Hardware, Commercial - Canada (CA)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Canada (CA) - NCB is 20 or 21

Page 26 of 64

NSN Format for Hardware, Commercial
Codified by Canada

534021XXXXXXX
Group
FSG
ClassNCBIdentifier
FSC
Federal Supply Class
NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Canada (CA)
FSC 5340 Hardware, Commercial - Canada (CA)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340 Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?
FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?
NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?
FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?
NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340 Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 190 Items
A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 63 Items
A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 26 Items
What is a Rod End Connector? 44 Items
A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 69 Items
A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 226 Items
A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 94 Items
An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 20 Items
A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 582 Items
A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 43 Items
A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 202 Items
A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 65 Items
A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Shelf Bracket? 33 Items
A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items
A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Door Hook And Eye? 22 Items
A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 77 Items
A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 12 Items
A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 23 Items
A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 23 Items
A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 44 Items
A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 13 Items
A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is a Friction Catch? 38 Items
A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 15 Items
A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 39 Items
A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 26 Items
A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 86 Items
A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 20 Items
A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 42 Items
A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 91 Items
A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 57 Items
A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items
A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 25 Items
A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 163 Items
A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 101 Items
A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 21 Items
A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 16 Items
A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items
A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 288 Items
An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 52 Items
A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 23 Items
A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 131 Items
A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 24 Items
A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 41 Items
A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 70 Items
A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 45 Items
A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 210 Items
A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 163 Items
A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 82 Items
A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 44 Items
A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 38 Items
A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 25 Items
A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 20 Items
A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 42 Items
A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 18 Items
A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT&#59; DIAPHRAGM, VALVE, SPECIAL SHAPED&#59; DISK, VALVE, NONMETALLIC&#59; FILTERING DISK FLUID&#59; and INSULATOR, DISK.
What is a Glazier Point? 10 Items
A Glazier Point (POINT,GLAZIER) is a piece of thin sheet metal, triangular or diamond shaped, designed to hold a pane of glass in a wooden sash.
What is an Angle Bracket? 1105 Items
An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 81 Items
A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items
A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 32 Items
A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1130 Items
A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 20 Items
A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 49 Items
A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items
A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 37 Items
A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Quick Release Plunger? 13 Items
A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 114 Items
A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flush Catch? 97 Items
A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 13 Items
A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 86 Items
A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 115 Items
A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 177 Items
A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 24 Items
A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 53 Items
A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 219 Items
A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 40 Items
A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 494 Items
A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 353 Items
A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 55 Items
A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 51 Items
A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 12 Items
A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 601 Items
A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 32 Items
A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 39 Items
An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 34 Items
A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 41 Items
A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 21 Items
A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping? 19 Items
A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 93 Items
A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 117 Items
An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 31 Items
An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 45 Items
A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 19 Items
A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 832 Items
An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 35 Items
A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 40 Items
A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 75 Items
An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 106 Items
A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Picture Hanger? 10 Items
A Picture Hanger (HANGER,PICTURE) is a hook like device that is secured to walls, bulkheads, columns and the like, by means of a nail, screw, magnet or adhesive backed cloth, that is included with and/or attached to the hook. It is designed to hold and suspend variuos items such as photographs, paintings, maps, documents, etc.
What is a Protection Bellows? 16 Items
A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items
A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 57 Items
A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 49 Items
A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 2535 Items
A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 19 Items
An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items
A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 16 Items
A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 1222 Items
A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items
A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 48 Items
A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 64 Items
A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Threaded Hinged Standoff? 11 Items
A Threaded Hinged Standoff (STANDOFF,HINGED,THREADED) is a standoff, internally and/or externally, threaded on both ends with a hinge or pivot point to allow for independent movement of the ends.
