What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is a Hasp Staple?

A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

Hardware, Commercial - Australia (AU)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Australia (AU) - NCB is 66

Page 27 of 29

NSN Format for Hardware, Commercial
Codified by Australia

53	40	66	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Australia (AU)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 53 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 78 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 109 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 25 Items
Holder,Spring 26 Items
What is a Compression Cup? 11 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 43 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 85 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 54 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 27 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 249 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 36 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 87 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 39 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 11 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 16 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 15 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Rim Latch? 18 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Rim Lock? 13 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 12 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 17 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 17 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 18 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 103 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 11 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 59 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 14 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 14 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Plug Button? 12 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Corrosion Preventive Anode? 27 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 78 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 268 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 88 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 70 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 36 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 40 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 41 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Plain Solid Disk? 41 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 12 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 608 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 57 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 54 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 317 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 48 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 40 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 83 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Quick Release Plunger? 17 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 65 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 24 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 14 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 22 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 49 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 19 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 151 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 15 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 444 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 128 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 42 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 53 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 25 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 201 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 33 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 133 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 42 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 54 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Strapping? 28 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 75 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Screw Thread Insert And Tool Assortment? 18 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 28 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 18 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 740 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 11 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 14 Items
What is an Antipilferage Seal? 27 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 129 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Seal Retaining Plate? 29 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 47 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1862 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 15 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 11 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 10 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 766 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 27 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 65 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 79 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 71 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 22 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 12 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 14 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 35 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 50 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 28 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 15 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 20 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 11 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 83 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 138 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 393 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 38 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 11 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 22 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
What is a Key Blank? 22 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 10 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 114 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 11 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 20 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 12 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is a Bumper? 74 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 27 of 29

5340-66-140-1035
Permanent Magnet

661401035
NO PRIMARY REF 66-140-1035: RNCC: 3 | RNVC: 2
U80101700: RNCC: 5 | RNVC: 2
U80101700: RNCC: 5 | RNVC: 2
DM45918-161: RNCC: 5 | RNVC: 9
2491 CM1: RNCC: 5 | RNVC: 9
ASC1260625: RNCC: 5 | RNVC: 9

14 Nov 1994

5340-66-155-9166
Lock Plate

661559166
471-50810-131: RNCC: 3 | RNVC: 2
506942: RNCC: 5 | RNVC: 2

28 Jun 2007

5340-66-155-5723
Mounting Plate

661555723
82CA18: RNCC: 3 | RNVC: 2

17 Apr 2007

5340-66-146-9545
Flameproo Enclosure

661469545
EJBA786: RNCC: 3 | RNVC: 2

18 Oct 2000

5340-66-144-8885
Handle Kit

661448885
904215: RNCC: 3 | RNVC: 2
904215: RNCC: 5 | RNVC: 2

21 Apr 1999

5340-66-159-0902
Dust And Moisture Seal Protective Cap

661590902
DX7129: RNCC: 3 | RNVC: 2
DX7129: RNCC: 3 | RNVC: 2

3 Feb 2011

5340-66-143-0989
Mortise Lock

661430989
531-000: RNCC: 3 | RNVC: 2

5 May 1997

5340-66-146-7021
Inner Panel

661467021
1410302: RNCC: 3 | RNVC: 2

15 Aug 2000

5340-66-090-7407
Butt Hinge

5340-66-090-7405
Angle Bracket

5340-66-151-7835
Mounting Bracket

661517835
AZ112: RNCC: 3 | RNVC: 2

27 Mar 2004

5340-66-146-1991
Mounting Plate

661461991
472 8044-01: RNCC: 3 | RNVC: 2

10 Feb 2000

5340-66-158-6811
Double Angle Bracket

661586811
RAY184031-1: RNCC: 3 | RNVC: 2
RAY184031-1: RNCC: 5 | RNVC: 2

3 Jun 2010

5340-66-150-8974
Dust And Moisture Seal Protective Cap

661508974
J-2/KG94A: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-66-153-2926
Latch Bar

661532926
DE 100450012: RNCC: 3 | RNVC: 2

6 Jul 2005

5340-66-144-8014
Runner

661448014
35-27005-34: RNCC: 3 | RNVC: 2

2 Mar 1999

5340-66-060-9276
Door Lock

660609276
370/12/CP: RNCC: 3 | RNVC: 2
PL7413: RNCC: 5 | RNVC: 2

22 Jul 1973

5340-66-153-2690
Mounting Bracket

661532690
A210 0311: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-069-4221

5340-66-147-8747
Bracket Assembly

661478747
F/2888-550-030A: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-030A: RNCC: 5 | RNVC: 2

21 Nov 2001

5340-66-082-9984
Rim Lock Set

660829984
20-02384559: RNCC: 3 | RNVC: 2
16-9001-5L: RNCC: 3 | RNVC: 2

24 Jan 1975

5340-66-157-8616
Bow Handle

661578616
BMA-A05-0447-01: RNCC: 3 | RNVC: 2

24 Apr 2009

5340-66-145-1146
Padlock Set

661451146
TDSHS37588: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-66-146-3946
Cushioning Pad

661463946
73273-3-48: RNCC: 3 | RNVC: 2

4 May 2000

5340-66-128-6570
Loop Clamp

661286570
604/2/13736: RNCC: 3 | RNVC: 2

21 May 1993

5340-66-158-3517
Loop Clamp

661583517
DF01-240-02: RNCC: 3 | RNVC: 2
12232.17.4: RNCC: 3 | RNVC: 2

23 Nov 2009

5340-66-140-6131
Webbing Strap

661406131
004-127-2: RNCC: 3 | RNVC: 2
ASR50-2.2: RNCC: 5 | RNVC: 2
BR50-1-2.2M: RNCC: 5 | RNVC: 2

27 Jul 1995

5340-66-102-4401
Hinged Hasp

5340-66-077-9357
Tee Hinge

660779357
HINGE: RNCC: 3 | RNVC: 1

18 Jul 1972

5340-66-140-4152
Handwheel

661404152
FE85088A-125S: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-66-154-9253
Elbow Catch

661549253
471-50807-185: RNCC: 3 | RNVC: 2
506087: RNCC: 5 | RNVC: 2

9 Oct 2006

5340-66-138-9755
Mounting Bracket

661389755
26F-27432-00-WL: RNCC: 3 | RNVC: 2

21 Dec 1993

5340-66-157-7973
Mounting Bracket

661577973
340: RNCC: 3 | RNVC: 2

30 Mar 2009

5340-66-145-0355
Dust And Moisture Seal Protective Cover

661450355
DE580730000: RNCC: 3 | RNVC: 2

25 May 1999

5340-66-128-7838
Mounting Plate

661287838
PLATE-380MMX55MM: RNCC: 3 | RNVC: 2

14 Sep 1993

5340-66-153-6487
Angle Bracket

661536487
4770411720-001: RNCC: 3 | RNVC: 2

6 Oct 2005

5340-66-119-3707
Track Stop

5340-66-125-2595
Double Angl Bracket

5340-66-125-3062
Retaining Strap

5340-66-149-5707

5340-66-021-4243
Expansion Shield

660214243
LOXIN 1-4 IN.: RNCC: 3 | RNVC: 2
12-84473: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-091-9288
S Threaded Standoff

5340-66-123-4553
Stop

661234553
33-31472-3: RNCC: 3 | RNVC: 2

13 Dec 1985

5340-66-147-8602
Control Panel

661478602
F/2888-550-043: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-043: RNCC: 5 | RNVC: 2

26 Sep 2001

5340-66-089-5010
Spring Tension Clip

660895010
ANC0-8696: RNCC: 3 | RNVC: 2

11 Aug 1975

5340-66-149-5779
Permanent Magnet

661495779
NO PRIMARY REF 66-149-5779: RNCC: 3 | RNVC: 2
QTTMB2200: RNCC: 5 | RNVC: 2

7 Apr 2003

5340-66-024-5108
Nonmetallic Bumper

660245108
203C01118: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-153-4794
Support

