What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is a Hasp Staple?

A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

Hardware, Commercial - Australia (AU)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Australia (AU) - NCB is 66

Page 25 of 29

NSN Format for Hardware, Commercial
Codified by Australia

53	40	66	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Australia (AU)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 53 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 78 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 109 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 25 Items
Holder,Spring 26 Items
What is a Compression Cup? 11 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 43 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 85 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 54 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 27 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 249 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 36 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 87 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 39 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 11 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 16 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 15 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Rim Latch? 18 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Rim Lock? 13 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 12 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 17 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 17 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 18 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 103 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 11 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 59 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 14 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 14 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Plug Button? 12 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Corrosion Preventive Anode? 27 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 78 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 268 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 88 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 70 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 36 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 40 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 41 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Plain Solid Disk? 41 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 12 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 608 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 57 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 54 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 317 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 48 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 40 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 83 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Quick Release Plunger? 17 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 65 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 24 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 14 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 22 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 49 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 19 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 151 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 15 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 444 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 128 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 42 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 53 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 25 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 201 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 33 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 133 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 42 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 54 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Strapping? 28 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 75 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Screw Thread Insert And Tool Assortment? 18 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 28 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 18 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 740 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 11 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 14 Items
What is an Antipilferage Seal? 27 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 129 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Seal Retaining Plate? 29 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 47 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1862 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 15 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 11 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 10 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 766 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 27 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 65 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 79 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 71 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 22 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 12 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 14 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 35 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 50 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 28 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 15 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 20 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 11 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 83 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 138 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 393 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 38 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 11 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 22 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
What is a Key Blank? 22 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 10 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 114 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 11 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 20 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 12 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is a Bumper? 74 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 25 of 29

5340-66-148-3251
Mounting Bracket

661483251
5003 510 031: RNCC: 3 | RNVC: 2
QEDE 5003 510 031: RNCC: 5 | RNVC: 2

17 Jul 2002

5340-66-161-0480
Access Cover

661610480
RP874: RNCC: 3 | RNVC: 2

2 May 2013

5340-66-159-4979
Antipilferage Seal

661594979
BA07714: RNCC: 3 | RNVC: 2

15 Aug 2011

5340-66-146-4037
Dust And Moisture Seal Protective Cap

661464037
DCR-04-A-08-3A: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

8 May 2000

5340-66-156-7663
Door Holder

661567663
320/12-R: RNCC: 3 | RNVC: 2

26 Mar 2008

5340-66-150-7848
Multiple Angle Bracket

661507848
LTA-A10-003-001: RNCC: 3 | RNVC: 2

3 Apr 2003

5340-66-161-2807
Webbing Strap

661612807
10006014-130: RNCC: 3 | RNVC: 2

20 Aug 2013

5340-66-142-8873
Webbing Strap

661428873
43-0054-4: RNCC: 3 | RNVC: 2
43-0054-4: RNCC: 3 | RNVC: 2

22 Jan 1997

5340-66-135-6311
Loop Clamp

661356311
N313-25: RNCC: 3 | RNVC: 2
946.31.05.112: RNCC: 5 | RNVC: 2

11 Nov 1991

5340-66-161-1731
Access Cover

661611731
15018240-G: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-66-153-4392
Mounting Plate

661534392
DE252190041: RNCC: 3 | RNVC: 2

19 Aug 2005

5340-66-093-9313
Spring Tension Clip

660939313
MAM7-502FF: RNCC: 3 | RNVC: 2

30 Jan 1977

5340-66-143-3625
Front Cover

661433625
142358: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-66-128-6369
Manual Control Lever

661286369
HYG3937: RNCC: 3 | RNVC: 2

12 Mar 1992

5340-66-160-4935
Mounting Plate

661604935
BMP-A05-3025-02: RNCC: 3 | RNVC: 2

21 Aug 2012

5340-66-151-4239
Angle Bracket

661514239
WMS5708-135001: RNCC: 3 | RNVC: 2
WMS5708-135001: RNCC: 3 | RNVC: 2

27 Aug 2003

5340-66-140-5213
Spring Thumb Catch

661405213
A3-20-412-12: RNCC: 3 | RNVC: 2

22 Feb 1995

5340-66-155-5993
Multiple Angle Bracket

661555993
471-90079-102: RNCC: 3 | RNVC: 2
523704: RNCC: 5 | RNVC: 2

23 Apr 2007

5340-66-155-2473
Female Mounts

661552473
DI-0028-MI: RNCC: 3 | RNVC: 2

5 Feb 2007

5340-66-159-1743
Butt Hinge

661591743
15017950: RNCC: 3 | RNVC: 2

22 Mar 2011

5340-66-141-4930
Angle Bracket

661414930
004-176: RNCC: 3 | RNVC: 2

13 Apr 1996

5340-66-093-9314
Spring Tension Clip

660939314
MAM7-502GG: RNCC: 3 | RNVC: 2

30 Jan 1977

5340-66-146-3941
Enclosure

661463941
73271-2-08: RNCC: 3 | RNVC: 2

4 May 2000

5340-66-143-5569
Section Block Clamp

661435569
471-60803-123: RNCC: 3 | RNVC: 2
504080: RNCC: 3 | RNVC: 2

19 Sep 1997

5340-66-154-6166
Runner

661546166
471-50806-109: RNCC: 3 | RNVC: 2
509417: RNCC: 5 | RNVC: 2

25 Jul 2006

5340-66-143-5700
Access Cover

661435700
AN 4346 3001-1: RNCC: 3 | RNVC: 2

10 Sep 1997

5340-66-153-3831
Handle Grip

661533831
5433834070: RNCC: 3 | RNVC: 2
5433834070: RNCC: 5 | RNVC: 2

4 Aug 2005

5340-66-159-0847
Mounting Bracket

661590847
471-RH000-114-T05: RNCC: 3 | RNVC: 2
1730162: RNCC: 5 | RNVC: 2

2 Feb 2011

5340-66-142-8421
Rod End Clevis

661428421
W2-89-PC7: RNCC: 3 | RNVC: 2

17 Feb 1997

5340-66-159-1557
Loop Clamp

661591557
EN4113S22WR: RNCC: 3 | RNVC: 2

15 Mar 2011

5340-66-154-8703
Mounting Bracket

661548703
15011724: RNCC: 3 | RNVC: 2

25 Sep 2006

5340-66-146-4040
Dust And Moisture Seal Protective Cap

661464040
DCR-04-A-14-3A: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

8 May 2000

5340-66-147-2374
Angle Bracket

661472374
A00007-00571-C-0026/23: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-66-024-3010
Webbing Strap

660243010
ADE(W)21-63: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-152-1793
Mounting Bracket

661521793
DTSA3TR: RNCC: 3 | RNVC: 2
MLC-0454: RNCC: 5 | RNVC: 2

14 Aug 2004

5340-66-157-5201
Mounting Bracket

661575201
V0507-CE-0002: RNCC: 3 | RNVC: 2

9 Dec 2008

5340-66-150-4138
Screw Thread Insert And Tool Assortment

661504138
NO PRIMARY REF 66-150-4138: RNCC: 3 | RNVC: 2
06578604: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-159-0335
Mounting Bracket

661590335
1008W075-002: RNCC: 3 | RNVC: 2

14 Dec 2010

5340-66-151-3657
Bow Handle

661513657
NALM00159-9: RNCC: 3 | RNVC: 2

3 Nov 2004

5340-66-090-2085
Spacing Threaded Standoff

660902085
H2236: RNCC: 3 | RNVC: 2

23 Jan 1972

5340-66-158-0145
Mounting Plate

661580145
15016892: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-66-072-2953

5340-66-146-1368
Mounting Bracket

661461368
TYPE 1V(02)(STBDFWD): RNCC: 3 | RNVC: 2

27 Jan 2000

5340-66-032-1455
Electrical-Mec Post

660321455
ADE(W)67-1102 ISSUE 2: RNCC: 3 | RNVC: 2

17 May 1969

5340-66-145-2765
Upper Housing And S

661452765
00-289004-00001: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-66-160-9497
Retaining Strap

661609497
BMD-A26-0037-01: RNCC: 3 | RNVC: 2

21 Mar 2013

5340-66-150-5810
Key Holder

661505810
NO PRIMARY REF 66-150-5810: RNCC: 3 | RNVC: 2
04068608: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-143-3806
Locating Pin

661433806
PGM-E-44-33: RNCC: 3 | RNVC: 2

21 Apr 1998

5340-66-156-7202
Bumper

661567202
BMF-A05-1591-01: RNCC: 3 | RNVC: 2

7 Mar 2008

5340-66-055-5823
Padlock

660555823
232: RNCC: 3 | RNVC: 2
ARMY(AUST)6504: RNCC: 4 | RNVC: 1

23 Jan 1973

5340-66-154-8982
Angle Bracket

661548982
15013517: RNCC: 3 | RNVC: 2

3 Oct 2006

5340-66-155-6552
Mounting Plate

661556552
534.53.09.020: RNCC: 3 | RNVC: 2

2 May 2007

5340-66-096-5213
Folding Hinge

660965213
ADE(W)121-21: RNCC: 3 | RNVC: 2

21 Apr 1978

5340-66-139-8292
General Purpose Resilient Mount

661398292
GB530-NR3.5-M20-FM-0: RNCC: 3 | RNVC: 2
WD1428/15: RNCC: 3 | RNVC: 2

29 Aug 1994

5340-66-156-3728
Webbing Strap

661563728
10006014: RNCC: 3 | RNVC: 1

13 Nov 2007

5340-66-156-1685
Clamping Catch

661561685
1201284: RNCC: 3 | RNVC: 2

13 Sep 2007

5340-66-142-8227
Mounting Bracket

661428227
658/2/05281/000: RNCC: 3 | RNVC: 2

28 Jan 1997

5340-66-150-5603
Earmuff Hygiene Kit

661505603
NO PRIMARY REF 66-150-5603: RNCC: 3 | RNVC: 2
02334114: RNCC: 5 | RNVC: 2

16 Apr 2003

5340-66-120-6743
Fwd. Hinge Half

661206743
12S1796-11-114: RNCC: 3 | RNVC: 2

13 Oct 1986

5340-66-150-5052
Mounting Bracket

661505052
NO PRIMARY REF 66-150-5052: RNCC: 3 | RNVC: 2
00997176: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-155-4174
Mounting Bracket

