What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

Hardware, Commercial - Canada (CA)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Canada (CA) - NCB is 20 or 21

Page 21 of 64

NSN Format for Hardware, Commercial
Codified by Canada

53	40	21	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Canada (CA)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 190 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 63 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 26 Items
What is a Rod End Connector? 44 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 69 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 226 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 94 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 20 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 582 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 43 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 202 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 65 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Shelf Bracket? 33 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Door Hook And Eye? 22 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 77 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 12 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 23 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 23 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 44 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 13 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is a Friction Catch? 38 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 15 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 39 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 26 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 86 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 20 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 42 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 91 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 57 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 25 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 163 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 101 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 21 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 16 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 288 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 52 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 23 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 131 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 24 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 41 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 70 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 45 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 210 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 163 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 82 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 44 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 38 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 25 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 20 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 42 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 18 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Glazier Point? 10 Items: A Glazier Point (POINT,GLAZIER) is a piece of thin sheet metal, triangular or diamond shaped, designed to hold a pane of glass in a wooden sash.
What is an Angle Bracket? 1105 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 81 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 32 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1130 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 20 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 49 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 37 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Quick Release Plunger? 13 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 114 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flush Catch? 97 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 13 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 86 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 115 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 177 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 24 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 53 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 219 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 40 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 494 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 353 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 55 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 51 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 12 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 601 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 32 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 39 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 34 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 41 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 21 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping? 19 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 93 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 117 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 31 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 45 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 19 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 832 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 35 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 40 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 75 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 106 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Picture Hanger? 10 Items: A Picture Hanger (HANGER,PICTURE) is a hook like device that is secured to walls, bulkheads, columns and the like, by means of a nail, screw, magnet or adhesive backed cloth, that is included with and/or attached to the hook. It is designed to hold and suspend variuos items such as photographs, paintings, maps, documents, etc.
What is a Protection Bellows? 16 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 57 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 49 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 2535 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 19 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 16 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 1222 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 48 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 64 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Threaded Hinged Standoff? 11 Items: A Threaded Hinged Standoff (STANDOFF,HINGED,THREADED) is a standoff, internally and/or externally, threaded on both ends with a hinge or pivot point to allow for independent movement of the ends.
What is a Spacing Threaded Standoff? 178 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 115 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a Crank Handle? 13 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 29 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Mechanic Equipment Hardware Kit? 87 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Dust And Moisture Seal Protective Cover? 38 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 51 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 308 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 41 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 39 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 178 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 27 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 80 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 86 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 21 of 64

5340-20-003-4059
Webbing Strap

200034059
2108-A25: RNCC: 3 | RNVC: 2

15 Jun 2007

5340-21-874-3794
Lavatory Door Latch

218743794
6626: RNCC: 3 | RNVC: 2

22 Mar 1977

5340-21-882-8948
Pawl Fastener

218828948
44-99-222-63: RNCC: 3 | RNVC: 2
42-127-1: RNCC: 5 | RNVC: 2

29 Oct 1980

5340-21-868-8261
Turnbuckle

218688261
HG-227: RNCC: 3 | RNVC: 1

15 Mar 1973

5340-21-891-5679
Hook

218915679
W6-V-49: RNCC: 3 | RNVC: 2

7 Feb 1983

5340-21-905-5785
Access Cover

219055785
SXA1070337: RNCC: 3 | RNVC: 2

1 Dec 1989

5340-21-867-0020
General Purpose Resilient Mount

218670020
897867: RNCC: 3 | RNVC: 2

14 Jul 1972

5340-20-005-3056
Dust And Moisture Seal Protective Plug

200053056
13469C-1: RNCC: 1 | RNVC: 2
PLUG: RNCC: 3 | RNVC: 2

16 Feb 2010

5340-21-915-0165
Spigot

219150165
10616767: RNCC: 3 | RNVC: 2

2 Apr 1999

5340-21-882-8098
Screw Thread Insert

218828098
SL2748-08S: RNCC: 3 | RNVC: 2

30 Apr 1980

5340-21-913-4675
General Purpose Access Door

219134675
10627106-PW: RNCC: 3 | RNVC: 2
10627106: RNCC: D | RNVC: 9

4 Feb 1998

5340-21-893-7880
Rim Latch

218937880
5669: RNCC: 3 | RNVC: 2
D-3084: RNCC: 5 | RNVC: 2

1 Aug 1983

5340-21-865-2127
Strapping

218652127
59-158: RNCC: 3 | RNVC: 2

17 Mar 1972

5340-21-893-7871

5340-20-004-0718
Access Cover

200040718
B30502-107-1: RNCC: 3 | RNVC: 2

1 May 2008

5340-20-007-3914
Mounting Plate

200073914
10709115-011PEW: RNCC: 3 | RNVC: 2
10709115: RNCC: D | RNVC: 9

14 Jan 2013

5340-20-001-0942
Mounting Bracket

200010942
C20600-132-1: RNCC: 3 | RNVC: 2

30 Oct 2003

5340-20-007-7350
General Purpose Resilient Mount

200077350
10706366-001: RNCC: 3 | RNVC: 2

27 Jun 2013

5340-21-660-0195
Butt Hinge

216600195
291: RNCC: 3 | RNVC: 1
291C4 3 1/2 X 3 1/2: RNCC: 3 | RNVC: 2
131-7107: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-005-5866
Mechanical Stop

