What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is a Hasp Staple?

A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

Hardware, Commercial - Australia (AU)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Australia (AU) - NCB is 66

Page 7 of 29

NSN Format for Hardware, Commercial
Codified by Australia

53	40	66	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Australia (AU)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 53 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 78 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 109 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 25 Items
Holder,Spring 26 Items
What is a Compression Cup? 11 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 43 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 85 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 54 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 27 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 249 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 36 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 87 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 39 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 11 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 16 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 15 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Rim Latch? 18 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Rim Lock? 13 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 12 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 17 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 17 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 18 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 103 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 11 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 59 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 14 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 14 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Plug Button? 12 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Corrosion Preventive Anode? 27 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 78 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 268 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 88 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 70 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 36 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 40 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 41 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Plain Solid Disk? 41 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 12 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 608 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 57 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 54 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 317 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 48 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 40 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 83 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Quick Release Plunger? 17 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 65 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 24 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 14 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 22 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 49 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 19 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 151 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 15 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 444 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 128 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 42 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 53 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 25 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 201 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 33 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 133 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 42 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 54 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Strapping? 28 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 75 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Screw Thread Insert And Tool Assortment? 18 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 28 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 18 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 740 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 11 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 14 Items
What is an Antipilferage Seal? 27 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 129 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Seal Retaining Plate? 29 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 47 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1862 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 15 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 11 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 10 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 766 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 27 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 65 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 79 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 71 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 22 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 12 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 14 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 35 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 50 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 28 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 15 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 20 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 11 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 83 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 138 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 393 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 38 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 11 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 22 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
What is a Key Blank? 22 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 10 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 114 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 11 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 20 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 12 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is a Bumper? 74 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 7 of 29

5340-66-158-7999
Dust And Moisture Seal Protective Plug

661587999
DEF(AUST)8767: RNCC: 4 | RNVC: 1
4512 133 44611: RNCC: 5 | RNVC: 2

4 Aug 2010

5340-66-153-5661
Flap Hinge

661535661
C22417: RNCC: 3 | RNVC: 2
071203: RNCC: 5 | RNVC: 2
3130120 66X35MM NP: RNCC: 5 | RNVC: 2

14 Sep 2005

5340-66-154-8962
Mounting Bracket

661548962
15013604: RNCC: 3 | RNVC: 2

2 Oct 2006

5340-66-146-2894
Propeller Guard

661462894
BM581051: RNCC: 3 | RNVC: 2

27 Mar 2000

5340-66-154-3135
Dust And Moisture Seal Protective Cap-Plug

661543135
CP1072: RNCC: 3 | RNVC: 2
1154606: RNCC: 5 | RNVC: 2

21 Apr 2006

5340-66-160-9472
Angle Bracket

661609472
557.21.09.494: RNCC: 3 | RNVC: 2

20 Mar 2013

5340-66-094-5332
Blankoff Insert

660945332
1B3-50-105: RNCC: 3 | RNVC: 2

17 Apr 1977

5340-66-131-7394
Spring Tension Clip

661317394
571.10.09.410: RNCC: 3 | RNVC: 2

29 Nov 1988

5340-66-147-2577
Side Plate

661472577
DAG63P: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-66-137-2831
Dust And Moisture Seal Protective Plug

661372831
0110153000000D0: RNCC: 3 | RNVC: 2

30 Oct 1992

5340-66-085-3552
Resilient Mount Plate

660853552
3291209: RNCC: 3 | RNVC: 2

10 Jan 1995

5340-66-017-4096
Quick Release Catch

660174096
ADE(M)183-9: RNCC: 3 | RNVC: 2
374: RNCC: 4 | RNVC: 1

1 Jan 1968

5340-66-130-7705
Strap Hinge

661307705
R40: RNCC: 3 | RNVC: 2

3 Jun 1988

5340-66-130-1431
Mounting Plate

661301431
DE10045003: RNCC: 3 | RNVC: 2

25 Sep 1987

5340-66-160-5743
Access Cover

661605743
02560-030301: RNCC: 3 | RNVC: 2

7 Sep 2012

5340-66-147-7777
Basic Release Mecha

661477777
26882: RNCC: 3 | RNVC: 2

11 Sep 2001

5340-66-157-6926
Mounting Bracket

661576926
000363-15: RNCC: 3 | RNVC: 2

16 Feb 2009

5340-66-157-4047
Mounting Bracket

661574047
2023228: RNCC: 3 | RNVC: 2
HSA005242: RNCC: 5 | RNVC: 2
553764: RNCC: 5 | RNVC: 2

12 Nov 2008

5340-66-159-4616
Mounting Bracket

661594616
MLC-0331: RNCC: 3 | RNVC: 2

26 Jul 2011

5340-66-160-2287
Mounting Plate

661602287
BMA-A05-1037-01: RNCC: 3 | RNVC: 2

2 May 2012

5340-66-144-5383
Manual Control Handle

661445383
PUMP#1/17-18: RNCC: 3 | RNVC: 2
PUMP#1/17-18: RNCC: 5 | RNVC: 2

26 Nov 1998

5340-66-143-0969
Door Handle

661430969
M16 AND L38: RNCC: 3 | RNVC: 2

2 May 1997

5340-66-147-9395
Male Camlock To Bsp

661479395
AF050: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-66-037-3450
Helical Compression Spring Seat

660373450
EDG83: RNCC: 3 | RNVC: 2

28 Sep 1970

5340-66-157-1052
Metering Tube Kit

661571052
90494: RNCC: 3 | RNVC: 2

25 Jul 2008

5340-66-158-2781
Mounting Bracket

661582781
HYG2652: RNCC: 3 | RNVC: 2

22 Oct 2009

5340-66-155-1605
Manual Control Lever

661551605
5232030026: RNCC: 3 | RNVC: 2
15008820: RNCC: 5 | RNVC: 2

19 Dec 2006

5340-66-138-8436
Antipilferage Seal

661388436
HA03302: RNCC: 3 | RNVC: 2
HA03302: RNCC: 5 | RNVC: 2

29 Apr 1994

5340-66-157-2802
Mounting Plate

661572802
DE253140105: RNCC: 3 | RNVC: 2

25 Sep 2008

5340-66-142-7999
Bracket Set

661427999
DE250530302: RNCC: 3 | RNVC: 2

2 Nov 1996

5340-66-150-5770
General Purpose Resilient Mount

661505770
NO PRIMARY REF 66-150-5770: RNCC: 3 | RNVC: 2
08800202: RNCC: 5 | RNVC: 2

16 Apr 2003

5340-66-146-0882
Sealing Plug Assembly

661460882
438 4118-01: RNCC: 3 | RNVC: 2

13 Jan 2000

5340-66-153-5521
Ring & Bracket Asse

661535521
RAB-(303)-8099: RNCC: 3 | RNVC: 2
RAB-(303)-8099: RNCC: 5 | RNVC: 2

12 Sep 2005

5340-66-148-9565
Mounting Bracket

661489565
2306031/1: RNCC: 3 | RNVC: 2
2306031/1: RNCC: 5 | RNVC: 2

20 Mar 2003

5340-66-147-2439
Cassette Assembly

661472439
000/406/GMOWS.3030.08: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-66-151-9407
Door Hook

661519407
NO PRIMARY REF 66-151-9407: RNCC: 3 | RNVC: 2
1320483: RNCC: 5 | RNVC: 2

4 Mar 2004

5340-66-160-7854
Double Angle Bracket

661607854
15019499: RNCC: 3 | RNVC: 2

10 Dec 2012

5340-66-157-2684
Angle Bracket

661572684
10RE29442M: RNCC: 3 | RNVC: 2

22 Sep 2008

5340-66-144-0236
Loading Plate

661440236
DM48604: RNCC: 3 | RNVC: 2

14 Jan 1998

5340-66-084-1681
General Purpose Resilient Mount

660841681
12-74937: RNCC: 3 | RNVC: 2

17 Feb 1975

5340-66-147-4046
Head Seal

661474046
45320: RNCC: 3 | RNVC: 2

11 Oct 2001

5340-66-156-4433
Webbing Strap

661564433
10006014-110: RNCC: 3 | RNVC: 2
10006014-110: RNCC: 3 | RNVC: 2
10006014-110: RNCC: 5 | RNVC: 2

27 Nov 2007

5340-66-146-3786
Plate-Pivot

661463786
004224: RNCC: 3 | RNVC: 2

19 Apr 2000

5340-66-128-6347
Webbing Strap

661286347
HYG5674: RNCC: 3 | RNVC: 2

5 Mar 1992

5340-66-088-1838
Sealing Plug Assembly

660881838
1213-251286: RNCC: 3 | RNVC: 2

20 Apr 1975

5340-66-135-1874
Turnbuckle

661351874
23692.221: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-66-144-8933
Retaining Clip

