What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is a Hasp Staple?

A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

Hardware, Commercial - Australia (AU)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Australia (AU) - NCB is 66

Page 17 of 29

NSN Format for Hardware, Commercial
Codified by Australia

53	40	66	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Australia (AU)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 53 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 78 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 109 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 25 Items
Holder,Spring 26 Items
What is a Compression Cup? 11 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 43 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 85 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 54 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 27 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 249 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 36 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 87 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 39 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 11 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 16 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 15 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Rim Latch? 18 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Rim Lock? 13 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 12 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 17 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 17 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 18 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 103 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 11 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 59 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 14 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 14 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Plug Button? 12 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Corrosion Preventive Anode? 27 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 78 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 268 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 88 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 70 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 36 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 40 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 41 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Plain Solid Disk? 41 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 12 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 608 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 57 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 54 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 317 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 48 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 40 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 83 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Quick Release Plunger? 17 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 65 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 24 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 14 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 22 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 49 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 19 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 151 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 15 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 444 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 128 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 42 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 53 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 25 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 201 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 33 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 133 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 42 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 54 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Strapping? 28 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 75 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Screw Thread Insert And Tool Assortment? 18 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 28 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 18 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 740 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 11 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 14 Items
What is an Antipilferage Seal? 27 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 129 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Seal Retaining Plate? 29 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 47 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1862 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 15 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 11 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 10 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 766 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 27 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 65 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 79 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 71 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 22 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 12 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 14 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 35 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 50 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 28 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 15 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 20 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 11 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 83 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 138 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 393 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 38 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 11 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 22 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
What is a Key Blank? 22 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 10 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 114 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 11 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 20 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 12 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is a Bumper? 74 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 17 of 29

5340-66-153-3286
Mounting Bracket

661533286
RE61RWHTML060: RNCC: 3 | RNVC: 2

18 Jul 2005

5340-66-147-8436
Mounting Plate

661478436
TAS201/17/1P: RNCC: 3 | RNVC: 2
TAS201/17/1P: RNCC: 5 | RNVC: 2

5 Mar 2002

5340-66-157-8516
Mounting Plate

661578516
HYG3261: RNCC: 3 | RNVC: 2

21 Apr 2009

5340-66-136-3381
Retaining Clip

661363381
014.041.00: RNCC: 3 | RNVC: 2

3 Sep 1992

5340-66-120-4208
Nut And Bolt Locking Plate

661204208
407876: RNCC: 3 | RNVC: 2

3 May 1984

5340-66-154-6113
Locking Bracket

661546113
008-2005-001: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-66-138-9924
Polycarbonat Spacer

661389924
ADE(M)40-131 ISSUE 1: RNCC: 3 | RNVC: 2

5 Jan 1994

5340-66-147-7870
Bracket

661477870
F/2888-550-022A: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-022A: RNCC: 5 | RNVC: 2

20 Sep 2001

5340-66-147-2668
Rinse Arm

661472668
DLR839: RNCC: 3 | RNVC: 2

15 Dec 2000

5340-66-038-2600
Split Tubular Clip

660382600
NC08153-17: RNCC: 3 | RNVC: 2

4 Jan 1971

5340-66-149-7045
Padlock

661497045
NO PRIMARY REF 66-149-7045: RNCC: 3 | RNVC: 2
3381460: RNCC: 5 | RNVC: 2

8 Apr 2003

5340-66-158-9140
Rigid Caster

661589140
FB2400-04: RNCC: 3 | RNVC: 2

19 Oct 2010

5340-66-154-9495
Retaining Band

661549495
471-60812-101: RNCC: 3 | RNVC: 2
510092: RNCC: 5 | RNVC: 2

17 Oct 2006

5340-66-152-6025
Mounting Bracket

661526025
1621105: RNCC: 3 | RNVC: 2
471-51808-103: RNCC: 3 | RNVC: 2

14 Dec 2004

5340-66-130-6685
Dust And Moisture Seal Protective Cap

661306685
634B: RNCC: 3 | RNVC: 1
03543001: RNCC: 5 | RNVC: 2

31 Mar 1988

5340-66-154-6183
Rim Lock

661546183
BL5235QSC: RNCC: 3 | RNVC: 2
BL5235QSC: RNCC: 5 | RNVC: 2

25 Jul 2006

5340-66-147-5821
Plain Solid Disk

661475821
2005530: RNCC: 3 | RNVC: 2
2005530: RNCC: 5 | RNVC: 2

7 Aug 2001

5340-66-160-3318
Mounting Bracket

661603318
BMP-A05-2028-01: RNCC: 3 | RNVC: 2

13 Jun 2012

5340-66-152-3264
Dust And Moisture Seal Protective Plug

661523264
DAXDCAP59: RNCC: 3 | RNVC: 2
MLC-0073: RNCC: 5 | RNVC: 2

31 Aug 2004

5340-66-156-2626
Handwheel

661562626
471-90429-601: RNCC: 3 | RNVC: 2
502077: RNCC: 5 | RNVC: 2

11 Oct 2007

5340-66-156-3533
Locking Stay

661563533
471-51482-106: RNCC: 3 | RNVC: 2
521314: RNCC: 5 | RNVC: 2

5 Nov 2007

5340-66-069-8805
Manual Control Lever

660698805
AH21135: RNCC: 3 | RNVC: 2
678-083170: RNCC: 5 | RNVC: 2

15 Jul 1975

5340-66-152-3271
Dust And Moisture Seal Protective Plug

661523271
DHDSQ15905: RNCC: 3 | RNVC: 2
MLC-0458: RNCC: 5 | RNVC: 2

31 Aug 2004

5340-66-153-8436
Door Hook

661538436
RP238833: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-66-138-3424
Mounting Plate

661383424
04D003320: RNCC: 3 | RNVC: 2

13 Oct 1994

5340-66-130-7145
Webbing Strap

661307145
RANMME1881-1500MM: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

4 Jun 1988

5340-66-160-8447
Spring Tension Clip

661608447
FCC20-SS-P1: RNCC: 3 | RNVC: 2

5 Feb 2013

5340-66-147-7773
Backing Plate

661477773
A6941: RNCC: 3 | RNVC: 2

11 Sep 2001

5340-66-088-2945
Butt Hinge

660882945
1213-251903: RNCC: 3 | RNVC: 2

20 May 1975

5340-66-156-7729
Aircraft Latch Hook

661567729
556.10.09.071: RNCC: 3 | RNVC: 2

1 Apr 2008

5340-66-153-6324
Angle Bracket

661536324
DE102040002-2: RNCC: 3 | RNVC: 2

4 Oct 2005

5340-66-153-3104
Multiple Angle Bracket

661533104
DE252200010: RNCC: 3 | RNVC: 2

11 Jul 2005

5340-66-152-2611
Access Cover

661522611
BMA-A05-1478-01: RNCC: 3 | RNVC: 2

25 Sep 2004

5340-66-080-5643
Offset Lock

660805643
0FFSETR40A: RNCC: 3 | RNVC: 2
5340MSMSA0139: RNCC: 5 | RNVC: 9

26 Sep 1974

5340-66-150-0649
Padlock

661500649
NO PRIMARY REF 66-150-0649: RNCC: 3 | RNVC: 2
03380882: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-146-2070
General Purpose Access Door

661462070
487 1209-11: RNCC: 3 | RNVC: 2

16 Feb 2000

5340-66-155-8846
Mounting Bracket

661558846
471-50807-170: RNCC: 3 | RNVC: 2
506072: RNCC: 5 | RNVC: 2

25 Jun 2007

5340-66-152-5707
Mounting Bracket

661525707
RP688138/2: RNCC: 3 | RNVC: 2

16 Nov 2004

5340-66-156-6229
Mounting Bracket

661566229
NALM00699-2: RNCC: 3 | RNVC: 2
NALM00699-2: RNCC: 5 | RNVC: 2

13 Feb 2008

5340-66-158-3732
Angle Bracket

661583732
BYG2124: RNCC: 3 | RNVC: 2

1 Dec 2009

5340-66-158-8587
Double Angle Bracket

661588587
DE253600014: RNCC: 3 | RNVC: 2

8 Sep 2010

5340-66-131-5280
T-Bolt Clamp

661315280
3262108R1: RNCC: 3 | RNVC: 2

1 Dec 1988

5340-66-158-7152
Manual Control Handle

661587152
8005-0062: RNCC: 3 | RNVC: 2

24 Jun 2010

5340-66-087-6688
Expansion Shield

660876688
1213-214298: RNCC: 3 | RNVC: 2

20 Apr 1975

5340-66-038-7097
Oil Jet Adapter

660387097
A30206: RNCC: 3 | RNVC: 2
CA30206: RNCC: 3 | RNVC: 2

4 Jan 1971

5340-66-155-4969
Access Cover

661554969
196630-02711: RNCC: 3 | RNVC: 2

3 Apr 2007

5340-66-158-1039
Access Cover

661581039
471-PPJ00-100: RNCC: 3 | RNVC: 2
1707450: RNCC: 5 | RNVC: 2

19 Aug 2009

5340-66-157-4234
Dust And Moisture Seal Protective Cap

661574234
CP21: RNCC: 3 | RNVC: 2
15017470: RNCC: 5 | RNVC: 2

18 Nov 2008

5340-66-029-8753
Shipping Cap

660298753
PK246: RNCC: 3 | RNVC: 2

16 Oct 1968

5340-66-140-7684
Mounting Bracket

661407684
470D04100002: RNCC: 3 | RNVC: 2

26 Oct 1995

5340-66-145-2758
Top Cone Clamp Ring

661452758
00-203185: RNCC: 3 | RNVC: 2

9 Sep 1999

5340-66-146-6121
Bracket

661466121
A55-997-B2149-0A00: RNCC: 3 | RNVC: 2

7 Jun 2000

5340-66-153-2888
Mounting Bracket

661532888
A210 0332: RNCC: 3 | RNVC: 2

6 Jul 2005

5340-66-084-4267
Handwheel

660844267
20-98305179: RNCC: 3 | RNVC: 2

21 Mar 1975

5340-66-143-3298
Angle Bracket

661433298
141857: RNCC: 3 | RNVC: 2

9 Apr 1998

5340-66-150-1397
Ear Plugs 3M 1100 (

661501397
NO PRIMARY REF 66-150-1397: RNCC: 3 | RNVC: 2
00968337: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-017-0215
Angle Bracket

