What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is a Hasp Staple?

A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

Hardware, Commercial - Australia (AU)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Australia (AU) - NCB is 66

Page 5 of 29

NSN Format for Hardware, Commercial
Codified by Australia

53	40	66	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Australia (AU)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 53 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 78 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 109 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 25 Items
Holder,Spring 26 Items
What is a Compression Cup? 11 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 43 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 85 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 54 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 27 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 249 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 36 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 87 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 39 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 11 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 16 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 15 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Rim Latch? 18 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Rim Lock? 13 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 12 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 17 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 17 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 18 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 103 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 11 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 59 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 14 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 14 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Plug Button? 12 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Corrosion Preventive Anode? 27 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 78 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 268 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 88 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 70 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 36 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 40 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 41 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Plain Solid Disk? 41 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 12 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 608 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 57 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 54 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 317 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 48 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 40 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 83 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Quick Release Plunger? 17 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 65 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 24 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 14 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 22 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 49 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 19 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 151 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 15 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 444 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 128 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 42 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 53 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 25 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 201 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 33 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 133 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 42 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 54 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Strapping? 28 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 75 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Screw Thread Insert And Tool Assortment? 18 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 28 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 18 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 740 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 11 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 14 Items
What is an Antipilferage Seal? 27 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 129 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Seal Retaining Plate? 29 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 47 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1862 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 15 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 11 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 10 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 766 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 27 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 65 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 79 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 71 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 22 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 12 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 14 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 35 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 50 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 28 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 15 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 20 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 11 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 83 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 138 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 393 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 38 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 11 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 22 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
What is a Key Blank? 22 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 10 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 114 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 11 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 20 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 12 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is a Bumper? 74 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 5 of 29

5340-66-159-8612
Mounting Bracket

661598612
ARLM2133-1: RNCC: 3 | RNVC: 2

6 Mar 2012

5340-66-151-7077
Mounting Bracket

661517077
LTA-A08-036: RNCC: 3 | RNVC: 2
LTA-A08-036-001: RNCC: 3 | RNVC: 2

18 Sep 2003

5340-66-130-8430
Hinge Stop

661308430
1/B3B-31-68: RNCC: 3 | RNVC: 2

23 Jun 1988

5340-66-142-9639
Angle Bracket

661429639
658/2/06199/000: RNCC: 3 | RNVC: 2

4 Apr 1997

5340-66-113-9338

5340-66-154-6963
Angle Bracket

661546963
DE252580012: RNCC: 3 | RNVC: 2

15 Aug 2006

5340-66-157-6323
Mounting Bracket

661576323
DE253280068: RNCC: 3 | RNVC: 2

23 Jan 2009

5340-66-155-4721
Loop Clamp

661554721
124060-77680: RNCC: 3 | RNVC: 2

29 Mar 2007

5340-66-110-7356
Seal Retaining Plate

661107356
556.10.09.211: RNCC: 3 | RNVC: 2

26 Jul 1995

5340-66-097-7742
Detent Plunger

660977742
TMGB246: RNCC: 3 | RNVC: 2

14 May 1978

5340-66-058-2952
Snap Hook

660582952
RF533: RNCC: 3 | RNVC: 2

8 Jun 1973

5340-66-152-1795
Mounting Bracket

661521795
DTSA3TPR: RNCC: 3 | RNVC: 2
MLC-0460: RNCC: 5 | RNVC: 2

14 Aug 2004

5340-66-157-4649
Mounting Bracket

661574649
V01-01-02-02-00: RNCC: 3 | RNVC: 2

26 Nov 2008

5340-66-151-1709
Mounting Bracket

661511709
LTA-A16-0062-01: RNCC: 3 | RNVC: 2
LTA-A16-0062: RNCC: 5 | RNVC: 2

2 Jul 2003

5340-66-126-2316
Loop Clamp

661262316
90465-13M11: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-66-148-8829
Double Angle Bracket

661488829
C06525: RNCC: 3 | RNVC: 2

12 Nov 2002

5340-66-090-1176
Hand Crank

660901176
AR15-017: RNCC: 3 | RNVC: 2

9 Sep 1975

5340-66-138-4837
Metal Grille

661384837
E9100-104: RNCC: 3 | RNVC: 2

6 Dec 1993

5340-66-150-2868
Loop Clamp

661502868
NO PRIMARY REF 66-150-2868: RNCC: 3 | RNVC: 2
02251254: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-153-7087
Mounting Plate

661537087
47760414210-101: RNCC: 3 | RNVC: 2

17 Oct 2005

5340-66-125-3891
Spring Tension Clip

661253891
F: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-66-154-5835
Angle Bracket

661545835
DE252130110: RNCC: 3 | RNVC: 2

13 Jul 2006

5340-66-156-3450
Spring Tension Clip

661563450
15016480-01: RNCC: 3 | RNVC: 2

2 Nov 2007

5340-66-111-4141
Loop Clamp

661114141
1M3-88-769: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-66-141-3879
Access Cover

