What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Latch Set?

A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Glide?

A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

Hardware, Commercial - Canada (CA)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Canada (CA) - NCB is 20 or 21

Page 17 of 64

NSN Format for Hardware, Commercial
Codified by Canada

53	40	21	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Canada (CA)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 190 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 63 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 26 Items
What is a Rod End Connector? 44 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 69 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 226 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 94 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 20 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 582 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 43 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 202 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 65 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Shelf Bracket? 33 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Door Hook And Eye? 22 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 77 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 12 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 23 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 23 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 44 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 13 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is a Friction Catch? 38 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 15 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 39 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 26 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 86 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 20 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorstop? 42 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Mortise Lock Set? 91 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 57 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 49 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Rope Cleat? 25 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 163 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 101 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 21 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 16 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 288 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 52 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 23 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 131 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 24 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Screw Hook? 41 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 70 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 45 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 210 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 163 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 82 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 44 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 38 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 25 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 20 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 42 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 18 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Glazier Point? 10 Items: A Glazier Point (POINT,GLAZIER) is a piece of thin sheet metal, triangular or diamond shaped, designed to hold a pane of glass in a wooden sash.
What is an Angle Bracket? 1105 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 81 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 10 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 32 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1130 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 20 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 49 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 37 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Quick Release Plunger? 13 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 114 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Flush Catch? 97 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 13 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 86 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 115 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 177 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 24 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 53 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 219 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 40 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 494 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 353 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 55 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 51 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 12 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 601 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 32 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 39 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 34 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 41 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 21 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping? 19 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 93 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 117 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 31 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 45 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 19 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 832 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 35 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 40 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 75 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 106 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Picture Hanger? 10 Items: A Picture Hanger (HANGER,PICTURE) is a hook like device that is secured to walls, bulkheads, columns and the like, by means of a nail, screw, magnet or adhesive backed cloth, that is included with and/or attached to the hook. It is designed to hold and suspend variuos items such as photographs, paintings, maps, documents, etc.
What is a Protection Bellows? 16 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 17 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 57 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 49 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 2535 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 19 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 16 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 1222 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 48 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 64 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Threaded Hinged Standoff? 11 Items: A Threaded Hinged Standoff (STANDOFF,HINGED,THREADED) is a standoff, internally and/or externally, threaded on both ends with a hinge or pivot point to allow for independent movement of the ends.
What is a Spacing Threaded Standoff? 178 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 115 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a Crank Handle? 13 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 29 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Mechanic Equipment Hardware Kit? 87 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Dust And Moisture Seal Protective Cover? 38 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 51 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 308 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 41 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 39 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Blank? 178 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 27 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 80 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 34 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Bumper? 86 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 17 of 64

