What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is a Hasp Staple?

A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

Hardware, Commercial - Australia (AU)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Australia (AU) - NCB is 66

Page 3 of 29

NSN Format for Hardware, Commercial
Codified by Australia

53	40	66	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Australia (AU)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 53 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 78 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 109 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 25 Items
Holder,Spring 26 Items
What is a Compression Cup? 11 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 43 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 85 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 54 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 27 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 249 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 36 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 87 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 39 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 11 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 16 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 15 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Rim Latch? 18 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Rim Lock? 13 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 12 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 17 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 17 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 18 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 103 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 11 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 59 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 14 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 14 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Plug Button? 12 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Corrosion Preventive Anode? 27 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 78 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 268 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 88 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 70 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 36 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 40 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 41 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Plain Solid Disk? 41 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 12 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 608 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 57 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 54 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 317 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 48 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 40 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 83 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Quick Release Plunger? 17 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 65 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 24 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 14 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 22 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 49 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 19 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 151 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 15 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 444 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 128 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 42 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 53 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 25 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 201 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 33 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 133 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 42 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 54 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Strapping? 28 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 75 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Screw Thread Insert And Tool Assortment? 18 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 28 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 18 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 740 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 11 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 14 Items
What is an Antipilferage Seal? 27 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 129 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Seal Retaining Plate? 29 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 47 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1862 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 15 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 11 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 10 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 766 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 27 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 65 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 79 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 71 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 22 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 12 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 14 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 35 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 50 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 28 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 15 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 20 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 11 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 83 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 138 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 393 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 38 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 11 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 22 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
What is a Key Blank? 22 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 10 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 114 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 11 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 20 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 12 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is a Bumper? 74 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 3 of 29

5340-66-151-7397
Access Cover

661517397
BHE 03018: RNCC: 3 | RNVC: 2

9 Jan 2004

5340-66-149-0918
Mounting Bracket

661490918
15000010: RNCC: 3 | RNVC: 2

18 Nov 2002

5340-66-128-5598
Hose Clip

661285598
8941345750: RNCC: 3 | RNVC: 2
8941345750: RNCC: 5 | RNVC: 2

4 Aug 1989

5340-66-161-2805
Webbing Strap

661612805
10006012-120: RNCC: 3 | RNVC: 2

20 Aug 2013

5340-66-133-6787
Butt Hinge

5340-66-133-6797
Spring Tension Clip

5340-66-149-5713

5340-66-015-3288
Buckle

5340-66-132-7381
Mending Plate

5340-66-132-5398

5340-66-144-5927
Security Seal

661445927
BM0000 1/16 DIA CABLE 12 INCH: RNCC: 3 | RNVC: 2

22 Dec 1998

5340-66-093-1709
Retaining Strap

660931709
ADE(V)94-574: RNCC: 3 | RNVC: 2
CA62-12: RNCC: 5 | RNVC: 2

23 Feb 1977

5340-66-151-0626
Multiple Angle Bracket

661510626
LTA-A05-118-001: RNCC: 3 | RNVC: 2

24 Apr 2003

5340-66-143-0970
Door Handle

661430970
M14 AND L38: RNCC: 3 | RNVC: 2

2 May 1997

5340-66-107-5121

5340-66-159-6874
Access Cover

661596874
AVV3.0-10: RNCC: 3 | RNVC: 2

29 Nov 2011

5340-66-131-6656
Spring Tension Clip

661316656
465459C1: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-66-079-6949
Screwed Protector

660796949
19A8052: RNCC: 3 | RNVC: 2

4 Sep 1974

5340-66-108-9838
Access Cover

661089838
163P/0215/014 TYPE B: RNCC: 3 | RNVC: 1

12 Feb 1981

5340-66-153-3164
Mounting Bracket

661533164
DE252240015: RNCC: 3 | RNVC: 2

12 Jul 2005

5340-66-146-5928
Nonmetallic Bumper

661465928
55241-90015: RNCC: 3 | RNVC: 2
55241-90015: RNCC: 5 | RNVC: 2

31 May 2000

5340-66-160-2896
Electronic Equipment Hardware Kit

661602896
640A00518-001-05: RNCC: 3 | RNVC: 2

29 May 2012

5340-66-157-3738
Mounting Bracket

661573738
BMU-A05-2030-01: RNCC: 3 | RNVC: 2
BMU-A05-2030-01: RNCC: 5 | RNVC: 2

27 Oct 2008

5340-66-139-1256
Expansion Plug

661391256
79AX35: RNCC: 3 | RNVC: 2
0050-00-000-7935: RNCC: C | RNVC: 1

15 Apr 1994

5340-66-112-7628
Angle Bracket

661127628
553.30.09.342: RNCC: 3 | RNVC: 2

24 Mar 1995

5340-66-149-5716

5340-66-125-4745
Angle Bracket

5340-66-132-7390
Modem Bracket

5340-66-150-0263
Swivel Caster

661500263
NO PRIMARY REF 66-150-0263: RNCC: 3 | RNVC: 2
00454601: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-146-0884
Handle Grip

661460884
438 4127-02: RNCC: 3 | RNVC: 2

13 Jan 2000

5340-66-143-7485
Rod End Clevis

661437485
VG85525-1M12-2.1030.26: RNCC: 3 | RNVC: 2
VG85525-IM12: RNCC: 5 | RNVC: 2

10 Jul 1997

5340-66-146-1132
Door Handle

661461132
472 9901-08: RNCC: 3 | RNVC: 2

21 Jan 2000

5340-66-158-7560
Mounting Bracket

661587560
BMA-A13-0062-01: RNCC: 3 | RNVC: 2

28 Jul 2010

5340-66-019-0859
Catch Strike

660190859
853283R1: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-157-3192
Lock-Release Lever

661573192
MM-0080-T341: RNCC: 3 | RNVC: 2

8 Oct 2008

5340-66-151-0960
Angle Bracket

661510960
LTA-A20-057: RNCC: 3 | RNVC: 2
LTA-A20-057-001: RNCC: 3 | RNVC: 2

13 May 2003

5340-66-145-2475
Stay Plug Fitting

661452475
MH-A612-0013-A4: RNCC: 3 | RNVC: 2

26 Aug 1999

5340-66-153-6466
Angle Bracket

661536466
47110611121-104: RNCC: 3 | RNVC: 2

6 Oct 2005

5340-66-153-9471
Access Cover

661539471
47770411410-003: RNCC: 3 | RNVC: 2

20 Dec 2005

5340-66-143-9511
Screen

661439511
B-525565-2: RNCC: 3 | RNVC: 2

21 Nov 1997

5340-66-128-6334
Clamping Catch

661286334
SR-1M: RNCC: 3 | RNVC: 2

12 Mar 1992

5340-66-160-7311
Mounting Bracket

661607311
15015833-03: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-66-150-0643
Padlock

661500643
NO PRIMARY REF 66-150-0643: RNCC: 3 | RNVC: 2
03380797: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-147-8587
Spade Leg