661448933
HYM1050: RNCC: 3 | RNVC: 2
B-13: RNCC: 5 | RNVC: 2

23 Apr 1999

5340-66-132-6126
Angle Bracket

661326126
P5977PT12/1&2: RNCC: 3 | RNVC: 2

17 Mar 1989

5340-66-156-0747
Access Cover

661560747
RAY152231-1: RNCC: 3 | RNVC: 2

17 Aug 2007

5340-66-147-8522
Support Plate

661478522
F/2888-575-003B: RNCC: 3 | RNVC: 2
Q EDE F/2888-575-003B: RNCC: 5 | RNVC: 2

24 Sep 2001

5340-66-159-5442
Loop Clamp

661595442
RF1055: RNCC: 3 | RNVC: 1
RF1055-P1: RNCC: 3 | RNVC: 2
RF1055: RNCC: 5 | RNVC: 1
QVRLRF1055P1: RNCC: 5 | RNVC: 2

12 Sep 2011

5340-66-158-2665
Hand Crank

661582665
ADE(M)107-3 ITEM 6 TO 8, 17, 18-: RNCC: 3 | RNVC: 1

19 Oct 2009

5340-66-138-8075
Mounting Bracket

661388075
120270-77960: RNCC: 3 | RNVC: 2

21 Apr 1994

5340-66-153-5264
Double Angle Bracket

661535264
DE252280016: RNCC: 3 | RNVC: 2

2 Sep 2005

5340-66-106-1531
Bolt And Spacer Kit

661061531
DE230010142: RNCC: 3 | RNVC: 2

11 Oct 1983

5340-66-140-1408
Mounting Actuator Plate

661401408
NS001FA: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-66-125-3635
Butt Hinge

661253635
DE580160072-4: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-66-159-9281
Access Cover

661599281
N-20C-654: RNCC: 3 | RNVC: 2

13 Mar 2012

5340-66-155-8792
Mounting Plate

661558792
X50QS322: RNCC: 3 | RNVC: 2

22 Jun 2007

5340-66-161-1347
Access Cover

661611347
RP254914: RNCC: 3 | RNVC: 2
RP254914: RNCC: 5 | RNVC: 2

26 Jun 2013

5340-66-025-5307
Loop Clamp

660255307
H905: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-085-2910
Plain Solid Disk

660852910
16-301M14: RNCC: 3 | RNVC: 2

7 Mar 1975

5340-66-146-9577
Mounting Bracket

661469577
AC407: RNCC: 3 | RNVC: 2

20 Oct 2000

5340-66-160-6973
Manual Control Handle

661606973
10199-32: RNCC: 3 | RNVC: 2

24 Oct 2012

5340-66-156-9435
Catch Strike

661569435
1002944: RNCC: 3 | RNVC: 2
WSH1002944: RNCC: 5 | RNVC: 2

12 Jun 2008

5340-66-126-6532
Tee Standoff

661266532
0313726: RNCC: 3 | RNVC: 2

27 May 1991

5340-66-101-1435
Antipilferage Seal

661011435
DA92107000: RNCC: 3 | RNVC: 2
SEALBRASS: RNCC: C | RNVC: 1
SEALGALVANISED: RNCC: C | RNVC: 1

1 Jun 1979

5340-66-149-1004
Mounting Bracket

661491004
70001: RNCC: 3 | RNVC: 2

25 Nov 2002

5340-66-157-6710
Mounting Bracket

661576710
D-2653: RNCC: 3 | RNVC: 2

6 Feb 2009

5340-66-130-8406
Mounting Bracket

661308406
29000/332-1: RNCC: 2 | RNVC: 2
29000/332-1: RNCC: 3 | RNVC: 2

22 Jun 1988

5340-66-153-7227
Double Angle Bracket

661537227
AL02018-7: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-66-133-6788
Butt Hinge

5340-66-139-3073
Mounting Plate

5340-66-133-7145
Retaining Clip

5340-66-150-4013
Strapping Seal

661504013
NO PRIMARY REF 66-150-4013: RNCC: 3 | RNVC: 2
01707700: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-152-1255
Nonmetallic Bumper

661521255
MLC-0427: RNCC: 3 | RNVC: 2

11 Jun 2004

5340-66-128-0643
Angle Bracket

661280643
112.35.07.560: RNCC: 3 | RNVC: 2

13 Feb 1996

5340-66-157-5483
Retaining Clip

661575483
100563: RNCC: 3 | RNVC: 2
100563: RNCC: 5 | RNVC: 2

16 Dec 2008

5340-66-026-3926
Door Hinge Assembly

660263926
885007R91: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-159-0937
Retaining Strap

661590937
DB10013743: RNCC: 3 | RNVC: 2
DB10013743: RNCC: 3 | RNVC: 2

7 Feb 2011

5340-66-145-5805
Bow Handle

661455805
DE250980511: RNCC: 3 | RNVC: 2

7 Oct 1999

5340-66-150-8866
Buckle

661508866
BANBUK-3: RNCC: 3 | RNVC: 2

5 Sep 2003

5340-66-050-7798
Support Bracket

660507798
C4P1315-1: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

18 May 1972

5340-66-159-1061
Mounting Bracket

661591061
TA.A23.21.000: RNCC: 3 | RNVC: 2

21 Feb 2011

5340-66-103-4610
Resilient Mount Plate

661034610
GILV102: RNCC: 3 | RNVC: 2

23 May 1970

5340-66-090-1174
Corner Brace

660901174
AR15-006-1: RNCC: 3 | RNVC: 2

9 Sep 1975

5340-66-150-5304
Antipilferage Seal Locking Wire

661505304
NO PRIMARY REF 66-150-5304: RNCC: 3 | RNVC: 2
00731017: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-131-6460
Access Cover

661316460
640/2/28029: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-66-158-4747
Rim Latch

661584747
2820-3002: RNCC: 3 | RNVC: 2
D152 ITEM 36: RNCC: 5 | RNVC: 2

10 Feb 2010

5340-66-156-7561
Protection Bellows

661567561
037544: RNCC: 3 | RNVC: 2

19 Mar 2008

5340-66-110-8156
Pipe Hanger

661108156
181: RNCC: 3 | RNVC: 1

7 Feb 1984

5340-66-128-6569
Loop Clamp

661286569
999/4/39644: RNCC: 3 | RNVC: 2

21 May 1993

5340-66-147-4159
Cabinet Catch

661474159
F/2888-550-025H: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-025H: RNCC: 5 | RNVC: 2

4 May 2001

5340-66-152-1617
Mounting Bracket

661521617
C35: RNCC: 3 | RNVC: 2

5 Aug 2004

5340-66-143-3623
Plate

661433623
142311: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-66-077-9361
Cupboard Button

660779361
259: RNCC: 3 | RNVC: 2

20 Oct 1974

5340-66-137-7232
Manual Control Handle

661377232
1383-12/2A: RNCC: 3 | RNVC: 2

23 Mar 1993

5340-66-140-4010
Handwheel

661404010
FE85080A125X11: RNCC: 3 | RNVC: 2

24 Mar 1995

5340-66-156-6487
Nut And Bolt Locking Plate

661566487
471-12200-115: RNCC: 3 | RNVC: 2
507382: RNCC: 5 | RNVC: 2

21 Feb 2008

5340-66-150-0681
Stake Driving Cap

661500681
NO PRIMARY REF 66-150-0681: RNCC: 3 | RNVC: 2
01143019: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-155-4408
Access Cover

661554408
22U-43-23210: RNCC: 3 | RNVC: 2
22U-43-23210: RNCC: 5 | RNVC: 2

27 Mar 2007

5340-66-147-7366
Mounting Plate

661477366
BT-0415X048-D: RNCC: 3 | RNVC: 2

31 Jul 2001

5340-66-074-2666
Clamping Catch

660742666
SSCATCH: RNCC: 3 | RNVC: 1

26 May 1978

5340-66-151-8050
Mounting Plate

661518050
238644210000: RNCC: 3 | RNVC: 2
238644210000: RNCC: 3 | RNVC: 2

29 Apr 2004

5340-66-112-3635
Access Cover

661123635
527.20.09.096: RNCC: 3 | RNVC: 2
527.20.09.096: RNCC: 3 | RNVC: 2

20 Aug 1990

5340-66-024-1832
Buckle

660241832
MGO(M)494 ITEM 4: RNCC: 3 | RNVC: 1

22 Sep 1968

5340-66-154-5248
Mechanic Equipment Hardware Kit

661545248
A210 0351: RNCC: 3 | RNVC: 2

23 Jun 2006

5340-66-149-0840
Mounting Plate

661490840
HYG7644: RNCC: 3 | RNVC: 2

14 Nov 2002

5340-66-159-1638
Manual Control Handle

661591638
15017847: RNCC: 3 | RNVC: 2

18 Mar 2011

5340-66-147-8819
Clamp Strap

661478819
F/2888-575-001D: RNCC: 3 | RNVC: 2

27 Nov 2001

5340-66-160-3185
General Purpose Resilient Mount

661603185
P471-90200-101T25: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-66-108-9837
Access Cover

661089837
163P/0215/014 TYPE A: RNCC: 3 | RNVC: 1

18 Sep 1981

5340-66-155-5198
Mounting Plate

661555198
471-41243-919: RNCC: 3 | RNVC: 2
516230: RNCC: 5 | RNVC: 2

5 Apr 2007

5340-66-142-9625
Support Hook

661429625
658/2/06870/000: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-66-059-8193
Hinged Hasp

