What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is a Hasp Staple?

A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

Hardware, Commercial - Australia (AU)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Australia (AU) - NCB is 66

Page 28 of 29

NSN Format for Hardware, Commercial
Codified by Australia

53	40	66	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Australia (AU)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 53 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 78 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 109 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 25 Items
Holder,Spring 26 Items
What is a Compression Cup? 11 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 43 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 85 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 54 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 27 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 249 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 36 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 87 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 39 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 11 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 16 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 15 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Rim Latch? 18 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Rim Lock? 13 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 12 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 17 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 17 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 18 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 103 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 11 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 59 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 14 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 14 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Plug Button? 12 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Corrosion Preventive Anode? 27 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 78 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 268 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 88 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 70 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 36 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 40 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 41 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Plain Solid Disk? 41 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 12 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 608 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 57 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 54 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 317 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 48 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 40 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 83 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Quick Release Plunger? 17 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 65 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 24 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 14 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 22 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 49 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 19 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 151 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 15 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 444 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 128 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 42 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 53 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 25 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 201 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 33 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 133 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 42 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 54 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Strapping? 28 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 75 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Screw Thread Insert And Tool Assortment? 18 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 28 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 18 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 740 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 11 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 14 Items
What is an Antipilferage Seal? 27 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 129 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Seal Retaining Plate? 29 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 47 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1862 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 15 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 11 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 10 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 766 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 27 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 65 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 79 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 71 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 22 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 12 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 14 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 35 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 50 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 28 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 15 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 20 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 11 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 83 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 138 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 393 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 38 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 11 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 22 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
What is a Key Blank? 22 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 10 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 114 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 11 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 20 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 12 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is a Bumper? 74 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 28 of 29

5340-66-139-5464
Equipment Main Rack

661395464
RA-12-001: RNCC: 3 | RNVC: 2

7 Jun 1994

5340-66-149-2002
Mounting Bracket

661492002
DE251570006: RNCC: 3 | RNVC: 2
02159-008: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-66-146-3924
Tie Rail

661463924
73265-2-29: RNCC: 3 | RNVC: 2

20 Apr 2000

5340-66-123-4530
Hinge

661234530
33-31296-5: RNCC: 3 | RNVC: 2

13 Dec 1985

5340-66-134-8325
Dust And Moisture Seal Protective Cap-Plug

661348325
Z0A33-11-90: RNCC: 3 | RNVC: 2

9 Jul 1990

5340-66-058-7382
Mortise Latch

660587382
3R35: RNCC: 3 | RNVC: 1
ML3R35/203: RNCC: 3 | RNVC: 2

23 Aug 1973

5340-66-146-1524
Support

661461524
536469 80: RNCC: 3 | RNVC: 2

1 Feb 2000

5340-66-156-3817
Strap Hinge Leaf

661563817
15010503: RNCC: 3 | RNVC: 2

14 Nov 2007

5340-66-157-4466
Mounting Bracket

661574466
V02-01-07-01-00: RNCC: 3 | RNVC: 2

25 Nov 2008

5340-66-158-1508
Handwheel

661581508
BDI 30400-1-1: RNCC: 3 | RNVC: 2

4 Sep 2009

5340-66-107-6770
Mounting Bracket

661076770
DE230010300-1: RNCC: 3 | RNVC: 2

20 Feb 1981

5340-66-124-9532
General Purpose Resilient Mount

661249532
M195-60: RNCC: 3 | RNVC: 2

13 Mar 1986

5340-66-149-1694
Webbing Strap

661491694
438B/D: RNCC: 3 | RNVC: 2

28 Jan 2003

5340-66-159-3504
Buckle

661593504
950-1099: RNCC: 3 | RNVC: 2
FAS1004: RNCC: 5 | RNVC: 2

14 Jun 2011

5340-66-150-2467
Hasp Staple

661502467
NO PRIMARY REF 66-150-2467: RNCC: 3 | RNVC: 2
04061401: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-159-8170
Block Clamp

661598170
BMA-V08-0011-01: RNCC: 3 | RNVC: 2

22 Feb 2012

5340-66-025-5339
Strap Fastener Loop

660255339
TSE(W)8-688: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-139-9394
Mounting Bracket

661399394
471-21209-303: RNCC: 3 | RNVC: 2

21 Sep 1994

5340-66-147-7937
Angle Bracket

661477937
F/2888-550-035F: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-035F: RNCC: 5 | RNVC: 2

24 Sep 2001

5340-66-154-6409
Loop Clamp

661546409
6-135-235: RNCC: 3 | RNVC: 2

1 Aug 2006

5340-66-122-5959
Access Cover

661225959
ADE(V)171-3: RNCC: 3 | RNVC: 2

14 May 1985

5340-66-157-4792
Angle Bracket

661574792
V103-PC-0001: RNCC: 3 | RNVC: 2

27 Nov 2008

5340-66-150-0251
Swivel Caster

661500251
NO PRIMARY REF 66-150-0251: RNCC: 3 | RNVC: 2
05064663: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-158-7584
Mounting Bracket

