What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is a Hasp Staple?

A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

Hardware, Commercial - Australia (AU)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Australia (AU) - NCB is 66

Page 24 of 29

NSN Format for Hardware, Commercial
Codified by Australia

53	40	66	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Australia (AU)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 53 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 78 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 109 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 25 Items
Holder,Spring 26 Items
What is a Compression Cup? 11 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 43 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 85 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 54 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 27 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 249 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 36 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 87 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 39 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 11 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 16 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 15 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Rim Latch? 18 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Rim Lock? 13 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 12 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 17 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 17 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 18 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 103 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 11 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 59 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 14 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 14 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Plug Button? 12 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Corrosion Preventive Anode? 27 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 78 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 268 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 88 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 70 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 36 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 40 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 41 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Plain Solid Disk? 41 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 12 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 608 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 57 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 54 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 317 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 48 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 40 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 83 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Quick Release Plunger? 17 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 65 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 24 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 14 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 22 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 49 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 19 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 151 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 15 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 444 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 128 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 42 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 53 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 25 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 201 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 33 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 133 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 42 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 54 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Strapping? 28 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 75 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Screw Thread Insert And Tool Assortment? 18 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 28 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 18 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 740 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 11 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 14 Items
What is an Antipilferage Seal? 27 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 129 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Seal Retaining Plate? 29 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 47 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1862 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 15 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 11 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 10 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 766 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 27 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 65 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 79 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 71 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 22 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 12 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 14 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 35 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 50 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 28 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 15 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 20 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 11 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 83 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 138 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 393 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 38 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 11 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 22 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
What is a Key Blank? 22 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 10 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 114 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 11 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 20 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 12 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is a Bumper? 74 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 24 of 29

5340-66-153-3154
Swivel Caster

661533154
L85211: RNCC: 3 | RNVC: 2

12 Jul 2005

5340-66-150-2040
Support Hook

661502040
NO PRIMARY REF 66-150-2040: RNCC: 3 | RNVC: 2
04970806: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-157-9641
Angle Bracket

661579641
MCIS-00033-01A: RNCC: 3 | RNVC: 2
MCIS-00033-01A: RNCC: 5 | RNVC: 2

3 Jun 2009

5340-66-143-6429
T Bracket

661436429
VII(01)(STBD FWD): RNCC: 3 | RNVC: 2

7 Oct 1997

5340-66-026-7517
Angle Bracket

660267517
ADE(M)59-168: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-148-8202
Dust And Moisture Seal Protective Cap

661488202
3300217: RNCC: 3 | RNVC: 2
C8-15: RNCC: 3 | RNVC: 2

27 Aug 2002

5340-66-150-3722
Spring Tension Clip

661503722
NO PRIMARY REF 66-150-3722: RNCC: 3 | RNVC: 2
06601717: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-157-2935
Dust And Moisture Seal Protective Cap

661572935
D4075075: RNCC: 3 | RNVC: 2

30 Sep 2008

5340-66-119-7843
Door Dog Clip

661197843
233/63: RNCC: 3 | RNVC: 2

19 Dec 1983

5340-66-139-6157
Hand Crank

661396157
56W4-S116: RNCC: 3 | RNVC: 1
56W4-S116: RNCC: 3 | RNVC: 2

6 Jul 1994

5340-66-152-4326
Mounting Bracket

661524326
15003712: RNCC: 3 | RNVC: 2

9 Dec 2004

5340-66-143-0977
Door Closer

661430977
ARROW 737/S/AC SSS: RNCC: 3 | RNVC: 2

5 May 1997

5340-66-024-7275
Resilient Mount Plate

660247275
ADE(M)37-72: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-161-1317
Angle Bracket

661611317
AYG0360: RNCC: 3 | RNVC: 2

25 Jun 2013

5340-66-144-6333
Butt Hinge

661446333
HYM933: RNCC: 3 | RNVC: 2
HD2: RNCC: 5 | RNVC: 2

9 Feb 1999

5340-66-148-8700
Retainer Plate

661488700
DZP301T: RNCC: 3 | RNVC: 1

8 Nov 2002

5340-66-132-1252
Plate

661321252
EX2003540: RNCC: 3 | RNVC: 2

15 May 1989

5340-66-093-5506
Handwheel

660935506
4909/23: RNCC: 3 | RNVC: 2

24 Apr 1985

5340-66-153-4776
Access Cover

661534776
5412003: RNCC: 3 | RNVC: 2
5412003: RNCC: 5 | RNVC: 2

25 Aug 2005

5340-66-151-8072
Butt Hinge

661518072
DE251600015: RNCC: 3 | RNVC: 2
DE251600015: RNCC: 3 | RNVC: 2

30 Apr 2004

5340-66-153-5628
Clamping Catch

661535628
702L SS: RNCC: 3 | RNVC: 2
702L SS: RNCC: 5 | RNVC: 2

13 Sep 2005

5340-66-158-8372
Retaining Strap

661588372
180A20: RNCC: 3 | RNVC: 2
HYG4406: RNCC: 5 | RNVC: 2

20 Aug 2010

5340-66-160-1618
Dust And Moisture Seal Protective Cap

661601618
401577: RNCC: 3 | RNVC: 2

20 Apr 2012

5340-66-155-4831
Loop Clamp

661554831
120270-59420: RNCC: 3 | RNVC: 2

30 Mar 2007

5340-66-154-8697
Mounting Bracket

661548697
15011445: RNCC: 3 | RNVC: 2

25 Sep 2006

5340-66-139-0962
Tie Down Ring

661390962
X40RH218B: RNCC: 3 | RNVC: 2
X40RH218B: RNCC: 3 | RNVC: 2

7 Mar 1994

5340-66-160-7386
Mending Plate

661607386
15017355: RNCC: 3 | RNVC: 2

21 Nov 2012

5340-66-160-7382
Metal Grille

661607382
15016874: RNCC: 3 | RNVC: 2

21 Nov 2012

5340-66-150-0748
Expansion Shield

661500748
NO PRIMARY REF 66-150-0748: RNCC: 3 | RNVC: 2
08799119: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-122-2676
Door Stay

661222676
A1-1174-82-04 S3 ITEM B15: RNCC: 3 | RNVC: 2

29 Apr 1985

5340-66-147-2511
Bracket

661472511
60350: RNCC: 3 | RNVC: 2

8 Dec 2000

5340-66-145-2369
Permanent Magnet

661452369
10052: RNCC: 3 | RNVC: 2

26 Aug 1999

5340-66-141-6246
Access Cover

661416246
640/2/31343/000: RNCC: 3 | RNVC: 2

27 Jun 1997

5340-66-153-4064
Mounting Plate

661534064
15012778-01: RNCC: 3 | RNVC: 2

11 Aug 2005

5340-66-158-2325
Access Cover

661582325
BMU-A05-3176-01: RNCC: 3 | RNVC: 2
BMU-A05-3176: RNCC: 5 | RNVC: 2

7 Oct 2009

5340-66-155-3998
Clamp

661553998
38115060: RNCC: 3 | RNVC: 2

21 Mar 2007

5340-66-156-2520
Mounting Bracket

661562520
A2100166: RNCC: 3 | RNVC: 2

4 Oct 2007

5340-66-158-3617
Mounting Bracket

661583617
30V-06-0066-013-4/6: RNCC: 3 | RNVC: 2

26 Nov 2009

5340-66-128-6389
Buckle

661286389
3-386-0072-2: RNCC: 3 | RNVC: 2

12 Mar 1992

5340-66-156-1028
Access Cover

661561028
RP245820/B/29: RNCC: 3 | RNVC: 2
RP245820/B/29: RNCC: 5 | RNVC: 2

27 Aug 2007

5340-66-096-4454
Manual Control Lever

660964454
DE230020086: RNCC: 3 | RNVC: 2

27 Nov 1977

5340-66-140-5729
Mounting Plate

661405729
004-248: RNCC: 3 | RNVC: 2

19 Jul 1995

5340-66-155-2290
Collimato Tool Kit

661552290
SCES:10791: RNCC: 3 | RNVC: 2

29 Jan 2007

5340-66-059-8184
Sliding Door Track

660598184
TT416: RNCC: 3 | RNVC: 2

23 Aug 1973

5340-66-019-5768
Hinged Hasp

660195768
148: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-155-6129
Mounting Plate

661556129
X50QR45B: RNCC: 3 | RNVC: 2

24 Apr 2007

5340-66-157-7660
Loop Clamp

661577660
24095: RNCC: 3 | RNVC: 2
24083: RNCC: 3 | RNVC: 9

19 Mar 2009

5340-66-150-5302
Antipilferage Seal Locking Wire

661505302
NO PRIMARY REF 66-150-5302: RNCC: 3 | RNVC: 2
00731034: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-112-7666
Bumper Non Metallic