661413879
D50718: RNCC: 3 | RNVC: 2

12 May 1995

5340-66-156-4934
Access Cover

661564934
5305203: RNCC: 3 | RNVC: 2
15012830: RNCC: 5 | RNVC: 2

11 Dec 2007

5340-66-156-2694
Access Cover

661562694
471-50429-107: RNCC: 3 | RNVC: 2
503097: RNCC: 5 | RNVC: 2

15 Oct 2007

5340-66-155-4027
Loop Clamp

661554027
07281-00709: RNCC: 3 | RNVC: 2
07281-00709: RNCC: 5 | RNVC: 2

21 Mar 2007

5340-66-058-2928
Snap Hook

660582928
RF653: RNCC: 3 | RNVC: 2
FG242-1: RNCC: 5 | RNVC: 2

8 Jun 1973

5340-66-159-5417
Extension Drawer Slide

661595417
998/1/93228/004: RNCC: 3 | RNVC: 2

8 Sep 2011

5340-66-139-0945
Plug

661390945
164366: RNCC: 3 | RNVC: 2

2 Mar 1994

5340-66-160-1064
Mounting Bracket

661601064
BMA-A08-0326-01: RNCC: 3 | RNVC: 2

2 Apr 2012

5340-66-142-5871
Mounting Bracket

661425871
DSA-10-389-13: RNCC: 3 | RNVC: 2
DSA-10-389-13: RNCC: 3 | RNVC: 2

26 Nov 1996

5340-66-149-7737
Retaining Clip

661497737
NO PRIMARY REF 66-149-7737: RNCC: 3 | RNVC: 2
01099550: RNCC: 5 | RNVC: 2

9 Apr 2003

5340-66-049-8331
Hing Bottom Bracket

5340-66-030-2337
Poker

660302337
CU170: RNCC: 3 | RNVC: 2

18 Nov 1968

5340-66-152-7907
Manual Control Lever

661527907
65.23.122: RNCC: 3 | RNVC: 2
SE65.23.122: RNCC: 5 | RNVC: 2

17 Mar 2005

5340-66-152-3774
Butt Template Plate

661523774
DE251930013: RNCC: 3 | RNVC: 2

14 Oct 2004

5340-66-156-0027
Spring Tension Clip

661560027
8186-08-000: RNCC: 3 | RNVC: 2

23 Jul 2007

5340-66-105-2396
Mounting Plate

661052396
DA76509004: RNCC: 3 | RNVC: 2
SM1495-01: RNCC: 5 | RNVC: 2

14 Jul 1980

5340-66-155-6153
Mounting Bracket

661556153
4000-45163000: RNCC: 3 | RNVC: 2
45163-000: RNCC: 5 | RNVC: 2

24 Apr 2007

5340-66-085-8602
Screw Hook

660858602
NO PRIMARY REF 66-085-8602: RNCC: 3 | RNVC: 2

7 May 1976

5340-66-154-6373
Access Cover

661546373
6-160-3028: RNCC: 3 | RNVC: 2
6-160-3028: RNCC: 5 | RNVC: 2

1 Aug 2006

5340-66-067-7768
Loop Clamp

5340-66-156-8065
Access Cover

661568065
203-54-73711: RNCC: 3 | RNVC: 2
203-54-73711: RNCC: 5 | RNVC: 2

21 Apr 2008

5340-66-058-2921
Flush Door Ring

660582921
KAD246: RNCC: 3 | RNVC: 2

19 Mar 1974

5340-66-157-4774
Butt Hinge

661574774
V10-22-01-01-03: RNCC: 3 | RNVC: 2
CH100: RNCC: 5 | RNVC: 1

27 Nov 2008

5340-66-147-7631
Access Cover

661477631
6671390-9: RNCC: 3 | RNVC: 2
6671390-9: RNCC: C | RNVC: 1

15 Aug 2001

5340-66-145-9370
Plain Solid Disk

661459370
DE132470001 ITEM 8: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-66-150-8085
Butt Hinge

661508085
CH4040: RNCC: 3 | RNVC: 1
LTA05082: RNCC: 5 | RNVC: 2

16 Apr 2003

5340-66-151-1639
Loop Clamp

661511639
LTA08116: RNCC: 3 | RNVC: 2

25 Jun 2003

5340-66-165-0499

5340-66-142-9150
Latch Plate

661429150
658/2/06524/021: RNCC: 3 | RNVC: 2

3 Mar 1997

5340-66-045-4404
Angle Bracket

5340-66-065-3396
Loop Clamp

5340-66-045-2632
Spring Tension Clip

5340-66-157-8327
Double Angle Bracket

661578327
R103766: RNCC: 3 | RNVC: 2

8 Apr 2009

5340-66-161-2767
Mounting Bracket

661612767
15018167-01: RNCC: 3 | RNVC: 2

19 Aug 2013

5340-66-142-4643
Mounting Bracket

661424643
471-44468-533T02: RNCC: 3 | RNVC: 2
514597: RNCC: 3 | RNVC: 2

20 Aug 1996

5340-66-151-1969
Track Stop

661511969
ARLM0475-1: RNCC: 3 | RNVC: 2

23 Apr 2004

5340-66-142-6557
Mounting Bracket

661426557
DSA-10-388-3: RNCC: 3 | RNVC: 2

13 Jan 1997

5340-66-149-8384
Coat And Hat Hook

661498384
NO PRIMARY REF 66-149-8384: RNCC: 3 | RNVC: 2
00557366: RNCC: 5 | RNVC: 2

9 Apr 2003

5340-66-155-9162
Lock Plate

661559162
471-50810-130: RNCC: 3 | RNVC: 2
506941: RNCC: 5 | RNVC: 2

28 Jun 2007

5340-66-138-6721
General Purpose Resilient Mount

661386721
N63-146-95-125-6-FF: RNCC: 3 | RNVC: 2
SM10000: RNCC: 5 | RNVC: 2

10 Mar 1994

5340-66-158-7777
Mounting Bracket

661587777
BMA-A10-0101: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-66-140-5821
Block Assembly

661405821
004-153-01: RNCC: 3 | RNVC: 2

26 Oct 1995

5340-66-160-0723
Catch Strike

661600723
01.535/SS: RNCC: 3 | RNVC: 1
1138.17-P1(HOOK): RNCC: 3 | RNVC: 2
QVRL113817P1HOOK: RNCC: 5 | RNVC: 2
1138.17-P1 (HOOK): RNCC: 6 | RNVC: 9

27 Mar 2012

5340-66-159-1736
Mounting Bracket

661591736
15018117: RNCC: 3 | RNVC: 2

22 Mar 2011

5340-66-029-4449
Helical Compression Spring Retainer

660294449
GEG193: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-147-2552
Shield

661472552
DAC7240: RNCC: 3 | RNVC: 2

12 Dec 2000

5340-66-149-2668
Spring Tension Clip

661492668
NO PRIMARY REF 66-149-2668: RNCC: 3 | RNVC: 2
29218500: RNCC: 5 | RNVC: 2

24 Mar 2003

5340-66-123-5295
Handle Operatin Rod

661235295
750-05.2500-33: RNCC: 3 | RNVC: 2

13 Feb 1998

5340-66-140-4704
General Purpose Resilient Mount

661404704
P471-90200-101: RNCC: 3 | RNVC: 1
P471-90200-101T15: RNCC: 3 | RNVC: 2

12 May 1995

5340-66-159-1225
Mounting Plate

661591225
FE5915-080010: RNCC: 3 | RNVC: 2

1 Mar 2011

5340-66-156-5073
Seal Retaining Plate

661565073
471-62807-100: RNCC: 3 | RNVC: 2
502729: RNCC: 5 | RNVC: 2

13 Dec 2007

5340-66-156-0988
Access Cover

661560988
RP407534-01: RNCC: 3 | RNVC: 2
RP407534-01: RNCC: 5 | RNVC: 2

24 Aug 2007

5340-66-121-7792

5340-66-014-2463
Butt Hinge Leaf

5340-66-151-8066
Mounting Bracket

661518066
DE251600003: RNCC: 3 | RNVC: 2
DE251600003: RNCC: 3 | RNVC: 2

30 Apr 2004

5340-66-082-9480
Padlock

660829480
ABUS999-20: RNCC: 3 | RNVC: 2
5340-66TSN9720: RNCC: 6 | RNVC: 9

24 Jan 1975

5340-66-150-0227
Swivel Caster

661500227
NO PRIMARY REF 66-150-0227: RNCC: 3 | RNVC: 2
01961119: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-072-1779
Barrel Bolt

660721779
570-4IN: RNCC: 3 | RNVC: 1
04048602: RNCC: 5 | RNVC: 2
HBB1100: RNCC: 5 | RNVC: 2

16 Mar 1975

5340-66-151-3426
Angle Bracket

661513426
RAY171000-27: RNCC: 3 | RNVC: 2

24 Mar 2004

5340-66-158-3552
Clamping Catch

661583552
K2-3001-89: RNCC: 3 | RNVC: 2
DF01-602-10: RNCC: 5 | RNVC: 2

24 Nov 2009

5340-66-147-3194
Alignment Shaft

661473194
752-2002-91: RNCC: 3 | RNVC: 2

8 Mar 2001

5340-66-132-0919
Control Rod Extensi

661320919
OM3-142359: RNCC: 3 | RNVC: 2

13 Apr 1989

5340-66-158-7956
Mounting Plate

661587956
P0000262: RNCC: 3 | RNVC: 2

3 Aug 2010

5340-66-154-5773
Plain Solid Disk

661545773
DE252130103: RNCC: 3 | RNVC: 2

12 Jul 2006

5340-66-158-9241
Access Cover

661589241
TF01918-1: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-66-132-0865
Mounting Bracket

661320865
GH1018/1: RNCC: 3 | RNVC: 2

19 Apr 1989

5340-66-019-5633
Expansion Plug

660195633
TYPE A: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-128-5597
Hose Clip

661285597
8941494730: RNCC: 3 | RNVC: 2
8941494730: RNCC: 5 | RNVC: 2

4 Aug 1989

5340-66-025-4688
Retaining Strap

5340-66-155-6584
Helical Compression Spring Seat

661556584
217-68-249: RNCC: 3 | RNVC: 2

3 May 2007

5340-66-158-8864
Mounting Bracket

661588864
BMF-A05-0317: RNCC: 3 | RNVC: 2

24 Sep 2010

5340-66-063-3689
General Purpose Resilient Mount

660633689
M116-12: RNCC: 3 | RNVC: 2

1 Feb 1985

5340-66-154-7480
Tie Down Adapter

661547480
15002172: RNCC: 3 | RNVC: 2

28 Aug 2006

5340-66-131-0509
Lower-Launche Clamp

661310509
EX20048604: RNCC: 3 | RNVC: 2

3 Dec 1988

5340-66-124-5105
General Purpose Resilient Mount

661245105
M503-25336-55: RNCC: 3 | RNVC: 2

13 Sep 1985

5340-66-161-3649
Snap Hook

661613649
BD210266: RNCC: 3 | RNVC: 2

25 Sep 2013

5340-66-152-1495
Trunnion Clamp

661521495
434037S: RNCC: 3 | RNVC: 2

17 Jul 2004

5340-66-155-6212
Access Cover

661556212
P10035-18: RNCC: 3 | RNVC: 2

27 Apr 2007

5340-66-155-6273
Helical Compression Spring Retainer

661556273
P10035-15: RNCC: 3 | RNVC: 2

30 Apr 2007

5340-66-126-2332
Ignition Coi Damper

661262332
6A0-82317-00: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-66-033-4648
Angle Bracket

5340-66-048-6570

5340-66-133-6890
Snap Hook

661336890
7101-3/8: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

15 Mar 1990

5340-66-141-3765
Rod End Retainer

661413765
501WG95008000: RNCC: 3 | RNVC: 2
12K265-7: RNCC: 5 | RNVC: 9

3 Aug 1995

5340-66-153-8777
General Purpose Resilient Mount

661538777
BLT-1: RNCC: 3 | RNVC: 2

23 Nov 2005

5340-66-143-3618
Locating Pin

661433618
142258-2: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-66-097-4388
Clamping Catch