661587584
BMA-A10-0135-01: RNCC: 3 | RNVC: 2

28 Jul 2010

5340-66-161-2578
Mounting Plate

661612578
D-9419: RNCC: 3 | RNVC: 2

8 Aug 2013

5340-66-155-6934
Mounting Bracket

661556934
B006/6: RNCC: 3 | RNVC: 2

10 May 2007

5340-66-124-9529
General Purpose Resilient Mount

661249529
M503-20292-55: RNCC: 3 | RNVC: 2

13 Mar 1986

5340-66-146-4846
Contact Block

661464846
HW-F10: RNCC: 3 | RNVC: 2

26 May 2000

5340-66-141-3893
Mounting Bracket

661413893
D50683: RNCC: 3 | RNVC: 2

20 May 1995

5340-66-126-0772
Mounting Plate

661260772
EKJVTP: RNCC: 3 | RNVC: 2

25 Oct 1990

5340-66-159-5922
Bumper

661595922
A1-19550-117/5: RNCC: 3 | RNVC: 2

19 Oct 2011

5340-66-156-0470
Mounting Bracket

661560470
ARLM0704-1: RNCC: 3 | RNVC: 2

8 Aug 2007

5340-66-131-4498
Strap Assembly

661314498
DE580170676-1: RNCC: 3 | RNVC: 2

28 Oct 1988

5340-66-157-5168
Retaining Strap

661575168
V0507-CE-1425: RNCC: 3 | RNVC: 2

8 Dec 2008

5340-66-127-6619
Plain Solid Disk

661276619
STDP-4814-009 ITEM 51: RNCC: 3 | RNVC: 2

14 Nov 1986

5340-66-117-7268
General Purpose Resilient Mount

661177268
DF650/75SS2V: RNCC: 3 | RNVC: 2

28 Jun 1983

5340-66-156-5113
Angle Bracket

661565113
471-62810-146: RNCC: 3 | RNVC: 2
501425: RNCC: 5 | RNVC: 2

14 Dec 2007

5340-66-156-4389
Environme Tie Down

661564389
LAN-MD-D0110: RNCC: 3 | RNVC: 2

27 Nov 2007

5340-66-143-9063
Webbing Strap

661439063
DPD/4010/2033: RNCC: 3 | RNVC: 1

2 Sep 1997

5340-66-154-6997
Runner

661546997
471-50806-100T02: RNCC: 3 | RNVC: 2
509406: RNCC: 5 | RNVC: 2

16 Aug 2006

5340-66-159-1938
Mounting Bracket

661591938
042272A-00: RNCC: 3 | RNVC: 2

29 Mar 2011

5340-66-158-7641
Mounting Bracket

661587641
BMA-A13-0048-01: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-66-153-3150
Retaining Strap

661533150
DE252230010: RNCC: 3 | RNVC: 2

12 Jul 2005

5340-66-139-2747
Mounting Plate

661392747
SCES12165: RNCC: 3 | RNVC: 1
48519: RNCC: 3 | RNVC: 2
48519: RNCC: 5 | RNVC: 2
48519: RNCC: 5 | RNVC: 2

21 Jul 1994

5340-66-085-8859
Mounting Bracket

660858859
1Z68302: RNCC: 3 | RNVC: 2

27 Feb 1975

5340-66-136-4903
On Plastics Hinge

661364903
604/2/13743: RNCC: 3 | RNVC: 2

2 Mar 1993

5340-66-138-9752
Handle

661389752
8008-8604: RNCC: 3 | RNVC: 2
0056080088604: RNCC: C | RNVC: 1

21 Dec 1993

5340-66-155-0666
Dust And Moisture Seal Protective Cap

661550666
230123: RNCC: 3 | RNVC: 2

23 Nov 2006

5340-66-154-7359
Retaining Strap

661547359
15002093: RNCC: 3 | RNVC: 2

24 Aug 2006

5340-66-132-0613
Slide

661320613
37111108014/2: RNCC: 3 | RNVC: 2
371111018014: RNCC: 5 | RNVC: 1

17 Mar 1989

5340-66-144-7265
Strap Hinge Leaf

661447265
MHC1123-2: RNCC: 3 | RNVC: 2

8 Jan 1999

5340-66-158-0085
Manual Control Lever

661580085
JMS2002-52-1: RNCC: 3 | RNVC: 2

17 Jun 2009

5340-66-138-6841
Mounting Bracket

661386841
120270-01650: RNCC: 3 | RNVC: 2

16 Mar 1994

5340-66-151-0793
Manual Control Handle

661510793
HM-198: RNCC: 3 | RNVC: 2

20 May 2003

5340-66-156-0048
Corrosion Preventive Anode

661560048
AG-A0418: RNCC: 3 | RNVC: 2

23 Jul 2007

5340-66-147-7828
Suction Manifold

661477828
F/2888-560-005C: RNCC: 3 | RNVC: 2
Q EDE F/2888-560-005C: RNCC: 5 | RNVC: 2

18 Sep 2001

5340-66-160-8406
Mounting Bracket

661608406
1400-03-0300W2-P1: RNCC: 3 | RNVC: 2

31 Jan 2013

5340-66-142-8222
Mounting Bracket

661428222
658/2/05280/000: RNCC: 3 | RNVC: 2

23 Jan 1997

5340-66-154-5610
Door Lock Kits

661545610
940045: RNCC: 3 | RNVC: 2
074-940045: RNCC: 5 | RNVC: 2

6 Jul 2006

5340-66-160-8629
Mounting Bracket

661608629
P10473-09: RNCC: 3 | RNVC: 2

13 Feb 2013

5340-66-157-0181
Mounting Bracket

661570181
DE252990000: RNCC: 3 | RNVC: 2
AS/NZ 15949HA250: RNCC: 5 | RNVC: 1

4 Jul 2008

5340-66-152-5705
Mounting Bracket

661525705
RP400224/A/29: RNCC: 3 | RNVC: 2

16 Nov 2004

5340-66-158-6758
Mounting Plate

661586758
RAY184010-1: RNCC: 3 | RNVC: 2
RAY184010-1: RNCC: 5 | RNVC: 2

1 Jun 2010

5340-66-144-5223
Mounting Bracket

661445223
A209142-13F: RNCC: 3 | RNVC: 2

3 Dec 1998

5340-66-147-8874
Mounting Bracket

661478874
F/2888-570-012A: RNCC: 3 | RNVC: 2

29 Nov 2001

5340-66-164-7992

5340-66-164-8022

5340-66-139-4462
Electronic Equipment Hardware Kit

661394462
MX-F218: RNCC: 3 | RNVC: 2
DE530020000: RNCC: 3 | RNVC: 2

24 Jan 1995

5340-66-155-2836
Catch Strike

661552836
P10070-3: RNCC: 3 | RNVC: 2

14 Feb 2007

5340-66-037-1999
Clamp Stowage Compa

660371999
ADE(V)57-14: RNCC: 3 | RNVC: 2

23 Oct 1970

5340-66-155-9069
Mounting Bracket

661559069
471-50809-214T01: RNCC: 3 | RNVC: 2
502650: RNCC: 5 | RNVC: 2

27 Jun 2007

5340-66-161-2749
Access Cover

661612749
D4968-A149: RNCC: 3 | RNVC: 2

19 Aug 2013

5340-66-145-7627
Access Cover

661457627
489 5216-03: RNCC: 3 | RNVC: 2

22 Oct 1999

5340-66-142-6758
Lynch Pin

661426758
DSA-7-797-19: RNCC: 3 | RNVC: 2
DSA-7-797-19: RNCC: 3 | RNVC: 2

22 Jan 1997

5340-66-147-8715
Catch Strike

661478715
F/2888-550-040A: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-040A: RNCC: 5 | RNVC: 2

20 Nov 2001

5340-66-142-9096
Locating Block

661429096
658/2/06458/000: RNCC: 3 | RNVC: 2

27 Feb 1997

5340-66-130-3761
Sealing Disc

661303761
MEA 1307-6: RNCC: 3 | RNVC: 2

21 Apr 1988

5340-66-157-5317
Angle Bracket

661575317
V02-10-01-02-01: RNCC: 3 | RNVC: 2

11 Dec 2008

5340-66-122-0075
Cap Till Lock

661220075
242: RNCC: 3 | RNVC: 2
CAP TILL LOCK 2-3/4: RNCC: 3 | RNVC: 2

14 Jan 1985

5340-66-096-2828
Angle Bracket

660962828
446D2114-053B: RNCC: 3 | RNVC: 2

11 Dec 1977

5340-66-155-7359
Lock Plate

661557359
471-20207-429: RNCC: 3 | RNVC: 2
510357: RNCC: 5 | RNVC: 2

17 May 2007

5340-66-155-1603
Rod

661551603
275R-0170: RNCC: 3 | RNVC: 2

19 Dec 2006

5340-66-158-2404
Mounting Plate

661582404
BMU-A18-3012-01: RNCC: 3 | RNVC: 2
BMU-A18-3012: RNCC: 5 | RNVC: 2

8 Oct 2009

5340-66-161-2653
Cushioning Pad

661612653
1600-03-0300C1-03: RNCC: 3 | RNVC: 2
QVRL1600030300C103: RNCC: 5 | RNVC: 2

12 Aug 2013

5340-66-150-4043
Strapping

661504043
NO PRIMARY REF 66-150-4043: RNCC: 3 | RNVC: 2
05667215: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-158-2309
Mounting Bracket

661582309
BMU-A07-2018-01: RNCC: 3 | RNVC: 2
BMU-A07-2018: RNCC: 5 | RNVC: 2

6 Oct 2009

5340-66-106-3643
Loop Clamp

661063643
LS4605-2-16: RNCC: 3 | RNVC: 2

18 Jul 1980

5340-66-158-7828
Mounting Plate

661587828
WMP-001-V1: RNCC: 3 | RNVC: 2
WMP-001-V1: RNCC: 5 | RNVC: 2

30 Jul 2010

5340-66-153-6680
Webbing Strap

661536680
9125D05044001-004: RNCC: 3 | RNVC: 2

11 Oct 2005

5340-66-150-4030
Strapping

661504030
NO PRIMARY REF 66-150-4030: RNCC: 3 | RNVC: 2
05775411: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-156-5579
Track Stop

661565579
BMA-A07-0094: RNCC: 3 | RNVC: 2
BMA-A07-0094-01: RNCC: 3 | RNVC: 2

16 Jan 2008

5340-66-010-6068
Spring Tension Clip

660106068
TSE(V)93-883: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-154-9897
Drive Pin

661549897
2623-008-021: RNCC: 3 | RNVC: 2

2 Nov 2006

5340-66-158-7153
Handle Grip

661587153
8005-0063: RNCC: 3 | RNVC: 2

24 Jun 2010

5340-66-101-3393
Rod End Connector

661013393
45H1902 ITEM 3: RNCC: 3 | RNVC: 2

4 Apr 1979

5340-66-135-2112
Door Handle

661352112
RAH 3456-1: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-66-155-5996
Access Cover

661555996
016-259-080-420-000: RNCC: 3 | RNVC: 2

23 Apr 2007

5340-66-135-2699
Dust And Moisture Seal Boot

661352699
345-2:1 NO11: RNCC: 3 | RNVC: 2
345-2:1 NO11: RNCC: 5 | RNVC: 2

11 Dec 1991

5340-66-150-7850
Access Cover

661507850
LTA-A05-039-001: RNCC: 3 | RNVC: 2

3 Apr 2003

5340-66-151-1520
Access Door Hinge

661511520
LTA-A02-023: RNCC: 3 | RNVC: 1
LTA-A02-0381-01: RNCC: 3 | RNVC: 2

24 Jun 2003

5340-66-153-3326
Mounting Plate

661533326
LTE-A07-0001-01: RNCC: 3 | RNVC: 2

18 Jul 2005

5340-66-142-8223
Mounting Bracket

661428223
658/2/05287: RNCC: 3 | RNVC: 2

23 Jan 1997

5340-66-153-4061
Mounting Bracket

661534061
15012724-02: RNCC: 3 | RNVC: 2

11 Aug 2005

5340-66-153-9534
Handle

661539534
M0228FH-MV30-08.00 NO.5: RNCC: 3 | RNVC: 2

21 Dec 2005

5340-66-142-9106
General Purpose Access Door

661429106
658/2/05182/001: RNCC: 3 | RNVC: 2

19 Mar 1997

5340-66-042-3080
Angle Bracket

660423080
546-6456-002: RNCC: 3 | RNVC: 2

28 Jul 1971

5340-66-038-8120
Butt Hinge

660388120
R36: RNCC: 3 | RNVC: 2

12 Mar 1971

5340-66-156-5947
Mechanical Stop

661565947
P10009-2-16: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-66-017-5728
Loop Clamp

660175728
NO PRIMARY REF 66-017-5728: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-109-0985
Pipe Hanger

661090985
S172-12: RNCC: 3 | RNVC: 2

29 Nov 1980

5340-66-147-6766
Dust And Moisture Seal Protective Cap

661476766
B98V: RNCC: 3 | RNVC: 2

27 Nov 2001

5340-66-099-5531
Double Angle Bracket

660995531
A10031: RNCC: 3 | RNVC: 2

22 Dec 1978

5340-66-159-7750
Dust And Moisture Seal Protective Cap

661597750
TF02111-1: RNCC: 3 | RNVC: 2
PT047-50R: RNCC: 5 | RNVC: 2

17 Feb 2012

5340-66-157-9324
Wedge Support

661579324
471-90037-104: RNCC: 3 | RNVC: 2
1266895: RNCC: 5 | RNVC: 2
471-90037-104: RNCC: 5 | RNVC: 2

20 May 2009

5340-66-152-3274
Mounting Bracket

661523274
DAXADJ/BH: RNCC: 3 | RNVC: 2
MLC-0464: RNCC: 5 | RNVC: 2

31 Aug 2004

5340-66-150-0674
Padlock

661500674
NO PRIMARY REF 66-150-0674: RNCC: 3 | RNVC: 2
03842789: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-156-4937
Webbing Strap

661564937
10006014-100: RNCC: 3 | RNVC: 2

11 Dec 2007

5340-66-154-9628
Manual Control Lever

661549628
ARLM0798-1: RNCC: 3 | RNVC: 2

24 Oct 2006

5340-66-153-9654
Manual Control Handle

661539654
M0228FH-MV50-06.00/ITEM:5: RNCC: 3 | RNVC: 2

5 Jan 2006

5340-66-142-9041
Mounting Bracket

661429041
658/2/06459/000: RNCC: 3 | RNVC: 2

10 Feb 1997

5340-66-143-1458
Dust And Moisture Seal Protective Cover

661431458
138100 16440 K 0001/11: RNCC: 3 | RNVC: 2
9051214068: RNCC: 5 | RNVC: 2

28 Jan 1998

5340-66-157-4281
General Purpose Access Door

661574281
468-02-0201A3: RNCC: 3 | RNVC: 2

19 Nov 2008

5340-66-150-4041
Strapping

661504041
NO PRIMARY REF 66-150-4041: RNCC: 3 | RNVC: 2
05666915: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-140-6752
Electronic Equipment Hardware Kit