661127666
750-05.3000-12: RNCC: 3 | RNVC: 2
750-05.3000-12: RNCC: 5 | RNVC: 2

11 Sep 1995

5340-66-037-8570
Handwheel

660378570
STDP/0302/090: RNCC: 3 | RNVC: 2

17 Apr 1971

5340-66-155-8165
Retaining Band

661558165
471-50831-3: RNCC: 3 | RNVC: 2
510245: RNCC: 5 | RNVC: 2

6 Jun 2007

5340-66-147-7149
Access Cover

661477149
A5240: RNCC: 3 | RNVC: 2

7 Jun 2001

5340-66-101-2826
General Purpose Resilient Mount

661012826
FBFL: RNCC: 3 | RNVC: 2
FL30D: RNCC: C | RNVC: 1

29 Mar 1979

5340-66-155-8956
Mounting Plate

661558956
471-60801-178: RNCC: 3 | RNVC: 2
506754: RNCC: 5 | RNVC: 2

26 Jun 2007

5340-66-143-4444
Rear Panel

661434444
492081-01: RNCC: 3 | RNVC: 2

6 May 1998

5340-66-150-0675
Padlock

661500675
NO PRIMARY REF 66-150-0675: RNCC: 3 | RNVC: 2
00598456: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-155-8415
Mechanical Stop

661558415
471-50810-144: RNCC: 3 | RNVC: 2
506955: RNCC: 5 | RNVC: 2

14 Jun 2007

5340-66-131-6479
Mounting Bracket

661316479
640/2/27043: RNCC: 3 | RNVC: 2

11 Jan 1989

5340-66-154-6249
General Purpose Access Door

661546249
471-51631-16: RNCC: 3 | RNVC: 2
524533: RNCC: 5 | RNVC: 2

28 Jul 2006

5340-66-097-7740
Sliding Stay

660977740
TMGB157: RNCC: 3 | RNVC: 2

14 May 1978

5340-66-026-5359
S Threaded Standoff

5340-66-151-2256
Blanking Plug

661512256
90B00026: RNCC: 3 | RNVC: 2

3 Oct 2003

5340-66-150-1655
Eye Wash Msa Bottle

661501655
NO PRIMARY REF 66-150-1655: RNCC: 3 | RNVC: 2
04515566: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-157-4661
Catch Strike

661574661
V01-01-06-01-01: RNCC: 3 | RNVC: 2

26 Nov 2008

5340-66-150-0208
Rigid Caster

661500208
NO PRIMARY REF 66-150-0208: RNCC: 3 | RNVC: 2
00432378: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-155-1084
Mounting Bracket

661551084
471-20208-115: RNCC: 3 | RNVC: 2
523162: RNCC: 5 | RNVC: 2

5 Dec 2006

5340-66-150-9701
Rh Vent Cover

661509701
D-2516: RNCC: 3 | RNVC: 2

18 Jun 2004

5340-66-090-7389
Bow Handle

5340-66-159-4302
Mounting Plate

661594302
BMU-A05-3146B01: RNCC: 3 | RNVC: 2

11 Jul 2011

5340-66-147-7895
Dust And Moisture Seal Protective Cap

661477895
EK 856: RNCC: 3 | RNVC: 2
Q PAL EK 856: RNCC: 5 | RNVC: 2
EK 856: RNCC: 5 | RNVC: 2

24 Sep 2001

5340-66-146-3501
Panel

661463501
240457F: RNCC: 3 | RNVC: 2

12 Apr 2000

5340-66-044-0361
Loop Clamp

660440361
ADE(V)94-282: RNCC: 3 | RNVC: 2

25 Aug 1971

5340-66-150-5800
Access Door Hinge

661505800
NO PRIMARY REF 66-150-5800: RNCC: 3 | RNVC: 2
04089700: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-153-4238
Double Angle Bracket

661534238
DE230100023: RNCC: 3 | RNVC: 2

16 Aug 2005

5340-66-028-8946
Retaining Clip

660288946
HCF1748: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-155-0498
Clamping Catch

661550498
1414-05-02/4: RNCC: 3 | RNVC: 2

22 Nov 2006

5340-66-147-3193
Alignment Shaft

661473193
752-2002-90: RNCC: 3 | RNVC: 2

8 Mar 2001

5340-66-066-4252
Angle Bracket

660664252
179336K: RNCC: 3 | RNVC: 2

7 Feb 1974

5340-66-141-0143
General Purpose Resilient Mount

661410143
H63-146-80-92-8FF: RNCC: 3 | RNVC: 2

9 Aug 1995

5340-66-152-1794
Mounting Bracket

661521794
DTSA3TPL: RNCC: 3 | RNVC: 2
MLC-0459: RNCC: 5 | RNVC: 2

14 Aug 2004

5340-66-157-2330
Mounting Bracket

661572330
73RU49417M2: RNCC: 3 | RNVC: 2
73RU49417M2: RNCC: 5 | RNVC: 2

11 Sep 2008

5340-66-105-9882
Access Cover

661059882
C0005-2: RNCC: 3 | RNVC: 2

8 May 1980

5340-66-019-5652
Expansion Plug

660195652
TYPE A: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-145-0425
Runner

661450425
CR525: RNCC: 3 | RNVC: 2

28 May 1999

5340-66-154-1047
Turnbuckle

661541047
48626: RNCC: 3 | RNVC: 2

22 Feb 2006

5340-66-021-7457
Dust And Moisture Seal Boot

660217457
854600R1: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-157-7681
Loop Clamp

661577681
24097: RNCC: 3 | RNVC: 2

20 Mar 2009

5340-66-159-1543
Loop Clamp

661591543
EN4113S07WR: RNCC: 3 | RNVC: 2

15 Mar 2011

5340-66-058-6239
Retaining Strap

660586239
C0NDUITCLIP: RNCC: 3 | RNVC: 1

8 Jun 1973

5340-66-146-6997
Drain Plug Rod

661466997
1418087: RNCC: 3 | RNVC: 2

11 Aug 2000

5340-66-138-7450
Threaded Rod End

661387450
196630-06810: RNCC: 3 | RNVC: 2

31 Mar 1994

5340-66-140-4151
Hand Crank

661404151
FE85087A-125S: RNCC: 3 | RNVC: 2

29 Mar 1995

5340-66-156-8870
Mounting Bracket

661568870
DSE-01-001: RNCC: 3 | RNVC: 2

21 May 2008

5340-66-155-8979
Rod End Connector

661558979
471-50809-157: RNCC: 3 | RNVC: 2
502592: RNCC: 5 | RNVC: 2

26 Jun 2007

5340-66-159-1138
Double Angle Bracket

661591138
FE5915-080009: RNCC: 3 | RNVC: 2

23 Feb 2011

5340-66-151-5906
General Purpose Resilient Mount

661515906
M539887: RNCC: 3 | RNVC: 2
LTA08106: RNCC: 5 | RNVC: 2

14 Aug 2003

5340-66-164-8055

5340-66-066-4251
Angle Bracket

660664251
179283K: RNCC: 3 | RNVC: 2

7 Feb 1974

5340-66-161-1948
Mounting Bracket

661611948
15018767-G: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-66-159-0903
Turnbuckle

661590903
RF1541: RNCC: 3 | RNVC: 2
10008099: RNCC: 5 | RNVC: 2

3 Feb 2011

5340-66-117-9704
Clamp

661179704
P711934: RNCC: 3 | RNVC: 2

8 Feb 1985

5340-66-143-3665
Block

661433665
142503: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-66-087-7417
Grooved Clamp Coupling Ferrule

660877417
1213-2141201: RNCC: 3 | RNVC: 2

7 Apr 1975

5340-66-158-1796
Dust And Moisture Seal Protective Cover

661581796
CCT-701: RNCC: 3 | RNVC: 2

16 Sep 2009

5340-66-128-6616
Electronic Equipment Hardware Kit

661286616
MX-F206: RNCC: 3 | RNVC: 2
418/5/52540/000: RNCC: 3 | RNVC: 2

22 Jun 1993

5340-66-102-9599
Dust And Moisture Seal Protective Cap

661029599
720-28-2: RNCC: 3 | RNVC: 2

12 Sep 1970

5340-66-141-6202
Retaining Strap

661416202
DE250530387: RNCC: 3 | RNVC: 2
DE250530387: RNCC: 3 | RNVC: 2

18 Jun 1997

5340-66-107-6471
Spring Tension Clip

661076471
DE230010188: RNCC: 3 | RNVC: 2

4 Feb 1981

5340-66-146-1006
Tap-Stainless Steel

661461006
NC3: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-66-088-1837
Plug And Washer

660881837
1213-251285: RNCC: 3 | RNVC: 2

20 Apr 1975

5340-66-024-3194
Expansion Plug

660243194
0650710: RNCC: 3 | RNVC: 2
0650710: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-159-0057
Mounting Bracket

