What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Dirt And Liquid Deflector?

A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is a Hasp Staple?

A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

Hardware, Commercial - Australia (AU)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Australia (AU) - NCB is 66

Page 16 of 29

NSN Format for Hardware, Commercial
Codified by Australia

53	40	66	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Australia (AU)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 53 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 78 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 109 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 25 Items
Holder,Spring 26 Items
What is a Compression Cup? 11 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 43 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 85 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 54 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 27 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 249 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 36 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 87 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 39 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 11 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Corner Brace? 16 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Hinged Hasp? 32 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Mortise Latch Set? 15 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Rim Latch? 18 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Rim Lock? 13 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 12 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 17 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 17 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 18 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 103 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 11 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 13 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 59 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 14 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 14 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Plug Button? 12 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Corrosion Preventive Anode? 27 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 78 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 268 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 88 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 70 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 36 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 40 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 41 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Plain Solid Disk? 41 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 12 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is an Angle Bracket? 608 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 57 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 54 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 317 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 48 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 40 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 83 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Quick Release Plunger? 17 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 65 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 24 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 14 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 22 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 49 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 19 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 151 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 15 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 444 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 128 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 42 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 53 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 25 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 201 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 33 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 133 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 42 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 54 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Strapping? 28 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 75 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Screw Thread Insert And Tool Assortment? 18 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 28 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 18 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 740 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 11 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 14 Items
What is an Antipilferage Seal? 27 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 129 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Seal Retaining Plate? 29 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 47 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1862 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 15 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 11 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 10 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Plate? 766 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 14 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 27 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 65 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 79 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 71 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 22 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 12 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Caster Wheel? 14 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 35 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 50 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 28 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 15 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is a Lock Key? 20 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 11 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 83 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Access Door? 138 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 393 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 38 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 11 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 22 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
What is a Key Blank? 22 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 10 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 114 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 11 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Tie Down Adapter? 11 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Locking Stay? 20 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 12 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is a Bumper? 74 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 16 of 29

5340-66-159-0846
Mounting Bracket

661590846
471-RH000-114-T04: RNCC: 3 | RNVC: 2
1730150: RNCC: 5 | RNVC: 2

2 Feb 2011

5340-66-157-5220
Lock-Release Lever

661575220
V0507-CE-0047: RNCC: 3 | RNVC: 2

9 Dec 2008

5340-66-160-3248
General Purpose Resilient Mount

661603248
BP5685882: RNCC: 3 | RNVC: 2

7 Jun 2012

5340-66-096-9033
Rigid Caster

660969033
L421: RNCC: 3 | RNVC: 2

13 Feb 1970

5340-66-142-5670
Mounting Bracket

661425670
016AMR375-1: RNCC: 3 | RNVC: 2

23 Oct 1996

5340-66-085-4861
Manual Control Lever

660854861
706-169: RNCC: 3 | RNVC: 2

21 Mar 1975

5340-66-156-1049
Mechanical Stop

661561049
471-90423-58: RNCC: 3 | RNVC: 2
524194: RNCC: 5 | RNVC: 2

28 Aug 2007

5340-66-157-4958
Mechanical Stop

661574958
V01-17-03-01-01: RNCC: 3 | RNVC: 2

1 Dec 2008

5340-66-046-6200
Access Cover

660466200
310004: RNCC: 3 | RNVC: 2

25 May 1972

5340-66-091-1311
Expansion Shield

660911311
S04: RNCC: 3 | RNVC: 1

17 Apr 1977

5340-66-011-6326
Rod End Connector

5340-66-153-0784
Snap Hook

661530784
CMHL10N: RNCC: 3 | RNVC: 2

1 Jun 2005

5340-66-143-7829
Mounting Bracket

661437829
MEA 727-14: RNCC: 3 | RNVC: 2

7 Aug 1997

5340-66-118-6723
Spring Tension Clip

661186723
30701-883-000: RNCC: 3 | RNVC: 2

30 Mar 1984

5340-66-152-0200
Mounting Bracket

661520200
BMA-A05-0451-01: RNCC: 3 | RNVC: 2

14 Sep 2004

5340-66-118-3688
Synchro Clamp

661183688
161-06003: RNCC: 3 | RNVC: 2

27 Mar 1984

5340-66-160-6783
Mounting Plate

661606783
PN108055: RNCC: 3 | RNVC: 2

15 Oct 2012

5340-66-157-1505
Mounting Bracket

661571505
DA90199002: RNCC: 3 | RNVC: 2

18 Aug 2008

5340-66-143-4443
Plug

661434443
493143: RNCC: 3 | RNVC: 2

6 May 1998

5340-66-042-3195
Mounting Bracket

660423195
756-3279-003: RNCC: 3 | RNVC: 2

23 Aug 1971

5340-66-128-9493
Switch Holder

661289493
EX20051119: RNCC: 3 | RNVC: 2

23 Apr 1987

5340-66-158-6859
Loop Clamp

661586859
RAY300006-1: RNCC: 3 | RNVC: 2
RAY300006-1: RNCC: 5 | RNVC: 2

4 Jun 2010

5340-66-050-5330
Shelf Bracket

660505330
C4W1951-1: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

14 May 1972

5340-66-025-7546
Air Inlet-Out Frame

5340-66-130-9112
General Purpose Resilient Mount

661309112
M17-1396-60: RNCC: 3 | RNVC: 2

2 Aug 1988

5340-66-147-4198
Mounting Plate

661474198
22-0774A-21: RNCC: 3 | RNVC: 2
0774D36: RNCC: 3 | RNVC: 2

8 May 2001

5340-66-153-6795
Rim Lock

661536795
47110611122-001: RNCC: 3 | RNVC: 2

12 Oct 2005

5340-66-125-2435
Webbing Strap

5340-66-013-8079
Webbing Equipm Hook

5340-66-100-8851
Dust And Moisture Seal Protective Cap

661008851
363PVA45001DET27SH4: RNCC: 3 | RNVC: 2

16 Mar 1979

5340-66-037-6082
Retaining Strap

660376082
NBD159B: RNCC: 3 | RNVC: 2

7 Oct 1970

5340-66-134-4279
Tilt Switch Plate

661344279
704-48229-00: RNCC: 3 | RNVC: 2

9 Oct 1991

5340-66-082-6386
Nonmetallic Bumper

660826386
FWV10408: RNCC: 3 | RNVC: 2

29 Nov 1974

5340-66-137-7235
Extension Leg

661377235
1383-12/2D: RNCC: 3 | RNVC: 2

23 Mar 1993

5340-66-144-7367
Dust And Moisture Seal Protective Cap

661447367
C31-A05-103-009: RNCC: 3 | RNVC: 2

15 Feb 1999

5340-66-155-6774
Access Cover

661556774
NMX-10-18-24-03-10: RNCC: 3 | RNVC: 2
NMX1018240310: RNCC: 5 | RNVC: 2

7 May 2007

5340-66-146-9594
Manual Control Lever

661469594
AC181: RNCC: 3 | RNVC: 2

24 Oct 2000

5340-66-158-1691
Access Cover

661581691
BDI 30400-3-1: RNCC: 3 | RNVC: 2

11 Sep 2009

5340-66-150-2027
Support Hook

661502027
NO PRIMARY REF 66-150-2027: RNCC: 3 | RNVC: 2
04411103: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-145-9605
Connector

661459605
BD-75-NG: RNCC: 3 | RNVC: 2

26 Oct 2001

5340-66-157-4292
General Purpose Access Door

661574292
468-02-0202A4: RNCC: 3 | RNVC: 2

19 Nov 2008

5340-66-085-8619
Retaining Strap

660858619
NO PRIMARY REF 66-085-8619: RNCC: 3 | RNVC: 2

7 May 1976

5340-66-150-5767
General Purpose Resilient Mount

661505767
NO PRIMARY REF 66-150-5767: RNCC: 3 | RNVC: 2
04932019: RNCC: 5 | RNVC: 2

16 Apr 2003

5340-66-139-3696
Sliding Block

661393696
SCES17900ITEM7: RNCC: 3 | RNVC: 2

13 Sep 1994

5340-66-089-5373
Retaining Clip

5340-66-161-1643
Mechanical Stop

661611643
15008081: RNCC: 3 | RNVC: 2

10 Jul 2013

5340-66-160-2732
Access Cover

661602732
211-1700: RNCC: 3 | RNVC: 2

23 May 2012

5340-66-157-3098
Butt Hinge

661573098
1000078: RNCC: 3 | RNVC: 2
LLH-16501024GV-HL: RNCC: 5 | RNVC: 2

7 Oct 2008

5340-66-157-7170
Double Angle Bracket

661577170
HYG6591: RNCC: 3 | RNVC: 2

24 Feb 2009

5340-66-156-6052
Bag Retainer

661566052
P10009-1-2: RNCC: 3 | RNVC: 2

5 Feb 2008

5340-66-138-6934
Support Bracket

661386934
120270-03730: RNCC: 3 | RNVC: 2

18 Mar 1994

5340-66-150-5349
Pipe Hanger

661505349
NO PRIMARY REF 66-150-5349: RNCC: 3 | RNVC: 2
03581500: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-161-2293
Flange Protector