5340-66-099-8114
Access Cover

5340-66-107-5158

5340-66-149-5674

5340-66-138-9890
Access Cover

661389890
700/2/24683: RNCC: 3 | RNVC: 2

10 Jan 1994

5340-66-151-8123
Loop Clamp

661518123
LTA08113: RNCC: 3 | RNVC: 2

1 Oct 2003

5340-66-154-7790
Manual Control Handle

661547790
236607AA: RNCC: 3 | RNVC: 2

4 Sep 2006

5340-66-164-7719

5340-66-164-7602

5340-66-164-7952

5340-66-147-8974
Tube

661478974
SL7MILBLK: RNCC: 3 | RNVC: 2
SL7MILBLK: RNCC: 5 | RNVC: 2

5 Dec 2001

5340-66-093-5696
Retaining Strap

660935696
045-047: RNCC: 3 | RNVC: 2
045-047A: RNCC: 3 | RNVC: 2

5 Apr 1984

5340-66-156-4602
Angle Bracket

661564602
15016369-01: RNCC: 3 | RNVC: 2

30 Nov 2007

5340-66-142-5671
Mounting Bracket

661425671
016AMR366-1: RNCC: 3 | RNVC: 2

23 Oct 1996

5340-66-156-2463
Permanent Magnet

661562463
BOOM MAG72: RNCC: 3 | RNVC: 2
STBOOM: RNCC: 5 | RNVC: 2

2 Oct 2007

5340-66-141-6940
Upright Clamp

661416940
D746A1870: RNCC: 3 | RNVC: 2

18 Oct 1996

5340-66-160-2175
Mounting Plate

661602175
BMA-A05-1194: RNCC: 3 | RNVC: 2

1 May 2012

5340-66-146-7014
Mounting Bracket

661467014
1409101: RNCC: 3 | RNVC: 2

17 Aug 2000

5340-66-126-5590
Mounting Plate

661265590
2176050000: RNCC: 3 | RNVC: 2

13 May 1991

5340-66-126-6523
Access Cover

661266523
0313703: RNCC: 3 | RNVC: 2

27 May 1991

5340-66-129-5828
Helical Compression Spring Seat

661295828
10D062948: RNCC: 3 | RNVC: 2

24 Jan 2000

5340-66-157-3363
Retaining Strap

661573363
1000156: RNCC: 3 | RNVC: 2
1000156: RNCC: 5 | RNVC: 2

13 Oct 2008

5340-66-157-7709
Block Clamp

661577709
24082: RNCC: 3 | RNVC: 2

23 Mar 2009

5340-66-033-4321
Access Door Hinge

5340-66-150-2038
Support Hook

661502038
NO PRIMARY REF 66-150-2038: RNCC: 3 | RNVC: 2
06028714: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-147-9392
Male Camlock To Bsp

661479392
AA065: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-66-080-5642
Lock Set

660805642
R40A: RNCC: 3 | RNVC: 2
5340MSMSA0138: RNCC: 5 | RNVC: 9

26 Sep 1974

5340-66-160-8860
Mounting Bracket

661608860
553.10.09.853: RNCC: 3 | RNVC: 2

21 Feb 2013

5340-66-145-4678
Mounting Bracket

661454678
608/2/57740/000: RNCC: 3 | RNVC: 2

23 Sep 1999

5340-66-039-6443
Mounting Plate

660396443
3923MK5: RNCC: 3 | RNVC: 2

28 Apr 1971

5340-66-146-3526
Pin

661463526
240537B: RNCC: 3 | RNVC: 2
240537B: RNCC: 5 | RNVC: 2

13 Apr 2000

5340-66-143-4309
Latch Plate

661434309
492608: RNCC: 3 | RNVC: 2

27 Apr 1998

5340-66-147-4486
Mounting Plate

661474486
0774D05: RNCC: 3 | RNVC: 2
22-0774A-04: RNCC: 3 | RNVC: 2

7 May 2001

5340-66-155-4424
Loop Clamp

661554424
281-01-13180: RNCC: 3 | RNVC: 2
281-01-13180: RNCC: 5 | RNVC: 2

27 Mar 2007

5340-66-157-4132
Mounting Bracket

661574132
ATS138005: RNCC: 3 | RNVC: 2

13 Nov 2008

5340-66-135-3370
Webbing Strap

661353370
DPD 153: RNCC: 3 | RNVC: 1
SSM-6530: RNCC: 3 | RNVC: 2

2 May 1992

5340-66-148-3831
Strap Securi Catch

661483831
02-535: RNCC: 3 | RNVC: 2
Q EDE VHCS 02-535: RNCC: 5 | RNVC: 2

27 Feb 2002

5340-66-126-3034
Access Cover

661263034
75721: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

23 Jan 1991

5340-66-146-3792
Thermostat

661463792
011987: RNCC: 3 | RNVC: 2

19 Apr 2000

5340-66-090-8007

5340-66-033-7005
General Purpose Resilient Mount

5340-66-147-2585
Outer Panel

661472585
DAM6AS(MOD.SX): RNCC: 3 | RNVC: 2

13 Dec 2000

5340-66-152-3771
Double Angle Bracket

661523771
DE251920015: RNCC: 3 | RNVC: 2

14 Oct 2004

5340-66-149-0924
Synchro Clamp

661490924
15000017: RNCC: 3 | RNVC: 2

19 Nov 2002

5340-66-161-1885
General Purpose Resilient Mount

661611885
10008232-05: RNCC: 3 | RNVC: 2

17 Jul 2013

5340-66-034-9233
Retaining Strap

660349233
SAV105E11: RNCC: 3 | RNVC: 2

7 Apr 1960

5340-66-156-6390
Webbing Strap

661566390
08-0300173: RNCC: 3 | RNVC: 2

19 Feb 2008

5340-66-143-7825
Mounting Bracket

661437825
MEA 727-12: RNCC: 3 | RNVC: 2

6 Aug 1997

5340-66-125-4454
Bracket

661254454
SS9049/B102: RNCC: 3 | RNVC: 2

21 Apr 1986

5340-66-142-4633
Mounting Bracket

661424633
516698: RNCC: 3 | RNVC: 2
471-90423-103T10: RNCC: 3 | RNVC: 2

20 Aug 1996

5340-66-147-2506
Drain Hub

661472506
6008503: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-66-146-5164
Cover

661465164
370412-000: RNCC: 3 | RNVC: 2

13 Jun 2000

5340-66-120-6740
Fwd. Hinge Half

661206740
12S1796-11-109: RNCC: 3 | RNVC: 2

13 Oct 1986

5340-66-145-4833
Door Hook

661454833
A21295-47: RNCC: 3 | RNVC: 2

29 Sep 1999

5340-66-150-7838
Multiple Angle Bracket

661507838
LTA-A05-116-001: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-66-155-6399
Locking Wedge

661556399
471-30465-110: RNCC: 3 | RNVC: 2
522380: RNCC: 5 | RNVC: 2

1 May 2007

5340-66-060-0703
Clamping Catch

660600703
0111240: RNCC: 3 | RNVC: 2

22 Jun 1973

5340-66-150-4669
Extension Handle

661504669
NO PRIMARY REF 66-150-4669: RNCC: 3 | RNVC: 2
04531410: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-128-7371
Spacing Threaded Standoff

661287371
630/2/47445/001: RNCC: 3 | RNVC: 2

3 Sep 1993

5340-66-156-2990
Slide Plunger Body

661562990
15007653-01: RNCC: 3 | RNVC: 2

25 Oct 2007

5340-66-065-1277
Ceilin Bracket Assy

5340-66-158-2841
Access Cover

661582841
99001720: RNCC: 3 | RNVC: 2

23 Oct 2009

5340-66-147-7925
Lever Handle

661477925
F/2888-550-033D: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-033D: RNCC: 5 | RNVC: 2

24 Sep 2001

5340-66-155-6042
Support

661556042
471-90422-338: RNCC: 3 | RNVC: 2
519033: RNCC: 5 | RNVC: 2

24 Apr 2007

5340-66-156-1200
Mounting Bracket

661561200
471-90422-207: RNCC: 3 | RNVC: 2
523992: RNCC: 5 | RNVC: 2

31 Aug 2007

5340-66-035-4384
Access Cover

660354384
30-51002-30: RNCC: 3 | RNVC: 2

27 Apr 1970

5340-66-154-8523
Blank Panel

661548523
15010478-10: RNCC: 3 | RNVC: 2

19 Sep 2006

5340-66-154-6823
Access Cover

661546823
VTR251-2TSUB14F4T19-7IIINM40W3P-: RNCC: 3 | RNVC: 1

11 Aug 2006

5340-66-160-2446
Lock Bolt

661602446
0837-002: RNCC: 3 | RNVC: 2
BM050198: RNCC: 5 | RNVC: 2

8 May 2012

5340-66-139-0068
Access Cover

661390068
MYH3560: RNCC: 3 | RNVC: 2

20 Jan 1994

5340-66-138-7059
Loop Clamp

661387059
120270-59410: RNCC: 3 | RNVC: 2

23 Mar 1994

5340-66-160-3251
Mounting Bracket

661603251
BP5685389: RNCC: 3 | RNVC: 2

7 Jun 2012

5340-66-156-4368
Butt Hinge

661564368
15016411: RNCC: 3 | RNVC: 2

26 Nov 2007

5340-66-146-1189
Ratchet Crank Handl

661461189
AH0043: RNCC: 3 | RNVC: 1
AH2369: RNCC: 3 | RNVC: 2

10 May 2005

5340-66-138-9396
Mounting Bracket

661389396
1240-97-151-2669: RNCC: 3 | RNVC: 2

4 Nov 1993

5340-66-128-7248
Mounting Bracket

661287248
HYG2107: RNCC: 3 | RNVC: 2
2590-97-111-6417: RNCC: C | RNVC: 1

12 Aug 1993

5340-66-150-1393
Ear Plug Max-1-D Re

661501393
NO PRIMARY REF 66-150-1393: RNCC: 3 | RNVC: 2
00873443: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-144-7047
Stud Link Chain U2