660598193
WELD0M9170: RNCC: 3 | RNVC: 1

23 Aug 1973

5340-66-146-3674
Webbing Strap

661463674
240859A: RNCC: 3 | RNVC: 2

13 Apr 2000

5340-66-161-1501
Mounting Bracket

661611501
53691M: RNCC: 3 | RNVC: 2

4 Jul 2013

5340-66-145-4337
Mounting Bracket

661454337
608/2/57993/002: RNCC: 3 | RNVC: 2

16 Sep 1999

5340-66-155-1633
Bolt And Spacer Kit

661551633
CS-577/2: RNCC: 3 | RNVC: 2

19 Dec 2006

5340-66-139-1678
Webbing Strap

661391678
FADCWWEBBING: RNCC: 3 | RNVC: 2

12 May 1994

5340-66-157-2913
Loop Clamp

661572913
10069350: RNCC: 3 | RNVC: 2

30 Sep 2008

5340-66-148-8324
Mortise Latch

661488324
PNP91: RNCC: 3 | RNVC: 2

25 Sep 2002

5340-66-159-0874
Double Angle Bracket

661590874
15017786: RNCC: 3 | RNVC: 2

3 Feb 2011

5340-66-147-2797
Flat Lacing Washer

661472797
912190: RNCC: 3 | RNVC: 2

22 Dec 2000

5340-66-146-1513
Frame Hood

661461513
521887 02: RNCC: 3 | RNVC: 2

1 Feb 2000

5340-66-157-5857
Block Clamp

661575857
C05258: RNCC: 3 | RNVC: 2

15 Jan 2009

5340-66-155-4886
Mounting Bracket

661554886
ARLM0850: RNCC: 3 | RNVC: 2

2 Apr 2007

5340-66-127-8832
Buckle

661278832
159WB3: RNCC: 3 | RNVC: 2

16 Mar 1987

5340-66-146-9593
Manual Control Lever

661469593
AC179: RNCC: 3 | RNVC: 2

24 Oct 2000

5340-66-128-5980
Friction Catch

661285980
HYL9866: RNCC: 3 | RNVC: 2

10 Oct 1990

5340-66-129-0509
Dial Combinat Lock

661290509
7L35: RNCC: 3 | RNVC: 2
CHATWOOD MILNER MK 1V: RNCC: 3 | RNVC: 2

14 Jul 1987

5340-66-103-0410
Shelf Bracket

661030410
Q430: RNCC: 4 | RNVC: 1

7 Apr 1970

5340-66-153-3377
Webbing Strap

661533377
00-500034A: RNCC: 3 | RNVC: 2

19 Jul 2005

5340-66-028-5367
Blanking Assy Cover

660285367
CA30025: RNCC: 3 | RNVC: 2
VU5710: RNCC: C | RNVC: 1

1 Jan 1968

5340-66-157-2014
Tether Cover

661572014
C22299: RNCC: 3 | RNVC: 2

2 Sep 2008

5340-66-146-1618
Distributing Cover

661461618
546949 02: RNCC: 3 | RNVC: 2

4 Feb 2000

5340-66-147-2584
Outer Panel

661472584
DAM6A(MOD.DX): RNCC: 3 | RNVC: 2

13 Dec 2000

5340-66-080-8824
Angle Bracket

660808824
19A6960: RNCC: 3 | RNVC: 2

26 Sep 1974

5340-66-024-1439
Swivel Caster

660241439
L575: RNCC: 3 | RNVC: 2
04791904: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-66-152-4809
Mounting Bracket

661524809
YA 437 822 01 14: RNCC: 3 | RNVC: 2

2 Feb 2005

5340-66-154-2316
General Purpose Resilient Mount

661542316
BP4896-11: RNCC: 3 | RNVC: 2

31 Mar 2006

5340-66-158-3554
Clamping Catch

661583554
TL-40-115-07: RNCC: 3 | RNVC: 2
DF01-602-09: RNCC: 5 | RNVC: 2

24 Nov 2009

5340-66-160-2520
Mounting Bracket

661602520
BMA-A16-0169-01: RNCC: 3 | RNVC: 2

9 May 2012

5340-66-156-6676
Nut And Bolt Locking Plate

661566676
471-12200-902: RNCC: 3 | RNVC: 2
508775: RNCC: 5 | RNVC: 2

25 Feb 2008

5340-66-143-3624
Plate

661433624
142314: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-66-151-8061
Mounting Plate

661518061
DE251600032: RNCC: 3 | RNVC: 2
DE251600032: RNCC: 3 | RNVC: 2

30 Apr 2004

5340-66-159-8262
Access Cover

661598262
BMA-A05-0820-01: RNCC: 3 | RNVC: 2

27 Feb 2012

5340-66-160-7329
Mounting Bracket

661607329
15011702-1420: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-66-141-6058
Mounting Bracket

661416058
3521501973: RNCC: 3 | RNVC: 2
3521501973: RNCC: 3 | RNVC: 2

20 Aug 1996

5340-66-113-3558
Loop Clamp

661133558
33-53341: RNCC: 3 | RNVC: 2

28 Mar 1982

5340-66-147-7930
Breather Filter Cap

661477930
H00153-002: RNCC: 3 | RNVC: 2
Q EDE HYFB/H00153-002: RNCC: 5 | RNVC: 2

24 Sep 2001

5340-66-151-9757
Mounting Plate

661519757
V487-0-M1-0: RNCC: 3 | RNVC: 2

29 Jun 2004

5340-66-102-1285
Spring Tension Clip

661021285
MU823883: RNCC: 3 | RNVC: 2

21 Aug 1979

5340-66-072-5000
Friction Catch

660725000
CATCHDOUBLEBALL1 15-16IN.: RNCC: 3 | RNVC: 2
04278605: RNCC: 5 | RNVC: 2

1 Sep 1974

5340-66-155-8371
Mounting Bracket

661558371
471-20026-120: RNCC: 3 | RNVC: 2
523300: RNCC: 5 | RNVC: 2

13 Jun 2007

5340-66-150-4044
Strapping

661504044
NO PRIMARY REF 66-150-4044: RNCC: 3 | RNVC: 2
05729014: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-122-6782
Half-Circle Clamp

661226782
83AX463Z: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

17 Oct 1984

5340-66-154-7765
Angle Bracket

661547765
15004480: RNCC: 3 | RNVC: 2

4 Sep 2006

5340-66-139-1797
Rear Door Stay

661391797
SCES10623: RNCC: 3 | RNVC: 1
STAY,REAR DOOR: RNCC: 5 | RNVC: 1

5 Jul 1994

5340-66-144-2806
Dust And Moisture Seal Protective Cap-Plug

661442806
467887100: RNCC: 3 | RNVC: 2

14 Sep 1998

5340-66-147-2661
Manifold

661472661
DLB9SDX(MOD.DX): RNCC: 3 | RNVC: 2

15 Dec 2000

5340-66-089-6462

5340-66-054-5279
Gearbox Latch

5340-66-067-5549
Access Door Hinge

5340-66-063-2056
Headle Straight Rod

5340-66-126-7475
Bow Handle

661267475
175-54-22840: RNCC: 3 | RNVC: 2

22 May 1986

5340-66-123-4582
Clamp

661234582
33-53348: RNCC: 3 | RNVC: 2

13 Dec 1985

5340-66-019-5422
Loop Clamp

660195422
X15: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-077-6198
Flush Door Ring

660776198
RING: RNCC: 3 | RNVC: 1
FERNHEAD 744/1: RNCC: 5 | RNVC: 2

6 Oct 1983

5340-66-153-2471
Mounting Bracket

661532471
2178950/0: RNCC: 3 | RNVC: 2
2178950/0: RNCC: 5 | RNVC: 2

29 Jun 2005

5340-66-154-3723
Mounting Bracket

661543723
DE251540024: RNCC: 3 | RNVC: 2

8 May 2006

5340-66-153-2757
Mounting Bracket

661532757
A210 0294: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-159-5939
Access Cover

661595939
875989: RNCC: 3 | RNVC: 2

20 Oct 2011

5340-66-140-0613
Mounting Plate

661400613
0110601040000D2: RNCC: 3 | RNVC: 2

10 Nov 1994

5340-66-140-5642
Angle Bracket

661405642
004-045: RNCC: 3 | RNVC: 2

12 May 1995

5340-66-153-3146
Multiple Angle Bracket

661533146
DE252200016: RNCC: 3 | RNVC: 2

12 Jul 2005

5340-66-157-7640

5340-66-139-8374
General Purpose Resilient Mount

661398374
GB530-NR2-M20-FM-0: RNCC: 3 | RNVC: 2
WD1422/15: RNCC: 3 | RNVC: 2
WD1427/15: RNCC: 3 | RNVC: 2

29 Aug 1994

5340-66-023-4231
Retaining Strap

660234231
NO PRIMARY REF 66-023-4231: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-160-4280
Helical Compression Spring Seat

