What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

Hardware, Commercial - Canada (CA)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Canada (CA) - NCB is 20 or 21

Page 25 of 64

NSN Format for Hardware, Commercial
Codified by Canada

53	40	21	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Canada (CA)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 190 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 63 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 26 Items
What is a Rod End Connector? 44 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 69 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 226 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 94 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 20 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 582 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 43 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 202 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 65 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Shelf Bracket? 33 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Door Hook And Eye? 22 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 77 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 12 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 23 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 23 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 44 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 13 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is a Friction Catch? 38 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 15 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 39 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 26 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 86 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 20 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 42 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 91 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 57 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 25 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 163 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 101 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 21 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 16 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 288 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 52 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 23 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 131 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 24 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 41 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 70 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 45 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 210 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 163 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 82 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 44 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 38 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 25 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 20 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 42 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 18 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Glazier Point? 10 Items: A Glazier Point (POINT,GLAZIER) is a piece of thin sheet metal, triangular or diamond shaped, designed to hold a pane of glass in a wooden sash.
What is an Angle Bracket? 1105 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 81 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 32 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1130 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 20 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 49 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 37 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Quick Release Plunger? 13 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 114 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flush Catch? 97 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 13 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 86 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 115 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 177 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 24 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 53 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 219 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 40 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 494 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 353 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 55 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 51 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 12 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 601 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 32 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 39 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 34 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 41 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 21 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping? 19 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 93 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 117 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 31 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 45 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 19 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 832 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 35 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 40 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 75 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 106 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Picture Hanger? 10 Items: A Picture Hanger (HANGER,PICTURE) is a hook like device that is secured to walls, bulkheads, columns and the like, by means of a nail, screw, magnet or adhesive backed cloth, that is included with and/or attached to the hook. It is designed to hold and suspend variuos items such as photographs, paintings, maps, documents, etc.
What is a Protection Bellows? 16 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 57 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 49 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 2535 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 19 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 16 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 1222 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 48 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 64 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Threaded Hinged Standoff? 11 Items: A Threaded Hinged Standoff (STANDOFF,HINGED,THREADED) is a standoff, internally and/or externally, threaded on both ends with a hinge or pivot point to allow for independent movement of the ends.
What is a Spacing Threaded Standoff? 178 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 115 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a Crank Handle? 13 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 29 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Mechanic Equipment Hardware Kit? 87 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Dust And Moisture Seal Protective Cover? 38 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 51 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 308 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 41 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 39 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 178 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 27 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 80 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 86 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 25 of 64

5340-21-855-1439
Resilient Mount

218551439
S1S25: RNCC: 3 | RNVC: 2

23 Jul 1969

5340-21-840-9086
Door Holder

218409086
330A: RNCC: 3 | RNVC: 2
1000: RNCC: 5 | RNVC: 2

6 Jun 1968

5340-21-897-8643
Butt Hinge Leaf

218978643
7979807: RNCC: 3 | RNVC: 2
8477913: RNCC: 5 | RNVC: 2

14 Feb 1985

5340-21-896-9964
Adjusting Screw

218969964
67A40: RNCC: 3 | RNVC: 2

19 Nov 1984

5340-21-879-6402
Engine Accessory Bracket

218796402
M1031100: RNCC: 3 | RNVC: 2

12 Sep 1978

5340-21-913-0756
Dust And Moisture Seal Protective Plug

219130756
704335-001: RNCC: 3 | RNVC: 2

21 Mar 1996

5340-21-888-7636
Swivel Caster

218887636
511NYB: RNCC: 3 | RNVC: 2

27 Mar 1982

5340-21-812-7524
Clamp Bolt Assembly

218127524
AA119830-1: RNCC: 3 | RNVC: 2
A119830-1: RNCC: 5 | RNVC: 2

20 Mar 1964

5340-21-912-9968
Electronic Equipment Hardware Kit

219129968
9590011-1: RNCC: 3 | RNVC: 2

30 Jan 1996

5340-21-884-0278
Recess Handle

218840278
901XC: RNCC: 3 | RNVC: 2
13082: RNCC: 5 | RNVC: 2

24 Dec 1980

5340-21-884-0962
Door Closer

218840962
SK120CONQUEROR: RNCC: 3 | RNVC: 2
CONQUERORSK120: RNCC: 5 | RNVC: 2

2 Jun 1981

5340-21-893-8014
Door Holder

218938014
F41AX: RNCC: 3 | RNVC: 2

27 Aug 1983

5340-21-870-9979
Wrapper She Bracket

218709979
18S5850P5R: RNCC: 3 | RNVC: 2

24 Nov 1976

5340-21-898-4839
Key

218984839
ESG-9-300: RNCC: 3 | RNVC: 2

11 Sep 1985

5340-21-920-3819
Mounting Bracket

219203819
9780834-1: RNCC: 3 | RNVC: 2
9780834: RNCC: 5 | RNVC: 2

28 Oct 1999

5340-21-914-8616
Double Angle Bracket

219148616
1347-243-3: RNCC: 3 | RNVC: 2

30 Jul 1998

5340-20-005-7466
Mounting Bracket

200057466
0677910-2: RNCC: 3 | RNVC: 2

26 Jul 2010

5340-21-914-1560
Rod End Connector

219141560
150-309: RNCC: 3 | RNVC: 2

7 May 1997

5340-21-896-9876
Spindle Packing Set

218969876
17P-28: RNCC: 3 | RNVC: 2

4 Nov 1984

5340-21-311-8693

5340-21-330-0043

5340-21-908-0417
Access Cover

219080417
10553070: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-21-908-5397
Double Angle Bracket