661406752
MX-F236: RNCC: 3 | RNVC: 2
DE530020030: RNCC: 3 | RNVC: 2

28 Feb 1996

5340-66-146-3257
Circuit Brea Cover

661463257
2386-45290-00: RNCC: 3 | RNVC: 2
2386-45290-00: RNCC: 5 | RNVC: 2

6 Apr 2000

5340-66-156-6655
Headless Straight Rod

661566655
BMA-A05-1473-01: RNCC: 3 | RNVC: 2
BMA-A05-1473-01: RNCC: 5 | RNVC: 2

22 Feb 2008

5340-66-151-3655
Bow Handle

661513655
NALM00159-17: RNCC: 3 | RNVC: 2

3 Nov 2004

5340-66-154-6776
Access Cover

661546776
VTR251-2TSUB14F4T19-7IIINM40W3P-: RNCC: 3 | RNVC: 1

11 Aug 2006

5340-66-158-7804
Mounting Bracket

661587804
BMA-A10-0150-01: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-66-155-3123
Mounting Plate

661553123
471-41243-204: RNCC: 3 | RNVC: 2
512514: RNCC: 5 | RNVC: 2

27 Feb 2007

5340-66-161-2983
Access Cover

661612983
3040N164-003: RNCC: 3 | RNVC: 2

27 Aug 2013

5340-66-146-9152
Weather Shield

661469152
ZS-100: RNCC: 3 | RNVC: 2

4 Oct 2000

5340-66-160-9028
Cushioning Pad

661609028
15020148: RNCC: 3 | RNVC: 2

27 Feb 2013

5340-66-153-2892
Mounting Bracket

661532892
A210 0330: RNCC: 3 | RNVC: 2

6 Jul 2005

5340-66-158-4713
Damper Blade

661584713
SODFAB01/3: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-66-142-9607
Spacer Block

661429607
658/2/06504/002: RNCC: 3 | RNVC: 2

20 Mar 1997

5340-66-160-2157
Bumper

661602157
1520: RNCC: 3 | RNVC: 2
1520: RNCC: 5 | RNVC: 1

30 Apr 2012

5340-66-100-5228
Support Hook

661005228
ADE(A)264-30: RNCC: 3 | RNVC: 2

8 Jul 1979

5340-66-143-3549
Escutcheon Plate

661433549
1545-D-0116: RNCC: 3 | RNVC: 2

22 Apr 1998

5340-66-021-4238
Expansion Shield

660214238
L0XIN3-4IN: RNCC: 3 | RNVC: 2
12-84476: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-136-4836
Surface Mount Latch

661364836
640/2/28326: RNCC: 3 | RNVC: 2

9 Feb 1993

5340-66-142-6742
Loop Clamp

661426742
DSA-7-785-23: RNCC: 3 | RNVC: 2
DSA-7-785-23: RNCC: 3 | RNVC: 2

22 Jan 1997

5340-66-156-1417
Access Cover

661561417
RP407524/A/29: RNCC: 3 | RNVC: 2
RP407524/A/29: RNCC: 5 | RNVC: 2

5 Sep 2007

5340-66-088-7042
Spacing Threaded Standoff

660887042
ADE(W)67-1844ISSUE1: RNCC: 3 | RNVC: 2

14 Jun 1975

5340-66-148-4191
Support Disk

661484191
C160-05338-2937: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-66-154-8421
Dust And Moisture Seal Protective Cap

661548421
V15-18: RNCC: 3 | RNVC: 2

15 Sep 2006

5340-66-128-5862
Retaining Hook

661285862
R392954: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-66-148-9008
Stand Base

661489008
DZB210T: RNCC: 3 | RNVC: 2

20 Nov 2002

5340-66-147-8918
Support Block

661478918
F/2888-570-011B: RNCC: 3 | RNVC: 2

4 Dec 2001

5340-66-147-8618
Extension Pole

661478618
F/2888-550-029F: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-029F: RNCC: 5 | RNVC: 2

27 Sep 2001

5340-66-147-8694
Throttle Extension

661478694
F/2888-515-001E: RNCC: 3 | RNVC: 2
Q EDE F/2888-515-001E: RNCC: 5 | RNVC: 2

16 Oct 2001

5340-66-140-4153
Handwheel

661404153
FE85089A-125S: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-66-093-7920
Marine Door Catch

660937920
363-29SH6-12: RNCC: 3 | RNVC: 2

23 Feb 1977

5340-66-155-2272
Stacking Plate

661552272
471-20065-110: RNCC: 3 | RNVC: 2
521387: RNCC: 5 | RNVC: 2

29 Jan 2007

5340-66-159-1429
Mounting Bracket

661591429
042414A-00: RNCC: 3 | RNVC: 2

7 Mar 2011

5340-66-144-5465
Webbing Strap

661445465
AS/NZS 4380:1996: RNCC: 3 | RNVC: 1
11-240503A-20: RNCC: 3 | RNVC: 2

4 Dec 1998

5340-66-144-6229
Webbing Strap

661446229
AS/NZS 4380:1996: RNCC: 3 | RNVC: 1
11-240503B-130: RNCC: 3 | RNVC: 2
11-240503B-130: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-66-156-3321
Webbing Strap

661563321
BMF-A05-1522-01: RNCC: 3 | RNVC: 2

31 Oct 2007

5340-66-157-5224
Tie Down Adapter

661575224
V0507-CE-1528: RNCC: 3 | RNVC: 2

9 Dec 2008

5340-66-146-1990
Mounting Plate

661461990
472 8043-01: RNCC: 3 | RNVC: 2

10 Feb 2000

5340-66-160-6827
Mounting Plate

661606827
90-3001-03: RNCC: 3 | RNVC: 2

17 Oct 2012

5340-66-136-3560
Mounting Bracket

661363560
DE(INT)193-10: RNCC: 3 | RNVC: 2

12 Sep 1992

5340-66-160-2115
Retaining Strap

661602115
56306: RNCC: 3 | RNVC: 2
121034: RNCC: 5 | RNVC: 2

27 Apr 2012

5340-66-153-4062
Multiple Angle Bracket

661534062
15013120: RNCC: 3 | RNVC: 2

11 Aug 2005

5340-66-142-2795
General Purpose Resilient Mount

661422795
P471-90200-101T04: RNCC: 3 | RNVC: 2

4 May 1996

5340-66-036-9126
Hand Crank

660369126
ADE(M)106-17: RNCC: 3 | RNVC: 2

21 Oct 1970

5340-66-128-7280
Angle Bracket

661287280
MRC8524: RNCC: 3 | RNVC: 2
0068-00-000-8524: RNCC: C | RNVC: 1

13 Oct 1993

5340-66-157-3178
Access Cover

661573178
MM-0080-T335: RNCC: 3 | RNVC: 2

8 Oct 2008

5340-66-137-1031
General Purpose Resilient Mount

661371031
98512/1001: RNCC: 3 | RNVC: 2

19 Aug 1992

5340-66-158-2251
Mounting Bracket

661582251
K11477-402: RNCC: 3 | RNVC: 2

5 Oct 2009

5340-66-154-6774
Access Cover

661546774
VTR251-2TSUB14F4T19-7IIINM40W3P-: RNCC: 3 | RNVC: 1

11 Aug 2006

5340-66-139-9395
Clamp-Shore Connect

661399395
471-21209-304: RNCC: 3 | RNVC: 2

21 Sep 1994

5340-66-157-4484
Mounting Bracket

661574484
V02-01-07-00-00: RNCC: 3 | RNVC: 2

25 Nov 2008

5340-66-141-0093
General Purpose Resilient Mount

661410093
339563598: RNCC: 3 | RNVC: 2
H63-146-95-125-4FF: RNCC: 3 | RNVC: 2

8 Aug 1995

5340-66-147-8794
Mounting Bracket

661478794
F/2888-575-001A: RNCC: 3 | RNVC: 2

23 Nov 2001

5340-66-154-8018
Double Angle Bracket

661548018
471-60801-116: RNCC: 3 | RNVC: 2
506686: RNCC: 5 | RNVC: 2

7 Sep 2006

5340-66-160-6801
Corrosion Preventive Anode

661606801
CDA-5S TYPE 1: RNCC: 3 | RNVC: 2
SML000414: RNCC: 5 | RNVC: 2
CDA-5S TYPE 1: RNCC: 5 | RNVC: 2

15 Oct 2012

5340-66-033-4216
Strap-Rope-Ca Loop

660334216
LS234600: RNCC: 3 | RNVC: 2

9 Dec 1969

5340-66-156-4523
Dust And Moisture Seal Protective Cover

661564523
LAN-MD-D0104: RNCC: 3 | RNVC: 2

29 Nov 2007

5340-66-146-0894
Mounting Bracket

661460894
438 4178-01: RNCC: 3 | RNVC: 2

13 Jan 2000

5340-66-151-5790
Mounting Bracket

661515790
LTA-A09-001: RNCC: 3 | RNVC: 1
LTA-A09-001-001: RNCC: 3 | RNVC: 2

21 Jul 2003

5340-66-145-6852
General Purpose Resilient Mount

661456852
LTA-H09-005-001: RNCC: 3 | RNVC: 2
LTA09007/S: RNCC: 3 | RNVC: 2
SE-1100-7: RNCC: 3 | RNVC: 2

15 Dec 1999

5340-66-139-8322
General Purpose Resilient Mount

661398322
GB530-NR2.5-M20-FM-0: RNCC: 3 | RNVC: 2
WD1429/15: RNCC: 3 | RNVC: 2
WD1430/15: RNCC: 3 | RNVC: 2

29 Aug 1994

5340-66-164-7691

5340-66-154-4421
Angle Bracket

661544421
LTA14095: RNCC: 3 | RNVC: 2

29 May 2006

5340-66-164-7949

5340-66-157-5507
Loop Clamp

661575507
100883: RNCC: 3 | RNVC: 2
100883: RNCC: 5 | RNVC: 2

16 Dec 2008

5340-66-149-1088
Mounting Bracket

661491088
02159-003-C: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-66-150-0766
Expansion Shield

