What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is a Hasp Staple?

A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

Hardware, Commercial - Australia (AU)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Australia (AU) - NCB is 66

Page 20 of 29

NSN Format for Hardware, Commercial
Codified by Australia

53	40	66	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Australia (AU)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 53 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 78 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 109 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 25 Items
Holder,Spring 26 Items
What is a Compression Cup? 11 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 43 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 85 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 54 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 27 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 249 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 36 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 87 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 39 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 11 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 16 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 15 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Rim Latch? 18 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Rim Lock? 13 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 12 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 17 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 17 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 18 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 103 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 11 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 59 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 14 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 14 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Plug Button? 12 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Corrosion Preventive Anode? 27 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 78 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 268 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 88 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 70 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 36 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 40 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 41 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Plain Solid Disk? 41 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 12 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 608 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 57 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 54 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 317 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 48 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 40 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 83 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Quick Release Plunger? 17 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 65 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 24 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 14 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 22 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 49 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 19 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 151 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 15 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 444 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 128 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 42 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 53 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 25 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 201 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 33 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 133 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 42 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 54 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Strapping? 28 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 75 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Screw Thread Insert And Tool Assortment? 18 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 28 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 18 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 740 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 11 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 14 Items
What is an Antipilferage Seal? 27 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 129 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Seal Retaining Plate? 29 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 47 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1862 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 15 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 11 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 10 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 766 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 27 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 65 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 79 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 71 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 22 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 12 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 14 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 35 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 50 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 28 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 15 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 20 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 11 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 83 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 138 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 393 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 38 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 11 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 22 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
What is a Key Blank? 22 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 10 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 114 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 11 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 20 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 12 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is a Bumper? 74 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 20 of 29

5340-66-138-9588
Support

661389588
YA4354752003: RNCC: 3 | RNVC: 2
0064-35-475-2003: RNCC: C | RNVC: 1

12 Nov 1993

5340-66-151-0702
Mounting Bracket

661510702
LTA-A05-0306-01: RNCC: 3 | RNVC: 2
LTA-A05-0306: RNCC: 5 | RNVC: 2

6 May 2003

5340-66-151-0707
Mounting Bracket

661510707
LTA-A12-088-001: RNCC: 3 | RNVC: 2
LTA-A12-088: RNCC: 5 | RNVC: 2

6 May 2003

5340-66-120-6758
Fwd. Hinge Half

661206758
12S1796-11-147: RNCC: 3 | RNVC: 2

13 Oct 1986

5340-66-158-0080
Magnetic Catch

661580080
JMS2013-45-4: RNCC: 3 | RNVC: 2

17 Jun 2009

5340-66-155-5606
Flanged Ring

661555606
471-30465-103: RNCC: 3 | RNVC: 2
502294: RNCC: 5 | RNVC: 2

16 Apr 2007

5340-66-145-4541
Transistor Alignmen

661454541
608/2/58647/000: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-66-045-3779
Key Blank

660453779
C30: RNCC: 3 | RNVC: 2

26 Jan 1972

5340-66-146-5263
Polarity Cap

661465263
0110144000000: RNCC: 3 | RNVC: 2

23 Jun 2000

5340-66-144-5993
Bolt And Spacer Kit

661445993
801276: RNCC: 3 | RNVC: 2
PL1GV5020C100022/9036: RNCC: 3 | RNVC: 2

5 Jan 1999

5340-66-122-4425
Spring Tension Clip

5340-66-155-8573
Lock Ring

661558573
471-51805-122: RNCC: 3 | RNVC: 2
504282: RNCC: 5 | RNVC: 2

18 Jun 2007

5340-66-152-1393
General Purpose Access Door

661521393
BMA-A05-0848: RNCC: 3 | RNVC: 2

10 Jul 2004

5340-66-156-3779
Hand Crank

661563779
10001449-04: RNCC: 3 | RNVC: 2
GN472.3-80-V10: RNCC: 5 | RNVC: 2

13 Nov 2007

5340-66-158-3646
Strap Hinge

661583646
30V-06-0066-025: RNCC: 3 | RNVC: 2
S9224 38X38X4 2/2: RNCC: 5 | RNVC: 2

27 Nov 2009

5340-66-133-6431
Mending Plate

661336431
V0H200-14: RNCC: 3 | RNVC: 2

12 Feb 1990

5340-66-135-7112
Dust And Moisture Seal Boot

661357112
8K1-82370-20: RNCC: 3 | RNVC: 2

7 Jan 1992

5340-66-051-7438
Angle Bracket

5340-66-133-6427
Synchro Clamp

661336427
V0H300-16: RNCC: 3 | RNVC: 2

9 Feb 1990

5340-66-149-9446
Retaining Strap

661499446
NO PRIMARY REF 66-149-9446: RNCC: 3 | RNVC: 2
02416256: RNCC: 5 | RNVC: 2

10 Apr 2003

5340-66-156-0030
Mounting Plate

661560030
580-175-000: RNCC: 3 | RNVC: 2

23 Jul 2007

5340-66-158-7604
Mounting Bracket

661587604
BMA-A08-0248: RNCC: 3 | RNVC: 2

28 Jul 2010

5340-66-157-4888
Angle Bracket

661574888
V01-15-01-19-01: RNCC: 3 | RNVC: 2

30 Nov 2008

5340-66-139-8468
General Purpose Resilient Mount

661398468
981-099-274-24: RNCC: 3 | RNVC: 2

31 Aug 1994

5340-66-160-9200
Mounting Bracket

661609200
15013484-09: RNCC: 3 | RNVC: 2

6 Mar 2013

5340-66-158-8795
Access Cover

661588795
02455-150200: RNCC: 3 | RNVC: 2

21 Sep 2010

5340-66-157-8828
Mounting Bracket

661578828
RP400226: RNCC: 3 | RNVC: 2

1 May 2009

5340-66-142-8225
Mounting Bracket

661428225
658/2/05248/000: RNCC: 3 | RNVC: 2

23 Jan 1997

5340-66-157-6402
Mounting Bracket

661576402
DE253280035: RNCC: 3 | RNVC: 2

28 Jan 2009

5340-66-140-5846
Wear Strip

661405846
004-357: RNCC: 3 | RNVC: 2

10 Nov 1995

5340-66-155-8153
Manual Control Handle

661558153
471-50808-123: RNCC: 3 | RNVC: 2
502522: RNCC: 5 | RNVC: 2

6 Jun 2007

5340-66-156-5945
Mechanical Stop

661565945
P10009-2-10: RNCC: 3 | RNVC: 2

31 Jan 2008

5340-66-157-7255

5340-66-151-7349
Dust And Moisture Seal Protective Cap

661517349
MLC-0082: RNCC: 3 | RNVC: 2
C500-201: RNCC: 3 | RNVC: 2

17 Dec 2003

5340-66-146-1048
Mortise Lock Set

661461048
471 7826-10: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-66-146-3506
Strap

5340-66-133-7149
Webbing Strap

5340-66-151-1968

5340-66-149-5679

5340-66-149-5780
Permanent Magnet

661495780
NO PRIMARY REF 66-149-5780: RNCC: 3 | RNVC: 2
QTTMB2300: RNCC: 5 | RNVC: 2

7 Apr 2003

5340-66-147-7739
Ring Thrust

661477739
45069: RNCC: 3 | RNVC: 2

11 Oct 2001

5340-66-129-8899
Mounting Bracket

661298899
016AMR394-1: RNCC: 3 | RNVC: 2

6 Apr 2001

5340-66-126-8937
Nonmetallic Bumper

661268937
566-564-12212: RNCC: 3 | RNVC: 2

19 Aug 1986

5340-66-017-9145
Butt Hinge

660179145
WELD0M838: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

1 Jan 1968

5340-66-139-3058
Elastic Strap

661393058
BLA 5705: RNCC: 3 | RNVC: 2

15 Aug 1994

5340-66-156-1462
Dust And Moisture Seal Protective Plug

661561462
ASG 2021/2: RNCC: 3 | RNVC: 2

6 Sep 2007

5340-66-138-0167
General Purpose Resilient Mount

661380167
P471-90200-101-T06: RNCC: 3 | RNVC: 2

27 Aug 1993

5340-66-025-8834
Spring Tension Clip

660258834
SNB1167-170: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-154-6824
Access Cover

661546824
VTR251-2TSUB14F4T19-7IIINM40W3P-: RNCC: 3 | RNVC: 1

11 Aug 2006

5340-66-111-3541
Dust And Moisture Seal Protective Plug Set

661113541
T18620: RNCC: 3 | RNVC: 2

18 Mar 1987

5340-66-145-9603
Connector

661459603
HL-13-8-NG: RNCC: 3 | RNVC: 2

26 Oct 2001

5340-66-159-5920
Bumper

661595920
A1-16444-232/2: RNCC: 3 | RNVC: 2

19 Oct 2011

5340-66-154-7646
Mounting Plate

661547646
15003971: RNCC: 3 | RNVC: 2

31 Aug 2006

5340-66-159-2696
Webbing Strap

661592696
1400-03-0101C1: RNCC: 3 | RNVC: 2
QVRL140003010C1: RNCC: 5 | RNVC: 2
1400-03-0101C1: RNCC: 6 | RNVC: 9

11 May 2011

5340-66-160-3353
General Purpose Access Door

661603353
BMD-A06-0024-02: RNCC: 3 | RNVC: 2

14 Jun 2012

5340-66-155-8411
Retaining Band

661558411
471-50809-2T02: RNCC: 3 | RNVC: 2
502679: RNCC: 5 | RNVC: 2

14 Jun 2007

5340-66-139-1578
Electronic Equipment Hardware Kit

661391578
MX-F123: RNCC: 3 | RNVC: 2
DE530020012: RNCC: 3 | RNVC: 2

4 May 1994

5340-66-147-3717
General Purpose Resilient Mount

661473717
710-7936: RNCC: 3 | RNVC: 2

4 Apr 2001

5340-66-150-0240
Swivel Caster

661500240
NO PRIMARY REF 66-150-0240: RNCC: 3 | RNVC: 2
00353022: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-010-5780
Mounting Bracket

