What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is a Hasp Staple?

A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

Hardware, Commercial - Australia (AU)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Australia (AU) - NCB is 66

Page 19 of 29

NSN Format for Hardware, Commercial
Codified by Australia

53	40	66	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Australia (AU)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 53 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 78 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 109 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 25 Items
Holder,Spring 26 Items
What is a Compression Cup? 11 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 43 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 85 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 54 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 27 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 249 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 36 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 87 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 39 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 11 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 16 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 15 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Rim Latch? 18 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Rim Lock? 13 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 12 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 17 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 17 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 18 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 103 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 11 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 59 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 14 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 14 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Plug Button? 12 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Corrosion Preventive Anode? 27 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 78 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 268 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 88 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 70 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 36 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 40 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 41 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Plain Solid Disk? 41 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 12 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 608 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 57 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 54 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 317 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 48 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 40 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 83 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Quick Release Plunger? 17 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 65 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 24 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 14 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 22 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 49 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 19 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 151 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 15 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 444 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 128 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 42 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 53 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 25 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 201 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 33 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 133 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 42 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 54 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Strapping? 28 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 75 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Screw Thread Insert And Tool Assortment? 18 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 28 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 18 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 740 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 11 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 14 Items
What is an Antipilferage Seal? 27 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 129 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Seal Retaining Plate? 29 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 47 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1862 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 15 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 11 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 10 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 766 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 27 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 65 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 79 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 71 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 22 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 12 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 14 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 35 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 50 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 28 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 15 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 20 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 11 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 83 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 138 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 393 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 38 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 11 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 22 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
What is a Key Blank? 22 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 10 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 114 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 11 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 20 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 12 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is a Bumper? 74 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 19 of 29

5340-66-078-4834
Support Ring

660784834
N36299-2: RNCC: 3 | RNVC: 2

14 Aug 1974

5340-66-100-6104
Shelf Bracket

5340-66-140-6776
Mounting Bracket

661406776
YA4356120053: RNCC: 3 | RNVC: 2

12 Jul 1995

5340-66-147-2748
Fitting

661472748
DZR245: RNCC: 3 | RNVC: 2

21 Dec 2000

5340-66-158-4783
Mounting Plate

661584783
02121-020003: RNCC: 3 | RNVC: 2

11 Feb 2010

5340-66-149-7046
Padlock

661497046
NO PRIMARY REF 66-149-7046: RNCC: 3 | RNVC: 2
3380848: RNCC: 5 | RNVC: 2

8 Apr 2003

5340-66-141-5094
Handle

661415094
0.050.453.9: RNCC: 3 | RNVC: 2

19 Jul 1996

5340-66-153-2650
Mounting Bracket

661532650
A210 0284-2: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-143-6054
T Bracket

661436054
III(01)(PORT FWD): RNCC: 3 | RNVC: 2

7 Oct 1997

5340-66-143-3106
Angle Bracket

661433106
6 418 781: RNCC: 3 | RNVC: 2
6 418 781: RNCC: 5 | RNVC: 2

1 Apr 1998

5340-66-144-1090
General Purpose Access Door

661441090
BF007TDS: RNCC: 3 | RNVC: 2

23 Jun 1998

5340-66-158-5470
General Purpose Resilient Mount

661585470
9090-1000: RNCC: 3 | RNVC: 2
9090-1000: RNCC: 5 | RNVC: 2
9090-1000: RNCC: 5 | RNVC: 2

19 Mar 2010

5340-66-128-4769
Manual Control Lever

661284769
450-613: RNCC: 3 | RNVC: 2
HYL8678: RNCC: 5 | RNVC: 2

4 Dec 1987

5340-66-125-8533
Plug

661258533
998 3686: RNCC: 3 | RNVC: 2

4 Jun 1990

5340-66-159-4080
Bolt And Spacer Kit

661594080
AE-PARTS PACK-MIL: RNCC: 3 | RNVC: 2
AE-PARTS PACK-MIL: RNCC: 3 | RNVC: 2

23 Jun 2011

5340-66-088-4953
Snap Hook

660884953
FG207: RNCC: 3 | RNVC: 2

1 Feb 1976

5340-66-088-1819
Butt Hinge

660881819
1213-251233: RNCC: 3 | RNVC: 2

20 Apr 1975

5340-66-157-4235
Dust And Moisture Seal Protective Cap

661574235
CP230: RNCC: 3 | RNVC: 2
15017471: RNCC: 5 | RNVC: 2

18 Nov 2008

5340-66-157-2417
Mounting Plate

661572417
DE253020004-4: RNCC: 3 | RNVC: 2

12 Sep 2008

5340-66-156-9335
Mounting Bracket

661569335
828096: RNCC: 3 | RNVC: 2

11 Jun 2008

5340-66-161-1628
Cushioning Pad

661611628
15007751: RNCC: 3 | RNVC: 2

9 Jul 2013

5340-66-106-0412
Mounting Plate

661060412
DE230010356: RNCC: 3 | RNVC: 1

11 Oct 1983

5340-66-146-0901
Hood

661460901
471 2416-83: RNCC: 3 | RNVC: 2

14 Jan 2000

5340-66-158-8178
Mounting Plate

661588178
P0006653: RNCC: 3 | RNVC: 2

12 Aug 2010

5340-66-153-6465
Angle Bracket

661536465
47110611121-103: RNCC: 3 | RNVC: 2

6 Oct 2005

5340-66-139-0071
Angle Bracket

661390071
BYG2145: RNCC: 3 | RNVC: 2

20 Jan 1994

5340-66-145-6318
Mounting Bracket

661456318
242799-100: RNCC: 3 | RNVC: 2

16 Nov 1999

5340-66-123-5603
Retaining Clip

661235603
SR00039: RNCC: 3 | RNVC: 2
SR00039: RNCC: 5 | RNVC: 2

18 May 1998

5340-66-129-8583
Mounting Bracket

661298583
553.10.09.391: RNCC: 3 | RNVC: 2

3 Apr 2002

5340-66-034-3863
Loop Clamp

660343863
3IN: RNCC: 3 | RNVC: 2

7 Feb 1960

5340-66-130-3293
Bridge Clamp

661303293
3855410340: RNCC: 3 | RNVC: 2

23 Feb 1988

5340-66-141-3478
Lever Assembly Flap

661413478
527.50.09.012: RNCC: 3 | RNVC: 2

8 Jun 1995

5340-66-027-6418
Spring Tension Clip

5340-66-018-0312

5340-66-144-7266
Rod End Clevis

661447266
MHC1127-1: RNCC: 3 | RNVC: 2

12 Jan 1999

5340-66-154-9450
Protective Padding

661549450
1 217 577: RNCC: 3 | RNVC: 2

17 Oct 2006

5340-66-139-4465
Electronic Equipment Hardware Kit

661394465
DE530020003: RNCC: 3 | RNVC: 2
MX-F219: RNCC: 3 | RNVC: 2

24 Jan 1995

5340-66-144-0413
Webbing Strap

661440413
1323301: RNCC: 3 | RNVC: 2

23 Feb 1998

5340-66-085-5159
Padlock

660855159
245A: RNCC: 3 | RNVC: 2
04074207: RNCC: 5 | RNVC: 2

30 Jan 1977

5340-66-158-2716
Mounting Bracket

661582716
BYG2084: RNCC: 3 | RNVC: 2

20 Oct 2009

5340-66-128-4467
Blanking Plate

661284467
AYG2874: RNCC: 3 | RNVC: 2

9 Nov 1987

5340-66-158-2248
Mounting Bracket

661582248
K11477-401: RNCC: 3 | RNVC: 2

5 Oct 2009

5340-66-082-6398
Strap Hinge Leaf

660826398
FWV10404: RNCC: 3 | RNVC: 2

29 Nov 1974

5340-66-126-8775
Nonmetallic Bumper

661268775
1 151 870: RNCC: 3 | RNVC: 2

27 Aug 1986

5340-66-123-0862
Detent Plunger

661230862
9232 1300 40: RNCC: 3 | RNVC: 2

21 Aug 1985

5340-66-107-9806
Mounting Bracket

661079806
DA84076000: RNCC: 3 | RNVC: 2

2 Aug 1985

5340-66-142-6900
Locking Stay

661426900
2887871-1: RNCC: 3 | RNVC: 2

13 Feb 1997

5340-66-022-0044
Threaded Rod End

660220044
FOM1088273-1: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-128-8174
Mounting Bracket

661288174
0751-28-001-2565: RNCC: 3 | RNVC: 2
071432: RNCC: 5 | RNVC: 2

22 Oct 1993

5340-66-122-8794
General Purpose Access Door

661228794
DE580020053: RNCC: 3 | RNVC: 2

4 Jun 1985

5340-66-144-6481
Receptacle

661446481
HYM940: RNCC: 3 | RNVC: 2
0666/002: RNCC: 5 | RNVC: 2

12 Feb 1999

5340-66-072-4069
Mounting Plate

660724069
YSAUD: RNCC: 3 | RNVC: 1

14 Apr 1971

5340-66-101-7385
Retaining Strap

661017385
564-00: RNCC: 3 | RNVC: 2
02912863: RNCC: 5 | RNVC: 2

8 Aug 1979

5340-66-152-1401
Mounting Bracket

661521401
BMA-A10-0091-01: RNCC: 3 | RNVC: 2

10 Jul 2004

5340-66-158-2814
Access Cover

661582814
BDI 30400-8-8: RNCC: 3 | RNVC: 2

23 Oct 2009

5340-66-136-4676
Dust And Moisture Seal Protective Cap

661364676
CES17673ITEM19: RNCC: 3 | RNVC: 2
DUSTCAP,FEMALE100MM PT.NO B: RNCC: 5 | RNVC: 2

22 Mar 1993

5340-66-154-6490
Helical Compression Spring Seat

661546490
6-020-3014: RNCC: 3 | RNVC: 2

2 Aug 2006

5340-66-143-9065
Webbing Strap

661439065
DPD/4010/2033: RNCC: 3 | RNVC: 1

4 Sep 1997

5340-66-031-0897
Clamp

660310897
9463105707: RNCC: 3 | RNVC: 2

17 Dec 1968

5340-66-152-3743
Mounting Bracket

661523743
15002054: RNCC: 3 | RNVC: 2

26 Oct 2004

5340-66-157-3063
Angle Bracket

661573063
2386-45170-00: RNCC: 3 | RNVC: 2

3 Oct 2008

5340-66-153-9925
Track Stop

661539925
BMA-A07-0092-01: RNCC: 3 | RNVC: 2

13 Jan 2006

5340-66-150-2045
Support Hook

661502045
NO PRIMARY REF 66-150-2045: RNCC: 3 | RNVC: 2
07212710: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-125-7704
Handle