661604280
KRD-31-18: RNCC: 3 | RNVC: 2

19 Jul 2012

5340-66-130-7160
Clamp Plate Assembl

661307160
65-13-124: RNCC: 3 | RNVC: 2

21 Apr 1988

5340-66-150-5348
Pipe Hanger

661505348
NO PRIMARY REF 66-150-5348: RNCC: 3 | RNVC: 2
01929354: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-157-4654
Mounting Plate

661574654
V01-01-04-03-00: RNCC: 3 | RNVC: 2

26 Nov 2008

5340-66-139-1254
Hand Wheel

661391254
FAISR102223: RNCC: 3 | RNVC: 2
102-223: RNCC: 3 | RNVC: 2
0050-00-010-2223: RNCC: C | RNVC: 1

15 Apr 1994

5340-66-138-0166
General Purpose Resilient Mount

661380166
P471-90200-101-T05: RNCC: 3 | RNVC: 2

27 Aug 1993

5340-66-146-2011
Catch Strike

661462011
472 8092-01: RNCC: 3 | RNVC: 2

11 Feb 2000

5340-66-156-0215
Mounting Bracket

661560215
ARLM0622-1: RNCC: 3 | RNVC: 2

25 Jul 2007

5340-66-156-5637
Webbing Strap

661565637
RN1000-0X6.05-1.55: RNCC: 3 | RNVC: 2

17 Jan 2008

5340-66-154-6628
T Bracket

661546628
ADF041-MC8177-014: RNCC: 3 | RNVC: 2

8 Aug 2006

5340-66-146-4026
Loop Clamp

661464026
H73430-04-6-2: RNCC: 3 | RNVC: 2
H84238: RNCC: 3 | RNVC: 2

8 May 2000

5340-66-153-2606
Mounting Bracket

661532606
A210 0164: RNCC: 3 | RNVC: 2

4 Jul 2005

5340-66-068-5263
Helical Compression Spring Retainer

660685263
2-1020: RNCC: 3 | RNVC: 2

6 Mar 1974

5340-66-154-8744
Mounting Bracket

661548744
15010745: RNCC: 3 | RNVC: 2

26 Sep 2006

5340-66-062-9081
Nonmetallic Bumper

660629081
RUBBER BUMPER: RNCC: 3 | RNVC: 1

25 Jun 1974

5340-66-035-7088
Leather Strap

660357088
49018: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

29 May 1970

5340-66-146-0838
Rear Cover

661460838
AK11032: RNCC: 3 | RNVC: 2
AK11032: RNCC: 5 | RNVC: 2
AK11032: RNCC: 5 | RNVC: 2

7 Jan 2000

5340-66-154-3668
Key Holder

661543668
DE251540003-8: RNCC: 3 | RNVC: 2

5 May 2006

5340-66-144-0400
Ke Computer Monitor

661440400
S0368/1: RNCC: 3 | RNVC: 2

16 Jan 1998

5340-66-058-2950
Retaining Clip

660582950
429: RNCC: 3 | RNVC: 2

8 Jun 1973

5340-66-034-0284
Dus Protective Plug

5340-66-142-9095
Locating Block

661429095
658/2/06462/000: RNCC: 3 | RNVC: 2

27 Feb 1997

5340-66-157-4074
Angle Bracket

661574074
112.35.07.676: RNCC: 3 | RNVC: 2

12 Nov 2008

5340-66-151-8701
Loop Clamp

661518701
LTA08112: RNCC: 3 | RNVC: 2

7 Nov 2003

5340-66-054-4572
Helical Compression Spring Seat

660544572
PV103-3: RNCC: 3 | RNVC: 2

18 Sep 1972

5340-66-051-7628
Dust And Moist Boot

5340-66-082-9986

5340-66-074-7303
General Purpose Resilient Mount

5340-66-088-8033
Spring Tension Clip

5340-66-090-7404
Angle Bracket

5340-66-041-4504
Butt Hinge

5340-66-153-2300
Access Cover

661532300
1573/40/01: RNCC: 3 | RNVC: 2

24 Jun 2005

5340-66-147-7737
Securing Ring

661477737
50562: RNCC: 3 | RNVC: 2

11 Oct 2001

5340-66-085-5139
Key Blank

660855139
K1054SR: RNCC: 3 | RNVC: 2
KB201R5P: RNCC: 5 | RNVC: 2

19 Oct 1975

5340-66-159-4082
Angle Bracket

661594082
4615600841: RNCC: 3 | RNVC: 2
4615600841: RNCC: 3 | RNVC: 2

23 Jun 2011

5340-66-155-9990
Bail Handle

661559990
1214367: RNCC: 3 | RNVC: 2

20 Jul 2007

5340-66-155-6076
Loop Clamp

661556076
A83AX600: RNCC: 3 | RNVC: 2

24 Apr 2007

5340-66-146-3259
Delrin Guide

661463259
2386-45360-00: RNCC: 3 | RNVC: 2
2386-45360-00: RNCC: 5 | RNVC: 2

6 Apr 2000

5340-66-142-9795
Mounting Bracket

661429795
658/2/06490/000: RNCC: 3 | RNVC: 2

9 May 1997

5340-66-152-0688
Latch Assembly

661520688
702L/C: RNCC: 3 | RNVC: 2
702L: RNCC: 5 | RNVC: 2

14 Sep 2004

5340-66-159-4395
Mounting Bracket

661594395
998/2/93230/000: RNCC: 3 | RNVC: 2

14 Jul 2011

5340-66-157-6329
Mounting Bracket

661576329
DE253280078-2: RNCC: 3 | RNVC: 2

27 Jan 2009

5340-66-154-3493
Threaded Rod End

661543493
502AMR329-5: RNCC: 3 | RNVC: 2
502AMR329-5: RNCC: 5 | RNVC: 1

2 May 2006

5340-66-106-9321
Mounting Bracket

661069321
BKT3: RNCC: 3 | RNVC: 2

22 Jun 1980

5340-66-142-9166
Mounting Bracket

661429166
658/2/05992/002: RNCC: 3 | RNVC: 2

7 Mar 1997

5340-66-075-4941
Dust And Moisture Seal Protective Cap

660754941
16D8109: RNCC: 3 | RNVC: 2

28 Jul 1974

5340-66-027-1380
Headless Straight Rod

660271380
DA67142001: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-014-4887
Retaining Strap

660144887
173G: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-123-2616
Line Supporting Strap

661232616
CHEEK85: RNCC: 3 | RNVC: 2
EK85: RNCC: 5 | RNVC: 2
EK85: RNCC: 5 | RNVC: 9

31 Oct 1985

5340-66-161-0959
Mounting Bracket

661610959
434127B: RNCC: 3 | RNVC: 2

4 Jun 2013

5340-66-154-6924
Electronic Equipment Hardware Kit

661546924
SCES13922: RNCC: 3 | RNVC: 2

15 Aug 2006

5340-66-014-4992
Rigid Caster

5340-66-135-6284
Dust And Moisture Seal Protective Plug

661356284
111.34.07.198: RNCC: 3 | RNVC: 2

4 Nov 1991

5340-66-160-7408
Dust And Moisture Seal Protective Cap-Plug

661607408
MLSBB0002: RNCC: 3 | RNVC: 2
MLSBB0002: RNCC: 5 | RNVC: 2

22 Nov 2012

5340-66-155-5102
Manual Control Handle

661555102
14548: RNCC: 3 | RNVC: 2

4 Apr 2007

5340-66-146-0847
Plate

661460847
438 0167-01: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-66-160-8624
Mounting Bracket

661608624
P10473-14: RNCC: 3 | RNVC: 2

13 Feb 2013

5340-66-160-5895
Webbing Strap

661605895
ANCRA 44257-10: RNCC: 3 | RNVC: 2
LSC-MD-D0076: RNCC: 5 | RNVC: 2
LSC-MD-D0076: RNCC: 5 | RNVC: 2

17 Sep 2012

5340-66-156-4549
Angle Bracket

661564549
15013575-02: RNCC: 3 | RNVC: 2

29 Nov 2007

5340-66-153-6746
Section Block Clamp

661536746
9125D07020030: RNCC: 3 | RNVC: 2

11 Oct 2005

5340-66-140-4267
Hand Crank

661404267
FE85086B100X9: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-66-160-9037
Angle Bracket

661609037
15020246: RNCC: 3 | RNVC: 2

28 Feb 2013

5340-66-155-4799
Rigid Caster

661554799
600HPR8TWRAAF: RNCC: 3 | RNVC: 2

30 Mar 2007

5340-66-122-5376
Webbing Strap

661225376
DE420010271: RNCC: 3 | RNVC: 2

10 Nov 1984

5340-66-122-9828
Adapter Plate

661229828
DE230010487: RNCC: 3 | RNVC: 2

30 Jun 1985

5340-66-159-1426
Mounting Bracket

661591426
045239A-00: RNCC: 3 | RNVC: 2

7 Mar 2011

5340-66-146-6941
Fire Damper

661466941
MSD-MO-SB-420-170-250-SS: RNCC: 3 | RNVC: 2

9 Aug 2000

5340-66-023-6220
Butt Hinge

660236220
AS1858: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-110-9777
Buckle

5340-66-158-0166
Mounting Bracket

661580166
1728-BH-0899-01: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-66-155-9009
Wheel