200055866
IPL19800-05-18: RNCC: 3 | RNVC: 2

18 May 2010

5340-20-003-7881
Keeper

200037881
10666136-001PG: RNCC: 3 | RNVC: 2
10666136: RNCC: 5 | RNVC: 1

19 Dec 2007

5340-21-796-7013
Access Cover

217967013
1304-418: RNCC: 3 | RNVC: 2
09W9158: RNCC: 6 | RNVC: 9
1250LM60125: RNCC: 6 | RNVC: 9

30 Nov 1965

5340-21-921-1951
Webbing Strap

219211951
6899-SS: RNCC: 3 | RNVC: 2

15 Jun 2001

5340-21-491-5065

5340-21-660-2262

5340-21-817-9286

5340-21-855-0941
Plug

218550941
2483832-5: RNCC: 3 | RNVC: 2
2483832-5: RNCC: 3 | RNVC: 2

23 Jul 1969

5340-21-908-0745
Section Block Clamp

219080745
CF 437 700 A: RNCC: 3 | RNVC: 2

25 Apr 1991

5340-21-889-8332
Angle Bracket

218898332
4044167-0002: RNCC: 3 | RNVC: 2

14 Jun 1982

5340-21-908-0602
Mounting Bracket

219080602
SKL-9103: RNCC: 3 | RNVC: 2

21 Feb 1991

5340-21-908-3947
Door Holder

219083947
391-05426: RNCC: 3 | RNVC: 2

6 Mar 1992

5340-21-908-3587
Mounting Bracket

219083587
CF333233A: RNCC: 3 | RNVC: 2

13 Dec 1991

5340-21-912-6781
Spacing Threaded Standoff

219126781
8860878-5: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-21-905-5695
Double Angle Bracket

219055695
600-37183-1: RNCC: 3 | RNVC: 2

2 Sep 1989

5340-21-911-9172
Office Machine Lock

219119172
50505 62012: RNCC: 3 | RNVC: 2

21 Jul 1994

5340-21-865-9869

5340-20-002-8410
Clamp

200028410
PWC54338: RNCC: 3 | RNVC: 2

18 Jul 2006

5340-20-007-6681
Mounting Bracket

200076681
10702188-011PW: RNCC: 3 | RNVC: 2
10702188: RNCC: D | RNVC: 9

27 May 2013

5340-20-003-3114
Mounting Bracket

200033114
A20618-207-1: RNCC: 3 | RNVC: 2
A20618-207-1: RNCC: 5 | RNVC: 2

19 Apr 2007

5340-21-874-3585
Loop Clamp

218743585
71-058-5: RNCC: 3 | RNVC: 2

15 Feb 1977

5340-21-913-8931
Loop Clamp

219138931
022-2186-01: RNCC: 3 | RNVC: 2

9 Jul 1997

5340-21-896-9569
Lock

218969569
E-78: RNCC: 3 | RNVC: 2
EQ1-A081: RNCC: 3 | RNVC: 2

23 Sep 1984

5340-20-008-2150
Mounting Plate

200082150
19-0030-0: RNCC: 3 | RNVC: 2

8 Jan 2014

5340-21-910-8744
Catch Strike

219108744
TE10003884-001: RNCC: 3 | RNVC: 2

6 Jul 1993

5340-21-660-2350

5340-21-491-5015

5340-21-841-8168

5340-21-888-8407
Resilient Mount

218888407
2000: RNCC: 3 | RNVC: 2

26 Apr 1982

5340-21-840-9741
Mortise Lock Set

218409741
3241-4: RNCC: 3 | RNVC: 2
130-6246: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-908-5111

5340-21-911-9521
Pawl Fastener

219119521
DL-9265303-1: RNCC: 3 | RNVC: 2
DL-9265303-1: RNCC: 3 | RNVC: 2

10 Sep 1994

5340-20-006-9877
Linkage Block

200069877
40614: RNCC: 3 | RNVC: 2

27 Jun 2012

5340-21-817-9648

5340-20-004-0544
Mounting Bracket

200040544
10659048-011: RNCC: 3 | RNVC: 2

25 Apr 2008

5340-21-898-4652
Expansion Shield

218984652
159655: RNCC: 3 | RNVC: 2
315-9655: RNCC: 3 | RNVC: 2
9655: RNCC: 3 | RNVC: 2

15 Aug 1985

5340-21-905-5367
Retaining Strap

219055367
0593437-00: RNCC: 3 | RNVC: 2

14 Feb 1989

5340-20-005-8518
Mounting Bracket

200058518
0669-779832-01: RNCC: 3 | RNVC: 2

28 Sep 2010

5340-21-886-2103
Dust And Moisture Seal Protective Plug

218862103
4031007: RNCC: 3 | RNVC: 2
4031007: RNCC: 3 | RNVC: 2
122233: RNCC: 5 | RNVC: 2
122233: RNCC: 5 | RNVC: 2

16 Jun 1981

5340-21-914-8212
Support Plate

219148212
4005T74P01: RNCC: 3 | RNVC: 2

12 Jun 1998

5340-21-817-5146

5340-21-806-1583

5340-21-897-8397
Compression Cup

218978397
JH-3141: RNCC: 3 | RNVC: 2

7 Jan 1985

5340-20-000-0293
Butt Hinge

200000293
10656021-001PEG: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-21-913-8132
Turnbuckle