661590057
998/2/93238/002: RNCC: 3 | RNVC: 2

1 Dec 2010

5340-66-151-2276
Loop Clamp

661512276
JMS2011-20: RNCC: 3 | RNVC: 2

8 Oct 2003

5340-66-158-8006
Dust And Moisture Seal Protective Cover

661588006
DM-C-12: RNCC: 3 | RNVC: 2
P0006294: RNCC: 5 | RNVC: 2

4 Aug 2010

5340-66-056-2789
Rod End Clevis

660562789
12AH20316: RNCC: 3 | RNVC: 2
678-082393: RNCC: 5 | RNVC: 2

24 Nov 1972

5340-66-152-3800
Caster Wheel

661523800
DF01-714-02: RNCC: 3 | RNVC: 2
R6634: RNCC: 5 | RNVC: 2

13 Oct 2004

5340-66-157-9209
Dirt And Liquid Deflector

661579209
503 13 81-01: RNCC: 3 | RNVC: 2
503 13 81-01: RNCC: 5 | RNVC: 2

15 May 2009

5340-66-146-2015
Access Cover

661462015
472 8123-01: RNCC: 3 | RNVC: 2

11 Feb 2000

5340-66-154-8255
Mounting Bracket

661548255
137WE: RNCC: 3 | RNVC: 2

13 Sep 2006

5340-66-144-2340
Retaining Strap

661442340
031509: RNCC: 3 | RNVC: 2

24 Jul 1998

5340-66-025-3639
Retaining Bail

660253639
FSAP18: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-133-8427
Access Cover

661338427
DA96011000: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-66-157-7627

5340-66-151-8525

5340-66-151-8519

5340-66-133-7148
Webbing Strap

5340-66-155-5240
Manual Control Handle

661555240
471-30466-601: RNCC: 3 | RNVC: 2
501776: RNCC: 5 | RNVC: 2

10 Apr 2007

5340-66-158-4758
Angle Bracket

661584758
940-164: RNCC: 3 | RNVC: 2

11 Feb 2010

5340-66-160-9118
Webbing Strap

661609118
10006013-055: RNCC: 3 | RNVC: 2

4 Mar 2013

5340-66-140-3960
Handwheel

661403960
FE85080A-125S: RNCC: 3 | RNVC: 2

23 Mar 1995

5340-66-140-5819
Block Assembly

661405819
004-152-01: RNCC: 3 | RNVC: 2

26 Oct 1995

5340-66-152-8443
Mounting Plate

661528443
BMA-A11-0168-01: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-66-129-9546
S Threaded Standoff

5340-66-159-1944
Mounting Bracket

661591944
042274A-00: RNCC: 3 | RNVC: 2

29 Mar 2011

5340-66-139-2368
Mounting Bracket

661392368
DE250530108: RNCC: 3 | RNVC: 2

2 Aug 1994

5340-66-134-8396
General Purpose Resilient Mount

661348396
10008100: RNCC: 3 | RNVC: 2

6 Jul 1990

5340-66-156-8796
Mechanical Stop

661568796
TSU469-11: RNCC: 3 | RNVC: 2

19 May 2008

5340-66-050-6101
Angle Bracket

660506101
C4P10349-14: RNCC: 3 | RNVC: 2

18 May 1972

5340-66-142-9675
Angle Bracket

661429675
658/2/06409/002: RNCC: 3 | RNVC: 2

29 Apr 1997

5340-66-014-1283
Turnbuckle

660141283
04700607: RNCC: 3 | RNVC: 2
04700607: RNCC: 5 | RNVC: 2
LVS5/10E: RNCC: 5 | RNVC: 9

26 Jul 1961

5340-66-138-9700
Ext Rafting Bracket

661389700
ALUMINIUM TUBE,300 MM LG: RNCC: 3 | RNVC: 2

10 Dec 1993

5340-66-151-7869
Bail Handle

661517869
750244: RNCC: 3 | RNVC: 2

27 Mar 2004

5340-66-122-7561
Webbing Strap

661227561
SCES16610 ITEM 9: RNCC: 3 | RNVC: 2

26 Apr 1985

5340-66-128-5963
Support Hook

661285963
NO.2: RNCC: 3 | RNVC: 2
HYL9687: RNCC: 5 | RNVC: 2

26 Sep 1990

5340-66-150-8867
Strapping

661508867
UBB006-30P: RNCC: 3 | RNVC: 2
BANSTRAP-3-L: RNCC: 5 | RNVC: 2

5 Sep 2003

5340-66-143-3653
Locating Plug

661433653
142426-1: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-66-084-8355
Insert Handle

660848355
281126: RNCC: 3 | RNVC: 2

19 Oct 1975

5340-66-143-4857
Clamping Catch

661434857
640/9/34510/000: RNCC: 3 | RNVC: 2

19 May 1998

5340-66-142-9618
Multiple Angle Bracket

661429618
658/2/05220/000: RNCC: 3 | RNVC: 2

24 Mar 1997

5340-66-120-4507
Nut And Bolt Locking Plate

661204507
87GC213: RNCC: 3 | RNVC: 2
87GC213: RNCC: 3 | RNVC: 2

7 May 1984

5340-66-161-1727
Access Cover

661611727
15015833-02: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-66-142-3235
Extension Drawer Slide

661423235
310-2-18: RNCC: 3 | RNVC: 2

30 May 1996

5340-66-125-8526
Fan Barrel Assembly

661258526
3115-602: RNCC: 3 | RNVC: 2

4 Jun 1990

5340-66-143-8437
Electr Hardware Kit

661438437
MX-F245: RNCC: 3 | RNVC: 2
DE530020040: RNCC: 3 | RNVC: 2
DE530020040: RNCC: 3 | RNVC: 2

15 Aug 1997

5340-66-155-5610
Access Cover

661555610
471-30205-21: RNCC: 3 | RNVC: 2
507048: RNCC: 5 | RNVC: 2

16 Apr 2007

5340-66-152-3788
Mounting Plate

661523788
DE250900069: RNCC: 3 | RNVC: 2

14 Oct 2004

5340-66-157-2905
Loop Holder

661572905
D4075832: RNCC: 3 | RNVC: 2

30 Sep 2008

5340-66-161-2752
Access Cover

661612752
D4968-A429: RNCC: 3 | RNVC: 2

19 Aug 2013

5340-66-157-4188
Access Cover

661574188
471-51805-145: RNCC: 3 | RNVC: 2
525408: RNCC: 5 | RNVC: 2

14 Nov 2008

5340-66-159-2698
Webbing Strap

661592698
1100-00-0100C6: RNCC: 3 | RNVC: 2
QVRL1100000100C6: RNCC: 5 | RNVC: 2
1100-00-0100C6: RNCC: 6 | RNVC: 9

11 May 2011

5340-66-123-2845
General Purpose Resilient Mount

661232845
9150-01-09GPO2A: RNCC: 3 | RNVC: 2

13 Nov 1985

5340-66-126-2370
Bridge Clamp

661262370
6E5-24367-10: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-66-139-2367
Mounting Bracket

661392367
DE250530105: RNCC: 3 | RNVC: 2

2 Aug 1994

5340-66-133-9236
Retaining Clip

661339236
DA96302000-3: RNCC: 3 | RNVC: 2
DA96302000-3: RNCC: 5 | RNVC: 2

18 Nov 1997

5340-66-066-4237
Corner Brace

660664237
174511K: RNCC: 3 | RNVC: 2

27 Feb 1974

5340-66-151-8609
Support Arm

661518609
9210D05007022: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-66-054-5294
Spring Tension Clip

660545294
550-18-65: RNCC: 3 | RNVC: 2

15 Oct 1972

5340-66-143-3110
Dust And Moisture Seal Protective Cap

661433110
6 411 511: RNCC: 3 | RNVC: 2
6 411 511: RNCC: 5 | RNVC: 2

1 Apr 1998

5340-66-104-4399
Shelf Bracket

5340-66-155-5917
Mounting Plate

661555917
75EG34: RNCC: 3 | RNVC: 2

20 Apr 2007

5340-66-147-8597
Bush

661478597
GLY.PG283230A: RNCC: 3 | RNVC: 2
Q EDE BRGLY.PG283230A: RNCC: 5 | RNVC: 2
GLY.PG283230A: RNCC: 5 | RNVC: 2

27 Sep 2001

5340-66-152-2618
Headless Straight Rod

661522618
BMA-A05-0459-01: RNCC: 3 | RNVC: 2

29 Sep 2004

5340-66-157-3675
Access Cover

661573675
471-10026-12: RNCC: 3 | RNVC: 2
519062: RNCC: 5 | RNVC: 2

23 Oct 2008

5340-66-139-1944
Mounting Bracket

661391944
MEA 1756-2: RNCC: 3 | RNVC: 2

10 May 1994

5340-66-045-2687
Webbing Strap

660452687
P104-32: RNCC: 3 | RNVC: 2

17 Dec 1971

5340-66-147-2946
Angle Bracket

661472946
MH-A613-0001-E2: RNCC: 3 | RNVC: 2

5 Feb 2001

5340-66-150-0246
Swivel Caster

661500246
NO PRIMARY REF 66-150-0246: RNCC: 3 | RNVC: 2
00433092: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-153-6801
Angle Bracket

661536801
TIS-011: RNCC: 3 | RNVC: 2

12 Oct 2005

5340-66-138-7494
Manual Control Lever

661387494
196630-06901-1: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-66-145-0113
Dust And Moisture Seal Protective Cap

