What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is a Hasp Staple?

A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

Hardware, Commercial - Australia (AU)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Australia (AU) - NCB is 66

Page 22 of 29

NSN Format for Hardware, Commercial
Codified by Australia

53	40	66	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Australia (AU)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 53 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 78 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 109 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 25 Items
Holder,Spring 26 Items
What is a Compression Cup? 11 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 43 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 85 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 54 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 27 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 249 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 36 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 87 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 39 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 11 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 16 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 15 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Rim Latch? 18 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Rim Lock? 13 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 12 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 17 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 17 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 18 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 103 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 11 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 59 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 14 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 14 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Plug Button? 12 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Corrosion Preventive Anode? 27 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 78 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 268 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 88 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 70 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 36 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 40 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 41 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Plain Solid Disk? 41 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 12 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 608 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 57 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 54 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 317 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 48 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 40 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 83 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Quick Release Plunger? 17 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 65 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 24 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 14 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 22 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 49 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 19 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 151 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 15 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 444 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 128 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 42 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 53 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 25 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 201 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 33 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 133 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 42 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 54 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Strapping? 28 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 75 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Screw Thread Insert And Tool Assortment? 18 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 28 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 18 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 740 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 11 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 14 Items
What is an Antipilferage Seal? 27 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 129 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Seal Retaining Plate? 29 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 47 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1862 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 15 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 11 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 10 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 766 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 27 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 65 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 79 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 71 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 22 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 12 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 14 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 35 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 50 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 28 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 15 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 20 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 11 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 83 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 138 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 393 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 38 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 11 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 22 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
What is a Key Blank? 22 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 10 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 114 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 11 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 20 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 12 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is a Bumper? 74 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 22 of 29

5340-66-156-9103
Spring Holder

661569103
022AMR89-1: RNCC: 3 | RNVC: 2

29 May 2008

5340-66-139-9261
General Purpose Resilient Mount

661399261
NEW 2C: RNCC: 3 | RNVC: 2
NEW2 CLASS7: RNCC: 3 | RNVC: 2
NEW2C CLASS7: RNCC: 3 | RNVC: 2
CLASS 7: RNCC: 3 | RNVC: 2

13 Sep 1994

5340-66-092-6388
Retaining Strap

5340-66-138-9589
Support

661389589
YA4354700081: RNCC: 3 | RNVC: 2
0064-35-470-0081: RNCC: C | RNVC: 1

12 Nov 1993

5340-66-155-1795
Manual Control Handle

661551795
471-90081-11: RNCC: 3 | RNVC: 2
524593: RNCC: 5 | RNVC: 2

21 Dec 2006

5340-66-154-3287
Access Cover

661543287
471-RH000-009-T06: RNCC: 3 | RNVC: 2
471-RH000-009-T06: RNCC: 5 | RNVC: 2

26 Apr 2006

5340-66-153-3002
Mounting Plate

661533002
60246-66-034: RNCC: 3 | RNVC: 2

7 Jul 2005

5340-66-150-2024
Support Hook

661502024
NO PRIMARY REF 66-150-2024: RNCC: 3 | RNVC: 2
04056005: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-158-2220
Mounting Plate

661582220
K11477-214: RNCC: 3 | RNVC: 2

2 Oct 2009

5340-66-158-4102
Angle Bracket

661584102
K12700-403: RNCC: 3 | RNVC: 2

22 Dec 2009

5340-66-159-8416
Handle Grip

661598416
3952080010: RNCC: 3 | RNVC: 2
SP98144: RNCC: 5 | RNVC: 2

1 Mar 2012

5340-66-152-7917
Mounting Bracket

661527917
ECMA 0608: RNCC: 3 | RNVC: 2

17 Mar 2005

5340-66-127-5338
Grooved Clamp Coupling Ferrule

661275338
SS01/S1014/2: RNCC: 3 | RNVC: 2
011-373713: RNCC: 3 | RNVC: 2
014-011743: RNCC: 3 | RNVC: 2
H011-373713: RNCC: 3 | RNVC: 2
H014-011743: RNCC: 3 | RNVC: 2
163P-4801-021-2: RNCC: 3 | RNVC: 2
SS01S1014-2: RNCC: 5 | RNVC: 2

23 Sep 1986

5340-66-154-7116
Mounting Plate

661547116
ARLM0854-1: RNCC: 3 | RNVC: 2

18 Aug 2006

5340-66-154-4768
Mortise Lock Set

661544768
3572SC: RNCC: 3 | RNVC: 2
3572SC: RNCC: 5 | RNVC: 2

7 Jun 2006

5340-66-141-0094
General Purpose Resilient Mount

661410094
331963540: RNCC: 3 | RNVC: 2
339563599: RNCC: 3 | RNVC: 2
H63-146-95-125-6FF: RNCC: 3 | RNVC: 2

8 Aug 1995

5340-66-157-8119
Permanent Magnet

661578119
20047: RNCC: 3 | RNVC: 2

2 Apr 2009

5340-66-156-5102
Rod End Clevis

661565102
471-62810-109: RNCC: 3 | RNVC: 2
501387: RNCC: 5 | RNVC: 2

14 Dec 2007

5340-66-149-7165
Turnbuckle

661497165
NO PRIMARY REF 66-149-7165: RNCC: 3 | RNVC: 2
00484704: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-152-0021
Access Cover

661520021
SAFE-TPF: RNCC: 3 | RNVC: 2

7 Aug 2004

5340-66-158-6705
Mounting Plate

661586705
ORION-2RU-DIN-RAIL-H: RNCC: 3 | RNVC: 2
ORION-2RU-DIN-RAIL-H: RNCC: 5 | RNVC: 2

27 May 2010

5340-66-156-5179
Mounting Bracket

661565179
471-62810-120: RNCC: 3 | RNVC: 2
501399: RNCC: 5 | RNVC: 2

17 Dec 2007

5340-66-153-2651
Mounting Bracket

661532651
A210 0284-1: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-161-1522
Mounting Plate

661611522
41480P: RNCC: 3 | RNVC: 2

4 Jul 2013

5340-66-158-3063
Bumper

661583063
800-360011: RNCC: 3 | RNVC: 2

5 Nov 2009

5340-66-126-2310
Manual Control Lever

661262310
6E5-14276-00: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-66-139-4497
Electronic Equipment Hardware Kit

661394497
DE530020007: RNCC: 3 | RNVC: 2
MX-F139: RNCC: 5 | RNVC: 2

6 Mar 1995

5340-66-147-9087
Flange Clamp

661479087
A1FS-32: RNCC: 3 | RNVC: 2
Q EDE HYSFC/A1FS-32: RNCC: 5 | RNVC: 2

10 Dec 2001

5340-66-155-7169
Mounting Plate

661557169
631-4777-001: RNCC: 3 | RNVC: 2

15 May 2007

5340-66-126-2381
Rod End Connector

661262381
6E5-48344-00: RNCC: 3 | RNVC: 2

7 Jan 1991

5340-66-158-2604
Dust And Moisture Seal Protective Plug

661582604
274-505-007: RNCC: 3 | RNVC: 2

15 Oct 2009

5340-66-154-3143
Dust And Moisture Seal Protective Cap-Plug

661543143
CP11: RNCC: 3 | RNVC: 2
1154450: RNCC: 5 | RNVC: 2

21 Apr 2006

5340-66-158-3937
Stand Base

661583937
P10098-01: RNCC: 3 | RNVC: 2
P10098-01: RNCC: 5 | RNVC: 2

10 Dec 2009

5340-66-147-4086
Remote Control Unit

661474086
P/2888-704-001A: RNCC: 3 | RNVC: 2
Q EDE P/2888-704-001A: RNCC: 5 | RNVC: 2

1 May 2001

5340-66-142-9063
Latch Lever

661429063
2101: RNCC: 3 | RNVC: 2
999/4/42556/013: RNCC: 3 | RNVC: 2

19 Feb 1997

5340-66-161-1373
Manual Control Handle

661611373
A40-003071-002: RNCC: 3 | RNVC: 2

28 Jun 2013

5340-66-157-7546
Webbing Strap

661577546
ST-56-48: RNCC: 3 | RNVC: 2

13 Mar 2009

5340-66-148-4489
Metal Grille

661484489
A014-567: RNCC: 3 | RNVC: 2

3 May 2002

5340-66-105-6839
Strapping

661056839
57713-0: RNCC: 3 | RNVC: 1
LB26: RNCC: 3 | RNVC: 2

12 Feb 1981

5340-66-150-4143
Screw Thread Insert And Tool Assortment

661504143
NO PRIMARY REF 66-150-4143: RNCC: 3 | RNVC: 2
06464608: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-158-0736
Mounting Bracket

661580736
1728-BH-1220-01: RNCC: 3 | RNVC: 2

28 Jul 2009

5340-66-161-3659
Bumper

661613659
QASM00706-006: RNCC: 3 | RNVC: 2

25 Sep 2013

5340-66-150-9538
Mounting Bracket

661509538
APM-G02-4015-B: RNCC: 3 | RNVC: 1

21 Oct 2003

5340-66-132-0800
Latching Brac Cover

661320800
A012791 SHEET 8: RNCC: 3 | RNVC: 2

20 Mar 1989

5340-66-152-4166
Stand Base

661524166
MC-2539: RNCC: 3 | RNVC: 2

16 Nov 2004

5340-66-151-1626
Webbing Strap

661511626
561598-DMOB: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-66-155-9121
Mounting Bracket

