What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is a Hasp Staple?

A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

Hardware, Commercial - Australia (AU)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Australia (AU) - NCB is 66

Page 26 of 29

NSN Format for Hardware, Commercial
Codified by Australia

53	40	66	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Australia (AU)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 53 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 78 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 109 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 25 Items
Holder,Spring 26 Items
What is a Compression Cup? 11 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 43 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 85 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 54 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 27 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 249 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 36 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 87 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 39 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 11 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 16 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 15 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Rim Latch? 18 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Rim Lock? 13 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 12 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 17 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 17 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 18 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 103 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 11 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 59 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 14 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 14 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Plug Button? 12 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Corrosion Preventive Anode? 27 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 78 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 268 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 88 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 70 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 36 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 40 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 41 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Plain Solid Disk? 41 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 12 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 608 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 57 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 54 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 317 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 48 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 40 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 83 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Quick Release Plunger? 17 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 65 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 24 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 14 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 22 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 49 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 19 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 151 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 15 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 444 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 128 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 42 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 53 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 25 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 201 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 33 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 133 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 42 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 54 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Strapping? 28 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 75 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Screw Thread Insert And Tool Assortment? 18 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 28 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 18 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 740 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 11 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 14 Items
What is an Antipilferage Seal? 27 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 129 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Seal Retaining Plate? 29 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 47 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1862 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 15 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 11 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 10 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 766 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 27 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 65 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 79 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 71 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 22 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 12 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 14 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 35 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 50 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 28 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 15 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 20 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 11 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 83 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 138 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 393 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 38 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 11 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 22 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
What is a Key Blank? 22 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 10 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 114 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 11 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 20 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 12 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is a Bumper? 74 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 26 of 29

5340-66-142-6306
Adjustable Foot

661426306
166066: RNCC: 3 | RNVC: 2

10 Dec 1996

5340-66-131-4577
General Purpose Resilient Mount

661314577
470031C2: RNCC: 3 | RNVC: 2

5 Nov 1988

5340-66-143-3287
Seat Vent

661433287
322127: RNCC: 3 | RNVC: 2

9 Apr 1998

5340-66-127-6622
Plain Solid Disk

661276622
STDP-4814-017 ITEM 3: RNCC: 3 | RNVC: 2

17 Nov 1986

5340-66-146-1948
Mounting Bracket

661461948
472 7311-01: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-66-147-6139
Fel-Ride Height Stop

661476139
LTA-A20-034-001: RNCC: 3 | RNVC: 2
LTA-A20-034-001/S: RNCC: 3 | RNVC: 2

18 Sep 2001

5340-66-157-3075
Dust And Moisture Seal Protective Cap

661573075
CCANZDFTBSCAP: RNCC: 3 | RNVC: 2

3 Oct 2008

5340-66-143-3977
Hinge Plate

661433977
492148: RNCC: 3 | RNVC: 2

23 Apr 1998

5340-66-103-7275
Bolt And Spacer Kit

661037275
TSK0011-12: RNCC: 3 | RNVC: 2

8 May 1970

5340-66-156-5539
Manual Control Handle

661565539
ARLM0935-1: RNCC: 3 | RNVC: 2

15 Jan 2008

5340-66-010-1453
Toggle Lever Catch

660101453
421: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-155-6003
Mounting Plate

661556003
183749: RNCC: 3 | RNVC: 2

23 Apr 2007

5340-66-149-7146
Permanent Magnet

661497146
NO PRIMARY REF 66-149-7146: RNCC: 3 | RNVC: 2
04454855: RNCC: 5 | RNVC: 2

10 Apr 2003

5340-66-155-8571
Mounting Plate

661558571
471-51805-121: RNCC: 3 | RNVC: 2
504281: RNCC: 5 | RNVC: 2

18 Jun 2007

5340-66-149-1109
Webbing Strap

661491109
8305-041: RNCC: 3 | RNVC: 2

11 Dec 2002

5340-66-146-0890
Locking Unit

661460890
438 4150-01: RNCC: 3 | RNVC: 2

13 Jan 2000

5340-66-149-1844
Retaining Clip

661491844
70273Y108-E DOUBLE KEEPER: RNCC: 3 | RNVC: 2
70273Y108-E ITEM 10: RNCC: 5 | RNVC: 1

6 Feb 2003

5340-66-074-5030
Dust And Moisture Seal Protective Cap

660745030
AMR/AVEL/9-1: RNCC: 3 | RNVC: 2

4 Feb 1971

5340-66-150-2023
Support Hook

661502023
NO PRIMARY REF 66-150-2023: RNCC: 3 | RNVC: 2
04067803: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-122-7180
Mounting Bracket

661227180
X50MB396M: RNCC: 3 | RNVC: 2
X50MB340: RNCC: 5 | RNVC: 2

18 Oct 1984

5340-66-146-3513
Strap

661463513
00-240503A-40: RNCC: 3 | RNVC: 2

12 Apr 2000

5340-66-157-7408
Snap Hook

661577408
RF6511 / NAVY: RNCC: 3 | RNVC: 2

4 Mar 2009

5340-66-154-9454
Bumper

661549454
1 221 757: RNCC: 3 | RNVC: 2

17 Oct 2006

5340-66-154-9458
Bumper

661549458
1 217 469: RNCC: 3 | RNVC: 2

17 Oct 2006

5340-66-150-7314
Manual Control Lever

661507314
0000427/4: RNCC: 3 | RNVC: 2

1 May 2003

5340-66-150-7854
Multiple Angle Bracket

661507854
LTA-A04-005: RNCC: 3 | RNVC: 2

4 Apr 2003

5340-66-151-0607
Access Cover

661510607
LTE-A05-0018: RNCC: 3 | RNVC: 2
LTE-A05-0018-01: RNCC: 5 | RNVC: 2

24 Apr 2003

5340-66-151-0721
T Bracket

661510721
LTA-A05-302: RNCC: 3 | RNVC: 2
LTA-A05-302-001: RNCC: 3 | RNVC: 2

7 May 2003

5340-66-151-1408
General Purpose Access Door

661511408
LTA-A02-025-001: RNCC: 3 | RNVC: 2
LTA-A02-025: RNCC: 5 | RNVC: 2

23 Jun 2003

5340-66-155-1723
Mounting Bracket

661551723
LM17: RNCC: 3 | RNVC: 2

20 Dec 2006

5340-66-102-8214
Circuit Break Catch

661028214
28902C5305-28: RNCC: 3 | RNVC: 2

27 Sep 1979

5340-66-150-0235
Swivel Caster

661500235
NO PRIMARY REF 66-150-0235: RNCC: 3 | RNVC: 2
00058684: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-150-3944
Butt Hinge

661503944
NO PRIMARY REF 66-150-3944: RNCC: 3 | RNVC: 2
04089807: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-141-0132
General Purpose Resilient Mount

661410132
331911: RNCC: 3 | RNVC: 2
331914: RNCC: 3 | RNVC: 2
H63-146-95-125-8FF: RNCC: 3 | RNVC: 2
SM10007: RNCC: 3 | RNVC: 2

10 Aug 1995

5340-66-154-6309
Access Cover

661546309
6-160-3003: RNCC: 3 | RNVC: 2
6-160-3003: RNCC: 5 | RNVC: 2

31 Jul 2006

5340-66-158-7595
Electronic Equipment Hardware Kit

661587595
BMA13777: RNCC: 3 | RNVC: 2

28 Jul 2010

5340-66-137-4718
Mounting Plate

661374718
K 39100: RNCC: 3 | RNVC: 2
K39100: RNCC: 3 | RNVC: 2

15 Jan 1993

5340-66-096-1395
Tee Hinge

5340-66-111-4778
General Purpose Resilient Mount

661114778
S22P: RNCC: 3 | RNVC: 2

12 Jun 1981

5340-66-150-0231
Swivel Caster

661500231
NO PRIMARY REF 66-150-0231: RNCC: 3 | RNVC: 2
04804105: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-125-4468
Access Cover

661254468
404-002-100: RNCC: 3 | RNVC: 2

21 Apr 1986

5340-66-148-8838
Blank Tag

661488838
OED-1749-17-45: RNCC: 3 | RNVC: 2

15 Nov 2002

5340-66-021-4242
Expansion Shield

660214242
LOXIN 5-16 IN.: RNCC: 3 | RNVC: 2
12-84474: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-130-3214
Manual Control Handle

661303214
382-812-020-401-A01: RNCC: 3 | RNVC: 2

9 Feb 1988

5340-66-128-5962
Rope Cleat

661285962
350133: RNCC: 3 | RNVC: 2
HYL9665: RNCC: 5 | RNVC: 2

26 Sep 1990

5340-66-154-8951
Mounting Bracket

661548951
15013504: RNCC: 3 | RNVC: 2

2 Oct 2006

5340-66-159-2090
Access Cover

661592090
15017821: RNCC: 3 | RNVC: 2

5 Apr 2011

5340-66-135-0891
Catch Strike

661350891
450017100: RNCC: 3 | RNVC: 2

14 May 1991

5340-66-128-6819
Dust And Moisture Seal Protective Cap

661286819
56PC2: RNCC: 3 | RNVC: 2

28 Jun 1993

5340-66-137-7233
Locking Head

661377233
1383-12/2B: RNCC: 3 | RNVC: 2

23 Mar 1993

5340-66-147-9398
Male Camlock To Bsp

661479398
AF100: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-66-150-0204
Rigid Caster

661500204
NO PRIMARY REF 66-150-0204: RNCC: 3 | RNVC: 2
01024356: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-142-4628
Mounting Bracket

661424628
471-90423-103T04: RNCC: 3 | RNVC: 2
517285: RNCC: 3 | RNVC: 2

20 Aug 1996

5340-66-159-1459
Elastic Strap

661591459
1100-02-0500C9-03: RNCC: 3 | RNVC: 2
QVRL1100020500C903: RNCC: 5 | RNVC: 2
1100-02-0500C9-03: RNCC: 6 | RNVC: 9