661450113
0568093: RNCC: 3 | RNVC: 2
AIM940370: RNCC: 5 | RNVC: 2

5 May 1999

5340-66-155-5056
Manual Control Handle

661555056
P10035-6: RNCC: 3 | RNVC: 2

3 Apr 2007

5340-66-147-6478
Dust And Moisture Seal Protective Cap

661476478
A55-997-B2180-0F00: RNCC: 3 | RNVC: 2
A53-997-B2180-0F00: RNCC: 5 | RNVC: 2

18 Oct 2001

5340-66-086-4081
Retainer

660864081
16-010977: RNCC: 3 | RNVC: 2

4 Mar 1976

5340-66-049-8329
Number Plat Bracket

660498329
3206-2-32: RNCC: 3 | RNVC: 2

3 Jun 1972

5340-66-156-2700
Spring Holder

661562700
471-50429-12: RNCC: 3 | RNVC: 2
503110: RNCC: 5 | RNVC: 2

15 Oct 2007

5340-66-158-2603
Mounting Plate

661582603
274-505-006: RNCC: 3 | RNVC: 2

15 Oct 2009

5340-66-142-6317
Access Cover

661426317
195066: RNCC: 3 | RNVC: 2

10 Dec 1996

5340-66-134-8327
Cap And Leade Plug

661348327
W30061: RNCC: 3 | RNVC: 2

9 Jul 1990

5340-66-123-1709
Webbing Strap

661231709
YA 435 638 00 80: RNCC: 3 | RNVC: 2

24 Sep 1985

5340-66-033-2969
Helical Compression Spring Seat

660332969
18-236: RNCC: 3 | RNVC: 2

26 Aug 1969

5340-66-093-6945
Access Cover

660936945
163P/0215/014 TYPE F: RNCC: 3 | RNVC: 2

26 May 1978

5340-66-148-3830
Sheild

661483830
F/2888-550-002E: RNCC: 3 | RNVC: 2
Q EDE VHSB F/2888-550-002E: RNCC: 5 | RNVC: 2

25 Feb 2002

5340-66-153-4089
Mounting Plate

661534089
15013100-01: RNCC: 3 | RNVC: 2

12 Aug 2005

5340-66-129-3200
Door Handle

661293200
A015461: RNCC: 3 | RNVC: 1
01DML/0004/002 ITEM 1: RNCC: 3 | RNVC: 2
DSD0004/02 SHEET 3 ITEM 1: RNCC: 5 | RNVC: 2

14 Apr 1988

5340-66-143-3552
Escutcheon Plate

661433552
1545-D-0119: RNCC: 3 | RNVC: 2

22 Apr 1998

5340-66-151-1041
Mounting Bracket

661511041
LTA-A09-022-001: RNCC: 3 | RNVC: 2
LTA-A09-022: RNCC: 5 | RNVC: 2

27 May 2003

5340-66-151-8739
General Purpose Resilient Mount

661518739
LTA08067: RNCC: 3 | RNVC: 2
SMB006-0400-7: RNCC: 5 | RNVC: 2

25 Nov 2003

5340-66-142-9672
Electronic Equipment Hardware Kit

661429672
DE530020036: RNCC: 3 | RNVC: 2
DE530020036: RNCC: 3 | RNVC: 2
MX-F330: RNCC: 5 | RNVC: 2

29 Apr 1997

5340-66-159-8440
Angle Bracket

661598440
571.10.09.452: RNCC: 3 | RNVC: 2

2 Mar 2012

5340-66-148-0662
Threaded Rod

661480662
74-0087-21: RNCC: 3 | RNVC: 2
200-9958: RNCC: 5 | RNVC: 1

4 Feb 2003

5340-66-029-8049
Rod End Clevis

660298049
T41: RNCC: 3 | RNVC: 2

26 Oct 1968

5340-66-142-6350
Bow Handle

661426350
197358: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-66-157-6916
Access Cover

661576916
000363-10 SHEET 1 & 2: RNCC: 3 | RNVC: 2

16 Feb 2009

5340-66-139-6274
Plate Cover

661396274
56W4-S118-PC 149: RNCC: 3 | RNVC: 1
56W4-S118-PC 149: RNCC: 3 | RNVC: 2

7 Jul 1994

5340-66-136-4904
Mounting Bracket

661364904
604/2/13729: RNCC: 3 | RNVC: 2

2 Mar 1993

5340-66-032-1632
Clamp

660321632
850554R91: RNCC: 3 | RNVC: 2

22 Apr 1969

5340-66-099-8153

5340-66-073-7734

5340-66-122-4420
Retaining Band

5340-66-090-1166
Corner Brace

5340-66-149-5283

5340-66-049-5878
Coil Clip

660495878
16934M1: RNCC: 3 | RNVC: 2
27539ITEM29: RNCC: 5 | RNVC: 2

18 May 1972

5340-66-154-3128
Dust And Moisture Seal Protective Cap-Plug

661543128
CP1: RNCC: 3 | RNVC: 2
1154382: RNCC: 5 | RNVC: 2

21 Apr 2006

5340-66-147-3536
Palm Servi Coupling

661473536
FD1603: RNCC: 3 | RNVC: 2

30 Mar 2001

5340-66-153-2240
Mounting Bracket

661532240
DE252180038: RNCC: 3 | RNVC: 2

22 Jun 2005

5340-66-147-7030
Port Seal

661477030
50292: RNCC: 3 | RNVC: 2

11 Oct 2001

5340-66-019-5752
Barrel Bolt

660195752
500: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-128-4696
Butt Hinge

661284696
HYG2327: RNCC: 3 | RNVC: 2

3 Dec 1987

5340-66-134-4284
Access Cover

661344284
704-48225-00: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-66-152-5106
Butt Hinge

661525106
DE251310020-2: RNCC: 3 | RNVC: 2

7 Mar 2005

5340-66-154-3453
Access Cover

661543453
ARLM0718-1: RNCC: 3 | RNVC: 2

2 May 2006

5340-66-143-3770
Pad Buffer

661433770
GS-E-1-28: RNCC: 3 | RNVC: 2

21 Apr 1998

5340-66-153-9501
Access Cover

661539501
M0228FH-AD30-03.00 NO.4: RNCC: 3 | RNVC: 2

21 Dec 2005

5340-66-148-4248
Battery Band

661484248
50-113-101: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-66-107-6057
Rod End Clevis

661076057
DE230010161: RNCC: 3 | RNVC: 2

2 Mar 1984

5340-66-151-8065
Mounting Bracket

661518065
DE251600002: RNCC: 3 | RNVC: 2
DE251600002: RNCC: 3 | RNVC: 2

30 Apr 2004

5340-66-079-2419
General Purpose Resilient Mount

660792419
13155: RNCC: 3 | RNVC: 2

27 Aug 1974

5340-66-153-0834
Mounting Bracket

661530834
HRV300015001: RNCC: 3 | RNVC: 2

1 Jun 2005

5340-66-159-0172
Loop Clamp

661590172
ENSA5516C18N: RNCC: 3 | RNVC: 2
NSA5516C18N: RNCC: 5 | RNVC: 2

7 Dec 2010

5340-66-151-1625
Webbing Strap

661511625
561598-DMOA: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-66-160-1132
Electronic Equipment Hardware Kit

661601132
PN107502: RNCC: 3 | RNVC: 2

3 Apr 2012

5340-66-158-7675
Bumper

661587675
BMA-A05-1700-01: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-66-142-8290
Hinge

661428290
96-141: RNCC: 3 | RNVC: 2
96-141: RNCC: 5 | RNVC: 2

27 Nov 1996

5340-66-153-4181
Mounting Plate

661534181
15013080: RNCC: 3 | RNVC: 2

15 Aug 2005

5340-66-159-8432
Mounting Bracket

661598432
BHB002: RNCC: 3 | RNVC: 2

2 Mar 2012

5340-66-155-0837
Mounting Bracket

661550837
17445704: RNCC: 3 | RNVC: 2
17445704: RNCC: 5 | RNVC: 2

28 Nov 2006

5340-66-146-9149
Mounting Bracket

661469149
ZG-108: RNCC: 3 | RNVC: 2

4 Oct 2000

5340-66-144-8013
Runner

661448013
35-27005-33: RNCC: 3 | RNVC: 2

2 Mar 1999

5340-66-156-5006
Spacing Threaded Standoff

661565006
10006752-10: RNCC: 3 | RNVC: 2

12 Dec 2007

5340-66-155-9542
Retaining Strap

661559542
P471-90000-123T07: RNCC: 3 | RNVC: 2
1088002: RNCC: 5 | RNVC: 2

10 Jul 2007

5340-66-150-4332
Lubricant Molykote

661504332
NO PRIMARY REF 66-150-4332: RNCC: 3 | RNVC: 2
04224057: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-146-9566
Upper Frame