219085397
FK173801: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-21-878-0227
Plug Button

218780227
KP75: RNCC: 3 | RNVC: 2

12 Jan 1978

5340-20-000-3977
Angle Bracket

200003977
10655743-001: RNCC: 3 | RNVC: 2

13 Sep 2002

5340-21-866-4344
Pipe Bracket

218664344
CT-65-1.500: RNCC: 3 | RNVC: 2
24M-1.500: RNCC: 3 | RNVC: 2

19 May 1972

5340-21-908-4129
Multiple Angle Bracket

219084129
702-139205-912-0: RNCC: 3 | RNVC: 2

17 Jun 1992

5340-21-809-4150
Threaded Rod End

218094150
41A90663: RNCC: 3 | RNVC: 2

30 Aug 1963

5340-21-905-5896
Holder

219055896
CF819366A: RNCC: 3 | RNVC: 2

23 Feb 1990

5340-21-920-8867
Angle Bracket

219208867
10604123: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-20-006-7372
Handle Grip

200067372
10699250: RNCC: 3 | RNVC: 2

14 Feb 2012

5340-21-805-8774

5340-21-866-9470
Rod End Clevis

218669470
813954: RNCC: 3 | RNVC: 2

14 Jul 1972

5340-21-920-8069
Pipe. Clamp Half

219208069
5334-HPP: RNCC: 3 | RNVC: 2

22 Sep 2000

5340-21-860-6548
Mortise Lock Set

218606548
400BC10KWIKSET: RNCC: 3 | RNVC: 2

17 Dec 1970

5340-21-908-0189
Retaining Strap

219080189
H3513 132 5778: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-20-001-8258
Mounting Bracket

200018258
B51007-009-1: RNCC: 3 | RNVC: 2
B51007-009: RNCC: D | RNVC: 9

13 Jan 2005

5340-21-847-0565
Sliding Door Glide

218470565
R26-60: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-891-6899
Lock Assembly

218916899
SAM10-22R: RNCC: 3 | RNVC: 2
SAM-10-22R: RNCC: 3 | RNVC: 2

25 Jun 1983

5340-20-008-1807
Mounting Plate

200081807
10696408-001PEG: RNCC: 3 | RNVC: 2
10696408: RNCC: D | RNVC: 9

18 Dec 2013

5340-21-901-8327
Bow Handle

219018327
11705-SS-2528: RNCC: 3 | RNVC: 2
G169585: RNCC: 5 | RNVC: 2

1 Nov 1986

5340-21-798-7571
Corrosion Preventive Anode

217987571
4420LE73559: RNCC: 3 | RNVC: 2
4420LE73559P: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-921-4132
Mounting Bracket

219214132
10642749-PG: RNCC: 3 | RNVC: 2

2 Nov 2001

5340-21-866-9104
Tee Hinge

218669104
906: RNCC: 3 | RNVC: 2

16 Jun 1972

5340-21-877-3790
Retaining Strap

218773790
23565: RNCC: 3 | RNVC: 2

22 Nov 1977

5340-20-000-2540
Mounting Bracket

200002540
664-800253-000: RNCC: 3 | RNVC: 2

28 Jun 2002

5340-20-004-6328
Friction Catch

200046328
BB012: RNCC: 3 | RNVC: 2

3 Mar 2009

5340-21-891-6276
Headless Straight Rod

218916276
MS20253-2-9830: RNCC: 2 | RNVC: 2
MS20253-2-9830: RNCC: 3 | RNVC: 2

21 Mar 1983

5340-20-001-5020
Cylinder Asse Clamp

200015020
9775357-1: RNCC: 3 | RNVC: 2
9775357: RNCC: D | RNVC: 9

24 Jun 2004

5340-21-913-1441
Retainer Wire

219131441
10618772: RNCC: 3 | RNVC: 2

5 Jul 1996

5340-21-912-6673
Lashing Strap

219126673
WW 314 321 BU: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-21-868-8781
Barrel Bolt

218688781
SC1078C4: RNCC: 3 | RNVC: 1

18 Oct 1973

5340-21-848-2950
Expansion Shield

218482950
6855-00300: RNCC: 3 | RNVC: 2
6855-3: RNCC: 3 | RNVC: 2
6855-00300: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-879-6058
Rod End Clevis

218796058
90414-01-6-329: RNCC: 3 | RNVC: 2

22 May 1979

5340-21-112-3673
Detent Plunger

211123673
373777 REV E: RNCC: 3 | RNVC: 2
373777: RNCC: 3 | RNVC: 2
C55-11-01-100: RNCC: 5 | RNVC: 9

6 Jun 1968

5340-21-908-4296
Retaining Strap

219084296
TE10002400-002: RNCC: 3 | RNVC: 2

17 Apr 1992

5340-21-908-3614
Mounting Plate

219083614
CF826064A: RNCC: 3 | RNVC: 2

18 Dec 1991

5340-21-912-5931
Retaining Strap

219125931
WW 314 097 A: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-21-882-8109
Clamping Catch

218828109
4842413513: RNCC: 3 | RNVC: 2

14 May 1980

5340-21-908-4965
Synchro Clamp

219084965
905245: RNCC: 3 | RNVC: 2
409074: RNCC: 5 | RNVC: 2
309074: RNCC: 5 | RNVC: 2

8 Jan 1993

5340-21-877-3463
Mortise Lock Set

218773463
D51PDX32D: RNCC: 3 | RNVC: 2

18 Oct 1977

5340-20-003-1930
Cover Retainer

200031930
C30603-210-1: RNCC: 3 | RNVC: 2
C30603-210: RNCC: 5 | RNVC: 1

7 Feb 2007

5340-21-846-1541
Key Blank

218461541
92: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-006-6933
Double Angle Bracket

