What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is a Hasp Staple?

A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

Hardware, Commercial - Australia (AU)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Australia (AU) - NCB is 66

Page 21 of 29

NSN Format for Hardware, Commercial
Codified by Australia

53	40	66	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Australia (AU)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 53 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 78 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 109 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 25 Items
Holder,Spring 26 Items
What is a Compression Cup? 11 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 43 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 85 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 54 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 27 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 249 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 36 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 87 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 39 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 11 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 16 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 15 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Rim Latch? 18 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Rim Lock? 13 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 12 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 17 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 17 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 18 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 103 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 11 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 59 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 14 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 14 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Plug Button? 12 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Corrosion Preventive Anode? 27 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 78 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 268 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 88 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 70 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 36 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 40 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 41 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Plain Solid Disk? 41 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 12 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 608 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 57 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 54 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 317 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 48 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 40 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 83 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Quick Release Plunger? 17 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 65 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 24 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 14 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 22 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 49 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 19 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 151 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 15 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 444 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 128 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 42 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 53 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 25 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 201 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 33 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 133 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 42 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 54 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Strapping? 28 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 75 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Screw Thread Insert And Tool Assortment? 18 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 28 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 18 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 740 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 11 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 14 Items
What is an Antipilferage Seal? 27 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 129 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Seal Retaining Plate? 29 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 47 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1862 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 15 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 11 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 10 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 766 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 27 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 65 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 79 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 71 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 22 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 12 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 14 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 35 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 50 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 28 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 15 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 20 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 11 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 83 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 138 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 393 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 38 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 11 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 22 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
What is a Key Blank? 22 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 10 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 114 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 11 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 20 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 12 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is a Bumper? 74 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 21 of 29

5340-66-019-5641
Expansion Plug

660195641
TYPE A: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-033-1800
Webbing Strap

660331800
DC3041-1: RNCC: 3 | RNVC: 2

11 Aug 1969

5340-66-091-9296
S Threaded Standoff

5340-66-160-7245
Mounting Bracket

661607245
S531A2044143: RNCC: 3 | RNVC: 2

13 Nov 2012

5340-66-148-8474
Butt Hinge

661488474
BUTT HINGE SZ 2 304SS: RNCC: 3 | RNVC: 2

23 Oct 2002

5340-66-085-5026
Locating Pin

660855026
19-4493-26: RNCC: 3 | RNVC: 2

8 Jan 1976

5340-66-129-8890
Dust And Moisture Seal Boot

661298890
016AMR392-4: RNCC: 3 | RNVC: 2

4 Apr 2001

5340-66-151-2377
Life Raft Han Cover

661512377
AL02038-1: RNCC: 3 | RNVC: 2

31 Mar 2004

5340-66-158-2601
Mounting Plate

661582601
274-505-005: RNCC: 3 | RNVC: 2

15 Oct 2009

5340-66-066-8967
Fusible Plug

660668967
C100190: RNCC: 3 | RNVC: 2

12 Feb 1974

5340-66-028-8902
Nonmetallic Bumper

660288902
HCF2516: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-112-7617
Mounting Plate

661127617
576.10.09.124: RNCC: 3 | RNVC: 2

14 Mar 1995

5340-66-143-6425
T Bracket

661436425
VI(01)(STBD FWD): RNCC: 3 | RNVC: 2

7 Oct 1997

5340-66-099-8375

5340-66-031-4641
Helical Compression Spring Retainer

660314641
FPAP29: RNCC: 3 | RNVC: 2

9 May 1969

5340-66-094-0046
Handwheel

660940046
19-015E2-8813: RNCC: 3 | RNVC: 2

17 Apr 1977

5340-66-010-9395
Rod End Connector

660109395
TSE(V)54-75: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-153-4217
Retaining Strap

661534217
AL05052-5: RNCC: 3 | RNVC: 2

15 Aug 2005

5340-66-149-0920
Mounting Bracket

661490920
675A00016-001-01: RNCC: 3 | RNVC: 2

18 Nov 2002

5340-66-155-8541
Lock Plate

661558541
471-50831-112: RNCC: 3 | RNVC: 2
510236: RNCC: 5 | RNVC: 2

18 Jun 2007

5340-66-155-4965
Detent

661554965
196630-02650: RNCC: 3 | RNVC: 2

2 Apr 2007

5340-66-161-1701
Mounting Bracket

661611701
15013617: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-66-155-4099
Ring

661554099
04064-07025: RNCC: 3 | RNVC: 2
04064-07025: RNCC: 5 | RNVC: 2

23 Mar 2007

5340-66-154-9621
Mounting Bracket

661549621
ARLM0785-1: RNCC: 3 | RNVC: 2

24 Oct 2006

5340-66-032-1936
Dust And Moisture Seal Protective Plug

660321936
4-26: RNCC: 3 | RNVC: 2

18 Apr 1969

5340-66-154-8037
Bumper

661548037
471-60801-113: RNCC: 3 | RNVC: 2
506683: RNCC: 5 | RNVC: 2

7 Sep 2006

5340-66-154-6815
Access Cover

661546815
VTR251-2TSUB14F4T19-7IIINM40W3P-: RNCC: 3 | RNVC: 1

11 Aug 2006

5340-66-011-6393
Barrel Bolt

660116393
3350: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-158-5734
Access Cover

661585734
P10104-18: RNCC: 3 | RNVC: 2

29 Mar 2010

5340-66-087-9146
Tee Hinge

660879146
HINGETEE: RNCC: 3 | RNVC: 1

22 May 1971

5340-66-139-3471
Access Cover

661393471
5143: RNCC: 3 | RNVC: 2

6 Sep 1994

5340-66-160-4815
Dust And Moisture Seal Boot

661604815
RP945: RNCC: 3 | RNVC: 2

16 Aug 2012

5340-66-156-3885
Access Cover

661563885
15013107: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-66-148-7695
Window Retaining Plate

661487695
62948: RNCC: 3 | RNVC: 2

25 Jul 2002

5340-66-143-4434
Mounting Plate

661434434
429367-01: RNCC: 3 | RNVC: 2

6 May 1998

5340-66-144-7300
Mounting Bracket

661447300
MHC1325-1: RNCC: 3 | RNVC: 2

21 Jan 1999

5340-66-158-6111
Mounting Bracket

661586111
MP08022001-1: RNCC: 3 | RNVC: 2

16 Apr 2010

5340-66-158-6860
Loop Clamp

661586860
RAY300011-1: RNCC: 3 | RNVC: 2
RAY300011-1: RNCC: 5 | RNVC: 2

4 Jun 2010

5340-66-154-5384
Dust And Moisture Seal Protective Cap

661545384
02000-A-1635: RNCC: 3 | RNVC: 2
WTL1635: RNCC: 5 | RNVC: 2

29 Jun 2006

5340-66-158-3038
Electronic Equipment Hardware Kit

661583038
FA266-0: RNCC: 3 | RNVC: 2

4 Nov 2009

5340-66-152-4201
Mounting Bracket

661524201
DF26-144-1: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-66-155-1725
Mounting Bracket

661551725
LM15: RNCC: 3 | RNVC: 2

20 Dec 2006

5340-66-160-0014
Mounting Bracket

661600014
MH-A612-0012-A2: RNCC: 3 | RNVC: 2

20 Mar 2012

5340-66-150-2461
Hasp Staple

661502461
NO PRIMARY REF 66-150-2461: RNCC: 3 | RNVC: 2
04281702: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-087-2207
Angle Bracket