661534794
1013211067: RNCC: 3 | RNVC: 2
1013211067: RNCC: 5 | RNVC: 2

25 Aug 2005

5340-66-153-2609
Mounting Bracket

661532609
A210 0219: RNCC: 3 | RNVC: 2

4 Jul 2005

5340-66-147-7682
Hydrogen Sensor

661477682
61-0203/471: RNCC: 3 | RNVC: 2

4 Sep 2001

5340-66-154-1698
Coupling

661541698
S0E56A1E1816-301: RNCC: 3 | RNVC: 2

15 Mar 2006

5340-66-159-1945
Mounting Bracket

661591945
042404B-00: RNCC: 3 | RNVC: 2

29 Mar 2011

5340-66-142-6615
General Purpose Resilient Mount

661426615
DSA-6-553-9: RNCC: 3 | RNVC: 2

14 Jan 1997

5340-66-120-9464

5340-66-120-9462

5340-66-017-9810
Expansion Shield

5340-66-096-4974
Dust And Moist Boot

5340-66-120-9461

5340-66-097-8573
Angle Bracket

5340-66-122-4411
Spring Tension Clip

5340-66-037-4488
Locking Plate

660374488
5501-2PC6: RNCC: 3 | RNVC: 2

6 Nov 1970

5340-66-028-3057
Antipilferage Seal

660283057
66-28-3057: RNCC: 3 | RNVC: 9

1 Jan 1968

5340-66-158-4791
Mounting Plate

661584791
02121-020004: RNCC: 3 | RNVC: 2

12 Feb 2010

5340-66-160-3880
Access Cover

661603880
ID32-212: RNCC: 3 | RNVC: 2

4 Jul 2012

5340-66-128-4654
Bow Handle

661284654
YGA451L: RNCC: 3 | RNVC: 2

4 Jan 1988

5340-66-131-6575
Latch

661316575
640/2/28161: RNCC: 3 | RNVC: 2

23 Mar 1989

5340-66-077-9338
Door Hook

660779338
12-50077: RNCC: 3 | RNVC: 2

20 Oct 1974

5340-66-113-6639
Alumini Door Handle

661136639
10041: RNCC: 3 | RNVC: 2

28 Mar 1982

5340-66-148-3675
Automat Drain Valve

661483675
AD400-02-04: RNCC: 3 | RNVC: 2

15 Feb 2002

5340-66-145-1489
Runner

661451489
471-90420-101: RNCC: 3 | RNVC: 2
520050: RNCC: 3 | RNVC: 2
1498356: RNCC: 5 | RNVC: 2

27 Jul 1999

5340-66-157-4530
Webbing Strap

661574530
468-A7-700: RNCC: 3 | RNVC: 2

25 Nov 2008

5340-66-156-2937
Spacing Threaded Standoff

661562937
15006179: RNCC: 3 | RNVC: 2
15006179-01: RNCC: 3 | RNVC: 2

24 Oct 2007

5340-66-155-0261
Rod End Clevis

661550261
471-40216-109: RNCC: 3 | RNVC: 2
509169: RNCC: 5 | RNVC: 2

16 Nov 2006

5340-66-126-2857
General Purpose Resilient Mount

661262857
663-82317-00: RNCC: 3 | RNVC: 2
663-82317-00: RNCC: 3 | RNVC: 2

16 Jan 1991

5340-66-154-3960
Dust And Moisture Seal Protective Plug

661543960
915/9/05564: RNCC: 3 | RNVC: 2

15 May 2006

5340-66-149-9443
Retaining Strap

661499443
NO PRIMARY REF 66-149-9443: RNCC: 3 | RNVC: 2
02415957: RNCC: 5 | RNVC: 2

10 Apr 2003

5340-66-123-8503
Mounting Bracket

661238503
ARLM0118-001: RNCC: 3 | RNVC: 2

2 Nov 1998

5340-66-096-9004
Headless Straight Rod

660969004
A287-10: RNCC: 3 | RNVC: 2

7 May 1978

5340-66-098-1555
Anti-Corrosio Plate

660981555
MAM7-5-11: RNCC: 3 | RNVC: 2

10 Jun 1978

5340-66-142-9630
Multiple Angle Bracket

661429630
658/2/05684/000: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-66-147-7373
Mounting Plate

661477373
BT-0415X011-D: RNCC: 3 | RNVC: 2

27 Jul 2001

5340-66-131-6898
Dust Plug

661316898
CA93-103: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-66-155-8525
Double Angle Bracket

661558525
471-40204-154: RNCC: 3 | RNVC: 2
514990: RNCC: 5 | RNVC: 2

18 Jun 2007

5340-66-153-4156
Mounting Plate

661534156
15012808-02: RNCC: 3 | RNVC: 2

15 Aug 2005

5340-66-153-9561
Earth Bolt

661539561
AQ90-10-63.00/ITEM:10: RNCC: 3 | RNVC: 2

3 Jan 2006

5340-66-156-3520
Mounting Bracket

661563520
471-40007-474: RNCC: 3 | RNVC: 2
515690: RNCC: 5 | RNVC: 2

5 Nov 2007

5340-66-156-5203
Mounting Bracket

661565203
LAN-MD-D0058: RNCC: 3 | RNVC: 2

18 Dec 2007

5340-66-142-9165
Mounting Bracket

661429165
658/2/05992/001: RNCC: 3 | RNVC: 2

7 Mar 1997

5340-66-132-1868
Handwheel

661321868
3638-10 MOD 611: RNCC: 3 | RNVC: 2

24 Jul 1989

5340-66-150-0652
Padlock

661500652
NO PRIMARY REF 66-150-0652: RNCC: 3 | RNVC: 2
04073004: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-043-7173
Retaining Strap

5340-66-043-1133
Angle Bracket

5340-66-147-6163
Mounting Bracket

661476163
16241G103-10-4: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-66-139-3664
Mounting Bracket

661393664
704/2/11339: RNCC: 3 | RNVC: 2

5 Oct 1994

5340-66-159-4406
Blank Panel

661594406
998/2/93239/000: RNCC: 3 | RNVC: 2

14 Jul 2011

5340-66-146-3242
Dust And Moisture Seal Protective Cap Set

661463242
229 855N-01: RNCC: 3 | RNVC: 2
229 855N-01: RNCC: 5 | RNVC: 2

7 Apr 2000

5340-66-150-0744
Expansion Shield

661500744
NO PRIMARY REF 66-150-0744: RNCC: 3 | RNVC: 2
08798314: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-037-8573
Handwheel

660378573
STDP0302-093: RNCC: 3 | RNVC: 2

17 Apr 1971

5340-66-157-6770
Retaining Strap

661576770
SPECIAL-579: RNCC: 3 | RNVC: 2
D-2661: RNCC: 5 | RNVC: 2

9 Feb 2009

5340-66-161-3559
Block Clamp

661613559
Z230009: RNCC: 3 | RNVC: 2
Z230009-CLIP: RNCC: 5 | RNVC: 2

20 Sep 2013

5340-66-130-1250
Moderating Holder

661301250
S5E-F187: RNCC: 3 | RNVC: 2

25 Sep 1987

5340-66-148-3827
Foot Platform

661483827
F/2888-520-017E: RNCC: 3 | RNVC: 2
Q EDE F/2888-520-017E: RNCC: 5 | RNVC: 2

27 Feb 2002

5340-66-152-4876
Swivel Caster

661524876
WO990: RNCC: 3 | RNVC: 2
WO990: RNCC: 5 | RNVC: 2

16 Feb 2005

5340-66-161-1531
General Purpose Resilient Mount

661611531
M10760: RNCC: 3 | RNVC: 2

5 Jul 2013

5340-66-156-6641
Mounting Bracket

661566641
BMA-A05-1178: RNCC: 3 | RNVC: 2

22 Feb 2008

5340-66-142-9635
Lid Enclosure

661429635
658/2/06526/000: RNCC: 3 | RNVC: 2

1 Apr 1997

5340-66-156-2425
Corner Brace

661562425
A2100255-1-5: RNCC: 3 | RNVC: 2

1 Oct 2007

5340-66-158-7691
General Purpose Access Door

661587691
BMA-A05-1143-02: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-66-147-8581
Stowage Cabin Panel

661478581
F/2888-550-034E: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-034E: RNCC: 5 | RNVC: 2

25 Sep 2001

5340-66-142-9652
Angle Bracket

661429652
015004: RNCC: 3 | RNVC: 2
MT-F504: RNCC: 5 | RNVC: 2

14 Apr 1997

5340-66-126-2400
Manual Control Lever

661262400
6G5-41632-01-94: RNCC: 3 | RNVC: 2

7 Jan 1991

5340-66-132-0950
Handle Grip

661320950
OM0-142394-J: RNCC: 3 | RNVC: 2

12 Apr 1989

5340-66-155-0748
Mounting Bracket

661550748
ADF041-MC8175-309: RNCC: 3 | RNVC: 2

24 Nov 2006

5340-66-146-5434
Top Cold Plate

661465434
CX25-1M5-1: RNCC: 3 | RNVC: 2

7 Jul 2000

5340-66-154-8846
Mounting Plate

661548846
8077-1015: RNCC: 3 | RNVC: 2

28 Sep 2006

5340-66-087-6631
Tee Hinge

660876631
L634-18IN: RNCC: 3 | RNVC: 2

20 Apr 1975

5340-66-026-2542
Bridge Clamp

660262542
ADE(V)5-51: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-160-2329
Handle Grip

661602329
PT-952/1: RNCC: 3 | RNVC: 2
BM050156: RNCC: 5 | RNVC: 2

3 May 2012

5340-66-123-2369
Double Angle Bracket

661232369
AA564-2A-3: RNCC: 3 | RNVC: 2
FADDTAA5642A3: RNCC: 3 | RNVC: 2

29 Oct 1985

5340-66-126-2306
Rod End Connector

661262306
6R5-41237-00: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-66-148-8905
Pipe Hanger

661488905
5510/1A-PC3: RNCC: 3 | RNVC: 2

15 Nov 2002

5340-66-160-7556
Retaining Strap

661607556
047371A-00: RNCC: 3 | RNVC: 2

27 Nov 2012

5340-66-150-0380
Friction Catch

661500380
NO PRIMARY REF 66-150-0380: RNCC: 3 | RNVC: 2
04278605: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-147-8768
Wear Plate

661478768
F/2888-530-005B: RNCC: 3 | RNVC: 2
437 588 01 10: RNCC: 5 | RNVC: 1
Q EDE F/2888-530-005B: RNCC: 5 | RNVC: 2

22 Nov 2001

5340-66-144-6633
Mounting Bracket

661446633
QLICKSMART BRACKET: RNCC: 3 | RNVC: 2
QS-BR-1: RNCC: 3 | RNVC: 2

10 Mar 1999

5340-66-145-1097
Angle Bracket

661451097
TF00526: RNCC: 3 | RNVC: 1
TF00526-1: RNCC: 3 | RNVC: 2

4 Jun 2003

5340-66-150-0769
Expansion Shield

661500769
NO PRIMARY REF 66-150-0769: RNCC: 3 | RNVC: 2
01793905: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-128-4596
Loop Clamp