661478587
F/2888-520-015A: RNCC: 3 | RNVC: 2
Q EDE F/2888-520-015A: RNCC: 5 | RNVC: 2

25 Sep 2001

5340-66-149-0011
Dust And Moisture Seal Protective Cap

661490011
A53-997-B2180-0K00: RNCC: 3 | RNVC: 2

4 Sep 2002

5340-66-025-5082
Angle Bracket

5340-66-125-3646
Butt Hinge

5340-66-130-5197
Mounting Bracket

5340-66-059-1588
Nonmetallic Bumper

660591588
MLGU47-1 1-2INBUFFER: RNCC: 3 | RNVC: 2

10 Nov 1973

5340-66-033-2766
Helical Compre Seat

5340-66-139-3067
Clamping Catch

5340-66-128-3444
Reverse Lever

5340-66-128-3442
Slide

5340-66-156-5174
Latch Bar

661565174
471-62810-119: RNCC: 3 | RNVC: 2
501398: RNCC: 5 | RNVC: 2

17 Dec 2007

5340-66-128-8730
Mounting Bracket

661288730
YA4355400473: RNCC: 3 | RNVC: 2
0064-35-540-0473: RNCC: C | RNVC: 1

26 Oct 1993

5340-66-155-9024
Retaining Plate

661559024
471-50809-187: RNCC: 3 | RNVC: 2
502622: RNCC: 5 | RNVC: 2

27 Jun 2007

5340-66-120-7179

5340-66-141-4305
Slide Track Support

661414305
004-069-1: RNCC: 3 | RNVC: 2

28 Mar 1996

5340-66-159-1295
General Purpose Resilient Mount

661591295
MC 05-13: RNCC: 3 | RNVC: 2

3 Mar 2011

5340-66-154-5469
Manual Control Handle

661545469
471-DP001-101: RNCC: 3 | RNVC: 2
471-DP001-101: RNCC: 5 | RNVC: 2

4 Jul 2006

5340-66-154-7384
Webbing Strap

661547384
10006012-050: RNCC: 3 | RNVC: 2
10006012-050: RNCC: 5 | RNVC: 2

25 Aug 2006

5340-66-152-1311
Webbing Strap

661521311
DE251330006: RNCC: 3 | RNVC: 2

25 Jun 2004

5340-66-060-8592
Swivel Caster

660608592
10D: RNCC: 3 | RNVC: 2
M107: RNCC: 3 | RNVC: 2

22 Jul 1973

5340-66-153-2740
Mounting Bracket

661532740
A210 0302: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-160-7630
Mounting Bracket

661607630
0100-11586: RNCC: 3 | RNVC: 2

29 Nov 2012

5340-66-116-5537
Retaining Strap

661165537
180/32: RNCC: 3 | RNVC: 2

6 Oct 1983

5340-66-147-7453
Ankle Strap

661477453
DU-014-A: RNCC: 3 | RNVC: 2
DU-014-A: RNCC: 5 | RNVC: 2

2 Aug 2001

5340-66-158-0072
Dust And Moisture Seal Protective Cap

661580072
JMS2022-6: RNCC: 3 | RNVC: 2

17 Jun 2009

5340-66-155-8842
Mounting Bracket

661558842
471-50807-168: RNCC: 3 | RNVC: 2
506070: RNCC: 5 | RNVC: 2

25 Jun 2007

5340-66-152-4890
Crank Assembl Guide

661524890
DE251680005: RNCC: 3 | RNVC: 2

8 Feb 2005

5340-66-152-3654
Mounting Bracket

661523654
15006232: RNCC: 3 | RNVC: 2

30 Sep 2004

5340-66-090-1164
Double Angl Bracket

5340-66-104-3546
Electrical-Mec Post

5340-66-103-0269

5340-66-122-6959
Screw Hook

5340-66-157-9165
Access Cover

661579165
501 89 47-02: RNCC: 3 | RNVC: 2
501 89 47-02: RNCC: 5 | RNVC: 2

15 May 2009

5340-66-158-6534
Mounting Bracket

661586534
DI0005-203: RNCC: 3 | RNVC: 2

13 May 2010

5340-66-151-3428
Angle Bracket

661513428
RAY171000-5: RNCC: 3 | RNVC: 2

25 Mar 2004

5340-66-154-7377
Mounting Plate

661547377
BMP-A05-3043-01: RNCC: 3 | RNVC: 2

24 Aug 2006

5340-66-155-4733
Molding

661554733
196630-12101: RNCC: 3 | RNVC: 2

29 Mar 2007

5340-66-150-1395
Ear Plug Perfit Det

661501395
NO PRIMARY REF 66-150-1395: RNCC: 3 | RNVC: 2
00579496: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-142-8102
Belt-Strap Keeper

661428102
386-1158KHAKI: RNCC: 3 | RNVC: 2

27 Nov 1996

5340-66-154-7838
Mounting Bracket

661547838
15006329: RNCC: 3 | RNVC: 2

5 Sep 2006

5340-66-023-0535
Rod End Clevis

5340-66-024-2863
Strap End Clip

5340-66-152-5020
Rim Latch

661525020
A1-11-502-40: RNCC: 3 | RNVC: 2
A1-11-502-40: RNCC: 5 | RNVC: 2

23 Feb 2005

5340-66-034-8253
General Purpose Resilient Mount

660348253
8557-1-23: RNCC: 3 | RNVC: 2

3 Feb 1960

5340-66-110-8995
Strap Screw

661108995
6CF007-16: RNCC: 3 | RNVC: 2

11 Oct 2001

5340-66-150-0771
Expansion Shield

661500771
NO PRIMARY REF 66-150-0771: RNCC: 3 | RNVC: 2
08785615: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-077-8452
Antipilferage Seal

660778452
19-17208: RNCC: 3 | RNVC: 2

11 Aug 1974

5340-66-147-8867
Cover Plate

661478867
F/2888-550-025C: RNCC: 3 | RNVC: 2

29 Nov 2001

5340-66-142-4621
Butt Hinge

661424621
471-90423-35: RNCC: 3 | RNVC: 2
517412: RNCC: 3 | RNVC: 2

20 Aug 1996

5340-66-154-5386
Mounting Plate

661545386
ASE214-005: RNCC: 3 | RNVC: 2

29 Jun 2006

5340-66-147-8619
Loop Clamp

661478619
MIK 2040: RNCC: 3 | RNVC: 2
Q EDE HYHC/MIK 2040: RNCC: 5 | RNVC: 2

27 Sep 2001

5340-66-157-7358
Access Cover

661577358
537 04 66-01: RNCC: 3 | RNVC: 2
537 04 66-01: RNCC: 5 | RNVC: 2

3 Mar 2009

5340-66-048-1380
Thrust Clamp

660481380
56-340: RNCC: 3 | RNVC: 2

24 Aug 1972

5340-66-091-5206
Electronic Equipment Hardware Kit

660915206
9585-828-99000: RNCC: 3 | RNVC: 2

24 Mar 1976

5340-66-092-0642
Access Cover

5340-66-150-9467
End Clamp

661509467
E/UK: RNCC: 3 | RNVC: 2

11 Mar 2004

5340-66-103-7908
Flush Lock

661037908
270-3: RNCC: 3 | RNVC: 2

19 Feb 1970

5340-66-159-1590

5340-66-150-0641
Padlock

661500641
NO PRIMARY REF 66-150-0641: RNCC: 3 | RNVC: 2
03381851: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-154-8422
Mounting Bracket

661548422
15008380: RNCC: 3 | RNVC: 2

15 Sep 2006

5340-66-160-1493
Rope Cleat

661601493
XH8CLEAT02: RNCC: 3 | RNVC: 2
121193: RNCC: 5 | RNVC: 2

17 Apr 2012

5340-66-127-0453

5340-66-120-7623

5340-66-150-4134
Screw Thread Insert And Tool Assortment

661504134
NO PRIMARY REF 66-150-4134: RNCC: 3 | RNVC: 2
06802707: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-152-1308
Mechanic Equipment Hardware Kit

661521308
DE251330000: RNCC: 3 | RNVC: 2

25 Jun 2004

5340-66-134-9654
Webbing Strap

661349654
23746.000: RNCC: 3 | RNVC: 2
DE590250017: RNCC: 3 | RNVC: 2

10 Jul 1991

5340-66-099-8723

5340-66-108-5296

5340-66-154-3817
Mounting Bracket

661543817
DE252450001: RNCC: 3 | RNVC: 2

9 May 2006

5340-66-154-8818
Dust And Moisture Seal Protective Cap

661548818
15009278: RNCC: 3 | RNVC: 2

28 Sep 2006

5340-66-147-7761
Carriage Roller

661477761
A5291: RNCC: 3 | RNVC: 2

11 Sep 2001

5340-66-160-7987
Mounting Bracket

661607987
ZMB32: RNCC: 3 | RNVC: 2
ZMB32: RNCC: 5 | RNVC: 2

17 Dec 2012

5340-66-150-0221
Swivel Caster

661500221
NO PRIMARY REF 66-150-0221: RNCC: 3 | RNVC: 2
05216019: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-161-2947
Angle Bracket

661612947
15019000: RNCC: 3 | RNVC: 2

26 Aug 2013

5340-66-147-2765
Back Plate

661472765
RAC134D: RNCC: 3 | RNVC: 2

21 Dec 2000

5340-66-143-9536
Access Cover

661439536
B-525687: RNCC: 3 | RNVC: 2

21 Nov 1997

5340-66-043-7436
Rim Lock

660437436
L44-2: RNCC: 3 | RNVC: 2

20 Nov 1971

5340-66-158-0091
Mortise Latch

661580091
JMS2001-69: RNCC: 3 | RNVC: 2

17 Jun 2009

5340-66-150-0661
Padlock

661500661
NO PRIMARY REF 66-150-0661: RNCC: 3 | RNVC: 2
03381171: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-148-5055
Blank Panel