660872207
58A12B57: RNCC: 3 | RNVC: 2

7 Mar 1975

5340-66-146-1779
Spring Holder

661461779
H70914-3-1: RNCC: 3 | RNVC: 2

11 Feb 2000

5340-66-150-8378
Rim Lock Set

661508378
C41-H81-003-001: RNCC: 3 | RNVC: 2

23 Sep 2003

5340-66-147-6360
Key Switch An Panel

661476360
A55-997-B2001-0A00: RNCC: 3 | RNVC: 2

15 Oct 2001

5340-66-154-8396
Snap Hook

661548396
08-0050008: RNCC: 3 | RNVC: 2

14 Sep 2006

5340-66-156-2839
Access Cover

661562839
471-41498-102: RNCC: 3 | RNVC: 2
508054: RNCC: 5 | RNVC: 2

22 Oct 2007

5340-66-156-0065
Access Cover

661560065
AG-A0605: RNCC: 3 | RNVC: 2

23 Jul 2007

5340-66-017-9367
Butt Hinge

660179367
WELD0M438: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-136-4590
Webbing Strap

661364590
DE580551022: RNCC: 3 | RNVC: 2

27 May 1993

5340-66-152-5011
General Purpose Access Door

661525011
12755575: RNCC: 3 | RNVC: 2

22 Feb 2005

5340-66-155-6394
Stop-Lug Lock

661556394
471-90429-113: RNCC: 3 | RNVC: 2
502034: RNCC: 5 | RNVC: 2

1 May 2007

5340-66-155-5107
Lever Arm

661555107
196630-03862: RNCC: 3 | RNVC: 2

4 Apr 2007

5340-66-144-7296
Mounting Actuator Plate

661447296
MHC1324-1: RNCC: 3 | RNVC: 2

18 Jan 1999

5340-66-144-5396
I.V.Slide

661445396
10616875: RNCC: 1 | RNVC: 2
RF371: RNCC: 3 | RNVC: 2
7613: RNCC: 5 | RNVC: 2

1 Dec 1998

5340-66-131-4496
Strap Assembly

661314496
DE580170676-2: RNCC: 3 | RNVC: 2

28 Oct 1988

5340-66-147-3091
General Purpose Access Door

661473091
D-0517: RNCC: 3 | RNVC: 2

28 Feb 2001

5340-66-148-3381
Mounting Plate

661483381
DE(INT)366-1: RNCC: 3 | RNVC: 2

23 Jul 2002

5340-66-154-8147
Runner

661548147
471-50807-231: RNCC: 3 | RNVC: 2
516937: RNCC: 5 | RNVC: 2

11 Sep 2006

5340-66-152-5058
Rod End Clevis

661525058
DE25180005: RNCC: 3 | RNVC: 2

2 Mar 2005

5340-66-155-1361
Access Cover

661551361
182626: RNCC: 3 | RNVC: 2

12 Dec 2006

5340-66-128-6356
Butt Hinge

661286356
HYG4565: RNCC: 3 | RNVC: 2

11 Mar 1992

5340-66-146-7001
Spring Tension Clip

661467001
103456: RNCC: 3 | RNVC: 2

16 Aug 2000

5340-66-147-8714
Mounting Bracket

661478714
F/2888-550-051B: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-051B: RNCC: 5 | RNVC: 2

20 Nov 2001

5340-66-147-4179
Mounting Bracket

661474179
CX25-1-M40-0: RNCC: 3 | RNVC: 2

7 May 2001

5340-66-153-4155
Mounting Plate

661534155
15012808-01: RNCC: 3 | RNVC: 2

15 Aug 2005

5340-66-140-3676
Helical Compression Spring Retainer

661403676
3A83-T0-138: RNCC: 3 | RNVC: 2

14 Mar 1995

5340-66-157-5730
Retaining Strap

661575730
10000129-16: RNCC: 3 | RNVC: 2

24 Dec 2008

5340-66-146-5547
Mounting Bracket

661465547
MB E052 6200: RNCC: 3 | RNVC: 2

15 Jun 2000

5340-66-153-6753
Handles Bag

661536753
9125D07049001: RNCC: 3 | RNVC: 2

11 Oct 2005

5340-66-158-8589
Angle Bracket

661588589
DE253600013: RNCC: 3 | RNVC: 2

8 Sep 2010

5340-66-024-0121
Angle Bracket

660240121
ADE(W)28-58: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-160-3422
Access Cover

661603422
00-200479: RNCC: 3 | RNVC: 2
00-200479: RNCC: 5 | RNVC: 2

20 Jun 2012

5340-66-157-2968
Access Cover

661572968
10053156: RNCC: 3 | RNVC: 2

1 Oct 2008

5340-66-155-2781
Metal Grille

661552781
MR-0006: RNCC: 3 | RNVC: 2

12 Feb 2007

5340-66-157-3362
Retaining Strap

661573362
1000155: RNCC: 3 | RNVC: 2
1000155: RNCC: 5 | RNVC: 2

13 Oct 2008

5340-66-152-0206
Mounting Plate

661520206
BMA-A05-0923-01: RNCC: 3 | RNVC: 2

14 Sep 2004

5340-66-147-7784
Adapter Seal

661477784
50290: RNCC: 3 | RNVC: 2

11 Oct 2001

5340-66-143-3968
Plug

661433968
492143: RNCC: 3 | RNVC: 2

23 Apr 1998

5340-66-130-7285
Angle Bracket

661307285
016AMR266: RNCC: 3 | RNVC: 2

28 Apr 1988

5340-66-143-3954
Drip Tray

661433954
492053: RNCC: 3 | RNVC: 2

23 Apr 1998

5340-66-147-8444
Shock Mount Pad

661478444
NALM00068-1: RNCC: 3 | RNVC: 2
NALM00068-1: RNCC: 5 | RNVC: 1

11 Mar 2002

5340-66-155-5200
Access Cover

661555200
471-41217-200: RNCC: 3 | RNVC: 2
513198: RNCC: 5 | RNVC: 2

5 Apr 2007

5340-66-122-6327
R Rubber Insulator

661226327
25160827: RNCC: 3 | RNVC: 2
25160827: RNCC: 3 | RNVC: 2

11 Oct 1984

5340-66-053-3824
Plain Solid Disk

660533824
90601: RNCC: 3 | RNVC: 2

3 Jul 1972

5340-66-156-3313
Access Cover

661563313
15015645: RNCC: 3 | RNVC: 2

31 Oct 2007

5340-66-159-5616
Retaining Strap

661595616
825982: RNCC: 3 | RNVC: 2
825982: RNCC: 5 | RNVC: 2

22 Sep 2011

5340-66-148-4108
Spacer Ring Assembl

661484108
H73925-01-1: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-66-128-7285
Multiple Angle Bracket

661287285
HYG5740: RNCC: 3 | RNVC: 2
0068-00-000-5740: RNCC: C | RNVC: 1
2520-97-121-3208: RNCC: C | RNVC: 1

13 Oct 1993

5340-66-143-0532
Mounting Bracket

661430532
DSA-23-681-2: RNCC: 3 | RNVC: 2

20 Mar 1997

5340-66-161-3483
Mounting Plate

661613483
AVI-100-014-006: RNCC: 3 | RNVC: 2

17 Sep 2013

5340-66-130-9528
Dust And Moisture Seal Protective Plug

661309528
410K: RNCC: 3 | RNVC: 2

1 Oct 1988

5340-66-144-7205
Handwheel

661447205
1174 97 013E/314: RNCC: 3 | RNVC: 2

18 Dec 1998

5340-66-158-2403
Mounting Plate

661582403
BMU-A18-3025-01: RNCC: 3 | RNVC: 2
BMU-A18-3025: RNCC: 5 | RNVC: 2

8 Oct 2009

5340-66-147-7632
Access Cover

661477632
6671391-9: RNCC: 3 | RNVC: 2
6671391-9: RNCC: C | RNVC: 1

15 Aug 2001

5340-66-158-6804
Mounting Bracket

661586804
RAY184030-1: RNCC: 3 | RNVC: 2
RAY184030-1: RNCC: 5 | RNVC: 2

3 Jun 2010

5340-66-150-2025
Support Hook

661502025
NO PRIMARY REF 66-150-2025: RNCC: 3 | RNVC: 2
01566310: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-154-8096
Metal Grille

661548096
021-03817-001: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-66-128-8734
Link

661288734
48802-60010: RNCC: 3 | RNVC: 2
2530-97-151-3262: RNCC: C | RNVC: 1

27 Oct 1993

5340-66-155-4093
Retaining Clip

661554093
07285-00080: RNCC: 3 | RNVC: 2
07285-00080: RNCC: 5 | RNVC: 2

23 Mar 2007

5340-66-142-4640
Mounting Bracket

661424640
471-44468-531T02: RNCC: 3 | RNVC: 2
514595: RNCC: 3 | RNVC: 2

20 Aug 1996

5340-66-158-7685
Mounting Plate

661587685
BMA-A05-1695-01: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-66-158-0075
Bumper

661580075
JMS2015-12: RNCC: 3 | RNVC: 2

17 Jun 2009

5340-66-146-5057
Turnbuckle

661465057
RF1576-12: RNCC: 3 | RNVC: 2

8 Jun 2000

5340-66-146-1056
Rail Support

661461056
471 7958-01: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-66-120-6741
Fwd. Hinge Half

661206741
12S1796-11-112: RNCC: 3 | RNVC: 2

13 Oct 1986

5340-66-146-3909
Bracket

661463909
73215-3-16: RNCC: 3 | RNVC: 2

3 May 2000

5340-66-145-4844
Block Clamp

661454844
622 PAR DP-AS: RNCC: 3 | RNVC: 2
622 PAR DP-AS: RNCC: 5 | RNVC: 2

5 Oct 1999

5340-66-158-9662
Mounting Bracket

661589662
RP247669: RNCC: 3 | RNVC: 2

10 Nov 2010

5340-66-138-6321
General Purpose Resilient Mount

661386321
V3CA8090-03LL: RNCC: 3 | RNVC: 2
V3CA-8090-03-LL: RNCC: 3 | RNVC: 2
92 OG 5179: RNCC: 5 | RNVC: 2

25 Feb 1994

5340-66-140-5419
Mounting Bracket

661405419
DE250530111: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-66-062-2249
Retaining Clip

660622249
DA75230018: RNCC: 3 | RNVC: 2

14 Sep 1973

5340-66-149-5666
Key Holder

661495666
NO PRIMARY REF 66-149-5666: RNCC: 3 | RNVC: 2
T980365: RNCC: 5 | RNVC: 2

7 Apr 2003

5340-66-150-0633
Padlock

661500633
NO PRIMARY REF 66-150-0633: RNCC: 3 | RNVC: 2
03381732: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-140-6921
Mounting Bracket