661469566
AC404: RNCC: 3 | RNVC: 2
AC404: RNCC: 5 | RNVC: 2

20 Oct 2000

5340-66-146-3568
General Purpose Resilient Mount

661463568
M11050: RNCC: 3 | RNVC: 2
0901 9306: RNCC: 5 | RNVC: 2

13 Apr 2000

5340-66-160-6547
Mounting Plate

661606547
ID25-281: RNCC: 3 | RNVC: 2

3 Oct 2012

5340-66-150-7576
Eye Hook

661507576
AC915: RNCC: 3 | RNVC: 2

7 Jul 2003

5340-66-156-3986
Butt Hinge

661563986
15012202: RNCC: 3 | RNVC: 2

20 Nov 2007

5340-66-139-5675
Access Cover

661395675
56W4-S115PC21: RNCC: 3 | RNVC: 1
56W4-S115PC21: RNCC: 3 | RNVC: 2

28 Jun 1994

5340-66-146-2893
Deadman Switch

661462893
BM581046: RNCC: 3 | RNVC: 2

27 Mar 2000

5340-66-145-9673
Mounting Plate

661459673
0386Z0037: RNCC: 3 | RNVC: 2

9 Nov 2001

5340-66-144-9008
General Purpose Access Door

661449008
4871775-39: RNCC: 3 | RNVC: 2
SFP008AP0131: RNCC: 5 | RNVC: 2

27 Apr 1999

5340-66-126-3209
Angle Bracket

661263209
26-08210: RNCC: 3 | RNVC: 2

1 Feb 1991

5340-66-145-6316
Mounting Bracket

661456316
242790-100: RNCC: 3 | RNVC: 2

16 Nov 1999

5340-66-144-6482
Receptacle

661446482
HYM939: RNCC: 3 | RNVC: 2
666/001: RNCC: 5 | RNVC: 2

12 Feb 1999

5340-66-158-7565
Mounting Bracket

661587565
BMA-A12-0108-01: RNCC: 3 | RNVC: 2

28 Jul 2010

5340-66-105-4893
Mounting Plate

661054893
450015107: RNCC: 3 | RNVC: 2

27 Mar 1991

5340-66-153-4219
Mounting Bracket

661534219
2431015: RNCC: 3 | RNVC: 2
2431015: RNCC: 5 | RNVC: 2

16 Aug 2005

5340-66-161-1485
Mounting Plate

661611485
52392M: RNCC: 3 | RNVC: 2

4 Jul 2013

5340-66-153-4124
Mounting Plate

661534124
15012772-02: RNCC: 3 | RNVC: 2

12 Aug 2005

5340-66-160-4235
Manual Control Handle

661604235
BMA-A18-0087-01: RNCC: 3 | RNVC: 2

17 Jul 2012

5340-66-128-8478
Multiple Angle Bracket

661288478
AYG2677: RNCC: 3 | RNVC: 2
0066-00-000-2677: RNCC: C | RNVC: 1

30 Nov 1993

5340-66-146-3451
Front Panel Handle

661463451
2386-49880-00: RNCC: 3 | RNVC: 2

10 Apr 2000

5340-66-159-8241
Access Cover

661598241
BMA-A05-1427-01: RNCC: 3 | RNVC: 2

23 Feb 2012

5340-66-131-4931
Hook Strap

661314931
STRAP: RNCC: 3 | RNVC: 1
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

28 Oct 1988

5340-66-158-4105
Mounting Bracket

661584105
ADE(M)106-5/1B: RNCC: 3 | RNVC: 2

22 Dec 2009

5340-66-072-1786
Barrel Bolt

660721786
575-2IN: RNCC: 3 | RNVC: 1

5 Jul 1974

5340-66-138-7457
Dust And Moisture Seal Boot

661387457
196630-06450: RNCC: 3 | RNVC: 2

31 Mar 1994

5340-66-157-4233
Dust And Moisture Seal Protective Plug

661574233
MP-3615: RNCC: 3 | RNVC: 2
15017541: RNCC: 5 | RNVC: 2

18 Nov 2008

5340-66-135-7152
Loop Clamp

661357152
90462-05061: RNCC: 3 | RNVC: 2

7 Jan 1992

5340-66-122-3412
Mounting Bracket

661223412
15/4PB: RNCC: 3 | RNVC: 2

30 Apr 1987

5340-66-146-3452
Separator

661463452
2386-49990-00: RNCC: 3 | RNVC: 2

10 Apr 2000

5340-66-149-5766
Permanent Magnet

661495766
NO PRIMARY REF 66-149-5766: RNCC: 3 | RNVC: 2
QTMC26: RNCC: 5 | RNVC: 2

7 Apr 2003

5340-66-146-6118
Hardware Kit

661466118
A55-997-B2146-0A00: RNCC: 3 | RNVC: 2

7 Jun 2000

5340-66-134-8635
Dust And Moisture Seal Boot

661348635
985785: RNCC: 3 | RNVC: 2

9 Aug 1990

5340-66-116-5532
Retaining Strap

661165532
175GM: RNCC: 3 | RNVC: 2

6 Oct 1983

5340-66-151-1038
Mounting Plate

661511038
LTA-A05-224-001: RNCC: 3 | RNVC: 2
LTA-A05-224: RNCC: 5 | RNVC: 2

27 May 2003

5340-66-138-8190
Mounting Bracket

661388190
196640-01041-1: RNCC: 3 | RNVC: 2

21 Apr 1994

5340-66-157-4853
Angle Bracket

661574853
V0507-CE-1446: RNCC: 3 | RNVC: 2

28 Nov 2008

5340-66-017-9309
Surface Bolt

660179309
WELDOM 361: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-142-8890
Webbing Strap

661428890
43-0053-4: RNCC: 3 | RNVC: 2
43-0053-4: RNCC: 3 | RNVC: 2

22 Jan 1997

5340-66-145-4515
Uut Retainers

661454515
608/2/50880: RNCC: 3 | RNVC: 2

20 Sep 1999

5340-66-147-2566
Strainer Basket

661472566
DAF251SPA: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-66-141-3851
Access Cover

661413851
D50717: RNCC: 3 | RNVC: 2

12 May 1995

5340-66-145-3618
Dust And Moisture Seal Protective Plug

661453618
NA40-8A: RNCC: 3 | RNVC: 2
NA40-8A: RNCC: 5 | RNVC: 2

9 Sep 1999

5340-66-151-6305
Manual Control Handle

661516305
NO PRIMARY REF 66-151-6305: RNCC: 3 | RNVC: 2
EO11532B: RNCC: 5 | RNVC: 2

28 Aug 2003

5340-66-160-7748
Mounting Plate

661607748
15007647: RNCC: 3 | RNVC: 2

4 Dec 2012

5340-66-023-5304
Swivel Caster

660235304
L5520: RNCC: 3 | RNVC: 1
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1
L520: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-66-147-8746
Mounting Bracket