661257704
8644451-01: RNCC: 3 | RNVC: 2

4 Jun 1992

5340-66-145-1409
T Bracket

661451409
547618: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-66-139-4974
Slide Track

661394974
004-006-1: RNCC: 3 | RNVC: 2

23 Oct 1995

5340-66-100-3112
General Purpose Access Door

661003112
QB37567: RNCC: 3 | RNVC: 2

26 Jan 1979

5340-66-160-3245
Mechanical Stop

661603245
BP5685111: RNCC: 3 | RNVC: 2

7 Jun 2012

5340-66-156-1943
Dust And Moisture Seal Protective Cover

661561943
185-3449: RNCC: 3 | RNVC: 2
15012560: RNCC: 5 | RNVC: 2

20 Sep 2007

5340-66-147-3234
Mounting Bracket

661473234
201-900-020: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-66-154-3323
Webbing Strap

661543323
1650221: RNCC: 3 | RNVC: 2

27 Apr 2006

5340-66-124-8503
Angle Bracket

661248503
EX2003449: RNCC: 3 | RNVC: 2

2 Jan 1986

5340-66-154-2356
Blank Panel

661542356
022AMR63-10: RNCC: 3 | RNVC: 2

3 Apr 2006

5340-66-139-0360
Hood Hinge Bracket

661390360
X50QM242: RNCC: 3 | RNVC: 2
X50 QM242: RNCC: 3 | RNVC: 2
0050-00-005-0242: RNCC: C | RNVC: 1

31 Jan 1994

5340-66-142-3960
General Purpose Resilient Mount

661423960
P471-90200-101T09: RNCC: 3 | RNVC: 2

12 Jul 1996

5340-66-150-3940
Butt Hinge

661503940
NO PRIMARY REF 66-150-3940: RNCC: 3 | RNVC: 2
04729413: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-128-5983
Synchro Clamp

661285983
HYG4268: RNCC: 3 | RNVC: 2

8 Oct 1990

5340-66-148-2462
Mounting Bracket

661482462
437 551 24 40: RNCC: 3 | RNVC: 2

12 Apr 2002

5340-66-098-2479
Expansion Shield

660982479
NAR46: RNCC: 3 | RNVC: 2

22 Aug 1978

5340-66-053-5802
Dust And Moisture Seal Protective Cap

660535802
D81800: RNCC: 3 | RNVC: 2
D81814: RNCC: C | RNVC: 1
6800193-188: RNCC: C | RNVC: 1

24 Nov 1972

5340-66-139-1701
Nonmetallic Bumper

661391701
X70RH27: RNCC: 3 | RNVC: 2

19 May 1994

5340-66-131-6327
Loop Clamp

661316327
445138C1: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-66-152-1394
General Purpose Access Door

661521394
BMA-A05-0822: RNCC: 3 | RNVC: 2

10 Jul 2004

5340-66-154-0312
Manipulator Cover

661540312
101123: RNCC: 3 | RNVC: 2

31 Jan 2006

5340-66-155-2839
Metal Grille

661552839
17085-01: RNCC: 3 | RNVC: 2

14 Feb 2007

5340-66-157-9157
Access Cover

661579157
501 89 44-02: RNCC: 3 | RNVC: 2
501 89 44-02: RNCC: 5 | RNVC: 2

15 May 2009

5340-66-160-8529
Mounting Bracket

661608529
1400-02-0302W2: RNCC: 3 | RNVC: 2

7 Feb 2013

5340-66-147-7416
Loop Clamp

661477416
OED-1749-9-06: RNCC: 3 | RNVC: 2

27 Jul 2001

5340-66-117-3749
Rod End Connector

661173749
DE250150006-2: RNCC: 3 | RNVC: 2

14 Feb 1984

5340-66-043-2353
Snap Hook

660432353
3028AFC: RNCC: 3 | RNVC: 2

23 Aug 1971

5340-66-088-7049
Spacing Threaded Standoff

660887049
ADE(W)67-1354-2 ISSUE 1: RNCC: 3 | RNVC: 2

27 Jun 1975

5340-66-151-6304
Manual Control Handle

661516304
NO PRIMARY REF 66-151-6304: RNCC: 3 | RNVC: 2
EO11532G: RNCC: 5 | RNVC: 2

28 Aug 2003

5340-66-155-9279
Mounting Bracket

661559279
471-50809-209: RNCC: 3 | RNVC: 2
502644: RNCC: 5 | RNVC: 2

2 Jul 2007

5340-66-156-0171
Spring Tension Clip

661560171
TG-QF CLP: RNCC: 3 | RNVC: 2

24 Jul 2007

5340-66-146-3477
General Purpose Access Door

661463477
240127A: RNCC: 3 | RNVC: 2
240127A: RNCC: 3 | RNVC: 2

10 Apr 2000

5340-66-136-3933
Mounting Plate

661363933
NR2290: RNCC: 3 | RNVC: 2

24 Oct 1992

5340-66-138-9646
Access Cover

5340-66-133-6785
Butt Hinge

5340-66-151-8526

5340-66-048-4425
Dust And Moisture Seal Protective Cap

660484425
7257-103: RNCC: 3 | RNVC: 2

27 Apr 1972

5340-66-126-2339
Lock-Release Lever

661262339
6R3-42815-00-EK: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-66-160-3592
Mechanic Equipment Hardware Kit

661603592
1479821: RNCC: 3 | RNVC: 2

25 Jun 2012

5340-66-161-1964
Buckle

661611964
BP5685817: RNCC: 3 | RNVC: 2

19 Jul 2013

5340-66-140-5842
General Purpose Access Door

661405842
004-366: RNCC: 3 | RNVC: 2

9 Nov 1995

5340-66-143-4241
Roller

661434241
492424: RNCC: 3 | RNVC: 2

24 Apr 1998

5340-66-161-2757
Access Cover

661612757
D4968-A534: RNCC: 3 | RNVC: 2

19 Aug 2013

5340-66-161-1666
Mounting Bracket

661611666
ID25-102: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-66-150-8157
Dust And Moisture Seal Protective Cap

661508157
MS0021: RNCC: 3 | RNVC: 2

6 Aug 2003

5340-66-118-7143
Toggle Lever Catch

661187143
052-054: RNCC: 3 | RNVC: 2

28 Apr 1984

5340-66-135-5036
Manual Control Handle

661355036
529.20.09.041: RNCC: 3 | RNVC: 2

16 Dec 1992

5340-66-128-5609
Engine Lif Bracket

661285609
8943195580: RNCC: 3 | RNVC: 2
8943195580: RNCC: 5 | RNVC: 2

4 Aug 1989

5340-66-126-2360
Cowling Apron

661262360
6R3-42741-00-EK: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-66-156-9002
Access Cover

661569002
471-40020-201: RNCC: 3 | RNVC: 2
512193: RNCC: 5 | RNVC: 2

27 May 2008

5340-66-155-2376
Access Cover

661552376
DI-0009-MI: RNCC: 3 | RNVC: 2

2 Feb 2007

5340-66-142-6409
Skid Resilient Base

661426409
BASE SKID: RNCC: 3 | RNVC: 2

14 Dec 1996

5340-66-029-4099
Dust And Moisture Seal Boot

660294099
P368: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-160-7512
Mounting Bracket

661607512
15010948: RNCC: 3 | RNVC: 2

26 Nov 2012

5340-66-120-8611
Dust And Moisture Seal Protective Cap

661208611
HIFCO 1015: RNCC: 3 | RNVC: 2

8 May 1984

5340-66-161-2834
Angle Bracket

661612834
15018178: RNCC: 3 | RNVC: 2

21 Aug 2013

5340-66-149-7167
Turnbuckle

661497167
NO PRIMARY REF 66-149-7167: RNCC: 3 | RNVC: 2
00484806: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-145-9672
Access Cover