661612293
44000P: RNCC: 3 | RNVC: 2

1 Aug 2013

5340-66-135-0024
Mounting Plate

661350024
400104008: RNCC: 3 | RNVC: 2

24 Jan 1991

5340-66-106-0183
Strap-Rope-Cab Loop

5340-66-145-4186
Keeper Pin Assembly

661454186
HKA100: RNCC: 3 | RNVC: 2

10 Aug 1999

5340-66-160-9168
Lock Bar

661609168
15020275: RNCC: 3 | RNVC: 2

6 Mar 2013

5340-66-154-7860
Headless Straight Rod

661547860
532.21.09.029: RNCC: 3 | RNVC: 2

5 Sep 2006

5340-66-160-6539
Angle Bracket

661606539
ID25-245: RNCC: 3 | RNVC: 2

3 Oct 2012

5340-66-157-6311
Tab Plate

661576311
DE253280048: RNCC: 3 | RNVC: 2

23 Jan 2009

5340-66-138-2183
Angle Bracket

661382183
576.10.09.038: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-66-137-3503
Mechanical Standoff

661373503
21-90036: RNCC: 3 | RNVC: 2

22 Dec 1992

5340-66-140-6738
Brackets Bolted

661406738
DE250530351: RNCC: 3 | RNVC: 2

27 Feb 1996

5340-66-157-2271
Mounting Bracket

661572271
11MK39435M: RNCC: 3 | RNVC: 2
11MK39435M: RNCC: 5 | RNVC: 2

10 Sep 2008

5340-66-141-0334
Nonmetallic Bumper

661410334
471-51805-108: RNCC: 3 | RNVC: 2
1475782: RNCC: 5 | RNVC: 2

18 Aug 1995

5340-66-159-5644
Access Cover

661595644
B10084-096: RNCC: 3 | RNVC: 2

26 Sep 2011

5340-66-143-3372
Locknut

661433372
37-10664: RNCC: 3 | RNVC: 2
37-10664: RNCC: 5 | RNVC: 2

15 Apr 1998

5340-66-157-3179
Access Cover

661573179
MM-0080-Z366: RNCC: 3 | RNVC: 2

8 Oct 2008

5340-66-117-7269
General Purpose Resilient Mount

661177269
DF650/75SS2C: RNCC: 3 | RNVC: 2

28 Jun 1983

5340-66-155-4144
Mount Resi Stopper

661554144
201-01-61160: RNCC: 3 | RNVC: 2
201-01-61160: RNCC: 5 | RNVC: 2

23 Mar 2007

5340-66-138-9756
Mounting Bracket

661389756
JAYB0004: RNCC: 3 | RNVC: 2

21 Dec 1993

5340-66-132-0801
Cable Gland Plate

661320801
A012791 SHEET 10: RNCC: 3 | RNVC: 2

20 Mar 1989

5340-66-139-4978
Left Side Slide

661394978
004-008-3: RNCC: 3 | RNVC: 2

25 Oct 1995

5340-66-152-6808
Mounting Bracket

661526808
NALM00397-1: RNCC: 3 | RNVC: 2
NALM00397-1: RNCC: 5 | RNVC: 1

10 Mar 2005

5340-66-156-6225
Butt Hinge

661566225
RWB2276: RNCC: 3 | RNVC: 2

13 Feb 2008

5340-66-028-5275
Filler Assy Insert

660285275
CA30018: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-148-6047
Block Clamp

661486047
306117: RNCC: 3 | RNVC: 2
306117: RNCC: 5 | RNVC: 2

11 Mar 2003

5340-66-158-7563
Mounting Bracket

661587563
BMA-A13-0078-01: RNCC: 3 | RNVC: 2

28 Jul 2010

5340-66-155-3616
Mounting Bracket

661553616
471-40217-111: RNCC: 3 | RNVC: 2
508655: RNCC: 5 | RNVC: 2

13 Mar 2007

5340-66-154-6778
Access Cover

661546778
VTR251-2TSUB14F4T19-7IIINM40W3P-: RNCC: 3 | RNVC: 1

11 Aug 2006

5340-66-161-0551
Mounting Bracket

661610551
ARLM1274-03: RNCC: 3 | RNVC: 2

7 May 2013

5340-66-157-4589
Lock Key

661574589
MH2149-1321: RNCC: 3 | RNVC: 2
149-1000 ITEM 174: RNCC: 5 | RNVC: 2
21491321: RNCC: 5 | RNVC: 2

26 Nov 2008

5340-66-147-9201
Grease Sampling Kit

661479201
AC957: RNCC: 3 | RNVC: 2
GREASE SAMPLING KIT: RNCC: 3 | RNVC: 2

20 Dec 2001

5340-66-159-1551
Loop Clamp

661591551
EN4113S04WR: RNCC: 3 | RNVC: 2

15 Mar 2011

5340-66-156-4844
Electronic Equipment Hardware Kit

661564844
61247070: RNCC: 3 | RNVC: 2

10 Dec 2007

5340-66-134-7766
General Purpose Access Door

661347766
DE58016060: RNCC: 3 | RNVC: 2

8 Jun 1990

5340-66-142-7758
Access Cover

661427758
M3-89: RNCC: 3 | RNVC: 2
DF25-142-1: RNCC: 3 | RNVC: 2

27 Nov 1996

5340-66-157-2416
Mounting Plate

661572416
DE253020004-3: RNCC: 3 | RNVC: 2

12 Sep 2008

5340-66-158-6802
Mounting Bracket

661586802
RAY184022-3: RNCC: 3 | RNVC: 2
RAY184022-3: RNCC: 5 | RNVC: 2

3 Jun 2010

5340-66-158-6757
Mounting Plate

661586757
RAY184007-1: RNCC: 3 | RNVC: 2
RAY184007-1: RNCC: 5 | RNVC: 2

1 Jun 2010

5340-66-065-1437
Angle Bracket

5340-66-038-2528
Retaining Clip

5340-66-037-8574
Handwheel

5340-66-070-6983
Angle Bracket

660706983
0554-162126: RNCC: 3 | RNVC: 2

8 May 1974

5340-66-128-6373
Dust And Moisture Seal Boot

661286373
AYG8162: RNCC: 3 | RNVC: 2

13 Mar 1992

5340-66-036-9895
Retaining Strap

660369895
EDE168: RNCC: 3 | RNVC: 2

16 Sep 1970

5340-66-086-4048
Spring Tension Clip

660864048
8-167: RNCC: 3 | RNVC: 2

3 Nov 1976

5340-66-049-7995
Turnbuckle

660497995
SPS2550: RNCC: 3 | RNVC: 2

18 Sep 1972

5340-66-155-5985
Drive Plate

661555985
160366: RNCC: 3 | RNVC: 2

23 Apr 2007

5340-66-140-5818
Block Assembly

661405818
004-151: RNCC: 3 | RNVC: 2

26 Oct 1995

5340-66-158-1041
Access Cover

661581041
471-PPJ00-102: RNCC: 3 | RNVC: 2
1707474: RNCC: 5 | RNVC: 2

19 Aug 2009

5340-66-158-7889
Mounting Bracket

661587889
129-1145: RNCC: 3 | RNVC: 2

3 Aug 2010

5340-66-150-0773
Expansion Shield

661500773
NO PRIMARY REF 66-150-0773: RNCC: 3 | RNVC: 2
01794205: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-158-4312
Dust And Moisture Seal Protective Cap-Plug