660105780
854411R1: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-148-8617
Mounting Bracket

661488617
OED 1882: RNCC: 3 | RNVC: 2

30 Oct 2002

5340-66-142-9796
General Purpose Access Door

661429796
658/2/05402/000: RNCC: 3 | RNVC: 2

9 May 1997

5340-66-147-9397
Male Camlock To Bsp

661479397
AF080: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-66-157-2752
Mounting Bracket

661572752
50MB39405M2: RNCC: 3 | RNVC: 2

23 Sep 2008

5340-66-155-8317
Angle Bracket

661558317
X50RC376M: RNCC: 3 | RNVC: 2

13 Jun 2007

5340-66-154-3131
Dust And Moisture Seal Protective Cap-Plug

661543131
CP220: RNCC: 3 | RNVC: 2
1233877: RNCC: 5 | RNVC: 2

21 Apr 2006

5340-66-015-6790
Dust And Moisture Seal Boot

660156790
P27: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-036-6025
Angle Bracket

660366025
ADE(V)225-675: RNCC: 3 | RNVC: 2

4 Aug 1970

5340-66-157-4629
Lock Key

661574629
E3-3-1: RNCC: 3 | RNVC: 2

26 Nov 2008

5340-66-139-4013
Webbing Strap

661394013
CES13477/1830MM: RNCC: 3 | RNVC: 1

24 Oct 1994

5340-66-152-8185
Webbing Strap

661528185
BMA-A05-0939-01: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-66-028-0539
Retaining Strap

660280539
857927R1: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-143-0517
Mounting Bracket

661430517
DSA-10-388-1: RNCC: 3 | RNVC: 2

19 Mar 1997

5340-66-150-5813
Key Holder

661505813
NO PRIMARY REF 66-150-5813: RNCC: 3 | RNVC: 2
04069005: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-117-6664
Padlock

661176664
225: RNCC: 3 | RNVC: 2
03380797: RNCC: 5 | RNVC: 2
04072209: RNCC: 5 | RNVC: 2
5340-NA-000-0992: RNCC: 5 | RNVC: 9

13 Jul 1983

5340-66-146-3152
Lef Strap Assembly

661463152
2318-48550-00: RNCC: 3 | RNVC: 2
2318-48550-00: RNCC: 5 | RNVC: 2

4 Apr 2000

5340-66-154-2700
Spring Holder

661542700
S0007A1E1836-712: RNCC: 3 | RNVC: 2

10 Apr 2006

5340-66-130-9744
Extension Drawer Slide

661309744
371111020216/1: RNCC: 3 | RNVC: 2
371111020216: RNCC: 5 | RNVC: 1

7 Oct 1988

5340-66-137-7242
Clip Retaini Plate

661377242
1383-12/3: RNCC: 3 | RNVC: 2

23 Mar 1993

5340-66-143-9398
Contact Bloc Holder

661439398
DSA-22-1172-7: RNCC: 3 | RNVC: 2

9 Dec 1997

5340-66-145-9707
Shtu Re-Manufacture

661459707
M17-48751: RNCC: 3 | RNVC: 2

9 Nov 2001

5340-66-150-2864
Loop Clamp

661502864
NO PRIMARY REF 66-150-2864: RNCC: 3 | RNVC: 2
03278655: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-128-5579
Line Supporting Strap

661285579
H31815: RNCC: 3 | RNVC: 2
MYH3379: RNCC: 5 | RNVC: 2

4 Aug 1989

5340-66-125-0597
Cable Clamp

661250597
TSM179-H154: RNCC: 3 | RNVC: 2

22 Apr 1986

5340-66-128-4683
Hinged Hasp

661284683
390924: RNCC: 3 | RNVC: 2

3 Dec 1987

5340-66-140-2803
Mounting Bracket

661402803
AGF2382: RNCC: 3 | RNVC: 2

2 Feb 1995

5340-66-139-0337
Hood Hinge Bracket

661390337
68QM216: RNCC: 3 | RNVC: 2
A68QM216: RNCC: 3 | RNVC: 2
A68QM216: RNCC: 3 | RNVC: 9

28 Jan 1994

5340-66-154-6578
General Purpose Resilient Mount

661546578
471-20201-8T02: RNCC: 3 | RNVC: 2
513634: RNCC: 5 | RNVC: 2

7 Aug 2006

5340-66-126-2764
Angle Bracket

661262764
6G5-44526-00: RNCC: 3 | RNVC: 2
6G5-44526-00: RNCC: 3 | RNVC: 2

16 Jan 1991

5340-66-160-3882
Mounting Plate

661603882
ID32-214: RNCC: 3 | RNVC: 2

4 Jul 2012

5340-66-149-9450
Retaining Strap

661499450
NO PRIMARY REF 66-149-9450: RNCC: 3 | RNVC: 2
02416660: RNCC: 5 | RNVC: 2

10 Apr 2003

5340-66-088-4904
Mount Resil Ferrule

660884904
13-26227: RNCC: 3 | RNVC: 2

1 Feb 1976

5340-66-157-4525
Webbing Strap

661574525
468-A4-450: RNCC: 3 | RNVC: 2

25 Nov 2008

5340-66-138-7451
Manual Control Handle

661387451
196630-06170-1: RNCC: 3 | RNVC: 2

31 Mar 1994

5340-66-156-2541
T Bracket

661562541
A2100279: RNCC: 3 | RNVC: 2

8 Oct 2007

5340-66-155-9468
Dust And Moisture Seal Protective Cap-Plug

661559468
NO PRIMARY REF 66-155-9468: RNCC: 3 | RNVC: 2
12682092: RNCC: 5 | RNVC: 2
12682092: RNCC: 5 | RNVC: 2

5 Jul 2007

5340-66-023-8599
Loop Clamp

660238599
549-6278-002: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-134-9886
Webbing Strap

661349886
41659-10-2: RNCC: 3 | RNVC: 2

6 Feb 1991

5340-66-134-8326
Priming Plug

661348326
Z0A33-10-90: RNCC: 3 | RNVC: 2

9 Jul 1990

5340-66-150-0381
Casement Fastener

661500381
NO PRIMARY REF 66-150-0381: RNCC: 3 | RNVC: 2
04812065: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-154-9457
Bumper

661549457
1 221 736: RNCC: 3 | RNVC: 2

17 Oct 2006

5340-66-156-9536
Mounting Plate

661569536
DE250160006: RNCC: 3 | RNVC: 2
DEF(AUST)8372: RNCC: 4 | RNVC: 1

16 Jun 2008

5340-66-031-0367
Handle Grip

660310367
3539: RNCC: 3 | RNVC: 2

4 Dec 1968

5340-66-040-8318
Sealing Strip

660408318
7230-238-00: RNCC: 3 | RNVC: 2

27 Aug 1971

5340-66-156-1795
Dust And Moisture Seal Protective Cover

661561795
BDI 16700-40-22: RNCC: 3 | RNVC: 2

17 Sep 2007

5340-66-159-8750
Clamping Catch

661598750
1138.94: RNCC: 3 | RNVC: 1
1138.94-P1: RNCC: 3 | RNVC: 2
QVRL113894P1: RNCC: 5 | RNVC: 2
1138.94: RNCC: 6 | RNVC: 9
1138.94-P1: RNCC: 6 | RNVC: 9

7 Mar 2012

5340-66-156-5577
Track Stop

661565577
BMA-A07-0037: RNCC: 3 | RNVC: 2
BMA-A07-0037-01: RNCC: 3 | RNVC: 2

16 Jan 2008

5340-66-150-0752
Expansion Shield

661500752
NO PRIMARY REF 66-150-0752: RNCC: 3 | RNVC: 2
03754706: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-139-0341
Hood Hinge Bracket