661459672
0386Z0014: RNCC: 3 | RNVC: 2

8 Nov 2001

5340-66-144-9450
Mounting Bracket

661449450
900332: RNCC: 3 | RNVC: 2

25 Jun 1999

5340-66-108-4603
Luggage Lock Set

661084603
5340-2213: RNCC: 2 | RNVC: 2

16 Apr 1981

5340-66-116-5531
Retaining Strap

661165531
174GM: RNCC: 3 | RNVC: 2
174GMX: RNCC: 3 | RNVC: 2
01913556: RNCC: 5 | RNVC: 2
0358 1102: RNCC: 5 | RNVC: 2

6 Oct 1983

5340-66-153-2966
Latch Bar

661532966
DE100450004: RNCC: 3 | RNVC: 2

7 Jul 2005

5340-66-155-4071
Retaining Clip

661554071
07283-35150: RNCC: 3 | RNVC: 2
07283-35150: RNCC: 5 | RNVC: 2

22 Mar 2007

5340-66-158-7160
Access Cover

661587160
2004-0090: RNCC: 3 | RNVC: 2

24 Jun 2010

5340-66-028-9033
Spring

660289033
AW1427: RNCC: 3 | RNVC: 2
3552-27: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-66-160-9787
Mounting Plate

661609787
521.20.09.115: RNCC: 3 | RNVC: 2

3 Apr 2013

5340-66-143-4247
Mounting Bracket

661434247
492431: RNCC: 3 | RNVC: 2

24 Apr 1998

5340-66-145-2373
Rivet

661452373
10331: RNCC: 3 | RNVC: 2

25 Aug 1999

5340-66-143-3608
Cover

661433608
142125: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-66-140-4062
Handwheel

661404062
FE85082C125X11: RNCC: 3 | RNVC: 2

27 Mar 1995

5340-66-122-6783
Loop Clamp

661226783
83AX 631: RNCC: 3 | RNVC: 2
83AX631: RNCC: 3 | RNVC: 2

16 Oct 1984

5340-66-135-3567
Block Clamp

661353567
529.20.09.094: RNCC: 3 | RNVC: 2

1 Aug 1991

5340-66-160-1333
Bumper

661601333
M12754055: RNCC: 3 | RNVC: 2

4 Apr 2012

5340-66-139-1800
Locking Key

661391800
SCES10623: RNCC: 3 | RNVC: 1
KEY,LOCKING,LEVELING JACK: RNCC: 5 | RNVC: 1

6 Jul 1994

5340-66-150-4141
Screw Thread Insert And Tool Assortment

661504141
NO PRIMARY REF 66-150-4141: RNCC: 3 | RNVC: 2
09621215: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-150-3941
Butt Hinge

661503941
NO PRIMARY REF 66-150-3941: RNCC: 3 | RNVC: 2
06563415: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-138-8229
Nonmetallic Bumper

661388229
196640-05430: RNCC: 3 | RNVC: 2

21 Apr 1994

5340-66-108-4968
Clamping Catch

661084968
012M005-010: RNCC: 3 | RNVC: 2

29 May 1981

5340-66-161-0550
Mounting Bracket

661610550
ARLM1274-01: RNCC: 3 | RNVC: 2

7 May 2013

5340-66-150-3930
Butt Hinge

661503930
NO PRIMARY REF 66-150-3930: RNCC: 3 | RNVC: 2
04083201: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-110-8154
Pipe Hanger

661108154
180: RNCC: 3 | RNVC: 1

21 Nov 1981

5340-66-021-2502
Dust And Moisture Seal Protective Cap

660212502
D8109: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-158-0234
Door Button

661580234
7FA1000A61G01: RNCC: 3 | RNVC: 2

23 Jun 2009

5340-66-154-8531
Blank Panel

661548531
15010478-14: RNCC: 3 | RNVC: 2

19 Sep 2006

5340-66-155-8593
Bar

661558593
471-50834-103: RNCC: 3 | RNVC: 2
510251: RNCC: 5 | RNVC: 2

18 Jun 2007

5340-66-155-8848
Mounting Bracket

661558848
471-50807-171: RNCC: 3 | RNVC: 2
506073: RNCC: 5 | RNVC: 2

25 Jun 2007

5340-66-111-4140
Loop Clamp

661114140
1M3-88-768: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-66-140-5841
General Purpose Access Door

661405841
004-360: RNCC: 3 | RNVC: 2

9 Nov 1995

5340-66-158-8765
Loop Clamp

661588765
1372853: RNCC: 3 | RNVC: 2

17 Sep 2010

5340-66-147-8596
Lower Sheave

661478596
F/2888-570-003D: RNCC: 3 | RNVC: 2
Q EDE F/2888-570-003D: RNCC: 5 | RNVC: 2

26 Sep 2001

5340-66-138-9590
Strap

661389590
YA4354700040: RNCC: 3 | RNVC: 2
0064-35-470-0040: RNCC: C | RNVC: 1

12 Nov 1993

5340-66-146-1965
Access Cover

661461965
472 7407-03: RNCC: 3 | RNVC: 2

10 Feb 2000

5340-66-033-2650
Cushioning Pad

660332650
DC2983: RNCC: 3 | RNVC: 2

29 Aug 1969

5340-66-020-7794
Dust And Moisture Seal Protective Plug

660207794
H15637H: RNCC: 3 | RNVC: 2
H14866-14: RNCC: 5 | RNVC: 2
H15637H: RNCC: 5 | RNVC: 9
A7730294: RNCC: C | RNVC: 1

1 Jan 1968

5340-66-143-4237
Latch Bar

661434237
492420: RNCC: 3 | RNVC: 2

24 Apr 1998

5340-66-154-8202
Access Cover

661548202
15007952: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-66-156-4005
Electronic Equipment Hardware Kit

661564005
CES 20008: RNCC: 3 | RNVC: 2

20 Nov 2007

5340-66-033-8316
Latch

660338316
263-18SH2-2B: RNCC: 3 | RNVC: 2

7 Nov 1969

5340-66-130-1477
Clip

661301477
404-001-106: RNCC: 3 | RNVC: 2

25 Sep 1987

5340-66-143-4223
Door Frame

661434223
492348-02: RNCC: 3 | RNVC: 2

24 Apr 1998

5340-66-057-4343
Dust And Moisture Seal Protective Cap

660574343
16213-52: RNCC: 3 | RNVC: 2

29 Mar 1973

5340-66-126-2143
Loop Clamp

661262143
OM0-142378-G: RNCC: 3 | RNVC: 2

14 Dec 1990

5340-66-123-5281
Angle Bracket

661235281
750-05.2500-19: RNCC: 3 | RNVC: 2

9 Feb 1998

5340-66-150-5077
Nonmetallic Bumper

661505077
NO PRIMARY REF 66-150-5077: RNCC: 3 | RNVC: 2
08732202: RNCC: 5 | RNVC: 2

16 Apr 2003

5340-66-123-5322
Angle

661235322
750-05.2000-16: RNCC: 3 | RNVC: 2

26 Feb 1998

5340-66-088-1623
Barrel Bolt

660881623
1213-25101: RNCC: 3 | RNVC: 2
ZENITH HB0050: RNCC: 5 | RNVC: 2

7 Apr 1975

5340-66-155-6395
Mounting Bracket

661556395
X30QK314M: RNCC: 3 | RNVC: 2

1 May 2007

5340-66-154-9494
Retaining Band

661549494
471-60812-100: RNCC: 3 | RNVC: 2
510091: RNCC: 5 | RNVC: 2

17 Oct 2006

5340-66-152-6579
General Purpose Access Door

661526579
TAS201-14-10P-ITEM2: RNCC: 3 | RNVC: 2

15 Dec 2004

5340-66-144-5153
Clamping Catch

661445153
10616644: RNCC: 1 | RNVC: 2
10616644: RNCC: 3 | RNVC: 2
BH2: RNCC: 5 | RNVC: 1

23 Nov 1998

5340-66-129-3787
Webbing Strap

661293787
3111B1502.00: RNCC: 3 | RNVC: 2

4 Jan 1988

5340-66-128-4724
Nonmetallic Bumper

661284724
HYG2992: RNCC: 3 | RNVC: 2

4 Dec 1987

5340-66-154-8587
Catch Strike

661548587
15007785: RNCC: 3 | RNVC: 2

20 Sep 2006

5340-66-151-8048
Mounting Plate

661518048
23869880000: RNCC: 3 | RNVC: 2
23869880000: RNCC: 3 | RNVC: 2

28 Apr 2004

5340-66-133-8809
Seal Retaining Plate

661338809
553.10.09.227: RNCC: 3 | RNVC: 2

10 Nov 1997

5340-66-018-8919
Dust And Moisture Seal Boot

660188919
854264R2: RNCC: 3 | RNVC: 2
854264R2: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-66-145-8069
Angle Bracket

661458069
43/571: RNCC: 3 | RNVC: 2
D/43/571: RNCC: 3 | RNVC: 2

9 Nov 1999

5340-66-150-0762
Expansion Shield

661500762
NO PRIMARY REF 66-150-0762: RNCC: 3 | RNVC: 2
00721531: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-155-9846
Webbing Strap

