What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is a Hasp Staple?

A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

Hardware, Commercial - Australia (AU)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Australia (AU) - NCB is 66

Page 23 of 29

NSN Format for Hardware, Commercial
Codified by Australia

53	40	66	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Australia (AU)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 53 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 78 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 109 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 25 Items
Holder,Spring 26 Items
What is a Compression Cup? 11 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 43 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 85 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 54 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 27 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 249 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 36 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 87 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 39 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 11 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 16 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 15 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Rim Latch? 18 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Rim Lock? 13 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 12 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 17 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 17 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 18 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 103 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 11 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 59 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 14 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 14 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Plug Button? 12 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Corrosion Preventive Anode? 27 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 78 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 268 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 88 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 70 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 36 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 40 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 41 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Plain Solid Disk? 41 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 12 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 608 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 57 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 54 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 317 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 48 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 40 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 83 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Quick Release Plunger? 17 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 65 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 24 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 14 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 22 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 49 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 19 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 151 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 15 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 444 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 128 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 42 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 53 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 25 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 201 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 33 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 133 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 42 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 54 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Strapping? 28 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 75 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Screw Thread Insert And Tool Assortment? 18 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 28 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 18 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 740 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 11 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 14 Items
What is an Antipilferage Seal? 27 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 129 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Seal Retaining Plate? 29 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 47 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1862 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 15 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 11 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 10 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 766 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 27 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 65 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 79 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 71 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 22 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 12 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 14 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 35 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 50 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 28 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 15 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 20 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 11 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 83 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 138 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 393 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 38 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 11 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 22 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
What is a Key Blank? 22 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 10 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 114 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 11 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 20 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 12 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is a Bumper? 74 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 23 of 29

5340-66-147-9202
Bearing C Test Kit

661479202
1963429: RNCC: 3 | RNVC: 2

20 Dec 2001

5340-66-136-4069
Access Cover

661364069
640/1/28307: RNCC: 3 | RNVC: 2

27 Jan 1993

5340-66-146-9004
Bracket Front

661469004
DCH-01: RNCC: 3 | RNVC: 2

27 Sep 2000

5340-66-154-6308
Access Cover

661546308
6-160-3002: RNCC: 3 | RNVC: 2
6-160-3002: RNCC: 5 | RNVC: 2

31 Jul 2006

5340-66-154-6116
Lock Bar

661546116
008-02006-001: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-66-152-7374
Abrasive Projectile

661527374
A045X20: RNCC: 3 | RNVC: 2

17 May 2005

5340-66-123-4485
Hinge Assy

661234485
33-31080-13: RNCC: 3 | RNVC: 2

13 Dec 1985

5340-66-143-9266
Access Door Hinge

661439266
501-418: RNCC: 3 | RNVC: 2

10 Sep 1997

5340-66-157-6693
Access Cover

661576693
D-2734: RNCC: 3 | RNVC: 2

5 Feb 2009

5340-66-144-0212
Mounting Kit Antenn

661440212
VK5P: RNCC: 3 | RNVC: 2

12 Jan 1998

5340-66-038-8021
Luggage Catch

660388021
ADE(M)76-2: RNCC: 3 | RNVC: 2

20 Apr 1971

5340-66-156-8952
Support Hook

661568952
71394: RNCC: 3 | RNVC: 2
71394: RNCC: 5 | RNVC: 2

26 May 2008

5340-66-155-8162
Retaining Band

661558162
471-50831-1: RNCC: 3 | RNVC: 2
510226: RNCC: 5 | RNVC: 2

6 Jun 2007

5340-66-090-4735
Retaining Strap

660904735
564-0: RNCC: 3 | RNVC: 2
01878256: RNCC: 5 | RNVC: 2

10 Oct 1975

5340-66-155-4374
Sheet

661554374
20Y-46-42460: RNCC: 3 | RNVC: 2
20Y-46-42460: RNCC: 5 | RNVC: 2

27 Mar 2007

5340-66-133-3415
Mounting Bracket

661333415
2A10-0164: RNCC: 3 | RNVC: 2
2A10-0164: RNCC: 5 | RNVC: 2

25 Feb 1997

5340-66-127-6520
Access Cover

661276520
SS22/P075/013/101: RNCC: 3 | RNVC: 2
163P/0325/014: RNCC: 5 | RNVC: 1

11 Nov 1986

5340-66-161-0523
Access Cover

661610523
ZZPFCX4-A010: RNCC: 3 | RNVC: 2

7 May 2013

5340-66-150-5062
Strap Hinge Leaf

661505062
NO PRIMARY REF 66-150-5062: RNCC: 3 | RNVC: 2
04081407: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-125-3751
Butt Hinge

5340-66-156-4527
Angle Bracket

661564527
15013485-04: RNCC: 3 | RNVC: 2

29 Nov 2007

5340-66-141-6110
Stop Plate

661416110
008-386: RNCC: 3 | RNVC: 2
008-386: RNCC: 3 | RNVC: 2

25 Sep 1996

5340-66-146-0889
Mounting Plate

661460889
438 4148-02: RNCC: 3 | RNVC: 2

13 Jan 2000

5340-66-150-5802
Access Door Hinge

661505802
NO PRIMARY REF 66-150-5802: RNCC: 3 | RNVC: 2
04090304: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-131-6589
Shroud

661316589
640/02/30507: RNCC: 3 | RNVC: 2

23 Mar 1989

5340-66-155-1224
Seal Retaining Plate

661551224
1414-11-03/694690: RNCC: 3 | RNVC: 2

8 Dec 2006

5340-66-139-9989
Pallet Stop Plate

661399989
12760-B-301: RNCC: 3 | RNVC: 1
12760-B-301/4: RNCC: 3 | RNVC: 2

23 Aug 1994

5340-66-153-9604
Mounting Bracket

661539604
DE251820021: RNCC: 3 | RNVC: 2

4 Jan 2006

5340-66-106-4932
Permanent Magnet

661064932
822: RNCC: 3 | RNVC: 2

14 Jul 1980

5340-66-130-2801
Mending Plate

661302801
MEA 1307-3: RNCC: 3 | RNVC: 2

15 Feb 1988

5340-66-158-9257
Spacing Threaded Standoff

661589257
TF01921-1: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-66-138-6470
Access Cover

661386470
4-0-101157 ITEM 6: RNCC: 3 | RNVC: 2
B831F342/6: RNCC: 3 | RNVC: 2

8 Mar 1994

5340-66-061-7579
Turnbuckle

660617579
AL547: RNCC: 3 | RNVC: 1

7 Jan 1974

5340-66-092-9677
General Purpose Access Door

660929677
918808-5: RNCC: 3 | RNVC: 2

9 Sep 1976

5340-66-155-4317
Retaining Clip

661554317
208-53-12680: RNCC: 3 | RNVC: 2
208-53-12680: RNCC: 5 | RNVC: 2

26 Mar 2007

5340-66-154-0321
Adapter

661540321
200749: RNCC: 3 | RNVC: 2

31 Jan 2006

5340-66-141-5525
Mounting Bracket

661415525
608/2/44067/011: RNCC: 3 | RNVC: 2

10 Jul 1996

5340-66-081-3370
Dust And Moisture Seal Protective Cap

660813370
R165: RNCC: 3 | RNVC: 2

26 Sep 1974

5340-66-124-6452
Angle Bracket

661246452
A300719-1: RNCC: 3 | RNVC: 2

10 Jun 1986

5340-66-159-8741
Support Hook

661598741
1138.95: RNCC: 3 | RNVC: 1
1138.95-P1: RNCC: 3 | RNVC: 2

7 Mar 2012

5340-66-154-5343
Angle Bracket

661545343
004-01547-002: RNCC: 3 | RNVC: 2

28 Jun 2006

5340-66-113-6651
Protective Tooling

661136651
TOOLING FOR 5340-66-101-5718: RNCC: 3 | RNVC: 2

28 Mar 1982

5340-66-159-5849
Mounting Bracket

661595849
STS-A05-3005-01: RNCC: 3 | RNVC: 2
STS-A05-3005: RNCC: 7 | RNVC: 2

14 Oct 2011

5340-66-158-1664
Mounting Bracket

661581664
BDI 30400-6-4-1: RNCC: 3 | RNVC: 2

11 Sep 2009

5340-66-143-4286
Holder

661434286
492440: RNCC: 3 | RNVC: 2

24 Apr 1998

5340-66-139-0348
Plastic Bush

661390348
9754-10991382: RNCC: 3 | RNVC: 2
10991382: RNCC: 3 | RNVC: 2

28 Jan 1994

5340-66-154-4028
Mounting Bracket

661544028
471-60801-185: RNCC: 3 | RNVC: 2
471-60801-185: RNCC: 5 | RNVC: 2

16 May 2006

5340-66-143-3617
Cover

661433617
142225: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-66-156-8789
General Purpose Resilient Mount

661568789
M10253055: RNCC: 3 | RNVC: 2
0132 0686: RNCC: 5 | RNVC: 2

16 May 2008

5340-66-156-1611
Turnbuckle

661561611
RF1539: RNCC: 3 | RNVC: 2
RF1539: RNCC: 5 | RNVC: 2

11 Sep 2007

5340-66-086-8859
Double Angle Bracket

660868859
ADE(W)126-9: RNCC: 3 | RNVC: 2

20 Apr 1975

5340-66-131-6625
Left-Hand Bracket

661316625
700/2/24623: RNCC: 3 | RNVC: 2

23 Mar 1989

5340-66-141-2174
Mounting Bracket

661412174
97.0042.7899: RNCC: 3 | RNVC: 2

1 Nov 1995

5340-66-158-7725
Mounting Plate

661587725
BMA-A05-0508-01: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-66-150-5801
Access Door Hinge

661505801
NO PRIMARY REF 66-150-5801: RNCC: 3 | RNVC: 2
04090207: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-146-2053
Mounting Bracket