5340-21-905-5068
Bow Handle

219055068
301B: RNCC: 3 | RNVC: 2
CPF-000-065: RNCC: 5 | RNVC: 1

25 Jun 1988

5340-21-908-0627
Filler Opening Cap

219080627
991 00 53 0112: RNCC: 3 | RNVC: 2

2 Mar 1991

5340-21-888-8023
Electrical-Mechanical Equipment Post

218888023
1260-3050: RNCC: 3 | RNVC: 2

3 Apr 1982

5340-20-005-5816
Mounting Bracket

200055816
AC40316-06: RNCC: 3 | RNVC: 2

17 May 2010

5340-21-914-1601
Rubber Bumper

219141601
RB9: RNCC: 3 | RNVC: 2

13 Jun 1997

5340-21-891-6854
Retaining Strap

218916854
359847: RNCC: 3 | RNVC: 2

18 Jun 1983

5340-20-004-8354
Sensor Pole

200048354
0777047-1: RNCC: 3 | RNVC: 2
0777047: RNCC: 5 | RNVC: 1

25 May 2009

5340-20-007-2509
Mounting Plate

200072509
0976485-1: RNCC: 3 | RNVC: 2
0976485: RNCC: D | RNVC: 9

7 Nov 2012

5340-20-004-5987
Mounting Bracket

200045987
300323-001: RNCC: 3 | RNVC: 2
300323: RNCC: 5 | RNVC: 1

23 Feb 2009

5340-21-913-2849
Mounting Bracket

219132849
10557693: RNCC: 3 | RNVC: 2

1 Sep 1996

5340-20-005-0001
Mounting Plate

200050001
10673753-001PW: RNCC: 3 | RNVC: 2
10673753: RNCC: D | RNVC: 9

4 Aug 2009

5340-21-311-9575
Retaining Band

213119575
J-800-62: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-002-4995
Sn Housing Assembly

200024995
HXV-398: RNCC: 3 | RNVC: 2

7 Feb 2006

5340-21-863-3523
Butt Hinge

218633523
804BP: RNCC: 3 | RNVC: 1
804BP-4 1/2 IN: RNCC: 3 | RNVC: 2
131-7860: RNCC: 6 | RNVC: 9

18 Nov 1971

5340-21-908-4097
Webbing Strap

219084097
8878051-1: RNCC: 3 | RNVC: 2

6 May 1992

5340-20-007-6496
Mounting Plate

200076496
CSP380-4: RNCC: 3 | RNVC: 2

14 May 2013

5340-21-879-5834

5340-21-912-3295

5340-20-000-9006
Filler Opening Cap

200009006
200H-0100-0: RNCC: 3 | RNVC: 2

18 Jul 2003

5340-21-911-9684
General Purpose Resilient Mount

219119684
316-031: RNCC: 3 | RNVC: 2

25 Nov 1994

5340-20-006-0217
Mounting Bracket

200060217
0656-034942-12: RNCC: 3 | RNVC: 2

22 Dec 2010

5340-21-905-5099
Access Cover

219055099
3-100822: RNCC: 3 | RNVC: 2
B4899-001: RNCC: 5 | RNVC: 2

23 Jul 1988

5340-21-896-0392
Dust And Moisture Seal Boot

218960392
40-018-1: RNCC: 3 | RNVC: 2

19 Mar 1984

5340-20-003-8978
Mounting Bracket

200038978
10663379-011PG: RNCC: 3 | RNVC: 2

11 Feb 2008

5340-20-005-1952
Access Cover

200051952
10670530-011PEG: RNCC: 3 | RNVC: 2

3 Dec 2009

5340-20-008-1539
Mounting Bracket

200081539
10713073-011PEG: RNCC: 3 | RNVC: 2
10713073: RNCC: D | RNVC: 9

3 Dec 2013

5340-20-004-3222
Handle

200043222
TE10008152-001: RNCC: 3 | RNVC: 2
3887001550: RNCC: 5 | RNVC: 2

30 Sep 2008

5340-21-893-7896
Angle Bracket

218937896
11647335-1: RNCC: 3 | RNVC: 2
11647335-1: RNCC: 8 | RNVC: 1

7 Aug 1983

5340-20-000-2193
Mounting Bracket

200002193
9379476-1: RNCC: 3 | RNVC: 2

13 Jun 2002

5340-21-868-9511
Rim Lock Set

218689511
0666 7-8: RNCC: 3 | RNVC: 1
5340-5330: RNCC: 6 | RNVC: 9

20 Aug 1974

5340-20-003-5876
Mounting Bracket

200035876
0577077-1: RNCC: 3 | RNVC: 2

25 Sep 2007

5340-21-660-2279

5340-21-660-0486

5340-21-660-2277

5340-20-003-5069
Post

200035069
718-352984-000: RNCC: 3 | RNVC: 2

2 Aug 2007

5340-20-003-3919
Locking Ring

200033919
1101-109: RNCC: 3 | RNVC: 2

11 Jun 2007

5340-20-005-7175
Mechanic Equipment Hardware Kit

200057175
1SI0183-10: RNCC: 3 | RNVC: 2

7 Jul 2010

5340-21-908-3991
Rod End Clevis

219083991
704-133300-903-2: RNCC: 3 | RNVC: 2

27 May 1992

5340-21-073-0790
Turnbuckle

210730790
90T2-1: RNCC: 3 | RNVC: 2

25 May 1968

5340-21-908-3462
Mounting Bracket

219083462
8762117-1: RNCC: 3 | RNVC: 2

8 Nov 1991

5340-21-866-2783
Nonmetallic Bumper

218662783
C9187-6: RNCC: 3 | RNVC: 2

19 May 1972

5340-20-002-2138
Wear Pad

200022138
9977507-1: RNCC: 3 | RNVC: 2

22 Aug 2005

5340-21-846-1013
Turnbuckle Body

218461013
6-75104-5: RNCC: 3 | RNVC: 2

19 Apr 1967

5340-21-914-3670
Retaining Strap

219143670
27H0590-31-003: RNCC: 3 | RNVC: 2
10618730: RNCC: 7 | RNVC: 2

12 Sep 1997

5340-20-007-9568
Mounting Bracket

200079568
10696369-011PEG: RNCC: 3 | RNVC: 2
10696369: RNCC: D | RNVC: 9

27 Sep 2013

5340-20-007-0514
Mounting Bracket

200070514
0678206: RNCC: 3 | RNVC: 2

27 Jul 2012

5340-21-866-4190
Push Door Plate

218664190
SE6690DB: RNCC: 3 | RNVC: 2
200-10-235: RNCC: 6 | RNVC: 9

19 May 1972

5340-20-005-1714
Spacing Threaded Standoff

200051714
10663661-001PG: RNCC: 3 | RNVC: 2

20 Nov 2009

5340-21-898-4918
Mortise Lock Set

218984918
D53PD-TUL-626: RNCC: 3 | RNVC: 2

16 Oct 1985

5340-21-868-9071
Door Closer Hinge

218689071
N0. 20: RNCC: 3 | RNVC: 2
5340-5126: RNCC: 6 | RNVC: 9

31 Dec 1973

5340-21-863-3513
Turnbuckle

218633513
303: RNCC: 3 | RNVC: 1
50-15: RNCC: 3 | RNVC: 2
185-6812: RNCC: 6 | RNVC: 9

18 Nov 1971

5340-20-007-5749
Mechanical Stop

200075749
83260044-101: RNCC: 3 | RNVC: 2