What is a Spacing Threaded Standoff? 178 Items
A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 115 Items
A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a Crank Handle? 13 Items
A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 29 Items
A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Mechanic Equipment Hardware Kit? 87 Items
A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Dust And Moisture Seal Protective Cover? 38 Items
A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 51 Items
An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 308 Items
An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM&#59; SPRING (as modified)&#59; BUMPER, NONMETALLIC&#59; BUMPER, RUBBER&#59; BUSHING, NONMETALLIC&#59; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 41 Items
An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 39 Items
A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 178 Items
A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 27 Items
A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 80 Items
A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Tie Down Adapter? 11 Items
A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 34 Items
A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 86 Items
A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified)&#59; BUSHING, NONMETALLIC&#59; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Stock Items From Supply Class 5340 Page 26 of 64

200038289
3023254
RNCC: 3 | RNVC: 2
211088857
CS70A001
RNCC: 3 | RNVC: 2
1017045
RNCC: 6 | RNVC: 9
219083281
900 03 98 9210
RNCC: 3 | RNVC: 2
218642537
625A
RNCC: 3 | RNVC: 2
219084041
215-26223
RNCC: 3 | RNVC: 2
218146407
45852-506
RNCC: 3 | RNVC: 2
200061797
85350993-101
RNCC: 3 | RNVC: 2
200049576
8590492
RNCC: 3 | RNVC: 2
218881581
2415-645
RNCC: 3 | RNVC: 2
2415-645
RNCC: 3 | RNVC: 2
31971-2
RNCC: 3 | RNVC: 2
200051137
PWC32483
RNCC: 3 | RNVC: 2
218664238
1093
RNCC: 3 | RNVC: 2
218915329
N0 REF
RNCC: 3 | RNVC: 2
219083958
33893-I
RNCC: 3 | RNVC: 2
CPF-174-020
RNCC: 5 | RNVC: 9
219111471
PK1861
RNCC: 3 | RNVC: 2
219148099
1205-1028-2
RNCC: 3 | RNVC: 2
200010704
B61000-006-1
RNCC: 3 | RNVC: 2
219209407
10618338
RNCC: 3 | RNVC: 2
218840279
2689
RNCC: 3 | RNVC: 2
2689
RNCC: 5 | RNVC: 2
219015448
9630088
RNCC: 3 | RNVC: 2
218461046
45C509
RNCC: 3 | RNVC: 2
219018614
4030
RNCC: 3 | RNVC: 2
218795139
380095
RNCC: 3 | RNVC: 1
009687
RNCC: 3 | RNVC: 2
218807900
19370-616
RNCC: 3 | RNVC: 2
200081317
10713074-011PEG
RNCC: 3 | RNVC: 2
10713074
RNCC: D | RNVC: 9
200081207
10714570-011
RNCC: 3 | RNVC: 2
10714570
RNCC: D | RNVC: 9
200061357
0677870
RNCC: 3 | RNVC: 2
218576207
4378946