661284596
3-106-0020-4: RNCC: 3 | RNVC: 2
MYH3280: RNCC: 5 | RNVC: 2

23 Nov 1987

5340-66-157-5161
Access Cover

661575161
V0507-CE-1716: RNCC: 3 | RNVC: 2

8 Dec 2008

5340-66-155-8536
Double Angle Bracket

661558536
32MR1146: RNCC: 3 | RNVC: 2

18 Jun 2007

5340-66-082-6873
Spacing Threaded Standoff

660826873
ADE(W)67-1913 ISSUE 1: RNCC: 3 | RNVC: 2

14 May 1978

5340-66-156-8364
Access Cover

661568364
P05-CCVBRZ2500A: RNCC: 3 | RNVC: 2

2 May 2008

5340-66-139-1635
Electronic Equipment Hardware Kit

661391635
418/5/57428/000: RNCC: 3 | RNVC: 2
MX-F128: RNCC: 5 | RNVC: 2

16 Jun 1994

5340-66-135-6116
Mounting Plate

661356116
113.40.07.077: RNCC: 3 | RNVC: 2

14 Nov 1991

5340-66-157-2703
Mounting Bracket

661572703
10RE29458M: RNCC: 3 | RNVC: 2

22 Sep 2008

5340-66-146-9607
Mounting Plate

661469607
AC178: RNCC: 3 | RNVC: 2

24 Oct 2000

5340-66-148-4762
Mounting Bracket

661484762
DSA-10-388-3: RNCC: 3 | RNVC: 2

13 May 2002

5340-66-142-2134
Strap Fastener Loop

661422134
138100-16970-K-0001-25: RNCC: 3 | RNVC: 2
138100-16970-K-0002-25: RNCC: 3 | RNVC: 2

3 Apr 1996

5340-66-156-7105
Sealing Plug Assembly

661567105
BMF-A30-0032: RNCC: 3 | RNVC: 2
BMF-A30-0032-01: RNCC: 3 | RNVC: 2

4 Mar 2008

5340-66-139-5458
Monitor Mounti Tray

661395458
D001763/03-002: RNCC: 3 | RNVC: 2
RA-MS-001 AND RA-MS-002: RNCC: 3 | RNVC: 2
RA-MS-000: RNCC: 5 | RNVC: 2
D001763/03-002: RNCC: 5 | RNVC: 2

7 Jun 1994

5340-66-154-6631
Mounting Plate

661546631
275Z-0063: RNCC: 3 | RNVC: 1

8 Aug 2006

5340-66-133-7236
Angle Bracket

661337236
DE580190140: RNCC: 3 | RNVC: 2

2 Apr 1990

5340-66-139-0372
Camlock Cap

661390372
C634B: RNCC: 3 | RNVC: 2
FADWT634B: RNCC: 3 | RNVC: 2

31 Jan 1994

5340-66-149-7144
Permanent Magnet

661497144
NO PRIMARY REF 66-149-7144: RNCC: 3 | RNVC: 2
06954503: RNCC: 5 | RNVC: 2

10 Apr 2003

5340-66-156-5221
L Adaptor Assembly

661565221
15016848: RNCC: 3 | RNVC: 2

18 Dec 2007

5340-66-156-2524
Mounting Plate

661562524
A2100156-3: RNCC: 3 | RNVC: 2

4 Oct 2007

5340-66-159-5072
Angle Bracket

661595072
ARLM0961-1: RNCC: 3 | RNVC: 2

18 Aug 2011

5340-66-147-8653
Actuator

661478653
412224: RNCC: 3 | RNVC: 2

10 Oct 2001

5340-66-147-9129
Spring Tension Clip

661479129
60611Y002: RNCC: 3 | RNVC: 2

13 Dec 2001

5340-66-155-6172
Webbing Strap

661556172
BMA-A05-1671-01: RNCC: 3 | RNVC: 2

26 Apr 2007

5340-66-144-4704
Block Clamp

661444704
A00007-00430-D-0001: RNCC: 3 | RNVC: 2
A21861: RNCC: 3 | RNVC: 2

9 Nov 1998

5340-66-131-6482
Tube

661316482
604/2/13731: RNCC: 3 | RNVC: 2

23 Mar 1989

5340-66-145-4194
Hinge Assembly Kit

661454194
HIA100: RNCC: 3 | RNVC: 2

12 Aug 1999

5340-66-155-0457
Access Cover

661550457
471-90467-400T06: RNCC: 3 | RNVC: 2
501562: RNCC: 5 | RNVC: 2

22 Nov 2006

5340-66-158-6932
Runner

661586932
537 04 34-01: RNCC: 3 | RNVC: 2
537 04 34-01: RNCC: 5 | RNVC: 2

9 Jun 2010

5340-66-159-1958
Mounting Bracket

661591958
042514A-00: RNCC: 3 | RNVC: 2

29 Mar 2011

5340-66-155-4056
Loop Holder

661554056
203-01-61170: RNCC: 3 | RNVC: 2
203-01-61170: RNCC: 5 | RNVC: 2

22 Mar 2007

5340-66-155-4677
Access Cover

661554677
20Y-54-51952: RNCC: 3 | RNVC: 2
20Y-54-51952: RNCC: 5 | RNVC: 2

29 Mar 2007

5340-66-150-0658
Padlock

661500658
NO PRIMARY REF 66-150-0658: RNCC: 3 | RNVC: 2
03381052: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-160-1122
Mounting Plate

661601122
PN104129: RNCC: 3 | RNVC: 2

3 Apr 2012

5340-66-147-8795
Mounting Bracket

661478795
F/2888-550-025A: RNCC: 3 | RNVC: 2

23 Nov 2001

5340-66-159-4397
Angle Bracket

661594397
998/2/93229/000: RNCC: 3 | RNVC: 2

14 Jul 2011

5340-66-141-4978
General Purpose Resilient Mount

661414978
GB 248-KLT-1BU-X: RNCC: 3 | RNVC: 2

4 May 1996

5340-66-155-8425
Mounting Bracket

661558425
471-50809-118: RNCC: 3 | RNVC: 2
502552: RNCC: 5 | RNVC: 2

14 Jun 2007

5340-66-156-4970
Webbing Strap

661564970
10006014-020: RNCC: 3 | RNVC: 2
MS51926-3: RNCC: 5 | RNVC: 2

12 Dec 2007

5340-66-139-4457
Bag Hardware Kit

661394457
AA2714-18: RNCC: 3 | RNVC: 1

9 Jan 1995

5340-66-021-4240
Expansion Shield

660214240
LOXIN 1-2 IN: RNCC: 3 | RNVC: 2
12-84499: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-154-9203
Mounting Bracket