661462053
487 0109-09: RNCC: 3 | RNVC: 2

14 Feb 2000

5340-66-091-8700
Angle Bracket

660918700
330250: RNCC: 3 | RNVC: 2

12 Jun 1976

5340-66-147-7894
Dust And Moisture Seal Protective Cap

661477894
EK 557: RNCC: 3 | RNVC: 2
Q PAL EK 557: RNCC: 5 | RNVC: 2
EK 557: RNCC: 5 | RNVC: 2

24 Sep 2001

5340-66-154-6377
Mounting Plate

661546377
471-20201-102: RNCC: 3 | RNVC: 2
511812: RNCC: 5 | RNVC: 2

1 Aug 2006

5340-66-150-8220
Double Angle Bracket

661508220
BDI 8215: RNCC: 3 | RNVC: 2
BDI 8215: RNCC: 3 | RNVC: 2

18 Aug 2003

5340-66-158-4678

5340-66-150-4010
Strapping Seal

661504010
NO PRIMARY REF 66-150-4010: RNCC: 3 | RNVC: 2
01790500: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-158-1040
Access Cover

661581040
471-PPJ00-101: RNCC: 3 | RNVC: 2
1707462: RNCC: 5 | RNVC: 2

19 Aug 2009

5340-66-158-0160
Mounting Plate

661580160
1728-BH-0872-03: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-66-144-6478
Butt Hinge

661446478
28-0361: RNCC: 3 | RNVC: 2
HYM1067: RNCC: 3 | RNVC: 2

16 Feb 1999

5340-66-161-2647
Butt Hinge

661612647
1600-03-0304C1-01-P1: RNCC: 3 | RNVC: 2
QVRL1600030304C101P1: RNCC: 5 | RNVC: 2

12 Aug 2013

5340-66-159-5268
Bumper

661595268
1100-02-0400C1-01: RNCC: 3 | RNVC: 2

30 Aug 2011

5340-66-106-4074
Dust And Moisture Seal Protective Cap-Plug

661064074
C0005-45: RNCC: 3 | RNVC: 2

14 Jul 1980

5340-66-155-7501
Mounting Bracket

661557501
X50QK525B: RNCC: 3 | RNVC: 2

21 May 2007

5340-66-153-7786
Angle Bracket

661537786
846780-5: RNCC: 3 | RNVC: 2
846780-5: RNCC: 5 | RNVC: 2
846780-5: RNCC: 5 | RNVC: 2

28 Oct 2005

5340-66-147-8446
Shock Mount Pad

661478446
NALM00068-5: RNCC: 3 | RNVC: 2
NALM00068-5: RNCC: 5 | RNVC: 1

11 Mar 2002

5340-66-158-0881
Return Spr Retainer

661580881
79500372: RNCC: 3 | RNVC: 2
YK-500372: RNCC: 5 | RNVC: 2

7 Aug 2009

5340-66-150-0634
Padlock

661500634
NO PRIMARY REF 66-150-0634: RNCC: 3 | RNVC: 2
04649626: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-155-8422
Angle Bracket

661558422
471-51805-117T01: RNCC: 3 | RNVC: 2
504270: RNCC: 5 | RNVC: 2

14 Jun 2007

5340-66-153-9795
Mounting Bracket

661539795
3A-500002-1-16: RNCC: 3 | RNVC: 2

10 Jan 2006

5340-66-150-4037
Strapping

661504037
NO PRIMARY REF 66-150-4037: RNCC: 3 | RNVC: 2
05666313: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-111-4656
Coupling Pin Cap

661114656
GD62R5-3000: RNCC: 3 | RNVC: 2

12 Jun 1981

5340-66-157-4513
Mounting Plate

661574513
468-02-0202C-01: RNCC: 3 | RNVC: 2

25 Nov 2008

5340-66-157-4986
Mounting Plate

661574986
V0507-CE-1501: RNCC: 3 | RNVC: 2

2 Dec 2008

5340-66-155-8954
Mounting Plate

661558954
471-60801-177: RNCC: 3 | RNVC: 2
506753: RNCC: 5 | RNVC: 2

26 Jun 2007

5340-66-160-1137
Electronic Equipment Hardware Kit

661601137
PN107505: RNCC: 3 | RNVC: 2

3 Apr 2012

5340-66-143-7272
Assembly Bracket

661437272
658/1/06014/000: RNCC: 3 | RNVC: 2

2 Jul 1997

5340-66-144-8327
Permanent Magnet

661448327
MG1-A20-003-001: RNCC: 3 | RNVC: 2
224808-M: RNCC: 5 | RNVC: 2

24 Mar 1999

5340-66-154-7880
Slide Plate

661547880
15004449: RNCC: 3 | RNVC: 2

6 Sep 2006

5340-66-155-8785
Mounting Bracket

661558785
471-50820-118: RNCC: 3 | RNVC: 2
506210: RNCC: 5 | RNVC: 2

22 Jun 2007

5340-66-139-9635
Lug Vertical Lift

661399635
5497305-0001: RNCC: 3 | RNVC: 2

10 Oct 1994

5340-66-150-4029
Strapping

661504029
NO PRIMARY REF 66-150-4029: RNCC: 3 | RNVC: 2
05775110: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-134-9029
Clamp Bracket

661349029
675/1/34670/000: RNCC: 3 | RNVC: 2

20 Sep 1990

5340-66-143-8448
Webbing Strap

661438448
502AMR357-1: RNCC: 3 | RNVC: 2
502AMR357 ISSUE 2: RNCC: 5 | RNVC: 2

19 Aug 1997

5340-66-085-2406
Handle Grip

660852406
381489: RNCC: 3 | RNVC: 2

25 Mar 1975

5340-66-155-3386
Double Angle Bracket

661553386
DE252540049: RNCC: 3 | RNVC: 2

7 Mar 2007

5340-66-147-8519
Angle Bracket

661478519
F/2888-550-035M: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-035M: RNCC: 5 | RNVC: 2

24 Sep 2001

5340-66-155-8389
Spring Holder

661558389
471-40204-158: RNCC: 3 | RNVC: 2
514994: RNCC: 5 | RNVC: 2

14 Jun 2007

5340-66-147-8577
Stowage Cabin Panel

661478577
F/2888-550-034H: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-034H: RNCC: 5 | RNVC: 2

25 Sep 2001

5340-66-157-5169
Retaining Strap

661575169
V0507-CE-1419: RNCC: 3 | RNVC: 2

8 Dec 2008

5340-66-155-4407
Access Cover

661554407
22U-06-23320: RNCC: 3 | RNVC: 2
22U-06-23320: RNCC: 5 | RNVC: 2

27 Mar 2007

5340-66-026-1739
Retaining Band

660261739
ADE(V)94-357-1: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-141-4317
Mounting Plate

661414317
004-009: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-66-128-7997
Mounting Plate

661287997
02303: RNCC: 3 | RNVC: 2

12 Oct 1993

5340-66-154-8034
Guard

661548034
471-60801-112T01: RNCC: 3 | RNVC: 2
506681: RNCC: 5 | RNVC: 2

7 Sep 2006

5340-66-146-0863
Brace Bracket

661460863
438 0525-03: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-66-158-2500
Mounting Bracket

661582500
HYG4026: RNCC: 3 | RNVC: 2

12 Oct 2009

5340-66-138-6365
General Purpose Resilient Mount

661386365
V32A8080-06: RNCC: 3 | RNVC: 2
V3CA8080-06: RNCC: 3 | RNVC: 2
B831F1287/3: RNCC: 5 | RNVC: 2

2 Mar 1994

5340-66-125-4982
Manual Control Lever

661254982
175-61-13930: RNCC: 3 | RNVC: 2

2 May 1986

5340-66-147-2508
Lower Rinse Bracket

661472508
6032(MOD.DX): RNCC: 3 | RNVC: 2

8 Dec 2000

5340-66-125-3630
Butt Hinge

661253630
DE580160115-5: RNCC: 3 | RNVC: 2

18 Apr 1986

5340-66-149-0884
General Purpose Resilient Mount

661490884
15000292: RNCC: 3 | RNVC: 2

19 Nov 2002

5340-66-154-6973
Mounting Plate

661546973
DE252580028: RNCC: 3 | RNVC: 2

15 Aug 2006

5340-66-143-6430
T Bracket

661436430
VII(01)(STBD AFT): RNCC: 3 | RNVC: 2

7 Oct 1997

5340-66-159-0542

5340-66-060-0439
Rod End Connector

5340-66-157-7732

5340-66-158-1840
Mounting Bracket

661581840
TO162001: RNCC: 3 | RNVC: 2

17 Sep 2009

5340-66-125-3186
General Purpose Access Door

661253186
DE580160620: RNCC: 3 | RNVC: 2

7 Mar 1986

5340-66-131-6883
Strap-Rope-Cab Loop

661316883
3-386-0717-7: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-66-136-4902
Spacing Threaded Standoff

661364902
604/2/11096: RNCC: 3 | RNVC: 2

2 Mar 1993

5340-66-154-8166
Mounting Bracket

661548166
471-50806-144T02: RNCC: 3 | RNVC: 2
509456: RNCC: 5 | RNVC: 2

12 Sep 2006

5340-66-156-9072
Loop Clamp

661569072
510-28/B: RNCC: 3 | RNVC: 2

28 May 2008

5340-66-149-0162
Lateral Restraint

661490162
2902-DWG-58-M-9117#3: RNCC: 3 | RNVC: 2
2902-DWG-58-M-9117#3: RNCC: 5 | RNVC: 2

18 Sep 2002

5340-66-150-0694
Rim Lock Set

661500694
NO PRIMARY REF 66-150-0694: RNCC: 3 | RNVC: 2
04070201: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-150-5139
Mounting Plate