661390341
X50QM241: RNCC: 3 | RNVC: 2
X50 QM241: RNCC: 3 | RNVC: 2
0050-00-005-0241: RNCC: C | RNVC: 1

28 Jan 1994

5340-66-158-2312
Mounting Plate

661582312
BMU-A05-2113-01: RNCC: 3 | RNVC: 2
BMU-A05-2113: RNCC: 5 | RNVC: 2

6 Oct 2009

5340-66-155-5790
Angle Bracket

661555790
X50QE38: RNCC: 3 | RNVC: 2

18 Apr 2007

5340-66-092-6103
Webbing Strap

660926103
ADE(M)534-6: RNCC: 3 | RNVC: 2
ADEM534-6: RNCC: 5 | RNVC: 2

16 Apr 1971

5340-66-019-5640
Expansion Plug

660195640
TYPE A: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-127-3627
Forward Brace

661273627
016AMR407-2: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-66-154-6403
Clamp

661546403
6.230.3181: RNCC: 3 | RNVC: 2

1 Aug 2006

5340-66-133-9199
Foam Acoustic

661339199
AA-COMP BL19/4/6: RNCC: 3 | RNVC: 2

3 Oct 1997

5340-66-141-0998
General Purpose Resilient Mount

661410998
1255330: RNCC: 3 | RNVC: 2

6 Sep 1995

5340-66-160-9517
Mechanical Stop

661609517
BMD-A26-0039-01: RNCC: 3 | RNVC: 2

21 Mar 2013

5340-66-118-6404
Steel Hinge

661186404
950-006: RNCC: 3 | RNVC: 2

8 Sep 1984

5340-66-128-4652
Plug Button

661284652
BPF 7/8: RNCC: 3 | RNVC: 2
MYH3268: RNCC: 5 | RNVC: 2

3 Dec 1987

5340-66-136-3839
Mounting Bracket

661363839
DE650030044: RNCC: 3 | RNVC: 2

4 Jan 1993

5340-66-138-6399
Mounting Plate

661386399
8612150: RNCC: 3 | RNVC: 2
3192150: RNCC: 3 | RNVC: 2
8612150: RNCC: 5 | RNVC: 2

3 Mar 1994

5340-66-086-0153
Angle Bracket

660860153
700-159: RNCC: 3 | RNVC: 2

8 Jun 1975

5340-66-031-6606
Nut And Bolt Locking Plate

660316606
L11835: RNCC: 3 | RNVC: 2

11 Mar 1969

5340-66-028-0754
Nonmetallic Bumper

660280754
235916: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-141-9292
Flange Protector

661419292
1163VULCAN01: RNCC: 3 | RNVC: 2

31 Jan 1996

5340-66-153-5524
O-Ring Splicing Kit

661535524
16224A: RNCC: 3 | RNVC: 2

12 Sep 2005

5340-66-157-5646
Webbing Strap

661575646
X/C/0190/13: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-66-161-2930
Nonmetallic Solid Wheel

661612930
LM-13NDB: RNCC: 3 | RNVC: 2

23 Aug 2013

5340-66-139-2887
Turnbuckle

661392887
SCES12151: RNCC: 3 | RNVC: 1
324213: RNCC: 5 | RNVC: 2

17 Aug 1994

5340-66-125-9531
Access Cover

661259531
016AMR300-8: RNCC: 3 | RNVC: 2

19 Jul 1990

5340-66-156-9431
Mechanical Stop

661569431
1002530: RNCC: 3 | RNVC: 2
WSH1002530: RNCC: 5 | RNVC: 2

12 Jun 2008

5340-66-144-6350
Retaining Clip

661446350
MYH3114: RNCC: 3 | RNVC: 2

9 Feb 1999

5340-66-097-7745
Guide Assy

660977745
TMGB206: RNCC: 3 | RNVC: 2

14 May 1978

5340-66-070-3856
Antipilferage Seal

660703856
3: RNCC: 3 | RNVC: 2

11 Aug 1974

5340-66-157-5126
Snap Hook

661575126
Z/F/0235/15: RNCC: 3 | RNVC: 2

5 Dec 2008

5340-66-097-7747
Folding Stay

660977747
TMGB156: RNCC: 3 | RNVC: 2

14 May 1978

5340-66-151-5792
Angle Bracket

661515792
LTA-A12-053: RNCC: 3 | RNVC: 1
LTA-A12-053-001: RNCC: 3 | RNVC: 2

21 Jul 2003

5340-66-148-3201
Webbing Strap

661483201
2902-DWG-58-M-9116 ITEMA: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-66-089-5599
Retaining Clip

660895599
85059R1: RNCC: 3 | RNVC: 2

13 Sep 1975

5340-66-155-1676
Guide Ring

661551676
347 092: RNCC: 3 | RNVC: 2

19 Dec 2006

5340-66-097-7746
Guide Assy

660977746
TMGB203: RNCC: 3 | RNVC: 2

14 May 1978

5340-66-137-8864
Manual Control Lever

661378864
121575-66510: RNCC: 3 | RNVC: 2

3 May 1993

5340-66-154-9329
Mounting Bracket

661549329
15013558: RNCC: 3 | RNVC: 2

11 Oct 2006

5340-66-150-0202
Rigid Caster

661500202
NO PRIMARY REF 66-150-0202: RNCC: 3 | RNVC: 2
01967210: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-153-2389
Compression Cup

661532389
1870 0250 187: RNCC: 3 | RNVC: 2
RMD092: RNCC: 3 | RNVC: 2
RMD092: RNCC: 5 | RNVC: 2

28 Jun 2005

5340-66-147-9413
Dust And Moisture Seal Protective Cap

661479413
ADC080: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-66-146-2720
Manual Air Vent

661462720
240039: RNCC: 3 | RNVC: 2
DAF M429: RNCC: 3 | RNVC: 2

13 Mar 2000

5340-66-149-5776
Permanent Magnet

661495776
NO PRIMARY REF 66-149-5776: RNCC: 3 | RNVC: 2
312202: RNCC: 5 | RNVC: 2

7 Apr 2003

5340-66-152-2650
Loop Clamp

661522650
BMA-H08-0012-01: RNCC: 3 | RNVC: 2

29 Sep 2004

5340-66-128-9093
Angle Bracket

661289093
MDA-A20-001: RNCC: 3 | RNVC: 2

27 Jan 1989

5340-66-157-3103
Locking Stay

661573103
1000082: RNCC: 3 | RNVC: 2
0.83.0001.4: RNCC: 5 | RNVC: 2

7 Oct 2008

5340-66-027-2527
Angle Bracket

660272527
ADE(V)94-275: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-059-8155
Head Guide

660598155
TT419: RNCC: 3 | RNVC: 2

12 Oct 1973

5340-66-108-8498
Swivel Caster

661088498
SPEEDFRAMESWIVELCASTOR: RNCC: 3 | RNVC: 1
070416: RNCC: 3 | RNVC: 2

22 Dec 1983

5340-66-094-5328
Screw Collar

660945328
1B3-50-25: RNCC: 3 | RNVC: 2

17 Apr 1977

5340-66-153-2514
Mack Adaptor

661532514
DE252190019: RNCC: 3 | RNVC: 2

30 Jun 2005

5340-66-157-4664
Handle Grip

661574664
V01-01-16-00-00: RNCC: 3 | RNVC: 2

26 Nov 2008

5340-66-143-3660
Housing

661433660
142469: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-66-150-0672
Padlock

661500672
NO PRIMARY REF 66-150-0672: RNCC: 3 | RNVC: 2
04854901: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-125-2412
Tie-Down Strap

661252412
DE580180775: RNCC: 3 | RNVC: 2

5 Dec 1985

5340-66-147-2572
Cradle Holder

661472572
DAG6030: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-66-143-8033
Ass Webbing Strap

661438033
1804-2-G78/1209 X 1.8 MTR O/ALL: RNCC: 3 | RNVC: 2

1 Aug 1997

5340-66-138-4517
Antipilferage Seal Locking Wire

661384517
84311070: RNCC: 3 | RNVC: 2
SU00400: RNCC: 5 | RNVC: 2

28 Oct 1993

5340-66-039-2289
Angle Bracket

660392289
AH53: RNCC: 3 | RNVC: 2

7 Apr 1971

5340-66-156-5016
Headless Straight Rod

661565016
DA 016: RNCC: 3 | RNVC: 2

12 Dec 2007

5340-66-146-6942
Fire Damper

661466942
MSD-MO-SB-280-160-250-SS: RNCC: 3 | RNVC: 2

9 Aug 2000

5340-66-150-2468
Hasp Staple

661502468
NO PRIMARY REF 66-150-2468: RNCC: 3 | RNVC: 2
04061100: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-152-6796
Igb Barrel Retainer

661526796
NALM00273-1: RNCC: 3 | RNVC: 2
NALM00273-1: RNCC: 5 | RNVC: 2

16 Feb 2005

5340-66-150-8158
General Purpose Resilient Mount

661508158
PS0013: RNCC: 3 | RNVC: 2

6 Aug 2003

5340-66-159-0857
Mounting Bracket

661590857
15018179: RNCC: 3 | RNVC: 2

2 Feb 2011

5340-66-160-2165
Angle Bracket

661602165
BMA-A05-1732-01: RNCC: 3 | RNVC: 2

30 Apr 2012

5340-66-118-6725
Spring Tension Clip

661186725
91405-671-000: RNCC: 3 | RNVC: 2

30 Mar 1984

5340-66-150-4032
Strapping

661504032
NO PRIMARY REF 66-150-4032: RNCC: 3 | RNVC: 2
05664917: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-154-7459
Webbing Strap