661554174
203-01-71270: RNCC: 3 | RNVC: 2
203-01-71270: RNCC: 5 | RNVC: 2

23 Mar 2007

5340-66-154-5601
Ess Facia Assembly

661545601
008-02063-001: RNCC: 3 | RNVC: 2

6 Jul 2006

5340-66-137-2739
General Purpose Resilient Mount

661372739
P471-90200-104-T01: RNCC: 3 | RNVC: 2

27 Oct 1992

5340-66-119-4954
An Colletted Sleeve

661194954
664-00002: RNCC: 3 | RNVC: 2

24 Nov 1983

5340-66-153-9610
Mounting Bracket

661539610
DE251820050: RNCC: 3 | RNVC: 2

4 Jan 2006

5340-66-139-0097
Angle Bracket

661390097
BYG2147: RNCC: 3 | RNVC: 2

29 Apr 1994

5340-66-024-1181
Handle Grip

660241181
1086: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-154-2782
Mounting Bracket

661542782
BMA-A05-1466-01: RNCC: 3 | RNVC: 2

11 Apr 2006

5340-66-140-5669
Ha Bracket Assembly

661405669
004-224-02: RNCC: 3 | RNVC: 2

12 May 1995

5340-66-088-4907
Hinged Hasp

660884907
C372CAD9IN: RNCC: 3 | RNVC: 2

1 Feb 1976

5340-66-155-8896
Angle Bracket

661558896
X50RC375M: RNCC: 3 | RNVC: 2

25 Jun 2007

5340-66-158-9700
Mounting Bracket

661589700
0110217800400: RNCC: 3 | RNVC: 2
1722633: RNCC: 5 | RNVC: 2

11 Nov 2010

5340-66-156-5691
Mounting Bracket

661565691
ARLM0790: RNCC: 3 | RNVC: 2

21 Jan 2008

5340-66-013-8711
Strap Fastener Loop

660138711
5340-049: RNCC: 3 | RNVC: 1
MGO(M)494 ITEM 2: RNCC: 3 | RNVC: 2
DEF(AUST)2010: RNCC: 4 | RNVC: 1

1 Jan 1968

5340-66-151-6951
Mounting Bracket

661516951
LTA-A05-270-001: RNCC: 3 | RNVC: 2

28 Aug 2003

5340-66-147-2682
Af Pushbutton Cover

661472682
1592816: RNCC: 3 | RNVC: 2
A00005-00437-C-0013: RNCC: 3 | RNVC: 2
A21862: RNCC: 3 | RNVC: 2

15 Dec 2000

5340-66-152-0212
Mounting Bracket

661520212
BMA-A05-1299: RNCC: 3 | RNVC: 2

14 Sep 2004

5340-66-144-5994
General Purpose Access Door

661445994
A00007-00167-C0001: RNCC: 3 | RNVC: 2
A20374: RNCC: 3 | RNVC: 2

5 Jan 1999

5340-66-097-7743
Detent Plunger

660977743
TMGB252: RNCC: 3 | RNVC: 2

14 May 1978

5340-66-138-9753
Plate

661389753
YA4355840410: RNCC: 3 | RNVC: 2

21 Dec 1993

5340-66-010-5668
Mounting Bracket

660105668
TSE(V)102-29: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-146-6947
Fire Damper

661466947
MSD-MO-SB-450-220-250-SS: RNCC: 3 | RNVC: 2

9 Aug 2000

5340-66-136-9337
Mounting Plate

661369337
15-0578-01: RNCC: 3 | RNVC: 2

11 Jul 1992

5340-66-146-2057
Mounting Bracket

661462057
487 0109-23: RNCC: 3 | RNVC: 2

14 Feb 2000

5340-66-156-5400
Mounting Plate

661565400
31-80-00618-00: RNCC: 3 | RNVC: 2

8 Jan 2008

5340-66-148-2288
Jack Hydra Adapter

661482288
BMA-A60-0028-01/S: RNCC: 3 | RNVC: 2

4 Mar 2002

5340-66-159-4220
Angle Bracket

661594220
A97-DWG-000009-1: RNCC: 3 | RNVC: 2

8 Jul 2011

5340-66-031-5616
Bail Handle

660315616
ADE(W)67-1659 ISSUE 2: RNCC: 3 | RNVC: 2

18 Apr 1969

5340-66-106-0169
Strap End Clip

5340-66-158-7726
Mounting Plate

661587726
BMA-A05-0650-01: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-66-124-9530
General Purpose Resilient Mount

661249530
M503-27796-55: RNCC: 3 | RNVC: 2

13 Mar 1986

5340-66-044-7073
Rim Latch

660447073
R116A: RNCC: 3 | RNVC: 2

27 Sep 1971

5340-66-155-8784
Mounting Bracket

661558784
471-50820-117: RNCC: 3 | RNVC: 2
506209: RNCC: 5 | RNVC: 2

22 Jun 2007

5340-66-156-2569
Mounting Bracket

661562569
15010934: RNCC: 3 | RNVC: 2

9 Oct 2007

5340-66-157-4449
Mounting Bracket

661574449
V02-01-07-02-04: RNCC: 3 | RNVC: 2

25 Nov 2008

5340-66-150-0373
Barrel Bolt

661500373
NO PRIMARY REF 66-150-0373: RNCC: 3 | RNVC: 2
04048709: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-139-6358
Helical Compression Spring Retainer

661396358
56W4-S105 PC17: RNCC: 3 | RNVC: 1
56W4-S104 PC17: RNCC: 3 | RNVC: 2

13 Jul 1994

5340-66-142-9047
Mounting Bracket

661429047
658/2/05787/002: RNCC: 3 | RNVC: 2

10 Feb 1997

5340-66-128-6831
Access Cover

661286831
DE620030011: RNCC: 3 | RNVC: 2

29 Jun 1993

5340-66-160-8370
Cushioning Pad

661608370
WSH1075312: RNCC: 3 | RNVC: 2

24 Jan 2013

5340-66-139-0661
Mounting Plate

661390661
YA4355840151: RNCC: 3 | RNVC: 2

18 Feb 1994

5340-66-159-8158
Block Clamp

661598158
BMA-A10-0144-01: RNCC: 3 | RNVC: 2

22 Feb 2012

5340-66-144-2169
Slip Joint

661442169
MH-M671-0001-A5: RNCC: 3 | RNVC: 2

14 Jul 2000

5340-66-152-6832
Dust And Moisture Seal Protective Cover

661526832
NALM00047-1: RNCC: 3 | RNVC: 2
NALM00047-1: RNCC: 5 | RNVC: 1

20 May 2005

5340-66-143-7301
Handwheel

661437301
B831A534/17: RNCC: 3 | RNVC: 2

8 Jul 1997

5340-66-149-7047
Padlock

661497047
NO PRIMARY REF 66-149-7047: RNCC: 3 | RNVC: 2
3380984: RNCC: 5 | RNVC: 2

8 Apr 2003

5340-66-146-6944
Fire Damper

661466944
MSD-MO-SB-540-160-250-SS: RNCC: 3 | RNVC: 2

9 Aug 2000

5340-66-154-3472
General Purpose Resilient Mount

661543472
G10-6015: RNCC: 3 | RNVC: 2

2 May 2006

5340-66-150-0213
Rigid Caster

661500213
NO PRIMARY REF 66-150-0213: RNCC: 3 | RNVC: 2
04236052: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-150-4137
Screw Thread Insert And Tool Assortment

661504137
NO PRIMARY REF 66-150-4137: RNCC: 3 | RNVC: 2
05557105: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-150-0630
Padlock

661500630
NO PRIMARY REF 66-150-0630: RNCC: 3 | RNVC: 2
03381494: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-142-8891
Webbing Strap