661559846
471-40226-822T02: RNCC: 3 | RNVC: 2
522091: RNCC: 5 | RNVC: 2

18 Jul 2007

5340-66-148-5942
Hose Safety Yellow

661485942
HSY012-020: RNCC: 3 | RNVC: 2

10 Oct 2002

5340-66-054-4578
Angle Bracket

660544578
CA14-14: RNCC: 3 | RNVC: 2

18 Sep 1972

5340-66-145-5804
Mounting Bracket

661455804
DE250980509: RNCC: 3 | RNVC: 2

7 Oct 1999

5340-66-153-7079
Retaining Clip

661537079
47110411103-109: RNCC: 3 | RNVC: 2

17 Oct 2005

5340-66-160-7198
Cover Retainer

661607198
10008011: RNCC: 3 | RNVC: 2
1-403-Z: RNCC: 5 | RNVC: 2

12 Nov 2012

5340-66-161-2068
Loop Clamp

661612068
10001179-16: RNCC: 3 | RNVC: 2
TRLC16P: RNCC: 5 | RNVC: 2

24 Jul 2013

5340-66-154-5585
Mounting Bracket

661545585
008-02054-001: RNCC: 3 | RNVC: 2

6 Jul 2006

5340-66-141-2188
Nonmetallic Bumper

661412188
88.5292.0248: RNCC: 3 | RNVC: 2
VG95364 F75X89-CR55ST: RNCC: 3 | RNVC: 2

31 Oct 1995

5340-66-150-4036
Strapping

661504036
NO PRIMARY REF 66-150-4036: RNCC: 3 | RNVC: 2
05666216: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-144-5013
General Purpose Resilient Mount

661445013
M535603-60: RNCC: 3 | RNVC: 2

24 Nov 1998

5340-66-100-0343
General Purpose Resilient Mount

661000343
000N53022: RNCC: 3 | RNVC: 2

22 Dec 1978

5340-66-151-1326
Vent Plug

661511326
J536-0058: RNCC: 3 | RNVC: 2
LTB-A11-001 ITEM7: RNCC: 5 | RNVC: 2

16 Jun 2003

5340-66-032-3680
General Purpose Resilient Mount

660323680
M110-50: RNCC: 3 | RNVC: 2
09019306: RNCC: 5 | RNVC: 2

23 Sep 1969

5340-66-140-5816
Block Assembly

661405816
004-150-01: RNCC: 3 | RNVC: 2

26 Oct 1995

5340-66-151-9251
Key Holder

661519251
NO PRIMARY REF 66-151-9251: RNCC: 3 | RNVC: 2
1422286: RNCC: 5 | RNVC: 2

4 Mar 2004

5340-66-154-5413
Mounting Plate

661545413
004-01797-003: RNCC: 3 | RNVC: 2

3 Jul 2006

5340-66-065-1432
Double Angle Bracket

660651432
DSD587-2: RNCC: 3 | RNVC: 2

25 Oct 1975

5340-66-158-7557
Mounting Bracket

661587557
BMA-A10-0151-01: RNCC: 3 | RNVC: 2

28 Jul 2010

5340-66-158-0153
Mounting Plate

661580153
1728-BH-0813-01: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-66-122-6039
Bracket

5340-66-128-4487
Expansion Plug

661284487
1096000160: RNCC: 3 | RNVC: 2
1096000160: RNCC: 5 | RNVC: 2
9111290790: RNCC: 5 | RNVC: 9
9111290790: RNCC: 5 | RNVC: 9

23 Oct 1987

5340-66-138-3924
Lock-Release Lever

661383924
614515: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-66-159-1067
Blank Panel

661591067
GAG1140-6: RNCC: 3 | RNVC: 2

21 Feb 2011

5340-66-159-2784
Access Cover

661592784
10002-07001: RNCC: 3 | RNVC: 2

17 May 2011

5340-66-154-8189
Manual Control Handle

661548189
15007743: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-66-147-7936
Slide Assembly

661477936
F/2888-599-050A: RNCC: 3 | RNVC: 2
Q EDE F/2888-599-050A: RNCC: 5 | RNVC: 2

24 Sep 2001

5340-66-144-6060
Webbing Strap

661446060
11-240316A-20G: RNCC: 3 | RNVC: 2

15 Dec 1998

5340-66-143-7281
Spacing Threaded Standoff

661437281
658/2/06241/000: RNCC: 3 | RNVC: 2

4 Jul 1997

5340-66-157-7467
Nonmetallic Solid Wheel

661577467
N75/25/PBM12: RNCC: 3 | RNVC: 2

6 Mar 2009

5340-66-150-2036
Support Hook

661502036
NO PRIMARY REF 66-150-2036: RNCC: 3 | RNVC: 2
00817020: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-147-2559
Bracket

661472559
DAD54340: RNCC: 3 | RNVC: 2

12 Dec 2000

5340-66-157-6354
Mounting Bracket

661576354
DE253280074: RNCC: 3 | RNVC: 2

27 Jan 2009

5340-66-021-4989
Spring Tension Clip

660214989
ADE(A)29-41: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-155-9762
Leakproof Seal Plug

661559762
RC30-DA ITEM33: RNCC: 3 | RNVC: 2

18 Jul 2007

5340-66-140-4278
Hand Crank

661404278
FE85086B-125S: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-66-160-7783
Double Angle Bracket

661607783
15017197: RNCC: 3 | RNVC: 2

6 Dec 2012

5340-66-146-2644
Ra Protection Cover

661462644
1513564: RNCC: 3 | RNVC: 2

7 Mar 2000

5340-66-141-0070
Snap Hook

661410070
H323: RNCC: 3 | RNVC: 2

8 Aug 1995

5340-66-122-8954
Retaining Clip

5340-66-151-9408
Door Hook

661519408
NO PRIMARY REF 66-151-9408: RNCC: 3 | RNVC: 2
1913182: RNCC: 5 | RNVC: 2

4 Mar 2004

5340-66-066-4255
Angle Bracket

660664255
179349K: RNCC: 3 | RNVC: 2

7 Feb 1974

5340-66-156-3826
Mounting Bracket

661563826
15011335: RNCC: 3 | RNVC: 2

14 Nov 2007

5340-66-147-8973
Tube

661478973
E8MP-06 6MM BK: RNCC: 3 | RNVC: 2

5 Dec 2001

5340-66-154-7380
Webbing Strap

661547380
10006012-030: RNCC: 3 | RNVC: 2
10006012-030: RNCC: 5 | RNVC: 2

25 Aug 2006

5340-66-154-5087
General Purpose Access Door

661545087
021-03113-001: RNCC: 3 | RNVC: 2

19 Jun 2006

5340-66-150-0760
Expansion Shield

661500760
NO PRIMARY REF 66-150-0760: RNCC: 3 | RNVC: 2
02397711: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-120-4493
Nylon Tie Strip

5340-66-155-1505
Metallic Solid Wheel

661551505
LM-13W: RNCC: 3 | RNVC: 2

15 Dec 2006

5340-66-159-7267
Angle Bracket

661597267
112.35.07.471: RNCC: 3 | RNVC: 2

12 Jan 2012

5340-66-159-4083
Angle Bracket

661594083
4615600941: RNCC: 3 | RNVC: 2
4615600941: RNCC: 3 | RNVC: 2

23 Jun 2011

5340-66-159-5827
Retaining Strap

661595827
MCR102170000: RNCC: 3 | RNVC: 2

13 Oct 2011

5340-66-159-8341
Threaded Rod End

661598341
X50QL3153M: RNCC: 3 | RNVC: 2

28 Feb 2012

5340-66-138-2677
Catch Strike

661382677
C113SS: RNCC: 3 | RNVC: 2

4 Aug 1994

5340-66-150-5815
Key Holder

661505815
NO PRIMARY REF 66-150-5815: RNCC: 3 | RNVC: 2
03467259: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-052-5442
Spring Tension Clip

660525442
3GR1: RNCC: 3 | RNVC: 2

24 Nov 1972

5340-66-142-4882
Snap Hook

661424882
WD2325: RNCC: 3 | RNVC: 2

20 Aug 1996

5340-66-158-0732
Angle Bracket

661580732
1728-BH-1218-01: RNCC: 3 | RNVC: 2

28 Jul 2009

5340-66-123-5320
Cross Welded Frame

661235320
750-05.3000-15: RNCC: 3 | RNVC: 2

13 Feb 1998

5340-66-156-4378
Bracket Parts Kit

661564378
LAN-MD-D0116: RNCC: 3 | RNVC: 2

27 Nov 2007

5340-66-154-6285
Mounting Plate

661546285
471-51631-117: RNCC: 3 | RNVC: 2
524522: RNCC: 5 | RNVC: 2

31 Jul 2006

5340-66-090-1161
Mounting Bracket

660901161
MF001: RNCC: 3 | RNVC: 2

9 Sep 1975

5340-66-153-2665
Mounting Bracket

661532665
A210 0072-1: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-147-7259
Manipulator Arm

661477259
08-0230007: RNCC: 3 | RNVC: 2

27 Jun 2001

5340-66-152-4310
Mounting Bracket

661524310
15005592: RNCC: 3 | RNVC: 2

4 Dec 2004

5340-66-090-1184
Headless Straight Rod

660901184
AT100-10-032: RNCC: 3 | RNVC: 2

9 Sep 1975

5340-66-161-2660
Butt Hinge

661612660
1600-01-0301C1-02-P1: RNCC: 3 | RNVC: 2
QVRL1600010301C102P1: RNCC: 5 | RNVC: 2

12 Aug 2013

5340-66-134-4269
Block Clamp

661344269
703-48358-00: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-66-155-8980
Mounting Bracket

661558980
471-50807-230: RNCC: 3 | RNVC: 2
516936: RNCC: 5 | RNVC: 2

26 Jun 2007

5340-66-085-8608
Hinged Hasp

660858608
NO PRIMARY REF 66-085-8608: RNCC: 3 | RNVC: 2
04060907: RNCC: 5 | RNVC: 2
04060907: RNCC: 5 | RNVC: 2

9 Sep 1976

5340-66-154-8128
Mounting Bracket

661548128
471-50806-136: RNCC: 3 | RNVC: 2
509448: RNCC: 5 | RNVC: 2

11 Sep 2006

5340-66-154-8798
Access Cover

661548798
3000-1132-01-76: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-66-146-1530
Spring Support