661547459
10006061-045: RNCC: 3 | RNVC: 2

28 Aug 2006

5340-66-158-5930
Access Cover

661585930
1728-BH-0888-01: RNCC: 3 | RNVC: 2

7 Apr 2010

5340-66-150-4031
Strapping

661504031
NO PRIMARY REF 66-150-4031: RNCC: 3 | RNVC: 2
05664713: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-148-2754
General Purpose Resilient Mount

661482754
M539887-60: RNCC: 3 | RNVC: 2
LTA08106: RNCC: 5 | RNVC: 2

20 May 2002

5340-66-156-5387
Mounting Plate

661565387
31-80-00533-00: RNCC: 3 | RNVC: 2

8 Jan 2008

5340-66-161-2670
Webbing Strap

661612670
1600-03-0203A1: RNCC: 3 | RNVC: 2
QVRL1600030203A1: RNCC: 5 | RNVC: 2

12 Aug 2013

5340-66-138-5660
Rod End Clevis

661385660
B831A541/19: RNCC: 3 | RNVC: 2

8 Sep 1995

5340-66-158-9263
Mechanical Stop

661589263
400113005: RNCC: 3 | RNVC: 2

26 Oct 2010

5340-66-142-4601
Pad Eye

661424601
51818: RNCC: 3 | RNVC: 2
RBS3: RNCC: 3 | RNVC: 2

3 Aug 1996

5340-66-066-4248
Angle Bracket

660664248
179123K: RNCC: 3 | RNVC: 2

7 Feb 1974

5340-66-049-2423
Dust And Moisture Seal Protective Cap

660492423
5411: RNCC: 3 | RNVC: 2

19 Jul 1972

5340-66-138-5204
Buckle

661385204
BB 70032: RNCC: 3 | RNVC: 2

24 Jan 1994

5340-66-157-9207
General Purpose Resilient Mount

661579207
501 26 97-04: RNCC: 3 | RNVC: 2
501 26 97-04: RNCC: 5 | RNVC: 2

15 May 2009

5340-66-161-4068
Flush Catch

661614068
224002-4: RNCC: 3 | RNVC: 2

14 Oct 2013

5340-66-139-0021
Angle Bracket

661390021
HYG3745: RNCC: 3 | RNVC: 2

6 Jan 1994

5340-66-084-8447
Mortise Lock Set

660848447
16450: RNCC: 3 | RNVC: 2

19 Oct 1975

5340-66-145-5818
Spacer

661455818
DE250980014: RNCC: 3 | RNVC: 2

7 Oct 1999

5340-66-145-2130
Rim Latch

661452130
M1-44: RNCC: 3 | RNVC: 2

17 Aug 1999

5340-66-147-2582
Housing

661472582
DAM62A7: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-66-126-9461
Multiplate P Plate

661269461
C2260G: RNCC: 3 | RNVC: 2

31 Oct 1986

5340-66-137-4713
Mounting Plate

661374713
K 39276: RNCC: 3 | RNVC: 2
K39276: RNCC: 3 | RNVC: 2

15 Jan 1993

5340-66-155-8838
Pin

661558838
471-50832-117: RNCC: 3 | RNVC: 2
510432: RNCC: 5 | RNVC: 2

25 Jun 2007

5340-66-139-2919
Mounting Plate

661392919
DE250530118: RNCC: 3 | RNVC: 2

12 Aug 1994

5340-66-161-2281
Caster Wheel

661612281
PU849-50: RNCC: 3 | RNVC: 2
PU849-50: RNCC: 5 | RNVC: 2

1 Aug 2013

5340-66-034-4151
Manual Control Lever

660344151
6F592: RNCC: 3 | RNVC: 2
GQ991-2: RNCC: 5 | RNVC: 2

29 Nov 1969

5340-66-157-2187
Mounting Bracket

661572187
010D004421: RNCC: 3 | RNVC: 2
010D004421: RNCC: 5 | RNVC: 2

8 Sep 2008

5340-66-154-8486
Mounting Bracket

661548486
15006175: RNCC: 3 | RNVC: 2

19 Sep 2006

5340-66-161-2837
Mounting Bracket

661612837
15019403: RNCC: 3 | RNVC: 2

21 Aug 2013

5340-66-160-7754
Access Cover

661607754
15008463: RNCC: 3 | RNVC: 2

5 Dec 2012

5340-66-044-7341
Angle Bracket

5340-66-156-0469
Mounting Bracket

661560469
ARLM0703--1: RNCC: 3 | RNVC: 2

8 Aug 2007

5340-66-145-2525
Double Angle Bracket

661452525
M-56263: RNCC: 3 | RNVC: 2

26 Aug 1999

5340-66-154-3276
Access Cover

661543276
471-RH000-009-TO2: RNCC: 3 | RNVC: 2
471-RH000-009-TO2: RNCC: 5 | RNVC: 2

26 Apr 2006

5340-66-145-4779
Desk Top Plate

661454779
608/2/57759/000: RNCC: 3 | RNVC: 2

24 Sep 1999

5340-66-150-0220
Rigid Caster

661500220
NO PRIMARY REF 66-150-0220: RNCC: 3 | RNVC: 2
04227168: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-080-8867
Manual Control Lever

660808867
19A7700: RNCC: 3 | RNVC: 2

26 Sep 1974

5340-66-040-7476
Retaining Clip

660407476
0180902: RNCC: 3 | RNVC: 2

7 Jun 1971

5340-66-160-4628
Mounting Bracket

661604628
NALM00825-1: RNCC: 3 | RNVC: 2

6 Aug 2012

5340-66-147-7630
Access Cover

661477630
6671388-1: RNCC: 3 | RNVC: 2
6671388-1: RNCC: C | RNVC: 1

13 Aug 2001

5340-66-158-7263
Bracket Lifting

661587263
M210-M405-H-027: RNCC: 3 | RNVC: 2

1 Jul 2010

5340-66-143-8979
Mounting Plate

661438979
DE250530267: RNCC: 3 | RNVC: 2

26 Aug 1997

5340-66-151-4733
Angle Bracket

661514733
115.50.07.389: RNCC: 3 | RNVC: 2

27 Nov 2003

5340-66-158-6834
Mounting Bracket

661586834
RAY184025-1: RNCC: 3 | RNVC: 2
RAY184025-1: RNCC: 5 | RNVC: 2

3 Jun 2010

5340-66-150-5346
Pipe Hanger

661505346
NO PRIMARY REF 66-150-5346: RNCC: 3 | RNVC: 2
01913255: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-139-1018
Mounting Bracket

661391018
640/2/30644: RNCC: 3 | RNVC: 2

4 Mar 1994

5340-66-011-2637
Plain Solid Disk

660112637
TSE(V)88-69: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-126-8774
Nonmetallic Bumper

661268774
1 151 869: RNCC: 3 | RNVC: 2

27 Aug 1986

5340-66-140-2899
Diesel Engine Cap

661402899
1357775-4: RNCC: 3 | RNVC: 2
1357775-4: RNCC: 3 | RNVC: 2

17 Feb 1995

5340-66-160-9026
Mounting Bracket

661609026
15020119: RNCC: 3 | RNVC: 2

27 Feb 2013

5340-66-148-5534
Strap And Kit Kit

661485534
90503: RNCC: 3 | RNVC: 2

12 Jul 2002

5340-66-147-3777
Mounting Bracket

661473777
0030300106: RNCC: 3 | RNVC: 2

12 Apr 2001

5340-66-160-3159
Mounting Bracket

661603159
CIB-BMT-2017-01: RNCC: 3 | RNVC: 2
CIB-BMT-2017-01: RNCC: 5 | RNVC: 2

4 Jun 2012

5340-66-144-5092
Rim Latch

661445092
10617709: RNCC: 1 | RNVC: 2
B7-10-301-10: RNCC: 3 | RNVC: 2
B7-10-301-10: RNCC: 5 | RNVC: 2

3 Dec 1998

5340-66-157-9292
Wedge Support

661579292
471-900037-101: RNCC: 3 | RNVC: 2
12666871: RNCC: 5 | RNVC: 2
471-90037-101: RNCC: 5 | RNVC: 2

19 May 2009

5340-66-115-4880
Clamping Catch

661154880
DE580040007: RNCC: 3 | RNVC: 2

10 Jan 1984

5340-66-150-0779
Expansion Shield

661500779
NO PRIMARY REF 66-150-0779: RNCC: 3 | RNVC: 2
01794700: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-102-0327
Angle Bracket

