What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

Hardware, Commercial - Canada (CA)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Canada (CA) - NCB is 20 or 21

Page 31 of 64

NSN Format for Hardware, Commercial
Codified by Canada

53	40	21	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Canada (CA)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 190 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 63 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 26 Items
What is a Rod End Connector? 44 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 69 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 226 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 94 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 20 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 582 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 43 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 202 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 65 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Shelf Bracket? 33 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Door Hook And Eye? 22 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 77 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 12 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 23 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 23 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 44 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 13 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is a Friction Catch? 38 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 15 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 39 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 26 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 86 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 20 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 42 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 91 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 57 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 25 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 163 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 101 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 21 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 16 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 288 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 52 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 23 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 131 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 24 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 41 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 70 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 45 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 210 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 163 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 82 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 44 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 38 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 25 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 20 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 42 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 18 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Glazier Point? 10 Items: A Glazier Point (POINT,GLAZIER) is a piece of thin sheet metal, triangular or diamond shaped, designed to hold a pane of glass in a wooden sash.
What is an Angle Bracket? 1105 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 81 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 32 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1130 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 20 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 49 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 37 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Quick Release Plunger? 13 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 114 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flush Catch? 97 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 13 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 86 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 115 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 177 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 24 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 53 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 219 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 40 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 494 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 353 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 55 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 51 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 12 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 601 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 32 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 39 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 34 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 41 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 21 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping? 19 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 93 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 117 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 31 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 45 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 19 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 832 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 35 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 40 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 75 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 106 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Picture Hanger? 10 Items: A Picture Hanger (HANGER,PICTURE) is a hook like device that is secured to walls, bulkheads, columns and the like, by means of a nail, screw, magnet or adhesive backed cloth, that is included with and/or attached to the hook. It is designed to hold and suspend variuos items such as photographs, paintings, maps, documents, etc.
What is a Protection Bellows? 16 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 57 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 49 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 2535 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 19 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 16 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 1222 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 48 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 64 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Threaded Hinged Standoff? 11 Items: A Threaded Hinged Standoff (STANDOFF,HINGED,THREADED) is a standoff, internally and/or externally, threaded on both ends with a hinge or pivot point to allow for independent movement of the ends.
What is a Spacing Threaded Standoff? 178 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 115 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a Crank Handle? 13 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 29 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Mechanic Equipment Hardware Kit? 87 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Dust And Moisture Seal Protective Cover? 38 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 51 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 308 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 41 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 39 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 178 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 27 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 80 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 86 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 31 of 64

5340-21-859-0859
Clevis

218590859
4014T62P01: RNCC: 3 | RNVC: 2

18 Jun 1970

5340-21-713-0037

5340-21-802-5407

5340-21-660-0391
Butt Hinge

216600391
NHF191 4 X 4: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-004-0409
Mounting Plate

200040409
9283387-1: RNCC: 3 | RNVC: 2

17 Apr 2008

5340-21-895-0876

5340-21-913-4657
Access Cover

219134657
10618277: RNCC: 3 | RNVC: 2

10 Jun 1997

5340-21-921-3807
Mounting Plate

219213807
9379797-1: RNCC: 3 | RNVC: 2

25 Oct 2001

5340-21-851-0550

5340-21-877-3754
Strapping

218773754
SUSPENSI0N3-4: RNCC: 3 | RNVC: 2

8 Nov 1977

5340-21-897-8135
Loop Clamp

218978135
31236: RNCC: 3 | RNVC: 2
C-957PC: RNCC: 3 | RNVC: 2

12 Dec 1984

5340-20-003-8869
Mounting Plate

200038869
10626041-PW: RNCC: 3 | RNVC: 2

4 Feb 2008

5340-21-864-2500
Barrel Bolt

218642500
1078: RNCC: 3 | RNVC: 1
1078US2G-2 1/2: RNCC: 3 | RNVC: 2
1078C2G-2 1/2: RNCC: 3 | RNVC: 2

13 Jan 1972

5340-20-000-1937
Webbing Strap

200001937
9379298-1: RNCC: 3 | RNVC: 2

5 Jun 2002

5340-20-000-2305
Adapter Bracket Ass

200002305
9379593-1: RNCC: 3 | RNVC: 2

18 Jun 2002

5340-21-660-1871
Turnbuckle

216601871
303: RNCC: 3 | RNVC: 1
303X5/8-9: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-853-7278

5340-21-893-8168
Retaining Strap

218938168
CN190105: RNCC: 3 | RNVC: 2

6 Mar 1984

5340-21-799-3256

5340-21-802-5627

5340-21-801-2949

5340-21-660-0504
Hinged Hasp

216600504
912RBP: RNCC: 3 | RNVC: 1
912C2HBP-3: RNCC: 3 | RNVC: 2
131-4413: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-905-5779
Pawl Fastener

219055779
1319110/2: RNCC: 3 | RNVC: 2

29 Nov 1989

5340-21-920-8296
General Purpose Access Door

219208296
9378481-1: RNCC: 3 | RNVC: 2

6 Oct 2000

5340-21-815-2592
Screw Thread Insert

218152592
0-0: RNCC: 3 | RNVC: 2

9 Jun 1964

5340-21-895-0628
Door Spring Stay As

218950628
537A: RNCC: 3 | RNVC: 2

11 Mar 1984

5340-20-005-9206
Turnbuckle

200059206
352345: RNCC: 3 | RNVC: 2

18 Nov 2010

5340-21-112-9558

5340-21-908-4086

5340-21-002-4721

5340-20-003-7404
Rack Assembly

200037404
541886: RNCC: 3 | RNVC: 2

20 Nov 2007

5340-21-860-9375

5340-20-005-0013
Retaining Strap

200050013
DRZ7408: RNCC: 3 | RNVC: 2

5 Aug 2009

5340-21-866-4618

5340-21-866-9052
Sliding Door Hanger

218669052
226: RNCC: 3 | RNVC: 2

16 Jun 1972

5340-20-003-2890
Locki Pylon Mandrel

200032890
379-730060-005: RNCC: 3 | RNVC: 2
379-730060-005: RNCC: 5 | RNVC: 2
379-730060-005: RNCC: 5 | RNVC: 2

2 Apr 2007

5340-21-798-8712

5340-21-800-2955

5340-21-868-9186

5340-21-848-2153
Combination Lock

218482153
T8415MP: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-805-0358

5340-21-114-7066

5340-21-803-8787

5340-20-007-2478
Rod End Clevis

200072478
35884: RNCC: 3 | RNVC: 2

7 Nov 2012

5340-21-818-2730
Flare Lock Fastener

218182730
6864: RNCC: 3 | RNVC: 2
6864: RNCC: 5 | RNVC: 2

13 May 1971

5340-21-660-1551
Mending Plate

216601551
0418: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-893-8212
Co Spindle Assembly

218938212
406419: RNCC: 3 | RNVC: 2

2 Oct 1983

5340-20-004-6294
Curtain Assembly

200046294
1237-198-1: RNCC: 3 | RNVC: 2

2 Mar 2009

5340-20-000-1931
Webbing Strap

200001931
9380350-1: RNCC: 3 | RNVC: 2

5 Jun 2002

5340-21-921-4447
Bracket Assembly.