8 Mar 2011

5340-66-146-0865
Mounting Plate

661460865
438 0526-01: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-66-150-8232
Headless Straight Rod

661508232
BDI 8227: RNCC: 3 | RNVC: 2
BDI 8227: RNCC: 3 | RNVC: 2

18 Aug 2003

5340-66-129-8249
Tensioner Ratchet

661298249
20020ABS: RNCC: 3 | RNVC: 2

31 Oct 2000

5340-66-157-8859
Dust And Moisture Seal Protective Cap

661578859
GAST 412N: RNCC: 3 | RNVC: 2

4 May 2009

5340-66-138-0844
Swag Magnet Assembl

661380844
49: RNCC: 3 | RNVC: 2
MOD 2: RNCC: 3 | RNVC: 2

1 Oct 1993

5340-66-157-3862
Mounting Plate

661573862
AG-A0316: RNCC: 3 | RNVC: 2

31 Oct 2008

5340-66-150-0774
Expansion Shield

661500774
NO PRIMARY REF 66-150-0774: RNCC: 3 | RNVC: 2
01794302: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-093-1772
Spring Holder

5340-66-142-9676
Mounting Bracket

661429676
658/2/06409/003: RNCC: 3 | RNVC: 2

29 Apr 1997

5340-66-132-0954
Mounting Bracket

661320954
OM2-142451/2: RNCC: 3 | RNVC: 2
OM0-142341-21: RNCC: 5 | RNVC: 9

22 Mar 1989

5340-66-125-2431
General Purpose Resilient Mount

661252431
M140-50DUROMETER: RNCC: 3 | RNVC: 2

11 Dec 1985

5340-66-144-3778
Magnetic Base

661443778
RSBM: RNCC: 3 | RNVC: 2

30 Oct 1998

5340-66-147-2672
Overlay

661472672
DMM1214HO(C-120/C-140): RNCC: 3 | RNVC: 2

15 Dec 2000

5340-66-156-4440
Mounting Bracket

661564440
GTE-001-B: RNCC: 3 | RNVC: 2
D-0387: RNCC: 5 | RNVC: 2

27 Nov 2007

5340-66-144-1748
Stand Base

661441748
6460042/21-MOD1: RNCC: 3 | RNVC: 2
6460042/21: RNCC: 3 | RNVC: 2

24 Jun 1998

5340-66-143-7270
Mounting Bracket

661437270
658/2/06644/002: RNCC: 3 | RNVC: 2

2 Jul 1997

5340-66-146-3751
Snubber Assembly

661463751
427-B22-011: RNCC: 3 | RNVC: 2

17 Apr 2000

5340-66-160-0685
Mounting Bracket

661600685
471-20207-420TO1: RNCC: 3 | RNVC: 2

26 Mar 2012

5340-66-151-5786
Angle Bracket

661515786
LTA-A08-025: RNCC: 3 | RNVC: 1
LTA-A08-025-001: RNCC: 3 | RNVC: 2

21 Jul 2003

5340-66-135-9062
Mounting Bracket

661359062
ZSSIBRCK-CM: RNCC: 3 | RNVC: 2

10 Feb 1992

5340-66-156-4562
Webbing Strap

661564562
10006014-055: RNCC: 3 | RNVC: 2
10006014-055: RNCC: 5 | RNVC: 2
10006014-055: RNCC: 5 | RNVC: 2

29 Nov 2007

5340-66-142-8319
Handle Assembly

661428319
DF25-120-1: RNCC: 3 | RNVC: 2

29 Nov 1996

5340-66-161-4049
Manual Control Handle

661614049
42893P: RNCC: 3 | RNVC: 2

14 Oct 2013

5340-66-156-4566
Dirt And Liquid Deflector

661564566
5H1188: RNCC: 3 | RNVC: 2

29 Nov 2007

5340-66-155-6611
Vent Plug

661556611
471-50209-251: RNCC: 3 | RNVC: 2
514763: RNCC: 5 | RNVC: 2

3 May 2007

5340-66-148-3202
Webbing Strap

661483202
2902-DWG-58-M-9116 ITEMB: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-66-138-8084
Expansion Plug