661406921
MODKIT7360661390641: RNCC: 3 | RNVC: 1
BV: RNCC: 5 | RNVC: 2

30 Aug 1995

5340-66-156-9936
Access Cover

661569936
KV10416: RNCC: 3 | RNVC: 2
KV10416: RNCC: 5 | RNVC: 2
KV10416: RNCC: 5 | RNVC: 2

1 Jul 2008

5340-66-158-4715
Blade Stop

661584715
SODFAB01/5: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-66-155-7527
Angle Bracket

661557527
X50RC528M: RNCC: 3 | RNVC: 2

21 May 2007

5340-66-117-7130
Pipe Hanger

661177130
PS107/116: RNCC: 3 | RNVC: 2

28 Jun 1983

5340-66-130-1233
Retaining Clip

661301233
156 113 1843 0: RNCC: 3 | RNVC: 2
159 113 1843 0: RNCC: 5 | RNVC: 2

11 Sep 1987

5340-66-143-6427
T Bracket

661436427
VI(01)(STBD AFT): RNCC: 3 | RNVC: 2

7 Oct 1997

5340-66-157-5245
Mounting Bracket

661575245
V02-10-01-01-01: RNCC: 3 | RNVC: 2

9 Dec 2008

5340-66-146-6111
Mounting Plate

661466111
A55-997-B2113-0A00: RNCC: 3 | RNVC: 2

7 Jun 2000

5340-66-146-1980
Mounting Bracket

661461980
472 8016-01: RNCC: 3 | RNVC: 2

10 Feb 2000

5340-66-157-4641
Block Clamp

661574641
V05-02-07-03-01: RNCC: 3 | RNVC: 2

26 Nov 2008

5340-66-128-0642
Mounting Bracket

661280642
112.35.07.457: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-66-019-6721
Compression Cup

660196721
Q59: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-132-0867
Mounting Bracket

661320867
GH1018/11: RNCC: 3 | RNVC: 2

19 Apr 1989

5340-66-143-0263
Extension Drawer Slide

661430263
19-02528: RNCC: 3 | RNVC: 2

29 Apr 1997

5340-66-151-8068
Butt Hinge

661518068
DE251600017: RNCC: 3 | RNVC: 2
DE251600017: RNCC: 3 | RNVC: 2

30 Apr 2004

5340-66-087-1603
Angle Bracket

660871603
4821014-1: RNCC: 3 | RNVC: 2

17 Feb 1975

5340-66-157-8157
Spring Tension Clip

661578157
TL80701//NX1: RNCC: 3 | RNVC: 2

3 Apr 2009

5340-66-155-5800
Mounting Bracket

661555800
X50MF328C: RNCC: 3 | RNVC: 2

19 Apr 2007

5340-66-152-5799
Mounting Bracket

661525799
X50QS4152B: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-66-060-9588
Loop Clamp

660609588
510: RNCC: 3 | RNVC: 2

12 Aug 1973

5340-66-151-1851
Angle Bracket

661511851
ARLM0433-1: RNCC: 3 | RNVC: 2

26 Feb 2004

5340-66-015-3548
Webbing Strap

660153548
ADE(V)8-3: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-092-2739
Blank Panel

660922739
SYD29199-2: RNCC: 3 | RNVC: 2

23 Aug 1976

5340-66-090-1162
Double Angle Bracket

660901162
MF001-1: RNCC: 3 | RNVC: 2

9 Sep 1975

5340-66-142-6269
Angle Bracket

661426269
44-79-22201-109: RNCC: 3 | RNVC: 2

21 Jan 1997

5340-66-154-9626
Flush Catch Claw

661549626
ARLM0796-1: RNCC: 3 | RNVC: 2

24 Oct 2006

5340-66-147-7367
Mounting Plate

661477367
BT-0415X033-D: RNCC: 3 | RNVC: 2

31 Jul 2001

5340-66-027-3190
Recess Handle

660273190
610: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-134-2795
Loop Clamp

661342795
6.017.3007: RNCC: 3 | RNVC: 2

30 Jul 1991

5340-66-139-0941
Cover

661390941
YA4356160136: RNCC: 3 | RNVC: 2
YA4356160136: RNCC: 5 | RNVC: 2

2 Mar 1994

5340-66-143-3616
Spindle

661433616
142217: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-66-132-1618
Access Cover

661321618
K504173AX: RNCC: 3 | RNVC: 2

13 Jun 1989

5340-66-144-5486
Dust And Moisture Seal Protective Cap

661445486
10617666: RNCC: 1 | RNVC: 2
CIG 517833: RNCC: 3 | RNVC: 2
CIG 517833: RNCC: 5 | RNVC: 2

4 Dec 1998

5340-66-156-0700
Helical Compression Spring Retainer

661560700
AG-Z080E: RNCC: 3 | RNVC: 2

16 Aug 2007

5340-66-123-2378
Tailgate Hinge

661232378
FADDTAA5642A2RH: RNCC: 3 | RNVC: 2
AA564-2A-2RH: RNCC: 3 | RNVC: 2

29 Oct 1985

5340-66-149-5698
Monitor Riser

661495698
NO PRIMARY REF 66-149-5698: RNCC: 3 | RNVC: 2
91717: RNCC: 5 | RNVC: 2

7 Apr 2003

5340-66-147-7829
Oil Cooler Brace

661477829
F/2888-560-007A: RNCC: 3 | RNVC: 2
Q EDE F/2888-560-007A: RNCC: 5 | RNVC: 2

18 Sep 2001

5340-66-156-7507
Access Cover

661567507
JDA-A16-2008-01: RNCC: 3 | RNVC: 2

18 Mar 2008

5340-66-159-1071
Access Cover

661591071
GAG1140-32: RNCC: 3 | RNVC: 2

21 Feb 2011

5340-66-157-8707
Angle Bracket

661578707
BMA-A19-0168-01: RNCC: 3 | RNVC: 2

28 Apr 2009

5340-66-145-2470
Mounting Bracket

661452470
MH-A612-0004-A1: RNCC: 3 | RNVC: 2

26 Aug 1999

5340-66-157-5858
Block Clamp

661575858
C05268: RNCC: 3 | RNVC: 2

15 Jan 2009

5340-66-161-2662
Bumper

661612662
1600-03-0107C4-02: RNCC: 3 | RNVC: 2
QVRL1600030107C402: RNCC: 5 | RNVC: 2

12 Aug 2013

5340-66-158-5172
Antipilferage Seal

661585172
BR07712: RNCC: 3 | RNVC: 2

3 Mar 2010

5340-66-141-2129
Padlock Eye

661412129
88.8281.5340: RNCC: 3 | RNVC: 2

25 Oct 1995

5340-66-054-1197
Loop Clamp

660541197
H904: RNCC: 3 | RNVC: 2
136343H: RNCC: 5 | RNVC: 2

27 Aug 1972

5340-66-155-4840
Helical Compression Spring Seat

661554840
120270-66600: RNCC: 3 | RNVC: 2

30 Mar 2007

5340-66-158-8402
Double Angle Bracket

661588402
BMA-A26-0134-01: RNCC: 3 | RNVC: 2
BMA-A26-0134: RNCC: 5 | RNVC: 2

23 Aug 2010

5340-66-147-7690
Particle Filter

661477690
33-0145: RNCC: 3 | RNVC: 2

4 Sep 2001

5340-66-160-7130
Mounting Bracket

661607130
8HR-161692: RNCC: 3 | RNVC: 2
H28P0009A: RNCC: 5 | RNVC: 2

5 Nov 2012

5340-66-145-0028
Block Clamp

661450028
MH-A612-0009-A1: RNCC: 3 | RNVC: 2

28 Jun 1999

5340-66-138-7211
Locking Stay

661387211
SZ 2519: RNCC: 3 | RNVC: 2
B831F420/44: RNCC: 5 | RNVC: 2

29 Mar 1994

5340-66-157-4632
Lock Key

661574632
E3-8-1: RNCC: 3 | RNVC: 2

26 Nov 2008

5340-66-114-7181
Mounting Bracket

661147181
DA78468003: RNCC: 3 | RNVC: 2

27 Oct 1983

5340-66-028-0448
Mounting Clamp

660280448
233867: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-120-6302
Pcb Bracket

661206302
950-590: RNCC: 3 | RNVC: 2

18 Aug 1984

5340-66-154-8460
Mounting Bracket

661548460
15006153: RNCC: 3 | RNVC: 2

18 Sep 2006

5340-66-041-1313
Clamp Assembly

660411313
902-475-2: RNCC: 3 | RNVC: 2

21 May 1971

5340-66-154-8796
General Purpose Access Door

661548796
2200-2110-00-11: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-66-105-4731
Mounting Bracket

661054731
450400001-01: RNCC: 3 | RNVC: 2

18 Oct 1989

5340-66-160-1626
Loop Clamp

661601626
0941 0015 009: RNCC: 3 | RNVC: 2
RSGU1-9/15-W1: RNCC: 3 | RNVC: 2
121042: RNCC: 5 | RNVC: 2

20 Apr 2012

5340-66-156-9378
Rod End Clevis

661569378
828456: RNCC: 3 | RNVC: 2

11 Jun 2008

5340-66-155-8872
Manual Control Lever

661558872
471-50809-115: RNCC: 3 | RNVC: 2
502549: RNCC: 5 | RNVC: 2

25 Jun 2007

5340-66-154-5602
Door Lock Kits

661545602
935232: RNCC: 3 | RNVC: 2
04R-935232: RNCC: 5 | RNVC: 2

6 Jul 2006

5340-66-150-4056
Clamping Catch

661504056
NO PRIMARY REF 66-150-4056: RNCC: 3 | RNVC: 2
00761821: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-153-6669
Webbing Strap

