What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is a Hasp Staple?

A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

Hardware, Commercial - Australia (AU)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Australia (AU) - NCB is 66

Page 18 of 29

NSN Format for Hardware, Commercial
Codified by Australia

53	40	66	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Australia (AU)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 53 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 78 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 109 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 25 Items
Holder,Spring 26 Items
What is a Compression Cup? 11 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 43 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 85 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 54 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 27 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 249 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 36 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 87 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 39 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 11 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 16 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 15 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Rim Latch? 18 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Rim Lock? 13 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 12 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 17 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 17 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 18 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 103 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 11 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 59 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 14 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 14 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Plug Button? 12 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Corrosion Preventive Anode? 27 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 78 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 268 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 88 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 70 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 36 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 40 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 41 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Plain Solid Disk? 41 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 12 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 608 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 57 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 54 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 317 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 48 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 40 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 83 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Quick Release Plunger? 17 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 65 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 24 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 14 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 22 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 49 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 19 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 151 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 15 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 444 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 128 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 42 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 53 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 25 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 201 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 33 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 133 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 42 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 54 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Strapping? 28 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 75 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Screw Thread Insert And Tool Assortment? 18 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 28 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 18 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 740 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 11 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 14 Items
What is an Antipilferage Seal? 27 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 129 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Seal Retaining Plate? 29 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 47 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1862 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 15 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 11 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 10 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 766 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 27 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 65 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 79 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 71 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 22 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 12 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 14 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 35 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 50 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 28 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 15 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 20 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 11 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 83 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 138 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 393 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 38 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 11 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 22 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
What is a Key Blank? 22 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 10 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 114 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 11 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 20 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 12 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is a Bumper? 74 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 18 of 29

5340-66-160-7108
Butt Hinge

661607108
15016401: RNCC: 3 | RNVC: 2

5 Nov 2012

5340-66-147-5666
Insert And Tool Ass

5340-66-104-6737
Mounting Bracket

5340-66-156-5070
Seal Retaining Plate

661565070
471-62806-100: RNCC: 3 | RNVC: 2
502718: RNCC: 5 | RNVC: 2

13 Dec 2007

5340-66-156-3818
Mounting Plate

661563818
DE252890001: RNCC: 3 | RNVC: 2

14 Nov 2007

5340-66-157-5856
Block Clamp

661575856
C05254: RNCC: 3 | RNVC: 2

15 Jan 2009

5340-66-150-4042
Strapping

661504042
NO PRIMARY REF 66-150-4042: RNCC: 3 | RNVC: 2
05667011: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-142-8985
Electronic Equipment Hardware Kit

661428985
MX-F243: RNCC: 3 | RNVC: 2
DE530020037: RNCC: 3 | RNVC: 2

7 Feb 1997

5340-66-021-7349
Turnbuckle Body

660217349
854567R1: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-161-2006
Access Cover

661612006
161175: RNCC: 3 | RNVC: 2
HM-161175: RNCC: 5 | RNVC: 2

22 Jul 2013

5340-66-155-4231
Mounting Actuator Plate

661554231
211472-10015: RNCC: 3 | RNVC: 2
211311-10015: RNCC: 5 | RNVC: 2

26 Mar 2007

5340-66-140-5261
Turnbuckle

661405261
AS 2319: RNCC: 3 | RNVC: 1
TOJ50: RNCC: 3 | RNVC: 1

8 Mar 1995

5340-66-136-3385
Retaining Clip

661363385
014.040.00: RNCC: 3 | RNVC: 2

3 Sep 1992

5340-66-088-9268
Angle Bracket

660889268
816938-1: RNCC: 3 | RNVC: 2

27 Jun 1975

5340-66-075-4252
Double Angle Bracket

660754252
RANTE2799-5: RNCC: 3 | RNVC: 2

25 Jul 1974

5340-66-038-4186
Castable Refra Twig

660384186
MGB-3-116: RNCC: 3 | RNVC: 1

17 Feb 1971

5340-66-151-8694
Lever Bracket

661518694
LTA-A08-044-001: RNCC: 3 | RNVC: 2

3 Nov 2003

5340-66-148-5533
Tap Assembly Comple

661485533
90502: RNCC: 3 | RNVC: 2

12 Jul 2002

5340-66-161-1349
Mounting Plate

661611349
RP254813: RNCC: 3 | RNVC: 2
RP254913: RNCC: 5 | RNVC: 2

26 Jun 2013

5340-66-143-2780
Webbing Strap

661432780
8001-0007: RNCC: 3 | RNVC: 2

3 Apr 1998

5340-66-149-5673
Nalclip Dispenser

661495673
NO PRIMARY REF 66-149-5673: RNCC: 3 | RNVC: 2
45702: RNCC: 5 | RNVC: 2

7 Apr 2003

5340-66-019-5761
Hinged Hasp

660195761
WELD0M3540: RNCC: 3 | RNVC: 1
WELDOM 910/90: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-145-2772
7 Inch Scrap Ring

661452772
00-292122: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-66-152-3196
Mounting Bracket

661523196
12432111PT: RNCC: 3 | RNVC: 2

21 Aug 2004

5340-66-158-2686
General Purpose Access Door

661582686
JYG0839: RNCC: 3 | RNVC: 2

20 Oct 2009

5340-66-141-6248
Retaining Strap

661416248
658/1/06022/002: RNCC: 3 | RNVC: 2

27 Jun 1997

5340-66-154-6179
Runner

661546179
471-50806-151: RNCC: 3 | RNVC: 2
509643: RNCC: 5 | RNVC: 2

25 Jul 2006

5340-66-119-8449
02 Controller Cap

661198449
PD672-94: RNCC: 3 | RNVC: 2

13 Jan 1984

5340-66-044-7453
Rod End Clevis

5340-66-026-2723
Spring Tension Clip

5340-66-017-9365
Butt Hinge

660179365
WELDOM 838-70MM: RNCC: 3 | RNVC: 2
8388: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-150-0777
Expansion Shield

661500777
NO PRIMARY REF 66-150-0777: RNCC: 3 | RNVC: 2
01794603: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-150-0497
Tee Hinge

661500497
NO PRIMARY REF 66-150-0497: RNCC: 3 | RNVC: 2
03090211: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-158-9101
General Purpose Resilient Mount

661589101
AU-1248-55-C: RNCC: 3 | RNVC: 2
P0006419: RNCC: 5 | RNVC: 2

18 Oct 2010

5340-66-094-5537
Rod End Clevis

660945537
1B3B32-83: RNCC: 3 | RNVC: 2

17 Apr 1977

5340-66-146-7806
Support Foot

661467806
MB AB2 6200: RNCC: 3 | RNVC: 2

18 Sep 2000

5340-66-082-6601
Spring Tension Clip

5340-66-151-7840
Access Cover

661517840
AZ109M2: RNCC: 3 | RNVC: 2

20 Mar 2004

5340-66-094-0165
Mounting Bracket

660940165
2404: RNCC: 3 | RNVC: 2

17 Apr 1977

5340-66-149-7141
Permanent Magnet

661497141
NO PRIMARY REF 66-149-7141: RNCC: 3 | RNVC: 2
06957403: RNCC: 5 | RNVC: 2

10 Apr 2003

5340-66-147-9417
Male Camlock To Hos

661479417
AE080: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-66-066-4242
Corner Brace

660664242
177098K: RNCC: 3 | RNVC: 2

27 Feb 1974

5340-66-158-6350
Angle Bracket

661586350
AYG2682: RNCC: 3 | RNVC: 2

3 May 2010

5340-66-102-0328
Angle Bracket

5340-66-086-8620
Handle Grip

5340-66-033-2786
Rod End Clevis

5340-66-034-5712
Dropside Hinge

5340-66-138-9492
Access Cover

661389492
YA 4356160036: RNCC: 3 | RNVC: 2

30 Nov 1993

5340-66-014-3974
Spring Tension Clip

5340-66-107-5017
Locking Peg

661075017
01H257-53: RNCC: 3 | RNVC: 2

4 Aug 1980

5340-66-122-8792
Access Cover

661228792
DE580020443: RNCC: 3 | RNVC: 2

4 Jun 1985

5340-66-160-3878
Mounting Plate

661603878
ID32-119: RNCC: 3 | RNVC: 2

4 Jul 2012

5340-66-156-5288
General Purpose Access Door

661565288
HLA-A19-2000-01: RNCC: 3 | RNVC: 2

18 Dec 2007

5340-66-060-8348
Compression Cup

660608348
M6M12-11-6: RNCC: 3 | RNVC: 2

19 Mar 1974

5340-66-159-5927
Butt Hinge

661595927
0855/001: RNCC: 3 | RNVC: 2

19 Oct 2011

5340-66-144-4945
Mounting Bracket

661444945
733HAR067: RNCC: 3 | RNVC: 2

20 Nov 1998

5340-66-152-5942
Dust And Moisture Seal Protective Cover

661525942
112110035: RNCC: 3 | RNVC: 2

7 Dec 2004

5340-66-161-1587
Access Cover

661611587
15017966: RNCC: 3 | RNVC: 2

9 Jul 2013

5340-66-158-8148
Lock Key

661588148
1089 9068 01: RNCC: 3 | RNVC: 2

11 Aug 2010

5340-66-153-3511
Clip Assortment

661533511
CA 1745: RNCC: 3 | RNVC: 2

21 Jul 2005

5340-66-161-2853
Mounting Bracket

661612853
15018660: RNCC: 3 | RNVC: 2

21 Aug 2013

5340-66-154-6971
Mounting Plate

661546971
DE252580027: RNCC: 3 | RNVC: 2

15 Aug 2006

5340-66-144-6174
Webbing Strap

661446174
11-240545B-200: RNCC: 3 | RNVC: 2

13 Jan 1999

5340-66-028-8748
Spring

660288748
PGF268: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-131-6685
Mounting Bracket

661316685
A62-3299-K-2013: RNCC: 3 | RNVC: 2
REA623299K2013: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-66-155-7255
Double Angle Bracket