661559121
471-50809-235: RNCC: 3 | RNVC: 2
502675: RNCC: 5 | RNVC: 2

27 Jun 2007

5340-66-072-1799
Friction Catch

660721799
NO PRIMARY REF 66-072-1799: RNCC: 3 | RNVC: 2

5 Jul 1974

5340-66-154-6173
Cushioning Pad

661546173
471-50806-114: RNCC: 3 | RNVC: 2
509422: RNCC: 5 | RNVC: 2

25 Jul 2006

5340-66-150-4139
Screw Thread Insert And Tool Assortment

661504139
NO PRIMARY REF 66-150-4139: RNCC: 3 | RNVC: 2
06454702: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-161-0887
Mounting Bracket

661610887
P10102-05: RNCC: 3 | RNVC: 2

30 May 2013

5340-66-146-6946
Fire Damper

661466946
MSD-MO-SB-260-220-250-SS: RNCC: 3 | RNVC: 2

9 Aug 2000

5340-66-091-8355
Rigid Caster

660918355
DA68246000-46: RNCC: 3 | RNVC: 2

7 May 1976

5340-66-017-9313
Surface Bolt

660179313
70 SMALL: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-139-4836
Spacing Threaded Standoff

661394836
TD20418-2: RNCC: 3 | RNVC: 2

21 Feb 1995

5340-66-143-4437
Door Frame

661434437
492348-01: RNCC: 3 | RNVC: 2

6 May 1998

5340-66-155-0752
General Purpose Access Door

661550752
ADF041-MC8177-010: RNCC: 3 | RNVC: 2

24 Nov 2006

5340-66-156-0224
Webbing Strap

661560224
471-40226-908T02: RNCC: 3 | RNVC: 2
522563: RNCC: 5 | RNVC: 2

25 Jul 2007

5340-66-160-4890
Mounting Bracket

661604890
P10511-07: RNCC: 3 | RNVC: 2

17 Aug 2012

5340-66-120-6183
Double Angle Bracket

661206183
X50RC351: RNCC: 3 | RNVC: 2
X50RC351: RNCC: 5 | RNVC: 9

19 Sep 1984

5340-66-154-7388
Webbing Strap

661547388
10006012-100: RNCC: 3 | RNVC: 2
10006012-100: RNCC: 5 | RNVC: 2

25 Aug 2006

5340-66-151-1627
Webbing Strap

661511627
561598-DMOC: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-66-154-7117
Mounting Plate

661547117
ARLM0855-1: RNCC: 3 | RNVC: 2

18 Aug 2006

5340-66-158-0623
Mounting Bracket

661580623
TF01800-1: RNCC: 3 | RNVC: 2

22 Jul 2009

5340-66-158-7702
General Purpose Access Door

661587702
BMA-A05-0822-02: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-66-152-5706
Mounting Bracket

661525706
RP400225/A/29: RNCC: 3 | RNVC: 2

16 Nov 2004

5340-66-157-0866
Mounting Bracket

661570866
1728-BH-0917-02: RNCC: 3 | RNVC: 2

21 Jul 2008

5340-66-155-8578
Manual Control Handle

661558578
471-50831-109: RNCC: 3 | RNVC: 2
510223: RNCC: 5 | RNVC: 2

18 Jun 2007

5340-66-155-9097
Double Angle Bracket

661559097
471-50809-217: RNCC: 3 | RNVC: 2
502654: RNCC: 5 | RNVC: 2

27 Jun 2007

5340-66-146-6119
Lid Stay

661466119
A55-997-A2870-0A00: RNCC: 3 | RNVC: 2

7 Jun 2000

5340-66-154-9425
Roller Arm

661549425
471-60803-113: RNCC: 3 | RNVC: 2
504070: RNCC: 5 | RNVC: 2

17 Oct 2006

5340-66-123-4531
Clip

661234531
33-31307-101: RNCC: 3 | RNVC: 2

13 Dec 1985

5340-66-157-6707
Retaining Strap

661576707
D-2662: RNCC: 3 | RNVC: 2

6 Feb 2009

5340-66-140-4154
Handwheel

661404154
FE85089A100X9: RNCC: 3 | RNVC: 2

29 Mar 1995

5340-66-146-9676
Type Rm30 Module

661469676
RM30: RNCC: 3 | RNVC: 2

2 Nov 2000

5340-66-156-5602
Mounting Plate

661565602
6302308: RNCC: 3 | RNVC: 2
15012978: RNCC: 5 | RNVC: 2

16 Jan 2008

5340-66-143-9950
Mounting Bracket

661439950
4252570040: RNCC: 3 | RNVC: 2
4252570040: RNCC: 5 | RNVC: 2

3 Feb 1998

5340-66-132-4809
Rim Lock

661324809
A-CR16-02-3S-NO 11: RNCC: 3 | RNVC: 2

23 Mar 1990

5340-66-147-8796
Guide

661478796
F/2888-570-006A: RNCC: 3 | RNVC: 2

23 Nov 2001

5340-66-147-8598
Deflector Roller

661478598
F/2888-570-009C: RNCC: 3 | RNVC: 2
Q EDE F/2888-570-009C: RNCC: 5 | RNVC: 2

26 Sep 2001

5340-66-049-6688
Pulley Bloc Bracket

660496688
DSD306: RNCC: 3 | RNVC: 2

14 May 1972

5340-66-158-0727
Angle Bracket

661580727
1728-BH-1211-01: RNCC: 3 | RNVC: 2

28 Jul 2009

5340-66-138-9563
Cover

661389563
8261190301: RNCC: 3 | RNVC: 2
2530-97-151-3251: RNCC: C | RNVC: 1

10 Nov 1993

5340-66-158-7637
Mounting Bracket

661587637
BMA-A13-0060-01: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-66-151-0990
Angle Bracket

661510990
LTA-A05-169: RNCC: 3 | RNVC: 2
LTA-A05-169-001: RNCC: 3 | RNVC: 2

15 May 2003

5340-66-158-7642
Mounting Plate

661587642
BMA-A13-0072-01: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-66-160-2526
Manual Control Lever

661602526
6.107.3017: RNCC: 3 | RNVC: 2

9 May 2012

5340-66-091-3203
Snap Hook

660913203
MSA254746: RNCC: 3 | RNVC: 2

23 Aug 1976

5340-66-088-2929
Butt Hinge

660882929
1213-251752: RNCC: 3 | RNVC: 2

20 May 1975

5340-66-147-2632
Bracket

661472632
DAS60261: RNCC: 3 | RNVC: 2

15 Dec 2000

5340-66-157-7995
Dust And Moisture Seal Protective Cap-Plug

661577995
850: RNCC: 3 | RNVC: 2

30 Mar 2009

5340-66-144-5267
Mounting Bracket

661445267
A20914A-11/1: RNCC: 3 | RNVC: 2

4 Dec 1998

5340-66-157-2786
Mounting Bracket

661572786
BMU-A05-2023-01: RNCC: 3 | RNVC: 2

24 Sep 2008

5340-66-132-0095
Drive Adaptor

661320095
201AMR109-1: RNCC: 3 | RNVC: 2

12 May 1989

5340-66-153-2725
Mounting Bracket

661532725
A210 0315-3: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-147-6477
Dust And Moisture Seal Protective Cap

661476477
A55-997-B2180-0A00: RNCC: 3 | RNVC: 2
A53-997-B2180-0A00: RNCC: 5 | RNVC: 2

18 Oct 2001

5340-66-158-3036
Lifting Sling Sleeve

661583036
RD222-35-B-K: RNCC: 3 | RNVC: 2

4 Nov 2009

5340-66-161-3734
Door Closer

661613734
BDI69400-2-9: RNCC: 3 | RNVC: 2

30 Sep 2013

5340-66-158-0733
Angle Bracket

661580733
1728-BH-1218-02: RNCC: 3 | RNVC: 2

28 Jul 2009

5340-66-151-3422
Angle Bracket

661513422
RAY171000-13: RNCC: 3 | RNVC: 2

24 Mar 2004

5340-66-160-3324
Angle Bracket

661603324
BMP-A05-3013-01: RNCC: 3 | RNVC: 2

13 Jun 2012

5340-66-155-5129
General Purpose Resilient Mount

661555129
196630-05920: RNCC: 3 | RNVC: 2

4 Apr 2007

5340-66-110-6648
Dust And Moisture Seal Protective Cap

661106648
CA30107: RNCC: 3 | RNVC: 2

20 Jun 1981

5340-66-158-0083
Manual Control Lever

661580083
JMS2002-64: RNCC: 3 | RNVC: 2

17 Jun 2009

5340-66-140-2199
Mounting Bracket

661402199
024AMR026-1: RNCC: 3 | RNVC: 2

2 Dec 1994

5340-66-142-2879
Access Cover

661422879
6.128.3150: RNCC: 3 | RNVC: 2

15 May 1996

5340-66-155-8832
Foot

661558832
9455 206: RNCC: 3 | RNVC: 2

25 Jun 2007

5340-66-157-3088
Mechanic Equipment Hardware Kit

661573088
AC904-ASSY: RNCC: 3 | RNVC: 2

6 Oct 2008

5340-66-128-8038
Protective A Cover

661288038
640/1/30568: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-66-036-9269
Retaining Strap

5340-66-159-7717
Angle Bracket

661597717
532.30.09.114: RNCC: 3 | RNVC: 2

16 Feb 2012

5340-66-157-5435
Vent Plug

661575435
100695: RNCC: 3 | RNVC: 2
100695: RNCC: 5 | RNVC: 2

15 Dec 2008

5340-66-150-1408
Earplug Quietband L

661501408
NO PRIMARY REF 66-150-1408: RNCC: 3 | RNVC: 2
00220048: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-161-3619
Bumper