10 Apr 2013

5340-21-846-1427

5340-21-846-1586

5340-21-846-1585

5340-20-003-4780
Sub-Assembly Arm

200034780
10664246-011: RNCC: 3 | RNVC: 2
10664246: RNCC: 5 | RNVC: 1

24 Jul 2007

5340-20-008-0063
Pipe Hanger

200080063
CI-1516: RNCC: 3 | RNVC: 2

15 Oct 2013

5340-21-908-4287
Access Door Hinge

219084287
215-33159-8: RNCC: 3 | RNVC: 2

27 May 1992

5340-20-004-5594
Strap Assembly Reta

200045594
0669-045159-01: RNCC: 3 | RNVC: 2

11 Feb 2009

5340-21-866-9287
Door Handle

218669287
0-0: RNCC: 3 | RNVC: 1

14 Jul 1972

5340-20-006-1405
Luggage Handle

200061405
0000-019585-16: RNCC: 3 | RNVC: 2
0656-035429-01: RNCC: D | RNVC: 9

2 Mar 2011

5340-20-005-5810
Mounting Bracket

200055810
AC40316-03: RNCC: 3 | RNVC: 2

17 May 2010

5340-20-005-1694
Door Handle

200051694
10672447-001PW: RNCC: 3 | RNVC: 2

19 Nov 2009

5340-21-311-9548
Retaining Band

213119548
J800-22: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-898-4087
Angle Bracket

218984087
C5B111475-43: RNCC: 3 | RNVC: 2

6 Mar 1985

5340-20-006-3417
Bumper

200063417
85420069-103: RNCC: 3 | RNVC: 2

13 Jun 2011

5340-21-903-0814
Helical Compression Spring Seat

219030814
WW414038A: RNCC: 3 | RNVC: 2
WW414038: RNCC: 5 | RNVC: 2

19 Jan 1988

5340-21-874-3769
Retaining Strap

218743769
113: RNCC: 3 | RNVC: 2

8 Mar 1977

5340-20-006-1000
Multiple Angle Bracket

200061000
82510151-101: RNCC: 3 | RNVC: 2

8 Feb 2011

5340-20-002-1232
Shock Strut End Cap

200021232
21262-1: RNCC: 3 | RNVC: 2
21262: RNCC: D | RNVC: 9

15 Jun 2005

5340-21-908-4127
Flat Spring

219084127
704-184402-916-0: RNCC: 3 | RNVC: 2

17 Jun 1992

5340-21-866-9336
Loop Clamp

218669336
10658606-001: RNCC: 3 | RNVC: 2
C-949PC: RNCC: 5 | RNVC: 2

14 Jul 1972

5340-20-002-2432
Clamp

200022432
A20618-050-1: RNCC: 3 | RNVC: 2
A20618-050: RNCC: D | RNVC: 9

7 Sep 2005

5340-20-003-5168
Mounting Plate

200035168
10661434-001PW: RNCC: 3 | RNVC: 2
10661434: RNCC: 5 | RNVC: 1

9 Aug 2007

5340-20-004-6025
Mounting Bracket

200046025
301027-001: RNCC: 3 | RNVC: 2
301027: RNCC: 5 | RNVC: 1

24 Feb 2009

5340-20-003-5393
Hinge

200035393
10640060-PG: RNCC: 3 | RNVC: 2
10640060: RNCC: 5 | RNVC: 1

23 Aug 2007

5340-20-006-9579
Mounting Bracket

200069579
24-1235: RNCC: 3 | RNVC: 2

13 Jun 2012

5340-20-005-0058
Access Cover

200050058
TE20017461-100: RNCC: 3 | RNVC: 2
TE20017461: RNCC: 5 | RNVC: 1

12 Aug 2009

5340-20-005-1157
Angle Bracket

200051157
543008-1: RNCC: 3 | RNVC: 2

19 Oct 2009

5340-21-311-9439
Retaining Strap

213119439
J863-15: RNCC: 3 | RNVC: 1

6 Jun 1968

5340-20-000-0240
Angle Bracket

200000240
10626704: RNCC: 3 | RNVC: 2

12 Apr 2002

5340-20-006-8785
Dust And Moisture Seal Protective Cover

200068785
10505328: RNCC: 3 | RNVC: 2

4 May 2012

5340-20-008-1354
Mounting Bracket

200081354
10709183-011PEW: RNCC: 3 | RNVC: 2
10709183: RNCC: D | RNVC: 9

26 Nov 2013

5340-20-010-5119

5340-20-011-4429

5340-20-002-9220
Mounting Bracket

200029220
10651869-011PT: RNCC: 3 | RNVC: 2
10658670-FIND NO.-1: RNCC: 5 | RNVC: 2

8 Sep 2006

5340-20-007-6062
Mounting Bracket

200076062
10709161-001PEW: RNCC: 3 | RNVC: 2
10709161: RNCC: D | RNVC: 9

24 Apr 2013

5340-21-852-6764

5340-21-855-4940
Retaining Strap

218554940
1788392: RNCC: 3 | RNVC: 2

18 Nov 1969

5340-21-862-6589
Casement Fastener

218626589
7020-3: RNCC: 3 | RNVC: 1
T1829: RNCC: 3 | RNVC: 1
7020-3: RNCC: 3 | RNVC: 1
1441: RNCC: 3 | RNVC: 1
T1829: RNCC: 3 | RNVC: 1
SBT1416: RNCC: 3 | RNVC: 1
86: RNCC: 3 | RNVC: 2
257: RNCC: 3 | RNVC: 2
7273: RNCC: 3 | RNVC: 2
131-0402: RNCC: 6 | RNVC: 9

14 Oct 1971

5340-20-002-2773
Mounting Bracket

200022773
200-1375-101: RNCC: 3 | RNVC: 2
200-1375: RNCC: D | RNVC: 9

26 Sep 2005

5340-20-003-3904
Mounting Plate

200033904
B60307-011-1: RNCC: 3 | RNVC: 2

11 Jun 2007

5340-21-920-1247
Clamp.

219201247
9228214: RNCC: 3 | RNVC: 2
9228214-1: RNCC: 5 | RNVC: 2

14 May 1999

5340-21-660-1857
Turnbuckle

216601857
301: RNCC: 3 | RNVC: 1
301X1/2-12: RNCC: 3 | RNVC: 2
185-6918: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-910-8684
Angle Bracket

219108684
TE30004932-003: RNCC: 3 | RNVC: 2

18 Jun 1993

5340-21-804-6777
Plug

218046777
626595: RNCC: 3 | RNVC: 2
1604-78: RNCC: 3 | RNVC: 2
323-54A: RNCC: 3 | RNVC: 2

5 Sep 1963

5340-20-006-6211
Antipilferage Seal

200066211
381498FIG10CA/04: RNCC: 3 | RNVC: 2

6 Dec 2011

5340-21-908-3555
Strap Fastener Loop

219083555
SKL-9335: RNCC: 3 | RNVC: 2

11 Dec 1991

5340-20-007-6721
Mounting Bracket

200076721
10703380-011PW: RNCC: 3 | RNVC: 2
10703380: RNCC: D | RNVC: 9

27 May 2013

5340-21-888-1647

5340-21-110-0720
Turnbuckle

211100720
E0000091: RNCC: 3 | RNVC: 2
MEXE8010: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-910-8791
Dust And Moisture Seal Boot