661584312
MLC-0197: RNCC: 3 | RNVC: 2

13 Jan 2010

5340-66-160-2167
Catch Strike

661602167
BMA-A05-1691-01: RNCC: 3 | RNVC: 2

30 Apr 2012

5340-66-153-3367
Manual Control Handle

661533367
51.31.0184: RNCC: 3 | RNVC: 2

19 Jul 2005

5340-66-160-2845
Dust And Moisture Seal Protective Cap

661602845
FP040: RNCC: 3 | RNVC: 2
121070: RNCC: 5 | RNVC: 2

25 May 2012

5340-66-130-3294
Nonmetallic Bumper

661303294
3877: RNCC: 3 | RNVC: 2

18 Mar 1988

5340-66-138-6404
Cabinet Door Brace

661386404
8613662: RNCC: 3 | RNVC: 2
3193662: RNCC: 3 | RNVC: 2
8613662: RNCC: 5 | RNVC: 2

2 Mar 1994

5340-66-087-7499
Plug Button

660877499
1213-24563: RNCC: 3 | RNVC: 2

7 Apr 1975

5340-66-147-2456
General Purpose Resilient Mount

661472456
M510-5854040: RNCC: 3 | RNVC: 2
02315311: RNCC: 5 | RNVC: 2

7 Dec 2000

5340-66-101-5743
Mounting Plate

661015743
114-102: RNCC: 3 | RNVC: 2

22 May 1979

5340-66-155-4181
Mounting Bracket

661554181
BME-A05-0199-01: RNCC: 3 | RNVC: 2

23 Mar 2007

5340-66-155-5054
Handle Grip

661555054
29062: RNCC: 3 | RNVC: 2

3 Apr 2007

5340-66-147-7931
Hydraulic Tan Cover

661477931
F/2888-560-004B: RNCC: 3 | RNVC: 2
Q EDE F/2888-560-004B: RNCC: 5 | RNVC: 2

24 Sep 2001

5340-66-134-2380
Loop Clamp

661342380
HTLT307507-B-588: RNCC: 3 | RNVC: 2

27 Jun 1991

5340-66-019-5635
Expansion Plug

660195635
TYPE A: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-155-8465
Runner

661558465
471-51805-131: RNCC: 3 | RNVC: 2
504291: RNCC: 5 | RNVC: 2

15 Jun 2007

5340-66-147-2921
Stbd King Post

661472921
MH-A186-0001-A3: RNCC: 3 | RNVC: 2

6 Feb 2001

5340-66-146-7805
End Cover

661467805
ST AB1 2440: RNCC: 3 | RNVC: 2

18 Sep 2000

5340-66-153-7850
T Bracket

661537850
47110017707-111: RNCC: 3 | RNVC: 2

31 Oct 2005

5340-66-154-8055
Quick Release Plunger

661548055
15007653: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-66-153-2237
Mounting Bracket

661532237
DE282180038: RNCC: 3 | RNVC: 2

22 Jun 2005

5340-66-153-9866
Electronic Equipment Hardware Kit

661539866
32MR39469M: RNCC: 3 | RNVC: 2

11 Jan 2006

5340-66-075-4940
Dust And Moisture Seal Protective Cap

660754940
16D8027: RNCC: 3 | RNVC: 2

28 Jul 1974

5340-66-146-3268
Handle Plate

661463268
2386-46940-00: RNCC: 3 | RNVC: 2
2386-46940-00: RNCC: 5 | RNVC: 2

6 Apr 2000

5340-66-100-2111

5340-66-132-0842
Buckle

661320842
OM0-142366-L: RNCC: 3 | RNVC: 2

22 Mar 1989

5340-66-155-3128
Retaining Clip

661553128
P10048-15: RNCC: 3 | RNVC: 2

27 Feb 2007

5340-66-154-6399
General Purpose Resilient Mount

661546399
471-20201-6: RNCC: 3 | RNVC: 2
511829: RNCC: 5 | RNVC: 2

1 Aug 2006

5340-66-146-9094
Crankarm

661469094
KH-AF-1: RNCC: 3 | RNVC: 2

4 Oct 2000

5340-66-160-3809
Angle Bracket

661603809
571.10.09.464: RNCC: 3 | RNVC: 2

2 Jul 2012

5340-66-161-1620
Webbing Strap

661611620
10008204: RNCC: 3 | RNVC: 2

9 Jul 2013

5340-66-111-3389
Fall Flap Hinge

5340-66-087-6630
Butt Hinge

660876630
1213-26516: RNCC: 3 | RNVC: 2
MCCALLUM B6.32: RNCC: 5 | RNVC: 2
04085102: RNCC: 5 | RNVC: 2

20 Apr 1975

5340-66-142-0021
Manual Control Lever

661420021
AFP001: RNCC: 3 | RNVC: 2

12 Feb 1996

5340-66-148-3692
Safety Latch Assemb

661483692
EZ 1423: RNCC: 3 | RNVC: 2
Q PAL EZ 1423: RNCC: 5 | RNVC: 2
EZ 1423: RNCC: 5 | RNVC: 2

21 Feb 2002

5340-66-153-7822
Mounting Bracket

661537822
944485-2: RNCC: 3 | RNVC: 2
944485-2: RNCC: 5 | RNVC: 2
944485-2: RNCC: 5 | RNVC: 2

28 Oct 2005

5340-66-042-6277
Antipilferage Seal

5340-66-144-9409
Spacing Threaded Standoff

661449409
SPA01-3-M3-30: RNCC: 3 | RNVC: 2

25 May 1999

5340-66-128-6511
Multiple Angle Bracket

661286511
03546: RNCC: 3 | RNVC: 2

17 May 1993

5340-66-134-3242
Door Handle

661343242
A200230 SHEET 1 OF 2 ITEM 4: RNCC: 3 | RNVC: 2

7 Aug 1991

5340-66-147-2405
Electrical C Mount

661472405
002/1001/GMOWS.1001.S1: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-66-019-5630
Expansion Plug

660195630
TYPE A: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-145-2147
Mounting Bracket

661452147
NEO128-A: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-66-039-4714
Angle Bracket

5340-66-065-1514
Rack Mounti Bracket

5340-66-043-7223
Loop Clamp

5340-66-039-2201
Access Door Hinge

5340-66-027-8640
Mounting Plate

5340-66-139-4463
Electronic Equipment Hardware Kit

661394463
MX-F217: RNCC: 3 | RNVC: 2
DE530020001: RNCC: 3 | RNVC: 2

24 Jan 1995

5340-66-060-1870
Nylon Clip

660601870
SBC8: RNCC: 3 | RNVC: 2

18 Jun 1973

5340-66-133-2702
Machined Bracket

661332702
530864-5: RNCC: 3 | RNVC: 2

5 Jun 1996

5340-66-088-5098
Mount Resil Ferrule

660885098
13-26220: RNCC: 3 | RNVC: 2

1 Feb 1976

5340-66-060-1872
Butt Hinge

660601872
SBC10: RNCC: 3 | RNVC: 2

18 Jun 1973

5340-66-051-7329
Pipe Hanger

5340-66-065-4337
Dust And Moist Boot

5340-66-156-0211
Mounting Bracket

661560211
ARLM0594-1: RNCC: 3 | RNVC: 2

25 Jul 2007

5340-66-142-5121
General Purpose Resilient Mount

661425121
H48-127-80-110-10FF: RNCC: 3 | RNVC: 2

26 Sep 1996

5340-66-149-9448
Retaining Strap

661499448
NO PRIMARY REF 66-149-9448: RNCC: 3 | RNVC: 2
02416461: RNCC: 5 | RNVC: 2

10 Apr 2003

5340-66-088-1820
Butt Hinge

660881820
1213-251235: RNCC: 3 | RNVC: 2

20 Apr 1975

5340-66-146-1787
Insert Face

661461787
H70914-5-1: RNCC: 3 | RNVC: 2

11 Feb 2000

5340-66-157-4135
Mounting Bracket

661574135
ATS138003: RNCC: 3 | RNVC: 2

13 Nov 2008

5340-66-128-2044
Extens Drawer Slide

5340-66-160-7631
Mounting Bracket

661607631
0100-11562: RNCC: 3 | RNVC: 2

29 Nov 2012

5340-66-049-8059
Locating Rod Hinge

660498059
3206-2-23: RNCC: 3 | RNVC: 2

3 Jun 1972

5340-66-147-7924
Pivot Casting

661477924
F/2888-550-033B: RNCC: 3 | RNVC: 2
Q EDE F/2888-550-033B: RNCC: 5 | RNVC: 2

24 Sep 2001

5340-66-157-7315
Access Cover

661577315
503 81 77-01: RNCC: 3 | RNVC: 2
503 81 77-01: RNCC: 5 | RNVC: 2

2 Mar 2009

5340-66-140-3962
Manual Control Handle

661403962
FE85086A-125S: RNCC: 3 | RNVC: 2

24 Mar 1995

5340-66-157-1146
Corrosion Preventive Anode

661571146
3039255: RNCC: 3 | RNVC: 2
50-Z: RNCC: 5 | RNVC: 2

30 Jul 2008

5340-66-132-7391
Guide Assembly

5340-66-145-8505
Handle Assembly

661458505
AE84003R: RNCC: 3 | RNVC: 2
AE84003-4: RNCC: 3 | RNVC: 2

7 Dec 1999

5340-66-085-5052
Plate

660855052
5-10-45D: RNCC: 3 | RNVC: 2

8 Jan 1976

5340-66-160-7828
Mounting Bracket

661607828
MAKB14/ITEM:06: RNCC: 3 | RNVC: 2

7 Dec 2012

5340-66-155-8851
Mounting Bracket

661558851
471-50807-175: RNCC: 3 | RNVC: 2
506077: RNCC: 5 | RNVC: 2

25 Jun 2007

5340-66-150-5063
Strap Hinge Leaf

661505063
NO PRIMARY REF 66-150-5063: RNCC: 3 | RNVC: 2
04081504: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-137-2826
Spring Tension Clip

661372826
0110159000000D0: RNCC: 3 | RNVC: 2

31 Oct 1992

5340-66-131-7406
Manual Control Lever

661317406
576.10.09.101: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-66-102-4656
Turnbuckle