661557255
X50MK31B: RNCC: 3 | RNVC: 2

16 May 2007

5340-66-158-2242
Mounting Bracket

661582242
K11477-266: RNCC: 3 | RNVC: 2

2 Oct 2009

5340-66-106-4077
Handwheel

661064077
C0005-26: RNCC: 3 | RNVC: 2

14 Jul 1980

5340-66-149-0019
Buckle

661490019
5340-054: RNCC: 3 | RNVC: 1
5340-054: RNCC: 3 | RNVC: 1
DEF(AUST)2010: RNCC: 4 | RNVC: 1

5 Sep 2002

5340-66-101-5137
Dust And Moisture Seal Boot

661015137
MS4: RNCC: 3 | RNVC: 1
R88930: RNCC: 3 | RNVC: 2
RR9407: RNCC: 3 | RNVC: 2

4 Nov 1979

5340-66-143-3341
Mounting Bracket

661433341
141921: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-66-139-8353
General Purpose Resilient Mount

661398353
WD1426/15: RNCC: 3 | RNVC: 2
GB530-NR3-M20-FM-0: RNCC: 3 | RNVC: 2
WD1425/15: RNCC: 3 | RNVC: 2
WD1431/15: RNCC: 3 | RNVC: 2

29 Aug 1994

5340-66-153-4627
Door Stop

661534627
HAL 4/82: RNCC: 3 | RNVC: 2
HAL 4/82: RNCC: 5 | RNVC: 2

24 Aug 2005

5340-66-154-8806
Mounting Plate

661548806
3000-1358-00-82: RNCC: 3 | RNVC: 2

27 Sep 2006

5340-66-155-5615
Angle Bracket

661555615
471-30205-301: RNCC: 3 | RNVC: 2
507051: RNCC: 5 | RNVC: 2

16 Apr 2007

5340-66-160-9422
Mounting Bracket

661609422
DE252930007: RNCC: 3 | RNVC: 2

18 Mar 2013

5340-66-146-9318
Cock

661469318
RD7: RNCC: 3 | RNVC: 2

10 Oct 2000

5340-66-066-4259
Corner Brace

660664259
179413K: RNCC: 3 | RNVC: 2

27 Feb 1974

5340-66-145-2768
Lower Housing

661452768
00-289008: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-66-138-8254
Clamping Catch

661388254
196640-12611: RNCC: 3 | RNVC: 2

26 Apr 1994

5340-66-120-6300
Bracket Lh

661206300
950-586: RNCC: 3 | RNVC: 2

9 Aug 1984

5340-66-157-3463
General Purpose Access Door

661573463
300-4608-02: RNCC: 3 | RNVC: 2
300-4608-02: RNCC: 5 | RNVC: 2
300-4311-05: RNCC: 5 | RNVC: 9

15 Oct 2008

5340-66-141-2623
Cushioning Pad

661412623
6.166.041: RNCC: 3 | RNVC: 2

9 Nov 1995

5340-66-139-4202
Multipurpos Bracket

661394202
19533/47: RNCC: 3 | RNVC: 2
0519-90-911-3912: RNCC: C | RNVC: 1

22 Nov 1994

5340-66-140-6135
Webbing Strap

661406135
AS/NZS 4380:1996: RNCC: 3 | RNVC: 1
004-336-04: RNCC: 3 | RNVC: 2

26 Jul 1995

5340-66-152-8177
Angle Bracket

661528177
BMA-A05-0921-01: RNCC: 3 | RNVC: 2

12 Apr 2005

5340-66-142-9653
Angle Bracket

661429653
015016: RNCC: 3 | RNVC: 2
MT-F505: RNCC: 3 | RNVC: 2

14 Apr 1997

5340-66-161-1705
Angle Bracket

661611705
15013485-12: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-66-158-4596
Bow Handle

661584596
15018865: RNCC: 3 | RNVC: 2

3 Feb 2010

5340-66-156-2464
Mounting Bracket

661562464
A2100248: RNCC: 3 | RNVC: 2

2 Oct 2007

5340-66-151-6306
Manual Control Handle

661516306
NO PRIMARY REF 66-151-6306: RNCC: 3 | RNVC: 2
EO11517: RNCC: 5 | RNVC: 2

28 Aug 2003

5340-66-161-0192
Mounting Bracket

661610192
1785DG00003: RNCC: 3 | RNVC: 2

23 Apr 2013

5340-66-155-1570
Spring Tension Clip

661551570
740R: RNCC: 3 | RNVC: 2

18 Dec 2006

5340-66-158-0124
Mounting Bracket

661580124
15014986: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-66-156-3455
Spring Tension Clip

661563455
15016480-02: RNCC: 3 | RNVC: 2

2 Nov 2007

5340-66-122-6805
Rod End Clevis

661226805
84AX190: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1
745-202797: RNCC: 5 | RNVC: 2

2 Nov 1984

5340-66-148-3807
Lever Long Handle

661483807
F/2888-550-033C: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-033C: RNCC: 5 | RNVC: 2

25 Feb 2002

5340-66-150-1406
Earplugs Maxlite Di

661501406
NO PRIMARY REF 66-150-1406: RNCC: 3 | RNVC: 2
00959072: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-068-0374
Loop Clamp

660680374
H165A: RNCC: 3 | RNVC: 2

11 Jul 1974

5340-66-056-4350
General Purpose Resilient Mount

660564350
KA24538: RNCC: 3 | RNVC: 2

2 Feb 1973

5340-66-147-2443
Ring

661472443
001/405/GMOWS.3030.07: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-66-112-3267
Access Cover

661123267
21642: RNCC: 3 | RNVC: 2
G12.00.06.0011: RNCC: C | RNVC: 1

21 Aug 1991

5340-66-148-4765
Mounting Bracket

661484765
OED 1638: RNCC: 3 | RNVC: 2

13 May 2002

5340-66-139-5459
Mounting Plate

661395459
RA-HD-001: RNCC: 3 | RNVC: 2

7 Jun 1994

5340-66-037-6689
General Purpose Resilient Mount

660376689
981-099-275-23: RNCC: 3 | RNVC: 2
M169: RNCC: 3 | RNVC: 2

11 Nov 1970

5340-66-154-6101
Facia Panel Assembl

661546101
008-02001-001: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-66-147-2726
Foot