661478746
F/2888-550-029A: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-029A: RNCC: 5 | RNVC: 2

21 Nov 2001

5340-66-155-8407
Retaining Band

661558407
471-50809-21T02: RNCC: 3 | RNVC: 2
502658: RNCC: 5 | RNVC: 2

14 Jun 2007

5340-66-158-0244
Mortise Latch Set

661580244
7FA1200A01G13: RNCC: 3 | RNVC: 2

23 Jun 2009

5340-66-160-9320
Mounting Bracket

661609320
15020165: RNCC: 3 | RNVC: 2

13 Mar 2013

5340-66-159-1992
Webbing Strap

661591992
PUNC299: RNCC: 3 | RNVC: 2

29 Mar 2011

5340-66-157-8165
Cup Spring

661578165
611902377: RNCC: 3 | RNVC: 2

6 Apr 2009

5340-66-160-4359
General Purpose Resilient Mount

661604359
M5132142355: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-66-145-9619
Webbing Strap

661459619
A00-06: RNCC: 3 | RNVC: 2

30 Oct 2001

5340-66-160-5108
Pipe Hanger

661605108
SSP01.A: RNCC: 3 | RNVC: 2
SSP01.A: RNCC: 5 | RNVC: 2

27 Aug 2012

5340-66-060-8160
Dust And Moisture Seal Protective Cap-Plug

660608160
13CP: RNCC: 3 | RNVC: 2

7 Jul 1978

5340-66-147-2573
Rack Guide

661472573
DAG6040: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-66-147-2671
Overlay

661472671
DMM09HO(C-90): RNCC: 3 | RNVC: 2

15 Dec 2000

5340-66-134-1565
Mechanical Stop

661341565
356 4410: RNCC: 3 | RNVC: 2

19 Jun 1991

5340-66-147-0724
Mounting Bracket

661470724
SHA64: RNCC: 3 | RNVC: 2

19 Dec 2000

5340-66-160-7989
Angle Bracket

661607989
ZMTB24: RNCC: 3 | RNVC: 2
ZMTB24: RNCC: 5 | RNVC: 2

17 Dec 2012

5340-66-095-8966
Spring Tension Clip

660958966
3201B4-17: RNCC: 3 | RNVC: 2

10 Sep 1977

5340-66-159-1769
Retaining Strap

661591769
15009020: RNCC: 3 | RNVC: 2

22 Mar 2011

5340-66-148-3921
Cover

661483921
C11177: RNCC: 3 | RNVC: 2

8 Mar 2002

5340-66-154-8655
Cushioning Pad

661548655
471-50809-105T01: RNCC: 3 | RNVC: 2

21 Sep 2006

5340-66-155-1196
Retaining Strap

661551196
471-40205-117: RNCC: 3 | RNVC: 2
515041: RNCC: 5 | RNVC: 2

7 Dec 2006

5340-66-155-4180
Mounting Bracket

661554180
BME-A05-0241-01: RNCC: 3 | RNVC: 2

23 Mar 2007

5340-66-143-5633
Section Block Clamp

661435633
471-60803-124: RNCC: 3 | RNVC: 2
504081: RNCC: 3 | RNVC: 2

19 Sep 1997

5340-66-146-1534
Cover

661461534
537141 04: RNCC: 3 | RNVC: 2

1 Feb 2000

5340-66-110-5831
Synchro Clamp

661105831
MC21: RNCC: 3 | RNVC: 2
CLM21: RNCC: 5 | RNVC: 9

15 May 1981

5340-66-135-0373
Mounting Plate

661350373
400114007R: RNCC: 3 | RNVC: 2

12 Feb 1991

5340-66-147-8911
Cable Clamp

661478911
F/2888-550-029D: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-029D: RNCC: 5 | RNVC: 2

3 Dec 2001

5340-66-164-6284

5340-66-156-4929
Mounting Bracket

661564929
10006542: RNCC: 3 | RNVC: 2
70011/DS: RNCC: 5 | RNVC: 2
70011/DS: RNCC: 5 | RNVC: 2

11 Dec 2007

5340-66-149-1859
Bolt Plate Assembly

661491859
FS22878: RNCC: 3 | RNVC: 2
FS22878: RNCC: 5 | RNVC: 2

6 Mar 2003

5340-66-147-2335
Rod

661472335
008/304/GMOWS.3030.06: RNCC: 3 | RNVC: 2

29 Nov 2000

5340-66-122-6803
Loop Clamp

661226803
83AX637: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

19 Oct 1984

5340-66-084-4047
Espag Rod Assembly

660844047
ESPAG ROD: RNCC: 3 | RNVC: 1
LFMAOLF: RNCC: 5 | RNVC: 1

14 May 1985

5340-66-155-2245
Spacing Threaded Standoff

661552245
RAY172011-1: RNCC: 3 | RNVC: 2

24 Jan 2007

5340-66-153-4063
Mounting Bracket

661534063
15013071-01: RNCC: 3 | RNVC: 2

11 Aug 2005

5340-66-142-4595
Snap Hook

661424595
BOLT-SNAP-90MM: RNCC: 3 | RNVC: 1
616820: RNCC: 3 | RNVC: 2
616820: RNCC: 5 | RNVC: 2

2 Aug 1996

5340-66-014-3952
Padlock

660143952
234B: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-125-2743
Angle Bracket

661252743
DE580180996: RNCC: 3 | RNVC: 2

2 Jan 1986

5340-66-106-0268
Webbing Strap

661060268
DE230010393: RNCC: 3 | RNVC: 2

11 Aug 1980

5340-66-154-0322
Adapter

661540322
200500: RNCC: 3 | RNVC: 2

31 Jan 2006

5340-66-160-8851
Track Stop

661608851
DE253750025: RNCC: 3 | RNVC: 2

21 Feb 2013

5340-66-147-6472
Dust And Moisture Seal Protective Cap

661476472
A53-997-B2180-0J00: RNCC: 3 | RNVC: 2

18 Oct 2001

5340-66-142-9991
Antipilferage Seal

661429991
SEALANTIPILFERAGEPULLTIGHT: RNCC: 3 | RNVC: 1
PULLTIGHT: RNCC: 5 | RNVC: 2

22 Jan 1998

5340-66-164-7953

5340-66-164-7825

5340-66-164-7696

5340-66-138-8257
Mounting Bracket

661388257
196640-34100: RNCC: 3 | RNVC: 2

21 Apr 1994

5340-66-146-0811
Support Foot

661460811
AK30128: RNCC: 3 | RNVC: 2
AK30128: RNCC: 5 | RNVC: 2
AK30128: RNCC: 5 | RNVC: 2

7 Jan 2000

5340-66-066-4253
Angle Bracket

660664253
179347K: RNCC: 3 | RNVC: 2

7 Feb 1974

5340-66-104-1171
Retaining Strap

661041171
564M12: RNCC: 3 | RNVC: 2
01879153: RNCC: 5 | RNVC: 2

12 Feb 1971

5340-66-086-8443
Nonmetallic Bumper

660868443
101-759: RNCC: 3 | RNVC: 2

25 Mar 1975

5340-66-146-3447
Aluminium All Ring

661463447
2386-49240-00: RNCC: 3 | RNVC: 2
2386-49240-00: RNCC: 5 | RNVC: 2

10 Apr 2000

5340-66-150-2462
Hasp Staple

661502462
NO PRIMARY REF 66-150-2462: RNCC: 3 | RNVC: 2
04282303: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-151-8145
Threaded Rod End

661518145
LTA03039: RNCC: 3 | RNVC: 2

13 Oct 2003

5340-66-160-5901
Corrosion Preventive Anode

661605901
AW NAVY TYPE 4B (METRIC): RNCC: 3 | RNVC: 2
HSA002754: RNCC: 5 | RNVC: 2

17 Sep 2012

5340-66-159-2074
Access Cover

661592074
15017912: RNCC: 3 | RNVC: 2

4 Apr 2011

5340-66-156-2615
Mounting Plate

661562615
471-90429-710: RNCC: 3 | RNVC: 2
502106: RNCC: 5 | RNVC: 2

11 Oct 2007

5340-66-150-0635
Padlock

661500635
NO PRIMARY REF 66-150-0635: RNCC: 3 | RNVC: 2
03381511: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-142-6073
Extension Drawer Slide Section

661426073
44-79-22202-105: RNCC: 3 | RNVC: 2

7 Feb 1997

5340-66-159-8189
Angle Bracket

661598189
BMP-A21-3001-01: RNCC: 3 | RNVC: 2

23 Feb 2012

5340-66-141-0999
General Purpose Resilient Mount

661410999
1255870: RNCC: 3 | RNVC: 2

6 Sep 1995

5340-66-128-6380
Manual Control Lever

661286380
BYG5309: RNCC: 3 | RNVC: 2

12 Mar 1992

5340-66-036-9539
General Purpose Resilient Mount

660369539
SE11323: RNCC: 3 | RNVC: 2

7 Oct 1970

5340-66-154-8840
Access Cover

661548840
A1E31189: RNCC: 3 | RNVC: 2

28 Sep 2006

5340-66-154-9192
Mounting Plate

661549192
15014939: RNCC: 3 | RNVC: 2

6 Oct 2006

5340-66-141-7117
Retaining Clip

661417117
584 993 01 25.: RNCC: 3 | RNVC: 2
5849930125: RNCC: 3 | RNVC: 2

2 Jan 1996

5340-66-135-0892
Clamping Catch

661350892
450017105: RNCC: 3 | RNVC: 2

13 May 1991

5340-66-157-6314
Clamp

661576314
DE253280053: RNCC: 3 | RNVC: 2

23 Jan 2009

5340-66-041-4749
Loop Clamp

660414749
N313-12: RNCC: 3 | RNVC: 2
9463105106: RNCC: 5 | RNVC: 2
946.31.05.106: RNCC: 5 | RNVC: 2

25 Jun 1971

5340-66-128-7263
Mounting Bracket

661287263
740002: RNCC: 3 | RNVC: 2
HYL9817: RNCC: 5 | RNVC: 2
0068-00-000-9817: RNCC: C | RNVC: 1

26 Aug 1993

5340-66-150-3938
Butt Hinge

661503938
NO PRIMARY REF 66-150-3938: RNCC: 3 | RNVC: 2
00108818: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-060-1864
Bow Handle

660601864
SBC2: RNCC: 3 | RNVC: 2

18 Jun 1973

5340-66-154-0543
Mounting Bracket

661540543
DE251820018: RNCC: 3 | RNVC: 2

7 Feb 2006

5340-66-152-6217
Mounting Bracket

661526217
18568052: RNCC: 3 | RNVC: 2

25 Jan 2005

5340-66-150-7831
Rim Latch

661507831
LTA-A05-0342-01: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-66-126-2795
General Purpose Resilient Mount

661262795
6G5-44514-00-94: RNCC: 3 | RNVC: 2
6G5-44514-00-94: RNCC: 3 | RNVC: 2

16 Jan 1991

5340-66-150-0778
Expansion Shield

661500778
NO PRIMARY REF 66-150-0778: RNCC: 3 | RNVC: 2
02194008: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-100-2800
General Purpose Resilient Mount