661447047
WCST-0160-275-U2G: RNCC: 3 | RNVC: 1
WCST-0160-275-U2G: RNCC: 5 | RNVC: 2

10 Dec 1998

5340-66-147-8438
Access Cover

661478438
TAS201/15P: RNCC: 3 | RNVC: 2
TAS201/15P: RNCC: 5 | RNVC: 2

5 Mar 2002

5340-66-158-1547
Mounting Plate

661581547
P10366-100-03: RNCC: 3 | RNVC: 2

7 Sep 2009

5340-66-160-1338
Mounting Bracket

661601338
90-5917-01: RNCC: 3 | RNVC: 2

5 Apr 2012

5340-66-155-1867
Access Cover

661551867
21677-3440: RNCC: 3 | RNVC: 2

3 Jan 2007

5340-66-150-1402
Earplugs Airsoft Co

661501402
NO PRIMARY REF 66-150-1402: RNCC: 3 | RNVC: 2
01079677: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-161-2066
Loop Clamp

661612066
10001179-08: RNCC: 3 | RNVC: 2
TRLC8P: RNCC: 5 | RNVC: 2

24 Jul 2013

5340-66-128-5971
Spring Tension Clip

661285971
HYL9386: RNCC: 3 | RNVC: 2
SDH-1: RNCC: 5 | RNVC: 2

3 Oct 1990

5340-66-158-2750
Mounting Plate

661582750
HYL9308: RNCC: 3 | RNVC: 2

21 Oct 2009

5340-66-156-3882
Mounting Bracket

661563882
15011768: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-66-150-0498
Tee Hinge

661500498
NO PRIMARY REF 66-150-0498: RNCC: 3 | RNVC: 2
03093519: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-151-0962
Mounting Bracket

661510962
LTA-A03-097-001: RNCC: 3 | RNVC: 2

13 May 2003

5340-66-133-5219
Electronic Equipment Hardware Kit

661335219
675/5/35843/000: RNCC: 3 | RNVC: 2
CES13380: RNCC: 3 | RNVC: 2
MX-F309: RNCC: 5 | RNVC: 2

3 Nov 1989

5340-66-152-3768
Assembly Clip Plate

661523768
DE251920012: RNCC: 3 | RNVC: 2

13 Oct 2004

5340-66-146-1920
General Purpose Resilient Mount

661461920
471 8177-11: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-66-120-4506
Nut And Bolt Locking Plate

661204506
87GC212: RNCC: 3 | RNVC: 2
87GC212: RNCC: 3 | RNVC: 2

7 May 1984

5340-66-157-7566
Bow Handle

661577566
1076.50: RNCC: 3 | RNVC: 2

16 Mar 2009

5340-66-146-3471
Breather Assembly

661463471
2386-96340-000: RNCC: 3 | RNVC: 2
2386-96340-000: RNCC: 5 | RNVC: 2

10 Apr 2000

5340-66-161-2756
Access Cover

661612756
D4968-A430: RNCC: 3 | RNVC: 2

19 Aug 2013

5340-66-149-7147
Permanent Magnet

661497147
NO PRIMARY REF 66-149-7147: RNCC: 3 | RNVC: 2
06956608: RNCC: 5 | RNVC: 2

10 Apr 2003

5340-66-146-1947
Mounting Bracket

661461947
472 7308-01: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-66-147-5597
T Handle

661475597
2325-0-004: RNCC: 3 | RNVC: 2

16 Jul 2001

5340-66-146-3251
Left Handle

661463251
2386-43970-00: RNCC: 3 | RNVC: 2
2386-43970-00: RNCC: 5 | RNVC: 2

6 Apr 2000

5340-66-157-4186
Access Cover

661574186
525406: RNCC: 3 | RNVC: 2
471-51805-143-T02: RNCC: 3 | RNVC: 2

14 Nov 2008

5340-66-037-8796
Handwheel

660378796
STDP0302-257: RNCC: 3 | RNVC: 2

14 Jan 1971

5340-66-155-7051
Access Door Hinge

661557051
675/2/38207/001: RNCC: 3 | RNVC: 2

14 May 2007

5340-66-147-2561
Strainer Pan

661472561
DAF251A: RNCC: 3 | RNVC: 2

12 Dec 2000

5340-66-081-9973

5340-66-160-7331
Mounting Bracket

661607331
15011702-1920: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-66-157-8829
Shimmy Damper

661578829
RP400226/A/29: RNCC: 3 | RNVC: 2

1 May 2009

5340-66-120-6303
Bracket

661206303
700-293: RNCC: 3 | RNVC: 2

10 Aug 1984

5340-66-160-3877
Mounting Plate

661603877
ID32-114: RNCC: 3 | RNVC: 2

4 Jul 2012

5340-66-158-8299
Lock-Release Lever

661588299
IS-970G-B: RNCC: 3 | RNVC: 2
P0000700: RNCC: 5 | RNVC: 2

17 Aug 2010

5340-66-156-5878
General Purpose Resilient Mount

661565878
SMB00301004: RNCC: 3 | RNVC: 2
SMB003-0100-4: RNCC: 5 | RNVC: 2
10006947-15: RNCC: 5 | RNVC: 2

29 Jan 2008

5340-66-131-6686
Mounting Bracket

661316686
A62-3299-L-2014: RNCC: 3 | RNVC: 2
REA623299L2014: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-66-150-7844
Multiple Angle Bracket

661507844
LTA-A08-043-001: RNCC: 3 | RNVC: 2

3 Apr 2003

5340-66-147-9281
Isolator Switc Tool

661479281
625/1/03959/000: RNCC: 3 | RNVC: 2

10 Jan 2002

5340-66-068-2191
Shock Mount Pad

660682191
MAM12-8ITEM14: RNCC: 3 | RNVC: 2

8 May 1974

5340-66-157-5506
Loop Clamp

661575506
100517: RNCC: 3 | RNVC: 2
100517: RNCC: 5 | RNVC: 2

16 Dec 2008

5340-66-156-0973
Angle Bracket

661560973
90490: RNCC: 3 | RNVC: 2
90490-TPL77-B12: RNCC: 3 | RNVC: 2

24 Aug 2007

5340-66-134-2503
General Purpose Resilient Mount

661342503
M114-50-FRONT: RNCC: 3 | RNVC: 2

16 Jul 1991

5340-66-014-3779
Hinged Hasp

660143779
365: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-091-8348
Dust And Moisture Seal Protective Cap

660918348
DY1602: RNCC: 3 | RNVC: 2

23 Aug 1976

5340-66-124-3080
Permanent Magnet

661243080
X90: RNCC: 3 | RNVC: 2

12 Sep 1985

5340-66-030-8948
Rod End Clevis

660308948
DA6777016: RNCC: 3 | RNVC: 2

18 Nov 1968

5340-66-153-9584
Mechanical Stop

661539584
M0228FM-CM90-06.00/ITEM:4: RNCC: 3 | RNVC: 2

3 Jan 2006

5340-66-147-7364
Mounting Plate

661477364
BT-0415X046-D: RNCC: 3 | RNVC: 2

31 Jul 2001

5340-66-155-0667
Mounting Bracket

661550667
ADF041-MC8175-105: RNCC: 3 | RNVC: 2

23 Nov 2006

5340-66-156-5231
Mechanical Stop

661565231
471-62810-128: RNCC: 3 | RNVC: 2
501407: RNCC: 5 | RNVC: 2

18 Dec 2007

5340-66-158-3204
Door Handle

661583204
117SCCU3-01: RNCC: 3 | RNVC: 2

9 Nov 2009

5340-66-123-4535
Lever Assy Adu

661234535
33-31495-101: RNCC: 3 | RNVC: 2

13 Dec 1985

5340-66-140-5709
Webbing Strap

661405709
AS/NZS 4380:1996: RNCC: 3 | RNVC: 1
BR50-1-3M: RNCC: 3 | RNVC: 2
O1857 D007-0X03: RNCC: 5 | RNVC: 2
004-127-1: RNCC: 5 | RNVC: 2

28 Jun 1995

5340-66-015-1683
Tee Hinge

5340-66-155-1538
Webbing Strap

661551538
17446511: RNCC: 1 | RNVC: 2
PIU STRAP: RNCC: 3 | RNVC: 2
17446511: RNCC: 5 | RNVC: 2

18 Dec 2006

5340-66-147-2731
Rinse Shaft

661472731
DWS505: RNCC: 3 | RNVC: 2

20 Dec 2000

5340-66-147-7745
Brake Screw

661477745
A5252: RNCC: 3 | RNVC: 2

13 Sep 2001

5340-66-011-6684
Headless Straight Rod

660116684
22RBRBM112: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-128-6314
Webbing Strap