661613619
QASM00706-001: RNCC: 3 | RNVC: 2

24 Sep 2013

5340-66-159-7440
Mounting Plate

661597440
15020244: RNCC: 3 | RNVC: 2

30 Jan 2012

5340-66-156-2501
Mounting Plate

661562501
A2100152: RNCC: 3 | RNVC: 2

4 Oct 2007

5340-66-157-3005
Mounting Bracket

661573005
DM0377: RNCC: 3 | RNVC: 2

2 Oct 2008

5340-66-159-8159
Block Clamp

661598159
BMA-A10-0145-01: RNCC: 3 | RNVC: 2

22 Feb 2012

5340-66-159-8087
Mounting Plate

661598087
BMA-A08-0281-01: RNCC: 3 | RNVC: 2

21 Feb 2012

5340-66-150-1580
Dust And Moisture Seal Protective Cap

661501580
NO PRIMARY REF 66-150-1580: RNCC: 3 | RNVC: 2
02922164: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-148-9086
Handle Grip

661489086
94A12A-6-016: RNCC: 3 | RNVC: 2
94A12A-6-016: RNCC: 5 | RNVC: 2

6 Dec 2002

5340-66-126-3033
Access Cover

661263033
75722: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

23 Jan 1991

5340-66-025-9364
Helical Compression Spring Retainer

660259364
EX20048300: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-128-4923
Webbing Strap

661284923
HYG2600: RNCC: 3 | RNVC: 2

4 Jan 1988

5340-66-160-1575
Mounting Bracket

661601575
555.40.09.028: RNCC: 3 | RNVC: 2

19 Apr 2012

5340-66-159-6355
Mounting Plate

661596355
S8-341-310R2: RNCC: 3 | RNVC: 2

16 Nov 2011

5340-66-145-6551
Buckle

661456551
950-1113: RNCC: 3 | RNVC: 2
950-1113: RNCC: 5 | RNVC: 2

23 Nov 1999

5340-66-138-8172
Mounting Bracket

661388172
196630-06190: RNCC: 3 | RNVC: 2

21 Apr 1994

5340-66-142-4634
Mounting Bracket

661424634
471-90423-103T11: RNCC: 3 | RNVC: 2
520654: RNCC: 3 | RNVC: 2

20 Aug 1996

5340-66-138-7065
Mounting Bracket

661387065
120270-61570: RNCC: 3 | RNVC: 2

23 Mar 1994

5340-66-155-5264
Rod End Clevis

661555264
0275C0135: RNCC: 3 | RNVC: 2

11 Apr 2007

5340-66-160-7484
Mounting Plate

661607484
15012147: RNCC: 3 | RNVC: 2

26 Nov 2012

5340-66-161-1650
Mounting Bracket

661611650
15008602: RNCC: 3 | RNVC: 2

10 Jul 2013

5340-66-155-1672
Thrust Plate

661551672
343 563: RNCC: 3 | RNVC: 2

19 Dec 2006

5340-66-154-4876
Manual Control Handle

661544876
M480019D02: RNCC: 3 | RNVC: 2

9 Jun 2006

5340-66-145-9502
Mounting Bracket

661459502
2888-520-019H: RNCC: 3 | RNVC: 2
Q EDE 2888-520-019H: RNCC: 5 | RNVC: 2

16 Oct 2001

5340-66-145-4519
Uut Retainers

661454519
608/2/57792/000: RNCC: 3 | RNVC: 2

20 Sep 1999

5340-66-159-4282
Manual Control Lever

661594282
BMU-A05-2040B01: RNCC: 3 | RNVC: 2

11 Jul 2011

5340-66-037-1850
Access Cover

660371850
EFC62: RNCC: 3 | RNVC: 2

14 Sep 1970

5340-66-094-8595
Safety Release Lock

660948595
R5612: RNCC: 3 | RNVC: 2

21 Apr 1978

5340-66-148-4187
Cleaning Tank Assem

661484187
694484: RNCC: 3 | RNVC: 2

5 Apr 2002

5340-66-056-0309
Dust And Moisture Seal Protective Cap

660560309
241158: RNCC: 3 | RNVC: 2

20 Oct 1972

5340-66-126-9001
General Purpose Resilient Mount

661269001
SILENTBLOC M46FL: RNCC: 3 | RNVC: 2
DE610540084-1: RNCC: 3 | RNVC: 2

3 Sep 1986

5340-66-161-4095
Mounting Bracket

661614095
16-5006/2: RNCC: 3 | RNVC: 2

15 Oct 2013

5340-66-112-3633
Access Cover

661123633
527.20.09.098: RNCC: 3 | RNVC: 2
527.20.09.098: RNCC: 3 | RNVC: 2

20 Aug 1990

5340-66-160-7785
Angle Bracket

661607785
15018462: RNCC: 3 | RNVC: 2

6 Dec 2012

5340-66-154-0838
Stand Base

661540838
DE252010010: RNCC: 3 | RNVC: 2

17 Feb 2006

5340-66-067-1518
Angle Bracket

660671518
G19: RNCC: 3 | RNVC: 2
W4WDA0972: RNCC: 5 | RNVC: 9

14 Aug 1974

5340-66-072-5013
Butt Hinge

660725013
B6.89 BRASS: RNCC: 3 | RNVC: 2
04084802: RNCC: 5 | RNVC: 2
0251-449: RNCC: 5 | RNVC: 9

25 Jun 1974

5340-66-138-8184
Retaining Strap

661388184
196630-11320: RNCC: 3 | RNVC: 2

26 Apr 1994

5340-66-151-9746
Ops Rm Handle Shaft

661519746
ACP2-A01-003-28: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-66-153-5522
Strap Fastener Loop

661535522
RAB-(303)-2656: RNCC: 3 | RNVC: 2
RAB-(303)-2656: RNCC: 5 | RNVC: 2

12 Sep 2005

5340-66-077-9355
Hinged Hasp

660779355
357-127MM: RNCC: 3 | RNVC: 2
HASP: RNCC: 5 | RNVC: 1
0428 2303: RNCC: 5 | RNVC: 2

18 Jul 1972

5340-66-146-3920
Welded An Enclosure

661463920
73264-2-16: RNCC: 3 | RNVC: 2

20 Apr 2000

5340-66-143-1704
Manual Control Lever

661431704
PN 614-97: RNCC: 3 | RNVC: 2

18 Jun 1997

5340-66-142-4637
Mounting Bracket

661424637
471-90423-124: RNCC: 3 | RNVC: 2
516711: RNCC: 3 | RNVC: 2

20 Aug 1996

5340-66-143-0976
Door Closer

661430976
ARROW 737/SH/AC SSS: RNCC: 3 | RNVC: 2

5 May 1997

5340-66-154-7261
Sliding Door Track

661547261
15002238: RNCC: 3 | RNVC: 2

23 Aug 2006

5340-66-154-9205
Mounting Bracket

661549205
471-50807-128: RNCC: 3 | RNVC: 2
506040: RNCC: 5 | RNVC: 2

9 Oct 2006

5340-66-134-5635
Mechanic Equipment Hardware Kit

661345635
502AMR237-1: RNCC: 3 | RNVC: 2

25 Nov 1991

5340-66-143-0972
Escutcheon Plate

661430972
OCE-1: RNCC: 3 | RNVC: 2

2 May 1997

5340-66-029-0100
Electronic Equipment Hardware Kit

660290100
ADE(W)67-1702ISSUE1: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-129-3272
Nonmetalli Retainer

661293272
01DML0004/002 ITEM 29: RNCC: 3 | RNVC: 2
DSD0004/02 SHEET 3 ITEM 29: RNCC: 3 | RNVC: 2

18 Dec 1987

5340-66-144-5249
Mounting Bracket

661445249
A209142-3L/1: RNCC: 3 | RNVC: 2

3 Dec 1998

5340-66-155-3874
Spring Tension Clip

661553874
471-41014-693: RNCC: 3 | RNVC: 2
5235516: RNCC: 5 | RNVC: 2

20 Mar 2007

5340-66-132-2252
Dust Cap Plug

661322252
223593-01: RNCC: 3 | RNVC: 2
A201931: RNCC: 3 | RNVC: 2

24 Aug 1989

5340-66-150-5814
Key Holder

661505814
NO PRIMARY REF 66-150-5814: RNCC: 3 | RNVC: 2
03467242: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-145-8097
Lifting Block

661458097
43/898: RNCC: 3 | RNVC: 2
A3/43/898: RNCC: 3 | RNVC: 2

10 Nov 1999

5340-66-099-6890
General Purpose Resilient Mount

660996890
FBP: RNCC: 3 | RNVC: 1
FRUSTAC0NFBP: RNCC: 3 | RNVC: 1

5 Oct 1978

5340-66-155-7482
Double Angle Bracket

661557482
X50RC470M: RNCC: 3 | RNVC: 2

18 May 2007

5340-66-072-3746
Loop Clamp

660723746
12MMF: RNCC: 3 | RNVC: 2

12 Nov 1970

5340-66-159-0933
Vent Plug

661590933
10006277: RNCC: 3 | RNVC: 2
1/4 IN BREATHER VALVE: RNCC: 5 | RNVC: 2

7 Feb 2011

5340-66-145-8368
Plate

661458368
863.095.67: RNCC: 3 | RNVC: 2

1 Dec 1999

5340-66-087-6633
Key Blank

660876633
1213-26532: RNCC: 3 | RNVC: 2

20 Apr 1975

5340-66-145-2530
Doo Handle Assembly

661452530
P-55952: RNCC: 3 | RNVC: 2

26 Aug 1999

5340-66-122-2675
Angle Bracket

661222675
A1-1174-82-04 S3 ITEM B13: RNCC: 3 | RNVC: 2

29 Apr 1985

5340-66-139-2093
Handwheel

661392093
SCES11456: RNCC: 3 | RNVC: 1
511956: RNCC: 3 | RNVC: 2

27 May 1994

5340-66-150-3970
Infrared Light

661503970
NO PRIMARY REF 66-150-3970: RNCC: 3 | RNVC: 2
02140056: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-153-4116
Mounting Plate