661549203
RPC-FMB-RW-001-OBL: RNCC: 3 | RNVC: 2

6 Oct 2006

5340-66-145-4675
Mounting Bracket

661454675
608/2/57517/003: RNCC: 3 | RNVC: 2

23 Sep 1999

5340-66-157-5636
Webbing Strap

661575636
X/C/0169/00: RNCC: 3 | RNVC: 2

18 Dec 2008

5340-66-147-8799
Mounting Bracket

661478799
F/2888-575-002A: RNCC: 3 | RNVC: 2

23 Nov 2001

5340-66-018-3388
Helical Compression Spring Seat

660183388
ADE(V)225-611: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-160-3722
Door Holder

661603722
R25-003-1: RNCC: 3 | RNVC: 2

26 Jun 2012

5340-66-139-3657
General Purpose Resilient Mount

661393657
999/4/38427/004: RNCC: 3 | RNVC: 2

29 Sep 1994

5340-66-146-3519
Sliding Base

661463519
240510A: RNCC: 3 | RNVC: 2

13 Apr 2000

5340-66-154-1683
Mounting Bracket

661541683
S0D62A1E1820-405: RNCC: 3 | RNVC: 2

15 Mar 2006

5340-66-122-0196
Dust And Moisture Seal Protective Plug

661220196
NQEA ITEM 80-54: RNCC: 3 | RNVC: 2
NQEA ITEM 81-54: RNCC: 5 | RNVC: 2

15 Jan 1985

5340-66-143-4435
Frame

661434435
492354-01: RNCC: 3 | RNVC: 2

6 May 1998

5340-66-036-6224
General Purpose Resilient Mount

660366224
GBC1010T4: RNCC: 3 | RNVC: 2
ADE(W)67-971-13: RNCC: 3 | RNVC: 2

4 Aug 1970

5340-66-158-1050
Access Cover

661581050
0703-0100: RNCC: 3 | RNVC: 2

19 Aug 2009

5340-66-155-1964
Padlock

661551964
234B45/138/5KD: RNCC: 3 | RNVC: 2

9 Jan 2007

5340-66-154-9230
Clamp Assembly

661549230
471-51805-3: RNCC: 3 | RNVC: 2
504304: RNCC: 5 | RNVC: 2

9 Oct 2006

5340-66-147-2127
Mounting Bracket

661472127
003/1001/GMOWS.1001.S1: RNCC: 3 | RNVC: 2

22 Nov 2000

5340-66-142-8434
Expansion Plug

661428434
363/30-2-3E-M16: RNCC: 3 | RNVC: 2

24 Feb 1997

5340-66-144-5251
Mounting Bracket

661445251
A209142-5K/1: RNCC: 3 | RNVC: 2

3 Dec 1998

5340-66-146-3272
Floating Device

661463272
2386-47800-00: RNCC: 3 | RNVC: 2
2386-47800-00: RNCC: 5 | RNVC: 2

6 Apr 2000

5340-66-157-7333
Spring Tension Clip

661577333
503 74 01-02: RNCC: 3 | RNVC: 2
503 74 01-02: RNCC: 5 | RNVC: 2

2 Mar 2009

5340-66-154-8365
Mounting Bracket

661548365
01-0952070: RNCC: 3 | RNVC: 2

14 Sep 2006

5340-66-148-6542
Access Cover

661486542
NALM00029: RNCC: 3 | RNVC: 2
NALM00029: RNCC: 5 | RNVC: 2

5 Dec 2002

5340-66-154-5600
Door Lock Kits

661545600
935220: RNCC: 3 | RNVC: 2
03R-935220: RNCC: 5 | RNVC: 2

6 Jul 2006

5340-66-128-5970
Buckle

661285970
SLL-25: RNCC: 3 | RNVC: 2

2 Oct 1990

5340-66-130-7245
Access Door Hinge

661307245
DSD0006/01 ITEM 4: RNCC: 3 | RNVC: 2

22 Apr 1988

5340-66-147-7417
Mounting Plate

661477417
OED-1749-9-08: RNCC: 3 | RNVC: 2

30 Jul 2001

5340-66-088-7041
Mounting Plate

660887041
ADE(W)67-1219ISSUE1: RNCC: 3 | RNVC: 2

14 Jun 1975

5340-66-159-1946
Mounting Bracket

661591946
042406B-00: RNCC: 3 | RNVC: 2

29 Mar 2011

5340-66-152-0122
General Purpose Resilient Mount

661520122
AR-0481X010-D: RNCC: 3 | RNVC: 1
E78-LD308-B: RNCC: 3 | RNVC: 2

27 Aug 2004

5340-66-142-9696
Angle Bracket

661429696
658/2/06470/002: RNCC: 3 | RNVC: 2

1 May 1997

5340-66-156-9037
Access Cover

661569037
510-16: RNCC: 3 | RNVC: 2

28 May 2008

5340-66-154-8005
Support

661548005
471-60801-162T01: RNCC: 3 | RNVC: 2
506737: RNCC: 5 | RNVC: 2

7 Sep 2006

5340-66-143-7277
Double Angle Bracket

661437277
658/2/06835/002: RNCC: 3 | RNVC: 2

4 Jul 1997

5340-66-156-2913
Loop Clamp

661562913
RSGU 1.22/15 W1: RNCC: 3 | RNVC: 2
10001179-22: RNCC: 5 | RNVC: 2

24 Oct 2007

5340-66-031-7992
Spacing Threaded Standoff

660317992
ADE(W)67-1242 ISSUE 1: RNCC: 3 | RNVC: 2

8 Apr 1969

5340-66-142-8226
Mounting Bracket

661428226
658/2/05249/000: RNCC: 3 | RNVC: 2

23 Jan 1997

5340-66-126-8181
Cover

661268181
10 353 238: RNCC: 3 | RNVC: 2

2 Jul 1986

5340-66-160-3464
Access Cover

661603464
63.31.224: RNCC: 3 | RNVC: 2
63.31.224: RNCC: 5 | RNVC: 2

21 Jun 2012

5340-66-158-8737
Loop Clamp

661588737
1373213: RNCC: 3 | RNVC: 2

16 Sep 2010

5340-66-147-6159
Tool Clip

661476159
740V: RNCC: 3 | RNVC: 2
Q EDE VHTC/740V: RNCC: 5 | RNVC: 2

19 Sep 2001

5340-66-147-8575
Stowage Cabin Panel

661478575
F/2888-550-034C: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-034C: RNCC: 5 | RNVC: 2

25 Sep 2001

5340-66-154-7367
Retaining Strap

661547367
15002195-03: RNCC: 3 | RNVC: 2

24 Aug 2006

5340-66-135-2488
Clamping Catch

661352488
RAH 3447-1: RNCC: 3 | RNVC: 2
P196: RNCC: 5 | RNVC: 2

13 Nov 1991

5340-66-158-8519
Mounting Bracket

661588519
532.10.09.026: RNCC: 3 | RNVC: 2

1 Sep 2010

5340-66-155-4825
Handle

661554825
60198: RNCC: 3 | RNVC: 2
60198: RNCC: 5 | RNVC: 2

30 Mar 2007

5340-66-155-4438
Dust And Moisture Seal Boot

661554438
20Y-43-22370: RNCC: 3 | RNVC: 2
20Y-43-22370: RNCC: 5 | RNVC: 2

27 Mar 2007

5340-66-143-0945
Metal Grille

661430945
ABY-MD-00032: RNCC: 3 | RNVC: 2

1 May 1997

5340-66-144-5406
Rope Hook

661445406
10616785: RNCC: 1 | RNVC: 2
HMO-K: RNCC: 3 | RNVC: 2
HMO: RNCC: 5 | RNVC: 2

1 Dec 1998

5340-66-158-2353
Mounting Plate

661582353
BMU-A05-3115-01: RNCC: 3 | RNVC: 2
BMU-A05-3115: RNCC: 5 | RNVC: 2
BMU-A05-3115-01: RNCC: 5 | RNVC: 2
BMU-A05-3115: RNCC: 5 | RNVC: 2

7 Oct 2009

5340-66-154-6374
General Purpose Resilient Mount

661546374
471-20201-1: RNCC: 3 | RNVC: 2
511811: RNCC: 5 | RNVC: 2

1 Aug 2006

5340-66-147-6275
Mounting Bracket

661476275
G1M: RNCC: 3 | RNVC: 2
BOTTLECHOCK G1M: RNCC: 3 | RNVC: 2
Q EDE BOTTLECHOCK G1M: RNCC: 5 | RNVC: 2
G1M: RNCC: 5 | RNVC: 2

10 Oct 2001

5340-66-148-5936
Angle Bracket

661485936
NALM00157: RNCC: 3 | RNVC: 2

9 Oct 2002

5340-66-160-0007
Webbing Strap

661600007
RANMME 2235-2: RNCC: 3 | RNVC: 2

20 Mar 2012

5340-66-132-2804
Mounting Bracket

661322804
016AMR292-2: RNCC: 3 | RNVC: 2

25 Sep 1989

5340-66-137-2825
Spring Tension Clip

661372825
0110158000000D0: RNCC: 3 | RNVC: 2

31 Oct 1992

5340-66-129-8338
Clip Retainer

661298338
300105: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-66-147-8617
Locking Handle

661478617
F/2888-550-029G: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-029G: RNCC: 5 | RNVC: 2

27 Sep 2001

5340-66-155-3736
Angle Bracket

661553736
471-41243-116: RNCC: 3 | RNVC: 2
512464: RNCC: 5 | RNVC: 2

14 Mar 2007

5340-66-158-5545
Mounting Plate

661585545
P10185-01: RNCC: 3 | RNVC: 2

24 Mar 2010

5340-66-150-0767
Expansion Shield

661500767
NO PRIMARY REF 66-150-0767: RNCC: 3 | RNVC: 2
01793701: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-157-6689
Air C Duct Assembly

661576689
HP/TAN/TI-SP:SS:CE(3M): RNCC: 3 | RNVC: 2
D-2701: RNCC: 3 | RNVC: 2

5 Feb 2009

5340-66-142-9092
Locating Block

661429092
658/2/06457/000: RNCC: 3 | RNVC: 2

27 Feb 1997

5340-66-146-3517
Strap

661463517
240507A-20: RNCC: 3 | RNVC: 2

12 Apr 2000

5340-66-150-0233
Swivel Caster

661500233
NO PRIMARY REF 66-150-0233: RNCC: 3 | RNVC: 2
04401058: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-064-4078
Spindle Bearing Kit

660644078
S5237-3CIRCLIPS5141-3BALL: RNCC: 3 | RNVC: 2

12 Feb 1974

5340-66-144-4803
Webbing Strap

661444803
11-240316A-20: RNCC: 3 | RNVC: 2

11 Nov 1998

5340-66-155-3984
Mounting Bracket

661553984
203-01-61181: RNCC: 3 | RNVC: 2
203-01-61181: RNCC: 5 | RNVC: 2

21 Mar 2007

5340-66-151-7012
Loop Clamp

661517012
LTA08069: RNCC: 3 | RNVC: 2

9 Sep 2003

5340-66-138-7146
Extension Drawer Slide

661387146
507870/073: RNCC: 3 | RNVC: 2
B/DD507870/073: RNCC: 3 | RNVC: 2
DD507870/073: RNCC: 3 | RNVC: 2

28 Mar 1994

5340-66-141-9704
Pad Eye

661419704
B8 0140102: RNCC: 3 | RNVC: 2

31 Jan 1996

5340-66-157-1300
Gas Outlet Casing

661571300
6100: RNCC: 3 | RNVC: 2

8 Aug 2008

5340-66-033-2651
Access Cover

5340-66-154-4336
Access Hole Frame

661544336
557.32.09.283: RNCC: 3 | RNVC: 2

24 May 2006

5340-66-142-6701
Mounting Bracket

661426701
DSA-10-389-12: RNCC: 3 | RNVC: 2
DSA-10-389-12: RNCC: 3 | RNVC: 2

20 Jan 1997

5340-66-147-8787
Mounting Bracket

661478787
F/2888-530-011E: RNCC: 3 | RNVC: 2

23 Nov 2001

5340-66-144-8011
Runner

661448011
35-27005-31: RNCC: 3 | RNVC: 2

2 Mar 1999

5340-66-150-0216
Rigid Caster

661500216
NO PRIMARY REF 66-150-0216: RNCC: 3 | RNVC: 2
05218017: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-154-6738
Mine Detect Armrest