661024656
EK015: RNCC: 3 | RNVC: 2

9 Dec 1979

5340-66-122-9600
General Purpose Resilient Mount

5340-66-122-6050
Bracket

5340-66-142-0266
Angle Bracket

661420266
TBM-343: RNCC: 3 | RNVC: 2

16 Feb 1996

5340-66-151-1037
Mounting Plate

661511037
LTA-A09-019-001: RNCC: 3 | RNVC: 2
LTA-A09-019: RNCC: 5 | RNVC: 2

27 May 2003

5340-66-157-7151
Mounting Bracket

661577151
AYG3656: RNCC: 3 | RNVC: 2

24 Feb 2009

5340-66-158-7286
Beam Gripping Clamp

661587286
LC-1: RNCC: 3 | RNVC: 2

6 Jul 2010

5340-66-131-5284
T-Bolt Clamp

5340-66-093-4082

5340-66-025-4685
Retaining Strap

5340-66-150-0663

5340-66-160-2561
Double Angle Bracket

661602561
ARLM0791-1: RNCC: 3 | RNVC: 2

11 May 2012

5340-66-144-7269
Nut And Bolt Locking Plate

661447269
MHC1130-3: RNCC: 3 | RNVC: 2

14 Jan 1999

5340-66-148-3810
Manifold Cooler Inl

661483810
F/2888-560-005B: RNCC: 3 | RNVC: 2
Q EDE F/2888-560-005B: RNCC: 5 | RNVC: 2

25 Feb 2002

5340-66-143-8441
Electronic Equipment Hardware Kit

661438441
MX-F152: RNCC: 3 | RNVC: 2
DE530020042: RNCC: 3 | RNVC: 2
DE530020042: RNCC: 3 | RNVC: 2

15 Aug 1997

5340-66-161-0384
Mounting Bracket

661610384
BP5685547: RNCC: 3 | RNVC: 2

1 May 2013

5340-66-159-6338
Mounting Plate

661596338
S8-481-317: RNCC: 3 | RNVC: 2

15 Nov 2011

5340-66-150-0676
Padlock

661500676
NO PRIMARY REF 66-150-0676: RNCC: 3 | RNVC: 2
00989424: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-066-3132
Retaining Strap

660663132
KFG99: RNCC: 3 | RNVC: 2
FG99: RNCC: 5 | RNVC: 2

29 May 1974

5340-66-027-6415
Spring Tension Clip

5340-66-027-4006
Helical Compre Seat

5340-66-155-9508
Butt Hinge

661559508
ARC34233: RNCC: 3 | RNVC: 2
FADD04729219: RNCC: 5 | RNVC: 2
04729219: RNCC: 5 | RNVC: 2

9 Jul 2007

5340-66-156-5649
Runner

661565649
7512220: RNCC: 3 | RNVC: 2
15013030: RNCC: 5 | RNVC: 2

17 Jan 2008

5340-66-032-0688
Expansion Plug

660320688
305243: RNCC: 3 | RNVC: 1
305243: RNCC: 3 | RNVC: 2

22 Apr 1969

5340-66-114-5291
Electronic Equipment Hardware Kit

661145291
MSFSPARESPACKAGE: RNCC: 3 | RNVC: 2

26 May 1983

5340-66-154-6319
Pin Guide

661546319
6-211-121: RNCC: 3 | RNVC: 2
6-211-121: RNCC: 5 | RNVC: 2

31 Jul 2006

5340-66-161-3766
Swivel Caster

661613766
FB2400-37: RNCC: 3 | RNVC: 2

2 Oct 2013

5340-66-155-6429
Loop Clamp

661556429
8216012: RNCC: 3 | RNVC: 2
5554-8216012: RNCC: 5 | RNVC: 2

1 May 2007

5340-66-161-2402
Mounting Bracket

661612402
BP5685501: RNCC: 3 | RNVC: 2

6 Aug 2013

5340-66-148-4241
Plate Winder

661484241
25-110-103: RNCC: 3 | RNVC: 2

11 Apr 2002

5340-66-129-7956
General Purpose Resilient Mount

661297956
SCA15514-01: RNCC: 3 | RNVC: 2

29 Sep 2000

5340-66-068-0658
Clamp

660680658
317-0098: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

7 Aug 1974

5340-66-032-0386
Bow Handle

5340-66-147-8448
Shock Mount Pad

5340-66-150-0644
Padlock

661500644
NO PRIMARY REF 66-150-0644: RNCC: 3 | RNVC: 2
04072801: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-154-8099
Mounting Plate

661548099
15007761: RNCC: 3 | RNVC: 2

8 Sep 2006

5340-66-155-9973
Angle Bracket

661559973
DA85136002: RNCC: 3 | RNVC: 2

20 Jul 2007

5340-66-147-3775
Mounting Bracket

661473775
0030300094: RNCC: 3 | RNVC: 2

11 Apr 2001

5340-66-151-7395
Retaining Clip

661517395
BHE 03016: RNCC: 3 | RNVC: 2

16 Jan 2004

5340-66-144-5227
Mounting Bracket

661445227
A209142-4F: RNCC: 3 | RNVC: 2

3 Dec 1998

5340-66-161-3577
Block Clamp

661613577
SP 535 PP DP-AS M W3: RNCC: 3 | RNVC: 2
SP 535,0 PP DP AS M W3 CLAMP: RNCC: 5 | RNVC: 2

23 Sep 2013

5340-66-158-7802
Mounting Plate

661587802
1216-2539: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-66-139-4975
Slide Track Support