661485055
OED-1749-18-30: RNCC: 3 | RNVC: 2

21 May 2002

5340-66-132-7388
Angle Bracket

5340-66-011-6685
Headle Straight Rod

5340-66-150-7855
Friction Catch Stud

661507855
LTA-A02-214-001: RNCC: 3 | RNVC: 2

4 Apr 2003

5340-66-144-6494
Mounting Bracket

661446494
008-984: RNCC: 3 | RNVC: 2
GYD984: RNCC: 5 | RNVC: 2

16 Feb 1999

5340-66-147-2336
Female Tee

661472336
008/501/GMOWS.3030.2.02: RNCC: 3 | RNVC: 2

29 Nov 2000

5340-66-144-9943
Lock-Release Lever

661449943
479015: RNCC: 3 | RNVC: 2
437717-2: RNCC: 3 | RNVC: 2
437717-2: RNCC: C | RNVC: 1

22 Jun 1999

5340-66-126-8269
Loop Clamp

661268269
DE620050012-2: RNCC: 3 | RNVC: 2

2 Jul 1986

5340-66-088-5431
Transit Frame Plate

660885431
273226: RNCC: 3 | RNVC: 2

27 Jun 1975

5340-66-085-2726
General Purpose Resilient Mount

660852726
13156: RNCC: 3 | RNVC: 2

16 Mar 1975

5340-66-147-8437
Mounting Plate

661478437
TAS201/17/2P: RNCC: 3 | RNVC: 2
TAS201/17/2P: RNCC: 5 | RNVC: 2

5 Mar 2002

5340-66-157-3709
Dust And Moisture Seal Protective Cap

661573709
10053356: RNCC: 3 | RNVC: 2

24 Oct 2008

5340-66-017-5340
General Purpose Resilient Mount

660175340
S19: RNCC: 3 | RNVC: 2
E20822: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-147-3781
Access Door Hinge

661473781
0045304004: RNCC: 3 | RNVC: 2

11 Apr 2001

5340-66-149-9449
Retaining Strap

661499449
NO PRIMARY REF 66-149-9449: RNCC: 3 | RNVC: 2
02416563: RNCC: 5 | RNVC: 2

10 Apr 2003

5340-66-158-4450

5340-66-155-6146
Rod End Connector

661556146
471-90422-251: RNCC: 3 | RNVC: 2
518545: RNCC: 5 | RNVC: 2

24 Apr 2007

5340-66-134-8335
Bail Handle

661348335
04065902: RNCC: 3 | RNVC: 2

6 Jul 1990

5340-66-157-3927
Corrosion Preventive Anode

661573927
AW9C1: RNCC: 3 | RNVC: 2
HSA002755: RNCC: 5 | RNVC: 2
AW9C1: RNCC: 5 | RNVC: 2

6 Nov 2008

5340-66-128-4546
Loop Clamp

661284546
MYH2697: RNCC: 3 | RNVC: 2

12 Nov 1987

5340-66-158-0235
Door Button

661580235
7FA1000A61G04: RNCC: 3 | RNVC: 2

23 Jun 2009

5340-66-033-5579
Rigid Caster

660335579
MN175/CA22: RNCC: 3 | RNVC: 2
MCN7T78: RNCC: 5 | RNVC: 9

28 Oct 1969

5340-66-119-2064

5340-66-126-8551
Cushioning Pad

5340-66-159-2175
Escutcheon Plate

661592175
DE253550016-1: RNCC: 3 | RNVC: 2

7 Apr 2011

5340-66-151-1042
Mounting Bracket

661511042
LTA-A11-005-001: RNCC: 3 | RNVC: 2
LTA-A11-005: RNCC: 5 | RNVC: 2

27 May 2003

5340-66-076-9522
Helical Compression Spring Seat

660769522
1600818: RNCC: 3 | RNVC: 2

7 Oct 1974

5340-66-160-2569
Angle Bracket

661602569
ARLM0795-1: RNCC: 3 | RNVC: 2

14 May 2012

5340-66-150-0764
Expansion Shield

661500764
NO PRIMARY REF 66-150-0764: RNCC: 3 | RNVC: 2
00484568: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-146-9146
Mounting Bracket

661469146
ZG-104: RNCC: 3 | RNVC: 2

4 Oct 2000

5340-66-155-0651
Spring Tension Clip

661550651
471-40205-158: RNCC: 3 | RNVC: 2
515251: RNCC: 5 | RNVC: 2

23 Nov 2006

5340-66-156-4498
Mounting Bracket

661564498
15013484-06: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-66-151-9688
Double Angle Bracket

661519688
MH-X300-0001 SHT 16: RNCC: 3 | RNVC: 1
C06560: RNCC: 3 | RNVC: 2

19 May 2004

5340-66-135-7076
Seal Retaining Plate

661357076
7LV-15113-10: RNCC: 3 | RNVC: 2

6 Jan 1992

5340-66-150-0776
Expansion Shield

661500776
NO PRIMARY REF 66-150-0776: RNCC: 3 | RNVC: 2
01794506: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-143-9669
Bracket

661439669
DSA-24-303-13: RNCC: 3 | RNVC: 2

9 Dec 1997

5340-66-159-2428
Manual Control Lever

661592428
E3-17-25: RNCC: 3 | RNVC: 2
02748/00017: RNCC: 5 | RNVC: 2
02748/00017: RNCC: 5 | RNVC: 2

19 Apr 2011

5340-66-010-6403
Rod End Clevis

660106403
TSE(V)93-271: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-146-3911
Single Shock Pad

661463911
73215-3-28: RNCC: 3 | RNVC: 2

20 Apr 2000

5340-66-136-3223
Mounting Bracket

661363223
RCM-4: RNCC: 3 | RNVC: 2

4 Sep 1992

5340-66-159-7695
Runner

661597695
TF01979-1: RNCC: 3 | RNVC: 2
TF01979-1: RNCC: 5 | RNVC: 2

16 Feb 2012

5340-66-144-7268
Nut And Bolt Locking Plate

661447268
MHC1130-2: RNCC: 3 | RNVC: 2

14 Jan 1999

5340-66-140-5823
Block Assembly

661405823
004-155-01: RNCC: 3 | RNVC: 2

26 Oct 1995

5340-66-157-3325
Mounting Plate

661573325
BMA-A05-1463-01: RNCC: 3 | RNVC: 2

10 Oct 2008

5340-66-156-4497
Mounting Bracket

661564497
15013484-05: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-66-147-8789
Mounting Bracket

661478789
F/2888-530-011D: RNCC: 3 | RNVC: 2

23 Nov 2001

5340-66-125-2733
Angle Bracket

661252733
DE580180727: RNCC: 3 | RNVC: 2

2 Jan 1986

5340-66-106-7068
Solid Mount

661067068
DA87131000: RNCC: 3 | RNVC: 2

13 Oct 1987

5340-66-138-5800
Helical Compression Spring Seat

661385800
M10002: RNCC: 3 | RNVC: 2

16 Feb 1994

5340-66-149-0752
Strap Dispenser

661490752
0842: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-66-141-5502
Angle Bracket

661415502
608/2/44067/006: RNCC: 3 | RNVC: 2

5 Jul 1996

5340-66-157-3869
Mounting Plate

661573869
AG-A0328: RNCC: 3 | RNVC: 2

31 Oct 2008

5340-66-153-4060
Mounting Bracket

661534060
15012724-01: RNCC: 3 | RNVC: 2

11 Aug 2005

5340-66-150-0207
Rigid Caster

661500207
NO PRIMARY REF 66-150-0207: RNCC: 3 | RNVC: 2
00353277: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-154-8332
Mounting Bracket

661548332
P10009-11: RNCC: 3 | RNVC: 2

14 Sep 2006

5340-66-138-2790
Dust And Moisture Seal Protective Cap

661382790
20970: RNCC: 3 | RNVC: 2
U-101917: RNCC: 3 | RNVC: 2

8 Apr 1993

5340-66-158-4717
Vertical Mullion

661584717
SODFAB03/11: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-66-155-8355
Filler Guide

661558355
471-40204-185: RNCC: 3 | RNVC: 2
519498: RNCC: 5 | RNVC: 2

13 Jun 2007

5340-66-147-2574
Side Bar

661472574
DAG62A: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-66-151-0609
Mounting Plate

661510609
LTA-A05-202-001: RNCC: 3 | RNVC: 2

24 Apr 2003

5340-66-151-5898
Extension Handle

661515898
LTA-A60-0009-01: RNCC: 3 | RNVC: 2

12 Aug 2003

5340-66-150-4038
Strapping

661504038
NO PRIMARY REF 66-150-4038: RNCC: 3 | RNVC: 2
05666410: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-142-9770
Butt Hinge

661429770
658/2/06500/000: RNCC: 3 | RNVC: 2

1 May 1997

5340-66-151-6933
Loop Clamp

661516933
LTB-A11-002: RNCC: 3 | RNVC: 1
LT2403: RNCC: 3 | RNVC: 2
HT 1313: RNCC: 5 | RNVC: 2

20 Aug 2003

5340-66-151-1407
General Purpose Access Door

661511407
LTA-A02-026-001: RNCC: 3 | RNVC: 2
LTA-A02-026: RNCC: 5 | RNVC: 2

23 Jun 2003

5340-66-151-1009
Angle Bracket

661511009
LTA-A08-0054: RNCC: 3 | RNVC: 2
LTA-A08-0054-01: RNCC: 3 | RNVC: 2

20 May 2003

5340-66-154-8171
Runner

661548171
471-50806-100T01: RNCC: 3 | RNVC: 2
509405: RNCC: 5 | RNVC: 2

12 Sep 2006

5340-66-158-7985
Webbing Strap

661587985
BMA-H05-0078-01: RNCC: 3 | RNVC: 2

4 Aug 2010

5340-66-140-5604
Butt Hinge

661405604
L/H BUTTHINGE: RNCC: 3 | RNVC: 1
10555779: RNCC: 3 | RNVC: 2
96-50-520-50: RNCC: 3 | RNVC: 2
96-50-520-50: RNCC: 5 | RNVC: 2