219108791
9277686-1: RNCC: 3 | RNVC: 2
FK174173-1: RNCC: 5 | RNVC: 2
9277686: RNCC: 6 | RNVC: 9

3 Sep 1993

5340-21-908-0518
Mounting Plate

219080518
SKL-9169: RNCC: 3 | RNVC: 2

18 Jan 1991

5340-20-003-2758
Mounting Bracket

200032758
10669752: RNCC: 3 | RNVC: 2

20 Mar 2007

5340-21-914-4777
Buckle

219144777
9278222-1: RNCC: 3 | RNVC: 2
LS00689-1: RNCC: 5 | RNVC: 2

5 Dec 1997

5340-20-001-8050
Nonmetallic Bumper

200018050
315-632: RNCC: 3 | RNVC: 2

5 Jan 2005

5340-21-912-6719
Nonmetallic Bumper

219126719
9278103-1: RNCC: 3 | RNVC: 2
FK148800: RNCC: 5 | RNVC: 2

3 Aug 1995

5340-20-000-2302
Angle Bracket

200002302
9379243-1: RNCC: 3 | RNVC: 2

18 Jun 2002

5340-20-000-5126
Webbing Strap

200005126
10638455-60: RNCC: 3 | RNVC: 2

21 Nov 2002

5340-20-006-9509
Dust And Moisture Seal Protective Cover

200069509
10685517-011PEG: RNCC: 3 | RNVC: 2

12 Jun 2012

5340-21-896-2665
Electrical-Mechanical Equipment Post

218962665
972940: RNCC: 3 | RNVC: 2
16-05-08: RNCC: 5 | RNVC: 2

5 Aug 1984

5340-21-805-3214

5340-21-921-5103
Screw Link

219215103
557013: RNCC: 3 | RNVC: 2

18 Dec 2001

5340-21-908-4293
Bail Handle

219084293
TE10001893-002: RNCC: 3 | RNVC: 2

17 Apr 1992

5340-21-920-0412
Left Head Slide

219200412
10618395-2: RNCC: 3 | RNVC: 2

20 Mar 1999

5340-20-004-6053
Cushioning Pad

200046053
305613-001: RNCC: 3 | RNVC: 2
305613: RNCC: 5 | RNVC: 1

24 Feb 2009

5340-21-814-0101

5340-21-660-2057

5340-21-813-4110

5340-20-001-2244
Access Cover

200012244
GD421-7900-1: RNCC: 3 | RNVC: 2

21 Jan 2004

5340-20-005-2694
Mounting Plate

200052694
10673144-001PG: RNCC: 3 | RNVC: 2

21 Jan 2010

5340-21-879-5380
Pipe Bracket

218795380
34-16885: RNCC: 3 | RNVC: 1
2M: RNCC: 3 | RNVC: 1
237: RNCC: 3 | RNVC: 1
2: RNCC: 5 | RNVC: 1

26 Sep 1978

5340-21-921-4457
Double Angle Bracket

219214457
A22200-0060-1: RNCC: 3 | RNVC: 2

13 Nov 2001

5340-20-005-4106
Access Cover

200054106
M122217: RNCC: 3 | RNVC: 2

26 Mar 2010

5340-20-000-3846
Mounting Bracket

200003846
10656420-011PW: RNCC: 3 | RNVC: 2

6 Sep 2002

5340-21-855-0032
Corrosion Preventive Anode

218550032
505-65006: RNCC: 3 | RNVC: 2

23 Jul 1969

5340-20-000-9380
Mounting Bracket

200009380
10642522-PEW: RNCC: 3 | RNVC: 2

8 Aug 2003

5340-21-904-9783
Spring Loaded Cylinder Fastener

219049783
CF 429 750 A: RNCC: 3 | RNVC: 2

16 Jun 1989

5340-21-905-5753
Access Cover

219055753
100436-1: RNCC: 3 | RNVC: 2

11 Oct 1989

5340-20-006-0430
Loop Clamp

200060430
VCL-175: RNCC: 3 | RNVC: 2
10685100: RNCC: 7 | RNVC: 2

7 Jan 2011

5340-20-007-7353
Mounting Bracket

200077353
10703600-011PEW: RNCC: 3 | RNVC: 2
10703600: RNCC: D | RNVC: 9

27 Jun 2013

5340-20-003-8222
Battery Clamp

200038222
6430-1120-00: RNCC: 3 | RNVC: 2

7 Jan 2008

5340-21-913-0744
Angle Bracket

219130744
9481438: RNCC: 3 | RNVC: 2

15 Mar 1996

5340-21-920-6840
Mounting Bracket

219206840
10603946: RNCC: 3 | RNVC: 2

12 Jun 2000

5340-20-007-9216
Mounting Bracket

200079216
4122989: RNCC: 3 | RNVC: 2

16 Sep 2013

5340-21-857-7960
Picture Hanger

218577960
PH150: RNCC: 3 | RNVC: 2

12 Feb 1970

5340-21-853-5023

5340-21-853-8087

5340-21-853-5011

5340-20-000-8917
Access Cover

200008917
356H-0024-0: RNCC: 3 | RNVC: 2

11 Jul 2003

5340-21-858-1499
Headless Straight Rod

218581499
15BMF70-36INITEM4: RNCC: 3 | RNVC: 2
36IN15BMF70-4: RNCC: 3 | RNVC: 2

13 Jan 1972

5340-21-895-0210
Expansion Plug

218950210
260-030: RNCC: 3 | RNVC: 2
FP26: RNCC: 3 | RNVC: 2

28 Jan 1984

5340-21-891-6722
Elbow

218916722
313: RNCC: 3 | RNVC: 2

11 Jun 1983

5340-21-660-1822
Retaining Strap

216601822
1211: RNCC: 3 | RNVC: 2

25 May 1968

5340-21-908-3593
Mounting Bracket

219083593
CF472793B: RNCC: 3 | RNVC: 2

18 Dec 1991

5340-21-901-8296
Door Closer

219018296
4115H-LH: RNCC: 3 | RNVC: 2

22 Sep 1986

5340-21-473-0259

5340-21-812-6381

5340-21-908-4836
Key Blank

219084836
DA-05053-12: RNCC: 3 | RNVC: 2

24 Oct 1992

5340-21-910-8581
Detent Plunger

219108581
MT5001-30-165: RNCC: 3 | RNVC: 2

30 Apr 1993

5340-21-900-1464
Angle Bracket

219001464
3105022-01: RNCC: 3 | RNVC: 2

31 Jan 1986

5340-21-891-5881
Corrosion Preventive Anode

218915881
67-322PK: RNCC: 3 | RNVC: 2

12 Feb 1983

5340-20-000-1425
Mounting Bracket

200001425