661428891
43-0054-5: RNCC: 3 | RNVC: 2
43-0054-5: RNCC: 3 | RNVC: 2

22 Jan 1997

5340-66-014-3837
Swivel Caster

660143837
L410: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-133-6343
Manual Control Handle

661336343
V0H200-3: RNCC: 3 | RNVC: 2

8 Feb 1990

5340-66-060-0437
Headle Straight Rod

5340-66-146-3654

5340-66-058-5872
Windshield Bracket

5340-66-160-3244
Mounting Bracket

661603244
BP5685803: RNCC: 3 | RNVC: 2

7 Jun 2012

5340-66-155-7329
Mounting Plate

661557329
X50QE374M: RNCC: 3 | RNVC: 2

16 May 2007

5340-66-145-5202
Condenser Disc Kit

661455202
80270: RNCC: 3 | RNVC: 2

14 Oct 1999

5340-66-159-1164
Runner

661591164
2991.22: RNCC: 3 | RNVC: 2

24 Feb 2011

5340-66-145-6811
Mounting Bracket

661456811
A55-997-B2035-0A00: RNCC: 3 | RNVC: 2

9 Dec 1999

5340-66-128-6750
Mechanic Equipment Hardware Kit

661286750
122561-1: RNCC: 3 | RNVC: 2

6 Jan 1994

5340-66-154-0822
Mounting Plate

661540822
1626919-1: RNCC: 3 | RNVC: 2

17 Feb 2006

5340-66-147-2603
Housing

661472603
DAS1610: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-66-141-7523
Helical Compression Spring Seat

661417523
FE1201-040004: RNCC: 3 | RNVC: 2

2 Jan 1996

5340-66-148-9446
General Purpose Access Door

661489446
12755520: RNCC: 3 | RNVC: 2

18 Mar 2003

5340-66-145-8442
Reduction Hub Plate

661458442
869.013.00: RNCC: 3 | RNVC: 2

3 Dec 1999

5340-66-147-3971
Panel Moulding Trim

661473971
0545347001: RNCC: 3 | RNVC: 2

23 Apr 2001

5340-66-147-2575
Side Plate

661472575
DAG62P: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-66-143-4303
Drain Tray

661434303
492474: RNCC: 3 | RNVC: 2

27 Apr 1998

5340-66-142-9822
Retaining Band

661429822
HXF1008: RNCC: 3 | RNVC: 2
999/4/42556/126: RNCC: 3 | RNVC: 2

20 May 1997

5340-66-151-0623
Multiple Angle Bracket

661510623
LTA-A05-117-001: RNCC: 3 | RNVC: 2

24 Apr 2003

5340-66-135-2984
Nut And Bolt Locking Plate

661352984
DE(EMEI)121-8: RNCC: 3 | RNVC: 2

18 Feb 1992

5340-66-152-3787
Assembly Clip Plate

661523787
DE250900068: RNCC: 3 | RNVC: 2

14 Oct 2004

5340-66-152-1809
Strap Hinge

661521809
4311-0061: RNCC: 3 | RNVC: 2
4311-0061: RNCC: 5 | RNVC: 2
HING105: RNCC: 5 | RNVC: 2

20 Apr 2004

5340-66-148-1998
Buckle

661481998
BB: RNCC: 3 | RNVC: 2

14 Feb 2002

5340-66-154-9610
Rod End Clevis

661549610
ARLM0852-03: RNCC: 3 | RNVC: 2

24 Oct 2006

5340-66-156-0214
Mounting Bracket

661560214
ARLM0620-1: RNCC: 3 | RNVC: 2

25 Jul 2007

5340-66-130-9745
Extension Drawer Slide

661309745
371111020216/3: RNCC: 3 | RNVC: 2
371111020216: RNCC: 5 | RNVC: 1

5 Oct 1988

5340-66-137-0043
Dus Protective Plug

5340-66-143-6065
Angle Bracket

661436065
II: RNCC: 3 | RNVC: 2
TYPE II: RNCC: 5 | RNVC: 2

2 Oct 1997

5340-66-147-8328
Mounting Plate

661478328
ATS135033: RNCC: 3 | RNVC: 2

21 Sep 2001

5340-66-088-4919
Resilient Mo Sleeve

660884919
13-262100: RNCC: 3 | RNVC: 2

1 Feb 1976

5340-66-157-2755
Angle Bracket

661572755
11MK29401M: RNCC: 3 | RNVC: 2

23 Sep 2008

5340-66-155-5658
Spacing Threaded Standoff

661555658
471-90429-102: RNCC: 3 | RNVC: 2
502019: RNCC: 5 | RNVC: 2

16 Apr 2007

5340-66-028-3061
Antipilferage Seal

660283061
66-028-3061: RNCC: 3 | RNVC: 9

1 Jan 1968

5340-66-161-2657
Cushioning Pad

661612657
1600-03-0305C1-04: RNCC: 3 | RNVC: 2
QVRL1600030305C104: RNCC: 5 | RNVC: 2

12 Aug 2013

5340-66-138-8231
General Purpose Resilient Mount

661388231
196640-05460: RNCC: 3 | RNVC: 2

21 Apr 1994

5340-66-119-4951
An Colletted Sleeve

661194951
664-00025: RNCC: 3 | RNVC: 2

24 Nov 1983

5340-66-082-9995
Helicoil Insert

660829995
20-98174559: RNCC: 3 | RNVC: 2

24 Jan 1975

5340-66-142-4630
Mounting Bracket

661424630
471-90423-103T06: RNCC: 3 | RNVC: 2
516829: RNCC: 3 | RNVC: 2

20 Aug 1996

5340-66-136-0629
Mounting Bracket

661360629
26-08180: RNCC: 3 | RNVC: 2
A011538 SHEET 32: RNCC: 3 | RNVC: 2

28 Mar 1992

5340-66-159-2851
Corrosion Preventive Anode

661592851
CDZ1-66-1: RNCC: 3 | RNVC: 2

20 May 2011

5340-66-137-2744
Locking Assembly

661372744
840629-1-A35-B32-C4/2343: RNCC: 3 | RNVC: 2

24 Oct 1992

5340-66-153-8175
Mounting Bracket

661538175
838829-0: RNCC: 3 | RNVC: 2
838829-0: RNCC: 5 | RNVC: 2
838829-0: RNCC: 5 | RNVC: 2

10 Nov 2005

5340-66-154-8507
Blank Panel

661548507
15010478-02: RNCC: 3 | RNVC: 2

19 Sep 2006

5340-66-141-1962
Mounting Bracket

661411962
352071: RNCC: 3 | RNVC: 2
352071: RNCC: 3 | RNVC: 2
352071: RNCC: 3 | RNVC: 2

16 Oct 1995

5340-66-140-3910
Snap Hook

661403910
RF6310: RNCC: 3 | RNVC: 2
RF948: RNCC: 5 | RNVC: 9

21 Mar 1995

5340-66-146-0892
Gable

661460892
438 4155-01: RNCC: 3 | RNVC: 2

13 Jan 2000

5340-66-156-1816
Fork Pin

661561816
FRP-001: RNCC: 3 | RNVC: 2

18 Sep 2007

5340-66-143-3953
Mounting Plate

661433953
492048: RNCC: 3 | RNVC: 2

23 Apr 1998

5340-66-148-6049
Block Clamp

661486049
306118: RNCC: 3 | RNVC: 2
306118: RNCC: 5 | RNVC: 2

11 Mar 2003

5340-66-118-7788
Rod Adjustment

661187788
001-17351: RNCC: 3 | RNVC: 2

2 Sep 1983

5340-66-128-5472
Fuel Cut O Bracket

661285472
8943378560: RNCC: 3 | RNVC: 2
8943378560: RNCC: 5 | RNVC: 2

24 Jul 1989

5340-66-141-4306
Slide Track Support

661414306
004-069-2: RNCC: 3 | RNVC: 2

27 Mar 1996

5340-66-147-8621
Mounting Plate

661478621
F/2888-550-029E: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-029E: RNCC: 5 | RNVC: 2

27 Sep 2001

5340-66-159-1081
Angle Bracket

661591081
532.30.09.115: RNCC: 3 | RNVC: 2

21 Feb 2011

5340-66-153-9617
General Purpose Access Door

661539617
AD40-10-03.00 / ITEM: 4: RNCC: 3 | RNVC: 2

4 Jan 2006

5340-66-157-6150
Mounting Bracket

661576150
AM07013-5: RNCC: 3 | RNVC: 2

21 Jan 2009

5340-66-149-1693
Webbing Strap

661491693
438R/D: RNCC: 3 | RNVC: 2

28 Jan 2003

5340-66-088-2267
Grooved Clamp Coupling Ferrule

660882267
1213-67126: RNCC: 3 | RNVC: 2

24 Aug 1975

5340-66-088-4526
Retaining Strap

660884526
1213-5591015: RNCC: 3 | RNVC: 2

11 May 1975

5340-66-138-9360
Mounting Bracket

661389360
AA5649ALH: RNCC: 3 | RNVC: 2
FADDTAA5649ALH: RNCC: 3 | RNVC: 2

2 Nov 1993

5340-66-157-4913
Mortise Lock Set

661574913
35791SC: RNCC: 3 | RNVC: 2

1 Dec 2008

5340-66-139-3620
Spring Tension Clip

661393620
999/9/38075/000: RNCC: 3 | RNVC: 2

27 Sep 1994

5340-66-128-5977
Spring Loaded Cylinder Fastener

661285977
HYL9730: RNCC: 3 | RNVC: 2
71-575: RNCC: 5 | RNVC: 2

4 Oct 1990

5340-66-156-0128
Leakproof Seal Plug

661560128
RC40-DA ITEM33: RNCC: 3 | RNVC: 2

24 Jul 2007

5340-66-158-6528
Electronic Equipment Hardware Kit

661586528
TW-FPSWB: RNCC: 3 | RNVC: 2

12 May 2010

5340-66-117-1414
Flush Door Ring

661171414
FLUSH RING: RNCC: 3 | RNVC: 2

14 Jun 1983

5340-66-147-3975
Dirt And Liquid Deflector

661473975
0581300008: RNCC: 3 | RNVC: 2

23 Apr 2001

5340-66-148-2476
Sheave Assembly

661482476