661002800
MERB1-110: RNCC: 3 | RNVC: 2
147A5605-002: RNCC: 5 | RNVC: 2
1D411: RNCC: 5 | RNVC: 2

9 Feb 1979

5340-66-155-5126
General Purpose Resilient Mount

661555126
196630-05480: RNCC: 3 | RNVC: 2

4 Apr 2007

5340-66-106-8835
Handle Grip

661068835
DY1240: RNCC: 3 | RNVC: 2
1650-15-050-0483: RNCC: 6 | RNVC: 9

16 Nov 1984

5340-66-161-0300
Mortise Lock Set

661610300
565-50: RNCC: 3 | RNVC: 2

24 Apr 2013

5340-66-089-2953
Dust And Moisture Seal Protective Cap-Plug

660892953
P2407PL: RNCC: 3 | RNVC: 2

30 Aug 1975

5340-66-137-3093
Butt Hinge

661373093
340301: RNCC: 3 | RNVC: 1
1800MMX50.5MMX1MM THK: RNCC: 3 | RNVC: 2

13 Nov 1992

5340-66-149-0927
Mounting Plate

661490927
15000013: RNCC: 3 | RNVC: 2

19 Nov 2002

5340-66-151-0986
Mounting Bracket

661510986
LTA-V20-003: RNCC: 3 | RNVC: 2
LTA-V20-003-001: RNCC: 3 | RNVC: 2

15 May 2003

5340-66-132-6897
General Purpose Resilient Mount

661326897
M81FL: RNCC: 3 | RNVC: 2

17 May 1989

5340-66-078-0745
Access Door Hinge

660780745
19B1874: RNCC: 3 | RNVC: 2

23 Sep 1974

5340-66-113-8290
General Purpose Resilient Mount

661138290
778-1701-002: RNCC: 3 | RNVC: 2

28 Mar 1982

5340-66-164-8079

5340-66-150-8735
Mounting Bracket

661508735
69-15866: RNCC: 3 | RNVC: 2

14 Aug 2003

5340-66-140-5830
Cushioning Pad

661405830
004-351-03: RNCC: 3 | RNVC: 2

2 Nov 1995

5340-66-151-8067
Butt Hinge

661518067
DE251600016: RNCC: 3 | RNVC: 2
DE251600016: RNCC: 3 | RNVC: 2

30 Apr 2004

5340-66-160-6787
Bolt And Spacer Kit

661606787
DE25389000: RNCC: 3 | RNVC: 2

15 Oct 2012

5340-66-115-6188
Mounting Plate

661156188
576.10.09.143: RNCC: 3 | RNVC: 2

3 Oct 1995

5340-66-132-5437
General Purpose Resilient Mount

661325437
FP830013: RNCC: 3 | RNVC: 2

17 Mar 1989

5340-66-158-7708
General Purpose Access Door

661587708
BMA-A05-0748-02: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-66-154-5617
Door Lock Kits

661545617
935207: RNCC: 3 | RNVC: 2
01R-935207: RNCC: 5 | RNVC: 2

6 Jul 2006

5340-66-157-8619
Multiple Angle Bracket

661578619
BMA-A05-305-001: RNCC: 3 | RNVC: 2

24 Apr 2009

5340-66-150-5774
General Purpose Resilient Mount

661505774
NO PRIMARY REF 66-150-5774: RNCC: 3 | RNVC: 2
02872256: RNCC: 5 | RNVC: 2

16 Apr 2003

5340-66-156-9033
Mounting Plate

661569033
471-61006-231: RNCC: 3 | RNVC: 2
514464: RNCC: 5 | RNVC: 2

27 May 2008

5340-66-098-2477
Expansion Shield

660982477
NAC46: RNCC: 3 | RNVC: 2

22 Aug 1978

5340-66-155-7528
Angle Bracket

661557528
X50KB222A: RNCC: 3 | RNVC: 2

21 May 2007

5340-66-146-1783
Carrier Face

661461783
H70914-4-1: RNCC: 3 | RNVC: 2

11 Feb 2000

5340-66-139-6664
Mounting Plate

661396664
56W4-S104 PC37: RNCC: 3 | RNVC: 1
56W4-S104 PC37: RNCC: 3 | RNVC: 2

5 Jul 1994

5340-66-144-6261
Tee Hinge

661446261
GYD992: RNCC: 3 | RNVC: 2
008-992: RNCC: 3 | RNVC: 2

2 Feb 1999

5340-66-082-6400
Bow Handle

660826400
852S: RNCC: 3 | RNVC: 2
FWV10422: RNCC: 5 | RNVC: 2

29 Nov 1974

5340-66-156-7661
Mounting Plate

661567661
R0002-003: RNCC: 3 | RNVC: 2

26 Mar 2008

5340-66-160-2247
Quick Release Plunger

661602247
P10402-10: RNCC: 3 | RNVC: 2

2 May 2012

5340-66-159-0844
Mounting Bracket

661590844
471-RH000-114-T02: RNCC: 3 | RNVC: 2
1730137: RNCC: 5 | RNVC: 2

2 Feb 2011

5340-66-158-0725
Angle Bracket

661580725
1728-BH-1161-02: RNCC: 3 | RNVC: 2

28 Jul 2009

5340-66-159-9803
Mounting Bracket

661599803
1742863: RNCC: 3 | RNVC: 2
S471-17-01 ITEM 1-6: RNCC: 3 | RNVC: 2

16 Mar 2012

5340-66-149-1414
Angle Bracket

661491414
DE610640040: RNCC: 3 | RNVC: 1
450016: RNCC: 3 | RNVC: 2

6 Feb 2003

5340-66-154-3818
Mounting Bracket

661543818
DE252450011: RNCC: 3 | RNVC: 2

9 May 2006

5340-66-147-2591
Panel

661472591
DAP174A: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-66-151-6940
Mounting Bracket

661516940
LTA-A08-0055: RNCC: 3 | RNVC: 1
LTA-A08-0055-01: RNCC: 3 | RNVC: 2

21 Aug 2003

5340-66-154-3722
Multiple Angle Bracket

661543722
DE251540007: RNCC: 3 | RNVC: 2

8 May 2006

5340-66-147-2501
Socket

661472501
008/401/GMOWS.3030.04: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-66-086-8442
Nonmetallic Bumper

660868442
101-760: RNCC: 3 | RNVC: 2

25 Mar 1975

5340-66-058-9793
Nonmetallic Bumper

660589793
2-111: RNCC: 3 | RNVC: 2
2-111A: RNCC: 3 | RNVC: 2

18 Apr 1974

5340-66-153-2641
Mounting Bracket

661532641
A210 0280: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-024-2659
Buckle

5340-66-148-5048
Multiple Angle Bracket

661485048
OED-1749-18-22: RNCC: 3 | RNVC: 2

20 May 2002

5340-66-155-8491
Retaining Strap

661558491
471-40204-117: RNCC: 3 | RNVC: 2
515100: RNCC: 5 | RNVC: 2

15 Jun 2007

5340-66-161-2887
Heater Guard

661612887
15018966: RNCC: 3 | RNVC: 2

21 Aug 2013

5340-66-030-6142
Butt Hinge

660306142
BUTT HINGE: RNCC: 3 | RNVC: 1

4 Dec 1968

5340-66-147-2550
Cradle

661472550
DAC192: RNCC: 3 | RNVC: 2

12 Dec 2000

5340-66-141-0333
Slide Keeper

661410333
471-50832-109: RNCC: 3 | RNVC: 2

18 Aug 1995

5340-66-147-3970
Dirt And Liquid Deflector

661473970
0542377012: RNCC: 3 | RNVC: 2

23 Apr 2001

5340-66-158-8615
Mounting Plate

661588615
DE253600008: RNCC: 3 | RNVC: 2

8 Sep 2010

5340-66-148-5025
Track Stop

661485025
OED-1749-18-05-24: RNCC: 3 | RNVC: 2

20 May 2002

5340-66-141-1350
Loop Clamp

661411350
119-08-003: RNCC: 3 | RNVC: 2

3 Oct 1995

5340-66-136-3559
Clamp Assembly

661363559
DE(INT)193-7: RNCC: 3 | RNVC: 2

12 Sep 1992

5340-66-153-9844
Hand Crank

661539844
LW176: RNCC: 3 | RNVC: 2

11 Jan 2006

5340-66-160-8652
Mounting Plate

661608652
P10553-00-P-AA47: RNCC: 3 | RNVC: 2

13 Feb 2013

5340-66-132-0872
Frame

661320872
OMO-142443: RNCC: 3 | RNVC: 2
OM0-142377-4: RNCC: 5 | RNVC: 2

20 Apr 1989

5340-66-065-1433
Double Angle Bracket

660651433
DSD587-3: RNCC: 3 | RNVC: 2

18 Sep 1975

5340-66-081-2469
Key Blank

660812469
60: RNCC: 3 | RNVC: 2

6 Nov 1974

5340-66-144-1087
Access Door Hinge

661441087
BF006TDS: RNCC: 3 | RNVC: 2

19 Jun 1998

5340-66-146-3672
Webbing Strap

661463672
240591A-340: RNCC: 3 | RNVC: 2

13 Apr 2000

5340-66-146-4690
Catch Kit

661464690
199399: RNCC: 3 | RNVC: 2

18 May 2000

5340-66-151-0681
Spacing Threaded Standoff

661510681
LTA-A07-039-001: RNCC: 3 | RNVC: 2

1 May 2003

5340-66-145-1418
Angle Bracket

661451418
DC10-M3-1: RNCC: 3 | RNVC: 2

4 Jul 2002

5340-66-153-4797
Latch

661534797
1013307067: RNCC: 3 | RNVC: 2
1013307067: RNCC: 5 | RNVC: 2

25 Aug 2005

5340-66-035-2667
Dust And Moisture Seal Protective Cap

660352667
ML5454SH1PCM4: RNCC: 3 | RNVC: 2
67-174: RNCC: 5 | RNVC: 2

20 Apr 1970

5340-66-155-2233
Dust And Moisture Seal Protective Cover

661552233
C22664: RNCC: 3 | RNVC: 2

24 Jan 2007

5340-66-158-1598
Clamping Catch

661581598
1091.03: RNCC: 3 | RNVC: 2

8 Sep 2009

5340-66-157-2788
Mounting Plate

661572788
13MS29403M6: RNCC: 3 | RNVC: 2

25 Sep 2008

5340-66-149-0917
Mounting Bracket

661490917
15000323: RNCC: 3 | RNVC: 2

18 Nov 2002

5340-66-147-8059
Mounting Plate

661478059
NALM0006-1: RNCC: 3 | RNVC: 2

6 Dec 2001

5340-66-154-0683
Clamping Catch

661540683
4007-0001: RNCC: 3 | RNVC: 2

13 Feb 2006

5340-66-154-6178
Mounting Plate

661546178
471-50806-149: RNCC: 3 | RNVC: 2
509461: RNCC: 5 | RNVC: 2

25 Jul 2006

5340-66-145-9608
Webbing Strap

661459608
F00706: RNCC: 3 | RNVC: 2

26 Oct 2001

5340-66-161-1751
Mounting Bracket

661611751
15019550: RNCC: 3 | RNVC: 2

15 Jul 2013

5340-66-155-3065
Mounting Bracket

661553065
508885: RNCC: 3 | RNVC: 2

26 Feb 2007

5340-66-150-0642
Padlock

661500642
NO PRIMARY REF 66-150-0642: RNCC: 3 | RNVC: 2
03381698: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-148-5039
Access Cover