661536669
9125D05044001-001: RNCC: 3 | RNVC: 2

11 Oct 2005

5340-66-157-5164
Mounting Bracket

661575164
V0507-CE-1500: RNCC: 3 | RNVC: 2

8 Dec 2008

5340-66-158-3928
Angle Bracket

661583928
20515580-100: RNCC: 3 | RNVC: 2

10 Dec 2009

5340-66-147-8570
Support Bracket

661478570
F/2888-575-003A: RNCC: 3 | RNVC: 2
Q EDE F/2888-575-003A: RNCC: 5 | RNVC: 2

25 Sep 2001

5340-66-155-5188
Manual Control Handle

661555188
471-41243-914: RNCC: 3 | RNVC: 2
512586: RNCC: 5 | RNVC: 2

4 Apr 2007

5340-66-150-5766
General Purpose Resilient Mount

661505766
NO PRIMARY REF 66-150-5766: RNCC: 3 | RNVC: 2
08731902: RNCC: 5 | RNVC: 2

16 Apr 2003

5340-66-150-2870
Loop Clamp

661502870
NO PRIMARY REF 66-150-2870: RNCC: 3 | RNVC: 2
01236366: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-138-9397
Mounting Bracket

661389397
1240-97-211-6811: RNCC: 3 | RNVC: 2

4 Nov 1993

5340-66-141-7704
General Purpose Resilient Mount

661417704
H63-146-82-108-6FF: RNCC: 3 | RNVC: 2

19 Jan 1996

5340-66-026-2183
Nonmetallic Bumper

660262183
PB7M18198A: RNCC: 3 | RNVC: 2
PB 7M 18198: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-66-156-3104
Mounting Plate

661563104
15012688: RNCC: 3 | RNVC: 2

26 Oct 2007

5340-66-156-4202
Electronic Equipment Hardware Kit

661564202
SCES20016: RNCC: 3 | RNVC: 2

21 Nov 2007

5340-66-156-2958
Mounting Plate

661562958
15005262: RNCC: 3 | RNVC: 2

25 Oct 2007

5340-66-154-8566
Blank Panel

661548566
15010478-19: RNCC: 3 | RNVC: 2

20 Sep 2006

5340-66-146-3912
Lever Arm

661463912
73215-3-41: RNCC: 3 | RNVC: 2

27 Apr 2000

5340-66-127-3037
Spacer Block

661273037
503W98001-1: RNCC: 3 | RNVC: 2

2 Jul 1999

5340-66-139-9665
General Purpose Resilient Mount

661399665
03315 SH26: RNCC: 3 | RNVC: 1
03315 SH26: RNCC: 3 | RNVC: 1
100123/2P15/65SHORE/NR/ST37.2: RNCC: 3 | RNVC: 2
100123/2P15/65SHORE/NR/ST37-2: RNCC: 3 | RNVC: 2
332259808: RNCC: 3 | RNVC: 2

14 Oct 1994

5340-66-161-0544
Pipe Hanger

661610544
P471-90000-123T03: RNCC: 3 | RNVC: 2
471-90000-123T03: RNCC: 3 | RNVC: 2
1087952: RNCC: 5 | RNVC: 2

7 May 2013

5340-66-131-5117
Crank Handle

661315117
MC/0002: RNCC: 3 | RNVC: 2

16 Nov 1988

5340-66-157-7855
Dust And Moisture Seal Protective Plug Set

661577855
120348: RNCC: 3 | RNVC: 2

26 Mar 2009

5340-66-102-7833
Double Angle Bracket

661027833
N0D446G2114-006: RNCC: 3 | RNVC: 2

4 Nov 1979

5340-66-157-4558
Mounting Bracket

661574558
V04-01-02-01-00: RNCC: 3 | RNVC: 2

26 Nov 2008

5340-66-157-3811
Mounting Bracket

661573811
RM-A0100: RNCC: 3 | RNVC: 2

29 Oct 2008

5340-66-160-2831
Mounting Plate

661602831
BMA-A19-0189-01: RNCC: 3 | RNVC: 2

24 May 2012

5340-66-147-4625
Hydraulic Oil Kit

661474625
686/5/18543/000: RNCC: 3 | RNVC: 2

18 May 2001

5340-66-126-7232
Nut And Bolt Locking Plate

661267232
6127-11-5190: RNCC: 3 | RNVC: 2

8 May 1986

5340-66-154-3986
Intermediate Piece

661543986
3131+108: RNCC: 3 | RNVC: 2

15 May 2006

5340-66-155-5362
Catch Strike

661555362
471-30466-104: RNCC: 3 | RNVC: 2
501747: RNCC: 5 | RNVC: 2

12 Apr 2007

5340-66-036-2987
Pipe Hanger

660362987
352-14900: RNCC: 3 | RNVC: 2

29 Jun 1970

5340-66-155-9541
Retaining Strap

661559541
P471-90000-123T05: RNCC: 3 | RNVC: 2
1087976: RNCC: 5 | RNVC: 2

10 Jul 2007

5340-66-146-9100
Mounting Bracket

661469100
ZG-102: RNCC: 3 | RNVC: 2

4 Oct 2000

5340-66-150-2035
Support Hook

661502035
NO PRIMARY REF 66-150-2035: RNCC: 3 | RNVC: 2
06029218: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-052-5286
Idler Rolle Bracket

660525286
746-31: RNCC: 3 | RNVC: 2

28 Jul 1972

5340-66-160-9496
Mounting Bracket

661609496
BMD-A26-0036-01: RNCC: 3 | RNVC: 2

21 Mar 2013

5340-66-079-0153
Door Cupboard Lock

660790153
2000094659: RNCC: 3 | RNVC: 2

12 Oct 1974

5340-66-157-3367
Retaining Strap

661573367
1000159: RNCC: 3 | RNVC: 2
1000159: RNCC: 5 | RNVC: 2

13 Oct 2008

5340-66-160-3764
Latch Bar

661603764
BMU-A19-3004-01: RNCC: 3 | RNVC: 2

27 Jun 2012

5340-66-157-4402
Webbing Strap

661574402
468-A1-150: RNCC: 3 | RNVC: 2

24 Nov 2008

5340-66-154-7032
Mechanical Stop

661547032
471-51806-1: RNCC: 3 | RNVC: 2
504313: RNCC: 5 | RNVC: 2

16 Aug 2006

5340-66-157-1485
Mounting Bracket

661571485
BMA-A05-1085-01: RNCC: 3 | RNVC: 2

15 Aug 2008

5340-66-150-0763
Expansion Shield

661500763
NO PRIMARY REF 66-150-0763: RNCC: 3 | RNVC: 2
00721565: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-155-2301
General Purpose Resilient Mount

661552301
P471-90200-104T03: RNCC: 3 | RNVC: 2
1080374: RNCC: 5 | RNVC: 2

30 Jan 2007

5340-66-127-3997
Mechanical Stop

661273997
401AMR219-1: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-66-142-4639
Mounting Bracket

661424639
471-44468-531T01: RNCC: 3 | RNVC: 2
514594: RNCC: 3 | RNVC: 2

20 Aug 1996

5340-66-158-5654
Mounting Bracket

661585654
P10074-02-03: RNCC: 3 | RNVC: 2

25 Mar 2010

5340-66-154-2209
Helical Compression Spring Seat

661542209
S0006A1E1839/712: RNCC: 3 | RNVC: 2

27 Mar 2006

5340-66-150-1584
Dust And Moisture Seal Protective Cap

661501584
NO PRIMARY REF 66-150-1584: RNCC: 3 | RNVC: 2
04588311: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-159-2785
Access Cover

661592785
10002-05001: RNCC: 3 | RNVC: 2

17 May 2011

5340-66-060-9610
Swivel Caster

660609610
SWIVEL CASTOR: RNCC: 3 | RNVC: 1

12 Oct 1973

5340-66-156-3178
Mounting Bracket

661563178
15013559: RNCC: 3 | RNVC: 2

29 Oct 2007

5340-66-160-8632
Cover Strip

661608632
P10547-01-P-AA01: RNCC: 3 | RNVC: 2

13 Feb 2013

5340-66-148-5381
Mounting Bracket

661485381
3000-1308-00-47: RNCC: 3 | RNVC: 2

21 Jun 2002

5340-66-156-3326
Mounting Plate

661563326
BMA-A05-1746-01: RNCC: 3 | RNVC: 2

31 Oct 2007

5340-66-156-6227
Backing Plate

661566227
NALM00695-1: RNCC: 3 | RNVC: 2
NALM00695-1: RNCC: 5 | RNVC: 2

13 Feb 2008

5340-66-158-6803
Mounting Bracket

661586803
RAY184027-1: RNCC: 3 | RNVC: 2
RAY184027-1: RNCC: 5 | RNVC: 2

3 Jun 2010

5340-66-151-9269
Permanent Magnet

661519269
NO PRIMARY REF 66-151-9269: RNCC: 3 | RNVC: 2
1485474: RNCC: 5 | RNVC: 2

6 Mar 2004

5340-66-158-6756
Mounting Plate

661586756
RAY184001-1: RNCC: 3 | RNVC: 2
RAY184001-1: RNCC: 5 | RNVC: 2

1 Jun 2010

5340-66-139-1940
Mounting Bracket

661391940
MEA 1756-4: RNCC: 3 | RNVC: 2

10 May 1994

5340-66-078-4835
Inner Ring

660784835
N36299-3: RNCC: 3 | RNVC: 2

14 Aug 1974

5340-66-156-2522
Mounting Plate

661562522
A2100156-1: RNCC: 3 | RNVC: 2

4 Oct 2007

5340-66-155-1058
Angle Bracket

661551058
RAY171000-9: RNCC: 3 | RNVC: 2

5 Dec 2006

5340-66-132-0658
Blanking Panel Asse

661320658
A014497: RNCC: 3 | RNVC: 2

17 Mar 1989

5340-66-131-6864
Nonmetallic Bumper

661316864
3255762R91: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-66-147-2663
Middle Manifold