661394975
004-007-1: RNCC: 3 | RNVC: 2

23 Oct 1995

5340-66-142-6374
General Purpose Access Door

661426374
226904-2: RNCC: 3 | RNVC: 2

14 Dec 1996

5340-66-146-3631
Shaft Nut And Lock

661463631
CR600004 ITEM 8: RNCC: 3 | RNVC: 2

13 Apr 2000

5340-66-140-4163
Hand Crank

661404163
FE85087A100X9: RNCC: 3 | RNVC: 1

3 Apr 1995

5340-66-148-8803
Retainer

661488803
EH0083: RNCC: 3 | RNVC: 2

12 Nov 2002

5340-66-078-7839
Expansion Plug

660787839
200391: RNCC: 3 | RNVC: 2

26 Sep 1974

5340-66-154-8512
Blank Panel

661548512
15010478-04: RNCC: 3 | RNVC: 2

19 Sep 2006

5340-66-159-6437
Mounting Plate

661596437
043171A-00: RNCC: 3 | RNVC: 2

18 Nov 2011

5340-66-147-9404
Female Camlock To B

661479404
AD065: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-66-114-5445
Access Cover

661145445
2032474-1: RNCC: 3 | RNVC: 2
2032474-1: RNCC: 3 | RNVC: 2

26 Jul 1983

5340-66-128-6358
Special Hinge

661286358
HYG4078: RNCC: 3 | RNVC: 2

12 Mar 1992

5340-66-160-6544
Section Block Clamp

661606544
ID25-274: RNCC: 3 | RNVC: 2

3 Oct 2012

5340-66-086-8082
Spacing Threaded Standoff

660868082
ADE(W)67-1316 ISSUE 1: RNCC: 3 | RNVC: 2

20 Apr 1975

5340-66-134-6246
Manual Control Lever

661346246
796-14583-00: RNCC: 3 | RNVC: 2

18 Dec 1991

5340-66-154-6269
Leakproof Seal Plug

661546269
6-086-3282: RNCC: 3 | RNVC: 2
6-086-3282: RNCC: 5 | RNVC: 2

31 Jul 2006

5340-66-146-2010
Mounting Bracket

661462010
472 8091-01: RNCC: 3 | RNVC: 2

11 Feb 2000

5340-66-154-4574
Hand Carrying Strap Assembly

661544574
SOS-5111P: RNCC: 3 | RNVC: 2

5 Jun 2006

5340-66-161-2645
Cushioning Pad

661612645
1600-02-0103C3-03: RNCC: 3 | RNVC: 2
QVRL1600020103C303: RNCC: 5 | RNVC: 2

12 Aug 2013

5340-66-123-6680
Tyr Portable Stand

661236680
AMR/SEM/202: RNCC: 3 | RNVC: 1
AMR/SEM/202: RNCC: 3 | RNVC: 1

1 Sep 1998

5340-66-159-4309
Mounting Plate

661594309
BMU-A05-3090B01: RNCC: 3 | RNVC: 2

11 Jul 2011

5340-66-131-4497
Strap Assembly

661314497
DE580170650: RNCC: 3 | RNVC: 2

28 Oct 1988

5340-66-135-3268
Spring Tension Clip

5340-66-140-5747
Lock Key

5340-66-155-4970
Access Cover

661554970
196630-02720: RNCC: 3 | RNVC: 2

3 Apr 2007

5340-66-152-1792
Mounting Bracket

661521792
DTSA3TL: RNCC: 3 | RNVC: 2
MLC-0453: RNCC: 5 | RNVC: 2

14 Aug 2004

5340-66-147-8588
Spade Leg

661478588
F/2888-520-015B: RNCC: 3 | RNVC: 2
Q EDE F/2888-520-015B: RNCC: 5 | RNVC: 2

25 Sep 2001

5340-66-160-1133
Electronic Equipment Hardware Kit

661601133
PN107503: RNCC: 3 | RNVC: 2

3 Apr 2012

5340-66-146-0875
Access Cover

661460875
438 0699-01: RNCC: 3 | RNVC: 2

13 Jan 2000

5340-66-146-3520
Strap

5340-66-155-4682
Webbing Strap

661554682
BME-A05-1476-01: RNCC: 3 | RNVC: 2

29 Mar 2007

5340-66-140-8917
General Purpose Resilient Mount

661408917
P471-90200-101T08: RNCC: 3 | RNVC: 2

30 May 1995

5340-66-153-7789
Loop Clamp

661537789
121563-1: RNCC: 3 | RNVC: 2
121563-1: RNCC: 5 | RNVC: 2
121563-1: RNCC: 5 | RNVC: 2

28 Oct 2005

5340-66-159-2552
Access Cover

661592552
WST0402: RNCC: 3 | RNVC: 2
FLEXITANK WST0402: RNCC: 3 | RNVC: 2

2 May 2011

5340-66-125-3184
General Purpose Access Door

661253184
DE580160623: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

7 Mar 1986

5340-66-151-8491

5340-66-129-3254
Angle Bracket

661293254
01DML0004/002 ITEM 11: RNCC: 3 | RNVC: 2
DSD0004/02 SHEET 3 ITEM 11: RNCC: 3 | RNVC: 2

18 Dec 1987

5340-66-150-8089
Multiple Angle Bracket

661508089
LTA-A05-213-001: RNCC: 3 | RNVC: 2

17 Apr 2003

5340-66-152-5007
Dust And Moisture Seal Protective Cap

661525007
F1303-007540: RNCC: 3 | RNVC: 2

24 Feb 2005

5340-66-156-0226
Webbing Strap

661560226
471-40226-908T01: RNCC: 3 | RNVC: 2
522562: RNCC: 5 | RNVC: 2

25 Jul 2007

5340-66-155-9282
Lock-Release Lever

661559282
471-50809-210T02: RNCC: 3 | RNVC: 2
502646: RNCC: 5 | RNVC: 2

2 Jul 2007

5340-66-155-6315
Rod End Connector

661556315
471-30204-901: RNCC: 3 | RNVC: 2

30 Apr 2007

5340-66-156-1047
Access Door Hinge

661561047
471-90423-955: RNCC: 3 | RNVC: 2
524196: RNCC: 5 | RNVC: 2

28 Aug 2007

5340-66-142-6702
Mounting Bracket

661426702
DSA-10-389-17: RNCC: 3 | RNVC: 2
DSA-10-389-17: RNCC: 3 | RNVC: 2

20 Jan 1997

5340-66-155-8412
Retaining Strap

661558412
471-50810-138: RNCC: 3 | RNVC: 2
506949: RNCC: 5 | RNVC: 2

14 Jun 2007

5340-66-161-2703
Mounting Bracket

661612703
15017915: RNCC: 3 | RNVC: 2

13 Aug 2013

5340-66-155-6157
Mounting Bracket

661556157
ARLM0871: RNCC: 3 | RNVC: 2

24 Apr 2007

5340-66-062-9083
Nonmetallic Bumper

660629083
RUBBER BUMPER: RNCC: 3 | RNVC: 1

25 Jun 1974

5340-66-160-9191
Mounting Bracket

661609191
S06-B: RNCC: 3 | RNVC: 2

6 Mar 2013

5340-66-132-3563
Access Cover

661323563
016AMR270-1: RNCC: 3 | RNVC: 2
016AMR287 ITEM 5: RNCC: 3 | RNVC: 2

28 Nov 1989

5340-66-154-6248
General Purpose Access Door

661546248
471-51631-11: RNCC: 3 | RNVC: 2
524514: RNCC: 5 | RNVC: 2

28 Jul 2006

5340-66-161-3100
Caster Wheel

661613100
PU849-M20: RNCC: 3 | RNVC: 2

4 Sep 2013

5340-66-150-6049
Superjaws

661506049
NO PRIMARY REF 66-150-6049: RNCC: 3 | RNVC: 2
04620957: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-158-7693
Access Cover

661587693
BMA-A05-1103-02: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-66-156-7253
Mounting Bracket

661567253
BMF-A05-1616-01: RNCC: 3 | RNVC: 2

7 Mar 2008

5340-66-156-5256
Runner

661565256
471-62810-130: RNCC: 3 | RNVC: 2
501409: RNCC: 5 | RNVC: 2

18 Dec 2007

5340-66-157-1464
Key

661571464
AG-A0212: RNCC: 3 | RNVC: 2

14 Aug 2008

5340-66-158-0260
Mortise Latch Set

661580260
7FD8000A45G03: RNCC: 3 | RNVC: 2

24 Jun 2009

5340-66-140-6850
General Purpose Resilient Mount

661406850
DAQ01: RNCC: 3 | RNVC: 2
M211SP: RNCC: 5 | RNVC: 2
10400225: RNCC: 5 | RNVC: 2

28 Jul 1995

5340-66-150-3932
Butt Hinge

661503932
NO PRIMARY REF 66-150-3932: RNCC: 3 | RNVC: 2
04083502: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-093-5690
Spacing Threaded Standoff

660935690
700-190: RNCC: 3 | RNVC: 2
700-190A: RNCC: 3 | RNVC: 2

2 Mar 1984

5340-66-142-4614
Mounting Plate

661424614
511280: RNCC: 3 | RNVC: 2
471-90423-504: RNCC: 3 | RNVC: 2

20 Aug 1996

5340-66-138-9676
Clamp

661389676
297KB26P2: RNCC: 3 | RNVC: 2
0050-00-029-7262: RNCC: C | RNVC: 1

3 Dec 1993

5340-66-126-2346
Lock-Release Lever

661262346
6R3-42816-00: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-66-156-3335
Mounting Plate

661563335
BMA-A02-639-001: RNCC: 3 | RNVC: 2

31 Oct 2007

5340-66-160-7763
Mounting Bracket

661607763
61141931-003: RNCC: 3 | RNVC: 2
61141931-003: RNCC: 5 | RNVC: 2

5 Dec 2012

5340-66-155-6965
Mounting Bracket

661556965
BMA-A05-1415-02: RNCC: 3 | RNVC: 2

11 May 2007

5340-66-151-3892
Plb (Ki Hand Strap

661513892
630A00038-000-01: RNCC: 3 | RNVC: 2

7 Feb 2005

5340-66-120-3948
Tie Down Bracket

661203948
DE580180639: RNCC: 3 | RNVC: 2
DE580160233: RNCC: C | RNVC: 1

12 Apr 1984

5340-66-161-3137
Access Cover

661613137
PDA HSA005913: RNCC: 3 | RNVC: 2
HSA005913: RNCC: 5 | RNVC: 2

9 Sep 2013

5340-66-011-6394
Barrel Bolt

660116394
335: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-155-5136
Bumper

661555136
1 143 547: RNCC: 3 | RNVC: 2

4 Apr 2007

5340-66-149-5702

5340-66-122-6958
Support Hook

5340-66-122-4396
Retaining Strap

5340-66-090-7882
Dust And Moist Boot

5340-66-101-6369
Handwheel

661016369
5: RNCC: 3 | RNVC: 2

7 Jun 1979

5340-66-139-8502
General Purpose Resilient Mount

661398502
P471-90200-104-T05: RNCC: 3 | RNVC: 2

31 Aug 1994

5340-66-150-5807
Access Door Hinge

661505807
NO PRIMARY REF 66-150-5807: RNCC: 3 | RNVC: 2
00844492: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-150-0238
Swivel Caster

661500238
NO PRIMARY REF 66-150-0238: RNCC: 3 | RNVC: 2
00353005: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-153-4145
Mounting Bracket