661505139
NO PRIMARY REF 66-150-5139: RNCC: 3 | RNVC: 2
00453000: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-088-1627
Barrel Bolt

660881627
1213-25107: RNCC: 3 | RNVC: 2
04048602: RNCC: 5 | RNVC: 2

7 Apr 1975

5340-66-078-7841
Expansion Plug

660787841
200393: RNCC: 3 | RNVC: 2

26 Sep 1974

5340-66-093-1637
Loop Clamp

5340-66-146-0813
Bearing End Cover

661460813
AK35015: RNCC: 3 | RNVC: 2
AK85015: RNCC: 5 | RNVC: 2
AK85015: RNCC: 5 | RNVC: 2

7 Jan 2000

5340-66-146-1366
Mounting Bracket

661461366
TYPE V1(02)(STBDFWD): RNCC: 3 | RNVC: 2

27 Jan 2000

5340-66-156-6246
Mechanical Stop

661566246
DS012: RNCC: 3 | RNVC: 2

13 Feb 2008

5340-66-153-9043
Swivel Caster

661539043
21-3-0890: RNCC: 3 | RNVC: 2
S872: RNCC: 5 | RNVC: 2

30 Nov 2005

5340-66-148-3824
Unit Sign Holder

661483824
F/2888-500-001: RNCC: 3 | RNVC: 2
Q EDE VHUSH F/2888-500-001: RNCC: 5 | RNVC: 2

27 Feb 2002

5340-66-147-3830
Screen

661473830
418/7/51772/001: RNCC: 3 | RNVC: 2

12 Apr 2001

5340-66-154-7418
Webbing Strap

661547418
10006014-040: RNCC: 3 | RNVC: 2
10006014-040: RNCC: 5 | RNVC: 2

28 Aug 2006

5340-66-160-6535
Mounting Bracket

661606535
ID25-237: RNCC: 3 | RNVC: 2

3 Oct 2012

5340-66-133-3194
Mounting Plate

661333194
HAA95/399/D3-3: RNCC: 3 | RNVC: 2

3 Dec 1996

5340-66-144-4106
Clamp

661444106
73156-3-18: RNCC: 3 | RNVC: 2

7 Sep 1998

5340-66-147-4088
Pivoting Catch

5340-66-139-1017
Mounting Bracket

661391017
640/2/28294: RNCC: 3 | RNVC: 2

8 Mar 1994

5340-66-150-7841
Multiple Angle Bracket

661507841
LTA-A05-222-001: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-66-142-8214
Mounting Bracket

661428214
658/2/05993/000: RNCC: 3 | RNVC: 2

13 Jan 1997

5340-66-158-6778
Angle Bracket

661586778
RAY184004-1: RNCC: 3 | RNVC: 2
RAY184004-1: RNCC: 5 | RNVC: 2

1 Jun 2010

5340-66-147-7574
Clevis Bracket

661477574
6671263-1: RNCC: 3 | RNVC: 2
6671263-1: RNCC: C | RNVC: 1

9 Aug 2001

5340-66-144-6351
Support Hook

661446351
HMO-K: RNCC: 3 | RNVC: 2
HYM995: RNCC: 5 | RNVC: 2

8 Feb 1999

5340-66-160-3700
Access Cover

661603700
R-50-001-1: RNCC: 3 | RNVC: 2

26 Jun 2012

5340-66-123-4552
Hinge

661234552
33-31465-9: RNCC: 3 | RNVC: 2

13 Dec 1985

5340-66-152-4996
Mounting Bracket

661524996
F1303-032290: RNCC: 3 | RNVC: 2

21 Feb 2005

5340-66-148-5539
Drain Cap And S Kit

661485539
90492: RNCC: 3 | RNVC: 2

12 Jul 2002

5340-66-123-1706
Webbing Strap

661231706
435 790 00 96: RNCC: 3 | RNVC: 2

24 Sep 1985

5340-66-161-4464
Mending Plate

661614464
1372919: RNCC: 3 | RNVC: 2

31 Oct 2013

5340-66-130-5045
Access Cover

661305045
044-2110: RNCC: 3 | RNVC: 2
044-2110: RNCC: 3 | RNVC: 2
044-2110: RNCC: 5 | RNVC: 2

31 Jan 2002

5340-66-100-4762
Bracket

661004762
EX20045276: RNCC: 3 | RNVC: 2

23 Feb 1979

5340-66-103-9792
Retaining Clip

661039792
RC1: RNCC: 3 | RNVC: 2

7 Apr 1970

5340-66-128-8496
Rat Tiedown Strap

661288496
1802-2-1203 X 2.5: RNCC: 3 | RNVC: 2

30 Nov 1993

5340-66-153-8969
Mounting Bracket

661538969
FFG35/439/DM/8700021-4: RNCC: 3 | RNVC: 2

25 Nov 2005

5340-66-154-6097
Access Cover

661546097
6.230.3031: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-66-065-1436
Angle Bracket

5340-66-033-4963
Dust Protective Cap

5340-66-153-5166
Gear Knob Assy

661535166
3233195070: RNCC: 3 | RNVC: 2
3233195070: RNCC: 5 | RNVC: 2

1 Sep 2005

5340-66-146-9363
Test Coupling

661469363
SMK20-1,1/16 JIC: RNCC: 3 | RNVC: 2
AC320PL-5: RNCC: 3 | RNVC: 2

12 Oct 2000

5340-66-145-4795
Air Duct

661454795
608/2/57869/000: RNCC: 3 | RNVC: 2

28 Sep 1999

5340-66-158-8748
Pipe Saddle

661588748
1373316: RNCC: 3 | RNVC: 2

16 Sep 2010

5340-66-158-1700
Multiple Angle Bracket

661581700
CYG9237: RNCC: 3 | RNVC: 2

14 Sep 2009

5340-66-155-4878
Helical Compression Spring Retainer

661554878
120270-66450: RNCC: 3 | RNVC: 2

2 Apr 2007

5340-66-161-2852
Angle Bracket

661612852
15019410: RNCC: 3 | RNVC: 2

21 Aug 2013

5340-66-158-0831
Electronic Equipment Hardware Kit

661580831
61244704: RNCC: 3 | RNVC: 2

3 Aug 2009

5340-66-142-9163
General Purpose Resilient Mount

661429163
999/4/42556/694: RNCC: 3 | RNVC: 2

19 Mar 1997

5340-66-151-0961
Mounting Bracket

661510961
LTA-A03-098-001: RNCC: 3 | RNVC: 2

13 May 2003

5340-66-151-1028
Angle Bracket

661511028
LTA-A05-220: RNCC: 3 | RNVC: 2
LTA-A05-220-001: RNCC: 3 | RNVC: 2

22 May 2003

5340-66-143-8989
General Purpose Resilient Mount

661438989
K10 7-02 DS: RNCC: 3 | RNVC: 2

26 Aug 1997

5340-66-122-9441
Expansion Plug

661229441
FA79PG400760: RNCC: 3 | RNVC: 2
PG1151: RNCC: 3 | RNVC: 2
PG400760: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

17 Jun 1985

5340-66-161-1448
Dust And Moisture Seal Protective Cap

661611448
FMT101: RNCC: 3 | RNVC: 2

3 Jul 2013

5340-66-135-1592
Support Hook

661351592
20014/R: RNCC: 3 | RNVC: 2

8 Jul 1991

5340-66-153-2713
Mounting Bracket

661532713
A210 0306-1: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-154-6321
Holder

661546321
6-230-3027: RNCC: 3 | RNVC: 2
6-230-3027: RNCC: 5 | RNVC: 2

31 Jul 2006

5340-66-060-0565
General Purpose Resilient Mount

660600565
020785: RNCC: 3 | RNVC: 2

9 May 1973

5340-66-147-6568
Webbing Strap

661476568
DT85049-G341/1: RNCC: 3 | RNVC: 2
FLSP-500: RNCC: 3 | RNVC: 2
DT85049-G341/1: RNCC: 5 | RNVC: 2

30 Oct 2001

5340-66-155-9989
Bail Handle

661559989
1214366: RNCC: 3 | RNVC: 2

20 Jul 2007

5340-66-158-7955
Mounting Bracket

661587955
P10005-5: RNCC: 3 | RNVC: 2

3 Aug 2010

5340-66-141-6005
Electronic Equipment Hardware Kit

661416005
MX-F325: RNCC: 3 | RNVC: 2
DE530020034: RNCC: 3 | RNVC: 2
DE530020034: RNCC: 3 | RNVC: 2

15 Oct 1996

5340-66-161-2650
Cushioning Pad

661612650
1600-03-0300C1-05: RNCC: 3 | RNVC: 2
QVRL1600030300C105: RNCC: 5 | RNVC: 2

12 Aug 2013

5340-66-148-4459
Wear Plate

661484459
OED-1749-20-02-05: RNCC: 3 | RNVC: 2

1 May 2002

5340-66-118-7787
Loop Clamp

661187787
001-17349: RNCC: 3 | RNVC: 2

2 Sep 1983

5340-66-157-8154
Spring Tension Clip

661578154
TL830701/NX0: RNCC: 3 | RNVC: 2

3 Apr 2009

5340-66-144-9031
Runner

661449031
531/7/24186/004: RNCC: 3 | RNVC: 2

4 May 1999

5340-66-153-2766
Mounting Bracket

661532766
A210 0236: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-104-9742
Stop Plate

661049742
BA65292: RNCC: 3 | RNVC: 2

7 Apr 1980

5340-66-154-3866
Nut And Bolt Retainer

661543866
NALM00126-3: RNCC: 3 | RNVC: 2
NALM00126-3: RNCC: 5 | RNVC: 1

10 May 2006

5340-66-132-0869
Mounting Bracket

661320869
GH1018/7: RNCC: 3 | RNVC: 2

19 Apr 1989

5340-66-094-5412
Rod End Clevis

660945412
402B2-8-770B: RNCC: 3 | RNVC: 2

17 Apr 1977

5340-66-141-7024
Handwheel

661417024
FB-H125: RNCC: 3 | RNVC: 2
GHE05.1: RNCC: 3 | RNVC: 2

5 Dec 1995

5340-66-156-4708
Webbing Strap

661564708
DG217-505145: RNCC: 3 | RNVC: 2
217-505145: RNCC: 3 | RNVC: 2

3 Dec 2007

5340-66-140-5817
Block Assembly

661405817
004-150-02: RNCC: 3 | RNVC: 2

26 Oct 1995

5340-66-150-6046
Rain

661506046
NO PRIMARY REF 66-150-6046: RNCC: 3 | RNVC: 2
03731201: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-154-7392
Webbing Strap