219138132
215-26105-22: RNCC: 3 | RNVC: 2

1 Mar 1997

5340-20-005-1083
Mounting Bracket

200051083
B30603-208-1: RNCC: 3 | RNVC: 2

15 Oct 2009

5340-20-000-1415
Mounting Plate

200001415
10653195-001PEW: RNCC: 3 | RNVC: 2

13 May 2002

5340-20-007-3892
Mounting Bracket

200073892
10706427-011PW: RNCC: 3 | RNVC: 2
10706427: RNCC: D | RNVC: 9

14 Jan 2013

5340-21-842-7292
Loop Clamp

218427292
3009T69P01: RNCC: 3 | RNVC: 2

26 Apr 1966

5340-20-003-7909
Roller

200037909
AC19200-04: RNCC: 3 | RNVC: 2

20 Dec 2007

5340-20-005-4366
Mounting Plate

200054366
B30400-027-6: RNCC: 3 | RNVC: 2

12 Apr 2010

5340-21-910-8837
Mounting Bracket

219108837
TE10002680-001: RNCC: 3 | RNVC: 2

20 Jul 1993

5340-21-853-8119
Hinge

218538119
012-109-01323-0: RNCC: 3 | RNVC: 2
010-109-013400-013: RNCC: 5 | RNVC: 2

23 May 1969

5340-21-874-2915

5340-21-913-6473
Access Cover

219136473
CF8679124: RNCC: 3 | RNVC: 2

10 Jan 1997

5340-20-002-1399
Access Cover

200021399
10660761-011: RNCC: 3 | RNVC: 2
10660761: RNCC: D | RNVC: 9

5 Jul 2005

5340-20-007-2106
Mounting Bracket

200072106
10677684-011: RNCC: 3 | RNVC: 2
10677684: RNCC: D | RNVC: 9

16 Oct 2012

5340-21-109-2518
Leather Strap

211092518
DAD439A: RNCC: 3 | RNVC: 2
503389: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-840-9341

5340-21-841-0599

5340-20-005-0403
Mounting Bracket

200050403
524-354249-000: RNCC: 3 | RNVC: 2

8 Sep 2009

5340-21-868-9050
Flat Washer

218689050
71: RNCC: 3 | RNVC: 2
5340-5145: RNCC: 6 | RNVC: 9

31 Dec 1973

5340-21-804-3844

5340-21-660-0139
Butt Hinge

216600139
02162 2 1/2 X 1 3/4: RNCC: 3 | RNVC: 2
02162: RNCC: 5 | RNVC: 2
02162: RNCC: 5 | RNVC: 2

6 Jun 1968

5340-21-660-1011
Door Holder

216601011
0-0: RNCC: 3 | RNVC: 1

6 Jun 1968

5340-20-004-1727
Mounting Plate

200041727
10639268: RNCC: 3 | RNVC: 2

18 Jun 2008

5340-21-886-6096
Flush Catch

218866096
H601S080C170: RNCC: 3 | RNVC: 2
ST9M429S080C170: RNCC: 5 | RNVC: 2

21 Sep 1981

5340-21-866-9691
Flush Door Ring

218669691
1215J1: RNCC: 3 | RNVC: 2

18 Aug 1972

5340-21-896-9597

5340-21-908-0281
Hand Crank

219080281
5126550: RNCC: 3 | RNVC: 2
01137627: RNCC: 5 | RNVC: 2

2 Nov 1990

5340-21-812-9997

5340-21-811-0160

5340-20-001-2876
Butt Hinge

200012876
B81002-056-1: RNCC: 3 | RNVC: 2
B81002-056: RNCC: D | RNVC: 9

4 Mar 2004

5340-20-003-9864
Tilt Lock Lever

200039864
8466-2008-00: RNCC: 3 | RNVC: 2

28 Mar 2008

5340-21-888-1417
Pcb Guide

218881417
512206-0217: RNCC: 3 | RNVC: 2

21 Jun 1982

5340-20-008-0074
Pipe Hanger

200080074
CI-1408: RNCC: 3 | RNVC: 2

15 Oct 2013

5340-21-863-3506
Foot Bolt

218633506
250: RNCC: 3 | RNVC: 1
130-2916: RNCC: 6 | RNVC: 9

18 Nov 1971

5340-20-000-8298
Access Cover

200008298
10656464-011: RNCC: 3 | RNVC: 2
10656464: RNCC: D | RNVC: 9

12 Jun 2003

5340-20-002-6077
Pad-Stop

200026077
600-10600-3: RNCC: 3 | RNVC: 2

3 Apr 2006

5340-20-007-2990
General Purpose Resilient Mount

200072990
BC/SYSE/C/0001-1: RNCC: 3 | RNVC: 2

3 Dec 2012

5340-21-914-0836
Multiple Angle Bracket

219140836
858226: RNCC: 3 | RNVC: 2

12 Apr 1997

5340-21-921-4748
Angle Bracket

219214748
B61000-166-2: RNCC: 3 | RNVC: 2

29 Nov 2001

5340-21-840-8663
Spring Tension Clip

218408663
A2946-11-1: RNCC: 3 | RNVC: 2

26 Nov 1965

5340-21-914-2671
Manual Control Handle

219142671
369387: RNCC: 3 | RNVC: 2

19 Sep 1997

5340-21-803-7448

5340-21-859-4975
Padlock

218594975
GA15416: RNCC: 3 | RNVC: 2
GA15416: RNCC: 3 | RNVC: 2

15 Oct 1970

5340-21-816-8740

5340-20-003-5153
Tee Bar

200035153
10665460-011PG: RNCC: 3 | RNVC: 2
10665460: RNCC: 5 | RNVC: 1

9 Aug 2007

5340-21-908-3948
Snap Hook

219083948
97026: RNCC: 3 | RNVC: 2

6 Mar 1992

5340-21-896-2681
Electrical-Mechanical Equipment Post

218962681
16-05-05: RNCC: 3 | RNVC: 2

12 Aug 1984

5340-21-884-0701
Door Knob Spindle

218840701
F1174: RNCC: 3 | RNVC: 1
F1174 X 5/16 X 4 1/8: RNCC: 3 | RNVC: 2

31 Mar 1981

5340-20-007-6785
Mounting Bracket

200076785
10705934-011PEW: RNCC: 3 | RNVC: 2
10705934: RNCC: D | RNVC: 9

28 May 2013

5340-21-886-2059
Rim Lock Set

218862059
500-53-35: RNCC: 3 | RNVC: 2

16 Jun 1981

5340-20-001-5401
Mounting Plate

200015401
600-52220-20: RNCC: 3 | RNVC: 2
600-52220: RNCC: D | RNVC: 9

16 Jul 2004

5340-21-897-8603
Rigid Caster

218978603
07RN08123R: RNCC: 3 | RNVC: 2