RNCC: 3 | RNVC: 2
219111247
391-03317-00
RNCC: 3 | RNVC: 2
MPL-03317-00
RNCC: 3 | RNVC: 2
216601154
802
RNCC: 3 | RNVC: 2
1210
RNCC: 5 | RNVC: 2
T01210
RNCC: 5 | RNVC: 2
218409598
70231
RNCC: 3 | RNVC: 2
218969949
18F92
RNCC: 3 | RNVC: 2
18F92
RNCC: 3 | RNVC: 2
200017715
10604127
RNCC: 3 | RNVC: 2
10604127
RNCC: 5 | RNVC: 2
218633507
130-2906
RNCC: 3 | RNVC: 2
219136530
710500-9
RNCC: 3 | RNVC: 2
219138905
10556199
RNCC: 3 | RNVC: 2
219138936
10607670-60
RNCC: 3 | RNVC: 2
219139906
10558158
RNCC: 3 | RNVC: 2
219141580
10505274-PW
RNCC: 3 | RNVC: 2
200017263
717877-002
RNCC: 3 | RNVC: 2
717877
RNCC: D | RNVC: 9
219136526
10608090-200
RNCC: 3 | RNVC: 2
200043279
3000492
RNCC: 3 | RNVC: 2
3000492
RNCC: 3 | RNVC: 9
219084140
CF105932A
RNCC: 3 | RNVC: 2
218978333
STRAP1IN
RNCC: 3 | RNVC: 2
219126713
WW 314 215 CR
RNCC: 3 | RNVC: 2
218937904
8784680009
RNCC: 3 | RNVC: 2
200009298
10626910-PEW
RNCC: 3 | RNVC: 2
200009405
10624965-PEG
RNCC: 3 | RNVC: 2
218904606
STRAPLIFERAFT
RNCC: 3 | RNVC: 2
219083528
9117047
RNCC: 3 | RNVC: 2
218070835
RC975
RNCC: 3 | RNVC: 2
200064086
1003442
RNCC: 3 | RNVC: 2
1003442
RNCC: 3 | RNVC: 9
216601662
0422-16000
RNCC: 3 | RNVC: 2
0422-16000
RNCC: 3 | RNVC: 2
422-16
RNCC: 3 | RNVC: 2
219083385
131 4774
RNCC: 3 | RNVC: 2
219083613
CF826042AE
RNCC: 3 | RNVC: 2
200060351
82520961-103
RNCC: 3 | RNVC: 2
218709986
18S5921-602
RNCC: 3 | RNVC: 2
218773392
31502
RNCC: 3 | RNVC: 2
200008313
10627807
RNCC: 3 | RNVC: 2
200021577
10658230-011
RNCC: 3 | RNVC: 2
10658230
RNCC: D | RNVC: 9
218828845
L0K707611A
RNCC: 3 | RNVC: 2
218984973
1005
RNCC: 3 | RNVC: 2
218865769
550
RNCC: 3 | RNVC: 2
210112824
205485
RNCC: 3 | RNVC: 2
200051136
PWC32175
RNCC: 3 | RNVC: 2
219211015
0S 82801
RNCC: 3 | RNVC: 2
0S82801
RNCC: 5 | RNVC: 2
219111080
D0297
RNCC: 3 | RNVC: 2
CPF01376
RNCC: 5 | RNVC: 2
219200535
10616724
RNCC: 3 | RNVC: 2
218904777
271179
RNCC: 3 | RNVC: 2
56700187
RNCC: 6 | RNVC: 9
219005883
8417189
RNCC: 3 | RNVC: 2
218669125
2285
RNCC: 3 | RNVC: 2
219149508
740747
RNCC: 3 | RNVC: 2
200027829
WL321069C
RNCC: 3 | RNVC: 2
WL321069
RNCC: 5 | RNVC: 1
218807805
8330-157
RNCC: 3 | RNVC: 2
219121081
9475331
RNCC: 3 | RNVC: 2
218888143
35800
RNCC: 3 | RNVC: 2
218642271
537621
RNCC: 3 | RNVC: 2
218978258
N0119142
RNCC: 3 | RNVC: 2
218743973
565B854G01
RNCC: 3 | RNVC: 2
G277
RNCC: 5 | RNVC: 2
200058846
PAAG104805
RNCC: 3 | RNVC: 2
219111047
105673
RNCC: 3 | RNVC: 2
219118921
10-11704-97
RNCC: 3 | RNVC: 2
218445461
HM4
RNCC: 3 | RNVC: 2
219080003
CF409005A
RNCC: 3 | RNVC: 2
214880110
N1350
RNCC: 3 | RNVC: 2
218498890
791-20
RNCC: 3 | RNVC: 2
5340-0490
RNCC: 6 | RNVC: 9
218984288
09-023
RNCC: 3 | RNVC: 1
218984496