660170215
155: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-156-6000
Mounting Bracket

661566000
P10019-1: RNCC: 3 | RNVC: 2

4 Feb 2008

5340-66-156-2517
Mounting Bracket

661562517
A2100154: RNCC: 3 | RNVC: 2

4 Oct 2007

5340-66-156-3816
Strap Hinge Leaf

661563816
15010502: RNCC: 3 | RNVC: 2

14 Nov 2007

5340-66-145-5809
Clamp Cap

661455809
DE250980712: RNCC: 3 | RNVC: 2

7 Oct 1999

5340-66-147-2718
Wash Arm Plug

661472718
DTZ809: RNCC: 3 | RNVC: 2

20 Dec 2000

5340-66-110-3758
Angle Bracket

661103758
GS4139: RNCC: 3 | RNVC: 2

23 Mar 1981

5340-66-136-3758
Mounting Post

661363758
NR2280: RNCC: 3 | RNVC: 2

21 Oct 1992

5340-66-123-2850
Case Corner

661232850
B50684: RNCC: 3 | RNVC: 2

14 Nov 1985

5340-66-033-1802
Webbing Strap

660331802
DC3042-1: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

11 Aug 1969

5340-66-158-3039
Electronic Equipment Hardware Kit

661583039
FA268-0: RNCC: 3 | RNVC: 2

4 Nov 2009

5340-66-151-8361
Cushioning Pad

661518361
AC187-P: RNCC: 3 | RNVC: 2

24 Dec 2003

5340-66-072-5016
Butt Hinge

660725016
WELD0M406: RNCC: 3 | RNVC: 1

25 Jun 1974

5340-66-159-5876
Threaded Rod End

661595876
10008225: RNCC: 3 | RNVC: 2
BNF 10K: RNCC: 5 | RNVC: 2

14 Oct 2011

5340-66-035-2638
Panel Access Stay

660352638
2C5488: RNCC: 3 | RNVC: 2

7 Dec 1970

5340-66-161-0479
Access Cover

661610479
RP876: RNCC: 3 | RNVC: 2

2 May 2013

5340-66-145-8310
Mandrel

661458310
N/W/100-116467/4+7: RNCC: 3 | RNVC: 2

25 Nov 1999

5340-66-154-6294
Mounting Plate

661546294
6-128-3169: RNCC: 3 | RNVC: 2
6-128-3169: RNCC: 5 | RNVC: 2

31 Jul 2006

5340-66-158-6086
Mounting Bracket

661586086
SXK1110278/1: RNCC: 3 | RNVC: 2
SXK1110278/1: RNCC: 5 | RNVC: 2

15 Apr 2010

5340-66-122-7216
Bail Handle

5340-66-092-6211
Butt Hinge

5340-66-159-8821
Angle Bracket

661598821
557.22.09.184: RNCC: 3 | RNVC: 2

7 Mar 2012

5340-66-153-2644
Mounting Bracket

661532644
A210 0299: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-131-4932
Strap Assembly

661314932
STRAP: RNCC: 3 | RNVC: 1
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

28 Oct 1988

5340-66-063-3637
Hinged Hasp

660633637
HILLPLANT703: RNCC: 3 | RNVC: 2

19 Aug 1973

5340-66-039-6107
Door Handle

660396107
50169PC1: RNCC: 3 | RNVC: 2

1 Mar 1971

5340-66-161-3129
Block Clamp

661613129
529.20.09.093: RNCC: 3 | RNVC: 2

5 Sep 2013

5340-66-149-5711

5340-66-153-9088

5340-66-141-7719
Access Cover

661417719
166 X 34: RNCC: 3 | RNVC: 2
166X34: RNCC: 3 | RNVC: 2

19 Jan 1996

5340-66-147-3716
General Purpose Resilient Mount

661473716
710-7730: RNCC: 3 | RNVC: 2

4 Apr 2001

5340-66-066-4249
Angle Bracket

660664249
179256K: RNCC: 3 | RNVC: 2

7 Feb 1974

5340-66-094-5329
Loop Clamp

660945329
1B3-50-67: RNCC: 3 | RNVC: 2

17 Apr 1977

5340-66-142-5865
Mounting Bracket

661425865
DSA-10-389-4: RNCC: 3 | RNVC: 2
DSA-10-389-4: RNCC: 3 | RNVC: 2

26 Nov 1996

5340-66-145-4514
Uut Retainers

661454514
608/2/50862: RNCC: 3 | RNVC: 2

20 Sep 1999

5340-66-158-6831
Access Cover

661586831
RAY184018-1: RNCC: 3 | RNVC: 2
RAY184018-1: RNCC: 5 | RNVC: 2

3 Jun 2010

5340-66-150-0214
Rigid Caster

661500214
NO PRIMARY REF 66-150-0214: RNCC: 3 | RNVC: 2
00746368: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-158-2206
Mounting Plate

661582206
K11477-108: RNCC: 3 | RNVC: 2

2 Oct 2009

5340-66-151-6991
Corner Brace

661516991
DS3CNRBW: RNCC: 3 | RNVC: 2

3 Sep 2003

5340-66-146-1004
Tap Valve(Comp)