10656382-001PEW: RNCC: 3 | RNVC: 2

13 May 2002

5340-21-806-9458

5340-20-003-1309
Access Cover

200031309
10665027-011: RNCC: 3 | RNVC: 2

8 Jan 2007

5340-20-005-6973
Mounting Bracket

200056973
10683152-011PW: RNCC: 3 | RNVC: 2

23 Jun 2010

5340-20-002-5914
Mounting Bracket

200025914
10663257-011: RNCC: 3 | RNVC: 2

22 Mar 2006

5340-21-816-3002
Mount

218163002
941302-17: RNCC: 3 | RNVC: 2
7172063: RNCC: 5 | RNVC: 2

14 Jul 1964

5340-21-886-2501
Split Tubular Clip

218862501
702-352149-001: RNCC: 3 | RNVC: 2
352-149-001: RNCC: 5 | RNVC: 2

4 Aug 1981

5340-21-874-2772
Loop Clamp

218742772
2990-0006: RNCC: 3 | RNVC: 2

1 Dec 1976

5340-21-870-9763

5340-21-853-7137

5340-21-852-8470

5340-21-912-6735
Spring Tension Clip

219126735
CF18574A: RNCC: 3 | RNVC: 2

3 Aug 1995

5340-21-914-6318
Seal Retaining Plate

219146318
3117230-02: RNCC: 3 | RNVC: 2

26 Apr 1999

5340-20-004-3636
Rail Extension

200043636
10672032-001: RNCC: 3 | RNVC: 2

22 Oct 2008

5340-20-000-2424
Webbing Strap

200002424
10656122-001: RNCC: 3 | RNVC: 2

25 Jun 2002

5340-20-000-4074
Access Cover

200004074
10656292-011PW: RNCC: 3 | RNVC: 2

19 Sep 2002

5340-21-913-6474
Pad Eye

219136474
8317205: RNCC: 3 | RNVC: 2

21 Jan 1997

5340-20-007-3208
Dust And Moisture Seal Protective Cap-Plug

200073208
0669-793143-10: RNCC: 3 | RNVC: 2

10 Dec 2012

5340-20-004-8428
Mounting Plate

200048428
10664278-001PW: RNCC: 3 | RNVC: 2
10664278: RNCC: 5 | RNVC: 1

28 May 2009

5340-21-920-1141
Angle Bracket

219201141
10617291: RNCC: 3 | RNVC: 2

11 May 1999

5340-21-855-4930

5340-21-842-8625

5340-20-007-8432
Mounting Plate

200078432
10708522-001PEG: RNCC: 3 | RNVC: 2
10708522: RNCC: D | RNVC: 9

6 Sep 2013

5340-20-007-5875
Mounting Bracket

200075875
10711077-011PEG: RNCC: 3 | RNVC: 2
10711077: RNCC: D | RNVC: 9

18 Apr 2013

5340-20-007-5050
Mounting Bracket

200075050
B30603-701-1: RNCC: 3 | RNVC: 2

5 Mar 2013

5340-21-846-8436
Antipilferage Seal

218468436
KT2961: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-005-2835
Angle Bracket

200052835
1204 7045: RNCC: 3 | RNVC: 2

29 Jan 2010

5340-21-921-4570
Webbing Strap

219214570
10625159: RNCC: 3 | RNVC: 2
10625159: RNCC: 7 | RNVC: 2

20 Nov 2001

5340-21-860-6871
Deflector Locki Rod

218606871
T3009: RNCC: 3 | RNVC: 2
P901292: RNCC: 5 | RNVC: 2
901292: RNCC: 6 | RNVC: 9

17 Dec 1970

5340-21-660-0866
Bow Handle

216600866
TO3396: RNCC: 3 | RNVC: 2
132-2795: RNCC: 6 | RNVC: 9

30 Nov 1965

5340-21-804-8736

5340-21-804-2371

5340-21-809-4830

5340-20-007-5902
Mounting Bracket

200075902
10708116-011PEW: RNCC: 3 | RNVC: 2
10708116: RNCC: D | RNVC: 9

19 Apr 2013

5340-21-862-6119
Rim Latch

218626119
R996R3: RNCC: 3 | RNVC: 2
69GP7: RNCC: 4 | RNVC: 1

15 Jul 1971

5340-20-003-0308
General Purpose Resilient Mount

200030308
314-055: RNCC: 3 | RNVC: 2

21 Nov 2006

5340-20-001-2200
Manual Control Handle

200012200
2047-0014: RNCC: 3 | RNVC: 2

21 Jan 2004

5340-21-908-4102
Access Door

219084102
215-51035-32: RNCC: 3 | RNVC: 2

6 Jun 1992

5340-21-897-8334
Retaining Strap

218978334
STRAP1-1/4IN: RNCC: 3 | RNVC: 2

18 Dec 1984

5340-20-007-9530
Rim Latch

200079530
10698210-011PG: RNCC: 3 | RNVC: 2
10698210: RNCC: D | RNVC: 9

26 Sep 2013

5340-20-007-9211
Mounting Bracket

200079211
10687378-001PG: RNCC: 3 | RNVC: 2
10687378: RNCC: D | RNVC: 9

16 Sep 2013

5340-20-005-5842
Bumper

200055842
AC2110: RNCC: 3 | RNVC: 2
10716-03830: RNCC: 5 | RNVC: 2

17 May 2010

5340-20-005-3915
Mounting Bracket

200053915
0976034-1: RNCC: 3 | RNVC: 2

16 Mar 2010

5340-20-005-2050
Bumper

200052050
215T28056-6: RNCC: 3 | RNVC: 2

9 Dec 2009

5340-21-905-5445
Mounting Bracket

219055445
3283140-1: RNCC: 3 | RNVC: 2

9 Mar 1989

5340-21-913-2946
Nonmetallic Bumper

219132946
10556577: RNCC: 3 | RNVC: 2

22 Sep 1996

5340-21-913-2994
Access Cover

219132994
10625484: RNCC: 3 | RNVC: 2

18 Oct 1996

5340-21-913-3008
Detent Plunger

219133008
10556643: RNCC: 3 | RNVC: 2

1 Nov 1996

5340-21-913-4826
Access Cover

219134826
10558464: RNCC: 3 | RNVC: 2

23 Oct 1996

5340-21-913-4858
Catch Strike

219134858
10557277: RNCC: 3 | RNVC: 2

8 Dec 1996

5340-21-913-6506
Mounting Bracket

219136506
10557958: RNCC: 3 | RNVC: 2

13 Feb 1997

5340-21-913-6510
Mounting Bracket

219136510