661534145
15013098-02: RNCC: 3 | RNVC: 2

15 Aug 2005

5340-66-160-3859
Mounting Plate

661603859
BMP-A26-2004-01: RNCC: 3 | RNVC: 2

4 Jul 2012

5340-66-138-8217
Mechanical Stop

661388217
196640-03840: RNCC: 3 | RNVC: 2

21 Apr 1994

5340-66-019-5656
Expansion Plug

660195656
TYPE A: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-063-4374
Plain Solid Disk

660634374
1251-30A: RNCC: 3 | RNVC: 2

4 Nov 1973

5340-66-082-6875
S Threaded Standoff

5340-66-158-1662
Mounting Plate

661581662
BDI 30400-3-2-2P: RNCC: 3 | RNVC: 2

10 Sep 2009

5340-66-142-9674
Angle Bracket

661429674
658/2/06409/001: RNCC: 3 | RNVC: 2

29 Apr 1997

5340-66-157-4651
Catch Strike

661574651
V01-01-07-01-01: RNCC: 3 | RNVC: 2

26 Nov 2008

5340-66-158-1582
Mounting Bracket

661581582
FBEA-LH-001: RNCC: 3 | RNVC: 2

8 Sep 2009

5340-66-154-7856
Crank Handle

661547856
15006358: RNCC: 3 | RNVC: 2

5 Sep 2006

5340-66-143-4293
Door Facade

661434293
492459: RNCC: 3 | RNVC: 2

24 Apr 1998

5340-66-140-7533
Slide Track

661407533
004-006-2: RNCC: 3 | RNVC: 2

7 Mar 1996

5340-66-148-9038
Protective Boot

661489038
10022036: RNCC: 3 | RNVC: 2

27 Nov 2002

5340-66-042-3165
Angle Bracket

660423165
548-1359-002: RNCC: 3 | RNVC: 2

18 Aug 1971

5340-66-153-2747
Mounting Bracket

661532747
A210 0286-2: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-050-8363
Hi Fitting Assembly

660508363
C4WM1136-4: RNCC: 3 | RNVC: 2

20 May 1972

5340-66-096-9090
Escutcheon Plate

660969090
13717-1: RNCC: 3 | RNVC: 2

7 May 1978

5340-66-122-4423
U Bracket

5340-66-160-2223
Mounting Plate

661602223
BMP-A05-3003-01: RNCC: 3 | RNVC: 2

1 May 2012

5340-66-154-2763
Access Cover

661542763
S0013A1E1840-003: RNCC: 3 | RNVC: 2

11 Apr 2006

5340-66-156-7676
Locking Stay

661567676
471-51631-22: RNCC: 3 | RNVC: 2
524546: RNCC: 5 | RNVC: 2

27 Mar 2008

5340-66-146-5177
Cover

661465177
370414-000: RNCC: 3 | RNVC: 2

13 Jun 2000

5340-66-128-8175
Mounting Bracket

661288175
0751-28-001-2564: RNCC: 3 | RNVC: 2
071431: RNCC: 5 | RNVC: 2

22 Oct 1993

5340-66-154-2679
Access Cover

661542679
S0007A1E1836-003: RNCC: 3 | RNVC: 2

10 Apr 2006

5340-66-155-2783
Heati Tray Assembly

661552783
MR-0028: RNCC: 3 | RNVC: 2

12 Feb 2007

5340-66-134-6218
Caster Wheel

661346218
73A-22846-10: RNCC: 3 | RNVC: 2

17 Dec 1991

5340-66-147-7926
Mounting Bracket

661477926
F/2888-565-002A: RNCC: 3 | RNVC: 2
Q EDE F/2888-565-002A: RNCC: 5 | RNVC: 2

24 Sep 2001

5340-66-158-0162
Mounting Bracket

661580162
1728-BH-0884-01: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-66-154-6779
Access Cover

661546779
VTR251-2TSUB14F4T19-7IIINM40W3P-: RNCC: 3 | RNVC: 1

11 Aug 2006

5340-66-131-7459
Loop Clamp

661317459
946.31.01.108: RNCC: 3 | RNVC: 2
N311-14: RNCC: 3 | RNVC: 2

17 Mar 1989

5340-66-160-9205
Angle Bracket

661609205
15013485-07: RNCC: 3 | RNVC: 2

6 Mar 2013

5340-66-146-3515
Strap

661463515
00-240503B-180: RNCC: 3 | RNVC: 2

12 Apr 2000

5340-66-158-8014
Mounting Bracket

661588014
P0006487: RNCC: 3 | RNVC: 2

4 Aug 2010

5340-66-114-6887
Angle Bracket

5340-66-019-5649
Expansion Plug

660195649
TYPE A: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-158-7649
Mounting Bracket

661587649
BMA-A08-0329-01: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-66-159-1957
Mounting Bracket

661591957
042513A-00: RNCC: 3 | RNVC: 2

29 Mar 2011

5340-66-134-8324
Dust And Moisture Seal Protective Cap-Plug

661348324
Z0433-11-90: RNCC: 3 | RNVC: 2

9 Jul 1990

5340-66-028-1695
Bail Handle

660281695
WELDOM372: RNCC: 3 | RNVC: 1
04299600: RNCC: 5 | RNVC: 2
0406 5902: RNCC: 5 | RNVC: 2

1 Jan 1968

5340-66-155-8857
Bumper

661558857
471-50807-192: RNCC: 3 | RNVC: 2
506096: RNCC: 5 | RNVC: 2

25 Jun 2007

5340-66-149-2001
Mounting Bracket

661492001
DE251580003: RNCC: 3 | RNVC: 2
02159-005: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-66-088-2324
General Purpose Resilient Mount