200066933
B30603-068-2: RNCC: 3 | RNVC: 2

25 Jan 2012

5340-20-002-2456
Webbing Strap

200022456
9279744-2: RNCC: 3 | RNVC: 2
9279744: RNCC: D | RNVC: 9

8 Sep 2005

5340-20-007-0707
Mounting Plate

200070707
MM-7225-0-D/2: RNCC: 3 | RNVC: 2

13 Aug 2012

5340-21-803-9040

5340-21-890-4251
Clamping Catch

218904251
01865: RNCC: 3 | RNVC: 2

28 Aug 1982

5340-20-004-0874
Bracket Protection

200040874
0775888-1: RNCC: 3 | RNVC: 2

7 May 2008

5340-21-660-2356
Key Blank

216602356
4197 1-4AC: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-003-5768
Mounting Bracket

200035768
0577600-1: RNCC: 3 | RNVC: 2

18 Sep 2007

5340-21-109-0591
Butt Hinge

211090591
YA5151: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-908-4042
Pad Eye

219084042
215-26223-1: RNCC: 3 | RNVC: 2

27 May 1992

5340-21-797-1414

5340-20-001-2249
Webbing Strap

200012249
45-7034: RNCC: 3 | RNVC: 2

21 Jan 2004

5340-21-816-8868

5340-21-004-8835

5340-20-000-9283
Mounting Bracket

200009283
10625560-PEW: RNCC: 3 | RNVC: 2

6 Aug 2003

5340-21-847-5116
Mirror Holder

218475116
BP554: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-862-6120
Expansion Shield

218626120
3435-00100: RNCC: 3 | RNVC: 2
3435-1: RNCC: 3 | RNVC: 2
5340-5823: RNCC: 6 | RNVC: 9

15 Jul 1971

5340-21-874-3898
Hanger Strap

218743898
SR-2-4: RNCC: 3 | RNVC: 2
122-532: RNCC: 3 | RNVC: 2
SHR-250: RNCC: 3 | RNVC: 2
SHR250: RNCC: 3 | RNVC: 2

19 Apr 1977

5340-21-860-5800
Turnbuckle Body

218605800
FHS1429-1: RNCC: 3 | RNVC: 2
280E31-00256-01: RNCC: 5 | RNVC: 2

15 Oct 1970

5340-20-002-7976
Mounting Bracket

200027976
10625309: RNCC: 3 | RNVC: 2

20 Jun 2006

5340-21-901-8971
Swivel Caster

219018971
TSH200PTR5: RNCC: 3 | RNVC: 2

31 Mar 1988

5340-20-000-5785
Cargo Webbing Assem

200005785
B81002-175-1: RNCC: 3 | RNVC: 2
B81002-175: RNCC: D | RNVC: 9

19 Feb 2003

5340-20-000-2530
M Support Assembly

200002530
664-800246-000: RNCC: 3 | RNVC: 2

27 Jun 2002

5340-20-007-6082
General Purpose Resilient Mount

200076082
10675903-001: RNCC: 3 | RNVC: 2
10675903: RNCC: D | RNVC: 9

25 Apr 2013

5340-20-007-3770
Blank Panel

200073770
10707662-011: RNCC: 3 | RNVC: 2
10707662: RNCC: D | RNVC: 9

9 Jan 2013

5340-21-897-8559
Cylinder Cam

218978559
B502-191: RNCC: 3 | RNVC: 2

4 Feb 1985

5340-20-004-9834
Protective Cage Ass

200049834
617-815121-VAR: RNCC: 3 | RNVC: 2

28 Jul 2009

5340-21-914-1606
Mounting Plate

219141606
86116-5: RNCC: 3 | RNVC: 2

14 Jun 1997

5340-21-805-4835
Buckle

218054835
ID54-115: RNCC: 3 | RNVC: 2

5 Sep 1963

5340-21-884-0205
Screw Thread Insert

218840205
MS51836-301: RNCC: 2 | RNVC: 2

3 Dec 1980

5340-21-908-0809
Bow Handle

219080809
4024-2: RNCC: 3 | RNVC: 2
PS177425-02: RNCC: 5 | RNVC: 2

29 May 1991

5340-21-101-6192
Padlock

211016192
95: RNCC: 3 | RNVC: 2
P95: RNCC: 3 | RNVC: 2
180-580: RNCC: 3 | RNVC: 2
1016192: RNCC: 6 | RNVC: 9
ZCC180-580: RNCC: 6 | RNVC: 9