661472663
DLC75: RNCC: 3 | RNVC: 2

15 Dec 2000

5340-66-158-6780
Angle Bracket

661586780
RAY184022-7: RNCC: 3 | RNVC: 2
RAY184022-7: RNCC: 5 | RNVC: 2

1 Jun 2010

5340-66-021-4764
Catch Strike

660214764
ADE(M)76-9-1: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-158-6797
Mounting Bracket

661586797
RAY184016-1: RNCC: 3 | RNVC: 2

3 Jun 2010

5340-66-018-2130
Nonmetallic Bumper

660182130
ADE(V)225-73: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-154-9052
Mounting Bracket

661549052
BME-A05-0176-01: RNCC: 3 | RNVC: 2

4 Oct 2006

5340-66-159-2690
Mounting Plate

661592690
P10567-88: RNCC: 3 | RNVC: 2
P10567 ITEM 17: RNCC: 5 | RNVC: 2

10 May 2011

5340-66-155-8402
Mounting Bracket

661558402
471-40204-159: RNCC: 3 | RNVC: 2
514995: RNCC: 5 | RNVC: 2

14 Jun 2007

5340-66-152-7624
Special Washer

661527624
63.33.249: RNCC: 3 | RNVC: 2
SE63.33.249: RNCC: 5 | RNVC: 2

14 Mar 2005

5340-66-154-7653
Mounting Plate

661547653
15003978: RNCC: 3 | RNVC: 2

31 Aug 2006

5340-66-145-2757
Dirt And Liquid Deflector

661452757
00-202725: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-66-145-5807
Mounting Bracket

661455807
DE250980708: RNCC: 3 | RNVC: 2

7 Oct 1999

5340-66-158-4472
Butt Hinge Leaf

661584472
TF01657-1: RNCC: 3 | RNVC: 2

25 Jan 2010

5340-66-147-7647
Locking Ring Set

661477647
45098: RNCC: 3 | RNVC: 2

11 Oct 2001

5340-66-147-0711
Double Angle Bracket

661470711
DE620050015: RNCC: 3 | RNVC: 2

19 Dec 2000

5340-66-154-2306
Seal Retaining Plate

661542306
FD1366: RNCC: 3 | RNVC: 2
FD1366: RNCC: 5 | RNVC: 2

30 Mar 2006

5340-66-034-2335
Bow Handle

660342335
H500SMALL: RNCC: 3 | RNVC: 2

19 Dec 1969

5340-66-019-0931
Spring Tension Clip

660190931
ADE(V)50.35: RNCC: 3 | RNVC: 2
ADE(V)50-35: RNCC: 3 | RNVC: 2
ADE(V)50.35: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-66-144-5568
Winch Clutch Handle

661445568
0616: RNCC: 3 | RNVC: 2

10 Dec 1998

5340-66-154-6247
Electronic Equipment Hardware Kit

661546247
SCES13905: RNCC: 3 | RNVC: 2

28 Jul 2006

5340-66-043-1135
Angle Bracket

5340-66-044-7118
Butt Hinge

5340-66-048-5654

5340-66-045-2629
Loop Clamp

5340-66-043-1136
Angle Bracket

5340-66-044-0405
Helical Co Retainer

5340-66-153-4149
Screw Clamp

661534149
15013121: RNCC: 3 | RNVC: 2

15 Aug 2005

5340-66-156-4430
Webbing Strap

661564430
10006013-130: RNCC: 3 | RNVC: 2
10006013-130: RNCC: 3 | RNVC: 2
10006013-130: RNCC: 5 | RNVC: 2

27 Nov 2007

5340-66-156-5929
Mounting Plate

661565929
471-30204-100: RNCC: 3 | RNVC: 2
509099: RNCC: 5 | RNVC: 2

31 Jan 2008

5340-66-150-0659
Padlock

661500659
234B45/148/5KD: RNCC: 3 | RNVC: 2
03381035: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-156-9167
Mounting Bracket

661569167
BMA-A05-1664-01: RNCC: 3 | RNVC: 2

30 May 2008

5340-66-146-1133
Washer-Extractor

661461133
472 9902-11: RNCC: 3 | RNVC: 2

21 Jan 2000

5340-66-161-2643
Webbing Strap

661612643
1600-02-0103A4: RNCC: 3 | RNVC: 2
QVRL1600020103A4: RNCC: 5 | RNVC: 2

12 Aug 2013

5340-66-135-2780
General Purpose Resilient Mount

661352780
M17-1480-1MN40: RNCC: 3 | RNVC: 2
10400224: RNCC: 5 | RNVC: 2

10 Feb 1992

5340-66-159-7636
Mounting Bracket

661597636
MD2008N/40: RNCC: 3 | RNVC: 2

14 Feb 2012

5340-66-128-6225
Rim Latch

661286225
HYM1063: RNCC: 3 | RNVC: 2
MYH3503: RNCC: 3 | RNVC: 2
2467/001: RNCC: 5 | RNVC: 2

29 Oct 1991

5340-66-133-6587
Block Clamp

661336587
2471: RNCC: 3 | RNVC: 2
2471: RNCC: 5 | RNVC: 2

8 Feb 1990

5340-66-147-2660
Manifold

661472660
DLB80: RNCC: 3 | RNVC: 2

15 Dec 2000

5340-66-152-0290
Rifle Clip Assembly

661520290
BMA-A05-1591-01: RNCC: 3 | RNVC: 2

29 Sep 2004

5340-66-155-3923
Loop Clamp

661553923
6206-11-5911: RNCC: 3 | RNVC: 2
6206-11-5911: RNCC: 5 | RNVC: 2

20 Mar 2007

5340-66-129-9542
Retaining Clip

661299542
378942: RNCC: 3 | RNVC: 2

17 Jun 1987

5340-66-140-5445
Electronic Equipment Hardware Kit

661405445
MX-F225: RNCC: 3 | RNVC: 2
DE530020005: RNCC: 3 | RNVC: 2

8 Jun 1995

5340-66-017-9992
Butt Hinge

660179992
WELD0M438: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-158-1548
Mounting Plate

661581548
P10366-100-04: RNCC: 3 | RNVC: 2

7 Sep 2009

5340-66-027-0709
Angle Bracket

660270709
ADE(M)59-15: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-155-5972
Mounting Plate

661555972
111-260-120-414-000: RNCC: 3 | RNVC: 2

23 Apr 2007

5340-66-157-4244
Angle Bracket

661574244
468-01-0204C7-05: RNCC: 3 | RNVC: 2

18 Nov 2008

5340-66-156-5289
Access Cover

661565289
HLA-A19-2008-01: RNCC: 3 | RNVC: 2

18 Dec 2007

5340-66-160-3258
Mounting Bracket

661603258
BP5685390: RNCC: 3 | RNVC: 2

7 Jun 2012

5340-66-138-8176
Mounting Bracket

661388176
196630-06950: RNCC: 3 | RNVC: 2

21 Apr 1994

5340-66-155-8396
Runner

661558396
471-50809-146: RNCC: 3 | RNVC: 2
502580: RNCC: 5 | RNVC: 2

14 Jun 2007

5340-66-154-8146
Spring Loaded Cylinder Fastener

661548146
471-50813: RNCC: 3 | RNVC: 2
502687: RNCC: 5 | RNVC: 2

11 Sep 2006

5340-66-150-5144
Latch Bar

661505144
NO PRIMARY REF 66-150-5144: RNCC: 3 | RNVC: 2
04055608: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-154-5945
Square Driv Adapter

661545945
471-40206-112: RNCC: 3 | RNVC: 2
1619196: RNCC: 5 | RNVC: 2
524039: RNCC: 5 | RNVC: 2

19 Jul 2006

5340-66-148-4767
Adaptor

661484767
OED1667-2: RNCC: 3 | RNVC: 2

13 May 2002

5340-66-117-6677
Hinged Hasp

661176677
7009: RNCC: 3 | RNVC: 2

13 Jul 1983

5340-66-106-3064
General Purpose Resilient Mount

661063064
601905: RNCC: 3 | RNVC: 2
601905: RNCC: 5 | RNVC: 2

22 Jun 1980

5340-66-155-6068
Angle Bracket

661556068
471-90422-278: RNCC: 3 | RNVC: 2
518586: RNCC: 5 | RNVC: 2

24 Apr 2007

5340-66-158-7474
Mounting Plate

661587474
P10470-85: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-66-157-4529
Webbing Strap

661574529
468-A6-650: RNCC: 3 | RNVC: 2

25 Nov 2008

5340-66-160-2159
General Purpose Access Door

661602159
BMA-A05-197-002: RNCC: 3 | RNVC: 2

30 Apr 2012

5340-66-151-8364
Cushioning Pad

661518364
AC1010-S: RNCC: 3 | RNVC: 2

24 Dec 2003

5340-66-140-2825
Pad Eye

661402825
024AMR028-1: RNCC: 3 | RNVC: 2

7 Feb 1995

5340-66-085-8717
Hookbolt Stopper

660858717
16-6464: RNCC: 3 | RNVC: 2

8 Jan 1976

5340-66-119-9502
Access Cover

661199502
DA90093000: RNCC: 3 | RNVC: 1

12 Nov 1990

5340-66-018-5276
Dust And Moisture Seal Protective Cap

660185276
025-0489-000: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-157-6767
Frame Support Rod