661472726
DWP127: RNCC: 3 | RNVC: 2

20 Dec 2000

5340-66-155-1554
Webbing Strap

661551554
17446510: RNCC: 1 | RNVC: 2
BATTERY CHARGER STRAP: RNCC: 3 | RNVC: 2
17446510: RNCC: 5 | RNVC: 2

18 Dec 2006

5340-66-135-5115
Retaining Clip

661355115
014.040.99: RNCC: 3 | RNVC: 2
014.040.99: RNCC: 3 | RNVC: 2

14 Feb 1992

5340-66-127-5613
Dust And Moisture Seal Protective Cap

661275613
03680906: RNCC: 3 | RNVC: 2

9 Oct 1986

5340-66-127-8429
Retaining Strap

661278429
EX20032283: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-66-032-5366
Handle

660325366
99862LL2RHH: RNCC: 3 | RNVC: 2

30 May 1969

5340-66-044-6203
Retaining Strap

660446203
H2243: RNCC: 3 | RNVC: 2

17 Dec 1971

5340-66-135-9968
Loop Clamp

661359968
AEE0407: RNCC: 3 | RNVC: 2

13 Mar 1992

5340-66-160-2390
Bumper

661602390
BM050161: RNCC: 3 | RNVC: 2

7 May 2012

5340-66-029-8757
Shipping Plug

660298757
PK264: RNCC: 3 | RNVC: 2

16 Oct 1968

5340-66-133-7169
Webbing Strap

661337169
6479-516-004A: RNCC: 3 | RNVC: 2

30 Mar 1990

5340-66-016-0273
Support Hook

660160273
TR217: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-157-5183
Angle Bracket

661575183
V05-04-01-01-06: RNCC: 3 | RNVC: 2

9 Dec 2008

5340-66-143-6404
Electronic Equipment Hardware Kit

661436404
DE530020043: RNCC: 3 | RNVC: 2
MX-F334: RNCC: 3 | RNVC: 2

7 Oct 1997

5340-66-158-7265
Mounting Plate

661587265
CVT-RCU-PMV-002: RNCC: 3 | RNVC: 2

1 Jul 2010

5340-66-026-8858
Spring

660268858
10-32326: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

1 Jan 1968

5340-66-151-0905
Access Door Hinge

661510905
DE251360001: RNCC: 3 | RNVC: 2

6 Jun 2003

5340-66-128-6516
Leather Strap

661286516
02200: RNCC: 3 | RNVC: 2

18 May 1993

5340-66-125-3308
General Purpose Access Door

661253308
DE580160626: RNCC: 3 | RNVC: 2

18 Mar 1986

5340-66-152-4260
Dust And Moisture Seal Protective Cap

661524260
DE102000000: RNCC: 3 | RNVC: 1
L-13X: RNCC: 3 | RNVC: 2

23 Nov 2004

5340-66-156-3863
Mounting Bracket

661563863
15012719: RNCC: 3 | RNVC: 2

15 Nov 2007

5340-66-154-8064
Metallic Solid Wheel

661548064
471-60801-126: RNCC: 3 | RNVC: 2
506696: RNCC: 5 | RNVC: 2

8 Sep 2006

5340-66-142-9700
Radio Mounting Pad

661429700
DE250530397: RNCC: 3 | RNVC: 2

1 May 1997

5340-66-045-2948
Buckle

5340-66-045-2947
Buckle

5340-66-161-2664
Spring Tension Clip

661612664
1000-07-0101A1: RNCC: 3 | RNVC: 2
QVRL1000070101A1: RNCC: 5 | RNVC: 2

12 Aug 2013

5340-66-123-5327
Hook Stowage Plate

661235327
750-05.2200-23: RNCC: 3 | RNVC: 2
750-05.2200-23: RNCC: 5 | RNVC: 2
750-05.2200-23: RNCC: 5 | RNVC: 9

2 Mar 1998

5340-66-074-2630
Doorstop

660742630
CENTREPLATEBUFFER: RNCC: 3 | RNVC: 1

1 Sep 1974

5340-66-160-2388
Dust And Moisture Seal Protective Plug

661602388
BM000178: RNCC: 3 | RNVC: 2
SQIR-5906: RNCC: 5 | RNVC: 2

7 May 2012

5340-66-150-0668
Padlock

661500668
NO PRIMARY REF 66-150-0668: RNCC: 3 | RNVC: 2
03381239: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-157-6142
Mounting Bracket

661576142
AM07013-1: RNCC: 3 | RNVC: 2

21 Jan 2009

5340-66-150-0209
Rigid Caster

661500209
NO PRIMARY REF 66-150-0209: RNCC: 3 | RNVC: 2
00433466: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-130-1541
Access Cover

661301541
20163: RNCC: 3 | RNVC: 2

28 Oct 1987

5340-66-139-2069
Mounting Bracket

661392069
YA4355400173: RNCC: 3 | RNVC: 2

9 Jun 1994

5340-66-093-2630
Bail Handle

5340-66-151-8054
Mounting Plate

661518054
238698790000: RNCC: 3 | RNVC: 1
238698790000: RNCC: 3 | RNVC: 2

30 Apr 2004

5340-66-145-2748
Shredder Ring

661452748
00-201227: RNCC: 3 | RNVC: 2

8 Sep 1999

5340-66-152-8053
Mounting Bracket

661528053
ECMA 0603: RNCC: 3 | RNVC: 2

22 Mar 2005

5340-66-144-6495
Mounting Bracket

661446495
008-983: RNCC: 3 | RNVC: 2
GYD983: RNCC: 5 | RNVC: 2

16 Feb 1999

5340-66-152-6804
Mounting Plate

661526804
ADF-1-A3-4-7: RNCC: 3 | RNVC: 2

11 Mar 2005

5340-66-144-4120
Door Viewer

661444120
WS9-CH: RNCC: 3 | RNVC: 2

9 Sep 1998

5340-66-150-2471
Hasp Staple

661502471
NO PRIMARY REF 66-150-2471: RNCC: 3 | RNVC: 2
04061003: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-072-5012
Butt Hinge

660725012
B24.32: RNCC: 3 | RNVC: 2

25 Jun 1974

5340-66-160-0687
Mounting Bracket

661600687
471-20207-520TO1: RNCC: 3 | RNVC: 2

26 Mar 2012

5340-66-158-2791
Catch Strike

661582791
BDI 30400-1-24: RNCC: 3 | RNVC: 2

22 Oct 2009

5340-66-156-2121
Manual Control Lever

661562121
319-3781: RNCC: 3 | RNVC: 2
15012627: RNCC: 5 | RNVC: 2

25 Sep 2007

5340-66-108-8632
Clamp Assembly

661088632
GC1B: RNCC: 3 | RNVC: 2

23 Jan 1982

5340-66-152-5630
Regulator Lever

661525630
360209A: RNCC: 3 | RNVC: 2

5 Nov 2004

5340-66-153-2657
Mounting Bracket

661532657
A210 0282: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-154-8206
Access Cover

661548206
15007954: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-66-150-0651
Padlock

661500651
NO PRIMARY REF 66-150-0651: RNCC: 3 | RNVC: 2
03384265: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-154-5181
Access Cover

661545181
DE252130196: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-66-164-7820

5340-66-039-2294
Angle Bracket

660392294
AH9: RNCC: 3 | RNVC: 2

7 Apr 1971

5340-66-049-2624
Dust And Moisture Seal Protective Cap

660492624
CE30103: RNCC: 3 | RNVC: 2
206497: RNCC: 5 | RNVC: 9

19 Apr 1972

5340-66-154-0288
Clamp Shell

661540288
100533: RNCC: 3 | RNVC: 2

30 Jan 2006

5340-66-138-8195
Mounting Bracket

661388195
196640-02111-1: RNCC: 3 | RNVC: 2

21 Apr 1994

5340-66-126-4025
Handwheel

661264025
62-70: RNCC: 3 | RNVC: 1

5 Mar 1991

5340-66-152-3793
Lock-Release Lever

661523793
E5-2-115-101: RNCC: 3 | RNVC: 2
DF01-601-3: RNCC: 3 | RNVC: 2

9 Oct 2004

5340-66-164-8056

5340-66-027-6117
Mounting Bracket

660276117
HPM141W: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-155-4708
Webbing Strap

661554708
BME-A05-1479-01: RNCC: 3 | RNVC: 2

29 Mar 2007

5340-66-159-2863
Mounting Plate

661592863
MCP-1041-002-1: RNCC: 3 | RNVC: 2

20 May 2011

5340-66-087-6640
Padlock

660876640
243B: RNCC: 3 | RNVC: 2
243B: RNCC: 5 | RNVC: 2

20 Apr 1975

5340-66-157-4659
Angle Bracket

661574659
ATS138009: RNCC: 3 | RNVC: 2

26 Nov 2008

5340-66-143-3614
Tube

661433614
142197: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-66-122-7560
Webbing Strap