2888-570-003E: RNCC: 3 | RNVC: 2
Q EDE 2888-570-003E: RNCC: 5 | RNVC: 2

18 Apr 2002

5340-66-147-6572
Webbing Strap

661476572
DT85049-G341/5: RNCC: 3 | RNVC: 2
FLSP-4000: RNCC: 3 | RNVC: 2
DT85049-G341/5: RNCC: 5 | RNVC: 2

30 Oct 2001

5340-66-097-7750
Plate Assembly

660977750
ADE(V)50-34: RNCC: 3 | RNVC: 2
ADE(V)50-34: RNCC: 3 | RNVC: 2

14 May 1978

5340-66-125-4480
Snap Hook

661254480
88055/24: RNCC: 3 | RNVC: 2

21 Apr 1986

5340-66-055-2852
Hand Crank

660552852
C501915: RNCC: 3 | RNVC: 2

30 Jul 1975

5340-66-146-3793
Outer Panel-Door

661463793
014301: RNCC: 3 | RNVC: 2

19 Apr 2000

5340-66-148-5535
Hydrobo Tap Nut Kit

661485535
90505: RNCC: 3 | RNVC: 2

12 Jul 2002

5340-66-155-8931
Wire Guide

661558931
471-60801-149: RNCC: 3 | RNVC: 2
506724: RNCC: 5 | RNVC: 2

26 Jun 2007

5340-66-090-7386
Nonmetallic Bumper

5340-66-155-0115
Mounting Bracket

661550115
AS 1204: RNCC: 3 | RNVC: 1
BYG2095: RNCC: 3 | RNVC: 2

8 Nov 2006

5340-66-147-4161
Sealing Clamp Latch

661474161
F/2888-550-024L: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-024L: RNCC: 5 | RNVC: 2

4 May 2001

5340-66-131-4583
Angle Bracket

661314583
3252119R1: RNCC: 3 | RNVC: 2

5 Nov 1988

5340-66-104-2017
Angle Bracket

661042017
DE420030016: RNCC: 3 | RNVC: 2

31 Jul 1971

5340-66-160-2521
Block Clamp

661602521
RCS-22: RNCC: 3 | RNVC: 2
RCS-22: RNCC: 5 | RNVC: 2

9 May 2012

5340-66-130-5120
Mounting Bracket

661305120
DE(EMEI)69-2: RNCC: 3 | RNVC: 2

2 Aug 1988

5340-66-155-4719
Pipe Clamp

661554719
196630-11270: RNCC: 3 | RNVC: 2

29 Mar 2007

5340-66-157-3177
General Purpose Access Door

661573177
MM-0080-T071: RNCC: 3 | RNVC: 2

8 Oct 2008

5340-66-146-1989
Access Cover

661461989
472 8041-01: RNCC: 3 | RNVC: 2

10 Feb 2000

5340-66-160-8407
Clamping Catch

661608407
1138.21-P3: RNCC: 3 | RNVC: 2

31 Jan 2013

5340-66-153-2751
Mounting Bracket

661532751
A210 0104-2: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-152-4896
T Plate

661524896
DE251680010: RNCC: 3 | RNVC: 2

9 Feb 2005

5340-66-155-9013
Retaining Plate

661559013
P471-90800-100: RNCC: 3 | RNVC: 2
502694: RNCC: 5 | RNVC: 2

26 Jun 2007

5340-66-147-8600
Middle Guide Tube

661478600
F/2888-570-007A: RNCC: 3 | RNVC: 2
Q EDE F/2888-570-007A: RNCC: 5 | RNVC: 2

26 Sep 2001

5340-66-080-8825
Angle Bracket

660808825
19A6961: RNCC: 3 | RNVC: 2

26 Sep 1974

5340-66-143-3289
General Purpose Resilient Mount

661433289
322110: RNCC: 3 | RNVC: 2

20 Apr 1998

5340-66-128-4036
Dust And Moisture Seal Boot

661284036
N8819: RNCC: 3 | RNVC: 2

21 May 1987

5340-66-150-8223
Locking Pin

661508223
BDI 8218: RNCC: 3 | RNVC: 2
BDI 8218: RNCC: 3 | RNVC: 2

18 Aug 2003

5340-66-151-5899
Extension Handle

661515899
LTA-A60-0010-01: RNCC: 3 | RNVC: 2

12 Aug 2003

5340-66-150-3942
Butt Hinge

661503942
NO PRIMARY REF 66-150-3942: RNCC: 3 | RNVC: 2
06563619: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-106-4031
Handwheel Stop

661064031
C0005-17: RNCC: 3 | RNVC: 2

14 Jul 1980

5340-66-134-9030
Clamp Bracket

661349030
675/1/34669/000: RNCC: 3 | RNVC: 2

20 Sep 1990

5340-66-155-5788
Angle Bracket

661555788
X50RU36D-P4: RNCC: 3 | RNVC: 2

18 Apr 2007

5340-66-128-5508
Spring Tension Clip

661285508
10607661: RNCC: 3 | RNVC: 2
MYH3386: RNCC: 3 | RNVC: 2
BMA23494: RNCC: 5 | RNVC: 2

26 Jul 1989

5340-66-141-4573
T Plate

661414573
1641-636: RNCC: 3 | RNVC: 2
DE230300005: RNCC: 3 | RNVC: 2

26 Mar 1996

5340-66-155-1262
Seal Retaining Plate

661551262
1414-11-04: RNCC: 3 | RNVC: 2

11 Dec 2006

5340-66-126-0820
Hinged Hasp

661260820
200-41: RNCC: 3 | RNVC: 2

17 Sep 1990

5340-66-124-7880
Dust And Moisture Seal Protective Cap

661247880
5-381599: RNCC: 3 | RNVC: 2

22 Nov 1985

5340-66-154-6825
Access Cover

661546825
VTR251-2TSUB14F4T19-7IIINM40W3P-: RNCC: 3 | RNVC: 1

11 Aug 2006

5340-66-155-3642
Support Ring

661553642
471-20211-101: RNCC: 3 | RNVC: 2
507906: RNCC: 5 | RNVC: 2

13 Mar 2007

5340-66-158-7644
Mounting Bracket

661587644
BMA-A08-0328-01: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-66-127-9892
Mounting Plate

661279892
631-5761-001: RNCC: 3 | RNVC: 2

28 Mar 1996

5340-66-145-4334
Mounting Bracket

661454334
608/2/57992/002: RNCC: 3 | RNVC: 2

16 Sep 1999

5340-66-139-2048
Access Cover

661392048
82RU136P4: RNCC: 3 | RNVC: 2
82RU136P3: RNCC: 5 | RNVC: 2
0050-82-001-3603: RNCC: C | RNVC: 1

27 May 1994

5340-66-150-2031
Support Hook

661502031
NO PRIMARY REF 66-150-2031: RNCC: 3 | RNVC: 2
01659308: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-088-5374
Transmitter Mountin

660885374
2M4-94-22: RNCC: 3 | RNVC: 2

27 Jun 1975

5340-66-150-3927
Butt Hinge

661503927
NO PRIMARY REF 66-150-3927: RNCC: 3 | RNVC: 2
04081805: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-154-0744
Butt Hinge

661540744
BMA-A05-1677-01: RNCC: 3 | RNVC: 2

14 Feb 2006

5340-66-150-3721
Spring Tension Clip

661503721
NO PRIMARY REF 66-150-3721: RNCC: 3 | RNVC: 2
06601610: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-147-7822
Access Cover

661477822
F/2888-520-019E: RNCC: 3 | RNVC: 2
Q EDE F/2888-520-019E: RNCC: 5 | RNVC: 2

19 Sep 2001

5340-66-139-2347
Access Cover

661392347
704/2/11527: RNCC: 3 | RNVC: 2

4 Aug 1994

5340-66-151-6894
Escutcheon Plate

661516894
90536: RNCC: 3 | RNVC: 2

12 Nov 2003

5340-66-161-0777
Webbing Strap

661610777
FA 840 C-4V: RNCC: 3 | RNVC: 2
K29-18669-07: RNCC: 5 | RNVC: 1

22 May 2013

5340-66-147-2499
O-Ring Flange

661472499
008/345/GMOWS.3030.2.01: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-66-143-3073
Dust And Moisture Seal Protective Cap

661433073
U1024: RNCC: 3 | RNVC: 2
6 415 394: RNCC: 5 | RNVC: 2

2 Apr 1998

5340-66-155-8133
Access Cover

661558133
BMA-A05-1240: RNCC: 3 | RNVC: 2

6 Jun 2007

5340-66-155-1530
Caster Frame

661551530
471-50809-172: RNCC: 3 | RNVC: 2
502607: RNCC: 5 | RNVC: 2

18 Dec 2006

5340-66-156-3295
Mounting Plate

661563295
BMA-A05-1745-01: RNCC: 3 | RNVC: 2

31 Oct 2007

5340-66-158-8421
Mounting Bracket

661588421
BMS-A26-0132-01: RNCC: 3 | RNVC: 2
BMA-A26-0132: RNCC: 5 | RNVC: 2

23 Aug 2010

5340-66-160-9201
Mounting Bracket

661609201
15013484-10: RNCC: 3 | RNVC: 2

6 Mar 2013

5340-66-148-2289
Extension Handle

661482289
BMA25133/S: RNCC: 3 | RNVC: 2

4 Mar 2002

5340-66-143-7092
Mounting Bracket

661437092
024AMR059 ISSUE 2: RNCC: 3 | RNVC: 1
024AMR059-1: RNCC: 3 | RNVC: 2

6 Nov 1997

5340-66-066-4868
Dust And Moisture Seal Protective Plug

660664868
CA93-79: RNCC: 3 | RNVC: 2
FA9032SA9379: RNCC: 3 | RNVC: 2

30 Jan 1974

5340-66-066-4257
Angle Bracket

660664257
179409K: RNCC: 3 | RNVC: 2

7 Feb 1974

5340-66-150-5387
Leakproof Seal Plug

661505387
NO PRIMARY REF 66-150-5387: RNCC: 3 | RNVC: 2
01193050: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-132-5242
Nut Cover