219214447
8476881-1: RNCC: 3 | RNVC: 2

13 Nov 2001

5340-21-905-5514
Resilient Mount

219055514
C 3695 839-1: RNCC: 3 | RNVC: 2

5 May 1989

5340-21-891-6427
Pipe Bracket

218916427
TPH101: RNCC: 3 | RNVC: 2
UPC-1: RNCC: 5 | RNVC: 2

9 Apr 1983

5340-21-908-3988
Access Cover

219083988
K3-1555: RNCC: 3 | RNVC: 2

28 Mar 1992

5340-20-006-8061
Mounting Bracket

200068061
10687993-011PW: RNCC: 3 | RNVC: 2

23 Mar 2012

5340-21-908-4851
Mounting Plate

219084851
1061V: RNCC: 3 | RNVC: 2

31 Oct 1992

5340-21-862-6136
Bow Handle

218626136
482: RNCC: 3 | RNVC: 1
482C2GN03: RNCC: 3 | RNVC: 2

15 Jul 1971

5340-21-905-5236
Retaining Strap

219055236
373017: RNCC: 3 | RNVC: 2

22 Oct 1988

5340-21-817-9282

5340-21-817-9293

5340-21-817-9310

5340-21-908-0610
Pad Eye

219080610
M1521405: RNCC: 3 | RNVC: 2
2401-5214.05: RNCC: 5 | RNVC: 2

23 Feb 1991

5340-21-877-3401
Expansion Plug

218773401
31570: RNCC: 3 | RNVC: 2

18 Oct 1977

5340-21-108-8860
Butt Hinge

211088860
ZFFV128716: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-900-1347
Clamp

219001347
8540343: RNCC: 3 | RNVC: 2

5 Dec 1985

5340-20-001-8081
Turnbuckle

200018081
024-523: RNCC: 3 | RNVC: 2

6 Jan 2005

5340-21-810-0233

5340-21-810-0232

5340-21-898-4391

5340-21-914-8611
Double Angle Bracket

219148611
1237-214-1: RNCC: 3 | RNVC: 2

30 Jul 1998

5340-20-000-3815
Mounting Bracket

200003815
9379710-1: RNCC: 3 | RNVC: 2

5 Sep 2002

5340-21-911-1425
Mounting Plate

219111425
CA0 10 051: RNCC: 3 | RNVC: 2

12 Jan 1994

5340-20-000-9454
Mounting Plate

200009454
10651936-001PEG: RNCC: 3 | RNVC: 2

12 Aug 2003

5340-21-913-0104
Mounting Bracket

219130104
135730-1: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-21-913-6492
Angle Bracket

219136492
9575834-1: RNCC: 3 | RNVC: 2

31 Jan 1997

5340-20-005-7826
Angle Bracket

200057826
6332C354-1: RNCC: 3 | RNVC: 2

9 Aug 2010

5340-21-893-8065
Retaining Strap

218938065
512206-2411: RNCC: 3 | RNVC: 2

27 Aug 1983

5340-20-003-4234
Access Cover

200034234
3113507-01: RNCC: 3 | RNVC: 2

22 Jun 2007

5340-21-891-6398
Spindle And Pin Ass

218916398
K110-534: RNCC: 3 | RNVC: 2

9 Apr 1983

5340-20-000-2954
Mounting Bracket

200002954
10654301-011: RNCC: 3 | RNVC: 2

23 Jul 2002

5340-21-908-0144
Headless Straight Rod

219080144
B87-1086B: RNCC: 3 | RNVC: 2
B87-1086: RNCC: 5 | RNVC: 2

2 Oct 1990

5340-21-901-8942
Retaining Strap

219018942
NR.120102079: RNCC: 3 | RNVC: 2
W4631334: RNCC: 5 | RNVC: 2

24 Feb 1988

5340-21-884-0025
Angle Bracket

218840025
C4B175135: RNCC: 3 | RNVC: 2

13 Nov 1980

5340-21-911-1130
Mounting Plate

219111130
9276329: RNCC: 3 | RNVC: 2

7 Oct 1993

5340-21-882-8669
Angle Bracket

218828669
AP669930: RNCC: 3 | RNVC: 2

10 Sep 1980

5340-21-905-5268
Angle Bracket

219055268
7539671: RNCC: 3 | RNVC: 2
8281256-1: RNCC: 3 | RNVC: 2
1185N2: RNCC: 3 | RNVC: 2
955415: RNCC: 3 | RNVC: 2
G742-7539671: RNCC: 6 | RNVC: 9
1507539671: RNCC: 6 | RNVC: 9

5 Nov 1988

5340-21-817-7839

5340-21-811-0541

5340-20-000-9249
Manual Control Handle

200009249
10656742-001PEW: RNCC: 3 | RNVC: 2

5 Aug 2003

5340-21-815-2598
Screw Thread Insert

218152598
364-1014P2: RNCC: 3 | RNVC: 2

19 Apr 1967

5340-21-920-0034
Mounting Plate

219200034
9775257-1: RNCC: 3 | RNVC: 2

18 Feb 1999

5340-21-913-0083
Mounting Bracket

219130083
9276346-1: RNCC: 3 | RNVC: 2

1 Mar 1996

5340-21-864-1140
Cane Bolt

218641140
1010: RNCC: 3 | RNVC: 1
N0PARTN0: RNCC: 3 | RNVC: 1
1010 C2H 3/4X24: RNCC: 3 | RNVC: 2
69GP6: RNCC: 4 | RNVC: 1