661461004
NC18: RNCC: 3 | RNVC: 2

19 Jan 2000

5340-66-155-3161
Loop Clamp

661553161
444028F: RNCC: 3 | RNVC: 2

28 Feb 2007

5340-66-137-6613
Spring Tension Clip

661376613
760980: RNCC: 3 | RNVC: 2

5 May 1994

5340-66-154-3686
Mounting Bracket

661543686
DE252490010: RNCC: 3 | RNVC: 2

5 May 2006

5340-66-147-8611
Angle Bracket

661478611
F/2888-550-035J: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-035J: RNCC: 5 | RNVC: 2

26 Sep 2001

5340-66-146-2645
Fd Cover Protection

661462645
A00007-00588-B-0001: RNCC: 3 | RNVC: 2

7 Mar 2000

5340-66-158-0624
Mounting Bracket

661580624
TF01800-2: RNCC: 3 | RNVC: 2

22 Jul 2009

5340-66-072-1787
Barrel Bolt

660721787
575-2 1-2: RNCC: 3 | RNVC: 1

9 Sep 1975

5340-66-094-5404
Turnbuckle

660945404
111B2-8-770B: RNCC: 3 | RNVC: 2

17 Apr 1977

5340-66-147-7732
Bc Coupling

661477732
BF-1: RNCC: 3 | RNVC: 1
429100: RNCC: 3 | RNVC: 2

20 Sep 2001

5340-66-154-6272
Mounting Bracket

661546272
471-51631-23: RNCC: 3 | RNVC: 2
524547: RNCC: 5 | RNVC: 2

31 Jul 2006

5340-66-131-4859
Vinyl Lace

661314859
3206607R1: RNCC: 3 | RNVC: 2

3 Nov 1988

5340-66-154-8754
Extension Drawer Slide

661548754
15011702-2750: RNCC: 3 | RNVC: 2

26 Sep 2006

5340-66-152-1472
Webbing Strap

661521472
434097B: RNCC: 3 | RNVC: 2

14 Jul 2004

5340-66-124-6855

5340-66-160-2124
Angle Bracket

661602124
ARLM0783-1: RNCC: 3 | RNVC: 2

30 Apr 2012

5340-66-027-0815
Runner

660270815
ADE(M)59-98: RNCC: 3 | RNVC: 2
ADE(N)59-98: RNCC: 5 | RNVC: 1

1 Jan 1968

5340-66-159-0892
Webbing Strap

661590892
10000129-1: RNCC: 3 | RNVC: 2

3 Feb 2011

5340-66-133-8271
Screw Thread Insert And Tool Assortment

661338271
3179-8: RNCC: 3 | RNVC: 2

9 Jul 1997

5340-66-043-7167
Angle Bracket

5340-66-149-5714

5340-66-149-5715

5340-66-143-3805
Locating Pin

661433805
PGM-E-4-8: RNCC: 3 | RNVC: 2

21 Apr 1998

5340-66-120-6742
Fwd. Hinge Half

661206742
12S1796-11-113: RNCC: 3 | RNVC: 2

13 Oct 1986

5340-66-153-7558
Mounting Bracket

661537558
73264-2-10: RNCC: 3 | RNVC: 2

24 Oct 2005

5340-66-146-3453
Lanyard

661463453
2386-56017-00: RNCC: 3 | RNVC: 2

10 Apr 2000

5340-66-156-8438
Mounting Bracket

661568438
471-20230-901: RNCC: 3 | RNVC: 2
471-20230-901: RNCC: 3 | RNVC: 2
512855: RNCC: 5 | RNVC: 2

5 May 2008

5340-66-145-6326
Retaining Strap

661456326
241956-001: RNCC: 3 | RNVC: 2

16 Nov 1999

5340-66-025-2164
Angle Bracket

660252164
ADE(V)94-475-2: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-128-5332
Loop Clamp

661285332
AYG466: RNCC: 3 | RNVC: 2

7 Dec 1988

5340-66-094-8388
Door Catch Lever

5340-66-157-7311
Manual Control Handle

661577311
503 62 67-71: RNCC: 3 | RNVC: 2
503 62 67-71: RNCC: 5 | RNVC: 2

2 Mar 2009

5340-66-154-6262
Corner Brace

661546262
471-51631-14: RNCC: 3 | RNVC: 2
524531: RNCC: 5 | RNVC: 2

31 Jul 2006

5340-66-138-9762
Access Cover

661389762
2104-155-0182: RNCC: 3 | RNVC: 2
0050-00-114-2461: RNCC: C | RNVC: 1

23 Dec 1993

5340-66-131-4884
Saddle Clamp

661314884
451790C2: RNCC: 3 | RNVC: 2

3 Nov 1988

5340-66-158-1737
Strap Hinge

661581737
OEM PART 2: RNCC: 3 | RNVC: 2

15 Sep 2009

5340-66-133-6798
Butt Hinge

661336798
DE580200208: RNCC: 3 | RNVC: 2

6 Mar 1990

5340-66-133-8848
Access Cover

661338848
ARLM0063: RNCC: 3 | RNVC: 1

26 Aug 1997

5340-66-160-9253
Retaining Clip

661609253
C18190: RNCC: 3 | RNVC: 2

7 Mar 2013

5340-66-157-6742
Protection Top Cap

661576742
D-2705: RNCC: 3 | RNVC: 2

6 Feb 2009

5340-66-150-0645
Padlock

661500645
232/30/619/KD: RNCC: 3 | RNVC: 2
03380933: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-125-2614
Butt Hinge

661252614
DE580160072-3: RNCC: 3 | RNVC: 2

18 Dec 1985

5340-66-145-7611
Damper

661457611
437 5870-24: RNCC: 3 | RNVC: 2

22 Oct 1999

5340-66-156-4528
Angle Bracket

661564528
15013485-05: RNCC: 3 | RNVC: 2

29 Nov 2007

5340-66-135-7149
Loop Clamp

661357149
90461-06087: RNCC: 3 | RNVC: 2

7 Jan 1992

5340-66-144-3664
Rod Retainer Clip

661443664
PL876242: RNCC: 3 | RNVC: 2

20 Oct 1998

5340-66-142-4627
Mounting Bracket

661424627
471-90423-103T03: RNCC: 3 | RNVC: 2
511259: RNCC: 3 | RNVC: 2

20 Aug 1996

5340-66-145-7865
Mounting Bracket

661457865
DDM-003: RNCC: 3 | RNVC: 2

9 Nov 1999

5340-66-138-9381
Escutcheon

661389381
69266-22010-01: RNCC: 3 | RNVC: 2
2530-97-151-3276: RNCC: C | RNVC: 1

2 Nov 1993

5340-66-155-0621
Bumper

661550621
471-40205-135: RNCC: 3 | RNVC: 2
515204: RNCC: 5 | RNVC: 2

23 Nov 2006

5340-66-144-5525
Dust And Moisture Seal Protective Cover

661445525
1675011: RNCC: 3 | RNVC: 2

8 Dec 1998

5340-66-140-4160
Handwheel

661404160
FE85089A125X11: RNCC: 3 | RNVC: 2

29 Mar 1995

5340-66-153-7108
Sun Shield

661537108
9125D40001023/A: RNCC: 3 | RNVC: 2

17 Oct 2005

5340-66-128-7267
Mounting Bracket

661287267
HYG3413: RNCC: 3 | RNVC: 2

14 Sep 1993

5340-66-147-6573
Webbing Strap

661476573
DT85049-G341/6: RNCC: 3 | RNVC: 2
FLSP-750: RNCC: 3 | RNVC: 2
DT85049-G341/6: RNCC: 5 | RNVC: 2

30 Oct 2001

5340-66-160-2554
Angle Bracket

661602554
ARLM0788-1: RNCC: 3 | RNVC: 2

10 May 2012

5340-66-108-8816
Angle Bracket

661088816
0M137325: RNCC: 3 | RNVC: 2
DE230010377 ISSUE 1: RNCC: 3 | RNVC: 2

5 Jun 1981

5340-66-126-8268
Loop Clamp

661268268
DE620050012-1: RNCC: 3 | RNVC: 2

2 Jul 1986

5340-66-156-5149
Headless Straight Rod

661565149
BMA-A05-0976-01: RNCC: 3 | RNVC: 2

17 Dec 2007

5340-66-126-6522
Access Cover

661266522
0313702: RNCC: 3 | RNVC: 2

27 May 1991

5340-66-056-4277
Rim Lock Set

660564277
R134: RNCC: 3 | RNVC: 2

2 Feb 1973

5340-66-145-7010
Clevis Assembly

661457010
DE250600000: RNCC: 3 | RNVC: 2

5 Jan 2000

5340-66-155-1769
Mounting Bracket

661551769
DG-3: RNCC: 3 | RNVC: 2

21 Dec 2006

5340-66-143-3669
Rear Cover

661433669
142625: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-66-157-9074
Mounting Bracket

661579074
HYG4089: RNCC: 3 | RNVC: 2

12 May 2009

5340-66-129-5157
Dust And Moisture Seal Protective Cover

661295157
TF00115-1: RNCC: 3 | RNVC: 2

12 Oct 1999

5340-66-137-3502
Slide Bracket

661373502
26-90062: RNCC: 3 | RNVC: 2

16 Dec 1992

5340-66-146-0862
Brace Bracket

661460862
438 0525-02: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-66-033-5840
Padlock