661325242
05-777: RNCC: 3 | RNVC: 2

17 Mar 1989

5340-66-135-3093
Hand Crank

661353093
601-52010: RNCC: 3 | RNVC: 2
601-52010: RNCC: 5 | RNVC: 2

24 Mar 1992

5340-66-137-8757
Expansion Plug

661378757
121450-01990: RNCC: 3 | RNVC: 2

29 Apr 1993

5340-66-141-2618
Helical Compression Spring Retainer

661412618
6.160.3009: RNCC: 3 | RNVC: 2

9 Nov 1995

5340-66-148-3828
Mounting Bracket

661483828
F/2888-520-019H: RNCC: 3 | RNVC: 2
Q EDE VHNP F/2888-520-019H: RNCC: 5 | RNVC: 2

25 Feb 2002

5340-66-160-9493
Manual Control Handle

661609493
BMD-A26-0034-01: RNCC: 3 | RNVC: 2

21 Mar 2013

5340-66-024-2658
Buckle

660242658
ADE(M)183-4: RNCC: 3 | RNVC: 2
374: RNCC: 4 | RNVC: 1

1 Jan 1968

5340-66-139-2736
Retaining Clip

661392736
SCES12165: RNCC: 3 | RNVC: 1
9999-9506: RNCC: 3 | RNVC: 2
9999-9506: RNCC: 5 | RNVC: 2
9999-9506: RNCC: 5 | RNVC: 2

21 Jul 1994

5340-66-011-7201
Rod End Clevis

5340-66-032-5115
Handwheel

5340-66-156-3497
Access Cover

661563497
DF13-125-1: RNCC: 3 | RNVC: 2

2 Nov 2007

5340-66-126-2249
Manual Control Lever

661262249
6R3-41271-00: RNCC: 3 | RNVC: 2

19 Dec 1990

5340-66-143-3251
Plug

661433251
233924-01: RNCC: 3 | RNVC: 2

9 Apr 1998

5340-66-152-2666
General Purpose Resilient Mount

661522666
BMA-H31-0004-01: RNCC: 3 | RNVC: 2

30 Sep 2004

5340-66-132-1850
Handwheel

661321850
3641-7 MOD 611: RNCC: 3 | RNVC: 2

10 Jul 1989

5340-66-110-8996
Saddle

661108996
407157-4: RNCC: 3 | RNVC: 2

11 Oct 2001

5340-66-032-5594
Protective Cap-Plug

5340-66-146-3728
Mounting Plate

661463728
73127-2-06: RNCC: 3 | RNVC: 2

18 Apr 2000

5340-66-147-7887
Angle Bracket

661477887
F/2888-550-019B: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-019B: RNCC: 5 | RNVC: 2

24 Sep 2001

5340-66-060-9073
Handwheel

660609073
S3442: RNCC: 3 | RNVC: 2

19 Mar 1974

5340-66-113-6645
Protective Tooling

661136645
TOOLING FOR 5340-66-101-5712: RNCC: 3 | RNVC: 2

28 Mar 1982

5340-66-154-6777
Access Cover

661546777
VTR251-2TSUB14F4T19-7IIINM40W3P-: RNCC: 3 | RNVC: 1

11 Aug 2006

5340-66-150-0626
Padlock

661500626
NO PRIMARY REF 66-150-0626: RNCC: 3 | RNVC: 2
03381443: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-155-3122
Block

661553122
471-41243-203: RNCC: 3 | RNVC: 2
512513: RNCC: 5 | RNVC: 2

27 Feb 2007

5340-66-145-5832
Mounting Bracket

661455832
DE250980210-1: RNCC: 3 | RNVC: 2

7 Oct 1999

5340-66-152-4543
Mounting Bracket

661524543
15003714: RNCC: 3 | RNVC: 2

22 Dec 2004

5340-66-158-6435
Electronic Equipment Hardware Kit

661586435
RM-MP-MX-23/19: RNCC: 3 | RNVC: 2
RM-MP-MX-23/19: RNCC: 5 | RNVC: 2

6 May 2010

5340-66-153-3488
Tapered Plug

661533488
1587950: RNCC: 3 | RNVC: 2
471-RH000-007-T01: RNCC: 3 | RNVC: 2

21 Jul 2005

5340-66-128-5372
Retaining Strap

661285372
MWC9380: RNCC: 3 | RNVC: 2
MWC9380: RNCC: 5 | RNVC: 2

13 Jan 1989

5340-66-154-5182
Retaining Strap

661545182
MH-A551-0134-A4: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-66-155-0397
Mounting Bracket

661550397
010-10111-00: RNCC: 3 | RNVC: 2
010-10111-00: RNCC: 5 | RNVC: 2

21 Nov 2006

5340-66-021-1269
Dust And Moisture Seal Boot

660211269
CA20-18: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-152-4891
Hand Crank

661524891
DE251680015: RNCC: 3 | RNVC: 2

8 Feb 2005

5340-66-131-6455
Protective A Cover

661316455
640/1/30574: RNCC: 3 | RNVC: 2

11 Jan 1989

5340-66-152-1492
Track Filler Plate

661521492
434041E: RNCC: 3 | RNVC: 2

17 Jul 2004

5340-66-160-7124
Mounting Plate

661607124
15006099: RNCC: 3 | RNVC: 2

5 Nov 2012

5340-66-158-7564
Mounting Bracket

661587564
BMA-A13-0052-01: RNCC: 3 | RNVC: 2

28 Jul 2010

5340-66-113-6650
Protective Tooling

661136650
TOOLING FOR 5340-66-101-5717: RNCC: 3 | RNVC: 2

28 Mar 1982

5340-66-115-0375
B Stiffener Support

661150375
AMR/SK50/22-13-3: RNCC: 3 | RNVC: 2

25 Jun 1982

5340-66-160-4293
Double Angle Bracket

661604293
BMA-A09-0059: RNCC: 3 | RNVC: 2

19 Jul 2012

5340-66-120-6751
Fwd. Hinge Half

661206751
12S1796-11-135: RNCC: 3 | RNVC: 2

13 Oct 1986

5340-66-156-9773
Anti-Rotate Bracket

661569773
NO PRIMARY REF 66-156-9773: RNCC: 3 | RNVC: 2
BT365-247: RNCC: 5 | RNVC: 9

25 Jun 2008

5340-66-143-4445
Rh Side Panel

661434445
492079-01: RNCC: 3 | RNVC: 2

6 May 1998

5340-66-156-3336
Mounting Bracket

661563336
BMA-A05-1198: RNCC: 3 | RNVC: 2

31 Oct 2007

5340-66-150-3723
Spring Tension Clip

661503723
NO PRIMARY REF 66-150-3723: RNCC: 3 | RNVC: 2
06601814: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-151-8335
Mounting Bracket

661518335
A00007-00580-D-0011YY.2: RNCC: 3 | RNVC: 2

17 Dec 2003

5340-66-146-3618
Manual Control Handle

661463618
3.280.1603: RNCC: 3 | RNVC: 2
3.280.1603: RNCC: 5 | RNVC: 2

13 Apr 2000

5340-66-147-2667
Wash Arm

661472667
DLL9: RNCC: 3 | RNVC: 2

15 Dec 2000

5340-66-072-5011
Hinged Hasp

660725011
HASPANDSTAPLE4INBRASS: RNCC: 3 | RNVC: 2
WGD0100: RNCC: 5 | RNVC: 2
04282303: RNCC: 5 | RNVC: 2

5 Jul 1974

5340-66-159-1449
Mounting Bracket

661591449
NTPHACK: RNCC: 3 | RNVC: 2
NTPHACK: RNCC: 5 | RNVC: 2

8 Mar 2011

5340-66-023-9516
Friction Catch

660239516
425: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-128-6376
Rod End Connector

661286376
HYG4073: RNCC: 3 | RNVC: 2
GIR8UK: RNCC: 5 | RNVC: 2

12 Mar 1992

5340-66-144-4808
Webbing Strap

661444808
00-240324A: RNCC: 3 | RNVC: 2

11 Nov 1998

5340-66-154-7289
Locking Locator

661547289
10000160-2: RNCC: 3 | RNVC: 2

23 Aug 2006

5340-66-050-8351
Hi Fitting Assembly

660508351
C4WM1239-3: RNCC: 3 | RNVC: 2

20 May 1972

5340-66-149-1692
Webbing Strap

661491692
438Y/D: RNCC: 3 | RNVC: 2

28 Jan 2003

5340-66-151-8536

5340-66-146-3692

5340-66-159-4308
Mounting Plate

661594308
BMU-A05-3115B01: RNCC: 3 | RNVC: 2

11 Jul 2011

5340-66-152-2532
Key Holder

661522532
NO PRIMARY REF 66-152-2532: RNCC: 3 | RNVC: 2
46749600: RNCC: 5 | RNVC: 2

11 Jun 2004

5340-66-157-6756
Dust Cap

661576756
D-2609: RNCC: 3 | RNVC: 2

6 Feb 2009

5340-66-126-2354
Fitting Plate

661262354
6R3-42738-00-5B: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-66-102-4603
Retaining Strap