18 Nov 1971

5340-21-880-7946
Barrel Bolt

218807946
1076C2G2: RNCC: 3 | RNVC: 2

2 Apr 1980

5340-21-847-0999
Mirror Holder

218470999
642A: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-002-6070
Access Cover

200026070
3111952-01: RNCC: 3 | RNVC: 2

3 Apr 2006

5340-21-914-9174
Cushioning Pad

219149174
500-71000-001: RNCC: 3 | RNVC: 2

16 Oct 1998

5340-20-000-3504
Mounting Bracket

200003504
10656454-011PEW: RNCC: 3 | RNVC: 2

21 Aug 2002

5340-20-003-1681
Mounting Plate

200031681
10665297-011PW: RNCC: 3 | RNVC: 2

19 Jan 2007

5340-20-005-5813
Mounting Bracket

200055813
AC40316-05: RNCC: 3 | RNVC: 2

17 May 2010

5340-20-001-5603
Mounting Bracket

200015603
9477711-1: RNCC: 3 | RNVC: 2
DL-9477711-1: RNCC: 6 | RNVC: 9
9477711: RNCC: D | RNVC: 9

13 Aug 2004

5340-20-004-4786
Mounting Plate

200044786
0777884-1: RNCC: 3 | RNVC: 2
0777884: RNCC: 5 | RNVC: 1

9 Jan 2009

5340-21-879-5870
Electrical-Mechanical Equipment Post

218795870
84000102: RNCC: 3 | RNVC: 2

13 Mar 1979

5340-21-908-3936
General Purpose Resilient Mount

219083936
75-143-00: RNCC: 3 | RNVC: 2

27 Feb 1992

5340-20-002-0983
Access Cover

200020983
GC426-0130-5: RNCC: 3 | RNVC: 2

1 Jun 2005

5340-20-002-4976
Mechanical Latch

200024976
EZ-634: RNCC: 3 | RNVC: 2

7 Feb 2006

5340-20-006-8485
Mounting Plate

200068485
10657001-001: RNCC: 3 | RNVC: 2
10657001: RNCC: D | RNVC: 9

17 Apr 2012

5340-20-001-2085
Mounting Plate

200012085
10658475-001PG: RNCC: 3 | RNVC: 2
10658475: RNCC: D | RNVC: 9

16 Jan 2004

5340-20-006-1284
Loop Clamp

200061284
079-225: RNCC: 3 | RNVC: 2

21 Feb 2011

5340-21-852-2839
Fusible Plug

218522839
42211102: RNCC: 3 | RNVC: 2
4471ITEM695: RNCC: 5 | RNVC: 2

17 Jun 1971

5340-21-859-3463
Angle Bracket

218593463
549166: RNCC: 3 | RNVC: 2

16 Jul 1970

5340-21-908-0152
Lh Catch Assembly

219080152
B3513 172 4198: RNCC: 3 | RNVC: 2

21 Sep 1990

5340-21-855-4560

5340-21-855-2752

5340-21-888-1639
Extension Drawer Slide Section

218881639
T335006501: RNCC: 3 | RNVC: 2

12 Feb 1982

5340-20-003-7343
Mounting Bracket

200037343
10655455-011: RNCC: 3 | RNVC: 2

15 Nov 2007

5340-21-896-9587
Butt Hinge

218969587
FBB199: RNCC: 3 | RNVC: 1
FBB199: RNCC: 3 | RNVC: 1
FBB199-4.500 BY 4.500: RNCC: 3 | RNVC: 2
FBB199-4.500 BY 4.500: RNCC: 3 | RNVC: 2