660335840
234X: RNCC: 3 | RNVC: 2

14 Oct 1969

5340-66-153-9113
Dust And Moisture Seal Protective Cap

661539113
645-0345A: RNCC: 3 | RNVC: 2

2 Dec 2005

5340-66-148-0580
Cover Plate

661480580
74-0071-001: RNCC: 3 | RNVC: 2

17 Jul 2002

5340-66-158-3000
Mounting Bracket

661583000
BDI 30400-3-8-1: RNCC: 3 | RNVC: 2

30 Oct 2009

5340-66-019-5647
Expansion Plug

660195647
TYPE A: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-159-1238
Mounting Plate

661591238
40X3X2200: RNCC: 3 | RNVC: 2

1 Mar 2011

5340-66-117-2861
Dust And Moisture Seal Protective Cap

661172861
N02DUSCAP: RNCC: 3 | RNVC: 2

18 Jan 1985

5340-66-155-5632
Mounting Bracket

661555632
X50KB430A: RNCC: 3 | RNVC: 2

16 Apr 2007

5340-66-063-9972
Support Bracket

660639972
ADE(V)50-9: RNCC: 3 | RNVC: 2

18 Oct 1973

5340-66-112-3273
Access Cover

661123273
21671: RNCC: 3 | RNVC: 2

28 Jun 1991

5340-66-147-2636
Bracket

661472636
DAS99S(MOD.SX): RNCC: 3 | RNVC: 2

15 Dec 2000

5340-66-110-5832
Synchro Clamp

661105832
MC09: RNCC: 3 | RNVC: 2
CLM9: RNCC: 5 | RNVC: 9

15 May 1981

5340-66-144-4806
Webbing Strap

661444806
11-240317A-43: RNCC: 3 | RNVC: 2

11 Nov 1998

5340-66-151-8071
Butt Hinge

661518071
DE251600020: RNCC: 3 | RNVC: 2
DE251600020: RNCC: 3 | RNVC: 2

30 Apr 2004

5340-66-143-3102
Holder

661433102
1 180 159: RNCC: 3 | RNVC: 2
1 180 159: RNCC: 5 | RNVC: 2

1 Apr 1998

5340-66-138-9364
Lock Plate

661389364
070952020102: RNCC: 3 | RNVC: 2
0064-95-202-0102: RNCC: C | RNVC: 1

29 Oct 1993

5340-66-141-0490
Door Holder

661410490
471-30465-109: RNCC: 3 | RNVC: 2
502300: RNCC: 3 | RNVC: 2

30 Aug 1995

5340-66-072-5015
Butt Hinge

660725015
NO PRIMARY REF 66-072-5015: RNCC: 3 | RNVC: 2

25 Jun 1974

5340-66-151-9689
Multiple Angle Bracket

661519689
MH-X300-0001 SHT 9: RNCC: 3 | RNVC: 1
C06587: RNCC: 3 | RNVC: 2

21 May 2004

5340-66-139-3682
Mounting Bracket

661393682
ATC9781: RNCC: 3 | RNVC: 2

9 Sep 1994

5340-66-016-3536
Loop Clamp

5340-66-082-6309
Loop Clamp

5340-66-084-8445
Butt Hinge

660848445
16360: RNCC: 3 | RNVC: 2

19 Oct 1975

5340-66-138-5430
Electronic Equipment Hardware Kit

661385430
621062-7: RNCC: 3 | RNVC: 2
13588021GR10P: RNCC: 5 | RNVC: 2

12 Jan 1994

5340-66-112-3205
Access Cover

661123205
450014110: RNCC: 3 | RNVC: 2

17 Jun 1991

5340-66-147-4487
Mounting Bracket

661474487
CX25-1-M35-0: RNCC: 3 | RNVC: 2

7 May 2001

5340-66-133-1988
Angle Bracket

661331988
DA89145000: RNCC: 3 | RNVC: 2

8 Dec 1989

5340-66-142-2794
General Purpose Resilient Mount

661422794
P471-90200-101T01: RNCC: 3 | RNVC: 2

4 May 1996

5340-66-152-5773
Loop Holder

661525773
RP688457: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-66-161-0186
Angle Bracket

661610186
1785DG00004: RNCC: 3 | RNVC: 2

23 Apr 2013

5340-66-060-9070
Handwheel

660609070
S3437: RNCC: 3 | RNVC: 2

19 Mar 1974

5340-66-161-2850
Mounting Bracket

661612850
15018208: RNCC: 3 | RNVC: 2

21 Aug 2013

5340-66-065-1716
Compression Cup

5340-66-154-8403
Mounting Plate

661548403
ARLM0859-1: RNCC: 3 | RNVC: 2

15 Sep 2006

5340-66-132-2805
Mounting Bracket

661322805
016AMR292-4: RNCC: 3 | RNVC: 2

25 Sep 1989

5340-66-138-7093
Helical Compression Spring Seat

661387093
120270-53130: RNCC: 3 | RNVC: 2

29 Mar 1994

5340-66-157-1824
Escutcheon Plate

661571824
524D01103100: RNCC: 3 | RNVC: 2

28 Aug 2008

5340-66-155-4089
Handwheel

661554089
3029-18-70: RNCC: 3 | RNVC: 2

23 Mar 2007

5340-66-157-4618
Webbing Strap

661574618
468-B3-750: RNCC: 3 | RNVC: 2

26 Nov 2008

5340-66-120-6747
Fwd. Hinge Half

661206747
12S1796-11-129: RNCC: 3 | RNVC: 2

13 Oct 1986

5340-66-152-7077
Strap

661527077
MH-A671-0002-A14: RNCC: 3 | RNVC: 2
MH-A671-0002 ITEM 54: RNCC: 5 | RNVC: 2

25 Feb 2005

5340-66-152-4621
Clamping Catch

661524621
701L: RNCC: 3 | RNVC: 2
701L: RNCC: 5 | RNVC: 2

27 Jan 2005

5340-66-122-6862
Loop Clamp

661226862
8ME2751P2: RNCC: 3 | RNVC: 2
8ME2751P2: RNCC: 3 | RNVC: 2
8ME2751: RNCC: 5 | RNVC: 2

16 Oct 1984

5340-66-070-3859
Antipilferage Seal

660703859
10PMG: RNCC: 3 | RNVC: 2

11 Aug 1974

5340-66-156-8886
Plate

661568886
209-7651: RNCC: 3 | RNVC: 2
209-7651: RNCC: 5 | RNVC: 2
209-7651: RNCC: 5 | RNVC: 2
209-7651: RNCC: 5 | RNVC: 2

22 May 2008

5340-66-143-3955
Mounting Plate

661433955
492074: RNCC: 3 | RNVC: 2

23 Apr 1998

5340-66-146-3507
Strap

661463507
240488A-40: RNCC: 3 | RNVC: 2

12 Apr 2000

5340-66-126-6531
Hex Standoff

661266531
0313725: RNCC: 3 | RNVC: 2

27 May 1991

5340-66-149-2071
Snap Hook

661492071
064-2: RNCC: 3 | RNVC: 2

14 Mar 2003

5340-66-140-8983
Dirt And Liquid Deflector

661408983
229 596: RNCC: 3 | RNVC: 2

7 Jun 1995

5340-66-010-9529
Rubber Bumper

660109529
TSE(V)54-355: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-143-2781
Manual Control Handle

661432781
8005-0001: RNCC: 3 | RNVC: 2
8005-0001: RNCC: 5 | RNVC: 2

2 Apr 1998

5340-66-148-8909
Pipe Hanger

661488909
5510/1A-PC7: RNCC: 3 | RNVC: 2

15 Nov 2002

5340-66-126-2065
Manual Control Handle

661262065
OM0-142456-3: RNCC: 3 | RNVC: 2

14 Dec 1990

5340-66-088-5402
Relay Clip

660885402
1213-5591943: RNCC: 3 | RNVC: 2

15 Jul 1975

5340-66-133-9235
Retaining Clip

661339235
DA96302000-1: RNCC: 3 | RNVC: 2
DA96302000-1: RNCC: 5 | RNVC: 2

18 Nov 1997

5340-66-025-2528
Helical Compression Spring Seat

660252528
GEB150: RNCC: 3 | RNVC: 2

26 Sep 1986

5340-66-154-8230
Lock-Release Lever

661548230
15007934: RNCC: 3 | RNVC: 2

13 Sep 2006

5340-66-110-5830
Synchro Clamp

661105830
MC20: RNCC: 3 | RNVC: 2
CLM20: RNCC: 5 | RNVC: 9

15 May 1981

5340-66-143-7268
Access Cover

661437268
658/2/06268/000: RNCC: 3 | RNVC: 2

2 Jul 1997

5340-66-157-6716
Access Cover

661576716
D-2655: RNCC: 3 | RNVC: 2

6 Feb 2009

5340-66-149-5771
Permanent Magnet

661495771
NO PRIMARY REF 66-149-5771: RNCC: 3 | RNVC: 2
QTMM31: RNCC: 5 | RNVC: 2

7 Apr 2003

5340-66-153-4355
Mounting Bracket

661534355
69-15858-3: RNCC: 3 | RNVC: 2
69-15858-3: RNCC: 5 | RNVC: 2

18 Aug 2005

5340-66-152-0867
Mounting Bracket

661520867
VDA-001-017: RNCC: 3 | RNVC: 2

6 May 2004

5340-66-154-6822
Access Cover

661546822
VTR251-2TSUB14F4T19-7IIINM40W3P-: RNCC: 3 | RNVC: 1

11 Aug 2006

5340-66-137-4539
Mounting Plate

661374539
K43505: RNCC: 3 | RNVC: 2

15 Jan 1993

5340-66-108-4601
Headless Straight Rod

661084601
DE230010168: RNCC: 3 | RNVC: 2

18 Jul 1982

5340-66-154-8496
Mounting Bracket

661548496
15006176: RNCC: 3 | RNVC: 2

19 Sep 2006

5340-66-156-6228
Mounting Bracket

661566228
NALM00699-1: RNCC: 3 | RNVC: 2
NALM00699-1: RNCC: 5 | RNVC: 2

13 Feb 2008

5340-66-010-1430
Butt Hinge

660101430
404: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-153-2668
Mounting Bracket

661532668
A210 0297: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-114-1380
Dust And Moisture Seal Protective Plug