661227560
SCES16610 ITEM 8: RNCC: 3 | RNVC: 2

26 Apr 1985

5340-66-154-9598
Electronic Equipment Hardware Kit

661549598
SCES13938: RNCC: 3 | RNVC: 2

23 Oct 2006

5340-66-135-7017
Manual Control Handle

661357017
7LS-26100-00: RNCC: 3 | RNVC: 2

2 Jan 1992

5340-66-159-2629
Webbing Strap

661592629
240517A-40: RNCC: 3 | RNVC: 2

9 May 2011

5340-66-013-1017

5340-66-158-6310
Louver Assembly

661586310
K939091750: RNCC: 3 | RNVC: 2

29 Apr 2010

5340-66-153-3102
Mounting Bracket

661533102
DE252190013: RNCC: 3 | RNVC: 2

11 Jul 2005

5340-66-154-0311
Manipulator Cover

661540311
101125: RNCC: 3 | RNVC: 2

31 Jan 2006

5340-66-156-4987
Stand Base

661564987
DA 006: RNCC: 3 | RNVC: 2

12 Dec 2007

5340-66-128-3908
Dust And Moisture Seal Boot

661283908
A26956: RNCC: 3 | RNVC: 2

8 May 1987

5340-66-159-5618
Retaining Strap

661595618
825436: RNCC: 3 | RNVC: 2
825436: RNCC: 5 | RNVC: 2

22 Sep 2011

5340-66-012-5828
Anchor Special Bolt

5340-66-036-4176
Angle Bracket

660364176
30-53328: RNCC: 3 | RNVC: 2

22 Jul 1970

5340-66-159-1344
Magnetic Catch

661591344
LBC 02-12: RNCC: 3 | RNVC: 2

4 Mar 2011

5340-66-028-9540
Electronic Equipment Hardware Kit

660289540
ADE(W)67-1701: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-120-9463

5340-66-090-7401
Angle Bracket

5340-66-122-4410
Spring Tension Clip

5340-66-148-2463
Mounting Bracket

661482463
437 551 25 40: RNCC: 3 | RNVC: 2

12 Apr 2002

5340-66-132-7396
Extens Drawer Slide

5340-66-098-1090

5340-66-140-5455
Electronic Equipment Hardware Kit

661405455
MX-F226: RNCC: 3 | RNVC: 2
DE530020006: RNCC: 3 | RNVC: 2

8 Jun 1995

5340-66-160-7352
Threaded Rod End

661607352
45660-20541-71: RNCC: 3 | RNVC: 2
45660-20541-71: RNCC: 5 | RNVC: 2

20 Nov 2012

5340-66-158-9255
Spacing Threaded Standoff

661589255
TF01920-1: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-66-144-6061
Webbing Strap

661446061
AS/NZS 4380:1996: RNCC: 3 | RNVC: 1
00-240316A-50: RNCC: 3 | RNVC: 2
11-240316A-50: RNCC: 3 | RNVC: 2
11-240316A-50: RNCC: 3 | RNVC: 2

15 Dec 1998

5340-66-161-2496
Retaining Band

661612496
VOH400-35Z: RNCC: 3 | RNVC: 2

7 Aug 2013

5340-66-161-0502
Butt Hinge

661610502
HINGE-B15: RNCC: 3 | RNVC: 2

3 May 2013

5340-66-110-0364
Antipilferage Seal

661100364
AGF 2039: RNCC: 3 | RNVC: 2

19 Oct 1983

5340-66-138-7055
Loop Clamp

661387055
120270-59300: RNCC: 3 | RNVC: 2

23 Mar 1994

5340-66-142-5778
Access Cover

661425778
5184459: RNCC: 3 | RNVC: 2

30 Oct 1996

5340-66-017-9822
Dust And Moisture Seal Protective Cap

660179822
H14859-2M: RNCC: 2 | RNVC: 2
CA30091-383: RNCC: 3 | RNVC: 2
GS195-2: RNCC: 3 | RNVC: 2
812429-8: RNCC: C | RNVC: 1

18 Dec 1960

5340-66-023-4015
Strap Hinge

660234015
WELD0M800: RNCC: 3 | RNVC: 1
A900: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-154-9069
Access Cover

661549069
4212: RNCC: 3 | RNVC: 2

4 Oct 2006

5340-66-155-9271
Mounting Bracket

661559271
DE252480109: RNCC: 3 | RNVC: 2

29 Jun 2007

5340-66-140-3918
Snap Hook

661403918
RF6210: RNCC: 3 | RNVC: 2
RF945: RNCC: 5 | RNVC: 9

21 Mar 1995

5340-66-131-6626
Right-Hand Bracket

661316626
700/2/24624: RNCC: 3 | RNVC: 2

23 Mar 1989

5340-66-019-0275
Swivel Caster

5340-66-082-9977

5340-66-141-6114
Retaining Strap

661416114
008-265: RNCC: 3 | RNVC: 2
008-265: RNCC: 3 | RNVC: 2

25 Sep 1996

5340-66-028-0748
Electrical-Mechanical Equipment Post

660280748
ADE(V)94-287: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-156-3164
Mounting Bracket

661563164
15010853: RNCC: 3 | RNVC: 2

29 Oct 2007

5340-66-062-8434
Headless Straight Rod

660628434
TOWEL RAIL: RNCC: 3 | RNVC: 1

18 Apr 1974

5340-66-122-6424
Dust And Moist Boot

5340-66-032-2589
Access Cover

660322589
D1571: RNCC: 3 | RNVC: 2

7 Jun 1969

5340-66-157-3764
Mounting Plate

661573764
BMU-A19-3018-01: RNCC: 3 | RNVC: 2
BMU-A19-3018-01: RNCC: 5 | RNVC: 2

28 Oct 2008

5340-66-158-1661
Mounting Plate

661581661
BDI 30400-7-3P: RNCC: 3 | RNVC: 2

10 Sep 2009

5340-66-039-2196
Retaining Strap

660392196
ADE(V)184-14: RNCC: 3 | RNVC: 2

30 Apr 1971

5340-66-120-1395
Dust And Moisture Seal Protective Plug

661201395
CD901T6/A-3000: RNCC: 3 | RNVC: 2

14 Feb 1984

5340-66-089-6289

5340-66-089-5371
Mending Plate

5340-66-099-2148

5340-66-090-1211
Loop Clamp

5340-66-146-0355
Mounting Bracket

661460355
AF 910: RNCC: 3 | RNVC: 2

7 Apr 2000

5340-66-160-2621
Mechanical Stop

661602621
EPDM SHORE 70: RNCC: 3 | RNVC: 2
HSA006012: RNCC: 5 | RNVC: 2

16 May 2012

5340-66-155-9961
Angle Bracket

661559961
ARLM0589-1: RNCC: 3 | RNVC: 2

20 Jul 2007

5340-66-156-3443
Mounting Plate

661563443
15014456: RNCC: 3 | RNVC: 2

1 Nov 2007

5340-66-091-2990
Vent Plug

660912990
106C014: RNCC: 3 | RNVC: 2

24 Mar 1976

5340-66-117-6678
Hinged Hasp

661176678
7007: RNCC: 3 | RNVC: 2

28 Sep 1983

5340-66-101-3549
Loop Clamp

661013549
400-16749-5: RNCC: 3 | RNVC: 2

4 Apr 1979

5340-66-131-7619
Flush Catch

661317619
H-5000-3.064-.125: RNCC: 3 | RNVC: 2
944.51.11.101: RNCC: 3 | RNVC: 2

1 Dec 1988

5340-66-088-3756
Helical Compression Spring Retainer

660883756
RG7: RNCC: 3 | RNVC: 2

20 May 1975

5340-66-139-2953
Mounting Plate

661392953
DE250530095: RNCC: 3 | RNVC: 2

29 Aug 1994

5340-66-145-4187
Hinge Assembly Kit

661454187
HIA100BK: RNCC: 3 | RNVC: 2

10 Aug 1999

5340-66-146-1789
Seat

661461789
H70914-6-1: RNCC: 3 | RNVC: 2

11 Feb 2000

5340-66-150-7315
Manual Control Lever

661507315
0000428/4: RNCC: 3 | RNVC: 2

1 May 2003

5340-66-154-5189
Lock Key

661545189
SKU: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-66-115-1114
Access Cover

661151114
DA81473001: RNCC: 3 | RNVC: 2

7 Jul 1982

5340-66-154-2789
Mounting Bracket

661542789
BMA-A05-1156: RNCC: 3 | RNVC: 2

11 Apr 2006

5340-66-142-9797
Locking Foot

661429797
658/2/06309/000: RNCC: 3 | RNVC: 2

9 May 1997

5340-66-130-5121
Angle Bracket

661305121
DE(EMEI)69-6: RNCC: 3 | RNVC: 2

2 Aug 1988

5340-66-153-2778
Mounting Bracket

661532778
A210 0335-2: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-156-7660
Access Door Hinge

661567660
STUV-0.55.017.0: RNCC: 3 | RNVC: 2

26 Mar 2008

5340-66-134-8395
Rubber Ring

661348395
01250100: RNCC: 3 | RNVC: 2

6 Jul 1990

5340-66-139-6335
Bow Handle

661396335
56W4-S104 PC104: RNCC: 3 | RNVC: 1
56W4-S104 PC104: RNCC: 3 | RNVC: 2

13 Jul 1994

5340-66-129-9502
Clamping Catch

661299502
D121323: RNCC: 3 | RNVC: 2

12 Jun 1987

5340-66-160-7101
Double Angle Bracket

661607101
15015623: RNCC: 3 | RNVC: 2

5 Nov 2012

5340-66-130-9784
Rotary Joint Sub-As

661309784
132199-2: RNCC: 3 | RNVC: 2
132198-2: RNCC: 3 | RNVC: 2

5 Nov 1988

5340-66-160-3275
Retaining Strap

661603275
261HF20: RNCC: 3 | RNVC: 2
HSA005977: RNCC: 5 | RNVC: 2
261HF20: RNCC: 5 | RNVC: 2

8 Jun 2012

5340-66-123-5180
Mounting Bracket

661235180
10D062223: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

18 Mar 1998

5340-66-130-2802
Access Cover

661302802
MEA 1307-17: RNCC: 3 | RNVC: 2

16 Feb 1988

5340-66-150-4046
Strapping

661504046
NO PRIMARY REF 66-150-4046: RNCC: 3 | RNVC: 2
05729315: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-156-7276
Mounting Bracket