23 Sep 1984

5340-21-865-9095
Support Clamp

218659095
26-3741: RNCC: 3 | RNVC: 2

14 Apr 1972

5340-21-910-8747
Strap Hinge

219108747
TE10003946-004: RNCC: 3 | RNVC: 2

25 Jun 1993

5340-20-006-8951
Handwheel

200068951
MVHB: RNCC: 3 | RNVC: 2

14 May 2012

5340-21-888-1638
Extension Drawer Slide Section

218881638
L335000040: RNCC: 3 | RNVC: 2

12 Feb 1982

5340-21-855-1412
Resilient Mount

218551412
S3B500: RNCC: 3 | RNVC: 2

23 Jul 1969

5340-21-891-6819
Loop Clamp

218916819
343440: RNCC: 3 | RNVC: 2

18 Jun 1983

5340-20-001-8342
Mounting Bracket

200018342
GS215-0204-3: RNCC: 3 | RNVC: 2
GS215-0204: RNCC: D | RNVC: 9

18 Jan 2005

5340-21-911-9199
Angle Bracket

219119199
CF8483413: RNCC: 3 | RNVC: 2

30 Jul 1994

5340-21-862-6596
Mortise Lock Set

218626596
D51PDXPLY: RNCC: 3 | RNVC: 1
7645AS: RNCC: 3 | RNVC: 1
LF5407: RNCC: 3 | RNVC: 1
132-3612: RNCC: 6 | RNVC: 9

14 Oct 1971

5340-20-004-8334
General Purpose Resilient Mount

200048334
0677666-1: RNCC: 3 | RNVC: 2
0677666: RNCC: 5 | RNVC: 1

25 May 2009

5340-20-003-1728
Angle Bracket

200031728
10666115-001PG: RNCC: 3 | RNVC: 2
10666115-001: RNCC: 5 | RNVC: 1

23 Jan 2007

5340-21-908-4930
Webbing Strap

219084930
9117123-1: RNCC: 3 | RNVC: 2

9 Dec 1992

5340-20-003-9470
Anti Vortex Plate

200039470
9776053-1: RNCC: 3 | RNVC: 2

10 Mar 2008

5340-20-005-7279
In Cable Pass Cover

200057279
10676495-001PG: RNCC: 3 | RNVC: 2

15 Jul 2010

5340-20-004-8767
Access Cover

200048767
10675485-011PEG: RNCC: 3 | RNVC: 2
10675485: RNCC: 5 | RNVC: 1

5 Jun 2009

5340-21-880-7991
Barrel Bolt

218807991
46-0512: RNCC: 3 | RNVC: 2

9 Apr 1980

5340-20-006-7334
Access Cover

200067334
10652709-011PEW: RNCC: 3 | RNVC: 2
10652709: RNCC: D | RNVC: 9

13 Feb 2012

5340-20-000-1951
Tie Down Bracket

200001951
9380411-1: RNCC: 3 | RNVC: 2

6 Jun 2002

5340-21-660-2144
Rim Lock Set

216602144
0-0: RNCC: 3 | RNVC: 1

25 May 1968

5340-21-921-4210
Loop Clamp

219214210
ST1478-11: RNCC: 3 | RNVC: 2

7 Nov 2001

5340-21-868-9159
Butt Hinge Leaf

218689159
C6Z1801-41: RNCC: 3 | RNVC: 2

30 Apr 1974

5340-21-905-5553
Angle Bracket

219055553
CF 349 788A: RNCC: 3 | RNVC: 2

13 May 1989

5340-21-868-9493
Friction Catch

218689493
9714: RNCC: 3 | RNVC: 2

2 Aug 1974

5340-20-007-4592
Strap Fastener Loop

200074592
10552526-8: RNCC: 3 | RNVC: 2

12 Feb 2013

5340-21-876-1893
Electrical-Mechanical Equipment Post

218761893
148670-1: RNCC: 3 | RNVC: 2

19 Jul 1977

5340-21-878-0184
Bracket

218780184
00766380: RNCC: 3 | RNVC: 2

17 Jan 1978

5340-20-004-2731
Mounting Bracket

200042731
0875030: RNCC: 3 | RNVC: 2

5 Sep 2008

5340-20-003-4704
Mounting Plate

200034704
615-21119-11: RNCC: 3 | RNVC: 2

19 Jul 2007

5340-21-820-6115

5340-21-712-6702

5340-21-866-9035
Butt Hinge

218669035
257: RNCC: 3 | RNVC: 1

16 Jun 1972

5340-21-846-8457
Antipilferage Seal

218468457
62: RNCC: 3 | RNVC: 1

6 Jun 1968

5340-21-914-8614
Handle Spindle

219148614
2482-69-1: RNCC: 3 | RNVC: 2

30 Jul 1998

5340-21-908-0961
Spring Tension Clip

219080961
407 282 113 006-1: RNCC: 3 | RNVC: 2

23 Aug 1991

5340-21-908-0210
Access Door

219080210
WW329978-U: RNCC: 3 | RNVC: 2
591.29.06.A: RNCC: 5 | RNVC: 2

6 Oct 1990

5340-20-000-1768
Spreader Plate

200001768
9379765-1: RNCC: 3 | RNVC: 2

30 May 2002

5340-21-840-9339

5340-21-491-0271

5340-21-914-1612
Rod End Clevis

219141612
215-T90823: RNCC: 3 | RNVC: 2

21 Jun 1997

5340-21-920-0531
Webbing Bracket

219200531
10606895: RNCC: 3 | RNVC: 2

26 Mar 1999

5340-20-005-7219
Angle Bracket

200057219
B40603-206-1: RNCC: 3 | RNVC: 2

12 Jul 2010

5340-20-000-3601
Mounting Bracket

200003601
10657148-001PEW: RNCC: 3 | RNVC: 2

23 Aug 2002

5340-20-007-6788
Mounting Bracket

200076788
10693976-011PW: RNCC: 3 | RNVC: 2
10693976: RNCC: D | RNVC: 9

28 May 2013

5340-21-921-2399
Webbing Strap

219212399
0078459-1: RNCC: 3 | RNVC: 2

17 Jul 2001

5340-21-900-1352
Catch Strike

219001352
028-562: RNCC: 3 | RNVC: 2

5 Dec 1985

5340-21-908-3824
Mounting Bracket

219083824
CF 814 565 A: RNCC: 3 | RNVC: 2

24 Jan 1992

5340-21-882-8683
Electrical-Mechanical Equipment Post

218828683
AP643000EE: RNCC: 3 | RNVC: 2

10 Sep 1980

5340-21-851-0138
Loop Clamp

218510138
737-7-2-8: RNCC: 3 | RNVC: 2
5340-0253: RNCC: 6 | RNVC: 9

2 Aug 1968

5340-20-001-9972
Mounting Bracket

200019972
2093-0001: RNCC: 3 | RNVC: 2

26 Apr 2005

5340-21-920-2299
Mounting Plate

219202299
AED69793-1: RNCC: 3 | RNVC: 2
AED69793-1: RNCC: 5 | RNVC: 9

13 Jul 1999

5340-20-002-4093
Bonding Strap

200024093
130014BS901-1: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-21-866-9485
Expansion Shield

218669485
3635-2: RNCC: 3 | RNVC: 2

14 Jul 1972

5340-21-908-5176
Manual Control Lever

219085176
F401B: RNCC: 3 | RNVC: 2

24 Feb 1993

5340-21-921-7173
Mounting Bracket

219217173
10626909-PW: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-21-913-0103
Mounting Bracket

219130103
10554032: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-21-913-2951
Dust And Moisture Seal Protective Plug

5340-21-920-2715
Latch Assy

219202715
10558009: RNCC: 3 | RNVC: 2

9 Aug 1999

5340-21-920-6884
Handle Grip

219206884
10-4855-AU: RNCC: 3 | RNVC: 2

13 Jun 2000

5340-21-913-6441
Access Cover

219136441
10557621: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-21-913-6471
Mounting Plate