4 Jun 1968

5340-20-004-5992
General Purpose Resilient Mount

200045992
300429-501: RNCC: 3 | RNVC: 2
300429: RNCC: 5 | RNVC: 1

23 Feb 2009

5340-20-004-4821
Mounting Plate

200044821
0477301-1: RNCC: 3 | RNVC: 2
0477301: RNCC: 5 | RNVC: 1

12 Jan 2009

5340-20-003-9419
Mounting Bracket

200039419
10628289-PW: RNCC: 3 | RNVC: 2

10 Mar 2008

5340-21-108-9845
Padlock

211089845
CQ1259: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-813-6712
Butt Hinge Leaf

218136712
A02S4011-27: RNCC: 3 | RNVC: 2

3 Jun 1964

5340-20-008-1342
Mounting Bracket

200081342
10706257-011PEW: RNCC: 3 | RNVC: 2
10706257: RNCC: D | RNVC: 9

25 Nov 2013

5340-21-866-9937
Expansion Shield

218669937
3410: RNCC: 3 | RNVC: 2
WEJIT: RNCC: 5 | RNVC: 1

20 Oct 1972

5340-20-003-9951
Drive Chain

200039951
35RB: RNCC: 3 | RNVC: 2

31 Mar 2008

5340-21-870-9520
Webbing Strap

218709520
7255: RNCC: 3 | RNVC: 2

3 Mar 1976

5340-21-920-0537
Angle Bracket

219200537
10616882: RNCC: 3 | RNVC: 2

26 Mar 1999

5340-20-003-0481
Door Handle Unit

200030481
099-152: RNCC: 3 | RNVC: 2

24 Nov 2006

5340-21-877-3266
Loop Clamp

218773266
32603: RNCC: 3 | RNVC: 2

18 Oct 1977

5340-20-005-0957
Transfer Cover Assy

200050957
10617181: RNCC: 3 | RNVC: 2

7 Oct 2009

5340-20-007-5803
Mounting Plate

200075803
10627386: RNCC: 3 | RNVC: 2

15 Apr 2013

5340-21-901-8756
Electrical-Mechanical Equipment Post

219018756
155-308: RNCC: 3 | RNVC: 2

2 Nov 1987

5340-21-868-8058
Door Closer

218688058
18-26-26BC28: RNCC: 3 | RNVC: 1

17 Nov 1972

5340-21-848-2410

5340-21-660-1858
Turnbuckle

216601858
301: RNCC: 3 | RNVC: 1
301X5/8-6: RNCC: 3 | RNVC: 2
185-6920: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-895-0421
Electrical-Mechanical Equipment Post

218950421
N1411-632-6: RNCC: 3 | RNVC: 2
947177-106C: RNCC: 5 | RNVC: 2

4 Feb 1984

5340-21-660-0322
Tee Hinge

216600322
904RBP: RNCC: 3 | RNVC: 1
904C2HBP-5: RNCC: 3 | RNVC: 2
904RBP-5: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-007-6055
Mounting Bracket

200076055
10703826-011PEW: RNCC: 3 | RNVC: 2
10703826: RNCC: D | RNVC: 9

24 Apr 2013

5340-20-007-3788
Mounting Bracket

200073788
10706689-011PW: RNCC: 3 | RNVC: 2
10706689: RNCC: D | RNVC: 9

10 Jan 2013

5340-20-007-6046
Mounting Plate

200076046
10705832-011PEW: RNCC: 3 | RNVC: 2
10705832: RNCC: D | RNVC: 9

24 Apr 2013

5340-21-905-5191
Insert

219055191
2355343: RNCC: 3 | RNVC: 2

8 Oct 1988

5340-21-820-1455
General Purpose Resilient Mount

218201455
10-100: RNCC: 3 | RNVC: 2

28 Jul 1965

5340-20-003-8662
General Purpose Access Door

200038662
050-92106: RNCC: 3 | RNVC: 2

25 Jan 2008

5340-21-798-7567
Corrosion Preventive Anode

217987567
4420LE73557: RNCC: 3 | RNVC: 2
4420LE73557P: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-106-6898

5340-21-801-2625

5340-21-908-3452
Bar

219083452
134-9472: RNCC: 3 | RNVC: 2

2 Nov 1991

5340-21-884-0260
Door Hook And Eye

218840260
961: RNCC: 3 | RNVC: 2

24 Dec 1980

5340-21-915-0155
Nonmetallic Bumper

219150155
10618379: RNCC: 3 | RNVC: 2

25 May 1999

5340-21-629-0014

5340-21-629-0203

5340-21-660-0114
Butt Hinge

216600114
02161: RNCC: 3 | RNVC: 1

6 Jun 1968

5340-21-712-7084
Rigid Caster

217127084
72SF10627RBHC: RNCC: 3 | RNVC: 2

25 May 1968

5340-21-908-3606
Ventilating Cover

219083606
CF814512AE: RNCC: 3 | RNVC: 2

8 Jan 1992

5340-21-862-6224
Key Blank

218626224
H64S: RNCC: 3 | RNVC: 2

16 Sep 1971

5340-21-660-1231
Corner Brace

216601231
999: RNCC: 3 | RNVC: 1
999-3X5/8: RNCC: 3 | RNVC: 2
130-3667: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-921-5107
Anchor Plate