661388084
120380-01810: RNCC: 3 | RNVC: 2

21 Apr 1994

5340-66-158-5437
Bumper

661585437
M190: RNCC: 3 | RNVC: 2
121097: RNCC: 5 | RNVC: 2
23-2643-01: RNCC: 5 | RNVC: 9

18 Mar 2010

5340-66-153-6491
Angle Bracket

661536491
TIS-002: RNCC: 3 | RNVC: 2

6 Oct 2005

5340-66-138-9683
Mounting Bracket

661389683
X50MF444: RNCC: 3 | RNVC: 2
0050-00-005-0444: RNCC: C | RNVC: 1

6 Dec 1993

5340-66-153-7655
T Bracket

661537655
47120117712-105: RNCC: 3 | RNVC: 2

26 Oct 2005

5340-66-154-9201
Mounting Bracket

661549201
RPC-FMB-RW-001-IBR: RNCC: 3 | RNVC: 2

6 Oct 2006

5340-66-123-4586
Bracket Assy

661234586
33-53377-101: RNCC: 3 | RNVC: 2

13 Dec 1985

5340-66-025-2720
Angle Bracket

660252720
ADE(M)37-22: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-077-5901
Hose Strap

660775901
12-80463: RNCC: 3 | RNVC: 2

11 Sep 1974

5340-66-147-6125
Elevating Arm

661476125
16241G-75-2-1: RNCC: 3 | RNVC: 2

19 Sep 2001

5340-66-154-5929
Mounting Bracket

661545929
NALM00184-5: RNCC: 3 | RNVC: 2
NALM00184-5: RNCC: 5 | RNVC: 1
NALM00184-5: RNCC: 5 | RNVC: 1

19 Jul 2006

5340-66-156-5950
Manual Control Lever

661565950
P10019-4: RNCC: 3 | RNVC: 2

1 Feb 2008

5340-66-143-4229
Mounting Plate

661434229
492370: RNCC: 3 | RNVC: 2

24 Apr 1998

5340-66-144-6076
Computer Retention

661446076
00-240423C: RNCC: 3 | RNVC: 2

16 Dec 1998

5340-66-128-6411
General Purpose Resilient Mount

661286411
STC434: RNCC: 3 | RNVC: 2

13 Aug 1992

5340-66-018-5707
Angle Bracket

660185707
ADE(V)225-674: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-147-9391
Male Connector To B

661479391
AA050: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-66-160-1337
Mounting Bracket

661601337
90-5916-01: RNCC: 3 | RNVC: 2

5 Apr 2012

5340-66-156-4603
Angle Bracket

661564603
15016369-02: RNCC: 3 | RNVC: 2

30 Nov 2007

5340-66-144-8137
Sliding Block

661448137
124130606: RNCC: 3 | RNVC: 2
124-130-606: RNCC: 5 | RNVC: 2

24 Mar 1999

5340-66-160-7110
General Purpose Access Door

661607110
15018498: RNCC: 3 | RNVC: 2

5 Nov 2012

5340-66-152-7919
Mounting Bracket

661527919
ECMA 0607: RNCC: 3 | RNVC: 2

17 Mar 2005

5340-66-022-0045
Threaded Rod End

660220045
F0M1088273-2: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-154-6467
General Purpose Access Door

661546467
6-036-3000: RNCC: 3 | RNVC: 2

2 Aug 2006

5340-66-144-4802
Webbing Strap

661444802
11-240316A-45: RNCC: 3 | RNVC: 2

11 Nov 1998

5340-66-144-7252
Handle Grip

661447252
MHC026: RNCC: 3 | RNVC: 2

7 Jan 1999

5340-66-146-3905
Sound Plug Sub-Asse

661463905
73193-3-51: RNCC: 3 | RNVC: 2

20 Apr 2000

5340-66-074-6529
Dust And Moisture Seal Protective Cap

660746529
970178-1-38: RNCC: 3 | RNVC: 2
3785-1-38: RNCC: 3 | RNVC: 2

7 Jun 1974

5340-66-140-5721
Webbing Strap

661405721
BR25-1-2.3M: RNCC: 3 | RNVC: 2
ARB25-2.3G: RNCC: 5 | RNVC: 2
004-125-1: RNCC: 5 | RNVC: 2

5 Jul 1995

5340-66-145-7863
Magnetic Pickup

661457863
DDM-001: RNCC: 3 | RNVC: 2

8 Nov 1999

5340-66-156-7204
General Purpose Access Door

661567204
BMF-A05-1487-01: RNCC: 3 | RNVC: 2

7 Mar 2008

5340-66-158-2605
Dust And Moisture Seal Protective Plug

661582605
274-505-008: RNCC: 3 | RNVC: 2

15 Oct 2009

5340-66-158-6814
Double Angle Bracket

661586814
RAY184035-1: RNCC: 3 | RNVC: 2
RAY184035-1: RNCC: 5 | RNVC: 2

3 Jun 2010

5340-66-158-6765
Mounting Plate

661586765
RAY184026-1: RNCC: 3 | RNVC: 2
RAY184026-1: RNCC: 5 | RNVC: 2

1 Jun 2010

5340-66-153-0914
Mounting Bracket

661530914
67RC59401M: RNCC: 3 | RNVC: 2

1 Jun 2005

5340-66-147-7888
Angle Bracket

661477888
F/2888-550-019D: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-019D: RNCC: 5 | RNVC: 2

24 Sep 2001

5340-66-108-9840
Access Cover

661089840
163P/0215/014 TYPE B: RNCC: 3 | RNVC: 1

18 Sep 1981

5340-66-156-1980
Mounting Bracket

661561980
15014182: RNCC: 3 | RNVC: 2

21 Sep 2007

5340-66-155-5057
Lever Bracket

661555057
35075: RNCC: 3 | RNVC: 2

3 Apr 2007

5340-66-140-4155
Handwheel

661404155
FE85088A100X9: RNCC: 3 | RNVC: 2

29 Mar 1995

5340-66-131-5753
Bracket

661315753
3285767R1: RNCC: 3 | RNVC: 2

7 Dec 1988

5340-66-143-4311
Manifold Block

661434311
492617: RNCC: 3 | RNVC: 2

27 Apr 1998

5340-66-151-0630
Access Cover

661510630
LTA-A05-071-001: RNCC: 3 | RNVC: 2
LTA-A05-071: RNCC: 5 | RNVC: 2

28 Apr 2003

5340-66-135-1305
Toggle Latch

661351305
99003: RNCC: 3 | RNVC: 2

15 Jul 1991

5340-66-142-9610
Hinge Block

661429610
AS 1204: RNCC: 3 | RNVC: 1
658/2/05259/000: RNCC: 3 | RNVC: 2

20 Mar 1997

5340-66-145-9505
Shield

661459505
2888-550-002E: RNCC: 3 | RNVC: 2
Q EDE 2888-550-002E: RNCC: 5 | RNVC: 2

16 Oct 2001

5340-66-154-6187
Runner

661546187
471-50806-145: RNCC: 3 | RNVC: 2
509457: RNCC: 5 | RNVC: 2

26 Jul 2006

5340-66-146-9008
Spring Tension Clip

661469008
HCB-01: RNCC: 3 | RNVC: 2

28 Sep 2000

5340-66-155-3389
Rod End Connector

661553389
275C-0199: RNCC: 3 | RNVC: 2

7 Mar 2007

5340-66-143-4307
Mounting Bracket

661434307
492487: RNCC: 3 | RNVC: 2

27 Apr 1998

5340-66-128-4463
Loop Clamp

661284463
AYG2692: RNCC: 3 | RNVC: 2

28 Oct 1987

5340-66-140-3861
Helical Compression Spring Seat

661403861
3A10-S4-014: RNCC: 3 | RNVC: 2
J20YHS400006400 ITEM 5: RNCC: 5 | RNVC: 2

20 Mar 1995

5340-66-154-6382
General Purpose Resilient Mount

661546382
471-20201-2: RNCC: 3 | RNVC: 2
511814: RNCC: 5 | RNVC: 2

1 Aug 2006

5340-66-088-1628
Barrel Bolt

660881628
1213-25108: RNCC: 3 | RNVC: 2

7 Apr 1975

5340-66-143-0981
Butt Hinge

661430981
SB554SS 100X75(SJA 0391): RNCC: 3 | RNVC: 2

5 May 1997

5340-66-145-2029
Override Assembly H

661452029
201988: RNCC: 3 | RNVC: 2
161632: RNCC: 5 | RNVC: 2

16 Aug 1999

5340-66-145-4516
Uut Retainers

661454516
608/2/52315: RNCC: 3 | RNVC: 2

20 Sep 1999

5340-66-100-4422
Pipe Hanger

661004422
AMR/SKY/133-2: RNCC: 3 | RNVC: 2

18 Feb 1979

5340-66-141-2023
General Purpose Resilient Mount

661412023
C100/48B: RNCC: 3 | RNVC: 2

25 Oct 1995

5340-66-108-9836
Access Cover

661089836
163P/0215/014 TYPE A: RNCC: 3 | RNVC: 1

18 Sep 1981

5340-66-153-5296
Stone Guard

661535296
DE252280015: RNCC: 3 | RNVC: 2

5 Sep 2005

5340-66-158-9438
Pad Eye

661589438
JG19210: RNCC: 3 | RNVC: 2
10008141: RNCC: 5 | RNVC: 2

3 Nov 2010

5340-66-158-3011
Mounting Plate

661583011
HYG2878: RNCC: 3 | RNVC: 2

30 Oct 2009

5340-66-155-9998
Mounting Bracket

661559998
1214374: RNCC: 3 | RNVC: 2

20 Jul 2007

5340-66-154-8712
General Purpose Resilient Mount

661548712
471-20201-4: RNCC: 3 | RNVC: 2

25 Sep 2006

5340-66-154-1299
Mounting Plate

661541299
DE252480009: RNCC: 3 | RNVC: 2

1 Mar 2006

5340-66-155-4873
Spring Holder

661554873
120270-66401: RNCC: 3 | RNVC: 2

2 Apr 2007

5340-66-128-5022
Multiple Angle Bracket

661285022
HYG2006: RNCC: 3 | RNVC: 2

12 Jan 1988

5340-66-141-6825
Mounting Bracket

661416825
D746A1900: RNCC: 3 | RNVC: 2

18 Oct 1996

5340-66-060-4226
Spacing Threaded Standoff

660604226
ADE(W)123-80: RNCC: 3 | RNVC: 2

27 Feb 1974

5340-66-160-8663
Double Angle Bracket

661608663
534.51.09.023: RNCC: 3 | RNVC: 2

13 Feb 2013

5340-66-146-8850
Loop Clamp

661468850
BRKT002: RNCC: 3 | RNVC: 2

11 Aug 2000

5340-66-120-6538
Clamp

661206538
X48RU310: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

17 Oct 1984

5340-66-146-0561
General Purpose Access Door

661460561
73221-2-03: RNCC: 3 | RNVC: 2
73221-2-03: RNCC: 5 | RNVC: 2

18 Apr 2000

5340-66-130-1476
Case Strap Bracket

661301476
404-001-105: RNCC: 3 | RNVC: 2

25 Sep 1987

5340-66-155-5092
Lever Bracket

661555092
196630-03944: RNCC: 3 | RNVC: 2

3 Apr 2007

5340-66-139-0187
Electronic Equipment Hardware Kit

661390187
MX-F232: RNCC: 3 | RNVC: 2
675/5/35881/000: RNCC: 3 | RNVC: 2

18 Oct 1995

5340-66-145-4333
Mounting Bracket

661454333
608/2/57992/001: RNCC: 3 | RNVC: 2

16 Sep 1999

5340-66-024-1182
Handle Grip

660241182
1424: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-088-9577
Loop Clamp

660889577
294419: RNCC: 3 | RNVC: 2

27 Jun 1975

5340-66-160-9375
Retaining Strap

661609375
DE253130002: RNCC: 3 | RNVC: 2

14 Mar 2013

5340-66-154-7256
Baffle Plate

661547256
15002221: RNCC: 3 | RNVC: 2

23 Aug 2006

5340-66-154-6865
Plain Solid Disk

661546865
VTR251-2TSUB14F4T19-7IIINM40W3P-: RNCC: 3 | RNVC: 1

14 Aug 2006

5340-66-147-7456
Mounting Strap

661477456
DU-026-A: RNCC: 3 | RNVC: 2
DU-026-A: RNCC: 5 | RNVC: 2

1 Aug 2001

5340-66-151-0704
Mounting Plate

661510704
LTA-A05-214: RNCC: 3 | RNVC: 2
LTA-A05-214-001: RNCC: 5 | RNVC: 2

6 May 2003

5340-66-139-0070
Angle Bracket

661390070
BYG2144: RNCC: 3 | RNVC: 2

20 Jan 1994

5340-66-152-6018
Mechanical Stop

661526018
1621002: RNCC: 3 | RNVC: 2
471-50812: RNCC: 3 | RNVC: 2

14 Dec 2004

5340-66-160-5056
Access Cover

661605056
RAY172003-1: RNCC: 3 | RNVC: 2

27 Aug 2012

5340-66-139-1942
Mounting Bracket

661391942
MEA 1756-3: RNCC: 3 | RNVC: 2

10 May 1994

5340-66-147-7589
Restraint Lock Bar

661477589
6671278-1: RNCC: 3 | RNVC: 2
6671278-1: RNCC: C | RNVC: 1

9 Aug 2001

5340-66-144-2905
Spacing Threaded Standoff

661442905
SCRHS50/5: RNCC: 3 | RNVC: 2

1 Oct 1998

5340-66-155-8668
Multiple Angle Bracket

661558668
X40RH424M1: RNCC: 3 | RNVC: 2

19 Jun 2007

5340-66-157-6619
General Purpose Access Door

661576619
138100 17110 K 0032: RNCC: 3 | RNVC: 2

3 Feb 2009

5340-66-150-0781
Expansion Shield

661500781
NO PRIMARY REF 66-150-0781: RNCC: 3 | RNVC: 2
01794904: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-121-0701
Strap Hinge