660882324
1213-56957: RNCC: 3 | RNVC: 2

11 May 1975

5340-66-158-8940
Mounting Bracket

661588940
JYG0822: RNCC: 3 | RNVC: 2

30 Sep 2010

5340-66-150-8211
Snap Hook

661508211
NO PRIMARY REF 66-150-8211: RNCC: 3 | RNVC: 2
164048: RNCC: 5 | RNVC: 2

14 Aug 2003

5340-66-146-3954
Clip

661463954
813.1: RNCC: 3 | RNVC: 2

4 May 2000

5340-66-159-4614
Retaining Strap

661594614
1500-04-0300C1: RNCC: 3 | RNVC: 2
QVRL1500040300C1: RNCC: 5 | RNVC: 2

26 Jul 2011

5340-66-146-2054
Mounting Bracket

661462054
487 0109-19: RNCC: 3 | RNVC: 2

14 Feb 2000

5340-66-087-2585
Spring Clip

660872585
19-1756: RNCC: 3 | RNVC: 2

2 Jun 1975

5340-66-159-7200
Manual Control Handle

661597200
3004-0050: RNCC: 3 | RNVC: 2

5 Jan 2012

5340-66-138-6939
Angle Bracket

661386939
120270-07900: RNCC: 3 | RNVC: 2

18 Mar 1994

5340-66-019-5637
Expansion Plug

660195637
TYPE A: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-155-2256
Mounting Bracket

661552256
471-20026-100: RNCC: 3 | RNVC: 2
511180: RNCC: 5 | RNVC: 2

25 Jan 2007

5340-66-155-9137
Runner

661559137
471-50809-240: RNCC: 3 | RNVC: 2
504054: RNCC: 5 | RNVC: 2

27 Jun 2007

5340-66-127-8420
Actuator Plug

661278420
EX20048536: RNCC: 3 | RNVC: 2

3 Mar 1987

5340-66-152-3789
As Extended Bracket

661523789
DE251930010: RNCC: 3 | RNVC: 2

14 Oct 2004

5340-66-160-9169
Mounting Bracket

661609169
15008328: RNCC: 3 | RNVC: 2

6 Mar 2013

5340-66-146-5264
Polarity Cap

661465264
0110143000000: RNCC: 3 | RNVC: 2

23 Jun 2000

5340-66-147-3762
General Purpose Access Door

661473762
0009305007: RNCC: 3 | RNVC: 2

11 Apr 2001

5340-66-155-6477
Angle Bracket

661556477
X50RU296M: RNCC: 3 | RNVC: 2

2 May 2007

5340-66-154-6111
Locking Bracket

661546111
008-02004-001: RNCC: 3 | RNVC: 2

24 Jul 2006

5340-66-136-4679
Dust And Moisture Seal Protective Plug

661364679
CES17673ITEM22: RNCC: 3 | RNVC: 2
DUSTPLUG,MALE40MM.PT.NO H: RNCC: 5 | RNVC: 2

24 Mar 1993

5340-66-161-2197
Mounting Bracket

661612197
KB50S0417-33: RNCC: 3 | RNVC: 2

29 Jul 2013

5340-66-155-0219
Manual Control Handle

661550219
471-40216-103: RNCC: 3 | RNVC: 2
509163: RNCC: 5 | RNVC: 2

14 Nov 2006

5340-66-146-9091
Clamp Universal

661469091
K4-1: RNCC: 3 | RNVC: 2

2 Oct 2000

5340-66-159-8035
General Purpose Resilient Mount

661598035
A755: RNCC: 3 | RNVC: 2
BMA-H08-0017-01: RNCC: 5 | RNVC: 2

21 Feb 2012

5340-66-157-4779
Latch Bar

661574779
PA-31-150-DP: RNCC: 3 | RNVC: 2

27 Nov 2008

5340-66-104-2199
Mounting Plate

661042199
AR15-010: RNCC: 3 | RNVC: 2

7 Aug 1971

5340-66-134-7765
General Purpose Access Door

661347765
DE580160651: RNCC: 3 | RNVC: 2

8 Jun 1990

5340-66-155-8447
Section Block Clamp

661558447
471-50822-101: RNCC: 3 | RNVC: 2
502785: RNCC: 5 | RNVC: 2

14 Jun 2007

5340-66-116-6094
Loop Clamp

661166094
29000/382-9: RNCC: 2 | RNVC: 2
29000/382-9: RNCC: 3 | RNVC: 2
29000/382-9: RNCC: 3 | RNVC: 2

23 Feb 1983

5340-66-044-6207
Retaining Strap

660446207
180-3-4: RNCC: 3 | RNVC: 2
H313-3-4: RNCC: 3 | RNVC: 2

1 Aug 1973

5340-66-161-0065
Stow Shelf Assembly

661610065
AM11020-1: RNCC: 3 | RNVC: 2

16 Apr 2013

5340-66-150-4132
Screw Thread Insert And Tool Assortment

661504132
NO PRIMARY REF 66-150-4132: RNCC: 3 | RNVC: 2
00131155: RNCC: 5 | RNVC: 2

15 Apr 2003

5340-66-056-1846
Spring Tension Clip

660561846
311941125A: RNCC: 3 | RNVC: 2

23 Jan 1973

5340-66-131-6863
Hinge

661316863
3242662R3: RNCC: 3 | RNVC: 2

16 Mar 1989

5340-66-135-7065
Rod End Connector

661357065
AD152: RNCC: 3 | RNVC: 2

7 Jan 1992

5340-66-154-5177
Elastic Strap

661545177
91849637: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-66-133-3112
Mounting Bracket

661333112
553.10.09.386: RNCC: 3 | RNVC: 2

15 Oct 1996

5340-66-010-1407
Barrel Bolt

660101407
333: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-150-0218
Rigid Caster

661500218
NO PRIMARY REF 66-150-0218: RNCC: 3 | RNVC: 2
00164662: RNCC: 5 | RNVC: 2

11 Apr 2003

5340-66-150-0758
Expansion Shield

661500758
NO PRIMARY REF 66-150-0758: RNCC: 3 | RNVC: 2
01820108: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-076-9534
Retaining Strap

660769534
1611433-1: RNCC: 3 | RNVC: 2

7 Oct 1974

5340-66-143-3756
Drive Pin

661433756
9608-E: RNCC: 3 | RNVC: 2

21 Apr 1998

5340-66-157-6755
Dust Cap

661576755
D-2608: RNCC: 3 | RNVC: 2

6 Feb 2009

5340-66-105-6841
Strapping

661056841
57711-4: RNCC: 3 | RNVC: 1
LB12: RNCC: 3 | RNVC: 2

12 Feb 1981

5340-66-148-4077
Lock Bolt

661484077
50 027 160 301: RNCC: 3 | RNVC: 2

21 Mar 2002

5340-66-145-9641
Boatdeck Bracket

661459641
MH-A613-0001-B2: RNCC: 3 | RNVC: 2

6 Nov 2001

5340-66-161-2984
Access Cover

661612984
3040B167-001: RNCC: 3 | RNVC: 2

27 Aug 2013

5340-66-158-4754
Dust And Moisture Seal Protective Cap

661584754
A5800TRC: RNCC: 3 | RNVC: 2
D152 ITEM 74: RNCC: 5 | RNVC: 2

11 Feb 2010

5340-66-147-7570
Protector Strip

661477570
6671259-1: RNCC: 3 | RNVC: 2
6671259-1: RNCC: C | RNVC: 1

9 Aug 2001

5340-66-147-9410
Female Camlock To H

661479410
AC100: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-66-120-6755
Fwd. Hinge Half

661206755
12S1796-11-142: RNCC: 3 | RNVC: 2

13 Oct 1986

5340-66-145-9976
Dust And Moisture Seal Protective Cap

661459976
005368-001: RNCC: 3 | RNVC: 2

3 Mar 2000

5340-66-145-9595
Connector

661459595
BD-50-NG: RNCC: 3 | RNVC: 2

25 Oct 2001

5340-66-149-3045
Permanent Magnet

661493045
NO PRIMARY REF 66-149-3045: RNCC: 3 | RNVC: 2
09160704: RNCC: 5 | RNVC: 2

26 Mar 2003

5340-66-147-9407
Female Camlock To H

661479407
AC050: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-66-105-4735
Mounting Bracket

661054735
450408001-01: RNCC: 3 | RNVC: 2

18 Oct 1989

5340-66-146-5545
Seal Retaining Plate

661465545
MB B061 0870: RNCC: 3 | RNVC: 2

15 Jun 2000

5340-66-140-0614
Plain Solid Disk

661400614
0110601050000D1: RNCC: 3 | RNVC: 2

31 Oct 1994

5340-66-155-6053
Mounting Bracket

661556053
X50HB22P2: RNCC: 3 | RNVC: 2

24 Apr 2007

5340-66-153-3582
General Purpose Resilient Mount

661533582
AB100: RNCC: 3 | RNVC: 2
01493904: RNCC: 5 | RNVC: 2

25 Jul 2005

5340-66-149-0749
Buckle

661490749
0596: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-66-025-0424

5340-66-159-7204
Webbing Strap

661597204
3004-0048: RNCC: 3 | RNVC: 2

5 Jan 2012

5340-66-155-5186
Hand Crank

661555186
471-41243-913: RNCC: 3 | RNVC: 2
512585: RNCC: 5 | RNVC: 2

4 Apr 2007

5340-66-157-6525
Dust And Moisture Seal Protective Cap

661576525
BDI 26200-3-3: RNCC: 3 | RNVC: 2

30 Jan 2009

5340-66-157-4126
General Purpose Resilient Mount

661574126
ATS138013: RNCC: 3 | RNVC: 2

13 Nov 2008

5340-66-142-4611
Mounting Plate

661424611
471-90423-303: RNCC: 3 | RNVC: 2
511268: RNCC: 3 | RNVC: 2

20 Aug 1996

5340-66-155-8424
Angle Bracket

661558424
471-51805-117T02: RNCC: 3 | RNVC: 2
504271: RNCC: 5 | RNVC: 2

14 Jun 2007

5340-66-068-2573
General Purpose Resilient Mount

5340-66-129-9811
Quick Release Plunger

661299811
ADE(P)2-248/1: RNCC: 3 | RNVC: 2

31 Aug 1987

5340-66-148-8902
Pipe Hanger

661488902
5510-1A-PC1: RNCC: 3 | RNVC: 2

15 Nov 2002

5340-66-143-8710
Access Cover

661438710
6.036.135: RNCC: 3 | RNVC: 2

2 Sep 1997

5340-66-159-5195
Mounting Bracket

661595195
MM&D 7017368: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-66-120-8282
Expansion Plug

661208282
200394: RNCC: 3 | RNVC: 2

20 Apr 1984

5340-66-131-7361
Access Cover

661317361
553.30.09.266: RNCC: 3 | RNVC: 2
553.30.09.238: RNCC: 5 | RNVC: 9

23 Nov 1988

5340-66-135-4074
Bridge Clamp

661354074
119.40.07.626: RNCC: 3 | RNVC: 2

25 Nov 1991

5340-66-061-6651
Synchro Clamp

660616651
76185A: RNCC: 3 | RNVC: 2

15 Jul 1973

5340-66-104-3774
Threaded Rod End

661043774
DA84024001: RNCC: 3 | RNVC: 2

19 Oct 1984

5340-66-160-1546
Retaining Strap

661601546
BP-5685148: RNCC: 3 | RNVC: 2

18 Apr 2012

5340-66-128-6830
Lamp Support

661286830
DE620030010: RNCC: 3 | RNVC: 2

29 Jun 1993

5340-66-099-8376

5340-66-138-8230
Nonmetallic Bumper

661388230
196640-05440: RNCC: 3 | RNVC: 2

21 Apr 1994

5340-66-161-1502
Double Angle Bracket

661611502
53692M: RNCC: 3 | RNVC: 2

4 Jul 2013

5340-66-154-8031
Sliding Block

661548031
471-60801-109: RNCC: 3 | RNVC: 2
506678: RNCC: 5 | RNVC: 2

7 Sep 2006

5340-66-155-9187
Double Angle Bracket

661559187
471-50810-156: RNCC: 3 | RNVC: 2
506966: RNCC: 5 | RNVC: 2

28 Jun 2007

5340-66-127-3628
Aft Brace

661273628
016AMR407-3: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-66-139-9213
Caliper Brake

661399213
90.18300B01.A: RNCC: 3 | RNVC: 2
707888: RNCC: 5 | RNVC: 2

9 Sep 1994

5340-66-153-2742
Mounting Bracket

661532742
A210 0286-1: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-027-7562
Loop Clamp

660277562
H162BN03: RNCC: 3 | RNVC: 1
3: RNCC: 3 | RNVC: 1

1 Jan 1968

5340-66-024-0433
Door Closer

660240433
400: RNCC: 3 | RNVC: 2
80: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-154-4664