219215107
725289: RNCC: 3 | RNVC: 2

18 Dec 2001

5340-21-848-3465

5340-21-840-9074

5340-21-660-1676

5340-21-908-0995
Handle Grip

219080995
707901: RNCC: 3 | RNVC: 2

31 Aug 1991

5340-20-001-4254
Mounting Plate

200014254
04-M113-2-2000: RNCC: 3 | RNVC: 2

12 May 2004

5340-21-877-3255
Flush Bolt

218773255
2856C26D: RNCC: 3 | RNVC: 2

18 Oct 1977

5340-21-877-3368
Door Holder

218773368
F20X: RNCC: 3 | RNVC: 2

18 Oct 1977

5340-21-911-7926
Seal Retaining Plate

219117926
3019924: RNCC: 3 | RNVC: 2

8 Feb 1994

5340-20-004-3289
Bumper

200043289
3000583: RNCC: 3 | RNVC: 2
3000583: RNCC: 3 | RNVC: 9

2 Oct 2008

5340-21-855-1407
Resilient Mount

218551407
S4S200: RNCC: 3 | RNVC: 2

23 Jul 1969

5340-20-005-1973
Retaining Band

200051973
R0070366: RNCC: 3 | RNVC: 2

4 Dec 2009

5340-21-880-7293
Manual Control Lever

218807293
7097-11: RNCC: 3 | RNVC: 2

28 Aug 1979

5340-21-863-3497
Angle Bracket

218633497
130-3728: RNCC: 3 | RNVC: 2

18 Nov 1971

5340-20-005-3632
General Purpose Resilient Mount

200053632
A20618-286-1: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-20-000-0269
Mounting Bracket

200000269
10651601-001PW: RNCC: 3 | RNVC: 2

12 Apr 2002

5340-21-905-5881
Nonmetallic Bumper

219055881
TE30002723-001: RNCC: 3 | RNVC: 2

21 Feb 1990

5340-21-920-6847
Turret Sta Base Pad

219206847
10603949: RNCC: 3 | RNVC: 2

12 Jun 2000

5340-21-914-2766
Spring Holder

219142766
WW402076: RNCC: 3 | RNVC: 2

18 Jul 1997

5340-21-814-1372

5340-21-905-5509
Swivel Caster

219055509
10699X691: RNCC: 3 | RNVC: 2

3 May 1989

5340-20-004-0216
Mechanical Stop

200040216
GM3-M1114A: RNCC: 3 | RNVC: 2
042-253322: RNCC: D | RNVC: 9

8 Apr 2008

5340-21-908-0616
Electronic Equipment Hardware Kit

219080616
214242: RNCC: 3 | RNVC: 2

20 Mar 1991

5340-21-846-1557
Key Blank

218461557
36A: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-897-7903
Threaded Rod End

218977903
8490441: RNCC: 3 | RNVC: 2

3 Jan 1985

5340-20-007-7827
Catch Strike

200077827
HW-LS5653: RNCC: 3 | RNVC: 2

19 Jul 2013

5340-21-905-5570
Manual Control Handle

219055570
10553632: RNCC: 3 | RNVC: 2

1 Jun 1989

5340-21-816-2914
Latch Assembly

218162914
HS616A3: RNCC: 3 | RNVC: 2

28 Aug 1964

5340-21-898-4110
Spring Tension Clip

218984110
4537994-802: RNCC: 3 | RNVC: 2

15 Mar 1985

5340-21-868-8990
Swivel Caster

218688990
5-4209-439: RNCC: 3 | RNVC: 2

23 Apr 1974

5340-20-005-1159
Plate Travel Lock A

200051159
TE10010657: RNCC: 3 | RNVC: 2

20 Oct 2009

5340-20-006-4867
Mounting Plate

200064867
0775954: RNCC: 3 | RNVC: 2

1 Sep 2011

5340-21-911-8233
Nonmetallic Bumper

219118233
SJ-5018 021200 673849: RNCC: 3 | RNVC: 2

10 Mar 1994

5340-20-007-9556
Headless Grooved Rod

200079556
10698207-001: RNCC: 3 | RNVC: 2
10698207: RNCC: D | RNVC: 9

27 Sep 2013

5340-20-001-2119
Clamp

200012119
88971010051: RNCC: 3 | RNVC: 2

19 Jan 2004

5340-21-882-7036
Mounting Bracket

218827036
14017790: RNCC: 3 | RNVC: 2

23 Apr 1980

5340-20-003-8655
Mounting Plate

200038655
ST06-35119-1: RNCC: 3 | RNVC: 2
615-35119-1: RNCC: 5 | RNVC: 9

24 Jan 2008

5340-21-897-8662
Top Pin

218978662
34-102: RNCC: 3 | RNVC: 2

14 Feb 1985

5340-21-660-2035
Mortise Latch

216602035
18049: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-000-2787
Mounting Bracket

200002787
10617567-PW: RNCC: 3 | RNVC: 2

16 Jul 2002

5340-21-911-1215
Bail Handle

219111215
099-140: RNCC: 3 | RNVC: 2

2 Nov 1993

5340-21-921-7155
Mounting Bracket

219217155
10627000-PW: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-21-921-5726
Mechanical Stop

219215726
10627490-PG: RNCC: 3 | RNVC: 2

18 Jan 2002

5340-20-001-6804
Manual Control Lever

200016804
12038-1-0: RNCC: 3 | RNVC: 2

26 Oct 2004

5340-21-898-4676
Expansion Shield

218984676
53375: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-20-001-8711
Dust And Moisture Seal Boot