661547392
10006013-080: RNCC: 3 | RNVC: 2
10006013-080: RNCC: 5 | RNVC: 2

25 Aug 2006

5340-66-142-9167
Mounting Bracket

661429167
658/2/05994/000: RNCC: 3 | RNVC: 2

7 Mar 1997

5340-66-128-4685
Clamping Catch

661284685
360021: RNCC: 3 | RNVC: 2
MYH3276: RNCC: 5 | RNVC: 2

3 Dec 1987

5340-66-160-3886
Mounting Bracket

661603886
ID32-231: RNCC: 3 | RNVC: 2

4 Jul 2012

5340-66-154-7764
Loop Clamp

661547764
AZ6-32: RNCC: 3 | RNVC: 2

4 Sep 2006

5340-66-145-1416
Angle Bracket

661451416
DC10-M1-1: RNCC: 3 | RNVC: 2

4 Jul 2002

5340-66-148-3832
Securing Latch

661483832
F/2888-575-001C: RNCC: 3 | RNVC: 2
Q EDE VHLS F/2888-575-001C: RNCC: 5 | RNVC: 2

27 Feb 2002

5340-66-125-0297
Spacing Threaded Standoff

661250297
A008726 SHEET 10: RNCC: 3 | RNVC: 2
21-01280: RNCC: 5 | RNVC: 2

22 Apr 1986

5340-66-155-6199
Angle Bracket Set

661556199
NALM00649-9: RNCC: 3 | RNVC: 2
1547: RNCC: 5 | RNVC: 9

27 Apr 2007

5340-66-161-2847
Mounting Bracket

661612847
15018406: RNCC: 3 | RNVC: 2

21 Aug 2013

5340-66-051-7680
Access Cover

660517680
ML77A: RNCC: 3 | RNVC: 2

31 Jul 1972

5340-66-131-6171
Protective A Cover

661316171
640/1/30570: RNCC: 3 | RNVC: 2

11 Jan 1989

5340-66-125-2590
Spring Tension Clip

661252590
DE580180581: RNCC: 3 | RNVC: 2

16 Dec 1985

5340-66-137-3521
Spacing Threaded Standoff

661373521
21-90035: RNCC: 3 | RNVC: 2

22 Dec 1992

5340-66-146-8988
Enclosure

661468988
IP 13132/S: RNCC: 3 | RNVC: 2

28 Sep 2000

5340-66-147-7835
Tee Bar

661477835
F/2888-540-006A: RNCC: 3 | RNVC: 2
Q EDE F/2888-540-006A: RNCC: 5 | RNVC: 2

18 Sep 2001

5340-66-120-1775
General Purpose Resilient Mount

661201775
TV411-07R-3(GREEN): RNCC: 3 | RNVC: 2

12 Apr 1984

5340-66-159-6426
Mounting Plate

661596426
048789A-00: RNCC: 3 | RNVC: 2

17 Nov 2011

5340-66-155-5656
Angle Bracket

661555656
471-30205-305: RNCC: 3 | RNVC: 2
507055: RNCC: 5 | RNVC: 2

16 Apr 2007

5340-66-160-4820
Dust And Moisture Seal Protective Cover

661604820
TR-06-0-008: RNCC: 3 | RNVC: 2
TR-06-0-008: RNCC: 5 | RNVC: 2

16 Aug 2012

5340-66-065-3266
Extension Handle

660653266
WCA3117: RNCC: 3 | RNVC: 2
1798-49A: RNCC: 3 | RNVC: 2
WCA3117: RNCC: 3 | RNVC: 2
W4WCA3117: RNCC: 5 | RNVC: 9

4 Nov 1973

5340-66-139-1992
Plain Solid Disk

661391992
STC1179: RNCC: 3 | RNVC: 2

3 Jun 1994

5340-66-155-5827
Mounting Plate

661555827
NMX-10-18-14-13-05: RNCC: 3 | RNVC: 2
NMX1018141305: RNCC: 5 | RNVC: 2

19 Apr 2007

5340-66-134-5831
Dust And Moisture Seal Protective Plug

661345831
DM-30-001 D8: RNCC: 3 | RNVC: 2

10 Dec 1991

5340-66-146-4657
Mounting Plate

661464657
73006-2-142: RNCC: 3 | RNVC: 2
73006-2-142: RNCC: 5 | RNVC: 2

17 May 2000

5340-66-147-7928
Rod End Clevis

661477928
A031800: RNCC: 3 | RNVC: 2
Q EDE HYCL/A031800: RNCC: 5 | RNVC: 2

25 Sep 2001

5340-66-155-8354
Retaining Strap

661558354
471-90225-102: RNCC: 3 | RNVC: 2
517276: RNCC: 5 | RNVC: 2

13 Jun 2007

5340-66-146-0805
Mechanic Rear Cover

661460805
AK10222: RNCC: 3 | RNVC: 2
AK10222: RNCC: 5 | RNVC: 2
AK10222: RNCC: 5 | RNVC: 2

7 Jan 2000

5340-66-157-0630
Loop Clamp

661570630
WR-AC-MC-01: RNCC: 3 | RNVC: 2

15 Jul 2008

5340-66-146-0871
Mounting Plate

661460871
438 0529-01: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-66-139-3352
Double Angle Bracket

661393352
14691-01: RNCC: 3 | RNVC: 2

30 Aug 1994

5340-66-160-5855
Mounting Bracket

661605855
F190 080 F79U-024 304SS: RNCC: 3 | RNVC: 2
HSA006211: RNCC: 5 | RNVC: 2
2135858: RNCC: 5 | RNVC: 2

13 Sep 2012

5340-66-157-4615
Webbing Strap

661574615
468-B2-650: RNCC: 3 | RNVC: 2

26 Nov 2008

5340-66-140-6740
Brackets Welded

661406740
DE250530352: RNCC: 3 | RNVC: 2

27 Feb 1996

5340-66-032-2357
Saddle Clip

660322357
ADE(V)94-477: RNCC: 3 | RNVC: 2
HYG2688: RNCC: 5 | RNVC: 2

29 Jul 1969

5340-66-084-6709
Mortise Lock Set

660846709
R55: RNCC: 3 | RNVC: 2
5340MSR55: RNCC: 5 | RNVC: 9

10 Oct 1975

5340-66-131-7802
Loop Clamp

661317802
N313-30: RNCC: 3 | RNVC: 2
946.31.05.113: RNCC: 5 | RNVC: 2

17 Mar 1989

5340-66-154-9497
Retaining Band

661549497
471-60812-102: RNCC: 3 | RNVC: 2
510093: RNCC: 5 | RNVC: 2

18 Oct 2006

5340-66-160-8646
Mounting Plate

661608646
P10473-04: RNCC: 3 | RNVC: 2

13 Feb 2013

5340-66-158-9343
Webbing Strap

661589343
15017879: RNCC: 3 | RNVC: 2

28 Oct 2010

5340-66-139-1795
Retaining Bracket

661391795
SCES10623: RNCC: 3 | RNVC: 1
BRACKET,RETAINING,LEVELING JACKS: RNCC: 5 | RNVC: 1

5 Jul 1994

5340-66-147-3843
Permeate Port

661473843
50558: RNCC: 3 | RNVC: 2

11 Oct 2001

5340-66-124-3320
Spacing Threaded Standoff

661243320
606-709: RNCC: 3 | RNVC: 2
606-709: RNCC: 5 | RNVC: 2

16 May 1985

5340-66-130-1492
Webbing Strap

661301492
STRAP/NYLON200CM: RNCC: 3 | RNVC: 2

9 Oct 1987

5340-66-157-6731
Mounting Bracket

661576731
D-2703: RNCC: 3 | RNVC: 2
H12-01-001: RNCC: 5 | RNVC: 2

6 Feb 2009

5340-66-152-4025
Webbing Strap

661524025
20040F00-00-0 5MTS: RNCC: 3 | RNVC: 2

29 Oct 2004

5340-66-161-2884
Dust And Moisture Seal Protective Cover

661612884
EXP 0121: RNCC: 3 | RNVC: 2
EXP 0121: RNCC: 5 | RNVC: 2

21 Aug 2013

5340-66-038-5359
Nut And Bolt Locking Plate

660385359
5S6878: RNCC: 3 | RNVC: 2

12 Feb 1971

5340-66-016-2593
Hinged Hasp

660162593
7005: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-161-2290
Mounting Bracket