661500766
NO PRIMARY REF 66-150-0766: RNCC: 3 | RNVC: 2
01793604: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-157-4626
Webbing Strap

661574626
468-B8-1250: RNCC: 3 | RNVC: 2

26 Nov 2008

5340-66-138-8252
Manual Control Handle

661388252
196640-12410-1: RNCC: 3 | RNVC: 2

26 Apr 1994

5340-66-157-4646
Mounting Bracket

661574646
V01-01-20-01-01: RNCC: 3 | RNVC: 2

26 Nov 2008

5340-66-150-0669
Padlock

661500669
NO PRIMARY REF 66-150-0669: RNCC: 3 | RNVC: 2
03381358: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-150-6048
Stand Grinder

661506048
NO PRIMARY REF 66-150-6048: RNCC: 3 | RNVC: 2
08258906: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-130-0686
Manual Control Lever

661300686
178 010-1233 3: RNCC: 3 | RNVC: 2
178 010 1233 3: RNCC: 5 | RNVC: 2

24 Aug 1987

5340-66-156-5240
Mounting Bracket

661565240
471-62810-129: RNCC: 3 | RNVC: 2
501408: RNCC: 5 | RNVC: 2

18 Dec 2007

5340-66-108-4917
Door Handle

661084917
41026: RNCC: 3 | RNVC: 2

22 May 1981

5340-66-153-2692
Mounting Bracket

661532692
A210 0337: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-150-3676
Webbing Strap

661503676
NO PRIMARY REF 66-150-3676: RNCC: 3 | RNVC: 2
00723316: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-155-5271
Manual Control Handle

661555271
471-30466-700: RNCC: 3 | RNVC: 2
501787: RNCC: 5 | RNVC: 2

11 Apr 2007

5340-66-157-4093
Double Angle Bracket

661574093
468-01-0000C1-01: RNCC: 3 | RNVC: 2

12 Nov 2008

5340-66-151-1664
Loop Clamp

661511664
LTA2403: RNCC: 3 | RNVC: 2
LTE-A16-0001 ITEM26: RNCC: 5 | RNVC: 2

27 Jun 2003

5340-66-160-3885
Mounting Bracket

661603885
ID32-230: RNCC: 3 | RNVC: 2

4 Jul 2012

5340-66-156-2850
Mounting Plate

661562850
471-40240-103: RNCC: 3 | RNVC: 2
516410: RNCC: 5 | RNVC: 2

22 Oct 2007

5340-66-161-0579
Access Cover

661610579
BMP-A05-3032-01: RNCC: 3 | RNVC: 2

9 May 2013

5340-66-146-3832
Thermostat-Griddle

661463832
015533: RNCC: 3 | RNVC: 2

19 Apr 2000

5340-66-155-9199
Mounting Bracket

661559199
ADF041-MC8175-310: RNCC: 3 | RNVC: 2

28 Jun 2007

5340-66-014-3802
Luggage Handle

660143802
NO PRIMARY REF 66-014-3802: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-139-9291
General Purpose Resilient Mount

661399291
NEW 2C CLASS 8: RNCC: 3 | RNVC: 2
CLASS 8: RNCC: 3 | RNVC: 2

14 Sep 1994

5340-66-157-4623
Webbing Strap

661574623
468-B6-1000: RNCC: 3 | RNVC: 2

26 Nov 2008

5340-66-157-8691
Sealing Plug Assembly

661578691
BMA-A19-0172-01: RNCC: 3 | RNVC: 2

28 Apr 2009

5340-66-085-8609
Hinged Hasp

660858609
NO PRIMARY REF 66-085-8609: RNCC: 3 | RNVC: 2

7 May 1976

5340-66-150-2043
Support Hook

661502043
NO PRIMARY REF 66-150-2043: RNCC: 3 | RNVC: 2
05973310: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-144-0506
Nonmetallic Bumper

661440506
ASTMD1056SC43-5-16X1IN: RNCC: 3 | RNVC: 2

3 Jun 1998

5340-66-151-4328
Loop Clamp

661514328
EBU-0009: RNCC: 3 | RNVC: 2

8 Dec 2003

5340-66-136-3757
Dual Roller Bracket

661363757
NR2306: RNCC: 3 | RNVC: 2

21 Oct 1992

5340-66-158-3031
Electronic Equipment Hardware Kit

661583031
FA267-0: RNCC: 3 | RNVC: 2

4 Nov 2009

5340-66-153-7740
Loop Clamp

661537740
943469-7: RNCC: 3 | RNVC: 2
943469-7: RNCC: 5 | RNVC: 2
943469-7: RNCC: 5 | RNVC: 2

26 Oct 2005

5340-66-148-5054
Blank Panel

661485054
OED-1749-18-28: RNCC: 3 | RNVC: 2

21 May 2002

5340-66-151-1699
Mounting Bracket

661511699
LTA-A20-0096-01: RNCC: 3 | RNVC: 2
LTA-A20-0096: RNCC: 5 | RNVC: 2

1 Jul 2003

5340-66-143-4858
Catch Strike

661434858
640/2/34283/000: RNCC: 3 | RNVC: 2

19 May 1998

5340-66-151-1532
Mounting Bracket

661511532
LTA-A05-267: RNCC: 3 | RNVC: 1
LTA-A05-267-001: RNCC: 3 | RNVC: 2

24 Jun 2003

5340-66-155-2413
Metal Grille

661552413
471-30022-118: RNCC: 3 | RNVC: 2
514018: RNCC: 5 | RNVC: 2

5 Feb 2007

5340-66-149-2912
Webbing Strap

661492912
NO PRIMARY REF 66-149-2912: RNCC: 3 | RNVC: 2
86639433: RNCC: 5 | RNVC: 2

1 Apr 2003

5340-66-119-4963
Rubbe Bushing Mould

661194963
TOOLING FOR 5340-99-923-9372: RNCC: 3 | RNVC: 2

29 Nov 1983

5340-66-154-9876
Access Cover

661549876
2732-007-049: RNCC: 3 | RNVC: 2

1 Nov 2006

5340-66-143-1060
Dust And Moisture Seal Protective Cap

661431060
916-000446: RNCC: 3 | RNVC: 2

14 May 1997

5340-66-146-3162
Breather Assembly

661463162
2318-96660-00: RNCC: 3 | RNVC: 2
2318-96660-00: RNCC: 5 | RNVC: 2

4 Apr 2000

5340-66-147-8627
Webbing Strap

661478627
C40-A81-001: RNCC: 3 | RNVC: 2

27 Sep 2001

5340-66-085-8676
Plain Solid Disk

660858676
NO PRIMARY REF 66-085-8676: RNCC: 3 | RNVC: 2

7 May 1976

5340-66-146-3273
Mux Card Clamp

661463273
2386-47890-00: RNCC: 3 | RNVC: 2
2386-47890-00: RNCC: 5 | RNVC: 2

6 Apr 2000

5340-66-147-7365
Mounting Plate

661477365
BT-0415X051-D: RNCC: 3 | RNVC: 2

31 Jul 2001

5340-66-131-6458
Protective A Cover

661316458
640/1/30585: RNCC: 3 | RNVC: 2

11 Jan 1989

5340-66-147-6141
General Purpose Resilient Mount

661476141
LTA08109/S: RNCC: 3 | RNVC: 2
M503-521341: RNCC: 3 | RNVC: 2

18 Sep 2001

5340-66-154-6392
General Purpose Resilient Mount

661546392
471-20201-5: RNCC: 3 | RNVC: 2
511827: RNCC: 5 | RNVC: 2

1 Aug 2006

5340-66-146-3291
Top Spacer

661463291
73016-3-42: RNCC: 3 | RNVC: 2

7 Apr 2000

5340-66-156-2837
Access Cover

661562837
471-41498-13: RNCC: 3 | RNVC: 2
508069: RNCC: 5 | RNVC: 2

22 Oct 2007

5340-66-148-3834
Adaptor Assembly

661483834
Q EDE PNEF/43 125 0628: RNCC: 3 | RNVC: 2
431250628: RNCC: 3 | RNVC: 2
Q EDE PNEF/43 125 0628: RNCC: 5 | RNVC: 2

27 Feb 2002

5340-66-116-6095
Dust And Moisture Seal Protective Cap

661166095
29000/397: RNCC: 2 | RNVC: 2
29000/397: RNCC: 3 | RNVC: 2
29000/397: RNCC: 3 | RNVC: 2
29000/397-1: RNCC: C | RNVC: 1