11 Feb 1985

5340-21-882-8371
Angle Bracket

218828371
AP669983: RNCC: 3 | RNVC: 2

26 Jun 1980

5340-20-005-0874
Angle Bracket

200050874
0989091: RNCC: 3 | RNVC: 2

2 Oct 2009

5340-20-005-1228
Mounting Plate

200051228
B30603-227-1: RNCC: 3 | RNVC: 2

22 Oct 2009

5340-20-002-4141
Ground Bracket

200024141
130014DE734-1: RNCC: 3 | RNVC: 2
130014DE734: RNCC: D | RNVC: 9

16 Dec 2005

5340-21-912-5904
Clip Set Retention

219125904
43575888: RNCC: 3 | RNVC: 2

27 Jul 1995

5340-21-840-9599
Eye Hook

218409599
0-0: RNCC: 3 | RNVC: 1

6 Jun 1968

5340-21-895-2390
Manual Control Lever

218952390
R9W1877-191: RNCC: 3 | RNVC: 2

28 Jan 1984

5340-20-006-0112
Mounting Plate

200060112
0656-034746-12: RNCC: 3 | RNVC: 2

20 Dec 2010

5340-20-003-4809
Assembly Guard

200034809
10663948-011PG: RNCC: 3 | RNVC: 2
10663948: RNCC: 5 | RNVC: 1

25 Jul 2007

5340-21-914-2605
Threaded Rod End

219142605
WW404400A: RNCC: 3 | RNVC: 2

26 Jun 1997

5340-20-004-8295
Mounting Plate

200048295
IT2365-R-20: RNCC: 3 | RNVC: 2

21 May 2009

5340-20-006-0768
Mounting Bracket

200060768
82510044-109: RNCC: 3 | RNVC: 2

25 Jan 2011

5340-20-003-8069
Mrv Bow

200038069
0777248: RNCC: 3 | RNVC: 2

24 Dec 2007

5340-21-660-0872
Sash Balance

216600872
5F: RNCC: 3 | RNVC: 2
130-2069: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-901-8168
Mail Box Lock

219018168
LCU38: RNCC: 3 | RNVC: 2

18 Jun 1986

5340-21-857-8181
Loop Clamp

218578181
286840: RNCC: 3 | RNVC: 2

12 Feb 1970

5340-21-905-5146
Expansion Shield

219055146
4015-00700: RNCC: 3 | RNVC: 2
4015-7: RNCC: 5 | RNVC: 2

25 Aug 1988

5340-21-908-4218
Door Holder

219084218
2352551: RNCC: 3 | RNVC: 2

17 Jun 1992

5340-21-905-5069
Expansion Shield

219055069
635391: RNCC: 3 | RNVC: 2
635391: RNCC: 3 | RNVC: 2
635391: RNCC: 3 | RNVC: 2

5 Jul 1988

5340-20-005-9123
Multiple Angle Bracket

200059123
10667679-011PEG: RNCC: 3 | RNVC: 2

10 Nov 2010

5340-20-003-4902
Access Cover

200034902
10665147-001PW: RNCC: 3 | RNVC: 2
10665147: RNCC: 5 | RNVC: 1

27 Jul 2007

5340-20-002-8397
Mounting Bracket

200028397
10653036-001: RNCC: 3 | RNVC: 2
10653036: RNCC: 5 | RNVC: 1

18 Jul 2006

5340-21-330-6328
Rod End Clevis

213306328
11-427C17-2330: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-006-0042
Retaining Strap

200060042
0656-034167-01: RNCC: 3 | RNVC: 2

17 Dec 2010

5340-20-004-3750
Sector Clamp

200043750
TE10008115-002: RNCC: 3 | RNVC: 2
3887000870: RNCC: 5 | RNVC: 2

28 Oct 2008

5340-21-072-2292

5340-21-077-0801

5340-21-912-1073
Mounting Asse Plate

219121073
9475556: RNCC: 3 | RNVC: 2

30 Aug 1994

5340-21-908-4190
Mounting Bracket

219084190
CF 826 084 AE: RNCC: 3 | RNVC: 2

6 Jun 1992

5340-21-915-0112
Plain Solid Disk

219150112
10558221: RNCC: 3 | RNVC: 2

26 Feb 1999

5340-21-103-2357

5340-21-660-1020
Doorstop

216601020
S624: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-000-7363
Dirt And Liquid Deflector

200007363
356H-0002-B: RNCC: 3 | RNVC: 2

28 Apr 2003

5340-21-311-9619

5340-21-840-9083
Pipe Hanger Extension Bar

218409083
A1211: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-908-4292
Bail Handle

219084292
TE10001893-001: RNCC: 3 | RNVC: 2

17 Apr 1992

5340-21-853-5000
Loop Clamp

218535000
5340-0727: RNCC: 6 | RNVC: 9

22 Mar 1969

5340-20-007-3301
Mounting Bracket

200073301
GPSM0000: RNCC: 3 | RNVC: 2
GPSM0000: RNCC: 5 | RNVC: 2

26 Feb 2013

5340-21-108-3802

5340-21-108-5146

5340-21-104-9019

5340-21-920-2780
Rope Cleat

219202780
210: RNCC: 3 | RNVC: 2

19 Aug 1999

5340-20-007-1438
Mounting Bracket

200071438
600193-105: RNCC: 3 | RNVC: 2

14 Sep 2012

5340-21-908-3352
Angle Bracket

219083352
1349075: RNCC: 3 | RNVC: 2

11 Oct 1991

5340-21-914-1918
Lever Guide

219141918
1237-228-1: RNCC: 3 | RNVC: 2

30 Jul 1998

5340-20-000-1577
Mounting Bracket

200001577
9876857-1: RNCC: 3 | RNVC: 2

16 May 2002

5340-21-910-8786
Angle Bracket

219108786
8461996-2: RNCC: 3 | RNVC: 2

9 Jul 1993

5340-20-002-5304
Blank Panel

200025304
130014DE301-1: RNCC: 3 | RNVC: 2
130014DE301: RNCC: D | RNVC: 9

24 Feb 2006

5340-21-660-1915
Turnbuckle

216601915
G227: RNCC: 3 | RNVC: 1
G227: RNCC: 3 | RNVC: 1
G227-5-16X4 1-2: RNCC: 3 | RNVC: 2
G227 5/16 X 4 1/2: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-911-8261
Rod End Clevis