661612290
54434M: RNCC: 3 | RNVC: 2

1 Aug 2013

5340-66-027-0708
Angle Bracket

660270708
ADE(M)59-10-2: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-156-3529
Mounting Bracket

661563529
471-40007-500: RNCC: 3 | RNVC: 2
509650: RNCC: 5 | RNVC: 2

5 Nov 2007

5340-66-146-3250
Right Handle

661463250
2386-43960-00: RNCC: 3 | RNVC: 2
2386-43960-00: RNCC: 5 | RNVC: 2

6 Apr 2000

5340-66-156-0001
Mounting Bracket

661560001
1214376: RNCC: 3 | RNVC: 2

20 Jul 2007

5340-66-157-9215
Mounting Bracket

661579215
PC50-TILT-001: RNCC: 3 | RNVC: 2
PC50-TILT-001: RNCC: 5 | RNVC: 2

18 May 2009

5340-66-025-0074
Intake Air Bracket

660250074
ADE(V)94-353: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-155-1181
Mounting Bracket

661551181
471-40205-105: RNCC: 3 | RNVC: 2
515028: RNCC: 3 | RNVC: 2

7 Dec 2006

5340-66-108-8517
Dust And Moisture Seal Protective Cap

661088517
PR1108-31: RNCC: 3 | RNVC: 2

31 Jul 1981

5340-66-154-9715
Hand Crank

661549715
471-40215-106: RNCC: 3 | RNVC: 2
511780: RNCC: 5 | RNVC: 2

26 Oct 2006

5340-66-160-4324
Dust And Moisture Seal Protective Cap

661604324
QDPC-12: RNCC: 3 | RNVC: 2
QDC-12: RNCC: 5 | RNVC: 2
QDC-12: RNCC: 5 | RNVC: 2
QDC-12: RNCC: 5 | RNVC: 9

20 Jul 2012

5340-66-156-4328
General Purpose Access Door

661564328
15016410: RNCC: 3 | RNVC: 2

26 Nov 2007

5340-66-148-5734
Access Cover

661485734
1151A30350: RNCC: 3 | RNVC: 2

6 Sep 2002

5340-66-150-3934
Butt Hinge

661503934
NO PRIMARY REF 66-150-3934: RNCC: 3 | RNVC: 2
04083706: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-146-4042
Dust And Moisture Seal Protective Cap

661464042
DCR-04-A-24-3A: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

8 May 2000

5340-66-147-4489
Mounting Bracket

661474489
CX25-1-M34-0: RNCC: 3 | RNVC: 2

7 May 2001

5340-66-066-4215
Loop Clamp

660664215
171040K: RNCC: 3 | RNVC: 2

7 Feb 1974

5340-66-105-4734
Mounting Bracket

661054734
450407001-01: RNCC: 3 | RNVC: 2

18 Oct 1989

5340-66-150-1403
Earplugs Airsoft Dp

661501403
NO PRIMARY REF 66-150-1403: RNCC: 3 | RNVC: 2
00733329: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-120-3956
Webbing Strap

661203956
DE580180876: RNCC: 3 | RNVC: 2
DE580180876-2: RNCC: 3 | RNVC: 2
DE580180876-2: RNCC: 5 | RNVC: 2

12 Apr 1984

5340-66-144-9861
Angle Bracket

661449861
10607180: RNCC: 3 | RNVC: 2
450018: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-66-153-2069
Mounting Bracket

661532069
M10050-8: RNCC: 3 | RNVC: 2

21 Jun 2005

5340-66-131-4495
Strap Assembly

661314495
DE580170411: RNCC: 3 | RNVC: 2

28 Oct 1988

5340-66-068-0659
Deflector Plat Clip

660680659
991-9911: RNCC: 3 | RNVC: 2

23 Aug 1974

5340-66-061-6526
Helical Compression Spring Seat

660616526
320473: RNCC: 3 | RNVC: 2

29 Jul 1973

5340-66-146-3289
Support Arm

661463289
73016-3-38: RNCC: 3 | RNVC: 2

7 Apr 2000

5340-66-153-4163
Double Angle Bracket

661534163
AL05047-1: RNCC: 3 | RNVC: 2

15 Aug 2005

5340-66-133-3113
Mounting Bracket

661333113
553.10.09.385: RNCC: 3 | RNVC: 2

16 Oct 1996

5340-66-160-3594
Mechanic Equipment Hardware Kit

661603594
1749791: RNCC: 3 | RNVC: 2

25 Jun 2012

5340-66-122-6785
Loop Clamp

661226785
83AX 685: RNCC: 3 | RNVC: 2
25095670: RNCC: 3 | RNVC: 2
83AX685: RNCC: 5 | RNVC: 9

16 Oct 1984

5340-66-160-9117
Webbing Strap

661609117
10006012-065: RNCC: 3 | RNVC: 2

4 Mar 2013

5340-66-160-2396
Spring Tension Clip

661602396
K299-682: RNCC: 3 | RNVC: 2
K299-682: RNCC: 5 | RNVC: 2
BMA-H05-0081-01: RNCC: 5 | RNVC: 2

7 May 2012

5340-66-070-7460
Angle Bracket

660707460
446G2114-068: RNCC: 3 | RNVC: 2

30 Oct 1970

5340-66-155-4914
Access Cover

661554914
196630-01732: RNCC: 3 | RNVC: 2

2 Apr 2007

5340-66-157-8008
Mounting Bracket

661578008
5208181: RNCC: 3 | RNVC: 2

31 Mar 2009

5340-66-154-7575
Loop Clamp

661547575
BMD-H05-0022-01: RNCC: 3 | RNVC: 2

29 Aug 2006

5340-66-106-8723
Fusible Plug

661068723
DW1330: RNCC: 3 | RNVC: 2
5920-15-965-0190: RNCC: 6 | RNVC: 9

10 Nov 1984

5340-66-142-4610
Butt Hinge

661424610
471-90423-30: RNCC: 3 | RNVC: 2
511264: RNCC: 3 | RNVC: 2

20 Aug 1996

5340-66-108-5330
Nonmetallic Bumper

661085330
B8158-2-25: RNCC: 3 | RNVC: 2

11 Oct 1980

5340-66-139-9207
Pads Thrust Bearing

661399207
3.048.10R: RNCC: 3 | RNVC: 2
729924: RNCC: 5 | RNVC: 2

9 Sep 1994

5340-66-158-2185
Tie Down Adapter

661582185
8.9193: RNCC: 3 | RNVC: 2

1 Oct 2009

5340-66-147-7607
Remo Cover Assembly

661477607
6671323-9: RNCC: 3 | RNVC: 2
6671323-9: RNCC: C | RNVC: 1

16 Aug 2001

5340-66-142-0002
General Purpose Resilient Mount

661420002
BB10QJ: RNCC: 3 | RNVC: 2
BB109QJ: RNCC: 3 | RNVC: 2

9 Feb 1996

5340-66-104-6263
Retaining Strap

661046263
H2244: RNCC: 3 | RNVC: 2

7 Apr 1980

5340-66-134-8302
Dust And Moisture Seal Protective Plug

661348302
634040AA: RNCC: 3 | RNVC: 2

5 Jul 1990

5340-66-144-7311
Hinged Hasp

661447311
MH-A167-003-A5: RNCC: 3 | RNVC: 2

25 Jan 1999

5340-66-150-0780
Expansion Shield

661500780
NO PRIMARY REF 66-150-0780: RNCC: 3 | RNVC: 2
01794807: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-148-4532
Dust And Moisture Seal Boot