661534116
15012706-01: RNCC: 3 | RNVC: 2

12 Aug 2005

5340-66-148-8910
Pipe Hanger

661488910
5510/1A-PC8: RNCC: 3 | RNVC: 2

15 Nov 2002

5340-66-150-8137
Cushioning Pad

661508137
RW-A0203: RNCC: 3 | RNVC: 2

6 Aug 2003

5340-66-068-0033
Spacing Threaded Standoff

660680033
W1-179A5: RNCC: 3 | RNVC: 2

11 Jul 1974

5340-66-029-8048
Rod End Connector

660298048
T58: RNCC: 3 | RNVC: 2

26 Oct 1968

5340-66-159-8430
Mounting Bracket

661598430
BHB010: RNCC: 3 | RNVC: 2

2 Mar 2012

5340-66-111-4777
General Purpose Resilient Mount

661114777
R73P: RNCC: 3 | RNVC: 2

12 Jun 1981

5340-66-158-2780
Mounting Bracket

661582780
D511: RNCC: 3 | RNVC: 2
D511: RNCC: 5 | RNVC: 2

22 Oct 2009

5340-66-139-5673
Stand Control Weldm

661395673
56W4-S115PC1: RNCC: 3 | RNVC: 1
56W4-S115PC1: RNCC: 3 | RNVC: 2

24 Jun 1994

5340-66-161-4092
Angle Bracket

661614092
16-5010/1: RNCC: 3 | RNVC: 2

15 Oct 2013

5340-66-017-4673
Mounting Bracket

660174673
ADE(V)225-77: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-024-0131
Spacing Threaded Standoff

660240131
ADE(W)28-102: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-090-7391
Angle Bracket

5340-66-120-6746
Fwd. Hinge Half

661206746
12S1796-11-128: RNCC: 3 | RNVC: 2

13 Oct 1986

5340-66-148-3203
Webbing Strap

661483203
2902-DWG-58-M-9116 ITEMC: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-66-150-3928
Butt Hinge

661503928
NO PRIMARY REF 66-150-3928: RNCC: 3 | RNVC: 2
00735455: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-147-9396
Male Camlock To Bsp

661479396
AF065: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-66-076-3386
Line Supporting Strap

660763386
H335BN04: RNCC: 3 | RNVC: 2

20 Jul 1974

5340-66-026-2528
Luggage Lock

660262528
ADE(M)282-1: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-152-7830
Mounting Bracket

661527830
HRV120101004: RNCC: 3 | RNVC: 2

17 Mar 2005

5340-66-014-3778
Padlock

660143778
NO PRIMARY REF 66-014-3778: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-138-6952
Helical Compression Spring Retainer

661386952
120270-11190: RNCC: 3 | RNVC: 2

29 Mar 1994

5340-66-033-1118
Spring

660331118
203697: RNCC: 3 | RNVC: 2

1 Aug 1969

5340-66-019-7240
Suction Cup

660197240
2586-2: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-130-7147
Webbing Strap

661307147
1529/1: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

4 Jun 1988

5340-66-034-2902
Mounting Bush

660342902
EX2005067: RNCC: 3 | RNVC: 2

9 Dec 1969

5340-66-151-1691
Webbing Strap

661511691
LTA-A05-005-001: RNCC: 3 | RNVC: 2
LTA-A05-005: RNCC: 5 | RNVC: 2

1 Jul 2003

5340-66-155-9296
Loop Clamp

661559296
KAB80-4086-16-2: RNCC: 3 | RNVC: 2
1082516: RNCC: 5 | RNVC: 2

2 Jul 2007

5340-66-128-8506
Angle Bracket

661288506
AYG2979: RNCC: 3 | RNVC: 2
0068-00-000-2979: RNCC: C | RNVC: 1

2 Dec 1993

5340-66-146-0861
Brace Bracket

661460861
438 0525-01: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-66-139-2916
Angle Bracket

661392916
DE250530191: RNCC: 3 | RNVC: 2

12 Aug 1994

5340-66-033-6852
Butt Hinge Leaf

660336852
SM-C-447121-2: RNCC: 3 | RNVC: 2

21 Oct 1969

5340-66-154-2139
Fixing Plate

661542139
S0E80A1E1817/061: RNCC: 3 | RNVC: 2

24 Mar 2006

5340-66-151-1636
Mounting Plate

661511636
LTA-A08-0059: RNCC: 3 | RNVC: 2
LTA-A08-0059-01: RNCC: 3 | RNVC: 2

25 Jun 2003

5340-66-155-3789
Double Angle Bracket

661553789
525.72.09.640: RNCC: 3 | RNVC: 2

15 Mar 2007

5340-66-066-4236
Loop Clamp

660664236
174503K: RNCC: 3 | RNVC: 2

7 Feb 1974

5340-66-150-7834
Angle Bracket

661507834
LTA-A10-024-001: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-66-150-0212
Rigid Caster

661500212
NO PRIMARY REF 66-150-0212: RNCC: 3 | RNVC: 2
04788807: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-161-2061
Loop Clamp

661612061
10001179-06: RNCC: 3 | RNVC: 2
TRLC6P: RNCC: 5 | RNVC: 2

23 Jul 2013

5340-66-144-1052
Hand Crank

661441052
S-1706-015: RNCC: 3 | RNVC: 2
S-1706-015: RNCC: 5 | RNVC: 2

17 Jun 1998

5340-66-157-3091
Rim Latch

661573091
1000073: RNCC: 3 | RNVC: 2
2.00.01.01/6: RNCC: 5 | RNVC: 2

6 Oct 2008

5340-66-128-0304
Mounting Bracket

661280304
571.10.09.206: RNCC: 3 | RNVC: 2

14 May 1996

5340-66-156-4415
Webbing Strap

661564415
10006013-040: RNCC: 3 | RNVC: 2
10006013-040: RNCC: 3 | RNVC: 2
10006013-040: RNCC: 5 | RNVC: 2

27 Nov 2007

5340-66-155-7407
Double Angle Bracket

661557407
471-20207-530: RNCC: 3 | RNVC: 2
510367: RNCC: 5 | RNVC: 2

17 May 2007

5340-66-154-2603
Spring Holder

661542603
S0002A1E4090-712: RNCC: 3 | RNVC: 2

6 Apr 2006

5340-66-112-0251
Mounting Plate

661120251
37312-11: RNCC: 3 | RNVC: 2

28 Aug 1981

5340-66-106-9095
Retaining Strap

661069095
180-16: RNCC: 3 | RNVC: 2

22 Jun 1980

5340-66-161-4069
Catch Strike

661614069
224002-5: RNCC: 3 | RNVC: 2

14 Oct 2013

5340-66-136-4678
Dust And Moisture Seal Protective Plug

661364678
CES17673ITEM21: RNCC: 3 | RNVC: 2
DUSTPLUG,MALE100MM.PT.NO H: RNCC: 5 | RNVC: 2

24 Mar 1993

5340-66-032-8915
Loop Clamp

660328915
309040: RNCC: 3 | RNVC: 2

29 Jul 1969

5340-66-156-3022
Mounting Bracket

661563022
15007792: RNCC: 3 | RNVC: 2

25 Oct 2007

5340-66-155-5075
Lever Cover

661555075
196630-03640: RNCC: 3 | RNVC: 2

3 Apr 2007

5340-66-151-1693
Mounting Bracket

661511693
LTA-A07-004-001: RNCC: 3 | RNVC: 2
LTA-A07-004: RNCC: 5 | RNVC: 2

1 Jul 2003

5340-66-139-4547
Rod End Clevis

661394547
01-06-02: RNCC: 3 | RNVC: 1

1 Dec 1994

5340-66-159-1425
Mounting Bracket

661591425
043274A-00: RNCC: 3 | RNVC: 2

7 Mar 2011

5340-66-151-0798
Padlock

661510798
MC-2533: RNCC: 3 | RNVC: 2

20 May 2003

5340-66-143-5839
Electronic Equipment Hardware Kit

661435839
MX-F248: RNCC: 3 | RNVC: 1

16 Sep 1997

5340-66-160-3327
Mounting Bracket

661603327
BMP-A18-2015-01: RNCC: 3 | RNVC: 2

13 Jun 2012

5340-66-153-5186
Extension Frame

661535186
5244624067: RNCC: 3 | RNVC: 2
5244624067: RNCC: 5 | RNVC: 2

1 Sep 2005

5340-66-154-7383
Webbing Strap

661547383
10006012-045: RNCC: 3 | RNVC: 2
10006012-045: RNCC: 5 | RNVC: 2

25 Aug 2006

5340-66-029-6760
Poker

660296760
MGO(M)1002 ITEM 5: RNCC: 3 | RNVC: 2

16 Oct 1968

5340-66-160-2128
Angle Bracket

661602128
ARLM0800-1: RNCC: 3 | RNVC: 2

30 Apr 2012

5340-66-033-6631
General Purpose Access Door

660336631
30-31210-1: RNCC: 3 | RNVC: 2

20 Sep 1969

5340-66-095-7323
Spring Tension Clip

660957323
22316-523-0-0: RNCC: 3 | RNVC: 2

9 Oct 1977

5340-66-155-1642
Mounting Plate

661551642
694595: RNCC: 3 | RNVC: 2

19 Dec 2006

5340-66-159-0845
Mounting Bracket

661590845
471-RH000-114-T03: RNCC: 3 | RNVC: 2
1730149: RNCC: 5 | RNVC: 2

2 Feb 2011

5340-66-037-1982
Angle Bracket

660371982
ADE(V)94-155: RNCC: 3 | RNVC: 2

13 Nov 1970

5340-66-161-0726
Track Stop

661610726
BMA-A07-0039-01: RNCC: 3 | RNVC: 2

20 May 2013

5340-66-131-5282
T-Bolt Clamp

661315282
61320S1: RNCC: 3 | RNVC: 2

1 Dec 1988

5340-66-156-0206
Mounting Bracket

661560206
ARLM0586-1: RNCC: 3 | RNVC: 2

25 Jul 2007

5340-66-147-8857
Cover Plate

661478857
F/2888-535-002E: RNCC: 3 | RNVC: 2

28 Nov 2001

5340-66-147-7636
Sproket Assembly

661477636
6671410-9: RNCC: 3 | RNVC: 2
6671410-9: RNCC: C | RNVC: 1

13 Aug 2001

5340-66-021-3142
Spring Tension Clip

660213142
22106 5/16 IN.: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-142-9113
Catch Strike