219118261
2090-0901: RNCC: 3 | RNVC: 2

19 Mar 1994

5340-21-103-4541

5340-21-103-4544

5340-21-040-6050

5340-21-920-8139
Angle Bracket

219208139
B049190: RNCC: 3 | RNVC: 2

27 Sep 2000

5340-21-660-2050
Rim Lock

216602050
44: RNCC: 3 | RNVC: 2
132-2042: RNCC: 6 | RNVC: 9

25 May 1968

5340-21-870-8849

5340-21-660-0369
Butt Hinge

216600369
838: RNCC: 3 | RNVC: 1
838-1: RNCC: 3 | RNVC: 1
838-1 X 1: RNCC: 3 | RNVC: 2
69GP1: RNCC: 4 | RNVC: 1
1G49850: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-860-5700
Butt Hinge

218605700
179: RNCC: 3 | RNVC: 1
241: RNCC: 3 | RNVC: 1
F179-4 IN: RNCC: 3 | RNVC: 2
F179-4 IN: RNCC: 3 | RNVC: 2

15 Oct 1970

5340-21-853-7265

5340-21-888-1444
Bracket

218881444
1451836: RNCC: 3 | RNVC: 2

30 Jan 1982

5340-21-660-0147
Butt Hinge

216600147
69GP1TYPE131: RNCC: 2 | RNVC: 1
838 1 1/2 X 1 3/8: RNCC: 3 | RNVC: 2

14 Jul 1964

5340-21-914-1607
Lug

219141607
S1247-2: RNCC: 3 | RNVC: 2

14 Jun 1997

5340-21-908-0888
Mounting Bracket

219080888
8961023.01: RNCC: 3 | RNVC: 2

12 Jul 1991

5340-21-900-2959
Filler Opening Cap

219002959
10080: RNCC: 3 | RNVC: 2

28 Oct 1987

5340-20-001-8717
Bottom Hinge

200018717
215-22116-30: RNCC: 3 | RNVC: 2

9 Feb 2005

5340-21-660-1879
Turnbuckle

216601879
304: RNCC: 3 | RNVC: 1
304X5/16-4 1/2: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-003-7621
Mounting Plate

200037621
0078193-1: RNCC: 3 | RNVC: 2
0078193: RNCC: 5 | RNVC: 1

4 Dec 2007

5340-21-905-5980
Access Cover

219055980
704-130001-902-0: RNCC: 3 | RNVC: 2

28 Apr 1990

5340-20-002-4126
Mounting Bracket

200024126
130014DE341-1: RNCC: 3 | RNVC: 2
130014DE341: RNCC: D | RNVC: 9

15 Dec 2005

5340-21-897-8667
Master Pin

218978667
34-205: RNCC: 3 | RNVC: 2

14 Feb 1985

5340-20-001-3994
Access Cover

200013994
716956-001: RNCC: 3 | RNVC: 2
716956: RNCC: D | RNVC: 9

27 Apr 2004

5340-21-660-1621
Sliding Door Hanger

216601621
91: RNCC: 3 | RNVC: 2
133-6873: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-660-1475
Mending Plate