661484532
OED-1749-23-02: RNCC: 3 | RNVC: 2

7 May 2002

5340-66-107-5128
Angle Bracket

661075128
363PQC41-005: RNCC: 3 | RNVC: 2

15 May 1981

5340-66-153-4092
Mounting Plate

661534092
15013100-02: RNCC: 3 | RNVC: 2

12 Aug 2005

5340-66-140-7488
Webbing Strap

661407488
AYG8666: RNCC: 3 | RNVC: 2

6 Nov 1995

5340-66-152-3792
Lock-Release Lever

661523792
E5-2-005-101: RNCC: 3 | RNVC: 2
DF01-601-2: RNCC: 3 | RNVC: 2

9 Oct 2004

5340-66-142-6357
Mounting Plate

661426357
197745: RNCC: 3 | RNVC: 2

12 Dec 1996

5340-66-130-9760
Threaded Strip

661309760
MTA503: RNCC: 3 | RNVC: 2

5 Oct 1988

5340-66-125-2734
Angle Bracket

661252734
DE580180728: RNCC: 3 | RNVC: 2

2 Jan 1986

5340-66-087-7652
Retaining Strap

660877652
1213-26770: RNCC: 3 | RNVC: 2

20 Apr 1975

5340-66-140-8107
Top Operator

661408107
V0200: RNCC: 3 | RNVC: 2

22 Nov 1994

5340-66-154-1705
Mechanical Dr Cover

661541705
S0E56A1E1816-521: RNCC: 3 | RNVC: 2

15 Mar 2006

5340-66-134-9036
Electronic Equipment Hardware Kit

661349036
418-5-52571-000: RNCC: 3 | RNVC: 2
MX-F117: RNCC: 5 | RNVC: 2

12 Oct 1990

5340-66-093-6949
Access Cover

660936949
163P/0215/014 TYPE K: RNCC: 3 | RNVC: 2

7 May 1978

5340-66-018-7166
Double Angl Bracket

5340-66-082-6606
Spacing Threaded Standoff

660826606
ADE(W)67-249-1 ISSUE 2: RNCC: 3 | RNVC: 2

20 Apr 1975

5340-66-108-9834
Access Cover

661089834
163P/0215/014 TYPE A: RNCC: 3 | RNVC: 1

18 Sep 1981

5340-66-060-5915
Synchro Clamp

660605915
1000-5791: RNCC: 3 | RNVC: 2
VLK5791: RNCC: 5 | RNVC: 2

19 Aug 1973

5340-66-156-8003
Block Clamp

661568003
532.30.09.180: RNCC: 3 | RNVC: 2

16 Apr 2008

5340-66-154-5265
Mechanic Equipment Hardware Kit

661545265
A210 0348: RNCC: 3 | RNVC: 2

26 Jun 2006

5340-66-093-0245
Access Cover

660930245
E117B27803: RNCC: 3 | RNVC: 2

3 Nov 1976

5340-66-160-2427
Bumper

661602427
M13402055/M8M8: RNCC: 3 | RNVC: 2
BM070001: RNCC: 5 | RNVC: 2

7 May 2012

5340-66-139-9991
Pallet Stop Plate

661399991
12760-B-301: RNCC: 3 | RNVC: 1
12760-B-301/1: RNCC: 3 | RNVC: 2

23 Aug 1994

5340-66-159-3161
Dust And Moisture Seal Protective Cap

661593161
4915-4400: RNCC: 3 | RNVC: 2
4915-4400: RNCC: 5 | RNVC: 2

6 Jun 2011

5340-66-155-5617
Angle Bracket

661555617
471-30205-302: RNCC: 3 | RNVC: 2
507052: RNCC: 5 | RNVC: 2

16 Apr 2007

5340-66-128-6487
Mounting Bracket

661286487
R575615: RNCC: 3 | RNVC: 2
2540-97-111-6376: RNCC: C | RNVC: 1

29 Jul 1993

5340-66-156-4780
Extension Drawer Slide

661564780
10008006-02: RNCC: 3 | RNVC: 2
C9308-14-R: RNCC: 5 | RNVC: 2

6 Dec 2007

5340-66-143-3790
Locating Pin

661433790
PGM-E-4-32: RNCC: 3 | RNVC: 2

21 Apr 1998

5340-66-154-9190
Mounting Plate

661549190
15014938: RNCC: 3 | RNVC: 2

6 Oct 2006

5340-66-147-9402
Female Camlock To B

661479402
AB100: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-66-141-6250
Retaining Strap

661416250
658/1/05452/003: RNCC: 3 | RNVC: 2

30 Jun 1997

5340-66-153-2871
Mounting Bracket

661532871
A210 0335-1: RNCC: 3 | RNVC: 2

6 Jul 2005

5340-66-157-5305
Mounting Bracket

661575305
V02-11-03-01-00: RNCC: 3 | RNVC: 2

10 Dec 2008

5340-66-156-1013
Access Cover

661561013
RP245819/B/29: RNCC: 3 | RNVC: 2
RP245819/B/29: RNCC: 5 | RNVC: 2

27 Aug 2007

5340-66-148-7824
Filter Chair

661487824
BE6099: RNCC: 3 | RNVC: 2

26 Jul 2002

5340-66-096-8340
Plain Solid Disk

660968340
104-199: RNCC: 3 | RNVC: 2

21 Apr 1978

5340-66-157-8810
Mounting Plate

661578810
BMA-A19-0160-01: RNCC: 3 | RNVC: 2

1 May 2009

5340-66-150-0488
Door Closer

661500488
NO PRIMARY REF 66-150-0488: RNCC: 3 | RNVC: 2
04076904: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-137-1331
Door Handle Boss

661371331
A200230 SHEET 2 OF 2 ITEM 7: RNCC: 3 | RNVC: 2

4 Sep 1992

5340-66-157-4678
Mounting Bracket

661574678
V0507-CE-1616: RNCC: 3 | RNVC: 2

26 Nov 2008

5340-66-147-6475
Dust And Moisture Seal Protective Cap

661476475
A53-997-B2180-0B00: RNCC: 3 | RNVC: 2

18 Oct 2001

5340-66-148-9526
Extension Drawer Slide

661489526
12756603-02: RNCC: 3 | RNVC: 2

18 Mar 2003

5340-66-153-2597
Mounting Bracket

661532597
A210 0315-1: RNCC: 3 | RNVC: 2

4 Jul 2005

5340-66-154-5615
Door Lock Kits

661545615
940010: RNCC: 3 | RNVC: 2
05L-940010: RNCC: 5 | RNVC: 2

6 Jul 2006

5340-66-101-5759
Rim Latch

661015759
R1962: RNCC: 3 | RNVC: 2
R196: RNCC: 5 | RNVC: 2

22 May 1979

5340-66-142-2283
Mounting Bracket

661422283
686343: RNCC: 3 | RNVC: 2

10 Apr 1996

5340-66-146-9598
Mounting Bracket

661469598
325/25 PP GD-V4A: RNCC: 3 | RNVC: 2

24 Oct 2000

5340-66-154-8532
Blank Panel

661548532
15010478-15: RNCC: 3 | RNVC: 2

19 Sep 2006

5340-66-150-0761
Expansion Shield

661500761
NO PRIMARY REF 66-150-0761: RNCC: 3 | RNVC: 2
08788214: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-150-0666
Padlock

661500666
NO PRIMARY REF 66-150-0666: RNCC: 3 | RNVC: 2
03381307: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-126-2717
Access Cover

661262717
6K7-11371-01-9M: RNCC: 3 | RNVC: 2

16 Jan 1991

5340-66-141-8027
Dust And Moisture Seal Boot

661418027
A700217: RNCC: 3 | RNVC: 2
53/70495: RNCC: 3 | RNVC: 2

19 Jan 1996

5340-66-138-6700
General Purpose Resilient Mount

661386700
FN1630: RNCC: 3 | RNVC: 2

23 Mar 1994

5340-66-142-6369
Spring Holder

661426369
226595: RNCC: 3 | RNVC: 2

12 Dec 1996

5340-66-156-5074
Seal Retaining Plate

661565074
471-62808-100-T01: RNCC: 3 | RNVC: 2
502737: RNCC: 5 | RNVC: 2

13 Dec 2007

5340-66-160-6542
Section Block Clamp

661606542
ID25-272: RNCC: 3 | RNVC: 2

3 Oct 2012

5340-66-157-7348
Chainsa Spike Plate

661577348
503 92 27-01: RNCC: 3 | RNVC: 2
503 92 27-01: RNCC: 5 | RNVC: 2

2 Mar 2009

5340-66-152-1571
Mounting Bracket

661521571
WT461-4-84-4: RNCC: 3 | RNVC: 2
WT461-4-84-4: RNCC: 3 | RNVC: 2

29 Jul 2004

5340-66-140-5828
Cushioning Pad

661405828
004-351-01: RNCC: 3 | RNVC: 2

2 Nov 1995

5340-66-159-1326
Strap Hinge

661591326
LBC 02-11: RNCC: 3 | RNVC: 2

4 Mar 2011

5340-66-129-2846
Double Angle Bracket

661292846
446D-2114-060: RNCC: 3 | RNVC: 2

23 Oct 1987

5340-66-139-0340
Hood Hinge Bracket

661390340
68QM214: RNCC: 3 | RNVC: 2
A68QM214: RNCC: 3 | RNVC: 2
A68QM214: RNCC: 3 | RNVC: 9

28 Jan 1994

5340-66-150-0242
Swivel Caster

661500242
NO PRIMARY REF 66-150-0242: RNCC: 3 | RNVC: 2
00353260: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-142-9692
Bow Handle

661429692
658/2/06478/000: RNCC: 3 | RNVC: 2

1 May 1997

5340-66-143-4316
Coupling

661434316
493038: RNCC: 3 | RNVC: 2

27 Apr 1998

5340-66-019-5651
Expansion Plug

660195651
TYPE A: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-157-4988
Multiple Angle Bracket

661574988
V01-00-00F19-13: RNCC: 3 | RNVC: 2

2 Dec 2008

5340-66-152-6294
Angle Bracket

661526294
MH-A314-0083 ANGLE 5: RNCC: 3 | RNVC: 2
MH-A314-0083-01 ANGLE 5: RNCC: 3 | RNVC: 2

24 Feb 2005

5340-66-144-9246
Bracket

661449246
823-0059: RNCC: 3 | RNVC: 2
823-0059: RNCC: C | RNVC: 1

10 May 1999

5340-66-130-5046
Access Cover

661305046
044-2102: RNCC: 3 | RNVC: 2
044-2102: RNCC: 3 | RNVC: 2

29 Jul 1988

5340-66-112-3631
Access Cover

661123631
527.20.09.105: RNCC: 3 | RNVC: 2
527.20.09.105: RNCC: 3 | RNVC: 2

20 Aug 1990

5340-66-159-1673
Mounting Bracket

661591673
DE253650023: RNCC: 3 | RNVC: 2

21 Mar 2011

5340-66-142-9641
Elastic C Retainer

661429641
658/2/06288/000: RNCC: 3 | RNVC: 2

4 Apr 1997

5340-66-144-7632
Dust And Moisture Seal Protective Cap

661447632
56597-10: RNCC: 3 | RNVC: 2
10608658-13: RNCC: 5 | RNVC: 2

11 Feb 1999

5340-66-143-3621
Timer Plate

661433621
142309: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-66-154-3711
Block Clamp