12 Apr 1995

5340-66-151-9747
Rod Assy

661519747
MHC510: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-66-062-7296
Butt Hinge

660627296
HINGE: RNCC: 3 | RNVC: 1

22 Jun 1970

5340-66-154-9623
Mounting Bracket

661549623
ARLM0787-1: RNCC: 3 | RNVC: 2

24 Oct 2006

5340-66-086-4075
Strap Hinge

660864075
19P2555: RNCC: 3 | RNVC: 2

9 Sep 1976

5340-66-155-6021
Access Cover

661556021
01563: RNCC: 3 | RNVC: 2

24 Apr 2007

5340-66-105-4885
Mounting Plate

661054885
450012116: RNCC: 3 | RNVC: 2

22 Mar 1991

5340-66-134-6312
Mounting Plate

661346312
7H5-82182-00: RNCC: 3 | RNVC: 2

19 Dec 1991

5340-66-151-6950
Mounting Bracket

661516950
LTE-A09-0001: RNCC: 3 | RNVC: 1
LTE-A09-0001-01: RNCC: 3 | RNVC: 2

28 Aug 2003

5340-66-128-7372
Spacing Threaded Standoff

661287372
640/2/29119/001: RNCC: 3 | RNVC: 2

3 Sep 1993

5340-66-130-0596
Crank Handle

661300596
006061: RNCC: 3 | RNVC: 2

17 Aug 1987

5340-66-157-0013
Double Angle Bracket

661570013
DE253010001-3: RNCC: 3 | RNVC: 2

2 Jul 2008

5340-66-139-2954
Angle Bracket

661392954
DE250530136: RNCC: 3 | RNVC: 2

29 Aug 1994

5340-66-159-2173
Escutcheon Plate

661592173
DE253550016-2: RNCC: 3 | RNVC: 2

7 Apr 2011

5340-66-141-1348
Manual Control Handle

661411348
119-03-204: RNCC: 3 | RNVC: 2

3 Oct 1995

5340-66-154-8860
Mounting Bracket

661548860
8077-1017: RNCC: 3 | RNVC: 2

28 Sep 2006

5340-66-159-4331
Mounting Plate

661594331
BMU-A18-3012B01: RNCC: 3 | RNVC: 2

12 Jul 2011

5340-66-158-3792
General Purpose Resilient Mount

661583792
26629-1: RNCC: 3 | RNVC: 2
26629-1/01: RNCC: 5 | RNVC: 2

3 Dec 2009

5340-66-160-3883
Mounting Bracket

661603883
ID32-215: RNCC: 3 | RNVC: 2

4 Jul 2012

5340-66-157-5603
Antipilferage Seal

661575603
Z/F/0484/00: RNCC: 3 | RNVC: 2

17 Dec 2008

5340-66-156-2523
Mounting Plate

661562523
A2100156-2: RNCC: 3 | RNVC: 2

4 Oct 2007

5340-66-147-1074
Mounting Bracket

661471074
015199: RNCC: 3 | RNVC: 2

15 Feb 2001

5340-66-155-5124
General Purpose Resilient Mount

661555124
196630-05410: RNCC: 3 | RNVC: 2

4 Apr 2007

5340-66-138-9895
Clamping Catch

661389895
535/2/00155: RNCC: 3 | RNVC: 2
535/2/00155/000: RNCC: 5 | RNVC: 1
K3-2140-09: RNCC: 5 | RNVC: 2

11 Jan 1994

5340-66-142-8217
Mounting Bracket

661428217
658/2/05788/000: RNCC: 3 | RNVC: 2

13 Jan 1997

5340-66-150-2465
Hasp Staple

661502465
NO PRIMARY REF 66-150-2465: RNCC: 3 | RNVC: 2
04060800: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-158-4811
Corner Brace

661584811
50-0072-02: RNCC: 3 | RNVC: 2

15 Feb 2010

5340-66-148-2475
Sheave Assembly

661482475
2888-570-003D: RNCC: 3 | RNVC: 2
Q EDE 2888-570-003D: RNCC: 5 | RNVC: 2

18 Apr 2002

5340-66-089-4637
Padlock

660894637
232DL: RNCC: 3 | RNVC: 2
06562602: RNCC: 5 | RNVC: 2
0407 2801: RNCC: 5 | RNVC: 2

7 May 1976

5340-66-143-5999
Mounting Bracket

661435999
3(02)(PORT FWD): RNCC: 3 | RNVC: 2
TYPE 3(02)(PORT FWD): RNCC: 5 | RNVC: 2

30 Sep 1997

5340-66-033-0979
Webbing Strap

660330979
DC3041-2: RNCC: 3 | RNVC: 2

11 Aug 1969

5340-66-155-7579
Caster Thrust Block

661557579
D-005-1: RNCC: 3 | RNVC: 2

22 May 2007

5340-66-141-6109
Fork Assembly

661416109
008-392: RNCC: 3 | RNVC: 2
008-392: RNCC: 3 | RNVC: 2

25 Sep 1996

5340-66-155-2778
General Purpose Access Door

661552778
MR-003: RNCC: 3 | RNVC: 2

12 Feb 2007

5340-66-155-3110
Mounting Bracket

661553110
471-41243-23: RNCC: 3 | RNVC: 2
512522: RNCC: 5 | RNVC: 2

27 Feb 2007

5340-66-122-6053
Bracket

5340-66-122-7463
Wood Bracket

5340-66-122-4418
Retaining Band

5340-66-155-3718
Mounting Bracket

661553718
471-41243-127: RNCC: 3 | RNVC: 2
512475: RNCC: 5 | RNVC: 2

14 Mar 2007

5340-66-133-6430
Mending Plate

661336430
V0H-16: RNCC: 3 | RNVC: 2

12 Feb 1990

5340-66-149-0091
Tube Assembly

661490091
A55-997-B2964-0A00: RNCC: 3 | RNVC: 2

11 Sep 2002

5340-66-160-9419
Mounting Bracket

661609419
DE252930006: RNCC: 3 | RNVC: 2

18 Mar 2013

5340-66-126-2326
Cushioning Pad

661262326
6E5-21746-00: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-66-142-9780
Butt Hinge

661429780
658/2/06527/000: RNCC: 3 | RNVC: 2

5 May 1997

5340-66-152-0291
Cradle Fabrication

661520291
BMA-A05-1502-01: RNCC: 3 | RNVC: 2

29 Sep 2004

5340-66-157-7619
Manual Control Handle

661577619
506 23 13-02: RNCC: 3 | RNVC: 2
506 23 16-02: RNCC: 5 | RNVC: 2

18 Mar 2009

5340-66-129-0075
Plug

661290075
M2686 300-2: RNCC: 3 | RNVC: 2

12 Jun 1987

5340-66-148-6050
Block Clamp

661486050
306116: RNCC: 3 | RNVC: 2
306116: RNCC: 5 | RNVC: 2

11 Mar 2003

5340-66-157-4097
Doorstop

661574097
X73RU12: RNCC: 3 | RNVC: 2

12 Nov 2008

5340-66-128-6945
Tyre Compressor Kit

661286945
AYG0577: RNCC: 3 | RNVC: 2

21 Jul 1993

5340-66-147-7897
Subframe Assembly

661477897
F/2888-520-003A: RNCC: 3 | RNVC: 2
Q EDE F/2888-520-003A: RNCC: 5 | RNVC: 2

24 Sep 2001

5340-66-155-0645
Mounting Bracket

661550645
471-40205-157: RNCC: 3 | RNVC: 2
515250: RNCC: 5 | RNVC: 2

23 Nov 2006

5340-66-126-1481
Mounting Plate

661261481
322-1R: RNCC: 3 | RNVC: 2

7 Dec 1990

5340-66-158-6837
Mounting Bracket

661586837
RAY184026-3: RNCC: 3 | RNVC: 2
RAY184026-3: RNCC: 5 | RNVC: 2

3 Jun 2010

5340-66-025-2163
Angle Bracket

660252163
ADE(V)94-475-1: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-149-7143
Permanent Magnet

661497143
NO PRIMARY REF 66-149-7143: RNCC: 3 | RNVC: 2
06954804: RNCC: 5 | RNVC: 2

10 Apr 2003

5340-66-141-1340
General Purpose Resilient Mount

661411340
KAB80-4259E T60: RNCC: 3 | RNVC: 2

4 Oct 1995

5340-66-147-9199
Low Pressure Switch

661479199
AC955: RNCC: 3 | RNVC: 2

20 Dec 2001

5340-66-104-1320
Access Cover

661041320
023-2566: RNCC: 3 | RNVC: 2

12 Feb 1971

5340-66-150-7852
Multiple Angle Bracket

661507852
LTA-A10-005-001: RNCC: 3 | RNVC: 2

3 Apr 2003

5340-66-101-3545
Tank Shell

661013545
400-16749-1: RNCC: 3 | RNVC: 2

4 Apr 1979

5340-66-149-5285
Rest Wrist

661495285
NO PRIMARY REF 66-149-5285: RNCC: 3 | RNVC: 2
91737: RNCC: 5 | RNVC: 2

4 Apr 2003

5340-66-139-1989
Air Mounting Plate

661391989
AYG5640: RNCC: 3 | RNVC: 2
0068-00-000-5640: RNCC: C | RNVC: 1

31 May 1994

5340-66-154-7417
Webbing Strap

661547417
10006014-035: RNCC: 3 | RNVC: 2
10006014-035: RNCC: 5 | RNVC: 2

28 Aug 2006

5340-66-150-0378
Door Hook And Eye

661500378
NO PRIMARY REF 66-150-0378: RNCC: 3 | RNVC: 2
03602007: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-085-8675
Plain Solid Disk