661429113
658/2/06580/000: RNCC: 3 | RNVC: 2

3 Mar 1997

5340-66-157-7832
Mounting Plate

661577832
BMA-A05-0465: RNCC: 3 | RNVC: 2

25 Mar 2009

5340-66-122-5099

5340-66-125-2006

5340-66-155-9538
Retaining Strap

661559538
P471-90000-122T02: RNCC: 3 | RNVC: 2
1087770: RNCC: 5 | RNVC: 2

10 Jul 2007

5340-66-157-4817
Retaining Strap

661574817
V0507-CE-1417: RNCC: 3 | RNVC: 2

27 Nov 2008

5340-66-155-1622
Mounting Bracket

661551622
5232370241: RNCC: 3 | RNVC: 2
15011929: RNCC: 5 | RNVC: 2

19 Dec 2006

5340-66-151-8087
Loop Clamp

661518087
LTA-A07-060: RNCC: 3 | RNVC: 1
LT2402: RNCC: 3 | RNVC: 2
HT 1113: RNCC: 5 | RNVC: 2

19 Sep 2003

5340-66-151-1663
Access Cover

661511663
LTA-A07-069: RNCC: 3 | RNVC: 2
LTA-A07-069-001: RNCC: 3 | RNVC: 2

26 Jun 2003

5340-66-151-1025
Mounting Bracket

661511025
LTE-A05-0022: RNCC: 3 | RNVC: 2
LTE-A05-0022-01: RNCC: 3 | RNVC: 2

21 May 2003

5340-66-126-2291
Loop Clamp

661262291
90465-11M10: RNCC: 3 | RNVC: 2

19 Dec 1990

5340-66-153-5498
Buckle

661535498
RAB-(303)-1327: RNCC: 3 | RNVC: 2
RAB-(303)-1327: RNCC: 5 | RNVC: 2

12 Sep 2005

5340-66-155-3694
Angle Bracket

661553694
471-40217-206: RNCC: 3 | RNVC: 2
508694: RNCC: 5 | RNVC: 2

14 Mar 2007

5340-66-159-7318
Webbing Strap

661597318
X/C/0039/17: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-66-122-6466
Bracket

661226466
DE580160286: RNCC: 3 | RNVC: 2

12 Dec 1984

5340-66-152-2587
Butt Hinge

661522587
HIB650: RNCC: 3 | RNVC: 2

30 Sep 2004

5340-66-156-7249
Extension Drawer Slide

661567249
BMF-V05-0009-01: RNCC: 3 | RNVC: 2

7 Mar 2008

5340-66-149-0482
Pressure Rel Patch

661490482
015-4103-020: RNCC: 3 | RNVC: 2
015-4103-020: RNCC: 5 | RNVC: 2

11 Oct 2002

5340-66-126-1294
Retaining Clip

661261294
223596-01: RNCC: 3 | RNVC: 2
A201961: RNCC: 3 | RNVC: 2

5 Nov 1990

5340-66-152-3018
Permanent Magnet

661523018
NO PRIMARY REF 66-152-3018: RNCC: 3 | RNVC: 2
09160709: RNCC: 5 | RNVC: 2

18 Jun 2004

5340-66-147-7837
Extensi Bearing Pad

661477837
F/2888-540-004D: RNCC: 3 | RNVC: 2
Q EDE F/2888-540-004D: RNCC: 5 | RNVC: 2

19 Sep 2001

5340-66-107-3253
Anti-Crack Strip

661073253
01F379-1: RNCC: 3 | RNVC: 2

18 Jul 1980

5340-66-132-0868
Mounting Bracket

661320868
GH1018/6: RNCC: 3 | RNVC: 2

19 Apr 1989

5340-66-123-8528
Mounting Bracket

661238528
ARLM0118-009: RNCC: 3 | RNVC: 2

2 Nov 1998

5340-66-160-1136
Electronic Equipment Hardware Kit

661601136
PN107504: RNCC: 3 | RNVC: 2

3 Apr 2012

5340-66-024-8223
Padlock

660248223
234: RNCC: 3 | RNVC: 2
234: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-66-158-6142
Mounting Bracket

661586142
006609-001-1: RNCC: 3 | RNVC: 2

19 Apr 2010

5340-66-146-3292
Bottom Spacer

661463292
73016-3-43: RNCC: 3 | RNVC: 2

7 Apr 2000

5340-66-159-4186
Swivel Caster

661594186
QTQ150G/MZPTB: RNCC: 3 | RNVC: 2
0683-2307/MTQ150G/MZPTB: RNCC: 5 | RNVC: 2
DY-HP-02-0037: RNCC: 5 | RNVC: 2

5 Jul 2011

5340-66-094-6571
Access Cover

660946571
800128-19: RNCC: 3 | RNVC: 2

17 Apr 1977

5340-66-159-8712
Clamping Catch

661598712
29.569SS: RNCC: 3 | RNVC: 1
1138.17(W/O HOOK): RNCC: 3 | RNVC: 1
1138.17-P1(CATCH): RNCC: 3 | RNVC: 2
QVRL113817P1CATCH: RNCC: 5 | RNVC: 2
1138.17-P1 (CATCH): RNCC: 6 | RNVC: 9

7 Mar 2012

5340-66-093-6944
Access Cover

660936944
163P/0215/014 TYPE E: RNCC: 3 | RNVC: 2

13 Jul 1978

5340-66-150-2475
Angle Bracket

661502475
NO PRIMARY REF 66-150-2475: RNCC: 3 | RNVC: 2
05969515: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-155-0840
Mounting Bracket