200018711
215-92718-4: RNCC: 3 | RNVC: 2

8 Feb 2005

5340-21-905-5784
Inf Handle Assembly

219055784
T-H-40100: RNCC: 3 | RNVC: 2

8 Dec 1989

5340-21-908-0572
Nonmetallic Bumper

219080572
CPFME1732-1: RNCC: 3 | RNVC: 2
ME1732-1: RNCC: 5 | RNVC: 2

31 Jan 1991

5340-20-006-0763
Access Cover

200060763
0656-035757-03: RNCC: 3 | RNVC: 2

25 Jan 2011

5340-21-880-7625
General Purpose Resilient Mount

218807625
VBE424-71A: RNCC: 3 | RNVC: 2
3522-500-15772: RNCC: 5 | RNVC: 2

15 Jan 1980

5340-21-913-9907
Strap Fastener Loop

219139907
MH-136: RNCC: 3 | RNVC: 2
DRINGCLP3/4: RNCC: 5 | RNVC: 2

29 Oct 1997

5340-20-001-4624
Access Cover

200014624
GD421-7807-1: RNCC: 3 | RNVC: 2

29 May 2004

5340-20-007-6129
Mounting Bracket

200076129
1277114-1: RNCC: 3 | RNVC: 2
1277114: RNCC: D | RNVC: 9

26 Apr 2013

5340-21-908-1007
Mounting Plate

219081007
-99-974-200: RNCC: 3 | RNVC: 2

12 Sep 1991

5340-21-901-8200
Rim Lock Set

219018200
M3480: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-21-912-0989
Filler Opening Cap

219120989
1423324: RNCC: 3 | RNVC: 2

11 Aug 1994

5340-21-908-3465
Threaded End Tensioning Tie Rod

219083465
8961396-1: RNCC: 3 | RNVC: 2

9 Nov 1991

5340-21-911-1384
Mounting Bracket

219111384
8105-1: RNCC: 3 | RNVC: 2

10 Dec 1993

5340-21-901-8134
Front Handle

219018134
40G0107101: RNCC: 3 | RNVC: 2

20 May 1986

5340-21-913-8935
Webbing Strap

219138935
10607670-80: RNCC: 3 | RNVC: 2

17 Apr 1997

5340-21-852-0347
General Purpose Resilient Mount

218520347
J6744: RNCC: 3 | RNVC: 2

11 Jan 1969

5340-21-874-3802
Pipe Bracket

218743802
FIGCT99-3-4: RNCC: 3 | RNVC: 2
CT99-3-4: RNCC: 5 | RNVC: 2

22 Mar 1977

5340-20-005-8112
Webbing Strap

200058112
GA-NS-1: RNCC: 3 | RNVC: 2
GA-NS-1: RNCC: 5 | RNVC: 2

30 Aug 2010

5340-21-920-8156
Turret Crossmember

219208156
10604136-1: RNCC: 3 | RNVC: 2

28 Sep 2000

5340-21-888-1626

5340-20-007-5576
Double Angle Bracket

200075576
10555173-29: RNCC: 3 | RNVC: 2
10555173: RNCC: D | RNVC: 9

2 Apr 2013

5340-21-860-3136
Anode Retaining Plug

218603136
067-33474A: RNCC: 3 | RNVC: 2
67-33474A: RNCC: 5 | RNVC: 2

18 Mar 1971

5340-21-921-5953
Plunger Assembly

219215953
9759164-1: RNCC: 3 | RNVC: 2
9759164-1: RNCC: 5 | RNVC: 2
9759164: RNCC: 6 | RNVC: 9

25 Jan 2002

5340-21-870-9531
Webbing Strap

218709531
7257: RNCC: 3 | RNVC: 2

3 Mar 1976

5340-21-855-1408
Resilient Mount

218551408
S3B50: RNCC: 3 | RNVC: 2

23 Jul 1969

5340-21-890-4667
Screw Thread Insert

218904667
45007: RNCC: 3 | RNVC: 2

18 Oct 1982

5340-21-905-5687
Mounting Bracket

219055687
991 12 68 0030: RNCC: 3 | RNVC: 2

30 Aug 1989

5340-21-862-6197
Key Blank

218626197
07KMB: RNCC: 3 | RNVC: 2

16 Sep 1971

5340-21-865-2116
Dust And Moisture Seal Protective Plug

218652116
P8ERA: RNCC: 3 | RNVC: 2

17 Mar 1972

5340-21-864-9609
Mounting Bracket

218649609
897824: RNCC: 3 | RNVC: 2

14 Jul 1972

5340-20-002-3352
Dust And Moisture Seal Protective Plug

200023352
200720: RNCC: 3 | RNVC: 2

2 Nov 2005

5340-20-005-0808
Mounting Bracket

200050808
B51007-234-1: RNCC: 3 | RNVC: 2

30 Sep 2009

5340-20-001-7988
Hinge Cover

200017988
GM3-C1315B: RNCC: 3 | RNVC: 2

30 Dec 2004

5340-21-112-1941
Strap Fastener Loop

211121941
B86: RNCC: 3 | RNVC: 2
121-501: RNCC: 3 | RNVC: 2
B1812: RNCC: 3 | RNVC: 2
MT750545: RNCC: 6 | RNVC: 9

4 Jun 1968

5340-21-847-5689
Screw Thread Insert

218475689
T02P56: RNCC: 3 | RNVC: 2

16 Aug 1967

5340-21-911-1223
Handwheel

219111223
1267: RNCC: 3 | RNVC: 2

2 Nov 1993

5340-21-920-2098
Dust And Moisture Seal Protective Plug

219202098
TMA12: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-21-891-6699
Electrical-Mechanical Equipment Post

218916699
CN169898: RNCC: 3 | RNVC: 2

29 May 1983

5340-21-908-0406
Detent Plunger

219080406
06357710: RNCC: 3 | RNVC: 2

19 Dec 1990

5340-21-920-8278
Angle Bracket

219208278
99112580029: RNCC: 3 | RNVC: 2

5 Oct 2000

5340-20-000-0865
Dust And Moisture Seal Protective Cap

200000865
714490: RNCC: 3 | RNVC: 2

30 Apr 2002

5340-21-846-1578
Key Blank

218461578
145E: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-920-7548
Swivel Caster

219207548
7104-BAL-RB: RNCC: 3 | RNVC: 2

24 Aug 2000

5340-21-660-2013
Flush Lock

216602013
RA295C: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-896-9900
Angle Bracket

218969900
B36175: RNCC: 3 | RNVC: 2

11 Nov 1984

5340-21-798-4029
Hinged Hasp

217984029
5379: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-000-0494
Webbing Strap