18-1X25
RNCC: 3 | RNVC: 2
218551419
S2S25
RNCC: 3 | RNVC: 2
218915659
8280590
RNCC: 3 | RNVC: 2
6613D
RNCC: 3 | RNVC: 2
16908002500
RNCC: 5 | RNVC: 2
218762234
1698
RNCC: 3 | RNVC: 2
218742714
8511-01-00
RNCC: 3 | RNVC: 2
218094136
XX51362
RNCC: 3 | RNVC: 2
219055459
12A00466G01
RNCC: 3 | RNVC: 2
200017545
A4610066
RNCC: 3 | RNVC: 2
200010222
10658311-001
RNCC: 3 | RNVC: 2
219141603
S1315-10A
RNCC: 3 | RNVC: 2
219142194
565-0096-01
RNCC: 3 | RNVC: 2
218840719
NO1
RNCC: 3 | RNVC: 2
218688298
1078CM
RNCC: 3 | RNVC: 1
1078C26-5
RNCC: 3 | RNVC: 2
69GP6
RNCC: 4 | RNVC: 1
218553404
152B5024P21
RNCC: 3 | RNVC: 2
218709774
72SF10601S
RNCC: 3 | RNVC: 1
72SF10601
RNCC: 3 | RNVC: 1
72SF10601SWB
RNCC: 3 | RNVC: 2
218795451
FG691B
RNCC: 3 | RNVC: 2
218762105
1020-36436
RNCC: 3 | RNVC: 2
200060745
82550626-101
RNCC: 3 | RNVC: 2
219215123
725376
RNCC: 3 | RNVC: 2
218105737
30-34039
RNCC: 3 | RNVC: 2
219149507
259742-901
RNCC: 3 | RNVC: 2
200080069
CI-1216
RNCC: 3 | RNVC: 2
218962199
45-177
RNCC: 3 | RNVC: 2
200072964
TE30021145-001
RNCC: 3 | RNVC: 2
219200594
10618464
RNCC: 3 | RNVC: 2
218626226
4ARM
RNCC: 3 | RNVC: 2
219083571
CF346597A
RNCC: 3 | RNVC: 2
200073927
10703164-011
RNCC: 3 | RNVC: 2
10703164
RNCC: D | RNVC: 9
218688987
2369-75-1050
RNCC: 3 | RNVC: 2
219055154
575MN
RNCC: 3 | RNVC: 2
575-MN
RNCC: 3 | RNVC: 2
219084416
2351083
RNCC: 3 | RNVC: 2
219080563
40B1215
RNCC: 3 | RNVC: 2
01154485
RNCC: 3 | RNVC: 2
218795253
4033
RNCC: 3 | RNVC: 1
SM00THIE
RNCC: 5 | RNVC: 1
218828262
S54N
RNCC: 3 | RNVC: 2
219083582
10553294
RNCC: 3 | RNVC: 2
218761857
GS11-120-10
RNCC: 3 | RNVC: 2
219019014
10075-0248
RNCC: 3 | RNVC: 2
219217885
15735
RNCC: 3 | RNVC: 2
200050764
4003500
RNCC: 3 | RNVC: 2
23470
RNCC: 3 | RNVC: 9
218748481
8418
RNCC: 3 | RNVC: 2
218625763
TUTCHLATCH
RNCC: 3 | RNVC: 2
218141808
204942-41
RNCC: 3 | RNVC: 2
211091505
2Z2642-433
RNCC: 3 | RNVC: 2
A12087
RNCC: 3 | RNVC: 2
1017508
RNCC: 6 | RNVC: 9
200081209
10693986-011
RNCC: 3 | RNVC: 2
10693986
RNCC: D | RNVC: 9
216601811
701EAWJU
RNCC: 3 | RNVC: 2
200056026
AC40317-15-02
RNCC: 3 | RNVC: 2
218591257
3814R
RNCC: 3 | RNVC: 2
3814R
RNCC: 3 | RNVC: 2
218915379
LCN4015LH
RNCC: 3 | RNVC: 2
200050065
315-634
RNCC: 3 | RNVC: 2
219205750
10608678
RNCC: 3 | RNVC: 2
218625424
FML3869X
RNCC: 3 | RNVC: 2
219119561
WL321586A
RNCC: 3 | RNVC: 2
219130038
10373-2
RNCC: 3 | RNVC: 2
200065733
10676365-011PEW
RNCC: 3 | RNVC: 2
200061411
82510049-103
RNCC: 3 | RNVC: 2
219123236
8827869
RNCC: 3 | RNVC: 2
218881196
190383
RNCC: 3 | RNVC: 2
200038976
10663378-011PG
RNCC: 3 | RNVC: 2
218904947
T1163
RNCC: 3 | RNVC: 2
200073902
10707895-011PEW
RNCC: 3 | RNVC: 2
10707895
RNCC: D | RNVC: 9