661559009
471-50809-173: RNCC: 3 | RNVC: 2
502608: RNCC: 5 | RNVC: 2

26 Jun 2007

5340-66-154-6864
Plain Solid Disk

661546864
VTR251-2TSUB14F4T19-7IIINM40W3P-: RNCC: 3 | RNVC: 1

14 Aug 2006

5340-66-148-5053
Blank Panel

661485053
OED-1749-18-27: RNCC: 3 | RNVC: 2

21 May 2002

5340-66-144-9464
Mounting Bracket

661449464
91/001/3/PP/002: RNCC: 3 | RNVC: 2
827502801: RNCC: 3 | RNVC: 2

9 Jun 1999

5340-66-158-5128
General Purpose Resilient Mount

661585128
40003694: RNCC: 3 | RNVC: 2
SES2000: RNCC: 5 | RNVC: 1

2 Mar 2010

5340-66-139-3287
Mounting Bracket

661393287
DE250530336: RNCC: 3 | RNVC: 2

22 Jan 1996

5340-66-155-4819
Mounting Bracket

661554819
60201: RNCC: 3 | RNVC: 2
60201: RNCC: 5 | RNVC: 2

30 Mar 2007

5340-66-148-3933
Cover

661483933
C11191: RNCC: 3 | RNVC: 2

8 Mar 2002

5340-66-156-2538
Webbing Strap

661562538
LN148N2: RNCC: 3 | RNVC: 2

5 Oct 2007

5340-66-156-2468
Mounting Bracket

661562468
A2100218: RNCC: 3 | RNVC: 2

2 Oct 2007

5340-66-152-4259
Dust And Moisture Seal Protective Cap

661524259
DE102000000: RNCC: 3 | RNVC: 1
SF 12: RNCC: 3 | RNVC: 2

23 Nov 2004

5340-66-159-0169
Spring Tension Clip

661590169
201-240: RNCC: 3 | RNVC: 2

7 Dec 2010

5340-66-146-3530
Locating Saddle

661463530
240559A: RNCC: 3 | RNVC: 2

13 Apr 2000

5340-66-156-8436
Mounting Bracket

661568436
471-20230-907: RNCC: 3 | RNVC: 2
471-20230-907: RNCC: 3 | RNVC: 2
512861: RNCC: 5 | RNVC: 2

5 May 2008

5340-66-117-8200
Dust And Moisture Seal Protective Plug

661178200
A201078: RNCC: 3 | RNVC: 2
PD672-14: RNCC: 3 | RNVC: 2

1 Nov 1983

5340-66-152-4145
Headless Straight Rod

661524145
MC-2055: RNCC: 3 | RNVC: 2

16 Nov 2004

5340-66-131-6572
Bracket

661316572
640/2/28072: RNCC: 3 | RNVC: 2

23 Mar 1989

5340-66-159-7638
Angle Bracket

661597638
ARLM0793: RNCC: 3 | RNVC: 2

14 Feb 2012

5340-66-155-3690
Pressure Cap

661553690
471-40217-315: RNCC: 3 | RNVC: 2
508713: RNCC: 5 | RNVC: 2

14 Mar 2007

5340-66-158-0090
Mortise Latch

661580090
JMS2001-70: RNCC: 3 | RNVC: 2

17 Jun 2009

5340-66-156-2940
Mounting Plate

661562940
15006320: RNCC: 3 | RNVC: 2

24 Oct 2007

5340-66-158-3686
Double Angle Bracket

661583686
1000441: RNCC: 3 | RNVC: 2

30 Nov 2009

5340-66-157-4238
Dust And Moisture Seal Protective Cap

661574238
CP6: RNCC: 3 | RNVC: 2
15017480: RNCC: 5 | RNVC: 2

18 Nov 2008

5340-66-161-0561
Angle Bracket

661610561
539.10.09.368: RNCC: 3 | RNVC: 2

8 May 2013

5340-66-145-6840
General Purpose Resilient Mount

661456840
LTA-H08-008-001/S: RNCC: 3 | RNVC: 2
LTA08012/S: RNCC: 3 | RNVC: 2

15 Dec 1999

5340-66-161-0090
Extension Handle

661610090
HR-1250-SS-99-00: RNCC: 3 | RNVC: 2

16 Apr 2013

5340-66-123-1440
Retaining Strap

661231440
V12-021-SH1/2 ITEM21: RNCC: 3 | RNVC: 2

9 Sep 1985

5340-66-155-5252
Rod End Clevis

661555252
0275C0239: RNCC: 3 | RNVC: 2

10 Apr 2007

5340-66-152-3777
Rifle Butt Bracket

661523777
DE251950012: RNCC: 3 | RNVC: 2

13 Oct 2004

5340-66-158-5614
Snap Hook

661585614
P10198-01: RNCC: 3 | RNVC: 2

25 Mar 2010

5340-66-161-3661
Bumper

661613661
QASM00706-008: RNCC: 3 | RNVC: 2

25 Sep 2013

5340-66-147-2557
Hinge

661472557
DAC339P: RNCC: 3 | RNVC: 2

12 Dec 2000

5340-66-159-2852
Corrosion Preventive Anode

661592852
CDZ6C-75: RNCC: 3 | RNVC: 2

20 May 2011

5340-66-150-8379
Rim Lock Set

661508379
C41-H81-003-002: RNCC: 3 | RNVC: 2

23 Sep 2003

5340-66-155-1185
Backing Plate

661551185
471-50217-102: RNCC: 3 | RNVC: 2
516924: RNCC: 5 | RNVC: 2

7 Dec 2006

5340-66-154-6657
Mounting Plate

661546657
275Z-0061: RNCC: 3 | RNVC: 2

9 Aug 2006

5340-66-142-9681
Mounting Plate

661429681
658/2/05619/001: RNCC: 3 | RNVC: 2

29 Apr 1997

5340-66-146-5738
Tempo Hull Fitting

661465738
UVS-SML-6M: RNCC: 3 | RNVC: 2

24 Jul 2000

5340-66-154-8130
Manual Control Handle

661548130
471-50806-138: RNCC: 3 | RNVC: 2
509450: RNCC: 5 | RNVC: 2

11 Sep 2006

5340-66-158-5937
Mounting Bracket

661585937
1728-BH-1311-01: RNCC: 3 | RNVC: 2

7 Apr 2010

5340-66-154-1726
Access Cover

661541726
S0D62A1E1820-007: RNCC: 3 | RNVC: 2

15 Mar 2006

5340-66-154-2787
Mounting Bracket

661542787
BMA-A05-0326: RNCC: 3 | RNVC: 2

11 Apr 2006

5340-66-157-4865
Access Cover

661574865
V0507-CE-1603: RNCC: 3 | RNVC: 2

28 Nov 2008

5340-66-158-3878
Expansion Plug

661583878
A4069975120: RNCC: 3 | RNVC: 2

8 Dec 2009

5340-66-122-6976
Angle Bracket

661226976
DE580310055: RNCC: 3 | RNVC: 2

22 Feb 1985

5340-66-125-2411
Tie-Down Strap

661252411
DE580180087: RNCC: 3 | RNVC: 2

5 Dec 1985

5340-66-161-2940
Mounting Bracket

661612940
15018970: RNCC: 3 | RNVC: 2

26 Aug 2013

5340-66-150-2044
Support Hook

661502044
NO PRIMARY REF 66-150-2044: RNCC: 3 | RNVC: 2
04056908: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-155-8874
Mounting Bracket

661558874
471-50809-126: RNCC: 3 | RNVC: 2
502560: RNCC: 5 | RNVC: 2

25 Jun 2007

5340-66-158-5625
Mounting Plate

661585625
P10190-06: RNCC: 3 | RNVC: 2

25 Mar 2010

5340-66-156-7693
Access Cover

661567693
471-51631-13: RNCC: 3 | RNVC: 2
524530: RNCC: 5 | RNVC: 2

27 Mar 2008

5340-66-157-5041
Mending Plate

661575041
V05-08-02-01-01: RNCC: 3 | RNVC: 2

3 Dec 2008

5340-66-156-4365
Angle Bracket

661564365
LAN-MD-D0113: RNCC: 3 | RNVC: 2

26 Nov 2007

5340-66-152-0208
Mounting Bracket

661520208
BMA-A05-0931-01: RNCC: 3 | RNVC: 2

15 Sep 2004

5340-66-141-3989
Webbing Strap

661413989
131-561731: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-66-131-4586
Angle Bracket

661314586
483847C3: RNCC: 3 | RNVC: 2

5 Nov 1988

5340-66-133-7911
Mounting Bracket

661337911
553.10.09.360: RNCC: 3 | RNVC: 2

28 May 1997

5340-66-155-7459
Retaining Strap

661557459
X50QL234: RNCC: 3 | RNVC: 2

18 May 2007

5340-66-160-9188
Retaining Strap

661609188
92401: RNCC: 3 | RNVC: 2

6 Mar 2013

5340-66-143-3658
Mounting Plate

661433658
142454: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-66-153-7099
Manual Control Handle