23 Feb 1983

5340-66-146-8975
Coup Locking Lever

661468975
20595-04: RNCC: 3 | RNVC: 2

22 Sep 2000

5340-66-123-5321
Cross Welded Frame

661235321
750-05.3000-16: RNCC: 3 | RNVC: 2

13 Feb 1998

5340-66-093-6948
Access Cover

660936948
163P/0215/014 TYPE J: RNCC: 3 | RNVC: 2

26 May 1978

5340-66-161-3164
Bumper

661613164
21-1-0386: RNCC: 3 | RNVC: 2

10 Sep 2013

5340-66-156-3530
Mechanical Stop

661563530
471-51482-107: RNCC: 3 | RNVC: 2
522281: RNCC: 5 | RNVC: 2

5 Nov 2007

5340-66-143-8040
Ass Webbing Strap

661438040
1804-2-G78/1209 X 3.5 MTR: RNCC: 3 | RNVC: 2

1 Aug 1997

5340-66-152-3019
Permanent Magnet

661523019
NO PRIMARY REF 66-152-3019: RNCC: 3 | RNVC: 2
09160701: RNCC: 5 | RNVC: 2

18 Jun 2004

5340-66-153-6243
Access Cover

661536243
LTA-A12-0150: RNCC: 3 | RNVC: 2

3 Oct 2005

5340-66-154-8164
Mounting Bracket

661548164
471-50806-144T01: RNCC: 3 | RNVC: 2
509455: RNCC: 5 | RNVC: 2

12 Sep 2006

5340-66-157-2817
Leakproof Seal Plug

661572817
WF3151X8: RNCC: 3 | RNVC: 2
9032-WF3151X8: RNCC: 3 | RNVC: 2
9032-3151X8: RNCC: 3 | RNVC: 9

25 Sep 2008

5340-66-150-0223
Swivel Caster

661500223
NO PRIMARY REF 66-150-0223: RNCC: 3 | RNVC: 2
04803407: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-018-2080
General Purpose Resilient Mount

660182080
ADE(V)225-383: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-133-8312
Mounting Bracket

661338312
MB-53: RNCC: 3 | RNVC: 2
MB-53: RNCC: 5 | RNVC: 2

1 Aug 1997

5340-66-138-5659
General Purpose Resilient Mount

661385659
GB530-NR3-NF: RNCC: 3 | RNVC: 2
WD1420/10: RNCC: 5 | RNVC: 2

7 Feb 1994

5340-66-156-5575
Luggage Lock

661565575
FA33R19: RNCC: 3 | RNVC: 2

16 Jan 2008

5340-66-158-2807
Seal Retaining Plate

661582807
BDI 30400-3-10: RNCC: 3 | RNVC: 2

23 Oct 2009

5340-66-144-6368
Buckle

661446368
380-0816: RNCC: 3 | RNVC: 2
HYM949: RNCC: 5 | RNVC: 2

9 Feb 1999

5340-66-142-9642
Angle Bracket

661429642
658/2/05347/000: RNCC: 3 | RNVC: 2

7 Apr 1997

5340-66-155-8925
Angle Bracket

661558925
471-60801-148: RNCC: 3 | RNVC: 2
506723: RNCC: 5 | RNVC: 2

26 Jun 2007

5340-66-156-5116
Mounting Bracket

661565116
471-62810-149: RNCC: 3 | RNVC: 2
501428: RNCC: 5 | RNVC: 2

17 Dec 2007

5340-66-154-0983
Mounting Bracket

661540983
47120117714-101: RNCC: 3 | RNVC: 2

22 Feb 2006

5340-66-154-7052
Retaining Band

661547052
471-51811-11: RNCC: 3 | RNVC: 2
510465: RNCC: 5 | RNVC: 2

17 Aug 2006

5340-66-159-2697
Webbing Strap

661592697
1100-00-0100C7: RNCC: 3 | RNVC: 2
QVRL1100000100C7: RNCC: 5 | RNVC: 2
1100-00-0100C7: RNCC: 6 | RNVC: 9

11 May 2011

5340-66-151-7183
Mounting Plate

661517183
MLC-0555: RNCC: 3 | RNVC: 2

24 Nov 2003

5340-66-160-8531
Mounting Bracket

661608531
1400-02-0302W4: RNCC: 3 | RNVC: 2

7 Feb 2013

5340-66-146-4039
Dust And Moisture Seal Protective Cap

661464039
DCR-04-A-12-3A: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

8 May 2000

5340-66-158-6431
Electronic Equipment Hardware Kit

661586431
RM-35: RNCC: 3 | RNVC: 2

6 May 2010

5340-66-152-3077
General Purpose Resilient Mount

661523077
BM581156: RNCC: 3 | RNVC: 2

1 Apr 2005

5340-66-125-3476
General Purpose Access Door

661253476
DE580160476: RNCC: 3 | RNVC: 2

18 Mar 1986

5340-66-146-2058
Mounting Bracket

661462058
487 0109-24: RNCC: 3 | RNVC: 2

14 Feb 2000

5340-66-157-9301
Wedge Support

661579301
471-90037-102: RNCC: 3 | RNVC: 2
1266883: RNCC: 5 | RNVC: 2
471-90037-102: RNCC: 5 | RNVC: 2

19 May 2009

5340-66-147-7455
Thigh Strap

661477455
DU-012-A: RNCC: 3 | RNVC: 2
DU-012-A: RNCC: 5 | RNVC: 2

1 Aug 2001

5340-66-117-7292
Handwheel

661177292
613-289 SHEET 2: RNCC: 3 | RNVC: 1
661-69: RNCC: 5 | RNVC: 2

28 Jun 1983

5340-66-144-4104
Frame Fixing Clamp

661444104
73156-3-16: RNCC: 3 | RNVC: 2

7 Sep 1998

5340-66-155-4763
Mounting Bracket

661554763
196630-12052: RNCC: 3 | RNVC: 2

30 Mar 2007

5340-66-143-9067
Webbing Strap

661439067
DPD/4010/2033: RNCC: 3 | RNVC: 1

3 Sep 1997

5340-66-158-7481
Angle Bracket

661587481
P10035-18-03: RNCC: 3 | RNVC: 2

23 Jul 2010

5340-66-028-8684
Dust And Moisture Seal Boot

660288684
ASF7960-25: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-126-4635
Snap Hook

661264635
361-20: RNCC: 3 | RNVC: 2
465-56: RNCC: 3 | RNVC: 2

21 Mar 1991

5340-66-150-1410
Earplugs E.A.R Expr

661501410
NO PRIMARY REF 66-150-1410: RNCC: 3 | RNVC: 2
00969238: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-159-2043
Mounting Bracket

661592043
MH-A528-0096-A3: RNCC: 3 | RNVC: 2

31 Mar 2011

5340-66-153-9001
Mounting Bracket

661539001
FFG35/439/DM/8700021-2: RNCC: 3 | RNVC: 2

28 Nov 2005

5340-66-147-6161
Manual Control Handle

661476161
16241G103-10-2: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-66-145-4802
Corner Protector

661454802
608/1/57718/000: RNCC: 3 | RNVC: 2

28 Sep 1999

5340-66-147-7689
Hydrocarbon Sensor

661477689
65-4009L-01: RNCC: 3 | RNVC: 1
65-4015LH: RNCC: 3 | RNVC: 2

4 Sep 2001

5340-66-157-4520
Mounting Plate

661574520
468-02-0202C-02: RNCC: 3 | RNVC: 2

25 Nov 2008

5340-66-155-6163
Mounting Bracket

661556163
BMA-A05-1662-01: RNCC: 3 | RNVC: 2

24 Apr 2007

5340-66-143-3943
Top Panel

661433943
491994-01: RNCC: 3 | RNVC: 2

22 Apr 1998

5340-66-160-4257
Access Cover

661604257
BMA-A12-0125-01: RNCC: 3 | RNVC: 2

19 Jul 2012

5340-66-156-7558
General Purpose Resilient Mount

661567558
E2271: RNCC: 3 | RNVC: 2
V01-03-00-00-02: RNCC: 5 | RNVC: 2

19 Mar 2008

5340-66-150-4040
Strapping

661504040
NO PRIMARY REF 66-150-4040: RNCC: 3 | RNVC: 2
05666818: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-034-9617
Handle Bow

660349617
8557-1-22: RNCC: 3 | RNVC: 2

14 Apr 1960

5340-66-142-9613
Mounting Bracket

661429613
AS 1204: RNCC: 3 | RNVC: 1
658/2/06425/005: RNCC: 3 | RNVC: 2

20 Mar 1997

5340-66-154-2742
Helical Compression Spring Seat

661542742
S0G07A1E1837-712: RNCC: 3 | RNVC: 2

11 Apr 2006

5340-66-031-9389
Spacing Threaded Standoff

660319389
ADE(W)67-1851: RNCC: 3 | RNVC: 2

4 Mar 1969

5340-66-153-5169
Handle Grip

661535169
5244581067: RNCC: 3 | RNVC: 2
5244581067: RNCC: 5 | RNVC: 2

1 Sep 2005

5340-66-122-5178
Support Hook

661225178
X50RC233A: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1
X50RC233A: RNCC: 5 | RNVC: 9

11 Oct 1984

5340-66-146-3904
Lever Arm

661463904
73193-3-46: RNCC: 3 | RNVC: 2

27 Apr 2000

5340-66-156-2488
Mounting Bracket

661562488
RPC-MGB-AB-00: RNCC: 3 | RNVC: 2

3 Oct 2007

5340-66-148-2655
Strap Fastener Loop

661482655
5340-056: RNCC: 3 | RNVC: 2
DEF(AUST)2010: RNCC: 4 | RNVC: 1

9 May 2002

5340-66-150-0237
Swivel Caster

661500237
NO PRIMARY REF 66-150-0237: RNCC: 3 | RNVC: 2
01068695: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-157-5490
General Purpose Resilient Mount

661575490
SA-6-MO-SET: RNCC: 3 | RNVC: 2

16 Dec 2008

5340-66-147-7454
Knee Strap

661477454
DU-013-A: RNCC: 3 | RNVC: 2
DU-013-A: RNCC: 5 | RNVC: 2

1 Aug 2001

5340-66-156-3524
Mounting Bracket

661563524
471-40007-409: RNCC: 3 | RNVC: 2
515681: RNCC: 5 | RNVC: 2

5 Nov 2007

5340-66-145-4518
Uut Retainers

661454518
608/2/57791/000: RNCC: 3 | RNVC: 2

20 Sep 1999

5340-66-151-8690
Multiple Angle Bracket

661518690
LTA-A04-0011-01: RNCC: 3 | RNVC: 2

31 Oct 2003

5340-66-128-5936
General Purpose Resilient Mount

661285936
110-032-082: RNCC: 3 | RNVC: 2
MYH3383: RNCC: 5 | RNVC: 2
2530-97-151-3220: RNCC: C | RNVC: 1
0068-00-000-3383: RNCC: C | RNVC: 1