661567276
NALM00696-9: RNCC: 3 | RNVC: 2
NALM00696-9: RNCC: 5 | RNVC: 2

10 Mar 2008

5340-66-131-5757
Mounting Bracket

661315757
3285367R1: RNCC: 3 | RNVC: 2

7 Dec 1988

5340-66-153-4244
General Purpose Resilient Mount

661534244
3021119: RNCC: 3 | RNVC: 2
3021119: RNCC: 5 | RNVC: 2

16 Aug 2005

5340-66-116-5528
Retaining Strap

661165528
171GM: RNCC: 3 | RNVC: 2
171GMX: RNCC: 3 | RNVC: 2

6 Oct 1983

5340-66-161-1802
Butt Hinge

661611802
15020083: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-66-146-4133
Spacing Threaded Standoff

661464133
2138-832-A-0: RNCC: 3 | RNVC: 2

19 Apr 2000

5340-66-144-7328
Mounting Bracket

661447328
6.230.3002: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-66-131-2422
Mounting Bracket

661312422
DA88080000: RNCC: 3 | RNVC: 1

6 Aug 1988

5340-66-142-6735
Mounting Bracket

661426735
DSA-10-389-20: RNCC: 3 | RNVC: 2
DSA-10-389-20: RNCC: 3 | RNVC: 2

23 Jan 1997

5340-66-154-2463
Dust And Moisture Seal Protective Cap

661542463
4309-0037: RNCC: 3 | RNVC: 2

4 Apr 2006

5340-66-153-4215
Retaining Strap

661534215
AL05052-1: RNCC: 3 | RNVC: 2

15 Aug 2005

5340-66-120-3941
Webbing Strap

661203941
DE580180102: RNCC: 3 | RNVC: 2
AS/RB3.OD: RNCC: 5 | RNVC: 2

12 Apr 1984

5340-66-143-3668
Locating Pin

661433668
142610: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-66-029-0133
Nonmetallic Bumper

660290133
153506: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-160-4379
Loop Holder

661604379
A97-DWG-000014-01: RNCC: 3 | RNVC: 2

24 Jul 2012

5340-66-154-1273
Retaining Strap

661541273
A014: RNCC: 3 | RNVC: 2
A014: RNCC: 5 | RNVC: 2

28 Feb 2006

5340-66-041-5077
Access Cover

660415077
E113B6109: RNCC: 3 | RNVC: 2

11 Jun 1971

5340-66-037-1779
Angle Bracket

5340-66-033-7894
Rod End Connector

5340-66-033-4322
Access Door Hinge

5340-66-038-1823
Manual Contro Lever

5340-66-038-0387
Brake Rod Bracket

5340-66-131-5756
Bracket

661315756
3285361R1: RNCC: 3 | RNVC: 2

7 Dec 1988

5340-66-153-2707
Mounting Bracket

661532707
A210 0309: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-128-4794
Retaining Strap

661284794
MYH3152: RNCC: 3 | RNVC: 2

9 Dec 1987

5340-66-150-8802
General Purpose Resilient Mount

661508802
DE251240015: RNCC: 3 | RNVC: 2

27 Aug 2003

5340-66-128-5973
Webbing Strap

661285973
900218: RNCC: 3 | RNVC: 2
HYL9847: RNCC: 5 | RNVC: 2

2 Oct 1990

5340-66-155-3078
Axle Retainer

661553078
508288: RNCC: 3 | RNVC: 2

26 Feb 2007

5340-66-150-2872
Loop Clamp

661502872
NO PRIMARY REF 66-150-2872: RNCC: 3 | RNVC: 2
01029657: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-143-8708
Block Clamp

661438708
78-8073-8178-1: RNCC: 3 | RNVC: 2
TMT6190: RNCC: 3 | RNVC: 2

1 Sep 1997

5340-66-154-7980
Access Cover

661547980
6.036.131: RNCC: 3 | RNVC: 2

7 Sep 2006

5340-66-161-1682
Double Angle Bracket

661611682
15020045: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-66-147-8900
Clamping Catch

661478900
360102: RNCC: 3 | RNVC: 2

30 Nov 2001

5340-66-151-3262
Mounting Bracket

661513262
NALM00172-1: RNCC: 3 | RNVC: 2

28 Oct 2003

5340-66-156-7451
Mounting Bracket

661567451
NALM00707-1: RNCC: 3 | RNVC: 2
NALM00707-1: RNCC: 5 | RNVC: 2

17 Mar 2008

5340-66-043-7230
Hand Crank

660437230
90028-1: RNCC: 3 | RNVC: 2

8 May 1972

5340-66-065-1435
Angle Bracket

5340-66-033-7896
Rod End Connector

5340-66-045-2949
Buckle

5340-66-160-3325
Mounting Plate

661603325
BMP-A05-3015-01: RNCC: 3 | RNVC: 2

13 Jun 2012

5340-66-158-3206
Padlock

661583206
L334B45/125/6KD: RNCC: 3 | RNVC: 2

9 Nov 2009

5340-66-079-1234
Dexine Pads

5340-66-092-6339
Rod End Clevis

5340-66-155-4847
Loop Clamp

661554847
1018: RNCC: 3 | RNVC: 2
1018: RNCC: 5 | RNVC: 2

30 Mar 2007

5340-66-149-0698
Double Angle Bracket

661490698
100311C: RNCC: 3 | RNVC: 2

11 Nov 2002

5340-66-155-1306
Mounting Plate

661551306
D1401430: RNCC: 3 | RNVC: 2

11 Dec 2006

5340-66-105-6050
Strap Hinge

661056050
900: RNCC: 3 | RNVC: 1

21 Nov 1981

5340-66-128-5676
Rocker Assemb Bush

661285676
MYH3010: RNCC: 3 | RNVC: 2

14 Aug 1989

5340-66-128-2045
Hook

661282045
ME96100145: RNCC: 3 | RNVC: 2

11 Feb 1987

5340-66-146-5741
Handle

661465741
UVS-THF-1: RNCC: 3 | RNVC: 2

25 Jul 2000

5340-66-160-1447
Access Cover

661601447
RAY172007-5: RNCC: 3 | RNVC: 2

13 Apr 2012

5340-66-135-7268
Access Cover

661357268
AN4253 3015-1: RNCC: 3 | RNVC: 2

14 Jan 1992

5340-66-061-8602
Front C Road Spring

660618602
95475: RNCC: 3 | RNVC: 2

9 May 1974

5340-66-156-5604
Mounting Plate

661565604
6302311: RNCC: 3 | RNVC: 2
15012991: RNCC: 5 | RNVC: 2

16 Jan 2008

5340-66-150-0755
Expansion Shield

661500755
NO PRIMARY REF 66-150-0755: RNCC: 3 | RNVC: 2
01820603: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-139-6362
Access Cover

661396362
56W4-S105 PC34: RNCC: 3 | RNVC: 1
56W4-S105 PC34: RNCC: 3 | RNVC: 2

15 Jul 1994

5340-66-025-2597
Manual Control Lever

660252597
GEB790: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-156-0963
Angle Bracket

661560963
90450: RNCC: 3 | RNVC: 2
90450-TPL77-B12: RNCC: 3 | RNVC: 2

23 Aug 2007

5340-66-137-7230
Stand Base

661377230
1383-12/1A: RNCC: 3 | RNVC: 2

22 Mar 1993

5340-66-154-3873
Angle Bracket

661543873
AL98004-5: RNCC: 3 | RNVC: 2

10 May 2006

5340-66-120-4210
Nut And Bolt Locking Plate

661204210
408909: RNCC: 3 | RNVC: 2

3 May 1984

5340-66-144-9446
General Purpose Resilient Mount

661449446
331901: RNCC: 3 | RNVC: 2
331901: RNCC: 3 | RNVC: 2

25 Jun 1999

5340-66-020-3039
Buckle And Strap As

660203039
0116237: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-155-9890
Mechanic Equipment Hardware Kit

661559890
AG-Z040C: RNCC: 3 | RNVC: 2

19 Jul 2007

5340-66-151-3420
Mounting Plate

661513420
RAY171002-1: RNCC: 3 | RNVC: 2

23 Mar 2004

5340-66-150-0236
Swivel Caster

661500236
NO PRIMARY REF 66-150-0236: RNCC: 3 | RNVC: 2
01024856: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-157-4239
Dust And Moisture Seal Protective Cap