660858675
NO PRIMARY REF 66-085-8675: RNCC: 3 | RNVC: 2

7 May 1976

5340-66-142-6592
Mounting Bracket

661426592
DSA-10-389-3: RNCC: 3 | RNVC: 2

14 Jan 1997

5340-66-151-9685
T Bracket

661519685
MH-X300-0001 SHT16: RNCC: 3 | RNVC: 1
C06540: RNCC: 3 | RNVC: 2

20 May 2004

5340-66-037-3248
Synchro Clamp

660373248
EDE71: RNCC: 3 | RNVC: 2

28 Sep 1970

5340-66-082-0667
Key Blank

660820667
DALS0NFA: RNCC: 3 | RNVC: 2

25 Oct 1974

5340-66-145-1099
Mounting Bracket

661451099
TF00432: RNCC: 3 | RNVC: 1
TF00432-2: RNCC: 3 | RNVC: 2

3 Jun 2003

5340-66-105-6824
Mortise Lock Set

661056824
3502: RNCC: 3 | RNVC: 2

4 Feb 1981

5340-66-155-1379
Shaft Hinge

661551379
236127-001: RNCC: 3 | RNVC: 2

12 Dec 2006

5340-66-151-4330
Loop Clamp

661514330
EBU-0011: RNCC: 3 | RNVC: 2

8 Dec 2003

5340-66-148-3957
Loop Clamp

661483957
1529-2516/1: RNCC: 3 | RNVC: 2

8 Mar 2002

5340-66-116-6158
Retainer Pipe

661166158
29000/415-3: RNCC: 2 | RNVC: 2
29000/415-3: RNCC: 3 | RNVC: 2

26 May 1983

5340-66-120-6759
Fwd. Hinge Half

661206759
12S1796-11-148: RNCC: 3 | RNVC: 2

13 Oct 1986

5340-66-150-3936
Butt Hinge

661503936
NO PRIMARY REF 66-150-3936: RNCC: 3 | RNVC: 2
04084103: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-152-2609
Access Cover

661522609
BMA-A05-1481-01: RNCC: 3 | RNVC: 2

25 Sep 2004

5340-66-145-0049
Mounting Bracket

661450049
MH-A613-0001-C3: RNCC: 3 | RNVC: 2

29 Jun 1999

5340-66-093-6947
Access Cover

660936947
163P/0215/014 TYPE H: RNCC: 3 | RNVC: 2

26 May 1978

5340-66-144-4698
Webbing Strap

661444698
AS/NZS 4380:1996: RNCC: 3 | RNVC: 1
11-240503B-120: RNCC: 3 | RNVC: 2

11 Nov 1998

5340-66-155-9502
Manual Control Lever

661559502
45-12-01-35108-101: RNCC: 3 | RNVC: 2

9 Jul 2007

5340-66-160-7757
Mounting Plate

661607757
61137703-040: RNCC: 3 | RNVC: 2
61137703-040: RNCC: 5 | RNVC: 2

5 Dec 2012

5340-66-147-2332
Spacer

661472332
007/304/GMOWS.3030.06: RNCC: 3 | RNVC: 2

29 Nov 2000

5340-66-153-7512
Angle Bracket

661537512
47120111303-103: RNCC: 3 | RNVC: 2

24 Oct 2005

5340-66-134-9858
Pipe Hanger

661349858
CP1090-6: RNCC: 3 | RNVC: 2

16 Jan 1991

5340-66-155-8418
Angle Bracket

661558418
471-50810-146: RNCC: 3 | RNVC: 2
506957: RNCC: 5 | RNVC: 2

14 Jun 2007

5340-66-144-5264
Mounting Bracket

661445264
A209141-2L: RNCC: 3 | RNVC: 2

4 Dec 1998

5340-66-028-7929
General Purpose Resilient Mount

660287929
WRF2452-3: RNCC: 3 | RNVC: 2
NA544: RNCC: 5 | RNVC: 2

26 Oct 1968

5340-66-158-3071
Mounting Bracket

661583071
800-360007: RNCC: 3 | RNVC: 2

5 Nov 2009

5340-66-152-0205
Mounting Bracket

661520205
BMA-A05-0922-01: RNCC: 3 | RNVC: 2

14 Sep 2004

5340-66-160-2607
Double Angle Bracket

661602607
ARLM0802-1: RNCC: 3 | RNVC: 2

15 May 2012

5340-66-143-5334
Manual Control Lever

661435334
HYG6212: RNCC: 3 | RNVC: 2

22 May 1997

5340-66-148-4000
Gland

661484000
M48-0018D01: RNCC: 3 | RNVC: 2
1520787: RNCC: 5 | RNVC: 2

15 Mar 2002

5340-66-066-4250
Angle Bracket

660664250
179257K: RNCC: 3 | RNVC: 2

7 Feb 1974

5340-66-154-6985
Angle Bracket

661546985
DE252580014: RNCC: 3 | RNVC: 2

15 Aug 2006

5340-66-145-4676
Mounting Bracket

661454676
608/2/57517/004: RNCC: 3 | RNVC: 2

23 Sep 1999

5340-66-145-7674
Damper

661457674
489 5753-00: RNCC: 3 | RNVC: 2

22 Oct 1999

5340-66-128-6360
Webbing Strap

661286360
HYG4146: RNCC: 3 | RNVC: 2

5 Mar 1992

5340-66-107-3648
Sliding Tabl Cutout

661073648
01F258-21: RNCC: 3 | RNVC: 2

18 Jul 1980

5340-66-158-0251
Mortise Latch Set

661580251
7FD8000A45G01: RNCC: 3 | RNVC: 2

23 Jun 2009

5340-66-133-3102
Mounting Bracket

661333102
ATS101008: RNCC: 3 | RNVC: 2

20 Aug 1996

5340-66-160-8810
Tie Down Adapter

661608810
10008181-16032: RNCC: 3 | RNVC: 2
CLM-34615-SHR: RNCC: 5 | RNVC: 2

20 Feb 2013

5340-66-161-1962
Cushioning Pad

661611962
15019474-08: RNCC: 3 | RNVC: 2

19 Jul 2013

5340-66-158-7591
Mounting Bracket

661587591
BMA-A08-0291-02: RNCC: 3 | RNVC: 2

28 Jul 2010

5340-66-144-7289
Mounting Bracket

661447289
MHC1124-1: RNCC: 3 | RNVC: 2

15 Jan 1999

5340-66-126-2789
General Purpose Resilient Mount

661262789
6G5-44551-00-EK: RNCC: 3 | RNVC: 2
6G5-44551-00-EK: RNCC: 3 | RNVC: 2

16 Jan 1991

5340-66-126-2350
Clamp Plate

661262350
6R3-42828-00: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-66-158-7581
Mounting Bracket

661587581
BMA-A09-0060: RNCC: 3 | RNVC: 2

28 Jul 2010

5340-66-142-9664
Angle Bracket

661429664
658/2/06817/012: RNCC: 3 | RNVC: 2

14 Apr 1997

5340-66-021-8148
Padlock

660218148
232A: RNCC: 3 | RNVC: 2
232/30/125/KD: RNCC: 3 | RNVC: 2
ARMY(AUST)6504: RNCC: 4 | RNVC: 1
20843: RNCC: 5 | RNVC: 2
MAS140D: RNCC: 5 | RNVC: 2
03380865: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-66-108-9835
Access Cover

661089835
163P/0215/014 TYPE A: RNCC: 3 | RNVC: 1

21 Jul 1981

5340-66-156-4734
General Purpose Resilient Mount

661564734
15015914-01: RNCC: 3 | RNVC: 2

4 Dec 2007

5340-66-150-3720
Spring Tension Clip

661503720
NO PRIMARY REF 66-150-3720: RNCC: 3 | RNVC: 2
09864014: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-160-2441
Butt Hinge

661602441
FMA-H05-0025-01: RNCC: 3 | RNVC: 2

7 May 2012

5340-66-160-2614
Angle Bracket

661602614
553.10.09.533: RNCC: 3 | RNVC: 2

15 May 2012

5340-66-159-5937
Manual Control Handle

661595937
916482: RNCC: 3 | RNVC: 2

20 Oct 2011

5340-66-157-4236
Dust And Moisture Seal Protective Cap

661574236
CP4T: RNCC: 3 | RNVC: 2
15017477: RNCC: 5 | RNVC: 2

18 Nov 2008

5340-66-154-7760
Mounting Plate

661547760
15004008: RNCC: 3 | RNVC: 2

4 Sep 2006

5340-66-157-3429
Butt Hinge

661573429
GE2-R: RNCC: 3 | RNVC: 2
6039-11: RNCC: 5 | RNVC: 2

14 Oct 2008

5340-66-072-5017
Door Hook

660725017
NO PRIMARY REF 66-072-5017: RNCC: 3 | RNVC: 2

25 Jun 1974

5340-66-154-4026
Safety Bar Housing

661544026
471-60801-186: RNCC: 3 | RNVC: 2
471-60801-186: RNCC: 5 | RNVC: 2

16 May 2006

5340-66-139-1654
Access Cover

661391654
402KB340: RNCC: 3 | RNVC: 2
0050-00-040-2340: RNCC: C | RNVC: 1

15 Apr 1994

5340-66-031-3604
Mounting Bracket

660313604
ADE(V)225-652: RNCC: 3 | RNVC: 2

20 Dec 1968

5340-66-158-9102
General Purpose Resilient Mount

661589102
AU-1248-55-B: RNCC: 3 | RNVC: 2
P0006422: RNCC: 5 | RNVC: 2

18 Oct 2010

5340-66-031-9516
Spring Tension Clip

660319516
ADE(W)67-880: RNCC: 3 | RNVC: 2

8 Aug 1969

5340-66-143-9695
Spacing Threaded Standoff

661439695
608/2/47639: RNCC: 3 | RNVC: 2

11 Dec 1997

5340-66-143-9286
Access Cover

661439286
501-454: RNCC: 3 | RNVC: 2

16 Sep 1997

5340-66-160-2296
Webbing Strap

661602296
BMA-A05-1747-01: RNCC: 3 | RNVC: 2

2 May 2012

5340-66-156-5487
Track Stop

661565487
BMA-A07-0089: RNCC: 3 | RNVC: 2
BMA-A07-0089-01: RNCC: 3 | RNVC: 2

10 Jan 2008

5340-66-148-4245
Battery Tool

661484245
50-211-307: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-66-032-8932
Loop Clamp