661141380
RANTE2722: RNCC: 3 | RNVC: 2

9 May 1982

5340-66-135-4714
Locking Stay

661354714
110.65.07.089: RNCC: 3 | RNVC: 2

9 Jan 1992

5340-66-135-2774
General Purpose Resilient Mount

661352774
M211-S: RNCC: 3 | RNVC: 2
10400223: RNCC: 5 | RNVC: 2

30 Jan 1992

5340-66-060-4334
Bumper

660604334
76652R11: RNCC: 3 | RNVC: 2

22 Jun 1973

5340-66-139-1946
Mounting Bracket

661391946
MEA 1756-1: RNCC: 3 | RNVC: 2

10 May 1994

5340-66-158-5478
Manual Control Handle

661585478
HOLDER 6: RNCC: 3 | RNVC: 2
HOLDER 6: RNCC: 5 | RNVC: 2

19 Mar 2010

5340-66-058-5334
Drive Gear Clip

660585334
1373122: RNCC: 3 | RNVC: 2

3 Apr 1973

5340-66-061-6652
Synchro Clamp

660616652
76874A: RNCC: 3 | RNVC: 2

15 Jul 1973

5340-66-147-8518
Angle Bracket

661478518
F/2888-550-040B: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-040B: RNCC: 5 | RNVC: 2

24 Sep 2001

5340-66-010-5688
Mounting Bracket

660105688
TSE(V)102-30: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-154-9208
Runner

661549208
471-50807-111: RNCC: 3 | RNVC: 2
506022: RNCC: 5 | RNVC: 2

9 Oct 2006

5340-66-084-9019
Lock Shield

660849019
281685: RNCC: 3 | RNVC: 2

7 May 1976

5340-66-079-0157
Rim Lock Set

660790157
2002374659: RNCC: 3 | RNVC: 2

12 Oct 1974

5340-66-126-8936
Nonmetallic Bumper

661268936
285-03-11120: RNCC: 3 | RNVC: 2

19 Aug 1986

5340-66-160-9262
Lock-Release Lever

661609262
AS23-06-05: RNCC: 3 | RNVC: 2

8 Mar 2013

5340-66-159-0334
Mounting Plate

661590334
1008W082-001: RNCC: 3 | RNVC: 2

14 Dec 2010

5340-66-154-0837
Mounting Plate

661540837
DE252010009: RNCC: 3 | RNVC: 2

17 Feb 2006

5340-66-159-4739
Crank Handle

661594739
50100014: RNCC: 3 | RNVC: 2

1 Aug 2011

5340-66-159-1550
Loop Clamp

661591550
EN4113S03WR: RNCC: 3 | RNVC: 2

15 Mar 2011

5340-66-155-1529
Webbing Strap

661551529
17446512: RNCC: 1 | RNVC: 2
BATTERY STRAP: RNCC: 3 | RNVC: 2
17446512: RNCC: 5 | RNVC: 2

18 Dec 2006

5340-66-149-1521
Slide Track

661491521
12756602-01: RNCC: 3 | RNVC: 2

19 Feb 2003

5340-66-159-8406
Handle Grip

661598406
3952080025: RNCC: 3 | RNVC: 2
SP98146: RNCC: 5 | RNVC: 2

1 Mar 2012

5340-66-151-7393
Retaining Clip

661517393
BHE 03014: RNCC: 3 | RNVC: 2

15 Jan 2004

5340-66-158-2480
Mounting Bracket

661582480
X50RH211A: RNCC: 3 | RNVC: 2

12 Oct 2009

5340-66-150-7308
Access Cover

661507308
0000427/1-3: RNCC: 3 | RNVC: 2

1 May 2003

5340-66-141-1265
Snap Hook

661411265
1551/5: RNCC: 3 | RNVC: 2
1551/5: RNCC: 5 | RNVC: 2

21 Sep 1995

5340-66-154-6517
Access Cover

661546517
6-086-3286: RNCC: 3 | RNVC: 2

3 Aug 2006

5340-66-147-3192
Alignment Shaft

661473192
752-2002-92: RNCC: 3 | RNVC: 2

8 Mar 2001

5340-66-068-0628
Spring Tension Clip

5340-66-154-6265
Extension Handle

661546265
6-086-3281: RNCC: 3 | RNVC: 2
6-086-3281: RNCC: 5 | RNVC: 2

31 Jul 2006

5340-66-154-6975
Catch Strike

661546975
DE252580029: RNCC: 3 | RNVC: 2

15 Aug 2006

5340-66-101-5835
Mounting Plate

661015835
111-102: RNCC: 3 | RNVC: 2

22 May 1979

5340-66-118-6402
Steel Hinge

661186402
950-004: RNCC: 3 | RNVC: 2

8 Sep 1984

5340-66-146-0897
General Purpose Access Door

661460897
438 4326-01: RNCC: 3 | RNVC: 2

13 Jan 2000

5340-66-159-2331
Mounting Plate

661592331
DY-HP-02-0082: RNCC: 3 | RNVC: 2

15 Apr 2011

5340-66-154-6415
Mounting Plate

661546415
471-20201-601: RNCC: 3 | RNVC: 2
511831: RNCC: 5 | RNVC: 2

1 Aug 2006

5340-66-141-6002
Electronic Equipment Hardware Kit

661416002
MX-F326: RNCC: 3 | RNVC: 2
DE530020035: RNCC: 3 | RNVC: 2
DE530020035: RNCC: 3 | RNVC: 2

16 Oct 1996

5340-66-125-8990
Access Cover

661258990
7LG-87212-00: RNCC: 3 | RNVC: 2

2 Jan 1992

5340-66-156-4407
Webbing Strap

661564407
10006013-035: RNCC: 3 | RNVC: 2
10006013-035: RNCC: 3 | RNVC: 2
10006013-035: RNCC: 5 | RNVC: 2

27 Nov 2007

5340-66-158-7954
Spring Holder

661587954
P10005-13: RNCC: 3 | RNVC: 2

3 Aug 2010

5340-66-155-7434
Angle Bracket

661557434
X50QL254: RNCC: 3 | RNVC: 2

17 May 2007

5340-66-010-1420
Butt Hinge

660101420
602: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-147-2541
Retaining Clip

661472541
CWA5D10: RNCC: 3 | RNVC: 2

11 Dec 2000

5340-66-097-6723
Retaining Strap

660976723
402497: RNCC: 3 | RNVC: 2
602715: RNCC: 3 | RNVC: 2

26 May 1978

5340-66-029-4833
Dust And Moisture Seal Boot

660294833
P614: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-158-2756
Rod End Clevis

661582756
MYH3322: RNCC: 3 | RNVC: 2

22 Oct 2009

5340-66-087-7290
Butt Hinge

660877290
1213-265254: RNCC: 3 | RNVC: 2

7 Apr 1975

5340-66-123-6693
Hook Release Tool

661236693
TF00168-1: RNCC: 3 | RNVC: 2

2 Jun 1998

5340-66-160-2539
Angle Bracket

661602539
S2599117: RNCC: 3 | RNVC: 2

9 May 2012

5340-66-143-8709
Access Cover

661438709
6.036.150: RNCC: 3 | RNVC: 2

1 Sep 1997

5340-66-158-5624
Mounting Plate

661585624
P10190-05: RNCC: 3 | RNVC: 2

25 Mar 2010

5340-66-150-1394
Ear Plug Moldex Roc

661501394
NO PRIMARY REF 66-150-1394: RNCC: 3 | RNVC: 2
03117756: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-151-8632
Bridge Clamp

661518632
9210D07001025: RNCC: 3 | RNVC: 2

5 Feb 2004

5340-66-128-5975
Webbing Strap

661285975
900227: RNCC: 3 | RNVC: 2
HYL9849: RNCC: 5 | RNVC: 2

4 Oct 1990

5340-66-077-9305
Buckle

660779305
12-50026: RNCC: 3 | RNVC: 2

20 Oct 1974

5340-66-143-3916
Bracket

661433916
322426: RNCC: 3 | RNVC: 2

22 Apr 1998

5340-66-151-0176
Dust And Moisture Seal Protective Cover

661510176
C31-A52-005-001: RNCC: 3 | RNVC: 2

20 Oct 2004

5340-66-159-7628
Retaining Strap

661597628
1600-03-0303A2: RNCC: 3 | RNVC: 2

14 Feb 2012

5340-66-130-7674
Cap

661307674
607989-13-BA: RNCC: 3 | RNVC: 2
0029-LL-HDH-X877: RNCC: 6 | RNVC: 9

26 May 1988

5340-66-029-0220
Electronic Equipment Hardware Kit

660290220
ADE(W)67-1706: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-153-9270
Retaining Clip

661539270
316SS R CLIP: RNCC: 3 | RNVC: 2
316SS R CLIP: RNCC: 5 | RNVC: 2

14 Dec 2005

5340-66-093-1314
Safety Latch Strike

660931314
K56RSTRIKE: RNCC: 3 | RNVC: 2

22 Dec 1976

5340-66-160-8706
Mounting Bracket

661608706
15017131: RNCC: 3 | RNVC: 2

15 Feb 2013

5340-66-087-7654
Retaining Strap

660877654
1213-26772: RNCC: 3 | RNVC: 2

20 Apr 1975

5340-66-150-5808
Key Holder

661505808
NO PRIMARY REF 66-150-5808: RNCC: 3 | RNVC: 2
04068501: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-146-3956
Clamping Handle

661463956
8188-227: RNCC: 3 | RNVC: 2

4 May 2000

5340-66-154-5637
Mounting Bracket

661545637
008-02171-001: RNCC: 3 | RNVC: 2

6 Jul 2006

5340-66-156-5040
Mounting Bracket

661565040
471-62810-102: RNCC: 3 | RNVC: 2
501379: RNCC: 5 | RNVC: 2

13 Dec 2007

5340-66-153-4079
Mounting Plate

661534079
15012812-02: RNCC: 3 | RNVC: 2

12 Aug 2005

5340-66-086-0154
Angle Bracket

660860154
700-160: RNCC: 3 | RNVC: 2

8 Jun 1975

5340-66-088-4905
Hinged Hasp

660884905
C372JAP4 1-2IN: RNCC: 3 | RNVC: 2

1 Feb 1976

5340-66-156-3954
Quick Release Plunger

661563954
CL-10-LHRP-S: RNCC: 3 | RNVC: 2
10001458-04: RNCC: 7 | RNVC: 2

19 Nov 2007

5340-66-157-7082
Rim Latch

661577082
TYNA10227A: RNCC: 3 | RNVC: 2

19 Feb 2009

5340-66-150-8219
Angle Bracket

661508219
BDI 8214: RNCC: 3 | RNVC: 2
BDI 8214: RNCC: 3 | RNVC: 2

18 Aug 2003

5340-66-131-0546
Manual Control Handle

661310546
31: RNCC: 3 | RNVC: 2

6 Dec 1988

5340-66-157-3101
Locking Stay

661573101
1000081: RNCC: 3 | RNVC: 2
0.83.0001.3: RNCC: 5 | RNVC: 2

7 Oct 2008

5340-66-152-3747
Mounting Bracket

661523747
15003014: RNCC: 3 | RNVC: 2

26 Oct 2004

5340-66-157-2685
Angle Bracket

661572685
10RE29443M: RNCC: 3 | RNVC: 2

22 Sep 2008

5340-66-145-5795
Mounting Bracket

661455795
DE250980217: RNCC: 3 | RNVC: 2

7 Oct 1999

5340-66-150-4028
Strapping

661504028
NO PRIMARY REF 66-150-4028: RNCC: 3 | RNVC: 2
05774810: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-143-3392
Bowl Guard