5340-66-099-8152

5340-66-151-8174
Manual Control Handle

661518174
F90-HANHDPE200: RNCC: 3 | RNVC: 2

22 Oct 2003

5340-66-159-2674
Mounting Plate

661592674
P10567-89: RNCC: 3 | RNVC: 2
P10567 ITEM 18: RNCC: 5 | RNVC: 2

10 May 2011

5340-66-133-6786
Butt Hinge

5340-66-021-2501
Dust And Moisture Seal Protective Cap

660212501
H15638B: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1
LP506-3: RNCC: C | RNVC: 1

1 Jan 1968

5340-66-072-1782
Surface Bolt

660721782
A400-6IN: RNCC: 3 | RNVC: 1

5 Jul 1974

5340-66-139-3596
Angle Bracket

661393596
DE250530133: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-66-131-6486
Cap

661316486
640/2/27518: RNCC: 3 | RNVC: 2

23 Mar 1989

5340-66-150-5056
Mounting Bracket

661505056
NO PRIMARY REF 66-150-5056: RNCC: 3 | RNVC: 2
00989118: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-152-2608
Access Cover

661522608
BMA-A05-1480-01: RNCC: 3 | RNVC: 2

25 Sep 2004

5340-66-140-5723
Webbing Strap

661405723
AS/NZS 4380:1996: RNCC: 3 | RNVC: 1
004-336-01: RNCC: 3 | RNVC: 2
BCL25-YT25: RNCC: 5 | RNVC: 2

11 Jul 1995

5340-66-160-3326
Mounting Bracket

661603326
BMP-A18-2014-01: RNCC: 3 | RNVC: 2

13 Jun 2012

5340-66-155-7919
Electronic Equipment Hardware Kit

661557919
SCES 13968: RNCC: 3 | RNVC: 2

31 May 2007

5340-66-126-8266
Bracket

661268266
DE(EMEI)85-4: RNCC: 3 | RNVC: 2

2 Jul 1986

5340-66-158-9361
Mounting Plate

661589361
S70A53HSD011-1: RNCC: 3 | RNVC: 2

28 Oct 2010

5340-66-142-6736
Mounting Bracket

661426736
DSA-10-389-5: RNCC: 3 | RNVC: 2
DSA-10-389-5: RNCC: 3 | RNVC: 2

23 Jan 1997

5340-66-145-5205
Capsule

661455205
SP2734A: RNCC: 3 | RNVC: 2

15 Oct 1999

5340-66-059-8162
Door Handle Set

660598162
2445: RNCC: 3 | RNVC: 2
222: RNCC: 3 | RNVC: 2

22 Jun 1973

5340-66-026-5356
Snap Hook

5340-66-152-7073
Rim Latch

661527073
MH-A600-0002-08 ITEM3: RNCC: 3 | RNVC: 2
MH-A600-0002 SHT8 ITEM 3: RNCC: 5 | RNVC: 2

25 Feb 2005

5340-66-154-1910
Mechanicl Seal Cover

661541910
S0E56A1E1822/521: RNCC: 3 | RNVC: 2

21 Mar 2006

5340-66-123-6714
Webbing Strap

661236714
TF00123-1: RNCC: 3 | RNVC: 2

3 Jun 1998

5340-66-099-7668
Access Cover

660997668
DE230010019: RNCC: 3 | RNVC: 2

8 Jul 1979

5340-66-158-1565
Bow Handle

661581565
P10366-15-01-02: RNCC: 3 | RNVC: 2

7 Sep 2009

5340-66-155-1615
Cover Tube

661551615
275Z-0238: RNCC: 3 | RNVC: 2

19 Dec 2006

5340-66-160-7999
Mounting Plate

661607999
ID26-003: RNCC: 3 | RNVC: 2

17 Dec 2012

5340-66-129-7943
Angle Bracket

661297943
DA73266004: RNCC: 3 | RNVC: 2

18 Sep 2000

5340-66-014-5016
Rigid Caster

660145016
L3501: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-66-143-8126
Turnbuckle

661438126
3023.913: RNCC: 3 | RNVC: 2

7 Aug 1997

5340-66-142-6392
Retaining Strap

661426392
79008: RNCC: 3 | RNVC: 2

14 Dec 1996

5340-66-098-6003

5340-66-139-2888
Turnbuckle

661392888
SCES12151: RNCC: 3 | RNVC: 1
323213: RNCC: 5 | RNVC: 2

9 Aug 1994

5340-66-130-2920
Angle Bracket

5340-66-161-2979
Access Cover

661612979
3040N163-001: RNCC: 3 | RNVC: 2

27 Aug 2013

5340-66-043-7353
Angle Bracket

660437353
KA29024L235: RNCC: 3 | RNVC: 2

18 Aug 1971

5340-66-160-6597
Mounting Bracket

661606597
JYG0831: RNCC: 3 | RNVC: 2

5 Oct 2012

5340-66-160-7015
Crank Handle

661607015
HAN6: RNCC: 3 | RNVC: 2
121290: RNCC: 5 | RNVC: 2

26 Oct 2012

5340-66-154-1408
Butt Hinge

661541408
7889: RNCC: 3 | RNVC: 2

3 Mar 2006

5340-66-154-8561
Blank Panel

661548561
15010478-17: RNCC: 3 | RNVC: 2

20 Sep 2006

5340-66-159-4251
Access Cover

661594251
BMU-A05-3009B01: RNCC: 3 | RNVC: 2

11 Jul 2011

5340-66-157-8553
Mounting Bracket

661578553
471-90243-104: RNCC: 3 | RNVC: 2

22 Apr 2009

5340-66-147-3972
Panel Moulding Trim

661473972
0545347002: RNCC: 3 | RNVC: 2

23 Apr 2001

5340-66-148-9959
Plate Carrier Rail

661489959
110 70810: RNCC: 3 | RNVC: 2
110 70810: RNCC: 5 | RNVC: 2

28 Aug 2002

5340-66-130-7146
Webbing Strap

661307146
RANMME1881-2200MM: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

4 Jun 1988

5340-66-143-4296
Door Subframe

661434296
492463: RNCC: 3 | RNVC: 2

24 Apr 1998

5340-66-021-5797
Angle Bracket

660215797
162458R1: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-148-8826
Mounting Bracket

661488826
C06510: RNCC: 3 | RNVC: 2

12 Nov 2002

5340-66-015-8289
Retaining Strap

5340-66-151-2298
Retainer

661512298
JMS2002-57-1HL: RNCC: 3 | RNVC: 2

15 Oct 2003

5340-66-157-0864
Mounting Bracket

661570864
1728-BH-0917-01: RNCC: 3 | RNVC: 2

21 Jul 2008

5340-66-018-7875
Padlock Key

660187875
234BKEYT531: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-150-2464
Hasp Staple

661502464
NO PRIMARY REF 66-150-2464: RNCC: 3 | RNVC: 2
04060703: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-153-2771
Mounting Bracket

661532771
A210 0243: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-156-8865
Webbing Strap

661568865
B10128-139: RNCC: 3 | RNVC: 2

21 May 2008

5340-66-155-9843
Angle Bracket

661559843
471-40226-905: RNCC: 3 | RNVC: 2
522559: RNCC: 5 | RNVC: 2

18 Jul 2007

5340-66-141-4942
Access Cover

661414942
004-243: RNCC: 3 | RNVC: 2

23 Apr 1996

5340-66-021-3144
Spring Tension Clip

660213144
22106 9/16 IN.: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-160-7044
General Purpose Resilient Mount

661607044
P471-90200-101T35: RNCC: 3 | RNVC: 2
P471-90200-101T35: RNCC: 5 | RNVC: 2

30 Oct 2012

5340-66-093-2931
Angle Bracket

5340-66-149-5708

5340-66-159-2287
Lifting Sling Sleeve

661592287
03483443: RNCC: 3 | RNVC: 2
E1000/02 EWL: RNCC: 5 | RNVC: 2
03483443: RNCC: 5 | RNVC: 2

14 Apr 2011

5340-66-160-4510
Retaining Strap

661604510
A97-DWG-000016-01: RNCC: 3 | RNVC: 2

31 Jul 2012

5340-66-160-3217
Mounting Bracket

661603217
NALM00814-1: RNCC: 3 | RNVC: 2
NALM00824-1: RNCC: 5 | RNVC: 2

6 Jun 2012

5340-66-160-7366
Mounting Plate

661607366
15019104: RNCC: 3 | RNVC: 2

21 Nov 2012

5340-66-096-4468
General Purpose Resilient Mount

660964468
DE230020177: RNCC: 3 | RNVC: 2
E2200/S1: RNCC: 3 | RNVC: 2

27 Sep 1979

5340-66-147-2403
Base Frame Assembly

661472403
000/200/GMOWS.3030.01: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-66-107-3291
Connecting Link