200081191
10683151-011PG
RNCC: 3 | RNVC: 2
10683151
RNCC: D | RNVC: 9
200054244
SK-908-104
RNCC: 3 | RNVC: 2
200017550
TE20010166-101
RNCC: 3 | RNVC: 2
TE20010166
RNCC: D | RNVC: 9
219130014
1107-50
RNCC: 3 | RNVC: 2
200001218
8404
RNCC: 3 | RNVC: 2
200015275
DE-4454
RNCC: 3 | RNVC: 2
219084095
B183801408
RNCC: 3 | RNVC: 2
219055460
AP606388
RNCC: 3 | RNVC: 2
218969710
4382436011
RNCC: 3 | RNVC: 2
219208850
10627746-PG
RNCC: 3 | RNVC: 2
200060990
82510078-105
RNCC: 3 | RNVC: 2
200041383
L792C4002101
RNCC: 3 | RNVC: 2
200008512
D-2053
RNCC: 3 | RNVC: 2
200050101
IGDS2606-1
RNCC: 3 | RNVC: 2
IGDS2606
RNCC: 5 | RNVC: 1
200010207
10657250-011
RNCC: 3 | RNVC: 2
219080125
8611769
RNCC: 3 | RNVC: 2
219125887
32-35
RNCC: 3 | RNVC: 2
079-207
RNCC: 3 | RNVC: 2
218483107
20397
RNCC: 3 | RNVC: 2
219125785
8729283-2
RNCC: 3 | RNVC: 2
219119692
8792 010-573
RNCC: 3 | RNVC: 2
218950519
4381438780
RNCC: 3 | RNVC: 2
200017445
10640289-PW
RNCC: 3 | RNVC: 2
219090945
PK1857
RNCC: 3 | RNVC: 2
216600669
03277
RNCC: 3 | RNVC: 2
03277
RNCC: 3 | RNVC: 2
130-4604
RNCC: 6 | RNVC: 9
218840850
110-4SBL
RNCC: 3 | RNVC: 2
200079205
10688858-011PEW
RNCC: 3 | RNVC: 2
10688858
RNCC: D | RNVC: 9
200076767
10703954-011PW
RNCC: 3 | RNVC: 2
10703954
RNCC: D | RNVC: 9
219138795
215-93962
RNCC: 3 | RNVC: 2
218840940
1262A01840
RNCC: 3 | RNVC: 2
200075825
10655892-001
RNCC: 3 | RNVC: 2
10655892
RNCC: D | RNVC: 9
200065734
10676369-001
RNCC: 3 | RNVC: 2
219125819
TE10002525-001
RNCC: 3 | RNVC: 2
TE10002525-002
RNCC: 3 | RNVC: 2
200081211
10687704-001
RNCC: 3 | RNVC: 2
10687704
RNCC: D | RNVC: 9
219019006
BS2552-61-00-003
RNCC: 3 | RNVC: 2
218887653
4161
RNCC: 3 | RNVC: 2
4161
RNCC: 3 | RNVC: 2
218130932
QL06TD
RNCC: 3 | RNVC: 2
218408933
11
RNCC: 3 | RNVC: 2
305-9041
RNCC: 6 | RNVC: 9
219141556
258541-501
RNCC: 3 | RNVC: 2
219134844
2184
RNCC: 3 | RNVC: 2
219080317
10 322 936
RNCC: 3 | RNVC: 2
N5-44-4X40-6
RNCC: 3 | RNVC: 2
218762131
08761203
RNCC: 3 | RNVC: 2
210004716
205656
RNCC: 3 | RNVC: 2
J600079ITEM152
RNCC: 5 | RNVC: 2
200015364
0358573
RNCC: 3 | RNVC: 2
219138859
9278028-1
RNCC: 3 | RNVC: 2
219084285
215-33159-1
RNCC: 3 | RNVC: 2
218590005
F14-5
RNCC: 3 | RNVC: 2
218984888
8481974
RNCC: 3 | RNVC: 2
B183801619
RNCC: 5 | RNVC: 2
218773387
31577
RNCC: 3 | RNVC: 2
219080373
06361128
RNCC: 3 | RNVC: 2
200004547
PK569
RNCC: 3 | RNVC: 2
216600874
1100
RNCC: 3 | RNVC: 2
200059378
TE10017636-001
RNCC: 3 | RNVC: 2
200053389
82710141-101
RNCC: 3 | RNVC: 2
200030772
C30603-100-1
RNCC: 3 | RNVC: 2
218468432
CR50
RNCC: 3 | RNVC: 2
6B
RNCC: 3 | RNVC: 2
22010/50
RNCC: 3 | RNVC: 2
C1SA50MM
RNCC: 3 | RNVC: 2
218642435
FC6
RNCC: 3 | RNVC: 1
FC6
RNCC: 3 | RNVC: 1