661461530
537121 01: RNCC: 3 | RNVC: 2

1 Feb 2000

5340-66-033-5580
Swivel Caster

660335580
MCN7E78: RNCC: 3 | RNVC: 2

28 Oct 1969

5340-66-160-7515
Mounting Plate

661607515
15008489: RNCC: 3 | RNVC: 2

26 Nov 2012

5340-66-157-3682
Dust And Moisture Seal Protective Cap

661573682
10032085: RNCC: 3 | RNVC: 2

24 Oct 2008

5340-66-158-6762
Mounting Plate

661586762
RAY184022-5: RNCC: 3 | RNVC: 2
RAY184022-5: RNCC: 5 | RNVC: 2

1 Jun 2010

5340-66-155-0489
Filler Opening Cap

661550489
1414-05-02/2: RNCC: 3 | RNVC: 2

22 Nov 2006

5340-66-158-1668
Mounting Bracket

661581668
BDI 30400-6-4-2: RNCC: 3 | RNVC: 2

11 Sep 2009

5340-66-161-1734
Access Cover

661611734
15018335-G: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-66-139-3385
General Purpose Access Door

661393385
A1113: RNCC: 3 | RNVC: 2

31 Aug 1994

5340-66-160-7958
Metal Grille

661607958
ZMP13: RNCC: 3 | RNVC: 2
ZMP13: RNCC: 5 | RNVC: 2

14 Dec 2012

5340-66-159-1735
Manual Control Handle

661591735
15019193: RNCC: 3 | RNVC: 2

22 Mar 2011

5340-66-157-1326
Door Handle Unit

661571326
931SC: RNCC: 3 | RNVC: 2
HSG000262: RNCC: 5 | RNVC: 2
M4147: RNCC: 5 | RNVC: 2

11 Aug 2008

5340-66-145-5806
Bow Handle

661455806
DE250980610: RNCC: 3 | RNVC: 2

7 Oct 1999

5340-66-146-7012
Breaker Collar

661467012
1408142: RNCC: 3 | RNVC: 2

15 Aug 2000

5340-66-141-6106
Cradle Assembly

661416106
GYD287: RNCC: 3 | RNVC: 2
008-287: RNCC: 3 | RNVC: 2

25 Sep 1996

5340-66-102-0860
Angle Bracket

661020860
B17: RNCC: 3 | RNVC: 2

1 Jun 1979

5340-66-155-1687
Support Ring

661551687
347 496: RNCC: 3 | RNVC: 2

19 Dec 2006

5340-66-149-9451
Retaining Strap

661499451
NO PRIMARY REF 66-149-9451: RNCC: 3 | RNVC: 2
02409153: RNCC: 5 | RNVC: 2

10 Apr 2003

5340-66-145-9563
Bush

661459563
5490572: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-66-155-5051
Manual Control Handle

661555051
PHS70-700-1: RNCC: 3 | RNVC: 2

3 Apr 2007

5340-66-156-7679
Mounting Plate

661567679
471-51631-136: RNCC: 3 | RNVC: 2
525183: RNCC: 5 | RNVC: 2

27 Mar 2008

5340-66-161-2128
Padlock

661612128
34S45/519/TW144: RNCC: 3 | RNVC: 2

26 Jul 2013

5340-66-159-3954
Bolt And Spacer Kit

661593954
P17-DBOLTKIT9.52127: RNCC: 3 | RNVC: 2

22 Jun 2011

5340-66-034-7109
Retainer

660347109
2C5458: RNCC: 3 | RNVC: 2

30 Jan 1960

5340-66-037-4330
General Purpose Resilient Mount

660374330
GB224: RNCC: 3 | RNVC: 2

28 Sep 1970

5340-66-154-3828
Webbing Strap

661543828
DE252450020: RNCC: 3 | RNVC: 2

9 May 2006

5340-66-152-3782
Double Angle Bracket

661523782
DE251940013: RNCC: 3 | RNVC: 2

13 Oct 2004

5340-66-128-8728
Cover Right Hand

661288728
47703-60031: RNCC: 3 | RNVC: 2
2530-97-151-3253: RNCC: C | RNVC: 1

25 Oct 1993

5340-66-148-8900
Pipe Hanger

661488900
5510/1A-PC2: RNCC: 3 | RNVC: 2

15 Nov 2002

5340-66-109-3013
Loop Clamp

5340-66-144-5083
Mounting Bracket

661445083
A209142-7C: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-66-158-7575
Mounting Bracket

661587575
BMA-A08-0209-01: RNCC: 3 | RNVC: 2

28 Jul 2010

5340-66-155-4697
Webbing Strap

661554697
BME-A05-1485-01: RNCC: 3 | RNVC: 2

29 Mar 2007

5340-66-161-0549
Self-Locking Insert

661610549
DE0-00015-902: RNCC: 3 | RNVC: 2

7 May 2013

5340-66-132-6579
Catch Strike

661326579
C103Z: RNCC: 3 | RNVC: 2

13 Apr 1989

5340-66-090-6092
End Plate

660906092
DP2497: RNCC: 3 | RNVC: 2

23 Jan 1972

5340-66-131-6395
Mounting Bracket

661316395
3252126R2: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-66-125-3307
General Purpose Access Door

661253307
DE580160624: RNCC: 3 | RNVC: 2

26 Feb 1986

5340-66-046-6263
Angle Bracket

660466263
NS467: RNCC: 3 | RNVC: 2

19 Aug 1972

5340-66-138-9389
Compressor Handle

661389389
290074400: RNCC: 3 | RNVC: 2
0080-00-000-4802: RNCC: C | RNVC: 1

2 Nov 1993

5340-66-132-6898
General Purpose Resilient Mount

661326898
FAS: RNCC: 3 | RNVC: 2

17 May 1989

5340-66-156-2826
Loop Clamp

661562826
RSGU 1.11.1/15 W1: RNCC: 3 | RNVC: 2
10001179-11: RNCC: 5 | RNVC: 2

19 Oct 2007

5340-66-156-3352
Mounting Plate

661563352
15016027: RNCC: 3 | RNVC: 2

1 Nov 2007

5340-66-142-5169
Access Cover

661425169
6.095.3065: RNCC: 3 | RNVC: 2

15 Oct 1996

5340-66-155-1448
Access Cover

661551448
17444061: RNCC: 3 | RNVC: 2
17444061: RNCC: 5 | RNVC: 2

14 Dec 2006

5340-66-152-3590
Mounting Bracket

661523590
240519A: RNCC: 3 | RNVC: 2
240519A: RNCC: 5 | RNVC: 2

22 Sep 2004

5340-66-098-1284
Leather Strap

660981284
BINOCULAR STRAP: RNCC: 3 | RNVC: 1

22 Aug 1978

5340-66-087-6685
Expansion Shield

660876685
1213-214295: RNCC: 3 | RNVC: 2

20 Apr 1975

5340-66-140-6906
Access Cover

661406906
MODKIT7360661390641: RNCC: 3 | RNVC: 1
VCP: RNCC: 5 | RNVC: 2

29 Aug 1995

5340-66-158-8403
Double Angle Bracket

661588403
BMA-A26-0133-01: RNCC: 3 | RNVC: 2
BMA-A26-0133: RNCC: 5 | RNVC: 2

23 Aug 2010

5340-66-140-5437
Mounting Bracket

661405437
DE250530114: RNCC: 3 | RNVC: 2

28 Apr 1995

5340-66-033-6632
General Purpose Access Door

660336632
30-31210-2: RNCC: 3 | RNVC: 2

20 Sep 1969

5340-66-122-2677
Door Fastener

661222677
A1-1174-82-03 S1 ITEM 3: RNCC: 3 | RNVC: 2

29 Apr 1985

5340-66-158-7809
Manual Control Lever

661587809
425-R07A: RNCC: 3 | RNVC: 2
425-R07A: RNCC: 5 | RNVC: 2

29 Jul 2010

5340-66-142-4435
Webbing Strap

661424435
1435188: RNCC: 3 | RNVC: 2

31 Jul 1996

5340-66-141-5096
Spring Tension Clip

661415096
E865419S: RNCC: 3 | RNVC: 2
2867957: RNCC: 3 | RNVC: 2
2867957: RNCC: 5 | RNVC: 2

19 Jul 1996

5340-66-141-5476
Mounting Bracket

661415476
DE250530371: RNCC: 3 | RNVC: 2
DE250530371: RNCC: 3 | RNVC: 2

14 Jun 1996

5340-66-141-6108
Mount Assembly

661416108
008-284: RNCC: 3 | RNVC: 2
008-284: RNCC: 3 | RNVC: 2

25 Sep 1996

5340-66-088-1823
Door Hook

660881823
1213-251243: RNCC: 3 | RNVC: 2

20 Apr 1975

5340-66-139-2051
Access Cover

661392051
406KB156: RNCC: 3 | RNVC: 2

27 May 1994

5340-66-154-4364
Angle Bracket

661544364
ARLM0772: RNCC: 3 | RNVC: 2

25 May 2006

5340-66-128-5897
Double Angle Bracket

661285897
700725: RNCC: 3 | RNVC: 2
HYL9433: RNCC: 5 | RNVC: 2

29 Jan 1990

5340-66-138-2567
General Purpose Access Door

661382567
553.30.09.264: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-66-116-5536
Retaining Strap