661574239
CP9X: RNCC: 3 | RNVC: 2
15017481: RNCC: 5 | RNVC: 2

18 Nov 2008

5340-66-021-7681
Swivel Caster

660217681
M201: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-143-1465
Dust And Moisture Seal Protective Cover

661431465
138100 16440 K 0001/18: RNCC: 3 | RNVC: 2
9051470097: RNCC: 5 | RNVC: 2

28 Jan 1998

5340-66-107-8450
Dust And Moisture Seal Protective Cap

661078450
DY1490: RNCC: 3 | RNVC: 2
5340-15-050-1569: RNCC: 6 | RNVC: 9

16 Jan 1985

5340-66-129-8581
Mounting Bracket

661298581
553.10.09.389: RNCC: 3 | RNVC: 2

3 Apr 2002

5340-66-082-9978

5340-66-104-2211
Switch Bracket

661042211
M5393-039-1: RNCC: 3 | RNVC: 2

7 Aug 1971

5340-66-134-2744
Helical Compression Spring Seat

661342744
6.012.3010: RNCC: 3 | RNVC: 2

29 Jul 1991

5340-66-160-1093
Mounting Plate

661601093
PN104128: RNCC: 3 | RNVC: 2

2 Apr 2012

5340-66-152-7381
Permanent Magnet

661527381
89016: RNCC: 3 | RNVC: 2

18 May 2005

5340-66-160-9322
Angle Bracket

661609322
AM09071-5: RNCC: 3 | RNVC: 2

13 Mar 2013

5340-66-147-7600
Ass Shell Structure

661477600
6671316-9: RNCC: 3 | RNVC: 2
6671316-9: RNCC: C | RNVC: 1

13 Aug 2001

5340-66-156-0055
Angle Bracket

661560055
ARML0914: RNCC: 3 | RNVC: 2

23 Jul 2007

5340-66-029-2537
Blanking Cover

660292537
CA30020: RNCC: 3 | RNVC: 2

16 Oct 1968

5340-66-154-7115
Mounting Plate

661547115
ARLM0853-1: RNCC: 3 | RNVC: 2

18 Aug 2006

5340-66-144-7783
Dust And Moisture Seal Protective Cap

661447783
524D01125001: RNCC: 3 | RNVC: 2
524D01125001: RNCC: 5 | RNVC: 2

2 Mar 1999

5340-66-156-2904
Mounting Plate

661562904
15001809: RNCC: 3 | RNVC: 2

24 Oct 2007

5340-66-112-3278
Access Cover

661123278
21676: RNCC: 3 | RNVC: 2

3 Jul 1991

5340-66-153-2693
Mounting Bracket

661532693
A210 0080: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-146-3531
Locating Pin

661463531
240559B: RNCC: 3 | RNVC: 2

13 Apr 2000

5340-66-156-2545
Butt Hinge Leaf

661562545
A2100203: RNCC: 3 | RNVC: 2

8 Oct 2007

5340-66-154-7477
Mounting Plate

661547477
15002249: RNCC: 3 | RNVC: 2

28 Aug 2006

5340-66-023-7744
Rim Lock

660237744
600S78: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-144-6059
Webbing Strap

661446059
11-240317A-30G: RNCC: 3 | RNVC: 2

15 Dec 1998

5340-66-140-6414
Pad Eye

661406414
G35 DZ817: RNCC: 3 | RNVC: 2

14 Jun 1995

5340-66-141-5486
Mounting Bracket

661415486
DE250530363: RNCC: 3 | RNVC: 2
DE2505030363: RNCC: 3 | RNVC: 2

26 Jun 1996

5340-66-159-5605
Mounting Bracket

661595605
825548: RNCC: 3 | RNVC: 2
825548: RNCC: 5 | RNVC: 2

21 Sep 2011

5340-66-157-7548
Mounting Bracket

661577548
BYG4524: RNCC: 3 | RNVC: 2

13 Mar 2009

5340-66-137-4302
Front Dress Panel

661374302
301AMR114-1: RNCC: 3 | RNVC: 2

6 Jan 1993

5340-66-038-8418
Spring Tension Clip

660388418
SIZE H: RNCC: 3 | RNVC: 2

19 Feb 1971

5340-66-137-2778
Spacing Threaded Standoff

661372778
E.8471: RNCC: 3 | RNVC: 2

28 Oct 1992

5340-66-147-2198
Coalescer Housing A

661472198
000/301/GMOWS.3030.03: RNCC: 3 | RNVC: 2

24 Nov 2000

5340-66-146-3516
Strap

661463516
240503B-60: RNCC: 3 | RNVC: 2
240503B-60: RNCC: 5 | RNVC: 2

12 Apr 2000

5340-66-141-6003
Electronic Equipment Hardware Kit

661416003
MX-F323: RNCC: 3 | RNVC: 2
DE530020032: RNCC: 3 | RNVC: 2
DE530020032: RNCC: 3 | RNVC: 2

15 Oct 1996

5340-66-155-5931
Mounting Actuator Plate

661555931
954237: RNCC: 3 | RNVC: 2

20 Apr 2007

5340-66-156-3305
Mounting Bracket

661563305
15014138: RNCC: 3 | RNVC: 2

31 Oct 2007

5340-66-122-6054
Webbing Strap

5340-66-154-6885
Helical Compression Spring Retainer

661546885
VTR251-2TSUB14F4T19-7IIINM40W3P-: RNCC: 3 | RNVC: 1

14 Aug 2006

5340-66-156-8174
Mounting Plate

661568174
471-90422-208: RNCC: 3 | RNVC: 2
523993: RNCC: 5 | RNVC: 2

24 Apr 2008

5340-66-129-7946
Angle Bracket

661297946
DA73266005: RNCC: 3 | RNVC: 2

18 Sep 2000

5340-66-157-6312
Mounting Bracket

661576312
DE253280049: RNCC: 3 | RNVC: 2

23 Jan 2009

5340-66-109-7221
General Purpose Access Door

661097221
79222: RNCC: 3 | RNVC: 2

27 Jun 1984

5340-66-043-0020
Door Top Closure

660430020
AH114: RNCC: 3 | RNVC: 2

9 Jul 1971

5340-66-153-4793
Support

661534793
1013210067: RNCC: 3 | RNVC: 2
1013210067: RNCC: 5 | RNVC: 2

25 Aug 2005

5340-66-120-5373
Latch

661205373
3QM213: RNCC: 3 | RNVC: 2

20 Jun 1984

5340-66-154-8231
Release Fork

661548231
15007935: RNCC: 3 | RNVC: 2

13 Sep 2006

5340-66-157-1443
Corrosion Preventive Anode

661571443
AG-Z020B: RNCC: 3 | RNVC: 2

14 Aug 2008

5340-66-154-0945
Mounting Plate

661540945
557.22.09.414: RNCC: 3 | RNVC: 2

21 Feb 2006

5340-66-146-7009
Spring Tension Clip

661467009
1405654: RNCC: 3 | RNVC: 2

15 Aug 2000

5340-66-147-2676
Roller

661472676
927082: RNCC: 3 | RNVC: 2
DNR1: RNCC: 3 | RNVC: 9

15 Dec 2000

5340-66-147-0979
Electronic Equipment Hardware Kit

661470979
DE250980214: RNCC: 3 | RNVC: 2
DE250980214: RNCC: 3 | RNVC: 2

5 Feb 2001

5340-66-144-8020
Clamp Bolt Assembly

661448020
35-30005-5: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-66-156-5385
Mounting Plate

661565385
31-80-00534-00: RNCC: 3 | RNVC: 2

8 Jan 2008

5340-66-155-1054
Angle Bracket

661551054
RAY171000-11: RNCC: 3 | RNVC: 2

5 Dec 2006

5340-66-126-3069
Rod End Clevis

661263069
76028: RNCC: 3 | RNVC: 2

23 Jan 1991

5340-66-158-5717
General Purpose Guard Rail Section

661585717
SE13806: RNCC: 3 | RNVC: 2
SE13806: RNCC: 5 | RNVC: 2

29 Mar 2010

5340-66-147-2302
Access Cover

661472302
000/342/GMOWS.3030.05: RNCC: 3 | RNVC: 2

27 Nov 2000

5340-66-147-2542
Cover

661472542
929041: RNCC: 3 | RNVC: 2
CWC1: RNCC: 3 | RNVC: 2

11 Dec 2000

5340-66-152-5012
General Purpose Access Door

661525012
12755515: RNCC: 3 | RNVC: 2

22 Feb 2005

5340-66-142-9705
Mounting Bracket

661429705
015006: RNCC: 3 | RNVC: 2

1 May 1997

5340-66-149-7160
Turnbuckle

661497160
NO PRIMARY REF 66-149-7160: RNCC: 3 | RNVC: 2
01068712: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-151-6879
Manual Control Lever