10608096: RNCC: 3 | RNVC: 2

13 Feb 1997

5340-21-914-2154
Mounting Bracket

219142154
10501073-PT: RNCC: 3 | RNVC: 2

23 Jul 1997

5340-21-914-2672
Mounting Plate

219142672
10504542-PT: RNCC: 3 | RNVC: 2

29 Oct 1997

5340-20-009-3583

5340-20-010-4215

5340-20-008-6848

5340-21-491-0169
General Purpose Resilient Mount

214910169
K4430626: RNCC: 3 | RNVC: 2

30 Nov 1965

5340-21-103-4543

5340-21-102-4188

5340-21-102-7509

5340-21-884-0320
Flush Bolt

218840320
2846-12C3: RNCC: 3 | RNVC: 2

24 Dec 1980

5340-21-880-7268
Swivel Caster

218807268
S-HS-6V: RNCC: 3 | RNVC: 2
MWK679-16ITEMS10AND17: RNCC: 6 | RNVC: 9

7 Aug 1979

5340-21-910-8879
General Purpose Resilient Mount

219108879
PS135020-01: RNCC: 3 | RNVC: 2
E22-02-60: RNCC: 5 | RNVC: 9

24 Aug 1993

5340-21-908-4055
Access Door

219084055
TE20000850-300: RNCC: 3 | RNVC: 2

17 Apr 1992

5340-20-001-5350
Retaining Clamp

200015350
DE-4499-1: RNCC: 3 | RNVC: 2

14 Jul 2004

5340-21-908-0863
Door Handle

219080863
9265212: RNCC: 3 | RNVC: 2
51154: RNCC: 3 | RNVC: 2

21 Jun 1991

5340-21-905-9435
Dust And Moisture Seal Boot

219059435
LM700-38: RNCC: 3 | RNVC: 2

14 Jan 1989

5340-21-908-4148
Mechanical Stop

219084148
CF 814 450 AE: RNCC: 3 | RNVC: 2
CF 814 451 AZ: RNCC: 6 | RNVC: 9

30 May 1992

5340-21-311-9417

5340-21-311-9006

5340-21-866-9671
Expansion Plug

218669671
0-0: RNCC: 3 | RNVC: 1

14 Jul 1972

5340-21-906-7489
Mounting Bracket

219067489
CF 349 746 A: RNCC: 3 | RNVC: 2

11 May 1989

5340-20-008-1362
Mounting Plate

200081362
10708186-011PEW: RNCC: 3 | RNVC: 2
10708186: RNCC: D | RNVC: 9

26 Nov 2013

5340-21-914-1975
Mounting Plate

219141975
1205-782-2: RNCC: 3 | RNVC: 2

8 Aug 1998

5340-20-007-0452
Mounting Bracket

200070452
10686531-011PEW: RNCC: 3 | RNVC: 2
10686531: RNCC: D | RNVC: 9

26 Jul 2012

5340-20-006-1917
Mounting Bracket

200061917
KT10672437-011: RNCC: 3 | RNVC: 2

22 Mar 2011

5340-21-841-8574

5340-21-820-2749
Butt Hinge

218202749
MS20257P3-3119: RNCC: 2 | RNVC: 2

30 Mar 1965

5340-20-005-5629
Double Angle Bracket

200055629
AC40366-02: RNCC: 3 | RNVC: 2

12 May 2010

5340-20-006-1690
Angle Bracket

200061690
82450046-001: RNCC: 3 | RNVC: 2

16 Mar 2011

5340-21-874-2758
Retaining Strap

218742758
1788414: RNCC: 3 | RNVC: 2

8 Dec 1976

5340-20-001-7144
Mounting Bracket

200017144
10617228: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-21-891-6709
Clamp

218916709
M5152-72: RNCC: 3 | RNVC: 2
56975.20.5.607M5152-72: RNCC: 5 | RNVC: 2

11 Jun 1983

5340-20-006-0288
Retaining Strap

200060288
82520979-001: RNCC: 3 | RNVC: 2

24 Dec 2010

5340-20-008-1335
Mounting Bracket

200081335
10710328-011PG: RNCC: 3 | RNVC: 2
10710328: RNCC: D | RNVC: 9

25 Nov 2013

5340-20-004-2311
Mechanical Stop

200042311
10668624-011: RNCC: 3 | RNVC: 2

30 Jul 2008

5340-21-906-5772
Launch Bottom Cover

219065772
10-03827-01: RNCC: 3 | RNVC: 2

12 Nov 1988

5340-21-913-1259
Rim Latch Set

219131259
099-160: RNCC: 3 | RNVC: 2

22 Sep 1996

5340-21-868-9220
Caster Wheel

218689220
1254-38B: RNCC: 3 | RNVC: 2
1-2-45: RNCC: 5 | RNVC: 2
5340-5268: RNCC: 6 | RNVC: 9

10 Apr 1974

5340-20-003-5679
Mounting Bracket

200035679
B22300-20-1: RNCC: 3 | RNVC: 2

10 Sep 2007

5340-20-006-7205
Retaining Strap

200067205
B51007-248-1: RNCC: 3 | RNVC: 2

7 Feb 2012

5340-21-108-8745
Retaining Strap

211088745
113828-1: RNCC: 3 | RNVC: 2
ZACAN0120: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-914-6062
Angle Bracket

219146062
8668038-1: RNCC: 3 | RNVC: 2

20 Mar 1998

5340-21-807-4378

5340-21-809-7178

5340-21-809-7300

5340-20-000-7396
Support. Bracket

200007396
0175801-1: RNCC: 3 | RNVC: 2
0175801: RNCC: D | RNVC: 9

28 Apr 2003

5340-21-865-9972
Bow Handle

218659972
T326-26: RNCC: 3 | RNVC: 2

19 May 1972

5340-21-877-3399
Expansion Plug

218773399
31550: RNCC: 3 | RNVC: 2

18 Oct 1977

5340-21-901-8759
Mounting Bracket

219018759
D011: RNCC: 3 | RNVC: 2

4 Nov 1987

5340-21-896-9543
Door Latch

218969543
44056: RNCC: 3 | RNVC: 2

9 Sep 1984

5340-21-898-4351
Turnbuckle

218984351
5016: RNCC: 3 | RNVC: 2

24 May 1985

5340-21-330-8254
Threaded End Tensioning Tie Rod

213308254
120-18005: RNCC: 3 | RNVC: 2
09W0382: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-007-8900
Angle Bracket