661165536
180/25: RNCC: 3 | RNVC: 2

6 Oct 1983

5340-66-160-1034
Dust And Moisture Seal Boot

661601034
7034-1811: RNCC: 3 | RNVC: 2

29 Mar 2012

5340-66-152-4102
Strap Fastener Loop

661524102
DEF(AUST)2010: RNCC: 3 | RNVC: 1
5340-059: RNCC: 3 | RNVC: 1
DEF(AUST)2010: RNCC: 4 | RNVC: 1

6 Nov 2004

5340-66-153-6697
Webbing Strap

661536697
9125D05042001-001: RNCC: 3 | RNVC: 2

11 Oct 2005

5340-66-090-1175
Angle Bracket

660901175
AR15-009: RNCC: 3 | RNVC: 2

9 Sep 1975

5340-66-155-4600
Rod End Connector

661554600
22B-30-13110: RNCC: 3 | RNVC: 2
22B-30-13110: RNCC: 5 | RNVC: 2

28 Mar 2007

5340-66-136-4455
Access Cover

661364455
16160-01: RNCC: 3 | RNVC: 2

13 Jan 1993

5340-66-146-3282
Barrel Bolt

661463282
0497 3007: RNCC: 3 | RNVC: 2
02007: RNCC: 5 | RNVC: 2
04973007: RNCC: 5 | RNVC: 2

5 Apr 2000

5340-66-157-7331
Felling Dog

661577331
503 71 97-01: RNCC: 3 | RNVC: 2
503 71 97-01: RNCC: 5 | RNVC: 2

2 Mar 2009

5340-66-126-2163
Hand Crank

661262163
OM0-142394-10: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-66-152-4801
Rifle Lock Lever

661524801
YA 437 899 00 50: RNCC: 3 | RNVC: 2

2 Feb 2005

5340-66-011-2925
Retaining Strap

660112925
TSE(V)93-301: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-146-3943
Psu Subframe

661463943
73273-1-07: RNCC: 3 | RNVC: 2

4 May 2000

5340-66-146-9151
Crankarm Adapter Ki

661469151
ZG-AF108: RNCC: 3 | RNVC: 2

4 Oct 2000

5340-66-146-7834
Adapter

661467834
LARC 0904: RNCC: 3 | RNVC: 2
LARC 0904: RNCC: 5 | RNVC: 2

25 Sep 2000

5340-66-151-3534
Mounting Bracket

661513534
016AMR395-2: RNCC: 3 | RNVC: 2

23 Jul 2004

5340-66-131-8146
Dust And Moisture Seal Protective Cap

661318146
GEC 01: RNCC: 3 | RNVC: 2
GEC01: RNCC: 5 | RNVC: 2

22 Nov 1988

5340-66-112-3634
Access Cover

661123634
527.20.09.097: RNCC: 3 | RNVC: 2
527.20.09.097: RNCC: 3 | RNVC: 2

20 Aug 1990

5340-66-158-6112
Mounting Bracket

661586112
MP08022001-2: RNCC: 3 | RNVC: 2

16 Apr 2010

5340-66-127-8415
Angle Bracket

661278415
EX20044221: RNCC: 3 | RNVC: 2

9 Mar 1987

5340-66-160-9014
Mounting Plate

661609014
RCD-1PT: RNCC: 3 | RNVC: 2
15018917: RNCC: 5 | RNVC: 2

27 Feb 2013

5340-66-144-2487
Dust And Moisture Seal Protective Plug

661442487
80/T37: RNCC: 3 | RNVC: 2

19 Aug 1998

5340-66-151-7396
Access Cover

661517396
BHE 03017: RNCC: 3 | RNVC: 2

9 Jan 2004

5340-66-150-1585
Dust And Moisture Seal Protective Cap

661501585
NO PRIMARY REF 66-150-1585: RNCC: 3 | RNVC: 2
04588418: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-099-5644
Loop Clamp

660995644
450001K: RNCC: 3 | RNVC: 2

22 Dec 1978

5340-66-151-3656
Bow Handle

661513656
NALM00241-9: RNCC: 3 | RNVC: 2

3 Nov 2004

5340-66-133-6437
Lock-Release Lever

661336437
CLC3-2: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

28 Feb 1990

5340-66-153-7109
Sun Shield

661537109
9125D40001023/B: RNCC: 3 | RNVC: 2

17 Oct 2005

5340-66-158-2580
Access Cover

661582580
BDI 30400-8-1: RNCC: 3 | RNVC: 2

15 Oct 2009

5340-66-151-7834
Mounting Bracket

661517834
AZ112M2: RNCC: 3 | RNVC: 2

20 Mar 2004

5340-66-153-8570
Dust And Moisture Seal Protective Cap

661538570
SS-075DC: RNCC: 3 | RNVC: 2
SS-075DC: RNCC: 5 | RNVC: 2

17 Nov 2005

5340-66-138-4753
Mounting Bracket

661384753
016AMR269-3: RNCC: 3 | RNVC: 2

24 Nov 1993

5340-66-125-4452
Bracket

661254452
SS9049/B101: RNCC: 3 | RNVC: 2

21 Apr 1986

5340-66-122-8025
Spring Tension Clip

661228025
GEG341: RNCC: 3 | RNVC: 2

6 Jun 1985

5340-66-075-0793
Hinged Hasp

5340-66-145-2152
Mounting Bracket

661452152
NE0128.Q: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-66-157-7967
Access Cover

661577967
20504-1: RNCC: 3 | RNVC: 2

30 Mar 2009

5340-66-158-2155
Block Clamp

661582155
SSSD184-G: RNCC: 3 | RNVC: 2

1 Oct 2009

5340-66-105-4667
Manual Control Lever

661054667
F401-D: RNCC: 3 | RNVC: 2

28 May 1988

5340-66-153-8171
Loop Clamp

661538171
952627-8: RNCC: 3 | RNVC: 2
952627-8: RNCC: 5 | RNVC: 2
952627-8: RNCC: 5 | RNVC: 2

10 Nov 2005

5340-66-137-3055
General Purpose Access Door

661373055
E.1023: RNCC: 3 | RNVC: 2

10 Nov 1992

5340-66-138-9693
Locking Plate

661389693
RAMP STRINGER LOCK PLATE: RNCC: 3 | RNVC: 2

9 Dec 1993

5340-66-155-3713
Crank Arm

661553713
471-40217-310: RNCC: 3 | RNVC: 2
508708: RNCC: 5 | RNVC: 2

14 Mar 2007

5340-66-153-7874
Access Cover

661537874
ARLM0614: RNCC: 3 | RNVC: 2

1 Nov 2005

5340-66-038-2467
Retaining Strap

660382467
261-16: RNCC: 3 | RNVC: 1

24 Feb 1971

5340-66-150-0665
Padlock

661500665
NO PRIMARY REF 66-150-0665: RNCC: 3 | RNVC: 2
03381290: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-135-6283
Locking Plate

661356283
114.48.07.120: RNCC: 3 | RNVC: 2

5 Nov 1991

5340-66-161-3088
Dust And Moisture Seal Protective Cover

661613088
DE590800001: RNCC: 3 | RNVC: 2

2 Sep 2013

5340-66-148-5526
Lid And Gasket Kit

661485526
90488: RNCC: 3 | RNVC: 2

12 Jul 2002

5340-66-144-5250
Mounting Bracket

661445250
A209142-5K: RNCC: 3 | RNVC: 2

3 Dec 1998

5340-66-157-6745
Air Heat Exchanger

661576745
AA-22565: RNCC: 3 | RNVC: 2

6 Feb 2009

5340-66-154-8591
Mounting Bracket

661548591
DE252320003: RNCC: 3 | RNVC: 2
15009460-02: RNCC: 3 | RNVC: 2

20 Sep 2006

5340-66-135-2731
Dust And Moisture Seal Protective Plug

661352731
5659-4: RNCC: 3 | RNVC: 2
38260899: RNCC: 5 | RNVC: 2

20 Jan 1992

5340-66-158-6835
Mounting Bracket

661586835
RAY184026-9: RNCC: 3 | RNVC: 2
RAY184026-9: RNCC: 5 | RNVC: 2

3 Jun 2010

5340-66-154-5803
Plain Solid Disk

661545803
DE252130104: RNCC: 3 | RNVC: 2

12 Jul 2006

5340-66-153-4395
Mounting Plate

661534395
DE252190043: RNCC: 3 | RNVC: 2

19 Aug 2005

5340-66-147-8652
Kit Mounting

661478652
640706: RNCC: 3 | RNVC: 2

10 Oct 2001

5340-66-147-7258
Manipulator Grip

661477258
08-0230000: RNCC: 3 | RNVC: 2

27 Jun 2001

5340-66-146-3873
Access Cover

661463873
C31-G03-200-001: RNCC: 3 | RNVC: 2

4 May 2000

5340-66-153-5382
Hand Crank

661535382
12-00085-AS-ASY: RNCC: 3 | RNVC: 2

6 Sep 2005

5340-66-157-4642
Webbing Strap

661574642
468-C2-1300: RNCC: 3 | RNVC: 2

26 Nov 2008

5340-66-159-1428
Mounting Bracket

661591428
042407A-00: RNCC: 3 | RNVC: 2

7 Mar 2011

5340-66-139-8503
General Purpose Resilient Mount

661398503
P471-90200-127-T01: RNCC: 3 | RNVC: 2

31 Aug 1994

5340-66-123-5188
Angle Bracket

661235188
750-05.2000-17: RNCC: 3 | RNVC: 2

23 Jan 1998

5340-66-150-4142
Screw Thread Insert And Tool Assortment

661504142
NO PRIMARY REF 66-150-4142: RNCC: 3 | RNVC: 2
06459008: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-155-9543
Retaining Strap