216601475
B222: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-311-1800

5340-21-311-1839

5340-20-006-4252
Mounting Bracket

200064252
091895-M006: RNCC: 3 | RNVC: 2

21 Jul 2011

5340-21-817-2022

5340-20-002-5859
Large Cover

200025859
2005F03-04452: RNCC: 3 | RNVC: 2

20 Mar 2006

5340-21-882-8916
Electrical-Mechanical Equipment Post

218828916
AP448544: RNCC: 3 | RNVC: 2

8 Oct 1980

5340-20-007-3928
Mounting Bracket

200073928
10703165-011PG: RNCC: 3 | RNVC: 2
10703165: RNCC: D | RNVC: 9

14 Jan 2013

5340-21-882-8082
Butt Hinge

218828082
4381488290: RNCC: 3 | RNVC: 2

7 May 1980

5340-21-879-5265
Door Closer Cover

218795265
4010-72GTAN: RNCC: 3 | RNVC: 2

11 Jul 1978

5340-20-004-3299
Guard Motor

200043299
3000507: RNCC: 3 | RNVC: 2
3000507: RNCC: 3 | RNVC: 9

2 Oct 2008

5340-20-000-2815
Mounting Bracket

200002815
10656846-011PEG: RNCC: 3 | RNVC: 2

16 Jul 2002

5340-21-905-5899
Retaining Strap

219055899
CF819542A: RNCC: 3 | RNVC: 2

23 Feb 1990

5340-21-111-0037

5340-20-003-5117
Enclosure

200035117
303932-701: RNCC: 3 | RNVC: 2

7 Aug 2007

5340-20-000-9368
Mounting Bracket

200009368
10626799-PEG: RNCC: 3 | RNVC: 2

8 Aug 2003

5340-21-920-1232
Stop Wedge

219201232
AED72081-1: RNCC: 3 | RNVC: 2
AED72081: RNCC: 5 | RNVC: 2
AED72081-1: RNCC: 5 | RNVC: 9

14 May 1999

5340-21-897-8666
Master Pin

218978666
34-204: RNCC: 3 | RNVC: 2

14 Feb 1985

5340-20-001-9715
Mounting Bracket

200019715
10655932-011: RNCC: 3 | RNVC: 2
10655932: RNCC: D | RNVC: 9

5 Apr 2005

5340-20-004-1339
Access Cover

200041339
6LA60614000: RNCC: 3 | RNVC: 2

22 May 2008

5340-20-002-9661
Mounting Bracket

200029661
10617760: RNCC: 3 | RNVC: 2

2 Oct 2006

5340-21-911-9570
Dust And Moisture Seal Protective Cover

219119570
3026831: RNCC: 3 | RNVC: 2

22 Oct 1994

5340-21-882-8673
Angle Bracket

218828673
AP669705: RNCC: 3 | RNVC: 2

10 Sep 1980

5340-21-855-1432
Resilient Mount

218551432
S1A4: RNCC: 3 | RNVC: 2

23 Jul 1969

5340-20-007-9206
Access Cover

200079206
0669-785600-01: RNCC: 3 | RNVC: 2

16 Sep 2013

5340-21-908-3492
Mounting Plate

219083492
87130046-001: RNCC: 3 | RNVC: 2

22 Nov 1991

5340-20-002-5897
Expansion Plug

200025897
MS9176-11: RNCC: 3 | RNVC: 2

22 Mar 2006

5340-20-001-0840
Webbing Strap

200010840
9279227-2: RNCC: 3 | RNVC: 2

24 Oct 2003

5340-20-005-9594
Mounting Bracket

200059594
85320922-101: RNCC: 3 | RNVC: 2

3 Dec 2010

5340-20-000-6807
Mounting Plate

200006807
8579980-1: RNCC: 3 | RNVC: 2
8579980-1: RNCC: 5 | RNVC: 2
8579980: RNCC: D | RNVC: 9

26 Mar 2003

5340-20-001-8134
Mounting Plate

200018134
10658586-001PW: RNCC: 3 | RNVC: 2
10658586: RNCC: D | RNVC: 9

6 Jan 2005

5340-21-660-1686
Expansion Shield

216601686
01052: RNCC: 3 | RNVC: 2
101-01052: RNCC: 3 | RNVC: 2
101-862: RNCC: 3 | RNVC: 2
862: RNCC: 3 | RNVC: 2
14: RNCC: 5 | RNVC: 1
115-0722: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-921-4159
Mounting Plate

219214159
10642739-PG: RNCC: 3 | RNVC: 2

6 Nov 2001

5340-20-006-6637
Mounting Bracket

200066637
4100709: RNCC: 3 | RNVC: 2

16 Jan 2012

5340-20-002-5308
Dust And Moisture Seal Boot

200025308
73877: RNCC: 3 | RNVC: 2

24 Feb 2006

5340-21-859-0006
Brass Pivot Hinge

218590006
R85: RNCC: 3 | RNVC: 2

16 Apr 1970

5340-21-905-5778
Pawl Fastener

219055778
1314636: RNCC: 3 | RNVC: 2

23 Nov 1989

5340-20-006-0207
Angle Bracket

200060207
0656-035507-03: RNCC: 3 | RNVC: 2

22 Dec 2010

5340-21-905-5793
General Purpose Resilient Mount

219055793
737-132-128870-1: RNCC: 3 | RNVC: 2

10 Jan 1990

5340-21-660-0214
Butt Hinge

216600214
242: RNCC: 3 | RNVC: 1
242 3 X 3: RNCC: 3 | RNVC: 2
69GP1: RNCC: 4 | RNVC: 1

6 Jun 1968

5340-21-660-1851
Turnbuckle

216601851
320-4: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-866-9675
Pipe Bracket

218669675
108: RNCC: 3 | RNVC: 1

14 Jul 1972

5340-21-866-9693
Adjustable Clevis

218669693
65: RNCC: 3 | RNVC: 1

18 Aug 1972

5340-20-007-6765
Mounting Bracket

200076765
10706872-001PEW: RNCC: 3 | RNVC: 2
10706872: RNCC: D | RNVC: 9

28 May 2013

5340-20-001-8076
Mounting Bracket

200018076
C51000-053-1: RNCC: 3 | RNVC: 2
C51000-053: RNCC: D | RNVC: 9

6 Jan 2005

5340-21-860-5366
Butt Hinge

218605366
TSBB1079C4: RNCC: 3 | RNVC: 1
FBB179-4-1-2: RNCC: 3 | RNVC: 1
BB1279US4 4.5 X 4.5 IN: RNCC: 3 | RNVC: 2
FBB179C4-4 1/2: RNCC: 3 | RNVC: 2
FBB179C4-4 1/2 X 4 1/2: RNCC: 3 | RNVC: 2
BB1279US4 4.5 X 4.5 IN: RNCC: 3 | RNVC: 2