15 Mar 1990

5340-66-146-3276
Silicone Rubb Strip

661463276
2386-49080-00: RNCC: 3 | RNVC: 2
2386-49080-00: RNCC: 5 | RNVC: 2

6 Apr 2000

5340-66-158-1568
Mounting Bracket

661581568
FLP-001: RNCC: 3 | RNVC: 2

7 Sep 2009

5340-66-151-4623
Turnbuckle Body

661514623
31-11-04-36404-201: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-66-159-8677
Butt Hinge

661598677
1098.02-P1: RNCC: 3 | RNVC: 2
1098.02: RNCC: 5 | RNVC: 1
QVRL109802P1: RNCC: 5 | RNVC: 2
1098.02: RNCC: 6 | RNVC: 9
1098.02-P1: RNCC: 6 | RNVC: 9

7 Mar 2012

5340-66-017-0218
Angle Bracket

660170218
151: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-123-8164
Elastic Strap

661238164
970-50MM BLACK: RNCC: 3 | RNVC: 2
970-50MM BLACK: RNCC: 5 | RNVC: 2

3 Feb 1999

5340-66-033-9090
Mending Plate

660339090
ADE(M)143-23: RNCC: 3 | RNVC: 2

30 Jan 1960

5340-66-160-4485
Padlock

661604485
PL321/20N: RNCC: 3 | RNVC: 2

30 Jul 2012

5340-66-153-2366
Padlock

661532366
TKC-50SG: RNCC: 3 | RNVC: 2
TKC-50SG: RNCC: 5 | RNVC: 2

27 Jun 2005

5340-66-143-3295
Guide

661433295
141852: RNCC: 3 | RNVC: 2

9 Apr 1998

5340-66-161-1170
Dust And Moisture Seal Protective Cover

661611170
AEWCISS-ADRD-000075: RNCC: 3 | RNVC: 2

18 Jun 2013

5340-66-142-8796
Electronic Equipment Hardware Kit

661428796
MPXU-HDD-KIT: RNCC: 3 | RNVC: 2

20 Mar 1997

5340-66-155-3670
Bridge Clamp

661553670
471-40217-150: RNCC: 3 | RNVC: 2
508682: RNCC: 5 | RNVC: 2

14 Mar 2007

5340-66-139-2056
Access Cover

661392056
402KB345: RNCC: 3 | RNVC: 2

27 May 1994

5340-66-158-3190
Padlock

661583190
L334B45/148/6KD: RNCC: 3 | RNVC: 2

9 Nov 2009

5340-66-156-6909
Manual Control Lever

661566909
471-90081-142: RNCC: 3 | RNVC: 2
471-90081-142: RNCC: 3 | RNVC: 2
525245: RNCC: 5 | RNVC: 2

27 Feb 2008

5340-66-153-2108
Mounting Bracket

661532108
LTE-A12-0015-01: RNCC: 3 | RNVC: 2

21 Jun 2005

5340-66-147-2920
Port King Post

661472920
MH-A186-0001-A2: RNCC: 3 | RNVC: 2

6 Feb 2001

5340-66-154-3268
Access Cover

661543268
471-RH000-009-T01: RNCC: 3 | RNVC: 2
471-RH000-009-T01: RNCC: 5 | RNVC: 2

26 Apr 2006

5340-66-144-8932
Webbing Strap

661448932
GYD692/1: RNCC: 3 | RNVC: 2
008-692-1: RNCC: 3 | RNVC: 2

23 Apr 1999

5340-66-156-2565
General Purpose Resilient Mount

661562565
15012244: RNCC: 3 | RNVC: 2

9 Oct 2007

5340-66-159-5943
Mounting Bracket

661595943
875988: RNCC: 3 | RNVC: 2

20 Oct 2011

5340-66-158-1688
Access Cover

661581688
BDI 30400-8-10: RNCC: 3 | RNVC: 2

11 Sep 2009

5340-66-147-6569
Webbing Strap

661476569
DT85049-G341/2: RNCC: 3 | RNVC: 2
FLSP-5000: RNCC: 3 | RNVC: 2
DT85049-G341/2: RNCC: 5 | RNVC: 2

30 Oct 2001

5340-66-063-9973
Reinforcement Plate

660639973
ADE(V)94-481: RNCC: 3 | RNVC: 2

18 Oct 1973

5340-66-102-9350
Handwheel

661029350
MAM6-21-14: RNCC: 3 | RNVC: 2
31038-1-14: RNCC: 3 | RNVC: 2

4 Nov 1979

5340-66-145-0048
Pipe Bracket

661450048
MH-A613-0001-C2: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-66-157-4187
Access Cover

661574187
471-51805-144: RNCC: 3 | RNVC: 2
525407: RNCC: 5 | RNVC: 2

14 Nov 2008

5340-66-158-7603
Access Cover

661587603
BMA-V08-0006: RNCC: 3 | RNVC: 2

28 Jul 2010

5340-66-144-5268
Mounting Bracket

661445268
A20914A-11/2: RNCC: 3 | RNVC: 2

4 Dec 1998

5340-66-151-0662
Mounting Plate

661510662
LTA-A02-228-001: RNCC: 3 | RNVC: 2
LTA-A02-133 ITEM 11: RNCC: 5 | RNVC: 2

29 Apr 2003

5340-66-154-1680
Coupling Bolt And N

661541680
S0D62A1E1820-305: RNCC: 3 | RNVC: 2

15 Mar 2006

5340-66-027-5525
Angle Bracket

660275525
ADE(W)55-20: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-060-4994
Dust And Moisture Seal Protective Cap

660604994
MEM0LCH415-1 1-2: RNCC: 3 | RNVC: 2

30 Aug 1973

5340-66-155-9126
Double Angle Bracket

661559126
471-50809-236: RNCC: 3 | RNVC: 2
502676: RNCC: 5 | RNVC: 2

27 Jun 2007

5340-66-160-2229
Mounting Bracket

661602229
BMA-A05-1558-01: RNCC: 3 | RNVC: 2

1 May 2012

5340-66-157-4624
Webbing Strap

661574624
468-B7-1100: RNCC: 3 | RNVC: 2

26 Nov 2008

5340-66-145-7864
Mounting Bracket

661457864
DDM-002: RNCC: 3 | RNVC: 2

10 Nov 1999

5340-66-150-0749
Expansion Shield

661500749
NO PRIMARY REF 66-150-0749: RNCC: 3 | RNVC: 2
08799313: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-140-6630
Belt-Strap Keeper

661406630
5340-66-106-0179: RNCC: 3 | RNVC: 2

6 Jul 1995

5340-66-145-4777
Desk Top Plate

661454777
608/2/57742/000: RNCC: 3 | RNVC: 2

24 Sep 1999

5340-66-123-5316
Hardwar Small Wheel

661235316
750-05.2800-1: RNCC: 3 | RNVC: 2

13 Feb 1998

5340-66-144-4930
Mortise Lock

661444930
230-111: RNCC: 3 | RNVC: 2

23 Nov 1998

5340-66-150-0625
Padlock

661500625
NO PRIMARY REF 66-150-0625: RNCC: 3 | RNVC: 2
03381392: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-125-3482
General Purpose Access Door

661253482
DE580160628: RNCC: 3 | RNVC: 2

3 Mar 1986

5340-66-155-3085
Mounting Bracket

661553085
508292: RNCC: 3 | RNVC: 2

26 Feb 2007

5340-66-108-9843
Access Cover

661089843
163P/0215/014 TYPE C: RNCC: 3 | RNVC: 1

18 Sep 1981

5340-66-147-9210
Nut And Bolt Head Protective Cap

661479210
SW36-2-G56: RNCC: 3 | RNVC: 2
SW36-2-G56: RNCC: 3 | RNVC: 2

19 Dec 2001

5340-66-157-1145
General Purpose Resilient Mount

661571145
LTA-A09-006-001: RNCC: 3 | RNVC: 2

30 Jul 2008

5340-66-018-8177
Double Angle Bracket

660188177
ADE(V)225-599: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-152-8960
Saddle

661528960
MLC-0223: RNCC: 3 | RNVC: 2

3 Jun 2005

5340-66-155-8137
Access Cover

661558137
471-50808-116: RNCC: 3 | RNVC: 2
502515: RNCC: 5 | RNVC: 2

6 Jun 2007

5340-66-156-0584
Rim Latch

661560584
M1-82: RNCC: 3 | RNVC: 2

14 Aug 2007

5340-66-156-0202
Angle Bracket

661560202
471-21226-115: RNCC: 3 | RNVC: 2
522503: RNCC: 5 | RNVC: 2

25 Jul 2007

5340-66-150-4009
Strapping Seal

661504009
NO PRIMARY REF 66-150-4009: RNCC: 3 | RNVC: 2
04248305: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-137-0804
Handle

661370804
6532C285-3: RNCC: 3 | RNVC: 2
0000-LL-BAQ-B868: RNCC: 6 | RNVC: 9

27 Aug 1992

5340-66-124-0751
Angle Bracket

661240751
HTLT307485-1205: RNCC: 3 | RNVC: 2

29 Mar 1985

5340-66-141-8649
Wheel Hood

661418649
481979500: RNCC: 3 | RNVC: 2
SFP008AP0055: RNCC: 3 | RNVC: 2

19 Jan 1996

5340-66-156-8816
Mounting Bracket

661568816
GTE00191: RNCC: 3 | RNVC: 2

20 May 2008

5340-66-123-2848
Bracket

661232848
X50RC338B: RNCC: 3 | RNVC: 2

14 Nov 1985

5340-66-123-4611
Hinge

661234611
33-76032-101: RNCC: 3 | RNVC: 2

13 Dec 1985

5340-66-155-5235
Manual Control Lever

661555235
471-30466-500: RNCC: 3 | RNVC: 2
501764: RNCC: 5 | RNVC: 2

10 Apr 2007

5340-66-150-0256
Swivel Caster

661500256
NO PRIMARY REF 66-150-0256: RNCC: 3 | RNVC: 2
05217610: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-049-7774
Butt Hinge