661516879
2121358: RNCC: 3 | RNVC: 2
2121358: RNCC: 3 | RNVC: 2

13 Nov 2003

5340-66-157-9153
Access Hole Frame

661579153
557.22.09.172: RNCC: 3 | RNVC: 2

15 May 2009

5340-66-094-8987
Access Cover

660948987
C27803B: RNCC: 3 | RNVC: 2

30 Jun 1977

5340-66-126-6525
Mounting Bracket

661266525
0313582: RNCC: 3 | RNVC: 2

27 May 1991

5340-66-074-8546
Dust And Moisture Seal Protective Cap

660748546
RANTE2172: RNCC: 3 | RNVC: 2

25 Jun 1974

5340-66-156-0351
Access Cover

661560351
ARLM0913-1: RNCC: 3 | RNVC: 2

1 Aug 2007

5340-66-148-3693
Manual Control Lever

661483693
HH 269: RNCC: 3 | RNVC: 2
Q PAL HH 269: RNCC: 5 | RNVC: 2
HH 269: RNCC: 5 | RNVC: 2

21 Feb 2002

5340-66-143-9591
Mounting Bracket

661439591
A6196110-1: RNCC: 3 | RNVC: 2

4 Dec 1997

5340-66-157-7560
Locking L Parts Kit

661577560
P10153: RNCC: 3 | RNVC: 2

16 Mar 2009

5340-66-161-1776
Mounting Bracket

661611776
15020218: RNCC: 3 | RNVC: 2

15 Jul 2013

5340-66-141-3872
Access Cover

661413872
A30070: RNCC: 3 | RNVC: 2

12 May 1995

5340-66-153-4293
Mounting Bracket

661534293
BM080048: RNCC: 3 | RNVC: 2

18 Aug 2005

5340-66-154-0911
Dust And Moisture Seal Protective Cover

661540911
DE252430000: RNCC: 3 | RNVC: 2

20 Feb 2006

5340-66-014-3340
Key Blank

5340-66-157-4191
Access Cover

661574191
471-51805-147: RNCC: 3 | RNVC: 2
525410: RNCC: 5 | RNVC: 2

14 Nov 2008

5340-66-148-3998
Insert

661483998
M48-0012D01: RNCC: 3 | RNVC: 2
1520802: RNCC: 5 | RNVC: 2

15 Mar 2002

5340-66-156-2647
Handwheel

661562647
471-90429-600T01: RNCC: 3 | RNVC: 2
522133: RNCC: 5 | RNVC: 2

11 Oct 2007

5340-66-142-6410
Dust And Moisture Seal Protective Cap

661426410
BOTTLE COVER: RNCC: 3 | RNVC: 2

14 Dec 1996

5340-66-060-8159
Dust And Moisture Seal Protective Cap-Plug

660608159
15CP: RNCC: 3 | RNVC: 2

6 Mar 1974

5340-66-147-2749
Fitting

661472749
DZR257: RNCC: 3 | RNVC: 2

21 Dec 2000

5340-66-146-1962
Mounting Bracket

661461962
472 7392-01: RNCC: 3 | RNVC: 2

10 Feb 2000

5340-66-150-3931
Butt Hinge

661503931
NO PRIMARY REF 66-150-3931: RNCC: 3 | RNVC: 2
04083405: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-137-3512
Anchor Block

661373512
26-08151: RNCC: 3 | RNVC: 2
A000565 SHT 44: RNCC: 3 | RNVC: 2

16 Dec 1992

5340-66-154-8520
Blank Panel

661548520
15010478-08: RNCC: 3 | RNVC: 2

19 Sep 2006

5340-66-155-8529
Runner

661558529
471-40204-155: RNCC: 3 | RNVC: 2
514991: RNCC: 5 | RNVC: 2

18 Jun 2007

5340-66-155-6733
Bumper

661556733
0801: RNCC: 3 | RNVC: 2
1220299: RNCC: 5 | RNVC: 2

7 May 2007

5340-66-153-2708
Mounting Bracket

661532708
A210 0313: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-093-1315
Safe Safety Release

660931315
K56RSAFETYRELEASE: RNCC: 3 | RNVC: 2

22 Dec 1976

5340-66-155-5961
Handwheel

661555961
P10012-18: RNCC: 3 | RNVC: 2

23 Apr 2007

5340-66-158-6783
Mounting Plate

661586783
RAY184003-7: RNCC: 3 | RNVC: 2
RAY184003-7: RNCC: 5 | RNVC: 2

1 Jun 2010

5340-66-157-9147
Mounting Plate

661579147
ARLM1198-1: RNCC: 3 | RNVC: 2

15 May 2009

5340-66-128-6051
Nonmetallic Bumper

661286051
B77: RNCC: 3 | RNVC: 2
HYM340: RNCC: 5 | RNVC: 2

13 May 1991

5340-66-158-4792
Angle Bracket

661584792
02121-040001: RNCC: 3 | RNVC: 2

12 Feb 2010

5340-66-125-2448
Webbing Strap

661252448
DE580180769-2: RNCC: 3 | RNVC: 2

21 Dec 1985

5340-66-157-4971
Mending Plate

661574971
V02-01-10-01-01: RNCC: 3 | RNVC: 2

2 Dec 2008

5340-66-150-0775
Expansion Shield

661500775
NO PRIMARY REF 66-150-0775: RNCC: 3 | RNVC: 2
01794409: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-150-0655
Padlock

661500655
NO PRIMARY REF 66-150-0655: RNCC: 3 | RNVC: 2
03381086: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-143-3610
Foot

661433610
142150: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-66-137-1820
Dust And Moisture Seal Protective Plug

661371820
10X5: RNCC: 3 | RNVC: 2

16 Sep 1992

5340-66-156-6843
Lock-Release Lever

661566843
471-90081-143: RNCC: 3 | RNVC: 2
471-90081-143: RNCC: 3 | RNVC: 2
525246: RNCC: 5 | RNVC: 2

26 Feb 2008

5340-66-142-6734
Mounting Bracket

661426734
DSA-10-389-19: RNCC: 3 | RNVC: 2
DSA-10-389-19: RNCC: 3 | RNVC: 2

23 Jan 1997

5340-66-147-9978
Protective Cap Assy

661479978
NALM00116-1: RNCC: 3 | RNVC: 2

30 May 2002

5340-66-158-8163
S Guard Rail Insert

661588163
P0000016: RNCC: 3 | RNVC: 2

11 Aug 2010

5340-66-158-5062
Bumper

661585062
C30RK16: RNCC: 3 | RNVC: 2

25 Feb 2010

5340-66-161-3660
Bumper

661613660
QASM00706-007: RNCC: 3 | RNVC: 2

25 Sep 2013

5340-66-153-2945
Mounting Plate

661532945
DE100490002: RNCC: 3 | RNVC: 2

7 Jul 2005

5340-66-156-1627
Mounting Plate

661561627
6877 2 011-04: RNCC: 3 | RNVC: 2

12 Sep 2007

5340-66-159-8434
Mounting Bracket

661598434
BHB005: RNCC: 3 | RNVC: 2

2 Mar 2012

5340-66-033-2757
Buckle

660332757
ADE(M)183-9 FEMALE: RNCC: 3 | RNVC: 2

14 Oct 1969

5340-66-153-9530
Dust And Moisture Seal Protective Cover

661539530
M0228FH-MV30-08.00 NO.3: RNCC: 3 | RNVC: 2

21 Dec 2005

5340-66-147-7927
Shim Clamp

661477927
31538: RNCC: 3 | RNVC: 2
Q EDE HYCS/31538: RNCC: 5 | RNVC: 2

24 Sep 2001

5340-66-138-8189
Mounting Bracket

661388189
196640-01031-1: RNCC: 3 | RNVC: 2

21 Apr 1994

5340-66-147-7768
Roller Gate

661477768
A5319: RNCC: 3 | RNVC: 2

11 Sep 2001

5340-66-131-6858
Door Catch

661316858
3254809R1: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-66-156-7559
General Purpose Resilient Mount