661024603
EK004-1: RNCC: 3 | RNVC: 2

9 Dec 1979

5340-66-158-0916
Angle Bracket

661580916
F1854ASM496-001: RNCC: 3 | RNVC: 2

10 Aug 2009

5340-66-147-8465
Flir Lifting Handle

661478465
TAS201/16P: RNCC: 3 | RNVC: 2
TAS201/16P: RNCC: 5 | RNVC: 2

4 Apr 2002

5340-66-151-3490
Dust And Moisture Seal Protective Cover

661513490
NALM00187-7: RNCC: 3 | RNVC: 2
NALM00187-7: RNCC: 5 | RNVC: 1

11 Jun 2004

5340-66-033-5912
Handwheel

5340-66-033-4731
Angle Bracket

5340-66-143-9064
Webbing Strap

661439064
DPD/4010/2033: RNCC: 3 | RNVC: 1

2 Sep 1997

5340-66-142-6591
Mounting Bracket

661426591
DSA-10-389-11: RNCC: 3 | RNVC: 2

14 Jan 1997

5340-66-141-7738
Elastic Strip

661417738
ES 80 DB 300MM: RNCC: 3 | RNVC: 2
112552783: RNCC: 3 | RNVC: 2

19 Jan 1996

5340-66-160-4889
Mounting Bracket

661604889
P10536-23: RNCC: 3 | RNVC: 2

17 Aug 2012

5340-66-159-8251
Mounting Plate

661598251
BMU-A05-2100-01: RNCC: 3 | RNVC: 2

27 Feb 2012

5340-66-122-7211
General Purpose Resilient Mount

5340-66-119-2065

5340-66-120-9460

5340-66-145-5790
Mounting Bracket

661455790
DE250980210-2: RNCC: 3 | RNVC: 2

7 Oct 1999

5340-66-144-2348
Manual Control Lever

661442348
B0075: RNCC: 3 | RNVC: 2
B75: RNCC: 5 | RNVC: 2

27 Jul 1998

5340-66-155-3882
Vent Plug

661553882
471-DE006: RNCC: 3 | RNVC: 2
1341418: RNCC: 5 | RNVC: 2

20 Mar 2007

5340-66-147-4092
Gas Strut

661474092
Q EDE VHST/40010: RNCC: 3 | RNVC: 2
40010: RNCC: 5 | RNVC: 2

2 May 2001

5340-66-139-9990
Pallet Stop Plate

661399990
12760-B-301: RNCC: 3 | RNVC: 1
12760-B-301/3: RNCC: 3 | RNVC: 2

23 Aug 1994

5340-66-128-4489
Water J Sealing Cup

661284489
9111296010: RNCC: 3 | RNVC: 2
9111296010: RNCC: 5 | RNVC: 2

23 Oct 1987

5340-66-155-5339
Mounting Bracket

661555339
471-30009-601: RNCC: 3 | RNVC: 2
507405: RNCC: 5 | RNVC: 2

11 Apr 2007

5340-66-144-5387
Manual Control Handle

661445387
SPSRH1-2: RNCC: 3 | RNVC: 2
PUMP#2/17-18: RNCC: 5 | RNVC: 2
PUMP#2/17-18: RNCC: 5 | RNVC: 9

26 Nov 1998

5340-66-160-1410
Dust And Moisture Seal Boot

661601410
C500-212: RNCC: 3 | RNVC: 2
121274: RNCC: 5 | RNVC: 2

12 Apr 2012

5340-66-157-0924
Dust And Moisture Seal Protective Cap

661570924
22M-30-22131: RNCC: 3 | RNVC: 2
22M-30-22131: RNCC: 5 | RNVC: 2

23 Jul 2008

5340-66-158-9049
Dust And Moisture Seal Protective Cap

661589049
2795-001: RNCC: 3 | RNVC: 2
P0006560: RNCC: 5 | RNVC: 2

13 Oct 2010

5340-66-144-4807
Webbing Strap

661444807
11-240317A-30: RNCC: 3 | RNVC: 2

11 Nov 1998

5340-66-153-4335
Loop Clamp

661534335
BMA-A05-1308: RNCC: 3 | RNVC: 2

18 Aug 2005

5340-66-123-0203
Escutcheon Plate

661230203
3015993R1: RNCC: 3 | RNVC: 2

26 Jul 1985

5340-66-155-8142
Angle Bracket

661558142
471-50808-118: RNCC: 3 | RNVC: 2
502517: RNCC: 5 | RNVC: 2

6 Jun 2007

5340-66-139-9153
Lifting Device

661399153
752.0042.01: RNCC: 3 | RNVC: 2
744635: RNCC: 5 | RNVC: 2

7 Sep 1994

5340-66-139-9983
Access Cover

661399983
PNP 40: RNCC: 3 | RNVC: 2

11 Aug 1994

5340-66-154-6655
Mounting Plate

661546655
275Z-0077: RNCC: 3 | RNVC: 1

9 Aug 2006

5340-66-075-0240
Manual Control Lever

660750240
706-561: RNCC: 3 | RNVC: 2

25 Jul 1974

5340-66-031-7544
Rod End Clevis

660317544
213-2: RNCC: 3 | RNVC: 2

11 Mar 1969

5340-66-140-5737
Right Side Slide

661405737
004-008-4: RNCC: 3 | RNVC: 2

25 Oct 1995

5340-66-128-1634
Angle Bracket

661281634
DE610100001: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-66-134-7764
Butt Hinge

5340-66-151-8490

5340-66-129-5857
Retaining Strap

661295857
RF-5003: RNCC: 3 | RNVC: 2

15 Feb 2000

5340-66-143-3548
Escutcheon Plate

661433548
1545-D-0115: RNCC: 3 | RNVC: 2

22 Apr 1998

5340-66-133-6451
Catch Strike

661336451
4: RNCC: 3 | RNVC: 2

12 Feb 1990

5340-66-154-7726
Angle Bracket

661547726
533.43.09.026: RNCC: 3 | RNVC: 2

4 Sep 2006

5340-66-153-2683
Mounting Bracket

661532683
A210 0086-2: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-126-7139
Loop Clamp

5340-66-082-6381
Strap Hinge Leaf

660826381
FWV10403: RNCC: 3 | RNVC: 2

29 Nov 1974

5340-66-132-6924
General Purpose Resilient Mount

661326924
AB100: RNCC: 3 | RNVC: 2

17 May 1989

5340-66-091-3926
Runner

660913926
225452: RNCC: 3 | RNVC: 2

27 Jan 1976

5340-66-142-9663
Angle Bracket

661429663
658/2/06817/005: RNCC: 3 | RNVC: 2

14 Apr 1997

5340-66-151-8095
Manual Control Lever

661518095
P10011-4: RNCC: 3 | RNVC: 2
P10026 ITEM6: RNCC: 5 | RNVC: 2

22 Sep 2003

5340-66-154-7393
Webbing Strap

661547393
10006013-085: RNCC: 3 | RNVC: 2
10006013-085: RNCC: 5 | RNVC: 2

25 Aug 2006

5340-66-050-8349
Hi Fitting Assembly

660508349
C4WM1231-3: RNCC: 3 | RNVC: 2

20 May 1972

5340-66-144-8846
Retaining Cord Asse

661448846
HYG7731: RNCC: 3 | RNVC: 2

19 Apr 1999

5340-66-131-0359
Dust And Moisture Seal Protective Cap

661310359
A201319: RNCC: 3 | RNVC: 2

3 Nov 1988

5340-66-058-9794
Nonmetallic Bumper

660589794
2-112: RNCC: 3 | RNVC: 2

20 Apr 1975

5340-66-147-3116
Webbing Strap

661473116
1841221: RNCC: 3 | RNVC: 2

26 Feb 2001

5340-66-157-7638

5340-66-153-8565
Dust And Moisture Seal Protective Cap

661538565
SS-025DC: RNCC: 3 | RNVC: 2
SS-025DC: RNCC: 5 | RNVC: 2

17 Nov 2005

5340-66-101-7486
Lock Key

661017486
400/16749/E3: RNCC: 3 | RNVC: 2

8 Aug 1979

5340-66-146-6110
Mounting Bracket

661466110
A55-997-B2126-0A00: RNCC: 3 | RNVC: 2

7 Jun 2000

5340-66-128-5265
Loop Clamp

661285265
C4: RNCC: 3 | RNVC: 2
HYL307/C4: RNCC: 5 | RNVC: 2

8 Oct 1988

5340-66-158-7762
Mounting Plate

661587762
BMA-A07-0067-01: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-66-156-0695
Cable Safety Interl

661560695
G05-5350: RNCC: 3 | RNVC: 2

16 Aug 2007

5340-66-130-7365
Escutcheon Plate

661307365
A52122: RNCC: 3 | RNVC: 2
16230-060: RNCC: 3 | RNVC: 2
900940: RNCC: 3 | RNVC: 2

17 May 1988

5340-66-154-7498
Access Cover

661547498
VTR251-2TSUB14F4T19.7IIINM40W3P-: RNCC: 3 | RNVC: 1

29 Aug 2006

5340-66-113-6648
Protective Tooling

661136648
TOOLING FOR 5340-66-101-5715: RNCC: 3 | RNVC: 2

28 Mar 1982

5340-66-145-4543
Setting Adaptor

661454543
608/4/54694: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-66-149-3046
Permanent Magnet