15 Oct 1970

5340-20-007-6562
Hatch Clevis

200076562
10502656: RNCC: 3 | RNVC: 2

16 May 2013

5340-21-898-4122
Double Angle Bracket

218984122
AP707027: RNCC: 3 | RNVC: 2

20 Mar 1985

5340-21-891-5385
Dust And Moisture Seal Protective Cap-Plug

218915385
SC170: RNCC: 3 | RNVC: 2

19 Dec 1982

5340-21-859-3464
Angle Bracket

218593464
549165: RNCC: 3 | RNVC: 2

16 Jul 1970

5340-21-868-9254
Nonmetallic Bumper

218689254
95: RNCC: 3 | RNVC: 1

23 Apr 1974

5340-21-859-0076
Butt Hinge

218590076
F241: RNCC: 3 | RNVC: 1
69GP1: RNCC: 4 | RNVC: 1

16 Apr 1970

5340-20-000-9278
Mounting Bracket

200009278
10639589-PEW: RNCC: 3 | RNVC: 2

6 Aug 2003

5340-21-868-9456
Butt Hinge

218689456
1490C4: RNCC: 3 | RNVC: 1

2 Aug 1974

5340-20-007-6534
Mounting Plate

200076534
0875241-1: RNCC: 3 | RNVC: 2

15 May 2013

5340-21-860-5261
Butt Hinge

218605261
BB241: RNCC: 3 | RNVC: 1
BB241 3-1/2X3-1/2: RNCC: 3 | RNVC: 2

15 Oct 1970

5340-20-002-2178
Webbing Strap

200022178
0075770-1: RNCC: 3 | RNVC: 2

23 Aug 2005

5340-21-868-9440
Butt Hinge

218689440
804BP: RNCC: 3 | RNVC: 1
804BP2X2: RNCC: 3 | RNVC: 2

25 Jul 1974

5340-21-913-8794
Rim Clenching Clamp

219138794
215-51050: RNCC: 3 | RNVC: 2

15 Mar 1997

5340-21-895-0044
Plastic Strap

218950044
37-07775-001: RNCC: 3 | RNVC: 2

18 Dec 1983

5340-21-905-5348
Bail Handle

219055348
CF349977AR: RNCC: 3 | RNVC: 2

11 Jan 1989

5340-21-905-5216
Dust And Moisture Seal Protective Plug

219055216
W4098049: RNCC: 3 | RNVC: 2

16 Oct 1988

5340-20-002-3341
Dust And Moisture Seal Protective Plug

200023341
200722: RNCC: 3 | RNVC: 2

2 Nov 2005

5340-20-007-3886
Mounting Bracket

200073886
10706435-001PEW: RNCC: 3 | RNVC: 2
10706435: RNCC: D | RNVC: 9

14 Jan 2013

5340-21-882-8368
Electrical-Mechanical Equipment Post

218828368
AP662387AR: RNCC: 3 | RNVC: 2

26 Jun 1980

5340-21-893-7864
Lock Cylinder

218937864
253: RNCC: 3 | RNVC: 1
253-C15-1 1/2: RNCC: 3 | RNVC: 2

16 Jul 1983

5340-21-905-5403

5340-21-898-4328

5340-20-004-6044
Detent Plunger

200046044
304896-001: RNCC: 3 | RNVC: 2
304896: RNCC: 5 | RNVC: 1

24 Feb 2009

5340-21-660-0252
Butt Hinge

216600252
804: RNCC: 3 | RNVC: 1
804-5IN: RNCC: 3 | RNVC: 2
804 5 X 5: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-007-7203
General Purpose Guard Rail Section

200077203
SM-GR4X4X42: RNCC: 3 | RNVC: 2

20 Jun 2013

5340-21-807-9927
Flush Catch

218079927
H4700C072-250: RNCC: 3 | RNVC: 2
169-263: RNCC: 5 | RNVC: 2

23 May 1963

5340-20-004-1728
Access Cover

200041728
10671645-011PW: RNCC: 3 | RNVC: 2

18 Jun 2008

5340-21-660-1166
Coat And Hat Hook

216601166
082: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-911-9685
Mounting Bracket

219119685
M9510BK: RNCC: 3 | RNVC: 2

26 Nov 1994

5340-21-629-0064

5340-21-905-5401

5340-21-913-2979

5340-21-880-7360
Butt Hinge Leaf

218807360
6-027224-C3: RNCC: 3 | RNVC: 2
219-10022-4: RNCC: 3 | RNVC: 2

11 Sep 1979

5340-20-003-1193
Access Cover

200031193
C91001-376-1: RNCC: 3 | RNVC: 2

3 Jan 2007

5340-21-881-8373
Access Cover

218818373
240771: RNCC: 3 | RNVC: 2

4 Dec 1979

5340-21-866-4182
Angle Bracket

218664182
1423J: RNCC: 3 | RNVC: 2

19 May 1972

5340-21-897-8389
Doorstop

218978389
HA450-32D: RNCC: 3 | RNVC: 2
HA450-C32D: RNCC: 3 | RNVC: 2
HA450-32D: RNCC: 3 | RNVC: 2
HA450-C32D: RNCC: 3 | RNVC: 2

7 Jan 1985

5340-20-007-5126
Mounting Bracket

200075126
83220049-101: RNCC: 3 | RNVC: 2

7 Mar 2013

5340-21-853-5797
Angle Bracket

218535797
550423-001: RNCC: 3 | RNVC: 2
550423-1: RNCC: 5 | RNVC: 2

22 Mar 1969

5340-20-006-1857
Mounting Plate

200061857
85310374-001: RNCC: 3 | RNVC: 2

18 Mar 2011

5340-20-006-7598
Dust And Moisture Seal Protective Plug

200067598
10649890: RNCC: 3 | RNVC: 2

24 Feb 2012

5340-21-847-6288
Retaining Strap

218476288
4161: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-005-4418
Double Angle Bracket

200054418
9480765-1: RNCC: 3 | RNVC: 2

13 Apr 2010

5340-20-002-5579
Adapter Spigot

200025579
B4196-2: RNCC: 3 | RNVC: 2

14 Mar 2006

5340-21-905-5461
Retaining Strap

219055461
AP607745: RNCC: 3 | RNVC: 2

17 Mar 1989

5340-21-908-0270
Rod End Clevis

219080270
05128005: RNCC: 3 | RNVC: 2

31 Oct 1990

5340-21-840-9306
Door Closer

218409306
69GP2: RNCC: 2 | RNVC: 1
66: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-848-1909
Plug Button