661210701
FG489: RNCC: 3 | RNVC: 2

16 Oct 1984

5340-66-142-3945
Turnbuckle

661423945
RF1584: RNCC: 3 | RNVC: 2

9 Jul 1996

5340-66-139-3285
Angle Bracket

661393285
DE250530359-2: RNCC: 3 | RNVC: 2

25 Jan 1996

5340-66-037-4277
Manual Control Lever

660374277
ADE(M)107-6: RNCC: 3 | RNVC: 2

22 Mar 1971

5340-66-159-5852
Mounting Bracket

661595852
STS-A05-3009-02: RNCC: 3 | RNVC: 2
STS-A05-3009: RNCC: 7 | RNVC: 2

14 Oct 2011

5340-66-155-5159
Mounting Bracket

661555159
471-41243-323: RNCC: 3 | RNVC: 2

4 Apr 2007

5340-66-157-4628
Webbing Strap

661574628
468-B9-1350: RNCC: 3 | RNVC: 2

26 Nov 2008

5340-66-151-1516
Access Cover

661511516
LTE-A16-0010: RNCC: 3 | RNVC: 1
LTE-A16-0010-01: RNCC: 3 | RNVC: 2

24 Jun 2003

5340-66-158-5936
Access Cover

661585936
1728-BH-1305-01: RNCC: 3 | RNVC: 2

7 Apr 2010

5340-66-097-7754
Sliding Stay

660977754
TMGB242B: RNCC: 3 | RNVC: 2

14 May 1978

5340-66-153-4185
Mounting Plate

661534185
15013083: RNCC: 3 | RNVC: 2

15 Aug 2005

5340-66-020-0078
Retaining Strap

5340-66-147-8875
Mounting Bracket

661478875
F/2888-550-035L: RNCC: 3 | RNVC: 2

29 Nov 2001

5340-66-033-0835
Filing Cabinet Lock

660330835
A/FR19-02-03B-N86: RNCC: 3 | RNVC: 2

7 Nov 1969

5340-66-158-1581
General Purpose Access Door

661581581
P10366-100-05: RNCC: 3 | RNVC: 2

8 Sep 2009

5340-66-155-0747
Mounting Bracket

661550747
ADF041-MC8175-308: RNCC: 3 | RNVC: 2

24 Nov 2006

5340-66-158-7592
Mounting Bracket

661587592
BMA-A09-0030-01: RNCC: 3 | RNVC: 2

28 Jul 2010

5340-66-154-6268
Mounting Bracket

661546268
471-51631-20: RNCC: 3 | RNVC: 2
524538: RNCC: 5 | RNVC: 2

31 Jul 2006

5340-66-156-9889
Runner

661569889
471-60801-145: RNCC: 3 | RNVC: 2
506720: RNCC: 5 | RNVC: 2

30 Jun 2008

5340-66-157-2287
Mounting Bracket

661572287
32MR29417M: RNCC: 3 | RNVC: 2
32MR29417M: RNCC: 5 | RNVC: 2

10 Sep 2008

5340-66-139-4484
Dust And Moisture Seal Protective Cap

661394484
640/2/30564/001: RNCC: 3 | RNVC: 2

2 Mar 1995

5340-66-159-4745
Quick Release Plunger

661594745
P10402-20: RNCC: 3 | RNVC: 2
50016366: RNCC: 5 | RNVC: 2

1 Aug 2011

5340-66-059-8396
Loop Clamp

660598396
204-061-254-001: RNCC: 3 | RNVC: 2

13 Jun 1973

5340-66-150-5771
General Purpose Resilient Mount

661505771
NO PRIMARY REF 66-150-5771: RNCC: 3 | RNVC: 2
02315612: RNCC: 5 | RNVC: 2

16 Apr 2003

5340-66-153-6678
Webbing Strap

661536678
9125D05044001-003: RNCC: 3 | RNVC: 2

11 Oct 2005

5340-66-149-5778
Permanent Magnet

661495778
NO PRIMARY REF 66-149-5778: RNCC: 3 | RNVC: 2
QTTMB2100: RNCC: 5 | RNVC: 2

7 Apr 2003

5340-66-153-2600
Mounting Bracket

661532600
DE 100450009: RNCC: 3 | RNVC: 2

4 Jul 2005

5340-66-144-9865
Padlock

661449865
PL260: RNCC: 3 | RNVC: 2

21 Jun 1999

5340-66-144-8915
Permanent Magnet

661448915
9/56/M5/5: RNCC: 3 | RNVC: 2
9/56/M5/5: RNCC: 5 | RNVC: 2

22 Apr 1999

5340-66-154-8404
Mounting Plate

661548404
ARLM0859-2: RNCC: 3 | RNVC: 2

15 Sep 2006

5340-66-147-6571
Webbing Strap

661476571
DT85049-G341/4: RNCC: 3 | RNVC: 2
FLSP-2000: RNCC: 3 | RNVC: 2
DT85049-G341/4: RNCC: 5 | RNVC: 2

30 Oct 2001

5340-66-021-4248
Expansion Shield

660214248
TAMPIN 3-16 IN: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-147-8578
Stowage Cabin Panel

661478578
F/2888-550-034G: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-034G: RNCC: 5 | RNVC: 2

25 Sep 2001

5340-66-152-6132
Nonmetallic Solid Wheel

661526132
2110908: RNCC: 3 | RNVC: 2
A00007-00167-C-0049: RNCC: 5 | RNVC: 2

11 Jan 2005

5340-66-153-4098
Mounting Plate

661534098
15012814-02: RNCC: 3 | RNVC: 2

12 Aug 2005

5340-66-157-9489
Extension Drawer Slide

661579489
2233578: RNCC: 3 | RNVC: 2
11000051-23-2: RNCC: 5 | RNVC: 9

26 May 2009

5340-66-128-4530
Dust And Moisture Seal Protective Plug

661284530
1117510051: RNCC: 3 | RNVC: 2
1117510051: RNCC: 5 | RNVC: 2
9117510381: RNCC: 5 | RNVC: 9

12 Jan 1988

5340-66-155-5804
Mounting Bracket

661555804
X50MU34B: RNCC: 3 | RNVC: 2

19 Apr 2007

5340-66-148-2300
Manual Control Handle

661482300
9612592805: RNCC: 3 | RNVC: 2

6 Mar 2002

5340-66-164-7813

5340-66-164-8048

5340-66-150-1388
Ear Plug Foam Dispe

661501388
NO PRIMARY REF 66-150-1388: RNCC: 3 | RNVC: 2
00827186: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-140-5457
Electronic Equipment Hardware Kit

661405457
MX-F227: RNCC: 3 | RNVC: 2
DE530020024: RNCC: 3 | RNVC: 2

8 Jun 1995

5340-66-156-3544
General Purpose Resilient Mount

661563544
NO PRIMARY REF 66-156-3544: RNCC: 3 | RNVC: 2
D-1769: RNCC: 5 | RNVC: 2

6 Nov 2007

5340-66-145-4189
Clamping Catch

661454189
HA4000: RNCC: 3 | RNVC: 2
HLOCK400: RNCC: 5 | RNVC: 2

11 Aug 1999

5340-66-161-0505
Bumper

661610505
REF 440: RNCC: 3 | RNVC: 2

3 May 2013

5340-66-049-4094
General Purpose Resilient Mount

660494094
2-0957-04: RNCC: 3 | RNVC: 2

24 Jun 1972

5340-66-155-2118
Leakproof Seal Plug

661552118
P04-TPLGNYL04500: RNCC: 3 | RNVC: 2

18 Jan 2007

5340-66-159-7696
Butt Hinge

661597696
AG HINGE LH: RNCC: 3 | RNVC: 2

16 Feb 2012

5340-66-158-0803
Angle Bracket

661580803
15018999: RNCC: 3 | RNVC: 2

31 Jul 2009

5340-66-148-2656
Strap Fastener Loop

661482656
5340-057: RNCC: 3 | RNVC: 2
DEF(AUST)2010: RNCC: 4 | RNVC: 1

9 May 2002

5340-66-148-9695
Access Cover

661489695
1D04010500594-3: RNCC: 3 | RNVC: 2

18 Jun 2002

5340-66-164-7815

5340-66-158-2177
Headless Straight Rod

661582177
BMU-A05-3002-01: RNCC: 3 | RNVC: 2

1 Oct 2009

5340-66-138-9255
Spacing Threaded Standoff

661389255
630/2/47443/002: RNCC: 3 | RNVC: 2

29 Oct 1993

5340-66-154-2619
Webbing Strap

661542619
8005-0018: RNCC: 3 | RNVC: 2

7 Apr 2006

5340-66-161-1728
Access Cover

661611728
15015833-05: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-66-153-7081
Retaining Clip

661537081
47110411103-139: RNCC: 3 | RNVC: 2

17 Oct 2005

5340-66-032-0385
Clamping Catch

660320385
ADE(W)73-60 ISSUE 1: RNCC: 3 | RNVC: 2

15 Apr 1969

5340-66-130-2803
Access Cover

661302803
MEA 1307-22: RNCC: 3 | RNVC: 2

16 Feb 1988

5340-66-151-1019
Mounting Bracket

661511019
LTA-A16-001: RNCC: 3 | RNVC: 2
LTA-A16-001-001: RNCC: 3 | RNVC: 2

21 May 2003

5340-66-158-3030
Electronic Equipment Hardware Kit

661583030
FA265-0: RNCC: 3 | RNVC: 2

4 Nov 2009

5340-66-161-1813
Access Cover

661611813
15019744: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-66-154-6270
Mounting Bracket

661546270
471-51631-21: RNCC: 3 | RNVC: 2
524544: RNCC: 5 | RNVC: 2

31 Jul 2006

5340-66-133-6452
Webbing Strap

661336452
41030-10: RNCC: 3 | RNVC: 2

12 Feb 1990

5340-66-107-7386
Angle Bracket

661077386
446D2114-081SH1: RNCC: 3 | RNVC: 2

4 Aug 1980

5340-66-153-2885
Mounting Bracket

661532885
A210 0333: RNCC: 3 | RNVC: 2

6 Jul 2005

5340-66-140-3865
Helical Compression Spring Seat

661403865
3A52-R2-085: RNCC: 3 | RNVC: 2
J20YHS400006400 ITEM 14: RNCC: 5 | RNVC: 2

21 Mar 1995

5340-66-156-3766
General Purpose Resilient Mount

661563766
10001442-11: RNCC: 3 | RNVC: 2
298-3036: RNCC: 5 | RNVC: 2

13 Nov 2007

5340-66-133-7920
Mounting Bracket

661337920
523.15.09.030: RNCC: 3 | RNVC: 2

13 Jun 1997

5340-66-158-0323
Pin Toggle

661580323
HYM0937: RNCC: 3 | RNVC: 2

25 Jun 2009

5340-66-093-6291
Recess Handle

660936291
1115: RNCC: 3 | RNVC: 2

12 Jun 1971

5340-66-020-7926
Mounting Bracket

660207926
WALLMTDXRAYFILMHANGERBRACKET: RNCC: 3 | RNVC: 2

22 Aug 1962

5340-66-147-7923
Lever Support Frame

661477923
F/2888-550-033A: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-033A: RNCC: 5 | RNVC: 2

24 Sep 2001

5340-66-128-7264
Multiple Angle Bracket

661287264
700453: RNCC: 3 | RNVC: 2
HYL9131: RNCC: 5 | RNVC: 2
0068-00-070-0454: RNCC: C | RNVC: 1

26 Aug 1993

5340-66-148-9973
Webbing Strap

661489973
3212DD01: RNCC: 3 | RNVC: 2

28 Aug 2002

5340-66-148-7754
Access Cover

661487754
BE6036: RNCC: 3 | RNVC: 2

23 Jul 2002

5340-66-075-4251
Retaining Strap

660754251
RANTE2799-4: RNCC: 3 | RNVC: 2

25 Jul 1974

5340-66-164-8027

5340-66-164-7821

5340-66-154-9023
Mounting Plate

661549023
471-20027-100: RNCC: 3 | RNVC: 2
512319: RNCC: 5 | RNVC: 2

4 Oct 2006

5340-66-155-6405
Spring Holder

661556405
471-30429-102: RNCC: 3 | RNVC: 2
522451: RNCC: 5 | RNVC: 2

1 May 2007

5340-66-147-8826
Locking Clamp

661478826
F/2888-575-022V: RNCC: 3 | RNVC: 2

27 Nov 2001

5340-66-153-8475
Dust And Moisture Seal Protective Cover

661538475
57249: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-66-146-7799
Stator Support Ring