FC6
RNCC: 3 | RNVC: 2
218538317
89C41825-11
RNCC: 3 | RNVC: 2
219123271
TE30002550
RNCC: 3 | RNVC: 2
200043778
10672200-001PG
RNCC: 3 | RNVC: 2
200079547
10696405-001PEG
RNCC: 3 | RNVC: 2
10696405
RNCC: D | RNVC: 9
218916171
OP-101GALH
RNCC: 3 | RNVC: 2
218482821
41A35071-30
RNCC: 3 | RNVC: 2
200077674
10690202-001
RNCC: 3 | RNVC: 2
10690202
RNCC: D | RNVC: 9
219210880
0S82810
RNCC: 3 | RNVC: 2
219213011
097-825
RNCC: 3 | RNVC: 2
219080531
10502304
RNCC: 3 | RNVC: 2
216602019
C749
RNCC: 3 | RNVC: 2
218689223
1254-31
RNCC: 3 | RNVC: 2
218915878
BB750 5X4.500
RNCC: 3 | RNVC: 2
BB750
RNCC: 5 | RNVC: 2
218916391
4382657140
RNCC: 3 | RNVC: 2
219205926
6227742
RNCC: 3 | RNVC: 2
200030937
M122348
RNCC: 3 | RNVC: 2
216290952
ALS20-1AND2
RNCC: 3 | RNVC: 2
ARL20-1AND2
RNCC: 3 | RNVC: 2
AP2144
RNCC: 3 | RNVC: 2
AP0413-951-8035
RNCC: 3 | RNVC: 2
ARL20-1AND2
RNCC: 5 | RNVC: 2
887-15
RNCC: 5 | RNVC: 9
CDAMENVSH1-0-8PART5PN8B7-15
RNCC: 5 | RNVC: 9
219141618
022-2478-11
RNCC: 3 | RNVC: 2
218578607
1252
RNCC: 3 | RNVC: 2
200041340
6LE84751100
RNCC: 3 | RNVC: 2
218828570
AP443965
RNCC: 3 | RNVC: 2
219130837
NSV 350 24
RNCC: 3 | RNVC: 2
218664181
1427L
RNCC: 3 | RNVC: 2
200041715
AID-64-179
RNCC: 3 | RNVC: 2
218961838
2197 2231-234
RNCC: 3 | RNVC: 2
21972231-234
RNCC: 3 | RNVC: 2
219080996
1200900
RNCC: 3 | RNVC: 2
16100920002
RNCC: 5 | RNVC: 2
219080608
161.29.42.0025
RNCC: 3 | RNVC: 2
200056274
086-607
RNCC: 3 | RNVC: 2
200029911
16139
RNCC: 3 | RNVC: 2
200072370
7667
RNCC: 3 | RNVC: 2
219134286
10626005
RNCC: 3 | RNVC: 2
218709977
18S5850P10L
RNCC: 3 | RNVC: 2
218468477
559997-131
RNCC: 3 | RNVC: 2
219084031
215-60016-824
RNCC: 3 | RNVC: 2
218984671
BPC5
RNCC: 3 | RNVC: 2
BPC5
RNCC: 5 | RNVC: 2
219053529
2-100975
RNCC: 3 | RNVC: 2
219108567
TE10004293-001
RNCC: 3 | RNVC: 2
219111308
2410-32
RNCC: 3 | RNVC: 2
218473279
102609
RNCC: 3 | RNVC: 2
219018873
WW434233B
RNCC: 3 | RNVC: 2
WW434233A
RNCC: 5 | RNVC: 2
200031841
541309
RNCC: 3 | RNVC: 2
200076063
10707575-011PEW
RNCC: 3 | RNVC: 2
10707575
RNCC: D | RNVC: 9
218962803
027533509
RNCC: 3 | RNVC: 2
200021600
10617824
RNCC: 3 | RNVC: 2
200032117
B30601-240-1
RNCC: 3 | RNVC: 2
200078895
10705583-011PW
RNCC: 3 | RNVC: 2
10705583
RNCC: D | RNVC: 9
219084830
DA-05053-06
RNCC: 3 | RNVC: 2
213305048
549588
RNCC: 3 | RNVC: 2
219018830
1427AK
RNCC: 3 | RNVC: 2
219084607
84008
RNCC: 3 | RNVC: 2
218916182
PLATE2.670X0.515X0.250IN
RNCC: 3 | RNVC: 2
218828795
AP664801A
RNCC: 3 | RNVC: 2
200014751
10625450
RNCC: 3 | RNVC: 2
218689845
6MK
RNCC: 3 | RNVC: 2
5340-5383
RNCC: 6 | RNVC: 9
219136503
022-2117-01
RNCC: 3 | RNVC: 2
200071276
ST2231-10
RNCC: 3 | RNVC: 2
200019601
30219
RNCC: 3 | RNVC: 2