661073291
01D447-5: RNCC: 3 | RNVC: 2

18 Jul 1980

5340-66-164-8287

5340-66-128-4755
Spring Tension Clip

661284755
AFU1217: RNCC: 3 | RNVC: 2

9 Dec 1987

5340-66-157-3628
Access Cover

661573628
BMU-A05-3009-01: RNCC: 3 | RNVC: 2
BMU-A05-3009-01: RNCC: 5 | RNVC: 2

22 Oct 2008

5340-66-160-3721
Mounting Plate

661603721
47-20002: RNCC: 3 | RNVC: 2

26 Jun 2012

5340-66-139-3614
Mounting Bracket

661393614
675/2/35891/000: RNCC: 3 | RNVC: 2

28 Sep 1994

5340-66-098-2476
Expansion Shield

660982476
NAC44: RNCC: 3 | RNVC: 2

22 Aug 1978

5340-66-157-8000
Dust And Moisture Seal Protective Plug Set

661578000
430: RNCC: 3 | RNVC: 2

30 Mar 2009

5340-66-141-1964
Mounting Bracket

661411964
352101: RNCC: 3 | RNVC: 2
352101: RNCC: 3 | RNVC: 2
352101: RNCC: 3 | RNVC: 2

16 Oct 1995

5340-66-030-5078
Dirt And Liquid Deflector

660305078
83391R91: RNCC: 3 | RNVC: 2

2 Nov 1968

5340-66-144-7273
Handwheel

661447273
MHC1221-1: RNCC: 3 | RNVC: 2

14 Jan 1999

5340-66-086-0152
Angle Bracket

660860152
104-605: RNCC: 3 | RNVC: 2

2 Jun 1975

5340-66-158-9254
Mounting Bracket

661589254
92818: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-66-108-8643
Dust And Moist Boot

5340-66-109-3005
Mounting Bracket

5340-66-068-0999
Runner

5340-66-090-1170
Angle Bracket

5340-66-090-1095
Retaining Clip

5340-66-143-0980
Door Hook And Eye

661430980
S0277/1: RNCC: 3 | RNVC: 2

5 May 1997

5340-66-155-6725
Mounting Plate

661556725
146753-4: RNCC: 3 | RNVC: 2

7 May 2007

5340-66-150-5146
First Aid Kit

661505146
NO PRIMARY REF 66-150-5146: RNCC: 3 | RNVC: 2
02040156: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-156-3528
Loop Clamp

661563528
471-90000-121T05: RNCC: 3 | RNVC: 2
502350: RNCC: 5 | RNVC: 2

5 Nov 2007

5340-66-144-9856
Clamping Catch

661449856
K5-2811-07: RNCC: 3 | RNVC: 2

21 Jun 1999

5340-66-139-2951
Spacing Threaded Standoff

661392951
999/4/35693/204: RNCC: 3 | RNVC: 2

11 Oct 1994

5340-66-087-9144
Tee Hinge

660879144
HINGETEE: RNCC: 3 | RNVC: 1

22 May 1971

5340-66-144-2488
Dust And Moisture Seal Protective Plug

661442488
80/T42: RNCC: 3 | RNVC: 2

19 Aug 1998

5340-66-021-5805
Retaining Clip

660215805
187821R1: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-133-6647
Mounting Bracket

661336647
DE580180742: RNCC: 3 | RNVC: 2

5 Mar 1990

5340-66-147-2568
Strainer Basket

661472568
DAF285S: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-66-157-7466
Mounting Bracket

661577466
MV5-05-0003/57: RNCC: 3 | RNVC: 2

6 Mar 2009

5340-66-146-4661
Mounting Plate

661464661
73009-3-51: RNCC: 3 | RNVC: 2
73009-3-51: RNCC: 5 | RNVC: 2

17 May 2000

5340-66-160-3908
Mechanic Equipment Hardware Kit

661603908
TR-06-3-008: RNCC: 3 | RNVC: 2

6 Jul 2012

5340-66-146-3521
Battery Clamping Ro

661463521
240518A: RNCC: 3 | RNVC: 2
240518A: RNCC: 5 | RNVC: 2

13 Apr 2000

5340-66-147-5017
Spray Bars Stand

661475017
OP 2011MD: RNCC: 3 | RNVC: 2

4 Jun 2001

5340-66-146-1613
Distributor

661461613
544184 80: RNCC: 3 | RNVC: 2

4 Feb 2000

5340-66-160-7636
Mounting Plate

661607636
100006-003: RNCC: 3 | RNVC: 2

29 Nov 2012

5340-66-153-6493
Angle Bracket

661536493
TIS-003: RNCC: 3 | RNVC: 2

6 Oct 2005

5340-66-151-3470
Bow Handle

661513470
502AMR319-13: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-66-148-1995
Dust And Moisture Seal Protective Cap

661481995
FC-T: RNCC: 3 | RNVC: 2

13 Feb 2002

5340-66-145-9592
Webbing Strap

661459592
2002071TX0.8: RNCC: 3 | RNVC: 2

25 Oct 2001

5340-66-159-1555
Loop Clamp

661591555
EN4113S19WR: RNCC: 3 | RNVC: 2

15 Mar 2011

5340-66-147-2761
Back Plate

661472761
RAC114CS: RNCC: 3 | RNVC: 2

21 Dec 2000

5340-66-155-4756
Mounting Bracket

661554756
ARLM0870: RNCC: 3 | RNVC: 2

29 Mar 2007

5340-66-155-9394
Snap Hook

661559394
062-9: RNCC: 3 | RNVC: 2

4 Jul 2007

5340-66-161-1744
Mounting Bracket

661611744
15019546: RNCC: 3 | RNVC: 2

15 Jul 2013

5340-66-131-5755
Bracket

661315755
3285368R1: RNCC: 3 | RNVC: 2

7 Dec 1988

5340-66-021-2259
Barrel Bolt

660212259
333: RNCC: 3 | RNVC: 1
WELD0M705: RNCC: 3 | RNVC: 1
576: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-101-5758
Hinge

661015758
R31: RNCC: 3 | RNVC: 2

22 May 1979

5340-66-068-5253
Manual Control Lever

660685253
2-2008: RNCC: 3 | RNVC: 2

6 Mar 1974

5340-66-158-4712
Damper Casing

661584712
SODFAB01/1&2: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-66-157-3588
Mounting Bracket

661573588
1000341: RNCC: 3 | RNVC: 2

21 Oct 2008

5340-66-157-2902
Buckle

661572902
10026851: RNCC: 3 | RNVC: 2

30 Sep 2008

5340-66-149-1903
Hand Crank

661491903
004-934: RNCC: 3 | RNVC: 2

13 Mar 2003

5340-66-156-7649
General Purpose Access Door

661567649
R0002-004: RNCC: 3 | RNVC: 2

26 Mar 2008

5340-66-141-2607
General Purpose Resilient Mount

661412607
C75/36B: RNCC: 3 | RNVC: 2

10 Nov 1995

5340-66-153-4374
General Purpose Resilient Mount

661534374
3110064: RNCC: 3 | RNVC: 2
3110064: RNCC: 5 | RNVC: 2

18 Aug 2005

5340-66-161-3402
Loop Holder

661613402
S605: RNCC: 3 | RNVC: 2

13 Sep 2013

5340-66-158-2998
Access Cover

661582998
BDI 30400-8-3: RNCC: 3 | RNVC: 2

30 Oct 2009

5340-66-129-5353
Glove Door Bracket

661295353
SR12B8250-8: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-66-154-7899
Electronic Equipment Hardware Kit

661547899
SCES13900: RNCC: 3 | RNVC: 2

6 Sep 2006

5340-66-159-1985
Synchro Clamp

661591985
BBACC100: RNCC: 3 | RNVC: 2

29 Mar 2011

5340-66-144-0760
Spacing Threaded Standoff

661440760
640/2/34340/000: RNCC: 3 | RNVC: 2

26 May 1998

5340-66-147-4726
Wired Basket Holder

661474726
1544123: RNCC: 3 | RNVC: 2
9051544123: RNCC: 3 | RNVC: 2

21 May 2001

5340-66-131-4930
Angle Bracket

661314930
BRACKET: RNCC: 3 | RNVC: 1
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

28 Oct 1988

5340-66-155-9186
Angle Bracket

661559186
X30RU33: RNCC: 3 | RNVC: 2

28 Jun 2007

5340-66-152-4154
General Purpose Resilient Mount

661524154
M11460: RNCC: 3 | RNVC: 2
09019500: RNCC: 5 | RNVC: 2

17 Nov 2004

5340-66-158-3695
Dust And Moisture Seal Protective Cover

661583695
79786335: RNCC: 3 | RNVC: 2

30 Nov 2009

5340-66-154-8610
Angle Bracket

661548610
15007843: RNCC: 3 | RNVC: 2

20 Sep 2006

5340-66-138-9641
Nonmetallic Bumper

661389641
4255201841: RNCC: 3 | RNVC: 2
0004255201841: RNCC: C | RNVC: 1

2 Dec 1993

5340-66-154-5060
Nonmetallic Bumper

661545060
1143573: RNCC: 3 | RNVC: 2

19 Jun 2006

5340-66-092-4036
Buckle

660924036
389041997: RNCC: 3 | RNVC: 2

15 Nov 1976

5340-66-157-2743
Mounting Bracket

661572743
10RE29465M: RNCC: 3 | RNVC: 2

23 Sep 2008

5340-66-156-5021
Mechanic Equipment Hardware Kit

661565021
DA 013: RNCC: 3 | RNVC: 2

12 Dec 2007

5340-66-158-0150
Mounting Plate

661580150
1728-BH-0812-01: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-66-154-7981
Mounting Plate