661467799
RE AB1 4710A: RNCC: 3 | RNVC: 2

18 Sep 2000

5340-66-159-5842
Mounting Plate

661595842
STS-A05-2007-01: RNCC: 3 | RNVC: 2
STS-A05-2007: RNCC: 7 | RNVC: 2

13 Oct 2011

5340-66-138-8437
Antipilferage Seal

661388437
HA03615: RNCC: 3 | RNVC: 2

29 Apr 1994

5340-66-066-4261
Angle Bracket

660664261
179584K: RNCC: 3 | RNVC: 2

27 Feb 1974

5340-66-124-7928
Angle Bracket

661247928
17508Z4: RNCC: 3 | RNVC: 2

19 Nov 1985

5340-66-156-0953
Headless Straight Rod

661560953
90320: RNCC: 3 | RNVC: 2
90320-TPL77-B12: RNCC: 3 | RNVC: 2

23 Aug 2007

5340-66-155-4507
Bumper

661554507
20Y-54-11611: RNCC: 3 | RNVC: 2
20Y-54-11611: RNCC: 5 | RNVC: 2

28 Mar 2007

5340-66-150-4012
Strapping Seal

661504012
NO PRIMARY REF 66-150-4012: RNCC: 3 | RNVC: 2
01707603: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-155-2303
Mounting Plate

661552303
471-21601-51: RNCC: 3 | RNVC: 2
471-21601-51: RNCC: 5 | RNVC: 2

30 Jan 2007

5340-66-152-3822
Angle Bracket

661523822
15009445: RNCC: 3 | RNVC: 2
LA4-7: RNCC: 3 | RNVC: 2

16 Oct 2004

5340-66-031-3881
Dust And Moisture Seal Boot

660313881
TSE(W)9-32ISSUE4: RNCC: 3 | RNVC: 2

17 May 1969

5340-66-038-8918
Clip-Connector

660388918
30-53310-10: RNCC: 3 | RNVC: 2

5 Feb 1971

5340-66-130-5990
Handwheel

661305990
71 PH 94: RNCC: 3 | RNVC: 2

1 Mar 1988

5340-66-067-5793
Angle Bracket

660675793
8327446: RNCC: 3 | RNVC: 2

1 Sep 1974

5340-66-159-0366
Dust And Moisture Seal Protective Cap

661590366
L59024: RNCC: 3 | RNVC: 2
L59024: RNCC: 5 | RNVC: 2

15 Dec 2010

5340-66-151-5923
Padlock

661515923
234/45/248/5KD: RNCC: 3 | RNVC: 2
234/45: RNCC: 5 | RNVC: 1

18 Aug 2003

5340-66-159-3593
Spacing Threaded Standoff

661593593
TF02060-1: RNCC: 3 | RNVC: 2

15 Jun 2011

5340-66-150-4144
Screw Thread Insert And Tool Assortment

661504144
NO PRIMARY REF 66-150-4144: RNCC: 3 | RNVC: 2
06462008: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-161-0103
Turnbuckle

661610103
DE0-00001-90: RNCC: 3 | RNVC: 2

17 Apr 2013

5340-66-150-3727
Spring Tension Clip

661503727
NO PRIMARY REF 66-150-3727: RNCC: 3 | RNVC: 2
00919870: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-122-9741
Retaining Clip