661433392
141964: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-66-035-2686
Panel Access Stay

660352686
2C5614: RNCC: 3 | RNVC: 2

14 Apr 1970

5340-66-146-3787
Inner Panel-Door

661463787
004263: RNCC: 3 | RNVC: 2

19 Apr 2000

5340-66-085-5144
Key Blank

660855144
K1054A: RNCC: 3 | RNVC: 2

19 Oct 1975

5340-66-148-3925
Cover

661483925
C11181: RNCC: 3 | RNVC: 2

8 Mar 2002

5340-66-144-4768
Hand Crank

661444768
FE2903-080006: RNCC: 3 | RNVC: 2

11 Nov 1998

5340-66-144-5224
Mounting Bracket

661445224
A209142-13I: RNCC: 3 | RNVC: 2

3 Dec 1998

5340-66-124-7056
Collar

661247056
MLF-107: RNCC: 3 | RNVC: 2

24 Oct 1985

5340-66-152-1819
Clamping Catch

661521819
4311-0063: RNCC: 3 | RNVC: 2
4311-0063: RNCC: 5 | RNVC: 2
HLKL100BK: RNCC: 5 | RNVC: 2

22 Apr 2004

5340-66-157-2742
Mounting Plate

661572742
10RE29461M: RNCC: 3 | RNVC: 2

23 Sep 2008

5340-66-152-4892
T Bracket

661524892
DE251680011: RNCC: 3 | RNVC: 2

8 Feb 2005

5340-66-159-8173
Angle Bracket

661598173
553.10.09.069: RNCC: 3 | RNVC: 2

22 Feb 2012

5340-66-142-4433
Webbing Strap

661424433
1861-2-1456X1200MM: RNCC: 3 | RNVC: 2

31 Jul 1996

5340-66-140-5829
Cushioning Pad

661405829
004-351-02: RNCC: 3 | RNVC: 2

2 Nov 1995

5340-66-150-0667
Padlock

661500667
NO PRIMARY REF 66-150-0667: RNCC: 3 | RNVC: 2
03381222: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-147-7558
Launch Rail Base

661477558
6671247-1: RNCC: 3 | RNVC: 2
6671247-1: RNCC: C | RNVC: 1

8 Aug 2001

5340-66-124-3675
Mounting Plate

661243675
1B2B-50-61: RNCC: 3 | RNVC: 2

7 Feb 1986

5340-66-033-4702
Helical Compression Spring Seat

660334702
18-181: RNCC: 3 | RNVC: 2

26 Aug 1969

5340-66-158-4106
Mounting Bracket

661584106
ADE(M)106-5/2B: RNCC: 3 | RNVC: 2

22 Dec 2009

5340-66-147-2744
Drain Seat

661472744
DZP14CC: RNCC: 3 | RNVC: 2

21 Dec 2000

5340-66-146-3511
Mounting Plate

661463511
240495A: RNCC: 3 | RNVC: 2

12 Apr 2000

5340-66-157-3175
Mounting Bracket

661573175
MM-0080-Z319: RNCC: 3 | RNVC: 2

8 Oct 2008

5340-66-144-6228
Webbing Strap

661446228
AS/NZS 4380:1996: RNCC: 3 | RNVC: 1
11-240550A-150: RNCC: 3 | RNVC: 2
11-240550A-150: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-66-154-8129
Manual Control Lever

661548129
471-50806-137: RNCC: 3 | RNVC: 2
509449: RNCC: 5 | RNVC: 2

11 Sep 2006

5340-66-158-7593
Mounting Bracket

661587593
BMA-A08-0307-01: RNCC: 3 | RNVC: 2

28 Jul 2010

5340-66-161-1795
Pipe Hanger

661611795
A40-003135-001: RNCC: 3 | RNVC: 2

15 Jul 2013

5340-66-160-1119
Cushioning Pad

661601119
90-3492-09: RNCC: 3 | RNVC: 2

3 Apr 2012

5340-66-158-0724
Angle Bracket

661580724
1728-BH-1161-01: RNCC: 3 | RNVC: 2

28 Jul 2009

5340-66-158-7599
Mounting Bracket

661587599
BMA-A08-0288: RNCC: 3 | RNVC: 2

28 Jul 2010

5340-66-138-9732
Rh Stay Bracket

661389732
3TB-83369-00: RNCC: 3 | RNVC: 2
0053-03-833-6900: RNCC: C | RNVC: 1

21 Dec 1993

5340-66-150-5415
Mechanic Equipment Hardware Kit

661505415
NO PRIMARY REF 66-150-5415: RNCC: 3 | RNVC: 2
01364354: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-151-7540
Webbing Strap

661517540
DHS 412: RNCC: 3 | RNVC: 2

26 Mar 2004

5340-66-143-3301
Plate Drive

661433301
141861: RNCC: 3 | RNVC: 2

9 Apr 1998

5340-66-157-7192
Angle Bracket

661577192
HYG5894: RNCC: 3 | RNVC: 2

25 Feb 2009

5340-66-157-7586
Mechanical Stop

661577586
506 14 32-01: RNCC: 3 | RNVC: 2
506 14 32-01: RNCC: 5 | RNVC: 2

17 Mar 2009

5340-66-152-0308
Mounting Bracket

661520308
BMA-A10-0109-01: RNCC: 3 | RNVC: 2

21 Sep 2004

5340-66-134-9735
Loop Clamp

661349735
CP1090-5: RNCC: 3 | RNVC: 2

16 Jan 1991

5340-66-155-9224
Rod End Clevis

661559224
471-50809-163: RNCC: 3 | RNVC: 2
502598: RNCC: 5 | RNVC: 2

28 Jun 2007

5340-66-157-4657
Access Cover

661574657
V10-10-03-00-00: RNCC: 3 | RNVC: 2

26 Nov 2008

5340-66-153-7622
Mounting Bracket

661537622
73264-2-09: RNCC: 3 | RNVC: 2

25 Oct 2005

5340-66-152-7829
Bow Handle

661527829
HRV100501000: RNCC: 3 | RNVC: 2

18 Mar 2005

5340-66-144-5263
Mounting Bracket

661445263
A209141-5L: RNCC: 3 | RNVC: 2

4 Dec 1998

5340-66-146-6642
Retaining Clip

661466642
1317-046: RNCC: 3 | RNVC: 2
1317-046: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-66-153-2880
Mounting Bracket

661532880
A210 0334: RNCC: 3 | RNVC: 2

6 Jul 2005

5340-66-160-6714
Mounting Plate

661606714
23-2582-05: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-66-157-7314
Access Cover

661577314
503 62 78-08: RNCC: 3 | RNVC: 2
503 62 78-08: RNCC: 5 | RNVC: 2

2 Mar 2009

5340-66-150-2472
Angle Bracket

661502472
NO PRIMARY REF 66-150-2472: RNCC: 3 | RNVC: 2
00627356: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-157-1528
Mounting Bracket

661571528
22M-70-00212: RNCC: 3 | RNVC: 2
22M-70-00212: RNCC: 5 | RNVC: 2

18 Aug 2008

5340-66-156-1504
Dust And Moisture Seal Protective Cap

661561504
BMA-A13-0080-01: RNCC: 3 | RNVC: 2

7 Sep 2007

5340-66-159-3904
Headless Straight Rod

661593904
1250-02-0500C1-01-P1: RNCC: 3 | RNVC: 2
QVRL1250020500C101: RNCC: 5 | RNVC: 2
1250-02-0500C1-01: RNCC: 5 | RNVC: 9
1250-02-0500C1-01: RNCC: 6 | RNVC: 9