219136471
10552481: RNCC: 3 | RNVC: 2

7 Jan 1997

5340-21-914-9131
Access Cover

219149131
10552704-PT: RNCC: 3 | RNVC: 2

4 Sep 1998

5340-20-010-9773

5340-20-010-8493

5340-21-914-9917
Access Cover

219149917
10616656: RNCC: 3 | RNVC: 2

6 Mar 1999

5340-21-908-3630
Mounting Plate

219083630
100711-1: RNCC: 3 | RNVC: 2

21 Dec 1991

5340-21-809-1319
Dust And Moisture Seal Protective Cap

218091319
792454-1: RNCC: 3 | RNVC: 2

24 Jun 1963

5340-21-876-2169
Hinge Doubler

218762169
1730-0420: RNCC: 3 | RNVC: 2

20 Sep 1977

5340-21-920-0146
Mounting Bracket

219200146
10618411: RNCC: 3 | RNVC: 2

10 Mar 1999

5340-21-855-1414
Resilient Mount

218551414
S2A10: RNCC: 3 | RNVC: 2

23 Jul 1969

5340-21-851-4682
Swivel Caster

218514682
R300: RNCC: 3 | RNVC: 2

6 Oct 1968

5340-21-920-0521
Top Buffer

219200521
10618418: RNCC: 3 | RNVC: 2

24 Mar 1999

5340-21-862-6217
Key Blank

218626217
L54WA: RNCC: 3 | RNVC: 2

16 Sep 1971

5340-21-920-1338
Plug

219201338
9859148: RNCC: 3 | RNVC: 2
9859148: RNCC: D | RNVC: 9

19 May 1999

5340-21-860-7483
Bracket

218607483
212-076-129-001: RNCC: 3 | RNVC: 2
212-076-129-1: RNCC: 5 | RNVC: 2

14 Jan 1971

5340-21-891-6253
Angle Bracket

218916253
8280668: RNCC: 3 | RNVC: 2
8280668-1: RNCC: 3 | RNVC: 2
16016002700: RNCC: 5 | RNVC: 2

21 Mar 1983

5340-21-888-8569
Mortise Lock Set

218888569
C53PDPLY630: RNCC: 3 | RNVC: 2

2 May 1982

5340-21-901-8484
Retaining Clip

219018484
4745: RNCC: 3 | RNVC: 2

30 Jan 1987

5340-21-866-9551
Retaining Clip

218669551
313816: RNCC: 3 | RNVC: 2

14 Jul 1972

5340-21-842-6345
Sash Balance

218426345
10A: RNCC: 3 | RNVC: 2
130-2075: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-915-0145
Catch Strike

219150145
10618380: RNCC: 3 | RNVC: 2

10 May 1999

5340-21-879-5577
Rim Clenching Clamp

218795577
M4371-31: RNCC: 3 | RNVC: 2
69375-03-5-607M4371-31: RNCC: 3 | RNVC: 2

21 Nov 1978

5340-20-006-4423
Mod Kit For Stbd Sp

200064423
100406-1812-ASY: RNCC: 3 | RNVC: 2
WSH1022874: RNCC: 5 | RNVC: 9

2 Aug 2011

5340-21-882-8392
Hand Crank

218828392
CP04783: RNCC: 3 | RNVC: 2

3 Jul 1980

5340-20-002-4969
Loop Clamp

200024969
3035176: RNCC: 3 | RNVC: 2

7 Feb 2006

5340-21-888-7547
Butt Hinge

218887547
1 1/16X72: RNCC: 3 | RNVC: 2

14 Mar 1982

5340-20-007-3745
Lock-Release Lever

200073745
960498: RNCC: 3 | RNVC: 2

9 Jan 2013

5340-21-818-8585
Spring Tension Clip

218188585
42P209172: RNCC: 3 | RNVC: 2

21 Jan 1965

5340-21-859-1256
End Handle

218591256
3814L: RNCC: 3 | RNVC: 2
3814L: RNCC: 3 | RNVC: 2

18 Jun 1970

5340-21-893-8095
Loop Clamp

218938095
2071276: RNCC: 3 | RNVC: 2
35799: RNCC: 5 | RNVC: 2

3 Sep 1983

5340-20-004-3891
Mounting Bracket

200043891
10674274-011PG: RNCC: 3 | RNVC: 2
10674274: RNCC: 5 | RNVC: 1

7 Nov 2008

5340-20-007-2980
Angle Bracket

200072980
TE20021108-100: RNCC: 3 | RNVC: 2

3 Dec 2012

5340-21-886-2438
Butt Hinge

218862438
2510US1B: RNCC: 3 | RNVC: 2

4 Aug 1981

5340-20-005-2783
Mounting Bracket

200052783
0656-039975-10: RNCC: 3 | RNVC: 2

27 Jan 2010

5340-21-908-3980
Angle Bracket

219083980
701-433100-903-2: RNCC: 3 | RNVC: 2

4 Apr 1992

5340-20-007-0757
Mounting Bracket

200070757
MM-7224-0-D/3: RNCC: 3 | RNVC: 2

13 Aug 2012

5340-21-908-4145
Metal Grille

219084145
WL321516AR: RNCC: 3 | RNVC: 2

30 May 1992

5340-21-895-0511
Spring Tension Clip

218950511
9056: RNCC: 3 | RNVC: 2

20 Feb 1984

5340-21-886-5805
Expansion Shield

218865805
3235: RNCC: 3 | RNVC: 2

31 Aug 1981

5340-21-908-0169
Mounting Bracket

219080169
3513 132 7496: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-21-884-0318
Window Regulator Handle

218840318
396Z69LH: RNCC: 3 | RNVC: 2

24 Dec 1980

5340-21-910-8895
Retaining K Support

219108895
702-139205-934-0: RNCC: 3 | RNVC: 2

25 Aug 1993

5340-21-921-5408
Mounting Bracket

219215408
1756-023-1: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-20-000-9247
Double Angle Bracket

200009247
10652454-001PEW: RNCC: 3 | RNVC: 2

5 Aug 2003

5340-21-884-0625
Seat Bracket

218840625
7187: RNCC: 3 | RNVC: 2

24 Feb 1981

5340-20-003-3699
Spring Tension Clip

200033699
701039: RNCC: 3 | RNVC: 2

28 May 2007

5340-21-921-2995
Mounting Bracket

219212995
270069: RNCC: 3 | RNVC: 2

17 Sep 2001

5340-21-866-4026
Door Closer

218664026
593F: RNCC: 3 | RNVC: 1

19 May 1972

5340-21-866-9107
Butt Hinge

218669107
984: RNCC: 3 | RNVC: 2

16 Jun 1972

5340-21-878-0645
Pawl Fastener

218780645
N28346: RNCC: 3 | RNVC: 2

7 Mar 1978

5340-21-814-6288
Clip

218146288
49457: RNCC: 3 | RNVC: 2

9 Jun 1964

5340-21-798-8188
Resilient Mount

217988188
B237104: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-865-2114
Dust And Moisture Seal Protective Plug

218652114
P10ERA: RNCC: 3 | RNVC: 2

17 Mar 1972

5340-21-860-7920
Plug Button

218607920
SS48143K1110: RNCC: 3 | RNVC: 2

18 Feb 1971

5340-21-920-8859
Mounting Plate

219208859
10639196-PW: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-21-911-8277
Angle Bracket