660328932
310493: RNCC: 3 | RNVC: 2

29 Jul 1969

5340-66-140-6713
Electronic Equipment Hardware Kit

661406713
MX-F231: RNCC: 3 | RNVC: 2
DE530020025: RNCC: 3 | RNVC: 2

16 Aug 1995

5340-66-154-8525
Blank Panel

661548525
15010478-11: RNCC: 3 | RNVC: 2

19 Sep 2006

5340-66-159-2731
Loop Clamp

661592731
AN-3806: RNCC: 3 | RNVC: 2

12 May 2011

5340-66-152-0141
Mounting Plate

661520141
01-0930489: RNCC: 3 | RNVC: 2
20-0952032-22: RNCC: 3 | RNVC: 2

28 Aug 2004

5340-66-154-3371
Door Handle

661543371
92-11-131: RNCC: 3 | RNVC: 2
1643976: RNCC: 5 | RNVC: 2

28 Apr 2006

5340-66-157-4043
Electronic Equipment Hardware Kit

661574043
RM-3/NEW: RNCC: 3 | RNVC: 2
RM-3/NEW: RNCC: 5 | RNVC: 2

11 Nov 2008

5340-66-158-2204
Manual Control Lever

661582204
BMU-A05-2040-01: RNCC: 3 | RNVC: 2

2 Oct 2009

5340-66-146-3546
Webbing Strap

661463546
240382A-70: RNCC: 3 | RNVC: 2

14 Apr 2000

5340-66-144-7288
Strap Hinge Leaf

661447288
MHC1123-3: RNCC: 3 | RNVC: 2

15 Jan 1999

5340-66-048-6627
Dust And Moisture Seal Protective Plug

660486627
DB1509: RNCC: 3 | RNVC: 2
N0R385-4: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

21 Mar 1972

5340-66-139-0311
Spring Tension Clip

661390311
999/4/43091: RNCC: 3 | RNVC: 2

17 Feb 1994

5340-66-020-7788
Dust And Moisture Seal Protective Plug

660207788
H15637B: RNCC: 3 | RNVC: 2
GS195-4: RNCC: 5 | RNVC: 2
P6: RNCC: C | RNVC: 1
H14866-8FNF: RNCC: C | RNVC: 1

1 Jan 1968

5340-66-143-7283
Bend Conduit

661437283
658/2/06416/000: RNCC: 3 | RNVC: 2

4 Jul 1997

5340-66-159-8208
Mounting Plate

661598208
BMP-A21-3009-01: RNCC: 3 | RNVC: 2

23 Feb 2012

5340-66-122-2645
General Purpose Resilient Mount

661222645
S48P: RNCC: 3 | RNVC: 2

13 May 1985

5340-66-156-3394
Mounting Bracket

661563394
15015514: RNCC: 3 | RNVC: 2

1 Nov 2007

5340-66-155-4932
Guide

661554932
196630-08110: RNCC: 3 | RNVC: 2

2 Apr 2007

5340-66-142-4641
Angle Bracket

661424641
471-44468-532: RNCC: 3 | RNVC: 2
511250: RNCC: 3 | RNVC: 2

21 Aug 1996

5340-66-107-7835
General Purpose Resilient Mount

661077835
65-0140: RNCC: 3 | RNVC: 2

11 Aug 1980

5340-66-146-1993
Metal Grille

661461993
472 8061-01: RNCC: 3 | RNVC: 2

10 Feb 2000

5340-66-156-1429
Access Cover

661561429
RP692019/A/29: RNCC: 3 | RNVC: 2
RP692019/A/29: RNCC: 5 | RNVC: 2

5 Sep 2007

5340-66-150-0754
Expansion Shield

661500754
NO PRIMARY REF 66-150-0754: RNCC: 3 | RNVC: 2
01820506: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-154-0203
Spring Tension Clip

661540203
47110017826-163: RNCC: 3 | RNVC: 2

25 Jan 2006

5340-66-033-6409
Rigid Caster

660336409
MSQ125G/CE-7/DL: RNCC: 3 | RNVC: 2

28 Oct 1969

5340-66-157-9775
General Purpose Resilient Mount

661579775
P#3.5F60-11-12 (50): RNCC: 3 | RNVC: 2
BDI 26201: RNCC: 5 | RNVC: 2

11 Jun 2009

5340-66-157-1132
Corrosion Preventive Anode

661571132
CDZ8-126-275 S: RNCC: 3 | RNVC: 2

30 Jul 2008

5340-66-157-1139
Corrosion Preventive Anode

661571139
CDZ8-123-150 H: RNCC: 3 | RNVC: 2

30 Jul 2008

5340-66-158-8298
Lock-Release Lever

661588298
IS-970G-T: RNCC: 3 | RNVC: 2
P0000699: RNCC: 5 | RNVC: 2

17 Aug 2010

5340-66-160-6709
General Purpose Resilient Mount

661606709
23-2599-02: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-66-150-1389
Ear Plug Foam Dispo

661501389
NO PRIMARY REF 66-150-1389: RNCC: 3 | RNVC: 2
00893027: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-161-4495
Mounting Bracket

661614495
A40-003390-001: RNCC: 3 | RNVC: 2

4 Nov 2013

5340-66-149-2675
Permanent Magnet

661492675
NO PRIMARY REF 66-149-2675: RNCC: 3 | RNVC: 2
86571065: RNCC: 5 | RNVC: 2

24 Mar 2003

5340-66-149-5777
Permanent Magnet

661495777
NO PRIMARY REF 66-149-5777: RNCC: 3 | RNVC: 2
QTTMB2000: RNCC: 5 | RNVC: 2

7 Apr 2003

5340-66-149-0214
Mounting Plate

661490214
PMG-M23 REARPLATE: RNCC: 3 | RNVC: 1
PMG-M23: RNCC: 5 | RNVC: 2

26 Sep 2002

5340-66-158-4096
Access Cover

661584096
K12700-221: RNCC: 3 | RNVC: 2

22 Dec 2009

5340-66-151-5765
Mounting Bracket

661515765
LTA-A20-049: RNCC: 3 | RNVC: 1
52.04-0149: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-66-151-1534
Loop Clamp

661511534
LTE-A14-0001: RNCC: 3 | RNVC: 1
LT2405: RNCC: 3 | RNVC: 2

24 Jun 2003

5340-66-159-9785
Mounting Bracket

661599785
MH-A184-0059-A2: RNCC: 3 | RNVC: 2

15 Mar 2012

5340-66-125-3631
Angle Bracket

5340-66-125-3063
Retaining Strap

5340-66-152-6207
Mounting Bracket

661526207
MO PRIMARY REF 66-152-6207: RNCC: 3 | RNVC: 2
18568024: RNCC: 3 | RNVC: 2

24 Jan 2005

5340-66-146-8401
Retaining Clip

661468401
CB-10: RNCC: 3 | RNVC: 2

24 Aug 2000

5340-66-155-0900
Manual Control Handle

661550900
471-60812-106: RNCC: 3 | RNVC: 2
510099: RNCC: 5 | RNVC: 2

29 Nov 2006

5340-66-153-4107
Mounting Bracket

661534107
15012726: RNCC: 3 | RNVC: 2

12 Aug 2005

5340-66-014-3953
Padlock

660143953
245: RNCC: 3 | RNVC: 2
ARMY(AUST)6504: RNCC: 4 | RNVC: 1

1 Jan 1968

5340-66-142-4436
Webbing Strap

661424436
1013002: RNCC: 3 | RNVC: 2

31 Jul 1996

5340-66-150-4133
Screw Thread Insert And Tool Assortment

661504133
NO PRIMARY REF 66-150-4133: RNCC: 3 | RNVC: 2
00103020: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-147-8603
Control Panel