661559543
P471-90000-123T11: RNCC: 3 | RNVC: 2
1088051: RNCC: 5 | RNVC: 2

10 Jul 2007

5340-66-144-8912
Bipod Leg Pad

661448912
008-629: RNCC: 3 | RNVC: 2
GYD629: RNCC: 5 | RNVC: 2

22 Apr 1999

5340-66-139-4569
Mounting Bracket

661394569
144-607401: RNCC: 3 | RNVC: 2

12 Dec 1994

5340-66-154-7021
Electronic Equipment Hardware Kit

661547021
SCES13907: RNCC: 3 | RNVC: 2

16 Aug 2006

5340-66-154-7316
Rod End Clevis

661547316
15003901: RNCC: 3 | RNVC: 2

24 Aug 2006

5340-66-137-7236
Double Angle Bracket

661377236
1383-12/2E: RNCC: 3 | RNVC: 2

23 Mar 1993

5340-66-160-7155
Angle Bracket

661607155
90-5343-02: RNCC: 3 | RNVC: 2

7 Nov 2012

5340-66-137-1727
Electronic Equipment Hardware Kit

661371727
A000565 SHT 24: RNCC: 3 | RNVC: 1
26-08145: RNCC: 5 | RNVC: 2

10 Oct 1992

5340-66-154-8987
Access Cover

661548987
579.10.09.024: RNCC: 3 | RNVC: 2

3 Oct 2006

5340-66-117-9183
Hinge

661179183
350A21-1266-21: RNCC: 3 | RNVC: 2

16 Jun 1984

5340-66-150-0205
Rigid Caster

661500205
NO PRIMARY REF 66-150-0205: RNCC: 3 | RNVC: 2
01068406: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-150-1401
Earplugs Airsoft Co

661501401
NO PRIMARY REF 66-150-1401: RNCC: 3 | RNVC: 2
04724865: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-150-0260
Swivel Caster

661500260
NO PRIMARY REF 66-150-0260: RNCC: 3 | RNVC: 2
01064921: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-126-7230
Loop Clamp

661267230
6128-11-5432: RNCC: 3 | RNVC: 2

8 May 1986

5340-66-037-1992
Double Angle Bracket

660371992
ADE(V)97-131: RNCC: 3 | RNVC: 2

13 Nov 1970

5340-66-021-0472
Webbing Strap

660210472
ADE(M)7-109: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-146-4698
Liquid Co Strainer

661464698
PH 760-025: RNCC: 3 | RNVC: 2

23 May 2000

5340-66-161-2759
Clamping Catch

661612759
1277017: RNCC: 3 | RNVC: 2

19 Aug 2013

5340-66-132-7309
Angle Bracket

661327309
DE25020028: RNCC: 3 | RNVC: 2

30 May 1989

5340-66-154-5779
Plain Solid Disk

661545779
DE252130127: RNCC: 3 | RNVC: 2

12 Jul 2006

5340-66-155-3986
Dust And Moisture Seal Protective Cover

661553986
6144-81-5151: RNCC: 3 | RNVC: 2
6144-81-5151: RNCC: 5 | RNVC: 2

21 Mar 2007

5340-66-147-8872
Mounting Bracket

661478872
F/2888-550-018D: RNCC: 3 | RNVC: 2

29 Nov 2001

5340-66-147-7832
Boom Frame Assembly

661477832
F/2888-530-002A: RNCC: 3 | RNVC: 2
Q EDE F/2888-530-002A: RNCC: 5 | RNVC: 2

18 Sep 2001

5340-66-142-9779
Angle Bracket

661429779
658/2/06033/000: RNCC: 3 | RNVC: 2

5 May 1997

5340-66-155-8358
Filler Guide

661558358
471-40204-188: RNCC: 3 | RNVC: 2
519502: RNCC: 5 | RNVC: 2

13 Jun 2007

5340-66-142-4624
Mounting Bracket

661424624
471-90423-181: RNCC: 3 | RNVC: 2
514307: RNCC: 3 | RNVC: 2

20 Aug 1996

5340-66-145-5758
Mounting Bracket

661455758
10114020: RNCC: 3 | RNVC: 2

5 Oct 1999

5340-66-158-1551
Mounting Plate

661581551
CRMP-001-V5-RHS: RNCC: 3 | RNVC: 2

7 Sep 2009

5340-66-160-9499
Mounting Bracket

661609499
BMD-A26-0013-02: RNCC: 3 | RNVC: 2

21 Mar 2013

5340-66-119-3607
General Purpose Resilient Mount

661193607
912102-4: RNCC: 3 | RNVC: 2

27 Oct 1983

5340-66-017-9836
Dust And Moisture Seal Protective Plug

660179836
GS195-6: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-154-6164
Bearing Block Guide

661546164
471-50806-105: RNCC: 3 | RNVC: 2
509412: RNCC: 5 | RNVC: 2

25 Jul 2006

5340-66-156-5605
Mounting Plate

661565605
6302320: RNCC: 3 | RNVC: 2
15012902: RNCC: 5 | RNVC: 2

16 Jan 2008

5340-66-161-1766
Access Cover

661611766
15017358: RNCC: 3 | RNVC: 2

15 Jul 2013

5340-66-145-2426
Mounting Bracket

661452426
60137: RNCC: 3 | RNVC: 2

25 Aug 1999

5340-66-139-6160
Crank Handle

661396160
56W4-S116 PC 12: RNCC: 3 | RNVC: 1
56W4-S116 PC 12: RNCC: 3 | RNVC: 2

5 Jul 1994

5340-66-155-1163
Rod End Clevis

661551163
ARLM0852-05: RNCC: 3 | RNVC: 2

7 Dec 2006

5340-66-139-2350
Spacing Threaded Standoff

661392350
704/2/11419: RNCC: 3 | RNVC: 2

21 Jul 1994

5340-66-043-2596
Suction Cup

660432596
VG14: RNCC: 3 | RNVC: 2

23 Aug 1971

5340-66-146-2035
Access Cover

661462035
472 8374-01: RNCC: 3 | RNVC: 2

14 Feb 2000

5340-66-123-8510
Double Angle Bracket

661238510
ARLM0118-007: RNCC: 3 | RNVC: 2

2 Nov 1998

5340-66-083-8072
Mast Lifting Clamp

660838072
19A1307: RNCC: 3 | RNVC: 2

27 Jan 1975

5340-66-026-4060
Escutcheon Plate

660264060
884137R1: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-158-6629
Dust And Moisture Seal Protective Cap