21 Jun 2011

5340-66-159-6451
Mounting Bracket

661596451
043255A-01: RNCC: 3 | RNVC: 2

21 Nov 2011

5340-66-152-6995
Stand Base

661526995
6460042/21-MOD2: RNCC: 3 | RNVC: 2

6 Jan 2005

5340-66-145-7188
Ten Strap Assembly

661457188
TC-01-011: RNCC: 3 | RNVC: 2

3 Feb 2000

5340-66-156-7203
Mounting Bracket

661567203
BMF-A05-1497-01: RNCC: 3 | RNVC: 2

7 Mar 2008

5340-66-120-4209
Nut And Bolt Locking Plate

661204209
407684: RNCC: 3 | RNVC: 2

3 May 1984

5340-66-144-0558
Bracket

661440558
D0921S: RNCC: 3 | RNVC: 2
D0921S: RNCC: 5 | RNVC: 1

6 Mar 2003

5340-66-154-8196
Basket Guard

661548196
15007924: RNCC: 3 | RNVC: 2

12 Sep 2006

5340-66-157-8261
Dust And Moisture Seal Protective Plug

661578261
50063: RNCC: 3 | RNVC: 2

7 Apr 2009

5340-66-155-1013
Knob Cover

661551013
2400185: RNCC: 3 | RNVC: 2

1 Dec 2006

5340-66-027-6112
Mounting Bracket

5340-66-036-3258
Webbing Strap

5340-66-049-8330
Hinge Top Bracket

5340-66-036-4704
Support

5340-66-127-4567
Leather Strap

661274567
13-0190: RNCC: 3 | RNVC: 2

13 Aug 1986

5340-66-158-7151
Access Cover

661587151
0703-0082: RNCC: 3 | RNVC: 2

24 Jun 2010

5340-66-139-5463
Mounting Bracket

661395463
RA-CP-000: RNCC: 3 | RNVC: 2

7 Jun 1994

5340-66-147-8685
Guide Roller

661478685
2888-575-011A: RNCC: 3 | RNVC: 2
Q EDE 2888-575-011A: RNCC: 5 | RNVC: 2

15 Oct 2001

5340-66-136-3516
Mounting Bracket

661363516
675/1/43282/000: RNCC: 3 | RNVC: 2

18 Aug 1992

5340-66-146-3903
Spring Tension Clip

661463903
73193-3-42: RNCC: 3 | RNVC: 2

26 Apr 2000

5340-66-139-6171
Ha Bracket Weldment

661396171
56W4-S514 PC 2: RNCC: 3 | RNVC: 1
56W4-S514 PC 2: RNCC: 3 | RNVC: 2

5 Jul 1994

5340-66-154-8125
Mounting Plate

661548125
471-50806-133T02: RNCC: 3 | RNVC: 2
509444: RNCC: 5 | RNVC: 2

11 Sep 2006

5340-66-151-1027
Angle Bracket

661511027
LTA-A08-037-001: RNCC: 3 | RNVC: 2
LTA-A08-037: RNCC: 3 | RNVC: 2

22 May 2003

5340-66-152-4103
Belt-Strap Keeper

661524103
5340-058: RNCC: 3 | RNVC: 1
DEF(AUST)2010: RNCC: 3 | RNVC: 1
DEF(AUST)2010: RNCC: 4 | RNVC: 1

6 Nov 2004

5340-66-159-5925
Bumper

661595925
A1-21560-442/4: RNCC: 3 | RNVC: 2

19 Oct 2011

5340-66-153-2627
Mounting Bracket

661532627
A210 0318: RNCC: 3 | RNVC: 2

4 Jul 2005

5340-66-146-4662
Base

661464662
73016-2-46: RNCC: 3 | RNVC: 2
73016-2-46: RNCC: 5 | RNVC: 2

18 May 2000

5340-66-112-3537
Access Cover

661123537
525.14.09.034: RNCC: 3 | RNVC: 2

13 May 1991

5340-66-160-9424
Mounting Bracket

661609424
DE252930008: RNCC: 3 | RNVC: 2

18 Mar 2013

5340-66-152-0151
Pawl Fastener

661520151
A/SR18/W6/SS/HTC: RNCC: 3 | RNVC: 2

1 Sep 2004

5340-66-130-7837
Mounting Bracket

661307837
016AMR239-2: RNCC: 3 | RNVC: 2

15 Jun 1988

5340-66-157-8727
Mounting Plate

661578727
BMA-A19-0137-01: RNCC: 3 | RNVC: 2

28 Apr 2009

5340-66-161-0503
Butt Hinge

661610503
HINGE-A15: RNCC: 3 | RNVC: 2

3 May 2013

5340-66-160-9115
Webbing Strap

661609115
10006012-055: RNCC: 3 | RNVC: 2

4 Mar 2013

5340-66-150-4135
Screw Thread Insert And Tool Assortment

661504135
NO PRIMARY REF 66-150-4135: RNCC: 3 | RNVC: 2
06460301: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-158-7572
Mounting Bracket

661587572
BMA-A31-0042-01: RNCC: 3 | RNVC: 2

28 Jul 2010

5340-66-138-9710
Left Bracket

661389710
X50KBA31F: RNCC: 3 | RNVC: 2
0050-00-000-5031: RNCC: C | RNVC: 1

13 Dec 1993

5340-66-142-9776
Mounting Plate

661429776
658/2/06649/000: RNCC: 3 | RNVC: 2

5 May 1997

5340-66-158-5580
Mounting Bracket

661585580
P10143-02: RNCC: 3 | RNVC: 2

24 Mar 2010

5340-66-160-8525
Mounting Bracket

661608525
1400-02-0301W2: RNCC: 3 | RNVC: 2

7 Feb 2013

5340-66-151-1413
Mounting Bracket

661511413
LTA-A12-052-001: RNCC: 3 | RNVC: 2
LTA-A12-052: RNCC: 5 | RNVC: 2

23 Jun 2003

5340-66-145-9504
Modified Bumper

661459504
2888-570-010B: RNCC: 3 | RNVC: 2
Q EDE 2888-570-010B: RNCC: 5 | RNVC: 2

16 Oct 2001

5340-66-132-4802
Nonmetallic Bumper

661324802
SUA2-72: RNCC: 3 | RNVC: 2

2 Apr 1990

5340-66-043-7428
Clamp Retaini Plate

5340-66-157-5047
Mending Plate

661575047
V05-08-03-01-01: RNCC: 3 | RNVC: 2

3 Dec 2008

5340-66-150-0234
Swivel Caster

661500234
NO PRIMARY REF 66-150-0234: RNCC: 3 | RNVC: 2
00431596: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-140-6094
Webbing Strap

661406094
B1000: RNCC: 3 | RNVC: 2

17 May 1995

5340-66-045-3778
Key Blank

660453778
C3: RNCC: 3 | RNVC: 2

26 Jan 1972

5340-66-118-4549
Helical Compression Spring Seat

661184549
AAE00083: RNCC: 3 | RNVC: 2

5 Apr 1984

5340-66-157-7585
Spring Window Bolt

661577585
1135.03: RNCC: 3 | RNVC: 2

17 Mar 2009

5340-66-147-6361
Mounting Bracket

661476361
A55-997-A2530-0A00: RNCC: 3 | RNVC: 2

15 Oct 2001

5340-66-149-3047
Permanent Magnet

661493047
NO PRIMARY REF 66-149-3047: RNCC: 3 | RNVC: 2
09160705: RNCC: 5 | RNVC: 2

26 Mar 2003

5340-66-027-2387
Butt Hinge

660272387
ADE(V)94-471: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-116-5661
Retaining Strap

661165661
261/25: RNCC: 3 | RNVC: 2

23 Feb 1983

5340-66-129-8826
Angle Bracket

661298826
A17/014-04C: RNCC: 3 | RNVC: 2

1 May 2001

5340-66-144-3952
Webbing Strap

661443952
73274-2-67: RNCC: 3 | RNVC: 2

10 Dec 1998

5340-66-146-0893
Mounting Plate

661460893
438 4157-01: RNCC: 3 | RNVC: 2

13 Jan 2000

5340-66-154-3345
General Purpose Resilient Mount

661543345
BMA-H18-0001-01: RNCC: 3 | RNVC: 2
MR660: RNCC: 3 | RNVC: 2

27 Apr 2006

5340-66-129-5820
Manual Control Handle

661295820
10D062937: RNCC: 3 | RNVC: 2

24 Jan 2000

5340-66-128-5873
Mounting Bracket

661285873
HYL9342: RNCC: 3 | RNVC: 2
660: RNCC: 5 | RNVC: 2

22 Jan 1990

5340-66-156-6378
Escutcheon Plate

661566378
C21643: RNCC: 3 | RNVC: 2

19 Feb 2008

5340-66-158-7697
Mounting Bracket

661587697
BME-A05-0219-01: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-66-150-1581
Dust And Moisture Seal Protective Cap

661501581
NO PRIMARY REF 66-150-1581: RNCC: 3 | RNVC: 2
02922266: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-038-2536
Angle Bracket

5340-66-147-2325
Elbow Union

661472325
004/501/GMOWS.3030.2.02: RNCC: 3 | RNVC: 2

29 Nov 2000

5340-66-121-0367
Access Cover

661210367
29000/485-2: RNCC: 2 | RNVC: 2
29000/485-2: RNCC: 3 | RNVC: 2
29000/485-2: RNCC: 3 | RNVC: 2

4 Jul 1984

5340-66-161-2935
Nonmetallic Solid Wheel

661612935
LM-61: RNCC: 3 | RNVC: 2

23 Aug 2013

5340-66-146-8920
Gland Backplate

661468920
ST AA1 0870: RNCC: 3 | RNVC: 2

19 Sep 2000

5340-66-150-1405
Earplugs Laser-Lite

661501405
NO PRIMARY REF 66-150-1405: RNCC: 3 | RNVC: 2
01207313: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-097-1081
Retaining Clip