661286314
HYG5686: RNCC: 3 | RNVC: 2

11 Mar 1992

5340-66-031-5636
Spring Tension Clip

660315636
ADE(W)67-1349: RNCC: 3 | RNVC: 2

4 Mar 1969

5340-66-156-5638
Swage To Turnbuckle

661565638
RF1576-0504,WR6119-05,RF1506-050: RNCC: 3 | RNVC: 2

17 Jan 2008

5340-66-151-9412
General Purpose Resilient Mount

661519412
2203804/3: RNCC: 3 | RNVC: 2
2203804/3: RNCC: 5 | RNVC: 2

31 Mar 2004

5340-66-152-5757
Loop Clamp

661525757
RP400019: RNCC: 3 | RNVC: 2

16 Nov 2004

5340-66-121-6359
Mounting Plate

661216359
539.10.09.107: RNCC: 3 | RNVC: 2

2 Dec 1991

5340-66-141-9844
Access Cover

661419844
5581401821: RNCC: 3 | RNVC: 2

2 Feb 1996

5340-66-027-4426
Dust And Moisture Seal Protective Cap

660274426
NA3-2: RNCC: 3 | RNVC: 2
MILC27487: RNCC: 4 | RNVC: 1

1 Jan 1968

5340-66-039-0635
Electrical-Mec Post

660390635
540-9242-003: RNCC: 3 | RNVC: 2

24 Feb 1971

5340-66-088-2928
Butt Hinge

660882928
1213-251734: RNCC: 3 | RNVC: 2
MCCALLUM B6.89: RNCC: 5 | RNVC: 2

20 May 1975

5340-66-059-1537
With Lock Cylinder

660591537
575-2: RNCC: 3 | RNVC: 2

21 May 1973

5340-66-147-8609
Angle Bracket

661478609
F/2888-550-035A: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-035A: RNCC: 5 | RNVC: 2

26 Sep 2001

5340-66-142-9708
Butt Hinge

661429708
658/2/05181/000: RNCC: 3 | RNVC: 2

1 May 1997

5340-66-159-7306
Rod End Connector

661597306
4311-0086: RNCC: 3 | RNVC: 2

17 Jan 2012

5340-66-128-8157
Loop Clamp

661288157
0751-28-001-1112: RNCC: 3 | RNVC: 2
3A TINN: RNCC: C | RNVC: 1

26 Oct 1993

5340-66-150-0262
Swivel Caster

661500262
NO PRIMARY REF 66-150-0262: RNCC: 3 | RNVC: 2
04922508: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-146-2022
Mounting Bracket

661462022
472 8194-02: RNCC: 3 | RNVC: 2

11 Feb 2000

5340-66-158-6798
Mounting Bracket

661586798
RAY184019-1: RNCC: 3 | RNVC: 2
RAY184019-1: RNCC: 5 | RNVC: 2

3 Jun 2010

5340-66-147-6476
Dust And Moisture Seal Protective Cap

661476476
A53-997-B2180-0E00: RNCC: 3 | RNVC: 2

18 Oct 2001

5340-66-147-5219
Carabiner Set

661475219
OP 1200AN: RNCC: 3 | RNVC: 2

11 Jun 2001

5340-66-158-6931
Mounting Bracket

661586931
503 76 65-03: RNCC: 3 | RNVC: 2
503 76 65-03: RNCC: 5 | RNVC: 2

9 Jun 2010

5340-66-139-5462
Angle Bracket

661395462
RA-CD-001: RNCC: 3 | RNVC: 2

7 Jun 1994

5340-66-153-3529
Mounting Bracket

661533529
NMX-10-18-14-13-00: RNCC: 3 | RNVC: 2
NMX-10-18-14-13-00: RNCC: 5 | RNVC: 2

21 Jul 2005

5340-66-146-5129
Mounting Bracket

661465129
N500-4S-557: RNCC: 3 | RNVC: 2

8 Jun 2000

5340-66-156-9247
Dust And Moisture Seal Protective Cover

661569247
471-42636-3: RNCC: 3 | RNVC: 2
525300: RNCC: 5 | RNVC: 2

4 Jun 2008

5340-66-149-9444
Retaining Strap

661499444
NO PRIMARY REF 66-149-9444: RNCC: 3 | RNVC: 2
02416052: RNCC: 5 | RNVC: 2

10 Apr 2003

5340-66-160-3593
Mechanic Equipment Hardware Kit

661603593
1749810: RNCC: 3 | RNVC: 2

25 Jun 2012

5340-66-147-7935
Angle Bracket

661477935
F/2888-550-035G: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-035G: RNCC: 5 | RNVC: 2

24 Sep 2001

5340-66-132-9017
Mounting Bracket

5340-66-049-4141
Angle Bracket

660494141
ADE(W)114-125: RNCC: 3 | RNVC: 2

30 Jul 1975

5340-66-155-0247
Retaining Strap

661550247
471-40213-104: RNCC: 3 | RNVC: 2
504788: RNCC: 5 | RNVC: 2

15 Nov 2006

5340-66-158-9843
Lock Bar

661589843
4001 23 002-11: RNCC: 3 | RNVC: 2

19 Nov 2010

5340-66-157-2784
Mounting Bracket

661572784
BMU-A05-2022-01: RNCC: 3 | RNVC: 2

24 Sep 2008

5340-66-158-9424
General Purpose Access Door

661589424
15018681: RNCC: 3 | RNVC: 2

3 Nov 2010

5340-66-147-3989
Mounting Bracket

661473989
1031266000: RNCC: 3 | RNVC: 2

2 May 2001

5340-66-157-9106
Access Hole Frame

661579106
557.22.09.292: RNCC: 3 | RNVC: 2

13 May 2009

5340-66-148-3558
Antipilferage Seal

661483558
HA03312: RNCC: 3 | RNVC: 2

3 Jan 2002

5340-66-155-6963
Mounting Bracket

661556963
16059: RNCC: 3 | RNVC: 2

11 May 2007

5340-66-050-8367
Plate And Bus Hinge

660508367
C4WM1215-1: RNCC: 3 | RNVC: 2

20 May 1972

5340-66-138-9264
Spacing Threaded Standoff

661389264
630/2/47445/002: RNCC: 3 | RNVC: 2

29 Oct 1993

5340-66-146-9316
Connection Bell

661469316
MHB-160-3: RNCC: 3 | RNVC: 2

10 Oct 2000

5340-66-147-2900
Pressure Vessel

661472900
E8H: RNCC: 3 | RNVC: 2

11 Oct 2001

5340-66-010-9172
Expansion Plug

1 Jan 1968

5340-66-160-8779
Dust And Moisture Seal Protective Cap-Plug Set

661608779
DZP300T PART83: RNCC: 3 | RNVC: 2
SML001406: RNCC: 5 | RNVC: 2

19 Feb 2013

5340-66-024-0144
Mounting Plate

660240144
ADE(W)28-43: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-154-6068
Interface Plate

661546068
008-01960-001: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-66-144-1448
Mounting Bracket

661441448
MH-A713-0008-A5: RNCC: 3 | RNVC: 2

13 Jul 2000

5340-66-157-2960
Double Angle Bracket

661572960
10053160: RNCC: 3 | RNVC: 2

30 Sep 2008

5340-66-156-3758
Bumper

661563758
10001437-07: RNCC: 3 | RNVC: 2
0007 2080: RNCC: 5 | RNVC: 2

13 Nov 2007

5340-66-028-8747
Vent Plug

660288747
AW756: RNCC: 3 | RNVC: 2
P12105: RNCC: 3 | RNVC: 2
858116R1: RNCC: 5 | RNVC: 2
2284212: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-66-154-8786
Extension Drawer Slide

661548786
15011702-3050: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-66-159-3108
Dust And Moisture Seal Protective Plug

661593108
4916-4407: RNCC: 3 | RNVC: 2
4916-4407: RNCC: 5 | RNVC: 2

2 Jun 2011

5340-66-158-4352
Mounting Bracket

661584352
DRG. NO. 11-5003: RNCC: 3 | RNVC: 2
MC-0652: RNCC: 3 | RNVC: 2

18 Jan 2010

5340-66-157-4655
Mounting Plate

661574655
V02-06-02-01-00: RNCC: 3 | RNVC: 2

26 Nov 2008

5340-66-038-2466
Retaining Strap

5340-66-058-2986
Access Cover

5340-66-153-2684
Mounting Bracket

661532684
A210 0086-1: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-157-1168
Access Cover

661571168
ARLM1015-1: RNCC: 3 | RNVC: 2

1 Aug 2008

5340-66-128-4621
Webbing Strap

661284621
HYG2521: RNCC: 3 | RNVC: 2

25 Nov 1987

5340-66-160-7822
Corrosion Preventive Anode

661607822
MAKB14: RNCC: 3 | RNVC: 2

7 Dec 2012

5340-66-156-5002
Turnbuckle

661565002
DA 011: RNCC: 3 | RNVC: 2

12 Dec 2007

5340-66-034-1669
Headless Straight Rod

660341669
27X1 1-2IN: RNCC: 3 | RNVC: 2

19 Dec 1969

5340-66-011-5241
Rod End Clevis

660115241
22RBBR106: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-144-9712
Handwheel