661586629
OC-001-D2-01: RNCC: 3 | RNVC: 2

20 May 2010

5340-66-064-4077
Spindle Bearing Kit

660644077
S5235-3CIRCLIPS5172-3BALL: RNCC: 3 | RNVC: 2

29 Mar 1974

5340-66-025-2590
Governor Dampen Rod

660252590
GEF356-1: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-154-8506
Blank Panel

661548506
15010478-01: RNCC: 3 | RNVC: 2

19 Sep 2006

5340-66-155-3762
Bumper

661553762
471-20211-118: RNCC: 3 | RNVC: 2
507923: RNCC: 5 | RNVC: 2

15 Mar 2007

5340-66-146-9148
Mounting Bracket

661469148
ZG-107: RNCC: 3 | RNVC: 2

4 Oct 2000

5340-66-157-4539
Webbing Strap

661574539
468-B11-1600: RNCC: 3 | RNVC: 2

25 Nov 2008

5340-66-144-6477
Buckle

661446477
43-1041-3: RNCC: 3 | RNVC: 2

12 Feb 1999

5340-66-146-8989
Mounting Bracket

661468989
MEB/S: RNCC: 3 | RNVC: 2

28 Sep 2000

5340-66-157-7557
Angle Bracket

661577557
NALM00714-1: RNCC: 3 | RNVC: 2

16 Mar 2009

5340-66-160-0615
Mounting Bracket

661600615
ARLM1271-1: RNCC: 3 | RNVC: 2

26 Mar 2012

5340-66-158-3002
Double Angle Bracket

661583002
BDI 30400-7-7S: RNCC: 3 | RNVC: 2

30 Oct 2009

5340-66-125-9021
Multiple Angle Bracket

661259021
8071-1010: RNCC: 3 | RNVC: 2
8071-110-3.4: RNCC: 3 | RNVC: 2

21 Jun 1990

5340-66-154-6725
Outlet Nozzle Kit

661546725
90510: RNCC: 3 | RNVC: 2

10 Aug 2006

5340-66-153-4883
Dust And Moisture Seal Protective Cover

661534883
5811482: RNCC: 3 | RNVC: 2
5811482: RNCC: 5 | RNVC: 2

29 Aug 2005

5340-66-123-8569
Double Angle Bracket

661238569
ARLM0118-003: RNCC: 3 | RNVC: 2

6 Nov 1998

5340-66-147-8580
Stowage Cabin Panel

661478580
F/2888-550-034J: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-034J: RNCC: 5 | RNVC: 2

25 Sep 2001

5340-66-146-0806
Packed G Rear Cover

661460806
AK11022: RNCC: 3 | RNVC: 2
AK11022: RNCC: 5 | RNVC: 2
AK11022: RNCC: 5 | RNVC: 2

7 Jan 2000

5340-66-157-4441
Mounting Plate

661574441
V01-06-02-02-00: RNCC: 3 | RNVC: 2

25 Nov 2008

5340-66-158-6951
Expansion Shield

661586951
503 52 87-02: RNCC: 3 | RNVC: 2
503 52 87-02: RNCC: 5 | RNVC: 2

10 Jun 2010

5340-66-147-9403
Female Camlock To B

661479403
AD050: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-66-158-6800
Mounting Bracket

661586800
RAY184022-1: RNCC: 3 | RNVC: 2

3 Jun 2010

5340-66-085-5154
Flush Lock

660855154
3574WTL: RNCC: 3 | RNVC: 2
575-51: RNCC: 5 | RNVC: 2

19 Oct 1975

5340-66-149-9442
Retaining Strap

661499442
NO PRIMARY REF 66-149-9442: RNCC: 3 | RNVC: 2
02415855: RNCC: 5 | RNVC: 2

10 Apr 2003

5340-66-160-2161
Butt Hinge

661602161
BMU-V05-3001-01: RNCC: 3 | RNVC: 2

30 Apr 2012

5340-66-140-1744
Access Cover

661401744
155U2600: RNCC: 3 | RNVC: 2
10730-19B: RNCC: 3 | RNVC: 2

1 Dec 1994

5340-66-142-9773
Butt Hinge

661429773
658/2/06265/000: RNCC: 3 | RNVC: 2

1 May 1997

5340-66-147-7929
Hydraulic Tank

661477929
F/2888-560-003A: RNCC: 3 | RNVC: 2
Q EDE F/2888-560-003A: RNCC: 5 | RNVC: 2

24 Sep 2001

5340-66-021-4245
Expansion Shield

660214245
TAMPIN 1-4 IN: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-139-7313
Pawl Fastener

661397313
62-80-304-50: RNCC: 3 | RNVC: 2
279.610474: RNCC: 3 | RNVC: 2

8 Aug 1994

5340-66-154-7428
Webbing Strap

661547428
10006014-090: RNCC: 3 | RNVC: 2
10006014-090: RNCC: 5 | RNVC: 2

28 Aug 2006

5340-66-126-2814
General Purpose Resilient Mount

661262814
6E5-14737-00: RNCC: 3 | RNVC: 2
6E5-14737-00: RNCC: 3 | RNVC: 2

16 Jan 1991

5340-66-123-5287
Manual Control Handle

661235287
750.05.2500-25: RNCC: 3 | RNVC: 2

10 Feb 1998

5340-66-150-0244
Swivel Caster

661500244
NO PRIMARY REF 66-150-0244: RNCC: 3 | RNVC: 2
00353243: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-149-7166
Turnbuckle

661497166
NO PRIMARY REF 66-149-7166: RNCC: 3 | RNVC: 2
00484738: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-152-4101
Strap Fastener Loop

661524101
5340-060: RNCC: 3 | RNVC: 1
DEF(AUST)2010: RNCC: 3 | RNVC: 1
DEF(AUST)2010: RNCC: 4 | RNVC: 1

6 Nov 2004

5340-66-138-8194
Headless Straight Rod

661388194
196640-01611: RNCC: 3 | RNVC: 2

27 Apr 1994

5340-66-154-0745
Butt Hinge

661540745
BMA-A05-1678-01: RNCC: 3 | RNVC: 2

14 Feb 2006

5340-66-155-8974
Spear Stem

661558974
471-50807-152: RNCC: 3 | RNVC: 2
506058: RNCC: 5 | RNVC: 2

26 Jun 2007

5340-66-154-8405
Mounting Plate

661548405
ARLM0860-1: RNCC: 3 | RNVC: 2

15 Sep 2006

5340-66-041-1130
Angle Bracket

660411130
916441-1: RNCC: 3 | RNVC: 2

21 May 1971

5340-66-160-7882
Vent Plug

661607882
FA-CPF-111: RNCC: 3 | RNVC: 2

11 Dec 2012

5340-66-157-8554
Mounting Bracket

661578554
471-90243-103: RNCC: 3 | RNVC: 2

22 Apr 2009

5340-66-161-0031
Mechanic Equipment Hardware Kit

661610031
IREA15 / ITEM 04: RNCC: 3 | RNVC: 2

15 Apr 2013

5340-66-157-1816
Padlock Eye

661571816
MHC043-01: RNCC: 3 | RNVC: 2
MHC043: RNCC: 5 | RNVC: 2

28 Aug 2008

5340-66-154-5618
Door Lock Kits

661545618
940008: RNCC: 3 | RNVC: 2
02L-940008: RNCC: 5 | RNVC: 2

6 Jul 2006

5340-66-151-0669
Mounting Bracket

661510669
LTA-A02-0288-01: RNCC: 3 | RNVC: 2
LTA-A02-0288: RNCC: 5 | RNVC: 2

30 Apr 2003

5340-66-161-0115
Butt Hinge

661610115
HINGE-A60: RNCC: 3 | RNVC: 2

18 Apr 2013

5340-66-156-2691
Mechanical Stop

661562691
471-90429-709: RNCC: 3 | RNVC: 2
502105: RNCC: 5 | RNVC: 2

15 Oct 2007

5340-66-143-4446
Lh Side Panel

661434446
492077-01: RNCC: 3 | RNVC: 2

6 May 1998

5340-66-160-6550
Multiple Angle Bracket

661606550
ID25-286: RNCC: 3 | RNVC: 2

3 Oct 2012

5340-66-150-9700
Lh Vent Cover

661509700
D-2515: RNCC: 3 | RNVC: 2

18 Jun 2004

5340-66-157-0740
Edge Roller

661570740
ER2: RNCC: 3 | RNVC: 2
ER2: RNCC: 5 | RNVC: 2

16 Jul 2008

5340-66-150-8973
Dust And Moisture Seal Protective Cap

661508973
J-4/KG94A: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-66-129-5352
Glove Door Bracket

661295352
SR12B8250-7: RNCC: 3 | RNVC: 2

6 Oct 1999

5340-66-155-8393
Runner

661558393
471-50809-145: RNCC: 3 | RNVC: 2
502579: RNCC: 5 | RNVC: 2

14 Jun 2007

5340-66-157-0905
Dust And Moisture Seal Protective Cap

661570905
07145-00050: RNCC: 3 | RNVC: 2
07145-00050: RNCC: 5 | RNVC: 2

22 Jul 2008

5340-66-153-4097
Mounting Plate

661534097
15012814-01: RNCC: 3 | RNVC: 2

12 Aug 2005

5340-66-144-6475
Webbing Strap

661446475
43-1041-1: RNCC: 3 | RNVC: 2

11 Feb 1999

5340-66-126-2307
Retaining Clip

661262307
90468-05M03: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-66-142-4632
Mounting Bracket

661424632
471-90423-103T09: RNCC: 3 | RNVC: 2
516787: RNCC: 3 | RNVC: 2

20 Aug 1996

5340-66-134-8303
Dust And Moisture Seal Protective Cap-Plug

661348303
634040BA: RNCC: 3 | RNVC: 2

5 Jul 1990

5340-66-161-2896
Door Closer

661612896
TS 37 V: RNCC: 3 | RNVC: 2
TS 37 V: RNCC: 5 | RNVC: 2

22 Aug 2013

5340-66-158-4940
Mounting Plate

661584940
STS-A05-3014-01: RNCC: 3 | RNVC: 2
STS-A05-3014: RNCC: 7 | RNVC: 2

22 Feb 2010

5340-66-154-1917
Mounting Bracket

661541917
S0E56A1E4860-403: RNCC: 3 | RNVC: 2

21 Mar 2006

5340-66-142-8167
Bow Handle

661428167
509-917: RNCC: 3 | RNVC: 2
999/4/42556/394: RNCC: 3 | RNVC: 2
509-917: RNCC: 5 | RNVC: 2

27 Nov 1996

5340-66-146-3721
Mounting Plate

661463721
73127-3-06: RNCC: 3 | RNVC: 2

18 Apr 2000

5340-66-151-1353
Mounting Plate

661511353
LTA-A02-0346-01: RNCC: 3 | RNVC: 2
LTA-A02-0346: RNCC: 5 | RNVC: 2

17 Jun 2003

5340-66-089-7335
Support Bracket

660897335
3534-29S: RNCC: 3 | RNVC: 2

16 Aug 1975

5340-66-013-8923
Lever Bracket

660138923
ADE(W)2-31: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-156-1009
Access Cover

661561009
RP246302/B/29: RNCC: 3 | RNVC: 2
RP246302/B/29: RNCC: 5 | RNVC: 2

27 Aug 2007

5340-66-153-9799
Mounting Bracket

661539799
3A-500002-1-20: RNCC: 3 | RNVC: 2
3A-500004-1-20: RNCC: 3 | RNVC: 2

10 Jan 2006

5340-66-086-1852
Helical Compression Spring Retainer

660861852
RP433: RNCC: 3 | RNVC: 2

7 Apr 1975

5340-66-155-1612
Rod End Clevis

661551612
275C-0173: RNCC: 3 | RNVC: 2

19 Dec 2006

5340-66-146-1066
Loop Clamp

661461066
471 8308-07: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-66-156-9249
Dust And Moisture Seal Protective Cover

661569249
471-42634-3: RNCC: 3 | RNVC: 2
525299: RNCC: 5 | RNVC: 2

5 Jun 2008

Load More Results