661546738
3004-0015: RNCC: 3 | RNVC: 2

10 Aug 2006

5340-66-117-9514
Flange Solined

661179514
350A34-1029-20: RNCC: 3 | RNVC: 2

22 Jan 1985

5340-66-154-6781
Access Cover

661546781
VTR251-2TSUB14F4T19-7IIINM40W3P-: RNCC: 3 | RNVC: 1

11 Aug 2006

5340-66-090-1173
Corner Brace

660901173
AR15-006-2: RNCC: 3 | RNVC: 2

9 Sep 1975

5340-66-142-9662
Angle Bracket

661429662
658/2/06817/003: RNCC: 3 | RNVC: 2

14 Apr 1997

5340-66-155-8369
Mounting Bracket

661558369
471-20026-119: RNCC: 3 | RNVC: 2
523299: RNCC: 5 | RNVC: 2

13 Jun 2007

5340-66-160-9438
Vent Plug

661609438
AGF2386: RNCC: 3 | RNVC: 2

18 Mar 2013

5340-66-157-4237
Dust And Moisture Seal Protective Cap

661574237
CP5: RNCC: 3 | RNVC: 2
15017478: RNCC: 5 | RNVC: 2

18 Nov 2008

5340-66-155-6398
Manual Control Handle

661556398
471-30208-105: RNCC: 3 | RNVC: 2
521197: RNCC: 5 | RNVC: 2

1 May 2007

5340-66-146-9007
Bracket Rear

661469007
FHB-02: RNCC: 3 | RNVC: 2

27 Sep 2000

5340-66-094-5327
Loop Clamp

660945327
1B3-50-24: RNCC: 3 | RNVC: 2

17 Apr 1977

5340-66-155-2278
Mounting Bracket

661552278
471-20065-112: RNCC: 3 | RNVC: 2
521389: RNCC: 5 | RNVC: 2

29 Jan 2007

5340-66-154-7180
Door Lock Kit-Inter

661547180
940033: RNCC: 3 | RNVC: 1
06L-940033: RNCC: 5 | RNVC: 2

21 Aug 2006

5340-66-037-4483
Nut And Bolt Locking Plate

660374483
5501-2PC30: RNCC: 3 | RNVC: 2
A3-82-A-17: RNCC: 3 | RNVC: 2

25 Jun 1971

5340-66-139-5392
Outboard Motor Cap

661395392
196630-11110: RNCC: 3 | RNVC: 2

27 May 1994

5340-66-152-3769
Mounting Plate

661523769
DE251920013: RNCC: 3 | RNVC: 2

13 Oct 2004

5340-66-127-3992
Turnbuckle

661273992
RF223: RNCC: 3 | RNVC: 2

29 Jun 1999

5340-66-158-1555
Dust And Moisture Seal Protective Plug

661581555
9098600190: RNCC: 3 | RNVC: 2

7 Sep 2009

5340-66-125-4358
Dust And Moisture Seal Protective Cap

661254358
175-3217: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

18 Apr 1986

5340-66-150-0489
Door Closer

661500489
NO PRIMARY REF 66-150-0489: RNCC: 3 | RNVC: 2
04339308: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-152-1740
Access Cover

661521740
DF26-119-1: RNCC: 3 | RNVC: 2

13 Aug 2004

5340-66-154-2676
Access Cover

661542676
S000A1E1836-701: RNCC: 3 | RNVC: 2

10 Apr 2006

5340-66-143-8288
Helical Compression Spring Seat

661438288
1/2INMK50N-316SS-15/60PSI-1S: RNCC: 3 | RNVC: 2
1/2INMK50N-316SS-15/60PSI-1S: RNCC: 5 | RNVC: 2

8 Oct 1997

5340-66-143-6127
Buckle

661436127
12/MC-0-1139-50: RNCC: 3 | RNVC: 2
RANTME 4283 ITEM 3: RNCC: 5 | RNVC: 2

24 Sep 1997

5340-66-152-0264
General Purpose Resilient Mount

661520264
BMA-A08-0194-01: RNCC: 3 | RNVC: 2

18 Sep 2004

5340-66-144-8688
Plate D1

661448688
8492 391-002: RNCC: 3 | RNVC: 2

14 Apr 1999

5340-66-160-1334
Mounting Bracket

661601334
90-5911-01: RNCC: 3 | RNVC: 2

5 Apr 2012

5340-66-150-3943
Butt Hinge

661503943
NO PRIMARY REF 66-150-3943: RNCC: 3 | RNVC: 2
00109312: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-153-9566
Casing

661539566
M0228FM-MR90-05.00 / ITEM: 2: RNCC: 3 | RNVC: 2

3 Jan 2006

5340-66-141-5959
I Bracket Assembly

661415959
608/1/47912: RNCC: 3 | RNVC: 2

30 Aug 1996

5340-66-144-6055
Webbing Strap

661446055
AS/NZS 4380:1996: RNCC: 3 | RNVC: 1
11-240503B-150: RNCC: 3 | RNVC: 2
11-240503B-150: RNCC: 3 | RNVC: 2

15 Dec 1998

5340-66-160-3187
General Purpose Resilient Mount

661603187
P471-90200-101T34: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-66-120-2112
Access Cover

661202112
29000/900-5: RNCC: 2 | RNVC: 2
29000/900-5: RNCC: 3 | RNVC: 2

6 Mar 1984

5340-66-144-1654
Cradl Locking Lever

661441654
6460042/16-MOD1: RNCC: 3 | RNVC: 2

22 Jun 1998

5340-66-131-5804
Vinyl Lace

661315804
3252380R1: RNCC: 3 | RNVC: 2

11 Jan 1989

5340-66-155-0754
Access Door Hinge

661550754
ADF041-MC8177-012: RNCC: 3 | RNVC: 2

24 Nov 2006

5340-66-150-1582
Dust And Moisture Seal Protective Cap

661501582
NO PRIMARY REF 66-150-1582: RNCC: 3 | RNVC: 2
01922856: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-146-3153
Rig Strap Assembly

661463153
2318-48560-00: RNCC: 3 | RNVC: 2
2318-48560-00: RNCC: 5 | RNVC: 2

4 Apr 2000

5340-66-034-2578
Handwheel

660342578
SAV101-16: RNCC: 3 | RNVC: 2

27 Apr 1960

5340-66-150-1404
Earplugs Laser-Lite

661501404
NO PRIMARY REF 66-150-1404: RNCC: 3 | RNVC: 2
01079966: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-158-2234
Mounting Bracket

661582234
K11477-251: RNCC: 3 | RNVC: 2

2 Oct 2009

5340-66-140-6747
Electronic Equipment Hardware Kit

661406747
418/5/52582/000: RNCC: 3 | RNVC: 2
MX-F239: RNCC: 5 | RNVC: 2

8 Mar 1996

5340-66-142-9116
General Purpose Access Door

661429116
658/2/06499/000: RNCC: 3 | RNVC: 2

19 Mar 1997

5340-66-145-8076
Connecting Plate

661458076
43/780: RNCC: 3 | RNVC: 2
D/43/780: RNCC: 3 | RNVC: 2

10 Nov 1999

5340-66-043-9699
Catch Strike

660439699
ADE(W)67-156 ISSUE 2: RNCC: 3 | RNVC: 2

1 Sep 1972

5340-66-035-2639
Panel Access Stay

660352639
2C5612: RNCC: 3 | RNVC: 2

7 Dec 1970

5340-66-154-7586
Extension Drawer Slide

661547586
BMD-H05-0003-01: RNCC: 3 | RNVC: 2

30 Aug 2006

5340-66-146-1955
Mounting Bracket

661461955
472 7353-03: RNCC: 3 | RNVC: 2

10 Feb 2000

5340-66-130-7161
Loop Drive Vane

661307161
65-13-155: RNCC: 3 | RNVC: 2

21 Apr 1988

5340-66-156-1024
Access Cover

661561024
RP245818/B/29: RNCC: 3 | RNVC: 2
RP245818/B/29: RNCC: 5 | RNVC: 2

27 Aug 2007

5340-66-164-8077

5340-66-150-5806
Access Door Hinge

661505806
NO PRIMARY REF 66-150-5806: RNCC: 3 | RNVC: 2
00108614: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-150-2866
Loop Clamp

661502866
NO PRIMARY REF 66-150-2866: RNCC: 3 | RNVC: 2
02251055: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-130-5257
Butt Hinge

661305257
C5-15-5389: RNCC: 3 | RNVC: 2

26 Aug 1988

5340-66-148-2803
Retaining Strap

661482803
LTA-A11-003-001: RNCC: 3 | RNVC: 2

30 May 2002

5340-66-140-4181
Helical Compression Spring Seat

661404181
FE1300-100105: RNCC: 3 | RNVC: 2

29 Mar 1995

5340-66-147-7562
Rail Sprin Retainer

661477562
6671251-1: RNCC: 3 | RNVC: 2
6671251-1: RNCC: C | RNVC: 1

8 Aug 2001

5340-66-141-6113
Wear Strip

661416113
008-017: RNCC: 3 | RNVC: 2
008-017: RNCC: 3 | RNVC: 2

25 Sep 1996

5340-66-141-2171
Door Handle

661412171
88.5905.0251: RNCC: 3 | RNVC: 2

1 Nov 1995

5340-66-143-7341
Dust And Moisture Seal Protective Cap

661437341
CAP 300: RNCC: 3 | RNVC: 2

4 Jul 1997

5340-66-143-3089
Fork Unit Rbs 70

661433089
612 312 592: RNCC: 3 | RNVC: 2
6 423 481: RNCC: 5 | RNVC: 2

1 Apr 1998

5340-66-160-3998
Mounting Bracket

661603998
AS2599115: RNCC: 3 | RNVC: 2
AS2599115: RNCC: 5 | RNVC: 2

11 Jul 2012

5340-66-153-4065
Mounting Bracket

661534065
15013071-02: RNCC: 3 | RNVC: 2

11 Aug 2005

5340-66-150-2033
Support Hook

661502033
NO PRIMARY REF 66-150-2033: RNCC: 3 | RNVC: 2
03084418: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-156-5578
Track Stop