5340-66-156-0748
General Purpose Resilient Mount

661560748
M111145: RNCC: 3 | RNVC: 2
01398631: RNCC: 5 | RNVC: 2

17 Aug 2007

5340-66-103-0141
Dust And Moisture Seal Boot

661030141
602466: RNCC: 3 | RNVC: 2

16 Jul 1979

5340-66-121-0138
Ind Sleeve Assembly

661210138
MLF787: RNCC: 3 | RNVC: 2

7 Jul 1984

5340-66-098-8675

5340-66-120-7182

5340-66-146-9140
Filter Minder Mount

661469140
3905161S: RNCC: 3 | RNVC: 2
3905161S: RNCC: 5 | RNVC: 2
3304584S: RNCC: 5 | RNVC: 9

4 Oct 2000

5340-66-150-0753
Expansion Shield

661500753
NO PRIMARY REF 66-150-0753: RNCC: 3 | RNVC: 2
01817108: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-156-5507
Mounting Plate

661565507
471-62810-142: RNCC: 3 | RNVC: 2
471-62810-142: RNCC: 5 | RNVC: 2
501421: RNCC: 5 | RNVC: 2

11 Jan 2008

5340-66-150-0747
Expansion Shield

661500747
NO PRIMARY REF 66-150-0747: RNCC: 3 | RNVC: 2
08798819: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-66-149-5773
Permanent Magnet

661495773
NO PRIMARY REF 66-149-5773: RNCC: 3 | RNVC: 2
312203: RNCC: 5 | RNVC: 2
47384500: RNCC: 5 | RNVC: 2

7 Apr 2003

5340-66-151-6302
Manual Control Handle

661516302
NO PRIMARY REF 66-151-6302: RNCC: 3 | RNVC: 2
EO11532S: RNCC: 5 | RNVC: 2

28 Aug 2003

5340-66-142-0007
Mounting Plate

661420007
5610433: RNCC: 3 | RNVC: 2

9 Feb 1996

5340-66-156-3515
Manual Control Lever

661563515
15015120: RNCC: 3 | RNVC: 2

2 Nov 2007

5340-66-112-7618
Mounting Plate

661127618
576.10.09.125: RNCC: 3 | RNVC: 2

14 Mar 1995

5340-66-133-3668

5340-66-144-4805
Webbing Strap

661444805
11-240317A-50: RNCC: 3 | RNVC: 2

11 Nov 1998

5340-66-155-3284
Mounting Bracket

661553284
DE252220009: RNCC: 3 | RNVC: 2

5 Mar 2007

5340-66-141-4993
Door Strut

661414993
004-394: RNCC: 3 | RNVC: 2

24 May 1996

5340-66-143-7280
Radio Freque Screen

661437280
658/2/05894/000: RNCC: 3 | RNVC: 2

3 Jul 1997

5340-66-145-9503
Earthing Strap

661459503
2888-700-011B: RNCC: 3 | RNVC: 2
Q EDE 2888-700-011B: RNCC: 5 | RNVC: 2

16 Oct 2001

5340-66-151-3327
Blanking Bung

661513327
WTIS: RNCC: 3 | RNVC: 2

17 Dec 2003

5340-66-133-3103
Mounting Bracket

5340-66-156-5065
Mounting Bracket

661565065
6301589: RNCC: 3 | RNVC: 2
15012936: RNCC: 5 | RNVC: 2

13 Dec 2007

5340-66-156-3548
Spring Tension Clip

661563548
15016784: RNCC: 3 | RNVC: 2

7 Nov 2007

5340-66-060-8153
Dust And Moisture Seal Protective Cap-Plug

660608153
4CP: RNCC: 3 | RNVC: 2

7 Mar 1975

5340-66-154-8238
Bask Guard Assembly

661548238
15007943: RNCC: 3 | RNVC: 2

13 Sep 2006

5340-66-155-5657
Mounting Bracket

661555657
656975: RNCC: 3 | RNVC: 2

16 Apr 2007

5340-66-092-5915

5340-66-038-1822
Manual Contro Lever

5340-66-153-2647
Mounting Bracket

661532647
A210 0291: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-157-4145
Access Cover

661574145
6GSDEFHYDCOVER: RNCC: 3 | RNVC: 2

13 Nov 2008

5340-66-150-9695
Mounting Bracket

661509695
306978: RNCC: 3 | RNVC: 2
306978: RNCC: 5 | RNVC: 2

12 Jun 2004

5340-66-158-5629
Access Cover

661585629
P10257: RNCC: 3 | RNVC: 2

25 Mar 2010

5340-66-132-1613
Nonmetallic Solid Wheel

661321613
VPB200/P: RNCC: 3 | RNVC: 2

24 May 1989

5340-66-145-2512
Manual Control Handle

661452512
B-135372: RNCC: 3 | RNVC: 2

26 Aug 1999

5340-66-156-6039
Mounting Bracket

661566039
FD0767: RNCC: 3 | RNVC: 2
FD0767: RNCC: 5 | RNVC: 2

5 Feb 2008

5340-66-138-8076
Mounting Bracket

661388076
120270-77970: RNCC: 3 | RNVC: 2

21 Apr 1994

5340-66-153-2673
Mounting Bracket

661532673
A210 0281: RNCC: 3 | RNVC: 2

5 Jul 2005

5340-66-160-6990
Door Closer

661606990
7714SSS: RNCC: 3 | RNVC: 2

25 Oct 2012

5340-66-085-3240

5340-66-159-8148
Access Cover

661598148
BMA-A10-0141-01: RNCC: 3 | RNVC: 2

22 Feb 2012

5340-66-093-5691
Spacing Threaded Standoff

660935691
700-189: RNCC: 3 | RNVC: 2
700-189A: RNCC: 3 | RNVC: 2

2 Mar 1984

5340-66-141-1048
General Purpose Resilient Mount

661411048
66639: RNCC: 3 | RNVC: 2
C50/42A: RNCC: 3 | RNVC: 2

14 Sep 1995

5340-66-143-4312
Manifold Block

661434312
492630: RNCC: 3 | RNVC: 2

27 Apr 1998

5340-66-141-6115
Stop Plate

661416115
008-523: RNCC: 3 | RNVC: 2
008-523: RNCC: 3 | RNVC: 2

25 Sep 1996

5340-66-152-3416
Antipilferage Seal Locking Wire

661523416
BR13840: RNCC: 3 | RNVC: 2

11 Sep 2004

5340-66-123-4404
Access Cover

661234404
557.51.09.075: RNCC: 3 | RNVC: 2

4 Dec 1995

5340-66-139-0375
Blank Plate

661390375
X50RU220A: RNCC: 3 | RNVC: 2

27 Jan 1994

5340-66-025-1541
Dust And Moisture Seal Boot

660251541
140928R1: RNCC: 3 | RNVC: 2

1 Jan 1968

5340-66-139-2055
Access Cover

661392055
406KB373A: RNCC: 3 | RNVC: 2

27 May 1994

5340-66-158-7706
Mounting Bracket

661587706
BMA-A05-1672-01: RNCC: 3 | RNVC: 2

29 Jul 2010

5340-66-011-6270
Headle Straight Rod

5340-66-151-0955
Mounting Plate

661510955
LTA-A20-076: RNCC: 3 | RNVC: 2
LTA-A20-076-001: RNCC: 3 | RNVC: 2

13 May 2003

5340-66-159-4594
Webbing Strap

661594594
1100-00-0100C2: RNCC: 3 | RNVC: 2
QVRL1100000100C2: RNCC: 5 | RNVC: 2
1100-00-0100C2: RNCC: 6 | RNVC: 9

26 Jul 2011

5340-66-125-2602
Double Angle Bracket

661252602
DE580180746: RNCC: 3 | RNVC: 2

17 Dec 1985

5340-66-072-1785
Barrel Bolt

660721785
57LAN952X38CP: RNCC: 3 | RNVC: 1
ZENITH HBB1038: RNCC: 5 | RNVC: 2
ARCHUR B138CPP: RNCC: 5 | RNVC: 2
04048204: RNCC: 5 | RNVC: 2

5 Jul 1974

5340-66-154-7587
Spring Holder

661547587
15003962: RNCC: 3 | RNVC: 2

30 Aug 2006

5340-66-077-9374
Door Hook

660779374
12-92007: RNCC: 3 | RNVC: 2

20 Oct 1974

5340-66-155-1680
Support Ring

661551680
347 307: RNCC: 3 | RNVC: 2

19 Dec 2006

5340-66-160-7850
Double Angle Bracket

661607850
15019197: RNCC: 3 | RNVC: 2

10 Dec 2012

5340-66-160-6436
Mounting Plate

661606436
S70A53HSD009-1: RNCC: 3 | RNVC: 2

25 Sep 2012

5340-66-159-5921
Bumper

661595921
A1-19550-117/2: RNCC: 3 | RNVC: 2

19 Oct 2011

Load More Results