661229741
699-64839: RNCC: 3 | RNVC: 2

27 Jun 1985

5340-66-083-3782
Door Clip

660833782
20-02495179: RNCC: 3 | RNVC: 2

25 Mar 1975

5340-66-128-7749
Nonmetallic Bumper

661287749
4255201941: RNCC: 3 | RNVC: 2
0064-25-520-1941: RNCC: C | RNVC: 1

29 Sep 1993

5340-66-151-8790
Loop Clamp

661518790
LTA09111: RNCC: 3 | RNVC: 2

28 Jan 2004

5340-66-164-7832

5340-66-039-6449
Handle Grip

660396449
P212-550: RNCC: 3 | RNVC: 2

5 May 1971

5340-66-036-9889
Retaining Clip

660369889
EUC185: RNCC: 3 | RNVC: 2

28 Aug 1970

5340-66-144-6764
Webbing Strap

661446764
438B: RNCC: 3 | RNVC: 2

30 Mar 1999

5340-66-160-7779
Mounting Bracket

661607779
15017159: RNCC: 3 | RNVC: 2

5 Dec 2012

5340-66-129-5976
Inte Caving Ladder

661295976
CLFI-0-1000-0.2: RNCC: 3 | RNVC: 2

7 Apr 2000

5340-66-157-5968
Bumper

661575968
G10-2018: RNCC: 3 | RNVC: 2
G2-22009: RNCC: 5 | RNVC: 9

19 Jan 2009

5340-66-160-3595
Mechanic Equipment Hardware Kit

661603595
1749808: RNCC: 3 | RNVC: 2

25 Jun 2012

5340-66-054-4586
Helical Compression Spring Seat

660544586
CA14-22: RNCC: 3 | RNVC: 2

20 Nov 1972

5340-66-102-6639
Padlock

661026639
1551-09: RNCC: 3 | RNVC: 2

21 Aug 1979

5340-66-160-2346
Blank Panel

661602346
FP050R: RNCC: 3 | RNVC: 2
121135: RNCC: 5 | RNVC: 2
SQIR-5907: RNCC: 5 | RNVC: 2

3 May 2012

5340-66-158-8489
Mounting Bracket

661588489
CVT-BPT-001: RNCC: 3 | RNVC: 2

27 Aug 2010

5340-66-151-8744
Rod End Clevis

661518744
LTA-A03-001: RNCC: 3 | RNVC: 1
LTA-A03-0151-01: RNCC: 3 | RNVC: 2

26 Nov 2003

5340-66-160-3476
Access Cover

661603476
63.31.204: RNCC: 3 | RNVC: 2
63.31.204: RNCC: 5 | RNVC: 2

21 Jun 2012

5340-66-160-8453
Angle Bracket

661608453
571.10.09.351: RNCC: 3 | RNVC: 2

5 Feb 2013

5340-66-160-9500
Retaining Strap

661609500
BMD-A26-0028-02: RNCC: 3 | RNVC: 2

21 Mar 2013

5340-66-161-2920
Webbing Strap

661612920
20040F00-00-0X09: RNCC: 3 | RNVC: 2

22 Aug 2013

5340-66-160-2087
Mounting Plate

661602087
BMP-A05-3004-01: RNCC: 3 | RNVC: 2

26 Apr 2012

5340-66-138-6333
Mounting Bracket

661386333
B831F339/21: RNCC: 3 | RNVC: 2

25 Feb 1994

5340-66-142-2793
General Purpose Resilient Mount

661422793
P471-90200-101T07: RNCC: 3 | RNVC: 2

4 May 1996

5340-66-155-8798
Mounting Bracket

661558798
471-50824-103: RNCC: 3 | RNVC: 2
509585: RNCC: 5 | RNVC: 2

22 Jun 2007

5340-66-146-9097
Angle Of Rotation L

661469097
ZDB-AF2: RNCC: 3 | RNVC: 2

4 Oct 2000

5340-66-147-9415
Male Camlock To Hos

661479415
AE050: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-66-128-7793
Strap

661287793
71609-90302: RNCC: 3 | RNVC: 2
2530-97-151-3163: RNCC: C | RNVC: 1

20 Oct 1993

5340-66-156-0217
Mounting Plate

661560217
471-41260-109: RNCC: 3 | RNVC: 2
522481: RNCC: 5 | RNVC: 2

25 Jul 2007

5340-66-158-2261
Mounting Plate

661582261
BMU-A05-3026-01: RNCC: 3 | RNVC: 2
BMU-A05-3026: RNCC: 5 | RNVC: 2

5 Oct 2009

5340-66-159-8162
General Purpose Resilient Mount

661598162
P471-80200-101T25: RNCC: 3 | RNVC: 2

22 Feb 2012

5340-66-139-2039
Dust And Moisture Seal Boot

661392039
CR65-02-012: RNCC: 3 | RNVC: 2

19 May 1994

5340-66-156-2624
Spring Holder

661562624
471-90429-121: RNCC: 3 | RNVC: 2
502042: RNCC: 5 | RNVC: 2

11 Oct 2007

5340-66-157-9326
Wedge Support

661579326
471-90037-105: RNCC: 3 | RNVC: 2
1266901: RNCC: 5 | RNVC: 2
471-90037-105: RNCC: 5 | RNVC: 2

20 May 2009

5340-66-147-9406
Female Camlock To B

661479406
AD100: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-66-155-1099
Access Cover

661551099
ILS400-2: RNCC: 3 | RNVC: 2

5 Dec 2006

5340-66-138-9380
Handle

661389380
69260-10060-01: RNCC: 3 | RNVC: 2
2530-97-151-3275: RNCC: C | RNVC: 1

2 Nov 1993

5340-66-147-2555
Dryer Top Panel

661472555
DAC274A7(ASCLUG.700): RNCC: 3 | RNVC: 2

12 Dec 2000

5340-66-154-8406
Mounting Plate

661548406
ARLM0860-2: RNCC: 3 | RNVC: 2

15 Sep 2006

5340-66-145-6582
Dust And Moisture Seal Protective Cap-Plug

661456582
MA 803 B: RNCC: 3 | RNVC: 2

24 Nov 1999

5340-66-142-3229
Antipilferage Seal

661423229
2A: RNCC: 3 | RNVC: 2
STANDARD TYPE 2A: RNCC: 3 | RNVC: 2

29 May 1996

5340-66-124-5108
General Purpose Resilient Mount

661245108
M503-20292-40: RNCC: 3 | RNVC: 2

13 Sep 1985

5340-66-155-6293
Gradiometer Adaptor

661556293
NALM00649-125: RNCC: 3 | RNVC: 2
AN/ASQ504: RNCC: 5 | RNVC: 9

30 Apr 2007

5340-66-157-5165
Mounting Bracket

661575165
V0507-CE-1511: RNCC: 3 | RNVC: 2

8 Dec 2008

5340-66-150-0203
Rigid Caster

661500203
NO PRIMARY REF 66-150-0203: RNCC: 3 | RNVC: 2
04815709: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-164-7726

5340-66-156-8643
General Purpose Resilient Mount

661568643
C20/30A: RNCC: 3 | RNVC: 2
1119564: RNCC: 5 | RNVC: 2

12 May 2008

5340-66-085-1583
Retaining Clip

660851583
F10-388644: RNCC: 3 | RNVC: 2

16 Mar 1975

5340-66-115-9273
Loop Clamp

661159273
LS4605-5-4: RNCC: 3 | RNVC: 2

9 Feb 1983

5340-66-126-8267
Bracket

661268267
DE(EMEI)85-3: RNCC: 3 | RNVC: 2

2 Jul 1986

5340-66-151-7063
Loop Clamp

661517063
LTA08110: RNCC: 3 | RNVC: 2

17 Sep 2003

5340-66-155-6175
Mounting Plate

661556175
P10012-1: RNCC: 3 | RNVC: 2

26 Apr 2007

5340-66-164-8032

5340-66-150-3724
Spring Tension Clip

661503724
NO PRIMARY REF 66-150-3724: RNCC: 3 | RNVC: 2
06602415: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-108-9839
Access Cover

661089839
163P/0215/014 TYPE B: RNCC: 3 | RNVC: 1

12 Feb 1981

5340-66-134-4267
Rod End Connector

661344267
703-48345-01: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-66-150-7483
Rubber Bumper

661507483
SP13005R: RNCC: 3 | RNVC: 2
42-15-01: RNCC: 3 | RNVC: 2

6 Jun 2003

5340-66-161-0888
Mounting Bracket

661610888
P10102-04: RNCC: 3 | RNVC: 2

30 May 2013

5340-66-156-5039
Mounting Bracket

661565039
471-62810-1: RNCC: 3 | RNVC: 2
501376: RNCC: 5 | RNVC: 2

13 Dec 2007

5340-66-118-3662
Plain Solid Disk

661183662
03.320.73.02.0: RNCC: 3 | RNVC: 2

6 Mar 1984

5340-66-156-7098
Cushioning Pad

661567098
BMF-A30-0030: RNCC: 3 | RNVC: 2
BMF-A30-0030-01: RNCC: 3 | RNVC: 2

4 Mar 2008

5340-66-157-3173
Lock Bar

661573173
MM-0080-Z106: RNCC: 3 | RNVC: 2

8 Oct 2008

5340-66-157-7316
Access Cover

661577316
503 62 82-02: RNCC: 3 | RNVC: 2
503 62 82-02: RNCC: 5 | RNVC: 2

2 Mar 2009

5340-66-155-4187
General Purpose Access Door

661554187
BME-A05-0295-01: RNCC: 3 | RNVC: 2

23 Mar 2007

5340-66-152-3272
General Purpose Resilient Mount

661523272
DTSPB: RNCC: 3 | RNVC: 2
MLC-0461: RNCC: 5 | RNVC: 2

31 Aug 2004

5340-66-146-2042
Mounting Bracket

661462042
487 0033-01: RNCC: 3 | RNVC: 2

14 Feb 2000

5340-66-126-4490
Access Cover

661264490
QT50.1.11: RNCC: 3 | RNVC: 2

14 Mar 1991

5340-66-157-4910
Damper

661574910
2 818 513: RNCC: 3 | RNVC: 2

1 Dec 2008

5340-66-140-5664
Ha Bracket Assembly

661405664
004-224-01: RNCC: 3 | RNVC: 2

12 May 1995

5340-66-143-0984
Indicator

661430984
Q1 C31: RNCC: 3 | RNVC: 2
QIC-31: RNCC: 3 | RNVC: 2

5 May 1997

5340-66-147-8586
Threat Metal Plate

661478586
F/2888/550-051D: RNCC: 3 | RNVC: 2
Q EDE F/2888/550-051D: RNCC: 5 | RNVC: 2

25 Sep 2001

5340-66-150-2034
Support Hook

661502034
NO PRIMARY REF 66-150-2034: RNCC: 3 | RNVC: 2
04407852: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-142-6590
Mounting Bracket

661426590
DSA-10-389-10: RNCC: 3 | RNVC: 2

14 Jan 1997

5340-66-143-0557
Mounting Plate

661430557
DSA-23-681-26: RNCC: 3 | RNVC: 2

20 Mar 1997

5340-66-156-5115
Nut And Bolt Locking Plate

661565115
471-62810-147: RNCC: 3 | RNVC: 2
501426: RNCC: 5 | RNVC: 2

17 Dec 2007

5340-66-155-5237
Manual Control Handle

661555237
471-30466-600: RNCC: 3 | RNVC: 2
501775: RNCC: 5 | RNVC: 2

10 Apr 2007

5340-66-150-0215
Rigid Caster

661500215
NO PRIMARY REF 66-150-0215: RNCC: 3 | RNVC: 2
05216213: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-164-7831