661565578
BMA-A07-0090: RNCC: 3 | RNVC: 2
BMA-A07-0090-01: RNCC: 3 | RNVC: 2

16 Jan 2008

5340-66-154-5647
Mounting Plate

661545647
008-02174-001: RNCC: 3 | RNVC: 2

6 Jul 2006

5340-66-154-8008
Support

661548008
471-60801-162T02: RNCC: 3 | RNVC: 2
506738: RNCC: 5 | RNVC: 2

7 Sep 2006

5340-66-018-6174
Luggage Catch

660186174
ADE(V)225-544: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-128-8488
Retaining Strap

661288488
AYG9737: RNCC: 3 | RNVC: 2
0068-00-000-9737: RNCC: C | RNVC: 1

1 Dec 1993

5340-66-155-7052
Spring Holder

661557052
471-90007-108: RNCC: 3 | RNVC: 2
507715: RNCC: 5 | RNVC: 2

14 May 2007

5340-66-158-2005
Spring Tension Clip

661582005
8400: RNCC: 3 | RNVC: 2

24 Sep 2009

5340-66-109-3059
Angle Bracket

661093059
H2503: RNCC: 3 | RNVC: 2
999/4/42556/246: RNCC: 3 | RNVC: 2

8 Sep 1983

5340-66-154-7611
Access Cover

661547611
471-90552-504: RNCC: 3 | RNVC: 2
524226: RNCC: 5 | RNVC: 2

30 Aug 2006

5340-66-161-2878
Manual Control Handle

661612878
15019615: RNCC: 1 | RNVC: 2
02-232: RNCC: 3 | RNVC: 2

21 Aug 2013

5340-66-151-6300
Manual Control Handle

661516300
NO PRIMARY REF 66-151-6300: RNCC: 3 | RNVC: 2
EO11532Y: RNCC: 5 | RNVC: 2

29 Aug 2003

5340-66-155-5272
Access Cover

661555272
471-30208-202: RNCC: 3 | RNVC: 2
509139: RNCC: 5 | RNVC: 2

11 Apr 2007

5340-66-149-8387
Coat And Hat Hook

661498387
NO PRIMARY REF 66-149-8387: RNCC: 3 | RNVC: 2
00763668: RNCC: 5 | RNVC: 2

9 Apr 2003

5340-66-157-4488
Mounting Bracket

661574488
V01-00-00F19-05: RNCC: 3 | RNVC: 2

25 Nov 2008

5340-66-151-8776
Loop Clamp

661518776
27103/5: RNCC: 3 | RNVC: 2
03829156: RNCC: 5 | RNVC: 2

12 Jan 2004

5340-66-142-9799
Mounting Bracket

661429799
MT-F506: RNCC: 3 | RNVC: 2
015032: RNCC: 3 | RNVC: 2

9 May 1997

5340-66-164-8052

5340-66-155-9185
Block Clamp

661559185
471-50810-151: RNCC: 3 | RNVC: 2
506962: RNCC: 5 | RNVC: 2

28 Jun 2007

5340-66-137-2777
Mounting Bracket

661372777
TF 027400: RNCC: 3 | RNVC: 2

28 Oct 1992

5340-66-154-8197
Buckle

661548197
FL008: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-66-146-9153
Weather Shield

661469153
ZS-150: RNCC: 3 | RNVC: 2

4 Oct 2000

5340-66-155-9715
Angle Bracket

661559715
AG-A0405: RNCC: 3 | RNVC: 2

17 Jul 2007

5340-66-160-7820
Access Cover

661607820
045250A-00: RNCC: 3 | RNVC: 2

6 Dec 2012

5340-66-159-3966
Access Cover

661593966
P05-CCBRZ2500A: RNCC: 3 | RNVC: 2

22 Jun 2011

5340-66-150-4035
Strapping

661504035
NO PRIMARY REF 66-150-4035: RNCC: 3 | RNVC: 2
05665819: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-157-4534
Webbing Strap

661574534
468-A9-1200: RNCC: 3 | RNVC: 2

25 Nov 2008

5340-66-147-7350
Clamping Catch

661477350
SCE-DC-001: RNCC: 3 | RNVC: 2

26 Jul 2001

5340-66-134-4296
Control Hand Plate

661344296
704-48229-10: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-66-138-9378
Cover

661389378
87434-14011-03: RNCC: 3 | RNVC: 2
2530-97-151-3273: RNCC: C | RNVC: 1

2 Nov 1993

5340-66-146-9099
Mounting Bracket

661469099
ZG-101: RNCC: 3 | RNVC: 2

4 Oct 2000

5340-66-156-4805
General Purpose Resilient Mount

661564805
10003789-09: RNCC: 3 | RNVC: 2
0132 0720: RNCC: 5 | RNVC: 2

6 Dec 2007

5340-66-146-2027
Access Cover

661462027
472 8348-02: RNCC: 3 | RNVC: 2

11 Feb 2000

5340-66-114-6947
Blank Panel

5340-66-159-2612
Dust And Moisture Seal Protective Cap

661592612
DXPPH400: RNCC: 3 | RNVC: 2
PPH400: RNCC: 3 | RNVC: 2
PPH400: RNCC: 3 | RNVC: 2

9 May 2011

5340-66-148-4766
Adaptor

661484766
OED 1657-1: RNCC: 3 | RNVC: 2

13 May 2002

5340-66-158-7475
Mounting Plate

661587475
P10470-90: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-66-140-4183
Helical Compression Spring Seat

661404183
FE1302-100012: RNCC: 3 | RNVC: 2

29 Mar 1995

5340-66-154-7492
Access Cover

661547492
VTR251-2TSUB14F4T19.7IIINM40W3P-: RNCC: 3 | RNVC: 1

29 Aug 2006

5340-66-150-1588
Dust And Moisture Seal Protective Cap

661501588
NO PRIMARY REF 66-150-1588: RNCC: 3 | RNVC: 2
08616810: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-142-9624
Track Stop

661429624
658/2/06544/000: RNCC: 3 | RNVC: 2

26 Mar 1997

5340-66-130-7604
Toggle Assembly Doo

661307604
01DSD0006-01 ITEM 10: RNCC: 3 | RNVC: 2
02DML0002-153 ITEM 10: RNCC: 5 | RNVC: 2

11 May 1988

5340-66-154-8162
Mounting Bracket

661548162
471-50806-101T02: RNCC: 3 | RNVC: 2
509408: RNCC: 5 | RNVC: 2

12 Sep 2006

5340-66-150-5142
Latch Bar

661505142
NO PRIMARY REF 66-150-5142: RNCC: 3 | RNVC: 2
04055705: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-154-8016
Support

661548016
471-60801-114: RNCC: 3 | RNVC: 2
506684: RNCC: 5 | RNVC: 2

7 Sep 2006

5340-66-158-7688
General Purpose Access Door

661587688
BMA-A05-1686-01: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-66-155-1119
Dust And Moisture Seal Protective Cap

661551119
BP3306-48: RNCC: 3 | RNVC: 2

6 Dec 2006

5340-66-020-7787
Dust And Moisture Seal Protective Plug

660207787
H15637A: RNCC: 3 | RNVC: 2
H15637A: RNCC: 5 | RNVC: 9

1 Jan 1968

5340-66-153-9624
Manual Control Lever

661539624
M0228FH-MV40-07.00 / ITEM:5: RNCC: 3 | RNVC: 2

4 Jan 2006

5340-66-126-5589
Permanent Magnet

661265589
2164760400: RNCC: 3 | RNVC: 2

14 May 1991

5340-66-158-4100
Angle Bracket

661584100
K12700-402: RNCC: 3 | RNVC: 2

22 Dec 2009

5340-66-152-1366
Mounting Bracket

661521366
BMA-H10-0032-01: RNCC: 3 | RNVC: 2
BMA-H10-0032-01: RNCC: 5 | RNVC: 2

8 Jul 2004

5340-66-156-5298
Access Cover

661565298
CRA-A19-3018-01: RNCC: 3 | RNVC: 2

19 Dec 2007

5340-66-160-7831
Access Cover

661607831
MAKB14/ITEM:03: RNCC: 3 | RNVC: 2

7 Dec 2012

5340-66-153-6474
Angle Bracket

661536474
47421317605-101: RNCC: 3 | RNVC: 2

6 Oct 2005

5340-66-154-8803
Mounting Bracket

661548803
15008460-01: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-66-158-5480
Mounting Bracket