219118277
6300: RNCC: 3 | RNVC: 2

16 Apr 1994

5340-21-805-0894

5340-20-003-2891
Locki Pylon Mandrel

200032891
379-730060-003: RNCC: 3 | RNVC: 2
379-730060-003: RNCC: 5 | RNVC: 2
379-730060-003: RNCC: 5 | RNVC: 2

2 Apr 2007

5340-21-913-4189
Angle Bracket

219134189
10627819-PW: RNCC: 3 | RNVC: 2
10627819: RNCC: D | RNVC: 9

7 Feb 1998

5340-21-921-7202
Angle Bracket

219217202
10654451-001PW: RNCC: 3 | RNVC: 2

28 Feb 2002

5340-20-007-0587
Mounting Bracket

200070587
10695164-001PEW: RNCC: 3 | RNVC: 2

1 Aug 2012

5340-20-004-6337
Cinch Strap

200046337
BB712: RNCC: 3 | RNVC: 2

3 Mar 2009

5340-21-921-5680
Mounting Bracket

219215680
10651933-001-PW: RNCC: 3 | RNVC: 2

17 Jan 2002

5340-21-660-1883
Turnbuckle

216601883
304: RNCC: 3 | RNVC: 1
304X1/2-12: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-006-8791
Bumper

200068791
100350000: RNCC: 3 | RNVC: 2

4 May 2012

5340-21-846-1591
Key Blank

218461591
L191A: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-007-5808
Access Door Hinge

200075808
10639676: RNCC: 3 | RNVC: 2

15 Apr 2013

5340-21-876-1928
Latch Assembly

218761928
172864-1: RNCC: 3 | RNVC: 2

2 Aug 1977

5340-21-908-4931
Webbing Strap

219084931
9117123-2: RNCC: 3 | RNVC: 2

9 Dec 1992

5340-21-913-0111
Extension Drawer Slide Section

219130111
RKSDVR: RNCC: 3 | RNVC: 2

13 Mar 1996

5340-21-911-8861
Access Cover

219118861
REF NOT ON FILE: RNCC: 3 | RNVC: 2

19 May 1994

5340-21-896-2430
Helical Compression Spring Seat

218962430
30EN92: RNCC: 3 | RNVC: 2

8 Jul 1984

5340-21-908-0093
Nonmetallic Bumper

219080093
8711853-1: RNCC: 3 | RNVC: 2

27 Jul 1990

5340-20-002-9099
Webbing Strap

200029099
9279915-1: RNCC: 3 | RNVC: 2

5 Sep 2006

5340-20-000-2461
Mounting Plate

200002461
9379120-1: RNCC: 3 | RNVC: 2

25 Jun 2002

5340-21-847-5912
Furniture Glide

218475912
CG91: RNCC: 3 | RNVC: 2
45002: RNCC: 3 | RNVC: 2

14 Oct 1971

5340-21-857-8568
Wire Clip

218578568
B7005: RNCC: 3 | RNVC: 2

12 Mar 1970

5340-20-000-8971
Angle Bracket

200008971
99112360210: RNCC: 3 | RNVC: 2
991 12 36 0210: RNCC: 5 | RNVC: 2

17 Jul 2003

5340-21-877-3729
Door Holder

218773729
1232XC26D: RNCC: 3 | RNVC: 2

1 Nov 1977

5340-21-877-3787
Retaining Strap

218773787
315: RNCC: 3 | RNVC: 2

22 Nov 1977

5340-21-311-9416
Retaining Strap

213119416
J860-12: RNCC: 3 | RNVC: 1

6 Jun 1968

5340-21-911-1467
Seal Retaining Plate

219111467
3106794-01: RNCC: 3 | RNVC: 2

9 Feb 1994

5340-21-908-5013
Guard Cover

219085013
C6FS3632-29: RNCC: 3 | RNVC: 2

20 Jan 1993

5340-20-004-0783
Mending Plate

200040783
MS9552-008: RNCC: 3 | RNVC: 2

5 May 2008

5340-20-006-4780
Mounting Plate

200064780
85420038-103: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-20-004-4852
Mounting Bracket

