219138915
215-93863: RNCC: 3 | RNVC: 2

10 Apr 1997

5340-21-874-8474
Webbing Strap

218748474
8508: RNCC: 3 | RNVC: 2

25 Aug 1976

5340-21-001-3809
Corrosion Preventive Anode

210013809
5340STD137: RNCC: 3 | RNVC: 1
5340STD137PC1TYPEC: RNCC: 3 | RNVC: 1
5340STD137PC1TYPECANDPC2ANDPC3: RNCC: 3 | RNVC: 2

25 May 1968

5340-21-908-3383
Mounting Bracket

219083383
8778096: RNCC: 3 | RNVC: 2

30 Oct 1991

5340-20-008-9873

5340-21-868-8158
Mortise Lock Set

218688158
A70PDPLY32D: RNCC: 3 | RNVC: 2

15 Dec 1972