218481909
B1563: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-002-7527
Access Cover

200027527
PWC37429: RNCC: 3 | RNVC: 2

5 Jun 2006

5340-21-913-1240
Mounting Bracket

219131240
04059556: RNCC: 3 | RNVC: 2

6 Sep 1996

5340-21-889-8309
Double Angle Bracket

218898309
16716010-00: RNCC: 3 | RNVC: 2

14 Jun 1982

5340-20-001-5369
Loop Clamp

200015369
0358577: RNCC: 3 | RNVC: 2

15 Jul 2004

5340-21-913-8937
Webbing Strap

219138937
10607670-50: RNCC: 3 | RNVC: 2

17 Apr 1997

5340-21-879-5899
Electrical-Mechanical Equipment Post

218795899
83000075: RNCC: 3 | RNVC: 2

13 Mar 1979

5340-21-895-0195
Angle Bracket

218950195
2C-H016A-00: RNCC: 3 | RNVC: 2

23 Jan 1984

5340-20-000-6786
Manual Control Handle

200006786
2046-0012-KU: RNCC: 3 | RNVC: 2
B-2046-0012: RNCC: D | RNVC: 9

25 Mar 2003

5340-21-910-8768
Coat And Hat Hook

219108768
2441-84: RNCC: 3 | RNVC: 2

8 Jul 1993

5340-21-880-7361
Butt Hinge Leaf

218807361
6-027224-C4: RNCC: 3 | RNVC: 2
219-10022-5: RNCC: 3 | RNVC: 2

11 Sep 1979

5340-21-912-9983
Dust And Moisture Seal Protective Cap

219129983
TFA-12-R: RNCC: 3 | RNVC: 2

7 Feb 1996

5340-21-908-0521
Mounting Plate

219080521
97775295-1: RNCC: 3 | RNVC: 2
SKL-9172: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-21-810-6954
Bracket Assembly

218106954
41A87565-10: RNCC: 3 | RNVC: 2

28 Nov 1963

5340-20-006-1669
Angle Bracket

200061669
87130041-101: RNCC: 3 | RNVC: 2

16 Mar 2011

5340-21-660-0136
Butt Hinge

216600136
02160: RNCC: 3 | RNVC: 1
02160: RNCC: 3 | RNVC: 1
02160 1 3/4 X 1: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-912-9870
Access Cover

219129870
12911-C: RNCC: 3 | RNVC: 2

24 Jan 1996

5340-21-920-0247
Mounting Bracket

219200247
10607048-2: RNCC: 3 | RNVC: 2

26 Mar 1999

5340-21-921-0123
Mounting Plate

219210123
9878224-1: RNCC: 3 | RNVC: 2

26 Jan 2001

5340-20-003-9565
Access Cover

200039565
9776059-1: RNCC: 3 | RNVC: 2

12 Mar 2008

5340-21-847-3529
Bracket

218473529
104447: RNCC: 3 | RNVC: 2

16 Aug 1967

5340-21-846-1581
Key Blank

218461581
A145F: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-003-7805
Rubber Pad

200037805
10639305-0009: RNCC: 3 | RNVC: 2

12 Dec 2007

5340-20-007-6105
Access Cover

200076105
10708826-001PEW: RNCC: 3 | RNVC: 2
107088226: RNCC: D | RNVC: 9

25 Apr 2013

5340-20-007-9880
Mounting Bracket

200079880
524-601118-000: RNCC: 3 | RNVC: 2

7 Oct 2013

5340-20-006-4887
Rim Latch

200064887
10679853-001: RNCC: 3 | RNVC: 2

6 Sep 2011

5340-21-910-8681
Webbing Strap

219108681
TE30002050-007: RNCC: 3 | RNVC: 2

18 Jun 1993

5340-21-908-0597
Clamping Catch

219080597
H296K1135: RNCC: 3 | RNVC: 2
50-910275-309: RNCC: 5 | RNVC: 2

12 Mar 1991

5340-21-842-6346
Sash Balance

218426346
13L: RNCC: 3 | RNVC: 2
130-2083: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-007-6694
Mounting Bracket

200076694
10706775-001PW: RNCC: 3 | RNVC: 2
10706775: RNCC: D | RNVC: 9

27 May 2013

5340-20-002-3995
Mounting Bracket

200023995
130014DE203-1: RNCC: 3 | RNVC: 2
130014DE203: RNCC: D | RNVC: 9

13 Dec 2005

5340-21-868-9843
Butt Hinge

218689843
7558-14: RNCC: 3 | RNVC: 2
510NX3-8: RNCC: 3 | RNVC: 2
5340-5378: RNCC: 6 | RNVC: 9

11 Dec 1974

5340-21-863-3541

5340-21-891-5843
Butt Hinge

218915843
1595-1-1/2X1-1/4IN: RNCC: 3 | RNVC: 2

20 Feb 1983

5340-20-005-0088
Locking Bolt

200050088
0677692-1: RNCC: 3 | RNVC: 2

13 Aug 2009

5340-21-868-9169
Electrical-Mechanical Equipment Post

218689169
8060002775-1: RNCC: 3 | RNVC: 2

6 Mar 1974

5340-21-901-8680
Nonmetallic Bumper

219018680
8003516: RNCC: 3 | RNVC: 2

10 Jul 1987

5340-21-660-1199
Screw Hook

216601199
1184-1IN: RNCC: 3 | RNVC: 2
131-8930: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-660-0534
Hinged Hasp

216600534
915C2HB86: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-882-8921
Angle Bracket

218828921
AP607630: RNCC: 3 | RNVC: 2

15 Oct 1980

5340-20-004-8116
Retaining Strap

200048116
0677595-1: RNCC: 3 | RNVC: 2

12 May 2009

5340-21-814-8135
Flush Catch

218148135
295300: RNCC: 3 | RNVC: 2

18 Jun 1970

5340-21-913-0076
Mounting Plate

219130076
9276091-1: RNCC: 3 | RNVC: 2

1 Mar 1996

5340-21-882-8044
Butt Hinge

218828044
6075XC: RNCC: 3 | RNVC: 2

30 Apr 1980

5340-21-878-0510
Strap Hinge

218780510
03X7: RNCC: 3 | RNVC: 2
1-0199: RNCC: 5 | RNVC: 2

21 Feb 1978

5340-21-888-7616
Bail Handle

218887616
1205C2G3 1/2: RNCC: 3 | RNVC: 2
1205C2G-3-1-2: RNCC: 3 | RNVC: 2
1205C2G3 1/2: RNCC: 3 | RNVC: 2
1205C2G-3-1-2: RNCC: 3 | RNVC: 2

21 Mar 1982

5340-21-908-4741
Angle Bracket

219084741
EOEX: RNCC: 3 | RNVC: 2

4 Nov 1992