5340-66-129-2029
Metal Grille

661292029
69/82FIG4B: RNCC: 3 | RNVC: 1

16 Sep 1987

5340-66-155-9955
Mounting Bracket

661559955
1 216 975: RNCC: 3 | RNVC: 2

20 Jul 2007

5340-66-158-9341
Lock Bar

661589341
4001 15015-9: RNCC: 3 | RNVC: 2

27 Oct 2010

5340-66-138-8623
Drain Plug

661388623
46146101: RNCC: 3 | RNVC: 2

10 May 1994

5340-66-082-8693
Handwheel

660828693
S3510: RNCC: 3 | RNVC: 2
005-741129: RNCC: 3 | RNVC: 2
001-999007Q5-2: RNCC: 5 | RNVC: 2

30 May 2002

5340-66-145-4778
Desk Top Plate

661454778
608/2/57743/000: RNCC: 3 | RNVC: 2

24 Sep 1999

5340-66-095-7216
Manual Control Lever

660957216
163P/0217/059 ITEM D: RNCC: 3 | RNVC: 2

10 Sep 1977

5340-66-043-9832
Catch Strike

660439832
ADE(W)67-157 ISSUE 2: RNCC: 3 | RNVC: 2

25 Aug 1971

5340-66-153-2989
Rod End Clevis

661532989
DE 100450045: RNCC: 3 | RNVC: 2

7 Jul 2005

5340-66-158-4513
Webbing Strap

661584513
LSM-CHDJ-4: RNCC: 3 | RNVC: 2

27 Jan 2010

5340-66-142-9686
Mounting Plate

661429686
658/2/06636/000: RNCC: 3 | RNVC: 2

29 Apr 1997

5340-66-157-6753
Air T Duct Assembly

661576753
HP/TAN/TI-SP:CE(2M): RNCC: 3 | RNVC: 2
D-2610: RNCC: 5 | RNVC: 2

6 Feb 2009

5340-66-147-8582
Stowage Cabin Panel

661478582
F/2888-550-034F: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-034F: RNCC: 5 | RNVC: 2

25 Sep 2001

5340-66-145-4679
Mounting Bracket

661454679
608/2/57953/000: RNCC: 3 | RNVC: 2

23 Sep 1999

5340-66-151-5829
Manual Control Lever

661515829
LTA-A07-064-001: RNCC: 3 | RNVC: 2
LTA-A07-064: RNCC: 5 | RNVC: 2

22 Jul 2003

5340-66-152-8857
Spreader Plate

661528857
DE252180016: RNCC: 3 | RNVC: 2

27 May 2005

5340-66-155-8024
Metal Grille

661558024
471-20030-140T01: RNCC: 3 | RNVC: 2
471-20030-140T01: RNCC: 5 | RNVC: 2

1 Jun 2007

5340-66-156-1188
Manual Control Handle

661561188
471-40007-475: RNCC: 3 | RNVC: 2
515691: RNCC: 5 | RNVC: 2

30 Aug 2007

5340-66-018-8024
Hand Crank

660188024
ADE(W)2-237: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-157-4185
Access Cover

661574185
471-51805-143-T01: RNCC: 3 | RNVC: 2
525405: RNCC: 5 | RNVC: 2

14 Nov 2008

5340-66-156-5075
Seal Retaining Plate

661565075
471-62808-100-T02: RNCC: 3 | RNVC: 2
502738: RNCC: 5 | RNVC: 2

13 Dec 2007

5340-66-142-9094
Locating Block

661429094
658/2/06460/000: RNCC: 3 | RNVC: 2

27 Feb 1997

5340-66-156-0448
General Purpose Resilient Mount

661560448
SES4/92134/55: RNCC: 3 | RNVC: 2

7 Aug 2007

5340-66-135-7150
Loop Clamp

661357150
90461-08073: RNCC: 3 | RNVC: 2

7 Jan 1992

5340-66-159-2924
Loop Clamp

661592924
640/1/34391/033: RNCC: 3 | RNVC: 2

26 May 2011

5340-66-157-2872
Retaining Clip

661572872
10026841: RNCC: 3 | RNVC: 2
10026841-BUND: RNCC: 5 | RNVC: 2

29 Sep 2008

5340-66-154-6652
Access Cover

661546652
VTR251-2TSUB14F4T19-7IIINM40W3P-: RNCC: 3 | RNVC: 1

8 Aug 2006

5340-66-158-5606
Mechanical Stop

661585606
P10285: RNCC: 3 | RNVC: 2

25 Mar 2010

5340-66-148-8511
Chain Breather Clip

661488511
OED-1749-09-27: RNCC: 3 | RNVC: 2

24 Oct 2002

5340-66-147-6471
Dust And Moisture Seal Protective Cap

661476471
A53-997-B2180-0H00: RNCC: 3 | RNVC: 2

18 Oct 2001

5340-66-147-7609
Rest Cover Assembly

661477609
6671324-9: RNCC: 3 | RNVC: 2
6671324-9: RNCC: C | RNVC: 1

13 Aug 2001

5340-66-161-0243
Mounting Plate

661610243
M90-000133---: RNCC: 3 | RNVC: 2
M90-000133---: RNCC: 5 | RNVC: 2

24 Apr 2013

5340-66-155-7974
Mounting Bracket

661557974
G2-22501: RNCC: 3 | RNVC: 2

31 May 2007

5340-66-155-8476
Finger

661558476
471-51806-105T02: RNCC: 3 | RNVC: 2
504321: RNCC: 5 | RNVC: 2

15 Jun 2007

5340-66-113-8245
Webbing Strap

661138245
109711: RNCC: 3 | RNVC: 1
109711: RNCC: 5 | RNVC: 2

19 Oct 1983

5340-66-140-6709
Angle Bracket

661406709
DE250530359-1: RNCC: 3 | RNVC: 2

22 Jan 1996

5340-66-143-9068
Webbing Strap

661439068
DPD/4010/2033: RNCC: 3 | RNVC: 1
9WS1332: RNCC: 3 | RNVC: 2

3 Sep 1997

5340-66-156-1474
Mounting Bracket

661561474
15015833-01: RNCC: 3 | RNVC: 2

6 Sep 2007

5340-66-154-5183
Retaining Strap

661545183
MH-A551-0135-A4: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-66-128-8727
Cover Left Hand

661288727
47704-60031: RNCC: 3 | RNVC: 2
2530-97-151-3254: RNCC: C | RNVC: 1

25 Oct 1993

5340-66-155-6266
Mounting Bracket

661556266
BME-A05-0257-01: RNCC: 3 | RNVC: 2

30 Apr 2007

5340-66-160-4145
Electronic Equipment Hardware Kit

661604145
010-00176-01AUS: RNCC: 3 | RNVC: 2

13 Jul 2012

5340-66-058-1898
Rod End Clevis

660581898
AH20313: RNCC: 3 | RNVC: 2
678-082397: RNCC: 3 | RNVC: 2
H678 082397: RNCC: 3 | RNVC: 2

8 Jun 1973

5340-66-154-6436
Vibration Absorber

661546436
471-20201-8TO1: RNCC: 3 | RNVC: 2
513633: RNCC: 5 | RNVC: 2

1 Aug 2006

5340-66-148-3956
Mounting Plate

661483956
1529-2517/1: RNCC: 3 | RNVC: 2

8 Mar 2002

5340-66-152-4930
Holder Bracket

661524930
HRV300002001: RNCC: 3 | RNVC: 2

17 Jul 2004

5340-66-150-3725
Spring Tension Clip

661503725
NO PRIMARY REF 66-150-3725: RNCC: 3 | RNVC: 2
09863918: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-010-1439
Mortise Lock Set

660101439
9711-1000: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-148-4227
Reflector Mati Kit

661484227
201192: RNCC: 3 | RNVC: 2

17 Apr 2002

5340-66-149-5767
Permanent Magnet

661495767
NO PRIMARY REF 66-149-5767: RNCC: 3 | RNVC: 2
300507: RNCC: 5 | RNVC: 2

27 Jun 2003

5340-66-142-2128
Rod End Clevis

661422128
VG85211-1-6 DIN 931: RNCC: 2 | RNVC: 2
VG85211-1-6 DIN 931: RNCC: 3 | RNVC: 2

3 Apr 1996

5340-66-146-4694
Mounting Bracket

5340-66-146-3686

5340-66-156-4377
Metal Block

661564377
15016458: RNCC: 3 | RNVC: 2

27 Nov 2007

5340-66-066-0314
Dust And Moisture Seal Protective Cap

660660314
MEMOLCH211: RNCC: 3 | RNVC: 2

13 Jan 1974

5340-66-056-0002
Retaining Strap

660560002
78-061E7106: RNCC: 3 | RNVC: 2

24 Apr 1973

5340-66-155-3615
Cobra Head Holder

661553615
471-51004-110: RNCC: 3 | RNVC: 2
524221: RNCC: 5 | RNVC: 2

13 Mar 2007

5340-66-153-9877
Manual Control Lever

661539877
S245321000/791978/134372: RNCC: 3 | RNVC: 2

11 Jan 2006

5340-66-134-4951
Utility Resilient Mount

661344951
M139-60: RNCC: 3 | RNVC: 2
BMA23677: RNCC: 5 | RNVC: 2

28 Apr 2005

5340-66-156-7795
Catch Strike

661567795
33147: RNCC: 3 | RNVC: 2
33147: RNCC: 3 | RNVC: 2
33147: RNCC: 5 | RNVC: 2
33147: RNCC: 5 | RNVC: 2

4 Apr 2008

5340-66-093-1312
Circlip

660931312
300LP3: RNCC: 3 | RNVC: 2

30 Jan 1977

5340-66-161-2544
Clevis And U-Bolt

661612544
CSWUBMC5: RNCC: 3 | RNVC: 2
BP5685629: RNCC: 5 | RNVC: 2

8 Aug 2013

5340-66-154-5813
Retaining Strap

661545813
C14535: RNCC: 3 | RNVC: 2

12 Jul 2006

5340-66-024-4722
Double Angle Bracket

660244722
ADE(W)28-112-2ISSUE2: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-151-2491
Loop Clamp

661512491
SY-D21600-2: RNCC: 3 | RNVC: 2

20 Jan 2005

5340-66-122-6864
Dust And Moisture Seal Boot

661226864
25159806: RNCC: 3 | RNVC: 2
25159806: RNCC: 3 | RNVC: 2
8MY 324: RNCC: 3 | RNVC: 9
8MY352: RNCC: 3 | RNVC: 9
8MY324: RNCC: 5 | RNVC: 2

16 Oct 1984

5340-66-147-2316
Coalescer Barrel

661472316
002/301/GMOWS.3030.03: RNCC: 3 | RNVC: 2

29 Nov 2000

5340-66-149-7145
Permanent Magnet

661497145
NO PRIMARY REF 66-149-7145: RNCC: 3 | RNVC: 2
06955201: RNCC: 5 | RNVC: 2

10 Apr 2003

5340-66-146-3732
Mounting Bracket

661463732
73156-1-12: RNCC: 3 | RNVC: 2

18 Apr 2000

5340-66-159-2679
Thumb Latch

661592679
P10567-07: RNCC: 3 | RNVC: 2
P10567 ITEM 5: RNCC: 5 | RNVC: 2

10 May 2011

5340-66-147-7412
Mounting Bracket

661477412
OED-1749-9-09: RNCC: 3 | RNVC: 2

27 Jul 2001

5340-66-144-5019
Butt Hinge

661445019
ASS-2.0-18: RNCC: 3 | RNVC: 2
ASS-2.0-18: RNCC: 5 | RNVC: 2

25 Nov 1998

5340-66-152-0995
Loop Clamp

661520995
240420: RNCC: 3 | RNVC: 2
240420: RNCC: 5 | RNVC: 2

19 May 2004

5340-66-147-7898
Rest Pad

661477898
F/2888-520-006F: RNCC: 3 | RNVC: 2

24 Sep 2001

5340-66-139-9670
General Purpose Resilient Mount

661399670
03315 SH26: RNCC: 3 | RNVC: 1
03315 SH26: RNCC: 3 | RNVC: 1
100123/2P15/55SH: RNCC: 3 | RNVC: 2
100123/2P15/55SHORE/NR/ST37-2: RNCC: 3 | RNVC: 2
331903: RNCC: 3 | RNVC: 2
100123/2P15/55SHORE/NR/ST37-2: RNCC: 3 | RNVC: 2
404 405: RNCC: 5 | RNVC: 2

13 Oct 1994

5340-66-027-4424
Dust And Moisture Seal Protective Cap

660274424
NA1-1-2-2: RNCC: 3 | RNVC: 2
MILC2P487: RNCC: 4 | RNVC: 1
NA40-2AA: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-66-147-5811
Mounting Bracket