661449712
MHC016: RNCC: 3 | RNVC: 2

9 Jun 1999

5340-66-138-8291
Manual Control Lever

661388291
XNA125702: RNCC: 3 | RNVC: 2

19 Apr 1994

5340-66-104-2019
Rod End Clevis

5340-66-106-0160
Buckle

5340-66-105-3230

5340-66-024-0904
Webbing Strap

660240904
ADE(M)427-1: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-155-0841
Mounting Bracket

661550841
17445705: RNCC: 3 | RNVC: 2
17445705: RNCC: 5 | RNVC: 2

28 Nov 2006

5340-66-155-1560
Retainer Knob

661551560
17446504: RNCC: 3 | RNVC: 2

18 Dec 2006

5340-66-143-3655
Indicator Plate

661433655
142436: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-66-144-0359
Door Handle Cover

661440359
504 07560: RNCC: 3 | RNVC: 2

21 Nov 1997

5340-66-141-2136
Mounting Bracket

661412136
88.8281.5385: RNCC: 3 | RNVC: 2

25 Oct 1995

5340-66-123-1945
Expansion Plug

661231945
9232-2511-40: RNCC: 3 | RNVC: 2

2 Oct 1985

5340-66-059-8154
Sash Sheave Block

660598154
TT400: RNCC: 3 | RNVC: 2

22 Jun 1973

5340-66-147-4178
Mounting Bracket

661474178
CX25-1-M33-0: RNCC: 3 | RNVC: 2

8 May 2001

5340-66-153-9400
Webbing Strap

661539400
BDI D17500-7: RNCC: 3 | RNVC: 2

19 Dec 2005

5340-66-135-5182
Caster Wheel

661355182
L844PU: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

24 Mar 1992

5340-66-156-5544
Block Clamp

661565544
80-4086-32-1 SUBASSY WHITE: RNCC: 3 | RNVC: 2
1082498: RNCC: 5 | RNVC: 2

15 Jan 2008

5340-66-158-7453
Mounting Bracket

661587453
V058-ME-2201: RNCC: 3 | RNVC: 2
V0508-ME-2201: RNCC: 5 | RNVC: 2

22 Jul 2010

5340-66-158-5602
Access Cover

661585602
P10104-06: RNCC: 3 | RNVC: 2

25 Mar 2010

5340-66-160-5744
Angle Bracket

661605744
112.35.07.451: RNCC: 3 | RNVC: 2

7 Sep 2012

5340-66-021-5810
Flush Catch

660215810
162257R1: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

1 Jan 1968

5340-66-145-9507
Lock Plate

661459507
F/2888-525-002H: RNCC: 3 | RNVC: 2
Q EDE F/2888-525-002H: RNCC: 5 | RNVC: 2

16 Oct 2001

5340-66-155-9032
Bumper

661559032
471-50817-112: RNCC: 3 | RNVC: 2
504517: RNCC: 5 | RNVC: 2

27 Jun 2007

5340-66-135-2775
General Purpose Resilient Mount

661352775
M187-40: RNCC: 3 | RNVC: 2
10400222: RNCC: 5 | RNVC: 2

30 Jan 1992

5340-66-156-5124
Access Cover

661565124
CDA-A19-3036-01: RNCC: 3 | RNVC: 2

17 Dec 2007

5340-66-128-5023
Double Angle Bracket

661285023
AYG2686: RNCC: 3 | RNVC: 2

19 Jan 1988

5340-66-074-8547
Dust And Moisture Seal Protective Cap

660748547
RANTE21761: RNCC: 3 | RNVC: 2

25 Jun 1974

5340-66-132-4804
Friction Catch

661324804
228144-1: RNCC: 3 | RNVC: 2

28 Mar 1990

5340-66-159-8816
Support Hook

661598816
1073.10: RNCC: 3 | RNVC: 1
1073.10-P1: RNCC: 3 | RNVC: 2
QVRL107310P1: RNCC: 5 | RNVC: 2
1073.10: RNCC: 6 | RNVC: 9
1073.10-P1: RNCC: 6 | RNVC: 9

7 Mar 2012

5340-66-150-5768
General Purpose Resilient Mount

661505768
NO PRIMARY REF 66-150-5768: RNCC: 3 | RNVC: 2
08730903: RNCC: 5 | RNVC: 2

16 Apr 2003

5340-66-143-3657
Locating Pin

661433657
142443: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-66-158-8745
Pipe Saddle

661588745
1373365: RNCC: 3 | RNVC: 2

16 Sep 2010

5340-66-102-4602
Retaining Strap

661024602
EK004-2: RNCC: 3 | RNVC: 2

28 Nov 1979

5340-66-150-7845
Multiple Angle Bracket

661507845
LTA-A10-022-001: RNCC: 3 | RNVC: 2

3 Apr 2003

5340-66-151-1039
Mounting Bracket

661511039
LTA-A08-0065-01: RNCC: 3 | RNVC: 2
LTA-A08-0065: RNCC: 5 | RNVC: 2

27 May 2003

5340-66-156-2607
Manual Control Handle

661562607
471-90429-700: RNCC: 3 | RNVC: 2
502096: RNCC: 5 | RNVC: 2

10 Oct 2007

5340-66-160-3387
General Purpose Access Door

661603387
BMA-A05-0969-03: RNCC: 3 | RNVC: 2

18 Jun 2012

5340-66-032-8838
Electrical-Mec Post

660328838
4910-27: RNCC: 3 | RNVC: 2

25 Jul 1969

5340-66-135-7049
Angle Bracket

661357049
7LV-11940-00: RNCC: 3 | RNVC: 2

2 Jan 1992

5340-66-152-1590
Webbing Strap

661521590
434105A: RNCC: 3 | RNVC: 2

31 Jul 2004

5340-66-122-6851
Expansion Plug

661226851
79AX66Z: RNCC: 3 | RNVC: 2
79AX66Z: RNCC: 3 | RNVC: 2

16 Oct 1984

5340-66-152-3770
As Extended Bracket

661523770
DE251920014: RNCC: 3 | RNVC: 2

13 Oct 2004

5340-66-143-6434
Electronic Equipment Hardware Kit

661436434
MX-F339: RNCC: 3 | RNVC: 2
DE530020039: RNCC: 3 | RNVC: 2
DE530020039: RNCC: 3 | RNVC: 2

7 Oct 1997

5340-66-155-9859
Mounting Plate

661559859
AG-A0417: RNCC: 3 | RNVC: 2

19 Jul 2007

5340-66-152-3819
Loop Clamp

661523819
C12: RNCC: 3 | RNVC: 2
15009447: RNCC: 3 | RNVC: 2
C12: RNCC: 5 | RNVC: 2
CZP 063: RNCC: 5 | RNVC: 2

16 Oct 2004

5340-66-154-6949
Mounting Plate

661546949
DE252580010: RNCC: 3 | RNVC: 2

15 Aug 2006

5340-66-152-4303
Stand Base

661524303
434010A: RNCC: 3 | RNVC: 2

2 Dec 2004

5340-66-160-6716
Dust And Moisture Seal Protective Plug

661606716
220S20: RNCC: 3 | RNVC: 2
HSA004699: RNCC: 5 | RNVC: 2
220S20: RNCC: 5 | RNVC: 2

10 Oct 2012

5340-66-146-7837
Loop Clamp

661467837
LARC 0905: RNCC: 3 | RNVC: 2
LARC 0905: RNCC: 5 | RNVC: 2

25 Sep 2000

5340-66-033-4733
Manual Contro Lever

5340-66-119-3608
General Purpose Resilient Mount

661193608
912102-5: RNCC: 3 | RNVC: 2

27 Oct 1983

5340-66-145-6567
Synchro Clamp

661456567
200027.02: RNCC: 3 | RNVC: 2
200027.02: RNCC: 5 | RNVC: 2

23 Nov 1999

5340-66-128-3910
Dust And Moisture Seal Boot

661283910
D89325: RNCC: 3 | RNVC: 2

27 Apr 1987

5340-66-155-6409
Handwheel

661556409
471-30429-601: RNCC: 3 | RNVC: 2
519343: RNCC: 5 | RNVC: 2

1 May 2007

5340-66-145-5799
Antenna Plate

661455799
DE250980318: RNCC: 3 | RNVC: 2

7 Oct 1999

5340-66-109-6401
Swivel Caster

661096401
6336: RNCC: 3 | RNVC: 2
L530: RNCC: C | RNVC: 1

4 Feb 1981

5340-66-142-8000
Bracket Set

661428000
DE250530370: RNCC: 3 | RNVC: 2

2 Nov 1996

5340-66-159-6444
Dust And Moisture Seal Protective Cover

661596444
049123A-00: RNCC: 3 | RNVC: 2

21 Nov 2011

5340-66-156-9383
Turnbuckle Body

661569383
828457: RNCC: 3 | RNVC: 2

11 Jun 2008

5340-66-111-0062

5340-66-106-0165
Strap End Clip

5340-66-154-7387
Webbing Strap

661547387
10006012-080: RNCC: 3 | RNVC: 2
10006012-080: RNCC: 5 | RNVC: 2

25 Aug 2006

5340-66-155-0963
Mounting Plate

661550963
275J-0274: RNCC: 3 | RNVC: 2

30 Nov 2006

5340-66-037-4136
General Purpose Resilient Mount

660374136
M179: RNCC: 3 | RNVC: 2

27 Sep 1970

5340-66-110-4408
Dust And Moisture Seal Protective Plug

661104408
100843: RNCC: 3 | RNVC: 2
944.87.75.106: RNCC: 5 | RNVC: 2

2 Apr 1992

5340-66-125-3183
General Purpose Access Door

661253183
DE580160616: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

7 Mar 1986

5340-66-160-3283
Mounting Bracket

661603283
BMA-A07-0786-01: RNCC: 3 | RNVC: 2

12 Jun 2012

5340-66-139-4466
Electronic Equipment Hardware Kit

661394466
MX-F220: RNCC: 3 | RNVC: 2
DE530020004: RNCC: 3 | RNVC: 2

25 Jan 1995

5340-66-150-5294
Cleaning Station

661505294
NO PRIMARY REF 66-150-5294: RNCC: 3 | RNVC: 2
04515663: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-142-3446
Access Door Hinge