661543711
DE251550001: RNCC: 3 | RNVC: 2

5 May 2006

5340-66-148-3923
Cover

661483923
C11179: RNCC: 3 | RNVC: 2

8 Mar 2002

5340-66-155-4662
Steering Handle

661554662
196630-056BM: RNCC: 3 | RNVC: 2

29 Mar 2007

5340-66-145-9621
Webbing Strap

661459621
1151A00-01: RNCC: 3 | RNVC: 2

31 Oct 2001

5340-66-145-4513
Uut Retainers

661454513
608/2/50283: RNCC: 3 | RNVC: 2

20 Sep 1999

5340-66-155-6061
Manual Control Handle

661556061
471-90422-277: RNCC: 3 | RNVC: 2
518585: RNCC: 5 | RNVC: 2

24 Apr 2007

5340-66-157-4232
Dust And Moisture Seal Protective Plug

661574232
MP-3315: RNCC: 3 | RNVC: 2
15017539: RNCC: 3 | RNVC: 2

18 Nov 2008

5340-66-146-1597
Manual Control Handle

661461597
964168: RNCC: 3 | RNVC: 2

3 Feb 2000

5340-66-096-8421
Sealing Plug Assembly

660968421
30977A: RNCC: 3 | RNVC: 2

7 May 1978

5340-66-143-8139
General Purpose Access Door

661438139
SFP008AP0093: RNCC: 3 | RNVC: 2
481853539: RNCC: 3 | RNVC: 2

11 Aug 1997

5340-66-147-6160
Tool Clip

661476160
7074: RNCC: 3 | RNVC: 2
Q EDE VHTC/7404: RNCC: 5 | RNVC: 2

19 Sep 2001

5340-66-123-5317
Hardwar Small Wheel

661235317
750-05.2800-2: RNCC: 3 | RNVC: 2

13 Feb 1998

5340-66-143-7269
Mounting Bracket

661437269
658/2/06644/001: RNCC: 3 | RNVC: 2

2 Jul 1997

5340-66-125-9583
Magnetic Catch

661259583
015036: RNCC: 3 | RNVC: 2
22-1W: RNCC: 5 | RNVC: 2

25 Jul 1990

5340-66-153-2162
Buckle

661532162
5340-017: RNCC: 3 | RNVC: 1
386-1326: RNCC: 3 | RNVC: 2

21 Jun 2005

5340-66-104-2081
Angle Bracket

661042081
DE420030017: RNCC: 3 | RNVC: 2

31 Jul 1971

5340-66-124-8505
Retaining Strap

661248505
EX2005120: RNCC: 3 | RNVC: 2

8 Jan 1986

5340-66-155-8163
Retaining Band

661558163
471-50831-2: RNCC: 3 | RNVC: 2
510244: RNCC: 5 | RNVC: 2

6 Jun 2007

5340-66-064-7046
Spacing Threaded Standoff

660647046
NO PRIMARY REF 66-064-7046: RNCC: 3 | RNVC: 2

10 Jan 1974

5340-66-150-7846
Multiple Angle Bracket

661507846
LTA-A10-018-001: RNCC: 3 | RNVC: 2

3 Apr 2003

5340-66-156-5913
Mounting Bracket

661565913
P10009-2-14-1: RNCC: 3 | RNVC: 2

30 Jan 2008

5340-66-154-6995
Nut And Bolt Locking Plate

661546995
471-60801-120: RNCC: 3 | RNVC: 2
506691: RNCC: 5 | RNVC: 2

16 Aug 2006

5340-66-154-3284
Access Cover

661543284
471-RH000-009-T05: RNCC: 3 | RNVC: 2
471-RH000-009-T05: RNCC: 5 | RNVC: 2

26 Apr 2006

5340-66-128-6260
Leakproof Seal Plug

661286260
MYH2419: RNCC: 3 | RNVC: 2

25 Feb 1992

5340-66-125-3240
Webbing Strap

661253240
DE580160711: RNCC: 3 | RNVC: 2

7 Mar 1986

5340-66-153-8756
Mounting Bracket

661538756
T/BK/MA/SM/CE: RNCC: 3 | RNVC: 2
T/BK/MA/SM/CE: RNCC: 5 | RNVC: 2

22 Nov 2005

5340-66-155-3268
Rod End Connector

661553268
10RE29467M: RNCC: 3 | RNVC: 2

5 Mar 2007

5340-66-157-7972
Rod End Connector

661577972
331: RNCC: 3 | RNVC: 2

30 Mar 2009

5340-66-146-7027
Support

661467027
1416510: RNCC: 3 | RNVC: 2

15 Aug 2000

5340-66-140-6089
Access Cover

661406089
004-263: RNCC: 3 | RNVC: 2

12 May 1995

5340-66-153-4192
Angle Bracket

661534192
15013205: RNCC: 3 | RNVC: 2

15 Aug 2005

5340-66-154-7713
Retaining Strap

661547713
C24709: RNCC: 3 | RNVC: 2

1 Sep 2006

5340-66-147-7830
Oil Cooler Brace

661477830
F/2888-560-007B: RNCC: 3 | RNVC: 2
Q EDE F/2888-560-007B: RNCC: 5 | RNVC: 2

18 Sep 2001

5340-66-142-9043
Mounting Bracket

661429043
658/2/06455/000: RNCC: 3 | RNVC: 2

10 Feb 1997

5340-66-155-4765
General Purpose Resilient Mount

661554765
196630-05361: RNCC: 3 | RNVC: 2

30 Mar 2007

5340-66-154-7932
Retaining Clip

661547932
15002170: RNCC: 3 | RNVC: 2

6 Sep 2006

5340-66-145-4868
Breec Holding Rack

661454868
A0000700752D0001: RNCC: 3 | RNVC: 2

29 Sep 1999

5340-66-154-8191
Access Cover

661548191
15007898-02: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-66-152-1396
General Purpose Access Door

661521396
BMA-A05-1143: RNCC: 3 | RNVC: 2

10 Jul 2004

5340-66-146-8918
Abutment Ring

661468918
SF AA1 6650: RNCC: 3 | RNVC: 2

19 Sep 2000

5340-66-144-4988
Retaining Clip

661444988
49000116: RNCC: 3 | RNVC: 2

31 Jul 1998

5340-66-154-8556
Mounting Bracket

661548556
15010477: RNCC: 3 | RNVC: 2

20 Sep 2006

5340-66-157-7888
Cushioning Pad

661577888
321: RNCC: 3 | RNVC: 2

27 Mar 2009

5340-66-143-3909
Cap

661433909
322177: RNCC: 3 | RNVC: 2

22 Apr 1998

5340-66-019-5634
Expansion Plug

660195634
SA26: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-160-2108
Dust And Moisture Seal Protective Cap-Plug

661602108
BPF0222: RNCC: 3 | RNVC: 2
121245: RNCC: 5 | RNVC: 2

27 Apr 2012

5340-66-160-8421
Barrel Bolt

661608421
1400-02-0001W2-P1: RNCC: 3 | RNVC: 2

4 Feb 2013

5340-66-127-5568
Strapping And Sealing Kit

661275568
04251606: RNCC: 3 | RNVC: 2
04251606: RNCC: 5 | RNVC: 2
M211: RNCC: 5 | RNVC: 2

10 Oct 1986

5340-66-128-5396
Dust And Moisture Seal Boot

661285396
VH2519: RNCC: 3 | RNVC: 2
HYL8664: RNCC: 5 | RNVC: 2

8 Jun 1989

5340-66-147-8651
Actuator

661478651
487364: RNCC: 3 | RNVC: 2

10 Oct 2001

5340-66-158-4622
Mounting Plate

661584622
HYL8965: RNCC: 3 | RNVC: 2

5 Feb 2010

5340-66-150-0254
Swivel Caster

661500254
NO PRIMARY REF 66-150-0254: RNCC: 3 | RNVC: 2
04221258: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-154-9311
Mounting Bracket

661549311
BMA-A05-1591-02: RNCC: 3 | RNVC: 2

11 Oct 2006

5340-66-146-1162
Cable Strap

661461162
762 9105-05: RNCC: 3 | RNVC: 2

24 Jan 2000

5340-66-019-5766
Hinged Hasp

660195766
WELD0M917: RNCC: 3 | RNVC: 1
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

1 Jan 1968

5340-66-143-7249
Slide

661437249
658/1/06450/000: RNCC: 3 | RNVC: 2

2 Jul 1997

5340-66-145-7817
Clamping Catch

661457817
M139-4M-583/1E: RNCC: 3 | RNVC: 2

10 Nov 1999

5340-66-156-1044
Mounting Plate

661561044
471-90423-118: RNCC: 3 | RNVC: 2
524183: RNCC: 5 | RNVC: 2

28 Aug 2007

5340-66-154-7614
Access Cover

661547614
471-90552-507: RNCC: 3 | RNVC: 2
524229: RNCC: 5 | RNVC: 2

30 Aug 2006

5340-66-158-5564
Helical Compression Spring Retainer

661585564
P10035-21: RNCC: 3 | RNVC: 2

24 Mar 2010

5340-66-155-2990
Mounting Bracket

661552990
BMA-A05-1177: RNCC: 3 | RNVC: 2

21 Feb 2007

5340-66-146-7035
Basket

661467035
1433702: RNCC: 3 | RNVC: 2

11 Aug 2000

5340-66-138-9348
Electronic Equipment Hardware Kit

661389348
418/5/57425/000: RNCC: 3 | RNVC: 2
MX-F207: RNCC: 5 | RNVC: 2

8 Dec 1993

5340-66-157-8526
Butt Hinge Leaf

661578526
BMA-A05-1651-01: RNCC: 3 | RNVC: 2

21 Apr 2009

5340-66-160-1032
Dust And Moisture Seal Boot

661601032
CAP-205: RNCC: 3 | RNVC: 2
BM140230: RNCC: 5 | RNVC: 2

29 Mar 2012

5340-66-123-8571
Mounting Bracket

661238571
ARLM0118-005: RNCC: 3 | RNVC: 2

6 Nov 1998

5340-66-026-5485
Holding Hook

5340-66-029-6194
Synchro Clamp

660296194
200-806: RNCC: 3 | RNVC: 2

16 Oct 1968

5340-66-126-2391
Damper

661262391
688-83664-00: RNCC: 3 | RNVC: 2

7 Jan 1991

5340-66-147-8571
Support Bracket

661478571
F/2888-575-003C: RNCC: 3 | RNVC: 2
Q EDE F/2888-575-003C: RNCC: 5 | RNVC: 2

25 Sep 2001

5340-66-144-9797
Turnbuckle

661449797
RF1591: RNCC: 3 | RNVC: 2

11 Jun 1999

5340-66-137-3165
Butt Hinge

661373165
R187 LEFTHAND: RNCC: 3 | RNVC: 2

12 Nov 1992

5340-66-148-8505
Expansion Plug

661488505
OED-1749-09-37: RNCC: 3 | RNVC: 2

24 Oct 2002

5340-66-151-9250
Key Holder

661519250
NO PRIMARY REF 66-151-9250: RNCC: 3 | RNVC: 2
1452630: RNCC: 5 | RNVC: 2

4 Mar 2004

5340-66-138-5666
Retaining Clip

661385666
B831A551/15: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-66-037-1983
Double Angle Bracket

660371983
ADE(V)225-602: RNCC: 3 | RNVC: 2

16 Sep 1970

5340-66-154-5179
Access Cover

661545179
DE252130195: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-66-085-4937
Stainless Stee Tank

660854937
209543: RNCC: 3 | RNVC: 2

21 Mar 1975

5340-66-153-2763
Mounting Bracket

661532763
A210 0283: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-049-4097
Spring Tension Clip

660494097
CL8: RNCC: 3 | RNVC: 2

24 Nov 1972

5340-66-138-9485
Dust And Moisture Seal Protective Cap

661389485
SCES11460 ITEM 8: RNCC: 3 | RNVC: 1
DPD/4320/2000 (ITEM 8): RNCC: 3 | RNVC: 2
PD 8530107 (ITEM 8): RNCC: 3 | RNVC: 2
633.025.538: RNCC: 5 | RNVC: 2