660497774
ADE(W)67-1454 ISSUE 2: RNCC: 3 | RNVC: 2

24 Nov 1972

5340-66-086-8083
Spacing Threaded Standoff

660868083
ADE(W)67-424 ISSUE 2: RNCC: 3 | RNVC: 2

20 Apr 1975

5340-66-156-7097
Sealing Plug Assembly

661567097
BMF-A30-0029: RNCC: 3 | RNVC: 2
BMF-A30-0029-01: RNCC: 3 | RNVC: 2

4 Mar 2008

5340-66-156-8048
Mounting Plate

661568048
DE102160002-2: RNCC: 3 | RNVC: 2

18 Apr 2008

5340-66-143-4438
Mounting Plate

661434438
492344: RNCC: 3 | RNVC: 2

6 May 1998

5340-66-065-9577
Retaining Clip

660659577
5167878: RNCC: 3 | RNVC: 2

10 Nov 1973

5340-66-155-7509
Angle Bracket

661557509
X50QL384: RNCC: 3 | RNVC: 2

21 May 2007

5340-66-146-5048
Snap Hook

661465048
PNP13: RNCC: 3 | RNVC: 2

2 Jun 2000

5340-66-105-6840
Strapping

661056840
LB17: RNCC: 3 | RNVC: 2
57712-2: RNCC: 5 | RNVC: 2

12 Feb 1981

5340-66-155-2421
G Mounting Socket

661552421
DI-0029-MI: RNCC: 3 | RNVC: 2

5 Feb 2007

5340-66-106-4032
Hand Crank

661064032
C0005-19: RNCC: 3 | RNVC: 2

14 Jul 1980

5340-66-151-3891
Dust And Moisture Seal Protective Cap

661513891
630A00041-000-03: RNCC: 3 | RNVC: 2

7 Feb 2005

5340-66-155-5613
Access Cover

661555613
471-30205-23: RNCC: 3 | RNVC: 2
507050: RNCC: 5 | RNVC: 2

16 Apr 2007

5340-66-027-2952
Dust And Moisture Seal Protective Cap

660272952
HU3-139: RNCC: 3 | RNVC: 2
PB3310-12: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-137-3691
Mounting Plate

661373691
113709-01: RNCC: 3 | RNVC: 2

5 Jan 1993

5340-66-158-3635
Mortise Latch

661583635
30V-06-0066-118: RNCC: 3 | RNVC: 2

26 Nov 2009

5340-66-156-3320
Loop Clamp

661563320
BMA-A05-1622-02: RNCC: 3 | RNVC: 2

31 Oct 2007

5340-66-142-9628
Retaining Strap

661429628
658/1/05765/000: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-66-159-3614
Flush Catch

661593614
M1-64-1: RNCC: 3 | RNVC: 2

16 Jun 2011

5340-66-160-2061
General Purpose Access Door

661602061
BMA-A05-1144-02: RNCC: 3 | RNVC: 2

24 Apr 2012

5340-66-151-0720
Multiple Angle Bracket

661510720
LTA-A05-259: RNCC: 3 | RNVC: 2
LTA-A05-259-001: RNCC: 3 | RNVC: 2

7 May 2003

5340-66-072-1773
Barrel Bolt

660721773
333B: RNCC: 3 | RNVC: 2

5 Jul 1974

5340-66-145-4327
Mounting Bracket

661454327
608/1/57991/000: RNCC: 3 | RNVC: 2

17 Sep 1999

5340-66-142-9627
Retaining Strap

661429627
658/1/05586/000: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-66-139-3755
Folding Cot Hinge