661475811
ON634526-2: RNCC: 3 | RNVC: 2

6 Aug 2001

5340-66-013-6963
Strap End Clip

660136963
MGO(M)494 ITEM 9: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-140-6080
Bottom. Cover

661406080
004-016-2: RNCC: 3 | RNVC: 2

12 May 1995

5340-66-099-0859
Mounting Bracket

660990859
3A10-0308-04: RNCC: 3 | RNVC: 2

24 Oct 1992

5340-66-161-3621
Bumper

661613621
QASM00706-004: RNCC: 3 | RNVC: 2

24 Sep 2013

5340-66-146-0904
Rear Gable

661460904
471 2439-04: RNCC: 3 | RNVC: 2

14 Jan 2000

5340-66-142-4625
Mounting Bracket

661424625
471-90423-103T01: RNCC: 3 | RNVC: 2
511257: RNCC: 3 | RNVC: 2

20 Aug 1996

5340-66-131-6465
Protective Cover

661316465
640/2/30564/002: RNCC: 3 | RNVC: 2

11 Jan 1989

5340-66-143-1156
Pattern Set

661431156
TOOLING FOR 2010-66-037-3398: RNCC: 3 | RNVC: 2

23 May 1997

5340-66-147-9420
Dust And Moisture Seal Protective Cap-Plug

661479420
ADP065: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-66-060-9636
Door Catchset

660609636
H637: RNCC: 3 | RNVC: 2

19 Feb 1974

5340-66-150-2473
Angle Bracket

661502473
NO PRIMARY REF 66-150-2473: RNCC: 3 | RNVC: 2
04677015: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-147-8745
Mounting Bracket

661478745
F/2888-550-029B: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-029B: RNCC: 5 | RNVC: 2

21 Nov 2001

5340-66-073-8356
Thrust- Pad

660738356
MAM16-14: RNCC: 3 | RNVC: 1

3 Oct 1974

5340-66-151-2297
Retainer

661512297
JMS2002-57-2HL: RNCC: 3 | RNVC: 2

15 Oct 2003

5340-66-159-4273
Access Cover

661594273
BMU-A05-2015B01: RNCC: 3 | RNVC: 2
32-CAR-BM118-000 PANEL J: RNCC: 5 | RNVC: 2

11 Jul 2011

5340-66-128-4986
Expansion Plug

661284986
8970363351: RNCC: 3 | RNVC: 2
8970363351: RNCC: 3 | RNVC: 2
9111290830: RNCC: 5 | RNVC: 2
9111290830: RNCC: 5 | RNVC: 2

6 Jan 1988

5340-66-153-2659
Mounting Bracket

661532659
A210 0078-2: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-152-6797
Barrel Nut Retainer

661526797
NALM00273-7: RNCC: 3 | RNVC: 2
NALM00273-7: RNCC: 5 | RNVC: 1

16 Feb 2005

5340-66-150-0228
Swivel Caster

661500228
NO PRIMARY REF 66-150-0228: RNCC: 3 | RNVC: 2
04812906: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-152-6293
Angle Bracket

661526293
MH-A314-0083-01 ANGLE 4: RNCC: 3 | RNVC: 2
MH-A314-0083 ANGLE 4: RNCC: 3 | RNVC: 2

24 Feb 2005

5340-66-144-6471
Retaining Clip

661446471
43-1704-5: RNCC: 3 | RNVC: 2
FYD1704/5: RNCC: 3 | RNVC: 2

11 Feb 1999

5340-66-142-9775
Mounting Plate

661429775
658/2/06650/000: RNCC: 3 | RNVC: 2

5 May 1997

5340-66-108-2766
Barrel Bolt

661082766
576: RNCC: 3 | RNVC: 1

11 Oct 1980

5340-66-150-7603
Rsd Walk On Cover

661507603
BDI 8144: RNCC: 3 | RNVC: 2
BDI 8144: RNCC: 3 | RNVC: 2

11 Jul 2003

5340-66-151-0680
Mounting Bracket

661510680
43977-10: RNCC: 3 | RNVC: 2
LT1101: RNCC: 5 | RNVC: 2
BMA04903: RNCC: 5 | RNVC: 2

1 May 2003

5340-66-129-9440
Clip

661299440
F4061B: RNCC: 3 | RNVC: 2

12 Jun 1987

5340-66-154-8352
Mounting Bracket

661548352
01-0950126: RNCC: 3 | RNVC: 2

14 Sep 2006

5340-66-082-6399
Strap Hinge Leaf

660826399
FWV10405: RNCC: 3 | RNVC: 2

29 Nov 1974

5340-66-155-8637
Mounting Bracket

661558637
DE252480082: RNCC: 3 | RNVC: 2

19 Jun 2007

5340-66-149-0958
Headless Straight Rod

661490958
RF316: RNCC: 3 | RNVC: 2

20 Nov 2002

5340-66-142-4636
Mounting Bracket

661424636
471-90423-170: RNCC: 3 | RNVC: 2
513255: RNCC: 3 | RNVC: 2

20 Aug 1996

5340-66-154-9517
Window Retaining Plate

661549517
0355-002-036: RNCC: 3 | RNVC: 2

18 Oct 2006

5340-66-155-7533
Helical Compression Spring Retainer

661557533
P10032-21: RNCC: 3 | RNVC: 2

21 May 2007

5340-66-157-4465
Mounting Bracket

661574465
MH2149-1090: RNCC: 3 | RNVC: 2
149-1000 ITEM 119: RNCC: 5 | RNVC: 2
21491090: RNCC: 5 | RNVC: 2

25 Nov 2008

5340-66-151-3620
Angle Bracket

661513620
NALM00210-1: RNCC: 3 | RNVC: 2
RAY171000-1: RNCC: 5 | RNVC: 2

8 Oct 2004

5340-66-150-0768
Expansion Shield

661500768
NO PRIMARY REF 66-150-0768: RNCC: 3 | RNVC: 2
01793808: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-149-6057

5340-66-128-6230
Strap And Buckle As

661286230
HYG3782: RNCC: 3 | RNVC: 2

25 Oct 1991

5340-66-139-4481
Mounting Bracket

661394481
640/2/30046/000: RNCC: 3 | RNVC: 2

23 Feb 1995

5340-66-161-2648
Cushioning Pad

661612648
1600-03-0304C1-02: RNCC: 3 | RNVC: 2
QVRL1600030304C102: RNCC: 5 | RNVC: 2

12 Aug 2013

5340-66-154-8588
Mounting Bracket

661548588
DE252320002: RNCC: 3 | RNVC: 2
15009460-01: RNCC: 3 | RNVC: 2

20 Sep 2006

5340-66-155-0971
Mounting Bracket

661550971
PN-000514: RNCC: 3 | RNVC: 2

1 Dec 2006

5340-66-155-3825
Mounting Bracket

661553825
BMA-A0591516-01: RNCC: 3 | RNVC: 2

19 Mar 2007

5340-66-160-7767
Angle Bracket

661607767
61134637-040: RNCC: 3 | RNVC: 2
61134637-040: RNCC: 5 | RNVC: 2

5 Dec 2012

5340-66-138-1810
Mounting Bracket

661381810
TF00544-1: RNCC: 3 | RNVC: 2
TF00544: RNCC: 5 | RNVC: 2

13 Aug 2001

5340-66-014-4886
Retaining Strap

660144886
172G: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-128-5610
Mounting Bracket

661285610
8941298800: RNCC: 3 | RNVC: 2
8941298800: RNCC: 5 | RNVC: 2

4 Aug 1989

5340-66-157-3180
Access Cover

661573180
MM-0080-Z367: RNCC: 3 | RNVC: 2

8 Oct 2008

5340-66-154-6098
Facia Panel Assembl

661546098
008-02000-001: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-66-145-0034
Mounting Bracket

661450034
MH-A613-0001-B3: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-66-156-3559
Quick Release Plunger

661563559
15015884: RNCC: 3 | RNVC: 2

7 Nov 2007

5340-66-155-5621
Manual Control Handle

661555621
471-30020-105: RNCC: 3 | RNVC: 2
514509: RNCC: 5 | RNVC: 2

16 Apr 2007

5340-66-150-8945
Double Angle Bracket

661508945
700305: RNCC: 3 | RNVC: 2
JYG0303: RNCC: 5 | RNVC: 2

26 Sep 2003

5340-66-086-5331
Helicoil

660865331
012-4931-120: RNCC: 3 | RNVC: 2

27 Feb 1975

5340-66-155-3686
Mounting Bracket

661553686
471-40217-203: RNCC: 3 | RNVC: 2
508691: RNCC: 5 | RNVC: 2

14 Mar 2007

5340-66-147-0694
Protective Cover

5340-66-149-5769

5340-66-155-9281
Lock-Release Lever

661559281
471-50809-210T01: RNCC: 3 | RNVC: 2
502645: RNCC: 5 | RNVC: 2

2 Jul 2007

5340-66-161-3776
Quick Release Plunger

661613776
RET-6262T9: RNCC: 3 | RNVC: 2
RET-6262T9: RNCC: 5 | RNVC: 2

2 Oct 2013

5340-66-157-4453
Mounting Plate

661574453
V01-06-01-01-00: RNCC: 3 | RNVC: 2

25 Nov 2008

5340-66-145-9500
Spacer

661459500
F/2888-520-001-35: RNCC: 3 | RNVC: 2
Q EDE F/2888-520-001-35: RNCC: 5 | RNVC: 2

16 Oct 2001

5340-66-159-5926
Bumper

661595926
A1-21560-230/4: RNCC: 3 | RNVC: 2

19 Oct 2011

5340-66-147-7451
Stretch Velcro Stri

661477451
DU-011-A: RNCC: 3 | RNVC: 2
DU-011-A: RNCC: 5 | RNVC: 2

2 Aug 2001

5340-66-148-5051
Metal Grille

661485051
OED-1749-18-25: RNCC: 3 | RNVC: 2

20 May 2002

5340-66-158-5933
Angle Bracket

661585933
1728-BH-1006-01: RNCC: 3 | RNVC: 2

7 Apr 2010

5340-66-150-4146
Screw Thread Insert And Tool Assortment

661504146
NO PRIMARY REF 66-150-4146: RNCC: 3 | RNVC: 2
06462309: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-157-1468
Drive Flange

661571468
AG-A0206: RNCC: 3 | RNVC: 2

14 Aug 2008

Load More Results