661423446
024AMR041: RNCC: 3 | RNVC: 2
024AMR041-1: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-66-153-2739
Mounting Bracket

661532739
A210 0323: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-154-9618
Loop Clamp

661549618
ARLM0781-1: RNCC: 3 | RNVC: 2

24 Oct 2006

5340-66-159-5282
Locking Stay

661595282
1100-03-0200A6: RNCC: 3 | RNVC: 2
QVRL1100030200A6: RNCC: 5 | RNVC: 2
1100-03-0200A6: RNCC: 6 | RNVC: 9

30 Aug 2011

5340-66-153-6682
Webbing Strap

661536682
9125D05045001-002: RNCC: 3 | RNVC: 2

11 Oct 2005

5340-66-139-2379
Spacing Threaded Standoff

661392379
704/2/11418: RNCC: 3 | RNVC: 2

4 Aug 1994

5340-66-151-2299
Retainer

661512299
7FA1000A08G24: RNCC: 3 | RNVC: 2

15 Oct 2003

5340-66-097-8830
Spring Tension Clip

660978830
X: RNCC: 3 | RNVC: 2

26 May 1978

5340-66-155-8834
Dirt And Liquid Deflector

661558834
2216 8001-4: RNCC: 3 | RNVC: 2

25 Jun 2007

5340-66-034-3038
Dust And Moist Boot

5340-66-154-9617
Loop Clamp

661549617
ARLM0780-1: RNCC: 3 | RNVC: 2

24 Oct 2006

5340-66-135-2733
Dust And Moisture Seal Protective Cap

661352733
5657-4: RNCC: 3 | RNVC: 2
38260897: RNCC: 5 | RNVC: 2

17 Jan 1992

5340-66-158-4445
Mounting Plate

661584445
TF01777-1: RNCC: 3 | RNVC: 2

21 Jan 2010

5340-66-038-5413
Access Cover

660385413
B2135: RNCC: 3 | RNVC: 2

18 Dec 1970

5340-66-158-0214
Angle Bracket

661580214
F1854ASM467-002: RNCC: 3 | RNVC: 2
00006721: RNCC: 5 | RNVC: 2

23 Jun 2009

5340-66-126-2856
General Purpose Resilient Mount

661262856
6G5-82317-00: RNCC: 3 | RNVC: 2
6G5-82317-00: RNCC: 3 | RNVC: 2

16 Jan 1991

5340-66-155-8570
Access Cover

661558570
471-60803-104: RNCC: 3 | RNVC: 2
504061: RNCC: 5 | RNVC: 2

18 Jun 2007

5340-66-148-4839
Crankca Outlet Tube

661484839
OED-1647: RNCC: 3 | RNVC: 2

14 May 2002

5340-66-142-9614
Mounting Bracket

661429614
AS 1204: RNCC: 3 | RNVC: 1
658/2/06425/004: RNCC: 3 | RNVC: 2

20 Mar 1997

5340-66-146-3906
Panel Sub-Assembly

661463906
73212-1-02: RNCC: 3 | RNVC: 2

20 Apr 2000

5340-66-142-9631
Conduit Clamp

661429631
658/2/05809/000: RNCC: 3 | RNVC: 2

1 Apr 1997

5340-66-142-9115
Rivet Plate

661429115
658/2/05361/000: RNCC: 3 | RNVC: 2

3 Mar 1997

5340-66-131-4955
Loop Clamp

661314955
367865C1: RNCC: 3 | RNVC: 2

3 Nov 1988

5340-66-130-8108
Mounting Bracket

661308108
016AMR238-1: RNCC: 3 | RNVC: 2

15 Jun 1988

5340-66-158-6009
Mounting Plate

661586009
DE253290037: RNCC: 3 | RNVC: 2

9 Apr 2010

5340-66-128-6317
Webbing Strap

661286317
HYG3676: RNCC: 3 | RNVC: 2

11 Mar 1992

5340-66-146-3796
Handle Tube

661463796
014345: RNCC: 3 | RNVC: 2

19 Apr 2000

5340-66-135-1878
Clamp

661351878
23726.000: RNCC: 3 | RNVC: 2

24 Sep 1991

5340-66-160-2501
Mounting Plate

661602501
DE490260000-1: RNCC: 3 | RNVC: 2

9 May 2012

5340-66-157-4926
Angle Bracket

661574926
NALM00705-1: RNCC: 3 | RNVC: 2

1 Dec 2008

5340-66-139-6686
Mechanic Equipment Hardware Kit

661396686
56W4-S103 PC23: RNCC: 3 | RNVC: 1
56W4-S103 PC23: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-66-161-2644
Cushioning Pad

661612644
1600-02-0103C3-02: RNCC: 3 | RNVC: 2
QVRL1600020103C302: RNCC: 5 | RNVC: 2

12 Aug 2013

5340-66-132-1862
Handwheel

661321862
3640-9 MOD 611: RNCC: 3 | RNVC: 2

12 Jul 1989

5340-66-147-4536
Dust And Moisture Seal Boot

661474536
F/2888-535-002P: RNCC: 3 | RNVC: 2
Q EDE F/2888-535-002P: RNCC: 5 | RNVC: 2

7 May 2001

5340-66-099-1466
Dust And Moisture Seal Protective Cap-Plug

660991466
G4BD101: RNCC: 3 | RNVC: 2

5 Oct 1978

5340-66-161-3507
Mounting Bracket

661613507
S74702: RNCC: 3 | RNVC: 2
S74702: RNCC: 5 | RNVC: 2

18 Sep 2013

5340-66-127-8430
Retaining Strap

661278430
EX20032284: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-66-019-5755
Barrel Bolt

5340-66-148-5045
Metal Grille

661485045
OED-1749-18-19: RNCC: 3 | RNVC: 2

20 May 2002

5340-66-154-7761
Mounting Plate

661547761
15004007: RNCC: 3 | RNVC: 2

4 Sep 2006

5340-66-086-8667
Friction Catch Stud Receptacle

660868667
FWV10420: RNCC: 3 | RNVC: 2

27 Jun 1975

5340-66-146-3673
Webbing Strap

661463673
240591A-510: RNCC: 3 | RNVC: 2

13 Apr 2000

5340-66-155-6397
Mounting Bracket

661556397
X50QK462M: RNCC: 3 | RNVC: 2

1 May 2007

5340-66-150-0632
Padlock

661500632
NO PRIMARY REF 66-150-0632: RNCC: 3 | RNVC: 2
03381613: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-144-7301
Mounting Bracket

661447301
MHC1325-2: RNCC: 3 | RNVC: 2

21 Jan 1999

5340-66-138-8208
Mounting Bracket

661388208
196640-03350-1: RNCC: 3 | RNVC: 2

21 Apr 1994

5340-66-139-8219
Angle Bracket

661398219
1/B2-20-204: RNCC: 3 | RNVC: 2

23 Aug 1994

5340-66-120-3943
Webbing Strap

661203943
DE580180847-1: RNCC: 3 | RNVC: 2

5 May 1984

5340-66-099-8522

5340-66-106-8725

5340-66-028-5366
Air Blanking Cover

660285366
CA30021: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-157-6324
Mounting Bracket

661576324
DE253280069: RNCC: 3 | RNVC: 2

23 Jan 2009

5340-66-051-7692
Access Cover

660517692
M92A: RNCC: 3 | RNVC: 2

31 Jul 1972

5340-66-152-5014
General Purpose Access Door

661525014
12755565: RNCC: 3 | RNVC: 2

22 Feb 2005

5340-66-096-5084
Mower Hardware Kit

660965084
000673: RNCC: 3 | RNVC: 2

8 Feb 1978

5340-66-103-6319
Dust And Moisture Seal Protective Cap

661036319
DA72302000: RNCC: 3 | RNVC: 2
DA72302000: RNCC: 5 | RNVC: 2
DA72302000: RNCC: 5 | RNVC: 9

18 Jan 1970

5340-66-135-0372
Mounting Plate

661350372
400114007L: RNCC: 3 | RNVC: 2

12 Feb 1991

5340-66-160-7836
Mounting Bracket

661607836
15017117: RNCC: 3 | RNVC: 2

10 Dec 2012

5340-66-077-9308
Buckle

660779308
12-50024: RNCC: 3 | RNVC: 2

20 Oct 1974

5340-66-125-2430
Rubber Shield

661252430
M189-50DUROMETER: RNCC: 3 | RNVC: 2

11 Dec 1985

5340-66-147-8906
Cable Clamp

661478906
31509: RNCC: 3 | RNVC: 2
Q EDE HYCC/31509: RNCC: 5 | RNVC: 2

3 Dec 2001

5340-66-144-5265
Mounting Bracket

661445265
A20914A-10/2: RNCC: 3 | RNVC: 2

4 Dec 1998

5340-66-142-9629
Retaining Strap

661429629
658/1/06022/001: RNCC: 3 | RNVC: 2
658/2/06022/001: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-66-140-5603
Butt Hinge