660971081
318669: RNCC: 3 | RNVC: 2

7 May 1978

5340-66-150-7309
Access Cover

661507309
0000428/1-3: RNCC: 3 | RNVC: 2

1 May 2003

5340-66-142-2880
Access Cover

661422880
6.128.3148: RNCC: 3 | RNVC: 2

15 May 1996

5340-66-019-5648
Expansion Plug

660195648
TYPE A: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-147-7554
Launc Rail Assembly

661477554
6671243-9: RNCC: 3 | RNVC: 2
6671243-9: RNCC: C | RNVC: 1

8 Aug 2001

5340-66-158-6953
Access Cover

661586953
537 00 10-01: RNCC: 3 | RNVC: 2
537 00 10-01: RNCC: 5 | RNVC: 2

10 Jun 2010

5340-66-152-3221
Lever Hook Latch

661523221
ZCP-PAL301: RNCC: 3 | RNVC: 2
ZCP-PAL301: RNCC: 5 | RNVC: 2

31 Aug 2004

5340-66-147-1904
Gas Spring

661471904
237124-001: RNCC: 3 | RNVC: 2
237124PD: RNCC: 3 | RNVC: 2
237124PD: RNCC: 5 | RNVC: 2

15 Dec 2000

5340-66-154-5478
Mounting Bracket

661545478
JYG0568: RNCC: 3 | RNVC: 2

4 Jul 2006

5340-66-154-7338
Mounting Bracket

661547338
15003926: RNCC: 3 | RNVC: 2

24 Aug 2006

5340-66-154-7391
Webbing Strap

661547391
10006013-045: RNCC: 3 | RNVC: 2
10006013-045: RNCC: 5 | RNVC: 2

25 Aug 2006

5340-66-087-7498
Plug Button

660877498
1213-24562: RNCC: 3 | RNVC: 2

7 Apr 1975

5340-66-061-1244
Barrel Bolt

660611244
AUSTRALIAN FITTINGS 351: RNCC: 3 | RNVC: 1
04048408: RNCC: 5 | RNVC: 2
07186406: RNCC: 5 | RNVC: 2

12 Oct 1973

5340-66-131-7803
Loop Clamp

661317803
N313-5: RNCC: 3 | RNVC: 2
946.31.05.123: RNCC: 5 | RNVC: 2

17 Mar 1989

5340-66-155-4373
Sheet

661554373
203-46-71210: RNCC: 3 | RNVC: 2
203-46-71210: RNCC: 5 | RNVC: 2

27 Mar 2007

5340-66-151-2831
Invisible Hinge

661512831
SOSS101: RNCC: 3 | RNVC: 2
SOSS101: RNCC: 5 | RNVC: 2

29 Jul 2004

5340-66-033-3796
Butt Hinge

660333796
WELD0M848: RNCC: 3 | RNVC: 2

7 Dec 1969

5340-66-157-9501
Mounting Bracket

661579501
2233577: RNCC: 3 | RNVC: 2
11000051-22-4: RNCC: 5 | RNVC: 9

26 May 2009

5340-66-154-3669
Mounting Bracket

661543669
DE251560010: RNCC: 3 | RNVC: 2

5 May 2006

5340-66-144-4771
Hand Crank

661444771
FE2903-100006: RNCC: 3 | RNVC: 2

12 Nov 1998

5340-66-142-9605
Spacer Block

661429605
658/2/06496/000: RNCC: 3 | RNVC: 2

20 Mar 1997

5340-66-153-6702
Webbing Strap

661536702
9125D05043001: RNCC: 3 | RNVC: 2

11 Oct 2005

5340-66-160-4233
General Purpose Resilient Mount

661604233
BMA-A05-2068-01: RNCC: 3 | RNVC: 2

16 Jul 2012

5340-66-153-0602
Mounting Plate

661530602
LTE-A12-0010: RNCC: 3 | RNVC: 1
LTE-A12-0010-01: RNCC: 3 | RNVC: 2

11 May 2005

5340-66-157-6638
Mounting Bracket

661576638
2233580: RNCC: 3 | RNVC: 2
11000051-8-4-8: RNCC: 5 | RNVC: 2
11000051-8-4-8: RNCC: 5 | RNVC: 9

4 Feb 2009

5340-66-020-7799
Dus Protective Plug

5340-66-154-0290
Safety Clip

661540290
200751: RNCC: 3 | RNVC: 2

30 Jan 2006

5340-66-147-2199
Coale Leg Assembly

661472199
000/302/GMOWS.3030.03: RNCC: 3 | RNVC: 2

24 Nov 2000

5340-66-153-2753
Mounting Bracket

661532753
A210 0287: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-152-2612
Access Cover

661522612
BMA-A05-1477-01: RNCC: 3 | RNVC: 2

25 Sep 2004

5340-66-155-4375
Retaining Band

661554375
08034-20519: RNCC: 3 | RNVC: 2
08034-20519: RNCC: 5 | RNVC: 2

27 Mar 2007

5340-66-157-6407
Clamp Saddle

661576407
DE253280043: RNCC: 3 | RNVC: 2

28 Jan 2009

5340-66-128-1971
Webbing Strap

661281971
1505/W43157-10: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

28 Jan 1987

5340-66-150-0678
Padlock

661500678
NO PRIMARY REF 66-150-0678: RNCC: 3 | RNVC: 2
00989475: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-149-9447
Retaining Strap

661499447
NO PRIMARY REF 66-149-9447: RNCC: 3 | RNVC: 2
02416756: RNCC: 5 | RNVC: 2

10 Apr 2003

5340-66-165-0498

5340-66-164-7965

5340-66-158-6436
Electronic Equipment Hardware Kit

661586436
RM-DXC10A: RNCC: 3 | RNVC: 2
RM-DXC10A: RNCC: 5 | RNVC: 2

6 May 2010

5340-66-124-9211
Handle Mechanism

661249211
8UC4264-OLD01: RNCC: 3 | RNVC: 2

10 Jan 1986

5340-66-077-9354
Bow Handle

660779354
500: RNCC: 3 | RNVC: 1

25 Oct 1974

5340-66-134-9258
Clamping Catch

661349258
400114000R: RNCC: 3 | RNVC: 2

8 Jan 1991

5340-66-131-7359

5340-66-158-0084
Manual Control Lever

661580084
JMS2002-52-2: RNCC: 3 | RNVC: 2

17 Jun 2009

5340-66-155-3359
Mounting Bracket

661553359
DE252690007: RNCC: 3 | RNVC: 2

7 Mar 2007

5340-66-146-1983
Access Cover

661461983
472 8021-02: RNCC: 3 | RNVC: 2

10 Feb 2000

5340-66-158-8441
Synchro Clamp

661588441
DEF(AUST)8960: RNCC: 4 | RNVC: 1
403-00252: RNCC: 5 | RNVC: 2
403-00252: RNCC: 5 | RNVC: 2

25 Aug 2010

5340-66-155-6940
Mortise Latch Set

661556940
C2-32-15: RNCC: 3 | RNVC: 2

10 May 2007

5340-66-158-6839
Mounting Bracket

661586839
RAY184026-5: RNCC: 3 | RNVC: 2
RAY184026-5: RNCC: 5 | RNVC: 2

3 Jun 2010

5340-66-150-2021
Support Hook

661502021
NO PRIMARY REF 66-150-2021: RNCC: 3 | RNVC: 2
00763566: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-133-5215
Electronic Equipment Hardware Kit

661335215
418/5/52550/000: RNCC: 3 | RNVC: 2
CES13383: RNCC: 3 | RNVC: 2
MX-F113: RNCC: 5 | RNVC: 2

20 Oct 1989

5340-66-090-8006

5340-66-073-8355

5340-66-154-3916
Sto Drawbar Bracket

661543916
G02017: RNCC: 3 | RNVC: 2

12 May 2006

5340-66-054-5447
Refriger Door Catch

5340-66-032-5531
Rod End Clevis

5340-66-114-0685
Spring Tension Clip

661140685
77532: RNCC: 3 | RNVC: 2

9 May 1982

5340-66-114-8437
Extension Drawer Slide

661148437
SM1201-454: RNCC: 3 | RNVC: 2

16 Aug 1984

5340-66-148-4247
Service Pack

661484247
25-522-102: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-66-153-2721
Mounting Bracket

661532721
A210 0327: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-142-9661
Mounting Bracket

661429661
015043: RNCC: 3 | RNVC: 2
MT-F500: RNCC: 5 | RNVC: 2

14 Apr 1997

5340-66-156-0993
Mounting Bracket

661560993
471-90423-401: RNCC: 3 | RNVC: 2
511272: RNCC: 5 | RNVC: 2

24 Aug 2007

5340-66-067-1834
Stand Base

660671834
MG0M1256: RNCC: 3 | RNVC: 2
W5WEA00013: RNCC: 5 | RNVC: 9

20 Jul 1974

5340-66-160-7743
Pipe Hanger

661607743
15018918: RNCC: 3 | RNVC: 2

4 Dec 2012

5340-66-156-4542
Mounting Bracket

661564542
LAN-MD-D0059: RNCC: 3 | RNVC: 2

29 Nov 2007

5340-66-152-8012
Butt Hinge

661528012
BMA-V05-0019-01: RNCC: 3 | RNVC: 2

14 Apr 2005

5340-66-085-8607
Hinged Hasp

660858607
NO PRIMARY REF 66-085-8607: RNCC: 3 | RNVC: 2

9 Sep 1976

5340-66-158-8001
Access Cover

661588001
DEF(AUST)8767: RNCC: 4 | RNVC: 1
4512 133 69451: RNCC: 5 | RNVC: 2

4 Aug 2010

5340-66-107-3651
Console Block

661073651
01F258-11: RNCC: 3 | RNVC: 2

18 Jul 1980

Load More Results