661576767
D-2656: RNCC: 3 | RNVC: 2
13333: RNCC: 5 | RNVC: 2

9 Feb 2009

5340-66-118-3777
Webbing Strap

661183777
404-001-102: RNCC: 3 | RNVC: 2

3 Apr 1991

5340-66-123-2379
Tailgate Hinge

661232379
AA564-2A-5: RNCC: 3 | RNVC: 2
FADDTAA5642A5: RNCC: 3 | RNVC: 2

29 Oct 1985

5340-66-151-6962
Mounting Bracket

661516962
LTA-A09-009-001: RNCC: 3 | RNVC: 2

1 Sep 2003

5340-66-150-8088
Mounting Bracket

661508088
LTE-A05-0016-01: RNCC: 3 | RNVC: 2

17 Apr 2003

5340-66-151-5914
Double Angle Bracket

661515914
LTA-A07-0059-01: RNCC: 3 | RNVC: 2

15 Aug 2003

5340-66-147-9340
Rubber Seal

661479340
AC118PL-60: RNCC: 3 | RNVC: 2

14 Jan 2002

5340-66-149-8385
Coat And Hat Hook

661498385
NO PRIMARY REF 66-149-8385: RNCC: 3 | RNVC: 2
00553756: RNCC: 5 | RNVC: 2

9 Apr 2003

5340-66-145-7621
Access Cover

661457621
489 5100-13: RNCC: 3 | RNVC: 2

21 Oct 1999

5340-66-144-0021
Buckle

661440021
AB16593-1: RNCC: 3 | RNVC: 2

5 Dec 1997

5340-66-159-7697
Runner

661597697
TF01979-2: RNCC: 3 | RNVC: 2
TF01979-2: RNCC: 5 | RNVC: 2

16 Feb 2012

5340-66-111-4957
Box Beam Asse Hinge

661114957
20B481-1: RNCC: 3 | RNVC: 2

21 Jul 1981

5340-66-148-5536
Hydro Tap Extension

661485536
90506: RNCC: 3 | RNVC: 2

12 Jul 2002

5340-66-154-8622
Mounting Bracket

661548622
15010852: RNCC: 3 | RNVC: 2

21 Sep 2006

5340-66-125-2737
Angle Bracket

661252737
DE580180725: RNCC: 3 | RNVC: 2

2 Jan 1986

5340-66-147-2637
Plug

661472637
DZT809: RNCC: 3 | RNVC: 2

15 Dec 2000

5340-66-036-8401
Cover Plate

660368401
CA30037: RNCC: 3 | RNVC: 2

12 Aug 1970

5340-66-160-2370
Retaining Clip

661602370
550-2-8: RNCC: 3 | RNVC: 2
121312: RNCC: 5 | RNVC: 2

4 May 2012

5340-66-149-7164
Turnbuckle

661497164
NO PRIMARY REF 66-149-7164: RNCC: 3 | RNVC: 2
00484721: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-150-1399
Ear Plugs Decidamp

661501399
NO PRIMARY REF 66-150-1399: RNCC: 3 | RNVC: 2
05641817: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-157-4509
Mounting Bracket

661574509
V01-03-01-00-00: RNCC: 3 | RNVC: 2

25 Nov 2008

5340-66-137-1324
Door Handle

661371324
A200230 SHEET 1 OF 2 ITEM 9: RNCC: 3 | RNVC: 2

5 Sep 1992

5340-66-157-6884
Dust And Moisture Seal Protective Cap

661576884
8740-4407: RNCC: 3 | RNVC: 2
8740-4407: RNCC: 5 | RNVC: 2

13 Feb 2009

5340-66-151-6299
Manual Control Handle

661516299
NO PRIMARY REF 66-151-6299: RNCC: 3 | RNVC: 2
EO11514: RNCC: 5 | RNVC: 2

28 Aug 2003

5340-66-142-3959
General Purpose Resilient Mount

661423959
P471-90200-101T14: RNCC: 3 | RNVC: 2

12 Jul 1996

5340-66-105-8955
Angle Bracket

661058955
AMR/AVL/44-12: RNCC: 3 | RNVC: 2

6 Mar 1981

5340-66-152-5198
Mounting Bracket

661525198
FEGL5784D099: RNCC: 3 | RNVC: 2

18 Jan 2005

5340-66-157-2753
Mounting Bracket

661572753
47QM29411M: RNCC: 3 | RNVC: 2

23 Sep 2008

5340-66-131-0360
Dust And Moisture Seal Protective Plug

661310360
A201320: RNCC: 3 | RNVC: 2

28 Oct 1988

5340-66-125-4411
Webbing Strap

661254411
PBA25: RNCC: 3 | RNVC: 2

18 Apr 1986

5340-66-120-6756
Fwd. Hinge Half

661206756
12S1796-11-144: RNCC: 3 | RNVC: 2

13 Oct 1986

5340-66-160-6537
Mounting Bracket

661606537
ID25-243: RNCC: 3 | RNVC: 2

3 Oct 2012

5340-66-147-4485
Mounting Plate

661474485
0774D03: RNCC: 3 | RNVC: 2
22-0774A-02: RNCC: 3 | RNVC: 2

7 May 2001

5340-66-142-5533
Spacing Threaded Standoff

661425533
471-60801-104: RNCC: 3 | RNVC: 2

23 Oct 1996

5340-66-158-6950
Manual Control Handle

661586950
537 00 12-01: RNCC: 3 | RNVC: 2
537 00 12-01: RNCC: 5 | RNVC: 2

10 Jun 2010

5340-66-154-5631
Mounting Bracket

661545631
008-02170-001: RNCC: 3 | RNVC: 2

6 Jul 2006

5340-66-157-7312
Manual Control Lever

661577312
503 62 77-01: RNCC: 3 | RNVC: 2
503 62 77-01: RNCC: 5 | RNVC: 2

2 Mar 2009

5340-66-152-3627
Mounting Bracket

661523627
15006096: RNCC: 3 | RNVC: 2

29 Sep 2004

5340-66-146-0228
Webbing Strap

661460228
AS/NZS 4380:1996: RNCC: 3 | RNVC: 1
240503B-80: RNCC: 3 | RNVC: 2
11-240503B-80: RNCC: 3 | RNVC: 2

13 Mar 2000

5340-66-148-8287
Mounting Bracket

661488287
MH-A611-0015-A3: RNCC: 3 | RNVC: 2

19 Sep 2002

5340-66-143-8439
Electr Hardware Kit

661438439
DE530020041: RNCC: 3 | RNVC: 2
DE530020041: RNCC: 3 | RNVC: 2
MX-F247: RNCC: 3 | RNVC: 2

15 Aug 1997

5340-66-150-0636
Padlock

661500636
NO PRIMARY REF 66-150-0636: RNCC: 3 | RNVC: 2
03381766: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-158-7473
Mounting Plate

661587473
P10470-75: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-66-148-4246
Service Pack

661484246
25-522-101: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-66-054-5122
Catch Strike

660545122
857829R1: RNCC: 3 | RNVC: 2

26 Oct 1972

5340-66-141-7800
Mortise Lock

661417800
SFP004AP0005: RNCC: 3 | RNVC: 2
64-10-301-50: RNCC: 3 | RNVC: 2

19 Jan 1996

5340-66-153-4199
Mounting Plate

661534199
15013082-01: RNCC: 3 | RNVC: 2

15 Aug 2005

5340-66-152-8182
Retaining Strap

661528182
BMA-A16-0150-01: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-66-145-2472
Stanchon Stay

661452472
MH-A612-0013-A1: RNCC: 3 | RNVC: 2

26 Aug 1999

5340-66-158-1552
Mounting Plate

661581552
CRMP-001-V5-LHS: RNCC: 3 | RNVC: 2

7 Sep 2009

5340-66-160-9670
Mounting Bracket

661609670
7-6504/2: RNCC: 3 | RNVC: 2

28 Mar 2013

5340-66-160-8422
Friction Catch

661608422
33.43631-P1: RNCC: 3 | RNVC: 2

4 Feb 2013

5340-66-144-8945
General Purpose Access Door

661448945
487177538: RNCC: 3 | RNVC: 2
487 1775-38: RNCC: 3 | RNVC: 2
487181854: RNCC: 5 | RNVC: 2

23 Apr 1999

5340-66-123-4502
Bracket

661234502
33-31169-5: RNCC: 3 | RNVC: 2

13 Dec 1985

5340-66-154-4030
Headless Straight Rod

661544030
471-60801-187: RNCC: 3 | RNVC: 2
471-60801-187: RNCC: 5 | RNVC: 2

16 May 2006

5340-66-165-2020
Dus Protective Plug

5340-66-154-9709
Multiple Angle Bracket

661549709
5497021: RNCC: 3 | RNVC: 2

26 Oct 2006

5340-66-152-7840
Mounting Bracket

661527840
HRV300014001: RNCC: 3 | RNVC: 2

17 Mar 2005

5340-66-110-8155
Pipe Hanger

661108155
181: RNCC: 3 | RNVC: 1

7 Feb 1984

5340-66-089-2704
Compression Cup

660892704
LEATHER CUP: RNCC: 3 | RNVC: 1

9 Jul 1972

5340-66-154-8186
Buckle

661548186
FL007: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-66-138-6337
Lock-Release Lever

661386337
B831F339/9: RNCC: 3 | RNVC: 2

2 Mar 1994

5340-66-023-5291
Door Closer

660235291
403: RNCC: 3 | RNVC: 2
01045575: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-66-153-2295
Access Cover