661547981
471-60801-103: RNCC: 3 | RNVC: 2
506673: RNCC: 5 | RNVC: 2

7 Sep 2006

5340-66-145-8372
Pin

661458372
812.349.00: RNCC: 3 | RNVC: 2

1 Dec 1999

5340-66-156-4806
General Purpose Resilient Mount

661564806
10003789-40: RNCC: 3 | RNVC: 2
0323 7062: RNCC: 5 | RNVC: 2

6 Dec 2007

5340-66-158-4718
Boss Chassis

661584718
SFD2482: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-66-139-9626
Grid Closure Assy

661399626
PL5597848-0009: RNCC: 3 | RNVC: 2

10 Oct 1994

5340-66-093-1313
Safety Latch S Lock

660931313
K56RL0CK: RNCC: 3 | RNVC: 2

22 Dec 1976

5340-66-130-1145
Retaining Clip

661301145
433 028 1103 0: RNCC: 3 | RNVC: 2
433 028 1103 0: RNCC: 5 | RNVC: 2
433 028 1103 0: RNCC: 5 | RNVC: 2
43302811030: RNCC: 5 | RNVC: 2

9 Sep 1987

5340-66-139-6202
Access Cover

661396202
56W4-S104 PC46: RNCC: 3 | RNVC: 1
56W4-S104 PC46: RNCC: 3 | RNVC: 2

13 Jul 1994

5340-66-036-4177
Angle Bracket

660364177
30-53327: RNCC: 3 | RNVC: 2

22 Jul 1970

5340-66-148-9717
Manual Control Lever

661489717
1D0401500594-4: RNCC: 3 | RNVC: 2

6 Aug 2002

5340-66-038-6366
Loop Clamp

660386366
TA557S4: RNCC: 3 | RNVC: 2

12 Feb 1971

5340-66-154-7876
Slide

661547876
15004445: RNCC: 3 | RNVC: 2

6 Sep 2006

5340-66-153-9115
Dust And Moisture Seal Protective Cap

661539115
645-521: RNCC: 3 | RNVC: 2

2 Dec 2005

5340-66-060-0702
Clamping Catch

660600702
0111241: RNCC: 3 | RNVC: 2

22 Jun 1973

5340-66-058-9250
Key Blank

660589250
C4B: RNCC: 3 | RNVC: 2
KB225: RNCC: 3 | RNVC: 2

19 Aug 1973

5340-66-128-4472
Block Clamp

661284472
5154190130: RNCC: 3 | RNVC: 2
5154190130: RNCC: 5 | RNVC: 2

28 Oct 1987

5340-66-153-6457
Angle Bracket

661536457
47110411108-001: RNCC: 3 | RNVC: 2

6 Oct 2005

5340-66-160-2155
Retaining Strap

661602155
BMA-A05-1765-01: RNCC: 3 | RNVC: 2

30 Apr 2012

5340-66-146-1961
Mounting Bracket

661461961
472 7390-01: RNCC: 3 | RNVC: 2

10 Feb 2000

5340-66-029-4771
Electronic Equipment Hardware Kit

660294771
ADE(W)74-2: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-149-7142
Permanent Magnet

661497142
NO PRIMARY REF 66-149-7142: RNCC: 3 | RNVC: 2
05809617: RNCC: 5 | RNVC: 2

10 Apr 2003

5340-66-149-1778
Webbing Strap

661491778
49GA-601: RNCC: 3 | RNVC: 2

11 Nov 2002

5340-66-157-5119
Mounting Bracket

661575119
800-80194: RNCC: 3 | RNVC: 2

5 Dec 2008

5340-66-143-3229
Drain Plug Assembly

661433229
165074-05: RNCC: 3 | RNVC: 2

9 Apr 1998

5340-66-152-5623
Mounting Bracket

661525623
HRV010202001: RNCC: 3 | RNVC: 2

5 Nov 2004

5340-66-161-3091
Mounting Plate

661613091
Z9A006: RNCC: 3 | RNVC: 2

3 Sep 2013

5340-66-157-4137
Hand Crank

661574137
6GSDEFCRANK: RNCC: 3 | RNVC: 2

13 Nov 2008

5340-66-149-5757

5340-66-157-1522
Dust And Moisture Seal Protective Cap

661571522
3255406R1: RNCC: 3 | RNVC: 2
3255406R1: RNCC: 5 | RNVC: 2

18 Aug 2008

5340-66-149-5696

5340-66-146-1594
Coupling Rotex

661461594
850511: RNCC: 3 | RNVC: 2

11 Feb 2000

5340-66-149-5289

5340-66-097-7755
Support Stay

660977755
TMGB243B: RNCC: 3 | RNVC: 2

14 May 1978

5340-66-155-7535
Mounting Plate

661557535
X50RU2213M: RNCC: 3 | RNVC: 2

21 May 2007

5340-66-161-1975
Webbing Strap

661611975
BP5685482: RNCC: 3 | RNVC: 2

19 Jul 2013

5340-66-128-9071
Helical Compression Spring Seat

661289071
DE100510016: RNCC: 3 | RNVC: 2

14 Feb 1989

5340-66-117-4422
Haly Clamp Assembly

5340-66-126-7800
Handle Grip

5340-66-136-5410
Turnbuckle

661365410
SPS6000: RNCC: 3 | RNVC: 2

8 Jul 1993

5340-66-158-2479
Retaining Strap

661582479
HV29921: RNCC: 3 | RNVC: 2

12 Oct 2009

5340-66-128-6426
Clamping Catch

661286426
HYG4919: RNCC: 3 | RNVC: 2

27 Aug 1992

5340-66-150-0670
Padlock

661500670
NO PRIMARY REF 66-150-0670: RNCC: 3 | RNVC: 2
03381256: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-150-0782
Expansion Shield

661500782
NO PRIMARY REF 66-150-0782: RNCC: 3 | RNVC: 2
02392606: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-145-9589
Webbing Strap

661459589
D00704: RNCC: 3 | RNVC: 2

25 Oct 2001

5340-66-153-2624
Mounting Bracket

661532624
A210 0159: RNCC: 3 | RNVC: 2

4 Jul 2005

5340-66-130-1144
Bracket

661301144
2495: RNCC: 3 | RNVC: 2

9 Sep 1987

5340-66-129-8887
Mounting Bracket

661298887
016AMR394-4: RNCC: 3 | RNVC: 2

4 Apr 2001

5340-66-153-8121
Helical Compression Spring Seat

661538121
244972-6: RNCC: 3 | RNVC: 2
244972-6: RNCC: 5 | RNVC: 2
244972-6: RNCC: 5 | RNVC: 2

9 Nov 2005

5340-66-156-0972
Lock

661560972
90480: RNCC: 3 | RNVC: 2

24 Aug 2007

5340-66-132-5240
Rubber Block

661325240
05-708: RNCC: 3 | RNVC: 2

17 Mar 1989

5340-66-161-1518
Mounting Plate

661611518
42768P: RNCC: 3 | RNVC: 2

4 Jul 2013

5340-66-124-6873

5340-66-145-9591
Webbing Strap

661459591
2002071TX0.4: RNCC: 3 | RNVC: 2

25 Oct 2001

5340-66-157-1155
Corrosion Preventive Anode

661571155
3039251: RNCC: 3 | RNVC: 2
28-Z: RNCC: 5 | RNVC: 2

31 Jul 2008

5340-66-124-6932

5340-66-158-2541
Catch Strike

661582541
HYL9134: RNCC: 3 | RNVC: 2

13 Oct 2009

5340-66-150-0877
Locking Stay

661500877
NO PRIMARY REF 66-150-0877: RNCC: 3 | RNVC: 2
00835457: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-157-4522
Webbing Strap

661574522
468-A3-300: RNCC: 3 | RNVC: 2

25 Nov 2008

5340-66-160-0010
Mounting Bracket

661600010
MH-A612-0005-A1: RNCC: 3 | RNVC: 2

20 Mar 2012

5340-66-161-3490
Mounting Plate

661613490
AVI-100-014-007: RNCC: 3 | RNVC: 2

17 Sep 2013

5340-66-155-5021
Manual Control Handle

661555021
196630-12582: RNCC: 3 | RNVC: 2

3 Apr 2007

5340-66-144-8928
Webbing Strap

661448928
008-702-2: RNCC: 3 | RNVC: 2
GYD702/2: RNCC: 5 | RNVC: 2

23 Apr 1999

5340-66-160-7981
Mounting Bracket

661607981
ZMAP12: RNCC: 3 | RNVC: 2
ZMAP12: RNCC: 5 | RNVC: 2

17 Dec 2012

5340-66-156-4652
Angle Bracket

661564652
15016497: RNCC: 3 | RNVC: 2

3 Dec 2007

5340-66-146-6943
Fire Damper

661466943
MSD-MO-SB-300-190-250-SS: RNCC: 3 | RNVC: 2

9 Aug 2000

5340-66-148-4709
Helical Compression Spring Retainer

661484709
OED-1749-20-02-36: RNCC: 3 | RNVC: 2

6 May 2002

5340-66-094-5405
Turnbuckle

660945405
112B2-8-770B: RNCC: 3 | RNVC: 2

17 Apr 1977

5340-66-147-2491
Male Connector

661472491
005/340/GMOWS.2.02: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-66-143-1468
Dust And Moisture Seal Protective Cover