661537099
9125D07036023: RNCC: 3 | RNVC: 2

17 Oct 2005

5340-66-131-7031
Rod End Clevis

661317031
11M018-625: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-66-058-5874
Winch Bracket

5340-66-158-1685
Mounting Plate

661581685
BDI 30400-7-3S: RNCC: 3 | RNVC: 2

11 Sep 2009

5340-66-150-4145
Screw Thread Insert And Tool Assortment

661504145
NO PRIMARY REF 66-150-4145: RNCC: 3 | RNVC: 2
06462105: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-147-7216
Manual Control Handle

661477216
471-42022-801: RNCC: 3 | RNVC: 2
522182: RNCC: 5 | RNVC: 2

25 Jun 2001

5340-66-154-5878
Safety Cable Kit

661545878
FB2400-100: RNCC: 3 | RNVC: 2
FB2400-100: RNCC: 5 | RNVC: 2
HD8-93: RNCC: 5 | RNVC: 9

17 Jul 2006

5340-66-144-6367
Buckle

661446367
380-0004: RNCC: 3 | RNVC: 2
SR25: RNCC: 3 | RNVC: 2
HYM951: RNCC: 5 | RNVC: 2

9 Feb 1999

5340-66-148-4109
Spacer Ring

661484109
H73925-01-1-1: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-66-155-8309
Angle Bracket

661558309
X50RC349: RNCC: 3 | RNVC: 2

13 Jun 2007

5340-66-082-4628
Angle Bracket

660824628
570794: RNCC: 3 | RNVC: 2

1 Nov 1974

5340-66-150-0639
Padlock

661500639
NO PRIMARY REF 66-150-0639: RNCC: 3 | RNVC: 2
04649694: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-157-4864
Access Cover

661574864
V0507-CE-1604: RNCC: 3 | RNVC: 2

28 Nov 2008

5340-66-148-3937
Cover

661483937
C11195: RNCC: 3 | RNVC: 2

8 Mar 2002

5340-66-158-0024

5340-66-159-8745
Support Hook

661598745
1126.01: RNCC: 3 | RNVC: 1
1126.01-P1: RNCC: 3 | RNVC: 2
QVRL112601P1: RNCC: 5 | RNVC: 2
1126.01-P1: RNCC: 6 | RNVC: 9

7 Mar 2012

5340-66-138-7147
Extension Drawer Slide

661387147
917743/002: RNCC: 3 | RNVC: 2

28 Mar 1994

5340-66-144-8798
Mounting Bracket

661448798
14221/18/023: RNCC: 3 | RNVC: 2

16 Apr 1999

5340-66-135-9617
Mounting Plate

661359617
HOTT-25: RNCC: 3 | RNVC: 2

7 Mar 1992

5340-66-087-6632
Key Blank

660876632
C91: RNCC: 3 | RNVC: 2

20 Apr 1975

5340-66-148-3931
Cover

661483931
C11188: RNCC: 3 | RNVC: 2

8 Mar 2002

5340-66-143-1830
Butt Hinge

661431830
471-90422-26: RNCC: 3 | RNVC: 2
518550: RNCC: 3 | RNVC: 2

4 Jul 2002

5340-66-134-3318
Mounting Plate

661343318
62070411-000: RNCC: 3 | RNVC: 2

14 Aug 1991

5340-66-148-5532
Hydrob Overload Kit

661485532
90127: RNCC: 3 | RNVC: 2

12 Jul 2002

5340-66-155-0455
Access Cover

661550455
471-90467-400T03: RNCC: 3 | RNVC: 2
502465: RNCC: 5 | RNVC: 2

22 Nov 2006

5340-66-157-3864
Headless Straight Rod

661573864
AG-A0318: RNCC: 3 | RNVC: 2

31 Oct 2008

5340-66-156-9256
Mounting Bracket

661569256
TSU469-12: RNCC: 3 | RNVC: 2

5 Jun 2008

5340-66-161-2666
Webbing Strap

661612666
1600-03-0502A4: RNCC: 3 | RNVC: 2
QVRL1600030502A4: RNCC: 5 | RNVC: 2

12 Aug 2013

5340-66-024-6848
Double Angl Bracket

5340-66-096-4474
Nonmetallic Bumper

660964474
C5TZ4730B: RNCC: 3 | RNVC: 2

17 Sep 1978

5340-66-123-6037
Mounting Bracket

661236037
557.21.09.423: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-66-120-6612
Friction Catch

661206612
F1312-351700: RNCC: 3 | RNVC: 2

15 Sep 1984

5340-66-050-5333
Angle Bracket

660505333
C4P10349-13: RNCC: 3 | RNVC: 2

14 May 1972

5340-66-155-1609
Trunnion Block

661551609
275T-0174: RNCC: 3 | RNVC: 2

19 Dec 2006

5340-66-157-1098
Retaining Strap

661571098
MC-2510: RNCC: 3 | RNVC: 2
MC92510: RNCC: 5 | RNVC: 2

29 Jul 2008

5340-66-156-4029
Mounting Bracket

661564029
A0404901200: RNCC: 3 | RNVC: 2

20 Nov 2007

5340-66-155-9249
Mounting Bracket

661559249
P10217: RNCC: 3 | RNVC: 2

29 Jun 2007

5340-66-066-8904
Clamp Bolt Assembly

660668904
C10746: RNCC: 3 | RNVC: 2

19 Mar 1974

5340-66-152-4299
Mounting Bracket

661524299
434011A: RNCC: 3 | RNVC: 2

2 Dec 2004

5340-66-088-1600
Plug Button

660881600
1213-24571: RNCC: 3 | RNVC: 2

7 Apr 1975

5340-66-114-3277
Door Hook

661143277
829: RNCC: 3 | RNVC: 2

14 May 1982

5340-66-139-2941
Spacing Threaded Standoff

661392941
640/2/30554: RNCC: 3 | RNVC: 2

29 Aug 1994

5340-66-161-2651
Cushioning Pad

661612651
1600-03-0300C1-06: RNCC: 3 | RNVC: 2
QVRL1600030300C106: RNCC: 5 | RNVC: 2

12 Aug 2013

5340-66-158-5648
Mounting Plate

661585648
534.56.09.026: RNCC: 3 | RNVC: 2

25 Mar 2010

5340-66-152-0872
Mounting Bracket

661520872
VDA-001-013: RNCC: 3 | RNVC: 2
VDA-001-013: RNCC: 5 | RNVC: 2

7 May 2004

5340-66-146-3541
Gate

661463541
240309A: RNCC: 3 | RNVC: 2

13 Apr 2000

5340-66-143-4232
Cover Plate

661434232
492395: RNCC: 3 | RNVC: 2

24 Apr 1998

5340-66-161-2652
Cushioning Pad

661612652
1600-03-0300C1-04: RNCC: 3 | RNVC: 2
QVRL1600030300C104: RNCC: 5 | RNVC: 2

12 Aug 2013

5340-66-131-5014
Clamping Plate

661315014
3029850: RNCC: 3 | RNVC: 2
CU3029850: RNCC: 5 | RNVC: 2

16 Nov 1988

5340-66-150-5141
Latch Bar

661505141
NO PRIMARY REF 66-150-5141: RNCC: 3 | RNVC: 2
04055501: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-155-3866
Mounting Bracket

661553866
471-41014-690: RNCC: 3 | RNVC: 2
523513: RNCC: 5 | RNVC: 2

20 Mar 2007

5340-66-147-2486
Spider

661472486
003/405/GMOWS.3030.07: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-66-147-2729
Roller

661472729
DWR164: RNCC: 3 | RNVC: 2

20 Dec 2000

5340-66-146-1007
Cover

661461007
NC33: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-66-158-8784
Access Cover

661588784
02455-150100: RNCC: 3 | RNVC: 2

20 Sep 2010

5340-66-137-3508
Mounting Bracket

661373508
26-08192: RNCC: 3 | RNVC: 2
A000565 SHT 25: RNCC: 3 | RNVC: 2

16 Dec 1992

5340-66-153-2629
Mounting Bracket

661532629
A210 0321: RNCC: 3 | RNVC: 2

4 Jul 2005

5340-66-141-2123
Mounting Bracket

661412123
88.8110.0546: RNCC: 3 | RNVC: 2

30 Oct 1995

5340-66-128-9068
Handle

661289068
3254884: RNCC: 3 | RNVC: 2

18 Jan 1989

5340-66-137-6532
Mounting Bracket

661376532
556.10.09.138: RNCC: 3 | RNVC: 2

22 Oct 1993

5340-66-159-2734
Loop Clamp

661592734
AN-3808: RNCC: 3 | RNVC: 2

12 May 2011

5340-66-146-1981
Mounting Bracket

661461981
472 8017-01: RNCC: 3 | RNVC: 2

10 Feb 2000

5340-66-150-3929
Butt Hinge

661503929
NO PRIMARY REF 66-150-3929: RNCC: 3 | RNVC: 2
04473905: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-138-1655
General Purpose Resilient Mount