661493046
NO PRIMARY REF 66-149-3046: RNCC: 3 | RNVC: 2
09160706: RNCC: 5 | RNVC: 2

26 Mar 2003

5340-66-141-0335
Nonmetallic Bumper

661410335
471-51805-135: RNCC: 3 | RNVC: 2
1475770: RNCC: 5 | RNVC: 2

18 Aug 1995

5340-66-145-9627
Webbing Strap

661459627
1861A41-02MTR: RNCC: 3 | RNVC: 2

31 Oct 2001

5340-66-146-0851
Mounting Plate

661460851
438 0355-02: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-66-096-2825
Angle Bracket

660962825
446D2114-054: RNCC: 3 | RNVC: 2

11 Dec 1977

5340-66-108-9842
Access Cover

661089842
163P/0215/014 TYPE C: RNCC: 3 | RNVC: 1

18 Sep 1981

5340-66-160-1087
Manual Control Lever

661601087
B40023OD: RNCC: 3 | RNVC: 2
90-7732-01: RNCC: 5 | RNVC: 2

2 Apr 2012

5340-66-148-4001
Cap Assembly

661484001
M48-0173A02: RNCC: 3 | RNVC: 2
1520830: RNCC: 5 | RNVC: 2

15 Mar 2002

5340-66-144-6054
Webbing Strap

661446054
AS/NZS 4380:1996: RNCC: 3 | RNVC: 1
11-240503B-100: RNCC: 3 | RNVC: 2
11-240503B-100: RNCC: 3 | RNVC: 2

15 Dec 1998

5340-66-143-6553
Retaining Strap

661436553
031804: RNCC: 3 | RNVC: 2

10 Oct 1997

5340-66-155-3180
Angle Bracket

661553180
BMP-A18-3020-01: RNCC: 3 | RNVC: 2

1 Mar 2007

5340-66-155-5412
Mounting Bracket

661555412
471-30466-828: RNCC: 3 | RNVC: 2
504405: RNCC: 5 | RNVC: 2

12 Apr 2007

5340-66-026-0780
Dust And Moisture Seal Protective Cap

660260780
ADE(W)67-755-1ISSUE1: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-143-1467
Dust And Moisture Seal Protective Cover

661431467
138100 16440 K 0001/20/21: RNCC: 3 | RNVC: 2
9051460596: RNCC: 5 | RNVC: 2

28 Jan 1998

5340-66-147-0695
Protective Cover

5340-66-067-5742
Filter Access Cover

5340-66-128-7290
Manual Control Lever

661287290
NTC1563: RNCC: 3 | RNVC: 2
0068-00-000-1563: RNCC: C | RNVC: 1

13 Oct 1993

5340-66-150-5145
First Aid Kit

661505145
NO PRIMARY REF 66-150-5145: RNCC: 3 | RNVC: 2
03774024: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-130-4525
Angle Bracket

5340-66-158-7721
Mounting Plate

661587721
BMA-A05-0509: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-66-155-3314
Rod End Connector

661553314
275C-0245: RNCC: 3 | RNVC: 2

5 Mar 2007

5340-66-143-0985
Turnsnib

661430985
TR-1: RNCC: 3 | RNVC: 2

5 May 1997

5340-66-054-1502
Butt Hinge

660541502
R49STD5B: RNCC: 3 | RNVC: 2

18 Dec 1975

5340-66-155-2377
Access Cover

661552377
DI-0010-MI: RNCC: 3 | RNVC: 2

2 Feb 2007

5340-66-146-5487
Sleeve

661465487
545853 01: RNCC: 3 | RNVC: 2

13 Jul 2000

5340-66-117-9266
Hinge

661179266
350A21-1214-22: RNCC: 3 | RNVC: 2

16 Jun 1984

5340-66-146-3290
Support Arm

661463290
73016-3-39: RNCC: 3 | RNVC: 2

7 Apr 2000

5340-66-126-9080
Rubber Strap

661269080
09450-0000: RNCC: 3 | RNVC: 2

10 Sep 1986

5340-66-144-4696
Webbing Strap

661444696
AS/NZS 4380:1996: RNCC: 3 | RNVC: 1
11-240503B-40: RNCC: 3 | RNVC: 2

11 Nov 1998

5340-66-104-2069
Dirt And Deflector

5340-66-097-0686
Rim Lock Set

5340-66-146-9141
Loop Clamp

661469141
3316658S: RNCC: 3 | RNVC: 2
3316658S: RNCC: 5 | RNVC: 2

4 Oct 2000

5340-66-085-5142
Key Blank

660855142
600-1224F: RNCC: 3 | RNVC: 2

19 Oct 1975

5340-66-148-5684
Door Holder

661485684
13005: RNCC: 3 | RNVC: 2
13005-A: RNCC: 3 | RNVC: 2
A00007-00624-B-0002 REV02: RNCC: C | RNVC: 1

21 May 2002

5340-66-149-1842
Dust And Moisture Seal Protective Cap

661491842
70273Y108-E END CAP: RNCC: 3 | RNVC: 2
70273Y108-E ITEM 11: RNCC: 5 | RNVC: 1

6 Feb 2003

5340-66-158-4793
Angle Bracket

661584793
02121-040002: RNCC: 3 | RNVC: 2

12 Feb 2010

5340-66-158-4711
Manual Shut Damper

661584711
680209MSODGA010: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-66-155-1643
Mounting Plate

661551643
694596: RNCC: 3 | RNVC: 2

19 Dec 2006

5340-66-154-5472
Spring Holder

661545472
471-DP001-103: RNCC: 3 | RNVC: 2
471-DP001-103: RNCC: 5 | RNVC: 2

4 Jul 2006

5340-66-148-4654
Angle Bracket

661484654
C11361-45: RNCC: 3 | RNVC: 2

6 May 2002

5340-66-137-1323
Door Handle Boss

661371323
A200230 SHEET 1 OF 2 ITEM 7: RNCC: 3 | RNVC: 2

4 Sep 1992

5340-66-074-8549
Dust And Moisture Seal Protective Cap

660748549
RANTE21763: RNCC: 3 | RNVC: 2

25 Jun 1974

5340-66-058-6238
Retaining Strap

660586238
C0NDUITCLIP: RNCC: 3 | RNVC: 1

8 Jun 1973

5340-66-154-0944
Mounting Plate

661540944
557.22.09.416: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-66-152-5766
Mounting Plate

661525766
RP400195: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-66-146-1610
Seal Sleeve

661461610
541276 01: RNCC: 3 | RNVC: 2

4 Feb 2000

5340-66-059-8195
Butt Hinge

660598195
NYL0NHINGE3IN: RNCC: 3 | RNVC: 1

23 Aug 1973

5340-66-060-8677
Recess Handle

660608677
611: RNCC: 3 | RNVC: 2

30 Oct 1970

5340-66-160-8627
Mounting Bracket

661608627
P10473-17: RNCC: 3 | RNVC: 2

13 Feb 2013

5340-66-156-9368
Rod End Clevis

661569368
828455: RNCC: 3 | RNVC: 2

11 Jun 2008

5340-66-155-2219
Stacking Cone

661552219
ADF41MC8174067: RNCC: 3 | RNVC: 2
TL-A: RNCC: 3 | RNVC: 9

23 Jan 2007

5340-66-072-5018
Door Hook

660725018
829-6IN: RNCC: 3 | RNVC: 1

25 Jun 1974

5340-66-150-0206
Rigid Caster

661500206
NO PRIMARY REF 66-150-0206: RNCC: 3 | RNVC: 2
00852754: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-114-6337
Nonmetallic Solid Wheel

661146337
L841PU: RNCC: 3 | RNVC: 2

5 Apr 1984

5340-66-060-8162
Dust And Moisture Seal Protective Cap-Plug

660608162
10CP: RNCC: 3 | RNVC: 2

6 Mar 1974

5340-66-160-4888
Mounting Bracket

661604888
P10536-20: RNCC: 3 | RNVC: 2

17 Aug 2012

5340-66-150-6047
Shroud

661506047
NO PRIMARY REF 66-150-6047: RNCC: 3 | RNVC: 2
00512465: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-129-2064
Dust And Moisture Seal Protective Cap

661292064
HIFC 1015-O: RNCC: 3 | RNVC: 2

22 Oct 1987

5340-66-158-6535
Mounting Bracket

661586535
DI0005-204: RNCC: 3 | RNVC: 2

13 May 2010

5340-66-129-3257
Door Handle

661293257
A015461: RNCC: 3 | RNVC: 1
01DML0004/002 ITEM 2: RNCC: 3 | RNVC: 2
DSD0004/02 SHEET 3 ITEM 2: RNCC: 5 | RNVC: 2