661431468
138100 16440 K 0001/24: RNCC: 3 | RNVC: 2
9051466090: RNCC: 5 | RNVC: 2

28 Jan 1998

5340-66-124-7921
Ferrule

661247921
15170-Z: RNCC: 3 | RNVC: 2

19 Nov 1985

5340-66-038-2530
Angle Bracket

5340-66-088-1815
Door Handle

660881815
1213-251211: RNCC: 3 | RNVC: 2

20 Apr 1975

5340-66-144-6415
Nonmetallic Bumper

661446415
C5191: RNCC: 3 | RNVC: 2
36-0124: RNCC: 3 | RNVC: 2
HYM1070: RNCC: 3 | RNVC: 2

12 Feb 1999

5340-66-157-0252
Mounting Bracket

661570252
DE252220031: RNCC: 3 | RNVC: 2
AS/NZS 1866/5083 OR 6060: RNCC: 5 | RNVC: 1

8 Jul 2008

5340-66-036-8718
Rope Cleat

660368718
TSE(V)54-332: RNCC: 3 | RNVC: 2

23 Sep 1970

5340-66-146-1956
Mounting Bracket

661461956
472 7353-04: RNCC: 3 | RNVC: 2

10 Feb 2000

5340-66-104-8579
Padlock Key

661048579
0145-90-911-2306: RNCC: 3 | RNVC: 2
G1GAA0003: RNCC: 5 | RNVC: 9

22 Jun 1980

5340-66-037-8795
Handwheel

660378795
STDP0302-256: RNCC: 3 | RNVC: 2

14 Jan 1971

5340-66-154-1875
Mounting Plate

661541875
S0E56A1E1822-061: RNCC: 3 | RNVC: 2

21 Mar 2006

5340-66-132-3366
Die Plate Support

661323366
TOOLING FOR 5340-66-130-7799: RNCC: 3 | RNVC: 2

21 Nov 1992

5340-66-033-3267
Swivel Caster

660333267
190: RNCC: 3 | RNVC: 2

8 Aug 1969

5340-66-145-0511
Webbing Strap

661450511
0854D02/2: RNCC: 3 | RNVC: 2
0854D02/2: RNCC: 5 | RNVC: 2

11 Jun 1999

5340-66-142-8291
Hinge

661428291
96-142: RNCC: 3 | RNVC: 2
96-142: RNCC: 5 | RNVC: 2

27 Nov 1996

5340-66-140-6143
Cable Retainer

661406143
02-0730A-04: RNCC: 3 | RNVC: 2

13 Nov 1995

5340-66-159-1948
Mounting Bracket

661591948
045787A-00: RNCC: 3 | RNVC: 2

29 Mar 2011

5340-66-149-7162
Turnbuckle

661497162
NO PRIMARY REF 66-149-7162: RNCC: 3 | RNVC: 2
04699501: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-104-1172
Retaining Strap

661041172
564-3: RNCC: 3 | RNVC: 2
01878552: RNCC: 5 | RNVC: 2

12 Feb 1971

5340-66-158-1686
Access Cover

661581686
BDI30400-8-9: RNCC: 3 | RNVC: 2

11 Sep 2009

5340-66-152-3779
Rifle Butt Bracket

661523779
DE251950013: RNCC: 3 | RNVC: 2

13 Oct 2004

5340-66-143-1463
Dust And Moisture Seal Protective Cover

661431463
R/S 1000: RNCC: 3 | RNVC: 2
138100 16440 K 0001/16: RNCC: 3 | RNVC: 2
9051354838: RNCC: 5 | RNVC: 2

28 Jan 1998

5340-66-075-4946
Hand Crank

660754946
16ST5293: RNCC: 3 | RNVC: 2

28 Jul 1974

5340-66-128-5922
Webbing Strap

661285922
2408: RNCC: 3 | RNVC: 2

16 Feb 1990

5340-66-146-9155
Explosion-Proof Hou

661469155
ZS-250: RNCC: 3 | RNVC: 2

4 Oct 2000

5340-66-156-7694
Multiple Angle Bracket

661567694
471-51631-124: RNCC: 3 | RNVC: 2
525168: RNCC: 5 | RNVC: 2

27 Mar 2008

5340-66-153-2602
Mounting Bracket

661532602
A210 0315-2: RNCC: 3 | RNVC: 2

4 Jul 2005

5340-66-088-4916
Resilient Mo Sleeve

660884916
13-26297: RNCC: 3 | RNVC: 2

1 Feb 1976

5340-66-158-1736
Retaining Band

661581736
OEM PART 1: RNCC: 3 | RNVC: 2

15 Sep 2009

5340-66-158-7861
Access Cover

661587861
236-2096: RNCC: 3 | RNVC: 2

3 Aug 2010

5340-66-157-6773
Canvas Plen Chamber

661576773
D-2654: RNCC: 3 | RNVC: 2

9 Feb 2009

5340-66-128-7947
Turnbuckle

661287947
PO1630008AC: RNCC: 3 | RNVC: 2
RFQ163002/5: RNCC: 5 | RNVC: 2

30 Sep 1993

5340-66-156-8047
Mounting Plate

661568047
DE102160002-1: RNCC: 3 | RNVC: 2

18 Apr 2008

5340-66-143-3098
Pa Supporting Frame

661433098
1 180 201: RNCC: 3 | RNVC: 2
1 180 164: RNCC: 5 | RNVC: 2

1 Apr 1998

5340-66-143-4999
6-Hole Windlock

661434999
1205-784-1: RNCC: 3 | RNVC: 2

19 May 1998

5340-66-147-0678
Loop Clamp

661470678
95B9223-1: RNCC: 3 | RNVC: 2

15 Dec 2000

5340-66-156-9705
Mounting Plate

661569705
D-2522: RNCC: 3 | RNVC: 2

24 Jun 2008

5340-66-142-4635
Mounting Bracket

661424635
471-90423-103T12: RNCC: 3 | RNVC: 2
521573: RNCC: 3 | RNVC: 2

20 Aug 1996

5340-66-161-2751
Access Cover

661612751
D4968-A268: RNCC: 3 | RNVC: 2

19 Aug 2013

5340-66-066-4214
Loop Clamp

660664214
171039K: RNCC: 3 | RNVC: 2

7 Feb 1974

5340-66-146-4094
Lacing Anchor

661464094
LACING ANCHOR, 12 GAUGE X 2.5IN.: RNCC: C | RNVC: 1

9 May 2000

5340-66-093-5983
Rod End Connector

660935983
927377-1: RNCC: 3 | RNVC: 2

5 May 1977

5340-66-147-4491
Angle Bracket

661474491
CX25-1-M29-0: RNCC: 3 | RNVC: 2

7 May 2001

5340-66-116-0700
Mounting Bracket

661160700
J201426-1: RNCC: 3 | RNVC: 2

8 Aug 1983

5340-66-068-7607
Plain Solid Disk

660687607
J1937-2: RNCC: 3 | RNVC: 2

29 Mar 1974

5340-66-152-1465
Webbing Strap

661521465
434094C: RNCC: 3 | RNVC: 2

14 Jul 2004

5340-66-154-0801
Mounting Bracket

661540801
3581039-9: RNCC: 3 | RNVC: 2

17 Feb 2006

5340-66-143-6549
Dust And Moisture Seal Protective Plug

661436549
510.41.01: RNCC: 3 | RNVC: 2

10 Oct 1997

5340-66-141-4929
Mounting Bracket

661414929
004-143: RNCC: 3 | RNVC: 2

13 Apr 1996

5340-66-155-3283
Loop Clamp

661553283
DE252220001 SH2: RNCC: 3 | RNVC: 2

5 Mar 2007

5340-66-158-6761
Mounting Plate

661586761
RAY184017-1: RNCC: 3 | RNVC: 2
RAY184017-1: RNCC: 5 | RNVC: 2

1 Jun 2010

5340-66-148-5525
Cistern L Clamp Kit

661485525
90487: RNCC: 3 | RNVC: 2

12 Jul 2002

5340-66-153-2893
Mounting Bracket

661532893
A210 0331: RNCC: 3 | RNVC: 2

6 Jul 2005

5340-66-154-7416
Webbing Strap

661547416
10006014-025: RNCC: 3 | RNVC: 2
10006014-025: RNCC: 5 | RNVC: 2

28 Aug 2006

Load More Results