661381655
172 5679: RNCC: 3 | RNVC: 2

24 Dec 1993

5340-66-100-5224
Spring Tension Clip

661005224
SNB1371-17-4: RNCC: 3 | RNVC: 2
ADE(V)225-267: RNCC: 3 | RNVC: 2

29 Jan 1970

5340-66-112-8410
Loop Clamp

661128410
35B176: RNCC: 3 | RNVC: 1
35B176-1: RNCC: 3 | RNVC: 2

28 Mar 1982

5340-66-153-4394
Mounting Plate

661534394
DE252190042: RNCC: 3 | RNVC: 2

19 Aug 2005

5340-66-014-3775
Swivel Caster

660143775
L3500: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-66-155-8474
Mounting Bracket

661558474
471-40204-105: RNCC: 3 | RNVC: 2
515087: RNCC: 5 | RNVC: 2

15 Jun 2007

5340-66-160-0322
Rope Cleat

661600322
BLA192250-P1: RNCC: 3 | RNVC: 2
07514: RNCC: 3 | RNVC: 2
QVRLBLA192250P1: RNCC: 5 | RNVC: 2
BLA192250: RNCC: 6 | RNVC: 9

22 Mar 2012

5340-66-154-7619
Access Cover

661547619
15005274: RNCC: 3 | RNVC: 2

30 Aug 2006

5340-66-057-6425
Dust And Moisture Seal Protective Plug

660576425
AT59: RNCC: 3 | RNVC: 2

21 May 1973

5340-66-157-1671
Angle Bracket

661571671
553.10.09.505: RNCC: 3 | RNVC: 2

26 Aug 2008

5340-66-157-4024
Mounting Bracket

661574024
178257: RNCC: 3 | RNVC: 2
HSA005241: RNCC: 5 | RNVC: 2

11 Nov 2008

5340-66-153-3230
Stow Latch Housing

661533230
DE 100490008: RNCC: 3 | RNVC: 2

14 Jul 2005

5340-66-150-0248
Swivel Caster

661500248
NO PRIMARY REF 66-150-0248: RNCC: 3 | RNVC: 2
04788700: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-128-5475
Mounting Bracket

661285475
8943813520: RNCC: 3 | RNVC: 2
8943813520: RNCC: 3 | RNVC: 2

24 Jul 1989

5340-66-109-1457
Buckle

661091457
SR 25: RNCC: 3 | RNVC: 1
3-380-0004-9: RNCC: 3 | RNVC: 2

16 Apr 1986

5340-66-145-4376
Access Cover

661454376
LL N-68: RNCC: 3 | RNVC: 2

17 Sep 1999

5340-66-085-5050
Plate

660855050
5-10-45B: RNCC: 3 | RNVC: 2

12 Jun 1976

5340-66-154-6253
Bearing Wedge

661546253
6-001-501: RNCC: 3 | RNVC: 2
6-001-501: RNCC: 5 | RNVC: 2

31 Jul 2006

5340-66-043-1134
Angle Bracket

5340-66-033-8213
Loop Clamp

5340-66-052-4540
Spring Tension Clip

660524540
150919R1: RNCC: 3 | RNVC: 2
150919R1: RNCC: 3 | RNVC: 2
ADE(V)94-138: RNCC: 3 | RNVC: 2
150919R1: RNCC: 5 | RNVC: 9

22 Aug 1972

5340-66-150-0217
Rigid Caster

661500217
NO PRIMARY REF 66-150-0217: RNCC: 3 | RNVC: 2
01064462: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-145-6439
Double Angle Bracket

661456439
M113-0000-09-1001: RNCC: 3 | RNVC: 2
M113-0000-09-1001: RNCC: 5 | RNVC: 2

19 Nov 1999

5340-66-161-1668
Mounting Plate

661611668
ID25-210: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-66-153-7657
T Bracket

661537657
47110017707-124: RNCC: 3 | RNVC: 2

26 Oct 2005

5340-66-054-5178
Dust And Moisture Seal Boot

660545178
211721387: RNCC: 3 | RNVC: 2

15 Oct 1972

5340-66-024-7447
Pegboard Hook

660247447
H2B: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-020-0260
Retaining Strap

660200260
4403: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-146-1522
Lock Switc Actuator

661461522
535851 02: RNCC: 3 | RNVC: 2

1 Feb 2000

5340-66-081-9781
Dust Protective Cap

5340-66-135-3771
Mounting Bracket

5340-66-131-4203
Turnbuckle

5340-66-106-8934
Threaded Rod End

661068934
DY1319: RNCC: 3 | RNVC: 2
1650-15-050-1568: RNCC: 6 | RNVC: 9

5 Dec 1984

5340-66-146-9147
Mounting Bracket

661469147
ZG-106: RNCC: 3 | RNVC: 2

4 Oct 2000

5340-66-159-5481
Access Cover

661595481
9232 2005 41: RNCC: 3 | RNVC: 2
9232 2005 41: RNCC: 5 | RNVC: 2

13 Sep 2011

5340-66-158-2167
Mounting Bracket

661582167
RAM-B-101U-A: RNCC: 3 | RNVC: 2

1 Oct 2009

5340-66-133-2844
Double Angle Bracket

661332844
DA95212012: RNCC: 3 | RNVC: 2

20 Aug 1996

5340-66-135-3835
Flush Catch

661353835
571.10.09.073: RNCC: 3 | RNVC: 2

17 Oct 1991

5340-66-131-7405
Manual Control Lever

661317405
576.10.09.092: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-66-156-7692
Access Cover

661567692
471-51631-12: RNCC: 3 | RNVC: 2
524526: RNCC: 5 | RNVC: 2

27 Mar 2008

5340-66-154-5614
Door Lock Kits

661545614
939857: RNCC: 3 | RNVC: 2
01L-939857: RNCC: 5 | RNVC: 2

6 Jul 2006

5340-66-125-3243
Butt Hinge

661253243
DE580160115-8: RNCC: 3 | RNVC: 2

6 May 1986

5340-66-027-0813
Angle Bracket

660270813
ADE(M)59-20: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-052-4827
Window Retaining Plate

660524827
ADE(A)116-34: RNCC: 3 | RNVC: 2

11 Jul 1974

5340-66-143-4245
Cover

661434245
492429: RNCC: 3 | RNVC: 2

24 Apr 1998

5340-66-160-7608
Mounting Bracket

661607608
0100-11565: RNCC: 3 | RNVC: 2

29 Nov 2012

5340-66-125-3750
Butt Hinge

5340-66-122-6756
Retaining Strap

5340-66-123-2667
Turnbuckle

5340-66-133-7147
Strap

5340-66-155-1504
Metallic Solid Wheel

661551504
LM-13N: RNCC: 3 | RNVC: 2

15 Dec 2006

5340-66-146-9006
Bracket Front

661469006
FHB-01: RNCC: 3 | RNVC: 2

27 Sep 2000

5340-66-079-0034
Retaining Clip

660790034
2097454679: RNCC: 3 | RNVC: 2

12 Oct 1974

5340-66-153-4189
Mounting Plate

661534189
15013086: RNCC: 3 | RNVC: 2

15 Aug 2005

5340-66-158-9818
Mounting Bracket

661589818
A205925: RNCC: 3 | RNVC: 2
A205925: RNCC: 5 | RNVC: 2
A205925: RNCC: 5 | RNVC: 2

19 Nov 2010

5340-66-160-2292
Mounting Plate

661602292
BMA-A05-1771-01: RNCC: 3 | RNVC: 2

2 May 2012

5340-66-150-7849
Multiple Angle Bracket

661507849
LTA-A10-004-001: RNCC: 3 | RNVC: 2

3 Apr 2003

5340-66-127-3838
Manual Control Handle

661273838
TF00358: RNCC: 3 | RNVC: 2
TF00358-1: RNCC: 3 | RNVC: 2

1 Oct 1999

5340-66-152-4492
Rod End Clevis

661524492
1103023: RNCC: 3 | RNVC: 2
1103023: RNCC: 5 | RNVC: 2

15 Dec 2004

5340-66-147-7738
Securing Screw

661477738
45228: RNCC: 3 | RNVC: 2

11 Oct 2001

5340-66-065-9617
Turnbuckle Body

660659617
7349525: RNCC: 3 | RNVC: 2

23 Nov 1973

5340-66-026-3927
Door Hinge Assembly

660263927
885020R91: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-152-5013
General Purpose Access Door