200078900
10708801-001PEW: RNCC: 3 | RNVC: 2
10708801: RNCC: D | RNVC: 9

10 Sep 2013

5340-20-001-5174
Mounting Plate

200015174
10656407-011PW: RNCC: 3 | RNVC: 2
10656407: RNCC: D | RNVC: 9

30 Jun 2004

5340-21-866-9720
Loop Clamp

218669720
CLE3-16: RNCC: 3 | RNVC: 2
CLE3-16: RNCC: 3 | RNVC: 2

18 Aug 1972

5340-21-660-0300
Strap Hinge

216600300
209: RNCC: 3 | RNVC: 1
209-4: RNCC: 3 | RNVC: 2
131-8354: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-20-008-1361
Mounting Plate

200081361
10708173-011PEW: RNCC: 3 | RNVC: 2
10708173: RNCC: D | RNVC: 9

26 Nov 2013

5340-21-920-7334
Clip Retainer Plate

219207334
3043535-03: RNCC: 3 | RNVC: 2

8 Aug 2000

5340-21-898-4690
Expansion Shield

218984690
59270: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-20-005-2035
Retaining Strap

200052035
10667022-001PW: RNCC: 3 | RNVC: 2

9 Dec 2009

5340-20-005-8209
Mechanical Stop

200058209
85210272-006: RNCC: 3 | RNVC: 2

7 Sep 2010

5340-21-914-9861
Control Unit

219149861
A-7444: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-20-002-2258
Cable - Throttle

200022258
0075216-1: RNCC: 3 | RNVC: 2

25 Aug 2005

5340-20-002-4839
Mounting Bracket

200024839
3-790652: RNCC: 3 | RNVC: 2

31 Jan 2006

5340-20-002-6695
Wire Rope

200026695
MS20995F32: RNCC: 3 | RNVC: 2

5 May 2006

5340-21-893-8484
Support Hook

218938484
HDH-4B: RNCC: 3 | RNVC: 2
905273-006: RNCC: 7 | RNVC: 2

15 Oct 1983

5340-20-003-8986
Mounting Bracket

200038986
10663380-011PG: RNCC: 3 | RNVC: 2

11 Feb 2008

5340-20-007-6075
Mounting Bracket

200076075
10706765-011PEW: RNCC: 3 | RNVC: 2
10706765: RNCC: D | RNVC: 9

24 Apr 2013

5340-21-862-6113
Expansion Shield

218626113
101-01036: RNCC: 3 | RNVC: 2
101-843: RNCC: 3 | RNVC: 2
843: RNCC: 3 | RNVC: 2

15 Jul 1971

5340-20-007-0377
Turnbuckle

200070377
87800045-001: RNCC: 3 | RNVC: 2

24 Jul 2012

5340-21-901-8166
Hinge And Hasp

219018166
D88-D7429-D7431: RNCC: 3 | RNVC: 2

18 Jun 1986

5340-20-003-1125
Mounting Bracket

200031125
722488-001: RNCC: 3 | RNVC: 2

27 Dec 2006

5340-21-813-8904
Angle Bracket

218138904
7A482376: RNCC: 3 | RNVC: 2

13 Jun 1964

5340-21-913-0791
Door

219130791
SL435: RNCC: 3 | RNVC: 2

12 Apr 1996

5340-21-908-3143
Strap Fastener Loop

219083143
51837: RNCC: 3 | RNVC: 2

31 Jul 1991

5340-20-004-0470
Mounting Plate

200040470
0377355-1: RNCC: 3 | RNVC: 2

22 Apr 2008

5340-21-913-1759
Loop Clamp

219131759
MS21104C9: RNCC: 2 | RNVC: 2

4 Feb 1997

5340-20-003-8224
Connector Cover

200038224
6430-1030-00: RNCC: 3 | RNVC: 2

7 Jan 2008

5340-20-003-5608
Mounting Bracket

200035608
10664506-011PW: RNCC: 3 | RNVC: 2
10664506: RNCC: 5 | RNVC: 1

5 Sep 2007

5340-21-911-1500
Nonmetallic Bumper

219111500
SJ-5003 021200 184260: RNCC: 3 | RNVC: 2

10 Mar 1994

5340-21-908-3959
Pawl Fastener

219083959
31333-HS: RNCC: 3 | RNVC: 2
CPF-161-023: RNCC: 5 | RNVC: 9

11 Mar 1992

5340-20-003-0570
Access Cover

200030570
C91001-260-1: RNCC: 3 | RNVC: 2

30 Nov 2006

5340-21-910-8906
General Purpose Resilient Mount

219108906
NDVIBRA TYPE M100: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-21-908-4025
Strap Hinge Leaf

219084025
215-30092: RNCC: 3 | RNVC: 2

8 May 1992

5340-20-002-7969
Cover

200027969
C50703-211-1: RNCC: 3 | RNVC: 2

20 Jun 2006

5340-21-905-5633
Mounting Bracket

219055633
704-136113-001-0: RNCC: 3 | RNVC: 2

22 Jul 1989

5340-20-003-7580
Mounting Plate

200037580
541893-1: RNCC: 3 | RNVC: 2
541893: RNCC: 5 | RNVC: 1

30 Nov 2007

5340-20-005-5755
Multiple Angle Bracket

200055755
AC40368-03: RNCC: 3 | RNVC: 2

14 May 2010

5340-21-896-2209
Angle Bracket

218962209
N5/68/106: RNCC: 3 | RNVC: 2

10 Jun 1984

5340-20-002-1678
Mounting Bracket

200021678
10657142-011: RNCC: 3 | RNVC: 2
10657142: RNCC: D | RNVC: 9

15 Jul 2005

5340-21-814-0799

5340-21-814-1926

5340-21-866-9174

5340-21-912-3166
Mounting Plate

219123166