661478603
F/2888-550-044: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-044: RNCC: 5 | RNVC: 2

26 Sep 2001

5340-66-150-7840
Multiple Angle Bracket

661507840
LTA-A10-0046-01: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-66-158-9443
Webbing Strap

661589443
10006014-070: RNCC: 3 | RNVC: 2
10006014-070: RNCC: 5 | RNVC: 2

3 Nov 2010

5340-66-146-9095
V Bolt Kit

661469095
KH-AFV: RNCC: 3 | RNVC: 2

4 Oct 2000

5340-66-142-9794
Angle Bracket

661429794
MT-F507: RNCC: 3 | RNVC: 2
015033: RNCC: 3 | RNVC: 2

9 May 1997

5340-66-128-5681
Pin Retaining Clip

661285681
42-0601A: RNCC: 3 | RNVC: 2
HYL9005: RNCC: 5 | RNVC: 2

14 Aug 1989

5340-66-139-3290
Mounting Bracket

661393290
DE250530354: RNCC: 3 | RNVC: 2

22 Jan 1996

5340-66-142-6598
General Purpose Resilient Mount

661426598
DSA-22-1146-16: RNCC: 3 | RNVC: 2

14 Jan 1997

5340-66-160-2111
Retaining Strap

661602111
121032: RNCC: 3 | RNVC: 2
56302: RNCC: 3 | RNVC: 2

27 Apr 2012

5340-66-160-7839
Double Angle Bracket

661607839
15019547: RNCC: 3 | RNVC: 2

10 Dec 2012

5340-66-154-7386
Webbing Strap

661547386
10006012-070: RNCC: 3 | RNVC: 2
10006012-070: RNCC: 5 | RNVC: 2

25 Aug 2006

5340-66-160-9932
Retaining Clip

661609932
092.71: RNCC: 3 | RNVC: 2
092.71: RNCC: 5 | RNVC: 2

10 Apr 2013

5340-66-154-8753
Extension Drawer Slide

661548753
15011702-2250: RNCC: 3 | RNVC: 2

26 Sep 2006

5340-66-143-1466
Dust And Moisture Seal Protective Cover

661431466
138100 16440 K 0001/19: RNCC: 3 | RNVC: 2
9051460572: RNCC: 5 | RNVC: 2

28 Jan 1998

5340-66-146-1782
Backing Spring

661461782
H70914-3-4: RNCC: 3 | RNVC: 2

11 Feb 2000

5340-66-138-4907
Nonmetallic Bumper

661384907
H3-721-47110/7: RNCC: 3 | RNVC: 2
13005732: RNCC: 3 | RNVC: 2

14 Dec 1993

5340-66-147-8687
Mounting Bracket

661478687
F/2888-550-026A: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-026A: RNCC: 5 | RNVC: 2

15 Oct 2001

5340-66-147-7838
Link Plate

661477838
F/2888-530-006W: RNCC: 3 | RNVC: 2
Q EDE F/2888-530-006W: RNCC: 5 | RNVC: 2

19 Sep 2001

5340-66-149-2667
Spring Tension Clip

661492667
NO PRIMARY REF 66-149-2667: RNCC: 3 | RNVC: 2
86637964: RNCC: 5 | RNVC: 2

24 Mar 2003

5340-66-157-4609
Angle Bracket

661574609
V100-CE-0011: RNCC: 3 | RNVC: 2

26 Nov 2008

5340-66-156-0624
Manual Control Lever

661560624
92-42-531: RNCC: 3 | RNVC: 2

15 Aug 2007

5340-66-157-7808
Access Cover

661577808
30002-1111: RNCC: 3 | RNVC: 2

25 Mar 2009

5340-66-154-6264
Mounting Bracket

661546264
471-51631-15: RNCC: 3 | RNVC: 2
524532: RNCC: 5 | RNVC: 2

31 Jul 2006

5340-66-156-7191
Casement Fastener

661567191
BMF-A07-0087-01: RNCC: 3 | RNVC: 2

7 Mar 2008

5340-66-154-6284
Electronic Equipment Hardware Kit

661546284
SCES13917: RNCC: 3 | RNVC: 2

31 Jul 2006

5340-66-016-0517
Locking Stay

660160517
332182: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-154-3281
Access Cover

661543281
471-RH000-009-T04: RNCC: 3 | RNVC: 2
471-RH000-009-T04: RNCC: 5 | RNVC: 2

26 Apr 2006

5340-66-156-4779
Extension Drawer Slide

661564779
10008006-01: RNCC: 3 | RNVC: 2
C9308-14-L: RNCC: 5 | RNVC: 2

6 Dec 2007

5340-66-125-8997
General Purpose Resilient Mount

661258997
7LR-22891-00: RNCC: 3 | RNVC: 2

2 Jan 1992

5340-66-161-3620
Bumper

661613620
QASM00706-003: RNCC: 3 | RNVC: 2

24 Sep 2013

5340-66-150-2474
Angle Bracket

661502474
NO PRIMARY REF 66-150-2474: RNCC: 3 | RNVC: 2
04675910: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-137-4455
Mounting Plate

661374455
K43514: RNCC: 3 | RNVC: 2

13 Jan 1993

5340-66-067-5784
Loop Clamp

660675784
MS17821-1-9A: RNCC: 2 | RNVC: 2

1 Sep 1974

5340-66-135-5021
Access Cover

661355021
BHP/153: RNCC: 3 | RNVC: 2

24 Mar 1992

5340-66-017-0216
Angle Bracket

660170216
156-1: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-112-3439
Rigid Caster

661123439
HUR 200X/XF: RNCC: 3 | RNVC: 2

19 Mar 1992

5340-66-093-7830
Retaining Strap

660937830
PGAP55: RNCC: 3 | RNVC: 2

30 Jan 1977

5340-66-122-9987
Loop Clamp

661229987
59629865: RNCC: 3 | RNVC: 2

10 Jul 1985

5340-66-155-1552
Filler Opening Cap

661551552
1414-05-03: RNCC: 3 | RNVC: 2

18 Dec 2006

5340-66-146-0930
Air Inlet

661460930
471 4516-03: RNCC: 3 | RNVC: 2

18 Jan 2000

5340-66-137-2745
Locking Assembly

661372745
840629-1-A6-B32-C5/2343: RNCC: 3 | RNVC: 2

27 Oct 1992

5340-66-150-0200
Rigid Caster

661500200
NO PRIMARY REF 66-150-0200: RNCC: 3 | RNVC: 2
04806006: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-140-0921
Rod End Clevis

661400921
275C-0258: RNCC: 3 | RNVC: 2

10 Nov 1994

5340-66-160-3913
Mounting Plate

661603913
ID0006-003: RNCC: 3 | RNVC: 2

6 Jul 2012

5340-66-150-5345
Pipe Hanger

661505345
NO PRIMARY REF 66-150-5345: RNCC: 3 | RNVC: 2
01914055: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-029-4526
Spring Tension Clip

660294526
GEG625: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-098-4538
Loop Clamp

5340-66-140-5858
Spring Tension Clip

5340-66-140-5746
Lock Key

5340-66-153-3229
Stow Latch Housing

661533229
DE 100450043: RNCC: 3 | RNVC: 2

14 Jul 2005

5340-66-123-0878
Mounting Plate

661230878
RF2048: RNCC: 3 | RNVC: 2

25 Sep 1985

5340-66-128-5942
Spring Tension Clip

661285942
102033: RNCC: 3 | RNVC: 2
HYL9613: RNCC: 5 | RNVC: 2
102033: RNCC: 5 | RNVC: 2

7 Jun 1990

5340-66-147-2482
Sleeve

661472482
002/405/GMOWS.3030.07: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-66-147-9384
Dust And Moisture Seal Protective Cap

661479384
D5-3DLO: RNCC: 3 | RNVC: 2

24 Jan 2002

5340-66-131-7389
Loop Clamp

661317389
571.10.09.077: RNCC: 3 | RNVC: 2

17 Mar 1989

5340-66-158-7374
Mounting Bracket

661587374
15016859: RNCC: 3 | RNVC: 2

15 Jul 2010

5340-66-093-0300
Hand Crank

660930300
E117B27689: RNCC: 3 | RNVC: 2

15 Nov 1976

5340-66-164-7954

5340-66-164-7703

5340-66-155-8479
Mechanical Stop

661558479
471-51806-107: RNCC: 3 | RNVC: 2
504323: RNCC: 5 | RNVC: 2

15 Jun 2007

5340-66-156-0325
Sealing Plug Assembly

661560325
AG-A0621: RNCC: 3 | RNVC: 2

30 Jul 2007

5340-66-150-5053
Mounting Bracket

661505053
NO PRIMARY REF 66-150-5053: RNCC: 3 | RNVC: 2
00997142: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-142-9606
Spacer Block

661429606
658/2/06504/001: RNCC: 3 | RNVC: 2

20 Mar 1997

5340-66-160-4352
Bumper

661604352
BMP-A19-3017-01: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-66-160-3884
Mounting Bracket

661603884
ID32-225: RNCC: 3 | RNVC: 2

4 Jul 2012

5340-66-088-4952
Hinged Hasp

660884952
C372GALV5IN: RNCC: 3 | RNVC: 2

1 Feb 1976

5340-66-145-0112
Dust And Moisture Seal Protective Cap

661450112
0568092: RNCC: 3 | RNVC: 2
AIM940380: RNCC: 5 | RNVC: 2

5 May 1999

5340-66-154-8788
Extension Drawer Slide

661548788
15011702-3150: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-66-155-0927
Dust And Moisture Seal Protective Cap