200000494
8603-10: RNCC: 3 | RNVC: 2
10552744-10: RNCC: 5 | RNVC: 2

17 Apr 2002

5340-20-000-5228
Hand Crank

200005228
366060-10: RNCC: 3 | RNVC: 2

5 Dec 2002

5340-21-905-5637
Mounting Bracket

219055637
704-132671-001-0: RNCC: 3 | RNVC: 2

1 Aug 1989

5340-20-010-9134
Access Cover

5340-21-912-3301
Mounting Plate

219123301
TE20003730-200: RNCC: 3 | RNVC: 2

30 Jun 1995

5340-20-006-8057
Mounting Bracket

200068057
10687996-011PW: RNCC: 3 | RNVC: 2

23 Mar 2012

5340-21-908-0663
Helical Compression Spring Seat

219080663
010183-004-319: RNCC: 3 | RNVC: 2

16 Mar 1991

5340-21-855-0947
Dust And Moisture Seal Protective Plug

218550947
P40A: RNCC: 3 | RNVC: 2

23 Jul 1969

5340-21-905-5949
Handwheel

219055949
CF349466A: RNCC: 3 | RNVC: 2

28 Mar 1990

5340-21-874-3770
Retaining Strap

218743770
234ST: RNCC: 3 | RNVC: 2

8 Mar 1977

5340-21-908-0960
Mounting Plate

219080960
407 010 107 097: RNCC: 3 | RNVC: 2

23 Aug 1991

5340-21-905-5328
Butt Hinge

219055328
8281324: RNCC: 3 | RNVC: 2
15010871580: RNCC: 5 | RNVC: 2

4 Jan 1989

5340-21-311-9407

5340-21-106-6903

5340-21-908-1002
Angle Bracket

219081002
61560110200: RNCC: 3 | RNVC: 2

7 Sep 1991

5340-21-659-0477
Catch Strike

216590477
300441: RNCC: 3 | RNVC: 1
9265218: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-903-3989
Mounting Bracket

219033989
16211: RNCC: 3 | RNVC: 2

12 Aug 1987

5340-21-893-8482
Bail Handle

218938482
155022-901: RNCC: 3 | RNVC: 2

15 Oct 1983

5340-21-852-9701

5340-20-000-8631
Left Support Plate

200008631
85.41141.1001: RNCC: 3 | RNVC: 2

26 Jun 2003

5340-21-868-9460
Mortise Lock Set

218689460
5284AZ10: RNCC: 3 | RNVC: 2

2 Aug 1974

5340-21-879-2784
Retaining Strap

218792784
DDDS000139: RNCC: 3 | RNVC: 2

4 Jul 1978

5340-20-000-0153
Mounting Bracket

200000153
10655325-011PW: RNCC: 3 | RNVC: 2

11 Apr 2002

5340-21-660-0338
Tee Hinge

216600338
937: RNCC: 3 | RNVC: 1
937-8: RNCC: 3 | RNVC: 2

25 May 1968

5340-20-000-2809
Mounting Bracket

200002809
10656461-011PEG: RNCC: 3 | RNVC: 2

16 Jul 2002

5340-20-007-1425
Mounting Plate

200071425
626-800759-001: RNCC: 3 | RNVC: 2

14 Sep 2012

5340-20-000-3694
Mounting Bracket

200003694
10656453-011PEW: RNCC: 3 | RNVC: 2

28 Aug 2002

5340-21-814-1806
Clip

218141806
457601: RNCC: 3 | RNVC: 2

13 Jun 1964

5340-21-820-9224
Dust And Moisture Seal Protective Cap

218209224
175682: RNCC: 3 | RNVC: 2

28 Jul 1965

5340-21-801-2324

5340-21-800-5555

5340-21-801-4669

5340-21-660-1481
Furniture Leg Tip

216601481
383: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-908-4534
Expansion Shield

219084534
1100-55: RNCC: 3 | RNVC: 2

25 Jul 1992

5340-21-820-1357
Loop Clamp

218201357
A3043F10: RNCC: 3 | RNVC: 2

30 Mar 1965

5340-21-805-5170
Dust And Moisture Seal Protective Cap

218055170
BK22689: RNCC: 3 | RNVC: 2

1 Dec 1968

5340-21-660-1415
Rope Cleat

216601415
DNCS48SK3PATT242: RNCC: 3 | RNVC: 2
AP242: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-840-9709
Barrel Bolt