661532295
1573/40/03: RNCC: 3 | RNVC: 2

24 Jun 2005

5340-66-155-8475
Finger

661558475
471-51806-105T01: RNCC: 3 | RNVC: 2
504320: RNCC: 5 | RNVC: 2

15 Jun 2007

5340-66-021-4239
Expansion Shield

660214239
L0XIN5-8IN: RNCC: 3 | RNVC: 2
12-84475: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-143-9655
Electronic Equipment Hardware Kit

661439655
MX-F340: RNCC: 3 | RNVC: 2

5 Dec 1997

5340-66-156-7095
Mounting Bracket

661567095
BMF-A05-0277-01: RNCC: 3 | RNVC: 2

4 Mar 2008

5340-66-144-7336
Mounting Bracket

661447336
MH-A167-0003-C1: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-66-149-5765
Permanent Magnet

661495765
NO PRIMARY REF 66-149-5765: RNCC: 3 | RNVC: 2
QTMRS6: RNCC: 5 | RNVC: 2

7 Apr 2003

5340-66-155-8512
Mounting Bracket

661558512
471-50832-118: RNCC: 3 | RNVC: 2
510433: RNCC: 5 | RNVC: 2

18 Jun 2007

5340-66-058-2949
Retaining Strap

660582949
FG367: RNCC: 3 | RNVC: 2

18 Sep 1974

5340-66-158-8161
General Purpose Guard Rail Section

661588161
P0000019: RNCC: 3 | RNVC: 2

11 Aug 2010

5340-66-150-0243
Swivel Caster

661500243
NO PRIMARY REF 66-150-0243: RNCC: 3 | RNVC: 2
00353532: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-139-5862
Mounting Bracket

661395862
1208-0009-01: RNCC: 3 | RNVC: 2

5 Jul 1994

5340-66-148-8506
Seal Retaining Plate

661488506
OED-1749-09-43: RNCC: 3 | RNVC: 2

24 Oct 2002

5340-66-144-0101
Electronic Equipment Hardware Kit

661440101
MX-F341: RNCC: 3 | RNVC: 1

17 Dec 1997

5340-66-028-1124
Helical Compression Spring Seat

660281124
GEE213: RNCC: 3 | RNVC: 2

26 Sep 1986

5340-66-148-3938
Cover

661483938
C17612: RNCC: 3 | RNVC: 2

8 Mar 2002

5340-66-054-3908
Spring Holder

660543908
RPH1855: RNCC: 3 | RNVC: 2
678-082980: RNCC: 5 | RNVC: 2

27 Aug 1972

5340-66-120-6753
Fwd. Hinge Half

661206753
12S1796-11-139: RNCC: 3 | RNVC: 2

13 Oct 1986

5340-66-125-2596
Webbing Strap

661252596
DE580180788: RNCC: 3 | RNVC: 2
AS25-TBS: RNCC: 5 | RNVC: 2

2 Jan 1986

5340-66-158-0073
Bumper

661580073
JMS2015-17: RNCC: 3 | RNVC: 2

17 Jun 2009

5340-66-125-4450
Access Cover

661254450
404-002-013: RNCC: 3 | RNVC: 2

21 Apr 1986

5340-66-145-0047
Pipe Bracket

661450047
MH-A613-0001-C1: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-66-154-7712
Retaining Strap

661547712
TIS-007-321: RNCC: 3 | RNVC: 2

1 Sep 2006

5340-66-144-7310
Hasp Staple

661447310
MH-A167-003-A4: RNCC: 3 | RNVC: 2

27 Jan 1999

5340-66-149-5784
Permanent Magnet

661495784
NO PRIMARY REF 66-149-5784: RNCC: 3 | RNVC: 2
QTTMB3200: RNCC: 5 | RNVC: 2

7 Apr 2003

5340-66-106-1527
Loop Clamp

661061527
622324: RNCC: 3 | RNVC: 2
R622324: RNCC: 5 | RNVC: 2

28 Jul 1980

5340-66-151-3415
Mounting Bracket

661513415
ARLM0075-1: RNCC: 3 | RNVC: 2
ARLM0075-1: RNCC: 5 | RNVC: 1

4 Mar 2004

5340-66-158-6110
Angle Bracket

661586110
MP09004002-1: RNCC: 3 | RNVC: 2

16 Apr 2010

5340-66-156-9506
Loop Clamp

661569506
MG0125: RNCC: 3 | RNVC: 2
MG0125: RNCC: 5 | RNVC: 2

16 Jun 2008

5340-66-145-8380
Roller

661458380
001.415.46: RNCC: 3 | RNVC: 2

1 Dec 1999

5340-66-145-4185
Keeper Pin Asssembl

661454185
HKA100BK: RNCC: 3 | RNVC: 2

10 Aug 1999

5340-66-120-2181
Turnbuckle

661202181
706-01008: RNCC: 3 | RNVC: 2

14 Mar 1984

5340-66-160-7005
Mounting Bracket

661607005
90-5911--04: RNCC: 3 | RNVC: 2

26 Oct 2012

5340-66-156-5391
Angle Bracket

661565391
31-80-00503-01: RNCC: 3 | RNVC: 2

8 Jan 2008

5340-66-158-3076
Bumper

661583076
800-360009: RNCC: 3 | RNVC: 2

5 Nov 2009

5340-66-157-8868
Mounting Plate

661578868
BMA-A19-0133-01: RNCC: 3 | RNVC: 2

4 May 2009

5340-66-154-8062
Lever Bracket

661548062
471-60801-125: RNCC: 3 | RNVC: 2
506695: RNCC: 5 | RNVC: 2

8 Sep 2006

5340-66-158-2498
Manual Control Lever

661582498
760-013: RNCC: 3 | RNVC: 2
70-98-5003: RNCC: 5 | RNVC: 2

12 Oct 2009

5340-66-158-7698
Mounting Bracket

661587698
BME-A05-0203-01: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-66-155-4755
Mounting Bracket

661554755
ARLM0840-1: RNCC: 3 | RNVC: 2

29 Mar 2007

5340-66-155-1055
Angle Bracket

661551055
RAY171004-1: RNCC: 3 | RNVC: 2

5 Dec 2006

5340-66-159-8257
Access Cover

661598257
471-60233-3: RNCC: 3 | RNVC: 2

27 Feb 2012

5340-66-156-0410
Webbing Strap

661560410
TF01421-1: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-66-146-3749
Snubber Assembly

661463749
427-B12-013: RNCC: 3 | RNVC: 2

17 Apr 2000

5340-66-146-3754
Terminal

661463754
43-3844: RNCC: 3 | RNVC: 2

17 Apr 2000

5340-66-140-5822
Block Assembly

661405822
004-153-02: RNCC: 3 | RNVC: 2

26 Oct 1995

5340-66-154-9840
Helical Compression Spring Retainer

661549840
0621-014-021: RNCC: 3 | RNVC: 2

1 Nov 2006

5340-66-153-8571
Dust And Moisture Seal Protective Cap

661538571
CS-75: RNCC: 3 | RNVC: 2
CS-75: RNCC: 5 | RNVC: 2

17 Nov 2005

5340-66-132-2258
Safety Plug

661322258
222214-01: RNCC: 3 | RNVC: 2
A201520: RNCC: 3 | RNVC: 2

25 Aug 1989

5340-66-152-7920
Mounting Bracket

661527920
BMMA 0602: RNCC: 3 | RNVC: 2

17 Mar 2005

5340-66-142-2098
Detent Plunger

661422098
471-41214-3: RNCC: 3 | RNVC: 2
511357: RNCC: 5 | RNVC: 2

20 Mar 1996

5340-66-145-4673
Mounting Bracket

661454673
608/2/57420/006: RNCC: 3 | RNVC: 2

23 Sep 1999

5340-66-134-2504
Dust And Moisture Seal Protective Cap

661342504
5209-3: RNCC: 3 | RNVC: 2

16 Jul 1991

5340-66-152-6893
Dust And Moisture Seal Protective Cover

661526893
NALM00047-3: RNCC: 3 | RNVC: 2
NALM00047-3: RNCC: 5 | RNVC: 1

20 May 2005

5340-66-150-2029
Support Hook

661502029
NO PRIMARY REF 66-150-2029: RNCC: 3 | RNVC: 2
04057703: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-148-1992
Dust And Moisture Seal Protective Cap