29 Jan 1988

5340-66-142-1913
Mounting Bracket

661421913
024AMR044: RNCC: 3 | RNVC: 2
024AMR044-1: RNCC: 3 | RNVC: 2

8 Mar 1996

5340-66-146-3910
Strain Relief

661463910
73215-3-23: RNCC: 3 | RNVC: 2

20 Apr 2000

5340-66-143-7333
Rod End Clevis

661437333
VG85525-1M10-2.1030.26: RNCC: 3 | RNVC: 2
VG85525-IM10: RNCC: 5 | RNVC: 2

8 Jul 1997

5340-66-147-2732
Special Shaft

661472732
DWS506: RNCC: 3 | RNVC: 2

20 Dec 2000

5340-66-126-9462
Plate Multiplate Pi

661269462
C2240G: RNCC: 3 | RNVC: 2

31 Oct 1986

5340-66-147-2734
Plug

661472734
DWT371: RNCC: 3 | RNVC: 2

20 Dec 2000

5340-66-120-4744
Spring Tension Clip

661204744
YA6239880178: RNCC: 3 | RNVC: 2

19 May 1984

5340-66-152-6020
Loop Clamp

661526020
1621063: RNCC: 3 | RNVC: 2
471-50832-102: RNCC: 3 | RNVC: 2

15 Dec 2004

5340-66-154-8511
Blank Panel

661548511
15010478-03: RNCC: 3 | RNVC: 2

19 Sep 2006

5340-66-154-3278
Access Cover

661543278
471-RH000-009-T03: RNCC: 3 | RNVC: 2
471-RH000-009-T03: RNCC: 5 | RNVC: 2

26 Apr 2006

5340-66-145-9492
Mounting Bracket

661459492
0386X0025: RNCC: 3 | RNVC: 2

5 Nov 2001

5340-66-158-3439
General Purpose Resilient Mount

661583439
F50-1-2: RNCC: 3 | RNVC: 2
DF01-221-15: RNCC: 5 | RNVC: 2

19 Nov 2009

5340-66-131-7029
Rod End Clevis

661317029
11M018-5: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-66-116-5534
Retaining Strap

661165534
180/16: RNCC: 3 | RNVC: 2

6 Oct 1983

5340-66-145-4837
Dog Nut

661454837
A21295-5: RNCC: 3 | RNVC: 2

29 Sep 1999

5340-66-144-5479
Track Stop

661445479
00-240568B: RNCC: 3 | RNVC: 2

7 Dec 1998

5340-66-155-4887
Mounting Bracket

661554887
ARLM0849: RNCC: 3 | RNVC: 2

2 Apr 2007

5340-66-150-0770
Expansion Shield

661500770
NO PRIMARY REF 66-150-0770: RNCC: 3 | RNVC: 2
01794001: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-151-5805
Side Console Top Panel

661515805
LTB-A14-0018-01: RNCC: 3 | RNVC: 2
LTB-A14-0018: RNCC: 5 | RNVC: 2

21 Jul 2003

5340-66-150-1214
Plug Button

661501214
NO PRIMARY REF 66-150-1214: RNCC: 3 | RNVC: 2
09560415: RNCC: 5 | RNVC: 2

18 Jun 2003

5340-66-144-5248
Mounting Bracket

661445248
A209142-3L: RNCC: 3 | RNVC: 2

3 Dec 1998

5340-66-035-6835
Dust And Moisture Seal Protective Plug

660356835
CA30092-565: RNCC: 3 | RNVC: 2

14 Apr 1970

5340-66-037-8576
Handwheel

660378576
STDP/0302/096: RNCC: 3 | RNVC: 2

17 Apr 1971

5340-66-154-9202
Mounting Bracket

661549202
RPC-FMB-RW-001-IBL: RNCC: 3 | RNVC: 2

6 Oct 2006

5340-66-144-8774
Mounting Bracket

661448774
14221/14/022: RNCC: 3 | RNVC: 2

15 Apr 1999

5340-66-154-0836
Mounting Bracket

661540836
DE252010008: RNCC: 3 | RNVC: 2

17 Feb 2006

5340-66-010-1454
Rope Cleat

660101454
CH4: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-104-3545
Electrical-Mec Post

5340-66-122-6304
General Purpose Resilient Mount

661226304
41GC16: RNCC: 3 | RNVC: 2
41GC16: RNCC: 3 | RNVC: 2

11 Oct 1984

5340-66-147-4094
Gas Strut

661474094
Q EDE VHST/45047: RNCC: 3 | RNVC: 2
45047: RNCC: 5 | RNVC: 2

2 May 2001

5340-66-160-1111
Mounting Bracket

661601111
PN106076: RNCC: 3 | RNVC: 2

3 Apr 2012

5340-66-132-2906
Slide

661322906
371111019106: RNCC: 3 | RNVC: 2

2 Oct 1989

5340-66-157-6294
Mounting Bracket

661576294
AL06037-1: RNCC: 3 | RNVC: 2

22 Jan 2009

5340-66-122-6244
Insulator

661226244
X50QL264A: RNCC: 3 | RNVC: 2
X50QL264: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1
X50QL264A: RNCC: 5 | RNVC: 2
20QL19310: RNCC: 5 | RNVC: 2

11 Oct 1984

5340-66-115-6133
Mounting Bracket

661156133
527.10.09.078: RNCC: 3 | RNVC: 2
527.10.09.004: RNCC: 5 | RNVC: 9

3 Oct 1995

5340-66-106-4018
Handwheel

661064018
C0005-16: RNCC: 3 | RNVC: 2

14 Jul 1980

5340-66-161-1862
Webbing Strap

661611862
10008205-02: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-66-156-1998
Retaining Strap

661561998
893-4355: RNCC: 3 | RNVC: 2
15012381: RNCC: 5 | RNVC: 2

21 Sep 2007

5340-66-146-0864
Brace Bracket

661460864
438 0525-04: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-66-123-5326
Kick Door Plate

661235326
750-05.2200-22: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-66-155-4261
Loop Clamp

661554261
203-62-61240: RNCC: 3 | RNVC: 2
203-62-61240: RNCC: 5 | RNVC: 2

26 Mar 2007

5340-66-113-6652
Protective Tooling

661136652
TOOLING FOR 5340-66-101-5719: RNCC: 3 | RNVC: 2

28 Mar 1982

5340-66-153-4853
Front Rack Assy

661534853
2632340070: RNCC: 3 | RNVC: 2
2632340070: RNCC: 5 | RNVC: 2

26 Aug 2005

5340-66-150-0750
Expansion Shield

661500750
NO PRIMARY REF 66-150-0750: RNCC: 3 | RNVC: 2
03754405: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-149-5783
Permanent Magnet

661495783
NO PRIMARY REF 66-149-5783: RNCC: 3 | RNVC: 2
QTTMB3100: RNCC: 5 | RNVC: 2

7 Apr 2003

5340-66-157-4850
Butt Hinge

661574850
UES-96-50-520-50: RNCC: 3 | RNVC: 2

28 Nov 2008

5340-66-151-5905
Mounting Plate

661515905
LTA-A08-004: RNCC: 3 | RNVC: 1
LTA05127: RNCC: 3 | RNVC: 2

13 Aug 2003

5340-66-037-1781
Angle Bracket

660371781
ADE(V)225-293: RNCC: 3 | RNVC: 2

12 Oct 1970

5340-66-119-8448
Fl Bracket Assembly

661198448
PD672-95: RNCC: 3 | RNVC: 2

13 Jan 1984

5340-66-149-0277
Manual Contr Handle

5340-66-150-1390
Ear Plug Foam Large

661501390
NO PRIMARY REF 66-150-1390: RNCC: 3 | RNVC: 2
00827152: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-151-5831
Multiple Angle Bracket

661515831
LTE-A05-0025-01: RNCC: 3 | RNVC: 2
LTE-A05-0025: RNCC: 5 | RNVC: 2

22 Jul 2003

5340-66-151-9827
Bail Handle

661519827
LTA02041: RNCC: 3 | RNVC: 2
LTB-A05-0017 ITEM31: RNCC: 5 | RNVC: 2

24 Feb 2004

5340-66-138-8250
Mounting Plate

661388250
196640-12080: RNCC: 3 | RNVC: 2

21 Apr 1994

5340-66-142-9181
Runner

661429181
658/2/06524/004: RNCC: 3 | RNVC: 2

19 Mar 1997

5340-66-056-0308
Dust And Moisture Seal Protective Cap

660560308
241157: RNCC: 3 | RNVC: 2

20 Oct 1972

5340-66-100-0507
Doorknob

661000507
1605-56: RNCC: 3 | RNVC: 2

22 Dec 1978

5340-66-122-5120
General Purpose Resilient Mount

661225120
7651: RNCC: 3 | RNVC: 2

24 Nov 1984

5340-66-010-1406
Barrel Bolt

660101406
335: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-158-2535
Access Cover

661582535
HYG3621: RNCC: 3 | RNVC: 2

13 Oct 2009

5340-66-131-7032
Assembly Clamp

661317032
1126M005: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-66-144-9948
Splash And Dr Guard

661449948
437792: RNCC: 3 | RNVC: 2

22 Jun 1999

5340-66-145-7819
Cushioning Pad

661457819
M139-4S-585: RNCC: 3 | RNVC: 2

4 Nov 1999

5340-66-159-6361
Bumper

661596361
S8-428-312: RNCC: 3 | RNVC: 2

16 Nov 2011

5340-66-155-8416
Bumper

661558416
471-50810-145: RNCC: 3 | RNVC: 2
506956: RNCC: 5 | RNVC: 2

14 Jun 2007

5340-66-155-6331
Slide Bar

661556331
471-30205-403: RNCC: 3 | RNVC: 2
507978: RNCC: 5 | RNVC: 2

30 Apr 2007

5340-66-013-6541
Belt-Strap Keeper

660136541
5340-027: RNCC: 3 | RNVC: 1
MGO(M)494 ITEM 15: RNCC: 3 | RNVC: 2
DEF(AUST)2010: RNCC: 4 | RNVC: 1

1 Jan 1968

Load More Results