218409709
69GP6: RNCC: 3 | RNVC: 1
1073: RNCC: 3 | RNVC: 2
302B: RNCC: 5 | RNVC: 2

6 Jun 1968

5340-20-005-9075
Mounting Plate

200059075
10681444-001PG: RNCC: 3 | RNVC: 2

9 Nov 2010

5340-21-889-4161
Plug Button

218894161
31529: RNCC: 3 | RNVC: 2

7 Sep 1982

5340-20-003-3776
Mounting Bracket

200033776
0378072: RNCC: 3 | RNVC: 2

1 Jun 2007

5340-21-114-7440

5340-21-114-8423

5340-21-002-4703

5340-20-005-5879
Mounting Bracket

200055879
AC40316-16: RNCC: 3 | RNVC: 2

18 May 2010

5340-21-908-0636
Seal Retaining Plate

219080636
205-040-188-003: RNCC: 3 | RNVC: 2

4 Apr 1991

5340-20-005-3182
Mounting Plate

200053182
85330367-113: RNCC: 3 | RNVC: 2

17 Feb 2010

5340-21-878-0193
Mortise Lock Set

218780193
C51PDPLY630: RNCC: 3 | RNVC: 2

20 Dec 1977

5340-21-891-6678
Arm Assembly

218916678
A40X11LH: RNCC: 3 | RNVC: 2

29 May 1983

5340-21-891-6319
Butt Hinge

218916319
BB1279US26D: RNCC: 3 | RNVC: 2

2 Apr 1983

5340-21-908-0596
Rod End Clevis

219080596
06283913: RNCC: 3 | RNVC: 2
DIN 71752 G8X32: RNCC: 5 | RNVC: 9

8 Feb 1991

5340-21-886-8142
Door Assembl Closer

218868142
10-185T6RH: RNCC: 3 | RNVC: 2

10 Oct 1981

5340-20-006-8952
Handwheel

200068952
MVHC2: RNCC: 3 | RNVC: 2

14 May 2012

5340-20-001-4774
Double Angle Bracket

200014774
10625974: RNCC: 3 | RNVC: 2

4 Jun 2004

5340-21-877-3732
Retaining Strap

218773732
32587: RNCC: 3 | RNVC: 2

1 Nov 1977

5340-21-905-5639
Block Fairlead Section

219055639
704-137028-901-0: RNCC: 3 | RNVC: 2

1 Aug 1989

5340-20-007-1759
Mounting Bracket

200071759
72690: RNCC: 3 | RNVC: 2

2 Oct 2012

5340-20-005-8845
Angle Bracket

200058845
PAAG104806: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-21-311-8598

5340-21-901-8737
Antipilferage Seal

219018737
PRONGLOK4-1SVC: RNCC: 3 | RNVC: 2

8 Oct 1987

5340-21-900-1354
Strapping

219001354
MP-2001: RNCC: 3 | RNVC: 2

5 Dec 1985

5340-21-908-3603
Access Cover

219083603
CF814487A: RNCC: 3 | RNVC: 2

18 Dec 1991

5340-21-808-3852
Loop Clamp

218083852
MS21919WDH9: RNCC: 2 | RNVC: 2

23 May 1963

5340-20-003-7667
General Purpos Hook

200037667
099-287: RNCC: 3 | RNVC: 2

6 Dec 2007

5340-21-911-8850
Double Angle Bracket

219118850
CF836334B: RNCC: 3 | RNVC: 2

17 May 1994

5340-21-846-1565
Key Blank

218461565
61Z: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-901-8205
Strap Hinge

219018205
8482230: RNCC: 3 | RNVC: 2
B183827103: RNCC: 5 | RNVC: 2

18 Jul 1986

5340-21-897-8255
Plug Assembly

218978255
B183198005: RNCC: 3 | RNVC: 2

13 Dec 1984

5340-21-888-7872
Swivel Caster

218887872
5616: RNCC: 3 | RNVC: 2
5616: RNCC: 5 | RNVC: 2

27 Mar 1982

5340-21-913-0803
Grooved Clamp Coupling

219130803
18276-200: RNCC: 3 | RNVC: 2

23 May 1996

5340-21-913-4183
Assembly Latch

219134183
10627524: RNCC: 3 | RNVC: 2

12 Feb 1998

5340-21-817-8839

5340-21-660-2126
Rim Lock

216602126
1210: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-712-6788

5340-21-712-6558

5340-21-712-6635

5340-21-895-0385
Loop Clamp

218950385
5108560: RNCC: 3 | RNVC: 2

4 Feb 1984

5340-20-001-9734
Spacing Threaded Standoff

200019734
10617704: RNCC: 3 | RNVC: 2

5 Apr 2005

5340-21-855-3030
Retaining Strap

218553030
384928: RNCC: 3 | RNVC: 2
A384928: RNCC: 3 | RNVC: 2

19 Sep 1969

5340-20-002-3158
Block Clamp

200023158
200-1327-101: RNCC: 3 | RNVC: 2
200-1327: RNCC: D | RNVC: 9

25 Oct 2005

5340-20-007-6065
Mounting Bracket

200076065
10706556-001PEW: RNCC: 3 | RNVC: 2
10706556: RNCC: D | RNVC: 9

24 Apr 2013

5340-20-007-1273
Loop Clamp

200071273
ST2231-06: RNCC: 3 | RNVC: 2

7 Sep 2012

5340-21-912-6803
Rod End Clevis

219126803
F1301-192730A: RNCC: 3 | RNVC: 2

12 Sep 1995

5340-21-921-5586
Access Cover

219215586
10650820: RNCC: 3 | RNVC: 2

15 Jan 2002

5340-21-862-5976
Mortise Lock Set

218625976
324: RNCC: 3 | RNVC: 2

17 Jun 1971

5340-21-901-8959
Loop Clamp

219018959
WW403718: RNCC: 3 | RNVC: 2

3 Mar 1988

5340-20-001-9292
Angle Bracket

200019292
10639203: RNCC: 3 | RNVC: 2

8 Mar 2005

5340-21-886-5810
Expansion Shield

218865810
JS38M: RNCC: 3 | RNVC: 2

31 Aug 1981

5340-21-857-8371
Bracket

218578371
554220: RNCC: 3 | RNVC: 2

12 Feb 1970

5340-21-846-1552
Key Blank

218461552
A11P: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-908-0568
Mounting Bracket

219080568
04053914: RNCC: 3 | RNVC: 2

29 Jan 1991

5340-21-713-0009

5340-20-000-4584
Mounting Bracket

200004584
10618310: RNCC: 3 | RNVC: 2

11 Oct 2002

5340-21-874-2872
Dust And Moisture Seal Protective Cap-Plug

218742872
7046: RNCC: 3 | RNVC: 2

25 Jan 1977

5340-21-897-8325
Retaining Strap

218978325
STRAP2IN: RNCC: 3 | RNVC: 2

19 Dec 1984

5340-21-800-7081

Load More Results