1 Dec 1993

5340-66-161-0067
Access Cover

661610067
HBBQ-1150-SS-13-00: RNCC: 3 | RNVC: 2

16 Apr 2013

5340-66-157-4190
Access Cover

661574190
471-51805-146: RNCC: 3 | RNVC: 2
525409: RNCC: 5 | RNVC: 2

14 Nov 2008

5340-66-134-9028
Clamp Bracket

661349028
675/1/34679/000: RNCC: 3 | RNVC: 2

20 Sep 1990

5340-66-142-8431
Rod End Clevis

661428431
363/30-2-1A: RNCC: 3 | RNVC: 2

20 Feb 1997

5340-66-140-5077
Angle Bracket

661405077
450-012-203: RNCC: 3 | RNVC: 2
450002203: RNCC: 3 | RNVC: 2

10 Nov 1994

5340-66-154-5623
Access Cover

661545623
008-02162-001: RNCC: 3 | RNVC: 2

6 Jul 2006

5340-66-157-6763
Mounting Plate

661576763
D-2607: RNCC: 3 | RNVC: 2

9 Feb 2009

5340-66-146-9092
Clamp Universal

661469092
K4-H: RNCC: 3 | RNVC: 2

2 Oct 2000

5340-66-125-3769
Butt Hinge

661253769
DE580160115-1: RNCC: 3 | RNVC: 2

19 Mar 1986

5340-66-156-3434
Multiple Angle Bracket

661563434
1520263: RNCC: 3 | RNVC: 2
15016512: RNCC: 5 | RNVC: 2

1 Nov 2007

5340-66-141-5475
Mounting Bracket

661415475
DE250530330: RNCC: 3 | RNVC: 2
DE250530330: RNCC: 3 | RNVC: 2

14 Jun 1996

5340-66-132-7928
Dust And Moisture Seal Protective Cap

661327928
PPCS: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

31 Mar 1992

5340-66-156-3859
Access Cover

661563859
15011089: RNCC: 3 | RNVC: 2

15 Nov 2007

5340-66-155-1173
Mounting Plate

661551173
53-2041-011: RNCC: 3 | RNVC: 2

7 Dec 2006

5340-66-113-6654
Protective Tooling

661136654
TOOLING FOR 5340-66-101-5721: RNCC: 3 | RNVC: 2

28 Mar 1982

5340-66-139-4810
Turnbuckle

661394810
0494-9507: RNCC: 3 | RNVC: 2

20 Feb 1995

5340-66-142-4642
Mounting Bracket

661424642
471-44468-533T01: RNCC: 3 | RNVC: 2
514596: RNCC: 3 | RNVC: 2

20 Aug 1996

5340-66-156-8103
Angle Bracket

661568103
8368 55993: RNCC: 3 | RNVC: 2

22 Apr 2008

5340-66-157-8158
Spring Tension Clip

661578158
TL830701/NX2: RNCC: 3 | RNVC: 2

3 Apr 2009

5340-66-160-3323
Angle Bracket

661603323
BMP-A05-3014-01: RNCC: 3 | RNVC: 2

13 Jun 2012

5340-66-080-5647
Hinge

660805647
216HINGELH: RNCC: 3 | RNVC: 2
5340MSMSA0143: RNCC: 5 | RNVC: 9

26 Sep 1974

5340-66-160-9170
Mounting Plate

661609170
15020392: RNCC: 3 | RNVC: 2

6 Mar 2013

5340-66-159-1278
Helical Compression Spring Seat

661591278
E15326: RNCC: 3 | RNVC: 2
E15326: RNCC: 3 | RNVC: 2

3 Mar 2011

5340-66-146-3505
Cover

661463505
240483A: RNCC: 3 | RNVC: 2

12 Apr 2000

5340-66-147-0964
Electronic Equipment Hardware Kit

661470964
DE250980311: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-66-150-1583
Dust And Moisture Seal Protective Cap

661501583
NO PRIMARY REF 66-150-1583: RNCC: 3 | RNVC: 2
02216058: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-155-8850
Mechanical Stop

661558850
471-50807-189: RNCC: 3 | RNVC: 2
506092: RNCC: 5 | RNVC: 2

25 Jun 2007

5340-66-154-6502
Access Cover

661546502
6-052-3091: RNCC: 3 | RNVC: 2

3 Aug 2006

5340-66-143-7800
Snap Hook

661437800
BK-16-8: RNCC: 3 | RNVC: 2
BK-16-8: RNCC: 5 | RNVC: 2

6 Aug 1997

5340-66-132-7437
Strap Battery Cap

661327437
5157-2066: RNCC: 3 | RNVC: 2

30 Jun 1989

5340-66-160-2212
Mounting Plate

661602212
BMP-A05-2024-01: RNCC: 3 | RNVC: 2

1 May 2012

5340-66-157-2909
Access Cover

661572909
AG-A1105: RNCC: 3 | RNVC: 2

30 Sep 2008

5340-66-120-6749
Fwd. Hinge Half

661206749
12S1796-11-131: RNCC: 3 | RNVC: 2

13 Oct 1986

5340-66-105-4887
Double Angle Bracket

661054887
450012133: RNCC: 3 | RNVC: 2

26 Mar 1991

5340-66-024-1197
Expansion Plug

660241197
1586: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-148-8828
Double Angle Bracket

661488828
C06520: RNCC: 3 | RNVC: 2

12 Nov 2002

5340-66-146-1984
Mounting Plate

661461984
472 8029-01: RNCC: 3 | RNVC: 2

10 Feb 2000

5340-66-156-1914
Dust And Moisture Seal Protective Cap

661561914
1853511: RNCC: 3 | RNVC: 2
15012445: RNCC: 5 | RNVC: 2

20 Sep 2007

5340-66-146-1365
Mounting Bracket

661461365
TYPE 1V(02)(STBDAFT): RNCC: 3 | RNVC: 2

27 Jan 2000

5340-66-093-1316
Bowpull Door Handle

660931316
D963: RNCC: 3 | RNVC: 2

22 Dec 1976

5340-66-155-5791
Mounting Bracket

661555791
X50MF59: RNCC: 3 | RNVC: 2

18 Apr 2007

5340-66-017-9993
Butt Hinge

660179993
838-85MM: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

1 Jan 1968

5340-66-158-5345
Angle Bracket

661585345
DE253520020: RNCC: 3 | RNVC: 2

12 Mar 2010

5340-66-158-9253
Filler Opening Cap

661589253
91006: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-66-159-0922
Filler Opening Cap

661590922
DB100420: RNCC: 3 | RNVC: 2
DB100420: RNCC: 3 | RNVC: 2

4 Feb 2011

5340-66-032-2468
Rod End Connector

5340-66-148-2826
Mounting Bracket

661482826
LTA-A20-079-001/S: RNCC: 3 | RNVC: 2
LTA-A20-079-001: RNCC: 3 | RNVC: 2

3 Jun 2002

5340-66-151-5789
Mounting Bracket

661515789
LTA-A08-027: RNCC: 3 | RNVC: 1
LTA-A08-027-001: RNCC: 3 | RNVC: 2

21 Jul 2003

5340-66-107-9007
Loop Clamp

661079007
AF/1: RNCC: 3 | RNVC: 2

22 May 1985

5340-66-157-4284
General Purpose Access Door

661574284
468-02-0201A7: RNCC: 3 | RNVC: 2

19 Nov 2008

5340-66-150-2869
Loop Clamp

661502869
NO PRIMARY REF 66-150-2869: RNCC: 3 | RNVC: 2
02251356: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-066-0886
Testing App Adapter

660660886
WCA0004: RNCC: 2 | RNVC: 2
W4WCA0004: RNCC: 5 | RNVC: 9

23 Aug 1974

5340-66-123-0492
Spring Tension Clip

661230492
X70RU26: RNCC: 3 | RNVC: 2

31 Jul 1985

5340-66-139-3625
Mounting Plate

661393625
675/2/43169/000: RNCC: 3 | RNVC: 2

27 Sep 1994

5340-66-146-3436
Door Holder

661463436
1091-04: RNCC: 3 | RNVC: 2

12 Apr 2000

5340-66-126-2366
Mounting Plate

661262366
6K7-82588-00: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-66-126-2324
Mounting Bracket

661262324
6E5-21734-01-33: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-66-130-0728
Spacer

661300728
DE580170042: RNCC: 3 | RNVC: 2

17 Aug 1987

Load More Results