661585480
9060-1143: RNCC: 3 | RNVC: 2
9060-1143: RNCC: 5 | RNVC: 2

19 Mar 2010

5340-66-155-6000
Mounting Plate

661556000
471-30624-101: RNCC: 3 | RNVC: 2
523537: RNCC: 5 | RNVC: 2

23 Apr 2007

5340-66-155-4141
Retaining Clip

661554141
07285-00180: RNCC: 3 | RNVC: 2
07285-00180: RNCC: 5 | RNVC: 2

23 Mar 2007

5340-66-025-2733
Angle Bracket

660252733
ADE(M)37-21: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-144-4968
General Purpose Resilient Mount

661444968
FBP180: RNCC: 3 | RNVC: 2

24 Nov 1998

5340-66-146-5288
Cabin Gatelock

661465288
N500-562-17: RNCC: 3 | RNVC: 2

28 Jun 2000

5340-66-060-0578
Turnbuckle

660600578
AL549-7-8INGALV: RNCC: 3 | RNVC: 2
04699802: RNCC: 5 | RNVC: 2

14 May 1973

5340-66-145-7860
Mounting Bracket

661457860
697/1/00992/002: RNCC: 3 | RNVC: 2

8 Nov 1999

5340-66-151-8131
General Purpose Resilient Mount

661518131
LTA08107: RNCC: 3 | RNVC: 2

8 Oct 2003

5340-66-164-7827

5340-66-164-7828

5340-66-164-8083

5340-66-155-8606
Manual Control Handle

661558606
471-50834-106: RNCC: 3 | RNVC: 2
510254: RNCC: 5 | RNVC: 2

18 Jun 2007

5340-66-146-6003
Dust And Moisture Seal Protective Cap

661466003
DF01-250-15: RNCC: 3 | RNVC: 2
QDP-04: RNCC: 5 | RNVC: 2

8 Jun 2000

5340-66-158-0252
Mortise Latch Set

661580252
7FD8000A43G04: RNCC: 3 | RNVC: 2

23 Jun 2009

5340-66-147-2601
Transfer Pipe

661472601
DAR251S: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-66-144-6175
Webbing Strap

661446175
11-240503B-220: RNCC: 3 | RNVC: 2

13 Jan 1999

5340-66-148-7821
Filter Chair Mesh

661487821
BE6100: RNCC: 3 | RNVC: 2

26 Jul 2002

5340-66-138-9598
Cover

661389598
4257500154: RNCC: 3 | RNVC: 2
0064-25-750-0154: RNCC: C | RNVC: 1

12 Nov 1993

5340-66-152-4204
Retaining Clip

661524204
34-1529: RNCC: 3 | RNVC: 2
34-1529: RNCC: 5 | RNVC: 1

19 Nov 2004

5340-66-146-0886
Flush Door Ring

661460886
438 4130-01: RNCC: 3 | RNVC: 2

13 Jan 2000

5340-66-160-3711
Flange Protector

661603711
R-29-003-8.9: RNCC: 3 | RNVC: 2

26 Jun 2012

5340-66-144-4695
Webbing Strap

661444695
AS/NZS 4380:1996: RNCC: 3 | RNVC: 1
11-240503B-200: RNCC: 3 | RNVC: 2

11 Nov 1998

5340-66-094-1319
Access Cover

660941319
800128-69: RNCC: 3 | RNVC: 2

5 Aug 1983

5340-66-147-6190
Mounting Plate

661476190
AWES10-06: RNCC: 3 | RNVC: 2

20 Sep 2001

5340-66-155-4101
General Purpose Access Door

661554101
471-41214-902: RNCC: 3 | RNVC: 2
511367: RNCC: 5 | RNVC: 2

23 Mar 2007

5340-66-150-0660
Padlock

661500660
NO PRIMARY REF 66-150-0660: RNCC: 3 | RNVC: 2
03384605: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-152-3280
Buckle

661523280
F1474-2-2: RNCC: 3 | RNVC: 2

28 Aug 2004

5340-66-036-2905
Compressor Isolator

660362905
6502-01-763: RNCC: 3 | RNVC: 2

30 Jun 1970

5340-66-124-3492
Lock

661243492
VL21: RNCC: 3 | RNVC: 2
4L197-40-12: RNCC: 3 | RNVC: 2

31 May 1985

5340-66-054-1164
Mounting Plate

5340-66-041-4592
Rod End Connector

5340-66-134-9037
Electronic Equipment Hardware Kit

661349037
418-5-52570-000: RNCC: 3 | RNVC: 2
MX-F310: RNCC: 5 | RNVC: 2

12 Oct 1990

5340-66-143-3346
Mounting Bracket

661433346
141930: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-66-148-6790
Swivel Caster

661486790
FE-10466: RNCC: 3 | RNVC: 2

13 Jan 2003

5340-66-160-7764
Mounting Bracket

661607764
61141047-003: RNCC: 3 | RNVC: 2
61141047-003: RNCC: 5 | RNVC: 2

5 Dec 2012

5340-66-147-8689
Roller Assembly

661478689
2888-570-009B: RNCC: 3 | RNVC: 2
Q EDE 2888-570-009B: RNCC: 5 | RNVC: 2

15 Oct 2001

5340-66-153-7923
Extension Handle

661537923
SPL010-A1: RNCC: 3 | RNVC: 2

3 Nov 2005

5340-66-037-1998
Retaining Strap

660371998
ADE(V)57-15: RNCC: 3 | RNVC: 2

16 Sep 1970

5340-66-151-1523
Loop Clamp

661511523
04990862: RNCC: 3 | RNVC: 2
LTA23011: RNCC: 5 | RNVC: 2

24 Jun 2003

5340-66-158-4485
Webbing Strap

661584485
00-240503A-220: RNCC: 3 | RNVC: 2

25 Jan 2010

5340-66-160-7548
Mounting Plate

661607548
G02-21005: RNCC: 3 | RNVC: 2

27 Nov 2012

5340-66-157-3589
Antipilferage Seal Locking Wire

661573589
471-20241-7: RNCC: 3 | RNVC: 2
1607480: RNCC: 5 | RNVC: 2

21 Oct 2008

5340-66-031-7996
Spacing Threaded Standoff

660317996
ADE(W)67-1298-1 ISSUE 2: RNCC: 3 | RNVC: 2

8 Apr 1969

5340-66-122-5700
Rod End Clevis

661225700
SMC Y-02: RNCC: 3 | RNVC: 2

18 Oct 1984

5340-66-160-8886
Mounting Bracket

661608886
P10002-20-9-1: RNCC: 3 | RNVC: 2

25 Feb 2013

5340-66-028-0607
Hinged Hasp

660280607
ADE(V)98-49: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-160-2477
Access Cover

661602477
BMA-A05-533-001: RNCC: 3 | RNVC: 2

8 May 2012

5340-66-151-8144
Mounting Bracket

661518144
LTA-A03-0134-01: RNCC: 3 | RNVC: 2

13 Oct 2003

5340-66-155-3947
Mounting Bracket

661553947
P10048-1: RNCC: 3 | RNVC: 2

21 Mar 2007

5340-66-155-5185
Access Cover

661555185
P10070-6: RNCC: 3 | RNVC: 2

4 Apr 2007

5340-66-158-0125
Mounting Bracket

661580125
15014985: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-66-132-3440
Mounting Bracket

661323440
201AMR120: RNCC: 3 | RNVC: 2

15 Nov 1989

5340-66-145-1100
Mounting Bracket

661451100
TF00433: RNCC: 3 | RNVC: 1
TF00433-1: RNCC: 3 | RNVC: 2

5 Jun 2003

5340-66-100-0201
Nonmetallic Bumper

661000201
M171: RNCC: 3 | RNVC: 2

22 Dec 1978

5340-66-151-8723
Access Cover

661518723
LTE-A16-0006-01: RNCC: 3 | RNVC: 2

19 Nov 2003

5340-66-153-5959
Cover Seal

661535959
PLATE 90205-95-170: RNCC: 3 | RNVC: 2

23 Sep 2005

5340-66-155-4189
Webbing Strap

661554189
BME-H05-0015-01: RNCC: 3 | RNVC: 2

23 Mar 2007

5340-66-038-4183
Castable Refra Twig

5340-66-038-2982
Access Cover

5340-66-155-4437
Dust And Moisture Seal Boot

661554437
20Y-43-22261: RNCC: 3 | RNVC: 2
20Y-43-22261: RNCC: 5 | RNVC: 2

27 Mar 2007

5340-66-159-1343
Clamping Catch

661591343
LBC 02-10: RNCC: 3 | RNVC: 2

4 Mar 2011

5340-66-146-9359
Oil Ser Bladder Kit

661469359
5430A00: RNCC: 3 | RNVC: 2
AC1007: RNCC: 3 | RNVC: 2

11 Oct 2000

5340-66-159-5769
Snap Hook

661595769
9503319: RNCC: 3 | RNVC: 2
9503319: RNCC: 5 | RNVC: 2

7 Oct 2011

5340-66-154-9124
Bridge Clamp

661549124
471-90532-104: RNCC: 3 | RNVC: 2
520170: RNCC: 5 | RNVC: 2

5 Oct 2006

5340-66-146-6945
Fire Damper

661466945
MSD-MO-SB-570-220-250-SS: RNCC: 3 | RNVC: 2

9 Aug 2000

5340-66-148-6791
Caster Jack Wheel

661486791
FE-10466-001: RNCC: 3 | RNVC: 2

13 Jan 2003

5340-66-157-4712
Rim Latch

661574712
C5-11-35-3: RNCC: 3 | RNVC: 2

26 Nov 2008

5340-66-159-2853
Corrosion Preventive Anode

661592853
CDZ4-1.00: RNCC: 3 | RNVC: 2

20 May 2011

5340-66-155-9856
Mounting Plate

661559856
AG-A0416: RNCC: 3 | RNVC: 2

19 Jul 2007

5340-66-146-3265
Clamp

661463265
2386-46840-00: RNCC: 3 | RNVC: 2
2386-46840-00: RNCC: 5 | RNVC: 2

6 Apr 2000

5340-66-154-8529
Blank Panel

661548529
15010478-13: RNCC: 3 | RNVC: 2

19 Sep 2006

5340-66-150-0375
Barrel Bolt

661500375
NO PRIMARY REF 66-150-0375: RNCC: 3 | RNVC: 2
04048301: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-157-5865
Dust And Moisture Seal Protective Plug