200044852
0677455-1: RNCC: 3 | RNVC: 2
0677455: RNCC: 5 | RNVC: 1

13 Jan 2009

5340-21-905-5202
Vent Plug

219055202
BV444631: RNCC: 3 | RNVC: 2

20 Oct 1988

5340-21-853-5792

5340-21-857-7502

5340-21-857-5019

5340-21-905-5556
Retaining Strap

219055556
CF 415 261A: RNCC: 3 | RNVC: 2

13 May 1989

5340-21-819-7317
Butt Hinge

218197317
MS20257C1-7200: RNCC: 2 | RNVC: 2
AN257C1-7200: RNCC: 3 | RNVC: 2

1 Mar 1965

5340-20-007-6410
Mounting Bracket

200076410
10691355-011PG: RNCC: 3 | RNVC: 2
10691355: RNCC: D | RNVC: 9

9 May 2013

5340-20-004-9958
Mounting Plate

200049958
10672264-001PW: RNCC: 3 | RNVC: 2
10672264: RNCC: D | RNVC: 9

3 Aug 2009

5340-20-000-2145
Grab Bar

200002145
9379096-1: RNCC: 3 | RNVC: 2

12 Jun 2002

5340-21-868-8607
Dust And Moisture Seal Protective Cap

218688607
1 1-2SC: RNCC: 3 | RNVC: 2

20 Sep 1973

5340-20-004-3280
Lid Support

200043280
3000491: RNCC: 3 | RNVC: 2
3000491: RNCC: 3 | RNVC: 9

1 Oct 2008

5340-21-870-9398
Loop Clamp

218709398
3815761: RNCC: 3 | RNVC: 2

9 Dec 1975

5340-20-000-4780
Mounting Bracket

200004780
10627550: RNCC: 3 | RNVC: 2

22 Oct 2002

5340-20-003-4317
Adjustment Slide

200034317
1825-316SS: RNCC: 3 | RNVC: 2

28 Jun 2007

5340-21-896-2141
Catch Strike

218962141
7199: RNCC: 3 | RNVC: 2

27 May 1984

5340-21-920-2635
Access Cover

219202635
259420-901: RNCC: 3 | RNVC: 2

30 Jul 1999

5340-21-912-3312
Spacing Threaded Standoff

219123312
RS 412 082A: RNCC: 3 | RNVC: 2

30 Mar 1995

5340-21-860-5245
Butt Hinge

218605245
BB180: RNCC: 3 | RNVC: 1
BB180 4-1/2X4-1/2: RNCC: 3 | RNVC: 2

15 Oct 1970

5340-21-808-3033
Antipilferage Seal

218083033
51: RNCC: 3 | RNVC: 2

23 May 1963

5340-21-878-0226
Plug Button

218780226
KP150: RNCC: 3 | RNVC: 2

12 Jan 1978

5340-21-841-8027

5340-21-841-8866

5340-20-004-7453
Angle Bracket

200047453
542169-1: RNCC: 3 | RNVC: 2
542169: RNCC: 5 | RNVC: 1

16 Apr 2009

5340-21-921-1471
Key Blank

219211471
DA-05053-02/GR-4: RNCC: 3 | RNVC: 2

14 May 2001

5340-21-912-9760
Latch Bar

219129760
13114-4: RNCC: 3 | RNVC: 2

11 Jan 1996

5340-20-004-0413
Slider Assembly

200040413
0977311-1: RNCC: 3 | RNVC: 2

17 Apr 2008

5340-21-905-5230
Spring Tension Clip

219055230
WL320974A: RNCC: 3 | RNVC: 2

19 Oct 1988

5340-21-882-8805
Electrical-Mechanical Equipment Post

218828805
AP643000EA: RNCC: 3 | RNVC: 2

24 Sep 1980

5340-21-908-3617
Mounting Bracket

219083617
CF826082AE: RNCC: 3 | RNVC: 2

18 Dec 1991

5340-21-891-5049
Retaining Strap

218915049
HC2: RNCC: 3 | RNVC: 2
HC2: RNCC: 3 | RNVC: 2

21 Nov 1982

5340-21-901-8135
Rear Handle

219018135
40G0107201: RNCC: 3 | RNVC: 2

20 May 1986

5340-21-660-1942

5340-21-815-6633

5340-20-006-0046
Mounting Bracket

200060046
0656-040233-12: RNCC: 3 | RNVC: 2

17 Dec 2010

5340-20-006-3879
Rh Panel

200063879
85311469-101: RNCC: 3 | RNVC: 2

28 Jun 2011

5340-20-000-1093
Loop Clamp

200001093
38863-0-C/002: RNCC: 3 | RNVC: 2
38863-0-C/2: RNCC: 5 | RNVC: 2

7 May 2002

5340-21-884-0111
Double Angle Bracket

218840111
46-57106: RNCC: 3 | RNVC: 2

26 Nov 1980

5340-21-920-0753
Dust And Moisture Seal Protective Plug

219200753
PK3282: RNCC: 3 | RNVC: 2

3 May 1999

5340-21-866-9765
Nonmetallic Bumper

218669765
875379: RNCC: 3 | RNVC: 2
875379: RNCC: 3 | RNVC: 2

14 Jul 1972

5340-20-001-0225
Access Cover

200010225
10657302-011: RNCC: 3 | RNVC: 2

10 Sep 2003

5340-21-891-6400
Bar And Pin Assembl

218916400
K110-625RH: RNCC: 3 | RNVC: 2

9 Apr 1983

5340-21-920-9282
General Purpose Resilient Mount

219209282
IT2083-R-1: RNCC: 3 | RNVC: 2

27 Nov 2000

5340-20-003-5991
Angle Bracket

200035991
0775856-1: RNCC: 3 | RNVC: 2

1 Oct 2007

5340-20-003-6023
Double Angle Bracket

200036023
0775862-1: RNCC: 3 | RNVC: 2

1 Oct 2007

5340-21-908-3379
Access Door

219083379
8914837-2: RNCC: 3 | RNVC: 2

12 Oct 1991

5340-21-913-0044
Assembly Bracket

219130044
9278272-1: RNCC: 3 | RNVC: 2

15 Jun 1996

5340-20-005-1124
Fixture Holding

200051124
PWC34598-2: RNCC: 3 | RNVC: 2

19 Oct 2009

5340-21-908-4512
Mounting Bracket

219084512
8559063-1: RNCC: 3 | RNVC: 2

18 Jul 1992

5340-21-719-3077
Loop Clamp

217193077
B6220-5: RNCC: 3 | RNVC: 2
AS4580-5: RNCC: 3 | RNVC: 2
N5: RNCC: 3 | RNVC: 2

26 Mar 1965

5340-20-000-7117
Bracket Assembly

200007117
0151157 DETAIL F: RNCC: 3 | RNVC: 2
0151157: RNCC: 6 | RNVC: 9

16 Apr 2003

5340-20-002-1169
Mounting Bracket

200021169
10655465-011: RNCC: 3 | RNVC: 2
10655465: RNCC: D | RNVC: 9

14 Jun 2005

5340-21-868-9906
Antipilferage Seal

218689906
4352: RNCC: 3 | RNVC: 2
4210-0112: RNCC: 6 | RNVC: 9

4 Feb 1975

5340-21-846-1073

5340-21-874-8470
Webbing Strap

218748470
8407: RNCC: 3 | RNVC: 2

25 Aug 1976

5340-21-870-9671
Spring Tension Clip

218709671
478176: RNCC: 3 | RNVC: 2

7 Jul 1976

5340-20-000-9404
Mounting Bracket

200009404
10652395-001PEW: RNCC: 3 | RNVC: 2

8 Aug 2003

5340-21-311-9603
Retaining Strap

213119603
14M6: RNCC: 3 | RNVC: 2
14M6: RNCC: 3 | RNVC: 2
14M6: RNCC: 3 | RNVC: 2
J-865: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-897-8641
Loop Clamp

218978641
MS21919-4: RNCC: 3 | RNVC: 2

13 Feb 1985

5340-21-859-0959
Resilient Mount

218590959
J9830-3: RNCC: 3 | RNVC: 2

18 Jun 1970

5340-21-913-9896
Corner Bracket

219139896
9279797-1: RNCC: 3 | RNVC: 2
9279797-1: RNCC: 5 | RNVC: 2

16 Aug 1997

5340-21-660-0193
Butt Hinge

216600193
291F: RNCC: 3 | RNVC: 1
291C4 2 1/2 X 2 1/2: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-913-8866
Angle Bracket