661405603
R/H BUTTHINGE: RNCC: 3 | RNVC: 1
96-50-510-50: RNCC: 5 | RNVC: 2
96-50-510-50: RNCC: 5 | RNVC: 2
96-50-510-50: RNCC: 5 | RNVC: 2

12 Apr 1995

5340-66-157-4983
Mounting Plate

661574983
V01-01-15-01-01: RNCC: 3 | RNVC: 2

2 Dec 2008

5340-66-155-5710
Air Inlet-Outlet Frame

661555710
P3010-109-1: RNCC: 3 | RNVC: 2
P3010-101-22: RNCC: 5 | RNVC: 2

17 Apr 2007

5340-66-045-6050
Retaining Clip

660456050
DA67163040: RNCC: 3 | RNVC: 2

16 Nov 1972

5340-66-134-1372

5340-66-155-2337
Rope Cleat

661552337
AWD01-82-061-001: RNCC: 3 | RNVC: 2

31 Jan 2007

5340-66-129-0059
Access Cover

661290059
163P-0320-028: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-66-138-9585
Clamp

661389585
4355050089: RNCC: 3 | RNVC: 2
0064-35-505-0089: RNCC: C | RNVC: 1

12 Nov 1993

5340-66-153-3528
Mounting Plate

661533528
NMX-10-18-14-13-04-LSR: RNCC: 3 | RNVC: 2
NMX-10-18-14-13-04-LSR: RNCC: 5 | RNVC: 2

21 Jul 2005

5340-66-146-3907
Lever Arm

661463907
73212-3-15: RNCC: 3 | RNVC: 2

3 May 2000

5340-66-106-0881
Angle Bracket

661060881
611351: RNCC: 3 | RNVC: 2

28 Jul 1980

5340-66-146-9576
Star Coupling Guard

661469576
AC409: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-66-142-0005
General Purpose Resilient Mount

661420005
90257: RNCC: 3 | RNVC: 2

9 Feb 1996

5340-66-158-1587
Mounting Bracket

661581587
BAR-BR-002: RNCC: 3 | RNVC: 2

8 Sep 2009

5340-66-054-2239
Nonmetallic Bumper

660542239
RX59F: RNCC: 3 | RNVC: 2
678-083002: RNCC: 5 | RNVC: 2

28 Jul 1972

5340-66-064-4055
Mortise Lock Set

660644055
L0CKSET540TUBULARLATCH552: RNCC: 3 | RNVC: 2

21 Jun 1974

5340-66-144-6196
Webbing Strap

661446196
AS/NZS 4380:1996: RNCC: 3 | RNVC: 1
00-240503A-50: RNCC: 3 | RNVC: 2
11-240503A-50: RNCC: 3 | RNVC: 2
01151C1S: RNCC: 5 | RNVC: 2

14 Jan 1999

5340-66-150-2469
Hasp Staple

661502469
NO PRIMARY REF 66-150-2469: RNCC: 3 | RNVC: 2
04061207: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-140-5450
Electronic Equipment Hardware Kit

661405450
418/5/57434/000: RNCC: 3 | RNVC: 2
MX-F140: RNCC: 5 | RNVC: 2

12 Apr 1995

5340-66-161-0492
Webbing Strap

661610492
WAS01: RNCC: 3 | RNVC: 2
WAS01: RNCC: 5 | RNVC: 2

3 May 2013

5340-66-161-2537
Mounting Plate

661612537
BP5685730: RNCC: 3 | RNVC: 2

8 Aug 2013

5340-66-156-3916
Double Angle Bracket

661563916
15013123: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-66-156-9170
Mounting Bracket

661569170
BMA-A05-1669-01: RNCC: 3 | RNVC: 2

30 May 2008

5340-66-154-8849
Angle Bracket

661548849
15012176: RNCC: 3 | RNVC: 2

28 Sep 2006

5340-66-149-1522
Slide Track

661491522
12756602-02: RNCC: 3 | RNVC: 2

19 Feb 2003

5340-66-147-2390
Dust And Moisture Seal Protective Cap

661472390
32842176: RNCC: 3 | RNVC: 2
634B-80MM-BRONZE: RNCC: 3 | RNVC: 2

11 Dec 2000

5340-66-155-3093
Machine Flute

661553093
514334: RNCC: 3 | RNVC: 2

26 Feb 2007

5340-66-158-3708
Dust And Moisture Seal Protective Cover

661583708
79500686: RNCC: 3 | RNVC: 2

30 Nov 2009

5340-66-144-8750
Mounting Bracket

661448750
14221/16/022: RNCC: 3 | RNVC: 2

16 Apr 1999

5340-66-147-6474
Dust And Moisture Seal Protective Cap

661476474
A55-997-B2180-0C00: RNCC: 3 | RNVC: 2
A53-997-B2180-0C00: RNCC: 5 | RNVC: 2

18 Oct 2001

5340-66-154-6846
Angle Bracket

661546846
VTR251-2TSUB14F4T19-7IIINM40W3P-: RNCC: 3 | RNVC: 1

14 Aug 2006

5340-66-155-1696
Mounting Bracket

661551696
BMA-A18-0052-01: RNCC: 3 | RNVC: 2

19 Dec 2006

5340-66-160-9039
Angle Bracket

661609039
10000160-4: RNCC: 3 | RNVC: 2

28 Feb 2013

5340-66-057-7882
Dust And Moisture Seal Protective Cap

660577882
GP7961: RNCC: 3 | RNVC: 2
BA72699: RNCC: C | RNVC: 1

8 Jun 1973

5340-66-032-7805
Catch Strike

5340-66-085-7761
Manual Control Lever

660857761
6442: RNCC: 3 | RNVC: 2

27 Feb 1975

5340-66-160-7848
Multiple Angle Bracket

661607848
15019559: RNCC: 3 | RNVC: 2

10 Dec 2012

5340-66-153-3136
Mounting Plate

661533136
DE252200011: RNCC: 3 | RNVC: 2

12 Jul 2005

5340-66-128-4525
Line Supporting Strap

661284525
AFU4173: RNCC: 3 | RNVC: 2

9 Nov 1987

5340-66-093-2627
Retaining Band

5340-66-092-9644

5340-66-160-8493
Support Hook

661608493
1126.01-P2: RNCC: 3 | RNVC: 2

6 Feb 2013

5340-66-027-6414

5340-66-011-6686
Headle Straight Rod

5340-66-134-4829
Mounting Bracket

661344829
9N2583: RNCC: 3 | RNVC: 2

29 Oct 1991

5340-66-146-3508
Strap

661463508
240488A-60: RNCC: 3 | RNVC: 2

12 Apr 2000

5340-66-158-7091
Mounting Plate

661587091
RBP33: RNCC: 3 | RNVC: 2

22 Jun 2010

5340-66-088-5432
Transit Stayplate

660885432
5591761: RNCC: 3 | RNVC: 2

14 Jun 1975

5340-66-156-5215
Mounting Plate

661565215
471-62810-125: RNCC: 3 | RNVC: 2
501404: RNCC: 5 | RNVC: 2

18 Dec 2007

5340-66-066-4577
General Purpose Resilient Mount

660664577
P128-72RB: RNCC: 3 | RNVC: 2

12 Dec 1973

5340-66-116-8181
Locking Plug

661168181
EX2000101/2: RNCC: 3 | RNVC: 2

21 Feb 1984

5340-66-160-3008
Angle Bracket

661603008
ARLM0799-1: RNCC: 3 | RNVC: 2

30 May 2012

5340-66-150-2022
Support Hook

661502022
NO PRIMARY REF 66-150-2022: RNCC: 3 | RNVC: 2
04067706: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-147-9409
Female Camlock To H

661479409
AC080: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-66-161-2950
Mounting Bracket

661612950
15019037: RNCC: 3 | RNVC: 2

26 Aug 2013

5340-66-021-1608
Rim Lock

5340-66-066-8880
Plain Solid Disk

660668880
MC66: RNCC: 3 | RNVC: 2

9 May 1974

Load More Results