661550840
17445703: RNCC: 3 | RNVC: 2
17445703: RNCC: 5 | RNVC: 2

28 Nov 2006

5340-66-153-2964
Manual Control Handle

661532964
DE 100450050: RNCC: 3 | RNVC: 2

7 Jul 2005

5340-66-156-5661
Padlock

661565661
2007012-01: RNCC: 3 | RNVC: 2
FA6332SAA: RNCC: 5 | RNVC: 2
FA6332SAA: RNCC: 5 | RNVC: 2

18 Jan 2008

5340-66-147-2593
Panel

661472593
DAP175C: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-66-147-3855
Pulley Idler Guide

661473855
0269300002: RNCC: 3 | RNVC: 2

24 Apr 2001

5340-66-155-4419
Access Cover

661554419
208-43-71680: RNCC: 3 | RNVC: 2
208-43-71680: RNCC: 5 | RNVC: 2

27 Mar 2007

5340-66-158-1746
Mounting Bracket

661581746
56/4CB: RNCC: 3 | RNVC: 2

15 Sep 2009

5340-66-147-8592
Rope Guide

661478592
F/2888-530-003K: RNCC: 3 | RNVC: 2
Q EDE F/2888-530-003K: RNCC: 5 | RNVC: 2

26 Sep 2001

5340-66-148-5071
Access Cover

661485071
OED-1749-18-46: RNCC: 3 | RNVC: 2

23 May 2002

5340-66-155-4774
Mechanical Stop

661554774
196630-05660: RNCC: 3 | RNVC: 2

30 Mar 2007

5340-66-147-8692
Sign Holder

661478692
F/2888-599-052A: RNCC: 3 | RNVC: 2
Q EDE F/2888-599-052A: RNCC: 5 | RNVC: 2

15 Oct 2001

5340-66-156-2885
Manual Control Handle

661562885
H010: RNCC: 3 | RNVC: 2

23 Oct 2007

5340-66-154-1927
Mechanical Seal Cover

661541927
S0E56A1E4860/521: RNCC: 3 | RNVC: 2

21 Mar 2006

5340-66-155-8577
Access Cover

661558577
471-60803-107: RNCC: 3 | RNVC: 2
504064: RNCC: 5 | RNVC: 2

18 Jun 2007

5340-66-157-8702
Angle Bracket

661578702
BMA-A19-0169-01: RNCC: 3 | RNVC: 2

28 Apr 2009

5340-66-131-5650
Loop Clamp

661315650
299414C1: RNCC: 3 | RNVC: 2

7 Dec 1988

5340-66-155-3379
Rod End Connector

661553379
275C-0259: RNCC: 3 | RNVC: 2

7 Mar 2007

5340-66-157-1318
Access Cover

661571318
22M-54-21102: RNCC: 3 | RNVC: 2
22M-54-21102: RNCC: 5 | RNVC: 2

8 Aug 2008

5340-66-154-9909
Mandrel

661549909
275U-0306: RNCC: 3 | RNVC: 2
1660070: RNCC: 5 | RNVC: 2

2 Nov 2006

5340-66-152-0201
Mounting Bracket

661520201
BMA-A05-0452-01: RNCC: 3 | RNVC: 2

14 Sep 2004

5340-66-031-3732
Spring Tension Clip

660313732
SC02024-17-2: RNCC: 3 | RNVC: 2

7 Feb 1969

5340-66-085-5005
General Purpose Resilient Mount

660855005
4-121-1550: RNCC: 3 | RNVC: 2
5340MS4-121-1550: RNCC: 5 | RNVC: 9

8 Jan 1976

5340-66-145-4674
Mounting Bracket

661454674
608/2/57517/001: RNCC: 3 | RNVC: 2

23 Sep 1999

5340-66-147-2174
Kit Cap

661472174
C31-A03-060-001: RNCC: 3 | RNVC: 2

20 Dec 2000

5340-66-138-9359
Plug

661389359
68980-90300: RNCC: 3 | RNVC: 2
2530-97-151-3270: RNCC: C | RNVC: 1

29 Oct 1993

5340-66-159-6425
Angle Bracket

661596425
049659A-00: RNCC: 3 | RNVC: 2

17 Nov 2011

5340-66-155-5622
Angle Bracket

661555622
471-30020-106: RNCC: 3 | RNVC: 2
514510: RNCC: 5 | RNVC: 2

16 Apr 2007

5340-66-145-8035
Latch

661458035
92/285: RNCC: 3 | RNVC: 2

10 Nov 1999

5340-66-158-7690
Access Door Hinge

661587690
BMA-A05-1618-01: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-66-156-1785
Retaining Strap

661561785
ZA050: RNCC: 3 | RNVC: 2

17 Sep 2007

5340-66-141-1049
General Purpose Resilient Mount

661411049
66498: RNCC: 3 | RNVC: 2
C30/36A: RNCC: 3 | RNVC: 2

14 Sep 1995

5340-66-088-5099
Mount Resil Ferrule

660885099
13-26221: RNCC: 3 | RNVC: 2

1 Feb 1976

5340-66-145-7290
Backplane Support

5340-66-138-9651
Mounting Bracket

5340-66-131-4424
Rear Bracket

5340-66-090-7390
Bow Handle

5340-66-026-8180
Clip

660268180
117957-024: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-144-2244
Loop Clamp

661442244
SS-32-35-N1: RNCC: 3 | RNVC: 2

22 Jul 1998

5340-66-138-9372
Brace

661389372
4355830193: RNCC: 3 | RNVC: 2
0064-35-583-0193: RNCC: C | RNVC: 1

2 Nov 1993

5340-66-134-9859
Pipe Hanger

661349859
CP1090-7: RNCC: 3 | RNVC: 2

16 Jan 1991

5340-66-126-9002
General Purpose Resilient Mount

661269002
SILENTBLOC M81FL: RNCC: 3 | RNVC: 2
DE610540084-2: RNCC: 3 | RNVC: 2

3 Sep 1986

5340-66-138-8249
Lock-Release Lever

661388249
196640-12061: RNCC: 3 | RNVC: 2

26 Apr 1994

5340-66-150-7487
Access Cover

661507487
9052069090: RNCC: 3 | RNVC: 2

11 Jun 2003

5340-66-152-0167
Mounting Bracket

661520167
ASG2034: RNCC: 3 | RNVC: 2

8 Sep 2004

5340-66-154-6335
Barrier Air System

661546335
6-127-3011: RNCC: 3 | RNVC: 2

1 Aug 2006

5340-66-144-8927
Buckle

661448927
43-0071-2: RNCC: 3 | RNVC: 2

23 Apr 1999

5340-66-150-4055
Clamping Catch

661504055
NO PRIMARY REF 66-150-4055: RNCC: 3 | RNVC: 2
01709354: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-151-1708
Access Cover

661511708
LTE-A16-0003-01: RNCC: 3 | RNVC: 2
LTE-A16-0003: RNCC: 5 | RNVC: 2

2 Jul 2003

5340-66-151-5766
Angle Bracket

661515766
LTA-A07-0078: RNCC: 3 | RNVC: 1
LTA-A07-0078-01: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-66-157-9928
General Purpose Resilient Mount

661579928
012015AA: RNCC: 3 | RNVC: 2
012015AA: RNCC: 5 | RNVC: 2

15 Jun 2009

5340-66-159-5857
General Purpose Resilient Mount

661595857
NO PRIMARY REF 66-159-5857: RNCC: 3 | RNVC: 2
K1401-B: RNCC: 5 | RNVC: 2

14 Oct 2011

5340-66-158-7704
Mounting Plate

661587704
BMA-A05-1526-01: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-66-150-0225
Swivel Caster

661500225
NO PRIMARY REF 66-150-0225: RNCC: 3 | RNVC: 2
04804008: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-156-3180
Mounting Bracket

661563180
15013560: RNCC: 3 | RNVC: 2

29 Oct 2007

5340-66-019-5654
Expansion Plug

660195654
TYPE A: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-156-3317
Mounting Bracket

661563317
DE252890003: RNCC: 3 | RNVC: 2

31 Oct 2007

5340-66-033-6722
Dust And Moisture Seal Protective Plug

660336722
DC1679: RNCC: 3 | RNVC: 2

23 Sep 1969

5340-66-156-0223
Webbing Strap

661560223
471-40226-907: RNCC: 3 | RNVC: 2
522561: RNCC: 5 | RNVC: 2

25 Jul 2007

5340-66-158-3268
Quick Release Plunger

661583268
FPNWN20F010R: RNCC: 3 | RNVC: 2
2 0167-548: RNCC: 5 | RNVC: 2

13 Nov 2009

5340-66-027-2274
Retaining Strap

660272274
261 3-4IN: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-158-0545
General Purpose Access Door

661580545
7FJ3060A59G07: RNCC: 3 | RNVC: 2

15 Jul 2009

5340-66-139-6922

5340-66-144-2758
Locknut Shroud

5340-66-150-0377
Barrel Bolt

661500377
NO PRIMARY REF 66-150-0377: RNCC: 3 | RNVC: 2
00602758: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-155-0350
Rod End Clevis

661550350
471-40215-101: RNCC: 3 | RNVC: 1
511775: RNCC: 5 | RNVC: 2

20 Nov 2006

5340-66-134-9748
Headless Straight Rod

661349748
400104013: RNCC: 3 | RNVC: 2

17 Jan 1991

5340-66-110-8158
Pipe Hanger

661108158
182: RNCC: 3 | RNVC: 1

7 Feb 1984

5340-66-147-3539
Palm Emerg Coupling

661473539
FD1606: RNCC: 3 | RNVC: 2

30 Mar 2001

5340-66-143-6428
T Bracket

661436428
VII(01)(PORT AFT): RNCC: 3 | RNVC: 2

7 Oct 1997

5340-66-143-4297
Door Plate

661434297
492465: RNCC: 3 | RNVC: 2

24 Apr 1998

5340-66-160-2185
Dust And Moisture Seal Protective Cover

661602185
BMA-A05-1464-01: RNCC: 3 | RNVC: 2

1 May 2012

5340-66-155-6474
Mounting Bracket

661556474
4000-48067000: RNCC: 3 | RNVC: 2
48067-000: RNCC: 5 | RNVC: 2

2 May 2007

5340-66-153-7788
Loop Clamp

661537788
952624-5: RNCC: 3 | RNVC: 2
952624-5: RNCC: 5 | RNVC: 2
952624-5: RNCC: 5 | RNVC: 2

28 Oct 2005

5340-66-154-5223
Access Cover

661545223
471-61006-211: RNCC: 3 | RNVC: 2
514328: RNCC: 5 | RNVC: 2

23 Jun 2006

5340-66-159-6201
Mounting Bracket

661596201
P10488-100: RNCC: 3 | RNVC: 2

7 Nov 2011

5340-66-017-4097
Strap End Clip

660174097
ADE(M)183-14: RNCC: 3 | RNVC: 2
ARMY(AUST)374: RNCC: 4 | RNVC: 1

1 Jan 1968

5340-66-157-5228
Webbing Strap

661575228
X/C/0052/13: RNCC: 3 | RNVC: 2

9 Dec 2008

5340-66-154-0012
Handle Assembly

661540012
183250-66500: RNCC: 3 | RNVC: 2

19 Jan 2006

5340-66-155-9289
Angle Bracket

661559289
555.40.09.052: RNCC: 3 | RNVC: 2

2 Jul 2007

5340-66-142-9632
Conduit Clamp

661429632
658/2/05808/000: RNCC: 3 | RNVC: 2

1 Apr 1997

5340-66-056-1203
Nonmetallic Bumper

660561203
TSE(W)8-212: RNCC: 3 | RNVC: 2
Z1TSEW8-212: RNCC: 5 | RNVC: 9

27 Nov 1972

5340-66-158-3551
Flush Catch

661583551
N4-1-303-1-5: RNCC: 3 | RNVC: 2
DF01-602-5: RNCC: 5 | RNVC: 2

24 Nov 2009

5340-66-131-7404
Manual Control Lever

661317404
576.10.09.091: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-66-158-9442
Webbing Strap