219138866
9575932-1: RNCC: 3 | RNVC: 2

18 Mar 1997

5340-21-911-1251
Half Grooved Segment

219111251
8577739-1: RNCC: 3 | RNVC: 2

11 Nov 1993

5340-21-910-8725
Angle Bracket

219108725
8668308-1: RNCC: 3 | RNVC: 2

1 Jul 1993

5340-21-880-7988
Tee Hinge

218807988
R18-7: RNCC: 3 | RNVC: 2

6 Aug 1980

5340-21-878-0144
Power Door Hinge

218780144
H171: RNCC: 3 | RNVC: 2

20 Dec 1977

5340-20-001-7941
Manual Control Handle

200017941
GM3-M6439A: RNCC: 3 | RNVC: 2

24 Dec 2004

5340-21-820-5523
Latch Assembly

218205523
117319: RNCC: 3 | RNVC: 2
750304: RNCC: 5 | RNVC: 2

30 Mar 1965

5340-21-660-1185
Screw Hook

216601185
5735: RNCC: 3 | RNVC: 2
131-8903: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-853-8261
Guide

218538261
R302-99T: RNCC: 3 | RNVC: 2

23 May 1969

5340-21-877-3455
Expansion Plug

218773455
31568: RNCC: 3 | RNVC: 2

8 Nov 1977

5340-21-911-9184
Electronic Equipment Hardware Kit

219119184
9375447: RNCC: 3 | RNVC: 2

22 Jul 1994

5340-21-840-9110
Butt Hinge

218409110
69GP1: RNCC: 2 | RNVC: 1
179C9 4 X 4: RNCC: 3 | RNVC: 2
179C9 4 X 4: RNCC: 3 | RNVC: 2
179A: RNCC: 5 | RNVC: 2

6 Jun 1968

5340-20-006-9274
Locking Stay

200069274
1850001-300: RNCC: 3 | RNVC: 2

31 May 2012

5340-20-003-7405
Mounting Bracket

200037405
542329: RNCC: 3 | RNVC: 2

20 Nov 2007

5340-20-008-0078
Mounting Bracket

200080078
10660528: RNCC: 3 | RNVC: 2

15 Oct 2013

5340-21-896-9884
Arm"H" Plate

218969884
78G-28: RNCC: 3 | RNVC: 2

4 Nov 1984

5340-21-882-8594
Electrical-Mechanical Equipment Post

218828594
980B383G01: RNCC: 3 | RNVC: 2
980B383-1: RNCC: 5 | RNVC: 2

30 Jul 1980

5340-20-004-0362
Door Assy

200040362
9877862-1: RNCC: 3 | RNVC: 2

15 Apr 2008

5340-20-001-2632
Dust And Moisture Seal Protective Plug

200012632
C4WM1760-1: RNCC: 3 | RNVC: 2

4 Feb 2004

5340-21-891-6163
Electrical-Mechanical Equipment Post

218916163
708235-3: RNCC: 3 | RNVC: 2

15 Mar 1983

5340-20-004-2603
Turnbuckle

200042603
P-7812CE: RNCC: 3 | RNVC: 2

26 Aug 2008

5340-21-891-3990
Door Latch Assembly

218913990
C6G1274-1: RNCC: 3 | RNVC: 2

24 Oct 1982

5340-21-908-0118
Spring Tension Clip

219080118
C 4196 516 A: RNCC: 3 | RNVC: 2

10 Aug 1990

5340-20-004-3127
Mounting Bracket

200043127
NTX-VT1: RNCC: 3 | RNVC: 2

25 Sep 2008

5340-21-660-0834
Sash Balance

216600834
182: RNCC: 3 | RNVC: 2
130-2122: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-004-0539
Elbow Block

200040539
7408-081-1: RNCC: 3 | RNVC: 2

25 Apr 2008

5340-21-911-9538
Mounting Bracket

219119538
9279923-1: RNCC: 3 | RNVC: 2

27 Sep 1994

5340-21-891-6708
General Purpose Resilient Mount

218916708
100PHL-2: RNCC: 3 | RNVC: 2

4 Jun 1983

5340-21-866-9330
Rubber Patch

218669330
0-0: RNCC: 3 | RNVC: 1

14 Jul 1972

5340-21-800-6666

5340-21-901-8615
Expansion Shield

219018615
4040: RNCC: 3 | RNVC: 2

16 Apr 1987

5340-20-005-7692
Double Angle Bracket

200057692
0477297-2: RNCC: 3 | RNVC: 2

6 Aug 2010

5340-21-868-8364
Mortise Lock Set

218688364
9: RNCC: 3 | RNVC: 2

19 Apr 1973

5340-20-003-9205
Recess Handle

200039205
9877963-1: RNCC: 3 | RNVC: 2
4907-1: RNCC: 5 | RNVC: 1

27 Feb 2008

5340-21-660-0208
Butt Hinge

216600208
195: RNCC: 3 | RNVC: 1
195 2 X 1 9/16: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-004-6262
Corrosion Preventive Anode

210046262
5340STD100-95: RNCC: 3 | RNVC: 2

25 May 1968

5340-21-805-5163
Dust And Moisture Seal Protective Plug

218055163
BK22678: RNCC: 3 | RNVC: 2

1 Dec 1968

5340-21-905-5363
Mounting Bracket

219055363
10518464: RNCC: 3 | RNVC: 2

10 Feb 1989

5340-21-841-7868
Clip

218417868
A10214-1: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-004-2157
Retaining Strap

200042157
C13: RNCC: 3 | RNVC: 2

23 Jul 2008

5340-21-888-7538
Swivel Caster

218887538
PPL2525BC: RNCC: 3 | RNVC: 2

14 Mar 1982

5340-21-113-7390
Handwheel

211137390
35350T: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-805-8803

5340-21-804-2830

5340-21-862-6602
Mortise Lock Set

218626602
WH2024X8254E: RNCC: 3 | RNVC: 1
6725TCX1682: RNCC: 3 | RNVC: 1
DU76601X15: RNCC: 3 | RNVC: 1
7323X70230X1719-3-4: RNCC: 3 | RNVC: 1
7323X70230X1719-3-4: RNCC: 3 | RNVC: 1
132-3642: RNCC: 6 | RNVC: 9

14 Oct 1971

5340-21-877-3734
Retaining Strap

218773734
32589: RNCC: 3 | RNVC: 2

1 Nov 1977

5340-21-855-2945

5340-20-000-5366
Loop Clamp

200005366
1567-0010-11: RNCC: 3 | RNVC: 2

10 Jan 2003

5340-21-905-5908
Mounting Bracket

219055908
CF 349 796 A: RNCC: 3 | RNVC: 2

27 Feb 1990

Load More Results