661481992
SC-T: RNCC: 3 | RNVC: 2

12 Feb 2002

5340-66-082-9994
B Counterflap Hinge

660829994
16-828: RNCC: 3 | RNVC: 2
20-98184559: RNCC: 3 | RNVC: 2

24 Jan 1975

5340-66-153-2718
Mounting Bracket

661532718
A210 0306-2: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-152-5471
Psu Door Stay

661525471
CX25-M118: RNCC: 3 | RNVC: 2

14 Oct 2004

5340-66-146-0477
Dust And Moisture Seal Protective Cover

661460477
561740: RNCC: 3 | RNVC: 2
561740: RNCC: 5 | RNVC: 2
561740: RNCC: 5 | RNVC: 2

7 Apr 2000

5340-66-136-0630
Mounting Bracket

661360630
26-08181: RNCC: 3 | RNVC: 2
A011538 SHEET 33: RNCC: 3 | RNVC: 2

28 Mar 1992

5340-66-135-9928
Nonmetallic Bumper

661359928
HOTT-31-22: RNCC: 3 | RNVC: 2

20 Mar 1992

5340-66-158-0074
Bumper

661580074
JMS2015-16: RNCC: 3 | RNVC: 2

17 Jun 2009

5340-66-155-6292
Handwheel

661556292
471-30204-206: RNCC: 3 | RNVC: 2
509122: RNCC: 5 | RNVC: 2

30 Apr 2007

5340-66-092-8559
Webbing Strap

660928559
602719: RNCC: 3 | RNVC: 2
200450-3: RNCC: 5 | RNVC: 9

23 Aug 1976

5340-66-158-7707
Butt Hinge

661587707
BMA-A05-1680-01: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-66-123-8508
Mounting Bracket

661238508
ARLM0118-002: RNCC: 3 | RNVC: 2

2 Nov 1998

5340-66-149-5693

5340-66-153-3530

5340-66-143-3978
Cap

661433978
492150: RNCC: 3 | RNVC: 2

23 Apr 1998

5340-66-145-7818
Catch Strike

661457818
M139-4S-583/1H: RNCC: 3 | RNVC: 2
M139-4M-538/1H: RNCC: 3 | RNVC: 2

10 Nov 1999

5340-66-155-3635
Mounting Bracket

661553635
471-40217-124: RNCC: 3 | RNVC: 2
508665: RNCC: 5 | RNVC: 2

13 Mar 2007

5340-66-154-6169
Mounting Plate

661546169
471-50806-112: RNCC: 3 | RNVC: 2
509420: RNCC: 5 | RNVC: 2

25 Jul 2006

5340-66-145-0267
Stand Base

661450267
11852: RNCC: 3 | RNVC: 2
P11-852: RNCC: 3 | RNVC: 2

19 May 1999

5340-66-148-7353
Access Cover

661487353
NALM00158-17: RNCC: 3 | RNVC: 2

14 Apr 2003

5340-66-157-8662
Mounting Bracket

661578662
BMA-A19-0143-01: RNCC: 3 | RNVC: 2

27 Apr 2009

5340-66-155-6658
Mounting Bracket

661556658
471-90614-101: RNCC: 3 | RNVC: 2
520850: RNCC: 5 | RNVC: 2

3 May 2007

5340-66-157-6769
Frame Support Rod

661576769
D-2660: RNCC: 3 | RNVC: 2

9 Feb 2009

5340-66-158-2252
Angle Bracket

661582252
K11477-403: RNCC: 3 | RNVC: 2

5 Oct 2009

5340-66-108-4970
Spacing Threaded Standoff

661084970
606-2783-011: RNCC: 3 | RNVC: 2

29 May 1981

5340-66-157-7337
Access Cover

661577337
503 75 11-03: RNCC: 3 | RNVC: 2
503 75 11-03: RNCC: 5 | RNVC: 2

2 Mar 2009

5340-66-160-2643
Mounting Bracket

661602643
BDI 25901: RNCC: 3 | RNVC: 2

16 May 2012

5340-66-146-3514
Strap

661463514
240503A-45: RNCC: 3 | RNVC: 2

12 Apr 2000

5340-66-147-4093
Gas Strut

661474093
Q EDE VHST/41005: RNCC: 3 | RNVC: 2
41005: RNCC: 5 | RNVC: 2

2 May 2001

5340-66-116-5539
Retaining Strap

661165539
180/50: RNCC: 3 | RNVC: 2

6 Oct 1983

5340-66-106-5764
Nonmetallic Bumper

661065764
7730: RNCC: 3 | RNVC: 2

14 Jul 1980

5340-66-120-6748
Fwd. Hinge Half

661206748
12S1796-11-130: RNCC: 3 | RNVC: 2

13 Oct 1986

5340-66-147-7886
Mounting Plate

661477886
F/2888-550-018B: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-018B: RNCC: 5 | RNVC: 2

21 Sep 2001

5340-66-157-2418
Mounting Plate

661572418
DE253020004-5: RNCC: 3 | RNVC: 2

12 Sep 2008

5340-66-155-7195
Mounting Bracket

661557195
X50QE240A: RNCC: 3 | RNVC: 2

15 May 2007

5340-66-154-9603
Padlock

661549603
234B45/619/5KD: RNCC: 3 | RNVC: 2

23 Oct 2006

5340-66-072-1783
Surface Bolt

660721783
A400-8IN: RNCC: 3 | RNVC: 2

5 Jul 1974

5340-66-157-0299
Mounting Plate

661570299
195134-1: RNCC: 3 | RNVC: 2
HSA005274: RNCC: 5 | RNVC: 2

9 Jul 2008

5340-66-158-6801
Mounting Bracket

661586801
RAY184022-2: RNCC: 3 | RNVC: 2
RAY184022-2: RNCC: 5 | RNVC: 2

3 Jun 2010

5340-66-157-2415
Mounting Plate

661572415
DE253020004-2: RNCC: 3 | RNVC: 2

12 Sep 2008

5340-66-148-0390
Delrin Bbp Retainer

661480390
NALM00126-1: RNCC: 3 | RNVC: 2

13 Aug 2002

5340-66-016-2483
Buckle

660162483
ADE(M)183-2: RNCC: 3 | RNVC: 2
374: RNCC: 4 | RNVC: 1

1 Jan 1968

5340-66-154-5927
Mounting Bracket

661545927
NALM00184-3: RNCC: 3 | RNVC: 2
NALM00184-3: RNCC: 5 | RNVC: 1
NALM00184-3: RNCC: 5 | RNVC: 1

19 Jul 2006

5340-66-159-8163
General Purpose Resilient Mount

661598163
P471-80200-101T34: RNCC: 3 | RNVC: 2

22 Feb 2012

5340-66-150-1587
Dust And Moisture Seal Protective Cap

661501587
NO PRIMARY REF 66-150-1587: RNCC: 3 | RNVC: 2
00955723: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-155-9070
Mounting Bracket

661559070
471-50809-214T02: RNCC: 3 | RNVC: 2
502651: RNCC: 5 | RNVC: 2

27 Jun 2007

5340-66-131-6467
Dust And Moisture Seal Protective Cap

661316467
640/2/30564/004: RNCC: 3 | RNVC: 2

11 Jan 1989

5340-66-068-3827
Angle Bracket

660683827
613-0016-001: RNCC: 3 | RNVC: 2

19 Mar 1974

5340-66-132-0866
Mounting Bracket

661320866
GH1018/10: RNCC: 3 | RNVC: 2

19 Apr 1989

5340-66-160-4279
Helical Compression Spring Seat

661604279
KRD-31-17: RNCC: 3 | RNVC: 2

19 Jul 2012

5340-66-152-2651
General Purpose Resilient Mount

661522651
BMA-H08-0013-01: RNCC: 3 | RNVC: 2

29 Sep 2004

5340-66-155-8826
Mounting Bracket

661558826
471-50824-104: RNCC: 3 | RNVC: 2
509586: RNCC: 5 | RNVC: 2

25 Jun 2007

5340-66-142-3962
General Purpose Resilient Mount

661423962
P471-90200-101T03: RNCC: 3 | RNVC: 2

12 Jul 1996

5340-66-153-7802
Mounting Plate

661537802
861728-4: RNCC: 3 | RNVC: 2
861728-4: RNCC: 5 | RNVC: 2
861728-4: RNCC: 5 | RNVC: 2

28 Oct 2005

5340-66-154-7976
Access Cover

661547976
6.036.155: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-66-156-4494
Mounting Bracket

661564494
15013484-04: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-66-155-9102
Mechanical Stop

661559102
471-50809-221: RNCC: 3 | RNVC: 2
502660: RNCC: 5 | RNVC: 2

27 Jun 2007

5340-66-142-6316
General Purpose Access Door

661426316
195109: RNCC: 3 | RNVC: 2

10 Dec 1996

5340-66-158-5869
Electronic Equipment Hardware Kit

661585869
BM650032: RNCC: 3 | RNVC: 2

1 Apr 2010

5340-66-158-7092
Mounting Plate

661587092
RBP34: RNCC: 3 | RNVC: 2

22 Jun 2010

5340-66-154-9181
Dust And Moisture Seal Protective Cap

661549181
15014132: RNCC: 3 | RNVC: 2

6 Oct 2006

5340-66-158-4566
Angle Bracket

661584566
DE590650007: RNCC: 3 | RNVC: 2

1 Feb 2010

5340-66-139-3288
Mounting Bracket

661393288
DE250530340: RNCC: 3 | RNVC: 2

22 Jan 1996

5340-66-147-2590
Panel

661472590
DAP172: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-66-133-6450
Catch Strike

661336450
20: RNCC: 3 | RNVC: 2

12 Feb 1990

5340-66-124-4029
Mounting Bracket

661244029
A200864 SHEET 12 ITEM2: RNCC: 3 | RNVC: 2

3 Apr 1986

5340-66-152-3794
Butt Hinge

661523794
C6-29: RNCC: 3 | RNVC: 2
DF01-603-2: RNCC: 3 | RNVC: 2

12 Oct 2004

5340-66-149-3048
Permanent Magnet

661493048
NO PRIMARY REF 66-149-3048: RNCC: 3 | RNVC: 2
09160708: RNCC: 5 | RNVC: 2

26 Mar 2003

5340-66-117-9265
Hinge

661179265
350A21-1214-23: RNCC: 3 | RNVC: 2

16 Jun 1984

5340-66-153-6704
Webbing Strap

661536704
9125D05046001-001: RNCC: 3 | RNVC: 2

11 Oct 2005

Load More Results