661589442
10006014-065: RNCC: 3 | RNVC: 2
10006014-065: RNCC: 5 | RNVC: 2

3 Nov 2010

5340-66-128-3441
Manual Control Handle

661283441
CR-2-12: RNCC: 3 | RNVC: 2

15 Apr 1987

5340-66-157-9205
Mounting Plate

661579205
503 14 26-01: RNCC: 3 | RNVC: 2
503 14 26-01: RNCC: 5 | RNVC: 2

15 May 2009

5340-66-159-7466
Locking Assembly

661597466
840629-1-A35-B32-C1/2343: RNCC: 3 | RNVC: 2

31 Jan 2012

5340-66-066-4245
Corner Brace

660664245
177522K: RNCC: 3 | RNVC: 2

27 Feb 1974

5340-66-153-8910
Webbing Strap

661538910
600489: RNCC: 3 | RNVC: 2
600489: RNCC: 5 | RNVC: 2

24 Nov 2005

5340-66-154-3129
Dust And Moisture Seal Protective Cap-Plug

661543129
CP57B: RNCC: 3 | RNVC: 2

21 Apr 2006

5340-66-147-3779
Catch Strike

661473779
0030377068: RNCC: 3 | RNVC: 2

12 Apr 2001

5340-66-158-2001
Dust And Moisture Seal Protective Cap

661582001
MWH3300217: RNCC: 3 | RNVC: 2

24 Sep 2009

5340-66-158-3274
Manual Control Lever

661583274
P10343-02: RNCC: 3 | RNVC: 2

13 Nov 2009

5340-66-155-4117
General Purpose Resilient Mount

661554117
201-01-71250: RNCC: 3 | RNVC: 2
201-01-71250: RNCC: 5 | RNVC: 2

23 Mar 2007

5340-66-157-5272
Double Angle Bracket

661575272
V01-15-01-50-01: RNCC: 3 | RNVC: 2

10 Dec 2008

5340-66-155-5612
Access Cover

661555612
471-30205-22: RNCC: 3 | RNVC: 2
507049: RNCC: 5 | RNVC: 2

16 Apr 2007

5340-66-145-0702
Rubber Foot

661450702
3-387-476-01: RNCC: 3 | RNVC: 2
3-387-476-01: RNCC: 5 | RNVC: 2

12 Jul 1999

5340-66-157-7541
Manual Control Handle

661577541
P10147-02: RNCC: 3 | RNVC: 2

13 Mar 2009

5340-66-153-8355
Retaining Strap

661538355
MTC-3133: RNCC: 3 | RNVC: 2

15 Nov 2005

5340-66-157-8804
Mounting Plate

661578804
BMA-A19-0075-01: RNCC: 3 | RNVC: 2

1 May 2009

5340-66-157-3188
Locking Stay

661573188
MM-0080-Z231: RNCC: 3 | RNVC: 2

8 Oct 2008

5340-66-160-6538
Mounting Bracket

661606538
ID25-244: RNCC: 3 | RNVC: 2

3 Oct 2012

5340-66-139-9396
Mounting-Shore Bar

661399396
471-21209-308: RNCC: 3 | RNVC: 2

22 Sep 1994

5340-66-159-7202
Webbing Strap

661597202
3004-0049: RNCC: 3 | RNVC: 2

5 Jan 2012

5340-66-158-9247
Spacing Threaded Standoff

661589247
TF01919-1: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-66-143-7278
Mounting Bracket

661437278
658/2/05672/000: RNCC: 3 | RNVC: 2

4 Jul 1997

5340-66-144-3592
Motor Stand Spacer

661443592
RWC 6553/007: RNCC: 3 | RNVC: 2

9 Oct 1998

5340-66-090-4737
Retaining Strap

660904737
564/2: RNCC: 3 | RNVC: 2
01878455: RNCC: 5 | RNVC: 2

10 Oct 1975

5340-66-143-3915
Clamp

661433915
322369: RNCC: 3 | RNVC: 2

22 Apr 1998

5340-66-144-6763
Webbing Strap

661446763
438R: RNCC: 3 | RNVC: 2

30 Mar 1999

5340-66-091-5208
Leather Strap

660915208
AT11713: RNCC: 3 | RNVC: 2

24 Mar 1976

5340-66-152-5104
Butt Hinge

661525104
DE251310009: RNCC: 3 | RNVC: 2

7 Mar 2005

5340-66-096-8411
Assy Prong

660968411
31765A: RNCC: 3 | RNVC: 2

7 May 1978

5340-66-101-5312
Protection Plug

661015312
027-05842: RNCC: 3 | RNVC: 2

3 May 1979

5340-66-140-3760
Mounting Bracket

661403760
HOTT-08: RNCC: 3 | RNVC: 2

16 Mar 1995

5340-66-155-8901
Mounting Bracket

661558901
471-50809-123: RNCC: 3 | RNVC: 2
502557: RNCC: 5 | RNVC: 2

25 Jun 2007

5340-66-145-4672
Mounting Bracket

661454672
608/2/57420/003: RNCC: 3 | RNVC: 2

23 Sep 1999

5340-66-153-8567
Dust And Moisture Seal Protective Cap

661538567
CS-25: RNCC: 3 | RNVC: 2
CS-25: RNCC: 5 | RNVC: 2

17 Nov 2005

5340-66-157-4679
Retaining Strap

661574679
V0507-CE-1515: RNCC: 3 | RNVC: 2

26 Nov 2008

5340-66-133-5608
Pclip

661335608
MS25281-R10: RNCC: 3 | RNVC: 2

3 Nov 1989

5340-66-155-5551
Mounting Plate

661555551
68GG37: RNCC: 3 | RNVC: 2

13 Apr 2007

5340-66-156-7689
Latch Bar

661567689
471-51631-120: RNCC: 3 | RNVC: 2
524527: RNCC: 5 | RNVC: 2

27 Mar 2008

5340-66-154-9505
Nut And Bolt Locking Plate

661549505
471-22430-104: RNCC: 3 | RNVC: 2
1601325: RNCC: 5 | RNVC: 2

18 Oct 2006

5340-66-150-0201
Rigid Caster

661500201
NO PRIMARY REF 66-150-0201: RNCC: 3 | RNVC: 2
04806802: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-154-8527
Blank Panel

661548527
15010478-12: RNCC: 3 | RNVC: 2

19 Sep 2006

5340-66-150-5303
Antipilferage Seal Locking Wire

661505303
NO PRIMARY REF 66-150-5303: RNCC: 3 | RNVC: 2
00731000: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-145-9620
Webbing Strap

661459620
1151A00-02: RNCC: 3 | RNVC: 2

30 Oct 2001

5340-66-150-0241
Swivel Caster

661500241
NO PRIMARY REF 66-150-0241: RNCC: 3 | RNVC: 2
00353464: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-155-4891
Manual Control Handle

661554891
196630-06170: RNCC: 3 | RNVC: 2

2 Apr 2007

5340-66-147-9399
Female Camlock To B

661479399
AB050: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-66-107-6771
Mounting Bracket

661076771
DE230010300-2: RNCC: 3 | RNVC: 2

20 Feb 1981

5340-66-155-3752
Rod End Clevis

661553752
471-41243-121: RNCC: 3 | RNVC: 2
512469: RNCC: 5 | RNVC: 2

15 Mar 2007

5340-66-055-5786
Retaining Clip

660555786
DA68248000-16: RNCC: 3 | RNVC: 2

2 Nov 1972

5340-66-024-2864
Strap End Clip

660242864
ADE(M)183-11: RNCC: 3 | RNVC: 2
374: RNCC: 4 | RNVC: 1

1 Jan 1968

5340-66-138-6336
Track Stop

661386336
1/B2-12-305: RNCC: 3 | RNVC: 2

25 Feb 1994

5340-66-160-7847
Butt Hinge

661607847
ACP2-A01-009-2: RNCC: 3 | RNVC: 2

10 Dec 2012

5340-66-150-0772
Expansion Shield

661500772
NO PRIMARY REF 66-150-0772: RNCC: 3 | RNVC: 2
01794108: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-160-9119
Webbing Strap

661609119
10006013-065: RNCC: 3 | RNVC: 2

4 Mar 2013

5340-66-139-6654
Snap Hook

661396654
RF6320: RNCC: 3 | RNVC: 2
RF947: RNCC: 5 | RNVC: 9
RF947: RNCC: 5 | RNVC: 9

29 Jun 1994

5340-66-122-6463
Bracket

661226463
DE580180211: RNCC: 3 | RNVC: 2

11 Dec 1984

5340-66-155-7549
Angle Bracket

661557549
X50QE243A: RNCC: 3 | RNVC: 2

22 May 2007

5340-66-152-3784
Mounting Plate

661523784
DE250900062: RNCC: 3 | RNVC: 2

13 Oct 2004

5340-66-154-2271
Padlock

661542271
234B45/119/5KD: RNCC: 3 | RNVC: 2

29 Mar 2006

5340-66-160-3509
Mounting Plate

661603509
CIB-BMT-2016-01: RNCC: 3 | RNVC: 2

22 Jun 2012

5340-66-144-0102
Electronic Equipment Hardware Kit

661440102
MX-F342: RNCC: 3 | RNVC: 1

17 Dec 1997

5340-66-150-0765
Expansion Shield

661500765
NO PRIMARY REF 66-150-0765: RNCC: 3 | RNVC: 2
01793507: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-142-2881
Access Cover