661567559
E2426: RNCC: 3 | RNVC: 2
V01-03-00-00-01: RNCC: 5 | RNVC: 2

19 Mar 2008

5340-66-145-9604
Webbing Strap

661459604
F007-32-06: RNCC: 3 | RNVC: 2

26 Oct 2001

5340-66-161-1314
Dust And Moisture Seal Boot

661611314
1101061: RNCC: 3 | RNVC: 2

25 Jun 2013

5340-66-087-2208
Handle Mounti Block

660872208
58A12B54: RNCC: 3 | RNVC: 2

7 Mar 1975

5340-66-160-2620
General Purpose Resilient Mount

661602620
D75H551217A215: RNCC: 3 | RNVC: 2
HSA006011: RNCC: 5 | RNVC: 2

16 May 2012

5340-66-141-3490
Righ Lever Assembly

661413490
527.20.09.040: RNCC: 3 | RNVC: 2

20 Jun 1995

5340-66-156-9343
Mounting Bracket

661569343
828452: RNCC: 3 | RNVC: 2

11 Jun 2008

5340-66-024-0722
Angle Bracket

660240722
ADE(W)28-39: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-131-6855
Dust And Moisture Seal Protective Cap

661316855
291068C2: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-66-150-5773
General Purpose Resilient Mount

661505773
NO PRIMARY REF 66-150-5773: RNCC: 3 | RNVC: 2
09019306: RNCC: 5 | RNVC: 2

16 Apr 2003

5340-66-155-8947
Mounting Bracket

661558947
471-60801-175: RNCC: 3 | RNVC: 2
506751: RNCC: 5 | RNVC: 2

26 Jun 2007

5340-66-102-4522
Retaining Clip

5340-66-109-6789
Double Angl Bracket

5340-66-156-4429
Webbing Strap

661564429
10006013-100: RNCC: 3 | RNVC: 2
10006013-100: RNCC: 3 | RNVC: 2
10006013-100: RNCC: 5 | RNVC: 2

27 Nov 2007

5340-66-073-6656
Manual Control Lever

660736656
MAL6-501M: RNCC: 3 | RNVC: 2

7 Aug 1974

5340-66-154-7978
Guard

661547978
471-60801-144T01: RNCC: 3 | RNVC: 2
506718: RNCC: 5 | RNVC: 2

7 Sep 2006

5340-66-091-8701
Angle Bracket

660918701
330251: RNCC: 3 | RNVC: 2

12 Jun 1976

5340-66-025-9363
Retaining Strap

660259363
EX20048224: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-128-5275
Expansion Plug

661285275
5096000140: RNCC: 3 | RNVC: 2
5096000140: RNCC: 5 | RNVC: 2

3 Dec 1988

5340-66-110-8153
Pipe Hanger

661108153
180: RNCC: 3 | RNVC: 1

6 Nov 1981

5340-66-031-7985
Panel Locking Clamp

660317985
ADE(W)67-1095 ISSUE 3: RNCC: 3 | RNVC: 2

11 Mar 1969

5340-66-146-7034
Door Foamed

661467034
1425735: RNCC: 3 | RNVC: 2

14 Aug 2000

5340-66-016-9914
Loop Clamp

5340-66-154-5814
Retaining Strap

661545814
C14536: RNCC: 3 | RNVC: 2

12 Jul 2006

5340-66-151-3331
Access Cover

661513331
NALM00411-1: RNCC: 3 | RNVC: 2

15 Jan 2004

5340-66-070-3505
Dust And Moisture Seal Protective Plug

660703505
9CP: RNCC: 3 | RNVC: 2

5 Jul 1974

5340-66-068-0468
Angle Bracket

660680468
HCFS199AU: RNCC: 3 | RNVC: 2

20 Jul 1974

5340-66-154-2632
Multiple Angle Bracket

661542632
008-155: RNCC: 3 | RNVC: 2
GYD155: RNCC: 5 | RNVC: 2

7 Apr 2006

5340-66-146-0925
Mounting Plate

661460925
471 4417-01: RNCC: 3 | RNVC: 2

18 Jan 2000

5340-66-144-6053
Webbing Strap

661446053
AS/NZS 4380:1996: RNCC: 3 | RNVC: 1
11-240549A-30: RNCC: 3 | RNVC: 2
11-240549A-30: RNCC: 3 | RNVC: 2

15 Dec 1998

5340-66-150-5054
Mounting Bracket

661505054
NO PRIMARY REF 66-150-5054: RNCC: 3 | RNVC: 2
03612405: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-147-7916
Bspt Male Air Plug

661477916
20PM-SUS: RNCC: 3 | RNVC: 2
0286 8752: RNCC: 5 | RNVC: 2
0286 8752: RNCC: 5 | RNVC: 2

6 Nov 2001

5340-66-161-0963
Sliding Door Hanger

661610963
434019C: RNCC: 3 | RNVC: 2

4 Jun 2013

5340-66-135-1304
Case Corner

661351304
99005: RNCC: 3 | RNVC: 2

15 Jul 1991

5340-66-155-1215
Seal Retaining Plate

661551215
694598: RNCC: 3 | RNVC: 2

8 Dec 2006

5340-66-144-6074
Computer Retention

661446074
00-240423A: RNCC: 3 | RNVC: 2

16 Dec 1998

5340-66-155-6406
Mounting Bracket

661556406
X50QK463M: RNCC: 3 | RNVC: 2

1 May 2007

5340-66-047-5283
Extension Drawer Slide Section

660475283
B51: RNCC: 3 | RNVC: 2

17 Mar 1972

5340-66-082-6429
Retaining Strap

5340-66-152-0144
General Purpose Resilient Mount

661520144
08-0146168: RNCC: 3 | RNVC: 2
20-0952032-23: RNCC: 3 | RNVC: 2

28 Aug 2004

5340-66-154-7783
Butt Hinge

661547783
15004476: RNCC: 3 | RNVC: 2

4 Sep 2006

5340-66-023-5210
Expansion Shield

660235210
S06: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-143-3096
Spring Screw

661433096
6 399 957: RNCC: 3 | RNVC: 2
6 399 957: RNCC: 5 | RNVC: 2

1 Apr 1998

5340-66-156-6026
Assembly Clamp

661566026
P10019-2: RNCC: 3 | RNVC: 2

4 Feb 2008

5340-66-100-3343
Lock

661003343
27000008: RNCC: 3 | RNVC: 2

9 Feb 1979

5340-66-134-1563
Head Cylinder

661341563
353 9342: RNCC: 3 | RNVC: 2

19 Jun 1991

5340-66-141-0046
Mounting Bracket

661410046
SG-B-1158: RNCC: 3 | RNVC: 2

2 Aug 1995

5340-66-148-6276
Mounting Plate

661486276
TF00822: RNCC: 3 | RNVC: 1
TF00822-1: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-66-153-4118
Mounting Plate

661534118
15012706-02: RNCC: 3 | RNVC: 2

12 Aug 2005

5340-66-154-9528
Mounting Bracket

661549528
19-2108-011: RNCC: 3 | RNVC: 2

18 Oct 2006

5340-66-159-0843
Mounting Bracket

661590843
471-RH000-114-T01: RNCC: 3 | RNVC: 2
1730125: RNCC: 5 | RNVC: 2

2 Feb 2011

5340-66-141-2067
Dust And Moisture Seal Protective Cap-Plug

661412067
471-44468-505: RNCC: 3 | RNVC: 2
514110: RNCC: 3 | RNVC: 2

23 Oct 1995

5340-66-154-4164
Dust And Moisture Seal Protective Cap-Plug

661544164
CP10: RNCC: 3 | RNVC: 2

19 May 2006

5340-66-155-0379

5340-66-044-0147
Turnbuckle

660440147
356684K: RNCC: 3 | RNVC: 2

3 Jul 1972

5340-66-118-6813
Retaining Strap

661186813
045-095: RNCC: 3 | RNVC: 2

28 Apr 1984

5340-66-151-2459
Access Cover

661512459
7FA6020A41G27: RNCC: 3 | RNVC: 2

27 Oct 2004

5340-66-153-9838
Mechanical Stop

661539838
LW130: RNCC: 3 | RNVC: 2

11 Jan 2006

5340-66-161-1959
Mounting Plate

661611959
15019403-G: RNCC: 3 | RNVC: 2

19 Jul 2013

5340-66-132-0184
Television An Stand

661320184
REV 1: RNCC: 3 | RNVC: 2

17 Mar 1989

5340-66-146-1313
Access Cover

661461313
1460584: RNCC: 3 | RNVC: 2

31 Oct 2002

5340-66-156-8667
Stand Base

661568667
P22-BSEBRZ02500AM: RNCC: 3 | RNVC: 2

12 May 2008

5340-66-141-7136
Helical Compression Spring Retainer

661417136
FE1302-080005: RNCC: 3 | RNVC: 2

19 Jan 1996

5340-66-153-2227
Webbing Strap

661532227
F1474-0005: RNCC: 3 | RNVC: 2

22 Jun 2005

5340-66-143-9537
Access Cover

661439537
C-525647: RNCC: 3 | RNVC: 2

21 Nov 1997

5340-66-153-4587
Mechanical Stop

661534587
RF1427-3: RNCC: 3 | RNVC: 2

23 Aug 2005

Load More Results