626-601399-001: RNCC: 3 | RNVC: 2

25 Jan 1995

5340-20-003-5262
Mounting Bracket

200035262
10664301-001PW: RNCC: 3 | RNVC: 2

14 Aug 2007

5340-21-868-8254
Grooved Clamp Coupling

218688254
4459-2046M: RNCC: 3 | RNVC: 2

15 Feb 1973

5340-21-908-0707
Bridge Clamp

219080707
-99-974-119: RNCC: 3 | RNVC: 2

18 Apr 1991

5340-20-001-0974
Angle Bracket

200010974
10658689-001PEW: RNCC: 3 | RNVC: 2

31 Oct 2003

5340-21-114-7294

5340-20-001-2993
Mounting Bracket

200012993
0376140-1: RNCC: 3 | RNVC: 2
0376140: RNCC: D | RNVC: 9

10 Mar 2004

5340-20-007-6987
Butt Hinge

200076987
0577054-1: RNCC: 3 | RNVC: 2
0577054: RNCC: D | RNVC: 9

11 Jun 2013

5340-21-884-0062
Electrical-Mechanical Equipment Post

218840062
46-54415-100: RNCC: 3 | RNVC: 2

13 Nov 1980

5340-20-006-4585
Mounting Plate

200064585
B51007-166-1: RNCC: 3 | RNVC: 2

10 Aug 2011

5340-21-908-0803
Flush Catch

219080803
4907: RNCC: 3 | RNVC: 2
099-025: RNCC: 5 | RNVC: 2
099-252: RNCC: 5 | RNVC: 2

1 Jun 1991

5340-20-006-7477
Mounting Plate

200067477
0677860-1: RNCC: 3 | RNVC: 2

22 Feb 2012

5340-21-886-2640
Sliding D Track Set

218862640
305H: RNCC: 3 | RNVC: 1
307B: RNCC: 3 | RNVC: 1

11 Aug 1981

5340-21-898-4670
Webbing Strap

218984670
C1215-3-18000-40: RNCC: 3 | RNVC: 2

19 Aug 1985

5340-20-005-5507
Multiple Angle Bracket

200055507
AC40342-01: RNCC: 3 | RNVC: 2

10 May 2010

5340-20-006-6293
Mechanic Equipment Hardware Kit

200066293
AC19690-90: RNCC: 3 | RNVC: 2

13 Dec 2011

5340-20-005-5894
Mending Plate

200055894
AC40314-03: RNCC: 3 | RNVC: 2

18 May 2010

5340-21-311-9591
Retaining Band

213119591
J800-24ALUMINUM: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-912-5850
Mounting Bracket

219125850
72-324-01: RNCC: 3 | RNVC: 2

11 Jul 1995

5340-21-876-7874
Dust And Moisture Seal Boot

218767874
15851: RNCC: 3 | RNVC: 2
2530-0254: RNCC: 6 | RNVC: 9

30 Aug 1977

5340-21-000-6712

5340-21-843-6583

5340-21-660-0266
Butt Hinge

216600266
69GP1: RNCC: 2 | RNVC: 1
139A: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-21-898-4674
Electrical-Mechanical Equipment Post

218984674
CH11: RNCC: 3 | RNVC: 2
528414: RNCC: 3 | RNVC: 2

20 Aug 1985

5340-21-896-2799
Angle Bracket

218962799
027533504: RNCC: 3 | RNVC: 2

19 Aug 1984

5340-21-862-5144
Recess Handle

218625144
1610S: RNCC: 3 | RNVC: 1

13 May 1971

5340-20-006-4910
Drop Arm

200064910
1003486: RNCC: 3 | RNVC: 2
1003486: RNCC: 3 | RNVC: 9
20653: RNCC: 5 | RNVC: 9

7 Sep 2011

5340-21-660-0782
Bow Handle

216600782
S879: RNCC: 3 | RNVC: 2

6 Jun 1968

5340-20-006-5226
Webbing Strap

200065226
10607670-17: RNCC: 3 | RNVC: 2

5 Oct 2011

5340-21-847-1342
Angle Bracket

218471342
383267: RNCC: 3 | RNVC: 2

16 Jun 1972

5340-20-006-5407
Mounting Bracket

200065407
B51001-149-1: RNCC: 3 | RNVC: 2

13 Oct 2011

5340-21-891-6107
Bow Handle

218916107
415-2385-02-1800: RNCC: 3 | RNVC: 2
594-990026: RNCC: 5 | RNVC: 2

28 Feb 1983

5340-21-629-0950
General Purpose Resilient Mount

216290950
ARL30-1AND2: RNCC: 3 | RNVC: 2
AP2143: RNCC: 3 | RNVC: 2
AP0413-923-5853: RNCC: 3 | RNVC: 2
ARL30-1AND2: RNCC: 5 | RNVC: 2
CDAMENVSH1-0-8PART5PN8B7-25: RNCC: 5 | RNVC: 9
8B7-25: RNCC: 5 | RNVC: 9

6 Jun 1968

5340-21-841-7616
Butt Hinge

218417616
311C26-1 1/2 X 72: RNCC: 3 | RNVC: 2
311C26-1 1/2 X 72: RNCC: 3 | RNVC: 2
69GP1: RNCC: 4 | RNVC: 1
311CM: RNCC: 5 | RNVC: 2

6 Jun 1968

5340-21-108-5090
Butt Hinge

211085090
810: RNCC: 3 | RNVC: 1
810-1 1/2: RNCC: 3 | RNVC: 2
1G51350: RNCC: 6 | RNVC: 9

6 Jun 1968

5340-21-910-8832
Manual Control Handle

219108832
8961139.1: RNCC: 3 | RNVC: 2

22 Jul 1993

5340-20-006-0680
Mounting Bracket

200060680
34608-B: RNCC: 3 | RNVC: 2

24 Jan 2011

5340-20-003-8148
Tie Down Adapter

200038148
0078448-1: RNCC: 3 | RNVC: 2

3 Jan 2008

5340-21-879-5252
Door C Rod And Shoe

218795252
4010-79: RNCC: 3 | RNVC: 2

4 Jul 1978

Load More Results