661575865
PN-001372: RNCC: 3 | RNVC: 2

16 Jan 2009

5340-66-126-7328
General Purpose Resilient Mount

661267328
195-03-22401: RNCC: 3 | RNVC: 2

9 May 1986

5340-66-152-4158
General Purpose Resilient Mount

661524158
F20-1-1: RNCC: 3 | RNVC: 2
F20-1-1: RNCC: 5 | RNVC: 2

16 Nov 2004

5340-66-157-7986
Access Cover

661577986
20163-1: RNCC: 3 | RNVC: 2

30 Mar 2009

5340-66-126-0819
Strap Hinge

661260819
460-15: RNCC: 3 | RNVC: 2

14 Sep 1990

5340-66-130-1491
Webbing Strap

661301491
STRAP/NYLON41CM: RNCC: 3 | RNVC: 2

9 Oct 1987

5340-66-050-7804
Support Bracket

660507804
C4P1315-2: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

18 May 1972

5340-66-032-1946
Dust And Moisture Seal Protective Plug

660321946
5-105: RNCC: 3 | RNVC: 2

18 Apr 1969

5340-66-154-9021
Mounting Assembly

661549021
471-20027: RNCC: 3 | RNVC: 2
512317: RNCC: 5 | RNVC: 2

4 Oct 2006

5340-66-151-9669
Dust And Moisture Seal Protective Cap

661519669
MH-M521-001-01: RNCC: 3 | RNVC: 2

15 May 2004

5340-66-150-0211
Rigid Caster

661500211
NO PRIMARY REF 66-150-0211: RNCC: 3 | RNVC: 2
01024458: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-155-8791
Runner

661558791
471-50824-101: RNCC: 3 | RNVC: 2
509583: RNCC: 5 | RNVC: 2

22 Jun 2007

5340-66-109-2919
Swivel Caster

661092919
DA68247000-65: RNCC: 3 | RNVC: 2
DA68247000-65: RNCC: 3 | RNVC: 2

11 Nov 1986

5340-66-109-3002
General Purpose Access Door

661093002
606-2677-201: RNCC: 3 | RNVC: 2

7 Aug 1981

5340-66-155-5653
Angle Bracket

661555653
471-30205-304: RNCC: 3 | RNVC: 2
507054: RNCC: 5 | RNVC: 2

16 Apr 2007

5340-66-142-3236
Manual Control Handle

661423236
10501-005SGY: RNCC: 3 | RNVC: 2

30 May 1996

5340-66-149-2978
Permanent Magnet

661492978
NO PRIMARY REF 66-149-2978: RNCC: 3 | RNVC: 2
86627623: RNCC: 5 | RNVC: 2

25 Mar 2003

5340-66-150-0677
Padlock

661500677
NO PRIMARY REF 66-150-0677: RNCC: 3 | RNVC: 2
00989458: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-158-6176
General Purpose Resilient Mount

661586176
471-90200-126T02: RNCC: 3 | RNVC: 2
1119515: RNCC: 3 | RNVC: 2

20 Apr 2010

5340-66-155-6037
Clip

661556037
04CA76: RNCC: 3 | RNVC: 2

24 Apr 2007

5340-66-139-8627
Vent Plug

661398627
A12568-47.01: RNCC: 3 | RNVC: 2

1 Sep 1994

5340-66-140-5053
Clampband

661405053
1532: RNCC: 3 | RNVC: 2

5 Oct 1994

5340-66-149-0010
Dust And Moisture Seal Protective Cap

661490010
A53-997-B2180-0G00: RNCC: 3 | RNVC: 2

4 Sep 2002

5340-66-142-9687
Butt Hinge

661429687
658/2/06552/000: RNCC: 3 | RNVC: 2

29 Apr 1997

5340-66-148-8907
Pipe Hanger

661488907
5510/1A-PC4: RNCC: 3 | RNVC: 2

15 Nov 2002

5340-66-151-4329
Loop Clamp

661514329
EBU-0010: RNCC: 3 | RNVC: 2

8 Dec 2003

5340-66-106-0174
Buckle

5340-66-147-5405
Webbing Strap

661475405
YT25: RNCC: 3 | RNVC: 2
004-853-01: RNCC: 3 | RNVC: 2

27 Jun 2001

5340-66-147-6142
General Purpose Resilient Mount

661476142
LTA10039: RNCC: 3 | RNVC: 2
LTA10039/S: RNCC: 3 | RNVC: 2
M539-190-60: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-66-151-0957
Double Angle Bracket

661510957
LTA-A20-056: RNCC: 3 | RNVC: 2
LTA-A20-056-001: RNCC: 3 | RNVC: 2

13 May 2003

5340-66-151-0963
Rod End Clevis

661510963
LTA-A03-091-001: RNCC: 3 | RNVC: 2
LTA-A03-091: RNCC: 3 | RNVC: 2

13 May 2003

5340-66-153-3566
Mounting Bracket

661533566
LTE-A12-0020-01: RNCC: 3 | RNVC: 2

25 Jul 2005

5340-66-151-0601
Mounting Plate

661510601
LTA-A05-218-001: RNCC: 3 | RNVC: 2

23 Apr 2003

5340-66-154-8019
Pin

661548019
471-60801-117: RNCC: 3 | RNVC: 2
506687: RNCC: 5 | RNVC: 2

7 Sep 2006

5340-66-146-5049
Snatch Block

661465049
AS 2089-1993: RNCC: 3 | RNVC: 1
6720: RNCC: 3 | RNVC: 2

2 Jun 2000

5340-66-157-4442
Retaining Strap

661574442
V02-01-07-02-05: RNCC: 3 | RNVC: 2

25 Nov 2008

5340-66-157-3865
Headless Straight Rod

661573865
AG-A0319: RNCC: 3 | RNVC: 2

31 Oct 2008

5340-66-159-5674
Mounting Bracket

661595674
2 825 864: RNCC: 3 | RNVC: 2

28 Sep 2011

5340-66-159-2246
Key Holder

661592246
CIC-A-36--009: RNCC: 3 | RNVC: 2
TPK9K: RNCC: 5 | RNVC: 9

12 Apr 2011

5340-66-150-3933
Butt Hinge

661503933
NO PRIMARY REF 66-150-3933: RNCC: 3 | RNVC: 2
05125463: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-151-1029
Angle Bracket

661511029
LTA-A05-219: RNCC: 3 | RNVC: 2
LTA-A05-219-001: RNCC: 3 | RNVC: 2

22 May 2003

5340-66-151-1682
Access Cover

661511682
LTB-A05-009-001: RNCC: 3 | RNVC: 2
LTB-A05-009: RNCC: 5 | RNVC: 2

1 Jul 2003

5340-66-154-6281
Access Cover

661546281
471-51631-202: RNCC: 3 | RNVC: 2
524541: RNCC: 5 | RNVC: 2

31 Jul 2006

5340-66-155-4759
Dust And Moisture Seal Boot

661554759
196630-05280: RNCC: 3 | RNVC: 2

30 Mar 2007

5340-66-032-0797
Access Cover

660320797
ADE(W)67-1689ISSUE3: RNCC: 3 | RNVC: 2

29 Apr 1969

5340-66-060-8152
Dust And Moisture Seal Protective Cap-Plug

660608152
5CP: RNCC: 3 | RNVC: 2

7 Mar 1975

5340-66-156-0928
Mounting Plate

661560928
90170-TPL77-B12: RNCC: 3 | RNVC: 2
90170: RNCC: 3 | RNVC: 2

23 Aug 2007

5340-66-161-0964
Sliding Door Hanger

661610964
434019D: RNCC: 3 | RNVC: 2

4 Jun 2013

5340-66-028-8466
Synchro Clamp

660288466
237P00297: RNCC: 3 | RNVC: 2

16 Oct 1968

5340-66-153-6787
Mounting Plate

661536787
DE251510000: RNCC: 3 | RNVC: 2
DE251510000: RNCC: 5 | RNVC: 2

12 Oct 2005

5340-66-025-5312
Spring Tension Clip

660255312
SNB1265A: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-142-4524
Mortise Lock

661424524
5840-AP173283: RNCC: 3 | RNVC: 2
5340-AP173283: RNCC: 3 | RNVC: 2

2 Aug 1996

5340-66-160-4351
Pad Eye

661604351
BMA-A19-0144-01: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-66-155-0654
Mounting Bracket

661550654
471-40205-159: RNCC: 3 | RNVC: 2
515252: RNCC: 5 | RNVC: 2

23 Nov 2006

5340-66-150-4027
Strapping

661504027
NO PRIMARY REF 66-150-4027: RNCC: 3 | RNVC: 2
00669254: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-160-6546
Mounting Bracket

661606546
ID25-277: RNCC: 3 | RNVC: 2

3 Oct 2012

5340-66-156-7334
General Purpose Resilient Mount

661567334
AC500PL 37: RNCC: 3 | RNVC: 2
SVT-SC-90257: RNCC: 3 | RNVC: 2

11 Mar 2008

5340-66-150-4011
Strapping Seal

661504011
NO PRIMARY REF 66-150-4011: RNCC: 3 | RNVC: 2
01686300: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-151-8960
Blank Panel

661518960
01-2350034: RNCC: 3 | RNVC: 2
20-0952022 ITEM 50: RNCC: 5 | RNVC: 2

11 Mar 2004

5340-66-158-3353
Mount Assembly

661583353
DE253350007: RNCC: 3 | RNVC: 2

17 Nov 2009

5340-66-146-1536
Pipe Support

661461536
537162 02: RNCC: 3 | RNVC: 2

1 Feb 2000

5340-66-151-3636
Dust And Moisture Seal Protective Plug

661513636
NALM00159-1: RNCC: 3 | RNVC: 2

3 Nov 2004

5340-66-150-8869
Strapping

661508869
BANSTRAP-3-R: RNCC: 3 | RNVC: 2

5 Sep 2003

5340-66-143-3789
Locating Pin

661433789
PGM-E-4-14: RNCC: 3 | RNVC: 2

21 Apr 1998

Load More Results