661485039
OED-1749-18-13: RNCC: 3 | RNVC: 2

17 May 2002

5340-66-154-8017
Mounting Bracket

661548017
471-60801-115: RNCC: 3 | RNVC: 2
506685: RNCC: 5 | RNVC: 2

7 Sep 2006

5340-66-152-3087
Extension Handle

661523087
28/029735: RNCC: 3 | RNVC: 2

5 Apr 2005

5340-66-021-3143
Spring Tension Clip

660213143
22106 7/16 IN.: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-160-1335
Mounting Bracket

661601335
90-5911-02: RNCC: 3 | RNVC: 2

5 Apr 2012

5340-66-146-7804
Stator

661467804
RR AB2 2205A: RNCC: 3 | RNVC: 2

18 Sep 2000

5340-66-153-9557
Hinge

661539557
AQ90-10-63.00/ITEM:7: RNCC: 3 | RNVC: 2

3 Jan 2006

5340-66-158-6940
Access Cover

661586940
537 00 07-02: RNCC: 3 | RNVC: 2
537 00 07-02: RNCC: 5 | RNVC: 2

9 Jun 2010

5340-66-154-0307
Gripper Shield

661540307
200831: RNCC: 3 | RNVC: 2

31 Jan 2006

5340-66-150-4670
Extension Handle

661504670
NO PRIMARY REF 66-150-4670: RNCC: 3 | RNVC: 2
03112258: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-155-4802
Module Frame

661554802
11250: RNCC: 3 | RNVC: 2
11250: RNCC: 5 | RNVC: 2

30 Mar 2007

5340-66-118-7159
Butt Hinge Leaf

661187159
4166165051: RNCC: 3 | RNVC: 2
4166165051: RNCC: 3 | RNVC: 2

5 Apr 1984

5340-66-142-9685
Clamp Plate

661429685
015036: RNCC: 3 | RNVC: 2

29 Apr 1997

5340-66-088-4956
Turnbuckle

660884956
47969: RNCC: 3 | RNVC: 2

4 Feb 1971

5340-66-160-3190
Mounting Plate

661603190
DMS183003: RNCC: 3 | RNVC: 2

5 Jun 2012

5340-66-160-2586
Angle Bracket

661602586
ARLM0805-1: RNCC: 3 | RNVC: 2

14 May 2012

5340-66-137-8678
Expansion Plug

661378678
105311-01090: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-66-141-7718
Access Cover

661417718
166 X 29: RNCC: 3 | RNVC: 2
166X29: RNCC: 3 | RNVC: 2

19 Jan 1996

5340-66-146-7807
Suction Chamber

661467807
ST AB2 2340: RNCC: 3 | RNVC: 2

18 Sep 2000

5340-66-148-8798
Mounting Bracket

661488798
EH0393: RNCC: 3 | RNVC: 2
EH0393: RNCC: 5 | RNVC: 2

12 Nov 2002

5340-66-097-7741
Clamping Catch

660977741
TMGB248: RNCC: 3 | RNVC: 2

14 May 1978

5340-66-145-5797
Mounting Bracket

661455797
DE250980312: RNCC: 3 | RNVC: 2

7 Oct 1999

5340-66-133-4856
M Mounting Bracket

661334856
450409001-01: RNCC: 3 | RNVC: 2

19 Sep 1989

5340-66-142-9945
Double Angle Bracket

661429945
ADE(M)59-224: RNCC: 3 | RNVC: 2

1 May 1997

5340-66-139-1273
Loop Clamp

661391273
83AX660: RNCC: 3 | RNVC: 2
0050-00-008-3660: RNCC: C | RNVC: 1

15 Apr 1994

5340-66-147-2197
Coalescer Assembly

661472197
000/300/GMOWS.3030.2.01: RNCC: 3 | RNVC: 2

24 Nov 2000

5340-66-156-5201
Rod End Clevis

661565201
471-62810-122: RNCC: 3 | RNVC: 2
501401: RNCC: 5 | RNVC: 2

18 Dec 2007

5340-66-044-9413
Spring Tension Clip

660449413
CSP112-14: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

20 Nov 1971

5340-66-159-5787
Antipilferage Seal

661595787
BA07712: RNCC: 3 | RNVC: 2

11 Oct 2011

5340-66-016-2592
Padlock

660162592
1K11: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-153-9129
Butt Hinge

661539129
H00184IL: RNCC: 3 | RNVC: 2
H00184IL: RNCC: 5 | RNVC: 2

5 Dec 2005

5340-66-031-9415
Nonmetallic Bumper

660319415
ADE(W)67-501 ISSUE 2: RNCC: 3 | RNVC: 2

7 Feb 1960

5340-66-136-3517
Mounting Bracket

661363517
675/1/39862/000: RNCC: 3 | RNVC: 2

18 Aug 1992

5340-66-151-3425
Angle Bracket

661513425
RAY171000-29: RNCC: 3 | RNVC: 2

24 Mar 2004

5340-66-154-2418
Spring Holder

661542418
S0003A1E1833-712: RNCC: 3 | RNVC: 2

4 Apr 2006

5340-66-147-6658
Webbing Strap

661476658
12756504: RNCC: 3 | RNVC: 2

12 Nov 2001

5340-66-155-6013
Metal Grille

661556013
471-21212-103: RNCC: 3 | RNVC: 2
508137: RNCC: 5 | RNVC: 2

24 Apr 2007

5340-66-157-4192
Access Cover

661574192
471-51805-148: RNCC: 3 | RNVC: 2
5254111: RNCC: 5 | RNVC: 2

14 Nov 2008

5340-66-153-6681
Webbing Strap

661536681
9125D05045001-001: RNCC: 3 | RNVC: 2

11 Oct 2005

5340-66-150-2042
Support Hook

661502042
NO PRIMARY REF 66-150-2042: RNCC: 3 | RNVC: 2
04964304: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-135-2148
Snap Hook

661352148
SNAP HOOK DOG 29MM: RNCC: 3 | RNVC: 1
JCE 0020: RNCC: 5 | RNVC: 2

17 Apr 1992

5340-66-151-2441
Mounting Plate

661512441
503W02001-1: RNCC: 3 | RNVC: 2

27 Jul 2004

5340-66-089-2552
General Purpose Resilient Mount

660892552
080-10507: RNCC: 3 | RNVC: 2

10 Oct 1975

5340-66-152-5617
Nonmetallic Bumper

661525617
HRV010202004: RNCC: 3 | RNVC: 2

5 Nov 2004

5340-66-132-7382
Lock Plate

5340-66-154-7612
Access Cover

661547612
471-90552-505: RNCC: 3 | RNVC: 2
524227: RNCC: 5 | RNVC: 2

30 Aug 2006

5340-66-154-7033
Mounting Bracket

661547033
471-51806-11: RNCC: 3 | RNVC: 2
504325: RNCC: 5 | RNVC: 2

16 Aug 2006

5340-66-154-3794
Barrel Asse Cradle

661543794
DE251550002: RNCC: 3 | RNVC: 2

8 May 2006

5340-66-126-2369
Clamp

661262369
6E5-82594-00: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-66-156-6243
Rim Latch Set

661566243
WCB1000: RNCC: 3 | RNVC: 2

13 Feb 2008

5340-66-139-6320
Access Cover

661396320
56W4-S118 PC 229: RNCC: 3 | RNVC: 1
56W4-S118 PC 229: RNCC: 3 | RNVC: 2

8 Jul 1994

5340-66-154-2148
Spring Holder

661542148
S0054A1E1838/712: RNCC: 3 | RNVC: 2

24 Mar 2006

5340-66-160-6549
Mounting Bracket

661606549
ID25-285: RNCC: 3 | RNVC: 2

3 Oct 2012

5340-66-157-0908
Dust And Moisture Seal Protective Cap

661570908
20U-70-42530: RNCC: 3 | RNVC: 2
20U-70-42530: RNCC: 5 | RNVC: 2

22 Jul 2008

5340-66-143-4291
Mounting Plate

661434291
492456: RNCC: 3 | RNVC: 2

24 Apr 1998

5340-66-154-3436
Snap Hook

661543436
RF532: RNCC: 3 | RNVC: 2

2 May 2006

5340-66-134-8332
Toggle Latch

661348332
360206: RNCC: 3 | RNVC: 2

6 Jul 1990

5340-66-145-1406
Butt Hinge

661451406
TD30-2-M3-0: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-66-158-2241
Butt Hinge

661582241
K11477-264: RNCC: 3 | RNVC: 2

2 Oct 2009

5340-66-146-5794
Ballast Plate

661465794
BALLAST PLATE: RNCC: 3 | RNVC: 2

26 Jul 2000

Load More Results