661525013
12755525: RNCC: 3 | RNVC: 2

22 Feb 2005

5340-66-156-3270
Access Cover

661563270
15015267: RNCC: 3 | RNVC: 2

30 Oct 2007

5340-66-147-5822
Plug Button

661475822
2004024: RNCC: 3 | RNVC: 2
2004024: RNCC: 5 | RNVC: 2

7 Aug 2001

5340-66-153-2687
Mounting Bracket

661532687
A210 0285: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-050-6104
Angle Bracket

660506104
C4P10531-16: RNCC: 3 | RNVC: 2

18 May 1972

5340-66-157-9197
General Purpose Resilient Mount

661579197
503 13 26-01: RNCC: 3 | RNVC: 2
503 13 26-01: RNCC: 5 | RNVC: 2

15 May 2009

5340-66-125-3892
Butt Hinge

661253892
DE580180626: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-66-128-5969
Webbing Strap

661285969
900112: RNCC: 3 | RNVC: 2
HYL9737: RNCC: 5 | RNVC: 2

2 Oct 1990

5340-66-154-8831
Mounting Bracket

661548831
15009304: RNCC: 3 | RNVC: 2

28 Sep 2006

5340-66-128-4490
Expansion Plug

661284490
9111291280: RNCC: 3 | RNVC: 2
9111291280: RNCC: 5 | RNVC: 2

23 Oct 1987

5340-66-130-5012
Turnbuckle

661305012
AS 2319: RNCC: 3 | RNVC: 1

29 Jul 1988

5340-66-145-2848
Retaining Clamp Assembly

661452848
6141030095: RNCC: 3 | RNVC: 2

2 Sep 1999

5340-66-101-7485
Rim Lock

661017485
400/16749/E2: RNCC: 3 | RNVC: 2

8 Aug 1979

5340-66-142-8983
Electronic Equipment Hardware Kit

661428983
MX-F332: RNCC: 3 | RNVC: 2
DE530020038: RNCC: 3 | RNVC: 2

7 Feb 1997

5340-66-148-7302
Snap Hook

661487302
SS2450NX-10: RNCC: 3 | RNVC: 2

27 Mar 2003

5340-66-126-8995
Clamp

661268995
360077: RNCC: 3 | RNVC: 2

3 Sep 1986

5340-66-086-9100

5340-66-090-7395
Butt Hinge

5340-66-028-7799
Manual Contro Lever

5340-66-146-9154
Explosion-Proof Hou

661469154
ZS-200: RNCC: 3 | RNVC: 2

4 Oct 2000

5340-66-157-2888
Buckle

661572888
10040385: RNCC: 3 | RNVC: 2

29 Sep 2008

5340-66-124-9210
Handle Mechanism

661249210
3VX7524-OCCD0: RNCC: 3 | RNVC: 2

10 Jan 1986

5340-66-154-1666
Access Cover

661541666
S0D62A1E1820-206: RNCC: 3 | RNVC: 2

14 Mar 2006

5340-66-115-6231
Access Cover

661156231
111.36.07.358: RNCC: 3 | RNVC: 2

20 Oct 1995

5340-66-147-7792
Differential Pressu

661477792
FHCW23L2-AACYY-BE: RNCC: 3 | RNVC: 2

13 Sep 2001

5340-66-156-3956
Bumper

661563956
10001465-01: RNCC: 3 | RNVC: 2
0873 2105: RNCC: 5 | RNVC: 2

19 Nov 2007

5340-66-151-8122
Block Clamp

661518122
LTA08037: RNCC: 3 | RNVC: 2

1 Oct 2003

5340-66-151-8363
Cushioning Pad

661518363
AC1010-P: RNCC: 3 | RNVC: 2

24 Dec 2003

5340-66-160-2109
Dust And Moisture Seal Protective Cap-Plug

661602109
FPR05025: RNCC: 3 | RNVC: 2
121069: RNCC: 5 | RNVC: 2

27 Apr 2012

5340-66-161-3068
Rod End Connector

661613068
532.20.09.019: RNCC: 3 | RNVC: 2

2 Sep 2013

5340-66-133-6573
Nonmetallic Bumper

661336573
M507-25333: RNCC: 3 | RNVC: 2

15 Feb 1990

5340-66-138-9562
Cover

661389562
5975-97-151-2456: RNCC: 3 | RNVC: 2

10 Nov 1993

5340-66-158-2552
Catch Strike

661582552
HYL9133: RNCC: 3 | RNVC: 2

14 Oct 2009

5340-66-161-2856
Mounting Bracket

661612856
15019448: RNCC: 3 | RNVC: 2

21 Aug 2013

5340-66-160-5854
Mounting Bracket

661605854
R184 050 F79U-006 304SS: RNCC: 3 | RNVC: 2
HSA006210: RNCC: 5 | RNVC: 2
2070992: RNCC: 5 | RNVC: 2

13 Sep 2012

5340-66-139-8629
Vent Plug

661398629
A12568-47.04: RNCC: 3 | RNVC: 2

1 Sep 1994

5340-66-153-3889
Mounting Bracket

661533889
1014364067: RNCC: 3 | RNVC: 2
1014364067: RNCC: 5 | RNVC: 2

8 Aug 2005

5340-66-147-7729
Cruciform

661477729
20LB-CF: RNCC: 3 | RNVC: 2

17 Sep 2001

5340-66-120-6182
Double Angle Bracket

661206182
X50RX31: RNCC: 3 | RNVC: 2
X50RX31: RNCC: 5 | RNVC: 9

19 Sep 1984

5340-66-027-9101
Lock

660279101
5S8097: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-146-0808
Split Gland

661460808
AK70145: RNCC: 3 | RNVC: 2
AK70145: RNCC: 5 | RNVC: 2
AK70145: RNCC: 5 | RNVC: 2

7 Jan 2000

5340-66-143-7730
Webbing Strap

661437730
1804-2RS-1209: RNCC: 3 | RNVC: 2

29 Jul 1997

5340-66-147-3195
Alignment Shaft

661473195
752-2000-42: RNCC: 3 | RNVC: 2

8 Mar 2001

5340-66-126-2367
Mounting Plate

661262367
6E5-82588-00: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-66-161-2097
Mounting Bracket

661612097
054741A-00: RNCC: 3 | RNVC: 2

25 Jul 2013

5340-66-131-0508
Upper-Launche Clamp

661310508
EX20048603: RNCC: 3 | RNVC: 2

3 Dec 1988

5340-66-128-4445
Dust And Moisture Seal Boot

661284445
5136390020: RNCC: 3 | RNVC: 2
5136390020: RNCC: 5 | RNVC: 2

23 Oct 1987

5340-66-128-5944
Clamping Catch

661285944
HYL8997: RNCC: 3 | RNVC: 2

7 Aug 1990

5340-66-147-2514
Bush

661472514
60356: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-66-157-6736
Lifting Handle

661576736
D-2702: RNCC: 3 | RNVC: 2
HI1-01-002: RNCC: 5 | RNVC: 2

6 Feb 2009

5340-66-147-8579
Stowage Cabin Panel

661478579
F/2888-550-034K: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-034K: RNCC: 5 | RNVC: 2

25 Sep 2001

5340-66-137-2827
Spring Tension Clip

661372827
0110160000000D0: RNCC: 3 | RNVC: 2

31 Oct 1992

5340-66-136-3383
Dust And Moisture Seal Protective Cap

661363383
072.055.00: RNCC: 3 | RNVC: 2

3 Sep 1992

5340-66-090-8682
Compression Cup

660908682
SU16: RNCC: 3 | RNVC: 2
MU16: RNCC: 3 | RNVC: 2

22 Feb 1976

5340-66-126-0825
Clamping Catch

661260825
01613: RNCC: 3 | RNVC: 2

19 Sep 1990

5340-66-155-6384
Angle Bracket

661556384
X50QK431: RNCC: 3 | RNVC: 2

1 May 2007

5340-66-151-8049
Mounting Plate

661518049
238643670000: RNCC: 3 | RNVC: 2
238643670000: RNCC: 3 | RNVC: 2

28 Apr 2004

5340-66-132-5766
General Purpose Resilient Mount

661325766
FM710030: RNCC: 3 | RNVC: 2

17 Mar 1989

5340-66-027-9849
Electrical-Mechanical Equipment Post

660279849
601-018: RNCC: 3 | RNVC: 2
AT211: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-66-154-5337
Angle Bracket

661545337
004-01547-001: RNCC: 3 | RNVC: 2

28 Jun 2006

5340-66-144-6562
'R' Clip And Pin As

661446562
43-1704: RNCC: 3 | RNVC: 2
FYD1704: RNCC: 3 | RNVC: 2

23 Feb 1999

5340-66-143-0983
Indicator

661430983
QIC-30: RNCC: 3 | RNVC: 2
Q1 C30: RNCC: 3 | RNVC: 2

5 May 1997

5340-66-154-8258
Threaded Rod End

661548258
15001811: RNCC: 3 | RNVC: 2

13 Sep 2006

5340-66-083-8071
Mast Lifting Clamp

660838071
19A1306: RNCC: 3 | RNVC: 2

27 Jan 1975

5340-66-144-6049
Webbing Strap

661446049
AS/NZS 4380:1996: RNCC: 3 | RNVC: 1
11-240591A-410: RNCC: 3 | RNVC: 2

16 Dec 1998

5340-66-088-2315
General Purpose Resilient Mount

660882315
1213-56921: RNCC: 3 | RNVC: 2

11 May 1975

Load More Results