661393755
627-11-5: RNCC: 3 | RNVC: 2

15 Sep 1994

5340-66-151-0657
Key Holder

661510657
LTA13325: RNCC: 3 | RNVC: 2
LTA-A20-080 ITEM 10: RNCC: 5 | RNVC: 2

29 Apr 2003

5340-66-158-2110
Mounting Plate

661582110
ADE(M) 107-20: RNCC: 3 | RNVC: 2

29 Sep 2009

5340-66-159-4396
Mounting Bracket

661594396
998/2/93238/001: RNCC: 3 | RNVC: 2

14 Jul 2011

5340-66-145-1098
Mounting Bracket

661451098
TF00432: RNCC: 3 | RNVC: 1
TF00432-1: RNCC: 3 | RNVC: 2

3 Jun 2003

5340-66-147-8822
Clamp Strap

661478822
F/2888-575-001E: RNCC: 3 | RNVC: 2

27 Nov 2001

5340-66-151-6955
Angle Bracket

661516955
LTA-A07-0075: RNCC: 3 | RNVC: 2
LTA-A07-0075-01: RNCC: 3 | RNVC: 2

29 Aug 2003

5340-66-151-0714
Mounting Bracket

661510714
LTA-A09-011-001: RNCC: 3 | RNVC: 2
LTA-A09-011: RNCC: 5 | RNVC: 2

7 May 2003

5340-66-151-8162
Mounting Bracket

661518162
LTA-A02-230-001: RNCC: 3 | RNVC: 2

21 Oct 2003

5340-66-151-1658
Access Cover

661511658
LTA-A07-070: RNCC: 3 | RNVC: 1
LTA-A07-070-001: RNCC: 3 | RNVC: 2

26 Jun 2003

5340-66-074-5663
Swivel Caster

660745663
L565: RNCC: 3 | RNVC: 2

12 Feb 1971

5340-66-161-3343
Webbing Strap

661613343
ARK9184T: RNCC: 3 | RNVC: 2

11 Sep 2013

5340-66-160-7773
Mounting Plate

661607773
15015927: RNCC: 3 | RNVC: 2

5 Dec 2012

5340-66-093-6946
Access Cover

660936946
163P/0215/014 TYPE G: RNCC: 3 | RNVC: 2

26 May 1978

5340-66-137-6033
Dust And Moisture Seal Protective Plug

661376033
3A10-0391: RNCC: 3 | RNVC: 2

21 Nov 1992

5340-66-160-2892
Electronic Equipment Hardware Kit

661602892
640A00517-001-05: RNCC: 3 | RNVC: 2

29 May 2012

5340-66-152-7922
Mounting Bracket

661527922
BMMA 0601: RNCC: 3 | RNVC: 2

17 Mar 2005

5340-66-148-4206
Mounting Bracket

661484206
DSA-10-393: RNCC: 3 | RNVC: 2

11 Apr 2002

5340-66-150-8018
Box Plinth

661508018
UC 30-90/70: RNCC: 3 | RNVC: 2
UC 30-90/70: RNCC: 3 | RNVC: 2
UC 30-90/70: RNCC: 5 | RNVC: 2

27 Jun 2003

5340-66-032-5476
Handwheel

660325476
W1-125PC5: RNCC: 3 | RNVC: 2

2 Sep 1960

5340-66-155-5349
Multiple Angle Bracket

661555349
471-30007-202: RNCC: 3 | RNVC: 2
507801: RNCC: 5 | RNVC: 2

11 Apr 2007

5340-66-142-9817
Extension Drawer Slide

661429817
500/15DL: RNCC: 3 | RNVC: 2
999/4/42556/398: RNCC: 3 | RNVC: 2

16 May 1997

5340-66-159-0557
Webbing Strap

661590557
M287-601-03: RNCC: 3 | RNVC: 2
1850/40/03 ITM 7: RNCC: 3 | RNVC: 2

11 Jan 2011

5340-66-144-8942
Hinge

661448942
HYM1043: RNCC: 3 | RNVC: 2
0315-1011: RNCC: 5 | RNVC: 2

28 Apr 1999

5340-66-120-6750
Fwd. Hinge Half

661206750
12S1796-11-132: RNCC: 3 | RNVC: 2

13 Oct 1986

5340-66-160-8625
Mounting Bracket

661608625
P10473-03: RNCC: 3 | RNVC: 2

13 Feb 2013

5340-66-060-4524
Spacing Threaded Standoff

660604524
ADE(W)67-1851 ISSUE 3: RNCC: 3 | RNVC: 2

15 Jul 1975

5340-66-145-4794
Pocket

661454794
608/2/57868/000: RNCC: 3 | RNVC: 2

28 Sep 1999

5340-66-129-8582
Mounting Bracket

661298582
553.10.09.390: RNCC: 3 | RNVC: 2

3 Apr 2002

5340-66-160-7192
General Purpose Resilient Mount

661607192
P471-90200-101-T21: RNCC: 3 | RNVC: 2
1245612: RNCC: 5 | RNVC: 2

12 Nov 2012

5340-66-153-5976
Nut And Bolt Retainer

661535976
PLATE 90201-149-047: RNCC: 3 | RNVC: 2

23 Sep 2005

5340-66-149-0928
Mounting Plate

661490928
675A00008-001-01: RNCC: 3 | RNVC: 2

19 Nov 2002

5340-66-154-8844
Escutcheon Plate

661548844
8077-1055: RNCC: 3 | RNVC: 2

28 Sep 2006

5340-66-079-3845
Dust And Moisture Seal Protective Cap

660793845
AMR/SKY/16-1: RNCC: 3 | RNVC: 2

1 Sep 1974

5340-66-155-5419
Access Cover

661555419
DC91-1000-5-1: RNCC: 3 | RNVC: 2

12 Apr 2007

5340-66-026-2541
Bridge Clamp

660262541
ADE(V)5-34-4: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-146-6949
Fire Damper

661466949
MSD-MO-SB-280-200-250-SS: RNCC: 3 | RNVC: 2

9 Aug 2000

5340-66-085-1599
Expansion Plug

660851599
F11-638644: RNCC: 3 | RNVC: 2

16 Mar 1975

5340-66-147-3196
Alignment Shaft

661473196
752-2000-40: RNCC: 3 | RNVC: 2

8 Mar 2001

5340-66-148-2677
Bow Handle

661482677
LTA-A05-0317: RNCC: 3 | RNVC: 2
LTA-A05-0317-01: RNCC: 3 | RNVC: 2

16 May 2002

5340-66-152-5006
Dust And Moisture Seal Protective Cap

661525006
F1303-007520: RNCC: 3 | RNVC: 2

24 Feb 2005

5340-66-147-8646
Kit Mounting

661478646
981231: RNCC: 3 | RNVC: 2

10 Oct 2001

5340-66-142-5884
Mounting Bracket

661425884
5144440: RNCC: 3 | RNVC: 2
5144440: RNCC: 3 | RNVC: 2

21 Nov 1996

5340-66-150-8218
Angle Bracket

661508218
BDI 8213: RNCC: 3 | RNVC: 2
BDI 8213: RNCC: 3 | RNVC: 2

18 Aug 2003

5340-66-139-6162
Hand Arm Attachment

661396162
56W4-S116 PC 1: RNCC: 3 | RNVC: 1
56W4-S116 PC 1: RNCC: 3 | RNVC: 2

5 Jul 1994

5340-66-139-9681
General Purpose Resilient Mount

661399681
0043606: RNCC: 3 | RNVC: 1
03315 SH26: RNCC: 3 | RNVC: 1
03315 SH26: RNCC: 3 | RNVC: 1
100123/2P15/36SHORE/NR/ST37-2: RNCC: 3 | RNVC: 2
100123/2P15/36 SH: RNCC: 3 | RNVC: 2
100123/2P15/36SHORE/NR/ST37-2: RNCC: 3 | RNVC: 2

13 Oct 1994

5340-66-024-9801
Hinged Hasp

660249801
ADE(V)97-115-1: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-146-0860
Brace Bracket

661460860
438 0523-01: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-66-145-0268
Mounting Bracket

661450268
10714: RNCC: 3 | RNVC: 2
U04-343A: RNCC: 3 | RNVC: 2

19 May 1999

5340-66-160-1200
Retaining Strap

661601200
90-5412-01: RNCC: 3 | RNVC: 2

3 Apr 2012

5340-66-153-2306
Dust And Moisture Seal Protective Cover

661532306
CA93-81: RNCC: 3 | RNVC: 2
BM130033: RNCC: 5 | RNVC: 2

24 Jun 2005

5340-66-131-7325
Access Door Hinge

661317325
530.20.09.044: RNCC: 3 | RNVC: 2

2 May 1989

5340-66-147-2605
Bracket

661472605
DAS30A: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-66-027-6111
Mounting Bracket

660276111
HPM142W: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-156-7093
Mounting Plate

661567093
BMF-A05-1619-01: RNCC: 3 | RNVC: 2

4 Mar 2008

5340-66-152-6663
Kick Door Plate

661526663
016AMR391-3: RNCC: 3 | RNVC: 2
016AMR391-3: RNCC: 5 | RNVC: 1

18 Dec 2004

5340-66-158-2718
Mounting Bracket

661582718
MM&D 702150-1: RNCC: 3 | RNVC: 2

20 Oct 2009

5340-66-150-0745
Expansion Shield

661500745
NO PRIMARY REF 66-150-0745: RNCC: 3 | RNVC: 2
08798411: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-153-6699
Webbing Strap

661536699
9125D05042001-002: RNCC: 3 | RNVC: 2

11 Oct 2005

5340-66-154-6063
Side Plate

661546063
008-01955-001: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-66-150-0229
Swivel Caster

661500229
NO PRIMARY REF 66-150-0229: RNCC: 3 | RNVC: 2
04803203: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-128-5881
Clamping Catch

661285881
3-380-0004-9: RNCC: 3 | RNVC: 2

22 Jan 1990

5340-66-147-2613
Bracket

661472613
DAS598: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-66-091-0774
Screw Hook

660910774
HK40: RNCC: 3 | RNVC: 1
04411103: RNCC: 5 | RNVC: 2

7 May 1976

5340-66-147-2507
Splash Guard

661472507
60280: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-66-144-8015
Runner

661448015
35-27005-35: RNCC: 3 | RNVC: 2

2 Mar 1999

5340-66-154-6145
Runner

661546145
471-50806-119: RNCC: 3 | RNVC: 2
509428: RNCC: 5 | RNVC: 2

25 Jul 2006

5340-66-153-3058
Mechanical Stop

661533058
M100011-14: RNCC: 3 | RNVC: 2

8 Jul 2005

5340-66-146-9005
Bracket Rear

661469005
DCH-02: RNCC: 3 | RNVC: 2

27 Sep 2000

5340-66-114-0336
Helical Compression Spring Retainer

661140336
29000/486 SHEET 2: RNCC: 2 | RNVC: 2
AN170SA: RNCC: 5 | RNVC: 9

28 Mar 1982

5340-66-157-4861
Mounting Plate

661574861
V0507-CE-1227: RNCC: 3 | RNVC: 2

28 Nov 2008

5340-66-072-5010
Hinged Hasp

660725010
NO PRIMARY REF 66-072-5010: RNCC: 3 | RNVC: 2

5 Jul 1974

5340-66-150-0249
Swivel Caster

661500249
NO PRIMARY REF 66-150-0249: RNCC: 3 | RNVC: 2
04235955: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-156-0987
Lock Plate

661560987
471-90422-280: RNCC: 3 | RNVC: 2
521801: RNCC: 5 | RNVC: 2

24 Aug 2007

5340-66-158-2600
Mounting Plate

661582600
274-505-004: RNCC: 3 | RNVC: 2

15 Oct 2009

5340-66-038-5293
Buckle

660385293
ADE(M)183-43: RNCC: 3 | RNVC: 2

19 May 1971

5340-66-143-3550
Escutcheon Plate

661433550
1545-D-0117: RNCC: 3 | RNVC: 2

22 Apr 1998

5340-66-159-4111
Extension Drawer Slide

661594111
998/1/93228/001: RNCC: 3 | RNVC: 2

28 Jun 2011

5340-66-128-7759
Support Bracket Pan

661287759
2340-97-121-3094: RNCC: 3 | RNVC: 2
JAYBK826: RNCC: 5 | RNVC: 2

1 Oct 1993

5340-66-027-2275
Retaining Strap

660272275
261-1IN: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-144-1770
Electronic Equipment Hardware Kit

661441770
MT-F345: RNCC: 3 | RNVC: 2
SCES13608: RNCC: 3 | RNVC: 2

2 Jul 1998

5340-66-140-5824
Block Assembly

661405824
004-155-02: RNCC: 3 | RNVC: 2

26 Oct 1995

5340-66-151-9479
Access Cover

661519479
226921: RNCC: 3 | RNVC: 2

9 Apr 2004

5340-66-157-2757
Angle Bracket

661572757
11MK29402M: RNCC: 3 | RNVC: 2

23 Sep 2008

5340-66-142-9093
Locating Block

661429093
658/2/06461/000: RNCC: 3 | RNVC: 2

27 Feb 1997

5340-66-158-2292
Mounting Bracket

661582292
DF65-295-02: RNCC: 3 | RNVC: 2

6 Oct 2009

5340-66-154-8124
Mounting Plate

661548124
471-50806-133T01: RNCC: 3 | RNVC: 2
509443: RNCC: 5 | RNVC: 2

11 Sep 2006

5340-66-109-5211
Dust And Moisture Seal Boot

661095211
UAA-6870: RNCC: 3 | RNVC: 2
UAA-6870: RNCC: 3 | RNVC: 2

7 Jan 1987

5340-66-153-2611
Bow Handle

661532611
DE 100450007: RNCC: 3 | RNVC: 2

4 Jul 2005

5340-66-141-1341
General Purpose Resilient Mount

661411341
KAB80-4323E T60: RNCC: 3 | RNVC: 2

4 Oct 1995

5340-66-157-4643
Webbing Strap

661574643
468-C4-1450: RNCC: 3 | RNVC: 2

26 Nov 2008

5340-66-155-6925
Mechanical Stop

661556925
P10070-5: RNCC: 3 | RNVC: 2

10 May 2007

5340-66-118-6438
Retaining Strap

661186438
16582-883-300: RNCC: 3 | RNVC: 2

8 Sep 1984

5340-66-157-4486
Angle Bracket

661574486
V06-01-03-01-01: RNCC: 3 | RNVC: 2

25 Nov 2008

5340-66-158-4781
Mounting Plate

661584781
02121-020001: RNCC: 3 | RNVC: 2

11 Feb 2010

5340-66-082-6406
Webbing Strap

660826406
ADE(M)434-50: RNCC: 3 | RNVC: 2

7 Mar 1975

5340-66-147-6505
Platform Foot

661476505
2888-520-017E: RNCC: 3 | RNVC: 2
Q EDE 2888-570-017E: RNCC: 5 | RNVC: 2

23 Oct 2001

5340-66-152-1395
General Purpose Access Door

661521395
BMA-A05-0748: RNCC: 3 | RNVC: 2

13 Jul 2004

5340-66-150-2463
Hasp Staple

661502463
NO PRIMARY REF 66-150-2463: RNCC: 3 | RNVC: 2
04282002: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-123-2376
Tailgate Hinge

661232376
AA564-2A-2LH: RNCC: 3 | RNVC: 2
FADDTAA5642A2LH: RNCC: 3 | RNVC: 2

29 Oct 1985

5340-66-155-9565
Bumper

661559565
471-62810-127: RNCC: 3 | RNVC: 2
501406: RNCC: 5 | RNVC: 2

11 Jul 2007

5340-66-156-4685
Double Angle Bracket

661564685
15013977-01: RNCC: 3 | RNVC: 2

3 Dec 2007

Load More Results