661422881
6.128.3149: RNCC: 3 | RNVC: 2

15 May 1996

5340-66-158-0543
General Purpose Access Door

661580543
7FJ3060A59G03: RNCC: 3 | RNVC: 2

15 Jul 2009

5340-66-114-3307

5340-66-103-0022

5340-66-143-7884
Bracket

661437884
DSA-7-847-31: RNCC: 3 | RNVC: 2

7 Aug 1997

5340-66-155-6327
Access Cover

661556327
471-30205-402: RNCC: 3 | RNVC: 2
507977: RNCC: 5 | RNVC: 2

30 Apr 2007

5340-66-132-0941
Strap Assembly

661320941
OM2-142409: RNCC: 3 | RNVC: 2
OM0-142377-1: RNCC: 5 | RNVC: 9

22 Mar 1989

5340-66-155-4224
Mounting Actuator Plate

661554224
211472-07015: RNCC: 3 | RNVC: 2
211311-07015: RNCC: 5 | RNVC: 2

26 Mar 2007

5340-66-106-8484
Access Cover

661068484
30249: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-66-153-4212
Mounting Bracket

661534212
2431014: RNCC: 3 | RNVC: 2
2431014: RNCC: 5 | RNVC: 2

15 Aug 2005

5340-66-125-2426
Clamp

661252426
DE580160185: RNCC: 3 | RNVC: 2

11 Dec 1985

5340-66-146-5739
Tempo Hull Fitting

661465739
UVS-SMB-2M: RNCC: 3 | RNVC: 2

24 Jul 2000

5340-66-100-5229
Retaining Strap

661005229
ADE(A)264-26: RNCC: 3 | RNVC: 2

8 Jul 1979

5340-66-144-8021
Block Clamp

661448021
35-30005-4: RNCC: 3 | RNVC: 2

2 Mar 1999

5340-66-146-2029
Mechanical Stop

661462029
472 8366-01: RNCC: 3 | RNVC: 2

11 Feb 2000

5340-66-158-8406
Mounting Bracket

661588406
BMA-A26-0130-01: RNCC: 3 | RNVC: 2
BMA-A26-0130: RNCC: 5 | RNVC: 2

23 Aug 2010

5340-66-143-3958
Rear Panel

661433958
492081-02: RNCC: 3 | RNVC: 2

23 Apr 1998

5340-66-155-4496
Rim Lock

661554496
198-54-41982: RNCC: 3 | RNVC: 2
198-54-41982: RNCC: 5 | RNVC: 2

28 Mar 2007

5340-66-032-0383
Bow Handle

660320383
ADE(W)67-713: RNCC: 3 | RNVC: 2

18 Apr 1969

5340-66-154-7634
Pad Eye

661547634
15005357: RNCC: 3 | RNVC: 2

30 Aug 2006

5340-66-125-3297
General Purpose Access Door

661253297
DE580160590: RNCC: 3 | RNVC: 2

26 Feb 1986

5340-66-010-9382
Rod End Clevis

660109382
TSE(V)54-44: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-157-4273
Runner

661574273
468-01-0206A1: RNCC: 3 | RNVC: 2

18 Nov 2008

5340-66-028-1873
Retaining Bail

660281873
C81039: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-153-4091
Mounting Plate

661534091
15012707-02: RNCC: 3 | RNVC: 2

12 Aug 2005

5340-66-141-0328
Nonmetallic Bumper

661410328
471-50812-104: RNCC: 3 | RNVC: 2
1475630: RNCC: 5 | RNVC: 2

18 Aug 1995

5340-66-146-0929
Washing Inner Drum

661460929
471 4447-01: RNCC: 3 | RNVC: 2

18 Jan 2000

5340-66-145-9501
Mounting Plate

661459501
F/2888-570-012C: RNCC: 3 | RNVC: 2
Q EDE F/2888-570-012C: RNCC: 5 | RNVC: 2

16 Oct 2001

5340-66-158-0242
Door Button

661580242
7FA1010A29G05: RNCC: 3 | RNVC: 2

23 Jun 2009

5340-66-161-1793
Double Angle Bracket

661611793
MH-A185-0313-A2: RNCC: 3 | RNVC: 2

15 Jul 2013

5340-66-153-8758
Hangar Pole Extensi

661538758
T/BK/CE/750M: RNCC: 3 | RNVC: 2
T/BK/CE/750M: RNCC: 5 | RNVC: 2

22 Nov 2005

5340-66-147-8520
Bracket

661478520
F/2888-550-051A: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-051A: RNCC: 5 | RNVC: 2

24 Sep 2001

5340-66-128-6630
Spacing Threaded Standoff

661286630
999/4/35693/305: RNCC: 3 | RNVC: 2

25 Jun 1993

5340-66-155-7628
Mounting Plate

661557628
P10043-11: RNCC: 3 | RNVC: 2

23 May 2007

5340-66-122-9829
Adaptor Block

661229829
DE230010488: RNCC: 3 | RNVC: 2

30 Jun 1985

5340-66-158-0544
General Purpose Access Door

661580544
7FJ3060A59G05: RNCC: 3 | RNVC: 2

15 Jul 2009

5340-66-154-6242
Mounting Bracket

661546242
DE590510000: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-66-158-6252
Mounting Bracket

661586252
SC05200SS: RNCC: 3 | RNVC: 2
SC05200SS-100: RNCC: 3 | RNVC: 2

22 Apr 2010

5340-66-138-1858
Quick Release Plunger

661381858
6400181-154: RNCC: 3 | RNVC: 2

3 Oct 2001

5340-66-160-2179
Mounting Bracket

661602179
BMA-A05-1467-01: RNCC: 3 | RNVC: 2

1 May 2012

5340-66-145-4517
Uut Retainers

661454517
608/2/57790/000: RNCC: 3 | RNVC: 2

20 Sep 1999

5340-66-147-2315
Reducing Bush

661472315
001/501/GMOWS.3030.2.02: RNCC: 3 | RNVC: 2

29 Nov 2000

5340-66-161-1803
Mounting Bracket

661611803
15015939-G: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-66-143-1449
Webbing Strap

661431449
DE580676346/2: RNCC: 3 | RNVC: 2

28 Jan 1998

5340-66-120-3945
Webbing Strap

661203945
DE580180876-1: RNCC: 3 | RNVC: 2
DE580180876-1: RNCC: 5 | RNVC: 2

28 Apr 1984

5340-66-130-7799
Double Angle Bracket

661307799
A200854 SUPPORT: RNCC: 3 | RNVC: 2

9 Jul 1988

5340-66-126-2347
Clamp Cover

661262347
6R3-42851-00: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-66-140-3441
General Purpose Resilient Mount

661403441
GB530-NR 1.5: RNCC: 3 | RNVC: 2
WD2523/13: RNCC: 3 | RNVC: 2

2 Mar 1995

5340-66-147-3773
Mounting Bracket

661473773
0030300062: RNCC: 3 | RNVC: 2

11 Apr 2001

5340-66-153-2922
Butt Hinge Leaf

661532922
DE 100450030: RNCC: 3 | RNVC: 2

6 Jul 2005

5340-66-117-5572
Access Cover

661175572
EX20041008: RNCC: 3 | RNVC: 2

23 Jun 1983

5340-66-153-2642
Mounting Bracket

661532642
A210 0301: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-138-9689
Mounting Bracket

661389689
X50MD368A: RNCC: 3 | RNVC: 2
0050-00-005-0368: RNCC: C | RNVC: 1

6 Dec 1993

5340-66-139-1995
Mounting Bracket

661391995
HYG2726: RNCC: 3 | RNVC: 2
0068-00-000-2726: RNCC: C | RNVC: 1

10 Jun 1994

5340-66-151-9268
Permanent Magnet

661519268
NO PRIMARY REF 66-151-9268: RNCC: 3 | RNVC: 2
1326546: RNCC: 5 | RNVC: 2

6 Mar 2004

5340-66-136-3224
General Purpose Resilient Mount

661363224
R-4: RNCC: 3 | RNVC: 2

4 Sep 1992

5340-66-132-0780
Piano Hinge

661320780
A012791 SHEET 9: RNCC: 3 | RNVC: 2

20 Mar 1989

5340-66-153-9927
Dust And Moisture Seal Protective Cover

661539927
90-3: RNCC: 3 | RNVC: 2
BMA-V05-0022: RNCC: 5 | RNVC: 2
BMA-V05-0022-01: RNCC: 5 | RNVC: 2

13 Jan 2006

5340-66-150-0261
Swivel Caster

661500261
NO PRIMARY REF 66-150-0261: RNCC: 3 | RNVC: 2
04221753: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-019-0634
Lock-Release Lever

660190634
ADE(V)225-583: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-118-3667
Headless Straight Rod

661183667
TR2589-32-3A: RNCC: 3 | RNVC: 2

6 Mar 1984

5340-66-150-0259
Swivel Caster

661500259
NO PRIMARY REF 66-150-0259: RNCC: 3 | RNVC: 2
01064377: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-102-0876
Angle Bracket

661020876
H3263701: RNCC: 3 | RNVC: 2

8 Jul 1979

5340-66-108-4287
Bumper

661084287
B183: RNCC: 3 | RNVC: 2

6 Mar 1981

5340-66-146-5433
Base Cold Plate

661465433
CX25-1M4-1: RNCC: 3 | RNVC: 2

7 Jul 2000

5340-66-145-9594
Connector

661459594
HL-10-8-NG: RNCC: 3 | RNVC: 2

25 Oct 2001

5340-66-160-4470
Leather Strap

661604470
FSL 25-280: RNCC: 3 | RNVC: 2

26 Jul 2012

5340-66-161-1733
Access Cover

661611733
15018241-G: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-66-158-2133

5340-66-131-7540
Threaded Rod End

661317540
FS3847.011/F-4: RNCC: 3 | RNVC: 2
944.61.12.514: RNCC: 5 | RNVC: 2

17 Mar 1989

Load More Results