661550927
01-2330431: RNCC: 3 | RNVC: 2

30 Nov 2006

5340-66-112-3632
Access Cover

661123632
527.20.09.099: RNCC: 3 | RNVC: 2
527.20.09.099: RNCC: 3 | RNVC: 2

20 Aug 1990

5340-66-154-4684
Dust And Moisture Seal Protective Cap-Plug

661544684
CP250: RNCC: 3 | RNVC: 2

6 Jun 2006

5340-66-150-5617
Dust And Moisture Seal Protective Cover

661505617
NO PRIMARY REF 66-150-5617: RNCC: 3 | RNVC: 2
01438088: RNCC: 5 | RNVC: 2

16 Apr 2003

5340-66-154-9231
Clamp Assembly

661549231
471-51805-2: RNCC: 3 | RNVC: 2
504302: RNCC: 5 | RNVC: 2

9 Oct 2006

5340-66-156-5946
Mechanical Stop

661565946
P10009-2-11: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-66-155-4942
Plug

661554942
196630-08240: RNCC: 3 | RNVC: 2

2 Apr 2007

5340-66-147-1041
Protective Cap

661471041
305087B-12: RNCC: 3 | RNVC: 2
305087B-12: RNCC: 5 | RNVC: 2

14 Feb 2001

5340-66-044-7160
Angle Bracket

5340-66-149-0020
Buckle

661490020
5340-055: RNCC: 3 | RNVC: 1
5340-055: RNCC: 3 | RNVC: 1
DEF(AUST)2010: RNCC: 4 | RNVC: 1

5 Sep 2002

5340-66-147-6473
Dust And Moisture Seal Protective Cap

661476473
A55-997-B2180-0D00: RNCC: 3 | RNVC: 2
A53-997-B2180-0D00: RNCC: 5 | RNVC: 2

18 Oct 2001

5340-66-154-6390
Mounting Plate

661546390
471-20201-202: RNCC: 3 | RNVC: 2
511815: RNCC: 5 | RNVC: 2

1 Aug 2006

5340-66-136-4906
Electronic Equipment Hardware Kit

661364906
418/5/52580/000: RNCC: 3 | RNVC: 2
MX-F203: RNCC: 5 | RNVC: 2

4 Mar 1993

5340-66-128-4476
Pipe Clip

661284476
5154190051: RNCC: 3 | RNVC: 2
5154190051: RNCC: 5 | RNVC: 2

28 Oct 1987

5340-66-155-7476
Lock Bar

661557476
X40RH289M: RNCC: 3 | RNVC: 2

18 May 2007

5340-66-106-0179
Belt-Strap Keeper

661060179
ADE(M)183-25: RNCC: 3 | RNVC: 2

28 Mar 1982

5340-66-151-6937
Access Cover

661516937
LTE-A16-0004: RNCC: 3 | RNVC: 1
LTE-A16-0004-01: RNCC: 3 | RNVC: 2

21 Aug 2003

5340-66-157-4290
General Purpose Access Door

661574290
468-02-0202A3: RNCC: 3 | RNVC: 2

19 Nov 2008

5340-66-146-1943
Mounting Bracket

661461943
472 5537-08: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-66-157-4878
Headless Straight Rod

661574878
V02-06-01-03-01: RNCC: 3 | RNVC: 2

30 Nov 2008

5340-66-152-0214
Mounting Bracket

661520214
BMA-A05-1300: RNCC: 3 | RNVC: 2

14 Sep 2004

5340-66-153-4123
Mounting Plate

661534123
15012772-01: RNCC: 3 | RNVC: 2

12 Aug 2005

5340-66-154-7053
Retaining Band

661547053
471-51811-12: RNCC: 3 | RNVC: 2
510476: RNCC: 5 | RNVC: 2

17 Aug 2006

5340-66-158-2417
Mounting Bracket

661582417
BMU-A05-3185-01: RNCC: 3 | RNVC: 2

8 Oct 2009

5340-66-142-4622
Mounting Plate

661424622
471-90423-11-62: RNCC: 3 | RNVC: 2
517415: RNCC: 3 | RNVC: 2

20 Aug 1996

5340-66-155-2786
Access Cover

661552786
MR-0036: RNCC: 3 | RNVC: 2

12 Feb 2007

5340-66-143-2782
Webbing Strap

661432782
8005-0007: RNCC: 3 | RNVC: 2

3 Apr 1998

5340-66-150-0746
Expansion Shield

661500746
NO PRIMARY REF 66-150-0746: RNCC: 3 | RNVC: 2
08798712: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-037-7514
Tee Hinge

660377514
ADE(V)94-157 ISSUE 1: RNCC: 3 | RNVC: 2

6 Nov 1970

5340-66-119-5543
Compression Cup

661195543
716/25-1-LEATHER CUP WASHER: RNCC: 3 | RNVC: 2

19 Dec 1983

5340-66-072-1778
Barrel Bolt

660721778
570-3IN: RNCC: 3 | RNVC: 1
ZENITH HBB1075CP: RNCC: 5 | RNVC: 2

5 Jul 1974

5340-66-153-5892
Butt Hinge Leaf

661535892
MS20001PH4-700: RNCC: 3 | RNVC: 2

22 Sep 2005

5340-66-149-7168
Turnbuckle

661497168
NO PRIMARY REF 66-149-7168: RNCC: 3 | RNVC: 2
00484789: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-143-0987
Mortise Lock

661430987
432-000: RNCC: 3 | RNVC: 2

5 May 1997

5340-66-144-3960
Webbing Strap

661443960
73245-2-40: RNCC: 3 | RNVC: 2

11 Dec 1998

5340-66-156-3774
Door Handle

661563774
LAN-MD-D0060: RNCC: 3 | RNVC: 2

13 Nov 2007

5340-66-133-6796
Butt Hinge

5340-66-149-5694

5340-66-024-7203
Access Cover

660247203
92100412: RNCC: 3 | RNVC: 2
9210-0412: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-152-2262
Access Cover

661522262
BMA-A05-1658-01: RNCC: 3 | RNVC: 2

21 Sep 2004

5340-66-145-4799
Filter Housing

661454799
608/2/57955/000: RNCC: 3 | RNVC: 2

28 Sep 1999

5340-66-159-4391
Shelf Bracket

661594391
998/2/93235/001: RNCC: 3 | RNVC: 2

14 Jul 2011

5340-66-157-6313
Mounting Bracket

661576313
DE253280050: RNCC: 3 | RNVC: 2

23 Jan 2009

5340-66-146-1125
Mounting Plate

661461125
472 6061-04: RNCC: 3 | RNVC: 2

21 Jan 2000

5340-66-154-8807
Access Cover

661548807
15008519: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-66-075-2398
Handwheel

660752398
MLF747: RNCC: 3 | RNVC: 2

15 Aug 2001

5340-66-148-4243
Winder

661484243
25-110-102: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-66-154-6171
Tongue

661546171
471-50806-113: RNCC: 3 | RNVC: 2
509421: RNCC: 5 | RNVC: 2

25 Jul 2006

5340-66-150-6045
Element

661506045
NO PRIMARY REF 66-150-6045: RNCC: 3 | RNVC: 2
07193509: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-155-8136
Access Cover

661558136
BMA-A05-0968-02: RNCC: 3 | RNVC: 2

6 Jun 2007

5340-66-161-0573
Webbing Strap

661610573
E849-015: RNCC: 3 | RNVC: 2
E849-015: RNCC: 5 | RNVC: 2

9 May 2013

5340-66-125-8999
Mounting Bracket

661258999
7LR-27111-01: RNCC: 3 | RNVC: 2

2 Jan 1992

5340-66-123-3118
Access Door Hinge

661233118
04-01-06: RNCC: 3 | RNVC: 2

25 Nov 1985

5340-66-132-0875
Clamping Catch

661320875
OM0-142377-C: RNCC: 3 | RNVC: 2
360408: RNCC: 3 | RNVC: 2

19 Apr 1989

5340-66-142-9774
Butt Hinge

661429774
658/2/05754/000: RNCC: 3 | RNVC: 2

2 May 1997

5340-66-160-2180
Mounting Bracket

661602180
BMA-A05-1468-01: RNCC: 3 | RNVC: 2

1 May 2012

5340-66-094-6817
Compression Cup

660946817
W15190-1H101-1: RNCC: 3 | RNVC: 2
1H101-1: RNCC: 5 | RNVC: 9

30 Jun 1977

5340-66-147-5239
Elastic Strap

661475239
OP 3508AS: RNCC: 3 | RNVC: 2

14 Jun 2001

5340-66-018-7144
Suction Cup

1 Jan 1968

5340-66-147-2193
Control Panel

661472193
LCH/A30040: RNCC: 3 | RNVC: 2

27 Nov 2000

5340-66-156-7104
Sealing Plug Assembly

661567104
BMF-A30-0031: RNCC: 3 | RNVC: 2
BMF-A30-0031-01: RNCC: 3 | RNVC: 2

4 Mar 2008

5340-66-146-9093
Crankarm

661469093
KH-AF: RNCC: 3 | RNVC: 2

4 Oct 2000

Load More Results